Initial commit of OpenSPARC T2 design and verification files.
[OpenSPARC-T2-DV] / verif / diag / assembly / arch / prm / tso / tso_directed / tso_n1_indirection2.s
/*
* ========== Copyright Header Begin ==========================================
*
* OpenSPARC T2 Processor File: tso_n1_indirection2.s
* Copyright (C) 1995-2007 Sun Microsystems, Inc. All Rights Reserved
* 4150 Network Circle, Santa Clara, California 95054, U.S.A.
*
* DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
* For the avoidance of doubt, and except that if any non-GPL license
* choice is available it will apply instead, Sun elects to use only
* the General Public License version 2 (GPLv2) at this time for any
* software where a choice of GPL license versions is made
* available with the language indicating that GPLv2 or any later version
* may be used, or where a choice of which version of the GPL is applied is
* otherwise unspecified.
*
* Please contact Sun Microsystems, Inc., 4150 Network Circle, Santa Clara,
* CA 95054 USA or visit www.sun.com if you need additional information or
* have any questions.
*
*
* ========== Copyright Header End ============================================
*/
#define tmp0 %i0
#define tmp1 %i1
#define tmp2 %i2
#define tmp3 %i3
#define global_cnt_reg %i4
#define addrA_reg %l0
#define addrC_reg %l2
#define test_reg %o4
#define test2_reg %o5
#define ITERATIONS 0x4
#include "hboot.s"
.global main
main:
setx addrA, tmp1, addrA_reg
setx addrC, tmp1, addrC_reg
set ITERATIONS, global_cnt_reg
th_fork(th_main,tmp1)
!=====================================================
th_main_0:
mov 0x20, test2_reg
loop00:
inc test2_reg
st test2_reg, [addrA_reg]
! BARRIER here
!=============
set barrier_code, tmp0
jmpl tmp0,%o7
nop
dec global_cnt_reg
brz global_cnt_reg, good_end
nop
ba loop00
nop
!=========================================================
#ifdef ZERO_THREE_SIX
th_main_3:
#else
th_main_1:
#endif
th_main_4:
mov 0x21, test2_reg
loop10: ! wait
ld [addrA_reg], test_reg
sub test_reg, test2_reg, tmp1
brnz tmp1, loop10
nop
st test_reg, [addrC_reg] ! store non-zero to C
inc test2_reg
! BARRIER here
!=============
set barrier_code, tmp0
jmpl tmp0,%o7
nop
dec global_cnt_reg
brz global_cnt_reg, good_end
nop
ba loop10 ! loop
nop
!=========================================================
#ifdef ZERO_THREE_SIX
th_main_6:
#else
th_main_2:
#endif
th_main_8:
mov 0x21, test2_reg
loop30:
ld [addrC_reg], test_reg ! load C until set
brz test_reg, loop30
nop
ld [addrA_reg], test_reg
subcc test_reg, test2_reg, %g0
bne bad_end
nop
inc test2_reg
st %g0, [addrC_reg] ! clear
st %g0, [addrA_reg] ! clear
! BARRIER here
!=============
set barrier_code, tmp0
jmpl tmp0,%o7
nop
dec global_cnt_reg
brz global_cnt_reg, good_end
nop
ba loop30 ! loop
nop
!============================================================
barrier_code:
setx barrier_data, tmp1, tmp2
sll global_cnt_reg, 0x3, tmp1
add tmp1, tmp2, tmp2
bloop1:
mov 0xff, tmp1
cas [tmp2], %g0, tmp1
brnz tmp1, bloop1
#ifdef PREFETCH ! lock the barrier counter
prefetch [tmp2], #n_reads
#else
nop
#endif
ld [tmp2 + 4], tmp3 ! increment
inc tmp3
st tmp3, [tmp2 + 4]
st %g0, [tmp2] ! unlock
bloop2:
ld [tmp2 + 4], tmp3 ! if 0
brz tmp3, bout2 ! somebody already reset it
sub tmp3, THREAD_COUNT, tmp3 ! subtract THREAD_COUNT
brnz tmp3, bloop2 ! if 0 we are out.
#ifdef PREFETCH
prefetch [tmp2], #n_reads
#else
nop
#endif
st %g0, [tmp2 + 4] ! clear the barrier counter
bout2:
jmpl %o7+8, %g0 ! return
nop
good_end:
ta T_GOOD_TRAP
bad_end:
ta T_BAD_TRAP
!==========================
.data
.global addrA
.align 0x40
addrA:
.word 0x0
.skip 0x100
.align 0x40
.global addrC
addrC:
.word 0x0
.skip 0x100
.global barrier_data
barrier_data:
.skip 0x100
.end