verif/diag/assembly/arch/error/l2/n2_err_L2_LVC_cecc.s

/*
* ========== Copyright Header Begin ==========================================
*
* OpenSPARC T2 Processor File: n2_err_L2_LVC_cecc.s
* Copyright (C) 1995-2007 Sun Microsystems, Inc. All Rights Reserved
* 4150 Network Circle, Santa Clara, California 95054, U.S.A.
*
* DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
*
* For the avoidance of doubt, and except that if any non-GPL license
* choice is available it will apply instead, Sun elects to use only
* the General Public License version 2 (GPLv2) at this time for any
* software where a choice of GPL license versions is made
* available with the language indicating that GPLv2 or any later version
* may be used, or where a choice of which version of the GPL is applied is
* otherwise unspecified.
*
* Please contact Sun Microsystems, Inc., 4150 Network Circle, Santa Clara,
* CA 95054 USA or visit www.sun.com if you need additional information or
* have any questions.
*
*
* ========== Copyright Header End ============================================
*/
#define MAIN_PAGE_HV_ALSO

#define  L2_ENTRY_PA      0x517590000
#define  TEST_DATA        0x555555555555555
#define  L2_ES_W1C_VALUE  0xc03ffff800000000
#define  L2ES_LVC         34


#include "hboot.s"
#include "asi_s.h"
#include "err_defines.h"

.text
.global  main


main:


  ! Boot code does not provide TLB translation for IO address space
  ta    T_CHANGE_HPRIV

  setx  L2_ES_W1C_VALUE, %l0, %g4

  ! Now access L2 control and status registers
disable_l1:
  ldxa  [%g0] ASI_LSU_CONTROL, %l0
  ! Remove the lower 2 bits (I-Cache and D-Cache enables)
  andn  %l0, 0x3, %l0
  stxa  %l0, [%g0] ASI_LSU_CONTROL

  ! Write 1 to clear L2 Error status registers

clear_l2_ESR:
  setx  L2ES_PA0, %l3, %l4
  stx   %g4, [%l4]
  nop


set_L2_Directly_Mapped_Mode:
  setx  L2CS_PA0, %l6, %g1
  mov   0x2, %l0
  stx   %l0, [%g1]


store_to_L2_way0:
  setx  TEST_DATA, %l0, %g5
  setx  0x2200aa00, %l0, %g1
  stx %g5, [%g1]
  stx %g5, [%g1+8]
  membar #Sync


generate_VD_addr:
  ! Generate L2 VD Diag read address
  ! Addressing: [39:32] See PRM, [22] 1 for V/D, [17:8] set, [7:6] bank, [2:0] = 0
  setx  0x3ffc0, %l0, %l2       ! Mask for extracting [17:6]
  and   %g1, %l2, %l7

  mov   0xb6, %l0
  sllx  %l0, 32, %l0            ! Bits [39:32]
  or    %l7, %l0, %l7

  mov   0x1, %l0
  sllx  %l0, 22, %l0            ! Bit [22]
  or    %l7, %l0, %l7

read_l2_VD_diag:
  ldx   [%l7], %l6

 ! Now confirm it is stored to way 0
  setx  0xffff, %l0, %l2      ! Mask for [16:0]
  and   %l6, %l2, %l6         ! Valid bits at [31:16]

  clr   %g2                   ! %g2 will store the "way"

  ! Direct comparison - avoid loops to save run time
  cmp   %l6, 0x1
  bne   test_fail
  nop

way_found:
  ! Read L2 Data Diag - %g2 has the "way"
  ! Addressing: [39:32] See PRM, [22] odd/even word, [21:18] way, [17:8] set, [7:6] bank, [5:3] D-word, [2:0] = 0
  setx  0x3fff8, %l0, %l2       ! Mask for extracting [17:3]
  and   %g1, %l2, %g5

  sllx  %g2, 18, %l0            ! Position Way
  or    %g5, %l0, %g5

  mov   0xa3, %l0
  sllx  %l0, 32, %l0            ! Bits [39:32]
  or    %g5, %l0, %g5           ! %g5 has L2 Data Diag addressing


read_l2_data_diag:
  ldx   [%g5], %g6

  ! Flip one bit from the data field
  xor   %g6, 0x80, %g6          ! save on %g6 for future reference
write_back_with_error:
  stx   %g6, [%g5]

  ! Now set allocate bits for all other 15 ways (to ensure a write-back later)
set_allocate:
  mov   0x1, %l0
  sllx  %l0, 22, %l1            ! L2_VD and L2_UA addressing differ on bit 22
  xor   %l7, %l1, %l7           ! change %l7 from L2_VD to L2_UA address

read_l2_UA_diag:
  ldx   [%l7], %l6

  sllx  %l0, %g2, %l1           ! Shift "way" into its bit position
  not   %l1
  setx  0xffff,%l5, %g2
  and   %l1, %g2 , %l1         ! Allocate bits on [15:0]
  or    %l6, %l1, %l6           ! Write 1 to all other 15 ways' allocate bits

  ! also need to set ECC bits for Allocate bits (Bits [38:32])
set_ECC_Allocate:
  mov    0x7f, %l0
  sllx   %l0, 32, %l0
  xor    %l6, %l0, %l1
  or     %l6, %l1, %l6

write_l2_UA_diag:
  stx   %l6, [%l7]


  ! Now do another store with the same index but different tag - to force a Write-Back
error_address:
  mov   0x1, %l0
  sllx  %l0, 28, %l0
  xor   %g1, %l0, %l1             ! Flip bit 28 of previous L2 entry PA

  ! This should cause L2 LDWC (bit 51)
store_to_L2_with_error:
  st    %g3, [%l1]
  membar #Sync

enable_l1:
  ldxa  [%g0] ASI_LSU_CONTROL, %l0
  or    %l0, 0x3, %l0
  stxa  %l0, [%g0] ASI_LSU_CONTROL


  ! Compute expected value of L2 error status register
compute_expected_L2_ESR:
  mov   0x1, %l1
  sllx  %l1, L2ES_LVC, %l0
  sllx  %l1, L2ES_VEC, %l3       ! VEC bit
  or    %l0, %l3, %l0


  setx  L2ES_PA0, %l2, %l3


check_l2_ESR:
  ldx   [%l3], %l4

  setx   0xff00000000, %l5,%g2
  and   %l4, %g2, %l4
  cmp   %l4, %l0
  bne   %xcc, test_fail
  nop

  setx  L2EA_PA0, %l2, %l3
check_l2_EAR:
  ldx   [%l3], %l4

  ! Error address is the physical address of the cache line (PA[5:0] 0)
  ! comparison to be added
  andn  %g1, 0x3f, %l1
  nop

  ba    test_pass
  nop

/*******************************************************
 * Exit code
 *******************************************************/

test_pass:
ta  T_GOOD_TRAP

test_fail:
ta  T_BAD_TRAP