/*
* ========== Copyright Header Begin ==========================================
* 
* OpenSPARC T2 Processor File: err_tcc_stick_halt_diag.s
* Copyright (C) 1995-2007 Sun Microsystems, Inc. All Rights Reserved
* 4150 Network Circle, Santa Clara, California 95054, U.S.A.
*
* DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER. 
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
*
* For the avoidance of doubt, and except that if any non-GPL license 
* choice is available it will apply instead, Sun elects to use only 
* the General Public License version 2 (GPLv2) at this time for any 
* software where a choice of GPL license versions is made 
* available with the language indicating that GPLv2 or any later version 
* may be used, or where a choice of which version of the GPL is applied is 
* otherwise unspecified. 
*
* Please contact Sun Microsystems, Inc., 4150 Network Circle, Santa Clara, 
* CA 95054 USA or visit www.sun.com if you need additional information or 
* have any questions. 
*
* 
* ========== Copyright Header End ============================================
*/
#define MAIN_PAGE_HV_ALSO
#define MAIN_PAGE_NUCLEUS_ALSO
#define  CETER_DE       0x2000000000000000
#define  ASI_CETER              0x4C
#define  CETER_VA               0x18
#define  ASI_CERER              0x4C
#define  CERER_VA               0x10
#define TCCU_ERR_EN     0x80400000


!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

! Interrupt trap handler

#define H_HT0_Interrupt_Level_14_0x4e
#define My_HT0_Interrupt_Level_14_0x4e \
    rd %sys_tick, %l0; \
    add %g0, 1, %i0; \
    retry; \
    nop

#define H_HT0_Sw_Recoverable_Error_0x40
#define SUN_H_HT0_Sw_Recoverable_Error_0x40 \
    rd %sys_tick, %l0; \
    ldxa  [%g0]0x4C, %l7; \
    add %g0, 1, %i1; \
    retry; \
    nop

#include "hboot.s"

/************************************************************************
   Test case code start
 ************************************************************************/

.text
.global main

main:		/* test begin */

    ta T_CHANGE_HPRIV 
    mov %g0, %i0
    mov %g0, %i1
! Enable tccd errors.
  add %g0, 0x80, %o2   
  add  %g0, CERER_VA, %g3  
  stxa %o2, [%g3]ASI_CERER

! Turn off IE bit so the sw_recoverable err trap is not taken
!again and again
  rdpr %pstate, %l1
  wrpr %l1, 0x2, %pstate


  !! set CETER.DE
  setx CETER_DE, %l0, %o2
  add %g0, CETER_VA, %g3
  stxa %o2, [%g3]ASI_CETER

!! Enable error injection
  setx TCCU_ERR_EN, %l0, %l5
  or %l5, 0x1, %l5   ! set mask bit 0 t
  stxa %l5, [%g0]ASI_ERR_INJ

set_stick:
    setx 0x50000000, %g1, %g2
    add %g2, 0x200, %g3
    wr %g2, %g0, %sys_tick

set_stick_cmpr:
    wr %g0, %g3, %sys_tick_cmpr		!! err will be injected

    wrhpr %g0, 0x0, %halt

! set the priv bit to read the softint register 
   rdpr %pstate, %l1
   wrpr %l1, 0x4, %pstate

!! get out of hp mode since the int 14 trap won't be taken in hpriv mode
  rdhpr %hpstate, %l1
  wrhpr %l1, 0x4, %hpstate

   add %i2, 10, %i3
   add %i2, 10, %i3
   add %i2, 10, %i3
   add %i2, 10, %i3

    
    brnz %i0, FAIL    ! chk int_14 trap not taken
    brz %i1, FAIL     !chk sw_recoverable trap is taken
    nop

!! Chk softint register is clear. We can chk for only SM bit not being set, but
!! since there is nothing in the diag to set the TM or int_level bits, the register
!! shd be clear.
    rd %softint, %l1
    brnz %l1, FAIL
    nop


    EXIT_GOOD
    nop

FAIL:
    EXIT_BAD
    nop

/************************************************************************
   Test case data start
 ************************************************************************/
.data
user_data_start:
.word 0xB52E8698
.end