verif/env/common/verilog/checkers/l2siu/l2_siu_ras_chkr.v

// ========== Copyright Header Begin ==========================================
//
// OpenSPARC T2 Processor File: l2_siu_ras_chkr.v
// Copyright (C) 1995-2007 Sun Microsystems, Inc. All Rights Reserved
// 4150 Network Circle, Santa Clara, California 95054, U.S.A.
//
// * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
//
// This program is free software; you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation; version 2 of the License.
//
// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
// GNU General Public License for more details.
//
// You should have received a copy of the GNU General Public License
// along with this program; if not, write to the Free Software
// Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
//
// For the avoidance of doubt, and except that if any non-GPL license
// choice is available it will apply instead, Sun elects to use only
// the General Public License version 2 (GPLv2) at this time for any
// software where a choice of GPL license versions is made
// available with the language indicating that GPLv2 or any later version
// may be used, or where a choice of which version of the GPL is applied is
// otherwise unspecified.
//
// Please contact Sun Microsystems, Inc., 4150 Network Circle, Santa Clara,
// CA 95054 USA or visit www.sun.com if you need additional information or
// have any questions.
//
// ========== Copyright Header End ============================================
`ifdef SIU
`define TOP siu_top
`define TB_RST siu_top.reset
`else
`define TOP tb_top
`define TB_RST tb_top.reset
`endif


module sii_l2_ras_chkr();

reg no_l2siu_ras_chk ;
initial begin // {
    @(posedge `TOP.cpu.sii.iol2clk) ;
    if ($test$plusargs("ios_0in_ras_chk_off"))
        no_l2siu_ras_chk <= 1;
    else
        no_l2siu_ras_chk <= 0;
end //}

//  0in disable_checker no_l2siu_ras_chk -name cpu.sii_l2*data_ecc*
//  0in disable_checker no_l2siu_ras_chk -name cpu.sii_l2*ctag_ecc*
//  0in disable_checker no_l2siu_ras_chk -name cpu.l2_sio*ctag_ecc*
//  0in disable_checker no_l2siu_ras_chk -name cpu.l2_sio_data*parity*

`ifdef X_GUARD
`endif

/*************************************************************************
*
*  Check for ctag ecc   SII -> L2
*  For RDD, WRI
*
**************************************************************************/

wire sii_rdd_l0_p0 =  (`TOP.cpu.sii_l2t0_req[8] ^ `TOP.cpu.sii_l2t0_req[9] ^ `TOP.cpu.sii_l2t0_req[11] ^ `TOP.cpu.sii_l2t0_req[12] ^ `TOP.cpu.sii_l2t0_req[14] ^ `TOP.cpu.sii_l2t0_req[16] ^ `TOP.cpu.sii_l2t0_req[18] ^ `TOP.cpu.sii_l2t0_req[19] ^ `TOP.cpu.sii_l2t0_req[21] ^ `TOP.cpu.sii_l2t0_req[23] );

/*   0in custom
      -fire (($0in_rising_edge(sii_l2t0_req_vld)) && (sii_l2t0_req[24] == 1) && (sii_l2t0_req[25] == 0) && (sii_l2t0_req[26] == 0) && !(sii_rdd_l0_p0 == sii_l2b0_ecc[0]))
      -clock l2clk
      -message "ctag error for rdd in sii_l2:  p0 does not equal c0"
      -module cpu  -reset `TB_RST
      -name sii_l2_l0_ctag_ecc_rdd_p0
*/

wire sii_rdd_l0_p1 =  (`TOP.cpu.sii_l2t0_req[8] ^ `TOP.cpu.sii_l2t0_req[10] ^ `TOP.cpu.sii_l2t0_req[11] ^ `TOP.cpu.sii_l2t0_req[13] ^ `TOP.cpu.sii_l2t0_req[14] ^ `TOP.cpu.sii_l2t0_req[17] ^ `TOP.cpu.sii_l2t0_req[18] ^ `TOP.cpu.sii_l2t0_req[20] ^ `TOP.cpu.sii_l2t0_req[21] );

/*   0in custom
      -fire (($0in_rising_edge(sii_l2t0_req_vld)) && (sii_l2t0_req[24] == 1) && (sii_l2t0_req[25] == 0) && (sii_l2t0_req[26] == 0) && !(sii_rdd_l0_p1 == sii_l2b0_ecc[1]))
      -clock l2clk
      -message "ctag error for rdd in sii_l2:  p1 does not equal c1"
      -module cpu  -reset `TB_RST
      -name sii_l2_l0_ctag_ecc_rdd_p1
*/

wire sii_rdd_l0_p2 =  (`TOP.cpu.sii_l2t0_req[9] ^ `TOP.cpu.sii_l2t0_req[10] ^ `TOP.cpu.sii_l2t0_req[11] ^ `TOP.cpu.sii_l2t0_req[15] ^ `TOP.cpu.sii_l2t0_req[16] ^ `TOP.cpu.sii_l2t0_req[17] ^ `TOP.cpu.sii_l2t0_req[18] ^ `TOP.cpu.sii_l2t0_req[22] ^ `TOP.cpu.sii_l2t0_req[23] );

/*   0in custom
      -fire (($0in_rising_edge(sii_l2t0_req_vld)) && (sii_l2t0_req[24] == 1) && (sii_l2t0_req[25] == 0) && (sii_l2t0_req[26] == 0) && !(sii_rdd_l0_p2 == sii_l2b0_ecc[2]))
      -clock l2clk
      -message "ctag error for rdd in sii_l2:  p2 does not equal c2"
      -module cpu  -reset `TB_RST
      -name sii_l2_l0_ctag_ecc_rdd_p2
*/

wire sii_rdd_l0_p3 =  (`TOP.cpu.sii_l2t0_req[12] ^ `TOP.cpu.sii_l2t0_req[13] ^ `TOP.cpu.sii_l2t0_req[14] ^ `TOP.cpu.sii_l2t0_req[15] ^ `TOP.cpu.sii_l2t0_req[16] ^ `TOP.cpu.sii_l2t0_req[17] ^ `TOP.cpu.sii_l2t0_req[18] );

/*   0in custom
      -fire (($0in_rising_edge(sii_l2t0_req_vld)) && (sii_l2t0_req[24] == 1) && (sii_l2t0_req[25] == 0) && (sii_l2t0_req[26] == 0) && !(sii_rdd_l0_p3 == sii_l2b0_ecc[3]))
      -clock l2clk
      -message "ctag error for rdd in sii_l2:  p3 does not equal c3"
      -module cpu  -reset `TB_RST
      -name sii_l2_l0_ctag_ecc_rdd_p3
*/

wire sii_rdd_l0_p4 =  (`TOP.cpu.sii_l2t0_req[19] ^ `TOP.cpu.sii_l2t0_req[20] ^ `TOP.cpu.sii_l2t0_req[21] ^ `TOP.cpu.sii_l2t0_req[22] ^ `TOP.cpu.sii_l2t0_req[23] );

/*   0in custom
      -fire (($0in_rising_edge(sii_l2t0_req_vld)) && (sii_l2t0_req[24] == 1) && (sii_l2t0_req[25] == 0) && (sii_l2t0_req[26] == 0) && !(sii_rdd_l0_p4 == sii_l2b0_ecc[4]))
      -clock l2clk
      -message "ctag error for rdd in sii_l2:  p4 does not equal c4"
      -module cpu  -reset `TB_RST
      -name sii_l2_l0_ctag_ecc_rdd_p4
*/

wire sii_rdd_l0_p5 =  (`TOP.cpu.sii_l2t0_req[8] ^ `TOP.cpu.sii_l2t0_req[9] ^ `TOP.cpu.sii_l2t0_req[10] ^ `TOP.cpu.sii_l2t0_req[12] ^ `TOP.cpu.sii_l2t0_req[13] ^ `TOP.cpu.sii_l2t0_req[15] ^ `TOP.cpu.sii_l2t0_req[18] ^ `TOP.cpu.sii_l2t0_req[19] ^ `TOP.cpu.sii_l2t0_req[20] ^ `TOP.cpu.sii_l2t0_req[22] );

/*   0in custom
      -fire (($0in_rising_edge(sii_l2t0_req_vld)) && (sii_l2t0_req[24] == 1) && (sii_l2t0_req[25] == 0) && (sii_l2t0_req[26] == 0) && !(sii_rdd_l0_p5 == sii_l2b0_ecc[5]))
      -clock l2clk
      -message "ctag error for rdd in sii_l2:  p5 does not equal c5"
      -module cpu  -reset `TB_RST
      -name sii_l2_l0_ctag_ecc_rdd_p5
*/

wire sii_rdd_l1_p0 =  (`TOP.cpu.sii_l2t1_req[8] ^ `TOP.cpu.sii_l2t1_req[9] ^ `TOP.cpu.sii_l2t1_req[11] ^ `TOP.cpu.sii_l2t1_req[12] ^ `TOP.cpu.sii_l2t1_req[14] ^ `TOP.cpu.sii_l2t1_req[16] ^ `TOP.cpu.sii_l2t1_req[18] ^ `TOP.cpu.sii_l2t1_req[19] ^ `TOP.cpu.sii_l2t1_req[21] ^ `TOP.cpu.sii_l2t1_req[23] );

/*   0in custom
      -fire (($0in_rising_edge(sii_l2t1_req_vld)) && (sii_l2t1_req[24] == 1) && (sii_l2t1_req[25] == 0) && (sii_l2t1_req[26] == 0) && !(sii_rdd_l1_p0 == sii_l2b1_ecc[0]))
      -clock l2clk
      -message "ctag error for rdd in sii_l2:  p0 does not equal c0"
      -module cpu  -reset `TB_RST
      -name sii_l2_l1_ctag_ecc_rdd_p0
*/

wire sii_rdd_l1_p1 =  (`TOP.cpu.sii_l2t1_req[8] ^ `TOP.cpu.sii_l2t1_req[10] ^ `TOP.cpu.sii_l2t1_req[11] ^ `TOP.cpu.sii_l2t1_req[13] ^ `TOP.cpu.sii_l2t1_req[14] ^ `TOP.cpu.sii_l2t1_req[17] ^ `TOP.cpu.sii_l2t1_req[18] ^ `TOP.cpu.sii_l2t1_req[20] ^ `TOP.cpu.sii_l2t1_req[21] );

/*   0in custom
      -fire (($0in_rising_edge(sii_l2t1_req_vld)) && (sii_l2t1_req[24] == 1) && (sii_l2t1_req[25] == 0) && (sii_l2t1_req[26] == 0) && !(sii_rdd_l1_p1 == sii_l2b1_ecc[1]))
      -clock l2clk
      -message "ctag error for rdd in sii_l2:  p1 does not equal c1"
      -module cpu  -reset `TB_RST
      -name sii_l2_l1_ctag_ecc_rdd_p1
*/

wire sii_rdd_l1_p2 =  (`TOP.cpu.sii_l2t1_req[9] ^ `TOP.cpu.sii_l2t1_req[10] ^ `TOP.cpu.sii_l2t1_req[11] ^ `TOP.cpu.sii_l2t1_req[15] ^ `TOP.cpu.sii_l2t1_req[16] ^ `TOP.cpu.sii_l2t1_req[17] ^ `TOP.cpu.sii_l2t1_req[18] ^ `TOP.cpu.sii_l2t1_req[22] ^ `TOP.cpu.sii_l2t1_req[23] );

/*   0in custom
      -fire (($0in_rising_edge(sii_l2t1_req_vld)) && (sii_l2t1_req[24] == 1) && (sii_l2t1_req[25] == 0) && (sii_l2t1_req[26] == 0) && !(sii_rdd_l1_p2 == sii_l2b1_ecc[2]))
      -clock l2clk
      -message "ctag error for rdd in sii_l2:  p2 does not equal c2"
      -module cpu  -reset `TB_RST
      -name sii_l2_l1_ctag_ecc_rdd_p2
*/

wire sii_rdd_l1_p3 =  (`TOP.cpu.sii_l2t1_req[12] ^ `TOP.cpu.sii_l2t1_req[13] ^ `TOP.cpu.sii_l2t1_req[14] ^ `TOP.cpu.sii_l2t1_req[15] ^ `TOP.cpu.sii_l2t1_req[16] ^ `TOP.cpu.sii_l2t1_req[17] ^ `TOP.cpu.sii_l2t1_req[18] );

/*   0in custom
      -fire (($0in_rising_edge(sii_l2t1_req_vld)) && (sii_l2t1_req[24] == 1) && (sii_l2t1_req[25] == 0) && (sii_l2t1_req[26] == 0) && !(sii_rdd_l1_p3 == sii_l2b1_ecc[3]))
      -clock l2clk
      -message "ctag error for rdd in sii_l2:  p3 does not equal c3"
      -module cpu  -reset `TB_RST
      -name sii_l2_l1_ctag_ecc_rdd_p3
*/

wire sii_rdd_l1_p4 =  (`TOP.cpu.sii_l2t1_req[19] ^ `TOP.cpu.sii_l2t1_req[20] ^ `TOP.cpu.sii_l2t1_req[21] ^ `TOP.cpu.sii_l2t1_req[22] ^ `TOP.cpu.sii_l2t1_req[23] );

/*   0in custom
      -fire (($0in_rising_edge(sii_l2t1_req_vld)) && (sii_l2t1_req[24] == 1) && (sii_l2t1_req[25] == 0) && (sii_l2t1_req[26] == 0) && !(sii_rdd_l1_p4 == sii_l2b1_ecc[4]))
      -clock l2clk
      -message "ctag error for rdd in sii_l2:  p4 does not equal c4"
      -module cpu  -reset `TB_RST
      -name sii_l2_l1_ctag_ecc_rdd_p4
*/

wire sii_rdd_l1_p5 =  (`TOP.cpu.sii_l2t1_req[8] ^ `TOP.cpu.sii_l2t1_req[9] ^ `TOP.cpu.sii_l2t1_req[10] ^ `TOP.cpu.sii_l2t1_req[12] ^ `TOP.cpu.sii_l2t1_req[13] ^ `TOP.cpu.sii_l2t1_req[15] ^ `TOP.cpu.sii_l2t1_req[18] ^ `TOP.cpu.sii_l2t1_req[19] ^ `TOP.cpu.sii_l2t1_req[20] ^ `TOP.cpu.sii_l2t1_req[22] );

/*   0in custom
      -fire (($0in_rising_edge(sii_l2t1_req_vld)) && (sii_l2t1_req[24] == 1) && (sii_l2t1_req[25] == 0) && (sii_l2t1_req[26] == 0) && !(sii_rdd_l1_p5 == sii_l2b1_ecc[5]))
      -clock l2clk
      -message "ctag error for rdd in sii_l2:  p5 does not equal c5"
      -module cpu  -reset `TB_RST
      -name sii_l2_l1_ctag_ecc_rdd_p5
*/

wire sii_rdd_l2_p0 =  (`TOP.cpu.sii_l2t2_req[8] ^ `TOP.cpu.sii_l2t2_req[9] ^ `TOP.cpu.sii_l2t2_req[11] ^ `TOP.cpu.sii_l2t2_req[12] ^ `TOP.cpu.sii_l2t2_req[14] ^ `TOP.cpu.sii_l2t2_req[16] ^ `TOP.cpu.sii_l2t2_req[18] ^ `TOP.cpu.sii_l2t2_req[19] ^ `TOP.cpu.sii_l2t2_req[21] ^ `TOP.cpu.sii_l2t2_req[23] );

/*   0in custom
      -fire (($0in_rising_edge(sii_l2t2_req_vld)) && (sii_l2t2_req[24] == 1) && (sii_l2t2_req[25] == 0) && (sii_l2t2_req[26] == 0) && !(sii_rdd_l2_p0 == sii_l2b2_ecc[0]))
      -clock l2clk
      -message "ctag error for rdd in sii_l2:  p0 does not equal c0"
      -module cpu  -reset `TB_RST
      -name sii_l2_l2_ctag_ecc_rdd_p0
*/

wire sii_rdd_l2_p1 =  (`TOP.cpu.sii_l2t2_req[8] ^ `TOP.cpu.sii_l2t2_req[10] ^ `TOP.cpu.sii_l2t2_req[11] ^ `TOP.cpu.sii_l2t2_req[13] ^ `TOP.cpu.sii_l2t2_req[14] ^ `TOP.cpu.sii_l2t2_req[17] ^ `TOP.cpu.sii_l2t2_req[18] ^ `TOP.cpu.sii_l2t2_req[20] ^ `TOP.cpu.sii_l2t2_req[21] );

/*   0in custom
      -fire (($0in_rising_edge(sii_l2t2_req_vld)) && (sii_l2t2_req[24] == 1) && (sii_l2t2_req[25] == 0) && (sii_l2t2_req[26] == 0) && !(sii_rdd_l2_p1 == sii_l2b2_ecc[1]))
      -clock l2clk
      -message "ctag error for rdd in sii_l2:  p1 does not equal c1"
      -module cpu  -reset `TB_RST
      -name sii_l2_l2_ctag_ecc_rdd_p1
*/

wire sii_rdd_l2_p2 =  (`TOP.cpu.sii_l2t2_req[9] ^ `TOP.cpu.sii_l2t2_req[10] ^ `TOP.cpu.sii_l2t2_req[11] ^ `TOP.cpu.sii_l2t2_req[15] ^ `TOP.cpu.sii_l2t2_req[16] ^ `TOP.cpu.sii_l2t2_req[17] ^ `TOP.cpu.sii_l2t2_req[18] ^ `TOP.cpu.sii_l2t2_req[22] ^ `TOP.cpu.sii_l2t2_req[23] );

/*   0in custom
      -fire (($0in_rising_edge(sii_l2t2_req_vld)) && (sii_l2t2_req[24] == 1) && (sii_l2t2_req[25] == 0) && (sii_l2t2_req[26] == 0) && !(sii_rdd_l2_p2 == sii_l2b2_ecc[2]))
      -clock l2clk
      -message "ctag error for rdd in sii_l2:  p2 does not equal c2"
      -module cpu  -reset `TB_RST
      -name sii_l2_l2_ctag_ecc_rdd_p2
*/

wire sii_rdd_l2_p3 =  (`TOP.cpu.sii_l2t2_req[12] ^ `TOP.cpu.sii_l2t2_req[13] ^ `TOP.cpu.sii_l2t2_req[14] ^ `TOP.cpu.sii_l2t2_req[15] ^ `TOP.cpu.sii_l2t2_req[16] ^ `TOP.cpu.sii_l2t2_req[17] ^ `TOP.cpu.sii_l2t2_req[18] );

/*   0in custom
      -fire (($0in_rising_edge(sii_l2t2_req_vld)) && (sii_l2t2_req[24] == 1) && (sii_l2t2_req[25] == 0) && (sii_l2t2_req[26] == 0) && !(sii_rdd_l2_p3 == sii_l2b2_ecc[3]))
      -clock l2clk
      -message "ctag error for rdd in sii_l2:  p3 does not equal c3"
      -module cpu  -reset `TB_RST
      -name sii_l2_l2_ctag_ecc_rdd_p3
*/

wire sii_rdd_l2_p4 =  (`TOP.cpu.sii_l2t2_req[19] ^ `TOP.cpu.sii_l2t2_req[20] ^ `TOP.cpu.sii_l2t2_req[21] ^ `TOP.cpu.sii_l2t2_req[22] ^ `TOP.cpu.sii_l2t2_req[23] );

/*   0in custom
      -fire (($0in_rising_edge(sii_l2t2_req_vld)) && (sii_l2t2_req[24] == 1) && (sii_l2t2_req[25] == 0) && (sii_l2t2_req[26] == 0) && !(sii_rdd_l2_p4 == sii_l2b2_ecc[4]))
      -clock l2clk
      -message "ctag error for rdd in sii_l2:  p4 does not equal c4"
      -module cpu  -reset `TB_RST
      -name sii_l2_l2_ctag_ecc_rdd_p4
*/

wire sii_rdd_l2_p5 =  (`TOP.cpu.sii_l2t2_req[8] ^ `TOP.cpu.sii_l2t2_req[9] ^ `TOP.cpu.sii_l2t2_req[10] ^ `TOP.cpu.sii_l2t2_req[12] ^ `TOP.cpu.sii_l2t2_req[13] ^ `TOP.cpu.sii_l2t2_req[15] ^ `TOP.cpu.sii_l2t2_req[18] ^ `TOP.cpu.sii_l2t2_req[19] ^ `TOP.cpu.sii_l2t2_req[20] ^ `TOP.cpu.sii_l2t2_req[22] );

/*   0in custom
      -fire (($0in_rising_edge(sii_l2t2_req_vld)) && (sii_l2t2_req[24] == 1) && (sii_l2t2_req[25] == 0) && (sii_l2t2_req[26] == 0) && !(sii_rdd_l2_p5 == sii_l2b2_ecc[5]))
      -clock l2clk
      -message "ctag error for rdd in sii_l2:  p5 does not equal c5"
      -module cpu  -reset `TB_RST
      -name sii_l2_l2_ctag_ecc_rdd_p5
*/

wire sii_rdd_l3_p0 =  (`TOP.cpu.sii_l2t3_req[8] ^ `TOP.cpu.sii_l2t3_req[9] ^ `TOP.cpu.sii_l2t3_req[11] ^ `TOP.cpu.sii_l2t3_req[12] ^ `TOP.cpu.sii_l2t3_req[14] ^ `TOP.cpu.sii_l2t3_req[16] ^ `TOP.cpu.sii_l2t3_req[18] ^ `TOP.cpu.sii_l2t3_req[19] ^ `TOP.cpu.sii_l2t3_req[21] ^ `TOP.cpu.sii_l2t3_req[23] );

/*   0in custom
      -fire (($0in_rising_edge(sii_l2t3_req_vld)) && (sii_l2t3_req[24] == 1) && (sii_l2t3_req[25] == 0) && (sii_l2t3_req[26] == 0) && !(sii_rdd_l3_p0 == sii_l2b3_ecc[0]))
      -clock l2clk
      -message "ctag error for rdd in sii_l2:  p0 does not equal c0"
      -module cpu  -reset `TB_RST
      -name sii_l2_l3_ctag_ecc_rdd_p0
*/

wire sii_rdd_l3_p1 =  (`TOP.cpu.sii_l2t3_req[8] ^ `TOP.cpu.sii_l2t3_req[10] ^ `TOP.cpu.sii_l2t3_req[11] ^ `TOP.cpu.sii_l2t3_req[13] ^ `TOP.cpu.sii_l2t3_req[14] ^ `TOP.cpu.sii_l2t3_req[17] ^ `TOP.cpu.sii_l2t3_req[18] ^ `TOP.cpu.sii_l2t3_req[20] ^ `TOP.cpu.sii_l2t3_req[21] );

/*   0in custom
      -fire (($0in_rising_edge(sii_l2t3_req_vld)) && (sii_l2t3_req[24] == 1) && (sii_l2t3_req[25] == 0) && (sii_l2t3_req[26] == 0) && !(sii_rdd_l3_p1 == sii_l2b3_ecc[1]))
      -clock l2clk
      -message "ctag error for rdd in sii_l2:  p1 does not equal c1"
      -module cpu  -reset `TB_RST
      -name sii_l2_l3_ctag_ecc_rdd_p1
*/

wire sii_rdd_l3_p2 =  (`TOP.cpu.sii_l2t3_req[9] ^ `TOP.cpu.sii_l2t3_req[10] ^ `TOP.cpu.sii_l2t3_req[11] ^ `TOP.cpu.sii_l2t3_req[15] ^ `TOP.cpu.sii_l2t3_req[16] ^ `TOP.cpu.sii_l2t3_req[17] ^ `TOP.cpu.sii_l2t3_req[18] ^ `TOP.cpu.sii_l2t3_req[22] ^ `TOP.cpu.sii_l2t3_req[23] );

/*   0in custom
      -fire (($0in_rising_edge(sii_l2t3_req_vld)) && (sii_l2t3_req[24] == 1) && (sii_l2t3_req[25] == 0) && (sii_l2t3_req[26] == 0) && !(sii_rdd_l3_p2 == sii_l2b3_ecc[2]))
      -clock l2clk
      -message "ctag error for rdd in sii_l2:  p2 does not equal c2"
      -module cpu  -reset `TB_RST
      -name sii_l2_l3_ctag_ecc_rdd_p2
*/

wire sii_rdd_l3_p3 =  (`TOP.cpu.sii_l2t3_req[12] ^ `TOP.cpu.sii_l2t3_req[13] ^ `TOP.cpu.sii_l2t3_req[14] ^ `TOP.cpu.sii_l2t3_req[15] ^ `TOP.cpu.sii_l2t3_req[16] ^ `TOP.cpu.sii_l2t3_req[17] ^ `TOP.cpu.sii_l2t3_req[18] );

/*   0in custom
      -fire (($0in_rising_edge(sii_l2t3_req_vld)) && (sii_l2t3_req[24] == 1) && (sii_l2t3_req[25] == 0) && (sii_l2t3_req[26] == 0) && !(sii_rdd_l3_p3 == sii_l2b3_ecc[3]))
      -clock l2clk
      -message "ctag error for rdd in sii_l2:  p3 does not equal c3"
      -module cpu  -reset `TB_RST
      -name sii_l2_l3_ctag_ecc_rdd_p3
*/

wire sii_rdd_l3_p4 =  (`TOP.cpu.sii_l2t3_req[19] ^ `TOP.cpu.sii_l2t3_req[20] ^ `TOP.cpu.sii_l2t3_req[21] ^ `TOP.cpu.sii_l2t3_req[22] ^ `TOP.cpu.sii_l2t3_req[23] );

/*   0in custom
      -fire (($0in_rising_edge(sii_l2t3_req_vld)) && (sii_l2t3_req[24] == 1) && (sii_l2t3_req[25] == 0) && (sii_l2t3_req[26] == 0) && !(sii_rdd_l3_p4 == sii_l2b3_ecc[4]))
      -clock l2clk
      -message "ctag error for rdd in sii_l2:  p4 does not equal c4"
      -module cpu  -reset `TB_RST
      -name sii_l2_l3_ctag_ecc_rdd_p4
*/

wire sii_rdd_l3_p5 =  (`TOP.cpu.sii_l2t3_req[8] ^ `TOP.cpu.sii_l2t3_req[9] ^ `TOP.cpu.sii_l2t3_req[10] ^ `TOP.cpu.sii_l2t3_req[12] ^ `TOP.cpu.sii_l2t3_req[13] ^ `TOP.cpu.sii_l2t3_req[15] ^ `TOP.cpu.sii_l2t3_req[18] ^ `TOP.cpu.sii_l2t3_req[19] ^ `TOP.cpu.sii_l2t3_req[20] ^ `TOP.cpu.sii_l2t3_req[22] );

/*   0in custom
      -fire (($0in_rising_edge(sii_l2t3_req_vld)) && (sii_l2t3_req[24] == 1) && (sii_l2t3_req[25] == 0) && (sii_l2t3_req[26] == 0) && !(sii_rdd_l3_p5 == sii_l2b3_ecc[5]))
      -clock l2clk
      -message "ctag error for rdd in sii_l2:  p5 does not equal c5"
      -module cpu  -reset `TB_RST
      -name sii_l2_l3_ctag_ecc_rdd_p5
*/

wire sii_rdd_l4_p0 =  (`TOP.cpu.sii_l2t4_req[8] ^ `TOP.cpu.sii_l2t4_req[9] ^ `TOP.cpu.sii_l2t4_req[11] ^ `TOP.cpu.sii_l2t4_req[12] ^ `TOP.cpu.sii_l2t4_req[14] ^ `TOP.cpu.sii_l2t4_req[16] ^ `TOP.cpu.sii_l2t4_req[18] ^ `TOP.cpu.sii_l2t4_req[19] ^ `TOP.cpu.sii_l2t4_req[21] ^ `TOP.cpu.sii_l2t4_req[23] );

/*   0in custom
      -fire (($0in_rising_edge(sii_l2t4_req_vld)) && (sii_l2t4_req[24] == 1) && (sii_l2t4_req[25] == 0) && (sii_l2t4_req[26] == 0) && !(sii_rdd_l4_p0 == sii_l2b4_ecc[0]))
      -clock l2clk
      -message "ctag error for rdd in sii_l2:  p0 does not equal c0"
      -module cpu  -reset `TB_RST
      -name sii_l2_l4_ctag_ecc_rdd_p0
*/

wire sii_rdd_l4_p1 =  (`TOP.cpu.sii_l2t4_req[8] ^ `TOP.cpu.sii_l2t4_req[10] ^ `TOP.cpu.sii_l2t4_req[11] ^ `TOP.cpu.sii_l2t4_req[13] ^ `TOP.cpu.sii_l2t4_req[14] ^ `TOP.cpu.sii_l2t4_req[17] ^ `TOP.cpu.sii_l2t4_req[18] ^ `TOP.cpu.sii_l2t4_req[20] ^ `TOP.cpu.sii_l2t4_req[21] );

/*   0in custom
      -fire (($0in_rising_edge(sii_l2t4_req_vld)) && (sii_l2t4_req[24] == 1) && (sii_l2t4_req[25] == 0) && (sii_l2t4_req[26] == 0) && !(sii_rdd_l4_p1 == sii_l2b4_ecc[1]))
      -clock l2clk
      -message "ctag error for rdd in sii_l2:  p1 does not equal c1"
      -module cpu  -reset `TB_RST
      -name sii_l2_l4_ctag_ecc_rdd_p1
*/

wire sii_rdd_l4_p2 =  (`TOP.cpu.sii_l2t4_req[9] ^ `TOP.cpu.sii_l2t4_req[10] ^ `TOP.cpu.sii_l2t4_req[11] ^ `TOP.cpu.sii_l2t4_req[15] ^ `TOP.cpu.sii_l2t4_req[16] ^ `TOP.cpu.sii_l2t4_req[17] ^ `TOP.cpu.sii_l2t4_req[18] ^ `TOP.cpu.sii_l2t4_req[22] ^ `TOP.cpu.sii_l2t4_req[23] );

/*   0in custom
      -fire (($0in_rising_edge(sii_l2t4_req_vld)) && (sii_l2t4_req[24] == 1) && (sii_l2t4_req[25] == 0) && (sii_l2t4_req[26] == 0) && !(sii_rdd_l4_p2 == sii_l2b4_ecc[2]))
      -clock l2clk
      -message "ctag error for rdd in sii_l2:  p2 does not equal c2"
      -module cpu  -reset `TB_RST
      -name sii_l2_l4_ctag_ecc_rdd_p2
*/

wire sii_rdd_l4_p3 =  (`TOP.cpu.sii_l2t4_req[12] ^ `TOP.cpu.sii_l2t4_req[13] ^ `TOP.cpu.sii_l2t4_req[14] ^ `TOP.cpu.sii_l2t4_req[15] ^ `TOP.cpu.sii_l2t4_req[16] ^ `TOP.cpu.sii_l2t4_req[17] ^ `TOP.cpu.sii_l2t4_req[18] );

/*   0in custom
      -fire (($0in_rising_edge(sii_l2t4_req_vld)) && (sii_l2t4_req[24] == 1) && (sii_l2t4_req[25] == 0) && (sii_l2t4_req[26] == 0) && !(sii_rdd_l4_p3 == sii_l2b4_ecc[3]))
      -clock l2clk
      -message "ctag error for rdd in sii_l2:  p3 does not equal c3"
      -module cpu  -reset `TB_RST
      -name sii_l2_l4_ctag_ecc_rdd_p3
*/

wire sii_rdd_l4_p4 =  (`TOP.cpu.sii_l2t4_req[19] ^ `TOP.cpu.sii_l2t4_req[20] ^ `TOP.cpu.sii_l2t4_req[21] ^ `TOP.cpu.sii_l2t4_req[22] ^ `TOP.cpu.sii_l2t4_req[23] );

/*   0in custom
      -fire (($0in_rising_edge(sii_l2t4_req_vld)) && (sii_l2t4_req[24] == 1) && (sii_l2t4_req[25] == 0) && (sii_l2t4_req[26] == 0) && !(sii_rdd_l4_p4 == sii_l2b4_ecc[4]))
      -clock l2clk
      -message "ctag error for rdd in sii_l2:  p4 does not equal c4"
      -module cpu  -reset `TB_RST
      -name sii_l2_l4_ctag_ecc_rdd_p4
*/

wire sii_rdd_l4_p5 =  (`TOP.cpu.sii_l2t4_req[8] ^ `TOP.cpu.sii_l2t4_req[9] ^ `TOP.cpu.sii_l2t4_req[10] ^ `TOP.cpu.sii_l2t4_req[12] ^ `TOP.cpu.sii_l2t4_req[13] ^ `TOP.cpu.sii_l2t4_req[15] ^ `TOP.cpu.sii_l2t4_req[18] ^ `TOP.cpu.sii_l2t4_req[19] ^ `TOP.cpu.sii_l2t4_req[20] ^ `TOP.cpu.sii_l2t4_req[22] );

/*   0in custom
      -fire (($0in_rising_edge(sii_l2t4_req_vld)) && (sii_l2t4_req[24] == 1) && (sii_l2t4_req[25] == 0) && (sii_l2t4_req[26] == 0) && !(sii_rdd_l4_p5 == sii_l2b4_ecc[5]))
      -clock l2clk
      -message "ctag error for rdd in sii_l2:  p5 does not equal c5"
      -module cpu  -reset `TB_RST
      -name sii_l2_l4_ctag_ecc_rdd_p5
*/

wire sii_rdd_l5_p0 =  (`TOP.cpu.sii_l2t5_req[8] ^ `TOP.cpu.sii_l2t5_req[9] ^ `TOP.cpu.sii_l2t5_req[11] ^ `TOP.cpu.sii_l2t5_req[12] ^ `TOP.cpu.sii_l2t5_req[14] ^ `TOP.cpu.sii_l2t5_req[16] ^ `TOP.cpu.sii_l2t5_req[18] ^ `TOP.cpu.sii_l2t5_req[19] ^ `TOP.cpu.sii_l2t5_req[21] ^ `TOP.cpu.sii_l2t5_req[23] );

/*   0in custom
      -fire (($0in_rising_edge(sii_l2t5_req_vld)) && (sii_l2t5_req[24] == 1) && (sii_l2t5_req[25] == 0) && (sii_l2t5_req[26] == 0) && !(sii_rdd_l5_p0 == sii_l2b5_ecc[0]))
      -clock l2clk
      -message "ctag error for rdd in sii_l2:  p0 does not equal c0"
      -module cpu  -reset `TB_RST
      -name sii_l2_l5_ctag_ecc_rdd_p0
*/

wire sii_rdd_l5_p1 =  (`TOP.cpu.sii_l2t5_req[8] ^ `TOP.cpu.sii_l2t5_req[10] ^ `TOP.cpu.sii_l2t5_req[11] ^ `TOP.cpu.sii_l2t5_req[13] ^ `TOP.cpu.sii_l2t5_req[14] ^ `TOP.cpu.sii_l2t5_req[17] ^ `TOP.cpu.sii_l2t5_req[18] ^ `TOP.cpu.sii_l2t5_req[20] ^ `TOP.cpu.sii_l2t5_req[21] );

/*   0in custom
      -fire (($0in_rising_edge(sii_l2t5_req_vld)) && (sii_l2t5_req[24] == 1) && (sii_l2t5_req[25] == 0) && (sii_l2t5_req[26] == 0) && !(sii_rdd_l5_p1 == sii_l2b5_ecc[1]))
      -clock l2clk
      -message "ctag error for rdd in sii_l2:  p1 does not equal c1"
      -module cpu  -reset `TB_RST
      -name sii_l2_l5_ctag_ecc_rdd_p1
*/

wire sii_rdd_l5_p2 =  (`TOP.cpu.sii_l2t5_req[9] ^ `TOP.cpu.sii_l2t5_req[10] ^ `TOP.cpu.sii_l2t5_req[11] ^ `TOP.cpu.sii_l2t5_req[15] ^ `TOP.cpu.sii_l2t5_req[16] ^ `TOP.cpu.sii_l2t5_req[17] ^ `TOP.cpu.sii_l2t5_req[18] ^ `TOP.cpu.sii_l2t5_req[22] ^ `TOP.cpu.sii_l2t5_req[23] );

/*   0in custom
      -fire (($0in_rising_edge(sii_l2t5_req_vld)) && (sii_l2t5_req[24] == 1) && (sii_l2t5_req[25] == 0) && (sii_l2t5_req[26] == 0) && !(sii_rdd_l5_p2 == sii_l2b5_ecc[2]))
      -clock l2clk
      -message "ctag error for rdd in sii_l2:  p2 does not equal c2"
      -module cpu  -reset `TB_RST
      -name sii_l2_l5_ctag_ecc_rdd_p2
*/

wire sii_rdd_l5_p3 =  (`TOP.cpu.sii_l2t5_req[12] ^ `TOP.cpu.sii_l2t5_req[13] ^ `TOP.cpu.sii_l2t5_req[14] ^ `TOP.cpu.sii_l2t5_req[15] ^ `TOP.cpu.sii_l2t5_req[16] ^ `TOP.cpu.sii_l2t5_req[17] ^ `TOP.cpu.sii_l2t5_req[18] );

/*   0in custom
      -fire (($0in_rising_edge(sii_l2t5_req_vld)) && (sii_l2t5_req[24] == 1) && (sii_l2t5_req[25] == 0) && (sii_l2t5_req[26] == 0) && !(sii_rdd_l5_p3 == sii_l2b5_ecc[3]))
      -clock l2clk
      -message "ctag error for rdd in sii_l2:  p3 does not equal c3"
      -module cpu  -reset `TB_RST
      -name sii_l2_l5_ctag_ecc_rdd_p3
*/

wire sii_rdd_l5_p4 =  (`TOP.cpu.sii_l2t5_req[19] ^ `TOP.cpu.sii_l2t5_req[20] ^ `TOP.cpu.sii_l2t5_req[21] ^ `TOP.cpu.sii_l2t5_req[22] ^ `TOP.cpu.sii_l2t5_req[23] );

/*   0in custom
      -fire (($0in_rising_edge(sii_l2t5_req_vld)) && (sii_l2t5_req[24] == 1) && (sii_l2t5_req[25] == 0) && (sii_l2t5_req[26] == 0) && !(sii_rdd_l5_p4 == sii_l2b5_ecc[4]))
      -clock l2clk
      -message "ctag error for rdd in sii_l2:  p4 does not equal c4"
      -module cpu  -reset `TB_RST
      -name sii_l2_l5_ctag_ecc_rdd_p4
*/

wire sii_rdd_l5_p5 =  (`TOP.cpu.sii_l2t5_req[8] ^ `TOP.cpu.sii_l2t5_req[9] ^ `TOP.cpu.sii_l2t5_req[10] ^ `TOP.cpu.sii_l2t5_req[12] ^ `TOP.cpu.sii_l2t5_req[13] ^ `TOP.cpu.sii_l2t5_req[15] ^ `TOP.cpu.sii_l2t5_req[18] ^ `TOP.cpu.sii_l2t5_req[19] ^ `TOP.cpu.sii_l2t5_req[20] ^ `TOP.cpu.sii_l2t5_req[22] );

/*   0in custom
      -fire (($0in_rising_edge(sii_l2t5_req_vld)) && (sii_l2t5_req[24] == 1) && (sii_l2t5_req[25] == 0) && (sii_l2t5_req[26] == 0) && !(sii_rdd_l5_p5 == sii_l2b5_ecc[5]))
      -clock l2clk
      -message "ctag error for rdd in sii_l2:  p5 does not equal c5"
      -module cpu  -reset `TB_RST
      -name sii_l2_l5_ctag_ecc_rdd_p5
*/

wire sii_rdd_l6_p0 =  (`TOP.cpu.sii_l2t6_req[8] ^ `TOP.cpu.sii_l2t6_req[9] ^ `TOP.cpu.sii_l2t6_req[11] ^ `TOP.cpu.sii_l2t6_req[12] ^ `TOP.cpu.sii_l2t6_req[14] ^ `TOP.cpu.sii_l2t6_req[16] ^ `TOP.cpu.sii_l2t6_req[18] ^ `TOP.cpu.sii_l2t6_req[19] ^ `TOP.cpu.sii_l2t6_req[21] ^ `TOP.cpu.sii_l2t6_req[23] );

/*   0in custom
      -fire (($0in_rising_edge(sii_l2t6_req_vld)) && (sii_l2t6_req[24] == 1) && (sii_l2t6_req[25] == 0) && (sii_l2t6_req[26] == 0) && !(sii_rdd_l6_p0 == sii_l2b6_ecc[0]))
      -clock l2clk
      -message "ctag error for rdd in sii_l2:  p0 does not equal c0"
      -module cpu  -reset `TB_RST
      -name sii_l2_l6_ctag_ecc_rdd_p0
*/

wire sii_rdd_l6_p1 =  (`TOP.cpu.sii_l2t6_req[8] ^ `TOP.cpu.sii_l2t6_req[10] ^ `TOP.cpu.sii_l2t6_req[11] ^ `TOP.cpu.sii_l2t6_req[13] ^ `TOP.cpu.sii_l2t6_req[14] ^ `TOP.cpu.sii_l2t6_req[17] ^ `TOP.cpu.sii_l2t6_req[18] ^ `TOP.cpu.sii_l2t6_req[20] ^ `TOP.cpu.sii_l2t6_req[21] );

/*   0in custom
      -fire (($0in_rising_edge(sii_l2t6_req_vld)) && (sii_l2t6_req[24] == 1) && (sii_l2t6_req[25] == 0) && (sii_l2t6_req[26] == 0) && !(sii_rdd_l6_p1 == sii_l2b6_ecc[1]))
      -clock l2clk
      -message "ctag error for rdd in sii_l2:  p1 does not equal c1"
      -module cpu  -reset `TB_RST
      -name sii_l2_l6_ctag_ecc_rdd_p1
*/

wire sii_rdd_l6_p2 =  (`TOP.cpu.sii_l2t6_req[9] ^ `TOP.cpu.sii_l2t6_req[10] ^ `TOP.cpu.sii_l2t6_req[11] ^ `TOP.cpu.sii_l2t6_req[15] ^ `TOP.cpu.sii_l2t6_req[16] ^ `TOP.cpu.sii_l2t6_req[17] ^ `TOP.cpu.sii_l2t6_req[18] ^ `TOP.cpu.sii_l2t6_req[22] ^ `TOP.cpu.sii_l2t6_req[23] );

/*   0in custom
      -fire (($0in_rising_edge(sii_l2t6_req_vld)) && (sii_l2t6_req[24] == 1) && (sii_l2t6_req[25] == 0) && (sii_l2t6_req[26] == 0) && !(sii_rdd_l6_p2 == sii_l2b6_ecc[2]))
      -clock l2clk
      -message "ctag error for rdd in sii_l2:  p2 does not equal c2"
      -module cpu  -reset `TB_RST
      -name sii_l2_l6_ctag_ecc_rdd_p2
*/

wire sii_rdd_l6_p3 =  (`TOP.cpu.sii_l2t6_req[12] ^ `TOP.cpu.sii_l2t6_req[13] ^ `TOP.cpu.sii_l2t6_req[14] ^ `TOP.cpu.sii_l2t6_req[15] ^ `TOP.cpu.sii_l2t6_req[16] ^ `TOP.cpu.sii_l2t6_req[17] ^ `TOP.cpu.sii_l2t6_req[18] );

/*   0in custom
      -fire (($0in_rising_edge(sii_l2t6_req_vld)) && (sii_l2t6_req[24] == 1) && (sii_l2t6_req[25] == 0) && (sii_l2t6_req[26] == 0) && !(sii_rdd_l6_p3 == sii_l2b6_ecc[3]))
      -clock l2clk
      -message "ctag error for rdd in sii_l2:  p3 does not equal c3"
      -module cpu  -reset `TB_RST
      -name sii_l2_l6_ctag_ecc_rdd_p3
*/

wire sii_rdd_l6_p4 =  (`TOP.cpu.sii_l2t6_req[19] ^ `TOP.cpu.sii_l2t6_req[20] ^ `TOP.cpu.sii_l2t6_req[21] ^ `TOP.cpu.sii_l2t6_req[22] ^ `TOP.cpu.sii_l2t6_req[23] );

/*   0in custom
      -fire (($0in_rising_edge(sii_l2t6_req_vld)) && (sii_l2t6_req[24] == 1) && (sii_l2t6_req[25] == 0) && (sii_l2t6_req[26] == 0) && !(sii_rdd_l6_p4 == sii_l2b6_ecc[4]))
      -clock l2clk
      -message "ctag error for rdd in sii_l2:  p4 does not equal c4"
      -module cpu  -reset `TB_RST
      -name sii_l2_l6_ctag_ecc_rdd_p4
*/

wire sii_rdd_l6_p5 =  (`TOP.cpu.sii_l2t6_req[8] ^ `TOP.cpu.sii_l2t6_req[9] ^ `TOP.cpu.sii_l2t6_req[10] ^ `TOP.cpu.sii_l2t6_req[12] ^ `TOP.cpu.sii_l2t6_req[13] ^ `TOP.cpu.sii_l2t6_req[15] ^ `TOP.cpu.sii_l2t6_req[18] ^ `TOP.cpu.sii_l2t6_req[19] ^ `TOP.cpu.sii_l2t6_req[20] ^ `TOP.cpu.sii_l2t6_req[22] );

/*   0in custom
      -fire (($0in_rising_edge(sii_l2t6_req_vld)) && (sii_l2t6_req[24] == 1) && (sii_l2t6_req[25] == 0) && (sii_l2t6_req[26] == 0) && !(sii_rdd_l6_p5 == sii_l2b6_ecc[5]))
      -clock l2clk
      -message "ctag error for rdd in sii_l2:  p5 does not equal c5"
      -module cpu  -reset `TB_RST
      -name sii_l2_l6_ctag_ecc_rdd_p5
*/

wire sii_rdd_l7_p0 =  (`TOP.cpu.sii_l2t7_req[8] ^ `TOP.cpu.sii_l2t7_req[9] ^ `TOP.cpu.sii_l2t7_req[11] ^ `TOP.cpu.sii_l2t7_req[12] ^ `TOP.cpu.sii_l2t7_req[14] ^ `TOP.cpu.sii_l2t7_req[16] ^ `TOP.cpu.sii_l2t7_req[18] ^ `TOP.cpu.sii_l2t7_req[19] ^ `TOP.cpu.sii_l2t7_req[21] ^ `TOP.cpu.sii_l2t7_req[23] );

/*   0in custom
      -fire (($0in_rising_edge(sii_l2t7_req_vld)) && (sii_l2t7_req[24] == 1) && (sii_l2t7_req[25] == 0) && (sii_l2t7_req[26] == 0) && !(sii_rdd_l7_p0 == sii_l2b7_ecc[0]))
      -clock l2clk
      -message "ctag error for rdd in sii_l2:  p0 does not equal c0"
      -module cpu  -reset `TB_RST
      -name sii_l2_l7_ctag_ecc_rdd_p0
*/

wire sii_rdd_l7_p1 =  (`TOP.cpu.sii_l2t7_req[8] ^ `TOP.cpu.sii_l2t7_req[10] ^ `TOP.cpu.sii_l2t7_req[11] ^ `TOP.cpu.sii_l2t7_req[13] ^ `TOP.cpu.sii_l2t7_req[14] ^ `TOP.cpu.sii_l2t7_req[17] ^ `TOP.cpu.sii_l2t7_req[18] ^ `TOP.cpu.sii_l2t7_req[20] ^ `TOP.cpu.sii_l2t7_req[21] );

/*   0in custom
      -fire (($0in_rising_edge(sii_l2t7_req_vld)) && (sii_l2t7_req[24] == 1) && (sii_l2t7_req[25] == 0) && (sii_l2t7_req[26] == 0) && !(sii_rdd_l7_p1 == sii_l2b7_ecc[1]))
      -clock l2clk
      -message "ctag error for rdd in sii_l2:  p1 does not equal c1"
      -module cpu  -reset `TB_RST
      -name sii_l2_l7_ctag_ecc_rdd_p1
*/

wire sii_rdd_l7_p2 =  (`TOP.cpu.sii_l2t7_req[9] ^ `TOP.cpu.sii_l2t7_req[10] ^ `TOP.cpu.sii_l2t7_req[11] ^ `TOP.cpu.sii_l2t7_req[15] ^ `TOP.cpu.sii_l2t7_req[16] ^ `TOP.cpu.sii_l2t7_req[17] ^ `TOP.cpu.sii_l2t7_req[18] ^ `TOP.cpu.sii_l2t7_req[22] ^ `TOP.cpu.sii_l2t7_req[23] );

/*   0in custom
      -fire (($0in_rising_edge(sii_l2t7_req_vld)) && (sii_l2t7_req[24] == 1) && (sii_l2t7_req[25] == 0) && (sii_l2t7_req[26] == 0) && !(sii_rdd_l7_p2 == sii_l2b7_ecc[2]))
      -clock l2clk
      -message "ctag error for rdd in sii_l2:  p2 does not equal c2"
      -module cpu  -reset `TB_RST
      -name sii_l2_l7_ctag_ecc_rdd_p2
*/

wire sii_rdd_l7_p3 =  (`TOP.cpu.sii_l2t7_req[12] ^ `TOP.cpu.sii_l2t7_req[13] ^ `TOP.cpu.sii_l2t7_req[14] ^ `TOP.cpu.sii_l2t7_req[15] ^ `TOP.cpu.sii_l2t7_req[16] ^ `TOP.cpu.sii_l2t7_req[17] ^ `TOP.cpu.sii_l2t7_req[18] );

/*   0in custom
      -fire (($0in_rising_edge(sii_l2t7_req_vld)) && (sii_l2t7_req[24] == 1) && (sii_l2t7_req[25] == 0) && (sii_l2t7_req[26] == 0) && !(sii_rdd_l7_p3 == sii_l2b7_ecc[3]))
      -clock l2clk
      -message "ctag error for rdd in sii_l2:  p3 does not equal c3"
      -module cpu  -reset `TB_RST
      -name sii_l2_l7_ctag_ecc_rdd_p3
*/

wire sii_rdd_l7_p4 =  (`TOP.cpu.sii_l2t7_req[19] ^ `TOP.cpu.sii_l2t7_req[20] ^ `TOP.cpu.sii_l2t7_req[21] ^ `TOP.cpu.sii_l2t7_req[22] ^ `TOP.cpu.sii_l2t7_req[23] );

/*   0in custom
      -fire (($0in_rising_edge(sii_l2t7_req_vld)) && (sii_l2t7_req[24] == 1) && (sii_l2t7_req[25] == 0) && (sii_l2t7_req[26] == 0) && !(sii_rdd_l7_p4 == sii_l2b7_ecc[4]))
      -clock l2clk
      -message "ctag error for rdd in sii_l2:  p4 does not equal c4"
      -module cpu  -reset `TB_RST
      -name sii_l2_l7_ctag_ecc_rdd_p4
*/

wire sii_rdd_l7_p5 =  (`TOP.cpu.sii_l2t7_req[8] ^ `TOP.cpu.sii_l2t7_req[9] ^ `TOP.cpu.sii_l2t7_req[10] ^ `TOP.cpu.sii_l2t7_req[12] ^ `TOP.cpu.sii_l2t7_req[13] ^ `TOP.cpu.sii_l2t7_req[15] ^ `TOP.cpu.sii_l2t7_req[18] ^ `TOP.cpu.sii_l2t7_req[19] ^ `TOP.cpu.sii_l2t7_req[20] ^ `TOP.cpu.sii_l2t7_req[22] );

/*   0in custom
      -fire (($0in_rising_edge(sii_l2t7_req_vld)) && (sii_l2t7_req[24] == 1) && (sii_l2t7_req[25] == 0) && (sii_l2t7_req[26] == 0) && !(sii_rdd_l7_p5 == sii_l2b7_ecc[5]))
      -clock l2clk
      -message "ctag error for rdd in sii_l2:  p5 does not equal c5"
      -module cpu  -reset `TB_RST
      -name sii_l2_l7_ctag_ecc_rdd_p5
*/

wire sii_wri_l0_p0 =  (`TOP.cpu.sii_l2t0_req[8] ^ `TOP.cpu.sii_l2t0_req[9] ^ `TOP.cpu.sii_l2t0_req[11] ^ `TOP.cpu.sii_l2t0_req[12] ^ `TOP.cpu.sii_l2t0_req[14] ^ `TOP.cpu.sii_l2t0_req[16] ^ `TOP.cpu.sii_l2t0_req[18] ^ `TOP.cpu.sii_l2t0_req[19] ^ `TOP.cpu.sii_l2t0_req[21] ^ `TOP.cpu.sii_l2t0_req[23] );

/*   0in custom
      -fire (($0in_rising_edge(sii_l2t0_req_vld)) && (sii_l2t0_req[24] == 0) && (sii_l2t0_req[25] == 0) && (sii_l2t0_req[26] == 1) && !(sii_wri_l0_p0 == sii_l2b0_ecc[0]))
      -clock l2clk
      -message "ctag error for wri in sii_l2:  p0 does not equal c0"
      -module cpu  -reset `TB_RST
      -name sii_l2_l0_ctag_ecc_wri_p0
*/


wire sii_wri_l0_p1 =  (`TOP.cpu.sii_l2t0_req[8] ^ `TOP.cpu.sii_l2t0_req[10] ^ `TOP.cpu.sii_l2t0_req[11] ^ `TOP.cpu.sii_l2t0_req[13] ^ `TOP.cpu.sii_l2t0_req[14] ^ `TOP.cpu.sii_l2t0_req[17] ^ `TOP.cpu.sii_l2t0_req[18] ^ `TOP.cpu.sii_l2t0_req[20] ^ `TOP.cpu.sii_l2t0_req[21] );

/*   0in custom
      -fire (($0in_rising_edge(sii_l2t0_req_vld)) && (sii_l2t0_req[24] == 0) && (sii_l2t0_req[25] == 0) && (sii_l2t0_req[26] == 1) && !(sii_wri_l0_p1 == sii_l2b0_ecc[1]))
      -clock l2clk
      -message "ctag error for wri in sii_l2:  p1 does not equal c1"
      -module cpu  -reset `TB_RST
      -name sii_l2_l0_ctag_ecc_wri_p1
*/

wire sii_wri_l0_p2 =  (`TOP.cpu.sii_l2t0_req[9] ^ `TOP.cpu.sii_l2t0_req[10] ^ `TOP.cpu.sii_l2t0_req[11] ^ `TOP.cpu.sii_l2t0_req[15] ^ `TOP.cpu.sii_l2t0_req[16] ^ `TOP.cpu.sii_l2t0_req[17] ^ `TOP.cpu.sii_l2t0_req[18] ^ `TOP.cpu.sii_l2t0_req[22] ^ `TOP.cpu.sii_l2t0_req[23] );

/*   0in custom
      -fire (($0in_rising_edge(sii_l2t0_req_vld)) && (sii_l2t0_req[24] == 0) && (sii_l2t0_req[25] == 0) && (sii_l2t0_req[26] == 1) && !(sii_wri_l0_p2 == sii_l2b0_ecc[2]))
      -clock l2clk
      -message "ctag error for wri in sii_l2:  p2 does not equal c2"
      -module cpu  -reset `TB_RST
      -name sii_l2_l0_ctag_ecc_wri_p2
*/

wire sii_wri_l0_p3 =  (`TOP.cpu.sii_l2t0_req[12] ^ `TOP.cpu.sii_l2t0_req[13] ^ `TOP.cpu.sii_l2t0_req[14] ^ `TOP.cpu.sii_l2t0_req[15] ^ `TOP.cpu.sii_l2t0_req[16] ^ `TOP.cpu.sii_l2t0_req[17] ^ `TOP.cpu.sii_l2t0_req[18] );

/*   0in custom
      -fire (($0in_rising_edge(sii_l2t0_req_vld)) && (sii_l2t0_req[24] == 0) && (sii_l2t0_req[25] == 0) && (sii_l2t0_req[26] == 1) && !(sii_wri_l0_p3 == sii_l2b0_ecc[3]))
      -clock l2clk
      -message "ctag error for wri in sii_l2:  p3 does not equal c3"
      -module cpu  -reset `TB_RST
      -name sii_l2_l0_ctag_ecc_wri_p3
*/

wire sii_wri_l0_p4 =  (`TOP.cpu.sii_l2t0_req[19] ^ `TOP.cpu.sii_l2t0_req[20] ^ `TOP.cpu.sii_l2t0_req[21] ^ `TOP.cpu.sii_l2t0_req[22] ^ `TOP.cpu.sii_l2t0_req[23] );

/*   0in custom
      -fire (($0in_rising_edge(sii_l2t0_req_vld)) && (sii_l2t0_req[24] == 0) && (sii_l2t0_req[25] == 0) && (sii_l2t0_req[26] == 1) && !(sii_wri_l0_p4 == sii_l2b0_ecc[4]))
      -clock l2clk
      -message "ctag error for wri in sii_l2:  p4 does not equal c4"
      -module cpu  -reset `TB_RST
      -name sii_l2_l0_ctag_ecc_wri_p4
*/

wire sii_wri_l0_p5 =  (`TOP.cpu.sii_l2t0_req[8] ^ `TOP.cpu.sii_l2t0_req[9] ^ `TOP.cpu.sii_l2t0_req[10] ^ `TOP.cpu.sii_l2t0_req[12] ^ `TOP.cpu.sii_l2t0_req[13] ^ `TOP.cpu.sii_l2t0_req[15] ^ `TOP.cpu.sii_l2t0_req[18] ^ `TOP.cpu.sii_l2t0_req[19] ^ `TOP.cpu.sii_l2t0_req[20] ^ `TOP.cpu.sii_l2t0_req[22] );

/*   0in custom
      -fire (($0in_rising_edge(sii_l2t0_req_vld)) && (sii_l2t0_req[24] == 0) && (sii_l2t0_req[25] == 0) && (sii_l2t0_req[26] == 1) && !(sii_wri_l0_p5 == sii_l2b0_ecc[5]))
      -clock l2clk
      -message "ctag error for wri in sii_l2:  p5 does not equal c5"
      -module cpu  -reset `TB_RST
      -name sii_l2_l0_ctag_ecc_wri_p5
*/

wire sii_wri_l1_p0 =  (`TOP.cpu.sii_l2t1_req[8] ^ `TOP.cpu.sii_l2t1_req[9] ^ `TOP.cpu.sii_l2t1_req[11] ^ `TOP.cpu.sii_l2t1_req[12] ^ `TOP.cpu.sii_l2t1_req[14] ^ `TOP.cpu.sii_l2t1_req[16] ^ `TOP.cpu.sii_l2t1_req[18] ^ `TOP.cpu.sii_l2t1_req[19] ^ `TOP.cpu.sii_l2t1_req[21] ^ `TOP.cpu.sii_l2t1_req[23] );

/*   0in custom
      -fire (($0in_rising_edge(sii_l2t1_req_vld)) && (sii_l2t1_req[24] == 0) && (sii_l2t1_req[25] == 0) && (sii_l2t1_req[26] == 1) && !(sii_wri_l1_p0 == sii_l2b1_ecc[0]))
      -clock l2clk
      -message "ctag error for wri in sii_l2:  p0 does not equal c0"
      -module cpu  -reset `TB_RST
      -name sii_l2_l1_ctag_ecc_wri_p0
*/

wire sii_wri_l1_p1 =  (`TOP.cpu.sii_l2t1_req[8] ^ `TOP.cpu.sii_l2t1_req[10] ^ `TOP.cpu.sii_l2t1_req[11] ^ `TOP.cpu.sii_l2t1_req[13] ^ `TOP.cpu.sii_l2t1_req[14] ^ `TOP.cpu.sii_l2t1_req[17] ^ `TOP.cpu.sii_l2t1_req[18] ^ `TOP.cpu.sii_l2t1_req[20] ^ `TOP.cpu.sii_l2t1_req[21] );

/*   0in custom
      -fire (($0in_rising_edge(sii_l2t1_req_vld)) && (sii_l2t1_req[24] == 0) && (sii_l2t1_req[25] == 0) && (sii_l2t1_req[26] == 1) && !(sii_wri_l1_p1 == sii_l2b1_ecc[1]))
      -clock l2clk
      -message "ctag error for wri in sii_l2:  p1 does not equal c1"
      -module cpu  -reset `TB_RST
      -name sii_l2_l1_ctag_ecc_wri_p1
*/

wire sii_wri_l1_p2 =  (`TOP.cpu.sii_l2t1_req[9] ^ `TOP.cpu.sii_l2t1_req[10] ^ `TOP.cpu.sii_l2t1_req[11] ^ `TOP.cpu.sii_l2t1_req[15] ^ `TOP.cpu.sii_l2t1_req[16] ^ `TOP.cpu.sii_l2t1_req[17] ^ `TOP.cpu.sii_l2t1_req[18] ^ `TOP.cpu.sii_l2t1_req[22] ^ `TOP.cpu.sii_l2t1_req[23] );

/*   0in custom
      -fire (($0in_rising_edge(sii_l2t1_req_vld)) && (sii_l2t1_req[24] == 0) && (sii_l2t1_req[25] == 0) && (sii_l2t1_req[26] == 1) && !(sii_wri_l1_p2 == sii_l2b1_ecc[2]))
      -clock l2clk
      -message "ctag error for wri in sii_l2:  p2 does not equal c2"
      -module cpu  -reset `TB_RST
      -name sii_l2_l1_ctag_ecc_wri_p2
*/

wire sii_wri_l1_p3 =  (`TOP.cpu.sii_l2t1_req[12] ^ `TOP.cpu.sii_l2t1_req[13] ^ `TOP.cpu.sii_l2t1_req[14] ^ `TOP.cpu.sii_l2t1_req[15] ^ `TOP.cpu.sii_l2t1_req[16] ^ `TOP.cpu.sii_l2t1_req[17] ^ `TOP.cpu.sii_l2t1_req[18] );

/*   0in custom
      -fire (($0in_rising_edge(sii_l2t1_req_vld)) && (sii_l2t1_req[24] == 0) && (sii_l2t1_req[25] == 0) && (sii_l2t1_req[26] == 1) && !(sii_wri_l1_p3 == sii_l2b1_ecc[3]))
      -clock l2clk
      -message "ctag error for wri in sii_l2:  p3 does not equal c3"
      -module cpu  -reset `TB_RST
      -name sii_l2_l1_ctag_ecc_wri_p3
*/

wire sii_wri_l1_p4 =  (`TOP.cpu.sii_l2t1_req[19] ^ `TOP.cpu.sii_l2t1_req[20] ^ `TOP.cpu.sii_l2t1_req[21] ^ `TOP.cpu.sii_l2t1_req[22] ^ `TOP.cpu.sii_l2t1_req[23] );

/*   0in custom
      -fire (($0in_rising_edge(sii_l2t1_req_vld)) && (sii_l2t1_req[24] == 0) && (sii_l2t1_req[25] == 0) && (sii_l2t1_req[26] == 1) && !(sii_wri_l1_p4 == sii_l2b1_ecc[4]))
      -clock l2clk
      -message "ctag error for wri in sii_l2:  p4 does not equal c4"
      -module cpu  -reset `TB_RST
      -name sii_l2_l1_ctag_ecc_wri_p4
*/

wire sii_wri_l1_p5 =  (`TOP.cpu.sii_l2t1_req[8] ^ `TOP.cpu.sii_l2t1_req[9] ^ `TOP.cpu.sii_l2t1_req[10] ^ `TOP.cpu.sii_l2t1_req[12] ^ `TOP.cpu.sii_l2t1_req[13] ^ `TOP.cpu.sii_l2t1_req[15] ^ `TOP.cpu.sii_l2t1_req[18] ^ `TOP.cpu.sii_l2t1_req[19] ^ `TOP.cpu.sii_l2t1_req[20] ^ `TOP.cpu.sii_l2t1_req[22] );

/*   0in custom
      -fire (($0in_rising_edge(sii_l2t1_req_vld)) && (sii_l2t1_req[24] == 0) && (sii_l2t1_req[25] == 0) && (sii_l2t1_req[26] == 1) && !(sii_wri_l1_p5 == sii_l2b1_ecc[5]))
      -clock l2clk
      -message "ctag error for wri in sii_l2:  p5 does not equal c5"
      -module cpu  -reset `TB_RST
      -name sii_l2_l1_ctag_ecc_wri_p5
*/

wire sii_wri_l2_p0 =  (`TOP.cpu.sii_l2t2_req[8] ^ `TOP.cpu.sii_l2t2_req[9] ^ `TOP.cpu.sii_l2t2_req[11] ^ `TOP.cpu.sii_l2t2_req[12] ^ `TOP.cpu.sii_l2t2_req[14] ^ `TOP.cpu.sii_l2t2_req[16] ^ `TOP.cpu.sii_l2t2_req[18] ^ `TOP.cpu.sii_l2t2_req[19] ^ `TOP.cpu.sii_l2t2_req[21] ^ `TOP.cpu.sii_l2t2_req[23] );

/*   0in custom
      -fire (($0in_rising_edge(sii_l2t2_req_vld)) && (sii_l2t2_req[24] == 0) && (sii_l2t2_req[25] == 0) && (sii_l2t2_req[26] == 1) && !(sii_wri_l2_p0 == sii_l2b2_ecc[0]))
      -clock l2clk
      -message "ctag error for wri in sii_l2:  p0 does not equal c0"
      -module cpu  -reset `TB_RST
      -name sii_l2_l2_ctag_ecc_wri_p0
*/

wire sii_wri_l2_p1 =  (`TOP.cpu.sii_l2t2_req[8] ^ `TOP.cpu.sii_l2t2_req[10] ^ `TOP.cpu.sii_l2t2_req[11] ^ `TOP.cpu.sii_l2t2_req[13] ^ `TOP.cpu.sii_l2t2_req[14] ^ `TOP.cpu.sii_l2t2_req[17] ^ `TOP.cpu.sii_l2t2_req[18] ^ `TOP.cpu.sii_l2t2_req[20] ^ `TOP.cpu.sii_l2t2_req[21] );

/*   0in custom
      -fire (($0in_rising_edge(sii_l2t2_req_vld)) && (sii_l2t2_req[24] == 0) && (sii_l2t2_req[25] == 0) && (sii_l2t2_req[26] == 1) && !(sii_wri_l2_p1 == sii_l2b2_ecc[1]))
      -clock l2clk
      -message "ctag error for wri in sii_l2:  p1 does not equal c1"
      -module cpu  -reset `TB_RST
      -name sii_l2_l2_ctag_ecc_wri_p1
*/

wire sii_wri_l2_p2 =  (`TOP.cpu.sii_l2t2_req[9] ^ `TOP.cpu.sii_l2t2_req[10] ^ `TOP.cpu.sii_l2t2_req[11] ^ `TOP.cpu.sii_l2t2_req[15] ^ `TOP.cpu.sii_l2t2_req[16] ^ `TOP.cpu.sii_l2t2_req[17] ^ `TOP.cpu.sii_l2t2_req[18] ^ `TOP.cpu.sii_l2t2_req[22] ^ `TOP.cpu.sii_l2t2_req[23] );

/*   0in custom
      -fire (($0in_rising_edge(sii_l2t2_req_vld)) && (sii_l2t2_req[24] == 0) && (sii_l2t2_req[25] == 0) && (sii_l2t2_req[26] == 1) && !(sii_wri_l2_p2 == sii_l2b2_ecc[2]))
      -clock l2clk
      -message "ctag error for wri in sii_l2:  p2 does not equal c2"
      -module cpu  -reset `TB_RST
      -name sii_l2_l2_ctag_ecc_wri_p2
*/

wire sii_wri_l2_p3 =  (`TOP.cpu.sii_l2t2_req[12] ^ `TOP.cpu.sii_l2t2_req[13] ^ `TOP.cpu.sii_l2t2_req[14] ^ `TOP.cpu.sii_l2t2_req[15] ^ `TOP.cpu.sii_l2t2_req[16] ^ `TOP.cpu.sii_l2t2_req[17] ^ `TOP.cpu.sii_l2t2_req[18] );

/*   0in custom
      -fire (($0in_rising_edge(sii_l2t2_req_vld)) && (sii_l2t2_req[24] == 0) && (sii_l2t2_req[25] == 0) && (sii_l2t2_req[26] == 1) && !(sii_wri_l2_p3 == sii_l2b2_ecc[3]))
      -clock l2clk
      -message "ctag error for wri in sii_l2:  p3 does not equal c3"
      -module cpu  -reset `TB_RST
      -name sii_l2_l2_ctag_ecc_wri_p3
*/

wire sii_wri_l2_p4 =  (`TOP.cpu.sii_l2t2_req[19] ^ `TOP.cpu.sii_l2t2_req[20] ^ `TOP.cpu.sii_l2t2_req[21] ^ `TOP.cpu.sii_l2t2_req[22] ^ `TOP.cpu.sii_l2t2_req[23] );

/*   0in custom
      -fire (($0in_rising_edge(sii_l2t2_req_vld)) && (sii_l2t2_req[24] == 0) && (sii_l2t2_req[25] == 0) && (sii_l2t2_req[26] == 1) && !(sii_wri_l2_p4 == sii_l2b2_ecc[4]))
      -clock l2clk
      -message "ctag error for wri in sii_l2:  p4 does not equal c4"
      -module cpu  -reset `TB_RST
      -name sii_l2_l2_ctag_ecc_wri_p4
*/

wire sii_wri_l2_p5 =  (`TOP.cpu.sii_l2t2_req[8] ^ `TOP.cpu.sii_l2t2_req[9] ^ `TOP.cpu.sii_l2t2_req[10] ^ `TOP.cpu.sii_l2t2_req[12] ^ `TOP.cpu.sii_l2t2_req[13] ^ `TOP.cpu.sii_l2t2_req[15] ^ `TOP.cpu.sii_l2t2_req[18] ^ `TOP.cpu.sii_l2t2_req[19] ^ `TOP.cpu.sii_l2t2_req[20] ^ `TOP.cpu.sii_l2t2_req[22] );

/*   0in custom
      -fire (($0in_rising_edge(sii_l2t2_req_vld)) && (sii_l2t2_req[24] == 0) && (sii_l2t2_req[25] == 0) && (sii_l2t2_req[26] == 1) && !(sii_wri_l2_p5 == sii_l2b2_ecc[5]))
      -clock l2clk
      -message "ctag error for wri in sii_l2:  p5 does not equal c5"
      -module cpu  -reset `TB_RST
      -name sii_l2_l2_ctag_ecc_wri_p5
*/

wire sii_wri_l3_p0 =  (`TOP.cpu.sii_l2t3_req[8] ^ `TOP.cpu.sii_l2t3_req[9] ^ `TOP.cpu.sii_l2t3_req[11] ^ `TOP.cpu.sii_l2t3_req[12] ^ `TOP.cpu.sii_l2t3_req[14] ^ `TOP.cpu.sii_l2t3_req[16] ^ `TOP.cpu.sii_l2t3_req[18] ^ `TOP.cpu.sii_l2t3_req[19] ^ `TOP.cpu.sii_l2t3_req[21] ^ `TOP.cpu.sii_l2t3_req[23] );

/*   0in custom
      -fire (($0in_rising_edge(sii_l2t3_req_vld)) && (sii_l2t3_req[24] == 0) && (sii_l2t3_req[25] == 0) && (sii_l2t3_req[26] == 1) && !(sii_wri_l3_p0 == sii_l2b3_ecc[0]))
      -clock l2clk
      -message "ctag error for wri in sii_l2:  p0 does not equal c0"
      -module cpu  -reset `TB_RST
      -name sii_l2_l3_ctag_ecc_wri_p0
*/

wire sii_wri_l3_p1 =  (`TOP.cpu.sii_l2t3_req[8] ^ `TOP.cpu.sii_l2t3_req[10] ^ `TOP.cpu.sii_l2t3_req[11] ^ `TOP.cpu.sii_l2t3_req[13] ^ `TOP.cpu.sii_l2t3_req[14] ^ `TOP.cpu.sii_l2t3_req[17] ^ `TOP.cpu.sii_l2t3_req[18] ^ `TOP.cpu.sii_l2t3_req[20] ^ `TOP.cpu.sii_l2t3_req[21] );

/*   0in custom
      -fire (($0in_rising_edge(sii_l2t3_req_vld)) && (sii_l2t3_req[24] == 0) && (sii_l2t3_req[25] == 0) && (sii_l2t3_req[26] == 1) && !(sii_wri_l3_p1 == sii_l2b3_ecc[1]))
      -clock l2clk
      -message "ctag error for wri in sii_l2:  p1 does not equal c1"
      -module cpu  -reset `TB_RST
      -name sii_l2_l3_ctag_ecc_wri_p1
*/

wire sii_wri_l3_p2 =  (`TOP.cpu.sii_l2t3_req[9] ^ `TOP.cpu.sii_l2t3_req[10] ^ `TOP.cpu.sii_l2t3_req[11] ^ `TOP.cpu.sii_l2t3_req[15] ^ `TOP.cpu.sii_l2t3_req[16] ^ `TOP.cpu.sii_l2t3_req[17] ^ `TOP.cpu.sii_l2t3_req[18] ^ `TOP.cpu.sii_l2t3_req[22] ^ `TOP.cpu.sii_l2t3_req[23] );

/*   0in custom
      -fire (($0in_rising_edge(sii_l2t3_req_vld)) && (sii_l2t3_req[24] == 0) && (sii_l2t3_req[25] == 0) && (sii_l2t3_req[26] == 1) && !(sii_wri_l3_p2 == sii_l2b3_ecc[2]))
      -clock l2clk
      -message "ctag error for wri in sii_l2:  p2 does not equal c2"
      -module cpu  -reset `TB_RST
      -name sii_l2_l3_ctag_ecc_wri_p2
*/

wire sii_wri_l3_p3 =  (`TOP.cpu.sii_l2t3_req[12] ^ `TOP.cpu.sii_l2t3_req[13] ^ `TOP.cpu.sii_l2t3_req[14] ^ `TOP.cpu.sii_l2t3_req[15] ^ `TOP.cpu.sii_l2t3_req[16] ^ `TOP.cpu.sii_l2t3_req[17] ^ `TOP.cpu.sii_l2t3_req[18] );

/*   0in custom
      -fire (($0in_rising_edge(sii_l2t3_req_vld)) && (sii_l2t3_req[24] == 0) && (sii_l2t3_req[25] == 0) && (sii_l2t3_req[26] == 1) && !(sii_wri_l3_p3 == sii_l2b3_ecc[3]))
      -clock l2clk
      -message "ctag error for wri in sii_l2:  p3 does not equal c3"
      -module cpu  -reset `TB_RST
      -name sii_l2_l3_ctag_ecc_wri_p3
*/

wire sii_wri_l3_p4 =  (`TOP.cpu.sii_l2t3_req[19] ^ `TOP.cpu.sii_l2t3_req[20] ^ `TOP.cpu.sii_l2t3_req[21] ^ `TOP.cpu.sii_l2t3_req[22] ^ `TOP.cpu.sii_l2t3_req[23] );

/*   0in custom
      -fire (($0in_rising_edge(sii_l2t3_req_vld)) && (sii_l2t3_req[24] == 0) && (sii_l2t3_req[25] == 0) && (sii_l2t3_req[26] == 1) && !(sii_wri_l3_p4 == sii_l2b3_ecc[4]))
      -clock l2clk
      -message "ctag error for wri in sii_l2:  p4 does not equal c4"
      -module cpu  -reset `TB_RST
      -name sii_l2_l3_ctag_ecc_wri_p4
*/

wire sii_wri_l3_p5 =  (`TOP.cpu.sii_l2t3_req[8] ^ `TOP.cpu.sii_l2t3_req[9] ^ `TOP.cpu.sii_l2t3_req[10] ^ `TOP.cpu.sii_l2t3_req[12] ^ `TOP.cpu.sii_l2t3_req[13] ^ `TOP.cpu.sii_l2t3_req[15] ^ `TOP.cpu.sii_l2t3_req[18] ^ `TOP.cpu.sii_l2t3_req[19] ^ `TOP.cpu.sii_l2t3_req[20] ^ `TOP.cpu.sii_l2t3_req[22] );

/*   0in custom
      -fire (($0in_rising_edge(sii_l2t3_req_vld)) && (sii_l2t3_req[24] == 0) && (sii_l2t3_req[25] == 0) && (sii_l2t3_req[26] == 1) && !(sii_wri_l3_p5 == sii_l2b3_ecc[5]))
      -clock l2clk
      -message "ctag error for wri in sii_l2:  p5 does not equal c5"
      -module cpu  -reset `TB_RST
      -name sii_l2_l3_ctag_ecc_wri_p5
*/

wire sii_wri_l4_p0 =  (`TOP.cpu.sii_l2t4_req[8] ^ `TOP.cpu.sii_l2t4_req[9] ^ `TOP.cpu.sii_l2t4_req[11] ^ `TOP.cpu.sii_l2t4_req[12] ^ `TOP.cpu.sii_l2t4_req[14] ^ `TOP.cpu.sii_l2t4_req[16] ^ `TOP.cpu.sii_l2t4_req[18] ^ `TOP.cpu.sii_l2t4_req[19] ^ `TOP.cpu.sii_l2t4_req[21] ^ `TOP.cpu.sii_l2t4_req[23] );

/*   0in custom
      -fire (($0in_rising_edge(sii_l2t4_req_vld)) && (sii_l2t4_req[24] == 0) && (sii_l2t4_req[25] == 0) && (sii_l2t4_req[26] == 1) && !(sii_wri_l4_p0 == sii_l2b4_ecc[0]))
      -clock l2clk
      -message "ctag error for wri in sii_l2:  p0 does not equal c0"
      -module cpu  -reset `TB_RST
      -name sii_l2_l4_ctag_ecc_wri_p0
*/

wire sii_wri_l4_p1 =  (`TOP.cpu.sii_l2t4_req[8] ^ `TOP.cpu.sii_l2t4_req[10] ^ `TOP.cpu.sii_l2t4_req[11] ^ `TOP.cpu.sii_l2t4_req[13] ^ `TOP.cpu.sii_l2t4_req[14] ^ `TOP.cpu.sii_l2t4_req[17] ^ `TOP.cpu.sii_l2t4_req[18] ^ `TOP.cpu.sii_l2t4_req[20] ^ `TOP.cpu.sii_l2t4_req[21] );

/*   0in custom
      -fire (($0in_rising_edge(sii_l2t4_req_vld)) && (sii_l2t4_req[24] == 0) && (sii_l2t4_req[25] == 0) && (sii_l2t4_req[26] == 1) && !(sii_wri_l4_p1 == sii_l2b4_ecc[1]))
      -clock l2clk
      -message "ctag error for wri in sii_l2:  p1 does not equal c1"
      -module cpu  -reset `TB_RST
      -name sii_l2_l4_ctag_ecc_wri_p1
*/

wire sii_wri_l4_p2 =  (`TOP.cpu.sii_l2t4_req[9] ^ `TOP.cpu.sii_l2t4_req[10] ^ `TOP.cpu.sii_l2t4_req[11] ^ `TOP.cpu.sii_l2t4_req[15] ^ `TOP.cpu.sii_l2t4_req[16] ^ `TOP.cpu.sii_l2t4_req[17] ^ `TOP.cpu.sii_l2t4_req[18] ^ `TOP.cpu.sii_l2t4_req[22] ^ `TOP.cpu.sii_l2t4_req[23] );

/*   0in custom
      -fire (($0in_rising_edge(sii_l2t4_req_vld)) && (sii_l2t4_req[24] == 0) && (sii_l2t4_req[25] == 0) && (sii_l2t4_req[26] == 1) && !(sii_wri_l4_p2 == sii_l2b4_ecc[2]))
      -clock l2clk
      -message "ctag error for wri in sii_l2:  p2 does not equal c2"
      -module cpu  -reset `TB_RST
      -name sii_l2_l4_ctag_ecc_wri_p2
*/

wire sii_wri_l4_p3 =  (`TOP.cpu.sii_l2t4_req[12] ^ `TOP.cpu.sii_l2t4_req[13] ^ `TOP.cpu.sii_l2t4_req[14] ^ `TOP.cpu.sii_l2t4_req[15] ^ `TOP.cpu.sii_l2t4_req[16] ^ `TOP.cpu.sii_l2t4_req[17] ^ `TOP.cpu.sii_l2t4_req[18] );

/*   0in custom
      -fire (($0in_rising_edge(sii_l2t4_req_vld)) && (sii_l2t4_req[24] == 0) && (sii_l2t4_req[25] == 0) && (sii_l2t4_req[26] == 1) && !(sii_wri_l4_p3 == sii_l2b4_ecc[3]))
      -clock l2clk
      -message "ctag error for wri in sii_l2:  p3 does not equal c3"
      -module cpu  -reset `TB_RST
      -name sii_l2_l4_ctag_ecc_wri_p3
*/

wire sii_wri_l4_p4 =  (`TOP.cpu.sii_l2t4_req[19] ^ `TOP.cpu.sii_l2t4_req[20] ^ `TOP.cpu.sii_l2t4_req[21] ^ `TOP.cpu.sii_l2t4_req[22] ^ `TOP.cpu.sii_l2t4_req[23] );

/*   0in custom
      -fire (($0in_rising_edge(sii_l2t4_req_vld)) && (sii_l2t4_req[24] == 0) && (sii_l2t4_req[25] == 0) && (sii_l2t4_req[26] == 1) && !(sii_wri_l4_p4 == sii_l2b4_ecc[4]))
      -clock l2clk
      -message "ctag error for wri in sii_l2:  p4 does not equal c4"
      -module cpu  -reset `TB_RST
      -name sii_l2_l4_ctag_ecc_wri_p4
*/

wire sii_wri_l4_p5 =  (`TOP.cpu.sii_l2t4_req[8] ^ `TOP.cpu.sii_l2t4_req[9] ^ `TOP.cpu.sii_l2t4_req[10] ^ `TOP.cpu.sii_l2t4_req[12] ^ `TOP.cpu.sii_l2t4_req[13] ^ `TOP.cpu.sii_l2t4_req[15] ^ `TOP.cpu.sii_l2t4_req[18] ^ `TOP.cpu.sii_l2t4_req[19] ^ `TOP.cpu.sii_l2t4_req[20] ^ `TOP.cpu.sii_l2t4_req[22] );

/*   0in custom
      -fire (($0in_rising_edge(sii_l2t4_req_vld)) && (sii_l2t4_req[24] == 0) && (sii_l2t4_req[25] == 0) && (sii_l2t4_req[26] == 1) && !(sii_wri_l4_p5 == sii_l2b4_ecc[5]))
      -clock l2clk
      -message "ctag error for wri in sii_l2:  p5 does not equal c5"
      -module cpu  -reset `TB_RST
      -name sii_l2_l4_ctag_ecc_wri_p5
*/

wire sii_wri_l5_p0 =  (`TOP.cpu.sii_l2t5_req[8] ^ `TOP.cpu.sii_l2t5_req[9] ^ `TOP.cpu.sii_l2t5_req[11] ^ `TOP.cpu.sii_l2t5_req[12] ^ `TOP.cpu.sii_l2t5_req[14] ^ `TOP.cpu.sii_l2t5_req[16] ^ `TOP.cpu.sii_l2t5_req[18] ^ `TOP.cpu.sii_l2t5_req[19] ^ `TOP.cpu.sii_l2t5_req[21] ^ `TOP.cpu.sii_l2t5_req[23] );

/*   0in custom
      -fire (($0in_rising_edge(sii_l2t5_req_vld)) && (sii_l2t5_req[24] == 0) && (sii_l2t5_req[25] == 0) && (sii_l2t5_req[26] == 1) && !(sii_wri_l5_p0 == sii_l2b5_ecc[0]))
      -clock l2clk
      -message "ctag error for wri in sii_l2:  p0 does not equal c0"
      -module cpu  -reset `TB_RST
      -name sii_l2_l5_ctag_ecc_wri_p0
*/

wire sii_wri_l5_p1 =  (`TOP.cpu.sii_l2t5_req[8] ^ `TOP.cpu.sii_l2t5_req[10] ^ `TOP.cpu.sii_l2t5_req[11] ^ `TOP.cpu.sii_l2t5_req[13] ^ `TOP.cpu.sii_l2t5_req[14] ^ `TOP.cpu.sii_l2t5_req[17] ^ `TOP.cpu.sii_l2t5_req[18] ^ `TOP.cpu.sii_l2t5_req[20] ^ `TOP.cpu.sii_l2t5_req[21] );

/*   0in custom
      -fire (($0in_rising_edge(sii_l2t5_req_vld)) && (sii_l2t5_req[24] == 0) && (sii_l2t5_req[25] == 0) && (sii_l2t5_req[26] == 1) && !(sii_wri_l5_p1 == sii_l2b5_ecc[1]))
      -clock l2clk
      -message "ctag error for wri in sii_l2:  p1 does not equal c1"
      -module cpu  -reset `TB_RST
      -name sii_l2_l5_ctag_ecc_wri_p1
*/

wire sii_wri_l5_p2 =  (`TOP.cpu.sii_l2t5_req[9] ^ `TOP.cpu.sii_l2t5_req[10] ^ `TOP.cpu.sii_l2t5_req[11] ^ `TOP.cpu.sii_l2t5_req[15] ^ `TOP.cpu.sii_l2t5_req[16] ^ `TOP.cpu.sii_l2t5_req[17] ^ `TOP.cpu.sii_l2t5_req[18] ^ `TOP.cpu.sii_l2t5_req[22] ^ `TOP.cpu.sii_l2t5_req[23] );

/*   0in custom
      -fire (($0in_rising_edge(sii_l2t5_req_vld)) && (sii_l2t5_req[24] == 0) && (sii_l2t5_req[25] == 0) && (sii_l2t5_req[26] == 1) && !(sii_wri_l5_p2 == sii_l2b5_ecc[2]))
      -clock l2clk
      -message "ctag error for wri in sii_l2:  p2 does not equal c2"
      -module cpu  -reset `TB_RST
      -name sii_l2_l5_ctag_ecc_wri_p2
*/

wire sii_wri_l5_p3 =  (`TOP.cpu.sii_l2t5_req[12] ^ `TOP.cpu.sii_l2t5_req[13] ^ `TOP.cpu.sii_l2t5_req[14] ^ `TOP.cpu.sii_l2t5_req[15] ^ `TOP.cpu.sii_l2t5_req[16] ^ `TOP.cpu.sii_l2t5_req[17] ^ `TOP.cpu.sii_l2t5_req[18] );

/*   0in custom
      -fire (($0in_rising_edge(sii_l2t5_req_vld)) && (sii_l2t5_req[24] == 0) && (sii_l2t5_req[25] == 0) && (sii_l2t5_req[26] == 1) && !(sii_wri_l5_p3 == sii_l2b5_ecc[3]))
      -clock l2clk
      -message "ctag error for wri in sii_l2:  p3 does not equal c3"
      -module cpu  -reset `TB_RST
      -name sii_l2_l5_ctag_ecc_wri_p3
*/

wire sii_wri_l5_p4 =  (`TOP.cpu.sii_l2t5_req[19] ^ `TOP.cpu.sii_l2t5_req[20] ^ `TOP.cpu.sii_l2t5_req[21] ^ `TOP.cpu.sii_l2t5_req[22] ^ `TOP.cpu.sii_l2t5_req[23] );

/*   0in custom
      -fire (($0in_rising_edge(sii_l2t5_req_vld)) && (sii_l2t5_req[24] == 0) && (sii_l2t5_req[25] == 0) && (sii_l2t5_req[26] == 1) && !(sii_wri_l5_p4 == sii_l2b5_ecc[4]))
      -clock l2clk
      -message "ctag error for wri in sii_l2:  p4 does not equal c4"
      -module cpu  -reset `TB_RST
      -name sii_l2_l5_ctag_ecc_wri_p4
*/

wire sii_wri_l5_p5 =  (`TOP.cpu.sii_l2t5_req[8] ^ `TOP.cpu.sii_l2t5_req[9] ^ `TOP.cpu.sii_l2t5_req[10] ^ `TOP.cpu.sii_l2t5_req[12] ^ `TOP.cpu.sii_l2t5_req[13] ^ `TOP.cpu.sii_l2t5_req[15] ^ `TOP.cpu.sii_l2t5_req[18] ^ `TOP.cpu.sii_l2t5_req[19] ^ `TOP.cpu.sii_l2t5_req[20] ^ `TOP.cpu.sii_l2t5_req[22] );

/*   0in custom
      -fire (($0in_rising_edge(sii_l2t5_req_vld)) && (sii_l2t5_req[24] == 0) && (sii_l2t5_req[25] == 0) && (sii_l2t5_req[26] == 1) && !(sii_wri_l5_p5 == sii_l2b5_ecc[5]))
      -clock l2clk
      -message "ctag error for wri in sii_l2:  p5 does not equal c5"
      -module cpu  -reset `TB_RST
      -name sii_l2_l5_ctag_ecc_wri_p5
*/

wire sii_wri_l6_p0 =  (`TOP.cpu.sii_l2t6_req[8] ^ `TOP.cpu.sii_l2t6_req[9] ^ `TOP.cpu.sii_l2t6_req[11] ^ `TOP.cpu.sii_l2t6_req[12] ^ `TOP.cpu.sii_l2t6_req[14] ^ `TOP.cpu.sii_l2t6_req[16] ^ `TOP.cpu.sii_l2t6_req[18] ^ `TOP.cpu.sii_l2t6_req[19] ^ `TOP.cpu.sii_l2t6_req[21] ^ `TOP.cpu.sii_l2t6_req[23] );

/*   0in custom
      -fire (($0in_rising_edge(sii_l2t6_req_vld)) && (sii_l2t6_req[24] == 0) && (sii_l2t6_req[25] == 0) && (sii_l2t6_req[26] == 1) && !(sii_wri_l6_p0 == sii_l2b6_ecc[0]))
      -clock l2clk
      -message "ctag error for wri in sii_l2:  p0 does not equal c0"
      -module cpu  -reset `TB_RST
      -name sii_l2_l6_ctag_ecc_wri_p0
*/

wire sii_wri_l6_p1 =  (`TOP.cpu.sii_l2t6_req[8] ^ `TOP.cpu.sii_l2t6_req[10] ^ `TOP.cpu.sii_l2t6_req[11] ^ `TOP.cpu.sii_l2t6_req[13] ^ `TOP.cpu.sii_l2t6_req[14] ^ `TOP.cpu.sii_l2t6_req[17] ^ `TOP.cpu.sii_l2t6_req[18] ^ `TOP.cpu.sii_l2t6_req[20] ^ `TOP.cpu.sii_l2t6_req[21] );

/*   0in custom
      -fire (($0in_rising_edge(sii_l2t6_req_vld)) && (sii_l2t6_req[24] == 0) && (sii_l2t6_req[25] == 0) && (sii_l2t6_req[26] == 1) && !(sii_wri_l6_p1 == sii_l2b6_ecc[1]))
      -clock l2clk
      -message "ctag error for wri in sii_l2:  p1 does not equal c1"
      -module cpu  -reset `TB_RST
      -name sii_l2_l6_ctag_ecc_wri_p1
*/

wire sii_wri_l6_p2 =  (`TOP.cpu.sii_l2t6_req[9] ^ `TOP.cpu.sii_l2t6_req[10] ^ `TOP.cpu.sii_l2t6_req[11] ^ `TOP.cpu.sii_l2t6_req[15] ^ `TOP.cpu.sii_l2t6_req[16] ^ `TOP.cpu.sii_l2t6_req[17] ^ `TOP.cpu.sii_l2t6_req[18] ^ `TOP.cpu.sii_l2t6_req[22] ^ `TOP.cpu.sii_l2t6_req[23] );

/*   0in custom
      -fire (($0in_rising_edge(sii_l2t6_req_vld)) && (sii_l2t6_req[24] == 0) && (sii_l2t6_req[25] == 0) && (sii_l2t6_req[26] == 1) && !(sii_wri_l6_p2 == sii_l2b6_ecc[2]))
      -clock l2clk
      -message "ctag error for wri in sii_l2:  p2 does not equal c2"
      -module cpu  -reset `TB_RST
      -name sii_l2_l6_ctag_ecc_wri_p2
*/

wire sii_wri_l6_p3 =  (`TOP.cpu.sii_l2t6_req[12] ^ `TOP.cpu.sii_l2t6_req[13] ^ `TOP.cpu.sii_l2t6_req[14] ^ `TOP.cpu.sii_l2t6_req[15] ^ `TOP.cpu.sii_l2t6_req[16] ^ `TOP.cpu.sii_l2t6_req[17] ^ `TOP.cpu.sii_l2t6_req[18] );

/*   0in custom
      -fire (($0in_rising_edge(sii_l2t6_req_vld)) && (sii_l2t6_req[24] == 0) && (sii_l2t6_req[25] == 0) && (sii_l2t6_req[26] == 1) && !(sii_wri_l6_p3 == sii_l2b6_ecc[3]))
      -clock l2clk
      -message "ctag error for wri in sii_l2:  p3 does not equal c3"
      -module cpu  -reset `TB_RST
      -name sii_l2_l6_ctag_ecc_wri_p3
*/

wire sii_wri_l6_p4 =  (`TOP.cpu.sii_l2t6_req[19] ^ `TOP.cpu.sii_l2t6_req[20] ^ `TOP.cpu.sii_l2t6_req[21] ^ `TOP.cpu.sii_l2t6_req[22] ^ `TOP.cpu.sii_l2t6_req[23] );

/*   0in custom
      -fire (($0in_rising_edge(sii_l2t6_req_vld)) && (sii_l2t6_req[24] == 0) && (sii_l2t6_req[25] == 0) && (sii_l2t6_req[26] == 1) && !(sii_wri_l6_p4 == sii_l2b6_ecc[4]))
      -clock l2clk
      -message "ctag error for wri in sii_l2:  p4 does not equal c4"
      -module cpu  -reset `TB_RST
      -name sii_l2_l6_ctag_ecc_wri_p4
*/

wire sii_wri_l6_p5 =  (`TOP.cpu.sii_l2t6_req[8] ^ `TOP.cpu.sii_l2t6_req[9] ^ `TOP.cpu.sii_l2t6_req[10] ^ `TOP.cpu.sii_l2t6_req[12] ^ `TOP.cpu.sii_l2t6_req[13] ^ `TOP.cpu.sii_l2t6_req[15] ^ `TOP.cpu.sii_l2t6_req[18] ^ `TOP.cpu.sii_l2t6_req[19] ^ `TOP.cpu.sii_l2t6_req[20] ^ `TOP.cpu.sii_l2t6_req[22] );

/*   0in custom
      -fire (($0in_rising_edge(sii_l2t6_req_vld)) && (sii_l2t6_req[24] == 0) && (sii_l2t6_req[25] == 0) && (sii_l2t6_req[26] == 1) && !(sii_wri_l6_p5 == sii_l2b6_ecc[5]))
      -clock l2clk
      -message "ctag error for wri in sii_l2:  p5 does not equal c5"
      -module cpu  -reset `TB_RST
      -name sii_l2_l6_ctag_ecc_wri_p5
*/

wire sii_wri_l7_p0 =  (`TOP.cpu.sii_l2t7_req[8] ^ `TOP.cpu.sii_l2t7_req[9] ^ `TOP.cpu.sii_l2t7_req[11] ^ `TOP.cpu.sii_l2t7_req[12] ^ `TOP.cpu.sii_l2t7_req[14] ^ `TOP.cpu.sii_l2t7_req[16] ^ `TOP.cpu.sii_l2t7_req[18] ^ `TOP.cpu.sii_l2t7_req[19] ^ `TOP.cpu.sii_l2t7_req[21] ^ `TOP.cpu.sii_l2t7_req[23] );

/*   0in custom
      -fire (($0in_rising_edge(sii_l2t7_req_vld)) && (sii_l2t7_req[24] == 0) && (sii_l2t7_req[25] == 0) && (sii_l2t7_req[26] == 1) && !(sii_wri_l7_p0 == sii_l2b7_ecc[0]))
      -clock l2clk
      -message "ctag error for wri in sii_l2:  p0 does not equal c0"
      -module cpu  -reset `TB_RST
      -name sii_l2_l7_ctag_ecc_wri_p0
*/

wire sii_wri_l7_p1 =  (`TOP.cpu.sii_l2t7_req[8] ^ `TOP.cpu.sii_l2t7_req[10] ^ `TOP.cpu.sii_l2t7_req[11] ^ `TOP.cpu.sii_l2t7_req[13] ^ `TOP.cpu.sii_l2t7_req[14] ^ `TOP.cpu.sii_l2t7_req[17] ^ `TOP.cpu.sii_l2t7_req[18] ^ `TOP.cpu.sii_l2t7_req[20] ^ `TOP.cpu.sii_l2t7_req[21] );

/*   0in custom
      -fire (($0in_rising_edge(sii_l2t7_req_vld)) && (sii_l2t7_req[24] == 0) && (sii_l2t7_req[25] == 0) && (sii_l2t7_req[26] == 1) && !(sii_wri_l7_p1 == sii_l2b7_ecc[1]))
      -clock l2clk
      -message "ctag error for wri in sii_l2:  p1 does not equal c1"
      -module cpu  -reset `TB_RST
      -name sii_l2_l7_ctag_ecc_wri_p1
*/

wire sii_wri_l7_p2 =  (`TOP.cpu.sii_l2t7_req[9] ^ `TOP.cpu.sii_l2t7_req[10] ^ `TOP.cpu.sii_l2t7_req[11] ^ `TOP.cpu.sii_l2t7_req[15] ^ `TOP.cpu.sii_l2t7_req[16] ^ `TOP.cpu.sii_l2t7_req[17] ^ `TOP.cpu.sii_l2t7_req[18] ^ `TOP.cpu.sii_l2t7_req[22] ^ `TOP.cpu.sii_l2t7_req[23] );

/*   0in custom
      -fire (($0in_rising_edge(sii_l2t7_req_vld)) && (sii_l2t7_req[24] == 0) && (sii_l2t7_req[25] == 0) && (sii_l2t7_req[26] == 1) && !(sii_wri_l7_p2 == sii_l2b7_ecc[2]))
      -clock l2clk
      -message "ctag error for wri in sii_l2:  p2 does not equal c2"
      -module cpu  -reset `TB_RST
      -name sii_l2_l7_ctag_ecc_wri_p2
*/

wire sii_wri_l7_p3 =  (`TOP.cpu.sii_l2t7_req[12] ^ `TOP.cpu.sii_l2t7_req[13] ^ `TOP.cpu.sii_l2t7_req[14] ^ `TOP.cpu.sii_l2t7_req[15] ^ `TOP.cpu.sii_l2t7_req[16] ^ `TOP.cpu.sii_l2t7_req[17] ^ `TOP.cpu.sii_l2t7_req[18] );

/*   0in custom
      -fire (($0in_rising_edge(sii_l2t7_req_vld)) && (sii_l2t7_req[24] == 0) && (sii_l2t7_req[25] == 0) && (sii_l2t7_req[26] == 1) && !(sii_wri_l7_p3 == sii_l2b7_ecc[3]))
      -clock l2clk
      -message "ctag error for wri in sii_l2:  p3 does not equal c3"
      -module cpu  -reset `TB_RST
      -name sii_l2_l7_ctag_ecc_wri_p3
*/

wire sii_wri_l7_p4 =  (`TOP.cpu.sii_l2t7_req[19] ^ `TOP.cpu.sii_l2t7_req[20] ^ `TOP.cpu.sii_l2t7_req[21] ^ `TOP.cpu.sii_l2t7_req[22] ^ `TOP.cpu.sii_l2t7_req[23] );

/*   0in custom
      -fire (($0in_rising_edge(sii_l2t7_req_vld)) && (sii_l2t7_req[24] == 0) && (sii_l2t7_req[25] == 0) && (sii_l2t7_req[26] == 1) && !(sii_wri_l7_p4 == sii_l2b7_ecc[4]))
      -clock l2clk
      -message "ctag error for wri in sii_l2:  p4 does not equal c4"
      -module cpu  -reset `TB_RST
      -name sii_l2_l7_ctag_ecc_wri_p4
*/

wire sii_wri_l7_p5 =  (`TOP.cpu.sii_l2t7_req[8] ^ `TOP.cpu.sii_l2t7_req[9] ^ `TOP.cpu.sii_l2t7_req[10] ^ `TOP.cpu.sii_l2t7_req[12] ^ `TOP.cpu.sii_l2t7_req[13] ^ `TOP.cpu.sii_l2t7_req[15] ^ `TOP.cpu.sii_l2t7_req[18] ^ `TOP.cpu.sii_l2t7_req[19] ^ `TOP.cpu.sii_l2t7_req[20] ^ `TOP.cpu.sii_l2t7_req[22] );

/*   0in custom
      -fire (($0in_rising_edge(sii_l2t7_req_vld)) && (sii_l2t7_req[24] == 0) && (sii_l2t7_req[25] == 0) && (sii_l2t7_req[26] == 1) && !(sii_wri_l7_p5 == sii_l2b7_ecc[5]))
      -clock l2clk
      -message "ctag error for wri in sii_l2:  p5 does not equal c5"
      -module cpu  -reset `TB_RST
      -name sii_l2_l7_ctag_ecc_wri_p5
*/

/*************************************************************************
*
*  Check for data ecc checkers SII ->  L2
*  For WR8
*
**************************************************************************/

wire sii_wr8_ecc0_l0_cycle1 =  (`TOP.cpu.sii_l2t0_req[0] ^ `TOP.cpu.sii_l2t0_req[1] ^ `TOP.cpu.sii_l2t0_req[3] ^ `TOP.cpu.sii_l2t0_req[4] ^ `TOP.cpu.sii_l2t0_req[6] ^ `TOP.cpu.sii_l2t0_req[8] ^ `TOP.cpu.sii_l2t0_req[10] ^ `TOP.cpu.sii_l2t0_req[11] ^ `TOP.cpu.sii_l2t0_req[13] ^ `TOP.cpu.sii_l2t0_req[15] ^ `TOP.cpu.sii_l2t0_req[17] ^ `TOP.cpu.sii_l2t0_req[19] ^ `TOP.cpu.sii_l2t0_req[21] ^ `TOP.cpu.sii_l2t0_req[23] ^ `TOP.cpu.sii_l2t0_req[25] ^ `TOP.cpu.sii_l2t0_req[26] ^ `TOP.cpu.sii_l2t0_req[28] ^ `TOP.cpu.sii_l2t0_req[30] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t0_req_vld,2))) && ($0in_delay(sii_l2t0_req[24] == 0,2)) && ($0in_delay(sii_l2t0_req[25] == 1,2)) && ($0in_delay(sii_l2t0_req[26] == 0,2)) && !(sii_wr8_ecc0_l0_cycle1 == sii_l2b0_ecc[0]))
      -clock l2clk
      -message "data ecc error for wr8 in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc0_l0_wr8_cycle1
*/

wire sii_wr8_ecc1_l0_cycle1 =  (`TOP.cpu.sii_l2t0_req[0] ^ `TOP.cpu.sii_l2t0_req[2] ^ `TOP.cpu.sii_l2t0_req[3] ^ `TOP.cpu.sii_l2t0_req[5] ^ `TOP.cpu.sii_l2t0_req[6] ^ `TOP.cpu.sii_l2t0_req[9] ^ `TOP.cpu.sii_l2t0_req[10] ^ `TOP.cpu.sii_l2t0_req[12] ^ `TOP.cpu.sii_l2t0_req[13] ^ `TOP.cpu.sii_l2t0_req[16] ^ `TOP.cpu.sii_l2t0_req[17] ^ `TOP.cpu.sii_l2t0_req[20] ^ `TOP.cpu.sii_l2t0_req[21] ^ `TOP.cpu.sii_l2t0_req[24] ^ `TOP.cpu.sii_l2t0_req[25] ^ `TOP.cpu.sii_l2t0_req[27] ^ `TOP.cpu.sii_l2t0_req[28] ^ `TOP.cpu.sii_l2t0_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t0_req_vld,2))) && ($0in_delay(sii_l2t0_req[24] == 0,2)) && ($0in_delay(sii_l2t0_req[25] == 1,2)) && ($0in_delay(sii_l2t0_req[26] == 0,2)) && !(sii_wr8_ecc1_l0_cycle1 == sii_l2b0_ecc[1]))
      -clock l2clk
      -message "data ecc error for wr8 in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc1_l0_wr8_cycle1
*/

wire sii_wr8_ecc2_l0_cycle1 =  (`TOP.cpu.sii_l2t0_req[1] ^ `TOP.cpu.sii_l2t0_req[2] ^ `TOP.cpu.sii_l2t0_req[3] ^ `TOP.cpu.sii_l2t0_req[7] ^ `TOP.cpu.sii_l2t0_req[8] ^ `TOP.cpu.sii_l2t0_req[9] ^ `TOP.cpu.sii_l2t0_req[10] ^ `TOP.cpu.sii_l2t0_req[14] ^ `TOP.cpu.sii_l2t0_req[15] ^ `TOP.cpu.sii_l2t0_req[16] ^ `TOP.cpu.sii_l2t0_req[17] ^ `TOP.cpu.sii_l2t0_req[22] ^ `TOP.cpu.sii_l2t0_req[23] ^ `TOP.cpu.sii_l2t0_req[24] ^ `TOP.cpu.sii_l2t0_req[25] ^ `TOP.cpu.sii_l2t0_req[29] ^ `TOP.cpu.sii_l2t0_req[30] ^ `TOP.cpu.sii_l2t0_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t0_req_vld,2))) && ($0in_delay(sii_l2t0_req[24] == 0,2)) && ($0in_delay(sii_l2t0_req[25] == 1,2)) && ($0in_delay(sii_l2t0_req[26] == 0,2)) && !(sii_wr8_ecc2_l0_cycle1 == sii_l2b0_ecc[2]))
      -clock l2clk
      -message "data ecc error for wr8 in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc2_l0_wr8_cycle1
*/

wire sii_wr8_ecc3_l0_cycle1 =  (`TOP.cpu.sii_l2t0_req[4] ^ `TOP.cpu.sii_l2t0_req[5] ^ `TOP.cpu.sii_l2t0_req[6] ^ `TOP.cpu.sii_l2t0_req[7] ^ `TOP.cpu.sii_l2t0_req[8] ^ `TOP.cpu.sii_l2t0_req[9] ^ `TOP.cpu.sii_l2t0_req[10] ^ `TOP.cpu.sii_l2t0_req[18] ^ `TOP.cpu.sii_l2t0_req[19] ^ `TOP.cpu.sii_l2t0_req[20] ^ `TOP.cpu.sii_l2t0_req[21] ^ `TOP.cpu.sii_l2t0_req[22] ^ `TOP.cpu.sii_l2t0_req[23] ^ `TOP.cpu.sii_l2t0_req[24] ^ `TOP.cpu.sii_l2t0_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t0_req_vld,2))) && ($0in_delay(sii_l2t0_req[24] == 0,2)) && ($0in_delay(sii_l2t0_req[25] == 1,2)) && ($0in_delay(sii_l2t0_req[26] == 0,2)) && !(sii_wr8_ecc3_l0_cycle1 == sii_l2b0_ecc[3]))
      -clock l2clk
      -message "data ecc error for wr8 in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc3_l0_wr8_cycle1
*/

wire sii_wr8_ecc4_l0_cycle1 =  ( `TOP.cpu.sii_l2t0_req[11] ^ `TOP.cpu.sii_l2t0_req[12] ^ `TOP.cpu.sii_l2t0_req[13] ^ `TOP.cpu.sii_l2t0_req[14] ^ `TOP.cpu.sii_l2t0_req[15] ^ `TOP.cpu.sii_l2t0_req[16] ^ `TOP.cpu.sii_l2t0_req[17] ^ `TOP.cpu.sii_l2t0_req[18] ^ `TOP.cpu.sii_l2t0_req[19] ^ `TOP.cpu.sii_l2t0_req[20] ^ `TOP.cpu.sii_l2t0_req[21] ^ `TOP.cpu.sii_l2t0_req[22] ^ `TOP.cpu.sii_l2t0_req[23] ^ `TOP.cpu.sii_l2t0_req[24] ^ `TOP.cpu.sii_l2t0_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t0_req_vld,2))) && ($0in_delay(sii_l2t0_req[24] == 0,2)) && ($0in_delay(sii_l2t0_req[25] == 1,2)) && ($0in_delay(sii_l2t0_req[26] == 0,2)) && !(sii_wr8_ecc4_l0_cycle1 == sii_l2b0_ecc[4]))
      -clock l2clk
      -message "data ecc error for wr8 in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc4_l0_wr8_cycle1
*/

wire sii_wr8_ecc5_l0_cycle1 =  (`TOP.cpu.sii_l2t0_req[26] ^ `TOP.cpu.sii_l2t0_req[27] ^ `TOP.cpu.sii_l2t0_req[28] ^ `TOP.cpu.sii_l2t0_req[29] ^ `TOP.cpu.sii_l2t0_req[30] ^ `TOP.cpu.sii_l2t0_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t0_req_vld,2))) && ($0in_delay(sii_l2t0_req[24] == 0,2)) && ($0in_delay(sii_l2t0_req[25] == 1,2)) && ($0in_delay(sii_l2t0_req[26] == 0,2)) && !(sii_wr8_ecc5_l0_cycle1 == sii_l2b0_ecc[5]))
      -clock l2clk
      -message "data ecc error for wr8 in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc5_l0_wr8_cycle1
*/

wire sii_wr8_ecc6_l0_cycle1 =  (`TOP.cpu.sii_l2t0_req[0] ^ `TOP.cpu.sii_l2t0_req[1] ^ `TOP.cpu.sii_l2t0_req[2] ^ `TOP.cpu.sii_l2t0_req[4] ^ `TOP.cpu.sii_l2t0_req[5] ^ `TOP.cpu.sii_l2t0_req[7] ^ `TOP.cpu.sii_l2t0_req[10] ^ `TOP.cpu.sii_l2t0_req[11] ^ `TOP.cpu.sii_l2t0_req[12] ^ `TOP.cpu.sii_l2t0_req[14] ^ `TOP.cpu.sii_l2t0_req[17] ^ `TOP.cpu.sii_l2t0_req[18] ^ `TOP.cpu.sii_l2t0_req[21] ^ `TOP.cpu.sii_l2t0_req[23] ^ `TOP.cpu.sii_l2t0_req[24] ^ `TOP.cpu.sii_l2t0_req[26] ^ `TOP.cpu.sii_l2t0_req[27] ^ `TOP.cpu.sii_l2t0_req[29] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t0_req_vld,2))) && ($0in_delay(sii_l2t0_req[24] == 0,2)) && ($0in_delay(sii_l2t0_req[25] == 1,2)) && ($0in_delay(sii_l2t0_req[26] == 0,2)) && !(sii_wr8_ecc6_l0_cycle1 == sii_l2b0_ecc[6]))
      -clock l2clk
      -message "data ecc error for wr8 in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc6_l0_wr8_cycle1
*/

wire sii_wr8_ecc0_l0_cycle2 =  (`TOP.cpu.sii_l2t0_req[0] ^ `TOP.cpu.sii_l2t0_req[1] ^ `TOP.cpu.sii_l2t0_req[3] ^ `TOP.cpu.sii_l2t0_req[4] ^ `TOP.cpu.sii_l2t0_req[6] ^ `TOP.cpu.sii_l2t0_req[8] ^ `TOP.cpu.sii_l2t0_req[10] ^ `TOP.cpu.sii_l2t0_req[11] ^ `TOP.cpu.sii_l2t0_req[13] ^ `TOP.cpu.sii_l2t0_req[15] ^ `TOP.cpu.sii_l2t0_req[17] ^ `TOP.cpu.sii_l2t0_req[19] ^ `TOP.cpu.sii_l2t0_req[21] ^ `TOP.cpu.sii_l2t0_req[23] ^ `TOP.cpu.sii_l2t0_req[25] ^ `TOP.cpu.sii_l2t0_req[26] ^ `TOP.cpu.sii_l2t0_req[28] ^ `TOP.cpu.sii_l2t0_req[30] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t0_req_vld,3))) && ($0in_delay(sii_l2t0_req[24] == 0,3)) && ($0in_delay(sii_l2t0_req[25] == 1,3)) && ($0in_delay(sii_l2t0_req[26] == 0,3)) && !(sii_wr8_ecc0_l0_cycle2 == sii_l2b0_ecc[0]))
      -clock l2clk
      -message "data ecc error for wr8 in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc0_l0_wr8_cycle2
*/

wire sii_wr8_ecc1_l0_cycle2 =  (`TOP.cpu.sii_l2t0_req[0] ^ `TOP.cpu.sii_l2t0_req[2] ^ `TOP.cpu.sii_l2t0_req[3] ^ `TOP.cpu.sii_l2t0_req[5] ^ `TOP.cpu.sii_l2t0_req[6] ^ `TOP.cpu.sii_l2t0_req[9] ^ `TOP.cpu.sii_l2t0_req[10] ^ `TOP.cpu.sii_l2t0_req[12] ^ `TOP.cpu.sii_l2t0_req[13] ^ `TOP.cpu.sii_l2t0_req[16] ^ `TOP.cpu.sii_l2t0_req[17] ^ `TOP.cpu.sii_l2t0_req[20] ^ `TOP.cpu.sii_l2t0_req[21] ^ `TOP.cpu.sii_l2t0_req[24] ^ `TOP.cpu.sii_l2t0_req[25] ^ `TOP.cpu.sii_l2t0_req[27] ^ `TOP.cpu.sii_l2t0_req[28] ^ `TOP.cpu.sii_l2t0_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t0_req_vld,3))) && ($0in_delay(sii_l2t0_req[24] == 0,3)) && ($0in_delay(sii_l2t0_req[25] == 1,3)) && ($0in_delay(sii_l2t0_req[26] == 0,3)) && !(sii_wr8_ecc1_l0_cycle2 == sii_l2b0_ecc[1]))
      -clock l2clk
      -message "data ecc error for wr8 in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc1_l0_wr8_cycle2
*/

wire sii_wr8_ecc2_l0_cycle2 =  (`TOP.cpu.sii_l2t0_req[1] ^ `TOP.cpu.sii_l2t0_req[2] ^ `TOP.cpu.sii_l2t0_req[3] ^ `TOP.cpu.sii_l2t0_req[7] ^ `TOP.cpu.sii_l2t0_req[8] ^ `TOP.cpu.sii_l2t0_req[9] ^ `TOP.cpu.sii_l2t0_req[10] ^ `TOP.cpu.sii_l2t0_req[14] ^ `TOP.cpu.sii_l2t0_req[15] ^ `TOP.cpu.sii_l2t0_req[16] ^ `TOP.cpu.sii_l2t0_req[17] ^ `TOP.cpu.sii_l2t0_req[22] ^ `TOP.cpu.sii_l2t0_req[23] ^ `TOP.cpu.sii_l2t0_req[24] ^ `TOP.cpu.sii_l2t0_req[25] ^ `TOP.cpu.sii_l2t0_req[29] ^ `TOP.cpu.sii_l2t0_req[30] ^ `TOP.cpu.sii_l2t0_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t0_req_vld,3))) && ($0in_delay(sii_l2t0_req[24] == 0,3)) && ($0in_delay(sii_l2t0_req[25] == 1,3)) && ($0in_delay(sii_l2t0_req[26] == 0,3)) && !(sii_wr8_ecc2_l0_cycle2 == sii_l2b0_ecc[2]))
      -clock l2clk
      -message "data ecc error for wr8 in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc2_l0_wr8_cycle2
*/

wire sii_wr8_ecc3_l0_cycle2 =  (`TOP.cpu.sii_l2t0_req[4] ^ `TOP.cpu.sii_l2t0_req[5] ^ `TOP.cpu.sii_l2t0_req[6] ^ `TOP.cpu.sii_l2t0_req[7] ^ `TOP.cpu.sii_l2t0_req[8] ^ `TOP.cpu.sii_l2t0_req[9] ^ `TOP.cpu.sii_l2t0_req[10] ^ `TOP.cpu.sii_l2t0_req[18] ^ `TOP.cpu.sii_l2t0_req[19] ^ `TOP.cpu.sii_l2t0_req[20] ^ `TOP.cpu.sii_l2t0_req[21] ^ `TOP.cpu.sii_l2t0_req[22] ^ `TOP.cpu.sii_l2t0_req[23] ^ `TOP.cpu.sii_l2t0_req[24] ^ `TOP.cpu.sii_l2t0_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t0_req_vld,3))) && ($0in_delay(sii_l2t0_req[24] == 0,3)) && ($0in_delay(sii_l2t0_req[25] == 1,3)) && ($0in_delay(sii_l2t0_req[26] == 0,3)) && !(sii_wr8_ecc3_l0_cycle2 == sii_l2b0_ecc[3]))
      -clock l2clk
      -message "data ecc error for wr8 in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc3_l0_wr8_cycle2
*/

wire sii_wr8_ecc4_l0_cycle2 =  ( `TOP.cpu.sii_l2t0_req[11] ^ `TOP.cpu.sii_l2t0_req[12] ^ `TOP.cpu.sii_l2t0_req[13] ^ `TOP.cpu.sii_l2t0_req[14] ^ `TOP.cpu.sii_l2t0_req[15] ^ `TOP.cpu.sii_l2t0_req[16] ^ `TOP.cpu.sii_l2t0_req[17] ^ `TOP.cpu.sii_l2t0_req[18] ^ `TOP.cpu.sii_l2t0_req[19] ^ `TOP.cpu.sii_l2t0_req[20] ^ `TOP.cpu.sii_l2t0_req[21] ^ `TOP.cpu.sii_l2t0_req[22] ^ `TOP.cpu.sii_l2t0_req[23] ^ `TOP.cpu.sii_l2t0_req[24] ^ `TOP.cpu.sii_l2t0_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t0_req_vld,3))) && ($0in_delay(sii_l2t0_req[24] == 0,3)) && ($0in_delay(sii_l2t0_req[25] == 1,3)) && ($0in_delay(sii_l2t0_req[26] == 0,3)) && !(sii_wr8_ecc4_l0_cycle2 == sii_l2b0_ecc[4]))
      -clock l2clk
      -message "data ecc error for wr8 in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc4_l0_wr8_cycle2
*/

wire sii_wr8_ecc5_l0_cycle2 =  (`TOP.cpu.sii_l2t0_req[26] ^ `TOP.cpu.sii_l2t0_req[27] ^ `TOP.cpu.sii_l2t0_req[28] ^ `TOP.cpu.sii_l2t0_req[29] ^ `TOP.cpu.sii_l2t0_req[30] ^ `TOP.cpu.sii_l2t0_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t0_req_vld,3))) && ($0in_delay(sii_l2t0_req[24] == 0,3)) && ($0in_delay(sii_l2t0_req[25] == 1,3)) && ($0in_delay(sii_l2t0_req[26] == 0,3)) && !(sii_wr8_ecc5_l0_cycle2 == sii_l2b0_ecc[5]))
      -clock l2clk
      -message "data ecc error for wr8 in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc5_l0_wr8_cycle2
*/

wire sii_wr8_ecc6_l0_cycle2 =  (`TOP.cpu.sii_l2t0_req[0] ^ `TOP.cpu.sii_l2t0_req[1] ^ `TOP.cpu.sii_l2t0_req[2] ^ `TOP.cpu.sii_l2t0_req[4] ^ `TOP.cpu.sii_l2t0_req[5] ^ `TOP.cpu.sii_l2t0_req[7] ^ `TOP.cpu.sii_l2t0_req[10] ^ `TOP.cpu.sii_l2t0_req[11] ^ `TOP.cpu.sii_l2t0_req[12] ^ `TOP.cpu.sii_l2t0_req[14] ^ `TOP.cpu.sii_l2t0_req[17] ^ `TOP.cpu.sii_l2t0_req[18] ^ `TOP.cpu.sii_l2t0_req[21] ^ `TOP.cpu.sii_l2t0_req[23] ^ `TOP.cpu.sii_l2t0_req[24] ^ `TOP.cpu.sii_l2t0_req[26] ^ `TOP.cpu.sii_l2t0_req[27] ^ `TOP.cpu.sii_l2t0_req[29] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t0_req_vld,3))) && ($0in_delay(sii_l2t0_req[24] == 0,3)) && ($0in_delay(sii_l2t0_req[25] == 1,3)) && ($0in_delay(sii_l2t0_req[26] == 0,3)) && !(sii_wr8_ecc6_l0_cycle2 == sii_l2b0_ecc[6]))
      -clock l2clk
      -message "data ecc error for wr8 in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc6_l0_wr8_cycle2
*/

wire sii_wr8_ecc0_l1_cycle1 =  (`TOP.cpu.sii_l2t1_req[0] ^ `TOP.cpu.sii_l2t1_req[1] ^ `TOP.cpu.sii_l2t1_req[3] ^ `TOP.cpu.sii_l2t1_req[4] ^ `TOP.cpu.sii_l2t1_req[6] ^ `TOP.cpu.sii_l2t1_req[8] ^ `TOP.cpu.sii_l2t1_req[10] ^ `TOP.cpu.sii_l2t1_req[11] ^ `TOP.cpu.sii_l2t1_req[13] ^ `TOP.cpu.sii_l2t1_req[15] ^ `TOP.cpu.sii_l2t1_req[17] ^ `TOP.cpu.sii_l2t1_req[19] ^ `TOP.cpu.sii_l2t1_req[21] ^ `TOP.cpu.sii_l2t1_req[23] ^ `TOP.cpu.sii_l2t1_req[25] ^ `TOP.cpu.sii_l2t1_req[26] ^ `TOP.cpu.sii_l2t1_req[28] ^ `TOP.cpu.sii_l2t1_req[30] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t1_req_vld,2))) && ($0in_delay(sii_l2t1_req[24] == 0,2)) && ($0in_delay(sii_l2t1_req[25] == 1,2)) && ($0in_delay(sii_l2t1_req[26] == 0,2)) && !(sii_wr8_ecc0_l1_cycle1 == sii_l2b1_ecc[0]))
      -clock l2clk
      -message "data ecc error for wr8 in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc0_l1_wr8_cycle1
*/

wire sii_wr8_ecc1_l1_cycle1 =  (`TOP.cpu.sii_l2t1_req[0] ^ `TOP.cpu.sii_l2t1_req[2] ^ `TOP.cpu.sii_l2t1_req[3] ^ `TOP.cpu.sii_l2t1_req[5] ^ `TOP.cpu.sii_l2t1_req[6] ^ `TOP.cpu.sii_l2t1_req[9] ^ `TOP.cpu.sii_l2t1_req[10] ^ `TOP.cpu.sii_l2t1_req[12] ^ `TOP.cpu.sii_l2t1_req[13] ^ `TOP.cpu.sii_l2t1_req[16] ^ `TOP.cpu.sii_l2t1_req[17] ^ `TOP.cpu.sii_l2t1_req[20] ^ `TOP.cpu.sii_l2t1_req[21] ^ `TOP.cpu.sii_l2t1_req[24] ^ `TOP.cpu.sii_l2t1_req[25] ^ `TOP.cpu.sii_l2t1_req[27] ^ `TOP.cpu.sii_l2t1_req[28] ^ `TOP.cpu.sii_l2t1_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t1_req_vld,2))) && ($0in_delay(sii_l2t1_req[24] == 0,2)) && ($0in_delay(sii_l2t1_req[25] == 1,2)) && ($0in_delay(sii_l2t1_req[26] == 0,2)) && !(sii_wr8_ecc1_l1_cycle1 == sii_l2b1_ecc[1]))
      -clock l2clk
      -message "data ecc error for wr8 in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc1_l1_wr8_cycle1
*/

wire sii_wr8_ecc2_l1_cycle1 =  (`TOP.cpu.sii_l2t1_req[1] ^ `TOP.cpu.sii_l2t1_req[2] ^ `TOP.cpu.sii_l2t1_req[3] ^ `TOP.cpu.sii_l2t1_req[7] ^ `TOP.cpu.sii_l2t1_req[8] ^ `TOP.cpu.sii_l2t1_req[9] ^ `TOP.cpu.sii_l2t1_req[10] ^ `TOP.cpu.sii_l2t1_req[14] ^ `TOP.cpu.sii_l2t1_req[15] ^ `TOP.cpu.sii_l2t1_req[16] ^ `TOP.cpu.sii_l2t1_req[17] ^ `TOP.cpu.sii_l2t1_req[22] ^ `TOP.cpu.sii_l2t1_req[23] ^ `TOP.cpu.sii_l2t1_req[24] ^ `TOP.cpu.sii_l2t1_req[25] ^ `TOP.cpu.sii_l2t1_req[29] ^ `TOP.cpu.sii_l2t1_req[30] ^ `TOP.cpu.sii_l2t1_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t1_req_vld,2))) && ($0in_delay(sii_l2t1_req[24] == 0,2)) && ($0in_delay(sii_l2t1_req[25] == 1,2)) && ($0in_delay(sii_l2t1_req[26] == 0,2)) && !(sii_wr8_ecc2_l1_cycle1 == sii_l2b1_ecc[2]))
      -clock l2clk
      -message "data ecc error for wr8 in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc2_l1_wr8_cycle1
*/

wire sii_wr8_ecc3_l1_cycle1 =  (`TOP.cpu.sii_l2t1_req[4] ^ `TOP.cpu.sii_l2t1_req[5] ^ `TOP.cpu.sii_l2t1_req[6] ^ `TOP.cpu.sii_l2t1_req[7] ^ `TOP.cpu.sii_l2t1_req[8] ^ `TOP.cpu.sii_l2t1_req[9] ^ `TOP.cpu.sii_l2t1_req[10] ^ `TOP.cpu.sii_l2t1_req[18] ^ `TOP.cpu.sii_l2t1_req[19] ^ `TOP.cpu.sii_l2t1_req[20] ^ `TOP.cpu.sii_l2t1_req[21] ^ `TOP.cpu.sii_l2t1_req[22] ^ `TOP.cpu.sii_l2t1_req[23] ^ `TOP.cpu.sii_l2t1_req[24] ^ `TOP.cpu.sii_l2t1_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t1_req_vld,2))) && ($0in_delay(sii_l2t1_req[24] == 0,2)) && ($0in_delay(sii_l2t1_req[25] == 1,2)) && ($0in_delay(sii_l2t1_req[26] == 0,2)) && !(sii_wr8_ecc3_l1_cycle1 == sii_l2b1_ecc[3]))
      -clock l2clk
      -message "data ecc error for wr8 in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc3_l1_wr8_cycle1
*/

wire sii_wr8_ecc4_l1_cycle1 =  ( `TOP.cpu.sii_l2t1_req[11] ^ `TOP.cpu.sii_l2t1_req[12] ^ `TOP.cpu.sii_l2t1_req[13] ^ `TOP.cpu.sii_l2t1_req[14] ^ `TOP.cpu.sii_l2t1_req[15] ^ `TOP.cpu.sii_l2t1_req[16] ^ `TOP.cpu.sii_l2t1_req[17] ^ `TOP.cpu.sii_l2t1_req[18] ^ `TOP.cpu.sii_l2t1_req[19] ^ `TOP.cpu.sii_l2t1_req[20] ^ `TOP.cpu.sii_l2t1_req[21] ^ `TOP.cpu.sii_l2t1_req[22] ^ `TOP.cpu.sii_l2t1_req[23] ^ `TOP.cpu.sii_l2t1_req[24] ^ `TOP.cpu.sii_l2t1_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t1_req_vld,2))) && ($0in_delay(sii_l2t1_req[24] == 0,2)) && ($0in_delay(sii_l2t1_req[25] == 1,2)) && ($0in_delay(sii_l2t1_req[26] == 0,2)) && !(sii_wr8_ecc4_l1_cycle1 == sii_l2b1_ecc[4]))
      -clock l2clk
      -message "data ecc error for wr8 in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc4_l1_wr8_cycle1
*/

wire sii_wr8_ecc5_l1_cycle1 =  (`TOP.cpu.sii_l2t1_req[26] ^ `TOP.cpu.sii_l2t1_req[27] ^ `TOP.cpu.sii_l2t1_req[28] ^ `TOP.cpu.sii_l2t1_req[29] ^ `TOP.cpu.sii_l2t1_req[30] ^ `TOP.cpu.sii_l2t1_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t1_req_vld,2))) && ($0in_delay(sii_l2t1_req[24] == 0,2)) && ($0in_delay(sii_l2t1_req[25] == 1,2)) && ($0in_delay(sii_l2t1_req[26] == 0,2)) && !(sii_wr8_ecc5_l1_cycle1 == sii_l2b1_ecc[5]))
      -clock l2clk
      -message "data ecc error for wr8 in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc5_l1_wr8_cycle1
*/

wire sii_wr8_ecc6_l1_cycle1 =  (`TOP.cpu.sii_l2t1_req[0] ^ `TOP.cpu.sii_l2t1_req[1] ^ `TOP.cpu.sii_l2t1_req[2] ^ `TOP.cpu.sii_l2t1_req[4] ^ `TOP.cpu.sii_l2t1_req[5] ^ `TOP.cpu.sii_l2t1_req[7] ^ `TOP.cpu.sii_l2t1_req[10] ^ `TOP.cpu.sii_l2t1_req[11] ^ `TOP.cpu.sii_l2t1_req[12] ^ `TOP.cpu.sii_l2t1_req[14] ^ `TOP.cpu.sii_l2t1_req[17] ^ `TOP.cpu.sii_l2t1_req[18] ^ `TOP.cpu.sii_l2t1_req[21] ^ `TOP.cpu.sii_l2t1_req[23] ^ `TOP.cpu.sii_l2t1_req[24] ^ `TOP.cpu.sii_l2t1_req[26] ^ `TOP.cpu.sii_l2t1_req[27] ^ `TOP.cpu.sii_l2t1_req[29] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t1_req_vld,2))) && ($0in_delay(sii_l2t1_req[24] == 0,2)) && ($0in_delay(sii_l2t1_req[25] == 1,2)) && ($0in_delay(sii_l2t1_req[26] == 0,2)) && !(sii_wr8_ecc6_l1_cycle1 == sii_l2b1_ecc[6]))
      -clock l2clk
      -message "data ecc error for wr8 in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc6_l1_wr8_cycle1
*/

wire sii_wr8_ecc0_l1_cycle2 =  (`TOP.cpu.sii_l2t1_req[0] ^ `TOP.cpu.sii_l2t1_req[1] ^ `TOP.cpu.sii_l2t1_req[3] ^ `TOP.cpu.sii_l2t1_req[4] ^ `TOP.cpu.sii_l2t1_req[6] ^ `TOP.cpu.sii_l2t1_req[8] ^ `TOP.cpu.sii_l2t1_req[10] ^ `TOP.cpu.sii_l2t1_req[11] ^ `TOP.cpu.sii_l2t1_req[13] ^ `TOP.cpu.sii_l2t1_req[15] ^ `TOP.cpu.sii_l2t1_req[17] ^ `TOP.cpu.sii_l2t1_req[19] ^ `TOP.cpu.sii_l2t1_req[21] ^ `TOP.cpu.sii_l2t1_req[23] ^ `TOP.cpu.sii_l2t1_req[25] ^ `TOP.cpu.sii_l2t1_req[26] ^ `TOP.cpu.sii_l2t1_req[28] ^ `TOP.cpu.sii_l2t1_req[30] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t1_req_vld,3))) && ($0in_delay(sii_l2t1_req[24] == 0,3)) && ($0in_delay(sii_l2t1_req[25] == 1,3)) && ($0in_delay(sii_l2t1_req[26] == 0,3)) && !(sii_wr8_ecc0_l1_cycle2 == sii_l2b1_ecc[0]))
      -clock l2clk
      -message "data ecc error for wr8 in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc0_l1_wr8_cycle2
*/

wire sii_wr8_ecc1_l1_cycle2 =  (`TOP.cpu.sii_l2t1_req[0] ^ `TOP.cpu.sii_l2t1_req[2] ^ `TOP.cpu.sii_l2t1_req[3] ^ `TOP.cpu.sii_l2t1_req[5] ^ `TOP.cpu.sii_l2t1_req[6] ^ `TOP.cpu.sii_l2t1_req[9] ^ `TOP.cpu.sii_l2t1_req[10] ^ `TOP.cpu.sii_l2t1_req[12] ^ `TOP.cpu.sii_l2t1_req[13] ^ `TOP.cpu.sii_l2t1_req[16] ^ `TOP.cpu.sii_l2t1_req[17] ^ `TOP.cpu.sii_l2t1_req[20] ^ `TOP.cpu.sii_l2t1_req[21] ^ `TOP.cpu.sii_l2t1_req[24] ^ `TOP.cpu.sii_l2t1_req[25] ^ `TOP.cpu.sii_l2t1_req[27] ^ `TOP.cpu.sii_l2t1_req[28] ^ `TOP.cpu.sii_l2t1_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t1_req_vld,3))) && ($0in_delay(sii_l2t1_req[24] == 0,3)) && ($0in_delay(sii_l2t1_req[25] == 1,3)) && ($0in_delay(sii_l2t1_req[26] == 0,3)) && !(sii_wr8_ecc1_l1_cycle2 == sii_l2b1_ecc[1]))
      -clock l2clk
      -message "data ecc error for wr8 in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc1_l1_wr8_cycle2
*/

wire sii_wr8_ecc2_l1_cycle2 =  (`TOP.cpu.sii_l2t1_req[1] ^ `TOP.cpu.sii_l2t1_req[2] ^ `TOP.cpu.sii_l2t1_req[3] ^ `TOP.cpu.sii_l2t1_req[7] ^ `TOP.cpu.sii_l2t1_req[8] ^ `TOP.cpu.sii_l2t1_req[9] ^ `TOP.cpu.sii_l2t1_req[10] ^ `TOP.cpu.sii_l2t1_req[14] ^ `TOP.cpu.sii_l2t1_req[15] ^ `TOP.cpu.sii_l2t1_req[16] ^ `TOP.cpu.sii_l2t1_req[17] ^ `TOP.cpu.sii_l2t1_req[22] ^ `TOP.cpu.sii_l2t1_req[23] ^ `TOP.cpu.sii_l2t1_req[24] ^ `TOP.cpu.sii_l2t1_req[25] ^ `TOP.cpu.sii_l2t1_req[29] ^ `TOP.cpu.sii_l2t1_req[30] ^ `TOP.cpu.sii_l2t1_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t1_req_vld,3))) && ($0in_delay(sii_l2t1_req[24] == 0,3)) && ($0in_delay(sii_l2t1_req[25] == 1,3)) && ($0in_delay(sii_l2t1_req[26] == 0,3)) && !(sii_wr8_ecc2_l1_cycle2 == sii_l2b1_ecc[2]))
      -clock l2clk
      -message "data ecc error for wr8 in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc2_l1_wr8_cycle2
*/

wire sii_wr8_ecc3_l1_cycle2 =  (`TOP.cpu.sii_l2t1_req[4] ^ `TOP.cpu.sii_l2t1_req[5] ^ `TOP.cpu.sii_l2t1_req[6] ^ `TOP.cpu.sii_l2t1_req[7] ^ `TOP.cpu.sii_l2t1_req[8] ^ `TOP.cpu.sii_l2t1_req[9] ^ `TOP.cpu.sii_l2t1_req[10] ^ `TOP.cpu.sii_l2t1_req[18] ^ `TOP.cpu.sii_l2t1_req[19] ^ `TOP.cpu.sii_l2t1_req[20] ^ `TOP.cpu.sii_l2t1_req[21] ^ `TOP.cpu.sii_l2t1_req[22] ^ `TOP.cpu.sii_l2t1_req[23] ^ `TOP.cpu.sii_l2t1_req[24] ^ `TOP.cpu.sii_l2t1_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t1_req_vld,3))) && ($0in_delay(sii_l2t1_req[24] == 0,3)) && ($0in_delay(sii_l2t1_req[25] == 1,3)) && ($0in_delay(sii_l2t1_req[26] == 0,3)) && !(sii_wr8_ecc3_l1_cycle2 == sii_l2b1_ecc[3]))
      -clock l2clk
      -message "data ecc error for wr8 in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc3_l1_wr8_cycle2
*/

wire sii_wr8_ecc4_l1_cycle2 =  ( `TOP.cpu.sii_l2t1_req[11] ^ `TOP.cpu.sii_l2t1_req[12] ^ `TOP.cpu.sii_l2t1_req[13] ^ `TOP.cpu.sii_l2t1_req[14] ^ `TOP.cpu.sii_l2t1_req[15] ^ `TOP.cpu.sii_l2t1_req[16] ^ `TOP.cpu.sii_l2t1_req[17] ^ `TOP.cpu.sii_l2t1_req[18] ^ `TOP.cpu.sii_l2t1_req[19] ^ `TOP.cpu.sii_l2t1_req[20] ^ `TOP.cpu.sii_l2t1_req[21] ^ `TOP.cpu.sii_l2t1_req[22] ^ `TOP.cpu.sii_l2t1_req[23] ^ `TOP.cpu.sii_l2t1_req[24] ^ `TOP.cpu.sii_l2t1_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t1_req_vld,3))) && ($0in_delay(sii_l2t1_req[24] == 0,3)) && ($0in_delay(sii_l2t1_req[25] == 1,3)) && ($0in_delay(sii_l2t1_req[26] == 0,3)) && !(sii_wr8_ecc4_l1_cycle2 == sii_l2b1_ecc[4]))
      -clock l2clk
      -message "data ecc error for wr8 in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc4_l1_wr8_cycle2
*/

wire sii_wr8_ecc5_l1_cycle2 =  (`TOP.cpu.sii_l2t1_req[26] ^ `TOP.cpu.sii_l2t1_req[27] ^ `TOP.cpu.sii_l2t1_req[28] ^ `TOP.cpu.sii_l2t1_req[29] ^ `TOP.cpu.sii_l2t1_req[30] ^ `TOP.cpu.sii_l2t1_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t1_req_vld,3))) && ($0in_delay(sii_l2t1_req[24] == 0,3)) && ($0in_delay(sii_l2t1_req[25] == 1,3)) && ($0in_delay(sii_l2t1_req[26] == 0,3)) && !(sii_wr8_ecc5_l1_cycle2 == sii_l2b1_ecc[5]))
      -clock l2clk
      -message "data ecc error for wr8 in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc5_l1_wr8_cycle2
*/

wire sii_wr8_ecc6_l1_cycle2 =  (`TOP.cpu.sii_l2t1_req[0] ^ `TOP.cpu.sii_l2t1_req[1] ^ `TOP.cpu.sii_l2t1_req[2] ^ `TOP.cpu.sii_l2t1_req[4] ^ `TOP.cpu.sii_l2t1_req[5] ^ `TOP.cpu.sii_l2t1_req[7] ^ `TOP.cpu.sii_l2t1_req[10] ^ `TOP.cpu.sii_l2t1_req[11] ^ `TOP.cpu.sii_l2t1_req[12] ^ `TOP.cpu.sii_l2t1_req[14] ^ `TOP.cpu.sii_l2t1_req[17] ^ `TOP.cpu.sii_l2t1_req[18] ^ `TOP.cpu.sii_l2t1_req[21] ^ `TOP.cpu.sii_l2t1_req[23] ^ `TOP.cpu.sii_l2t1_req[24] ^ `TOP.cpu.sii_l2t1_req[26] ^ `TOP.cpu.sii_l2t1_req[27] ^ `TOP.cpu.sii_l2t1_req[29] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t1_req_vld,3))) && ($0in_delay(sii_l2t1_req[24] == 0,3)) && ($0in_delay(sii_l2t1_req[25] == 1,3)) && ($0in_delay(sii_l2t1_req[26] == 0,3)) && !(sii_wr8_ecc6_l1_cycle2 == sii_l2b1_ecc[6]))
      -clock l2clk
      -message "data ecc error for wr8 in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc6_l1_wr8_cycle2
*/

wire sii_wr8_ecc0_l2_cycle1 =  (`TOP.cpu.sii_l2t2_req[0] ^ `TOP.cpu.sii_l2t2_req[1] ^ `TOP.cpu.sii_l2t2_req[3] ^ `TOP.cpu.sii_l2t2_req[4] ^ `TOP.cpu.sii_l2t2_req[6] ^ `TOP.cpu.sii_l2t2_req[8] ^ `TOP.cpu.sii_l2t2_req[10] ^ `TOP.cpu.sii_l2t2_req[11] ^ `TOP.cpu.sii_l2t2_req[13] ^ `TOP.cpu.sii_l2t2_req[15] ^ `TOP.cpu.sii_l2t2_req[17] ^ `TOP.cpu.sii_l2t2_req[19] ^ `TOP.cpu.sii_l2t2_req[21] ^ `TOP.cpu.sii_l2t2_req[23] ^ `TOP.cpu.sii_l2t2_req[25] ^ `TOP.cpu.sii_l2t2_req[26] ^ `TOP.cpu.sii_l2t2_req[28] ^ `TOP.cpu.sii_l2t2_req[30] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t2_req_vld,2))) && ($0in_delay(sii_l2t2_req[24] == 0,2)) && ($0in_delay(sii_l2t2_req[25] == 1,2)) && ($0in_delay(sii_l2t2_req[26] == 0,2)) && !(sii_wr8_ecc0_l2_cycle1 == sii_l2b2_ecc[0]))
      -clock l2clk
      -message "data ecc error for wr8 in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc0_l2_wr8_cycle1
*/

wire sii_wr8_ecc1_l2_cycle1 =  (`TOP.cpu.sii_l2t2_req[0] ^ `TOP.cpu.sii_l2t2_req[2] ^ `TOP.cpu.sii_l2t2_req[3] ^ `TOP.cpu.sii_l2t2_req[5] ^ `TOP.cpu.sii_l2t2_req[6] ^ `TOP.cpu.sii_l2t2_req[9] ^ `TOP.cpu.sii_l2t2_req[10] ^ `TOP.cpu.sii_l2t2_req[12] ^ `TOP.cpu.sii_l2t2_req[13] ^ `TOP.cpu.sii_l2t2_req[16] ^ `TOP.cpu.sii_l2t2_req[17] ^ `TOP.cpu.sii_l2t2_req[20] ^ `TOP.cpu.sii_l2t2_req[21] ^ `TOP.cpu.sii_l2t2_req[24] ^ `TOP.cpu.sii_l2t2_req[25] ^ `TOP.cpu.sii_l2t2_req[27] ^ `TOP.cpu.sii_l2t2_req[28] ^ `TOP.cpu.sii_l2t2_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t2_req_vld,2))) && ($0in_delay(sii_l2t2_req[24] == 0,2)) && ($0in_delay(sii_l2t2_req[25] == 1,2)) && ($0in_delay(sii_l2t2_req[26] == 0,2)) && !(sii_wr8_ecc1_l2_cycle1 == sii_l2b2_ecc[1]))
      -clock l2clk
      -message "data ecc error for wr8 in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc1_l2_wr8_cycle1
*/

wire sii_wr8_ecc2_l2_cycle1 =  (`TOP.cpu.sii_l2t2_req[1] ^ `TOP.cpu.sii_l2t2_req[2] ^ `TOP.cpu.sii_l2t2_req[3] ^ `TOP.cpu.sii_l2t2_req[7] ^ `TOP.cpu.sii_l2t2_req[8] ^ `TOP.cpu.sii_l2t2_req[9] ^ `TOP.cpu.sii_l2t2_req[10] ^ `TOP.cpu.sii_l2t2_req[14] ^ `TOP.cpu.sii_l2t2_req[15] ^ `TOP.cpu.sii_l2t2_req[16] ^ `TOP.cpu.sii_l2t2_req[17] ^ `TOP.cpu.sii_l2t2_req[22] ^ `TOP.cpu.sii_l2t2_req[23] ^ `TOP.cpu.sii_l2t2_req[24] ^ `TOP.cpu.sii_l2t2_req[25] ^ `TOP.cpu.sii_l2t2_req[29] ^ `TOP.cpu.sii_l2t2_req[30] ^ `TOP.cpu.sii_l2t2_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t2_req_vld,2))) && ($0in_delay(sii_l2t2_req[24] == 0,2)) && ($0in_delay(sii_l2t2_req[25] == 1,2)) && ($0in_delay(sii_l2t2_req[26] == 0,2)) && !(sii_wr8_ecc2_l2_cycle1 == sii_l2b2_ecc[2]))
      -clock l2clk
      -message "data ecc error for wr8 in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc2_l2_wr8_cycle1
*/

wire sii_wr8_ecc3_l2_cycle1 =  (`TOP.cpu.sii_l2t2_req[4] ^ `TOP.cpu.sii_l2t2_req[5] ^ `TOP.cpu.sii_l2t2_req[6] ^ `TOP.cpu.sii_l2t2_req[7] ^ `TOP.cpu.sii_l2t2_req[8] ^ `TOP.cpu.sii_l2t2_req[9] ^ `TOP.cpu.sii_l2t2_req[10] ^ `TOP.cpu.sii_l2t2_req[18] ^ `TOP.cpu.sii_l2t2_req[19] ^ `TOP.cpu.sii_l2t2_req[20] ^ `TOP.cpu.sii_l2t2_req[21] ^ `TOP.cpu.sii_l2t2_req[22] ^ `TOP.cpu.sii_l2t2_req[23] ^ `TOP.cpu.sii_l2t2_req[24] ^ `TOP.cpu.sii_l2t2_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t2_req_vld,2))) && ($0in_delay(sii_l2t2_req[24] == 0,2)) && ($0in_delay(sii_l2t2_req[25] == 1,2)) && ($0in_delay(sii_l2t2_req[26] == 0,2)) && !(sii_wr8_ecc3_l2_cycle1 == sii_l2b2_ecc[3]))
      -clock l2clk
      -message "data ecc error for wr8 in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc3_l2_wr8_cycle1
*/

wire sii_wr8_ecc4_l2_cycle1 =  ( `TOP.cpu.sii_l2t2_req[11] ^ `TOP.cpu.sii_l2t2_req[12] ^ `TOP.cpu.sii_l2t2_req[13] ^ `TOP.cpu.sii_l2t2_req[14] ^ `TOP.cpu.sii_l2t2_req[15] ^ `TOP.cpu.sii_l2t2_req[16] ^ `TOP.cpu.sii_l2t2_req[17] ^ `TOP.cpu.sii_l2t2_req[18] ^ `TOP.cpu.sii_l2t2_req[19] ^ `TOP.cpu.sii_l2t2_req[20] ^ `TOP.cpu.sii_l2t2_req[21] ^ `TOP.cpu.sii_l2t2_req[22] ^ `TOP.cpu.sii_l2t2_req[23] ^ `TOP.cpu.sii_l2t2_req[24] ^ `TOP.cpu.sii_l2t2_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t2_req_vld,2))) && ($0in_delay(sii_l2t2_req[24] == 0,2)) && ($0in_delay(sii_l2t2_req[25] == 1,2)) && ($0in_delay(sii_l2t2_req[26] == 0,2)) && !(sii_wr8_ecc4_l2_cycle1 == sii_l2b2_ecc[4]))
      -clock l2clk
      -message "data ecc error for wr8 in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc4_l2_wr8_cycle1
*/

wire sii_wr8_ecc5_l2_cycle1 =  (`TOP.cpu.sii_l2t2_req[26] ^ `TOP.cpu.sii_l2t2_req[27] ^ `TOP.cpu.sii_l2t2_req[28] ^ `TOP.cpu.sii_l2t2_req[29] ^ `TOP.cpu.sii_l2t2_req[30] ^ `TOP.cpu.sii_l2t2_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t2_req_vld,2))) && ($0in_delay(sii_l2t2_req[24] == 0,2)) && ($0in_delay(sii_l2t2_req[25] == 1,2)) && ($0in_delay(sii_l2t2_req[26] == 0,2)) && !(sii_wr8_ecc5_l2_cycle1 == sii_l2b2_ecc[5]))
      -clock l2clk
      -message "data ecc error for wr8 in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc5_l2_wr8_cycle1
*/

wire sii_wr8_ecc6_l2_cycle1 =  (`TOP.cpu.sii_l2t2_req[0] ^ `TOP.cpu.sii_l2t2_req[1] ^ `TOP.cpu.sii_l2t2_req[2] ^ `TOP.cpu.sii_l2t2_req[4] ^ `TOP.cpu.sii_l2t2_req[5] ^ `TOP.cpu.sii_l2t2_req[7] ^ `TOP.cpu.sii_l2t2_req[10] ^ `TOP.cpu.sii_l2t2_req[11] ^ `TOP.cpu.sii_l2t2_req[12] ^ `TOP.cpu.sii_l2t2_req[14] ^ `TOP.cpu.sii_l2t2_req[17] ^ `TOP.cpu.sii_l2t2_req[18] ^ `TOP.cpu.sii_l2t2_req[21] ^ `TOP.cpu.sii_l2t2_req[23] ^ `TOP.cpu.sii_l2t2_req[24] ^ `TOP.cpu.sii_l2t2_req[26] ^ `TOP.cpu.sii_l2t2_req[27] ^ `TOP.cpu.sii_l2t2_req[29] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t2_req_vld,2))) && ($0in_delay(sii_l2t2_req[24] == 0,2)) && ($0in_delay(sii_l2t2_req[25] == 1,2)) && ($0in_delay(sii_l2t2_req[26] == 0,2)) && !(sii_wr8_ecc6_l2_cycle1 == sii_l2b2_ecc[6]))
      -clock l2clk
      -message "data ecc error for wr8 in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc6_l2_wr8_cycle1
*/

wire sii_wr8_ecc0_l2_cycle2 =  (`TOP.cpu.sii_l2t2_req[0] ^ `TOP.cpu.sii_l2t2_req[1] ^ `TOP.cpu.sii_l2t2_req[3] ^ `TOP.cpu.sii_l2t2_req[4] ^ `TOP.cpu.sii_l2t2_req[6] ^ `TOP.cpu.sii_l2t2_req[8] ^ `TOP.cpu.sii_l2t2_req[10] ^ `TOP.cpu.sii_l2t2_req[11] ^ `TOP.cpu.sii_l2t2_req[13] ^ `TOP.cpu.sii_l2t2_req[15] ^ `TOP.cpu.sii_l2t2_req[17] ^ `TOP.cpu.sii_l2t2_req[19] ^ `TOP.cpu.sii_l2t2_req[21] ^ `TOP.cpu.sii_l2t2_req[23] ^ `TOP.cpu.sii_l2t2_req[25] ^ `TOP.cpu.sii_l2t2_req[26] ^ `TOP.cpu.sii_l2t2_req[28] ^ `TOP.cpu.sii_l2t2_req[30] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t2_req_vld,3))) && ($0in_delay(sii_l2t2_req[24] == 0,3)) && ($0in_delay(sii_l2t2_req[25] == 1,3)) && ($0in_delay(sii_l2t2_req[26] == 0,3)) && !(sii_wr8_ecc0_l2_cycle2 == sii_l2b2_ecc[0]))
      -clock l2clk
      -message "data ecc error for wr8 in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc0_l2_wr8_cycle2
*/

wire sii_wr8_ecc1_l2_cycle2 =  (`TOP.cpu.sii_l2t2_req[0] ^ `TOP.cpu.sii_l2t2_req[2] ^ `TOP.cpu.sii_l2t2_req[3] ^ `TOP.cpu.sii_l2t2_req[5] ^ `TOP.cpu.sii_l2t2_req[6] ^ `TOP.cpu.sii_l2t2_req[9] ^ `TOP.cpu.sii_l2t2_req[10] ^ `TOP.cpu.sii_l2t2_req[12] ^ `TOP.cpu.sii_l2t2_req[13] ^ `TOP.cpu.sii_l2t2_req[16] ^ `TOP.cpu.sii_l2t2_req[17] ^ `TOP.cpu.sii_l2t2_req[20] ^ `TOP.cpu.sii_l2t2_req[21] ^ `TOP.cpu.sii_l2t2_req[24] ^ `TOP.cpu.sii_l2t2_req[25] ^ `TOP.cpu.sii_l2t2_req[27] ^ `TOP.cpu.sii_l2t2_req[28] ^ `TOP.cpu.sii_l2t2_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t2_req_vld,3))) && ($0in_delay(sii_l2t2_req[24] == 0,3)) && ($0in_delay(sii_l2t2_req[25] == 1,3)) && ($0in_delay(sii_l2t2_req[26] == 0,3)) && !(sii_wr8_ecc1_l2_cycle2 == sii_l2b2_ecc[1]))
      -clock l2clk
      -message "data ecc error for wr8 in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc1_l2_wr8_cycle2
*/

wire sii_wr8_ecc2_l2_cycle2 =  (`TOP.cpu.sii_l2t2_req[1] ^ `TOP.cpu.sii_l2t2_req[2] ^ `TOP.cpu.sii_l2t2_req[3] ^ `TOP.cpu.sii_l2t2_req[7] ^ `TOP.cpu.sii_l2t2_req[8] ^ `TOP.cpu.sii_l2t2_req[9] ^ `TOP.cpu.sii_l2t2_req[10] ^ `TOP.cpu.sii_l2t2_req[14] ^ `TOP.cpu.sii_l2t2_req[15] ^ `TOP.cpu.sii_l2t2_req[16] ^ `TOP.cpu.sii_l2t2_req[17] ^ `TOP.cpu.sii_l2t2_req[22] ^ `TOP.cpu.sii_l2t2_req[23] ^ `TOP.cpu.sii_l2t2_req[24] ^ `TOP.cpu.sii_l2t2_req[25] ^ `TOP.cpu.sii_l2t2_req[29] ^ `TOP.cpu.sii_l2t2_req[30] ^ `TOP.cpu.sii_l2t2_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t2_req_vld,3))) && ($0in_delay(sii_l2t2_req[24] == 0,3)) && ($0in_delay(sii_l2t2_req[25] == 1,3)) && ($0in_delay(sii_l2t2_req[26] == 0,3)) && !(sii_wr8_ecc2_l2_cycle2 == sii_l2b2_ecc[2]))
      -clock l2clk
      -message "data ecc error for wr8 in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc2_l2_wr8_cycle2
*/

wire sii_wr8_ecc3_l2_cycle2 =  (`TOP.cpu.sii_l2t2_req[4] ^ `TOP.cpu.sii_l2t2_req[5] ^ `TOP.cpu.sii_l2t2_req[6] ^ `TOP.cpu.sii_l2t2_req[7] ^ `TOP.cpu.sii_l2t2_req[8] ^ `TOP.cpu.sii_l2t2_req[9] ^ `TOP.cpu.sii_l2t2_req[10] ^ `TOP.cpu.sii_l2t2_req[18] ^ `TOP.cpu.sii_l2t2_req[19] ^ `TOP.cpu.sii_l2t2_req[20] ^ `TOP.cpu.sii_l2t2_req[21] ^ `TOP.cpu.sii_l2t2_req[22] ^ `TOP.cpu.sii_l2t2_req[23] ^ `TOP.cpu.sii_l2t2_req[24] ^ `TOP.cpu.sii_l2t2_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t2_req_vld,3))) && ($0in_delay(sii_l2t2_req[24] == 0,3)) && ($0in_delay(sii_l2t2_req[25] == 1,3)) && ($0in_delay(sii_l2t2_req[26] == 0,3)) && !(sii_wr8_ecc3_l2_cycle2 == sii_l2b2_ecc[3]))
      -clock l2clk
      -message "data ecc error for wr8 in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc3_l2_wr8_cycle2
*/

wire sii_wr8_ecc4_l2_cycle2 =  ( `TOP.cpu.sii_l2t2_req[11] ^ `TOP.cpu.sii_l2t2_req[12] ^ `TOP.cpu.sii_l2t2_req[13] ^ `TOP.cpu.sii_l2t2_req[14] ^ `TOP.cpu.sii_l2t2_req[15] ^ `TOP.cpu.sii_l2t2_req[16] ^ `TOP.cpu.sii_l2t2_req[17] ^ `TOP.cpu.sii_l2t2_req[18] ^ `TOP.cpu.sii_l2t2_req[19] ^ `TOP.cpu.sii_l2t2_req[20] ^ `TOP.cpu.sii_l2t2_req[21] ^ `TOP.cpu.sii_l2t2_req[22] ^ `TOP.cpu.sii_l2t2_req[23] ^ `TOP.cpu.sii_l2t2_req[24] ^ `TOP.cpu.sii_l2t2_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t2_req_vld,3))) && ($0in_delay(sii_l2t2_req[24] == 0,3)) && ($0in_delay(sii_l2t2_req[25] == 1,3)) && ($0in_delay(sii_l2t2_req[26] == 0,3)) && !(sii_wr8_ecc4_l2_cycle2 == sii_l2b2_ecc[4]))
      -clock l2clk
      -message "data ecc error for wr8 in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc4_l2_wr8_cycle2
*/

wire sii_wr8_ecc5_l2_cycle2 =  (`TOP.cpu.sii_l2t2_req[26] ^ `TOP.cpu.sii_l2t2_req[27] ^ `TOP.cpu.sii_l2t2_req[28] ^ `TOP.cpu.sii_l2t2_req[29] ^ `TOP.cpu.sii_l2t2_req[30] ^ `TOP.cpu.sii_l2t2_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t2_req_vld,3))) && ($0in_delay(sii_l2t2_req[24] == 0,3)) && ($0in_delay(sii_l2t2_req[25] == 1,3)) && ($0in_delay(sii_l2t2_req[26] == 0,3)) && !(sii_wr8_ecc5_l2_cycle2 == sii_l2b2_ecc[5]))
      -clock l2clk
      -message "data ecc error for wr8 in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc5_l2_wr8_cycle2
*/

wire sii_wr8_ecc6_l2_cycle2 =  (`TOP.cpu.sii_l2t2_req[0] ^ `TOP.cpu.sii_l2t2_req[1] ^ `TOP.cpu.sii_l2t2_req[2] ^ `TOP.cpu.sii_l2t2_req[4] ^ `TOP.cpu.sii_l2t2_req[5] ^ `TOP.cpu.sii_l2t2_req[7] ^ `TOP.cpu.sii_l2t2_req[10] ^ `TOP.cpu.sii_l2t2_req[11] ^ `TOP.cpu.sii_l2t2_req[12] ^ `TOP.cpu.sii_l2t2_req[14] ^ `TOP.cpu.sii_l2t2_req[17] ^ `TOP.cpu.sii_l2t2_req[18] ^ `TOP.cpu.sii_l2t2_req[21] ^ `TOP.cpu.sii_l2t2_req[23] ^ `TOP.cpu.sii_l2t2_req[24] ^ `TOP.cpu.sii_l2t2_req[26] ^ `TOP.cpu.sii_l2t2_req[27] ^ `TOP.cpu.sii_l2t2_req[29] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t2_req_vld,3))) && ($0in_delay(sii_l2t2_req[24] == 0,3)) && ($0in_delay(sii_l2t2_req[25] == 1,3)) && ($0in_delay(sii_l2t2_req[26] == 0,3)) && !(sii_wr8_ecc6_l2_cycle2 == sii_l2b2_ecc[6]))
      -clock l2clk
      -message "data ecc error for wr8 in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc6_l2_wr8_cycle2
*/

wire sii_wr8_ecc0_l3_cycle1 =  (`TOP.cpu.sii_l2t3_req[0] ^ `TOP.cpu.sii_l2t3_req[1] ^ `TOP.cpu.sii_l2t3_req[3] ^ `TOP.cpu.sii_l2t3_req[4] ^ `TOP.cpu.sii_l2t3_req[6] ^ `TOP.cpu.sii_l2t3_req[8] ^ `TOP.cpu.sii_l2t3_req[10] ^ `TOP.cpu.sii_l2t3_req[11] ^ `TOP.cpu.sii_l2t3_req[13] ^ `TOP.cpu.sii_l2t3_req[15] ^ `TOP.cpu.sii_l2t3_req[17] ^ `TOP.cpu.sii_l2t3_req[19] ^ `TOP.cpu.sii_l2t3_req[21] ^ `TOP.cpu.sii_l2t3_req[23] ^ `TOP.cpu.sii_l2t3_req[25] ^ `TOP.cpu.sii_l2t3_req[26] ^ `TOP.cpu.sii_l2t3_req[28] ^ `TOP.cpu.sii_l2t3_req[30] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t3_req_vld,2))) && ($0in_delay(sii_l2t3_req[24] == 0,2)) && ($0in_delay(sii_l2t3_req[25] == 1,2)) && ($0in_delay(sii_l2t3_req[26] == 0,2)) && !(sii_wr8_ecc0_l3_cycle1 == sii_l2b3_ecc[0]))
      -clock l2clk
      -message "data ecc error for wr8 in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc0_l3_wr8_cycle1
*/

wire sii_wr8_ecc1_l3_cycle1 =  (`TOP.cpu.sii_l2t3_req[0] ^ `TOP.cpu.sii_l2t3_req[2] ^ `TOP.cpu.sii_l2t3_req[3] ^ `TOP.cpu.sii_l2t3_req[5] ^ `TOP.cpu.sii_l2t3_req[6] ^ `TOP.cpu.sii_l2t3_req[9] ^ `TOP.cpu.sii_l2t3_req[10] ^ `TOP.cpu.sii_l2t3_req[12] ^ `TOP.cpu.sii_l2t3_req[13] ^ `TOP.cpu.sii_l2t3_req[16] ^ `TOP.cpu.sii_l2t3_req[17] ^ `TOP.cpu.sii_l2t3_req[20] ^ `TOP.cpu.sii_l2t3_req[21] ^ `TOP.cpu.sii_l2t3_req[24] ^ `TOP.cpu.sii_l2t3_req[25] ^ `TOP.cpu.sii_l2t3_req[27] ^ `TOP.cpu.sii_l2t3_req[28] ^ `TOP.cpu.sii_l2t3_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t3_req_vld,2))) && ($0in_delay(sii_l2t3_req[24] == 0,2)) && ($0in_delay(sii_l2t3_req[25] == 1,2)) && ($0in_delay(sii_l2t3_req[26] == 0,2)) && !(sii_wr8_ecc1_l3_cycle1 == sii_l2b3_ecc[1]))
      -clock l2clk
      -message "data ecc error for wr8 in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc1_l3_wr8_cycle1
*/

wire sii_wr8_ecc2_l3_cycle1 =  (`TOP.cpu.sii_l2t3_req[1] ^ `TOP.cpu.sii_l2t3_req[2] ^ `TOP.cpu.sii_l2t3_req[3] ^ `TOP.cpu.sii_l2t3_req[7] ^ `TOP.cpu.sii_l2t3_req[8] ^ `TOP.cpu.sii_l2t3_req[9] ^ `TOP.cpu.sii_l2t3_req[10] ^ `TOP.cpu.sii_l2t3_req[14] ^ `TOP.cpu.sii_l2t3_req[15] ^ `TOP.cpu.sii_l2t3_req[16] ^ `TOP.cpu.sii_l2t3_req[17] ^ `TOP.cpu.sii_l2t3_req[22] ^ `TOP.cpu.sii_l2t3_req[23] ^ `TOP.cpu.sii_l2t3_req[24] ^ `TOP.cpu.sii_l2t3_req[25] ^ `TOP.cpu.sii_l2t3_req[29] ^ `TOP.cpu.sii_l2t3_req[30] ^ `TOP.cpu.sii_l2t3_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t3_req_vld,2))) && ($0in_delay(sii_l2t3_req[24] == 0,2)) && ($0in_delay(sii_l2t3_req[25] == 1,2)) && ($0in_delay(sii_l2t3_req[26] == 0,2)) && !(sii_wr8_ecc2_l3_cycle1 == sii_l2b3_ecc[2]))
      -clock l2clk
      -message "data ecc error for wr8 in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc2_l3_wr8_cycle1
*/

wire sii_wr8_ecc3_l3_cycle1 =  (`TOP.cpu.sii_l2t3_req[4] ^ `TOP.cpu.sii_l2t3_req[5] ^ `TOP.cpu.sii_l2t3_req[6] ^ `TOP.cpu.sii_l2t3_req[7] ^ `TOP.cpu.sii_l2t3_req[8] ^ `TOP.cpu.sii_l2t3_req[9] ^ `TOP.cpu.sii_l2t3_req[10] ^ `TOP.cpu.sii_l2t3_req[18] ^ `TOP.cpu.sii_l2t3_req[19] ^ `TOP.cpu.sii_l2t3_req[20] ^ `TOP.cpu.sii_l2t3_req[21] ^ `TOP.cpu.sii_l2t3_req[22] ^ `TOP.cpu.sii_l2t3_req[23] ^ `TOP.cpu.sii_l2t3_req[24] ^ `TOP.cpu.sii_l2t3_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t3_req_vld,2))) && ($0in_delay(sii_l2t3_req[24] == 0,2)) && ($0in_delay(sii_l2t3_req[25] == 1,2)) && ($0in_delay(sii_l2t3_req[26] == 0,2)) && !(sii_wr8_ecc3_l3_cycle1 == sii_l2b3_ecc[3]))
      -clock l2clk
      -message "data ecc error for wr8 in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc3_l3_wr8_cycle1
*/

wire sii_wr8_ecc4_l3_cycle1 =  ( `TOP.cpu.sii_l2t3_req[11] ^ `TOP.cpu.sii_l2t3_req[12] ^ `TOP.cpu.sii_l2t3_req[13] ^ `TOP.cpu.sii_l2t3_req[14] ^ `TOP.cpu.sii_l2t3_req[15] ^ `TOP.cpu.sii_l2t3_req[16] ^ `TOP.cpu.sii_l2t3_req[17] ^ `TOP.cpu.sii_l2t3_req[18] ^ `TOP.cpu.sii_l2t3_req[19] ^ `TOP.cpu.sii_l2t3_req[20] ^ `TOP.cpu.sii_l2t3_req[21] ^ `TOP.cpu.sii_l2t3_req[22] ^ `TOP.cpu.sii_l2t3_req[23] ^ `TOP.cpu.sii_l2t3_req[24] ^ `TOP.cpu.sii_l2t3_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t3_req_vld,2))) && ($0in_delay(sii_l2t3_req[24] == 0,2)) && ($0in_delay(sii_l2t3_req[25] == 1,2)) && ($0in_delay(sii_l2t3_req[26] == 0,2)) && !(sii_wr8_ecc4_l3_cycle1 == sii_l2b3_ecc[4]))
      -clock l2clk
      -message "data ecc error for wr8 in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc4_l3_wr8_cycle1
*/

wire sii_wr8_ecc5_l3_cycle1 =  (`TOP.cpu.sii_l2t3_req[26] ^ `TOP.cpu.sii_l2t3_req[27] ^ `TOP.cpu.sii_l2t3_req[28] ^ `TOP.cpu.sii_l2t3_req[29] ^ `TOP.cpu.sii_l2t3_req[30] ^ `TOP.cpu.sii_l2t3_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t3_req_vld,2))) && ($0in_delay(sii_l2t3_req[24] == 0,2)) && ($0in_delay(sii_l2t3_req[25] == 1,2)) && ($0in_delay(sii_l2t3_req[26] == 0,2)) && !(sii_wr8_ecc5_l3_cycle1 == sii_l2b3_ecc[5]))
      -clock l2clk
      -message "data ecc error for wr8 in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc5_l3_wr8_cycle1
*/

wire sii_wr8_ecc6_l3_cycle1 =  (`TOP.cpu.sii_l2t3_req[0] ^ `TOP.cpu.sii_l2t3_req[1] ^ `TOP.cpu.sii_l2t3_req[2] ^ `TOP.cpu.sii_l2t3_req[4] ^ `TOP.cpu.sii_l2t3_req[5] ^ `TOP.cpu.sii_l2t3_req[7] ^ `TOP.cpu.sii_l2t3_req[10] ^ `TOP.cpu.sii_l2t3_req[11] ^ `TOP.cpu.sii_l2t3_req[12] ^ `TOP.cpu.sii_l2t3_req[14] ^ `TOP.cpu.sii_l2t3_req[17] ^ `TOP.cpu.sii_l2t3_req[18] ^ `TOP.cpu.sii_l2t3_req[21] ^ `TOP.cpu.sii_l2t3_req[23] ^ `TOP.cpu.sii_l2t3_req[24] ^ `TOP.cpu.sii_l2t3_req[26] ^ `TOP.cpu.sii_l2t3_req[27] ^ `TOP.cpu.sii_l2t3_req[29] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t3_req_vld,2))) && ($0in_delay(sii_l2t3_req[24] == 0,2)) && ($0in_delay(sii_l2t3_req[25] == 1,2)) && ($0in_delay(sii_l2t3_req[26] == 0,2)) && !(sii_wr8_ecc6_l3_cycle1 == sii_l2b3_ecc[6]))
      -clock l2clk
      -message "data ecc error for wr8 in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc6_l3_wr8_cycle1
*/

wire sii_wr8_ecc0_l3_cycle2 =  (`TOP.cpu.sii_l2t3_req[0] ^ `TOP.cpu.sii_l2t3_req[1] ^ `TOP.cpu.sii_l2t3_req[3] ^ `TOP.cpu.sii_l2t3_req[4] ^ `TOP.cpu.sii_l2t3_req[6] ^ `TOP.cpu.sii_l2t3_req[8] ^ `TOP.cpu.sii_l2t3_req[10] ^ `TOP.cpu.sii_l2t3_req[11] ^ `TOP.cpu.sii_l2t3_req[13] ^ `TOP.cpu.sii_l2t3_req[15] ^ `TOP.cpu.sii_l2t3_req[17] ^ `TOP.cpu.sii_l2t3_req[19] ^ `TOP.cpu.sii_l2t3_req[21] ^ `TOP.cpu.sii_l2t3_req[23] ^ `TOP.cpu.sii_l2t3_req[25] ^ `TOP.cpu.sii_l2t3_req[26] ^ `TOP.cpu.sii_l2t3_req[28] ^ `TOP.cpu.sii_l2t3_req[30] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t3_req_vld,3))) && ($0in_delay(sii_l2t3_req[24] == 0,3)) && ($0in_delay(sii_l2t3_req[25] == 1,3)) && ($0in_delay(sii_l2t3_req[26] == 0,3)) && !(sii_wr8_ecc0_l3_cycle2 == sii_l2b3_ecc[0]))
      -clock l2clk
      -message "data ecc error for wr8 in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc0_l3_wr8_cycle2
*/

wire sii_wr8_ecc1_l3_cycle2 =  (`TOP.cpu.sii_l2t3_req[0] ^ `TOP.cpu.sii_l2t3_req[2] ^ `TOP.cpu.sii_l2t3_req[3] ^ `TOP.cpu.sii_l2t3_req[5] ^ `TOP.cpu.sii_l2t3_req[6] ^ `TOP.cpu.sii_l2t3_req[9] ^ `TOP.cpu.sii_l2t3_req[10] ^ `TOP.cpu.sii_l2t3_req[12] ^ `TOP.cpu.sii_l2t3_req[13] ^ `TOP.cpu.sii_l2t3_req[16] ^ `TOP.cpu.sii_l2t3_req[17] ^ `TOP.cpu.sii_l2t3_req[20] ^ `TOP.cpu.sii_l2t3_req[21] ^ `TOP.cpu.sii_l2t3_req[24] ^ `TOP.cpu.sii_l2t3_req[25] ^ `TOP.cpu.sii_l2t3_req[27] ^ `TOP.cpu.sii_l2t3_req[28] ^ `TOP.cpu.sii_l2t3_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t3_req_vld,3))) && ($0in_delay(sii_l2t3_req[24] == 0,3)) && ($0in_delay(sii_l2t3_req[25] == 1,3)) && ($0in_delay(sii_l2t3_req[26] == 0,3)) && !(sii_wr8_ecc1_l3_cycle2 == sii_l2b3_ecc[1]))
      -clock l2clk
      -message "data ecc error for wr8 in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc1_l3_wr8_cycle2
*/

wire sii_wr8_ecc2_l3_cycle2 =  (`TOP.cpu.sii_l2t3_req[1] ^ `TOP.cpu.sii_l2t3_req[2] ^ `TOP.cpu.sii_l2t3_req[3] ^ `TOP.cpu.sii_l2t3_req[7] ^ `TOP.cpu.sii_l2t3_req[8] ^ `TOP.cpu.sii_l2t3_req[9] ^ `TOP.cpu.sii_l2t3_req[10] ^ `TOP.cpu.sii_l2t3_req[14] ^ `TOP.cpu.sii_l2t3_req[15] ^ `TOP.cpu.sii_l2t3_req[16] ^ `TOP.cpu.sii_l2t3_req[17] ^ `TOP.cpu.sii_l2t3_req[22] ^ `TOP.cpu.sii_l2t3_req[23] ^ `TOP.cpu.sii_l2t3_req[24] ^ `TOP.cpu.sii_l2t3_req[25] ^ `TOP.cpu.sii_l2t3_req[29] ^ `TOP.cpu.sii_l2t3_req[30] ^ `TOP.cpu.sii_l2t3_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t3_req_vld,3))) && ($0in_delay(sii_l2t3_req[24] == 0,3)) && ($0in_delay(sii_l2t3_req[25] == 1,3)) && ($0in_delay(sii_l2t3_req[26] == 0,3)) && !(sii_wr8_ecc2_l3_cycle2 == sii_l2b3_ecc[2]))
      -clock l2clk
      -message "data ecc error for wr8 in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc2_l3_wr8_cycle2
*/

wire sii_wr8_ecc3_l3_cycle2 =  (`TOP.cpu.sii_l2t3_req[4] ^ `TOP.cpu.sii_l2t3_req[5] ^ `TOP.cpu.sii_l2t3_req[6] ^ `TOP.cpu.sii_l2t3_req[7] ^ `TOP.cpu.sii_l2t3_req[8] ^ `TOP.cpu.sii_l2t3_req[9] ^ `TOP.cpu.sii_l2t3_req[10] ^ `TOP.cpu.sii_l2t3_req[18] ^ `TOP.cpu.sii_l2t3_req[19] ^ `TOP.cpu.sii_l2t3_req[20] ^ `TOP.cpu.sii_l2t3_req[21] ^ `TOP.cpu.sii_l2t3_req[22] ^ `TOP.cpu.sii_l2t3_req[23] ^ `TOP.cpu.sii_l2t3_req[24] ^ `TOP.cpu.sii_l2t3_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t3_req_vld,3))) && ($0in_delay(sii_l2t3_req[24] == 0,3)) && ($0in_delay(sii_l2t3_req[25] == 1,3)) && ($0in_delay(sii_l2t3_req[26] == 0,3)) && !(sii_wr8_ecc3_l3_cycle2 == sii_l2b3_ecc[3]))
      -clock l2clk
      -message "data ecc error for wr8 in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc3_l3_wr8_cycle2
*/

wire sii_wr8_ecc4_l3_cycle2 =  ( `TOP.cpu.sii_l2t3_req[11] ^ `TOP.cpu.sii_l2t3_req[12] ^ `TOP.cpu.sii_l2t3_req[13] ^ `TOP.cpu.sii_l2t3_req[14] ^ `TOP.cpu.sii_l2t3_req[15] ^ `TOP.cpu.sii_l2t3_req[16] ^ `TOP.cpu.sii_l2t3_req[17] ^ `TOP.cpu.sii_l2t3_req[18] ^ `TOP.cpu.sii_l2t3_req[19] ^ `TOP.cpu.sii_l2t3_req[20] ^ `TOP.cpu.sii_l2t3_req[21] ^ `TOP.cpu.sii_l2t3_req[22] ^ `TOP.cpu.sii_l2t3_req[23] ^ `TOP.cpu.sii_l2t3_req[24] ^ `TOP.cpu.sii_l2t3_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t3_req_vld,3))) && ($0in_delay(sii_l2t3_req[24] == 0,3)) && ($0in_delay(sii_l2t3_req[25] == 1,3)) && ($0in_delay(sii_l2t3_req[26] == 0,3)) && !(sii_wr8_ecc4_l3_cycle2 == sii_l2b3_ecc[4]))
      -clock l2clk
      -message "data ecc error for wr8 in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc4_l3_wr8_cycle2
*/

wire sii_wr8_ecc5_l3_cycle2 =  (`TOP.cpu.sii_l2t3_req[26] ^ `TOP.cpu.sii_l2t3_req[27] ^ `TOP.cpu.sii_l2t3_req[28] ^ `TOP.cpu.sii_l2t3_req[29] ^ `TOP.cpu.sii_l2t3_req[30] ^ `TOP.cpu.sii_l2t3_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t3_req_vld,3))) && ($0in_delay(sii_l2t3_req[24] == 0,3)) && ($0in_delay(sii_l2t3_req[25] == 1,3)) && ($0in_delay(sii_l2t3_req[26] == 0,3)) && !(sii_wr8_ecc5_l3_cycle2 == sii_l2b3_ecc[5]))
      -clock l2clk
      -message "data ecc error for wr8 in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc5_l3_wr8_cycle2
*/

wire sii_wr8_ecc6_l3_cycle2 =  (`TOP.cpu.sii_l2t3_req[0] ^ `TOP.cpu.sii_l2t3_req[1] ^ `TOP.cpu.sii_l2t3_req[2] ^ `TOP.cpu.sii_l2t3_req[4] ^ `TOP.cpu.sii_l2t3_req[5] ^ `TOP.cpu.sii_l2t3_req[7] ^ `TOP.cpu.sii_l2t3_req[10] ^ `TOP.cpu.sii_l2t3_req[11] ^ `TOP.cpu.sii_l2t3_req[12] ^ `TOP.cpu.sii_l2t3_req[14] ^ `TOP.cpu.sii_l2t3_req[17] ^ `TOP.cpu.sii_l2t3_req[18] ^ `TOP.cpu.sii_l2t3_req[21] ^ `TOP.cpu.sii_l2t3_req[23] ^ `TOP.cpu.sii_l2t3_req[24] ^ `TOP.cpu.sii_l2t3_req[26] ^ `TOP.cpu.sii_l2t3_req[27] ^ `TOP.cpu.sii_l2t3_req[29] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t3_req_vld,3))) && ($0in_delay(sii_l2t3_req[24] == 0,3)) && ($0in_delay(sii_l2t3_req[25] == 1,3)) && ($0in_delay(sii_l2t3_req[26] == 0,3)) && !(sii_wr8_ecc6_l3_cycle2 == sii_l2b3_ecc[6]))
      -clock l2clk
      -message "data ecc error for wr8 in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc6_l3_wr8_cycle2
*/

wire sii_wr8_ecc0_l4_cycle1 =  (`TOP.cpu.sii_l2t4_req[0] ^ `TOP.cpu.sii_l2t4_req[1] ^ `TOP.cpu.sii_l2t4_req[3] ^ `TOP.cpu.sii_l2t4_req[4] ^ `TOP.cpu.sii_l2t4_req[6] ^ `TOP.cpu.sii_l2t4_req[8] ^ `TOP.cpu.sii_l2t4_req[10] ^ `TOP.cpu.sii_l2t4_req[11] ^ `TOP.cpu.sii_l2t4_req[13] ^ `TOP.cpu.sii_l2t4_req[15] ^ `TOP.cpu.sii_l2t4_req[17] ^ `TOP.cpu.sii_l2t4_req[19] ^ `TOP.cpu.sii_l2t4_req[21] ^ `TOP.cpu.sii_l2t4_req[23] ^ `TOP.cpu.sii_l2t4_req[25] ^ `TOP.cpu.sii_l2t4_req[26] ^ `TOP.cpu.sii_l2t4_req[28] ^ `TOP.cpu.sii_l2t4_req[30] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t4_req_vld,2))) && ($0in_delay(sii_l2t4_req[24] == 0,2)) && ($0in_delay(sii_l2t4_req[25] == 1,2)) && ($0in_delay(sii_l2t4_req[26] == 0,2)) && !(sii_wr8_ecc0_l4_cycle1 == sii_l2b4_ecc[0]))
      -clock l2clk
      -message "data ecc error for wr8 in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc0_l4_wr8_cycle1
*/

wire sii_wr8_ecc1_l4_cycle1 =  (`TOP.cpu.sii_l2t4_req[0] ^ `TOP.cpu.sii_l2t4_req[2] ^ `TOP.cpu.sii_l2t4_req[3] ^ `TOP.cpu.sii_l2t4_req[5] ^ `TOP.cpu.sii_l2t4_req[6] ^ `TOP.cpu.sii_l2t4_req[9] ^ `TOP.cpu.sii_l2t4_req[10] ^ `TOP.cpu.sii_l2t4_req[12] ^ `TOP.cpu.sii_l2t4_req[13] ^ `TOP.cpu.sii_l2t4_req[16] ^ `TOP.cpu.sii_l2t4_req[17] ^ `TOP.cpu.sii_l2t4_req[20] ^ `TOP.cpu.sii_l2t4_req[21] ^ `TOP.cpu.sii_l2t4_req[24] ^ `TOP.cpu.sii_l2t4_req[25] ^ `TOP.cpu.sii_l2t4_req[27] ^ `TOP.cpu.sii_l2t4_req[28] ^ `TOP.cpu.sii_l2t4_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t4_req_vld,2))) && ($0in_delay(sii_l2t4_req[24] == 0,2)) && ($0in_delay(sii_l2t4_req[25] == 1,2)) && ($0in_delay(sii_l2t4_req[26] == 0,2)) && !(sii_wr8_ecc1_l4_cycle1 == sii_l2b4_ecc[1]))
      -clock l2clk
      -message "data ecc error for wr8 in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc1_l4_wr8_cycle1
*/

wire sii_wr8_ecc2_l4_cycle1 =  (`TOP.cpu.sii_l2t4_req[1] ^ `TOP.cpu.sii_l2t4_req[2] ^ `TOP.cpu.sii_l2t4_req[3] ^ `TOP.cpu.sii_l2t4_req[7] ^ `TOP.cpu.sii_l2t4_req[8] ^ `TOP.cpu.sii_l2t4_req[9] ^ `TOP.cpu.sii_l2t4_req[10] ^ `TOP.cpu.sii_l2t4_req[14] ^ `TOP.cpu.sii_l2t4_req[15] ^ `TOP.cpu.sii_l2t4_req[16] ^ `TOP.cpu.sii_l2t4_req[17] ^ `TOP.cpu.sii_l2t4_req[22] ^ `TOP.cpu.sii_l2t4_req[23] ^ `TOP.cpu.sii_l2t4_req[24] ^ `TOP.cpu.sii_l2t4_req[25] ^ `TOP.cpu.sii_l2t4_req[29] ^ `TOP.cpu.sii_l2t4_req[30] ^ `TOP.cpu.sii_l2t4_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t4_req_vld,2))) && ($0in_delay(sii_l2t4_req[24] == 0,2)) && ($0in_delay(sii_l2t4_req[25] == 1,2)) && ($0in_delay(sii_l2t4_req[26] == 0,2)) && !(sii_wr8_ecc2_l4_cycle1 == sii_l2b4_ecc[2]))
      -clock l2clk
      -message "data ecc error for wr8 in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc2_l4_wr8_cycle1
*/

wire sii_wr8_ecc3_l4_cycle1 =  (`TOP.cpu.sii_l2t4_req[4] ^ `TOP.cpu.sii_l2t4_req[5] ^ `TOP.cpu.sii_l2t4_req[6] ^ `TOP.cpu.sii_l2t4_req[7] ^ `TOP.cpu.sii_l2t4_req[8] ^ `TOP.cpu.sii_l2t4_req[9] ^ `TOP.cpu.sii_l2t4_req[10] ^ `TOP.cpu.sii_l2t4_req[18] ^ `TOP.cpu.sii_l2t4_req[19] ^ `TOP.cpu.sii_l2t4_req[20] ^ `TOP.cpu.sii_l2t4_req[21] ^ `TOP.cpu.sii_l2t4_req[22] ^ `TOP.cpu.sii_l2t4_req[23] ^ `TOP.cpu.sii_l2t4_req[24] ^ `TOP.cpu.sii_l2t4_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t4_req_vld,2))) && ($0in_delay(sii_l2t4_req[24] == 0,2)) && ($0in_delay(sii_l2t4_req[25] == 1,2)) && ($0in_delay(sii_l2t4_req[26] == 0,2)) && !(sii_wr8_ecc3_l4_cycle1 == sii_l2b4_ecc[3]))
      -clock l2clk
      -message "data ecc error for wr8 in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc3_l4_wr8_cycle1
*/

wire sii_wr8_ecc4_l4_cycle1 =  ( `TOP.cpu.sii_l2t4_req[11] ^ `TOP.cpu.sii_l2t4_req[12] ^ `TOP.cpu.sii_l2t4_req[13] ^ `TOP.cpu.sii_l2t4_req[14] ^ `TOP.cpu.sii_l2t4_req[15] ^ `TOP.cpu.sii_l2t4_req[16] ^ `TOP.cpu.sii_l2t4_req[17] ^ `TOP.cpu.sii_l2t4_req[18] ^ `TOP.cpu.sii_l2t4_req[19] ^ `TOP.cpu.sii_l2t4_req[20] ^ `TOP.cpu.sii_l2t4_req[21] ^ `TOP.cpu.sii_l2t4_req[22] ^ `TOP.cpu.sii_l2t4_req[23] ^ `TOP.cpu.sii_l2t4_req[24] ^ `TOP.cpu.sii_l2t4_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t4_req_vld,2))) && ($0in_delay(sii_l2t4_req[24] == 0,2)) && ($0in_delay(sii_l2t4_req[25] == 1,2)) && ($0in_delay(sii_l2t4_req[26] == 0,2)) && !(sii_wr8_ecc4_l4_cycle1 == sii_l2b4_ecc[4]))
      -clock l2clk
      -message "data ecc error for wr8 in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc4_l4_wr8_cycle1
*/

wire sii_wr8_ecc5_l4_cycle1 =  (`TOP.cpu.sii_l2t4_req[26] ^ `TOP.cpu.sii_l2t4_req[27] ^ `TOP.cpu.sii_l2t4_req[28] ^ `TOP.cpu.sii_l2t4_req[29] ^ `TOP.cpu.sii_l2t4_req[30] ^ `TOP.cpu.sii_l2t4_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t4_req_vld,2))) && ($0in_delay(sii_l2t4_req[24] == 0,2)) && ($0in_delay(sii_l2t4_req[25] == 1,2)) && ($0in_delay(sii_l2t4_req[26] == 0,2)) && !(sii_wr8_ecc5_l4_cycle1 == sii_l2b4_ecc[5]))
      -clock l2clk
      -message "data ecc error for wr8 in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc5_l4_wr8_cycle1
*/

wire sii_wr8_ecc6_l4_cycle1 =  (`TOP.cpu.sii_l2t4_req[0] ^ `TOP.cpu.sii_l2t4_req[1] ^ `TOP.cpu.sii_l2t4_req[2] ^ `TOP.cpu.sii_l2t4_req[4] ^ `TOP.cpu.sii_l2t4_req[5] ^ `TOP.cpu.sii_l2t4_req[7] ^ `TOP.cpu.sii_l2t4_req[10] ^ `TOP.cpu.sii_l2t4_req[11] ^ `TOP.cpu.sii_l2t4_req[12] ^ `TOP.cpu.sii_l2t4_req[14] ^ `TOP.cpu.sii_l2t4_req[17] ^ `TOP.cpu.sii_l2t4_req[18] ^ `TOP.cpu.sii_l2t4_req[21] ^ `TOP.cpu.sii_l2t4_req[23] ^ `TOP.cpu.sii_l2t4_req[24] ^ `TOP.cpu.sii_l2t4_req[26] ^ `TOP.cpu.sii_l2t4_req[27] ^ `TOP.cpu.sii_l2t4_req[29] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t4_req_vld,2))) && ($0in_delay(sii_l2t4_req[24] == 0,2)) && ($0in_delay(sii_l2t4_req[25] == 1,2)) && ($0in_delay(sii_l2t4_req[26] == 0,2)) && !(sii_wr8_ecc6_l4_cycle1 == sii_l2b4_ecc[6]))
      -clock l2clk
      -message "data ecc error for wr8 in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc6_l4_wr8_cycle1
*/

wire sii_wr8_ecc0_l4_cycle2 =  (`TOP.cpu.sii_l2t4_req[0] ^ `TOP.cpu.sii_l2t4_req[1] ^ `TOP.cpu.sii_l2t4_req[3] ^ `TOP.cpu.sii_l2t4_req[4] ^ `TOP.cpu.sii_l2t4_req[6] ^ `TOP.cpu.sii_l2t4_req[8] ^ `TOP.cpu.sii_l2t4_req[10] ^ `TOP.cpu.sii_l2t4_req[11] ^ `TOP.cpu.sii_l2t4_req[13] ^ `TOP.cpu.sii_l2t4_req[15] ^ `TOP.cpu.sii_l2t4_req[17] ^ `TOP.cpu.sii_l2t4_req[19] ^ `TOP.cpu.sii_l2t4_req[21] ^ `TOP.cpu.sii_l2t4_req[23] ^ `TOP.cpu.sii_l2t4_req[25] ^ `TOP.cpu.sii_l2t4_req[26] ^ `TOP.cpu.sii_l2t4_req[28] ^ `TOP.cpu.sii_l2t4_req[30] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t4_req_vld,3))) && ($0in_delay(sii_l2t4_req[24] == 0,3)) && ($0in_delay(sii_l2t4_req[25] == 1,3)) && ($0in_delay(sii_l2t4_req[26] == 0,3)) && !(sii_wr8_ecc0_l4_cycle2 == sii_l2b4_ecc[0]))
      -clock l2clk
      -message "data ecc error for wr8 in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc0_l4_wr8_cycle2
*/

wire sii_wr8_ecc1_l4_cycle2 =  (`TOP.cpu.sii_l2t4_req[0] ^ `TOP.cpu.sii_l2t4_req[2] ^ `TOP.cpu.sii_l2t4_req[3] ^ `TOP.cpu.sii_l2t4_req[5] ^ `TOP.cpu.sii_l2t4_req[6] ^ `TOP.cpu.sii_l2t4_req[9] ^ `TOP.cpu.sii_l2t4_req[10] ^ `TOP.cpu.sii_l2t4_req[12] ^ `TOP.cpu.sii_l2t4_req[13] ^ `TOP.cpu.sii_l2t4_req[16] ^ `TOP.cpu.sii_l2t4_req[17] ^ `TOP.cpu.sii_l2t4_req[20] ^ `TOP.cpu.sii_l2t4_req[21] ^ `TOP.cpu.sii_l2t4_req[24] ^ `TOP.cpu.sii_l2t4_req[25] ^ `TOP.cpu.sii_l2t4_req[27] ^ `TOP.cpu.sii_l2t4_req[28] ^ `TOP.cpu.sii_l2t4_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t4_req_vld,3))) && ($0in_delay(sii_l2t4_req[24] == 0,3)) && ($0in_delay(sii_l2t4_req[25] == 1,3)) && ($0in_delay(sii_l2t4_req[26] == 0,3)) && !(sii_wr8_ecc1_l4_cycle2 == sii_l2b4_ecc[1]))
      -clock l2clk
      -message "data ecc error for wr8 in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc1_l4_wr8_cycle2
*/

wire sii_wr8_ecc2_l4_cycle2 =  (`TOP.cpu.sii_l2t4_req[1] ^ `TOP.cpu.sii_l2t4_req[2] ^ `TOP.cpu.sii_l2t4_req[3] ^ `TOP.cpu.sii_l2t4_req[7] ^ `TOP.cpu.sii_l2t4_req[8] ^ `TOP.cpu.sii_l2t4_req[9] ^ `TOP.cpu.sii_l2t4_req[10] ^ `TOP.cpu.sii_l2t4_req[14] ^ `TOP.cpu.sii_l2t4_req[15] ^ `TOP.cpu.sii_l2t4_req[16] ^ `TOP.cpu.sii_l2t4_req[17] ^ `TOP.cpu.sii_l2t4_req[22] ^ `TOP.cpu.sii_l2t4_req[23] ^ `TOP.cpu.sii_l2t4_req[24] ^ `TOP.cpu.sii_l2t4_req[25] ^ `TOP.cpu.sii_l2t4_req[29] ^ `TOP.cpu.sii_l2t4_req[30] ^ `TOP.cpu.sii_l2t4_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t4_req_vld,3))) && ($0in_delay(sii_l2t4_req[24] == 0,3)) && ($0in_delay(sii_l2t4_req[25] == 1,3)) && ($0in_delay(sii_l2t4_req[26] == 0,3)) && !(sii_wr8_ecc2_l4_cycle2 == sii_l2b4_ecc[2]))
      -clock l2clk
      -message "data ecc error for wr8 in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc2_l4_wr8_cycle2
*/

wire sii_wr8_ecc3_l4_cycle2 =  (`TOP.cpu.sii_l2t4_req[4] ^ `TOP.cpu.sii_l2t4_req[5] ^ `TOP.cpu.sii_l2t4_req[6] ^ `TOP.cpu.sii_l2t4_req[7] ^ `TOP.cpu.sii_l2t4_req[8] ^ `TOP.cpu.sii_l2t4_req[9] ^ `TOP.cpu.sii_l2t4_req[10] ^ `TOP.cpu.sii_l2t4_req[18] ^ `TOP.cpu.sii_l2t4_req[19] ^ `TOP.cpu.sii_l2t4_req[20] ^ `TOP.cpu.sii_l2t4_req[21] ^ `TOP.cpu.sii_l2t4_req[22] ^ `TOP.cpu.sii_l2t4_req[23] ^ `TOP.cpu.sii_l2t4_req[24] ^ `TOP.cpu.sii_l2t4_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t4_req_vld,3))) && ($0in_delay(sii_l2t4_req[24] == 0,3)) && ($0in_delay(sii_l2t4_req[25] == 1,3)) && ($0in_delay(sii_l2t4_req[26] == 0,3)) && !(sii_wr8_ecc3_l4_cycle2 == sii_l2b4_ecc[3]))
      -clock l2clk
      -message "data ecc error for wr8 in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc3_l4_wr8_cycle2
*/

wire sii_wr8_ecc4_l4_cycle2 =  ( `TOP.cpu.sii_l2t4_req[11] ^ `TOP.cpu.sii_l2t4_req[12] ^ `TOP.cpu.sii_l2t4_req[13] ^ `TOP.cpu.sii_l2t4_req[14] ^ `TOP.cpu.sii_l2t4_req[15] ^ `TOP.cpu.sii_l2t4_req[16] ^ `TOP.cpu.sii_l2t4_req[17] ^ `TOP.cpu.sii_l2t4_req[18] ^ `TOP.cpu.sii_l2t4_req[19] ^ `TOP.cpu.sii_l2t4_req[20] ^ `TOP.cpu.sii_l2t4_req[21] ^ `TOP.cpu.sii_l2t4_req[22] ^ `TOP.cpu.sii_l2t4_req[23] ^ `TOP.cpu.sii_l2t4_req[24] ^ `TOP.cpu.sii_l2t4_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t4_req_vld,3))) && ($0in_delay(sii_l2t4_req[24] == 0,3)) && ($0in_delay(sii_l2t4_req[25] == 1,3)) && ($0in_delay(sii_l2t4_req[26] == 0,3)) && !(sii_wr8_ecc4_l4_cycle2 == sii_l2b4_ecc[4]))
      -clock l2clk
      -message "data ecc error for wr8 in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc4_l4_wr8_cycle2
*/

wire sii_wr8_ecc5_l4_cycle2 =  (`TOP.cpu.sii_l2t4_req[26] ^ `TOP.cpu.sii_l2t4_req[27] ^ `TOP.cpu.sii_l2t4_req[28] ^ `TOP.cpu.sii_l2t4_req[29] ^ `TOP.cpu.sii_l2t4_req[30] ^ `TOP.cpu.sii_l2t4_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t4_req_vld,3))) && ($0in_delay(sii_l2t4_req[24] == 0,3)) && ($0in_delay(sii_l2t4_req[25] == 1,3)) && ($0in_delay(sii_l2t4_req[26] == 0,3)) && !(sii_wr8_ecc5_l4_cycle2 == sii_l2b4_ecc[5]))
      -clock l2clk
      -message "data ecc error for wr8 in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc5_l4_wr8_cycle2
*/

wire sii_wr8_ecc6_l4_cycle2 =  (`TOP.cpu.sii_l2t4_req[0] ^ `TOP.cpu.sii_l2t4_req[1] ^ `TOP.cpu.sii_l2t4_req[2] ^ `TOP.cpu.sii_l2t4_req[4] ^ `TOP.cpu.sii_l2t4_req[5] ^ `TOP.cpu.sii_l2t4_req[7] ^ `TOP.cpu.sii_l2t4_req[10] ^ `TOP.cpu.sii_l2t4_req[11] ^ `TOP.cpu.sii_l2t4_req[12] ^ `TOP.cpu.sii_l2t4_req[14] ^ `TOP.cpu.sii_l2t4_req[17] ^ `TOP.cpu.sii_l2t4_req[18] ^ `TOP.cpu.sii_l2t4_req[21] ^ `TOP.cpu.sii_l2t4_req[23] ^ `TOP.cpu.sii_l2t4_req[24] ^ `TOP.cpu.sii_l2t4_req[26] ^ `TOP.cpu.sii_l2t4_req[27] ^ `TOP.cpu.sii_l2t4_req[29] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t4_req_vld,3))) && ($0in_delay(sii_l2t4_req[24] == 0,3)) && ($0in_delay(sii_l2t4_req[25] == 1,3)) && ($0in_delay(sii_l2t4_req[26] == 0,3)) && !(sii_wr8_ecc6_l4_cycle2 == sii_l2b4_ecc[6]))
      -clock l2clk
      -message "data ecc error for wr8 in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc6_l4_wr8_cycle2
*/

wire sii_wr8_ecc0_l5_cycle1 =  (`TOP.cpu.sii_l2t5_req[0] ^ `TOP.cpu.sii_l2t5_req[1] ^ `TOP.cpu.sii_l2t5_req[3] ^ `TOP.cpu.sii_l2t5_req[4] ^ `TOP.cpu.sii_l2t5_req[6] ^ `TOP.cpu.sii_l2t5_req[8] ^ `TOP.cpu.sii_l2t5_req[10] ^ `TOP.cpu.sii_l2t5_req[11] ^ `TOP.cpu.sii_l2t5_req[13] ^ `TOP.cpu.sii_l2t5_req[15] ^ `TOP.cpu.sii_l2t5_req[17] ^ `TOP.cpu.sii_l2t5_req[19] ^ `TOP.cpu.sii_l2t5_req[21] ^ `TOP.cpu.sii_l2t5_req[23] ^ `TOP.cpu.sii_l2t5_req[25] ^ `TOP.cpu.sii_l2t5_req[26] ^ `TOP.cpu.sii_l2t5_req[28] ^ `TOP.cpu.sii_l2t5_req[30] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t5_req_vld,2))) && ($0in_delay(sii_l2t5_req[24] == 0,2)) && ($0in_delay(sii_l2t5_req[25] == 1,2)) && ($0in_delay(sii_l2t5_req[26] == 0,2)) && !(sii_wr8_ecc0_l5_cycle1 == sii_l2b5_ecc[0]))
      -clock l2clk
      -message "data ecc error for wr8 in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc0_l5_wr8_cycle1
*/

wire sii_wr8_ecc1_l5_cycle1 =  (`TOP.cpu.sii_l2t5_req[0] ^ `TOP.cpu.sii_l2t5_req[2] ^ `TOP.cpu.sii_l2t5_req[3] ^ `TOP.cpu.sii_l2t5_req[5] ^ `TOP.cpu.sii_l2t5_req[6] ^ `TOP.cpu.sii_l2t5_req[9] ^ `TOP.cpu.sii_l2t5_req[10] ^ `TOP.cpu.sii_l2t5_req[12] ^ `TOP.cpu.sii_l2t5_req[13] ^ `TOP.cpu.sii_l2t5_req[16] ^ `TOP.cpu.sii_l2t5_req[17] ^ `TOP.cpu.sii_l2t5_req[20] ^ `TOP.cpu.sii_l2t5_req[21] ^ `TOP.cpu.sii_l2t5_req[24] ^ `TOP.cpu.sii_l2t5_req[25] ^ `TOP.cpu.sii_l2t5_req[27] ^ `TOP.cpu.sii_l2t5_req[28] ^ `TOP.cpu.sii_l2t5_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t5_req_vld,2))) && ($0in_delay(sii_l2t5_req[24] == 0,2)) && ($0in_delay(sii_l2t5_req[25] == 1,2)) && ($0in_delay(sii_l2t5_req[26] == 0,2)) && !(sii_wr8_ecc1_l5_cycle1 == sii_l2b5_ecc[1]))
      -clock l2clk
      -message "data ecc error for wr8 in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc1_l5_wr8_cycle1
*/

wire sii_wr8_ecc2_l5_cycle1 =  (`TOP.cpu.sii_l2t5_req[1] ^ `TOP.cpu.sii_l2t5_req[2] ^ `TOP.cpu.sii_l2t5_req[3] ^ `TOP.cpu.sii_l2t5_req[7] ^ `TOP.cpu.sii_l2t5_req[8] ^ `TOP.cpu.sii_l2t5_req[9] ^ `TOP.cpu.sii_l2t5_req[10] ^ `TOP.cpu.sii_l2t5_req[14] ^ `TOP.cpu.sii_l2t5_req[15] ^ `TOP.cpu.sii_l2t5_req[16] ^ `TOP.cpu.sii_l2t5_req[17] ^ `TOP.cpu.sii_l2t5_req[22] ^ `TOP.cpu.sii_l2t5_req[23] ^ `TOP.cpu.sii_l2t5_req[24] ^ `TOP.cpu.sii_l2t5_req[25] ^ `TOP.cpu.sii_l2t5_req[29] ^ `TOP.cpu.sii_l2t5_req[30] ^ `TOP.cpu.sii_l2t5_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t5_req_vld,2))) && ($0in_delay(sii_l2t5_req[24] == 0,2)) && ($0in_delay(sii_l2t5_req[25] == 1,2)) && ($0in_delay(sii_l2t5_req[26] == 0,2)) && !(sii_wr8_ecc2_l5_cycle1 == sii_l2b5_ecc[2]))
      -clock l2clk
      -message "data ecc error for wr8 in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc2_l5_wr8_cycle1
*/

wire sii_wr8_ecc3_l5_cycle1 =  (`TOP.cpu.sii_l2t5_req[4] ^ `TOP.cpu.sii_l2t5_req[5] ^ `TOP.cpu.sii_l2t5_req[6] ^ `TOP.cpu.sii_l2t5_req[7] ^ `TOP.cpu.sii_l2t5_req[8] ^ `TOP.cpu.sii_l2t5_req[9] ^ `TOP.cpu.sii_l2t5_req[10] ^ `TOP.cpu.sii_l2t5_req[18] ^ `TOP.cpu.sii_l2t5_req[19] ^ `TOP.cpu.sii_l2t5_req[20] ^ `TOP.cpu.sii_l2t5_req[21] ^ `TOP.cpu.sii_l2t5_req[22] ^ `TOP.cpu.sii_l2t5_req[23] ^ `TOP.cpu.sii_l2t5_req[24] ^ `TOP.cpu.sii_l2t5_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t5_req_vld,2))) && ($0in_delay(sii_l2t5_req[24] == 0,2)) && ($0in_delay(sii_l2t5_req[25] == 1,2)) && ($0in_delay(sii_l2t5_req[26] == 0,2)) && !(sii_wr8_ecc3_l5_cycle1 == sii_l2b5_ecc[3]))
      -clock l2clk
      -message "data ecc error for wr8 in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc3_l5_wr8_cycle1
*/

wire sii_wr8_ecc4_l5_cycle1 =  ( `TOP.cpu.sii_l2t5_req[11] ^ `TOP.cpu.sii_l2t5_req[12] ^ `TOP.cpu.sii_l2t5_req[13] ^ `TOP.cpu.sii_l2t5_req[14] ^ `TOP.cpu.sii_l2t5_req[15] ^ `TOP.cpu.sii_l2t5_req[16] ^ `TOP.cpu.sii_l2t5_req[17] ^ `TOP.cpu.sii_l2t5_req[18] ^ `TOP.cpu.sii_l2t5_req[19] ^ `TOP.cpu.sii_l2t5_req[20] ^ `TOP.cpu.sii_l2t5_req[21] ^ `TOP.cpu.sii_l2t5_req[22] ^ `TOP.cpu.sii_l2t5_req[23] ^ `TOP.cpu.sii_l2t5_req[24] ^ `TOP.cpu.sii_l2t5_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t5_req_vld,2))) && ($0in_delay(sii_l2t5_req[24] == 0,2)) && ($0in_delay(sii_l2t5_req[25] == 1,2)) && ($0in_delay(sii_l2t5_req[26] == 0,2)) && !(sii_wr8_ecc4_l5_cycle1 == sii_l2b5_ecc[4]))
      -clock l2clk
      -message "data ecc error for wr8 in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc4_l5_wr8_cycle1
*/

wire sii_wr8_ecc5_l5_cycle1 =  (`TOP.cpu.sii_l2t5_req[26] ^ `TOP.cpu.sii_l2t5_req[27] ^ `TOP.cpu.sii_l2t5_req[28] ^ `TOP.cpu.sii_l2t5_req[29] ^ `TOP.cpu.sii_l2t5_req[30] ^ `TOP.cpu.sii_l2t5_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t5_req_vld,2))) && ($0in_delay(sii_l2t5_req[24] == 0,2)) && ($0in_delay(sii_l2t5_req[25] == 1,2)) && ($0in_delay(sii_l2t5_req[26] == 0,2)) && !(sii_wr8_ecc5_l5_cycle1 == sii_l2b5_ecc[5]))
      -clock l2clk
      -message "data ecc error for wr8 in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc5_l5_wr8_cycle1
*/

wire sii_wr8_ecc6_l5_cycle1 =  (`TOP.cpu.sii_l2t5_req[0] ^ `TOP.cpu.sii_l2t5_req[1] ^ `TOP.cpu.sii_l2t5_req[2] ^ `TOP.cpu.sii_l2t5_req[4] ^ `TOP.cpu.sii_l2t5_req[5] ^ `TOP.cpu.sii_l2t5_req[7] ^ `TOP.cpu.sii_l2t5_req[10] ^ `TOP.cpu.sii_l2t5_req[11] ^ `TOP.cpu.sii_l2t5_req[12] ^ `TOP.cpu.sii_l2t5_req[14] ^ `TOP.cpu.sii_l2t5_req[17] ^ `TOP.cpu.sii_l2t5_req[18] ^ `TOP.cpu.sii_l2t5_req[21] ^ `TOP.cpu.sii_l2t5_req[23] ^ `TOP.cpu.sii_l2t5_req[24] ^ `TOP.cpu.sii_l2t5_req[26] ^ `TOP.cpu.sii_l2t5_req[27] ^ `TOP.cpu.sii_l2t5_req[29] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t5_req_vld,2))) && ($0in_delay(sii_l2t5_req[24] == 0,2)) && ($0in_delay(sii_l2t5_req[25] == 1,2)) && ($0in_delay(sii_l2t5_req[26] == 0,2)) && !(sii_wr8_ecc6_l5_cycle1 == sii_l2b5_ecc[6]))
      -clock l2clk
      -message "data ecc error for wr8 in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc6_l5_wr8_cycle1
*/

wire sii_wr8_ecc0_l5_cycle2 =  (`TOP.cpu.sii_l2t5_req[0] ^ `TOP.cpu.sii_l2t5_req[1] ^ `TOP.cpu.sii_l2t5_req[3] ^ `TOP.cpu.sii_l2t5_req[4] ^ `TOP.cpu.sii_l2t5_req[6] ^ `TOP.cpu.sii_l2t5_req[8] ^ `TOP.cpu.sii_l2t5_req[10] ^ `TOP.cpu.sii_l2t5_req[11] ^ `TOP.cpu.sii_l2t5_req[13] ^ `TOP.cpu.sii_l2t5_req[15] ^ `TOP.cpu.sii_l2t5_req[17] ^ `TOP.cpu.sii_l2t5_req[19] ^ `TOP.cpu.sii_l2t5_req[21] ^ `TOP.cpu.sii_l2t5_req[23] ^ `TOP.cpu.sii_l2t5_req[25] ^ `TOP.cpu.sii_l2t5_req[26] ^ `TOP.cpu.sii_l2t5_req[28] ^ `TOP.cpu.sii_l2t5_req[30] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t5_req_vld,3))) && ($0in_delay(sii_l2t5_req[24] == 0,3)) && ($0in_delay(sii_l2t5_req[25] == 1,3)) && ($0in_delay(sii_l2t5_req[26] == 0,3)) && !(sii_wr8_ecc0_l5_cycle2 == sii_l2b5_ecc[0]))
      -clock l2clk
      -message "data ecc error for wr8 in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc0_l5_wr8_cycle2
*/

wire sii_wr8_ecc1_l5_cycle2 =  (`TOP.cpu.sii_l2t5_req[0] ^ `TOP.cpu.sii_l2t5_req[2] ^ `TOP.cpu.sii_l2t5_req[3] ^ `TOP.cpu.sii_l2t5_req[5] ^ `TOP.cpu.sii_l2t5_req[6] ^ `TOP.cpu.sii_l2t5_req[9] ^ `TOP.cpu.sii_l2t5_req[10] ^ `TOP.cpu.sii_l2t5_req[12] ^ `TOP.cpu.sii_l2t5_req[13] ^ `TOP.cpu.sii_l2t5_req[16] ^ `TOP.cpu.sii_l2t5_req[17] ^ `TOP.cpu.sii_l2t5_req[20] ^ `TOP.cpu.sii_l2t5_req[21] ^ `TOP.cpu.sii_l2t5_req[24] ^ `TOP.cpu.sii_l2t5_req[25] ^ `TOP.cpu.sii_l2t5_req[27] ^ `TOP.cpu.sii_l2t5_req[28] ^ `TOP.cpu.sii_l2t5_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t5_req_vld,3))) && ($0in_delay(sii_l2t5_req[24] == 0,3)) && ($0in_delay(sii_l2t5_req[25] == 1,3)) && ($0in_delay(sii_l2t5_req[26] == 0,3)) && !(sii_wr8_ecc1_l5_cycle2 == sii_l2b5_ecc[1]))
      -clock l2clk
      -message "data ecc error for wr8 in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc1_l5_wr8_cycle2
*/

wire sii_wr8_ecc2_l5_cycle2 =  (`TOP.cpu.sii_l2t5_req[1] ^ `TOP.cpu.sii_l2t5_req[2] ^ `TOP.cpu.sii_l2t5_req[3] ^ `TOP.cpu.sii_l2t5_req[7] ^ `TOP.cpu.sii_l2t5_req[8] ^ `TOP.cpu.sii_l2t5_req[9] ^ `TOP.cpu.sii_l2t5_req[10] ^ `TOP.cpu.sii_l2t5_req[14] ^ `TOP.cpu.sii_l2t5_req[15] ^ `TOP.cpu.sii_l2t5_req[16] ^ `TOP.cpu.sii_l2t5_req[17] ^ `TOP.cpu.sii_l2t5_req[22] ^ `TOP.cpu.sii_l2t5_req[23] ^ `TOP.cpu.sii_l2t5_req[24] ^ `TOP.cpu.sii_l2t5_req[25] ^ `TOP.cpu.sii_l2t5_req[29] ^ `TOP.cpu.sii_l2t5_req[30] ^ `TOP.cpu.sii_l2t5_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t5_req_vld,3))) && ($0in_delay(sii_l2t5_req[24] == 0,3)) && ($0in_delay(sii_l2t5_req[25] == 1,3)) && ($0in_delay(sii_l2t5_req[26] == 0,3)) && !(sii_wr8_ecc2_l5_cycle2 == sii_l2b5_ecc[2]))
      -clock l2clk
      -message "data ecc error for wr8 in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc2_l5_wr8_cycle2
*/

wire sii_wr8_ecc3_l5_cycle2 =  (`TOP.cpu.sii_l2t5_req[4] ^ `TOP.cpu.sii_l2t5_req[5] ^ `TOP.cpu.sii_l2t5_req[6] ^ `TOP.cpu.sii_l2t5_req[7] ^ `TOP.cpu.sii_l2t5_req[8] ^ `TOP.cpu.sii_l2t5_req[9] ^ `TOP.cpu.sii_l2t5_req[10] ^ `TOP.cpu.sii_l2t5_req[18] ^ `TOP.cpu.sii_l2t5_req[19] ^ `TOP.cpu.sii_l2t5_req[20] ^ `TOP.cpu.sii_l2t5_req[21] ^ `TOP.cpu.sii_l2t5_req[22] ^ `TOP.cpu.sii_l2t5_req[23] ^ `TOP.cpu.sii_l2t5_req[24] ^ `TOP.cpu.sii_l2t5_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t5_req_vld,3))) && ($0in_delay(sii_l2t5_req[24] == 0,3)) && ($0in_delay(sii_l2t5_req[25] == 1,3)) && ($0in_delay(sii_l2t5_req[26] == 0,3)) && !(sii_wr8_ecc3_l5_cycle2 == sii_l2b5_ecc[3]))
      -clock l2clk
      -message "data ecc error for wr8 in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc3_l5_wr8_cycle2
*/

wire sii_wr8_ecc4_l5_cycle2 =  ( `TOP.cpu.sii_l2t5_req[11] ^ `TOP.cpu.sii_l2t5_req[12] ^ `TOP.cpu.sii_l2t5_req[13] ^ `TOP.cpu.sii_l2t5_req[14] ^ `TOP.cpu.sii_l2t5_req[15] ^ `TOP.cpu.sii_l2t5_req[16] ^ `TOP.cpu.sii_l2t5_req[17] ^ `TOP.cpu.sii_l2t5_req[18] ^ `TOP.cpu.sii_l2t5_req[19] ^ `TOP.cpu.sii_l2t5_req[20] ^ `TOP.cpu.sii_l2t5_req[21] ^ `TOP.cpu.sii_l2t5_req[22] ^ `TOP.cpu.sii_l2t5_req[23] ^ `TOP.cpu.sii_l2t5_req[24] ^ `TOP.cpu.sii_l2t5_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t5_req_vld,3))) && ($0in_delay(sii_l2t5_req[24] == 0,3)) && ($0in_delay(sii_l2t5_req[25] == 1,3)) && ($0in_delay(sii_l2t5_req[26] == 0,3)) && !(sii_wr8_ecc4_l5_cycle2 == sii_l2b5_ecc[4]))
      -clock l2clk
      -message "data ecc error for wr8 in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc4_l5_wr8_cycle2
*/

wire sii_wr8_ecc5_l5_cycle2 =  (`TOP.cpu.sii_l2t5_req[26] ^ `TOP.cpu.sii_l2t5_req[27] ^ `TOP.cpu.sii_l2t5_req[28] ^ `TOP.cpu.sii_l2t5_req[29] ^ `TOP.cpu.sii_l2t5_req[30] ^ `TOP.cpu.sii_l2t5_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t5_req_vld,3))) && ($0in_delay(sii_l2t5_req[24] == 0,3)) && ($0in_delay(sii_l2t5_req[25] == 1,3)) && ($0in_delay(sii_l2t5_req[26] == 0,3)) && !(sii_wr8_ecc5_l5_cycle2 == sii_l2b5_ecc[5]))
      -clock l2clk
      -message "data ecc error for wr8 in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc5_l5_wr8_cycle2
*/

wire sii_wr8_ecc6_l5_cycle2 =  (`TOP.cpu.sii_l2t5_req[0] ^ `TOP.cpu.sii_l2t5_req[1] ^ `TOP.cpu.sii_l2t5_req[2] ^ `TOP.cpu.sii_l2t5_req[4] ^ `TOP.cpu.sii_l2t5_req[5] ^ `TOP.cpu.sii_l2t5_req[7] ^ `TOP.cpu.sii_l2t5_req[10] ^ `TOP.cpu.sii_l2t5_req[11] ^ `TOP.cpu.sii_l2t5_req[12] ^ `TOP.cpu.sii_l2t5_req[14] ^ `TOP.cpu.sii_l2t5_req[17] ^ `TOP.cpu.sii_l2t5_req[18] ^ `TOP.cpu.sii_l2t5_req[21] ^ `TOP.cpu.sii_l2t5_req[23] ^ `TOP.cpu.sii_l2t5_req[24] ^ `TOP.cpu.sii_l2t5_req[26] ^ `TOP.cpu.sii_l2t5_req[27] ^ `TOP.cpu.sii_l2t5_req[29] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t5_req_vld,3))) && ($0in_delay(sii_l2t5_req[24] == 0,3)) && ($0in_delay(sii_l2t5_req[25] == 1,3)) && ($0in_delay(sii_l2t5_req[26] == 0,3)) && !(sii_wr8_ecc6_l5_cycle2 == sii_l2b5_ecc[6]))
      -clock l2clk
      -message "data ecc error for wr8 in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc6_l5_wr8_cycle2
*/

wire sii_wr8_ecc0_l6_cycle1 =  (`TOP.cpu.sii_l2t6_req[0] ^ `TOP.cpu.sii_l2t6_req[1] ^ `TOP.cpu.sii_l2t6_req[3] ^ `TOP.cpu.sii_l2t6_req[4] ^ `TOP.cpu.sii_l2t6_req[6] ^ `TOP.cpu.sii_l2t6_req[8] ^ `TOP.cpu.sii_l2t6_req[10] ^ `TOP.cpu.sii_l2t6_req[11] ^ `TOP.cpu.sii_l2t6_req[13] ^ `TOP.cpu.sii_l2t6_req[15] ^ `TOP.cpu.sii_l2t6_req[17] ^ `TOP.cpu.sii_l2t6_req[19] ^ `TOP.cpu.sii_l2t6_req[21] ^ `TOP.cpu.sii_l2t6_req[23] ^ `TOP.cpu.sii_l2t6_req[25] ^ `TOP.cpu.sii_l2t6_req[26] ^ `TOP.cpu.sii_l2t6_req[28] ^ `TOP.cpu.sii_l2t6_req[30] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t6_req_vld,2))) && ($0in_delay(sii_l2t6_req[24] == 0,2)) && ($0in_delay(sii_l2t6_req[25] == 1,2)) && ($0in_delay(sii_l2t6_req[26] == 0,2)) && !(sii_wr8_ecc0_l6_cycle1 == sii_l2b6_ecc[0]))
      -clock l2clk
      -message "data ecc error for wr8 in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc0_l6_wr8_cycle1
*/

wire sii_wr8_ecc1_l6_cycle1 =  (`TOP.cpu.sii_l2t6_req[0] ^ `TOP.cpu.sii_l2t6_req[2] ^ `TOP.cpu.sii_l2t6_req[3] ^ `TOP.cpu.sii_l2t6_req[5] ^ `TOP.cpu.sii_l2t6_req[6] ^ `TOP.cpu.sii_l2t6_req[9] ^ `TOP.cpu.sii_l2t6_req[10] ^ `TOP.cpu.sii_l2t6_req[12] ^ `TOP.cpu.sii_l2t6_req[13] ^ `TOP.cpu.sii_l2t6_req[16] ^ `TOP.cpu.sii_l2t6_req[17] ^ `TOP.cpu.sii_l2t6_req[20] ^ `TOP.cpu.sii_l2t6_req[21] ^ `TOP.cpu.sii_l2t6_req[24] ^ `TOP.cpu.sii_l2t6_req[25] ^ `TOP.cpu.sii_l2t6_req[27] ^ `TOP.cpu.sii_l2t6_req[28] ^ `TOP.cpu.sii_l2t6_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t6_req_vld,2))) && ($0in_delay(sii_l2t6_req[24] == 0,2)) && ($0in_delay(sii_l2t6_req[25] == 1,2)) && ($0in_delay(sii_l2t6_req[26] == 0,2)) && !(sii_wr8_ecc1_l6_cycle1 == sii_l2b6_ecc[1]))
      -clock l2clk
      -message "data ecc error for wr8 in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc1_l6_wr8_cycle1
*/

wire sii_wr8_ecc2_l6_cycle1 =  (`TOP.cpu.sii_l2t6_req[1] ^ `TOP.cpu.sii_l2t6_req[2] ^ `TOP.cpu.sii_l2t6_req[3] ^ `TOP.cpu.sii_l2t6_req[7] ^ `TOP.cpu.sii_l2t6_req[8] ^ `TOP.cpu.sii_l2t6_req[9] ^ `TOP.cpu.sii_l2t6_req[10] ^ `TOP.cpu.sii_l2t6_req[14] ^ `TOP.cpu.sii_l2t6_req[15] ^ `TOP.cpu.sii_l2t6_req[16] ^ `TOP.cpu.sii_l2t6_req[17] ^ `TOP.cpu.sii_l2t6_req[22] ^ `TOP.cpu.sii_l2t6_req[23] ^ `TOP.cpu.sii_l2t6_req[24] ^ `TOP.cpu.sii_l2t6_req[25] ^ `TOP.cpu.sii_l2t6_req[29] ^ `TOP.cpu.sii_l2t6_req[30] ^ `TOP.cpu.sii_l2t6_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t6_req_vld,2))) && ($0in_delay(sii_l2t6_req[24] == 0,2)) && ($0in_delay(sii_l2t6_req[25] == 1,2)) && ($0in_delay(sii_l2t6_req[26] == 0,2)) && !(sii_wr8_ecc2_l6_cycle1 == sii_l2b6_ecc[2]))
      -clock l2clk
      -message "data ecc error for wr8 in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc2_l6_wr8_cycle1
*/

wire sii_wr8_ecc3_l6_cycle1 =  (`TOP.cpu.sii_l2t6_req[4] ^ `TOP.cpu.sii_l2t6_req[5] ^ `TOP.cpu.sii_l2t6_req[6] ^ `TOP.cpu.sii_l2t6_req[7] ^ `TOP.cpu.sii_l2t6_req[8] ^ `TOP.cpu.sii_l2t6_req[9] ^ `TOP.cpu.sii_l2t6_req[10] ^ `TOP.cpu.sii_l2t6_req[18] ^ `TOP.cpu.sii_l2t6_req[19] ^ `TOP.cpu.sii_l2t6_req[20] ^ `TOP.cpu.sii_l2t6_req[21] ^ `TOP.cpu.sii_l2t6_req[22] ^ `TOP.cpu.sii_l2t6_req[23] ^ `TOP.cpu.sii_l2t6_req[24] ^ `TOP.cpu.sii_l2t6_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t6_req_vld,2))) && ($0in_delay(sii_l2t6_req[24] == 0,2)) && ($0in_delay(sii_l2t6_req[25] == 1,2)) && ($0in_delay(sii_l2t6_req[26] == 0,2)) && !(sii_wr8_ecc3_l6_cycle1 == sii_l2b6_ecc[3]))
      -clock l2clk
      -message "data ecc error for wr8 in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc3_l6_wr8_cycle1
*/

wire sii_wr8_ecc4_l6_cycle1 =  ( `TOP.cpu.sii_l2t6_req[11] ^ `TOP.cpu.sii_l2t6_req[12] ^ `TOP.cpu.sii_l2t6_req[13] ^ `TOP.cpu.sii_l2t6_req[14] ^ `TOP.cpu.sii_l2t6_req[15] ^ `TOP.cpu.sii_l2t6_req[16] ^ `TOP.cpu.sii_l2t6_req[17] ^ `TOP.cpu.sii_l2t6_req[18] ^ `TOP.cpu.sii_l2t6_req[19] ^ `TOP.cpu.sii_l2t6_req[20] ^ `TOP.cpu.sii_l2t6_req[21] ^ `TOP.cpu.sii_l2t6_req[22] ^ `TOP.cpu.sii_l2t6_req[23] ^ `TOP.cpu.sii_l2t6_req[24] ^ `TOP.cpu.sii_l2t6_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t6_req_vld,2))) && ($0in_delay(sii_l2t6_req[24] == 0,2)) && ($0in_delay(sii_l2t6_req[25] == 1,2)) && ($0in_delay(sii_l2t6_req[26] == 0,2)) && !(sii_wr8_ecc4_l6_cycle1 == sii_l2b6_ecc[4]))
      -clock l2clk
      -message "data ecc error for wr8 in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc4_l6_wr8_cycle1
*/

wire sii_wr8_ecc5_l6_cycle1 =  (`TOP.cpu.sii_l2t6_req[26] ^ `TOP.cpu.sii_l2t6_req[27] ^ `TOP.cpu.sii_l2t6_req[28] ^ `TOP.cpu.sii_l2t6_req[29] ^ `TOP.cpu.sii_l2t6_req[30] ^ `TOP.cpu.sii_l2t6_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t6_req_vld,2))) && ($0in_delay(sii_l2t6_req[24] == 0,2)) && ($0in_delay(sii_l2t6_req[25] == 1,2)) && ($0in_delay(sii_l2t6_req[26] == 0,2)) && !(sii_wr8_ecc5_l6_cycle1 == sii_l2b6_ecc[5]))
      -clock l2clk
      -message "data ecc error for wr8 in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc5_l6_wr8_cycle1
*/

wire sii_wr8_ecc6_l6_cycle1 =  (`TOP.cpu.sii_l2t6_req[0] ^ `TOP.cpu.sii_l2t6_req[1] ^ `TOP.cpu.sii_l2t6_req[2] ^ `TOP.cpu.sii_l2t6_req[4] ^ `TOP.cpu.sii_l2t6_req[5] ^ `TOP.cpu.sii_l2t6_req[7] ^ `TOP.cpu.sii_l2t6_req[10] ^ `TOP.cpu.sii_l2t6_req[11] ^ `TOP.cpu.sii_l2t6_req[12] ^ `TOP.cpu.sii_l2t6_req[14] ^ `TOP.cpu.sii_l2t6_req[17] ^ `TOP.cpu.sii_l2t6_req[18] ^ `TOP.cpu.sii_l2t6_req[21] ^ `TOP.cpu.sii_l2t6_req[23] ^ `TOP.cpu.sii_l2t6_req[24] ^ `TOP.cpu.sii_l2t6_req[26] ^ `TOP.cpu.sii_l2t6_req[27] ^ `TOP.cpu.sii_l2t6_req[29] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t6_req_vld,2))) && ($0in_delay(sii_l2t6_req[24] == 0,2)) && ($0in_delay(sii_l2t6_req[25] == 1,2)) && ($0in_delay(sii_l2t6_req[26] == 0,2)) && !(sii_wr8_ecc6_l6_cycle1 == sii_l2b6_ecc[6]))
      -clock l2clk
      -message "data ecc error for wr8 in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc6_l6_wr8_cycle1
*/

wire sii_wr8_ecc0_l6_cycle2 =  (`TOP.cpu.sii_l2t6_req[0] ^ `TOP.cpu.sii_l2t6_req[1] ^ `TOP.cpu.sii_l2t6_req[3] ^ `TOP.cpu.sii_l2t6_req[4] ^ `TOP.cpu.sii_l2t6_req[6] ^ `TOP.cpu.sii_l2t6_req[8] ^ `TOP.cpu.sii_l2t6_req[10] ^ `TOP.cpu.sii_l2t6_req[11] ^ `TOP.cpu.sii_l2t6_req[13] ^ `TOP.cpu.sii_l2t6_req[15] ^ `TOP.cpu.sii_l2t6_req[17] ^ `TOP.cpu.sii_l2t6_req[19] ^ `TOP.cpu.sii_l2t6_req[21] ^ `TOP.cpu.sii_l2t6_req[23] ^ `TOP.cpu.sii_l2t6_req[25] ^ `TOP.cpu.sii_l2t6_req[26] ^ `TOP.cpu.sii_l2t6_req[28] ^ `TOP.cpu.sii_l2t6_req[30] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t6_req_vld,3))) && ($0in_delay(sii_l2t6_req[24] == 0,3)) && ($0in_delay(sii_l2t6_req[25] == 1,3)) && ($0in_delay(sii_l2t6_req[26] == 0,3)) && !(sii_wr8_ecc0_l6_cycle2 == sii_l2b6_ecc[0]))
      -clock l2clk
      -message "data ecc error for wr8 in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc0_l6_wr8_cycle2
*/

wire sii_wr8_ecc1_l6_cycle2 =  (`TOP.cpu.sii_l2t6_req[0] ^ `TOP.cpu.sii_l2t6_req[2] ^ `TOP.cpu.sii_l2t6_req[3] ^ `TOP.cpu.sii_l2t6_req[5] ^ `TOP.cpu.sii_l2t6_req[6] ^ `TOP.cpu.sii_l2t6_req[9] ^ `TOP.cpu.sii_l2t6_req[10] ^ `TOP.cpu.sii_l2t6_req[12] ^ `TOP.cpu.sii_l2t6_req[13] ^ `TOP.cpu.sii_l2t6_req[16] ^ `TOP.cpu.sii_l2t6_req[17] ^ `TOP.cpu.sii_l2t6_req[20] ^ `TOP.cpu.sii_l2t6_req[21] ^ `TOP.cpu.sii_l2t6_req[24] ^ `TOP.cpu.sii_l2t6_req[25] ^ `TOP.cpu.sii_l2t6_req[27] ^ `TOP.cpu.sii_l2t6_req[28] ^ `TOP.cpu.sii_l2t6_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t6_req_vld,3))) && ($0in_delay(sii_l2t6_req[24] == 0,3)) && ($0in_delay(sii_l2t6_req[25] == 1,3)) && ($0in_delay(sii_l2t6_req[26] == 0,3)) && !(sii_wr8_ecc1_l6_cycle2 == sii_l2b6_ecc[1]))
      -clock l2clk
      -message "data ecc error for wr8 in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc1_l6_wr8_cycle2
*/

wire sii_wr8_ecc2_l6_cycle2 =  (`TOP.cpu.sii_l2t6_req[1] ^ `TOP.cpu.sii_l2t6_req[2] ^ `TOP.cpu.sii_l2t6_req[3] ^ `TOP.cpu.sii_l2t6_req[7] ^ `TOP.cpu.sii_l2t6_req[8] ^ `TOP.cpu.sii_l2t6_req[9] ^ `TOP.cpu.sii_l2t6_req[10] ^ `TOP.cpu.sii_l2t6_req[14] ^ `TOP.cpu.sii_l2t6_req[15] ^ `TOP.cpu.sii_l2t6_req[16] ^ `TOP.cpu.sii_l2t6_req[17] ^ `TOP.cpu.sii_l2t6_req[22] ^ `TOP.cpu.sii_l2t6_req[23] ^ `TOP.cpu.sii_l2t6_req[24] ^ `TOP.cpu.sii_l2t6_req[25] ^ `TOP.cpu.sii_l2t6_req[29] ^ `TOP.cpu.sii_l2t6_req[30] ^ `TOP.cpu.sii_l2t6_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t6_req_vld,3))) && ($0in_delay(sii_l2t6_req[24] == 0,3)) && ($0in_delay(sii_l2t6_req[25] == 1,3)) && ($0in_delay(sii_l2t6_req[26] == 0,3)) && !(sii_wr8_ecc2_l6_cycle2 == sii_l2b6_ecc[2]))
      -clock l2clk
      -message "data ecc error for wr8 in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc2_l6_wr8_cycle2
*/

wire sii_wr8_ecc3_l6_cycle2 =  (`TOP.cpu.sii_l2t6_req[4] ^ `TOP.cpu.sii_l2t6_req[5] ^ `TOP.cpu.sii_l2t6_req[6] ^ `TOP.cpu.sii_l2t6_req[7] ^ `TOP.cpu.sii_l2t6_req[8] ^ `TOP.cpu.sii_l2t6_req[9] ^ `TOP.cpu.sii_l2t6_req[10] ^ `TOP.cpu.sii_l2t6_req[18] ^ `TOP.cpu.sii_l2t6_req[19] ^ `TOP.cpu.sii_l2t6_req[20] ^ `TOP.cpu.sii_l2t6_req[21] ^ `TOP.cpu.sii_l2t6_req[22] ^ `TOP.cpu.sii_l2t6_req[23] ^ `TOP.cpu.sii_l2t6_req[24] ^ `TOP.cpu.sii_l2t6_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t6_req_vld,3))) && ($0in_delay(sii_l2t6_req[24] == 0,3)) && ($0in_delay(sii_l2t6_req[25] == 1,3)) && ($0in_delay(sii_l2t6_req[26] == 0,3)) && !(sii_wr8_ecc3_l6_cycle2 == sii_l2b6_ecc[3]))
      -clock l2clk
      -message "data ecc error for wr8 in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc3_l6_wr8_cycle2
*/

wire sii_wr8_ecc4_l6_cycle2 =  ( `TOP.cpu.sii_l2t6_req[11] ^ `TOP.cpu.sii_l2t6_req[12] ^ `TOP.cpu.sii_l2t6_req[13] ^ `TOP.cpu.sii_l2t6_req[14] ^ `TOP.cpu.sii_l2t6_req[15] ^ `TOP.cpu.sii_l2t6_req[16] ^ `TOP.cpu.sii_l2t6_req[17] ^ `TOP.cpu.sii_l2t6_req[18] ^ `TOP.cpu.sii_l2t6_req[19] ^ `TOP.cpu.sii_l2t6_req[20] ^ `TOP.cpu.sii_l2t6_req[21] ^ `TOP.cpu.sii_l2t6_req[22] ^ `TOP.cpu.sii_l2t6_req[23] ^ `TOP.cpu.sii_l2t6_req[24] ^ `TOP.cpu.sii_l2t6_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t6_req_vld,3))) && ($0in_delay(sii_l2t6_req[24] == 0,3)) && ($0in_delay(sii_l2t6_req[25] == 1,3)) && ($0in_delay(sii_l2t6_req[26] == 0,3)) && !(sii_wr8_ecc4_l6_cycle2 == sii_l2b6_ecc[4]))
      -clock l2clk
      -message "data ecc error for wr8 in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc4_l6_wr8_cycle2
*/

wire sii_wr8_ecc5_l6_cycle2 =  (`TOP.cpu.sii_l2t6_req[26] ^ `TOP.cpu.sii_l2t6_req[27] ^ `TOP.cpu.sii_l2t6_req[28] ^ `TOP.cpu.sii_l2t6_req[29] ^ `TOP.cpu.sii_l2t6_req[30] ^ `TOP.cpu.sii_l2t6_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t6_req_vld,3))) && ($0in_delay(sii_l2t6_req[24] == 0,3)) && ($0in_delay(sii_l2t6_req[25] == 1,3)) && ($0in_delay(sii_l2t6_req[26] == 0,3)) && !(sii_wr8_ecc5_l6_cycle2 == sii_l2b6_ecc[5]))
      -clock l2clk
      -message "data ecc error for wr8 in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc5_l6_wr8_cycle2
*/

wire sii_wr8_ecc6_l6_cycle2 =  (`TOP.cpu.sii_l2t6_req[0] ^ `TOP.cpu.sii_l2t6_req[1] ^ `TOP.cpu.sii_l2t6_req[2] ^ `TOP.cpu.sii_l2t6_req[4] ^ `TOP.cpu.sii_l2t6_req[5] ^ `TOP.cpu.sii_l2t6_req[7] ^ `TOP.cpu.sii_l2t6_req[10] ^ `TOP.cpu.sii_l2t6_req[11] ^ `TOP.cpu.sii_l2t6_req[12] ^ `TOP.cpu.sii_l2t6_req[14] ^ `TOP.cpu.sii_l2t6_req[17] ^ `TOP.cpu.sii_l2t6_req[18] ^ `TOP.cpu.sii_l2t6_req[21] ^ `TOP.cpu.sii_l2t6_req[23] ^ `TOP.cpu.sii_l2t6_req[24] ^ `TOP.cpu.sii_l2t6_req[26] ^ `TOP.cpu.sii_l2t6_req[27] ^ `TOP.cpu.sii_l2t6_req[29] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t6_req_vld,3))) && ($0in_delay(sii_l2t6_req[24] == 0,3)) && ($0in_delay(sii_l2t6_req[25] == 1,3)) && ($0in_delay(sii_l2t6_req[26] == 0,3)) && !(sii_wr8_ecc6_l6_cycle2 == sii_l2b6_ecc[6]))
      -clock l2clk
      -message "data ecc error for wr8 in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc6_l6_wr8_cycle2
*/

wire sii_wr8_ecc0_l7_cycle1 =  (`TOP.cpu.sii_l2t7_req[0] ^ `TOP.cpu.sii_l2t7_req[1] ^ `TOP.cpu.sii_l2t7_req[3] ^ `TOP.cpu.sii_l2t7_req[4] ^ `TOP.cpu.sii_l2t7_req[6] ^ `TOP.cpu.sii_l2t7_req[8] ^ `TOP.cpu.sii_l2t7_req[10] ^ `TOP.cpu.sii_l2t7_req[11] ^ `TOP.cpu.sii_l2t7_req[13] ^ `TOP.cpu.sii_l2t7_req[15] ^ `TOP.cpu.sii_l2t7_req[17] ^ `TOP.cpu.sii_l2t7_req[19] ^ `TOP.cpu.sii_l2t7_req[21] ^ `TOP.cpu.sii_l2t7_req[23] ^ `TOP.cpu.sii_l2t7_req[25] ^ `TOP.cpu.sii_l2t7_req[26] ^ `TOP.cpu.sii_l2t7_req[28] ^ `TOP.cpu.sii_l2t7_req[30] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t7_req_vld,2))) && ($0in_delay(sii_l2t7_req[24] == 0,2)) && ($0in_delay(sii_l2t7_req[25] == 1,2)) && ($0in_delay(sii_l2t7_req[26] == 0,2)) && !(sii_wr8_ecc0_l7_cycle1 == sii_l2b7_ecc[0]))
      -clock l2clk
      -message "data ecc error for wr8 in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc0_l7_wr8_cycle1
*/

wire sii_wr8_ecc1_l7_cycle1 =  (`TOP.cpu.sii_l2t7_req[0] ^ `TOP.cpu.sii_l2t7_req[2] ^ `TOP.cpu.sii_l2t7_req[3] ^ `TOP.cpu.sii_l2t7_req[5] ^ `TOP.cpu.sii_l2t7_req[6] ^ `TOP.cpu.sii_l2t7_req[9] ^ `TOP.cpu.sii_l2t7_req[10] ^ `TOP.cpu.sii_l2t7_req[12] ^ `TOP.cpu.sii_l2t7_req[13] ^ `TOP.cpu.sii_l2t7_req[16] ^ `TOP.cpu.sii_l2t7_req[17] ^ `TOP.cpu.sii_l2t7_req[20] ^ `TOP.cpu.sii_l2t7_req[21] ^ `TOP.cpu.sii_l2t7_req[24] ^ `TOP.cpu.sii_l2t7_req[25] ^ `TOP.cpu.sii_l2t7_req[27] ^ `TOP.cpu.sii_l2t7_req[28] ^ `TOP.cpu.sii_l2t7_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t7_req_vld,2))) && ($0in_delay(sii_l2t7_req[24] == 0,2)) && ($0in_delay(sii_l2t7_req[25] == 1,2)) && ($0in_delay(sii_l2t7_req[26] == 0,2)) && !(sii_wr8_ecc1_l7_cycle1 == sii_l2b7_ecc[1]))
      -clock l2clk
      -message "data ecc error for wr8 in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc1_l7_wr8_cycle1
*/

wire sii_wr8_ecc2_l7_cycle1 =  (`TOP.cpu.sii_l2t7_req[1] ^ `TOP.cpu.sii_l2t7_req[2] ^ `TOP.cpu.sii_l2t7_req[3] ^ `TOP.cpu.sii_l2t7_req[7] ^ `TOP.cpu.sii_l2t7_req[8] ^ `TOP.cpu.sii_l2t7_req[9] ^ `TOP.cpu.sii_l2t7_req[10] ^ `TOP.cpu.sii_l2t7_req[14] ^ `TOP.cpu.sii_l2t7_req[15] ^ `TOP.cpu.sii_l2t7_req[16] ^ `TOP.cpu.sii_l2t7_req[17] ^ `TOP.cpu.sii_l2t7_req[22] ^ `TOP.cpu.sii_l2t7_req[23] ^ `TOP.cpu.sii_l2t7_req[24] ^ `TOP.cpu.sii_l2t7_req[25] ^ `TOP.cpu.sii_l2t7_req[29] ^ `TOP.cpu.sii_l2t7_req[30] ^ `TOP.cpu.sii_l2t7_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t7_req_vld,2))) && ($0in_delay(sii_l2t7_req[24] == 0,2)) && ($0in_delay(sii_l2t7_req[25] == 1,2)) && ($0in_delay(sii_l2t7_req[26] == 0,2)) && !(sii_wr8_ecc2_l7_cycle1 == sii_l2b7_ecc[2]))
      -clock l2clk
      -message "data ecc error for wr8 in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc2_l7_wr8_cycle1
*/

wire sii_wr8_ecc3_l7_cycle1 =  (`TOP.cpu.sii_l2t7_req[4] ^ `TOP.cpu.sii_l2t7_req[5] ^ `TOP.cpu.sii_l2t7_req[6] ^ `TOP.cpu.sii_l2t7_req[7] ^ `TOP.cpu.sii_l2t7_req[8] ^ `TOP.cpu.sii_l2t7_req[9] ^ `TOP.cpu.sii_l2t7_req[10] ^ `TOP.cpu.sii_l2t7_req[18] ^ `TOP.cpu.sii_l2t7_req[19] ^ `TOP.cpu.sii_l2t7_req[20] ^ `TOP.cpu.sii_l2t7_req[21] ^ `TOP.cpu.sii_l2t7_req[22] ^ `TOP.cpu.sii_l2t7_req[23] ^ `TOP.cpu.sii_l2t7_req[24] ^ `TOP.cpu.sii_l2t7_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t7_req_vld,2))) && ($0in_delay(sii_l2t7_req[24] == 0,2)) && ($0in_delay(sii_l2t7_req[25] == 1,2)) && ($0in_delay(sii_l2t7_req[26] == 0,2)) && !(sii_wr8_ecc3_l7_cycle1 == sii_l2b7_ecc[3]))
      -clock l2clk
      -message "data ecc error for wr8 in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc3_l7_wr8_cycle1
*/

wire sii_wr8_ecc4_l7_cycle1 =  ( `TOP.cpu.sii_l2t7_req[11] ^ `TOP.cpu.sii_l2t7_req[12] ^ `TOP.cpu.sii_l2t7_req[13] ^ `TOP.cpu.sii_l2t7_req[14] ^ `TOP.cpu.sii_l2t7_req[15] ^ `TOP.cpu.sii_l2t7_req[16] ^ `TOP.cpu.sii_l2t7_req[17] ^ `TOP.cpu.sii_l2t7_req[18] ^ `TOP.cpu.sii_l2t7_req[19] ^ `TOP.cpu.sii_l2t7_req[20] ^ `TOP.cpu.sii_l2t7_req[21] ^ `TOP.cpu.sii_l2t7_req[22] ^ `TOP.cpu.sii_l2t7_req[23] ^ `TOP.cpu.sii_l2t7_req[24] ^ `TOP.cpu.sii_l2t7_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t7_req_vld,2))) && ($0in_delay(sii_l2t7_req[24] == 0,2)) && ($0in_delay(sii_l2t7_req[25] == 1,2)) && ($0in_delay(sii_l2t7_req[26] == 0,2)) && !(sii_wr8_ecc4_l7_cycle1 == sii_l2b7_ecc[4]))
      -clock l2clk
      -message "data ecc error for wr8 in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc4_l7_wr8_cycle1
*/

wire sii_wr8_ecc5_l7_cycle1 =  (`TOP.cpu.sii_l2t7_req[26] ^ `TOP.cpu.sii_l2t7_req[27] ^ `TOP.cpu.sii_l2t7_req[28] ^ `TOP.cpu.sii_l2t7_req[29] ^ `TOP.cpu.sii_l2t7_req[30] ^ `TOP.cpu.sii_l2t7_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t7_req_vld,2))) && ($0in_delay(sii_l2t7_req[24] == 0,2)) && ($0in_delay(sii_l2t7_req[25] == 1,2)) && ($0in_delay(sii_l2t7_req[26] == 0,2)) && !(sii_wr8_ecc5_l7_cycle1 == sii_l2b7_ecc[5]))
      -clock l2clk
      -message "data ecc error for wr8 in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc5_l7_wr8_cycle1
*/

wire sii_wr8_ecc6_l7_cycle1 =  (`TOP.cpu.sii_l2t7_req[0] ^ `TOP.cpu.sii_l2t7_req[1] ^ `TOP.cpu.sii_l2t7_req[2] ^ `TOP.cpu.sii_l2t7_req[4] ^ `TOP.cpu.sii_l2t7_req[5] ^ `TOP.cpu.sii_l2t7_req[7] ^ `TOP.cpu.sii_l2t7_req[10] ^ `TOP.cpu.sii_l2t7_req[11] ^ `TOP.cpu.sii_l2t7_req[12] ^ `TOP.cpu.sii_l2t7_req[14] ^ `TOP.cpu.sii_l2t7_req[17] ^ `TOP.cpu.sii_l2t7_req[18] ^ `TOP.cpu.sii_l2t7_req[21] ^ `TOP.cpu.sii_l2t7_req[23] ^ `TOP.cpu.sii_l2t7_req[24] ^ `TOP.cpu.sii_l2t7_req[26] ^ `TOP.cpu.sii_l2t7_req[27] ^ `TOP.cpu.sii_l2t7_req[29] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t7_req_vld,2))) && ($0in_delay(sii_l2t7_req[24] == 0,2)) && ($0in_delay(sii_l2t7_req[25] == 1,2)) && ($0in_delay(sii_l2t7_req[26] == 0,2)) && !(sii_wr8_ecc6_l7_cycle1 == sii_l2b7_ecc[6]))
      -clock l2clk
      -message "data ecc error for wr8 in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc6_l7_wr8_cycle1
*/

wire sii_wr8_ecc0_l7_cycle2 =  (`TOP.cpu.sii_l2t7_req[0] ^ `TOP.cpu.sii_l2t7_req[1] ^ `TOP.cpu.sii_l2t7_req[3] ^ `TOP.cpu.sii_l2t7_req[4] ^ `TOP.cpu.sii_l2t7_req[6] ^ `TOP.cpu.sii_l2t7_req[8] ^ `TOP.cpu.sii_l2t7_req[10] ^ `TOP.cpu.sii_l2t7_req[11] ^ `TOP.cpu.sii_l2t7_req[13] ^ `TOP.cpu.sii_l2t7_req[15] ^ `TOP.cpu.sii_l2t7_req[17] ^ `TOP.cpu.sii_l2t7_req[19] ^ `TOP.cpu.sii_l2t7_req[21] ^ `TOP.cpu.sii_l2t7_req[23] ^ `TOP.cpu.sii_l2t7_req[25] ^ `TOP.cpu.sii_l2t7_req[26] ^ `TOP.cpu.sii_l2t7_req[28] ^ `TOP.cpu.sii_l2t7_req[30] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t7_req_vld,3))) && ($0in_delay(sii_l2t7_req[24] == 0,3)) && ($0in_delay(sii_l2t7_req[25] == 1,3)) && ($0in_delay(sii_l2t7_req[26] == 0,3)) && !(sii_wr8_ecc0_l7_cycle2 == sii_l2b7_ecc[0]))
      -clock l2clk
      -message "data ecc error for wr8 in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc0_l7_wr8_cycle2
*/

wire sii_wr8_ecc1_l7_cycle2 =  (`TOP.cpu.sii_l2t7_req[0] ^ `TOP.cpu.sii_l2t7_req[2] ^ `TOP.cpu.sii_l2t7_req[3] ^ `TOP.cpu.sii_l2t7_req[5] ^ `TOP.cpu.sii_l2t7_req[6] ^ `TOP.cpu.sii_l2t7_req[9] ^ `TOP.cpu.sii_l2t7_req[10] ^ `TOP.cpu.sii_l2t7_req[12] ^ `TOP.cpu.sii_l2t7_req[13] ^ `TOP.cpu.sii_l2t7_req[16] ^ `TOP.cpu.sii_l2t7_req[17] ^ `TOP.cpu.sii_l2t7_req[20] ^ `TOP.cpu.sii_l2t7_req[21] ^ `TOP.cpu.sii_l2t7_req[24] ^ `TOP.cpu.sii_l2t7_req[25] ^ `TOP.cpu.sii_l2t7_req[27] ^ `TOP.cpu.sii_l2t7_req[28] ^ `TOP.cpu.sii_l2t7_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t7_req_vld,3))) && ($0in_delay(sii_l2t7_req[24] == 0,3)) && ($0in_delay(sii_l2t7_req[25] == 1,3)) && ($0in_delay(sii_l2t7_req[26] == 0,3)) && !(sii_wr8_ecc1_l7_cycle2 == sii_l2b7_ecc[1]))
      -clock l2clk
      -message "data ecc error for wr8 in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc1_l7_wr8_cycle2
*/

wire sii_wr8_ecc2_l7_cycle2 =  (`TOP.cpu.sii_l2t7_req[1] ^ `TOP.cpu.sii_l2t7_req[2] ^ `TOP.cpu.sii_l2t7_req[3] ^ `TOP.cpu.sii_l2t7_req[7] ^ `TOP.cpu.sii_l2t7_req[8] ^ `TOP.cpu.sii_l2t7_req[9] ^ `TOP.cpu.sii_l2t7_req[10] ^ `TOP.cpu.sii_l2t7_req[14] ^ `TOP.cpu.sii_l2t7_req[15] ^ `TOP.cpu.sii_l2t7_req[16] ^ `TOP.cpu.sii_l2t7_req[17] ^ `TOP.cpu.sii_l2t7_req[22] ^ `TOP.cpu.sii_l2t7_req[23] ^ `TOP.cpu.sii_l2t7_req[24] ^ `TOP.cpu.sii_l2t7_req[25] ^ `TOP.cpu.sii_l2t7_req[29] ^ `TOP.cpu.sii_l2t7_req[30] ^ `TOP.cpu.sii_l2t7_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t7_req_vld,3))) && ($0in_delay(sii_l2t7_req[24] == 0,3)) && ($0in_delay(sii_l2t7_req[25] == 1,3)) && ($0in_delay(sii_l2t7_req[26] == 0,3)) && !(sii_wr8_ecc2_l7_cycle2 == sii_l2b7_ecc[2]))
      -clock l2clk
      -message "data ecc error for wr8 in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc2_l7_wr8_cycle2
*/

wire sii_wr8_ecc3_l7_cycle2 =  (`TOP.cpu.sii_l2t7_req[4] ^ `TOP.cpu.sii_l2t7_req[5] ^ `TOP.cpu.sii_l2t7_req[6] ^ `TOP.cpu.sii_l2t7_req[7] ^ `TOP.cpu.sii_l2t7_req[8] ^ `TOP.cpu.sii_l2t7_req[9] ^ `TOP.cpu.sii_l2t7_req[10] ^ `TOP.cpu.sii_l2t7_req[18] ^ `TOP.cpu.sii_l2t7_req[19] ^ `TOP.cpu.sii_l2t7_req[20] ^ `TOP.cpu.sii_l2t7_req[21] ^ `TOP.cpu.sii_l2t7_req[22] ^ `TOP.cpu.sii_l2t7_req[23] ^ `TOP.cpu.sii_l2t7_req[24] ^ `TOP.cpu.sii_l2t7_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t7_req_vld,3))) && ($0in_delay(sii_l2t7_req[24] == 0,3)) && ($0in_delay(sii_l2t7_req[25] == 1,3)) && ($0in_delay(sii_l2t7_req[26] == 0,3)) && !(sii_wr8_ecc3_l7_cycle2 == sii_l2b7_ecc[3]))
      -clock l2clk
      -message "data ecc error for wr8 in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc3_l7_wr8_cycle2
*/

wire sii_wr8_ecc4_l7_cycle2 =  ( `TOP.cpu.sii_l2t7_req[11] ^ `TOP.cpu.sii_l2t7_req[12] ^ `TOP.cpu.sii_l2t7_req[13] ^ `TOP.cpu.sii_l2t7_req[14] ^ `TOP.cpu.sii_l2t7_req[15] ^ `TOP.cpu.sii_l2t7_req[16] ^ `TOP.cpu.sii_l2t7_req[17] ^ `TOP.cpu.sii_l2t7_req[18] ^ `TOP.cpu.sii_l2t7_req[19] ^ `TOP.cpu.sii_l2t7_req[20] ^ `TOP.cpu.sii_l2t7_req[21] ^ `TOP.cpu.sii_l2t7_req[22] ^ `TOP.cpu.sii_l2t7_req[23] ^ `TOP.cpu.sii_l2t7_req[24] ^ `TOP.cpu.sii_l2t7_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t7_req_vld,3))) && ($0in_delay(sii_l2t7_req[24] == 0,3)) && ($0in_delay(sii_l2t7_req[25] == 1,3)) && ($0in_delay(sii_l2t7_req[26] == 0,3)) && !(sii_wr8_ecc4_l7_cycle2 == sii_l2b7_ecc[4]))
      -clock l2clk
      -message "data ecc error for wr8 in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc4_l7_wr8_cycle2
*/

wire sii_wr8_ecc5_l7_cycle2 =  (`TOP.cpu.sii_l2t7_req[26] ^ `TOP.cpu.sii_l2t7_req[27] ^ `TOP.cpu.sii_l2t7_req[28] ^ `TOP.cpu.sii_l2t7_req[29] ^ `TOP.cpu.sii_l2t7_req[30] ^ `TOP.cpu.sii_l2t7_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t7_req_vld,3))) && ($0in_delay(sii_l2t7_req[24] == 0,3)) && ($0in_delay(sii_l2t7_req[25] == 1,3)) && ($0in_delay(sii_l2t7_req[26] == 0,3)) && !(sii_wr8_ecc5_l7_cycle2 == sii_l2b7_ecc[5]))
      -clock l2clk
      -message "data ecc error for wr8 in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc5_l7_wr8_cycle2
*/

wire sii_wr8_ecc6_l7_cycle2 =  (`TOP.cpu.sii_l2t7_req[0] ^ `TOP.cpu.sii_l2t7_req[1] ^ `TOP.cpu.sii_l2t7_req[2] ^ `TOP.cpu.sii_l2t7_req[4] ^ `TOP.cpu.sii_l2t7_req[5] ^ `TOP.cpu.sii_l2t7_req[7] ^ `TOP.cpu.sii_l2t7_req[10] ^ `TOP.cpu.sii_l2t7_req[11] ^ `TOP.cpu.sii_l2t7_req[12] ^ `TOP.cpu.sii_l2t7_req[14] ^ `TOP.cpu.sii_l2t7_req[17] ^ `TOP.cpu.sii_l2t7_req[18] ^ `TOP.cpu.sii_l2t7_req[21] ^ `TOP.cpu.sii_l2t7_req[23] ^ `TOP.cpu.sii_l2t7_req[24] ^ `TOP.cpu.sii_l2t7_req[26] ^ `TOP.cpu.sii_l2t7_req[27] ^ `TOP.cpu.sii_l2t7_req[29] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t7_req_vld,3))) && ($0in_delay(sii_l2t7_req[24] == 0,3)) && ($0in_delay(sii_l2t7_req[25] == 1,3)) && ($0in_delay(sii_l2t7_req[26] == 0,3)) && !(sii_wr8_ecc6_l7_cycle2 == sii_l2b7_ecc[6]))
      -clock l2clk
      -message "data ecc error for wr8 in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc6_l7_wr8_cycle2
*/


/*************************************************************************
*
*  Check for data ecc checkers SII ->  L2
*  For WRI
*
**************************************************************************/

wire sii_wri_ecc0_l0_cycle1 =  (`TOP.cpu.sii_l2t0_req[0] ^ `TOP.cpu.sii_l2t0_req[1] ^ `TOP.cpu.sii_l2t0_req[3] ^ `TOP.cpu.sii_l2t0_req[4] ^ `TOP.cpu.sii_l2t0_req[6] ^ `TOP.cpu.sii_l2t0_req[8] ^ `TOP.cpu.sii_l2t0_req[10] ^ `TOP.cpu.sii_l2t0_req[11] ^ `TOP.cpu.sii_l2t0_req[13] ^ `TOP.cpu.sii_l2t0_req[15] ^ `TOP.cpu.sii_l2t0_req[17] ^ `TOP.cpu.sii_l2t0_req[19] ^ `TOP.cpu.sii_l2t0_req[21] ^ `TOP.cpu.sii_l2t0_req[23] ^ `TOP.cpu.sii_l2t0_req[25] ^ `TOP.cpu.sii_l2t0_req[26] ^ `TOP.cpu.sii_l2t0_req[28] ^ `TOP.cpu.sii_l2t0_req[30] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t0_req_vld,2))) && ($0in_delay(sii_l2t0_req[24] == 0,2)) && ($0in_delay(sii_l2t0_req[25] == 0,2)) && ($0in_delay(sii_l2t0_req[26] == 1,2)) && ($0in_rising_edge($0in_delay(l2t0_sii_iq_dequeue,2))) && !(sii_wri_ecc0_l0_cycle1 == sii_l2b0_ecc[0]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc0_l0_wri_cycle1
*/

wire sii_wri_ecc1_l0_cycle1 =  (`TOP.cpu.sii_l2t0_req[0] ^ `TOP.cpu.sii_l2t0_req[2] ^ `TOP.cpu.sii_l2t0_req[3] ^ `TOP.cpu.sii_l2t0_req[5] ^ `TOP.cpu.sii_l2t0_req[6] ^ `TOP.cpu.sii_l2t0_req[9] ^ `TOP.cpu.sii_l2t0_req[10] ^ `TOP.cpu.sii_l2t0_req[12] ^ `TOP.cpu.sii_l2t0_req[13] ^ `TOP.cpu.sii_l2t0_req[16] ^ `TOP.cpu.sii_l2t0_req[17] ^ `TOP.cpu.sii_l2t0_req[20] ^ `TOP.cpu.sii_l2t0_req[21] ^ `TOP.cpu.sii_l2t0_req[24] ^ `TOP.cpu.sii_l2t0_req[25] ^ `TOP.cpu.sii_l2t0_req[27] ^ `TOP.cpu.sii_l2t0_req[28] ^ `TOP.cpu.sii_l2t0_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t0_req_vld,2))) && ($0in_delay(sii_l2t0_req[24] == 0,2)) && ($0in_delay(sii_l2t0_req[25] == 0,2)) && ($0in_delay(sii_l2t0_req[26] == 1,2)) && ($0in_rising_edge($0in_delay(l2t0_sii_iq_dequeue,2))) && !(sii_wri_ecc1_l0_cycle1 == sii_l2b0_ecc[1]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc1_l0_wri_cycle1
*/

wire sii_wri_ecc2_l0_cycle1 =  (`TOP.cpu.sii_l2t0_req[1] ^ `TOP.cpu.sii_l2t0_req[2] ^ `TOP.cpu.sii_l2t0_req[3] ^ `TOP.cpu.sii_l2t0_req[7] ^ `TOP.cpu.sii_l2t0_req[8] ^ `TOP.cpu.sii_l2t0_req[9] ^ `TOP.cpu.sii_l2t0_req[10] ^ `TOP.cpu.sii_l2t0_req[14] ^ `TOP.cpu.sii_l2t0_req[15] ^ `TOP.cpu.sii_l2t0_req[16] ^ `TOP.cpu.sii_l2t0_req[17] ^ `TOP.cpu.sii_l2t0_req[22] ^ `TOP.cpu.sii_l2t0_req[23] ^ `TOP.cpu.sii_l2t0_req[24] ^ `TOP.cpu.sii_l2t0_req[25] ^ `TOP.cpu.sii_l2t0_req[29] ^ `TOP.cpu.sii_l2t0_req[30] ^ `TOP.cpu.sii_l2t0_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t0_req_vld,2))) && ($0in_delay(sii_l2t0_req[24] == 0,2)) && ($0in_delay(sii_l2t0_req[25] == 0,2)) && ($0in_delay(sii_l2t0_req[26] == 1,2)) && ($0in_rising_edge($0in_delay(l2t0_sii_iq_dequeue,2))) && !(sii_wri_ecc2_l0_cycle1 == sii_l2b0_ecc[2]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc2_l0_wri_cycle1
*/

wire sii_wri_ecc3_l0_cycle1 =  (`TOP.cpu.sii_l2t0_req[4] ^ `TOP.cpu.sii_l2t0_req[5] ^ `TOP.cpu.sii_l2t0_req[6] ^ `TOP.cpu.sii_l2t0_req[7] ^ `TOP.cpu.sii_l2t0_req[8] ^ `TOP.cpu.sii_l2t0_req[9] ^ `TOP.cpu.sii_l2t0_req[10] ^ `TOP.cpu.sii_l2t0_req[18] ^ `TOP.cpu.sii_l2t0_req[19] ^ `TOP.cpu.sii_l2t0_req[20] ^ `TOP.cpu.sii_l2t0_req[21] ^ `TOP.cpu.sii_l2t0_req[22] ^ `TOP.cpu.sii_l2t0_req[23] ^ `TOP.cpu.sii_l2t0_req[24] ^ `TOP.cpu.sii_l2t0_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t0_req_vld,2))) && ($0in_delay(sii_l2t0_req[24] == 0,2)) && ($0in_delay(sii_l2t0_req[25] == 0,2)) && ($0in_delay(sii_l2t0_req[26] == 1,2)) && ($0in_rising_edge($0in_delay(l2t0_sii_iq_dequeue,2))) && !(sii_wri_ecc3_l0_cycle1 == sii_l2b0_ecc[3]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc3_l0_wri_cycle1
*/

wire sii_wri_ecc4_l0_cycle1 =  ( `TOP.cpu.sii_l2t0_req[11] ^ `TOP.cpu.sii_l2t0_req[12] ^ `TOP.cpu.sii_l2t0_req[13] ^ `TOP.cpu.sii_l2t0_req[14] ^ `TOP.cpu.sii_l2t0_req[15] ^ `TOP.cpu.sii_l2t0_req[16] ^ `TOP.cpu.sii_l2t0_req[17] ^ `TOP.cpu.sii_l2t0_req[18] ^ `TOP.cpu.sii_l2t0_req[19] ^ `TOP.cpu.sii_l2t0_req[20] ^ `TOP.cpu.sii_l2t0_req[21] ^ `TOP.cpu.sii_l2t0_req[22] ^ `TOP.cpu.sii_l2t0_req[23] ^ `TOP.cpu.sii_l2t0_req[24] ^ `TOP.cpu.sii_l2t0_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t0_req_vld,2))) && ($0in_delay(sii_l2t0_req[24] == 0,2)) && ($0in_delay(sii_l2t0_req[25] == 0,2)) && ($0in_delay(sii_l2t0_req[26] == 1,2)) && ($0in_rising_edge($0in_delay(l2t0_sii_iq_dequeue,2))) && !(sii_wri_ecc4_l0_cycle1 == sii_l2b0_ecc[4]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc4_l0_wri_cycle1
*/

wire sii_wri_ecc5_l0_cycle1 =  (`TOP.cpu.sii_l2t0_req[26] ^ `TOP.cpu.sii_l2t0_req[27] ^ `TOP.cpu.sii_l2t0_req[28] ^ `TOP.cpu.sii_l2t0_req[29] ^ `TOP.cpu.sii_l2t0_req[30] ^ `TOP.cpu.sii_l2t0_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t0_req_vld,2))) && ($0in_delay(sii_l2t0_req[24] == 0,2)) && ($0in_delay(sii_l2t0_req[25] == 0,2)) && ($0in_delay(sii_l2t0_req[26] == 1,2)) && ($0in_rising_edge($0in_delay(l2t0_sii_iq_dequeue,2))) && !(sii_wri_ecc5_l0_cycle1 == sii_l2b0_ecc[5]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc5_l0_wri_cycle1
*/

wire sii_wri_ecc6_l0_cycle1 =  (`TOP.cpu.sii_l2t0_req[0] ^ `TOP.cpu.sii_l2t0_req[1] ^ `TOP.cpu.sii_l2t0_req[2] ^ `TOP.cpu.sii_l2t0_req[4] ^ `TOP.cpu.sii_l2t0_req[5] ^ `TOP.cpu.sii_l2t0_req[7] ^ `TOP.cpu.sii_l2t0_req[10] ^ `TOP.cpu.sii_l2t0_req[11] ^ `TOP.cpu.sii_l2t0_req[12] ^ `TOP.cpu.sii_l2t0_req[14] ^ `TOP.cpu.sii_l2t0_req[17] ^ `TOP.cpu.sii_l2t0_req[18] ^ `TOP.cpu.sii_l2t0_req[21] ^ `TOP.cpu.sii_l2t0_req[23] ^ `TOP.cpu.sii_l2t0_req[24] ^ `TOP.cpu.sii_l2t0_req[26] ^ `TOP.cpu.sii_l2t0_req[27] ^ `TOP.cpu.sii_l2t0_req[29] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t0_req_vld,2))) && ($0in_delay(sii_l2t0_req[24] == 0,2)) && ($0in_delay(sii_l2t0_req[25] == 0,2)) && ($0in_delay(sii_l2t0_req[26] == 1,2)) && ($0in_rising_edge($0in_delay(l2t0_sii_iq_dequeue,2))) && !(sii_wri_ecc6_l0_cycle1 == sii_l2b0_ecc[6]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc6_l0_wri_cycle1
*/

wire sii_wri_ecc0_l0_cycle2 =  (`TOP.cpu.sii_l2t0_req[0] ^ `TOP.cpu.sii_l2t0_req[1] ^ `TOP.cpu.sii_l2t0_req[3] ^ `TOP.cpu.sii_l2t0_req[4] ^ `TOP.cpu.sii_l2t0_req[6] ^ `TOP.cpu.sii_l2t0_req[8] ^ `TOP.cpu.sii_l2t0_req[10] ^ `TOP.cpu.sii_l2t0_req[11] ^ `TOP.cpu.sii_l2t0_req[13] ^ `TOP.cpu.sii_l2t0_req[15] ^ `TOP.cpu.sii_l2t0_req[17] ^ `TOP.cpu.sii_l2t0_req[19] ^ `TOP.cpu.sii_l2t0_req[21] ^ `TOP.cpu.sii_l2t0_req[23] ^ `TOP.cpu.sii_l2t0_req[25] ^ `TOP.cpu.sii_l2t0_req[26] ^ `TOP.cpu.sii_l2t0_req[28] ^ `TOP.cpu.sii_l2t0_req[30] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t0_req_vld,3))) && ($0in_delay(sii_l2t0_req[24] == 0,3)) && ($0in_delay(sii_l2t0_req[25] == 0,3)) && ($0in_delay(sii_l2t0_req[26] == 1,3)) && ($0in_rising_edge($0in_delay(l2t0_sii_iq_dequeue,3))) && !(sii_wri_ecc0_l0_cycle2 == sii_l2b0_ecc[0]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc0_l0_wri_cycle2
*/

wire sii_wri_ecc1_l0_cycle2 =  (`TOP.cpu.sii_l2t0_req[0] ^ `TOP.cpu.sii_l2t0_req[2] ^ `TOP.cpu.sii_l2t0_req[3] ^ `TOP.cpu.sii_l2t0_req[5] ^ `TOP.cpu.sii_l2t0_req[6] ^ `TOP.cpu.sii_l2t0_req[9] ^ `TOP.cpu.sii_l2t0_req[10] ^ `TOP.cpu.sii_l2t0_req[12] ^ `TOP.cpu.sii_l2t0_req[13] ^ `TOP.cpu.sii_l2t0_req[16] ^ `TOP.cpu.sii_l2t0_req[17] ^ `TOP.cpu.sii_l2t0_req[20] ^ `TOP.cpu.sii_l2t0_req[21] ^ `TOP.cpu.sii_l2t0_req[24] ^ `TOP.cpu.sii_l2t0_req[25] ^ `TOP.cpu.sii_l2t0_req[27] ^ `TOP.cpu.sii_l2t0_req[28] ^ `TOP.cpu.sii_l2t0_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t0_req_vld,3))) && ($0in_delay(sii_l2t0_req[24] == 0,3)) && ($0in_delay(sii_l2t0_req[25] == 0,3)) && ($0in_delay(sii_l2t0_req[26] == 1,3)) && ($0in_rising_edge($0in_delay(l2t0_sii_iq_dequeue,3))) && !(sii_wri_ecc1_l0_cycle2 == sii_l2b0_ecc[1]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc1_l0_wri_cycle2
*/

wire sii_wri_ecc2_l0_cycle2 =  (`TOP.cpu.sii_l2t0_req[1] ^ `TOP.cpu.sii_l2t0_req[2] ^ `TOP.cpu.sii_l2t0_req[3] ^ `TOP.cpu.sii_l2t0_req[7] ^ `TOP.cpu.sii_l2t0_req[8] ^ `TOP.cpu.sii_l2t0_req[9] ^ `TOP.cpu.sii_l2t0_req[10] ^ `TOP.cpu.sii_l2t0_req[14] ^ `TOP.cpu.sii_l2t0_req[15] ^ `TOP.cpu.sii_l2t0_req[16] ^ `TOP.cpu.sii_l2t0_req[17] ^ `TOP.cpu.sii_l2t0_req[22] ^ `TOP.cpu.sii_l2t0_req[23] ^ `TOP.cpu.sii_l2t0_req[24] ^ `TOP.cpu.sii_l2t0_req[25] ^ `TOP.cpu.sii_l2t0_req[29] ^ `TOP.cpu.sii_l2t0_req[30] ^ `TOP.cpu.sii_l2t0_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t0_req_vld,3))) && ($0in_delay(sii_l2t0_req[24] == 0,3)) && ($0in_delay(sii_l2t0_req[25] == 0,3)) && ($0in_delay(sii_l2t0_req[26] == 1,3)) && ($0in_rising_edge($0in_delay(l2t0_sii_iq_dequeue,3))) && !(sii_wri_ecc2_l0_cycle2 == sii_l2b0_ecc[2]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc2_l0_wri_cycle2
*/

wire sii_wri_ecc3_l0_cycle2 =  (`TOP.cpu.sii_l2t0_req[4] ^ `TOP.cpu.sii_l2t0_req[5] ^ `TOP.cpu.sii_l2t0_req[6] ^ `TOP.cpu.sii_l2t0_req[7] ^ `TOP.cpu.sii_l2t0_req[8] ^ `TOP.cpu.sii_l2t0_req[9] ^ `TOP.cpu.sii_l2t0_req[10] ^ `TOP.cpu.sii_l2t0_req[18] ^ `TOP.cpu.sii_l2t0_req[19] ^ `TOP.cpu.sii_l2t0_req[20] ^ `TOP.cpu.sii_l2t0_req[21] ^ `TOP.cpu.sii_l2t0_req[22] ^ `TOP.cpu.sii_l2t0_req[23] ^ `TOP.cpu.sii_l2t0_req[24] ^ `TOP.cpu.sii_l2t0_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t0_req_vld,3))) && ($0in_delay(sii_l2t0_req[24] == 0,3)) && ($0in_delay(sii_l2t0_req[25] == 0,3)) && ($0in_delay(sii_l2t0_req[26] == 1,3)) && ($0in_rising_edge($0in_delay(l2t0_sii_iq_dequeue,3))) && !(sii_wri_ecc3_l0_cycle2 == sii_l2b0_ecc[3]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc3_l0_wri_cycle2
*/

wire sii_wri_ecc4_l0_cycle2 =  ( `TOP.cpu.sii_l2t0_req[11] ^ `TOP.cpu.sii_l2t0_req[12] ^ `TOP.cpu.sii_l2t0_req[13] ^ `TOP.cpu.sii_l2t0_req[14] ^ `TOP.cpu.sii_l2t0_req[15] ^ `TOP.cpu.sii_l2t0_req[16] ^ `TOP.cpu.sii_l2t0_req[17] ^ `TOP.cpu.sii_l2t0_req[18] ^ `TOP.cpu.sii_l2t0_req[19] ^ `TOP.cpu.sii_l2t0_req[20] ^ `TOP.cpu.sii_l2t0_req[21] ^ `TOP.cpu.sii_l2t0_req[22] ^ `TOP.cpu.sii_l2t0_req[23] ^ `TOP.cpu.sii_l2t0_req[24] ^ `TOP.cpu.sii_l2t0_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t0_req_vld,3))) && ($0in_delay(sii_l2t0_req[24] == 0,3)) && ($0in_delay(sii_l2t0_req[25] == 0,3)) && ($0in_delay(sii_l2t0_req[26] == 1,3)) && ($0in_rising_edge($0in_delay(l2t0_sii_iq_dequeue,3))) && !(sii_wri_ecc4_l0_cycle2 == sii_l2b0_ecc[4]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc4_l0_wri_cycle2
*/

wire sii_wri_ecc5_l0_cycle2 =  (`TOP.cpu.sii_l2t0_req[26] ^ `TOP.cpu.sii_l2t0_req[27] ^ `TOP.cpu.sii_l2t0_req[28] ^ `TOP.cpu.sii_l2t0_req[29] ^ `TOP.cpu.sii_l2t0_req[30] ^ `TOP.cpu.sii_l2t0_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t0_req_vld,3))) && ($0in_delay(sii_l2t0_req[24] == 0,3)) && ($0in_delay(sii_l2t0_req[25] == 0,3)) && ($0in_delay(sii_l2t0_req[26] == 1,3)) && ($0in_rising_edge($0in_delay(l2t0_sii_iq_dequeue,3))) && !(sii_wri_ecc5_l0_cycle2 == sii_l2b0_ecc[5]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc5_l0_wri_cycle2
*/

wire sii_wri_ecc6_l0_cycle2 =  (`TOP.cpu.sii_l2t0_req[0] ^ `TOP.cpu.sii_l2t0_req[1] ^ `TOP.cpu.sii_l2t0_req[2] ^ `TOP.cpu.sii_l2t0_req[4] ^ `TOP.cpu.sii_l2t0_req[5] ^ `TOP.cpu.sii_l2t0_req[7] ^ `TOP.cpu.sii_l2t0_req[10] ^ `TOP.cpu.sii_l2t0_req[11] ^ `TOP.cpu.sii_l2t0_req[12] ^ `TOP.cpu.sii_l2t0_req[14] ^ `TOP.cpu.sii_l2t0_req[17] ^ `TOP.cpu.sii_l2t0_req[18] ^ `TOP.cpu.sii_l2t0_req[21] ^ `TOP.cpu.sii_l2t0_req[23] ^ `TOP.cpu.sii_l2t0_req[24] ^ `TOP.cpu.sii_l2t0_req[26] ^ `TOP.cpu.sii_l2t0_req[27] ^ `TOP.cpu.sii_l2t0_req[29] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t0_req_vld,3))) && ($0in_delay(sii_l2t0_req[24] == 0,3)) && ($0in_delay(sii_l2t0_req[25] == 0,3)) && ($0in_delay(sii_l2t0_req[26] == 1,3)) && ($0in_rising_edge($0in_delay(l2t0_sii_iq_dequeue,3))) && !(sii_wri_ecc6_l0_cycle2 == sii_l2b0_ecc[6]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc6_l0_wri_cycle2
*/

wire sii_wri_ecc0_l0_cycle3 =  (`TOP.cpu.sii_l2t0_req[0] ^ `TOP.cpu.sii_l2t0_req[1] ^ `TOP.cpu.sii_l2t0_req[3] ^ `TOP.cpu.sii_l2t0_req[4] ^ `TOP.cpu.sii_l2t0_req[6] ^ `TOP.cpu.sii_l2t0_req[8] ^ `TOP.cpu.sii_l2t0_req[10] ^ `TOP.cpu.sii_l2t0_req[11] ^ `TOP.cpu.sii_l2t0_req[13] ^ `TOP.cpu.sii_l2t0_req[15] ^ `TOP.cpu.sii_l2t0_req[17] ^ `TOP.cpu.sii_l2t0_req[19] ^ `TOP.cpu.sii_l2t0_req[21] ^ `TOP.cpu.sii_l2t0_req[23] ^ `TOP.cpu.sii_l2t0_req[25] ^ `TOP.cpu.sii_l2t0_req[26] ^ `TOP.cpu.sii_l2t0_req[28] ^ `TOP.cpu.sii_l2t0_req[30] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t0_req_vld,4))) && ($0in_delay(sii_l2t0_req[24] == 0,4)) && ($0in_delay(sii_l2t0_req[25] == 0,4)) && ($0in_delay(sii_l2t0_req[26] == 1,4)) && ($0in_rising_edge($0in_delay(l2t0_sii_iq_dequeue,4))) && !(sii_wri_ecc0_l0_cycle3 == sii_l2b0_ecc[0]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc0_l0_wri_cycle3
*/

wire sii_wri_ecc1_l0_cycle3 =  (`TOP.cpu.sii_l2t0_req[0] ^ `TOP.cpu.sii_l2t0_req[2] ^ `TOP.cpu.sii_l2t0_req[3] ^ `TOP.cpu.sii_l2t0_req[5] ^ `TOP.cpu.sii_l2t0_req[6] ^ `TOP.cpu.sii_l2t0_req[9] ^ `TOP.cpu.sii_l2t0_req[10] ^ `TOP.cpu.sii_l2t0_req[12] ^ `TOP.cpu.sii_l2t0_req[13] ^ `TOP.cpu.sii_l2t0_req[16] ^ `TOP.cpu.sii_l2t0_req[17] ^ `TOP.cpu.sii_l2t0_req[20] ^ `TOP.cpu.sii_l2t0_req[21] ^ `TOP.cpu.sii_l2t0_req[24] ^ `TOP.cpu.sii_l2t0_req[25] ^ `TOP.cpu.sii_l2t0_req[27] ^ `TOP.cpu.sii_l2t0_req[28] ^ `TOP.cpu.sii_l2t0_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t0_req_vld,4))) && ($0in_delay(sii_l2t0_req[24] == 0,4)) && ($0in_delay(sii_l2t0_req[25] == 0,4)) && ($0in_delay(sii_l2t0_req[26] == 1,4)) && ($0in_rising_edge($0in_delay(l2t0_sii_iq_dequeue,4))) && !(sii_wri_ecc1_l0_cycle3 == sii_l2b0_ecc[1]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc1_l0_wri_cycle3
*/

wire sii_wri_ecc2_l0_cycle3 =  (`TOP.cpu.sii_l2t0_req[1] ^ `TOP.cpu.sii_l2t0_req[2] ^ `TOP.cpu.sii_l2t0_req[3] ^ `TOP.cpu.sii_l2t0_req[7] ^ `TOP.cpu.sii_l2t0_req[8] ^ `TOP.cpu.sii_l2t0_req[9] ^ `TOP.cpu.sii_l2t0_req[10] ^ `TOP.cpu.sii_l2t0_req[14] ^ `TOP.cpu.sii_l2t0_req[15] ^ `TOP.cpu.sii_l2t0_req[16] ^ `TOP.cpu.sii_l2t0_req[17] ^ `TOP.cpu.sii_l2t0_req[22] ^ `TOP.cpu.sii_l2t0_req[23] ^ `TOP.cpu.sii_l2t0_req[24] ^ `TOP.cpu.sii_l2t0_req[25] ^ `TOP.cpu.sii_l2t0_req[29] ^ `TOP.cpu.sii_l2t0_req[30] ^ `TOP.cpu.sii_l2t0_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t0_req_vld,4))) && ($0in_delay(sii_l2t0_req[24] == 0,4)) && ($0in_delay(sii_l2t0_req[25] == 0,4)) && ($0in_delay(sii_l2t0_req[26] == 1,4)) && ($0in_rising_edge($0in_delay(l2t0_sii_iq_dequeue,4))) && !(sii_wri_ecc2_l0_cycle3 == sii_l2b0_ecc[2]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc2_l0_wri_cycle3
*/

wire sii_wri_ecc3_l0_cycle3 =  (`TOP.cpu.sii_l2t0_req[4] ^ `TOP.cpu.sii_l2t0_req[5] ^ `TOP.cpu.sii_l2t0_req[6] ^ `TOP.cpu.sii_l2t0_req[7] ^ `TOP.cpu.sii_l2t0_req[8] ^ `TOP.cpu.sii_l2t0_req[9] ^ `TOP.cpu.sii_l2t0_req[10] ^ `TOP.cpu.sii_l2t0_req[18] ^ `TOP.cpu.sii_l2t0_req[19] ^ `TOP.cpu.sii_l2t0_req[20] ^ `TOP.cpu.sii_l2t0_req[21] ^ `TOP.cpu.sii_l2t0_req[22] ^ `TOP.cpu.sii_l2t0_req[23] ^ `TOP.cpu.sii_l2t0_req[24] ^ `TOP.cpu.sii_l2t0_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t0_req_vld,4))) && ($0in_delay(sii_l2t0_req[24] == 0,4)) && ($0in_delay(sii_l2t0_req[25] == 0,4)) && ($0in_delay(sii_l2t0_req[26] == 1,4)) && ($0in_rising_edge($0in_delay(l2t0_sii_iq_dequeue,4))) && !(sii_wri_ecc3_l0_cycle3 == sii_l2b0_ecc[3]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc3_l0_wri_cycle3
*/

wire sii_wri_ecc4_l0_cycle3 =  ( `TOP.cpu.sii_l2t0_req[11] ^ `TOP.cpu.sii_l2t0_req[12] ^ `TOP.cpu.sii_l2t0_req[13] ^ `TOP.cpu.sii_l2t0_req[14] ^ `TOP.cpu.sii_l2t0_req[15] ^ `TOP.cpu.sii_l2t0_req[16] ^ `TOP.cpu.sii_l2t0_req[17] ^ `TOP.cpu.sii_l2t0_req[18] ^ `TOP.cpu.sii_l2t0_req[19] ^ `TOP.cpu.sii_l2t0_req[20] ^ `TOP.cpu.sii_l2t0_req[21] ^ `TOP.cpu.sii_l2t0_req[22] ^ `TOP.cpu.sii_l2t0_req[23] ^ `TOP.cpu.sii_l2t0_req[24] ^ `TOP.cpu.sii_l2t0_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t0_req_vld,4))) && ($0in_delay(sii_l2t0_req[24] == 0,4)) && ($0in_delay(sii_l2t0_req[25] == 0,4)) && ($0in_delay(sii_l2t0_req[26] == 1,4)) && ($0in_rising_edge($0in_delay(l2t0_sii_iq_dequeue,4))) && !(sii_wri_ecc4_l0_cycle3 == sii_l2b0_ecc[4]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc4_l0_wri_cycle3
*/

wire sii_wri_ecc5_l0_cycle3 =  (`TOP.cpu.sii_l2t0_req[26] ^ `TOP.cpu.sii_l2t0_req[27] ^ `TOP.cpu.sii_l2t0_req[28] ^ `TOP.cpu.sii_l2t0_req[29] ^ `TOP.cpu.sii_l2t0_req[30] ^ `TOP.cpu.sii_l2t0_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t0_req_vld,4))) && ($0in_delay(sii_l2t0_req[24] == 0,4)) && ($0in_delay(sii_l2t0_req[25] == 0,4)) && ($0in_delay(sii_l2t0_req[26] == 1,4)) && ($0in_rising_edge($0in_delay(l2t0_sii_iq_dequeue,4))) && !(sii_wri_ecc5_l0_cycle3 == sii_l2b0_ecc[5]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc5_l0_wri_cycle3
*/

wire sii_wri_ecc6_l0_cycle3 =  (`TOP.cpu.sii_l2t0_req[0] ^ `TOP.cpu.sii_l2t0_req[1] ^ `TOP.cpu.sii_l2t0_req[2] ^ `TOP.cpu.sii_l2t0_req[4] ^ `TOP.cpu.sii_l2t0_req[5] ^ `TOP.cpu.sii_l2t0_req[7] ^ `TOP.cpu.sii_l2t0_req[10] ^ `TOP.cpu.sii_l2t0_req[11] ^ `TOP.cpu.sii_l2t0_req[12] ^ `TOP.cpu.sii_l2t0_req[14] ^ `TOP.cpu.sii_l2t0_req[17] ^ `TOP.cpu.sii_l2t0_req[18] ^ `TOP.cpu.sii_l2t0_req[21] ^ `TOP.cpu.sii_l2t0_req[23] ^ `TOP.cpu.sii_l2t0_req[24] ^ `TOP.cpu.sii_l2t0_req[26] ^ `TOP.cpu.sii_l2t0_req[27] ^ `TOP.cpu.sii_l2t0_req[29] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t0_req_vld,4))) && ($0in_delay(sii_l2t0_req[24] == 0,4)) && ($0in_delay(sii_l2t0_req[25] == 0,2)) && ($0in_delay(sii_l2t0_req[26] == 1,4)) && ($0in_rising_edge($0in_delay(l2t0_sii_iq_dequeue,4))) && !(sii_wri_ecc6_l0_cycle3 == sii_l2b0_ecc[6]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc6_l0_wri_cycle3
*/

wire sii_wri_ecc0_l0_cycle4 =  (`TOP.cpu.sii_l2t0_req[0] ^ `TOP.cpu.sii_l2t0_req[1] ^ `TOP.cpu.sii_l2t0_req[3] ^ `TOP.cpu.sii_l2t0_req[4] ^ `TOP.cpu.sii_l2t0_req[6] ^ `TOP.cpu.sii_l2t0_req[8] ^ `TOP.cpu.sii_l2t0_req[10] ^ `TOP.cpu.sii_l2t0_req[11] ^ `TOP.cpu.sii_l2t0_req[13] ^ `TOP.cpu.sii_l2t0_req[15] ^ `TOP.cpu.sii_l2t0_req[17] ^ `TOP.cpu.sii_l2t0_req[19] ^ `TOP.cpu.sii_l2t0_req[21] ^ `TOP.cpu.sii_l2t0_req[23] ^ `TOP.cpu.sii_l2t0_req[25] ^ `TOP.cpu.sii_l2t0_req[26] ^ `TOP.cpu.sii_l2t0_req[28] ^ `TOP.cpu.sii_l2t0_req[30] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t0_req_vld,5))) && ($0in_delay(sii_l2t0_req[24] == 0,5)) && ($0in_delay(sii_l2t0_req[25] == 0,5)) && ($0in_delay(sii_l2t0_req[26] == 1,5)) && ($0in_rising_edge($0in_delay(l2t0_sii_iq_dequeue,5))) && !(sii_wri_ecc0_l0_cycle4 == sii_l2b0_ecc[0]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc0_l0_wri_cycle4
*/

wire sii_wri_ecc1_l0_cycle4 =  (`TOP.cpu.sii_l2t0_req[0] ^ `TOP.cpu.sii_l2t0_req[2] ^ `TOP.cpu.sii_l2t0_req[3] ^ `TOP.cpu.sii_l2t0_req[5] ^ `TOP.cpu.sii_l2t0_req[6] ^ `TOP.cpu.sii_l2t0_req[9] ^ `TOP.cpu.sii_l2t0_req[10] ^ `TOP.cpu.sii_l2t0_req[12] ^ `TOP.cpu.sii_l2t0_req[13] ^ `TOP.cpu.sii_l2t0_req[16] ^ `TOP.cpu.sii_l2t0_req[17] ^ `TOP.cpu.sii_l2t0_req[20] ^ `TOP.cpu.sii_l2t0_req[21] ^ `TOP.cpu.sii_l2t0_req[24] ^ `TOP.cpu.sii_l2t0_req[25] ^ `TOP.cpu.sii_l2t0_req[27] ^ `TOP.cpu.sii_l2t0_req[28] ^ `TOP.cpu.sii_l2t0_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t0_req_vld,5))) && ($0in_delay(sii_l2t0_req[24] == 0,5)) && ($0in_delay(sii_l2t0_req[25] == 0,5)) && ($0in_delay(sii_l2t0_req[26] == 1,5)) && ($0in_rising_edge($0in_delay(l2t0_sii_iq_dequeue,5))) && !(sii_wri_ecc1_l0_cycle4 == sii_l2b0_ecc[1]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc1_l0_wri_cycle4
*/

wire sii_wri_ecc2_l0_cycle4 =  (`TOP.cpu.sii_l2t0_req[1] ^ `TOP.cpu.sii_l2t0_req[2] ^ `TOP.cpu.sii_l2t0_req[3] ^ `TOP.cpu.sii_l2t0_req[7] ^ `TOP.cpu.sii_l2t0_req[8] ^ `TOP.cpu.sii_l2t0_req[9] ^ `TOP.cpu.sii_l2t0_req[10] ^ `TOP.cpu.sii_l2t0_req[14] ^ `TOP.cpu.sii_l2t0_req[15] ^ `TOP.cpu.sii_l2t0_req[16] ^ `TOP.cpu.sii_l2t0_req[17] ^ `TOP.cpu.sii_l2t0_req[22] ^ `TOP.cpu.sii_l2t0_req[23] ^ `TOP.cpu.sii_l2t0_req[24] ^ `TOP.cpu.sii_l2t0_req[25] ^ `TOP.cpu.sii_l2t0_req[29] ^ `TOP.cpu.sii_l2t0_req[30] ^ `TOP.cpu.sii_l2t0_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t0_req_vld,5))) && ($0in_delay(sii_l2t0_req[24] == 0,5)) && ($0in_delay(sii_l2t0_req[25] == 0,5)) && ($0in_delay(sii_l2t0_req[26] == 1,5)) && ($0in_rising_edge($0in_delay(l2t0_sii_iq_dequeue,5))) && !(sii_wri_ecc2_l0_cycle4 == sii_l2b0_ecc[2]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc2_l0_wri_cycle4
*/

wire sii_wri_ecc3_l0_cycle4 =  (`TOP.cpu.sii_l2t0_req[4] ^ `TOP.cpu.sii_l2t0_req[5] ^ `TOP.cpu.sii_l2t0_req[6] ^ `TOP.cpu.sii_l2t0_req[7] ^ `TOP.cpu.sii_l2t0_req[8] ^ `TOP.cpu.sii_l2t0_req[9] ^ `TOP.cpu.sii_l2t0_req[10] ^ `TOP.cpu.sii_l2t0_req[18] ^ `TOP.cpu.sii_l2t0_req[19] ^ `TOP.cpu.sii_l2t0_req[20] ^ `TOP.cpu.sii_l2t0_req[21] ^ `TOP.cpu.sii_l2t0_req[22] ^ `TOP.cpu.sii_l2t0_req[23] ^ `TOP.cpu.sii_l2t0_req[24] ^ `TOP.cpu.sii_l2t0_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t0_req_vld,5))) && ($0in_delay(sii_l2t0_req[24] == 0,5)) && ($0in_delay(sii_l2t0_req[25] == 0,5)) && ($0in_delay(sii_l2t0_req[26] == 1,5)) && ($0in_rising_edge($0in_delay(l2t0_sii_iq_dequeue,5))) && !(sii_wri_ecc3_l0_cycle4 == sii_l2b0_ecc[3]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc3_l0_wri_cycle4
*/

wire sii_wri_ecc4_l0_cycle4 =  ( `TOP.cpu.sii_l2t0_req[11] ^ `TOP.cpu.sii_l2t0_req[12] ^ `TOP.cpu.sii_l2t0_req[13] ^ `TOP.cpu.sii_l2t0_req[14] ^ `TOP.cpu.sii_l2t0_req[15] ^ `TOP.cpu.sii_l2t0_req[16] ^ `TOP.cpu.sii_l2t0_req[17] ^ `TOP.cpu.sii_l2t0_req[18] ^ `TOP.cpu.sii_l2t0_req[19] ^ `TOP.cpu.sii_l2t0_req[20] ^ `TOP.cpu.sii_l2t0_req[21] ^ `TOP.cpu.sii_l2t0_req[22] ^ `TOP.cpu.sii_l2t0_req[23] ^ `TOP.cpu.sii_l2t0_req[24] ^ `TOP.cpu.sii_l2t0_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t0_req_vld,5))) && ($0in_delay(sii_l2t0_req[24] == 0,5)) && ($0in_delay(sii_l2t0_req[25] == 0,5)) && ($0in_delay(sii_l2t0_req[26] == 1,5)) && ($0in_rising_edge($0in_delay(l2t0_sii_iq_dequeue,5))) && !(sii_wri_ecc4_l0_cycle4 == sii_l2b0_ecc[4]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc4_l0_wri_cycle4
*/

wire sii_wri_ecc5_l0_cycle4 =  (`TOP.cpu.sii_l2t0_req[26] ^ `TOP.cpu.sii_l2t0_req[27] ^ `TOP.cpu.sii_l2t0_req[28] ^ `TOP.cpu.sii_l2t0_req[29] ^ `TOP.cpu.sii_l2t0_req[30] ^ `TOP.cpu.sii_l2t0_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t0_req_vld,5))) && ($0in_delay(sii_l2t0_req[24] == 0,5)) && ($0in_delay(sii_l2t0_req[25] == 0,5)) && ($0in_delay(sii_l2t0_req[26] == 1,5)) && ($0in_rising_edge($0in_delay(l2t0_sii_iq_dequeue,5))) && !(sii_wri_ecc5_l0_cycle4 == sii_l2b0_ecc[5]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc5_l0_wri_cycle4
*/

wire sii_wri_ecc6_l0_cycle4 =  (`TOP.cpu.sii_l2t0_req[0] ^ `TOP.cpu.sii_l2t0_req[1] ^ `TOP.cpu.sii_l2t0_req[2] ^ `TOP.cpu.sii_l2t0_req[4] ^ `TOP.cpu.sii_l2t0_req[5] ^ `TOP.cpu.sii_l2t0_req[7] ^ `TOP.cpu.sii_l2t0_req[10] ^ `TOP.cpu.sii_l2t0_req[11] ^ `TOP.cpu.sii_l2t0_req[12] ^ `TOP.cpu.sii_l2t0_req[14] ^ `TOP.cpu.sii_l2t0_req[17] ^ `TOP.cpu.sii_l2t0_req[18] ^ `TOP.cpu.sii_l2t0_req[21] ^ `TOP.cpu.sii_l2t0_req[23] ^ `TOP.cpu.sii_l2t0_req[24] ^ `TOP.cpu.sii_l2t0_req[26] ^ `TOP.cpu.sii_l2t0_req[27] ^ `TOP.cpu.sii_l2t0_req[29] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t0_req_vld,5))) && ($0in_delay(sii_l2t0_req[24] == 0,5)) && ($0in_delay(sii_l2t0_req[25] == 0,5)) && ($0in_delay(sii_l2t0_req[26] == 1,5)) && ($0in_rising_edge($0in_delay(l2t0_sii_iq_dequeue,5))) && !(sii_wri_ecc6_l0_cycle4 == sii_l2b0_ecc[6]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc6_l0_wri_cycle4
*/

wire sii_wri_ecc0_l0_cycle5 =  (`TOP.cpu.sii_l2t0_req[0] ^ `TOP.cpu.sii_l2t0_req[1] ^ `TOP.cpu.sii_l2t0_req[3] ^ `TOP.cpu.sii_l2t0_req[4] ^ `TOP.cpu.sii_l2t0_req[6] ^ `TOP.cpu.sii_l2t0_req[8] ^ `TOP.cpu.sii_l2t0_req[10] ^ `TOP.cpu.sii_l2t0_req[11] ^ `TOP.cpu.sii_l2t0_req[13] ^ `TOP.cpu.sii_l2t0_req[15] ^ `TOP.cpu.sii_l2t0_req[17] ^ `TOP.cpu.sii_l2t0_req[19] ^ `TOP.cpu.sii_l2t0_req[21] ^ `TOP.cpu.sii_l2t0_req[23] ^ `TOP.cpu.sii_l2t0_req[25] ^ `TOP.cpu.sii_l2t0_req[26] ^ `TOP.cpu.sii_l2t0_req[28] ^ `TOP.cpu.sii_l2t0_req[30] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t0_req_vld,6))) && ($0in_delay(sii_l2t0_req[24] == 0,6)) && ($0in_delay(sii_l2t0_req[25] == 0,6)) && ($0in_delay(sii_l2t0_req[26] == 1,6)) && ($0in_rising_edge($0in_delay(l2t0_sii_iq_dequeue,6))) && !(sii_wri_ecc0_l0_cycle5 == sii_l2b0_ecc[0]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc0_l0_wri_cycle5
*/

wire sii_wri_ecc1_l0_cycle5 =  (`TOP.cpu.sii_l2t0_req[0] ^ `TOP.cpu.sii_l2t0_req[2] ^ `TOP.cpu.sii_l2t0_req[3] ^ `TOP.cpu.sii_l2t0_req[5] ^ `TOP.cpu.sii_l2t0_req[6] ^ `TOP.cpu.sii_l2t0_req[9] ^ `TOP.cpu.sii_l2t0_req[10] ^ `TOP.cpu.sii_l2t0_req[12] ^ `TOP.cpu.sii_l2t0_req[13] ^ `TOP.cpu.sii_l2t0_req[16] ^ `TOP.cpu.sii_l2t0_req[17] ^ `TOP.cpu.sii_l2t0_req[20] ^ `TOP.cpu.sii_l2t0_req[21] ^ `TOP.cpu.sii_l2t0_req[24] ^ `TOP.cpu.sii_l2t0_req[25] ^ `TOP.cpu.sii_l2t0_req[27] ^ `TOP.cpu.sii_l2t0_req[28] ^ `TOP.cpu.sii_l2t0_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t0_req_vld,6))) && ($0in_delay(sii_l2t0_req[24] == 0,6)) && ($0in_delay(sii_l2t0_req[25] == 0,6)) && ($0in_delay(sii_l2t0_req[26] == 1,6)) && ($0in_rising_edge($0in_delay(l2t0_sii_iq_dequeue,6))) && !(sii_wri_ecc1_l0_cycle5 == sii_l2b0_ecc[1]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc1_l0_wri_cycle5
*/

wire sii_wri_ecc2_l0_cycle5 =  (`TOP.cpu.sii_l2t0_req[1] ^ `TOP.cpu.sii_l2t0_req[2] ^ `TOP.cpu.sii_l2t0_req[3] ^ `TOP.cpu.sii_l2t0_req[7] ^ `TOP.cpu.sii_l2t0_req[8] ^ `TOP.cpu.sii_l2t0_req[9] ^ `TOP.cpu.sii_l2t0_req[10] ^ `TOP.cpu.sii_l2t0_req[14] ^ `TOP.cpu.sii_l2t0_req[15] ^ `TOP.cpu.sii_l2t0_req[16] ^ `TOP.cpu.sii_l2t0_req[17] ^ `TOP.cpu.sii_l2t0_req[22] ^ `TOP.cpu.sii_l2t0_req[23] ^ `TOP.cpu.sii_l2t0_req[24] ^ `TOP.cpu.sii_l2t0_req[25] ^ `TOP.cpu.sii_l2t0_req[29] ^ `TOP.cpu.sii_l2t0_req[30] ^ `TOP.cpu.sii_l2t0_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t0_req_vld,6))) && ($0in_delay(sii_l2t0_req[24] == 0,6)) && ($0in_delay(sii_l2t0_req[25] == 0,6)) && ($0in_delay(sii_l2t0_req[26] == 1,6)) && ($0in_rising_edge($0in_delay(l2t0_sii_iq_dequeue,6))) && !(sii_wri_ecc2_l0_cycle5 == sii_l2b0_ecc[2]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc2_l0_wri_cycle5
*/

wire sii_wri_ecc3_l0_cycle5 =  (`TOP.cpu.sii_l2t0_req[4] ^ `TOP.cpu.sii_l2t0_req[5] ^ `TOP.cpu.sii_l2t0_req[6] ^ `TOP.cpu.sii_l2t0_req[7] ^ `TOP.cpu.sii_l2t0_req[8] ^ `TOP.cpu.sii_l2t0_req[9] ^ `TOP.cpu.sii_l2t0_req[10] ^ `TOP.cpu.sii_l2t0_req[18] ^ `TOP.cpu.sii_l2t0_req[19] ^ `TOP.cpu.sii_l2t0_req[20] ^ `TOP.cpu.sii_l2t0_req[21] ^ `TOP.cpu.sii_l2t0_req[22] ^ `TOP.cpu.sii_l2t0_req[23] ^ `TOP.cpu.sii_l2t0_req[24] ^ `TOP.cpu.sii_l2t0_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t0_req_vld,6))) && ($0in_delay(sii_l2t0_req[24] == 0,6)) && ($0in_delay(sii_l2t0_req[25] == 0,6)) && ($0in_delay(sii_l2t0_req[26] == 1,6)) && ($0in_rising_edge($0in_delay(l2t0_sii_iq_dequeue,6))) && !(sii_wri_ecc3_l0_cycle5 == sii_l2b0_ecc[3]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc3_l0_wri_cycle5
*/

wire sii_wri_ecc4_l0_cycle5 =  ( `TOP.cpu.sii_l2t0_req[11] ^ `TOP.cpu.sii_l2t0_req[12] ^ `TOP.cpu.sii_l2t0_req[13] ^ `TOP.cpu.sii_l2t0_req[14] ^ `TOP.cpu.sii_l2t0_req[15] ^ `TOP.cpu.sii_l2t0_req[16] ^ `TOP.cpu.sii_l2t0_req[17] ^ `TOP.cpu.sii_l2t0_req[18] ^ `TOP.cpu.sii_l2t0_req[19] ^ `TOP.cpu.sii_l2t0_req[20] ^ `TOP.cpu.sii_l2t0_req[21] ^ `TOP.cpu.sii_l2t0_req[22] ^ `TOP.cpu.sii_l2t0_req[23] ^ `TOP.cpu.sii_l2t0_req[24] ^ `TOP.cpu.sii_l2t0_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t0_req_vld,6))) && ($0in_delay(sii_l2t0_req[24] == 0,6)) && ($0in_delay(sii_l2t0_req[25] == 0,6)) && ($0in_delay(sii_l2t0_req[26] == 1,6)) && ($0in_rising_edge($0in_delay(l2t0_sii_iq_dequeue,6))) && !(sii_wri_ecc4_l0_cycle5 == sii_l2b0_ecc[4]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc4_l0_wri_cycle5
*/

wire sii_wri_ecc5_l0_cycle5 =  (`TOP.cpu.sii_l2t0_req[26] ^ `TOP.cpu.sii_l2t0_req[27] ^ `TOP.cpu.sii_l2t0_req[28] ^ `TOP.cpu.sii_l2t0_req[29] ^ `TOP.cpu.sii_l2t0_req[30] ^ `TOP.cpu.sii_l2t0_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t0_req_vld,6))) && ($0in_delay(sii_l2t0_req[24] == 0,6)) && ($0in_delay(sii_l2t0_req[25] == 0,2)) && ($0in_delay(sii_l2t0_req[26] == 1,6)) && ($0in_rising_edge($0in_delay(l2t0_sii_iq_dequeue,6))) && !(sii_wri_ecc5_l0_cycle5 == sii_l2b0_ecc[5]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc5_l0_wri_cycle5
*/

wire sii_wri_ecc6_l0_cycle5 =  (`TOP.cpu.sii_l2t0_req[0] ^ `TOP.cpu.sii_l2t0_req[1] ^ `TOP.cpu.sii_l2t0_req[2] ^ `TOP.cpu.sii_l2t0_req[4] ^ `TOP.cpu.sii_l2t0_req[5] ^ `TOP.cpu.sii_l2t0_req[7] ^ `TOP.cpu.sii_l2t0_req[10] ^ `TOP.cpu.sii_l2t0_req[11] ^ `TOP.cpu.sii_l2t0_req[12] ^ `TOP.cpu.sii_l2t0_req[14] ^ `TOP.cpu.sii_l2t0_req[17] ^ `TOP.cpu.sii_l2t0_req[18] ^ `TOP.cpu.sii_l2t0_req[21] ^ `TOP.cpu.sii_l2t0_req[23] ^ `TOP.cpu.sii_l2t0_req[24] ^ `TOP.cpu.sii_l2t0_req[26] ^ `TOP.cpu.sii_l2t0_req[27] ^ `TOP.cpu.sii_l2t0_req[29] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t0_req_vld,6))) && ($0in_delay(sii_l2t0_req[24] == 0,6)) && ($0in_delay(sii_l2t0_req[25] == 0,6)) && ($0in_delay(sii_l2t0_req[26] == 1,6)) && ($0in_rising_edge($0in_delay(l2t0_sii_iq_dequeue,6))) && !(sii_wri_ecc6_l0_cycle5 == sii_l2b0_ecc[6]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc6_l0_wri_cycle5
*/

wire sii_wri_ecc0_l0_cycle6 =  (`TOP.cpu.sii_l2t0_req[0] ^ `TOP.cpu.sii_l2t0_req[1] ^ `TOP.cpu.sii_l2t0_req[3] ^ `TOP.cpu.sii_l2t0_req[4] ^ `TOP.cpu.sii_l2t0_req[6] ^ `TOP.cpu.sii_l2t0_req[8] ^ `TOP.cpu.sii_l2t0_req[10] ^ `TOP.cpu.sii_l2t0_req[11] ^ `TOP.cpu.sii_l2t0_req[13] ^ `TOP.cpu.sii_l2t0_req[15] ^ `TOP.cpu.sii_l2t0_req[17] ^ `TOP.cpu.sii_l2t0_req[19] ^ `TOP.cpu.sii_l2t0_req[21] ^ `TOP.cpu.sii_l2t0_req[23] ^ `TOP.cpu.sii_l2t0_req[25] ^ `TOP.cpu.sii_l2t0_req[26] ^ `TOP.cpu.sii_l2t0_req[28] ^ `TOP.cpu.sii_l2t0_req[30] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t0_req_vld,7))) && ($0in_delay(sii_l2t0_req[24] == 0,7)) && ($0in_delay(sii_l2t0_req[25] == 0,7)) && ($0in_delay(sii_l2t0_req[26] == 1,7)) && ($0in_rising_edge($0in_delay(l2t0_sii_iq_dequeue,7))) && !(sii_wri_ecc0_l0_cycle6 == sii_l2b0_ecc[0]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc0_l0_wri_cycle6
*/

wire sii_wri_ecc1_l0_cycle6 =  (`TOP.cpu.sii_l2t0_req[0] ^ `TOP.cpu.sii_l2t0_req[2] ^ `TOP.cpu.sii_l2t0_req[3] ^ `TOP.cpu.sii_l2t0_req[5] ^ `TOP.cpu.sii_l2t0_req[6] ^ `TOP.cpu.sii_l2t0_req[9] ^ `TOP.cpu.sii_l2t0_req[10] ^ `TOP.cpu.sii_l2t0_req[12] ^ `TOP.cpu.sii_l2t0_req[13] ^ `TOP.cpu.sii_l2t0_req[16] ^ `TOP.cpu.sii_l2t0_req[17] ^ `TOP.cpu.sii_l2t0_req[20] ^ `TOP.cpu.sii_l2t0_req[21] ^ `TOP.cpu.sii_l2t0_req[24] ^ `TOP.cpu.sii_l2t0_req[25] ^ `TOP.cpu.sii_l2t0_req[27] ^ `TOP.cpu.sii_l2t0_req[28] ^ `TOP.cpu.sii_l2t0_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t0_req_vld,7))) && ($0in_delay(sii_l2t0_req[24] == 0,7)) && ($0in_delay(sii_l2t0_req[25] == 0,7)) && ($0in_delay(sii_l2t0_req[26] == 1,7)) && ($0in_rising_edge($0in_delay(l2t0_sii_iq_dequeue,7))) && !(sii_wri_ecc1_l0_cycle6 == sii_l2b0_ecc[1]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc1_l0_wri_cycle6
*/

wire sii_wri_ecc2_l0_cycle6 =  (`TOP.cpu.sii_l2t0_req[1] ^ `TOP.cpu.sii_l2t0_req[2] ^ `TOP.cpu.sii_l2t0_req[3] ^ `TOP.cpu.sii_l2t0_req[7] ^ `TOP.cpu.sii_l2t0_req[8] ^ `TOP.cpu.sii_l2t0_req[9] ^ `TOP.cpu.sii_l2t0_req[10] ^ `TOP.cpu.sii_l2t0_req[14] ^ `TOP.cpu.sii_l2t0_req[15] ^ `TOP.cpu.sii_l2t0_req[16] ^ `TOP.cpu.sii_l2t0_req[17] ^ `TOP.cpu.sii_l2t0_req[22] ^ `TOP.cpu.sii_l2t0_req[23] ^ `TOP.cpu.sii_l2t0_req[24] ^ `TOP.cpu.sii_l2t0_req[25] ^ `TOP.cpu.sii_l2t0_req[29] ^ `TOP.cpu.sii_l2t0_req[30] ^ `TOP.cpu.sii_l2t0_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t0_req_vld,7))) && ($0in_delay(sii_l2t0_req[24] == 0,7)) && ($0in_delay(sii_l2t0_req[25] == 0,7)) && ($0in_delay(sii_l2t0_req[26] == 1,7)) && ($0in_rising_edge($0in_delay(l2t0_sii_iq_dequeue,7))) && !(sii_wri_ecc2_l0_cycle6 == sii_l2b0_ecc[2]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc2_l0_wri_cycle6
*/

wire sii_wri_ecc3_l0_cycle6 =  (`TOP.cpu.sii_l2t0_req[4] ^ `TOP.cpu.sii_l2t0_req[5] ^ `TOP.cpu.sii_l2t0_req[6] ^ `TOP.cpu.sii_l2t0_req[7] ^ `TOP.cpu.sii_l2t0_req[8] ^ `TOP.cpu.sii_l2t0_req[9] ^ `TOP.cpu.sii_l2t0_req[10] ^ `TOP.cpu.sii_l2t0_req[18] ^ `TOP.cpu.sii_l2t0_req[19] ^ `TOP.cpu.sii_l2t0_req[20] ^ `TOP.cpu.sii_l2t0_req[21] ^ `TOP.cpu.sii_l2t0_req[22] ^ `TOP.cpu.sii_l2t0_req[23] ^ `TOP.cpu.sii_l2t0_req[24] ^ `TOP.cpu.sii_l2t0_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t0_req_vld,7))) && ($0in_delay(sii_l2t0_req[24] == 0,7)) && ($0in_delay(sii_l2t0_req[25] == 0,7)) && ($0in_delay(sii_l2t0_req[26] == 1,7)) && ($0in_rising_edge($0in_delay(l2t0_sii_iq_dequeue,7))) && !(sii_wri_ecc3_l0_cycle6 == sii_l2b0_ecc[3]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc3_l0_wri_cycle6
*/

wire sii_wri_ecc4_l0_cycle6 =  ( `TOP.cpu.sii_l2t0_req[11] ^ `TOP.cpu.sii_l2t0_req[12] ^ `TOP.cpu.sii_l2t0_req[13] ^ `TOP.cpu.sii_l2t0_req[14] ^ `TOP.cpu.sii_l2t0_req[15] ^ `TOP.cpu.sii_l2t0_req[16] ^ `TOP.cpu.sii_l2t0_req[17] ^ `TOP.cpu.sii_l2t0_req[18] ^ `TOP.cpu.sii_l2t0_req[19] ^ `TOP.cpu.sii_l2t0_req[20] ^ `TOP.cpu.sii_l2t0_req[21] ^ `TOP.cpu.sii_l2t0_req[22] ^ `TOP.cpu.sii_l2t0_req[23] ^ `TOP.cpu.sii_l2t0_req[24] ^ `TOP.cpu.sii_l2t0_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t0_req_vld,7))) && ($0in_delay(sii_l2t0_req[24] == 0,7)) && ($0in_delay(sii_l2t0_req[25] == 0,7)) && ($0in_delay(sii_l2t0_req[26] == 1,7)) && ($0in_rising_edge($0in_delay(l2t0_sii_iq_dequeue,7))) && !(sii_wri_ecc4_l0_cycle6 == sii_l2b0_ecc[4]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc4_l0_wri_cycle6
*/

wire sii_wri_ecc5_l0_cycle6 =  (`TOP.cpu.sii_l2t0_req[26] ^ `TOP.cpu.sii_l2t0_req[27] ^ `TOP.cpu.sii_l2t0_req[28] ^ `TOP.cpu.sii_l2t0_req[29] ^ `TOP.cpu.sii_l2t0_req[30] ^ `TOP.cpu.sii_l2t0_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t0_req_vld,7))) && ($0in_delay(sii_l2t0_req[24] == 0,7)) && ($0in_delay(sii_l2t0_req[25] == 0,7)) && ($0in_delay(sii_l2t0_req[26] == 1,7)) && ($0in_rising_edge($0in_delay(l2t0_sii_iq_dequeue,7))) && !(sii_wri_ecc5_l0_cycle6 == sii_l2b0_ecc[5]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc5_l0_wri_cycle6
*/

wire sii_wri_ecc6_l0_cycle6 =  (`TOP.cpu.sii_l2t0_req[0] ^ `TOP.cpu.sii_l2t0_req[1] ^ `TOP.cpu.sii_l2t0_req[2] ^ `TOP.cpu.sii_l2t0_req[4] ^ `TOP.cpu.sii_l2t0_req[5] ^ `TOP.cpu.sii_l2t0_req[7] ^ `TOP.cpu.sii_l2t0_req[10] ^ `TOP.cpu.sii_l2t0_req[11] ^ `TOP.cpu.sii_l2t0_req[12] ^ `TOP.cpu.sii_l2t0_req[14] ^ `TOP.cpu.sii_l2t0_req[17] ^ `TOP.cpu.sii_l2t0_req[18] ^ `TOP.cpu.sii_l2t0_req[21] ^ `TOP.cpu.sii_l2t0_req[23] ^ `TOP.cpu.sii_l2t0_req[24] ^ `TOP.cpu.sii_l2t0_req[26] ^ `TOP.cpu.sii_l2t0_req[27] ^ `TOP.cpu.sii_l2t0_req[29] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t0_req_vld,7))) && ($0in_delay(sii_l2t0_req[24] == 0,7)) && ($0in_delay(sii_l2t0_req[25] == 0,7)) && ($0in_delay(sii_l2t0_req[26] == 1,7)) && ($0in_rising_edge($0in_delay(l2t0_sii_iq_dequeue,7))) && !(sii_wri_ecc6_l0_cycle6 == sii_l2b0_ecc[6]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc6_l0_wri_cycle6
*/

wire sii_wri_ecc0_l0_cycle7 =  (`TOP.cpu.sii_l2t0_req[0] ^ `TOP.cpu.sii_l2t0_req[1] ^ `TOP.cpu.sii_l2t0_req[3] ^ `TOP.cpu.sii_l2t0_req[4] ^ `TOP.cpu.sii_l2t0_req[6] ^ `TOP.cpu.sii_l2t0_req[8] ^ `TOP.cpu.sii_l2t0_req[10] ^ `TOP.cpu.sii_l2t0_req[11] ^ `TOP.cpu.sii_l2t0_req[13] ^ `TOP.cpu.sii_l2t0_req[15] ^ `TOP.cpu.sii_l2t0_req[17] ^ `TOP.cpu.sii_l2t0_req[19] ^ `TOP.cpu.sii_l2t0_req[21] ^ `TOP.cpu.sii_l2t0_req[23] ^ `TOP.cpu.sii_l2t0_req[25] ^ `TOP.cpu.sii_l2t0_req[26] ^ `TOP.cpu.sii_l2t0_req[28] ^ `TOP.cpu.sii_l2t0_req[30] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t0_req_vld,8))) && ($0in_delay(sii_l2t0_req[24] == 0,8)) && ($0in_delay(sii_l2t0_req[25] == 0,8)) && ($0in_delay(sii_l2t0_req[26] == 1,8)) && ($0in_rising_edge($0in_delay(l2t0_sii_iq_dequeue,8))) && !(sii_wri_ecc0_l0_cycle7 == sii_l2b0_ecc[0]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc0_l0_wri_cycle7
*/

wire sii_wri_ecc1_l0_cycle7 =  (`TOP.cpu.sii_l2t0_req[0] ^ `TOP.cpu.sii_l2t0_req[2] ^ `TOP.cpu.sii_l2t0_req[3] ^ `TOP.cpu.sii_l2t0_req[5] ^ `TOP.cpu.sii_l2t0_req[6] ^ `TOP.cpu.sii_l2t0_req[9] ^ `TOP.cpu.sii_l2t0_req[10] ^ `TOP.cpu.sii_l2t0_req[12] ^ `TOP.cpu.sii_l2t0_req[13] ^ `TOP.cpu.sii_l2t0_req[16] ^ `TOP.cpu.sii_l2t0_req[17] ^ `TOP.cpu.sii_l2t0_req[20] ^ `TOP.cpu.sii_l2t0_req[21] ^ `TOP.cpu.sii_l2t0_req[24] ^ `TOP.cpu.sii_l2t0_req[25] ^ `TOP.cpu.sii_l2t0_req[27] ^ `TOP.cpu.sii_l2t0_req[28] ^ `TOP.cpu.sii_l2t0_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t0_req_vld,8))) && ($0in_delay(sii_l2t0_req[24] == 0,8)) && ($0in_delay(sii_l2t0_req[25] == 0,8)) && ($0in_delay(sii_l2t0_req[26] == 1,8)) && ($0in_rising_edge($0in_delay(l2t0_sii_iq_dequeue,8))) && !(sii_wri_ecc1_l0_cycle7 == sii_l2b0_ecc[1]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc1_l0_wri_cycle7
*/

wire sii_wri_ecc2_l0_cycle7 =  (`TOP.cpu.sii_l2t0_req[1] ^ `TOP.cpu.sii_l2t0_req[2] ^ `TOP.cpu.sii_l2t0_req[3] ^ `TOP.cpu.sii_l2t0_req[7] ^ `TOP.cpu.sii_l2t0_req[8] ^ `TOP.cpu.sii_l2t0_req[9] ^ `TOP.cpu.sii_l2t0_req[10] ^ `TOP.cpu.sii_l2t0_req[14] ^ `TOP.cpu.sii_l2t0_req[15] ^ `TOP.cpu.sii_l2t0_req[16] ^ `TOP.cpu.sii_l2t0_req[17] ^ `TOP.cpu.sii_l2t0_req[22] ^ `TOP.cpu.sii_l2t0_req[23] ^ `TOP.cpu.sii_l2t0_req[24] ^ `TOP.cpu.sii_l2t0_req[25] ^ `TOP.cpu.sii_l2t0_req[29] ^ `TOP.cpu.sii_l2t0_req[30] ^ `TOP.cpu.sii_l2t0_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t0_req_vld,8))) && ($0in_delay(sii_l2t0_req[24] == 0,8)) && ($0in_delay(sii_l2t0_req[25] == 0,8)) && ($0in_delay(sii_l2t0_req[26] == 1,8)) && ($0in_rising_edge($0in_delay(l2t0_sii_iq_dequeue,8))) && !(sii_wri_ecc2_l0_cycle7 == sii_l2b0_ecc[2]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc2_l0_wri_cycle7
*/

wire sii_wri_ecc3_l0_cycle7 =  (`TOP.cpu.sii_l2t0_req[4] ^ `TOP.cpu.sii_l2t0_req[5] ^ `TOP.cpu.sii_l2t0_req[6] ^ `TOP.cpu.sii_l2t0_req[7] ^ `TOP.cpu.sii_l2t0_req[8] ^ `TOP.cpu.sii_l2t0_req[9] ^ `TOP.cpu.sii_l2t0_req[10] ^ `TOP.cpu.sii_l2t0_req[18] ^ `TOP.cpu.sii_l2t0_req[19] ^ `TOP.cpu.sii_l2t0_req[20] ^ `TOP.cpu.sii_l2t0_req[21] ^ `TOP.cpu.sii_l2t0_req[22] ^ `TOP.cpu.sii_l2t0_req[23] ^ `TOP.cpu.sii_l2t0_req[24] ^ `TOP.cpu.sii_l2t0_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t0_req_vld,8))) && ($0in_delay(sii_l2t0_req[24] == 0,8)) && ($0in_delay(sii_l2t0_req[25] == 0,8)) && ($0in_delay(sii_l2t0_req[26] == 1,8)) && ($0in_rising_edge($0in_delay(l2t0_sii_iq_dequeue,8))) && !(sii_wri_ecc3_l0_cycle7 == sii_l2b0_ecc[3]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc3_l0_wri_cycle7
*/

wire sii_wri_ecc4_l0_cycle7 =  ( `TOP.cpu.sii_l2t0_req[11] ^ `TOP.cpu.sii_l2t0_req[12] ^ `TOP.cpu.sii_l2t0_req[13] ^ `TOP.cpu.sii_l2t0_req[14] ^ `TOP.cpu.sii_l2t0_req[15] ^ `TOP.cpu.sii_l2t0_req[16] ^ `TOP.cpu.sii_l2t0_req[17] ^ `TOP.cpu.sii_l2t0_req[18] ^ `TOP.cpu.sii_l2t0_req[19] ^ `TOP.cpu.sii_l2t0_req[20] ^ `TOP.cpu.sii_l2t0_req[21] ^ `TOP.cpu.sii_l2t0_req[22] ^ `TOP.cpu.sii_l2t0_req[23] ^ `TOP.cpu.sii_l2t0_req[24] ^ `TOP.cpu.sii_l2t0_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t0_req_vld,8))) && ($0in_delay(sii_l2t0_req[24] == 0,8)) && ($0in_delay(sii_l2t0_req[25] == 0,8)) && ($0in_delay(sii_l2t0_req[26] == 1,8)) && ($0in_rising_edge($0in_delay(l2t0_sii_iq_dequeue,8))) && !(sii_wri_ecc4_l0_cycle7 == sii_l2b0_ecc[4]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc4_l0_wri_cycle7
*/

wire sii_wri_ecc5_l0_cycle7 =  (`TOP.cpu.sii_l2t0_req[26] ^ `TOP.cpu.sii_l2t0_req[27] ^ `TOP.cpu.sii_l2t0_req[28] ^ `TOP.cpu.sii_l2t0_req[29] ^ `TOP.cpu.sii_l2t0_req[30] ^ `TOP.cpu.sii_l2t0_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t0_req_vld,8))) && ($0in_delay(sii_l2t0_req[24] == 0,8)) && ($0in_delay(sii_l2t0_req[25] == 0,8)) && ($0in_delay(sii_l2t0_req[26] == 1,8)) && ($0in_rising_edge($0in_delay(l2t0_sii_iq_dequeue,8))) && !(sii_wri_ecc5_l0_cycle7 == sii_l2b0_ecc[5]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc5_l0_wri_cycle7
*/

wire sii_wri_ecc6_l0_cycle7 =  (`TOP.cpu.sii_l2t0_req[0] ^ `TOP.cpu.sii_l2t0_req[1] ^ `TOP.cpu.sii_l2t0_req[2] ^ `TOP.cpu.sii_l2t0_req[4] ^ `TOP.cpu.sii_l2t0_req[5] ^ `TOP.cpu.sii_l2t0_req[7] ^ `TOP.cpu.sii_l2t0_req[10] ^ `TOP.cpu.sii_l2t0_req[11] ^ `TOP.cpu.sii_l2t0_req[12] ^ `TOP.cpu.sii_l2t0_req[14] ^ `TOP.cpu.sii_l2t0_req[17] ^ `TOP.cpu.sii_l2t0_req[18] ^ `TOP.cpu.sii_l2t0_req[21] ^ `TOP.cpu.sii_l2t0_req[23] ^ `TOP.cpu.sii_l2t0_req[24] ^ `TOP.cpu.sii_l2t0_req[26] ^ `TOP.cpu.sii_l2t0_req[27] ^ `TOP.cpu.sii_l2t0_req[29] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t0_req_vld,8))) && ($0in_delay(sii_l2t0_req[24] == 0,8)) && ($0in_delay(sii_l2t0_req[25] == 0,8)) && ($0in_delay(sii_l2t0_req[26] == 1,8)) && ($0in_rising_edge($0in_delay(l2t0_sii_iq_dequeue,8))) && !(sii_wri_ecc6_l0_cycle7 == sii_l2b0_ecc[6]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc6_l0_wri_cycle7
*/

wire sii_wri_ecc0_l0_cycle8 =  (`TOP.cpu.sii_l2t0_req[0] ^ `TOP.cpu.sii_l2t0_req[1] ^ `TOP.cpu.sii_l2t0_req[3] ^ `TOP.cpu.sii_l2t0_req[4] ^ `TOP.cpu.sii_l2t0_req[6] ^ `TOP.cpu.sii_l2t0_req[8] ^ `TOP.cpu.sii_l2t0_req[10] ^ `TOP.cpu.sii_l2t0_req[11] ^ `TOP.cpu.sii_l2t0_req[13] ^ `TOP.cpu.sii_l2t0_req[15] ^ `TOP.cpu.sii_l2t0_req[17] ^ `TOP.cpu.sii_l2t0_req[19] ^ `TOP.cpu.sii_l2t0_req[21] ^ `TOP.cpu.sii_l2t0_req[23] ^ `TOP.cpu.sii_l2t0_req[25] ^ `TOP.cpu.sii_l2t0_req[26] ^ `TOP.cpu.sii_l2t0_req[28] ^ `TOP.cpu.sii_l2t0_req[30] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t0_req_vld,9))) && ($0in_delay(sii_l2t0_req[24] == 0,9)) && ($0in_delay(sii_l2t0_req[25] == 0,9)) && ($0in_delay(sii_l2t0_req[26] == 1,9)) && ($0in_rising_edge($0in_delay(l2t0_sii_iq_dequeue,9))) && !(sii_wri_ecc0_l0_cycle8 == sii_l2b0_ecc[0]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc0_l0_wri_cycle8
*/

wire sii_wri_ecc1_l0_cycle8 =  (`TOP.cpu.sii_l2t0_req[0] ^ `TOP.cpu.sii_l2t0_req[2] ^ `TOP.cpu.sii_l2t0_req[3] ^ `TOP.cpu.sii_l2t0_req[5] ^ `TOP.cpu.sii_l2t0_req[6] ^ `TOP.cpu.sii_l2t0_req[9] ^ `TOP.cpu.sii_l2t0_req[10] ^ `TOP.cpu.sii_l2t0_req[12] ^ `TOP.cpu.sii_l2t0_req[13] ^ `TOP.cpu.sii_l2t0_req[16] ^ `TOP.cpu.sii_l2t0_req[17] ^ `TOP.cpu.sii_l2t0_req[20] ^ `TOP.cpu.sii_l2t0_req[21] ^ `TOP.cpu.sii_l2t0_req[24] ^ `TOP.cpu.sii_l2t0_req[25] ^ `TOP.cpu.sii_l2t0_req[27] ^ `TOP.cpu.sii_l2t0_req[28] ^ `TOP.cpu.sii_l2t0_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t0_req_vld,9))) && ($0in_delay(sii_l2t0_req[24] == 0,9)) && ($0in_delay(sii_l2t0_req[25] == 0,9)) && ($0in_delay(sii_l2t0_req[26] == 1,9)) && ($0in_rising_edge($0in_delay(l2t0_sii_iq_dequeue,9))) && !(sii_wri_ecc1_l0_cycle8 == sii_l2b0_ecc[1]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc1_l0_wri_cycle8
*/

wire sii_wri_ecc2_l0_cycle8 =  (`TOP.cpu.sii_l2t0_req[1] ^ `TOP.cpu.sii_l2t0_req[2] ^ `TOP.cpu.sii_l2t0_req[3] ^ `TOP.cpu.sii_l2t0_req[7] ^ `TOP.cpu.sii_l2t0_req[8] ^ `TOP.cpu.sii_l2t0_req[9] ^ `TOP.cpu.sii_l2t0_req[10] ^ `TOP.cpu.sii_l2t0_req[14] ^ `TOP.cpu.sii_l2t0_req[15] ^ `TOP.cpu.sii_l2t0_req[16] ^ `TOP.cpu.sii_l2t0_req[17] ^ `TOP.cpu.sii_l2t0_req[22] ^ `TOP.cpu.sii_l2t0_req[23] ^ `TOP.cpu.sii_l2t0_req[24] ^ `TOP.cpu.sii_l2t0_req[25] ^ `TOP.cpu.sii_l2t0_req[29] ^ `TOP.cpu.sii_l2t0_req[30] ^ `TOP.cpu.sii_l2t0_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t0_req_vld,9))) && ($0in_delay(sii_l2t0_req[24] == 0,9)) && ($0in_delay(sii_l2t0_req[25] == 0,9)) && ($0in_delay(sii_l2t0_req[26] == 1,9)) && ($0in_rising_edge($0in_delay(l2t0_sii_iq_dequeue,9))) && !(sii_wri_ecc2_l0_cycle8 == sii_l2b0_ecc[2]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc2_l0_wri_cycle8
*/

wire sii_wri_ecc3_l0_cycle8 =  (`TOP.cpu.sii_l2t0_req[4] ^ `TOP.cpu.sii_l2t0_req[5] ^ `TOP.cpu.sii_l2t0_req[6] ^ `TOP.cpu.sii_l2t0_req[7] ^ `TOP.cpu.sii_l2t0_req[8] ^ `TOP.cpu.sii_l2t0_req[9] ^ `TOP.cpu.sii_l2t0_req[10] ^ `TOP.cpu.sii_l2t0_req[18] ^ `TOP.cpu.sii_l2t0_req[19] ^ `TOP.cpu.sii_l2t0_req[20] ^ `TOP.cpu.sii_l2t0_req[21] ^ `TOP.cpu.sii_l2t0_req[22] ^ `TOP.cpu.sii_l2t0_req[23] ^ `TOP.cpu.sii_l2t0_req[24] ^ `TOP.cpu.sii_l2t0_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t0_req_vld,9))) && ($0in_delay(sii_l2t0_req[24] == 0,9)) && ($0in_delay(sii_l2t0_req[25] == 0,9)) && ($0in_delay(sii_l2t0_req[26] == 1,9)) && ($0in_rising_edge($0in_delay(l2t0_sii_iq_dequeue,9))) && !(sii_wri_ecc3_l0_cycle8 == sii_l2b0_ecc[3]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc3_l0_wri_cycle8
*/

wire sii_wri_ecc4_l0_cycle8 =  ( `TOP.cpu.sii_l2t0_req[11] ^ `TOP.cpu.sii_l2t0_req[12] ^ `TOP.cpu.sii_l2t0_req[13] ^ `TOP.cpu.sii_l2t0_req[14] ^ `TOP.cpu.sii_l2t0_req[15] ^ `TOP.cpu.sii_l2t0_req[16] ^ `TOP.cpu.sii_l2t0_req[17] ^ `TOP.cpu.sii_l2t0_req[18] ^ `TOP.cpu.sii_l2t0_req[19] ^ `TOP.cpu.sii_l2t0_req[20] ^ `TOP.cpu.sii_l2t0_req[21] ^ `TOP.cpu.sii_l2t0_req[22] ^ `TOP.cpu.sii_l2t0_req[23] ^ `TOP.cpu.sii_l2t0_req[24] ^ `TOP.cpu.sii_l2t0_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t0_req_vld,9))) && ($0in_delay(sii_l2t0_req[24] == 0,9)) && ($0in_delay(sii_l2t0_req[25] == 0,9)) && ($0in_delay(sii_l2t0_req[26] == 1,9)) && ($0in_rising_edge($0in_delay(l2t0_sii_iq_dequeue,9))) && !(sii_wri_ecc4_l0_cycle8 == sii_l2b0_ecc[4]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc4_l0_wri_cycle8
*/

wire sii_wri_ecc5_l0_cycle8 =  (`TOP.cpu.sii_l2t0_req[26] ^ `TOP.cpu.sii_l2t0_req[27] ^ `TOP.cpu.sii_l2t0_req[28] ^ `TOP.cpu.sii_l2t0_req[29] ^ `TOP.cpu.sii_l2t0_req[30] ^ `TOP.cpu.sii_l2t0_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t0_req_vld,9))) && ($0in_delay(sii_l2t0_req[24] == 0,9)) && ($0in_delay(sii_l2t0_req[25] == 0,9)) && ($0in_delay(sii_l2t0_req[26] == 1,9)) && ($0in_rising_edge($0in_delay(l2t0_sii_iq_dequeue,9))) && !(sii_wri_ecc5_l0_cycle8 == sii_l2b0_ecc[5]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc5_l0_wri_cycle8
*/

wire sii_wri_ecc6_l0_cycle8 =  (`TOP.cpu.sii_l2t0_req[0] ^ `TOP.cpu.sii_l2t0_req[1] ^ `TOP.cpu.sii_l2t0_req[2] ^ `TOP.cpu.sii_l2t0_req[4] ^ `TOP.cpu.sii_l2t0_req[5] ^ `TOP.cpu.sii_l2t0_req[7] ^ `TOP.cpu.sii_l2t0_req[10] ^ `TOP.cpu.sii_l2t0_req[11] ^ `TOP.cpu.sii_l2t0_req[12] ^ `TOP.cpu.sii_l2t0_req[14] ^ `TOP.cpu.sii_l2t0_req[17] ^ `TOP.cpu.sii_l2t0_req[18] ^ `TOP.cpu.sii_l2t0_req[21] ^ `TOP.cpu.sii_l2t0_req[23] ^ `TOP.cpu.sii_l2t0_req[24] ^ `TOP.cpu.sii_l2t0_req[26] ^ `TOP.cpu.sii_l2t0_req[27] ^ `TOP.cpu.sii_l2t0_req[29] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t0_req_vld,9))) && ($0in_delay(sii_l2t0_req[24] == 0,9)) && ($0in_delay(sii_l2t0_req[25] == 0,9)) && ($0in_delay(sii_l2t0_req[26] == 1,9)) && ($0in_rising_edge($0in_delay(l2t0_sii_iq_dequeue,9))) && !(sii_wri_ecc6_l0_cycle8 == sii_l2b0_ecc[6]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc6_l0_wri_cycle8
*/

wire sii_wri_ecc0_l0_cycle9 =  (`TOP.cpu.sii_l2t0_req[0] ^ `TOP.cpu.sii_l2t0_req[1] ^ `TOP.cpu.sii_l2t0_req[3] ^ `TOP.cpu.sii_l2t0_req[4] ^ `TOP.cpu.sii_l2t0_req[6] ^ `TOP.cpu.sii_l2t0_req[8] ^ `TOP.cpu.sii_l2t0_req[10] ^ `TOP.cpu.sii_l2t0_req[11] ^ `TOP.cpu.sii_l2t0_req[13] ^ `TOP.cpu.sii_l2t0_req[15] ^ `TOP.cpu.sii_l2t0_req[17] ^ `TOP.cpu.sii_l2t0_req[19] ^ `TOP.cpu.sii_l2t0_req[21] ^ `TOP.cpu.sii_l2t0_req[23] ^ `TOP.cpu.sii_l2t0_req[25] ^ `TOP.cpu.sii_l2t0_req[26] ^ `TOP.cpu.sii_l2t0_req[28] ^ `TOP.cpu.sii_l2t0_req[30] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t0_req_vld,10))) && ($0in_delay(sii_l2t0_req[24] == 0,10)) && ($0in_delay(sii_l2t0_req[25] == 0,10)) && ($0in_delay(sii_l2t0_req[26] == 1,10)) && ($0in_rising_edge($0in_delay(l2t0_sii_iq_dequeue,10))) && !(sii_wri_ecc0_l0_cycle9 == sii_l2b0_ecc[0]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc0_l0_wri_cycle9
*/

wire sii_wri_ecc1_l0_cycle9 =  (`TOP.cpu.sii_l2t0_req[0] ^ `TOP.cpu.sii_l2t0_req[2] ^ `TOP.cpu.sii_l2t0_req[3] ^ `TOP.cpu.sii_l2t0_req[5] ^ `TOP.cpu.sii_l2t0_req[6] ^ `TOP.cpu.sii_l2t0_req[9] ^ `TOP.cpu.sii_l2t0_req[10] ^ `TOP.cpu.sii_l2t0_req[12] ^ `TOP.cpu.sii_l2t0_req[13] ^ `TOP.cpu.sii_l2t0_req[16] ^ `TOP.cpu.sii_l2t0_req[17] ^ `TOP.cpu.sii_l2t0_req[20] ^ `TOP.cpu.sii_l2t0_req[21] ^ `TOP.cpu.sii_l2t0_req[24] ^ `TOP.cpu.sii_l2t0_req[25] ^ `TOP.cpu.sii_l2t0_req[27] ^ `TOP.cpu.sii_l2t0_req[28] ^ `TOP.cpu.sii_l2t0_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t0_req_vld,10))) && ($0in_delay(sii_l2t0_req[24] == 0,10)) && ($0in_delay(sii_l2t0_req[25] == 0,10)) && ($0in_delay(sii_l2t0_req[26] == 1,10)) && ($0in_rising_edge($0in_delay(l2t0_sii_iq_dequeue,10))) && !(sii_wri_ecc1_l0_cycle9 == sii_l2b0_ecc[1]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc1_l0_wri_cycle9
*/

wire sii_wri_ecc2_l0_cycle9 =  (`TOP.cpu.sii_l2t0_req[1] ^ `TOP.cpu.sii_l2t0_req[2] ^ `TOP.cpu.sii_l2t0_req[3] ^ `TOP.cpu.sii_l2t0_req[7] ^ `TOP.cpu.sii_l2t0_req[8] ^ `TOP.cpu.sii_l2t0_req[9] ^ `TOP.cpu.sii_l2t0_req[10] ^ `TOP.cpu.sii_l2t0_req[14] ^ `TOP.cpu.sii_l2t0_req[15] ^ `TOP.cpu.sii_l2t0_req[16] ^ `TOP.cpu.sii_l2t0_req[17] ^ `TOP.cpu.sii_l2t0_req[22] ^ `TOP.cpu.sii_l2t0_req[23] ^ `TOP.cpu.sii_l2t0_req[24] ^ `TOP.cpu.sii_l2t0_req[25] ^ `TOP.cpu.sii_l2t0_req[29] ^ `TOP.cpu.sii_l2t0_req[30] ^ `TOP.cpu.sii_l2t0_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t0_req_vld,10))) && ($0in_delay(sii_l2t0_req[24] == 0,10)) && ($0in_delay(sii_l2t0_req[25] == 0,10)) && ($0in_delay(sii_l2t0_req[26] == 1,10)) && ($0in_rising_edge($0in_delay(l2t0_sii_iq_dequeue,10))) && !(sii_wri_ecc2_l0_cycle9 == sii_l2b0_ecc[2]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc2_l0_wri_cycle9
*/

wire sii_wri_ecc3_l0_cycle9 =  (`TOP.cpu.sii_l2t0_req[4] ^ `TOP.cpu.sii_l2t0_req[5] ^ `TOP.cpu.sii_l2t0_req[6] ^ `TOP.cpu.sii_l2t0_req[7] ^ `TOP.cpu.sii_l2t0_req[8] ^ `TOP.cpu.sii_l2t0_req[9] ^ `TOP.cpu.sii_l2t0_req[10] ^ `TOP.cpu.sii_l2t0_req[18] ^ `TOP.cpu.sii_l2t0_req[19] ^ `TOP.cpu.sii_l2t0_req[20] ^ `TOP.cpu.sii_l2t0_req[21] ^ `TOP.cpu.sii_l2t0_req[22] ^ `TOP.cpu.sii_l2t0_req[23] ^ `TOP.cpu.sii_l2t0_req[24] ^ `TOP.cpu.sii_l2t0_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t0_req_vld,10))) && ($0in_delay(sii_l2t0_req[24] == 0,10)) && ($0in_delay(sii_l2t0_req[25] == 0,10)) && ($0in_delay(sii_l2t0_req[26] == 1,10)) && ($0in_rising_edge($0in_delay(l2t0_sii_iq_dequeue,10))) && !(sii_wri_ecc3_l0_cycle9 == sii_l2b0_ecc[3]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc3_l0_wri_cycle9
*/

wire sii_wri_ecc4_l0_cycle9 =  ( `TOP.cpu.sii_l2t0_req[11] ^ `TOP.cpu.sii_l2t0_req[12] ^ `TOP.cpu.sii_l2t0_req[13] ^ `TOP.cpu.sii_l2t0_req[14] ^ `TOP.cpu.sii_l2t0_req[15] ^ `TOP.cpu.sii_l2t0_req[16] ^ `TOP.cpu.sii_l2t0_req[17] ^ `TOP.cpu.sii_l2t0_req[18] ^ `TOP.cpu.sii_l2t0_req[19] ^ `TOP.cpu.sii_l2t0_req[20] ^ `TOP.cpu.sii_l2t0_req[21] ^ `TOP.cpu.sii_l2t0_req[22] ^ `TOP.cpu.sii_l2t0_req[23] ^ `TOP.cpu.sii_l2t0_req[24] ^ `TOP.cpu.sii_l2t0_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t0_req_vld,10))) && ($0in_delay(sii_l2t0_req[24] == 0,10)) && ($0in_delay(sii_l2t0_req[25] == 0,10)) && ($0in_delay(sii_l2t0_req[26] == 1,10)) && ($0in_rising_edge($0in_delay(l2t0_sii_iq_dequeue,10))) && !(sii_wri_ecc4_l0_cycle9 == sii_l2b0_ecc[4]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc4_l0_wri_cycle9
*/

wire sii_wri_ecc5_l0_cycle9 =  (`TOP.cpu.sii_l2t0_req[26] ^ `TOP.cpu.sii_l2t0_req[27] ^ `TOP.cpu.sii_l2t0_req[28] ^ `TOP.cpu.sii_l2t0_req[29] ^ `TOP.cpu.sii_l2t0_req[30] ^ `TOP.cpu.sii_l2t0_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t0_req_vld,10))) && ($0in_delay(sii_l2t0_req[24] == 0,10)) && ($0in_delay(sii_l2t0_req[25] == 0,10)) && ($0in_delay(sii_l2t0_req[26] == 1,10)) && ($0in_rising_edge($0in_delay(l2t0_sii_iq_dequeue,10))) && !(sii_wri_ecc5_l0_cycle9 == sii_l2b0_ecc[5]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc5_l0_wri_cycle9
*/

wire sii_wri_ecc6_l0_cycle9 =  (`TOP.cpu.sii_l2t0_req[0] ^ `TOP.cpu.sii_l2t0_req[1] ^ `TOP.cpu.sii_l2t0_req[2] ^ `TOP.cpu.sii_l2t0_req[4] ^ `TOP.cpu.sii_l2t0_req[5] ^ `TOP.cpu.sii_l2t0_req[7] ^ `TOP.cpu.sii_l2t0_req[10] ^ `TOP.cpu.sii_l2t0_req[11] ^ `TOP.cpu.sii_l2t0_req[12] ^ `TOP.cpu.sii_l2t0_req[14] ^ `TOP.cpu.sii_l2t0_req[17] ^ `TOP.cpu.sii_l2t0_req[18] ^ `TOP.cpu.sii_l2t0_req[21] ^ `TOP.cpu.sii_l2t0_req[23] ^ `TOP.cpu.sii_l2t0_req[24] ^ `TOP.cpu.sii_l2t0_req[26] ^ `TOP.cpu.sii_l2t0_req[27] ^ `TOP.cpu.sii_l2t0_req[29] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t0_req_vld,10))) && ($0in_delay(sii_l2t0_req[24] == 0,10)) && ($0in_delay(sii_l2t0_req[25] == 0,10)) && ($0in_delay(sii_l2t0_req[26] == 1,10)) && ($0in_rising_edge($0in_delay(l2t0_sii_iq_dequeue,10))) && !(sii_wri_ecc6_l0_cycle9 == sii_l2b0_ecc[6]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc6_l0_wri_cycle9
*/

wire sii_wri_ecc0_l0_cycle10 =  (`TOP.cpu.sii_l2t0_req[0] ^ `TOP.cpu.sii_l2t0_req[1] ^ `TOP.cpu.sii_l2t0_req[3] ^ `TOP.cpu.sii_l2t0_req[4] ^ `TOP.cpu.sii_l2t0_req[6] ^ `TOP.cpu.sii_l2t0_req[8] ^ `TOP.cpu.sii_l2t0_req[10] ^ `TOP.cpu.sii_l2t0_req[11] ^ `TOP.cpu.sii_l2t0_req[13] ^ `TOP.cpu.sii_l2t0_req[15] ^ `TOP.cpu.sii_l2t0_req[17] ^ `TOP.cpu.sii_l2t0_req[19] ^ `TOP.cpu.sii_l2t0_req[21] ^ `TOP.cpu.sii_l2t0_req[23] ^ `TOP.cpu.sii_l2t0_req[25] ^ `TOP.cpu.sii_l2t0_req[26] ^ `TOP.cpu.sii_l2t0_req[28] ^ `TOP.cpu.sii_l2t0_req[30] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t0_req_vld,11))) && ($0in_delay(sii_l2t0_req[24] == 0,11)) && ($0in_delay(sii_l2t0_req[25] == 0,11)) && ($0in_delay(sii_l2t0_req[26] == 1,11)) && ($0in_rising_edge($0in_delay(l2t0_sii_iq_dequeue,11))) && !(sii_wri_ecc0_l0_cycle10 == sii_l2b0_ecc[0]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc0_l0_wri_cycle10
*/

wire sii_wri_ecc1_l0_cycle10 =  (`TOP.cpu.sii_l2t0_req[0] ^ `TOP.cpu.sii_l2t0_req[2] ^ `TOP.cpu.sii_l2t0_req[3] ^ `TOP.cpu.sii_l2t0_req[5] ^ `TOP.cpu.sii_l2t0_req[6] ^ `TOP.cpu.sii_l2t0_req[9] ^ `TOP.cpu.sii_l2t0_req[10] ^ `TOP.cpu.sii_l2t0_req[12] ^ `TOP.cpu.sii_l2t0_req[13] ^ `TOP.cpu.sii_l2t0_req[16] ^ `TOP.cpu.sii_l2t0_req[17] ^ `TOP.cpu.sii_l2t0_req[20] ^ `TOP.cpu.sii_l2t0_req[21] ^ `TOP.cpu.sii_l2t0_req[24] ^ `TOP.cpu.sii_l2t0_req[25] ^ `TOP.cpu.sii_l2t0_req[27] ^ `TOP.cpu.sii_l2t0_req[28] ^ `TOP.cpu.sii_l2t0_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t0_req_vld,11))) && ($0in_delay(sii_l2t0_req[24] == 0,11)) && ($0in_delay(sii_l2t0_req[25] == 0,11)) && ($0in_delay(sii_l2t0_req[26] == 1,11)) && ($0in_rising_edge($0in_delay(l2t0_sii_iq_dequeue,11))) && !(sii_wri_ecc1_l0_cycle10 == sii_l2b0_ecc[1]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc1_l0_wri_cycle10
*/

wire sii_wri_ecc2_l0_cycle10 =  (`TOP.cpu.sii_l2t0_req[1] ^ `TOP.cpu.sii_l2t0_req[2] ^ `TOP.cpu.sii_l2t0_req[3] ^ `TOP.cpu.sii_l2t0_req[7] ^ `TOP.cpu.sii_l2t0_req[8] ^ `TOP.cpu.sii_l2t0_req[9] ^ `TOP.cpu.sii_l2t0_req[10] ^ `TOP.cpu.sii_l2t0_req[14] ^ `TOP.cpu.sii_l2t0_req[15] ^ `TOP.cpu.sii_l2t0_req[16] ^ `TOP.cpu.sii_l2t0_req[17] ^ `TOP.cpu.sii_l2t0_req[22] ^ `TOP.cpu.sii_l2t0_req[23] ^ `TOP.cpu.sii_l2t0_req[24] ^ `TOP.cpu.sii_l2t0_req[25] ^ `TOP.cpu.sii_l2t0_req[29] ^ `TOP.cpu.sii_l2t0_req[30] ^ `TOP.cpu.sii_l2t0_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t0_req_vld,11))) && ($0in_delay(sii_l2t0_req[24] == 0,11)) && ($0in_delay(sii_l2t0_req[25] == 0,11)) && ($0in_delay(sii_l2t0_req[26] == 1,11)) && ($0in_rising_edge($0in_delay(l2t0_sii_iq_dequeue,11))) && !(sii_wri_ecc2_l0_cycle10 == sii_l2b0_ecc[2]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc2_l0_wri_cycle10
*/

wire sii_wri_ecc3_l0_cycle10 =  (`TOP.cpu.sii_l2t0_req[4] ^ `TOP.cpu.sii_l2t0_req[5] ^ `TOP.cpu.sii_l2t0_req[6] ^ `TOP.cpu.sii_l2t0_req[7] ^ `TOP.cpu.sii_l2t0_req[8] ^ `TOP.cpu.sii_l2t0_req[9] ^ `TOP.cpu.sii_l2t0_req[10] ^ `TOP.cpu.sii_l2t0_req[18] ^ `TOP.cpu.sii_l2t0_req[19] ^ `TOP.cpu.sii_l2t0_req[20] ^ `TOP.cpu.sii_l2t0_req[21] ^ `TOP.cpu.sii_l2t0_req[22] ^ `TOP.cpu.sii_l2t0_req[23] ^ `TOP.cpu.sii_l2t0_req[24] ^ `TOP.cpu.sii_l2t0_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t0_req_vld,11))) && ($0in_delay(sii_l2t0_req[24] == 0,11)) && ($0in_delay(sii_l2t0_req[25] == 0,11)) && ($0in_delay(sii_l2t0_req[26] == 1,11)) && ($0in_rising_edge($0in_delay(l2t0_sii_iq_dequeue,11))) && !(sii_wri_ecc3_l0_cycle10 == sii_l2b0_ecc[3]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc3_l0_wri_cycle10
*/

wire sii_wri_ecc4_l0_cycle10 =  ( `TOP.cpu.sii_l2t0_req[11] ^ `TOP.cpu.sii_l2t0_req[12] ^ `TOP.cpu.sii_l2t0_req[13] ^ `TOP.cpu.sii_l2t0_req[14] ^ `TOP.cpu.sii_l2t0_req[15] ^ `TOP.cpu.sii_l2t0_req[16] ^ `TOP.cpu.sii_l2t0_req[17] ^ `TOP.cpu.sii_l2t0_req[18] ^ `TOP.cpu.sii_l2t0_req[19] ^ `TOP.cpu.sii_l2t0_req[20] ^ `TOP.cpu.sii_l2t0_req[21] ^ `TOP.cpu.sii_l2t0_req[22] ^ `TOP.cpu.sii_l2t0_req[23] ^ `TOP.cpu.sii_l2t0_req[24] ^ `TOP.cpu.sii_l2t0_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t0_req_vld,11))) && ($0in_delay(sii_l2t0_req[24] == 0,11)) && ($0in_delay(sii_l2t0_req[25] == 0,11)) && ($0in_delay(sii_l2t0_req[26] == 1,11)) && ($0in_rising_edge($0in_delay(l2t0_sii_iq_dequeue,11))) && !(sii_wri_ecc4_l0_cycle10 == sii_l2b0_ecc[4]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc4_l0_wri_cycle10
*/

wire sii_wri_ecc5_l0_cycle10 =  (`TOP.cpu.sii_l2t0_req[26] ^ `TOP.cpu.sii_l2t0_req[27] ^ `TOP.cpu.sii_l2t0_req[28] ^ `TOP.cpu.sii_l2t0_req[29] ^ `TOP.cpu.sii_l2t0_req[30] ^ `TOP.cpu.sii_l2t0_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t0_req_vld,11))) && ($0in_delay(sii_l2t0_req[24] == 0,11)) && ($0in_delay(sii_l2t0_req[25] == 0,11)) && ($0in_delay(sii_l2t0_req[26] == 1,11)) && ($0in_rising_edge($0in_delay(l2t0_sii_iq_dequeue,11))) && !(sii_wri_ecc5_l0_cycle10 == sii_l2b0_ecc[5]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc5_l0_wri_cycle10
*/

wire sii_wri_ecc6_l0_cycle10 =  (`TOP.cpu.sii_l2t0_req[0] ^ `TOP.cpu.sii_l2t0_req[1] ^ `TOP.cpu.sii_l2t0_req[2] ^ `TOP.cpu.sii_l2t0_req[4] ^ `TOP.cpu.sii_l2t0_req[5] ^ `TOP.cpu.sii_l2t0_req[7] ^ `TOP.cpu.sii_l2t0_req[10] ^ `TOP.cpu.sii_l2t0_req[11] ^ `TOP.cpu.sii_l2t0_req[12] ^ `TOP.cpu.sii_l2t0_req[14] ^ `TOP.cpu.sii_l2t0_req[17] ^ `TOP.cpu.sii_l2t0_req[18] ^ `TOP.cpu.sii_l2t0_req[21] ^ `TOP.cpu.sii_l2t0_req[23] ^ `TOP.cpu.sii_l2t0_req[24] ^ `TOP.cpu.sii_l2t0_req[26] ^ `TOP.cpu.sii_l2t0_req[27] ^ `TOP.cpu.sii_l2t0_req[29] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t0_req_vld,11))) && ($0in_delay(sii_l2t0_req[24] == 0,11)) && ($0in_delay(sii_l2t0_req[25] == 0,11)) && ($0in_delay(sii_l2t0_req[26] == 1,11)) && ($0in_rising_edge($0in_delay(l2t0_sii_iq_dequeue,11))) && !(sii_wri_ecc6_l0_cycle10 == sii_l2b0_ecc[6]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc6_l0_wri_cycle10
*/

wire sii_wri_ecc0_l0_cycle11 =  (`TOP.cpu.sii_l2t0_req[0] ^ `TOP.cpu.sii_l2t0_req[1] ^ `TOP.cpu.sii_l2t0_req[3] ^ `TOP.cpu.sii_l2t0_req[4] ^ `TOP.cpu.sii_l2t0_req[6] ^ `TOP.cpu.sii_l2t0_req[8] ^ `TOP.cpu.sii_l2t0_req[10] ^ `TOP.cpu.sii_l2t0_req[11] ^ `TOP.cpu.sii_l2t0_req[13] ^ `TOP.cpu.sii_l2t0_req[15] ^ `TOP.cpu.sii_l2t0_req[17] ^ `TOP.cpu.sii_l2t0_req[19] ^ `TOP.cpu.sii_l2t0_req[21] ^ `TOP.cpu.sii_l2t0_req[23] ^ `TOP.cpu.sii_l2t0_req[25] ^ `TOP.cpu.sii_l2t0_req[26] ^ `TOP.cpu.sii_l2t0_req[28] ^ `TOP.cpu.sii_l2t0_req[30] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t0_req_vld,12))) && ($0in_delay(sii_l2t0_req[24] == 0,12)) && ($0in_delay(sii_l2t0_req[25] == 0,12)) && ($0in_delay(sii_l2t0_req[26] == 1,12)) && ($0in_rising_edge($0in_delay(l2t0_sii_iq_dequeue,12))) && !(sii_wri_ecc0_l0_cycle11 == sii_l2b0_ecc[0]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc0_l0_wri_cycle11
*/

wire sii_wri_ecc1_l0_cycle11 =  (`TOP.cpu.sii_l2t0_req[0] ^ `TOP.cpu.sii_l2t0_req[2] ^ `TOP.cpu.sii_l2t0_req[3] ^ `TOP.cpu.sii_l2t0_req[5] ^ `TOP.cpu.sii_l2t0_req[6] ^ `TOP.cpu.sii_l2t0_req[9] ^ `TOP.cpu.sii_l2t0_req[10] ^ `TOP.cpu.sii_l2t0_req[12] ^ `TOP.cpu.sii_l2t0_req[13] ^ `TOP.cpu.sii_l2t0_req[16] ^ `TOP.cpu.sii_l2t0_req[17] ^ `TOP.cpu.sii_l2t0_req[20] ^ `TOP.cpu.sii_l2t0_req[21] ^ `TOP.cpu.sii_l2t0_req[24] ^ `TOP.cpu.sii_l2t0_req[25] ^ `TOP.cpu.sii_l2t0_req[27] ^ `TOP.cpu.sii_l2t0_req[28] ^ `TOP.cpu.sii_l2t0_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t0_req_vld,12))) && ($0in_delay(sii_l2t0_req[24] == 0,12)) && ($0in_delay(sii_l2t0_req[25] == 0,12)) && ($0in_delay(sii_l2t0_req[26] == 1,12)) && ($0in_rising_edge($0in_delay(l2t0_sii_iq_dequeue,12))) && !(sii_wri_ecc1_l0_cycle11 == sii_l2b0_ecc[1]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc1_l0_wri_cycle11
*/

wire sii_wri_ecc2_l0_cycle11 =  (`TOP.cpu.sii_l2t0_req[1] ^ `TOP.cpu.sii_l2t0_req[2] ^ `TOP.cpu.sii_l2t0_req[3] ^ `TOP.cpu.sii_l2t0_req[7] ^ `TOP.cpu.sii_l2t0_req[8] ^ `TOP.cpu.sii_l2t0_req[9] ^ `TOP.cpu.sii_l2t0_req[10] ^ `TOP.cpu.sii_l2t0_req[14] ^ `TOP.cpu.sii_l2t0_req[15] ^ `TOP.cpu.sii_l2t0_req[16] ^ `TOP.cpu.sii_l2t0_req[17] ^ `TOP.cpu.sii_l2t0_req[22] ^ `TOP.cpu.sii_l2t0_req[23] ^ `TOP.cpu.sii_l2t0_req[24] ^ `TOP.cpu.sii_l2t0_req[25] ^ `TOP.cpu.sii_l2t0_req[29] ^ `TOP.cpu.sii_l2t0_req[30] ^ `TOP.cpu.sii_l2t0_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t0_req_vld,12))) && ($0in_delay(sii_l2t0_req[24] == 0,12)) && ($0in_delay(sii_l2t0_req[25] == 0,12)) && ($0in_delay(sii_l2t0_req[26] == 1,12)) && ($0in_rising_edge($0in_delay(l2t0_sii_iq_dequeue,12))) && !(sii_wri_ecc2_l0_cycle11 == sii_l2b0_ecc[2]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc2_l0_wri_cycle11
*/

wire sii_wri_ecc3_l0_cycle11 =  (`TOP.cpu.sii_l2t0_req[4] ^ `TOP.cpu.sii_l2t0_req[5] ^ `TOP.cpu.sii_l2t0_req[6] ^ `TOP.cpu.sii_l2t0_req[7] ^ `TOP.cpu.sii_l2t0_req[8] ^ `TOP.cpu.sii_l2t0_req[9] ^ `TOP.cpu.sii_l2t0_req[10] ^ `TOP.cpu.sii_l2t0_req[18] ^ `TOP.cpu.sii_l2t0_req[19] ^ `TOP.cpu.sii_l2t0_req[20] ^ `TOP.cpu.sii_l2t0_req[21] ^ `TOP.cpu.sii_l2t0_req[22] ^ `TOP.cpu.sii_l2t0_req[23] ^ `TOP.cpu.sii_l2t0_req[24] ^ `TOP.cpu.sii_l2t0_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t0_req_vld,12))) && ($0in_delay(sii_l2t0_req[24] == 0,12)) && ($0in_delay(sii_l2t0_req[25] == 0,12)) && ($0in_delay(sii_l2t0_req[26] == 1,12)) && ($0in_rising_edge($0in_delay(l2t0_sii_iq_dequeue,12))) && !(sii_wri_ecc3_l0_cycle11 == sii_l2b0_ecc[3]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc3_l0_wri_cycle11
*/

wire sii_wri_ecc4_l0_cycle11 =  ( `TOP.cpu.sii_l2t0_req[11] ^ `TOP.cpu.sii_l2t0_req[12] ^ `TOP.cpu.sii_l2t0_req[13] ^ `TOP.cpu.sii_l2t0_req[14] ^ `TOP.cpu.sii_l2t0_req[15] ^ `TOP.cpu.sii_l2t0_req[16] ^ `TOP.cpu.sii_l2t0_req[17] ^ `TOP.cpu.sii_l2t0_req[18] ^ `TOP.cpu.sii_l2t0_req[19] ^ `TOP.cpu.sii_l2t0_req[20] ^ `TOP.cpu.sii_l2t0_req[21] ^ `TOP.cpu.sii_l2t0_req[22] ^ `TOP.cpu.sii_l2t0_req[23] ^ `TOP.cpu.sii_l2t0_req[24] ^ `TOP.cpu.sii_l2t0_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t0_req_vld,12))) && ($0in_delay(sii_l2t0_req[24] == 0,12)) && ($0in_delay(sii_l2t0_req[25] == 0,12)) && ($0in_delay(sii_l2t0_req[26] == 1,12)) && ($0in_rising_edge($0in_delay(l2t0_sii_iq_dequeue,12))) && !(sii_wri_ecc4_l0_cycle11 == sii_l2b0_ecc[4]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc4_l0_wri_cycle11
*/

wire sii_wri_ecc5_l0_cycle11 =  (`TOP.cpu.sii_l2t0_req[26] ^ `TOP.cpu.sii_l2t0_req[27] ^ `TOP.cpu.sii_l2t0_req[28] ^ `TOP.cpu.sii_l2t0_req[29] ^ `TOP.cpu.sii_l2t0_req[30] ^ `TOP.cpu.sii_l2t0_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t0_req_vld,12))) && ($0in_delay(sii_l2t0_req[24] == 0,12)) && ($0in_delay(sii_l2t0_req[25] == 0,12)) && ($0in_delay(sii_l2t0_req[26] == 1,12)) && ($0in_rising_edge($0in_delay(l2t0_sii_iq_dequeue,12))) && !(sii_wri_ecc5_l0_cycle11 == sii_l2b0_ecc[5]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc5_l0_wri_cycle11
*/

wire sii_wri_ecc6_l0_cycle11 =  (`TOP.cpu.sii_l2t0_req[0] ^ `TOP.cpu.sii_l2t0_req[1] ^ `TOP.cpu.sii_l2t0_req[2] ^ `TOP.cpu.sii_l2t0_req[4] ^ `TOP.cpu.sii_l2t0_req[5] ^ `TOP.cpu.sii_l2t0_req[7] ^ `TOP.cpu.sii_l2t0_req[10] ^ `TOP.cpu.sii_l2t0_req[11] ^ `TOP.cpu.sii_l2t0_req[12] ^ `TOP.cpu.sii_l2t0_req[14] ^ `TOP.cpu.sii_l2t0_req[17] ^ `TOP.cpu.sii_l2t0_req[18] ^ `TOP.cpu.sii_l2t0_req[21] ^ `TOP.cpu.sii_l2t0_req[23] ^ `TOP.cpu.sii_l2t0_req[24] ^ `TOP.cpu.sii_l2t0_req[26] ^ `TOP.cpu.sii_l2t0_req[27] ^ `TOP.cpu.sii_l2t0_req[29] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t0_req_vld,12))) && ($0in_delay(sii_l2t0_req[24] == 0,12)) && ($0in_delay(sii_l2t0_req[25] == 0,12)) && ($0in_delay(sii_l2t0_req[26] == 1,12)) && ($0in_rising_edge($0in_delay(l2t0_sii_iq_dequeue,12))) && !(sii_wri_ecc6_l0_cycle11 == sii_l2b0_ecc[6]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc6_l0_wri_cycle11
*/

wire sii_wri_ecc0_l0_cycle12 =  (`TOP.cpu.sii_l2t0_req[0] ^ `TOP.cpu.sii_l2t0_req[1] ^ `TOP.cpu.sii_l2t0_req[3] ^ `TOP.cpu.sii_l2t0_req[4] ^ `TOP.cpu.sii_l2t0_req[6] ^ `TOP.cpu.sii_l2t0_req[8] ^ `TOP.cpu.sii_l2t0_req[10] ^ `TOP.cpu.sii_l2t0_req[11] ^ `TOP.cpu.sii_l2t0_req[13] ^ `TOP.cpu.sii_l2t0_req[15] ^ `TOP.cpu.sii_l2t0_req[17] ^ `TOP.cpu.sii_l2t0_req[19] ^ `TOP.cpu.sii_l2t0_req[21] ^ `TOP.cpu.sii_l2t0_req[23] ^ `TOP.cpu.sii_l2t0_req[25] ^ `TOP.cpu.sii_l2t0_req[26] ^ `TOP.cpu.sii_l2t0_req[28] ^ `TOP.cpu.sii_l2t0_req[30] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t0_req_vld,13))) && ($0in_delay(sii_l2t0_req[24] == 0,13)) && ($0in_delay(sii_l2t0_req[25] == 0,13)) && ($0in_delay(sii_l2t0_req[26] == 1,13)) && ($0in_rising_edge($0in_delay(l2t0_sii_iq_dequeue,13))) && !(sii_wri_ecc0_l0_cycle12 == sii_l2b0_ecc[0]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc0_l0_wri_cycle12
*/

wire sii_wri_ecc1_l0_cycle12 =  (`TOP.cpu.sii_l2t0_req[0] ^ `TOP.cpu.sii_l2t0_req[2] ^ `TOP.cpu.sii_l2t0_req[3] ^ `TOP.cpu.sii_l2t0_req[5] ^ `TOP.cpu.sii_l2t0_req[6] ^ `TOP.cpu.sii_l2t0_req[9] ^ `TOP.cpu.sii_l2t0_req[10] ^ `TOP.cpu.sii_l2t0_req[12] ^ `TOP.cpu.sii_l2t0_req[13] ^ `TOP.cpu.sii_l2t0_req[16] ^ `TOP.cpu.sii_l2t0_req[17] ^ `TOP.cpu.sii_l2t0_req[20] ^ `TOP.cpu.sii_l2t0_req[21] ^ `TOP.cpu.sii_l2t0_req[24] ^ `TOP.cpu.sii_l2t0_req[25] ^ `TOP.cpu.sii_l2t0_req[27] ^ `TOP.cpu.sii_l2t0_req[28] ^ `TOP.cpu.sii_l2t0_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t0_req_vld,13))) && ($0in_delay(sii_l2t0_req[24] == 0,13)) && ($0in_delay(sii_l2t0_req[25] == 0,13)) && ($0in_delay(sii_l2t0_req[26] == 1,13)) && ($0in_rising_edge($0in_delay(l2t0_sii_iq_dequeue,13))) && !(sii_wri_ecc1_l0_cycle12 == sii_l2b0_ecc[1]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc1_l0_wri_cycle12
*/

wire sii_wri_ecc2_l0_cycle12 =  (`TOP.cpu.sii_l2t0_req[1] ^ `TOP.cpu.sii_l2t0_req[2] ^ `TOP.cpu.sii_l2t0_req[3] ^ `TOP.cpu.sii_l2t0_req[7] ^ `TOP.cpu.sii_l2t0_req[8] ^ `TOP.cpu.sii_l2t0_req[9] ^ `TOP.cpu.sii_l2t0_req[10] ^ `TOP.cpu.sii_l2t0_req[14] ^ `TOP.cpu.sii_l2t0_req[15] ^ `TOP.cpu.sii_l2t0_req[16] ^ `TOP.cpu.sii_l2t0_req[17] ^ `TOP.cpu.sii_l2t0_req[22] ^ `TOP.cpu.sii_l2t0_req[23] ^ `TOP.cpu.sii_l2t0_req[24] ^ `TOP.cpu.sii_l2t0_req[25] ^ `TOP.cpu.sii_l2t0_req[29] ^ `TOP.cpu.sii_l2t0_req[30] ^ `TOP.cpu.sii_l2t0_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t0_req_vld,13))) && ($0in_delay(sii_l2t0_req[24] == 0,13)) && ($0in_delay(sii_l2t0_req[25] == 0,13)) && ($0in_delay(sii_l2t0_req[26] == 1,13)) && ($0in_rising_edge($0in_delay(l2t0_sii_iq_dequeue,13))) && !(sii_wri_ecc2_l0_cycle12 == sii_l2b0_ecc[2]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc2_l0_wri_cycle12
*/

wire sii_wri_ecc3_l0_cycle12 =  (`TOP.cpu.sii_l2t0_req[4] ^ `TOP.cpu.sii_l2t0_req[5] ^ `TOP.cpu.sii_l2t0_req[6] ^ `TOP.cpu.sii_l2t0_req[7] ^ `TOP.cpu.sii_l2t0_req[8] ^ `TOP.cpu.sii_l2t0_req[9] ^ `TOP.cpu.sii_l2t0_req[10] ^ `TOP.cpu.sii_l2t0_req[18] ^ `TOP.cpu.sii_l2t0_req[19] ^ `TOP.cpu.sii_l2t0_req[20] ^ `TOP.cpu.sii_l2t0_req[21] ^ `TOP.cpu.sii_l2t0_req[22] ^ `TOP.cpu.sii_l2t0_req[23] ^ `TOP.cpu.sii_l2t0_req[24] ^ `TOP.cpu.sii_l2t0_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t0_req_vld,13))) && ($0in_delay(sii_l2t0_req[24] == 0,13)) && ($0in_delay(sii_l2t0_req[25] == 0,13)) && ($0in_delay(sii_l2t0_req[26] == 1,13)) && ($0in_rising_edge($0in_delay(l2t0_sii_iq_dequeue,13))) && !(sii_wri_ecc3_l0_cycle12 == sii_l2b0_ecc[3]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc3_l0_wri_cycle12
*/

wire sii_wri_ecc4_l0_cycle12 =  ( `TOP.cpu.sii_l2t0_req[11] ^ `TOP.cpu.sii_l2t0_req[12] ^ `TOP.cpu.sii_l2t0_req[13] ^ `TOP.cpu.sii_l2t0_req[14] ^ `TOP.cpu.sii_l2t0_req[15] ^ `TOP.cpu.sii_l2t0_req[16] ^ `TOP.cpu.sii_l2t0_req[17] ^ `TOP.cpu.sii_l2t0_req[18] ^ `TOP.cpu.sii_l2t0_req[19] ^ `TOP.cpu.sii_l2t0_req[20] ^ `TOP.cpu.sii_l2t0_req[21] ^ `TOP.cpu.sii_l2t0_req[22] ^ `TOP.cpu.sii_l2t0_req[23] ^ `TOP.cpu.sii_l2t0_req[24] ^ `TOP.cpu.sii_l2t0_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t0_req_vld,13))) && ($0in_delay(sii_l2t0_req[24] == 0,13)) && ($0in_delay(sii_l2t0_req[25] == 0,13)) && ($0in_delay(sii_l2t0_req[26] == 1,13)) && ($0in_rising_edge($0in_delay(l2t0_sii_iq_dequeue,13))) && !(sii_wri_ecc4_l0_cycle12 == sii_l2b0_ecc[4]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc4_l0_wri_cycle12
*/

wire sii_wri_ecc5_l0_cycle12 =  (`TOP.cpu.sii_l2t0_req[26] ^ `TOP.cpu.sii_l2t0_req[27] ^ `TOP.cpu.sii_l2t0_req[28] ^ `TOP.cpu.sii_l2t0_req[29] ^ `TOP.cpu.sii_l2t0_req[30] ^ `TOP.cpu.sii_l2t0_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t0_req_vld,13))) && ($0in_delay(sii_l2t0_req[24] == 0,13)) && ($0in_delay(sii_l2t0_req[25] == 0,13)) && ($0in_delay(sii_l2t0_req[26] == 1,13)) && ($0in_rising_edge($0in_delay(l2t0_sii_iq_dequeue,13))) && !(sii_wri_ecc5_l0_cycle12 == sii_l2b0_ecc[5]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc5_l0_wri_cycle12
*/

wire sii_wri_ecc6_l0_cycle12 =  (`TOP.cpu.sii_l2t0_req[0] ^ `TOP.cpu.sii_l2t0_req[1] ^ `TOP.cpu.sii_l2t0_req[2] ^ `TOP.cpu.sii_l2t0_req[4] ^ `TOP.cpu.sii_l2t0_req[5] ^ `TOP.cpu.sii_l2t0_req[7] ^ `TOP.cpu.sii_l2t0_req[10] ^ `TOP.cpu.sii_l2t0_req[11] ^ `TOP.cpu.sii_l2t0_req[12] ^ `TOP.cpu.sii_l2t0_req[14] ^ `TOP.cpu.sii_l2t0_req[17] ^ `TOP.cpu.sii_l2t0_req[18] ^ `TOP.cpu.sii_l2t0_req[21] ^ `TOP.cpu.sii_l2t0_req[23] ^ `TOP.cpu.sii_l2t0_req[24] ^ `TOP.cpu.sii_l2t0_req[26] ^ `TOP.cpu.sii_l2t0_req[27] ^ `TOP.cpu.sii_l2t0_req[29] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t0_req_vld,13))) && ($0in_delay(sii_l2t0_req[24] == 0,13)) && ($0in_delay(sii_l2t0_req[25] == 0,13)) && ($0in_delay(sii_l2t0_req[26] == 1,13)) && ($0in_rising_edge($0in_delay(l2t0_sii_iq_dequeue,13))) && !(sii_wri_ecc6_l0_cycle12 == sii_l2b0_ecc[6]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc6_l0_wri_cycle12
*/

wire sii_wri_ecc0_l0_cycle13 =  (`TOP.cpu.sii_l2t0_req[0] ^ `TOP.cpu.sii_l2t0_req[1] ^ `TOP.cpu.sii_l2t0_req[3] ^ `TOP.cpu.sii_l2t0_req[4] ^ `TOP.cpu.sii_l2t0_req[6] ^ `TOP.cpu.sii_l2t0_req[8] ^ `TOP.cpu.sii_l2t0_req[10] ^ `TOP.cpu.sii_l2t0_req[11] ^ `TOP.cpu.sii_l2t0_req[13] ^ `TOP.cpu.sii_l2t0_req[15] ^ `TOP.cpu.sii_l2t0_req[17] ^ `TOP.cpu.sii_l2t0_req[19] ^ `TOP.cpu.sii_l2t0_req[21] ^ `TOP.cpu.sii_l2t0_req[23] ^ `TOP.cpu.sii_l2t0_req[25] ^ `TOP.cpu.sii_l2t0_req[26] ^ `TOP.cpu.sii_l2t0_req[28] ^ `TOP.cpu.sii_l2t0_req[30] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t0_req_vld,14))) && ($0in_delay(sii_l2t0_req[24] == 0,14)) && ($0in_delay(sii_l2t0_req[25] == 0,14)) && ($0in_delay(sii_l2t0_req[26] == 1,14)) && ($0in_rising_edge($0in_delay(l2t0_sii_iq_dequeue,14))) && !(sii_wri_ecc0_l0_cycle13 == sii_l2b0_ecc[0]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc0_l0_wri_cycle13
*/

wire sii_wri_ecc1_l0_cycle13 =  (`TOP.cpu.sii_l2t0_req[0] ^ `TOP.cpu.sii_l2t0_req[2] ^ `TOP.cpu.sii_l2t0_req[3] ^ `TOP.cpu.sii_l2t0_req[5] ^ `TOP.cpu.sii_l2t0_req[6] ^ `TOP.cpu.sii_l2t0_req[9] ^ `TOP.cpu.sii_l2t0_req[10] ^ `TOP.cpu.sii_l2t0_req[12] ^ `TOP.cpu.sii_l2t0_req[13] ^ `TOP.cpu.sii_l2t0_req[16] ^ `TOP.cpu.sii_l2t0_req[17] ^ `TOP.cpu.sii_l2t0_req[20] ^ `TOP.cpu.sii_l2t0_req[21] ^ `TOP.cpu.sii_l2t0_req[24] ^ `TOP.cpu.sii_l2t0_req[25] ^ `TOP.cpu.sii_l2t0_req[27] ^ `TOP.cpu.sii_l2t0_req[28] ^ `TOP.cpu.sii_l2t0_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t0_req_vld,14))) && ($0in_delay(sii_l2t0_req[24] == 0,14)) && ($0in_delay(sii_l2t0_req[25] == 0,14)) && ($0in_delay(sii_l2t0_req[26] == 1,14)) && ($0in_rising_edge($0in_delay(l2t0_sii_iq_dequeue,14))) && !(sii_wri_ecc1_l0_cycle13 == sii_l2b0_ecc[1]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc1_l0_wri_cycle13
*/

wire sii_wri_ecc2_l0_cycle13 =  (`TOP.cpu.sii_l2t0_req[1] ^ `TOP.cpu.sii_l2t0_req[2] ^ `TOP.cpu.sii_l2t0_req[3] ^ `TOP.cpu.sii_l2t0_req[7] ^ `TOP.cpu.sii_l2t0_req[8] ^ `TOP.cpu.sii_l2t0_req[9] ^ `TOP.cpu.sii_l2t0_req[10] ^ `TOP.cpu.sii_l2t0_req[14] ^ `TOP.cpu.sii_l2t0_req[15] ^ `TOP.cpu.sii_l2t0_req[16] ^ `TOP.cpu.sii_l2t0_req[17] ^ `TOP.cpu.sii_l2t0_req[22] ^ `TOP.cpu.sii_l2t0_req[23] ^ `TOP.cpu.sii_l2t0_req[24] ^ `TOP.cpu.sii_l2t0_req[25] ^ `TOP.cpu.sii_l2t0_req[29] ^ `TOP.cpu.sii_l2t0_req[30] ^ `TOP.cpu.sii_l2t0_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t0_req_vld,14))) && ($0in_delay(sii_l2t0_req[24] == 0,14)) && ($0in_delay(sii_l2t0_req[25] == 0,14)) && ($0in_delay(sii_l2t0_req[26] == 1,14)) && ($0in_rising_edge($0in_delay(l2t0_sii_iq_dequeue,14))) && !(sii_wri_ecc2_l0_cycle13 == sii_l2b0_ecc[2]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc2_l0_wri_cycle13
*/

wire sii_wri_ecc3_l0_cycle13 =  (`TOP.cpu.sii_l2t0_req[4] ^ `TOP.cpu.sii_l2t0_req[5] ^ `TOP.cpu.sii_l2t0_req[6] ^ `TOP.cpu.sii_l2t0_req[7] ^ `TOP.cpu.sii_l2t0_req[8] ^ `TOP.cpu.sii_l2t0_req[9] ^ `TOP.cpu.sii_l2t0_req[10] ^ `TOP.cpu.sii_l2t0_req[18] ^ `TOP.cpu.sii_l2t0_req[19] ^ `TOP.cpu.sii_l2t0_req[20] ^ `TOP.cpu.sii_l2t0_req[21] ^ `TOP.cpu.sii_l2t0_req[22] ^ `TOP.cpu.sii_l2t0_req[23] ^ `TOP.cpu.sii_l2t0_req[24] ^ `TOP.cpu.sii_l2t0_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t0_req_vld,14))) && ($0in_delay(sii_l2t0_req[24] == 0,14)) && ($0in_delay(sii_l2t0_req[25] == 0,14)) && ($0in_delay(sii_l2t0_req[26] == 1,14)) && ($0in_rising_edge($0in_delay(l2t0_sii_iq_dequeue,14))) && !(sii_wri_ecc3_l0_cycle13 == sii_l2b0_ecc[3]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc3_l0_wri_cycle13
*/

wire sii_wri_ecc4_l0_cycle13 =  ( `TOP.cpu.sii_l2t0_req[11] ^ `TOP.cpu.sii_l2t0_req[12] ^ `TOP.cpu.sii_l2t0_req[13] ^ `TOP.cpu.sii_l2t0_req[14] ^ `TOP.cpu.sii_l2t0_req[15] ^ `TOP.cpu.sii_l2t0_req[16] ^ `TOP.cpu.sii_l2t0_req[17] ^ `TOP.cpu.sii_l2t0_req[18] ^ `TOP.cpu.sii_l2t0_req[19] ^ `TOP.cpu.sii_l2t0_req[20] ^ `TOP.cpu.sii_l2t0_req[21] ^ `TOP.cpu.sii_l2t0_req[22] ^ `TOP.cpu.sii_l2t0_req[23] ^ `TOP.cpu.sii_l2t0_req[24] ^ `TOP.cpu.sii_l2t0_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t0_req_vld,14))) && ($0in_delay(sii_l2t0_req[24] == 0,14)) && ($0in_delay(sii_l2t0_req[25] == 0,14)) && ($0in_delay(sii_l2t0_req[26] == 1,14)) && ($0in_rising_edge($0in_delay(l2t0_sii_iq_dequeue,14))) && !(sii_wri_ecc4_l0_cycle13 == sii_l2b0_ecc[4]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc4_l0_wri_cycle13
*/

wire sii_wri_ecc5_l0_cycle13 =  (`TOP.cpu.sii_l2t0_req[26] ^ `TOP.cpu.sii_l2t0_req[27] ^ `TOP.cpu.sii_l2t0_req[28] ^ `TOP.cpu.sii_l2t0_req[29] ^ `TOP.cpu.sii_l2t0_req[30] ^ `TOP.cpu.sii_l2t0_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t0_req_vld,14))) && ($0in_delay(sii_l2t0_req[24] == 0,14)) && ($0in_delay(sii_l2t0_req[25] == 0,14)) && ($0in_delay(sii_l2t0_req[26] == 1,14)) && ($0in_rising_edge($0in_delay(l2t0_sii_iq_dequeue,14))) && !(sii_wri_ecc5_l0_cycle13 == sii_l2b0_ecc[5]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc5_l0_wri_cycle13
*/

wire sii_wri_ecc6_l0_cycle13 =  (`TOP.cpu.sii_l2t0_req[0] ^ `TOP.cpu.sii_l2t0_req[1] ^ `TOP.cpu.sii_l2t0_req[2] ^ `TOP.cpu.sii_l2t0_req[4] ^ `TOP.cpu.sii_l2t0_req[5] ^ `TOP.cpu.sii_l2t0_req[7] ^ `TOP.cpu.sii_l2t0_req[10] ^ `TOP.cpu.sii_l2t0_req[11] ^ `TOP.cpu.sii_l2t0_req[12] ^ `TOP.cpu.sii_l2t0_req[14] ^ `TOP.cpu.sii_l2t0_req[17] ^ `TOP.cpu.sii_l2t0_req[18] ^ `TOP.cpu.sii_l2t0_req[21] ^ `TOP.cpu.sii_l2t0_req[23] ^ `TOP.cpu.sii_l2t0_req[24] ^ `TOP.cpu.sii_l2t0_req[26] ^ `TOP.cpu.sii_l2t0_req[27] ^ `TOP.cpu.sii_l2t0_req[29] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t0_req_vld,14))) && ($0in_delay(sii_l2t0_req[24] == 0,14)) && ($0in_delay(sii_l2t0_req[25] == 0,14)) && ($0in_delay(sii_l2t0_req[26] == 1,14)) && ($0in_rising_edge($0in_delay(l2t0_sii_iq_dequeue,14))) && !(sii_wri_ecc6_l0_cycle13 == sii_l2b0_ecc[6]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc6_l0_wri_cycle13
*/

wire sii_wri_ecc0_l0_cycle14 =  (`TOP.cpu.sii_l2t0_req[0] ^ `TOP.cpu.sii_l2t0_req[1] ^ `TOP.cpu.sii_l2t0_req[3] ^ `TOP.cpu.sii_l2t0_req[4] ^ `TOP.cpu.sii_l2t0_req[6] ^ `TOP.cpu.sii_l2t0_req[8] ^ `TOP.cpu.sii_l2t0_req[10] ^ `TOP.cpu.sii_l2t0_req[11] ^ `TOP.cpu.sii_l2t0_req[13] ^ `TOP.cpu.sii_l2t0_req[15] ^ `TOP.cpu.sii_l2t0_req[17] ^ `TOP.cpu.sii_l2t0_req[19] ^ `TOP.cpu.sii_l2t0_req[21] ^ `TOP.cpu.sii_l2t0_req[23] ^ `TOP.cpu.sii_l2t0_req[25] ^ `TOP.cpu.sii_l2t0_req[26] ^ `TOP.cpu.sii_l2t0_req[28] ^ `TOP.cpu.sii_l2t0_req[30] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t0_req_vld,15))) && ($0in_delay(sii_l2t0_req[24] == 0,15)) && ($0in_delay(sii_l2t0_req[25] == 0,15)) && ($0in_delay(sii_l2t0_req[26] == 1,15)) && ($0in_rising_edge($0in_delay(l2t0_sii_iq_dequeue,15))) && !(sii_wri_ecc0_l0_cycle14 == sii_l2b0_ecc[0]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc0_l0_wri_cycle14
*/

wire sii_wri_ecc1_l0_cycle14 =  (`TOP.cpu.sii_l2t0_req[0] ^ `TOP.cpu.sii_l2t0_req[2] ^ `TOP.cpu.sii_l2t0_req[3] ^ `TOP.cpu.sii_l2t0_req[5] ^ `TOP.cpu.sii_l2t0_req[6] ^ `TOP.cpu.sii_l2t0_req[9] ^ `TOP.cpu.sii_l2t0_req[10] ^ `TOP.cpu.sii_l2t0_req[12] ^ `TOP.cpu.sii_l2t0_req[13] ^ `TOP.cpu.sii_l2t0_req[16] ^ `TOP.cpu.sii_l2t0_req[17] ^ `TOP.cpu.sii_l2t0_req[20] ^ `TOP.cpu.sii_l2t0_req[21] ^ `TOP.cpu.sii_l2t0_req[24] ^ `TOP.cpu.sii_l2t0_req[25] ^ `TOP.cpu.sii_l2t0_req[27] ^ `TOP.cpu.sii_l2t0_req[28] ^ `TOP.cpu.sii_l2t0_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t0_req_vld,15))) && ($0in_delay(sii_l2t0_req[24] == 0,15)) && ($0in_delay(sii_l2t0_req[25] == 0,15)) && ($0in_delay(sii_l2t0_req[26] == 1,15)) && ($0in_rising_edge($0in_delay(l2t0_sii_iq_dequeue,15))) && !(sii_wri_ecc1_l0_cycle14 == sii_l2b0_ecc[1]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc1_l0_wri_cycle14
*/

wire sii_wri_ecc2_l0_cycle14 =  (`TOP.cpu.sii_l2t0_req[1] ^ `TOP.cpu.sii_l2t0_req[2] ^ `TOP.cpu.sii_l2t0_req[3] ^ `TOP.cpu.sii_l2t0_req[7] ^ `TOP.cpu.sii_l2t0_req[8] ^ `TOP.cpu.sii_l2t0_req[9] ^ `TOP.cpu.sii_l2t0_req[10] ^ `TOP.cpu.sii_l2t0_req[14] ^ `TOP.cpu.sii_l2t0_req[15] ^ `TOP.cpu.sii_l2t0_req[16] ^ `TOP.cpu.sii_l2t0_req[17] ^ `TOP.cpu.sii_l2t0_req[22] ^ `TOP.cpu.sii_l2t0_req[23] ^ `TOP.cpu.sii_l2t0_req[24] ^ `TOP.cpu.sii_l2t0_req[25] ^ `TOP.cpu.sii_l2t0_req[29] ^ `TOP.cpu.sii_l2t0_req[30] ^ `TOP.cpu.sii_l2t0_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t0_req_vld,15))) && ($0in_delay(sii_l2t0_req[24] == 0,15)) && ($0in_delay(sii_l2t0_req[25] == 0,15)) && ($0in_delay(sii_l2t0_req[26] == 1,15)) && ($0in_rising_edge($0in_delay(l2t0_sii_iq_dequeue,15))) && !(sii_wri_ecc2_l0_cycle14 == sii_l2b0_ecc[2]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc2_l0_wri_cycle14
*/

wire sii_wri_ecc3_l0_cycle14 =  (`TOP.cpu.sii_l2t0_req[4] ^ `TOP.cpu.sii_l2t0_req[5] ^ `TOP.cpu.sii_l2t0_req[6] ^ `TOP.cpu.sii_l2t0_req[7] ^ `TOP.cpu.sii_l2t0_req[8] ^ `TOP.cpu.sii_l2t0_req[9] ^ `TOP.cpu.sii_l2t0_req[10] ^ `TOP.cpu.sii_l2t0_req[18] ^ `TOP.cpu.sii_l2t0_req[19] ^ `TOP.cpu.sii_l2t0_req[20] ^ `TOP.cpu.sii_l2t0_req[21] ^ `TOP.cpu.sii_l2t0_req[22] ^ `TOP.cpu.sii_l2t0_req[23] ^ `TOP.cpu.sii_l2t0_req[24] ^ `TOP.cpu.sii_l2t0_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t0_req_vld,15))) && ($0in_delay(sii_l2t0_req[24] == 0,15)) && ($0in_delay(sii_l2t0_req[25] == 0,15)) && ($0in_delay(sii_l2t0_req[26] == 1,15)) && ($0in_rising_edge($0in_delay(l2t0_sii_iq_dequeue,15))) && !(sii_wri_ecc3_l0_cycle14 == sii_l2b0_ecc[3]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc3_l0_wri_cycle14
*/

wire sii_wri_ecc4_l0_cycle14 =  ( `TOP.cpu.sii_l2t0_req[11] ^ `TOP.cpu.sii_l2t0_req[12] ^ `TOP.cpu.sii_l2t0_req[13] ^ `TOP.cpu.sii_l2t0_req[14] ^ `TOP.cpu.sii_l2t0_req[15] ^ `TOP.cpu.sii_l2t0_req[16] ^ `TOP.cpu.sii_l2t0_req[17] ^ `TOP.cpu.sii_l2t0_req[18] ^ `TOP.cpu.sii_l2t0_req[19] ^ `TOP.cpu.sii_l2t0_req[20] ^ `TOP.cpu.sii_l2t0_req[21] ^ `TOP.cpu.sii_l2t0_req[22] ^ `TOP.cpu.sii_l2t0_req[23] ^ `TOP.cpu.sii_l2t0_req[24] ^ `TOP.cpu.sii_l2t0_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t0_req_vld,15))) && ($0in_delay(sii_l2t0_req[24] == 0,15)) && ($0in_delay(sii_l2t0_req[25] == 0,15)) && ($0in_delay(sii_l2t0_req[26] == 1,15)) && ($0in_rising_edge($0in_delay(l2t0_sii_iq_dequeue,15))) && !(sii_wri_ecc4_l0_cycle14 == sii_l2b0_ecc[4]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc4_l0_wri_cycle14
*/

wire sii_wri_ecc5_l0_cycle14 =  (`TOP.cpu.sii_l2t0_req[26] ^ `TOP.cpu.sii_l2t0_req[27] ^ `TOP.cpu.sii_l2t0_req[28] ^ `TOP.cpu.sii_l2t0_req[29] ^ `TOP.cpu.sii_l2t0_req[30] ^ `TOP.cpu.sii_l2t0_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t0_req_vld,15))) && ($0in_delay(sii_l2t0_req[24] == 0,15)) && ($0in_delay(sii_l2t0_req[25] == 0,15)) && ($0in_delay(sii_l2t0_req[26] == 1,15)) && ($0in_rising_edge($0in_delay(l2t0_sii_iq_dequeue,15))) && !(sii_wri_ecc5_l0_cycle14 == sii_l2b0_ecc[5]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc5_l0_wri_cycle14
*/

wire sii_wri_ecc6_l0_cycle14 =  (`TOP.cpu.sii_l2t0_req[0] ^ `TOP.cpu.sii_l2t0_req[1] ^ `TOP.cpu.sii_l2t0_req[2] ^ `TOP.cpu.sii_l2t0_req[4] ^ `TOP.cpu.sii_l2t0_req[5] ^ `TOP.cpu.sii_l2t0_req[7] ^ `TOP.cpu.sii_l2t0_req[10] ^ `TOP.cpu.sii_l2t0_req[11] ^ `TOP.cpu.sii_l2t0_req[12] ^ `TOP.cpu.sii_l2t0_req[14] ^ `TOP.cpu.sii_l2t0_req[17] ^ `TOP.cpu.sii_l2t0_req[18] ^ `TOP.cpu.sii_l2t0_req[21] ^ `TOP.cpu.sii_l2t0_req[23] ^ `TOP.cpu.sii_l2t0_req[24] ^ `TOP.cpu.sii_l2t0_req[26] ^ `TOP.cpu.sii_l2t0_req[27] ^ `TOP.cpu.sii_l2t0_req[29] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t0_req_vld,15))) && ($0in_delay(sii_l2t0_req[24] == 0,15)) && ($0in_delay(sii_l2t0_req[25] == 0,15)) && ($0in_delay(sii_l2t0_req[26] == 1,15)) && ($0in_rising_edge($0in_delay(l2t0_sii_iq_dequeue,15))) && !(sii_wri_ecc6_l0_cycle14 == sii_l2b0_ecc[6]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc6_l0_wri_cycle14
*/

wire sii_wri_ecc0_l0_cycle15 =  (`TOP.cpu.sii_l2t0_req[0] ^ `TOP.cpu.sii_l2t0_req[1] ^ `TOP.cpu.sii_l2t0_req[3] ^ `TOP.cpu.sii_l2t0_req[4] ^ `TOP.cpu.sii_l2t0_req[6] ^ `TOP.cpu.sii_l2t0_req[8] ^ `TOP.cpu.sii_l2t0_req[10] ^ `TOP.cpu.sii_l2t0_req[11] ^ `TOP.cpu.sii_l2t0_req[13] ^ `TOP.cpu.sii_l2t0_req[15] ^ `TOP.cpu.sii_l2t0_req[17] ^ `TOP.cpu.sii_l2t0_req[19] ^ `TOP.cpu.sii_l2t0_req[21] ^ `TOP.cpu.sii_l2t0_req[23] ^ `TOP.cpu.sii_l2t0_req[25] ^ `TOP.cpu.sii_l2t0_req[26] ^ `TOP.cpu.sii_l2t0_req[28] ^ `TOP.cpu.sii_l2t0_req[30] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t0_req_vld,16))) && ($0in_delay(sii_l2t0_req[24] == 0,16)) && ($0in_delay(sii_l2t0_req[25] == 0,16)) && ($0in_delay(sii_l2t0_req[26] == 1,16)) && ($0in_rising_edge($0in_delay(l2t0_sii_iq_dequeue,16))) && !(sii_wri_ecc0_l0_cycle15 == sii_l2b0_ecc[0]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc0_l0_wri_cycle15
*/

wire sii_wri_ecc1_l0_cycle15 =  (`TOP.cpu.sii_l2t0_req[0] ^ `TOP.cpu.sii_l2t0_req[2] ^ `TOP.cpu.sii_l2t0_req[3] ^ `TOP.cpu.sii_l2t0_req[5] ^ `TOP.cpu.sii_l2t0_req[6] ^ `TOP.cpu.sii_l2t0_req[9] ^ `TOP.cpu.sii_l2t0_req[10] ^ `TOP.cpu.sii_l2t0_req[12] ^ `TOP.cpu.sii_l2t0_req[13] ^ `TOP.cpu.sii_l2t0_req[16] ^ `TOP.cpu.sii_l2t0_req[17] ^ `TOP.cpu.sii_l2t0_req[20] ^ `TOP.cpu.sii_l2t0_req[21] ^ `TOP.cpu.sii_l2t0_req[24] ^ `TOP.cpu.sii_l2t0_req[25] ^ `TOP.cpu.sii_l2t0_req[27] ^ `TOP.cpu.sii_l2t0_req[28] ^ `TOP.cpu.sii_l2t0_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t0_req_vld,16))) && ($0in_delay(sii_l2t0_req[24] == 0,16)) && ($0in_delay(sii_l2t0_req[25] == 0,16)) && ($0in_delay(sii_l2t0_req[26] == 1,16)) && ($0in_rising_edge($0in_delay(l2t0_sii_iq_dequeue,16))) && !(sii_wri_ecc1_l0_cycle15 == sii_l2b0_ecc[1]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc1_l0_wri_cycle15
*/

wire sii_wri_ecc2_l0_cycle15 =  (`TOP.cpu.sii_l2t0_req[1] ^ `TOP.cpu.sii_l2t0_req[2] ^ `TOP.cpu.sii_l2t0_req[3] ^ `TOP.cpu.sii_l2t0_req[7] ^ `TOP.cpu.sii_l2t0_req[8] ^ `TOP.cpu.sii_l2t0_req[9] ^ `TOP.cpu.sii_l2t0_req[10] ^ `TOP.cpu.sii_l2t0_req[14] ^ `TOP.cpu.sii_l2t0_req[15] ^ `TOP.cpu.sii_l2t0_req[16] ^ `TOP.cpu.sii_l2t0_req[17] ^ `TOP.cpu.sii_l2t0_req[22] ^ `TOP.cpu.sii_l2t0_req[23] ^ `TOP.cpu.sii_l2t0_req[24] ^ `TOP.cpu.sii_l2t0_req[25] ^ `TOP.cpu.sii_l2t0_req[29] ^ `TOP.cpu.sii_l2t0_req[30] ^ `TOP.cpu.sii_l2t0_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t0_req_vld,16))) && ($0in_delay(sii_l2t0_req[24] == 0,16)) && ($0in_delay(sii_l2t0_req[25] == 0,16)) && ($0in_delay(sii_l2t0_req[26] == 1,16)) && ($0in_rising_edge($0in_delay(l2t0_sii_iq_dequeue,16))) && !(sii_wri_ecc2_l0_cycle15 == sii_l2b0_ecc[2]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc2_l0_wri_cycle15
*/

wire sii_wri_ecc3_l0_cycle15 =  (`TOP.cpu.sii_l2t0_req[4] ^ `TOP.cpu.sii_l2t0_req[5] ^ `TOP.cpu.sii_l2t0_req[6] ^ `TOP.cpu.sii_l2t0_req[7] ^ `TOP.cpu.sii_l2t0_req[8] ^ `TOP.cpu.sii_l2t0_req[9] ^ `TOP.cpu.sii_l2t0_req[10] ^ `TOP.cpu.sii_l2t0_req[18] ^ `TOP.cpu.sii_l2t0_req[19] ^ `TOP.cpu.sii_l2t0_req[20] ^ `TOP.cpu.sii_l2t0_req[21] ^ `TOP.cpu.sii_l2t0_req[22] ^ `TOP.cpu.sii_l2t0_req[23] ^ `TOP.cpu.sii_l2t0_req[24] ^ `TOP.cpu.sii_l2t0_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t0_req_vld,16))) && ($0in_delay(sii_l2t0_req[24] == 0,16)) && ($0in_delay(sii_l2t0_req[25] == 0,16)) && ($0in_delay(sii_l2t0_req[26] == 1,16)) && ($0in_rising_edge($0in_delay(l2t0_sii_iq_dequeue,16))) && !(sii_wri_ecc3_l0_cycle15 == sii_l2b0_ecc[3]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc3_l0_wri_cycle15
*/

wire sii_wri_ecc4_l0_cycle15 =  ( `TOP.cpu.sii_l2t0_req[11] ^ `TOP.cpu.sii_l2t0_req[12] ^ `TOP.cpu.sii_l2t0_req[13] ^ `TOP.cpu.sii_l2t0_req[14] ^ `TOP.cpu.sii_l2t0_req[15] ^ `TOP.cpu.sii_l2t0_req[16] ^ `TOP.cpu.sii_l2t0_req[17] ^ `TOP.cpu.sii_l2t0_req[18] ^ `TOP.cpu.sii_l2t0_req[19] ^ `TOP.cpu.sii_l2t0_req[20] ^ `TOP.cpu.sii_l2t0_req[21] ^ `TOP.cpu.sii_l2t0_req[22] ^ `TOP.cpu.sii_l2t0_req[23] ^ `TOP.cpu.sii_l2t0_req[24] ^ `TOP.cpu.sii_l2t0_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t0_req_vld,16))) && ($0in_delay(sii_l2t0_req[24] == 0,16)) && ($0in_delay(sii_l2t0_req[25] == 0,16)) && ($0in_delay(sii_l2t0_req[26] == 1,16)) && ($0in_rising_edge($0in_delay(l2t0_sii_iq_dequeue,16))) && !(sii_wri_ecc4_l0_cycle15 == sii_l2b0_ecc[4]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc4_l0_wri_cycle15
*/

wire sii_wri_ecc5_l0_cycle15 =  (`TOP.cpu.sii_l2t0_req[26] ^ `TOP.cpu.sii_l2t0_req[27] ^ `TOP.cpu.sii_l2t0_req[28] ^ `TOP.cpu.sii_l2t0_req[29] ^ `TOP.cpu.sii_l2t0_req[30] ^ `TOP.cpu.sii_l2t0_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t0_req_vld,16))) && ($0in_delay(sii_l2t0_req[24] == 0,16)) && ($0in_delay(sii_l2t0_req[25] == 0,16)) && ($0in_delay(sii_l2t0_req[26] == 1,16)) && ($0in_rising_edge($0in_delay(l2t0_sii_iq_dequeue,16))) && !(sii_wri_ecc5_l0_cycle15 == sii_l2b0_ecc[5]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc5_l0_wri_cycle15
*/

wire sii_wri_ecc6_l0_cycle15 =  (`TOP.cpu.sii_l2t0_req[0] ^ `TOP.cpu.sii_l2t0_req[1] ^ `TOP.cpu.sii_l2t0_req[2] ^ `TOP.cpu.sii_l2t0_req[4] ^ `TOP.cpu.sii_l2t0_req[5] ^ `TOP.cpu.sii_l2t0_req[7] ^ `TOP.cpu.sii_l2t0_req[10] ^ `TOP.cpu.sii_l2t0_req[11] ^ `TOP.cpu.sii_l2t0_req[12] ^ `TOP.cpu.sii_l2t0_req[14] ^ `TOP.cpu.sii_l2t0_req[17] ^ `TOP.cpu.sii_l2t0_req[18] ^ `TOP.cpu.sii_l2t0_req[21] ^ `TOP.cpu.sii_l2t0_req[23] ^ `TOP.cpu.sii_l2t0_req[24] ^ `TOP.cpu.sii_l2t0_req[26] ^ `TOP.cpu.sii_l2t0_req[27] ^ `TOP.cpu.sii_l2t0_req[29] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t0_req_vld,16))) && ($0in_delay(sii_l2t0_req[24] == 0,16)) && ($0in_delay(sii_l2t0_req[25] == 0,16)) && ($0in_delay(sii_l2t0_req[26] == 1,16)) && ($0in_rising_edge($0in_delay(l2t0_sii_iq_dequeue,16))) && !(sii_wri_ecc6_l0_cycle15 == sii_l2b0_ecc[6]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc6_l0_wri_cycle15
*/

wire sii_wri_ecc0_l0_cycle16 =  (`TOP.cpu.sii_l2t0_req[0] ^ `TOP.cpu.sii_l2t0_req[1] ^ `TOP.cpu.sii_l2t0_req[3] ^ `TOP.cpu.sii_l2t0_req[4] ^ `TOP.cpu.sii_l2t0_req[6] ^ `TOP.cpu.sii_l2t0_req[8] ^ `TOP.cpu.sii_l2t0_req[10] ^ `TOP.cpu.sii_l2t0_req[11] ^ `TOP.cpu.sii_l2t0_req[13] ^ `TOP.cpu.sii_l2t0_req[15] ^ `TOP.cpu.sii_l2t0_req[17] ^ `TOP.cpu.sii_l2t0_req[19] ^ `TOP.cpu.sii_l2t0_req[21] ^ `TOP.cpu.sii_l2t0_req[23] ^ `TOP.cpu.sii_l2t0_req[25] ^ `TOP.cpu.sii_l2t0_req[26] ^ `TOP.cpu.sii_l2t0_req[28] ^ `TOP.cpu.sii_l2t0_req[30] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t0_req_vld,17))) && ($0in_delay(sii_l2t0_req[24] == 0,17)) && ($0in_delay(sii_l2t0_req[25] == 0,17)) && ($0in_delay(sii_l2t0_req[26] == 1,17)) && ($0in_rising_edge($0in_delay(l2t0_sii_iq_dequeue,17))) && !(sii_wri_ecc0_l0_cycle16 == sii_l2b0_ecc[0]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc0_l0_wri_cycle16
*/

wire sii_wri_ecc1_l0_cycle16 =  (`TOP.cpu.sii_l2t0_req[0] ^ `TOP.cpu.sii_l2t0_req[2] ^ `TOP.cpu.sii_l2t0_req[3] ^ `TOP.cpu.sii_l2t0_req[5] ^ `TOP.cpu.sii_l2t0_req[6] ^ `TOP.cpu.sii_l2t0_req[9] ^ `TOP.cpu.sii_l2t0_req[10] ^ `TOP.cpu.sii_l2t0_req[12] ^ `TOP.cpu.sii_l2t0_req[13] ^ `TOP.cpu.sii_l2t0_req[16] ^ `TOP.cpu.sii_l2t0_req[17] ^ `TOP.cpu.sii_l2t0_req[20] ^ `TOP.cpu.sii_l2t0_req[21] ^ `TOP.cpu.sii_l2t0_req[24] ^ `TOP.cpu.sii_l2t0_req[25] ^ `TOP.cpu.sii_l2t0_req[27] ^ `TOP.cpu.sii_l2t0_req[28] ^ `TOP.cpu.sii_l2t0_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t0_req_vld,17))) && ($0in_delay(sii_l2t0_req[24] == 0,17)) && ($0in_delay(sii_l2t0_req[25] == 0,17)) && ($0in_delay(sii_l2t0_req[26] == 1,17)) && ($0in_rising_edge($0in_delay(l2t0_sii_iq_dequeue,17))) && !(sii_wri_ecc1_l0_cycle16 == sii_l2b0_ecc[1]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc1_l0_wri_cycle16
*/

wire sii_wri_ecc2_l0_cycle16 =  (`TOP.cpu.sii_l2t0_req[1] ^ `TOP.cpu.sii_l2t0_req[2] ^ `TOP.cpu.sii_l2t0_req[3] ^ `TOP.cpu.sii_l2t0_req[7] ^ `TOP.cpu.sii_l2t0_req[8] ^ `TOP.cpu.sii_l2t0_req[9] ^ `TOP.cpu.sii_l2t0_req[10] ^ `TOP.cpu.sii_l2t0_req[14] ^ `TOP.cpu.sii_l2t0_req[15] ^ `TOP.cpu.sii_l2t0_req[16] ^ `TOP.cpu.sii_l2t0_req[17] ^ `TOP.cpu.sii_l2t0_req[22] ^ `TOP.cpu.sii_l2t0_req[23] ^ `TOP.cpu.sii_l2t0_req[24] ^ `TOP.cpu.sii_l2t0_req[25] ^ `TOP.cpu.sii_l2t0_req[29] ^ `TOP.cpu.sii_l2t0_req[30] ^ `TOP.cpu.sii_l2t0_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t0_req_vld,17))) && ($0in_delay(sii_l2t0_req[24] == 0,17)) && ($0in_delay(sii_l2t0_req[25] == 0,17)) && ($0in_delay(sii_l2t0_req[26] == 1,17)) && ($0in_rising_edge($0in_delay(l2t0_sii_iq_dequeue,17))) && !(sii_wri_ecc2_l0_cycle16 == sii_l2b0_ecc[2]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc2_l0_wri_cycle16
*/

wire sii_wri_ecc3_l0_cycle16 =  (`TOP.cpu.sii_l2t0_req[4] ^ `TOP.cpu.sii_l2t0_req[5] ^ `TOP.cpu.sii_l2t0_req[6] ^ `TOP.cpu.sii_l2t0_req[7] ^ `TOP.cpu.sii_l2t0_req[8] ^ `TOP.cpu.sii_l2t0_req[9] ^ `TOP.cpu.sii_l2t0_req[10] ^ `TOP.cpu.sii_l2t0_req[18] ^ `TOP.cpu.sii_l2t0_req[19] ^ `TOP.cpu.sii_l2t0_req[20] ^ `TOP.cpu.sii_l2t0_req[21] ^ `TOP.cpu.sii_l2t0_req[22] ^ `TOP.cpu.sii_l2t0_req[23] ^ `TOP.cpu.sii_l2t0_req[24] ^ `TOP.cpu.sii_l2t0_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t0_req_vld,17))) && ($0in_delay(sii_l2t0_req[24] == 0,17)) && ($0in_delay(sii_l2t0_req[25] == 0,17)) && ($0in_delay(sii_l2t0_req[26] == 1,17)) && ($0in_rising_edge($0in_delay(l2t0_sii_iq_dequeue,17))) && !(sii_wri_ecc3_l0_cycle16 == sii_l2b0_ecc[3]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc3_l0_wri_cycle16
*/

wire sii_wri_ecc4_l0_cycle16 =  ( `TOP.cpu.sii_l2t0_req[11] ^ `TOP.cpu.sii_l2t0_req[12] ^ `TOP.cpu.sii_l2t0_req[13] ^ `TOP.cpu.sii_l2t0_req[14] ^ `TOP.cpu.sii_l2t0_req[15] ^ `TOP.cpu.sii_l2t0_req[16] ^ `TOP.cpu.sii_l2t0_req[17] ^ `TOP.cpu.sii_l2t0_req[18] ^ `TOP.cpu.sii_l2t0_req[19] ^ `TOP.cpu.sii_l2t0_req[20] ^ `TOP.cpu.sii_l2t0_req[21] ^ `TOP.cpu.sii_l2t0_req[22] ^ `TOP.cpu.sii_l2t0_req[23] ^ `TOP.cpu.sii_l2t0_req[24] ^ `TOP.cpu.sii_l2t0_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t0_req_vld,17))) && ($0in_delay(sii_l2t0_req[24] == 0,17)) && ($0in_delay(sii_l2t0_req[25] == 0,17)) && ($0in_delay(sii_l2t0_req[26] == 1,17)) && ($0in_rising_edge($0in_delay(l2t0_sii_iq_dequeue,17))) && !(sii_wri_ecc4_l0_cycle16 == sii_l2b0_ecc[4]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc4_l0_wri_cycle16
*/

wire sii_wri_ecc5_l0_cycle16 =  (`TOP.cpu.sii_l2t0_req[26] ^ `TOP.cpu.sii_l2t0_req[27] ^ `TOP.cpu.sii_l2t0_req[28] ^ `TOP.cpu.sii_l2t0_req[29] ^ `TOP.cpu.sii_l2t0_req[30] ^ `TOP.cpu.sii_l2t0_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t0_req_vld,17))) && ($0in_delay(sii_l2t0_req[24] == 0,17)) && ($0in_delay(sii_l2t0_req[25] == 0,17)) && ($0in_delay(sii_l2t0_req[26] == 1,17)) && ($0in_rising_edge($0in_delay(l2t0_sii_iq_dequeue,17))) && !(sii_wri_ecc5_l0_cycle16 == sii_l2b0_ecc[5]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc5_l0_wri_cycle16
*/

wire sii_wri_ecc6_l0_cycle16 =  (`TOP.cpu.sii_l2t0_req[0] ^ `TOP.cpu.sii_l2t0_req[1] ^ `TOP.cpu.sii_l2t0_req[2] ^ `TOP.cpu.sii_l2t0_req[4] ^ `TOP.cpu.sii_l2t0_req[5] ^ `TOP.cpu.sii_l2t0_req[7] ^ `TOP.cpu.sii_l2t0_req[10] ^ `TOP.cpu.sii_l2t0_req[11] ^ `TOP.cpu.sii_l2t0_req[12] ^ `TOP.cpu.sii_l2t0_req[14] ^ `TOP.cpu.sii_l2t0_req[17] ^ `TOP.cpu.sii_l2t0_req[18] ^ `TOP.cpu.sii_l2t0_req[21] ^ `TOP.cpu.sii_l2t0_req[23] ^ `TOP.cpu.sii_l2t0_req[24] ^ `TOP.cpu.sii_l2t0_req[26] ^ `TOP.cpu.sii_l2t0_req[27] ^ `TOP.cpu.sii_l2t0_req[29] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t0_req_vld,17))) && ($0in_delay(sii_l2t0_req[24] == 0,17)) && ($0in_delay(sii_l2t0_req[25] == 0,17)) && ($0in_delay(sii_l2t0_req[26] == 1,17)) && ($0in_rising_edge($0in_delay(l2t0_sii_iq_dequeue,17))) && !(sii_wri_ecc6_l0_cycle16 == sii_l2b0_ecc[6]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc6_l0_wri_cycle16
*/

wire sii_wri_ecc0_l1_cycle1 =  (`TOP.cpu.sii_l2t1_req[0] ^ `TOP.cpu.sii_l2t1_req[1] ^ `TOP.cpu.sii_l2t1_req[3] ^ `TOP.cpu.sii_l2t1_req[4] ^ `TOP.cpu.sii_l2t1_req[6] ^ `TOP.cpu.sii_l2t1_req[8] ^ `TOP.cpu.sii_l2t1_req[10] ^ `TOP.cpu.sii_l2t1_req[11] ^ `TOP.cpu.sii_l2t1_req[13] ^ `TOP.cpu.sii_l2t1_req[15] ^ `TOP.cpu.sii_l2t1_req[17] ^ `TOP.cpu.sii_l2t1_req[19] ^ `TOP.cpu.sii_l2t1_req[21] ^ `TOP.cpu.sii_l2t1_req[23] ^ `TOP.cpu.sii_l2t1_req[25] ^ `TOP.cpu.sii_l2t1_req[26] ^ `TOP.cpu.sii_l2t1_req[28] ^ `TOP.cpu.sii_l2t1_req[30] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t1_req_vld,2))) && ($0in_delay(sii_l2t1_req[24] == 0,2)) && ($0in_delay(sii_l2t1_req[25] == 0,2)) && ($0in_delay(sii_l2t1_req[26] == 1,2)) && ($0in_rising_edge($0in_delay(l2t1_sii_iq_dequeue,2))) && !(sii_wri_ecc0_l1_cycle1 == sii_l2b1_ecc[0]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc0_l1_wri_cycle1
*/

wire sii_wri_ecc1_l1_cycle1 =  (`TOP.cpu.sii_l2t1_req[0] ^ `TOP.cpu.sii_l2t1_req[2] ^ `TOP.cpu.sii_l2t1_req[3] ^ `TOP.cpu.sii_l2t1_req[5] ^ `TOP.cpu.sii_l2t1_req[6] ^ `TOP.cpu.sii_l2t1_req[9] ^ `TOP.cpu.sii_l2t1_req[10] ^ `TOP.cpu.sii_l2t1_req[12] ^ `TOP.cpu.sii_l2t1_req[13] ^ `TOP.cpu.sii_l2t1_req[16] ^ `TOP.cpu.sii_l2t1_req[17] ^ `TOP.cpu.sii_l2t1_req[20] ^ `TOP.cpu.sii_l2t1_req[21] ^ `TOP.cpu.sii_l2t1_req[24] ^ `TOP.cpu.sii_l2t1_req[25] ^ `TOP.cpu.sii_l2t1_req[27] ^ `TOP.cpu.sii_l2t1_req[28] ^ `TOP.cpu.sii_l2t1_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t1_req_vld,2))) && ($0in_delay(sii_l2t1_req[24] == 0,2)) && ($0in_delay(sii_l2t1_req[25] == 0,2)) && ($0in_delay(sii_l2t1_req[26] == 1,2)) && ($0in_rising_edge($0in_delay(l2t1_sii_iq_dequeue,2))) && !(sii_wri_ecc1_l1_cycle1 == sii_l2b1_ecc[1]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc1_l1_wri_cycle1
*/

wire sii_wri_ecc2_l1_cycle1 =  (`TOP.cpu.sii_l2t1_req[1] ^ `TOP.cpu.sii_l2t1_req[2] ^ `TOP.cpu.sii_l2t1_req[3] ^ `TOP.cpu.sii_l2t1_req[7] ^ `TOP.cpu.sii_l2t1_req[8] ^ `TOP.cpu.sii_l2t1_req[9] ^ `TOP.cpu.sii_l2t1_req[10] ^ `TOP.cpu.sii_l2t1_req[14] ^ `TOP.cpu.sii_l2t1_req[15] ^ `TOP.cpu.sii_l2t1_req[16] ^ `TOP.cpu.sii_l2t1_req[17] ^ `TOP.cpu.sii_l2t1_req[22] ^ `TOP.cpu.sii_l2t1_req[23] ^ `TOP.cpu.sii_l2t1_req[24] ^ `TOP.cpu.sii_l2t1_req[25] ^ `TOP.cpu.sii_l2t1_req[29] ^ `TOP.cpu.sii_l2t1_req[30] ^ `TOP.cpu.sii_l2t1_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t1_req_vld,2))) && ($0in_delay(sii_l2t1_req[24] == 0,2)) && ($0in_delay(sii_l2t1_req[25] == 0,2)) && ($0in_delay(sii_l2t1_req[26] == 1,2)) && ($0in_rising_edge($0in_delay(l2t1_sii_iq_dequeue,2))) && !(sii_wri_ecc2_l1_cycle1 == sii_l2b1_ecc[2]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc2_l1_wri_cycle1
*/

wire sii_wri_ecc3_l1_cycle1 =  (`TOP.cpu.sii_l2t1_req[4] ^ `TOP.cpu.sii_l2t1_req[5] ^ `TOP.cpu.sii_l2t1_req[6] ^ `TOP.cpu.sii_l2t1_req[7] ^ `TOP.cpu.sii_l2t1_req[8] ^ `TOP.cpu.sii_l2t1_req[9] ^ `TOP.cpu.sii_l2t1_req[10] ^ `TOP.cpu.sii_l2t1_req[18] ^ `TOP.cpu.sii_l2t1_req[19] ^ `TOP.cpu.sii_l2t1_req[20] ^ `TOP.cpu.sii_l2t1_req[21] ^ `TOP.cpu.sii_l2t1_req[22] ^ `TOP.cpu.sii_l2t1_req[23] ^ `TOP.cpu.sii_l2t1_req[24] ^ `TOP.cpu.sii_l2t1_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t1_req_vld,2))) && ($0in_delay(sii_l2t1_req[24] == 0,2)) && ($0in_delay(sii_l2t1_req[25] == 0,2)) && ($0in_delay(sii_l2t1_req[26] == 1,2)) && ($0in_rising_edge($0in_delay(l2t1_sii_iq_dequeue,2))) && !(sii_wri_ecc3_l1_cycle1 == sii_l2b1_ecc[3]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc3_l1_wri_cycle1
*/

wire sii_wri_ecc4_l1_cycle1 =  ( `TOP.cpu.sii_l2t1_req[11] ^ `TOP.cpu.sii_l2t1_req[12] ^ `TOP.cpu.sii_l2t1_req[13] ^ `TOP.cpu.sii_l2t1_req[14] ^ `TOP.cpu.sii_l2t1_req[15] ^ `TOP.cpu.sii_l2t1_req[16] ^ `TOP.cpu.sii_l2t1_req[17] ^ `TOP.cpu.sii_l2t1_req[18] ^ `TOP.cpu.sii_l2t1_req[19] ^ `TOP.cpu.sii_l2t1_req[20] ^ `TOP.cpu.sii_l2t1_req[21] ^ `TOP.cpu.sii_l2t1_req[22] ^ `TOP.cpu.sii_l2t1_req[23] ^ `TOP.cpu.sii_l2t1_req[24] ^ `TOP.cpu.sii_l2t1_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t1_req_vld,2))) && ($0in_delay(sii_l2t1_req[24] == 0,2)) && ($0in_delay(sii_l2t1_req[25] == 0,2)) && ($0in_delay(sii_l2t1_req[26] == 1,2)) && ($0in_rising_edge($0in_delay(l2t1_sii_iq_dequeue,2))) && !(sii_wri_ecc4_l1_cycle1 == sii_l2b1_ecc[4]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc4_l1_wri_cycle1
*/

wire sii_wri_ecc5_l1_cycle1 =  (`TOP.cpu.sii_l2t1_req[26] ^ `TOP.cpu.sii_l2t1_req[27] ^ `TOP.cpu.sii_l2t1_req[28] ^ `TOP.cpu.sii_l2t1_req[29] ^ `TOP.cpu.sii_l2t1_req[30] ^ `TOP.cpu.sii_l2t1_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t1_req_vld,2))) && ($0in_delay(sii_l2t1_req[24] == 0,2)) && ($0in_delay(sii_l2t1_req[25] == 0,2)) && ($0in_delay(sii_l2t1_req[26] == 1,2)) && ($0in_rising_edge($0in_delay(l2t1_sii_iq_dequeue,2))) && !(sii_wri_ecc5_l1_cycle1 == sii_l2b1_ecc[5]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc5_l1_wri_cycle1
*/

wire sii_wri_ecc6_l1_cycle1 =  (`TOP.cpu.sii_l2t1_req[0] ^ `TOP.cpu.sii_l2t1_req[1] ^ `TOP.cpu.sii_l2t1_req[2] ^ `TOP.cpu.sii_l2t1_req[4] ^ `TOP.cpu.sii_l2t1_req[5] ^ `TOP.cpu.sii_l2t1_req[7] ^ `TOP.cpu.sii_l2t1_req[10] ^ `TOP.cpu.sii_l2t1_req[11] ^ `TOP.cpu.sii_l2t1_req[12] ^ `TOP.cpu.sii_l2t1_req[14] ^ `TOP.cpu.sii_l2t1_req[17] ^ `TOP.cpu.sii_l2t1_req[18] ^ `TOP.cpu.sii_l2t1_req[21] ^ `TOP.cpu.sii_l2t1_req[23] ^ `TOP.cpu.sii_l2t1_req[24] ^ `TOP.cpu.sii_l2t1_req[26] ^ `TOP.cpu.sii_l2t1_req[27] ^ `TOP.cpu.sii_l2t1_req[29] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t1_req_vld,2))) && ($0in_delay(sii_l2t1_req[24] == 0,2)) && ($0in_delay(sii_l2t1_req[25] == 0,2)) && ($0in_delay(sii_l2t1_req[26] == 1,2)) && ($0in_rising_edge($0in_delay(l2t1_sii_iq_dequeue,2))) && !(sii_wri_ecc6_l1_cycle1 == sii_l2b1_ecc[6]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc6_l1_wri_cycle1
*/

wire sii_wri_ecc0_l1_cycle2 =  (`TOP.cpu.sii_l2t1_req[0] ^ `TOP.cpu.sii_l2t1_req[1] ^ `TOP.cpu.sii_l2t1_req[3] ^ `TOP.cpu.sii_l2t1_req[4] ^ `TOP.cpu.sii_l2t1_req[6] ^ `TOP.cpu.sii_l2t1_req[8] ^ `TOP.cpu.sii_l2t1_req[10] ^ `TOP.cpu.sii_l2t1_req[11] ^ `TOP.cpu.sii_l2t1_req[13] ^ `TOP.cpu.sii_l2t1_req[15] ^ `TOP.cpu.sii_l2t1_req[17] ^ `TOP.cpu.sii_l2t1_req[19] ^ `TOP.cpu.sii_l2t1_req[21] ^ `TOP.cpu.sii_l2t1_req[23] ^ `TOP.cpu.sii_l2t1_req[25] ^ `TOP.cpu.sii_l2t1_req[26] ^ `TOP.cpu.sii_l2t1_req[28] ^ `TOP.cpu.sii_l2t1_req[30] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t1_req_vld,3))) && ($0in_delay(sii_l2t1_req[24] == 0,3)) && ($0in_delay(sii_l2t1_req[25] == 0,3)) && ($0in_delay(sii_l2t1_req[26] == 1,3)) && ($0in_rising_edge($0in_delay(l2t1_sii_iq_dequeue,3))) && !(sii_wri_ecc0_l1_cycle2 == sii_l2b1_ecc[0]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc0_l1_wri_cycle2
*/

wire sii_wri_ecc1_l1_cycle2 =  (`TOP.cpu.sii_l2t1_req[0] ^ `TOP.cpu.sii_l2t1_req[2] ^ `TOP.cpu.sii_l2t1_req[3] ^ `TOP.cpu.sii_l2t1_req[5] ^ `TOP.cpu.sii_l2t1_req[6] ^ `TOP.cpu.sii_l2t1_req[9] ^ `TOP.cpu.sii_l2t1_req[10] ^ `TOP.cpu.sii_l2t1_req[12] ^ `TOP.cpu.sii_l2t1_req[13] ^ `TOP.cpu.sii_l2t1_req[16] ^ `TOP.cpu.sii_l2t1_req[17] ^ `TOP.cpu.sii_l2t1_req[20] ^ `TOP.cpu.sii_l2t1_req[21] ^ `TOP.cpu.sii_l2t1_req[24] ^ `TOP.cpu.sii_l2t1_req[25] ^ `TOP.cpu.sii_l2t1_req[27] ^ `TOP.cpu.sii_l2t1_req[28] ^ `TOP.cpu.sii_l2t1_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t1_req_vld,3))) && ($0in_delay(sii_l2t1_req[24] == 0,3)) && ($0in_delay(sii_l2t1_req[25] == 0,3)) && ($0in_delay(sii_l2t1_req[26] == 1,3)) && ($0in_rising_edge($0in_delay(l2t1_sii_iq_dequeue,3))) && !(sii_wri_ecc1_l1_cycle2 == sii_l2b1_ecc[1]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc1_l1_wri_cycle2
*/

wire sii_wri_ecc2_l1_cycle2 =  (`TOP.cpu.sii_l2t1_req[1] ^ `TOP.cpu.sii_l2t1_req[2] ^ `TOP.cpu.sii_l2t1_req[3] ^ `TOP.cpu.sii_l2t1_req[7] ^ `TOP.cpu.sii_l2t1_req[8] ^ `TOP.cpu.sii_l2t1_req[9] ^ `TOP.cpu.sii_l2t1_req[10] ^ `TOP.cpu.sii_l2t1_req[14] ^ `TOP.cpu.sii_l2t1_req[15] ^ `TOP.cpu.sii_l2t1_req[16] ^ `TOP.cpu.sii_l2t1_req[17] ^ `TOP.cpu.sii_l2t1_req[22] ^ `TOP.cpu.sii_l2t1_req[23] ^ `TOP.cpu.sii_l2t1_req[24] ^ `TOP.cpu.sii_l2t1_req[25] ^ `TOP.cpu.sii_l2t1_req[29] ^ `TOP.cpu.sii_l2t1_req[30] ^ `TOP.cpu.sii_l2t1_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t1_req_vld,3))) && ($0in_delay(sii_l2t1_req[24] == 0,3)) && ($0in_delay(sii_l2t1_req[25] == 0,3)) && ($0in_delay(sii_l2t1_req[26] == 1,3)) && ($0in_rising_edge($0in_delay(l2t1_sii_iq_dequeue,3))) && !(sii_wri_ecc2_l1_cycle2 == sii_l2b1_ecc[2]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc2_l1_wri_cycle2
*/

wire sii_wri_ecc3_l1_cycle2 =  (`TOP.cpu.sii_l2t1_req[4] ^ `TOP.cpu.sii_l2t1_req[5] ^ `TOP.cpu.sii_l2t1_req[6] ^ `TOP.cpu.sii_l2t1_req[7] ^ `TOP.cpu.sii_l2t1_req[8] ^ `TOP.cpu.sii_l2t1_req[9] ^ `TOP.cpu.sii_l2t1_req[10] ^ `TOP.cpu.sii_l2t1_req[18] ^ `TOP.cpu.sii_l2t1_req[19] ^ `TOP.cpu.sii_l2t1_req[20] ^ `TOP.cpu.sii_l2t1_req[21] ^ `TOP.cpu.sii_l2t1_req[22] ^ `TOP.cpu.sii_l2t1_req[23] ^ `TOP.cpu.sii_l2t1_req[24] ^ `TOP.cpu.sii_l2t1_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t1_req_vld,3))) && ($0in_delay(sii_l2t1_req[24] == 0,3)) && ($0in_delay(sii_l2t1_req[25] == 0,3)) && ($0in_delay(sii_l2t1_req[26] == 1,3)) && ($0in_rising_edge($0in_delay(l2t1_sii_iq_dequeue,3))) && !(sii_wri_ecc3_l1_cycle2 == sii_l2b1_ecc[3]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc3_l1_wri_cycle2
*/

wire sii_wri_ecc4_l1_cycle2 =  ( `TOP.cpu.sii_l2t1_req[11] ^ `TOP.cpu.sii_l2t1_req[12] ^ `TOP.cpu.sii_l2t1_req[13] ^ `TOP.cpu.sii_l2t1_req[14] ^ `TOP.cpu.sii_l2t1_req[15] ^ `TOP.cpu.sii_l2t1_req[16] ^ `TOP.cpu.sii_l2t1_req[17] ^ `TOP.cpu.sii_l2t1_req[18] ^ `TOP.cpu.sii_l2t1_req[19] ^ `TOP.cpu.sii_l2t1_req[20] ^ `TOP.cpu.sii_l2t1_req[21] ^ `TOP.cpu.sii_l2t1_req[22] ^ `TOP.cpu.sii_l2t1_req[23] ^ `TOP.cpu.sii_l2t1_req[24] ^ `TOP.cpu.sii_l2t1_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t1_req_vld,3))) && ($0in_delay(sii_l2t1_req[24] == 0,3)) && ($0in_delay(sii_l2t1_req[25] == 0,3)) && ($0in_delay(sii_l2t1_req[26] == 1,3)) && ($0in_rising_edge($0in_delay(l2t1_sii_iq_dequeue,3))) && !(sii_wri_ecc4_l1_cycle2 == sii_l2b1_ecc[4]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc4_l1_wri_cycle2
*/

wire sii_wri_ecc5_l1_cycle2 =  (`TOP.cpu.sii_l2t1_req[26] ^ `TOP.cpu.sii_l2t1_req[27] ^ `TOP.cpu.sii_l2t1_req[28] ^ `TOP.cpu.sii_l2t1_req[29] ^ `TOP.cpu.sii_l2t1_req[30] ^ `TOP.cpu.sii_l2t1_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t1_req_vld,3))) && ($0in_delay(sii_l2t1_req[24] == 0,3)) && ($0in_delay(sii_l2t1_req[25] == 0,3)) && ($0in_delay(sii_l2t1_req[26] == 1,3)) && ($0in_rising_edge($0in_delay(l2t1_sii_iq_dequeue,3))) && !(sii_wri_ecc5_l1_cycle2 == sii_l2b1_ecc[5]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc5_l1_wri_cycle2
*/

wire sii_wri_ecc6_l1_cycle2 =  (`TOP.cpu.sii_l2t1_req[0] ^ `TOP.cpu.sii_l2t1_req[1] ^ `TOP.cpu.sii_l2t1_req[2] ^ `TOP.cpu.sii_l2t1_req[4] ^ `TOP.cpu.sii_l2t1_req[5] ^ `TOP.cpu.sii_l2t1_req[7] ^ `TOP.cpu.sii_l2t1_req[10] ^ `TOP.cpu.sii_l2t1_req[11] ^ `TOP.cpu.sii_l2t1_req[12] ^ `TOP.cpu.sii_l2t1_req[14] ^ `TOP.cpu.sii_l2t1_req[17] ^ `TOP.cpu.sii_l2t1_req[18] ^ `TOP.cpu.sii_l2t1_req[21] ^ `TOP.cpu.sii_l2t1_req[23] ^ `TOP.cpu.sii_l2t1_req[24] ^ `TOP.cpu.sii_l2t1_req[26] ^ `TOP.cpu.sii_l2t1_req[27] ^ `TOP.cpu.sii_l2t1_req[29] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t1_req_vld,3))) && ($0in_delay(sii_l2t1_req[24] == 0,3)) && ($0in_delay(sii_l2t1_req[25] == 0,3)) && ($0in_delay(sii_l2t1_req[26] == 1,3)) && ($0in_rising_edge($0in_delay(l2t1_sii_iq_dequeue,3))) && !(sii_wri_ecc6_l1_cycle2 == sii_l2b1_ecc[6]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc6_l1_wri_cycle2
*/

wire sii_wri_ecc0_l1_cycle3 =  (`TOP.cpu.sii_l2t1_req[0] ^ `TOP.cpu.sii_l2t1_req[1] ^ `TOP.cpu.sii_l2t1_req[3] ^ `TOP.cpu.sii_l2t1_req[4] ^ `TOP.cpu.sii_l2t1_req[6] ^ `TOP.cpu.sii_l2t1_req[8] ^ `TOP.cpu.sii_l2t1_req[10] ^ `TOP.cpu.sii_l2t1_req[11] ^ `TOP.cpu.sii_l2t1_req[13] ^ `TOP.cpu.sii_l2t1_req[15] ^ `TOP.cpu.sii_l2t1_req[17] ^ `TOP.cpu.sii_l2t1_req[19] ^ `TOP.cpu.sii_l2t1_req[21] ^ `TOP.cpu.sii_l2t1_req[23] ^ `TOP.cpu.sii_l2t1_req[25] ^ `TOP.cpu.sii_l2t1_req[26] ^ `TOP.cpu.sii_l2t1_req[28] ^ `TOP.cpu.sii_l2t1_req[30] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t1_req_vld,4))) && ($0in_delay(sii_l2t1_req[24] == 0,4)) && ($0in_delay(sii_l2t1_req[25] == 0,4)) && ($0in_delay(sii_l2t1_req[26] == 1,4)) && ($0in_rising_edge($0in_delay(l2t1_sii_iq_dequeue,4))) && !(sii_wri_ecc0_l1_cycle3 == sii_l2b1_ecc[0]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc0_l1_wri_cycle3
*/

wire sii_wri_ecc1_l1_cycle3 =  (`TOP.cpu.sii_l2t1_req[0] ^ `TOP.cpu.sii_l2t1_req[2] ^ `TOP.cpu.sii_l2t1_req[3] ^ `TOP.cpu.sii_l2t1_req[5] ^ `TOP.cpu.sii_l2t1_req[6] ^ `TOP.cpu.sii_l2t1_req[9] ^ `TOP.cpu.sii_l2t1_req[10] ^ `TOP.cpu.sii_l2t1_req[12] ^ `TOP.cpu.sii_l2t1_req[13] ^ `TOP.cpu.sii_l2t1_req[16] ^ `TOP.cpu.sii_l2t1_req[17] ^ `TOP.cpu.sii_l2t1_req[20] ^ `TOP.cpu.sii_l2t1_req[21] ^ `TOP.cpu.sii_l2t1_req[24] ^ `TOP.cpu.sii_l2t1_req[25] ^ `TOP.cpu.sii_l2t1_req[27] ^ `TOP.cpu.sii_l2t1_req[28] ^ `TOP.cpu.sii_l2t1_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t1_req_vld,4))) && ($0in_delay(sii_l2t1_req[24] == 0,4)) && ($0in_delay(sii_l2t1_req[25] == 0,4)) && ($0in_delay(sii_l2t1_req[26] == 1,4)) && ($0in_rising_edge($0in_delay(l2t1_sii_iq_dequeue,4))) && !(sii_wri_ecc1_l1_cycle3 == sii_l2b1_ecc[1]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc1_l1_wri_cycle3
*/

wire sii_wri_ecc2_l1_cycle3 =  (`TOP.cpu.sii_l2t1_req[1] ^ `TOP.cpu.sii_l2t1_req[2] ^ `TOP.cpu.sii_l2t1_req[3] ^ `TOP.cpu.sii_l2t1_req[7] ^ `TOP.cpu.sii_l2t1_req[8] ^ `TOP.cpu.sii_l2t1_req[9] ^ `TOP.cpu.sii_l2t1_req[10] ^ `TOP.cpu.sii_l2t1_req[14] ^ `TOP.cpu.sii_l2t1_req[15] ^ `TOP.cpu.sii_l2t1_req[16] ^ `TOP.cpu.sii_l2t1_req[17] ^ `TOP.cpu.sii_l2t1_req[22] ^ `TOP.cpu.sii_l2t1_req[23] ^ `TOP.cpu.sii_l2t1_req[24] ^ `TOP.cpu.sii_l2t1_req[25] ^ `TOP.cpu.sii_l2t1_req[29] ^ `TOP.cpu.sii_l2t1_req[30] ^ `TOP.cpu.sii_l2t1_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t1_req_vld,4))) && ($0in_delay(sii_l2t1_req[24] == 0,4)) && ($0in_delay(sii_l2t1_req[25] == 0,4)) && ($0in_delay(sii_l2t1_req[26] == 1,4)) && ($0in_rising_edge($0in_delay(l2t1_sii_iq_dequeue,4))) && !(sii_wri_ecc2_l1_cycle3 == sii_l2b1_ecc[2]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc2_l1_wri_cycle3
*/

wire sii_wri_ecc3_l1_cycle3 =  (`TOP.cpu.sii_l2t1_req[4] ^ `TOP.cpu.sii_l2t1_req[5] ^ `TOP.cpu.sii_l2t1_req[6] ^ `TOP.cpu.sii_l2t1_req[7] ^ `TOP.cpu.sii_l2t1_req[8] ^ `TOP.cpu.sii_l2t1_req[9] ^ `TOP.cpu.sii_l2t1_req[10] ^ `TOP.cpu.sii_l2t1_req[18] ^ `TOP.cpu.sii_l2t1_req[19] ^ `TOP.cpu.sii_l2t1_req[20] ^ `TOP.cpu.sii_l2t1_req[21] ^ `TOP.cpu.sii_l2t1_req[22] ^ `TOP.cpu.sii_l2t1_req[23] ^ `TOP.cpu.sii_l2t1_req[24] ^ `TOP.cpu.sii_l2t1_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t1_req_vld,4))) && ($0in_delay(sii_l2t1_req[24] == 0,4)) && ($0in_delay(sii_l2t1_req[25] == 0,4)) && ($0in_delay(sii_l2t1_req[26] == 1,4)) && ($0in_rising_edge($0in_delay(l2t1_sii_iq_dequeue,4))) && !(sii_wri_ecc3_l1_cycle3 == sii_l2b1_ecc[3]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc3_l1_wri_cycle3
*/

wire sii_wri_ecc4_l1_cycle3 =  ( `TOP.cpu.sii_l2t1_req[11] ^ `TOP.cpu.sii_l2t1_req[12] ^ `TOP.cpu.sii_l2t1_req[13] ^ `TOP.cpu.sii_l2t1_req[14] ^ `TOP.cpu.sii_l2t1_req[15] ^ `TOP.cpu.sii_l2t1_req[16] ^ `TOP.cpu.sii_l2t1_req[17] ^ `TOP.cpu.sii_l2t1_req[18] ^ `TOP.cpu.sii_l2t1_req[19] ^ `TOP.cpu.sii_l2t1_req[20] ^ `TOP.cpu.sii_l2t1_req[21] ^ `TOP.cpu.sii_l2t1_req[22] ^ `TOP.cpu.sii_l2t1_req[23] ^ `TOP.cpu.sii_l2t1_req[24] ^ `TOP.cpu.sii_l2t1_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t1_req_vld,4))) && ($0in_delay(sii_l2t1_req[24] == 0,4)) && ($0in_delay(sii_l2t1_req[25] == 0,4)) && ($0in_delay(sii_l2t1_req[26] == 1,4)) && ($0in_rising_edge($0in_delay(l2t1_sii_iq_dequeue,4))) && !(sii_wri_ecc4_l1_cycle3 == sii_l2b1_ecc[4]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc4_l1_wri_cycle3
*/

wire sii_wri_ecc5_l1_cycle3 =  (`TOP.cpu.sii_l2t1_req[26] ^ `TOP.cpu.sii_l2t1_req[27] ^ `TOP.cpu.sii_l2t1_req[28] ^ `TOP.cpu.sii_l2t1_req[29] ^ `TOP.cpu.sii_l2t1_req[30] ^ `TOP.cpu.sii_l2t1_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t1_req_vld,4))) && ($0in_delay(sii_l2t1_req[24] == 0,4)) && ($0in_delay(sii_l2t1_req[25] == 0,4)) && ($0in_delay(sii_l2t1_req[26] == 1,4)) && ($0in_rising_edge($0in_delay(l2t1_sii_iq_dequeue,4))) && !(sii_wri_ecc5_l1_cycle3 == sii_l2b1_ecc[5]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc5_l1_wri_cycle3
*/

wire sii_wri_ecc6_l1_cycle3 =  (`TOP.cpu.sii_l2t1_req[0] ^ `TOP.cpu.sii_l2t1_req[1] ^ `TOP.cpu.sii_l2t1_req[2] ^ `TOP.cpu.sii_l2t1_req[4] ^ `TOP.cpu.sii_l2t1_req[5] ^ `TOP.cpu.sii_l2t1_req[7] ^ `TOP.cpu.sii_l2t1_req[10] ^ `TOP.cpu.sii_l2t1_req[11] ^ `TOP.cpu.sii_l2t1_req[12] ^ `TOP.cpu.sii_l2t1_req[14] ^ `TOP.cpu.sii_l2t1_req[17] ^ `TOP.cpu.sii_l2t1_req[18] ^ `TOP.cpu.sii_l2t1_req[21] ^ `TOP.cpu.sii_l2t1_req[23] ^ `TOP.cpu.sii_l2t1_req[24] ^ `TOP.cpu.sii_l2t1_req[26] ^ `TOP.cpu.sii_l2t1_req[27] ^ `TOP.cpu.sii_l2t1_req[29] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t1_req_vld,4))) && ($0in_delay(sii_l2t1_req[24] == 0,4)) && ($0in_delay(sii_l2t1_req[25] == 0,2)) && ($0in_delay(sii_l2t1_req[26] == 1,4)) && ($0in_rising_edge($0in_delay(l2t1_sii_iq_dequeue,4))) && !(sii_wri_ecc6_l1_cycle3 == sii_l2b1_ecc[6]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc6_l1_wri_cycle3
*/

wire sii_wri_ecc0_l1_cycle4 =  (`TOP.cpu.sii_l2t1_req[0] ^ `TOP.cpu.sii_l2t1_req[1] ^ `TOP.cpu.sii_l2t1_req[3] ^ `TOP.cpu.sii_l2t1_req[4] ^ `TOP.cpu.sii_l2t1_req[6] ^ `TOP.cpu.sii_l2t1_req[8] ^ `TOP.cpu.sii_l2t1_req[10] ^ `TOP.cpu.sii_l2t1_req[11] ^ `TOP.cpu.sii_l2t1_req[13] ^ `TOP.cpu.sii_l2t1_req[15] ^ `TOP.cpu.sii_l2t1_req[17] ^ `TOP.cpu.sii_l2t1_req[19] ^ `TOP.cpu.sii_l2t1_req[21] ^ `TOP.cpu.sii_l2t1_req[23] ^ `TOP.cpu.sii_l2t1_req[25] ^ `TOP.cpu.sii_l2t1_req[26] ^ `TOP.cpu.sii_l2t1_req[28] ^ `TOP.cpu.sii_l2t1_req[30] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t1_req_vld,5))) && ($0in_delay(sii_l2t1_req[24] == 0,5)) && ($0in_delay(sii_l2t1_req[25] == 0,5)) && ($0in_delay(sii_l2t1_req[26] == 1,5)) && ($0in_rising_edge($0in_delay(l2t1_sii_iq_dequeue,5))) && !(sii_wri_ecc0_l1_cycle4 == sii_l2b1_ecc[0]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc0_l1_wri_cycle4
*/

wire sii_wri_ecc1_l1_cycle4 =  (`TOP.cpu.sii_l2t1_req[0] ^ `TOP.cpu.sii_l2t1_req[2] ^ `TOP.cpu.sii_l2t1_req[3] ^ `TOP.cpu.sii_l2t1_req[5] ^ `TOP.cpu.sii_l2t1_req[6] ^ `TOP.cpu.sii_l2t1_req[9] ^ `TOP.cpu.sii_l2t1_req[10] ^ `TOP.cpu.sii_l2t1_req[12] ^ `TOP.cpu.sii_l2t1_req[13] ^ `TOP.cpu.sii_l2t1_req[16] ^ `TOP.cpu.sii_l2t1_req[17] ^ `TOP.cpu.sii_l2t1_req[20] ^ `TOP.cpu.sii_l2t1_req[21] ^ `TOP.cpu.sii_l2t1_req[24] ^ `TOP.cpu.sii_l2t1_req[25] ^ `TOP.cpu.sii_l2t1_req[27] ^ `TOP.cpu.sii_l2t1_req[28] ^ `TOP.cpu.sii_l2t1_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t1_req_vld,5))) && ($0in_delay(sii_l2t1_req[24] == 0,5)) && ($0in_delay(sii_l2t1_req[25] == 0,5)) && ($0in_delay(sii_l2t1_req[26] == 1,5)) && ($0in_rising_edge($0in_delay(l2t1_sii_iq_dequeue,5))) && !(sii_wri_ecc1_l1_cycle4 == sii_l2b1_ecc[1]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc1_l1_wri_cycle4
*/

wire sii_wri_ecc2_l1_cycle4 =  (`TOP.cpu.sii_l2t1_req[1] ^ `TOP.cpu.sii_l2t1_req[2] ^ `TOP.cpu.sii_l2t1_req[3] ^ `TOP.cpu.sii_l2t1_req[7] ^ `TOP.cpu.sii_l2t1_req[8] ^ `TOP.cpu.sii_l2t1_req[9] ^ `TOP.cpu.sii_l2t1_req[10] ^ `TOP.cpu.sii_l2t1_req[14] ^ `TOP.cpu.sii_l2t1_req[15] ^ `TOP.cpu.sii_l2t1_req[16] ^ `TOP.cpu.sii_l2t1_req[17] ^ `TOP.cpu.sii_l2t1_req[22] ^ `TOP.cpu.sii_l2t1_req[23] ^ `TOP.cpu.sii_l2t1_req[24] ^ `TOP.cpu.sii_l2t1_req[25] ^ `TOP.cpu.sii_l2t1_req[29] ^ `TOP.cpu.sii_l2t1_req[30] ^ `TOP.cpu.sii_l2t1_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t1_req_vld,5))) && ($0in_delay(sii_l2t1_req[24] == 0,5)) && ($0in_delay(sii_l2t1_req[25] == 0,5)) && ($0in_delay(sii_l2t1_req[26] == 1,5)) && ($0in_rising_edge($0in_delay(l2t1_sii_iq_dequeue,5))) && !(sii_wri_ecc2_l1_cycle4 == sii_l2b1_ecc[2]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc2_l1_wri_cycle4
*/

wire sii_wri_ecc3_l1_cycle4 =  (`TOP.cpu.sii_l2t1_req[4] ^ `TOP.cpu.sii_l2t1_req[5] ^ `TOP.cpu.sii_l2t1_req[6] ^ `TOP.cpu.sii_l2t1_req[7] ^ `TOP.cpu.sii_l2t1_req[8] ^ `TOP.cpu.sii_l2t1_req[9] ^ `TOP.cpu.sii_l2t1_req[10] ^ `TOP.cpu.sii_l2t1_req[18] ^ `TOP.cpu.sii_l2t1_req[19] ^ `TOP.cpu.sii_l2t1_req[20] ^ `TOP.cpu.sii_l2t1_req[21] ^ `TOP.cpu.sii_l2t1_req[22] ^ `TOP.cpu.sii_l2t1_req[23] ^ `TOP.cpu.sii_l2t1_req[24] ^ `TOP.cpu.sii_l2t1_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t1_req_vld,5))) && ($0in_delay(sii_l2t1_req[24] == 0,5)) && ($0in_delay(sii_l2t1_req[25] == 0,5)) && ($0in_delay(sii_l2t1_req[26] == 1,5)) && ($0in_rising_edge($0in_delay(l2t1_sii_iq_dequeue,5))) && !(sii_wri_ecc3_l1_cycle4 == sii_l2b1_ecc[3]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc3_l1_wri_cycle4
*/

wire sii_wri_ecc4_l1_cycle4 =  ( `TOP.cpu.sii_l2t1_req[11] ^ `TOP.cpu.sii_l2t1_req[12] ^ `TOP.cpu.sii_l2t1_req[13] ^ `TOP.cpu.sii_l2t1_req[14] ^ `TOP.cpu.sii_l2t1_req[15] ^ `TOP.cpu.sii_l2t1_req[16] ^ `TOP.cpu.sii_l2t1_req[17] ^ `TOP.cpu.sii_l2t1_req[18] ^ `TOP.cpu.sii_l2t1_req[19] ^ `TOP.cpu.sii_l2t1_req[20] ^ `TOP.cpu.sii_l2t1_req[21] ^ `TOP.cpu.sii_l2t1_req[22] ^ `TOP.cpu.sii_l2t1_req[23] ^ `TOP.cpu.sii_l2t1_req[24] ^ `TOP.cpu.sii_l2t1_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t1_req_vld,5))) && ($0in_delay(sii_l2t1_req[24] == 0,5)) && ($0in_delay(sii_l2t1_req[25] == 0,5)) && ($0in_delay(sii_l2t1_req[26] == 1,5)) && ($0in_rising_edge($0in_delay(l2t1_sii_iq_dequeue,5))) && !(sii_wri_ecc4_l1_cycle4 == sii_l2b1_ecc[4]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc4_l1_wri_cycle4
*/

wire sii_wri_ecc5_l1_cycle4 =  (`TOP.cpu.sii_l2t1_req[26] ^ `TOP.cpu.sii_l2t1_req[27] ^ `TOP.cpu.sii_l2t1_req[28] ^ `TOP.cpu.sii_l2t1_req[29] ^ `TOP.cpu.sii_l2t1_req[30] ^ `TOP.cpu.sii_l2t1_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t1_req_vld,5))) && ($0in_delay(sii_l2t1_req[24] == 0,5)) && ($0in_delay(sii_l2t1_req[25] == 0,5)) && ($0in_delay(sii_l2t1_req[26] == 1,5)) && ($0in_rising_edge($0in_delay(l2t1_sii_iq_dequeue,5))) && !(sii_wri_ecc5_l1_cycle4 == sii_l2b1_ecc[5]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc5_l1_wri_cycle4
*/

wire sii_wri_ecc6_l1_cycle4 =  (`TOP.cpu.sii_l2t1_req[0] ^ `TOP.cpu.sii_l2t1_req[1] ^ `TOP.cpu.sii_l2t1_req[2] ^ `TOP.cpu.sii_l2t1_req[4] ^ `TOP.cpu.sii_l2t1_req[5] ^ `TOP.cpu.sii_l2t1_req[7] ^ `TOP.cpu.sii_l2t1_req[10] ^ `TOP.cpu.sii_l2t1_req[11] ^ `TOP.cpu.sii_l2t1_req[12] ^ `TOP.cpu.sii_l2t1_req[14] ^ `TOP.cpu.sii_l2t1_req[17] ^ `TOP.cpu.sii_l2t1_req[18] ^ `TOP.cpu.sii_l2t1_req[21] ^ `TOP.cpu.sii_l2t1_req[23] ^ `TOP.cpu.sii_l2t1_req[24] ^ `TOP.cpu.sii_l2t1_req[26] ^ `TOP.cpu.sii_l2t1_req[27] ^ `TOP.cpu.sii_l2t1_req[29] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t1_req_vld,5))) && ($0in_delay(sii_l2t1_req[24] == 0,5)) && ($0in_delay(sii_l2t1_req[25] == 0,5)) && ($0in_delay(sii_l2t1_req[26] == 1,5)) && ($0in_rising_edge($0in_delay(l2t1_sii_iq_dequeue,5))) && !(sii_wri_ecc6_l1_cycle4 == sii_l2b1_ecc[6]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc6_l1_wri_cycle4
*/

wire sii_wri_ecc0_l1_cycle5 =  (`TOP.cpu.sii_l2t1_req[0] ^ `TOP.cpu.sii_l2t1_req[1] ^ `TOP.cpu.sii_l2t1_req[3] ^ `TOP.cpu.sii_l2t1_req[4] ^ `TOP.cpu.sii_l2t1_req[6] ^ `TOP.cpu.sii_l2t1_req[8] ^ `TOP.cpu.sii_l2t1_req[10] ^ `TOP.cpu.sii_l2t1_req[11] ^ `TOP.cpu.sii_l2t1_req[13] ^ `TOP.cpu.sii_l2t1_req[15] ^ `TOP.cpu.sii_l2t1_req[17] ^ `TOP.cpu.sii_l2t1_req[19] ^ `TOP.cpu.sii_l2t1_req[21] ^ `TOP.cpu.sii_l2t1_req[23] ^ `TOP.cpu.sii_l2t1_req[25] ^ `TOP.cpu.sii_l2t1_req[26] ^ `TOP.cpu.sii_l2t1_req[28] ^ `TOP.cpu.sii_l2t1_req[30] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t1_req_vld,6))) && ($0in_delay(sii_l2t1_req[24] == 0,6)) && ($0in_delay(sii_l2t1_req[25] == 0,6)) && ($0in_delay(sii_l2t1_req[26] == 1,6)) && ($0in_rising_edge($0in_delay(l2t1_sii_iq_dequeue,6))) && !(sii_wri_ecc0_l1_cycle5 == sii_l2b1_ecc[0]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc0_l1_wri_cycle5
*/

wire sii_wri_ecc1_l1_cycle5 =  (`TOP.cpu.sii_l2t1_req[0] ^ `TOP.cpu.sii_l2t1_req[2] ^ `TOP.cpu.sii_l2t1_req[3] ^ `TOP.cpu.sii_l2t1_req[5] ^ `TOP.cpu.sii_l2t1_req[6] ^ `TOP.cpu.sii_l2t1_req[9] ^ `TOP.cpu.sii_l2t1_req[10] ^ `TOP.cpu.sii_l2t1_req[12] ^ `TOP.cpu.sii_l2t1_req[13] ^ `TOP.cpu.sii_l2t1_req[16] ^ `TOP.cpu.sii_l2t1_req[17] ^ `TOP.cpu.sii_l2t1_req[20] ^ `TOP.cpu.sii_l2t1_req[21] ^ `TOP.cpu.sii_l2t1_req[24] ^ `TOP.cpu.sii_l2t1_req[25] ^ `TOP.cpu.sii_l2t1_req[27] ^ `TOP.cpu.sii_l2t1_req[28] ^ `TOP.cpu.sii_l2t1_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t1_req_vld,6))) && ($0in_delay(sii_l2t1_req[24] == 0,6)) && ($0in_delay(sii_l2t1_req[25] == 0,6)) && ($0in_delay(sii_l2t1_req[26] == 1,6)) && ($0in_rising_edge($0in_delay(l2t1_sii_iq_dequeue,6))) && !(sii_wri_ecc1_l1_cycle5 == sii_l2b1_ecc[1]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc1_l1_wri_cycle5
*/

wire sii_wri_ecc2_l1_cycle5 =  (`TOP.cpu.sii_l2t1_req[1] ^ `TOP.cpu.sii_l2t1_req[2] ^ `TOP.cpu.sii_l2t1_req[3] ^ `TOP.cpu.sii_l2t1_req[7] ^ `TOP.cpu.sii_l2t1_req[8] ^ `TOP.cpu.sii_l2t1_req[9] ^ `TOP.cpu.sii_l2t1_req[10] ^ `TOP.cpu.sii_l2t1_req[14] ^ `TOP.cpu.sii_l2t1_req[15] ^ `TOP.cpu.sii_l2t1_req[16] ^ `TOP.cpu.sii_l2t1_req[17] ^ `TOP.cpu.sii_l2t1_req[22] ^ `TOP.cpu.sii_l2t1_req[23] ^ `TOP.cpu.sii_l2t1_req[24] ^ `TOP.cpu.sii_l2t1_req[25] ^ `TOP.cpu.sii_l2t1_req[29] ^ `TOP.cpu.sii_l2t1_req[30] ^ `TOP.cpu.sii_l2t1_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t1_req_vld,6))) && ($0in_delay(sii_l2t1_req[24] == 0,6)) && ($0in_delay(sii_l2t1_req[25] == 0,6)) && ($0in_delay(sii_l2t1_req[26] == 1,6)) && ($0in_rising_edge($0in_delay(l2t1_sii_iq_dequeue,6))) && !(sii_wri_ecc2_l1_cycle5 == sii_l2b1_ecc[2]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc2_l1_wri_cycle5
*/

wire sii_wri_ecc3_l1_cycle5 =  (`TOP.cpu.sii_l2t1_req[4] ^ `TOP.cpu.sii_l2t1_req[5] ^ `TOP.cpu.sii_l2t1_req[6] ^ `TOP.cpu.sii_l2t1_req[7] ^ `TOP.cpu.sii_l2t1_req[8] ^ `TOP.cpu.sii_l2t1_req[9] ^ `TOP.cpu.sii_l2t1_req[10] ^ `TOP.cpu.sii_l2t1_req[18] ^ `TOP.cpu.sii_l2t1_req[19] ^ `TOP.cpu.sii_l2t1_req[20] ^ `TOP.cpu.sii_l2t1_req[21] ^ `TOP.cpu.sii_l2t1_req[22] ^ `TOP.cpu.sii_l2t1_req[23] ^ `TOP.cpu.sii_l2t1_req[24] ^ `TOP.cpu.sii_l2t1_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t1_req_vld,6))) && ($0in_delay(sii_l2t1_req[24] == 0,6)) && ($0in_delay(sii_l2t1_req[25] == 0,6)) && ($0in_delay(sii_l2t1_req[26] == 1,6)) && ($0in_rising_edge($0in_delay(l2t1_sii_iq_dequeue,6))) && !(sii_wri_ecc3_l1_cycle5 == sii_l2b1_ecc[3]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc3_l1_wri_cycle5
*/

wire sii_wri_ecc4_l1_cycle5 =  ( `TOP.cpu.sii_l2t1_req[11] ^ `TOP.cpu.sii_l2t1_req[12] ^ `TOP.cpu.sii_l2t1_req[13] ^ `TOP.cpu.sii_l2t1_req[14] ^ `TOP.cpu.sii_l2t1_req[15] ^ `TOP.cpu.sii_l2t1_req[16] ^ `TOP.cpu.sii_l2t1_req[17] ^ `TOP.cpu.sii_l2t1_req[18] ^ `TOP.cpu.sii_l2t1_req[19] ^ `TOP.cpu.sii_l2t1_req[20] ^ `TOP.cpu.sii_l2t1_req[21] ^ `TOP.cpu.sii_l2t1_req[22] ^ `TOP.cpu.sii_l2t1_req[23] ^ `TOP.cpu.sii_l2t1_req[24] ^ `TOP.cpu.sii_l2t1_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t1_req_vld,6))) && ($0in_delay(sii_l2t1_req[24] == 0,6)) && ($0in_delay(sii_l2t1_req[25] == 0,6)) && ($0in_delay(sii_l2t1_req[26] == 1,6)) && ($0in_rising_edge($0in_delay(l2t1_sii_iq_dequeue,6))) && !(sii_wri_ecc4_l1_cycle5 == sii_l2b1_ecc[4]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc4_l1_wri_cycle5
*/

wire sii_wri_ecc5_l1_cycle5 =  (`TOP.cpu.sii_l2t1_req[26] ^ `TOP.cpu.sii_l2t1_req[27] ^ `TOP.cpu.sii_l2t1_req[28] ^ `TOP.cpu.sii_l2t1_req[29] ^ `TOP.cpu.sii_l2t1_req[30] ^ `TOP.cpu.sii_l2t1_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t1_req_vld,6))) && ($0in_delay(sii_l2t1_req[24] == 0,6)) && ($0in_delay(sii_l2t1_req[25] == 0,2)) && ($0in_delay(sii_l2t1_req[26] == 1,6)) && ($0in_rising_edge($0in_delay(l2t1_sii_iq_dequeue,6))) && !(sii_wri_ecc5_l1_cycle5 == sii_l2b1_ecc[5]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc5_l1_wri_cycle5
*/

wire sii_wri_ecc6_l1_cycle5 =  (`TOP.cpu.sii_l2t1_req[0] ^ `TOP.cpu.sii_l2t1_req[1] ^ `TOP.cpu.sii_l2t1_req[2] ^ `TOP.cpu.sii_l2t1_req[4] ^ `TOP.cpu.sii_l2t1_req[5] ^ `TOP.cpu.sii_l2t1_req[7] ^ `TOP.cpu.sii_l2t1_req[10] ^ `TOP.cpu.sii_l2t1_req[11] ^ `TOP.cpu.sii_l2t1_req[12] ^ `TOP.cpu.sii_l2t1_req[14] ^ `TOP.cpu.sii_l2t1_req[17] ^ `TOP.cpu.sii_l2t1_req[18] ^ `TOP.cpu.sii_l2t1_req[21] ^ `TOP.cpu.sii_l2t1_req[23] ^ `TOP.cpu.sii_l2t1_req[24] ^ `TOP.cpu.sii_l2t1_req[26] ^ `TOP.cpu.sii_l2t1_req[27] ^ `TOP.cpu.sii_l2t1_req[29] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t1_req_vld,6))) && ($0in_delay(sii_l2t1_req[24] == 0,6)) && ($0in_delay(sii_l2t1_req[25] == 0,6)) && ($0in_delay(sii_l2t1_req[26] == 1,6)) && ($0in_rising_edge($0in_delay(l2t1_sii_iq_dequeue,6))) && !(sii_wri_ecc6_l1_cycle5 == sii_l2b1_ecc[6]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc6_l1_wri_cycle5
*/

wire sii_wri_ecc0_l1_cycle6 =  (`TOP.cpu.sii_l2t1_req[0] ^ `TOP.cpu.sii_l2t1_req[1] ^ `TOP.cpu.sii_l2t1_req[3] ^ `TOP.cpu.sii_l2t1_req[4] ^ `TOP.cpu.sii_l2t1_req[6] ^ `TOP.cpu.sii_l2t1_req[8] ^ `TOP.cpu.sii_l2t1_req[10] ^ `TOP.cpu.sii_l2t1_req[11] ^ `TOP.cpu.sii_l2t1_req[13] ^ `TOP.cpu.sii_l2t1_req[15] ^ `TOP.cpu.sii_l2t1_req[17] ^ `TOP.cpu.sii_l2t1_req[19] ^ `TOP.cpu.sii_l2t1_req[21] ^ `TOP.cpu.sii_l2t1_req[23] ^ `TOP.cpu.sii_l2t1_req[25] ^ `TOP.cpu.sii_l2t1_req[26] ^ `TOP.cpu.sii_l2t1_req[28] ^ `TOP.cpu.sii_l2t1_req[30] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t1_req_vld,7))) && ($0in_delay(sii_l2t1_req[24] == 0,7)) && ($0in_delay(sii_l2t1_req[25] == 0,7)) && ($0in_delay(sii_l2t1_req[26] == 1,7)) && ($0in_rising_edge($0in_delay(l2t1_sii_iq_dequeue,7))) && !(sii_wri_ecc0_l1_cycle6 == sii_l2b1_ecc[0]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc0_l1_wri_cycle6
*/

wire sii_wri_ecc1_l1_cycle6 =  (`TOP.cpu.sii_l2t1_req[0] ^ `TOP.cpu.sii_l2t1_req[2] ^ `TOP.cpu.sii_l2t1_req[3] ^ `TOP.cpu.sii_l2t1_req[5] ^ `TOP.cpu.sii_l2t1_req[6] ^ `TOP.cpu.sii_l2t1_req[9] ^ `TOP.cpu.sii_l2t1_req[10] ^ `TOP.cpu.sii_l2t1_req[12] ^ `TOP.cpu.sii_l2t1_req[13] ^ `TOP.cpu.sii_l2t1_req[16] ^ `TOP.cpu.sii_l2t1_req[17] ^ `TOP.cpu.sii_l2t1_req[20] ^ `TOP.cpu.sii_l2t1_req[21] ^ `TOP.cpu.sii_l2t1_req[24] ^ `TOP.cpu.sii_l2t1_req[25] ^ `TOP.cpu.sii_l2t1_req[27] ^ `TOP.cpu.sii_l2t1_req[28] ^ `TOP.cpu.sii_l2t1_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t1_req_vld,7))) && ($0in_delay(sii_l2t1_req[24] == 0,7)) && ($0in_delay(sii_l2t1_req[25] == 0,7)) && ($0in_delay(sii_l2t1_req[26] == 1,7)) && ($0in_rising_edge($0in_delay(l2t1_sii_iq_dequeue,7))) && !(sii_wri_ecc1_l1_cycle6 == sii_l2b1_ecc[1]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc1_l1_wri_cycle6
*/

wire sii_wri_ecc2_l1_cycle6 =  (`TOP.cpu.sii_l2t1_req[1] ^ `TOP.cpu.sii_l2t1_req[2] ^ `TOP.cpu.sii_l2t1_req[3] ^ `TOP.cpu.sii_l2t1_req[7] ^ `TOP.cpu.sii_l2t1_req[8] ^ `TOP.cpu.sii_l2t1_req[9] ^ `TOP.cpu.sii_l2t1_req[10] ^ `TOP.cpu.sii_l2t1_req[14] ^ `TOP.cpu.sii_l2t1_req[15] ^ `TOP.cpu.sii_l2t1_req[16] ^ `TOP.cpu.sii_l2t1_req[17] ^ `TOP.cpu.sii_l2t1_req[22] ^ `TOP.cpu.sii_l2t1_req[23] ^ `TOP.cpu.sii_l2t1_req[24] ^ `TOP.cpu.sii_l2t1_req[25] ^ `TOP.cpu.sii_l2t1_req[29] ^ `TOP.cpu.sii_l2t1_req[30] ^ `TOP.cpu.sii_l2t1_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t1_req_vld,7))) && ($0in_delay(sii_l2t1_req[24] == 0,7)) && ($0in_delay(sii_l2t1_req[25] == 0,7)) && ($0in_delay(sii_l2t1_req[26] == 1,7)) && ($0in_rising_edge($0in_delay(l2t1_sii_iq_dequeue,7))) && !(sii_wri_ecc2_l1_cycle6 == sii_l2b1_ecc[2]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc2_l1_wri_cycle6
*/

wire sii_wri_ecc3_l1_cycle6 =  (`TOP.cpu.sii_l2t1_req[4] ^ `TOP.cpu.sii_l2t1_req[5] ^ `TOP.cpu.sii_l2t1_req[6] ^ `TOP.cpu.sii_l2t1_req[7] ^ `TOP.cpu.sii_l2t1_req[8] ^ `TOP.cpu.sii_l2t1_req[9] ^ `TOP.cpu.sii_l2t1_req[10] ^ `TOP.cpu.sii_l2t1_req[18] ^ `TOP.cpu.sii_l2t1_req[19] ^ `TOP.cpu.sii_l2t1_req[20] ^ `TOP.cpu.sii_l2t1_req[21] ^ `TOP.cpu.sii_l2t1_req[22] ^ `TOP.cpu.sii_l2t1_req[23] ^ `TOP.cpu.sii_l2t1_req[24] ^ `TOP.cpu.sii_l2t1_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t1_req_vld,7))) && ($0in_delay(sii_l2t1_req[24] == 0,7)) && ($0in_delay(sii_l2t1_req[25] == 0,7)) && ($0in_delay(sii_l2t1_req[26] == 1,7)) && ($0in_rising_edge($0in_delay(l2t1_sii_iq_dequeue,7))) && !(sii_wri_ecc3_l1_cycle6 == sii_l2b1_ecc[3]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc3_l1_wri_cycle6
*/

wire sii_wri_ecc4_l1_cycle6 =  ( `TOP.cpu.sii_l2t1_req[11] ^ `TOP.cpu.sii_l2t1_req[12] ^ `TOP.cpu.sii_l2t1_req[13] ^ `TOP.cpu.sii_l2t1_req[14] ^ `TOP.cpu.sii_l2t1_req[15] ^ `TOP.cpu.sii_l2t1_req[16] ^ `TOP.cpu.sii_l2t1_req[17] ^ `TOP.cpu.sii_l2t1_req[18] ^ `TOP.cpu.sii_l2t1_req[19] ^ `TOP.cpu.sii_l2t1_req[20] ^ `TOP.cpu.sii_l2t1_req[21] ^ `TOP.cpu.sii_l2t1_req[22] ^ `TOP.cpu.sii_l2t1_req[23] ^ `TOP.cpu.sii_l2t1_req[24] ^ `TOP.cpu.sii_l2t1_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t1_req_vld,7))) && ($0in_delay(sii_l2t1_req[24] == 0,7)) && ($0in_delay(sii_l2t1_req[25] == 0,7)) && ($0in_delay(sii_l2t1_req[26] == 1,7)) && ($0in_rising_edge($0in_delay(l2t1_sii_iq_dequeue,7))) && !(sii_wri_ecc4_l1_cycle6 == sii_l2b1_ecc[4]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc4_l1_wri_cycle6
*/

wire sii_wri_ecc5_l1_cycle6 =  (`TOP.cpu.sii_l2t1_req[26] ^ `TOP.cpu.sii_l2t1_req[27] ^ `TOP.cpu.sii_l2t1_req[28] ^ `TOP.cpu.sii_l2t1_req[29] ^ `TOP.cpu.sii_l2t1_req[30] ^ `TOP.cpu.sii_l2t1_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t1_req_vld,7))) && ($0in_delay(sii_l2t1_req[24] == 0,7)) && ($0in_delay(sii_l2t1_req[25] == 0,7)) && ($0in_delay(sii_l2t1_req[26] == 1,7)) && ($0in_rising_edge($0in_delay(l2t1_sii_iq_dequeue,7))) && !(sii_wri_ecc5_l1_cycle6 == sii_l2b1_ecc[5]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc5_l1_wri_cycle6
*/

wire sii_wri_ecc6_l1_cycle6 =  (`TOP.cpu.sii_l2t1_req[0] ^ `TOP.cpu.sii_l2t1_req[1] ^ `TOP.cpu.sii_l2t1_req[2] ^ `TOP.cpu.sii_l2t1_req[4] ^ `TOP.cpu.sii_l2t1_req[5] ^ `TOP.cpu.sii_l2t1_req[7] ^ `TOP.cpu.sii_l2t1_req[10] ^ `TOP.cpu.sii_l2t1_req[11] ^ `TOP.cpu.sii_l2t1_req[12] ^ `TOP.cpu.sii_l2t1_req[14] ^ `TOP.cpu.sii_l2t1_req[17] ^ `TOP.cpu.sii_l2t1_req[18] ^ `TOP.cpu.sii_l2t1_req[21] ^ `TOP.cpu.sii_l2t1_req[23] ^ `TOP.cpu.sii_l2t1_req[24] ^ `TOP.cpu.sii_l2t1_req[26] ^ `TOP.cpu.sii_l2t1_req[27] ^ `TOP.cpu.sii_l2t1_req[29] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t1_req_vld,7))) && ($0in_delay(sii_l2t1_req[24] == 0,7)) && ($0in_delay(sii_l2t1_req[25] == 0,7)) && ($0in_delay(sii_l2t1_req[26] == 1,7)) && ($0in_rising_edge($0in_delay(l2t1_sii_iq_dequeue,7))) && !(sii_wri_ecc6_l1_cycle6 == sii_l2b1_ecc[6]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc6_l1_wri_cycle6
*/

wire sii_wri_ecc0_l1_cycle7 =  (`TOP.cpu.sii_l2t1_req[0] ^ `TOP.cpu.sii_l2t1_req[1] ^ `TOP.cpu.sii_l2t1_req[3] ^ `TOP.cpu.sii_l2t1_req[4] ^ `TOP.cpu.sii_l2t1_req[6] ^ `TOP.cpu.sii_l2t1_req[8] ^ `TOP.cpu.sii_l2t1_req[10] ^ `TOP.cpu.sii_l2t1_req[11] ^ `TOP.cpu.sii_l2t1_req[13] ^ `TOP.cpu.sii_l2t1_req[15] ^ `TOP.cpu.sii_l2t1_req[17] ^ `TOP.cpu.sii_l2t1_req[19] ^ `TOP.cpu.sii_l2t1_req[21] ^ `TOP.cpu.sii_l2t1_req[23] ^ `TOP.cpu.sii_l2t1_req[25] ^ `TOP.cpu.sii_l2t1_req[26] ^ `TOP.cpu.sii_l2t1_req[28] ^ `TOP.cpu.sii_l2t1_req[30] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t1_req_vld,8))) && ($0in_delay(sii_l2t1_req[24] == 0,8)) && ($0in_delay(sii_l2t1_req[25] == 0,8)) && ($0in_delay(sii_l2t1_req[26] == 1,8)) && ($0in_rising_edge($0in_delay(l2t1_sii_iq_dequeue,8))) && !(sii_wri_ecc0_l1_cycle7 == sii_l2b1_ecc[0]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc0_l1_wri_cycle7
*/

wire sii_wri_ecc1_l1_cycle7 =  (`TOP.cpu.sii_l2t1_req[0] ^ `TOP.cpu.sii_l2t1_req[2] ^ `TOP.cpu.sii_l2t1_req[3] ^ `TOP.cpu.sii_l2t1_req[5] ^ `TOP.cpu.sii_l2t1_req[6] ^ `TOP.cpu.sii_l2t1_req[9] ^ `TOP.cpu.sii_l2t1_req[10] ^ `TOP.cpu.sii_l2t1_req[12] ^ `TOP.cpu.sii_l2t1_req[13] ^ `TOP.cpu.sii_l2t1_req[16] ^ `TOP.cpu.sii_l2t1_req[17] ^ `TOP.cpu.sii_l2t1_req[20] ^ `TOP.cpu.sii_l2t1_req[21] ^ `TOP.cpu.sii_l2t1_req[24] ^ `TOP.cpu.sii_l2t1_req[25] ^ `TOP.cpu.sii_l2t1_req[27] ^ `TOP.cpu.sii_l2t1_req[28] ^ `TOP.cpu.sii_l2t1_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t1_req_vld,8))) && ($0in_delay(sii_l2t1_req[24] == 0,8)) && ($0in_delay(sii_l2t1_req[25] == 0,8)) && ($0in_delay(sii_l2t1_req[26] == 1,8)) && ($0in_rising_edge($0in_delay(l2t1_sii_iq_dequeue,8))) && !(sii_wri_ecc1_l1_cycle7 == sii_l2b1_ecc[1]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc1_l1_wri_cycle7
*/

wire sii_wri_ecc2_l1_cycle7 =  (`TOP.cpu.sii_l2t1_req[1] ^ `TOP.cpu.sii_l2t1_req[2] ^ `TOP.cpu.sii_l2t1_req[3] ^ `TOP.cpu.sii_l2t1_req[7] ^ `TOP.cpu.sii_l2t1_req[8] ^ `TOP.cpu.sii_l2t1_req[9] ^ `TOP.cpu.sii_l2t1_req[10] ^ `TOP.cpu.sii_l2t1_req[14] ^ `TOP.cpu.sii_l2t1_req[15] ^ `TOP.cpu.sii_l2t1_req[16] ^ `TOP.cpu.sii_l2t1_req[17] ^ `TOP.cpu.sii_l2t1_req[22] ^ `TOP.cpu.sii_l2t1_req[23] ^ `TOP.cpu.sii_l2t1_req[24] ^ `TOP.cpu.sii_l2t1_req[25] ^ `TOP.cpu.sii_l2t1_req[29] ^ `TOP.cpu.sii_l2t1_req[30] ^ `TOP.cpu.sii_l2t1_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t1_req_vld,8))) && ($0in_delay(sii_l2t1_req[24] == 0,8)) && ($0in_delay(sii_l2t1_req[25] == 0,8)) && ($0in_delay(sii_l2t1_req[26] == 1,8)) && ($0in_rising_edge($0in_delay(l2t1_sii_iq_dequeue,8))) && !(sii_wri_ecc2_l1_cycle7 == sii_l2b1_ecc[2]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc2_l1_wri_cycle7
*/

wire sii_wri_ecc3_l1_cycle7 =  (`TOP.cpu.sii_l2t1_req[4] ^ `TOP.cpu.sii_l2t1_req[5] ^ `TOP.cpu.sii_l2t1_req[6] ^ `TOP.cpu.sii_l2t1_req[7] ^ `TOP.cpu.sii_l2t1_req[8] ^ `TOP.cpu.sii_l2t1_req[9] ^ `TOP.cpu.sii_l2t1_req[10] ^ `TOP.cpu.sii_l2t1_req[18] ^ `TOP.cpu.sii_l2t1_req[19] ^ `TOP.cpu.sii_l2t1_req[20] ^ `TOP.cpu.sii_l2t1_req[21] ^ `TOP.cpu.sii_l2t1_req[22] ^ `TOP.cpu.sii_l2t1_req[23] ^ `TOP.cpu.sii_l2t1_req[24] ^ `TOP.cpu.sii_l2t1_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t1_req_vld,8))) && ($0in_delay(sii_l2t1_req[24] == 0,8)) && ($0in_delay(sii_l2t1_req[25] == 0,8)) && ($0in_delay(sii_l2t1_req[26] == 1,8)) && ($0in_rising_edge($0in_delay(l2t1_sii_iq_dequeue,8))) && !(sii_wri_ecc3_l1_cycle7 == sii_l2b1_ecc[3]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc3_l1_wri_cycle7
*/

wire sii_wri_ecc4_l1_cycle7 =  ( `TOP.cpu.sii_l2t1_req[11] ^ `TOP.cpu.sii_l2t1_req[12] ^ `TOP.cpu.sii_l2t1_req[13] ^ `TOP.cpu.sii_l2t1_req[14] ^ `TOP.cpu.sii_l2t1_req[15] ^ `TOP.cpu.sii_l2t1_req[16] ^ `TOP.cpu.sii_l2t1_req[17] ^ `TOP.cpu.sii_l2t1_req[18] ^ `TOP.cpu.sii_l2t1_req[19] ^ `TOP.cpu.sii_l2t1_req[20] ^ `TOP.cpu.sii_l2t1_req[21] ^ `TOP.cpu.sii_l2t1_req[22] ^ `TOP.cpu.sii_l2t1_req[23] ^ `TOP.cpu.sii_l2t1_req[24] ^ `TOP.cpu.sii_l2t1_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t1_req_vld,8))) && ($0in_delay(sii_l2t1_req[24] == 0,8)) && ($0in_delay(sii_l2t1_req[25] == 0,8)) && ($0in_delay(sii_l2t1_req[26] == 1,8)) && ($0in_rising_edge($0in_delay(l2t1_sii_iq_dequeue,8))) && !(sii_wri_ecc4_l1_cycle7 == sii_l2b1_ecc[4]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc4_l1_wri_cycle7
*/

wire sii_wri_ecc5_l1_cycle7 =  (`TOP.cpu.sii_l2t1_req[26] ^ `TOP.cpu.sii_l2t1_req[27] ^ `TOP.cpu.sii_l2t1_req[28] ^ `TOP.cpu.sii_l2t1_req[29] ^ `TOP.cpu.sii_l2t1_req[30] ^ `TOP.cpu.sii_l2t1_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t1_req_vld,8))) && ($0in_delay(sii_l2t1_req[24] == 0,8)) && ($0in_delay(sii_l2t1_req[25] == 0,8)) && ($0in_delay(sii_l2t1_req[26] == 1,8)) && ($0in_rising_edge($0in_delay(l2t1_sii_iq_dequeue,8))) && !(sii_wri_ecc5_l1_cycle7 == sii_l2b1_ecc[5]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc5_l1_wri_cycle7
*/

wire sii_wri_ecc6_l1_cycle7 =  (`TOP.cpu.sii_l2t1_req[0] ^ `TOP.cpu.sii_l2t1_req[1] ^ `TOP.cpu.sii_l2t1_req[2] ^ `TOP.cpu.sii_l2t1_req[4] ^ `TOP.cpu.sii_l2t1_req[5] ^ `TOP.cpu.sii_l2t1_req[7] ^ `TOP.cpu.sii_l2t1_req[10] ^ `TOP.cpu.sii_l2t1_req[11] ^ `TOP.cpu.sii_l2t1_req[12] ^ `TOP.cpu.sii_l2t1_req[14] ^ `TOP.cpu.sii_l2t1_req[17] ^ `TOP.cpu.sii_l2t1_req[18] ^ `TOP.cpu.sii_l2t1_req[21] ^ `TOP.cpu.sii_l2t1_req[23] ^ `TOP.cpu.sii_l2t1_req[24] ^ `TOP.cpu.sii_l2t1_req[26] ^ `TOP.cpu.sii_l2t1_req[27] ^ `TOP.cpu.sii_l2t1_req[29] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t1_req_vld,8))) && ($0in_delay(sii_l2t1_req[24] == 0,8)) && ($0in_delay(sii_l2t1_req[25] == 0,8)) && ($0in_delay(sii_l2t1_req[26] == 1,8)) && ($0in_rising_edge($0in_delay(l2t1_sii_iq_dequeue,8))) && !(sii_wri_ecc6_l1_cycle7 == sii_l2b1_ecc[6]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc6_l1_wri_cycle7
*/

wire sii_wri_ecc0_l1_cycle8 =  (`TOP.cpu.sii_l2t1_req[0] ^ `TOP.cpu.sii_l2t1_req[1] ^ `TOP.cpu.sii_l2t1_req[3] ^ `TOP.cpu.sii_l2t1_req[4] ^ `TOP.cpu.sii_l2t1_req[6] ^ `TOP.cpu.sii_l2t1_req[8] ^ `TOP.cpu.sii_l2t1_req[10] ^ `TOP.cpu.sii_l2t1_req[11] ^ `TOP.cpu.sii_l2t1_req[13] ^ `TOP.cpu.sii_l2t1_req[15] ^ `TOP.cpu.sii_l2t1_req[17] ^ `TOP.cpu.sii_l2t1_req[19] ^ `TOP.cpu.sii_l2t1_req[21] ^ `TOP.cpu.sii_l2t1_req[23] ^ `TOP.cpu.sii_l2t1_req[25] ^ `TOP.cpu.sii_l2t1_req[26] ^ `TOP.cpu.sii_l2t1_req[28] ^ `TOP.cpu.sii_l2t1_req[30] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t1_req_vld,9))) && ($0in_delay(sii_l2t1_req[24] == 0,9)) && ($0in_delay(sii_l2t1_req[25] == 0,9)) && ($0in_delay(sii_l2t1_req[26] == 1,9)) && ($0in_rising_edge($0in_delay(l2t1_sii_iq_dequeue,9))) && !(sii_wri_ecc0_l1_cycle8 == sii_l2b1_ecc[0]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc0_l1_wri_cycle8
*/

wire sii_wri_ecc1_l1_cycle8 =  (`TOP.cpu.sii_l2t1_req[0] ^ `TOP.cpu.sii_l2t1_req[2] ^ `TOP.cpu.sii_l2t1_req[3] ^ `TOP.cpu.sii_l2t1_req[5] ^ `TOP.cpu.sii_l2t1_req[6] ^ `TOP.cpu.sii_l2t1_req[9] ^ `TOP.cpu.sii_l2t1_req[10] ^ `TOP.cpu.sii_l2t1_req[12] ^ `TOP.cpu.sii_l2t1_req[13] ^ `TOP.cpu.sii_l2t1_req[16] ^ `TOP.cpu.sii_l2t1_req[17] ^ `TOP.cpu.sii_l2t1_req[20] ^ `TOP.cpu.sii_l2t1_req[21] ^ `TOP.cpu.sii_l2t1_req[24] ^ `TOP.cpu.sii_l2t1_req[25] ^ `TOP.cpu.sii_l2t1_req[27] ^ `TOP.cpu.sii_l2t1_req[28] ^ `TOP.cpu.sii_l2t1_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t1_req_vld,9))) && ($0in_delay(sii_l2t1_req[24] == 0,9)) && ($0in_delay(sii_l2t1_req[25] == 0,9)) && ($0in_delay(sii_l2t1_req[26] == 1,9)) && ($0in_rising_edge($0in_delay(l2t1_sii_iq_dequeue,9))) && !(sii_wri_ecc1_l1_cycle8 == sii_l2b1_ecc[1]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc1_l1_wri_cycle8
*/

wire sii_wri_ecc2_l1_cycle8 =  (`TOP.cpu.sii_l2t1_req[1] ^ `TOP.cpu.sii_l2t1_req[2] ^ `TOP.cpu.sii_l2t1_req[3] ^ `TOP.cpu.sii_l2t1_req[7] ^ `TOP.cpu.sii_l2t1_req[8] ^ `TOP.cpu.sii_l2t1_req[9] ^ `TOP.cpu.sii_l2t1_req[10] ^ `TOP.cpu.sii_l2t1_req[14] ^ `TOP.cpu.sii_l2t1_req[15] ^ `TOP.cpu.sii_l2t1_req[16] ^ `TOP.cpu.sii_l2t1_req[17] ^ `TOP.cpu.sii_l2t1_req[22] ^ `TOP.cpu.sii_l2t1_req[23] ^ `TOP.cpu.sii_l2t1_req[24] ^ `TOP.cpu.sii_l2t1_req[25] ^ `TOP.cpu.sii_l2t1_req[29] ^ `TOP.cpu.sii_l2t1_req[30] ^ `TOP.cpu.sii_l2t1_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t1_req_vld,9))) && ($0in_delay(sii_l2t1_req[24] == 0,9)) && ($0in_delay(sii_l2t1_req[25] == 0,9)) && ($0in_delay(sii_l2t1_req[26] == 1,9)) && ($0in_rising_edge($0in_delay(l2t1_sii_iq_dequeue,9))) && !(sii_wri_ecc2_l1_cycle8 == sii_l2b1_ecc[2]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc2_l1_wri_cycle8
*/

wire sii_wri_ecc3_l1_cycle8 =  (`TOP.cpu.sii_l2t1_req[4] ^ `TOP.cpu.sii_l2t1_req[5] ^ `TOP.cpu.sii_l2t1_req[6] ^ `TOP.cpu.sii_l2t1_req[7] ^ `TOP.cpu.sii_l2t1_req[8] ^ `TOP.cpu.sii_l2t1_req[9] ^ `TOP.cpu.sii_l2t1_req[10] ^ `TOP.cpu.sii_l2t1_req[18] ^ `TOP.cpu.sii_l2t1_req[19] ^ `TOP.cpu.sii_l2t1_req[20] ^ `TOP.cpu.sii_l2t1_req[21] ^ `TOP.cpu.sii_l2t1_req[22] ^ `TOP.cpu.sii_l2t1_req[23] ^ `TOP.cpu.sii_l2t1_req[24] ^ `TOP.cpu.sii_l2t1_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t1_req_vld,9))) && ($0in_delay(sii_l2t1_req[24] == 0,9)) && ($0in_delay(sii_l2t1_req[25] == 0,9)) && ($0in_delay(sii_l2t1_req[26] == 1,9)) && ($0in_rising_edge($0in_delay(l2t1_sii_iq_dequeue,9))) && !(sii_wri_ecc3_l1_cycle8 == sii_l2b1_ecc[3]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc3_l1_wri_cycle8
*/

wire sii_wri_ecc4_l1_cycle8 =  ( `TOP.cpu.sii_l2t1_req[11] ^ `TOP.cpu.sii_l2t1_req[12] ^ `TOP.cpu.sii_l2t1_req[13] ^ `TOP.cpu.sii_l2t1_req[14] ^ `TOP.cpu.sii_l2t1_req[15] ^ `TOP.cpu.sii_l2t1_req[16] ^ `TOP.cpu.sii_l2t1_req[17] ^ `TOP.cpu.sii_l2t1_req[18] ^ `TOP.cpu.sii_l2t1_req[19] ^ `TOP.cpu.sii_l2t1_req[20] ^ `TOP.cpu.sii_l2t1_req[21] ^ `TOP.cpu.sii_l2t1_req[22] ^ `TOP.cpu.sii_l2t1_req[23] ^ `TOP.cpu.sii_l2t1_req[24] ^ `TOP.cpu.sii_l2t1_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t1_req_vld,9))) && ($0in_delay(sii_l2t1_req[24] == 0,9)) && ($0in_delay(sii_l2t1_req[25] == 0,9)) && ($0in_delay(sii_l2t1_req[26] == 1,9)) && ($0in_rising_edge($0in_delay(l2t1_sii_iq_dequeue,9))) && !(sii_wri_ecc4_l1_cycle8 == sii_l2b1_ecc[4]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc4_l1_wri_cycle8
*/

wire sii_wri_ecc5_l1_cycle8 =  (`TOP.cpu.sii_l2t1_req[26] ^ `TOP.cpu.sii_l2t1_req[27] ^ `TOP.cpu.sii_l2t1_req[28] ^ `TOP.cpu.sii_l2t1_req[29] ^ `TOP.cpu.sii_l2t1_req[30] ^ `TOP.cpu.sii_l2t1_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t1_req_vld,9))) && ($0in_delay(sii_l2t1_req[24] == 0,9)) && ($0in_delay(sii_l2t1_req[25] == 0,9)) && ($0in_delay(sii_l2t1_req[26] == 1,9)) && ($0in_rising_edge($0in_delay(l2t1_sii_iq_dequeue,9))) && !(sii_wri_ecc5_l1_cycle8 == sii_l2b1_ecc[5]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc5_l1_wri_cycle8
*/

wire sii_wri_ecc6_l1_cycle8 =  (`TOP.cpu.sii_l2t1_req[0] ^ `TOP.cpu.sii_l2t1_req[1] ^ `TOP.cpu.sii_l2t1_req[2] ^ `TOP.cpu.sii_l2t1_req[4] ^ `TOP.cpu.sii_l2t1_req[5] ^ `TOP.cpu.sii_l2t1_req[7] ^ `TOP.cpu.sii_l2t1_req[10] ^ `TOP.cpu.sii_l2t1_req[11] ^ `TOP.cpu.sii_l2t1_req[12] ^ `TOP.cpu.sii_l2t1_req[14] ^ `TOP.cpu.sii_l2t1_req[17] ^ `TOP.cpu.sii_l2t1_req[18] ^ `TOP.cpu.sii_l2t1_req[21] ^ `TOP.cpu.sii_l2t1_req[23] ^ `TOP.cpu.sii_l2t1_req[24] ^ `TOP.cpu.sii_l2t1_req[26] ^ `TOP.cpu.sii_l2t1_req[27] ^ `TOP.cpu.sii_l2t1_req[29] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t1_req_vld,9))) && ($0in_delay(sii_l2t1_req[24] == 0,9)) && ($0in_delay(sii_l2t1_req[25] == 0,9)) && ($0in_delay(sii_l2t1_req[26] == 1,9)) && ($0in_rising_edge($0in_delay(l2t1_sii_iq_dequeue,9))) && !(sii_wri_ecc6_l1_cycle8 == sii_l2b1_ecc[6]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc6_l1_wri_cycle8
*/

wire sii_wri_ecc0_l1_cycle9 =  (`TOP.cpu.sii_l2t1_req[0] ^ `TOP.cpu.sii_l2t1_req[1] ^ `TOP.cpu.sii_l2t1_req[3] ^ `TOP.cpu.sii_l2t1_req[4] ^ `TOP.cpu.sii_l2t1_req[6] ^ `TOP.cpu.sii_l2t1_req[8] ^ `TOP.cpu.sii_l2t1_req[10] ^ `TOP.cpu.sii_l2t1_req[11] ^ `TOP.cpu.sii_l2t1_req[13] ^ `TOP.cpu.sii_l2t1_req[15] ^ `TOP.cpu.sii_l2t1_req[17] ^ `TOP.cpu.sii_l2t1_req[19] ^ `TOP.cpu.sii_l2t1_req[21] ^ `TOP.cpu.sii_l2t1_req[23] ^ `TOP.cpu.sii_l2t1_req[25] ^ `TOP.cpu.sii_l2t1_req[26] ^ `TOP.cpu.sii_l2t1_req[28] ^ `TOP.cpu.sii_l2t1_req[30] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t1_req_vld,10))) && ($0in_delay(sii_l2t1_req[24] == 0,10)) && ($0in_delay(sii_l2t1_req[25] == 0,10)) && ($0in_delay(sii_l2t1_req[26] == 1,10)) && ($0in_rising_edge($0in_delay(l2t1_sii_iq_dequeue,10))) && !(sii_wri_ecc0_l1_cycle9 == sii_l2b1_ecc[0]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc0_l1_wri_cycle9
*/

wire sii_wri_ecc1_l1_cycle9 =  (`TOP.cpu.sii_l2t1_req[0] ^ `TOP.cpu.sii_l2t1_req[2] ^ `TOP.cpu.sii_l2t1_req[3] ^ `TOP.cpu.sii_l2t1_req[5] ^ `TOP.cpu.sii_l2t1_req[6] ^ `TOP.cpu.sii_l2t1_req[9] ^ `TOP.cpu.sii_l2t1_req[10] ^ `TOP.cpu.sii_l2t1_req[12] ^ `TOP.cpu.sii_l2t1_req[13] ^ `TOP.cpu.sii_l2t1_req[16] ^ `TOP.cpu.sii_l2t1_req[17] ^ `TOP.cpu.sii_l2t1_req[20] ^ `TOP.cpu.sii_l2t1_req[21] ^ `TOP.cpu.sii_l2t1_req[24] ^ `TOP.cpu.sii_l2t1_req[25] ^ `TOP.cpu.sii_l2t1_req[27] ^ `TOP.cpu.sii_l2t1_req[28] ^ `TOP.cpu.sii_l2t1_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t1_req_vld,10))) && ($0in_delay(sii_l2t1_req[24] == 0,10)) && ($0in_delay(sii_l2t1_req[25] == 0,10)) && ($0in_delay(sii_l2t1_req[26] == 1,10)) && ($0in_rising_edge($0in_delay(l2t1_sii_iq_dequeue,10))) && !(sii_wri_ecc1_l1_cycle9 == sii_l2b1_ecc[1]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc1_l1_wri_cycle9
*/

wire sii_wri_ecc2_l1_cycle9 =  (`TOP.cpu.sii_l2t1_req[1] ^ `TOP.cpu.sii_l2t1_req[2] ^ `TOP.cpu.sii_l2t1_req[3] ^ `TOP.cpu.sii_l2t1_req[7] ^ `TOP.cpu.sii_l2t1_req[8] ^ `TOP.cpu.sii_l2t1_req[9] ^ `TOP.cpu.sii_l2t1_req[10] ^ `TOP.cpu.sii_l2t1_req[14] ^ `TOP.cpu.sii_l2t1_req[15] ^ `TOP.cpu.sii_l2t1_req[16] ^ `TOP.cpu.sii_l2t1_req[17] ^ `TOP.cpu.sii_l2t1_req[22] ^ `TOP.cpu.sii_l2t1_req[23] ^ `TOP.cpu.sii_l2t1_req[24] ^ `TOP.cpu.sii_l2t1_req[25] ^ `TOP.cpu.sii_l2t1_req[29] ^ `TOP.cpu.sii_l2t1_req[30] ^ `TOP.cpu.sii_l2t1_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t1_req_vld,10))) && ($0in_delay(sii_l2t1_req[24] == 0,10)) && ($0in_delay(sii_l2t1_req[25] == 0,10)) && ($0in_delay(sii_l2t1_req[26] == 1,10)) && ($0in_rising_edge($0in_delay(l2t1_sii_iq_dequeue,10))) && !(sii_wri_ecc2_l1_cycle9 == sii_l2b1_ecc[2]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc2_l1_wri_cycle9
*/

wire sii_wri_ecc3_l1_cycle9 =  (`TOP.cpu.sii_l2t1_req[4] ^ `TOP.cpu.sii_l2t1_req[5] ^ `TOP.cpu.sii_l2t1_req[6] ^ `TOP.cpu.sii_l2t1_req[7] ^ `TOP.cpu.sii_l2t1_req[8] ^ `TOP.cpu.sii_l2t1_req[9] ^ `TOP.cpu.sii_l2t1_req[10] ^ `TOP.cpu.sii_l2t1_req[18] ^ `TOP.cpu.sii_l2t1_req[19] ^ `TOP.cpu.sii_l2t1_req[20] ^ `TOP.cpu.sii_l2t1_req[21] ^ `TOP.cpu.sii_l2t1_req[22] ^ `TOP.cpu.sii_l2t1_req[23] ^ `TOP.cpu.sii_l2t1_req[24] ^ `TOP.cpu.sii_l2t1_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t1_req_vld,10))) && ($0in_delay(sii_l2t1_req[24] == 0,10)) && ($0in_delay(sii_l2t1_req[25] == 0,10)) && ($0in_delay(sii_l2t1_req[26] == 1,10)) && ($0in_rising_edge($0in_delay(l2t1_sii_iq_dequeue,10))) && !(sii_wri_ecc3_l1_cycle9 == sii_l2b1_ecc[3]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc3_l1_wri_cycle9
*/

wire sii_wri_ecc4_l1_cycle9 =  ( `TOP.cpu.sii_l2t1_req[11] ^ `TOP.cpu.sii_l2t1_req[12] ^ `TOP.cpu.sii_l2t1_req[13] ^ `TOP.cpu.sii_l2t1_req[14] ^ `TOP.cpu.sii_l2t1_req[15] ^ `TOP.cpu.sii_l2t1_req[16] ^ `TOP.cpu.sii_l2t1_req[17] ^ `TOP.cpu.sii_l2t1_req[18] ^ `TOP.cpu.sii_l2t1_req[19] ^ `TOP.cpu.sii_l2t1_req[20] ^ `TOP.cpu.sii_l2t1_req[21] ^ `TOP.cpu.sii_l2t1_req[22] ^ `TOP.cpu.sii_l2t1_req[23] ^ `TOP.cpu.sii_l2t1_req[24] ^ `TOP.cpu.sii_l2t1_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t1_req_vld,10))) && ($0in_delay(sii_l2t1_req[24] == 0,10)) && ($0in_delay(sii_l2t1_req[25] == 0,10)) && ($0in_delay(sii_l2t1_req[26] == 1,10)) && ($0in_rising_edge($0in_delay(l2t1_sii_iq_dequeue,10))) && !(sii_wri_ecc4_l1_cycle9 == sii_l2b1_ecc[4]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc4_l1_wri_cycle9
*/

wire sii_wri_ecc5_l1_cycle9 =  (`TOP.cpu.sii_l2t1_req[26] ^ `TOP.cpu.sii_l2t1_req[27] ^ `TOP.cpu.sii_l2t1_req[28] ^ `TOP.cpu.sii_l2t1_req[29] ^ `TOP.cpu.sii_l2t1_req[30] ^ `TOP.cpu.sii_l2t1_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t1_req_vld,10))) && ($0in_delay(sii_l2t1_req[24] == 0,10)) && ($0in_delay(sii_l2t1_req[25] == 0,10)) && ($0in_delay(sii_l2t1_req[26] == 1,10)) && ($0in_rising_edge($0in_delay(l2t1_sii_iq_dequeue,10))) && !(sii_wri_ecc5_l1_cycle9 == sii_l2b1_ecc[5]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc5_l1_wri_cycle9
*/

wire sii_wri_ecc6_l1_cycle9 =  (`TOP.cpu.sii_l2t1_req[0] ^ `TOP.cpu.sii_l2t1_req[1] ^ `TOP.cpu.sii_l2t1_req[2] ^ `TOP.cpu.sii_l2t1_req[4] ^ `TOP.cpu.sii_l2t1_req[5] ^ `TOP.cpu.sii_l2t1_req[7] ^ `TOP.cpu.sii_l2t1_req[10] ^ `TOP.cpu.sii_l2t1_req[11] ^ `TOP.cpu.sii_l2t1_req[12] ^ `TOP.cpu.sii_l2t1_req[14] ^ `TOP.cpu.sii_l2t1_req[17] ^ `TOP.cpu.sii_l2t1_req[18] ^ `TOP.cpu.sii_l2t1_req[21] ^ `TOP.cpu.sii_l2t1_req[23] ^ `TOP.cpu.sii_l2t1_req[24] ^ `TOP.cpu.sii_l2t1_req[26] ^ `TOP.cpu.sii_l2t1_req[27] ^ `TOP.cpu.sii_l2t1_req[29] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t1_req_vld,10))) && ($0in_delay(sii_l2t1_req[24] == 0,10)) && ($0in_delay(sii_l2t1_req[25] == 0,10)) && ($0in_delay(sii_l2t1_req[26] == 1,10)) && ($0in_rising_edge($0in_delay(l2t1_sii_iq_dequeue,10))) && !(sii_wri_ecc6_l1_cycle9 == sii_l2b1_ecc[6]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc6_l1_wri_cycle9
*/

wire sii_wri_ecc0_l1_cycle10 =  (`TOP.cpu.sii_l2t1_req[0] ^ `TOP.cpu.sii_l2t1_req[1] ^ `TOP.cpu.sii_l2t1_req[3] ^ `TOP.cpu.sii_l2t1_req[4] ^ `TOP.cpu.sii_l2t1_req[6] ^ `TOP.cpu.sii_l2t1_req[8] ^ `TOP.cpu.sii_l2t1_req[10] ^ `TOP.cpu.sii_l2t1_req[11] ^ `TOP.cpu.sii_l2t1_req[13] ^ `TOP.cpu.sii_l2t1_req[15] ^ `TOP.cpu.sii_l2t1_req[17] ^ `TOP.cpu.sii_l2t1_req[19] ^ `TOP.cpu.sii_l2t1_req[21] ^ `TOP.cpu.sii_l2t1_req[23] ^ `TOP.cpu.sii_l2t1_req[25] ^ `TOP.cpu.sii_l2t1_req[26] ^ `TOP.cpu.sii_l2t1_req[28] ^ `TOP.cpu.sii_l2t1_req[30] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t1_req_vld,11))) && ($0in_delay(sii_l2t1_req[24] == 0,11)) && ($0in_delay(sii_l2t1_req[25] == 0,11)) && ($0in_delay(sii_l2t1_req[26] == 1,11)) && ($0in_rising_edge($0in_delay(l2t1_sii_iq_dequeue,11))) && !(sii_wri_ecc0_l1_cycle10 == sii_l2b1_ecc[0]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc0_l1_wri_cycle10
*/

wire sii_wri_ecc1_l1_cycle10 =  (`TOP.cpu.sii_l2t1_req[0] ^ `TOP.cpu.sii_l2t1_req[2] ^ `TOP.cpu.sii_l2t1_req[3] ^ `TOP.cpu.sii_l2t1_req[5] ^ `TOP.cpu.sii_l2t1_req[6] ^ `TOP.cpu.sii_l2t1_req[9] ^ `TOP.cpu.sii_l2t1_req[10] ^ `TOP.cpu.sii_l2t1_req[12] ^ `TOP.cpu.sii_l2t1_req[13] ^ `TOP.cpu.sii_l2t1_req[16] ^ `TOP.cpu.sii_l2t1_req[17] ^ `TOP.cpu.sii_l2t1_req[20] ^ `TOP.cpu.sii_l2t1_req[21] ^ `TOP.cpu.sii_l2t1_req[24] ^ `TOP.cpu.sii_l2t1_req[25] ^ `TOP.cpu.sii_l2t1_req[27] ^ `TOP.cpu.sii_l2t1_req[28] ^ `TOP.cpu.sii_l2t1_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t1_req_vld,11))) && ($0in_delay(sii_l2t1_req[24] == 0,11)) && ($0in_delay(sii_l2t1_req[25] == 0,11)) && ($0in_delay(sii_l2t1_req[26] == 1,11)) && ($0in_rising_edge($0in_delay(l2t1_sii_iq_dequeue,11))) && !(sii_wri_ecc1_l1_cycle10 == sii_l2b1_ecc[1]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc1_l1_wri_cycle10
*/

wire sii_wri_ecc2_l1_cycle10 =  (`TOP.cpu.sii_l2t1_req[1] ^ `TOP.cpu.sii_l2t1_req[2] ^ `TOP.cpu.sii_l2t1_req[3] ^ `TOP.cpu.sii_l2t1_req[7] ^ `TOP.cpu.sii_l2t1_req[8] ^ `TOP.cpu.sii_l2t1_req[9] ^ `TOP.cpu.sii_l2t1_req[10] ^ `TOP.cpu.sii_l2t1_req[14] ^ `TOP.cpu.sii_l2t1_req[15] ^ `TOP.cpu.sii_l2t1_req[16] ^ `TOP.cpu.sii_l2t1_req[17] ^ `TOP.cpu.sii_l2t1_req[22] ^ `TOP.cpu.sii_l2t1_req[23] ^ `TOP.cpu.sii_l2t1_req[24] ^ `TOP.cpu.sii_l2t1_req[25] ^ `TOP.cpu.sii_l2t1_req[29] ^ `TOP.cpu.sii_l2t1_req[30] ^ `TOP.cpu.sii_l2t1_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t1_req_vld,11))) && ($0in_delay(sii_l2t1_req[24] == 0,11)) && ($0in_delay(sii_l2t1_req[25] == 0,11)) && ($0in_delay(sii_l2t1_req[26] == 1,11)) && ($0in_rising_edge($0in_delay(l2t1_sii_iq_dequeue,11))) && !(sii_wri_ecc2_l1_cycle10 == sii_l2b1_ecc[2]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc2_l1_wri_cycle10
*/

wire sii_wri_ecc3_l1_cycle10 =  (`TOP.cpu.sii_l2t1_req[4] ^ `TOP.cpu.sii_l2t1_req[5] ^ `TOP.cpu.sii_l2t1_req[6] ^ `TOP.cpu.sii_l2t1_req[7] ^ `TOP.cpu.sii_l2t1_req[8] ^ `TOP.cpu.sii_l2t1_req[9] ^ `TOP.cpu.sii_l2t1_req[10] ^ `TOP.cpu.sii_l2t1_req[18] ^ `TOP.cpu.sii_l2t1_req[19] ^ `TOP.cpu.sii_l2t1_req[20] ^ `TOP.cpu.sii_l2t1_req[21] ^ `TOP.cpu.sii_l2t1_req[22] ^ `TOP.cpu.sii_l2t1_req[23] ^ `TOP.cpu.sii_l2t1_req[24] ^ `TOP.cpu.sii_l2t1_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t1_req_vld,11))) && ($0in_delay(sii_l2t1_req[24] == 0,11)) && ($0in_delay(sii_l2t1_req[25] == 0,11)) && ($0in_delay(sii_l2t1_req[26] == 1,11)) && ($0in_rising_edge($0in_delay(l2t1_sii_iq_dequeue,11))) && !(sii_wri_ecc3_l1_cycle10 == sii_l2b1_ecc[3]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc3_l1_wri_cycle10
*/

wire sii_wri_ecc4_l1_cycle10 =  ( `TOP.cpu.sii_l2t1_req[11] ^ `TOP.cpu.sii_l2t1_req[12] ^ `TOP.cpu.sii_l2t1_req[13] ^ `TOP.cpu.sii_l2t1_req[14] ^ `TOP.cpu.sii_l2t1_req[15] ^ `TOP.cpu.sii_l2t1_req[16] ^ `TOP.cpu.sii_l2t1_req[17] ^ `TOP.cpu.sii_l2t1_req[18] ^ `TOP.cpu.sii_l2t1_req[19] ^ `TOP.cpu.sii_l2t1_req[20] ^ `TOP.cpu.sii_l2t1_req[21] ^ `TOP.cpu.sii_l2t1_req[22] ^ `TOP.cpu.sii_l2t1_req[23] ^ `TOP.cpu.sii_l2t1_req[24] ^ `TOP.cpu.sii_l2t1_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t1_req_vld,11))) && ($0in_delay(sii_l2t1_req[24] == 0,11)) && ($0in_delay(sii_l2t1_req[25] == 0,11)) && ($0in_delay(sii_l2t1_req[26] == 1,11)) && ($0in_rising_edge($0in_delay(l2t1_sii_iq_dequeue,11))) && !(sii_wri_ecc4_l1_cycle10 == sii_l2b1_ecc[4]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc4_l1_wri_cycle10
*/

wire sii_wri_ecc5_l1_cycle10 =  (`TOP.cpu.sii_l2t1_req[26] ^ `TOP.cpu.sii_l2t1_req[27] ^ `TOP.cpu.sii_l2t1_req[28] ^ `TOP.cpu.sii_l2t1_req[29] ^ `TOP.cpu.sii_l2t1_req[30] ^ `TOP.cpu.sii_l2t1_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t1_req_vld,11))) && ($0in_delay(sii_l2t1_req[24] == 0,11)) && ($0in_delay(sii_l2t1_req[25] == 0,11)) && ($0in_delay(sii_l2t1_req[26] == 1,11)) && ($0in_rising_edge($0in_delay(l2t1_sii_iq_dequeue,11))) && !(sii_wri_ecc5_l1_cycle10 == sii_l2b1_ecc[5]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc5_l1_wri_cycle10
*/

wire sii_wri_ecc6_l1_cycle10 =  (`TOP.cpu.sii_l2t1_req[0] ^ `TOP.cpu.sii_l2t1_req[1] ^ `TOP.cpu.sii_l2t1_req[2] ^ `TOP.cpu.sii_l2t1_req[4] ^ `TOP.cpu.sii_l2t1_req[5] ^ `TOP.cpu.sii_l2t1_req[7] ^ `TOP.cpu.sii_l2t1_req[10] ^ `TOP.cpu.sii_l2t1_req[11] ^ `TOP.cpu.sii_l2t1_req[12] ^ `TOP.cpu.sii_l2t1_req[14] ^ `TOP.cpu.sii_l2t1_req[17] ^ `TOP.cpu.sii_l2t1_req[18] ^ `TOP.cpu.sii_l2t1_req[21] ^ `TOP.cpu.sii_l2t1_req[23] ^ `TOP.cpu.sii_l2t1_req[24] ^ `TOP.cpu.sii_l2t1_req[26] ^ `TOP.cpu.sii_l2t1_req[27] ^ `TOP.cpu.sii_l2t1_req[29] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t1_req_vld,11))) && ($0in_delay(sii_l2t1_req[24] == 0,11)) && ($0in_delay(sii_l2t1_req[25] == 0,11)) && ($0in_delay(sii_l2t1_req[26] == 1,11)) && ($0in_rising_edge($0in_delay(l2t1_sii_iq_dequeue,11))) && !(sii_wri_ecc6_l1_cycle10 == sii_l2b1_ecc[6]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc6_l1_wri_cycle10
*/

wire sii_wri_ecc0_l1_cycle11 =  (`TOP.cpu.sii_l2t1_req[0] ^ `TOP.cpu.sii_l2t1_req[1] ^ `TOP.cpu.sii_l2t1_req[3] ^ `TOP.cpu.sii_l2t1_req[4] ^ `TOP.cpu.sii_l2t1_req[6] ^ `TOP.cpu.sii_l2t1_req[8] ^ `TOP.cpu.sii_l2t1_req[10] ^ `TOP.cpu.sii_l2t1_req[11] ^ `TOP.cpu.sii_l2t1_req[13] ^ `TOP.cpu.sii_l2t1_req[15] ^ `TOP.cpu.sii_l2t1_req[17] ^ `TOP.cpu.sii_l2t1_req[19] ^ `TOP.cpu.sii_l2t1_req[21] ^ `TOP.cpu.sii_l2t1_req[23] ^ `TOP.cpu.sii_l2t1_req[25] ^ `TOP.cpu.sii_l2t1_req[26] ^ `TOP.cpu.sii_l2t1_req[28] ^ `TOP.cpu.sii_l2t1_req[30] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t1_req_vld,12))) && ($0in_delay(sii_l2t1_req[24] == 0,12)) && ($0in_delay(sii_l2t1_req[25] == 0,12)) && ($0in_delay(sii_l2t1_req[26] == 1,12)) && ($0in_rising_edge($0in_delay(l2t1_sii_iq_dequeue,12))) && !(sii_wri_ecc0_l1_cycle11 == sii_l2b1_ecc[0]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc0_l1_wri_cycle11
*/

wire sii_wri_ecc1_l1_cycle11 =  (`TOP.cpu.sii_l2t1_req[0] ^ `TOP.cpu.sii_l2t1_req[2] ^ `TOP.cpu.sii_l2t1_req[3] ^ `TOP.cpu.sii_l2t1_req[5] ^ `TOP.cpu.sii_l2t1_req[6] ^ `TOP.cpu.sii_l2t1_req[9] ^ `TOP.cpu.sii_l2t1_req[10] ^ `TOP.cpu.sii_l2t1_req[12] ^ `TOP.cpu.sii_l2t1_req[13] ^ `TOP.cpu.sii_l2t1_req[16] ^ `TOP.cpu.sii_l2t1_req[17] ^ `TOP.cpu.sii_l2t1_req[20] ^ `TOP.cpu.sii_l2t1_req[21] ^ `TOP.cpu.sii_l2t1_req[24] ^ `TOP.cpu.sii_l2t1_req[25] ^ `TOP.cpu.sii_l2t1_req[27] ^ `TOP.cpu.sii_l2t1_req[28] ^ `TOP.cpu.sii_l2t1_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t1_req_vld,12))) && ($0in_delay(sii_l2t1_req[24] == 0,12)) && ($0in_delay(sii_l2t1_req[25] == 0,12)) && ($0in_delay(sii_l2t1_req[26] == 1,12)) && ($0in_rising_edge($0in_delay(l2t1_sii_iq_dequeue,12))) && !(sii_wri_ecc1_l1_cycle11 == sii_l2b1_ecc[1]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc1_l1_wri_cycle11
*/

wire sii_wri_ecc2_l1_cycle11 =  (`TOP.cpu.sii_l2t1_req[1] ^ `TOP.cpu.sii_l2t1_req[2] ^ `TOP.cpu.sii_l2t1_req[3] ^ `TOP.cpu.sii_l2t1_req[7] ^ `TOP.cpu.sii_l2t1_req[8] ^ `TOP.cpu.sii_l2t1_req[9] ^ `TOP.cpu.sii_l2t1_req[10] ^ `TOP.cpu.sii_l2t1_req[14] ^ `TOP.cpu.sii_l2t1_req[15] ^ `TOP.cpu.sii_l2t1_req[16] ^ `TOP.cpu.sii_l2t1_req[17] ^ `TOP.cpu.sii_l2t1_req[22] ^ `TOP.cpu.sii_l2t1_req[23] ^ `TOP.cpu.sii_l2t1_req[24] ^ `TOP.cpu.sii_l2t1_req[25] ^ `TOP.cpu.sii_l2t1_req[29] ^ `TOP.cpu.sii_l2t1_req[30] ^ `TOP.cpu.sii_l2t1_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t1_req_vld,12))) && ($0in_delay(sii_l2t1_req[24] == 0,12)) && ($0in_delay(sii_l2t1_req[25] == 0,12)) && ($0in_delay(sii_l2t1_req[26] == 1,12)) && ($0in_rising_edge($0in_delay(l2t1_sii_iq_dequeue,12))) && !(sii_wri_ecc2_l1_cycle11 == sii_l2b1_ecc[2]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc2_l1_wri_cycle11
*/

wire sii_wri_ecc3_l1_cycle11 =  (`TOP.cpu.sii_l2t1_req[4] ^ `TOP.cpu.sii_l2t1_req[5] ^ `TOP.cpu.sii_l2t1_req[6] ^ `TOP.cpu.sii_l2t1_req[7] ^ `TOP.cpu.sii_l2t1_req[8] ^ `TOP.cpu.sii_l2t1_req[9] ^ `TOP.cpu.sii_l2t1_req[10] ^ `TOP.cpu.sii_l2t1_req[18] ^ `TOP.cpu.sii_l2t1_req[19] ^ `TOP.cpu.sii_l2t1_req[20] ^ `TOP.cpu.sii_l2t1_req[21] ^ `TOP.cpu.sii_l2t1_req[22] ^ `TOP.cpu.sii_l2t1_req[23] ^ `TOP.cpu.sii_l2t1_req[24] ^ `TOP.cpu.sii_l2t1_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t1_req_vld,12))) && ($0in_delay(sii_l2t1_req[24] == 0,12)) && ($0in_delay(sii_l2t1_req[25] == 0,12)) && ($0in_delay(sii_l2t1_req[26] == 1,12)) && ($0in_rising_edge($0in_delay(l2t1_sii_iq_dequeue,12))) && !(sii_wri_ecc3_l1_cycle11 == sii_l2b1_ecc[3]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc3_l1_wri_cycle11
*/

wire sii_wri_ecc4_l1_cycle11 =  ( `TOP.cpu.sii_l2t1_req[11] ^ `TOP.cpu.sii_l2t1_req[12] ^ `TOP.cpu.sii_l2t1_req[13] ^ `TOP.cpu.sii_l2t1_req[14] ^ `TOP.cpu.sii_l2t1_req[15] ^ `TOP.cpu.sii_l2t1_req[16] ^ `TOP.cpu.sii_l2t1_req[17] ^ `TOP.cpu.sii_l2t1_req[18] ^ `TOP.cpu.sii_l2t1_req[19] ^ `TOP.cpu.sii_l2t1_req[20] ^ `TOP.cpu.sii_l2t1_req[21] ^ `TOP.cpu.sii_l2t1_req[22] ^ `TOP.cpu.sii_l2t1_req[23] ^ `TOP.cpu.sii_l2t1_req[24] ^ `TOP.cpu.sii_l2t1_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t1_req_vld,12))) && ($0in_delay(sii_l2t1_req[24] == 0,12)) && ($0in_delay(sii_l2t1_req[25] == 0,12)) && ($0in_delay(sii_l2t1_req[26] == 1,12)) && ($0in_rising_edge($0in_delay(l2t1_sii_iq_dequeue,12))) && !(sii_wri_ecc4_l1_cycle11 == sii_l2b1_ecc[4]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc4_l1_wri_cycle11
*/

wire sii_wri_ecc5_l1_cycle11 =  (`TOP.cpu.sii_l2t1_req[26] ^ `TOP.cpu.sii_l2t1_req[27] ^ `TOP.cpu.sii_l2t1_req[28] ^ `TOP.cpu.sii_l2t1_req[29] ^ `TOP.cpu.sii_l2t1_req[30] ^ `TOP.cpu.sii_l2t1_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t1_req_vld,12))) && ($0in_delay(sii_l2t1_req[24] == 0,12)) && ($0in_delay(sii_l2t1_req[25] == 0,12)) && ($0in_delay(sii_l2t1_req[26] == 1,12)) && ($0in_rising_edge($0in_delay(l2t1_sii_iq_dequeue,12))) && !(sii_wri_ecc5_l1_cycle11 == sii_l2b1_ecc[5]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc5_l1_wri_cycle11
*/

wire sii_wri_ecc6_l1_cycle11 =  (`TOP.cpu.sii_l2t1_req[0] ^ `TOP.cpu.sii_l2t1_req[1] ^ `TOP.cpu.sii_l2t1_req[2] ^ `TOP.cpu.sii_l2t1_req[4] ^ `TOP.cpu.sii_l2t1_req[5] ^ `TOP.cpu.sii_l2t1_req[7] ^ `TOP.cpu.sii_l2t1_req[10] ^ `TOP.cpu.sii_l2t1_req[11] ^ `TOP.cpu.sii_l2t1_req[12] ^ `TOP.cpu.sii_l2t1_req[14] ^ `TOP.cpu.sii_l2t1_req[17] ^ `TOP.cpu.sii_l2t1_req[18] ^ `TOP.cpu.sii_l2t1_req[21] ^ `TOP.cpu.sii_l2t1_req[23] ^ `TOP.cpu.sii_l2t1_req[24] ^ `TOP.cpu.sii_l2t1_req[26] ^ `TOP.cpu.sii_l2t1_req[27] ^ `TOP.cpu.sii_l2t1_req[29] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t1_req_vld,12))) && ($0in_delay(sii_l2t1_req[24] == 0,12)) && ($0in_delay(sii_l2t1_req[25] == 0,12)) && ($0in_delay(sii_l2t1_req[26] == 1,12)) && ($0in_rising_edge($0in_delay(l2t1_sii_iq_dequeue,12))) && !(sii_wri_ecc6_l1_cycle11 == sii_l2b1_ecc[6]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc6_l1_wri_cycle11
*/

wire sii_wri_ecc0_l1_cycle12 =  (`TOP.cpu.sii_l2t1_req[0] ^ `TOP.cpu.sii_l2t1_req[1] ^ `TOP.cpu.sii_l2t1_req[3] ^ `TOP.cpu.sii_l2t1_req[4] ^ `TOP.cpu.sii_l2t1_req[6] ^ `TOP.cpu.sii_l2t1_req[8] ^ `TOP.cpu.sii_l2t1_req[10] ^ `TOP.cpu.sii_l2t1_req[11] ^ `TOP.cpu.sii_l2t1_req[13] ^ `TOP.cpu.sii_l2t1_req[15] ^ `TOP.cpu.sii_l2t1_req[17] ^ `TOP.cpu.sii_l2t1_req[19] ^ `TOP.cpu.sii_l2t1_req[21] ^ `TOP.cpu.sii_l2t1_req[23] ^ `TOP.cpu.sii_l2t1_req[25] ^ `TOP.cpu.sii_l2t1_req[26] ^ `TOP.cpu.sii_l2t1_req[28] ^ `TOP.cpu.sii_l2t1_req[30] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t1_req_vld,13))) && ($0in_delay(sii_l2t1_req[24] == 0,13)) && ($0in_delay(sii_l2t1_req[25] == 0,13)) && ($0in_delay(sii_l2t1_req[26] == 1,13)) && ($0in_rising_edge($0in_delay(l2t1_sii_iq_dequeue,13))) && !(sii_wri_ecc0_l1_cycle12 == sii_l2b1_ecc[0]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc0_l1_wri_cycle12
*/

wire sii_wri_ecc1_l1_cycle12 =  (`TOP.cpu.sii_l2t1_req[0] ^ `TOP.cpu.sii_l2t1_req[2] ^ `TOP.cpu.sii_l2t1_req[3] ^ `TOP.cpu.sii_l2t1_req[5] ^ `TOP.cpu.sii_l2t1_req[6] ^ `TOP.cpu.sii_l2t1_req[9] ^ `TOP.cpu.sii_l2t1_req[10] ^ `TOP.cpu.sii_l2t1_req[12] ^ `TOP.cpu.sii_l2t1_req[13] ^ `TOP.cpu.sii_l2t1_req[16] ^ `TOP.cpu.sii_l2t1_req[17] ^ `TOP.cpu.sii_l2t1_req[20] ^ `TOP.cpu.sii_l2t1_req[21] ^ `TOP.cpu.sii_l2t1_req[24] ^ `TOP.cpu.sii_l2t1_req[25] ^ `TOP.cpu.sii_l2t1_req[27] ^ `TOP.cpu.sii_l2t1_req[28] ^ `TOP.cpu.sii_l2t1_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t1_req_vld,13))) && ($0in_delay(sii_l2t1_req[24] == 0,13)) && ($0in_delay(sii_l2t1_req[25] == 0,13)) && ($0in_delay(sii_l2t1_req[26] == 1,13)) && ($0in_rising_edge($0in_delay(l2t1_sii_iq_dequeue,13))) && !(sii_wri_ecc1_l1_cycle12 == sii_l2b1_ecc[1]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc1_l1_wri_cycle12
*/

wire sii_wri_ecc2_l1_cycle12 =  (`TOP.cpu.sii_l2t1_req[1] ^ `TOP.cpu.sii_l2t1_req[2] ^ `TOP.cpu.sii_l2t1_req[3] ^ `TOP.cpu.sii_l2t1_req[7] ^ `TOP.cpu.sii_l2t1_req[8] ^ `TOP.cpu.sii_l2t1_req[9] ^ `TOP.cpu.sii_l2t1_req[10] ^ `TOP.cpu.sii_l2t1_req[14] ^ `TOP.cpu.sii_l2t1_req[15] ^ `TOP.cpu.sii_l2t1_req[16] ^ `TOP.cpu.sii_l2t1_req[17] ^ `TOP.cpu.sii_l2t1_req[22] ^ `TOP.cpu.sii_l2t1_req[23] ^ `TOP.cpu.sii_l2t1_req[24] ^ `TOP.cpu.sii_l2t1_req[25] ^ `TOP.cpu.sii_l2t1_req[29] ^ `TOP.cpu.sii_l2t1_req[30] ^ `TOP.cpu.sii_l2t1_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t1_req_vld,13))) && ($0in_delay(sii_l2t1_req[24] == 0,13)) && ($0in_delay(sii_l2t1_req[25] == 0,13)) && ($0in_delay(sii_l2t1_req[26] == 1,13)) && ($0in_rising_edge($0in_delay(l2t1_sii_iq_dequeue,13))) && !(sii_wri_ecc2_l1_cycle12 == sii_l2b1_ecc[2]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc2_l1_wri_cycle12
*/

wire sii_wri_ecc3_l1_cycle12 =  (`TOP.cpu.sii_l2t1_req[4] ^ `TOP.cpu.sii_l2t1_req[5] ^ `TOP.cpu.sii_l2t1_req[6] ^ `TOP.cpu.sii_l2t1_req[7] ^ `TOP.cpu.sii_l2t1_req[8] ^ `TOP.cpu.sii_l2t1_req[9] ^ `TOP.cpu.sii_l2t1_req[10] ^ `TOP.cpu.sii_l2t1_req[18] ^ `TOP.cpu.sii_l2t1_req[19] ^ `TOP.cpu.sii_l2t1_req[20] ^ `TOP.cpu.sii_l2t1_req[21] ^ `TOP.cpu.sii_l2t1_req[22] ^ `TOP.cpu.sii_l2t1_req[23] ^ `TOP.cpu.sii_l2t1_req[24] ^ `TOP.cpu.sii_l2t1_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t1_req_vld,13))) && ($0in_delay(sii_l2t1_req[24] == 0,13)) && ($0in_delay(sii_l2t1_req[25] == 0,13)) && ($0in_delay(sii_l2t1_req[26] == 1,13)) && ($0in_rising_edge($0in_delay(l2t1_sii_iq_dequeue,13))) && !(sii_wri_ecc3_l1_cycle12 == sii_l2b1_ecc[3]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc3_l1_wri_cycle12
*/

wire sii_wri_ecc4_l1_cycle12 =  ( `TOP.cpu.sii_l2t1_req[11] ^ `TOP.cpu.sii_l2t1_req[12] ^ `TOP.cpu.sii_l2t1_req[13] ^ `TOP.cpu.sii_l2t1_req[14] ^ `TOP.cpu.sii_l2t1_req[15] ^ `TOP.cpu.sii_l2t1_req[16] ^ `TOP.cpu.sii_l2t1_req[17] ^ `TOP.cpu.sii_l2t1_req[18] ^ `TOP.cpu.sii_l2t1_req[19] ^ `TOP.cpu.sii_l2t1_req[20] ^ `TOP.cpu.sii_l2t1_req[21] ^ `TOP.cpu.sii_l2t1_req[22] ^ `TOP.cpu.sii_l2t1_req[23] ^ `TOP.cpu.sii_l2t1_req[24] ^ `TOP.cpu.sii_l2t1_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t1_req_vld,13))) && ($0in_delay(sii_l2t1_req[24] == 0,13)) && ($0in_delay(sii_l2t1_req[25] == 0,13)) && ($0in_delay(sii_l2t1_req[26] == 1,13)) && ($0in_rising_edge($0in_delay(l2t1_sii_iq_dequeue,13))) && !(sii_wri_ecc4_l1_cycle12 == sii_l2b1_ecc[4]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc4_l1_wri_cycle12
*/

wire sii_wri_ecc5_l1_cycle12 =  (`TOP.cpu.sii_l2t1_req[26] ^ `TOP.cpu.sii_l2t1_req[27] ^ `TOP.cpu.sii_l2t1_req[28] ^ `TOP.cpu.sii_l2t1_req[29] ^ `TOP.cpu.sii_l2t1_req[30] ^ `TOP.cpu.sii_l2t1_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t1_req_vld,13))) && ($0in_delay(sii_l2t1_req[24] == 0,13)) && ($0in_delay(sii_l2t1_req[25] == 0,13)) && ($0in_delay(sii_l2t1_req[26] == 1,13)) && ($0in_rising_edge($0in_delay(l2t1_sii_iq_dequeue,13))) && !(sii_wri_ecc5_l1_cycle12 == sii_l2b1_ecc[5]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc5_l1_wri_cycle12
*/

wire sii_wri_ecc6_l1_cycle12 =  (`TOP.cpu.sii_l2t1_req[0] ^ `TOP.cpu.sii_l2t1_req[1] ^ `TOP.cpu.sii_l2t1_req[2] ^ `TOP.cpu.sii_l2t1_req[4] ^ `TOP.cpu.sii_l2t1_req[5] ^ `TOP.cpu.sii_l2t1_req[7] ^ `TOP.cpu.sii_l2t1_req[10] ^ `TOP.cpu.sii_l2t1_req[11] ^ `TOP.cpu.sii_l2t1_req[12] ^ `TOP.cpu.sii_l2t1_req[14] ^ `TOP.cpu.sii_l2t1_req[17] ^ `TOP.cpu.sii_l2t1_req[18] ^ `TOP.cpu.sii_l2t1_req[21] ^ `TOP.cpu.sii_l2t1_req[23] ^ `TOP.cpu.sii_l2t1_req[24] ^ `TOP.cpu.sii_l2t1_req[26] ^ `TOP.cpu.sii_l2t1_req[27] ^ `TOP.cpu.sii_l2t1_req[29] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t1_req_vld,13))) && ($0in_delay(sii_l2t1_req[24] == 0,13)) && ($0in_delay(sii_l2t1_req[25] == 0,13)) && ($0in_delay(sii_l2t1_req[26] == 1,13)) && ($0in_rising_edge($0in_delay(l2t1_sii_iq_dequeue,13))) && !(sii_wri_ecc6_l1_cycle12 == sii_l2b1_ecc[6]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc6_l1_wri_cycle12
*/

wire sii_wri_ecc0_l1_cycle13 =  (`TOP.cpu.sii_l2t1_req[0] ^ `TOP.cpu.sii_l2t1_req[1] ^ `TOP.cpu.sii_l2t1_req[3] ^ `TOP.cpu.sii_l2t1_req[4] ^ `TOP.cpu.sii_l2t1_req[6] ^ `TOP.cpu.sii_l2t1_req[8] ^ `TOP.cpu.sii_l2t1_req[10] ^ `TOP.cpu.sii_l2t1_req[11] ^ `TOP.cpu.sii_l2t1_req[13] ^ `TOP.cpu.sii_l2t1_req[15] ^ `TOP.cpu.sii_l2t1_req[17] ^ `TOP.cpu.sii_l2t1_req[19] ^ `TOP.cpu.sii_l2t1_req[21] ^ `TOP.cpu.sii_l2t1_req[23] ^ `TOP.cpu.sii_l2t1_req[25] ^ `TOP.cpu.sii_l2t1_req[26] ^ `TOP.cpu.sii_l2t1_req[28] ^ `TOP.cpu.sii_l2t1_req[30] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t1_req_vld,14))) && ($0in_delay(sii_l2t1_req[24] == 0,14)) && ($0in_delay(sii_l2t1_req[25] == 0,14)) && ($0in_delay(sii_l2t1_req[26] == 1,14)) && ($0in_rising_edge($0in_delay(l2t1_sii_iq_dequeue,14))) && !(sii_wri_ecc0_l1_cycle13 == sii_l2b1_ecc[0]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc0_l1_wri_cycle13
*/

wire sii_wri_ecc1_l1_cycle13 =  (`TOP.cpu.sii_l2t1_req[0] ^ `TOP.cpu.sii_l2t1_req[2] ^ `TOP.cpu.sii_l2t1_req[3] ^ `TOP.cpu.sii_l2t1_req[5] ^ `TOP.cpu.sii_l2t1_req[6] ^ `TOP.cpu.sii_l2t1_req[9] ^ `TOP.cpu.sii_l2t1_req[10] ^ `TOP.cpu.sii_l2t1_req[12] ^ `TOP.cpu.sii_l2t1_req[13] ^ `TOP.cpu.sii_l2t1_req[16] ^ `TOP.cpu.sii_l2t1_req[17] ^ `TOP.cpu.sii_l2t1_req[20] ^ `TOP.cpu.sii_l2t1_req[21] ^ `TOP.cpu.sii_l2t1_req[24] ^ `TOP.cpu.sii_l2t1_req[25] ^ `TOP.cpu.sii_l2t1_req[27] ^ `TOP.cpu.sii_l2t1_req[28] ^ `TOP.cpu.sii_l2t1_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t1_req_vld,14))) && ($0in_delay(sii_l2t1_req[24] == 0,14)) && ($0in_delay(sii_l2t1_req[25] == 0,14)) && ($0in_delay(sii_l2t1_req[26] == 1,14)) && ($0in_rising_edge($0in_delay(l2t1_sii_iq_dequeue,14))) && !(sii_wri_ecc1_l1_cycle13 == sii_l2b1_ecc[1]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc1_l1_wri_cycle13
*/

wire sii_wri_ecc2_l1_cycle13 =  (`TOP.cpu.sii_l2t1_req[1] ^ `TOP.cpu.sii_l2t1_req[2] ^ `TOP.cpu.sii_l2t1_req[3] ^ `TOP.cpu.sii_l2t1_req[7] ^ `TOP.cpu.sii_l2t1_req[8] ^ `TOP.cpu.sii_l2t1_req[9] ^ `TOP.cpu.sii_l2t1_req[10] ^ `TOP.cpu.sii_l2t1_req[14] ^ `TOP.cpu.sii_l2t1_req[15] ^ `TOP.cpu.sii_l2t1_req[16] ^ `TOP.cpu.sii_l2t1_req[17] ^ `TOP.cpu.sii_l2t1_req[22] ^ `TOP.cpu.sii_l2t1_req[23] ^ `TOP.cpu.sii_l2t1_req[24] ^ `TOP.cpu.sii_l2t1_req[25] ^ `TOP.cpu.sii_l2t1_req[29] ^ `TOP.cpu.sii_l2t1_req[30] ^ `TOP.cpu.sii_l2t1_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t1_req_vld,14))) && ($0in_delay(sii_l2t1_req[24] == 0,14)) && ($0in_delay(sii_l2t1_req[25] == 0,14)) && ($0in_delay(sii_l2t1_req[26] == 1,14)) && ($0in_rising_edge($0in_delay(l2t1_sii_iq_dequeue,14))) && !(sii_wri_ecc2_l1_cycle13 == sii_l2b1_ecc[2]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc2_l1_wri_cycle13
*/

wire sii_wri_ecc3_l1_cycle13 =  (`TOP.cpu.sii_l2t1_req[4] ^ `TOP.cpu.sii_l2t1_req[5] ^ `TOP.cpu.sii_l2t1_req[6] ^ `TOP.cpu.sii_l2t1_req[7] ^ `TOP.cpu.sii_l2t1_req[8] ^ `TOP.cpu.sii_l2t1_req[9] ^ `TOP.cpu.sii_l2t1_req[10] ^ `TOP.cpu.sii_l2t1_req[18] ^ `TOP.cpu.sii_l2t1_req[19] ^ `TOP.cpu.sii_l2t1_req[20] ^ `TOP.cpu.sii_l2t1_req[21] ^ `TOP.cpu.sii_l2t1_req[22] ^ `TOP.cpu.sii_l2t1_req[23] ^ `TOP.cpu.sii_l2t1_req[24] ^ `TOP.cpu.sii_l2t1_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t1_req_vld,14))) && ($0in_delay(sii_l2t1_req[24] == 0,14)) && ($0in_delay(sii_l2t1_req[25] == 0,14)) && ($0in_delay(sii_l2t1_req[26] == 1,14)) && ($0in_rising_edge($0in_delay(l2t1_sii_iq_dequeue,14))) && !(sii_wri_ecc3_l1_cycle13 == sii_l2b1_ecc[3]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc3_l1_wri_cycle13
*/

wire sii_wri_ecc4_l1_cycle13 =  ( `TOP.cpu.sii_l2t1_req[11] ^ `TOP.cpu.sii_l2t1_req[12] ^ `TOP.cpu.sii_l2t1_req[13] ^ `TOP.cpu.sii_l2t1_req[14] ^ `TOP.cpu.sii_l2t1_req[15] ^ `TOP.cpu.sii_l2t1_req[16] ^ `TOP.cpu.sii_l2t1_req[17] ^ `TOP.cpu.sii_l2t1_req[18] ^ `TOP.cpu.sii_l2t1_req[19] ^ `TOP.cpu.sii_l2t1_req[20] ^ `TOP.cpu.sii_l2t1_req[21] ^ `TOP.cpu.sii_l2t1_req[22] ^ `TOP.cpu.sii_l2t1_req[23] ^ `TOP.cpu.sii_l2t1_req[24] ^ `TOP.cpu.sii_l2t1_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t1_req_vld,14))) && ($0in_delay(sii_l2t1_req[24] == 0,14)) && ($0in_delay(sii_l2t1_req[25] == 0,14)) && ($0in_delay(sii_l2t1_req[26] == 1,14)) && ($0in_rising_edge($0in_delay(l2t1_sii_iq_dequeue,14))) && !(sii_wri_ecc4_l1_cycle13 == sii_l2b1_ecc[4]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc4_l1_wri_cycle13
*/

wire sii_wri_ecc5_l1_cycle13 =  (`TOP.cpu.sii_l2t1_req[26] ^ `TOP.cpu.sii_l2t1_req[27] ^ `TOP.cpu.sii_l2t1_req[28] ^ `TOP.cpu.sii_l2t1_req[29] ^ `TOP.cpu.sii_l2t1_req[30] ^ `TOP.cpu.sii_l2t1_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t1_req_vld,14))) && ($0in_delay(sii_l2t1_req[24] == 0,14)) && ($0in_delay(sii_l2t1_req[25] == 0,14)) && ($0in_delay(sii_l2t1_req[26] == 1,14)) && ($0in_rising_edge($0in_delay(l2t1_sii_iq_dequeue,14))) && !(sii_wri_ecc5_l1_cycle13 == sii_l2b1_ecc[5]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc5_l1_wri_cycle13
*/

wire sii_wri_ecc6_l1_cycle13 =  (`TOP.cpu.sii_l2t1_req[0] ^ `TOP.cpu.sii_l2t1_req[1] ^ `TOP.cpu.sii_l2t1_req[2] ^ `TOP.cpu.sii_l2t1_req[4] ^ `TOP.cpu.sii_l2t1_req[5] ^ `TOP.cpu.sii_l2t1_req[7] ^ `TOP.cpu.sii_l2t1_req[10] ^ `TOP.cpu.sii_l2t1_req[11] ^ `TOP.cpu.sii_l2t1_req[12] ^ `TOP.cpu.sii_l2t1_req[14] ^ `TOP.cpu.sii_l2t1_req[17] ^ `TOP.cpu.sii_l2t1_req[18] ^ `TOP.cpu.sii_l2t1_req[21] ^ `TOP.cpu.sii_l2t1_req[23] ^ `TOP.cpu.sii_l2t1_req[24] ^ `TOP.cpu.sii_l2t1_req[26] ^ `TOP.cpu.sii_l2t1_req[27] ^ `TOP.cpu.sii_l2t1_req[29] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t1_req_vld,14))) && ($0in_delay(sii_l2t1_req[24] == 0,14)) && ($0in_delay(sii_l2t1_req[25] == 0,14)) && ($0in_delay(sii_l2t1_req[26] == 1,14)) && ($0in_rising_edge($0in_delay(l2t1_sii_iq_dequeue,14))) && !(sii_wri_ecc6_l1_cycle13 == sii_l2b1_ecc[6]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc6_l1_wri_cycle13
*/

wire sii_wri_ecc0_l1_cycle14 =  (`TOP.cpu.sii_l2t1_req[0] ^ `TOP.cpu.sii_l2t1_req[1] ^ `TOP.cpu.sii_l2t1_req[3] ^ `TOP.cpu.sii_l2t1_req[4] ^ `TOP.cpu.sii_l2t1_req[6] ^ `TOP.cpu.sii_l2t1_req[8] ^ `TOP.cpu.sii_l2t1_req[10] ^ `TOP.cpu.sii_l2t1_req[11] ^ `TOP.cpu.sii_l2t1_req[13] ^ `TOP.cpu.sii_l2t1_req[15] ^ `TOP.cpu.sii_l2t1_req[17] ^ `TOP.cpu.sii_l2t1_req[19] ^ `TOP.cpu.sii_l2t1_req[21] ^ `TOP.cpu.sii_l2t1_req[23] ^ `TOP.cpu.sii_l2t1_req[25] ^ `TOP.cpu.sii_l2t1_req[26] ^ `TOP.cpu.sii_l2t1_req[28] ^ `TOP.cpu.sii_l2t1_req[30] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t1_req_vld,15))) && ($0in_delay(sii_l2t1_req[24] == 0,15)) && ($0in_delay(sii_l2t1_req[25] == 0,15)) && ($0in_delay(sii_l2t1_req[26] == 1,15)) && ($0in_rising_edge($0in_delay(l2t1_sii_iq_dequeue,15))) && !(sii_wri_ecc0_l1_cycle14 == sii_l2b1_ecc[0]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc0_l1_wri_cycle14
*/

wire sii_wri_ecc1_l1_cycle14 =  (`TOP.cpu.sii_l2t1_req[0] ^ `TOP.cpu.sii_l2t1_req[2] ^ `TOP.cpu.sii_l2t1_req[3] ^ `TOP.cpu.sii_l2t1_req[5] ^ `TOP.cpu.sii_l2t1_req[6] ^ `TOP.cpu.sii_l2t1_req[9] ^ `TOP.cpu.sii_l2t1_req[10] ^ `TOP.cpu.sii_l2t1_req[12] ^ `TOP.cpu.sii_l2t1_req[13] ^ `TOP.cpu.sii_l2t1_req[16] ^ `TOP.cpu.sii_l2t1_req[17] ^ `TOP.cpu.sii_l2t1_req[20] ^ `TOP.cpu.sii_l2t1_req[21] ^ `TOP.cpu.sii_l2t1_req[24] ^ `TOP.cpu.sii_l2t1_req[25] ^ `TOP.cpu.sii_l2t1_req[27] ^ `TOP.cpu.sii_l2t1_req[28] ^ `TOP.cpu.sii_l2t1_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t1_req_vld,15))) && ($0in_delay(sii_l2t1_req[24] == 0,15)) && ($0in_delay(sii_l2t1_req[25] == 0,15)) && ($0in_delay(sii_l2t1_req[26] == 1,15)) && ($0in_rising_edge($0in_delay(l2t1_sii_iq_dequeue,15))) && !(sii_wri_ecc1_l1_cycle14 == sii_l2b1_ecc[1]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc1_l1_wri_cycle14
*/

wire sii_wri_ecc2_l1_cycle14 =  (`TOP.cpu.sii_l2t1_req[1] ^ `TOP.cpu.sii_l2t1_req[2] ^ `TOP.cpu.sii_l2t1_req[3] ^ `TOP.cpu.sii_l2t1_req[7] ^ `TOP.cpu.sii_l2t1_req[8] ^ `TOP.cpu.sii_l2t1_req[9] ^ `TOP.cpu.sii_l2t1_req[10] ^ `TOP.cpu.sii_l2t1_req[14] ^ `TOP.cpu.sii_l2t1_req[15] ^ `TOP.cpu.sii_l2t1_req[16] ^ `TOP.cpu.sii_l2t1_req[17] ^ `TOP.cpu.sii_l2t1_req[22] ^ `TOP.cpu.sii_l2t1_req[23] ^ `TOP.cpu.sii_l2t1_req[24] ^ `TOP.cpu.sii_l2t1_req[25] ^ `TOP.cpu.sii_l2t1_req[29] ^ `TOP.cpu.sii_l2t1_req[30] ^ `TOP.cpu.sii_l2t1_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t1_req_vld,15))) && ($0in_delay(sii_l2t1_req[24] == 0,15)) && ($0in_delay(sii_l2t1_req[25] == 0,15)) && ($0in_delay(sii_l2t1_req[26] == 1,15)) && ($0in_rising_edge($0in_delay(l2t1_sii_iq_dequeue,15))) && !(sii_wri_ecc2_l1_cycle14 == sii_l2b1_ecc[2]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc2_l1_wri_cycle14
*/

wire sii_wri_ecc3_l1_cycle14 =  (`TOP.cpu.sii_l2t1_req[4] ^ `TOP.cpu.sii_l2t1_req[5] ^ `TOP.cpu.sii_l2t1_req[6] ^ `TOP.cpu.sii_l2t1_req[7] ^ `TOP.cpu.sii_l2t1_req[8] ^ `TOP.cpu.sii_l2t1_req[9] ^ `TOP.cpu.sii_l2t1_req[10] ^ `TOP.cpu.sii_l2t1_req[18] ^ `TOP.cpu.sii_l2t1_req[19] ^ `TOP.cpu.sii_l2t1_req[20] ^ `TOP.cpu.sii_l2t1_req[21] ^ `TOP.cpu.sii_l2t1_req[22] ^ `TOP.cpu.sii_l2t1_req[23] ^ `TOP.cpu.sii_l2t1_req[24] ^ `TOP.cpu.sii_l2t1_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t1_req_vld,15))) && ($0in_delay(sii_l2t1_req[24] == 0,15)) && ($0in_delay(sii_l2t1_req[25] == 0,15)) && ($0in_delay(sii_l2t1_req[26] == 1,15)) && ($0in_rising_edge($0in_delay(l2t1_sii_iq_dequeue,15))) && !(sii_wri_ecc3_l1_cycle14 == sii_l2b1_ecc[3]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc3_l1_wri_cycle14
*/

wire sii_wri_ecc4_l1_cycle14 =  ( `TOP.cpu.sii_l2t1_req[11] ^ `TOP.cpu.sii_l2t1_req[12] ^ `TOP.cpu.sii_l2t1_req[13] ^ `TOP.cpu.sii_l2t1_req[14] ^ `TOP.cpu.sii_l2t1_req[15] ^ `TOP.cpu.sii_l2t1_req[16] ^ `TOP.cpu.sii_l2t1_req[17] ^ `TOP.cpu.sii_l2t1_req[18] ^ `TOP.cpu.sii_l2t1_req[19] ^ `TOP.cpu.sii_l2t1_req[20] ^ `TOP.cpu.sii_l2t1_req[21] ^ `TOP.cpu.sii_l2t1_req[22] ^ `TOP.cpu.sii_l2t1_req[23] ^ `TOP.cpu.sii_l2t1_req[24] ^ `TOP.cpu.sii_l2t1_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t1_req_vld,15))) && ($0in_delay(sii_l2t1_req[24] == 0,15)) && ($0in_delay(sii_l2t1_req[25] == 0,15)) && ($0in_delay(sii_l2t1_req[26] == 1,15)) && ($0in_rising_edge($0in_delay(l2t1_sii_iq_dequeue,15))) && !(sii_wri_ecc4_l1_cycle14 == sii_l2b1_ecc[4]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc4_l1_wri_cycle14
*/

wire sii_wri_ecc5_l1_cycle14 =  (`TOP.cpu.sii_l2t1_req[26] ^ `TOP.cpu.sii_l2t1_req[27] ^ `TOP.cpu.sii_l2t1_req[28] ^ `TOP.cpu.sii_l2t1_req[29] ^ `TOP.cpu.sii_l2t1_req[30] ^ `TOP.cpu.sii_l2t1_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t1_req_vld,15))) && ($0in_delay(sii_l2t1_req[24] == 0,15)) && ($0in_delay(sii_l2t1_req[25] == 0,15)) && ($0in_delay(sii_l2t1_req[26] == 1,15)) && ($0in_rising_edge($0in_delay(l2t1_sii_iq_dequeue,15))) && !(sii_wri_ecc5_l1_cycle14 == sii_l2b1_ecc[5]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc5_l1_wri_cycle14
*/

wire sii_wri_ecc6_l1_cycle14 =  (`TOP.cpu.sii_l2t1_req[0] ^ `TOP.cpu.sii_l2t1_req[1] ^ `TOP.cpu.sii_l2t1_req[2] ^ `TOP.cpu.sii_l2t1_req[4] ^ `TOP.cpu.sii_l2t1_req[5] ^ `TOP.cpu.sii_l2t1_req[7] ^ `TOP.cpu.sii_l2t1_req[10] ^ `TOP.cpu.sii_l2t1_req[11] ^ `TOP.cpu.sii_l2t1_req[12] ^ `TOP.cpu.sii_l2t1_req[14] ^ `TOP.cpu.sii_l2t1_req[17] ^ `TOP.cpu.sii_l2t1_req[18] ^ `TOP.cpu.sii_l2t1_req[21] ^ `TOP.cpu.sii_l2t1_req[23] ^ `TOP.cpu.sii_l2t1_req[24] ^ `TOP.cpu.sii_l2t1_req[26] ^ `TOP.cpu.sii_l2t1_req[27] ^ `TOP.cpu.sii_l2t1_req[29] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t1_req_vld,15))) && ($0in_delay(sii_l2t1_req[24] == 0,15)) && ($0in_delay(sii_l2t1_req[25] == 0,15)) && ($0in_delay(sii_l2t1_req[26] == 1,15)) && ($0in_rising_edge($0in_delay(l2t1_sii_iq_dequeue,15))) && !(sii_wri_ecc6_l1_cycle14 == sii_l2b1_ecc[6]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc6_l1_wri_cycle14
*/

wire sii_wri_ecc0_l1_cycle15 =  (`TOP.cpu.sii_l2t1_req[0] ^ `TOP.cpu.sii_l2t1_req[1] ^ `TOP.cpu.sii_l2t1_req[3] ^ `TOP.cpu.sii_l2t1_req[4] ^ `TOP.cpu.sii_l2t1_req[6] ^ `TOP.cpu.sii_l2t1_req[8] ^ `TOP.cpu.sii_l2t1_req[10] ^ `TOP.cpu.sii_l2t1_req[11] ^ `TOP.cpu.sii_l2t1_req[13] ^ `TOP.cpu.sii_l2t1_req[15] ^ `TOP.cpu.sii_l2t1_req[17] ^ `TOP.cpu.sii_l2t1_req[19] ^ `TOP.cpu.sii_l2t1_req[21] ^ `TOP.cpu.sii_l2t1_req[23] ^ `TOP.cpu.sii_l2t1_req[25] ^ `TOP.cpu.sii_l2t1_req[26] ^ `TOP.cpu.sii_l2t1_req[28] ^ `TOP.cpu.sii_l2t1_req[30] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t1_req_vld,16))) && ($0in_delay(sii_l2t1_req[24] == 0,16)) && ($0in_delay(sii_l2t1_req[25] == 0,16)) && ($0in_delay(sii_l2t1_req[26] == 1,16)) && ($0in_rising_edge($0in_delay(l2t1_sii_iq_dequeue,16))) && !(sii_wri_ecc0_l1_cycle15 == sii_l2b1_ecc[0]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc0_l1_wri_cycle15
*/

wire sii_wri_ecc1_l1_cycle15 =  (`TOP.cpu.sii_l2t1_req[0] ^ `TOP.cpu.sii_l2t1_req[2] ^ `TOP.cpu.sii_l2t1_req[3] ^ `TOP.cpu.sii_l2t1_req[5] ^ `TOP.cpu.sii_l2t1_req[6] ^ `TOP.cpu.sii_l2t1_req[9] ^ `TOP.cpu.sii_l2t1_req[10] ^ `TOP.cpu.sii_l2t1_req[12] ^ `TOP.cpu.sii_l2t1_req[13] ^ `TOP.cpu.sii_l2t1_req[16] ^ `TOP.cpu.sii_l2t1_req[17] ^ `TOP.cpu.sii_l2t1_req[20] ^ `TOP.cpu.sii_l2t1_req[21] ^ `TOP.cpu.sii_l2t1_req[24] ^ `TOP.cpu.sii_l2t1_req[25] ^ `TOP.cpu.sii_l2t1_req[27] ^ `TOP.cpu.sii_l2t1_req[28] ^ `TOP.cpu.sii_l2t1_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t1_req_vld,16))) && ($0in_delay(sii_l2t1_req[24] == 0,16)) && ($0in_delay(sii_l2t1_req[25] == 0,16)) && ($0in_delay(sii_l2t1_req[26] == 1,16)) && ($0in_rising_edge($0in_delay(l2t1_sii_iq_dequeue,16))) && !(sii_wri_ecc1_l1_cycle15 == sii_l2b1_ecc[1]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc1_l1_wri_cycle15
*/

wire sii_wri_ecc2_l1_cycle15 =  (`TOP.cpu.sii_l2t1_req[1] ^ `TOP.cpu.sii_l2t1_req[2] ^ `TOP.cpu.sii_l2t1_req[3] ^ `TOP.cpu.sii_l2t1_req[7] ^ `TOP.cpu.sii_l2t1_req[8] ^ `TOP.cpu.sii_l2t1_req[9] ^ `TOP.cpu.sii_l2t1_req[10] ^ `TOP.cpu.sii_l2t1_req[14] ^ `TOP.cpu.sii_l2t1_req[15] ^ `TOP.cpu.sii_l2t1_req[16] ^ `TOP.cpu.sii_l2t1_req[17] ^ `TOP.cpu.sii_l2t1_req[22] ^ `TOP.cpu.sii_l2t1_req[23] ^ `TOP.cpu.sii_l2t1_req[24] ^ `TOP.cpu.sii_l2t1_req[25] ^ `TOP.cpu.sii_l2t1_req[29] ^ `TOP.cpu.sii_l2t1_req[30] ^ `TOP.cpu.sii_l2t1_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t1_req_vld,16))) && ($0in_delay(sii_l2t1_req[24] == 0,16)) && ($0in_delay(sii_l2t1_req[25] == 0,16)) && ($0in_delay(sii_l2t1_req[26] == 1,16)) && ($0in_rising_edge($0in_delay(l2t1_sii_iq_dequeue,16))) && !(sii_wri_ecc2_l1_cycle15 == sii_l2b1_ecc[2]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc2_l1_wri_cycle15
*/

wire sii_wri_ecc3_l1_cycle15 =  (`TOP.cpu.sii_l2t1_req[4] ^ `TOP.cpu.sii_l2t1_req[5] ^ `TOP.cpu.sii_l2t1_req[6] ^ `TOP.cpu.sii_l2t1_req[7] ^ `TOP.cpu.sii_l2t1_req[8] ^ `TOP.cpu.sii_l2t1_req[9] ^ `TOP.cpu.sii_l2t1_req[10] ^ `TOP.cpu.sii_l2t1_req[18] ^ `TOP.cpu.sii_l2t1_req[19] ^ `TOP.cpu.sii_l2t1_req[20] ^ `TOP.cpu.sii_l2t1_req[21] ^ `TOP.cpu.sii_l2t1_req[22] ^ `TOP.cpu.sii_l2t1_req[23] ^ `TOP.cpu.sii_l2t1_req[24] ^ `TOP.cpu.sii_l2t1_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t1_req_vld,16))) && ($0in_delay(sii_l2t1_req[24] == 0,16)) && ($0in_delay(sii_l2t1_req[25] == 0,16)) && ($0in_delay(sii_l2t1_req[26] == 1,16)) && ($0in_rising_edge($0in_delay(l2t1_sii_iq_dequeue,16))) && !(sii_wri_ecc3_l1_cycle15 == sii_l2b1_ecc[3]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc3_l1_wri_cycle15
*/

wire sii_wri_ecc4_l1_cycle15 =  ( `TOP.cpu.sii_l2t1_req[11] ^ `TOP.cpu.sii_l2t1_req[12] ^ `TOP.cpu.sii_l2t1_req[13] ^ `TOP.cpu.sii_l2t1_req[14] ^ `TOP.cpu.sii_l2t1_req[15] ^ `TOP.cpu.sii_l2t1_req[16] ^ `TOP.cpu.sii_l2t1_req[17] ^ `TOP.cpu.sii_l2t1_req[18] ^ `TOP.cpu.sii_l2t1_req[19] ^ `TOP.cpu.sii_l2t1_req[20] ^ `TOP.cpu.sii_l2t1_req[21] ^ `TOP.cpu.sii_l2t1_req[22] ^ `TOP.cpu.sii_l2t1_req[23] ^ `TOP.cpu.sii_l2t1_req[24] ^ `TOP.cpu.sii_l2t1_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t1_req_vld,16))) && ($0in_delay(sii_l2t1_req[24] == 0,16)) && ($0in_delay(sii_l2t1_req[25] == 0,16)) && ($0in_delay(sii_l2t1_req[26] == 1,16)) && ($0in_rising_edge($0in_delay(l2t1_sii_iq_dequeue,16))) && !(sii_wri_ecc4_l1_cycle15 == sii_l2b1_ecc[4]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc4_l1_wri_cycle15
*/

wire sii_wri_ecc5_l1_cycle15 =  (`TOP.cpu.sii_l2t1_req[26] ^ `TOP.cpu.sii_l2t1_req[27] ^ `TOP.cpu.sii_l2t1_req[28] ^ `TOP.cpu.sii_l2t1_req[29] ^ `TOP.cpu.sii_l2t1_req[30] ^ `TOP.cpu.sii_l2t1_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t1_req_vld,16))) && ($0in_delay(sii_l2t1_req[24] == 0,16)) && ($0in_delay(sii_l2t1_req[25] == 0,16)) && ($0in_delay(sii_l2t1_req[26] == 1,16)) && ($0in_rising_edge($0in_delay(l2t1_sii_iq_dequeue,16))) && !(sii_wri_ecc5_l1_cycle15 == sii_l2b1_ecc[5]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc5_l1_wri_cycle15
*/

wire sii_wri_ecc6_l1_cycle15 =  (`TOP.cpu.sii_l2t1_req[0] ^ `TOP.cpu.sii_l2t1_req[1] ^ `TOP.cpu.sii_l2t1_req[2] ^ `TOP.cpu.sii_l2t1_req[4] ^ `TOP.cpu.sii_l2t1_req[5] ^ `TOP.cpu.sii_l2t1_req[7] ^ `TOP.cpu.sii_l2t1_req[10] ^ `TOP.cpu.sii_l2t1_req[11] ^ `TOP.cpu.sii_l2t1_req[12] ^ `TOP.cpu.sii_l2t1_req[14] ^ `TOP.cpu.sii_l2t1_req[17] ^ `TOP.cpu.sii_l2t1_req[18] ^ `TOP.cpu.sii_l2t1_req[21] ^ `TOP.cpu.sii_l2t1_req[23] ^ `TOP.cpu.sii_l2t1_req[24] ^ `TOP.cpu.sii_l2t1_req[26] ^ `TOP.cpu.sii_l2t1_req[27] ^ `TOP.cpu.sii_l2t1_req[29] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t1_req_vld,16))) && ($0in_delay(sii_l2t1_req[24] == 0,16)) && ($0in_delay(sii_l2t1_req[25] == 0,16)) && ($0in_delay(sii_l2t1_req[26] == 1,16)) && ($0in_rising_edge($0in_delay(l2t1_sii_iq_dequeue,16))) && !(sii_wri_ecc6_l1_cycle15 == sii_l2b1_ecc[6]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc6_l1_wri_cycle15
*/

wire sii_wri_ecc0_l1_cycle16 =  (`TOP.cpu.sii_l2t1_req[0] ^ `TOP.cpu.sii_l2t1_req[1] ^ `TOP.cpu.sii_l2t1_req[3] ^ `TOP.cpu.sii_l2t1_req[4] ^ `TOP.cpu.sii_l2t1_req[6] ^ `TOP.cpu.sii_l2t1_req[8] ^ `TOP.cpu.sii_l2t1_req[10] ^ `TOP.cpu.sii_l2t1_req[11] ^ `TOP.cpu.sii_l2t1_req[13] ^ `TOP.cpu.sii_l2t1_req[15] ^ `TOP.cpu.sii_l2t1_req[17] ^ `TOP.cpu.sii_l2t1_req[19] ^ `TOP.cpu.sii_l2t1_req[21] ^ `TOP.cpu.sii_l2t1_req[23] ^ `TOP.cpu.sii_l2t1_req[25] ^ `TOP.cpu.sii_l2t1_req[26] ^ `TOP.cpu.sii_l2t1_req[28] ^ `TOP.cpu.sii_l2t1_req[30] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t1_req_vld,17))) && ($0in_delay(sii_l2t1_req[24] == 0,17)) && ($0in_delay(sii_l2t1_req[25] == 0,17)) && ($0in_delay(sii_l2t1_req[26] == 1,17)) && ($0in_rising_edge($0in_delay(l2t1_sii_iq_dequeue,17))) && !(sii_wri_ecc0_l1_cycle16 == sii_l2b1_ecc[0]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc0_l1_wri_cycle16
*/

wire sii_wri_ecc1_l1_cycle16 =  (`TOP.cpu.sii_l2t1_req[0] ^ `TOP.cpu.sii_l2t1_req[2] ^ `TOP.cpu.sii_l2t1_req[3] ^ `TOP.cpu.sii_l2t1_req[5] ^ `TOP.cpu.sii_l2t1_req[6] ^ `TOP.cpu.sii_l2t1_req[9] ^ `TOP.cpu.sii_l2t1_req[10] ^ `TOP.cpu.sii_l2t1_req[12] ^ `TOP.cpu.sii_l2t1_req[13] ^ `TOP.cpu.sii_l2t1_req[16] ^ `TOP.cpu.sii_l2t1_req[17] ^ `TOP.cpu.sii_l2t1_req[20] ^ `TOP.cpu.sii_l2t1_req[21] ^ `TOP.cpu.sii_l2t1_req[24] ^ `TOP.cpu.sii_l2t1_req[25] ^ `TOP.cpu.sii_l2t1_req[27] ^ `TOP.cpu.sii_l2t1_req[28] ^ `TOP.cpu.sii_l2t1_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t1_req_vld,17))) && ($0in_delay(sii_l2t1_req[24] == 0,17)) && ($0in_delay(sii_l2t1_req[25] == 0,17)) && ($0in_delay(sii_l2t1_req[26] == 1,17)) && ($0in_rising_edge($0in_delay(l2t1_sii_iq_dequeue,17))) && !(sii_wri_ecc1_l1_cycle16 == sii_l2b1_ecc[1]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc1_l1_wri_cycle16
*/

wire sii_wri_ecc2_l1_cycle16 =  (`TOP.cpu.sii_l2t1_req[1] ^ `TOP.cpu.sii_l2t1_req[2] ^ `TOP.cpu.sii_l2t1_req[3] ^ `TOP.cpu.sii_l2t1_req[7] ^ `TOP.cpu.sii_l2t1_req[8] ^ `TOP.cpu.sii_l2t1_req[9] ^ `TOP.cpu.sii_l2t1_req[10] ^ `TOP.cpu.sii_l2t1_req[14] ^ `TOP.cpu.sii_l2t1_req[15] ^ `TOP.cpu.sii_l2t1_req[16] ^ `TOP.cpu.sii_l2t1_req[17] ^ `TOP.cpu.sii_l2t1_req[22] ^ `TOP.cpu.sii_l2t1_req[23] ^ `TOP.cpu.sii_l2t1_req[24] ^ `TOP.cpu.sii_l2t1_req[25] ^ `TOP.cpu.sii_l2t1_req[29] ^ `TOP.cpu.sii_l2t1_req[30] ^ `TOP.cpu.sii_l2t1_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t1_req_vld,17))) && ($0in_delay(sii_l2t1_req[24] == 0,17)) && ($0in_delay(sii_l2t1_req[25] == 0,17)) && ($0in_delay(sii_l2t1_req[26] == 1,17)) && ($0in_rising_edge($0in_delay(l2t1_sii_iq_dequeue,17))) && !(sii_wri_ecc2_l1_cycle16 == sii_l2b1_ecc[2]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc2_l1_wri_cycle16
*/

wire sii_wri_ecc3_l1_cycle16 =  (`TOP.cpu.sii_l2t1_req[4] ^ `TOP.cpu.sii_l2t1_req[5] ^ `TOP.cpu.sii_l2t1_req[6] ^ `TOP.cpu.sii_l2t1_req[7] ^ `TOP.cpu.sii_l2t1_req[8] ^ `TOP.cpu.sii_l2t1_req[9] ^ `TOP.cpu.sii_l2t1_req[10] ^ `TOP.cpu.sii_l2t1_req[18] ^ `TOP.cpu.sii_l2t1_req[19] ^ `TOP.cpu.sii_l2t1_req[20] ^ `TOP.cpu.sii_l2t1_req[21] ^ `TOP.cpu.sii_l2t1_req[22] ^ `TOP.cpu.sii_l2t1_req[23] ^ `TOP.cpu.sii_l2t1_req[24] ^ `TOP.cpu.sii_l2t1_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t1_req_vld,17))) && ($0in_delay(sii_l2t1_req[24] == 0,17)) && ($0in_delay(sii_l2t1_req[25] == 0,17)) && ($0in_delay(sii_l2t1_req[26] == 1,17)) && ($0in_rising_edge($0in_delay(l2t1_sii_iq_dequeue,17))) && !(sii_wri_ecc3_l1_cycle16 == sii_l2b1_ecc[3]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc3_l1_wri_cycle16
*/

wire sii_wri_ecc4_l1_cycle16 =  ( `TOP.cpu.sii_l2t1_req[11] ^ `TOP.cpu.sii_l2t1_req[12] ^ `TOP.cpu.sii_l2t1_req[13] ^ `TOP.cpu.sii_l2t1_req[14] ^ `TOP.cpu.sii_l2t1_req[15] ^ `TOP.cpu.sii_l2t1_req[16] ^ `TOP.cpu.sii_l2t1_req[17] ^ `TOP.cpu.sii_l2t1_req[18] ^ `TOP.cpu.sii_l2t1_req[19] ^ `TOP.cpu.sii_l2t1_req[20] ^ `TOP.cpu.sii_l2t1_req[21] ^ `TOP.cpu.sii_l2t1_req[22] ^ `TOP.cpu.sii_l2t1_req[23] ^ `TOP.cpu.sii_l2t1_req[24] ^ `TOP.cpu.sii_l2t1_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t1_req_vld,17))) && ($0in_delay(sii_l2t1_req[24] == 0,17)) && ($0in_delay(sii_l2t1_req[25] == 0,17)) && ($0in_delay(sii_l2t1_req[26] == 1,17)) && ($0in_rising_edge($0in_delay(l2t1_sii_iq_dequeue,17))) && !(sii_wri_ecc4_l1_cycle16 == sii_l2b1_ecc[4]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc4_l1_wri_cycle16
*/

wire sii_wri_ecc5_l1_cycle16 =  (`TOP.cpu.sii_l2t1_req[26] ^ `TOP.cpu.sii_l2t1_req[27] ^ `TOP.cpu.sii_l2t1_req[28] ^ `TOP.cpu.sii_l2t1_req[29] ^ `TOP.cpu.sii_l2t1_req[30] ^ `TOP.cpu.sii_l2t1_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t1_req_vld,17))) && ($0in_delay(sii_l2t1_req[24] == 0,17)) && ($0in_delay(sii_l2t1_req[25] == 0,17)) && ($0in_delay(sii_l2t1_req[26] == 1,17)) && ($0in_rising_edge($0in_delay(l2t1_sii_iq_dequeue,17))) && !(sii_wri_ecc5_l1_cycle16 == sii_l2b1_ecc[5]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc5_l1_wri_cycle16
*/

wire sii_wri_ecc6_l1_cycle16 =  (`TOP.cpu.sii_l2t1_req[0] ^ `TOP.cpu.sii_l2t1_req[1] ^ `TOP.cpu.sii_l2t1_req[2] ^ `TOP.cpu.sii_l2t1_req[4] ^ `TOP.cpu.sii_l2t1_req[5] ^ `TOP.cpu.sii_l2t1_req[7] ^ `TOP.cpu.sii_l2t1_req[10] ^ `TOP.cpu.sii_l2t1_req[11] ^ `TOP.cpu.sii_l2t1_req[12] ^ `TOP.cpu.sii_l2t1_req[14] ^ `TOP.cpu.sii_l2t1_req[17] ^ `TOP.cpu.sii_l2t1_req[18] ^ `TOP.cpu.sii_l2t1_req[21] ^ `TOP.cpu.sii_l2t1_req[23] ^ `TOP.cpu.sii_l2t1_req[24] ^ `TOP.cpu.sii_l2t1_req[26] ^ `TOP.cpu.sii_l2t1_req[27] ^ `TOP.cpu.sii_l2t1_req[29] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t1_req_vld,17))) && ($0in_delay(sii_l2t1_req[24] == 0,17)) && ($0in_delay(sii_l2t1_req[25] == 0,17)) && ($0in_delay(sii_l2t1_req[26] == 1,17)) && ($0in_rising_edge($0in_delay(l2t1_sii_iq_dequeue,17))) && !(sii_wri_ecc6_l1_cycle16 == sii_l2b1_ecc[6]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc6_l1_wri_cycle16
*/

wire sii_wri_ecc0_l2_cycle1 =  (`TOP.cpu.sii_l2t2_req[0] ^ `TOP.cpu.sii_l2t2_req[1] ^ `TOP.cpu.sii_l2t2_req[3] ^ `TOP.cpu.sii_l2t2_req[4] ^ `TOP.cpu.sii_l2t2_req[6] ^ `TOP.cpu.sii_l2t2_req[8] ^ `TOP.cpu.sii_l2t2_req[10] ^ `TOP.cpu.sii_l2t2_req[11] ^ `TOP.cpu.sii_l2t2_req[13] ^ `TOP.cpu.sii_l2t2_req[15] ^ `TOP.cpu.sii_l2t2_req[17] ^ `TOP.cpu.sii_l2t2_req[19] ^ `TOP.cpu.sii_l2t2_req[21] ^ `TOP.cpu.sii_l2t2_req[23] ^ `TOP.cpu.sii_l2t2_req[25] ^ `TOP.cpu.sii_l2t2_req[26] ^ `TOP.cpu.sii_l2t2_req[28] ^ `TOP.cpu.sii_l2t2_req[30] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t2_req_vld,2))) && ($0in_delay(sii_l2t2_req[24] == 0,2)) && ($0in_delay(sii_l2t2_req[25] == 0,2)) && ($0in_delay(sii_l2t2_req[26] == 1,2)) && ($0in_rising_edge($0in_delay(l2t2_sii_iq_dequeue,2))) && !(sii_wri_ecc0_l2_cycle1 == sii_l2b2_ecc[0]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc0_l2_wri_cycle1
*/

wire sii_wri_ecc1_l2_cycle1 =  (`TOP.cpu.sii_l2t2_req[0] ^ `TOP.cpu.sii_l2t2_req[2] ^ `TOP.cpu.sii_l2t2_req[3] ^ `TOP.cpu.sii_l2t2_req[5] ^ `TOP.cpu.sii_l2t2_req[6] ^ `TOP.cpu.sii_l2t2_req[9] ^ `TOP.cpu.sii_l2t2_req[10] ^ `TOP.cpu.sii_l2t2_req[12] ^ `TOP.cpu.sii_l2t2_req[13] ^ `TOP.cpu.sii_l2t2_req[16] ^ `TOP.cpu.sii_l2t2_req[17] ^ `TOP.cpu.sii_l2t2_req[20] ^ `TOP.cpu.sii_l2t2_req[21] ^ `TOP.cpu.sii_l2t2_req[24] ^ `TOP.cpu.sii_l2t2_req[25] ^ `TOP.cpu.sii_l2t2_req[27] ^ `TOP.cpu.sii_l2t2_req[28] ^ `TOP.cpu.sii_l2t2_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t2_req_vld,2))) && ($0in_delay(sii_l2t2_req[24] == 0,2)) && ($0in_delay(sii_l2t2_req[25] == 0,2)) && ($0in_delay(sii_l2t2_req[26] == 1,2)) && ($0in_rising_edge($0in_delay(l2t2_sii_iq_dequeue,2))) && !(sii_wri_ecc1_l2_cycle1 == sii_l2b2_ecc[1]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc1_l2_wri_cycle1
*/

wire sii_wri_ecc2_l2_cycle1 =  (`TOP.cpu.sii_l2t2_req[1] ^ `TOP.cpu.sii_l2t2_req[2] ^ `TOP.cpu.sii_l2t2_req[3] ^ `TOP.cpu.sii_l2t2_req[7] ^ `TOP.cpu.sii_l2t2_req[8] ^ `TOP.cpu.sii_l2t2_req[9] ^ `TOP.cpu.sii_l2t2_req[10] ^ `TOP.cpu.sii_l2t2_req[14] ^ `TOP.cpu.sii_l2t2_req[15] ^ `TOP.cpu.sii_l2t2_req[16] ^ `TOP.cpu.sii_l2t2_req[17] ^ `TOP.cpu.sii_l2t2_req[22] ^ `TOP.cpu.sii_l2t2_req[23] ^ `TOP.cpu.sii_l2t2_req[24] ^ `TOP.cpu.sii_l2t2_req[25] ^ `TOP.cpu.sii_l2t2_req[29] ^ `TOP.cpu.sii_l2t2_req[30] ^ `TOP.cpu.sii_l2t2_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t2_req_vld,2))) && ($0in_delay(sii_l2t2_req[24] == 0,2)) && ($0in_delay(sii_l2t2_req[25] == 0,2)) && ($0in_delay(sii_l2t2_req[26] == 1,2)) && ($0in_rising_edge($0in_delay(l2t2_sii_iq_dequeue,2))) && !(sii_wri_ecc2_l2_cycle1 == sii_l2b2_ecc[2]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc2_l2_wri_cycle1
*/

wire sii_wri_ecc3_l2_cycle1 =  (`TOP.cpu.sii_l2t2_req[4] ^ `TOP.cpu.sii_l2t2_req[5] ^ `TOP.cpu.sii_l2t2_req[6] ^ `TOP.cpu.sii_l2t2_req[7] ^ `TOP.cpu.sii_l2t2_req[8] ^ `TOP.cpu.sii_l2t2_req[9] ^ `TOP.cpu.sii_l2t2_req[10] ^ `TOP.cpu.sii_l2t2_req[18] ^ `TOP.cpu.sii_l2t2_req[19] ^ `TOP.cpu.sii_l2t2_req[20] ^ `TOP.cpu.sii_l2t2_req[21] ^ `TOP.cpu.sii_l2t2_req[22] ^ `TOP.cpu.sii_l2t2_req[23] ^ `TOP.cpu.sii_l2t2_req[24] ^ `TOP.cpu.sii_l2t2_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t2_req_vld,2))) && ($0in_delay(sii_l2t2_req[24] == 0,2)) && ($0in_delay(sii_l2t2_req[25] == 0,2)) && ($0in_delay(sii_l2t2_req[26] == 1,2)) && ($0in_rising_edge($0in_delay(l2t2_sii_iq_dequeue,2))) && !(sii_wri_ecc3_l2_cycle1 == sii_l2b2_ecc[3]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc3_l2_wri_cycle1
*/

wire sii_wri_ecc4_l2_cycle1 =  ( `TOP.cpu.sii_l2t2_req[11] ^ `TOP.cpu.sii_l2t2_req[12] ^ `TOP.cpu.sii_l2t2_req[13] ^ `TOP.cpu.sii_l2t2_req[14] ^ `TOP.cpu.sii_l2t2_req[15] ^ `TOP.cpu.sii_l2t2_req[16] ^ `TOP.cpu.sii_l2t2_req[17] ^ `TOP.cpu.sii_l2t2_req[18] ^ `TOP.cpu.sii_l2t2_req[19] ^ `TOP.cpu.sii_l2t2_req[20] ^ `TOP.cpu.sii_l2t2_req[21] ^ `TOP.cpu.sii_l2t2_req[22] ^ `TOP.cpu.sii_l2t2_req[23] ^ `TOP.cpu.sii_l2t2_req[24] ^ `TOP.cpu.sii_l2t2_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t2_req_vld,2))) && ($0in_delay(sii_l2t2_req[24] == 0,2)) && ($0in_delay(sii_l2t2_req[25] == 0,2)) && ($0in_delay(sii_l2t2_req[26] == 1,2)) && ($0in_rising_edge($0in_delay(l2t2_sii_iq_dequeue,2))) && !(sii_wri_ecc4_l2_cycle1 == sii_l2b2_ecc[4]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc4_l2_wri_cycle1
*/

wire sii_wri_ecc5_l2_cycle1 =  (`TOP.cpu.sii_l2t2_req[26] ^ `TOP.cpu.sii_l2t2_req[27] ^ `TOP.cpu.sii_l2t2_req[28] ^ `TOP.cpu.sii_l2t2_req[29] ^ `TOP.cpu.sii_l2t2_req[30] ^ `TOP.cpu.sii_l2t2_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t2_req_vld,2))) && ($0in_delay(sii_l2t2_req[24] == 0,2)) && ($0in_delay(sii_l2t2_req[25] == 0,2)) && ($0in_delay(sii_l2t2_req[26] == 1,2)) && ($0in_rising_edge($0in_delay(l2t2_sii_iq_dequeue,2))) && !(sii_wri_ecc5_l2_cycle1 == sii_l2b2_ecc[5]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc5_l2_wri_cycle1
*/

wire sii_wri_ecc6_l2_cycle1 =  (`TOP.cpu.sii_l2t2_req[0] ^ `TOP.cpu.sii_l2t2_req[1] ^ `TOP.cpu.sii_l2t2_req[2] ^ `TOP.cpu.sii_l2t2_req[4] ^ `TOP.cpu.sii_l2t2_req[5] ^ `TOP.cpu.sii_l2t2_req[7] ^ `TOP.cpu.sii_l2t2_req[10] ^ `TOP.cpu.sii_l2t2_req[11] ^ `TOP.cpu.sii_l2t2_req[12] ^ `TOP.cpu.sii_l2t2_req[14] ^ `TOP.cpu.sii_l2t2_req[17] ^ `TOP.cpu.sii_l2t2_req[18] ^ `TOP.cpu.sii_l2t2_req[21] ^ `TOP.cpu.sii_l2t2_req[23] ^ `TOP.cpu.sii_l2t2_req[24] ^ `TOP.cpu.sii_l2t2_req[26] ^ `TOP.cpu.sii_l2t2_req[27] ^ `TOP.cpu.sii_l2t2_req[29] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t2_req_vld,2))) && ($0in_delay(sii_l2t2_req[24] == 0,2)) && ($0in_delay(sii_l2t2_req[25] == 0,2)) && ($0in_delay(sii_l2t2_req[26] == 1,2)) && ($0in_rising_edge($0in_delay(l2t2_sii_iq_dequeue,2))) && !(sii_wri_ecc6_l2_cycle1 == sii_l2b2_ecc[6]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc6_l2_wri_cycle1
*/

wire sii_wri_ecc0_l2_cycle2 =  (`TOP.cpu.sii_l2t2_req[0] ^ `TOP.cpu.sii_l2t2_req[1] ^ `TOP.cpu.sii_l2t2_req[3] ^ `TOP.cpu.sii_l2t2_req[4] ^ `TOP.cpu.sii_l2t2_req[6] ^ `TOP.cpu.sii_l2t2_req[8] ^ `TOP.cpu.sii_l2t2_req[10] ^ `TOP.cpu.sii_l2t2_req[11] ^ `TOP.cpu.sii_l2t2_req[13] ^ `TOP.cpu.sii_l2t2_req[15] ^ `TOP.cpu.sii_l2t2_req[17] ^ `TOP.cpu.sii_l2t2_req[19] ^ `TOP.cpu.sii_l2t2_req[21] ^ `TOP.cpu.sii_l2t2_req[23] ^ `TOP.cpu.sii_l2t2_req[25] ^ `TOP.cpu.sii_l2t2_req[26] ^ `TOP.cpu.sii_l2t2_req[28] ^ `TOP.cpu.sii_l2t2_req[30] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t2_req_vld,3))) && ($0in_delay(sii_l2t2_req[24] == 0,3)) && ($0in_delay(sii_l2t2_req[25] == 0,3)) && ($0in_delay(sii_l2t2_req[26] == 1,3)) && ($0in_rising_edge($0in_delay(l2t2_sii_iq_dequeue,3))) && !(sii_wri_ecc0_l2_cycle2 == sii_l2b2_ecc[0]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc0_l2_wri_cycle2
*/

wire sii_wri_ecc1_l2_cycle2 =  (`TOP.cpu.sii_l2t2_req[0] ^ `TOP.cpu.sii_l2t2_req[2] ^ `TOP.cpu.sii_l2t2_req[3] ^ `TOP.cpu.sii_l2t2_req[5] ^ `TOP.cpu.sii_l2t2_req[6] ^ `TOP.cpu.sii_l2t2_req[9] ^ `TOP.cpu.sii_l2t2_req[10] ^ `TOP.cpu.sii_l2t2_req[12] ^ `TOP.cpu.sii_l2t2_req[13] ^ `TOP.cpu.sii_l2t2_req[16] ^ `TOP.cpu.sii_l2t2_req[17] ^ `TOP.cpu.sii_l2t2_req[20] ^ `TOP.cpu.sii_l2t2_req[21] ^ `TOP.cpu.sii_l2t2_req[24] ^ `TOP.cpu.sii_l2t2_req[25] ^ `TOP.cpu.sii_l2t2_req[27] ^ `TOP.cpu.sii_l2t2_req[28] ^ `TOP.cpu.sii_l2t2_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t2_req_vld,3))) && ($0in_delay(sii_l2t2_req[24] == 0,3)) && ($0in_delay(sii_l2t2_req[25] == 0,3)) && ($0in_delay(sii_l2t2_req[26] == 1,3)) && ($0in_rising_edge($0in_delay(l2t2_sii_iq_dequeue,3))) && !(sii_wri_ecc1_l2_cycle2 == sii_l2b2_ecc[1]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc1_l2_wri_cycle2
*/

wire sii_wri_ecc2_l2_cycle2 =  (`TOP.cpu.sii_l2t2_req[1] ^ `TOP.cpu.sii_l2t2_req[2] ^ `TOP.cpu.sii_l2t2_req[3] ^ `TOP.cpu.sii_l2t2_req[7] ^ `TOP.cpu.sii_l2t2_req[8] ^ `TOP.cpu.sii_l2t2_req[9] ^ `TOP.cpu.sii_l2t2_req[10] ^ `TOP.cpu.sii_l2t2_req[14] ^ `TOP.cpu.sii_l2t2_req[15] ^ `TOP.cpu.sii_l2t2_req[16] ^ `TOP.cpu.sii_l2t2_req[17] ^ `TOP.cpu.sii_l2t2_req[22] ^ `TOP.cpu.sii_l2t2_req[23] ^ `TOP.cpu.sii_l2t2_req[24] ^ `TOP.cpu.sii_l2t2_req[25] ^ `TOP.cpu.sii_l2t2_req[29] ^ `TOP.cpu.sii_l2t2_req[30] ^ `TOP.cpu.sii_l2t2_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t2_req_vld,3))) && ($0in_delay(sii_l2t2_req[24] == 0,3)) && ($0in_delay(sii_l2t2_req[25] == 0,3)) && ($0in_delay(sii_l2t2_req[26] == 1,3)) && ($0in_rising_edge($0in_delay(l2t2_sii_iq_dequeue,3))) && !(sii_wri_ecc2_l2_cycle2 == sii_l2b2_ecc[2]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc2_l2_wri_cycle2
*/

wire sii_wri_ecc3_l2_cycle2 =  (`TOP.cpu.sii_l2t2_req[4] ^ `TOP.cpu.sii_l2t2_req[5] ^ `TOP.cpu.sii_l2t2_req[6] ^ `TOP.cpu.sii_l2t2_req[7] ^ `TOP.cpu.sii_l2t2_req[8] ^ `TOP.cpu.sii_l2t2_req[9] ^ `TOP.cpu.sii_l2t2_req[10] ^ `TOP.cpu.sii_l2t2_req[18] ^ `TOP.cpu.sii_l2t2_req[19] ^ `TOP.cpu.sii_l2t2_req[20] ^ `TOP.cpu.sii_l2t2_req[21] ^ `TOP.cpu.sii_l2t2_req[22] ^ `TOP.cpu.sii_l2t2_req[23] ^ `TOP.cpu.sii_l2t2_req[24] ^ `TOP.cpu.sii_l2t2_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t2_req_vld,3))) && ($0in_delay(sii_l2t2_req[24] == 0,3)) && ($0in_delay(sii_l2t2_req[25] == 0,3)) && ($0in_delay(sii_l2t2_req[26] == 1,3)) && ($0in_rising_edge($0in_delay(l2t2_sii_iq_dequeue,3))) && !(sii_wri_ecc3_l2_cycle2 == sii_l2b2_ecc[3]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc3_l2_wri_cycle2
*/

wire sii_wri_ecc4_l2_cycle2 =  ( `TOP.cpu.sii_l2t2_req[11] ^ `TOP.cpu.sii_l2t2_req[12] ^ `TOP.cpu.sii_l2t2_req[13] ^ `TOP.cpu.sii_l2t2_req[14] ^ `TOP.cpu.sii_l2t2_req[15] ^ `TOP.cpu.sii_l2t2_req[16] ^ `TOP.cpu.sii_l2t2_req[17] ^ `TOP.cpu.sii_l2t2_req[18] ^ `TOP.cpu.sii_l2t2_req[19] ^ `TOP.cpu.sii_l2t2_req[20] ^ `TOP.cpu.sii_l2t2_req[21] ^ `TOP.cpu.sii_l2t2_req[22] ^ `TOP.cpu.sii_l2t2_req[23] ^ `TOP.cpu.sii_l2t2_req[24] ^ `TOP.cpu.sii_l2t2_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t2_req_vld,3))) && ($0in_delay(sii_l2t2_req[24] == 0,3)) && ($0in_delay(sii_l2t2_req[25] == 0,3)) && ($0in_delay(sii_l2t2_req[26] == 1,3)) && ($0in_rising_edge($0in_delay(l2t2_sii_iq_dequeue,3))) && !(sii_wri_ecc4_l2_cycle2 == sii_l2b2_ecc[4]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc4_l2_wri_cycle2
*/

wire sii_wri_ecc5_l2_cycle2 =  (`TOP.cpu.sii_l2t2_req[26] ^ `TOP.cpu.sii_l2t2_req[27] ^ `TOP.cpu.sii_l2t2_req[28] ^ `TOP.cpu.sii_l2t2_req[29] ^ `TOP.cpu.sii_l2t2_req[30] ^ `TOP.cpu.sii_l2t2_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t2_req_vld,3))) && ($0in_delay(sii_l2t2_req[24] == 0,3)) && ($0in_delay(sii_l2t2_req[25] == 0,3)) && ($0in_delay(sii_l2t2_req[26] == 1,3)) && ($0in_rising_edge($0in_delay(l2t2_sii_iq_dequeue,3))) && !(sii_wri_ecc5_l2_cycle2 == sii_l2b2_ecc[5]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc5_l2_wri_cycle2
*/

wire sii_wri_ecc6_l2_cycle2 =  (`TOP.cpu.sii_l2t2_req[0] ^ `TOP.cpu.sii_l2t2_req[1] ^ `TOP.cpu.sii_l2t2_req[2] ^ `TOP.cpu.sii_l2t2_req[4] ^ `TOP.cpu.sii_l2t2_req[5] ^ `TOP.cpu.sii_l2t2_req[7] ^ `TOP.cpu.sii_l2t2_req[10] ^ `TOP.cpu.sii_l2t2_req[11] ^ `TOP.cpu.sii_l2t2_req[12] ^ `TOP.cpu.sii_l2t2_req[14] ^ `TOP.cpu.sii_l2t2_req[17] ^ `TOP.cpu.sii_l2t2_req[18] ^ `TOP.cpu.sii_l2t2_req[21] ^ `TOP.cpu.sii_l2t2_req[23] ^ `TOP.cpu.sii_l2t2_req[24] ^ `TOP.cpu.sii_l2t2_req[26] ^ `TOP.cpu.sii_l2t2_req[27] ^ `TOP.cpu.sii_l2t2_req[29] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t2_req_vld,3))) && ($0in_delay(sii_l2t2_req[24] == 0,3)) && ($0in_delay(sii_l2t2_req[25] == 0,3)) && ($0in_delay(sii_l2t2_req[26] == 1,3)) && ($0in_rising_edge($0in_delay(l2t2_sii_iq_dequeue,3))) && !(sii_wri_ecc6_l2_cycle2 == sii_l2b2_ecc[6]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc6_l2_wri_cycle2
*/

wire sii_wri_ecc0_l2_cycle3 =  (`TOP.cpu.sii_l2t2_req[0] ^ `TOP.cpu.sii_l2t2_req[1] ^ `TOP.cpu.sii_l2t2_req[3] ^ `TOP.cpu.sii_l2t2_req[4] ^ `TOP.cpu.sii_l2t2_req[6] ^ `TOP.cpu.sii_l2t2_req[8] ^ `TOP.cpu.sii_l2t2_req[10] ^ `TOP.cpu.sii_l2t2_req[11] ^ `TOP.cpu.sii_l2t2_req[13] ^ `TOP.cpu.sii_l2t2_req[15] ^ `TOP.cpu.sii_l2t2_req[17] ^ `TOP.cpu.sii_l2t2_req[19] ^ `TOP.cpu.sii_l2t2_req[21] ^ `TOP.cpu.sii_l2t2_req[23] ^ `TOP.cpu.sii_l2t2_req[25] ^ `TOP.cpu.sii_l2t2_req[26] ^ `TOP.cpu.sii_l2t2_req[28] ^ `TOP.cpu.sii_l2t2_req[30] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t2_req_vld,4))) && ($0in_delay(sii_l2t2_req[24] == 0,4)) && ($0in_delay(sii_l2t2_req[25] == 0,4)) && ($0in_delay(sii_l2t2_req[26] == 1,4)) && ($0in_rising_edge($0in_delay(l2t2_sii_iq_dequeue,4))) && !(sii_wri_ecc0_l2_cycle3 == sii_l2b2_ecc[0]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc0_l2_wri_cycle3
*/

wire sii_wri_ecc1_l2_cycle3 =  (`TOP.cpu.sii_l2t2_req[0] ^ `TOP.cpu.sii_l2t2_req[2] ^ `TOP.cpu.sii_l2t2_req[3] ^ `TOP.cpu.sii_l2t2_req[5] ^ `TOP.cpu.sii_l2t2_req[6] ^ `TOP.cpu.sii_l2t2_req[9] ^ `TOP.cpu.sii_l2t2_req[10] ^ `TOP.cpu.sii_l2t2_req[12] ^ `TOP.cpu.sii_l2t2_req[13] ^ `TOP.cpu.sii_l2t2_req[16] ^ `TOP.cpu.sii_l2t2_req[17] ^ `TOP.cpu.sii_l2t2_req[20] ^ `TOP.cpu.sii_l2t2_req[21] ^ `TOP.cpu.sii_l2t2_req[24] ^ `TOP.cpu.sii_l2t2_req[25] ^ `TOP.cpu.sii_l2t2_req[27] ^ `TOP.cpu.sii_l2t2_req[28] ^ `TOP.cpu.sii_l2t2_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t2_req_vld,4))) && ($0in_delay(sii_l2t2_req[24] == 0,4)) && ($0in_delay(sii_l2t2_req[25] == 0,4)) && ($0in_delay(sii_l2t2_req[26] == 1,4)) && ($0in_rising_edge($0in_delay(l2t2_sii_iq_dequeue,4))) && !(sii_wri_ecc1_l2_cycle3 == sii_l2b2_ecc[1]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc1_l2_wri_cycle3
*/

wire sii_wri_ecc2_l2_cycle3 =  (`TOP.cpu.sii_l2t2_req[1] ^ `TOP.cpu.sii_l2t2_req[2] ^ `TOP.cpu.sii_l2t2_req[3] ^ `TOP.cpu.sii_l2t2_req[7] ^ `TOP.cpu.sii_l2t2_req[8] ^ `TOP.cpu.sii_l2t2_req[9] ^ `TOP.cpu.sii_l2t2_req[10] ^ `TOP.cpu.sii_l2t2_req[14] ^ `TOP.cpu.sii_l2t2_req[15] ^ `TOP.cpu.sii_l2t2_req[16] ^ `TOP.cpu.sii_l2t2_req[17] ^ `TOP.cpu.sii_l2t2_req[22] ^ `TOP.cpu.sii_l2t2_req[23] ^ `TOP.cpu.sii_l2t2_req[24] ^ `TOP.cpu.sii_l2t2_req[25] ^ `TOP.cpu.sii_l2t2_req[29] ^ `TOP.cpu.sii_l2t2_req[30] ^ `TOP.cpu.sii_l2t2_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t2_req_vld,4))) && ($0in_delay(sii_l2t2_req[24] == 0,4)) && ($0in_delay(sii_l2t2_req[25] == 0,4)) && ($0in_delay(sii_l2t2_req[26] == 1,4)) && ($0in_rising_edge($0in_delay(l2t2_sii_iq_dequeue,4))) && !(sii_wri_ecc2_l2_cycle3 == sii_l2b2_ecc[2]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc2_l2_wri_cycle3
*/

wire sii_wri_ecc3_l2_cycle3 =  (`TOP.cpu.sii_l2t2_req[4] ^ `TOP.cpu.sii_l2t2_req[5] ^ `TOP.cpu.sii_l2t2_req[6] ^ `TOP.cpu.sii_l2t2_req[7] ^ `TOP.cpu.sii_l2t2_req[8] ^ `TOP.cpu.sii_l2t2_req[9] ^ `TOP.cpu.sii_l2t2_req[10] ^ `TOP.cpu.sii_l2t2_req[18] ^ `TOP.cpu.sii_l2t2_req[19] ^ `TOP.cpu.sii_l2t2_req[20] ^ `TOP.cpu.sii_l2t2_req[21] ^ `TOP.cpu.sii_l2t2_req[22] ^ `TOP.cpu.sii_l2t2_req[23] ^ `TOP.cpu.sii_l2t2_req[24] ^ `TOP.cpu.sii_l2t2_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t2_req_vld,4))) && ($0in_delay(sii_l2t2_req[24] == 0,4)) && ($0in_delay(sii_l2t2_req[25] == 0,4)) && ($0in_delay(sii_l2t2_req[26] == 1,4)) && ($0in_rising_edge($0in_delay(l2t2_sii_iq_dequeue,4))) && !(sii_wri_ecc3_l2_cycle3 == sii_l2b2_ecc[3]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc3_l2_wri_cycle3
*/

wire sii_wri_ecc4_l2_cycle3 =  ( `TOP.cpu.sii_l2t2_req[11] ^ `TOP.cpu.sii_l2t2_req[12] ^ `TOP.cpu.sii_l2t2_req[13] ^ `TOP.cpu.sii_l2t2_req[14] ^ `TOP.cpu.sii_l2t2_req[15] ^ `TOP.cpu.sii_l2t2_req[16] ^ `TOP.cpu.sii_l2t2_req[17] ^ `TOP.cpu.sii_l2t2_req[18] ^ `TOP.cpu.sii_l2t2_req[19] ^ `TOP.cpu.sii_l2t2_req[20] ^ `TOP.cpu.sii_l2t2_req[21] ^ `TOP.cpu.sii_l2t2_req[22] ^ `TOP.cpu.sii_l2t2_req[23] ^ `TOP.cpu.sii_l2t2_req[24] ^ `TOP.cpu.sii_l2t2_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t2_req_vld,4))) && ($0in_delay(sii_l2t2_req[24] == 0,4)) && ($0in_delay(sii_l2t2_req[25] == 0,4)) && ($0in_delay(sii_l2t2_req[26] == 1,4)) && ($0in_rising_edge($0in_delay(l2t2_sii_iq_dequeue,4))) && !(sii_wri_ecc4_l2_cycle3 == sii_l2b2_ecc[4]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc4_l2_wri_cycle3
*/

wire sii_wri_ecc5_l2_cycle3 =  (`TOP.cpu.sii_l2t2_req[26] ^ `TOP.cpu.sii_l2t2_req[27] ^ `TOP.cpu.sii_l2t2_req[28] ^ `TOP.cpu.sii_l2t2_req[29] ^ `TOP.cpu.sii_l2t2_req[30] ^ `TOP.cpu.sii_l2t2_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t2_req_vld,4))) && ($0in_delay(sii_l2t2_req[24] == 0,4)) && ($0in_delay(sii_l2t2_req[25] == 0,4)) && ($0in_delay(sii_l2t2_req[26] == 1,4)) && ($0in_rising_edge($0in_delay(l2t2_sii_iq_dequeue,4))) && !(sii_wri_ecc5_l2_cycle3 == sii_l2b2_ecc[5]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc5_l2_wri_cycle3
*/

wire sii_wri_ecc6_l2_cycle3 =  (`TOP.cpu.sii_l2t2_req[0] ^ `TOP.cpu.sii_l2t2_req[1] ^ `TOP.cpu.sii_l2t2_req[2] ^ `TOP.cpu.sii_l2t2_req[4] ^ `TOP.cpu.sii_l2t2_req[5] ^ `TOP.cpu.sii_l2t2_req[7] ^ `TOP.cpu.sii_l2t2_req[10] ^ `TOP.cpu.sii_l2t2_req[11] ^ `TOP.cpu.sii_l2t2_req[12] ^ `TOP.cpu.sii_l2t2_req[14] ^ `TOP.cpu.sii_l2t2_req[17] ^ `TOP.cpu.sii_l2t2_req[18] ^ `TOP.cpu.sii_l2t2_req[21] ^ `TOP.cpu.sii_l2t2_req[23] ^ `TOP.cpu.sii_l2t2_req[24] ^ `TOP.cpu.sii_l2t2_req[26] ^ `TOP.cpu.sii_l2t2_req[27] ^ `TOP.cpu.sii_l2t2_req[29] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t2_req_vld,4))) && ($0in_delay(sii_l2t2_req[24] == 0,4)) && ($0in_delay(sii_l2t2_req[25] == 0,2)) && ($0in_delay(sii_l2t2_req[26] == 1,4)) && ($0in_rising_edge($0in_delay(l2t2_sii_iq_dequeue,4))) && !(sii_wri_ecc6_l2_cycle3 == sii_l2b2_ecc[6]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc6_l2_wri_cycle3
*/

wire sii_wri_ecc0_l2_cycle4 =  (`TOP.cpu.sii_l2t2_req[0] ^ `TOP.cpu.sii_l2t2_req[1] ^ `TOP.cpu.sii_l2t2_req[3] ^ `TOP.cpu.sii_l2t2_req[4] ^ `TOP.cpu.sii_l2t2_req[6] ^ `TOP.cpu.sii_l2t2_req[8] ^ `TOP.cpu.sii_l2t2_req[10] ^ `TOP.cpu.sii_l2t2_req[11] ^ `TOP.cpu.sii_l2t2_req[13] ^ `TOP.cpu.sii_l2t2_req[15] ^ `TOP.cpu.sii_l2t2_req[17] ^ `TOP.cpu.sii_l2t2_req[19] ^ `TOP.cpu.sii_l2t2_req[21] ^ `TOP.cpu.sii_l2t2_req[23] ^ `TOP.cpu.sii_l2t2_req[25] ^ `TOP.cpu.sii_l2t2_req[26] ^ `TOP.cpu.sii_l2t2_req[28] ^ `TOP.cpu.sii_l2t2_req[30] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t2_req_vld,5))) && ($0in_delay(sii_l2t2_req[24] == 0,5)) && ($0in_delay(sii_l2t2_req[25] == 0,5)) && ($0in_delay(sii_l2t2_req[26] == 1,5)) && ($0in_rising_edge($0in_delay(l2t2_sii_iq_dequeue,5))) && !(sii_wri_ecc0_l2_cycle4 == sii_l2b2_ecc[0]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc0_l2_wri_cycle4
*/

wire sii_wri_ecc1_l2_cycle4 =  (`TOP.cpu.sii_l2t2_req[0] ^ `TOP.cpu.sii_l2t2_req[2] ^ `TOP.cpu.sii_l2t2_req[3] ^ `TOP.cpu.sii_l2t2_req[5] ^ `TOP.cpu.sii_l2t2_req[6] ^ `TOP.cpu.sii_l2t2_req[9] ^ `TOP.cpu.sii_l2t2_req[10] ^ `TOP.cpu.sii_l2t2_req[12] ^ `TOP.cpu.sii_l2t2_req[13] ^ `TOP.cpu.sii_l2t2_req[16] ^ `TOP.cpu.sii_l2t2_req[17] ^ `TOP.cpu.sii_l2t2_req[20] ^ `TOP.cpu.sii_l2t2_req[21] ^ `TOP.cpu.sii_l2t2_req[24] ^ `TOP.cpu.sii_l2t2_req[25] ^ `TOP.cpu.sii_l2t2_req[27] ^ `TOP.cpu.sii_l2t2_req[28] ^ `TOP.cpu.sii_l2t2_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t2_req_vld,5))) && ($0in_delay(sii_l2t2_req[24] == 0,5)) && ($0in_delay(sii_l2t2_req[25] == 0,5)) && ($0in_delay(sii_l2t2_req[26] == 1,5)) && ($0in_rising_edge($0in_delay(l2t2_sii_iq_dequeue,5))) && !(sii_wri_ecc1_l2_cycle4 == sii_l2b2_ecc[1]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc1_l2_wri_cycle4
*/

wire sii_wri_ecc2_l2_cycle4 =  (`TOP.cpu.sii_l2t2_req[1] ^ `TOP.cpu.sii_l2t2_req[2] ^ `TOP.cpu.sii_l2t2_req[3] ^ `TOP.cpu.sii_l2t2_req[7] ^ `TOP.cpu.sii_l2t2_req[8] ^ `TOP.cpu.sii_l2t2_req[9] ^ `TOP.cpu.sii_l2t2_req[10] ^ `TOP.cpu.sii_l2t2_req[14] ^ `TOP.cpu.sii_l2t2_req[15] ^ `TOP.cpu.sii_l2t2_req[16] ^ `TOP.cpu.sii_l2t2_req[17] ^ `TOP.cpu.sii_l2t2_req[22] ^ `TOP.cpu.sii_l2t2_req[23] ^ `TOP.cpu.sii_l2t2_req[24] ^ `TOP.cpu.sii_l2t2_req[25] ^ `TOP.cpu.sii_l2t2_req[29] ^ `TOP.cpu.sii_l2t2_req[30] ^ `TOP.cpu.sii_l2t2_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t2_req_vld,5))) && ($0in_delay(sii_l2t2_req[24] == 0,5)) && ($0in_delay(sii_l2t2_req[25] == 0,5)) && ($0in_delay(sii_l2t2_req[26] == 1,5)) && ($0in_rising_edge($0in_delay(l2t2_sii_iq_dequeue,5))) && !(sii_wri_ecc2_l2_cycle4 == sii_l2b2_ecc[2]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc2_l2_wri_cycle4
*/

wire sii_wri_ecc3_l2_cycle4 =  (`TOP.cpu.sii_l2t2_req[4] ^ `TOP.cpu.sii_l2t2_req[5] ^ `TOP.cpu.sii_l2t2_req[6] ^ `TOP.cpu.sii_l2t2_req[7] ^ `TOP.cpu.sii_l2t2_req[8] ^ `TOP.cpu.sii_l2t2_req[9] ^ `TOP.cpu.sii_l2t2_req[10] ^ `TOP.cpu.sii_l2t2_req[18] ^ `TOP.cpu.sii_l2t2_req[19] ^ `TOP.cpu.sii_l2t2_req[20] ^ `TOP.cpu.sii_l2t2_req[21] ^ `TOP.cpu.sii_l2t2_req[22] ^ `TOP.cpu.sii_l2t2_req[23] ^ `TOP.cpu.sii_l2t2_req[24] ^ `TOP.cpu.sii_l2t2_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t2_req_vld,5))) && ($0in_delay(sii_l2t2_req[24] == 0,5)) && ($0in_delay(sii_l2t2_req[25] == 0,5)) && ($0in_delay(sii_l2t2_req[26] == 1,5)) && ($0in_rising_edge($0in_delay(l2t2_sii_iq_dequeue,5))) && !(sii_wri_ecc3_l2_cycle4 == sii_l2b2_ecc[3]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc3_l2_wri_cycle4
*/

wire sii_wri_ecc4_l2_cycle4 =  ( `TOP.cpu.sii_l2t2_req[11] ^ `TOP.cpu.sii_l2t2_req[12] ^ `TOP.cpu.sii_l2t2_req[13] ^ `TOP.cpu.sii_l2t2_req[14] ^ `TOP.cpu.sii_l2t2_req[15] ^ `TOP.cpu.sii_l2t2_req[16] ^ `TOP.cpu.sii_l2t2_req[17] ^ `TOP.cpu.sii_l2t2_req[18] ^ `TOP.cpu.sii_l2t2_req[19] ^ `TOP.cpu.sii_l2t2_req[20] ^ `TOP.cpu.sii_l2t2_req[21] ^ `TOP.cpu.sii_l2t2_req[22] ^ `TOP.cpu.sii_l2t2_req[23] ^ `TOP.cpu.sii_l2t2_req[24] ^ `TOP.cpu.sii_l2t2_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t2_req_vld,5))) && ($0in_delay(sii_l2t2_req[24] == 0,5)) && ($0in_delay(sii_l2t2_req[25] == 0,5)) && ($0in_delay(sii_l2t2_req[26] == 1,5)) && ($0in_rising_edge($0in_delay(l2t2_sii_iq_dequeue,5))) && !(sii_wri_ecc4_l2_cycle4 == sii_l2b2_ecc[4]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc4_l2_wri_cycle4
*/

wire sii_wri_ecc5_l2_cycle4 =  (`TOP.cpu.sii_l2t2_req[26] ^ `TOP.cpu.sii_l2t2_req[27] ^ `TOP.cpu.sii_l2t2_req[28] ^ `TOP.cpu.sii_l2t2_req[29] ^ `TOP.cpu.sii_l2t2_req[30] ^ `TOP.cpu.sii_l2t2_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t2_req_vld,5))) && ($0in_delay(sii_l2t2_req[24] == 0,5)) && ($0in_delay(sii_l2t2_req[25] == 0,5)) && ($0in_delay(sii_l2t2_req[26] == 1,5)) && ($0in_rising_edge($0in_delay(l2t2_sii_iq_dequeue,5))) && !(sii_wri_ecc5_l2_cycle4 == sii_l2b2_ecc[5]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc5_l2_wri_cycle4
*/

wire sii_wri_ecc6_l2_cycle4 =  (`TOP.cpu.sii_l2t2_req[0] ^ `TOP.cpu.sii_l2t2_req[1] ^ `TOP.cpu.sii_l2t2_req[2] ^ `TOP.cpu.sii_l2t2_req[4] ^ `TOP.cpu.sii_l2t2_req[5] ^ `TOP.cpu.sii_l2t2_req[7] ^ `TOP.cpu.sii_l2t2_req[10] ^ `TOP.cpu.sii_l2t2_req[11] ^ `TOP.cpu.sii_l2t2_req[12] ^ `TOP.cpu.sii_l2t2_req[14] ^ `TOP.cpu.sii_l2t2_req[17] ^ `TOP.cpu.sii_l2t2_req[18] ^ `TOP.cpu.sii_l2t2_req[21] ^ `TOP.cpu.sii_l2t2_req[23] ^ `TOP.cpu.sii_l2t2_req[24] ^ `TOP.cpu.sii_l2t2_req[26] ^ `TOP.cpu.sii_l2t2_req[27] ^ `TOP.cpu.sii_l2t2_req[29] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t2_req_vld,5))) && ($0in_delay(sii_l2t2_req[24] == 0,5)) && ($0in_delay(sii_l2t2_req[25] == 0,5)) && ($0in_delay(sii_l2t2_req[26] == 1,5)) && ($0in_rising_edge($0in_delay(l2t2_sii_iq_dequeue,5))) && !(sii_wri_ecc6_l2_cycle4 == sii_l2b2_ecc[6]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc6_l2_wri_cycle4
*/

wire sii_wri_ecc0_l2_cycle5 =  (`TOP.cpu.sii_l2t2_req[0] ^ `TOP.cpu.sii_l2t2_req[1] ^ `TOP.cpu.sii_l2t2_req[3] ^ `TOP.cpu.sii_l2t2_req[4] ^ `TOP.cpu.sii_l2t2_req[6] ^ `TOP.cpu.sii_l2t2_req[8] ^ `TOP.cpu.sii_l2t2_req[10] ^ `TOP.cpu.sii_l2t2_req[11] ^ `TOP.cpu.sii_l2t2_req[13] ^ `TOP.cpu.sii_l2t2_req[15] ^ `TOP.cpu.sii_l2t2_req[17] ^ `TOP.cpu.sii_l2t2_req[19] ^ `TOP.cpu.sii_l2t2_req[21] ^ `TOP.cpu.sii_l2t2_req[23] ^ `TOP.cpu.sii_l2t2_req[25] ^ `TOP.cpu.sii_l2t2_req[26] ^ `TOP.cpu.sii_l2t2_req[28] ^ `TOP.cpu.sii_l2t2_req[30] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t2_req_vld,6))) && ($0in_delay(sii_l2t2_req[24] == 0,6)) && ($0in_delay(sii_l2t2_req[25] == 0,6)) && ($0in_delay(sii_l2t2_req[26] == 1,6)) && ($0in_rising_edge($0in_delay(l2t2_sii_iq_dequeue,6))) && !(sii_wri_ecc0_l2_cycle5 == sii_l2b2_ecc[0]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc0_l2_wri_cycle5
*/

wire sii_wri_ecc1_l2_cycle5 =  (`TOP.cpu.sii_l2t2_req[0] ^ `TOP.cpu.sii_l2t2_req[2] ^ `TOP.cpu.sii_l2t2_req[3] ^ `TOP.cpu.sii_l2t2_req[5] ^ `TOP.cpu.sii_l2t2_req[6] ^ `TOP.cpu.sii_l2t2_req[9] ^ `TOP.cpu.sii_l2t2_req[10] ^ `TOP.cpu.sii_l2t2_req[12] ^ `TOP.cpu.sii_l2t2_req[13] ^ `TOP.cpu.sii_l2t2_req[16] ^ `TOP.cpu.sii_l2t2_req[17] ^ `TOP.cpu.sii_l2t2_req[20] ^ `TOP.cpu.sii_l2t2_req[21] ^ `TOP.cpu.sii_l2t2_req[24] ^ `TOP.cpu.sii_l2t2_req[25] ^ `TOP.cpu.sii_l2t2_req[27] ^ `TOP.cpu.sii_l2t2_req[28] ^ `TOP.cpu.sii_l2t2_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t2_req_vld,6))) && ($0in_delay(sii_l2t2_req[24] == 0,6)) && ($0in_delay(sii_l2t2_req[25] == 0,6)) && ($0in_delay(sii_l2t2_req[26] == 1,6)) && ($0in_rising_edge($0in_delay(l2t2_sii_iq_dequeue,6))) && !(sii_wri_ecc1_l2_cycle5 == sii_l2b2_ecc[1]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc1_l2_wri_cycle5
*/

wire sii_wri_ecc2_l2_cycle5 =  (`TOP.cpu.sii_l2t2_req[1] ^ `TOP.cpu.sii_l2t2_req[2] ^ `TOP.cpu.sii_l2t2_req[3] ^ `TOP.cpu.sii_l2t2_req[7] ^ `TOP.cpu.sii_l2t2_req[8] ^ `TOP.cpu.sii_l2t2_req[9] ^ `TOP.cpu.sii_l2t2_req[10] ^ `TOP.cpu.sii_l2t2_req[14] ^ `TOP.cpu.sii_l2t2_req[15] ^ `TOP.cpu.sii_l2t2_req[16] ^ `TOP.cpu.sii_l2t2_req[17] ^ `TOP.cpu.sii_l2t2_req[22] ^ `TOP.cpu.sii_l2t2_req[23] ^ `TOP.cpu.sii_l2t2_req[24] ^ `TOP.cpu.sii_l2t2_req[25] ^ `TOP.cpu.sii_l2t2_req[29] ^ `TOP.cpu.sii_l2t2_req[30] ^ `TOP.cpu.sii_l2t2_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t2_req_vld,6))) && ($0in_delay(sii_l2t2_req[24] == 0,6)) && ($0in_delay(sii_l2t2_req[25] == 0,6)) && ($0in_delay(sii_l2t2_req[26] == 1,6)) && ($0in_rising_edge($0in_delay(l2t2_sii_iq_dequeue,6))) && !(sii_wri_ecc2_l2_cycle5 == sii_l2b2_ecc[2]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc2_l2_wri_cycle5
*/

wire sii_wri_ecc3_l2_cycle5 =  (`TOP.cpu.sii_l2t2_req[4] ^ `TOP.cpu.sii_l2t2_req[5] ^ `TOP.cpu.sii_l2t2_req[6] ^ `TOP.cpu.sii_l2t2_req[7] ^ `TOP.cpu.sii_l2t2_req[8] ^ `TOP.cpu.sii_l2t2_req[9] ^ `TOP.cpu.sii_l2t2_req[10] ^ `TOP.cpu.sii_l2t2_req[18] ^ `TOP.cpu.sii_l2t2_req[19] ^ `TOP.cpu.sii_l2t2_req[20] ^ `TOP.cpu.sii_l2t2_req[21] ^ `TOP.cpu.sii_l2t2_req[22] ^ `TOP.cpu.sii_l2t2_req[23] ^ `TOP.cpu.sii_l2t2_req[24] ^ `TOP.cpu.sii_l2t2_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t2_req_vld,6))) && ($0in_delay(sii_l2t2_req[24] == 0,6)) && ($0in_delay(sii_l2t2_req[25] == 0,6)) && ($0in_delay(sii_l2t2_req[26] == 1,6)) && ($0in_rising_edge($0in_delay(l2t2_sii_iq_dequeue,6))) && !(sii_wri_ecc3_l2_cycle5 == sii_l2b2_ecc[3]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc3_l2_wri_cycle5
*/

wire sii_wri_ecc4_l2_cycle5 =  ( `TOP.cpu.sii_l2t2_req[11] ^ `TOP.cpu.sii_l2t2_req[12] ^ `TOP.cpu.sii_l2t2_req[13] ^ `TOP.cpu.sii_l2t2_req[14] ^ `TOP.cpu.sii_l2t2_req[15] ^ `TOP.cpu.sii_l2t2_req[16] ^ `TOP.cpu.sii_l2t2_req[17] ^ `TOP.cpu.sii_l2t2_req[18] ^ `TOP.cpu.sii_l2t2_req[19] ^ `TOP.cpu.sii_l2t2_req[20] ^ `TOP.cpu.sii_l2t2_req[21] ^ `TOP.cpu.sii_l2t2_req[22] ^ `TOP.cpu.sii_l2t2_req[23] ^ `TOP.cpu.sii_l2t2_req[24] ^ `TOP.cpu.sii_l2t2_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t2_req_vld,6))) && ($0in_delay(sii_l2t2_req[24] == 0,6)) && ($0in_delay(sii_l2t2_req[25] == 0,6)) && ($0in_delay(sii_l2t2_req[26] == 1,6)) && ($0in_rising_edge($0in_delay(l2t2_sii_iq_dequeue,6))) && !(sii_wri_ecc4_l2_cycle5 == sii_l2b2_ecc[4]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc4_l2_wri_cycle5
*/

wire sii_wri_ecc5_l2_cycle5 =  (`TOP.cpu.sii_l2t2_req[26] ^ `TOP.cpu.sii_l2t2_req[27] ^ `TOP.cpu.sii_l2t2_req[28] ^ `TOP.cpu.sii_l2t2_req[29] ^ `TOP.cpu.sii_l2t2_req[30] ^ `TOP.cpu.sii_l2t2_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t2_req_vld,6))) && ($0in_delay(sii_l2t2_req[24] == 0,6)) && ($0in_delay(sii_l2t2_req[25] == 0,2)) && ($0in_delay(sii_l2t2_req[26] == 1,6)) && ($0in_rising_edge($0in_delay(l2t2_sii_iq_dequeue,6))) && !(sii_wri_ecc5_l2_cycle5 == sii_l2b2_ecc[5]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc5_l2_wri_cycle5
*/

wire sii_wri_ecc6_l2_cycle5 =  (`TOP.cpu.sii_l2t2_req[0] ^ `TOP.cpu.sii_l2t2_req[1] ^ `TOP.cpu.sii_l2t2_req[2] ^ `TOP.cpu.sii_l2t2_req[4] ^ `TOP.cpu.sii_l2t2_req[5] ^ `TOP.cpu.sii_l2t2_req[7] ^ `TOP.cpu.sii_l2t2_req[10] ^ `TOP.cpu.sii_l2t2_req[11] ^ `TOP.cpu.sii_l2t2_req[12] ^ `TOP.cpu.sii_l2t2_req[14] ^ `TOP.cpu.sii_l2t2_req[17] ^ `TOP.cpu.sii_l2t2_req[18] ^ `TOP.cpu.sii_l2t2_req[21] ^ `TOP.cpu.sii_l2t2_req[23] ^ `TOP.cpu.sii_l2t2_req[24] ^ `TOP.cpu.sii_l2t2_req[26] ^ `TOP.cpu.sii_l2t2_req[27] ^ `TOP.cpu.sii_l2t2_req[29] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t2_req_vld,6))) && ($0in_delay(sii_l2t2_req[24] == 0,6)) && ($0in_delay(sii_l2t2_req[25] == 0,6)) && ($0in_delay(sii_l2t2_req[26] == 1,6)) && ($0in_rising_edge($0in_delay(l2t2_sii_iq_dequeue,6))) && !(sii_wri_ecc6_l2_cycle5 == sii_l2b2_ecc[6]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc6_l2_wri_cycle5
*/

wire sii_wri_ecc0_l2_cycle6 =  (`TOP.cpu.sii_l2t2_req[0] ^ `TOP.cpu.sii_l2t2_req[1] ^ `TOP.cpu.sii_l2t2_req[3] ^ `TOP.cpu.sii_l2t2_req[4] ^ `TOP.cpu.sii_l2t2_req[6] ^ `TOP.cpu.sii_l2t2_req[8] ^ `TOP.cpu.sii_l2t2_req[10] ^ `TOP.cpu.sii_l2t2_req[11] ^ `TOP.cpu.sii_l2t2_req[13] ^ `TOP.cpu.sii_l2t2_req[15] ^ `TOP.cpu.sii_l2t2_req[17] ^ `TOP.cpu.sii_l2t2_req[19] ^ `TOP.cpu.sii_l2t2_req[21] ^ `TOP.cpu.sii_l2t2_req[23] ^ `TOP.cpu.sii_l2t2_req[25] ^ `TOP.cpu.sii_l2t2_req[26] ^ `TOP.cpu.sii_l2t2_req[28] ^ `TOP.cpu.sii_l2t2_req[30] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t2_req_vld,7))) && ($0in_delay(sii_l2t2_req[24] == 0,7)) && ($0in_delay(sii_l2t2_req[25] == 0,7)) && ($0in_delay(sii_l2t2_req[26] == 1,7)) && ($0in_rising_edge($0in_delay(l2t2_sii_iq_dequeue,7))) && !(sii_wri_ecc0_l2_cycle6 == sii_l2b2_ecc[0]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc0_l2_wri_cycle6
*/

wire sii_wri_ecc1_l2_cycle6 =  (`TOP.cpu.sii_l2t2_req[0] ^ `TOP.cpu.sii_l2t2_req[2] ^ `TOP.cpu.sii_l2t2_req[3] ^ `TOP.cpu.sii_l2t2_req[5] ^ `TOP.cpu.sii_l2t2_req[6] ^ `TOP.cpu.sii_l2t2_req[9] ^ `TOP.cpu.sii_l2t2_req[10] ^ `TOP.cpu.sii_l2t2_req[12] ^ `TOP.cpu.sii_l2t2_req[13] ^ `TOP.cpu.sii_l2t2_req[16] ^ `TOP.cpu.sii_l2t2_req[17] ^ `TOP.cpu.sii_l2t2_req[20] ^ `TOP.cpu.sii_l2t2_req[21] ^ `TOP.cpu.sii_l2t2_req[24] ^ `TOP.cpu.sii_l2t2_req[25] ^ `TOP.cpu.sii_l2t2_req[27] ^ `TOP.cpu.sii_l2t2_req[28] ^ `TOP.cpu.sii_l2t2_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t2_req_vld,7))) && ($0in_delay(sii_l2t2_req[24] == 0,7)) && ($0in_delay(sii_l2t2_req[25] == 0,7)) && ($0in_delay(sii_l2t2_req[26] == 1,7)) && ($0in_rising_edge($0in_delay(l2t2_sii_iq_dequeue,7))) && !(sii_wri_ecc1_l2_cycle6 == sii_l2b2_ecc[1]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc1_l2_wri_cycle6
*/

wire sii_wri_ecc2_l2_cycle6 =  (`TOP.cpu.sii_l2t2_req[1] ^ `TOP.cpu.sii_l2t2_req[2] ^ `TOP.cpu.sii_l2t2_req[3] ^ `TOP.cpu.sii_l2t2_req[7] ^ `TOP.cpu.sii_l2t2_req[8] ^ `TOP.cpu.sii_l2t2_req[9] ^ `TOP.cpu.sii_l2t2_req[10] ^ `TOP.cpu.sii_l2t2_req[14] ^ `TOP.cpu.sii_l2t2_req[15] ^ `TOP.cpu.sii_l2t2_req[16] ^ `TOP.cpu.sii_l2t2_req[17] ^ `TOP.cpu.sii_l2t2_req[22] ^ `TOP.cpu.sii_l2t2_req[23] ^ `TOP.cpu.sii_l2t2_req[24] ^ `TOP.cpu.sii_l2t2_req[25] ^ `TOP.cpu.sii_l2t2_req[29] ^ `TOP.cpu.sii_l2t2_req[30] ^ `TOP.cpu.sii_l2t2_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t2_req_vld,7))) && ($0in_delay(sii_l2t2_req[24] == 0,7)) && ($0in_delay(sii_l2t2_req[25] == 0,7)) && ($0in_delay(sii_l2t2_req[26] == 1,7)) && ($0in_rising_edge($0in_delay(l2t2_sii_iq_dequeue,7))) && !(sii_wri_ecc2_l2_cycle6 == sii_l2b2_ecc[2]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc2_l2_wri_cycle6
*/

wire sii_wri_ecc3_l2_cycle6 =  (`TOP.cpu.sii_l2t2_req[4] ^ `TOP.cpu.sii_l2t2_req[5] ^ `TOP.cpu.sii_l2t2_req[6] ^ `TOP.cpu.sii_l2t2_req[7] ^ `TOP.cpu.sii_l2t2_req[8] ^ `TOP.cpu.sii_l2t2_req[9] ^ `TOP.cpu.sii_l2t2_req[10] ^ `TOP.cpu.sii_l2t2_req[18] ^ `TOP.cpu.sii_l2t2_req[19] ^ `TOP.cpu.sii_l2t2_req[20] ^ `TOP.cpu.sii_l2t2_req[21] ^ `TOP.cpu.sii_l2t2_req[22] ^ `TOP.cpu.sii_l2t2_req[23] ^ `TOP.cpu.sii_l2t2_req[24] ^ `TOP.cpu.sii_l2t2_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t2_req_vld,7))) && ($0in_delay(sii_l2t2_req[24] == 0,7)) && ($0in_delay(sii_l2t2_req[25] == 0,7)) && ($0in_delay(sii_l2t2_req[26] == 1,7)) && ($0in_rising_edge($0in_delay(l2t2_sii_iq_dequeue,7))) && !(sii_wri_ecc3_l2_cycle6 == sii_l2b2_ecc[3]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc3_l2_wri_cycle6
*/

wire sii_wri_ecc4_l2_cycle6 =  ( `TOP.cpu.sii_l2t2_req[11] ^ `TOP.cpu.sii_l2t2_req[12] ^ `TOP.cpu.sii_l2t2_req[13] ^ `TOP.cpu.sii_l2t2_req[14] ^ `TOP.cpu.sii_l2t2_req[15] ^ `TOP.cpu.sii_l2t2_req[16] ^ `TOP.cpu.sii_l2t2_req[17] ^ `TOP.cpu.sii_l2t2_req[18] ^ `TOP.cpu.sii_l2t2_req[19] ^ `TOP.cpu.sii_l2t2_req[20] ^ `TOP.cpu.sii_l2t2_req[21] ^ `TOP.cpu.sii_l2t2_req[22] ^ `TOP.cpu.sii_l2t2_req[23] ^ `TOP.cpu.sii_l2t2_req[24] ^ `TOP.cpu.sii_l2t2_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t2_req_vld,7))) && ($0in_delay(sii_l2t2_req[24] == 0,7)) && ($0in_delay(sii_l2t2_req[25] == 0,7)) && ($0in_delay(sii_l2t2_req[26] == 1,7)) && ($0in_rising_edge($0in_delay(l2t2_sii_iq_dequeue,7))) && !(sii_wri_ecc4_l2_cycle6 == sii_l2b2_ecc[4]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc4_l2_wri_cycle6
*/

wire sii_wri_ecc5_l2_cycle6 =  (`TOP.cpu.sii_l2t2_req[26] ^ `TOP.cpu.sii_l2t2_req[27] ^ `TOP.cpu.sii_l2t2_req[28] ^ `TOP.cpu.sii_l2t2_req[29] ^ `TOP.cpu.sii_l2t2_req[30] ^ `TOP.cpu.sii_l2t2_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t2_req_vld,7))) && ($0in_delay(sii_l2t2_req[24] == 0,7)) && ($0in_delay(sii_l2t2_req[25] == 0,7)) && ($0in_delay(sii_l2t2_req[26] == 1,7)) && ($0in_rising_edge($0in_delay(l2t2_sii_iq_dequeue,7))) && !(sii_wri_ecc5_l2_cycle6 == sii_l2b2_ecc[5]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc5_l2_wri_cycle6
*/

wire sii_wri_ecc6_l2_cycle6 =  (`TOP.cpu.sii_l2t2_req[0] ^ `TOP.cpu.sii_l2t2_req[1] ^ `TOP.cpu.sii_l2t2_req[2] ^ `TOP.cpu.sii_l2t2_req[4] ^ `TOP.cpu.sii_l2t2_req[5] ^ `TOP.cpu.sii_l2t2_req[7] ^ `TOP.cpu.sii_l2t2_req[10] ^ `TOP.cpu.sii_l2t2_req[11] ^ `TOP.cpu.sii_l2t2_req[12] ^ `TOP.cpu.sii_l2t2_req[14] ^ `TOP.cpu.sii_l2t2_req[17] ^ `TOP.cpu.sii_l2t2_req[18] ^ `TOP.cpu.sii_l2t2_req[21] ^ `TOP.cpu.sii_l2t2_req[23] ^ `TOP.cpu.sii_l2t2_req[24] ^ `TOP.cpu.sii_l2t2_req[26] ^ `TOP.cpu.sii_l2t2_req[27] ^ `TOP.cpu.sii_l2t2_req[29] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t2_req_vld,7))) && ($0in_delay(sii_l2t2_req[24] == 0,7)) && ($0in_delay(sii_l2t2_req[25] == 0,7)) && ($0in_delay(sii_l2t2_req[26] == 1,7)) && ($0in_rising_edge($0in_delay(l2t2_sii_iq_dequeue,7))) && !(sii_wri_ecc6_l2_cycle6 == sii_l2b2_ecc[6]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc6_l2_wri_cycle6
*/

wire sii_wri_ecc0_l2_cycle7 =  (`TOP.cpu.sii_l2t2_req[0] ^ `TOP.cpu.sii_l2t2_req[1] ^ `TOP.cpu.sii_l2t2_req[3] ^ `TOP.cpu.sii_l2t2_req[4] ^ `TOP.cpu.sii_l2t2_req[6] ^ `TOP.cpu.sii_l2t2_req[8] ^ `TOP.cpu.sii_l2t2_req[10] ^ `TOP.cpu.sii_l2t2_req[11] ^ `TOP.cpu.sii_l2t2_req[13] ^ `TOP.cpu.sii_l2t2_req[15] ^ `TOP.cpu.sii_l2t2_req[17] ^ `TOP.cpu.sii_l2t2_req[19] ^ `TOP.cpu.sii_l2t2_req[21] ^ `TOP.cpu.sii_l2t2_req[23] ^ `TOP.cpu.sii_l2t2_req[25] ^ `TOP.cpu.sii_l2t2_req[26] ^ `TOP.cpu.sii_l2t2_req[28] ^ `TOP.cpu.sii_l2t2_req[30] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t2_req_vld,8))) && ($0in_delay(sii_l2t2_req[24] == 0,8)) && ($0in_delay(sii_l2t2_req[25] == 0,8)) && ($0in_delay(sii_l2t2_req[26] == 1,8)) && ($0in_rising_edge($0in_delay(l2t2_sii_iq_dequeue,8))) && !(sii_wri_ecc0_l2_cycle7 == sii_l2b2_ecc[0]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc0_l2_wri_cycle7
*/

wire sii_wri_ecc1_l2_cycle7 =  (`TOP.cpu.sii_l2t2_req[0] ^ `TOP.cpu.sii_l2t2_req[2] ^ `TOP.cpu.sii_l2t2_req[3] ^ `TOP.cpu.sii_l2t2_req[5] ^ `TOP.cpu.sii_l2t2_req[6] ^ `TOP.cpu.sii_l2t2_req[9] ^ `TOP.cpu.sii_l2t2_req[10] ^ `TOP.cpu.sii_l2t2_req[12] ^ `TOP.cpu.sii_l2t2_req[13] ^ `TOP.cpu.sii_l2t2_req[16] ^ `TOP.cpu.sii_l2t2_req[17] ^ `TOP.cpu.sii_l2t2_req[20] ^ `TOP.cpu.sii_l2t2_req[21] ^ `TOP.cpu.sii_l2t2_req[24] ^ `TOP.cpu.sii_l2t2_req[25] ^ `TOP.cpu.sii_l2t2_req[27] ^ `TOP.cpu.sii_l2t2_req[28] ^ `TOP.cpu.sii_l2t2_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t2_req_vld,8))) && ($0in_delay(sii_l2t2_req[24] == 0,8)) && ($0in_delay(sii_l2t2_req[25] == 0,8)) && ($0in_delay(sii_l2t2_req[26] == 1,8)) && ($0in_rising_edge($0in_delay(l2t2_sii_iq_dequeue,8))) && !(sii_wri_ecc1_l2_cycle7 == sii_l2b2_ecc[1]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc1_l2_wri_cycle7
*/

wire sii_wri_ecc2_l2_cycle7 =  (`TOP.cpu.sii_l2t2_req[1] ^ `TOP.cpu.sii_l2t2_req[2] ^ `TOP.cpu.sii_l2t2_req[3] ^ `TOP.cpu.sii_l2t2_req[7] ^ `TOP.cpu.sii_l2t2_req[8] ^ `TOP.cpu.sii_l2t2_req[9] ^ `TOP.cpu.sii_l2t2_req[10] ^ `TOP.cpu.sii_l2t2_req[14] ^ `TOP.cpu.sii_l2t2_req[15] ^ `TOP.cpu.sii_l2t2_req[16] ^ `TOP.cpu.sii_l2t2_req[17] ^ `TOP.cpu.sii_l2t2_req[22] ^ `TOP.cpu.sii_l2t2_req[23] ^ `TOP.cpu.sii_l2t2_req[24] ^ `TOP.cpu.sii_l2t2_req[25] ^ `TOP.cpu.sii_l2t2_req[29] ^ `TOP.cpu.sii_l2t2_req[30] ^ `TOP.cpu.sii_l2t2_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t2_req_vld,8))) && ($0in_delay(sii_l2t2_req[24] == 0,8)) && ($0in_delay(sii_l2t2_req[25] == 0,8)) && ($0in_delay(sii_l2t2_req[26] == 1,8)) && ($0in_rising_edge($0in_delay(l2t2_sii_iq_dequeue,8))) && !(sii_wri_ecc2_l2_cycle7 == sii_l2b2_ecc[2]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc2_l2_wri_cycle7
*/

wire sii_wri_ecc3_l2_cycle7 =  (`TOP.cpu.sii_l2t2_req[4] ^ `TOP.cpu.sii_l2t2_req[5] ^ `TOP.cpu.sii_l2t2_req[6] ^ `TOP.cpu.sii_l2t2_req[7] ^ `TOP.cpu.sii_l2t2_req[8] ^ `TOP.cpu.sii_l2t2_req[9] ^ `TOP.cpu.sii_l2t2_req[10] ^ `TOP.cpu.sii_l2t2_req[18] ^ `TOP.cpu.sii_l2t2_req[19] ^ `TOP.cpu.sii_l2t2_req[20] ^ `TOP.cpu.sii_l2t2_req[21] ^ `TOP.cpu.sii_l2t2_req[22] ^ `TOP.cpu.sii_l2t2_req[23] ^ `TOP.cpu.sii_l2t2_req[24] ^ `TOP.cpu.sii_l2t2_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t2_req_vld,8))) && ($0in_delay(sii_l2t2_req[24] == 0,8)) && ($0in_delay(sii_l2t2_req[25] == 0,8)) && ($0in_delay(sii_l2t2_req[26] == 1,8)) && ($0in_rising_edge($0in_delay(l2t2_sii_iq_dequeue,8))) && !(sii_wri_ecc3_l2_cycle7 == sii_l2b2_ecc[3]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc3_l2_wri_cycle7
*/

wire sii_wri_ecc4_l2_cycle7 =  ( `TOP.cpu.sii_l2t2_req[11] ^ `TOP.cpu.sii_l2t2_req[12] ^ `TOP.cpu.sii_l2t2_req[13] ^ `TOP.cpu.sii_l2t2_req[14] ^ `TOP.cpu.sii_l2t2_req[15] ^ `TOP.cpu.sii_l2t2_req[16] ^ `TOP.cpu.sii_l2t2_req[17] ^ `TOP.cpu.sii_l2t2_req[18] ^ `TOP.cpu.sii_l2t2_req[19] ^ `TOP.cpu.sii_l2t2_req[20] ^ `TOP.cpu.sii_l2t2_req[21] ^ `TOP.cpu.sii_l2t2_req[22] ^ `TOP.cpu.sii_l2t2_req[23] ^ `TOP.cpu.sii_l2t2_req[24] ^ `TOP.cpu.sii_l2t2_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t2_req_vld,8))) && ($0in_delay(sii_l2t2_req[24] == 0,8)) && ($0in_delay(sii_l2t2_req[25] == 0,8)) && ($0in_delay(sii_l2t2_req[26] == 1,8)) && ($0in_rising_edge($0in_delay(l2t2_sii_iq_dequeue,8))) && !(sii_wri_ecc4_l2_cycle7 == sii_l2b2_ecc[4]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc4_l2_wri_cycle7
*/

wire sii_wri_ecc5_l2_cycle7 =  (`TOP.cpu.sii_l2t2_req[26] ^ `TOP.cpu.sii_l2t2_req[27] ^ `TOP.cpu.sii_l2t2_req[28] ^ `TOP.cpu.sii_l2t2_req[29] ^ `TOP.cpu.sii_l2t2_req[30] ^ `TOP.cpu.sii_l2t2_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t2_req_vld,8))) && ($0in_delay(sii_l2t2_req[24] == 0,8)) && ($0in_delay(sii_l2t2_req[25] == 0,8)) && ($0in_delay(sii_l2t2_req[26] == 1,8)) && ($0in_rising_edge($0in_delay(l2t2_sii_iq_dequeue,8))) && !(sii_wri_ecc5_l2_cycle7 == sii_l2b2_ecc[5]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc5_l2_wri_cycle7
*/

wire sii_wri_ecc6_l2_cycle7 =  (`TOP.cpu.sii_l2t2_req[0] ^ `TOP.cpu.sii_l2t2_req[1] ^ `TOP.cpu.sii_l2t2_req[2] ^ `TOP.cpu.sii_l2t2_req[4] ^ `TOP.cpu.sii_l2t2_req[5] ^ `TOP.cpu.sii_l2t2_req[7] ^ `TOP.cpu.sii_l2t2_req[10] ^ `TOP.cpu.sii_l2t2_req[11] ^ `TOP.cpu.sii_l2t2_req[12] ^ `TOP.cpu.sii_l2t2_req[14] ^ `TOP.cpu.sii_l2t2_req[17] ^ `TOP.cpu.sii_l2t2_req[18] ^ `TOP.cpu.sii_l2t2_req[21] ^ `TOP.cpu.sii_l2t2_req[23] ^ `TOP.cpu.sii_l2t2_req[24] ^ `TOP.cpu.sii_l2t2_req[26] ^ `TOP.cpu.sii_l2t2_req[27] ^ `TOP.cpu.sii_l2t2_req[29] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t2_req_vld,8))) && ($0in_delay(sii_l2t2_req[24] == 0,8)) && ($0in_delay(sii_l2t2_req[25] == 0,8)) && ($0in_delay(sii_l2t2_req[26] == 1,8)) && ($0in_rising_edge($0in_delay(l2t2_sii_iq_dequeue,8))) && !(sii_wri_ecc6_l2_cycle7 == sii_l2b2_ecc[6]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc6_l2_wri_cycle7
*/

wire sii_wri_ecc0_l2_cycle8 =  (`TOP.cpu.sii_l2t2_req[0] ^ `TOP.cpu.sii_l2t2_req[1] ^ `TOP.cpu.sii_l2t2_req[3] ^ `TOP.cpu.sii_l2t2_req[4] ^ `TOP.cpu.sii_l2t2_req[6] ^ `TOP.cpu.sii_l2t2_req[8] ^ `TOP.cpu.sii_l2t2_req[10] ^ `TOP.cpu.sii_l2t2_req[11] ^ `TOP.cpu.sii_l2t2_req[13] ^ `TOP.cpu.sii_l2t2_req[15] ^ `TOP.cpu.sii_l2t2_req[17] ^ `TOP.cpu.sii_l2t2_req[19] ^ `TOP.cpu.sii_l2t2_req[21] ^ `TOP.cpu.sii_l2t2_req[23] ^ `TOP.cpu.sii_l2t2_req[25] ^ `TOP.cpu.sii_l2t2_req[26] ^ `TOP.cpu.sii_l2t2_req[28] ^ `TOP.cpu.sii_l2t2_req[30] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t2_req_vld,9))) && ($0in_delay(sii_l2t2_req[24] == 0,9)) && ($0in_delay(sii_l2t2_req[25] == 0,9)) && ($0in_delay(sii_l2t2_req[26] == 1,9)) && ($0in_rising_edge($0in_delay(l2t2_sii_iq_dequeue,9))) && !(sii_wri_ecc0_l2_cycle8 == sii_l2b2_ecc[0]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc0_l2_wri_cycle8
*/

wire sii_wri_ecc1_l2_cycle8 =  (`TOP.cpu.sii_l2t2_req[0] ^ `TOP.cpu.sii_l2t2_req[2] ^ `TOP.cpu.sii_l2t2_req[3] ^ `TOP.cpu.sii_l2t2_req[5] ^ `TOP.cpu.sii_l2t2_req[6] ^ `TOP.cpu.sii_l2t2_req[9] ^ `TOP.cpu.sii_l2t2_req[10] ^ `TOP.cpu.sii_l2t2_req[12] ^ `TOP.cpu.sii_l2t2_req[13] ^ `TOP.cpu.sii_l2t2_req[16] ^ `TOP.cpu.sii_l2t2_req[17] ^ `TOP.cpu.sii_l2t2_req[20] ^ `TOP.cpu.sii_l2t2_req[21] ^ `TOP.cpu.sii_l2t2_req[24] ^ `TOP.cpu.sii_l2t2_req[25] ^ `TOP.cpu.sii_l2t2_req[27] ^ `TOP.cpu.sii_l2t2_req[28] ^ `TOP.cpu.sii_l2t2_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t2_req_vld,9))) && ($0in_delay(sii_l2t2_req[24] == 0,9)) && ($0in_delay(sii_l2t2_req[25] == 0,9)) && ($0in_delay(sii_l2t2_req[26] == 1,9)) && ($0in_rising_edge($0in_delay(l2t2_sii_iq_dequeue,9))) && !(sii_wri_ecc1_l2_cycle8 == sii_l2b2_ecc[1]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc1_l2_wri_cycle8
*/

wire sii_wri_ecc2_l2_cycle8 =  (`TOP.cpu.sii_l2t2_req[1] ^ `TOP.cpu.sii_l2t2_req[2] ^ `TOP.cpu.sii_l2t2_req[3] ^ `TOP.cpu.sii_l2t2_req[7] ^ `TOP.cpu.sii_l2t2_req[8] ^ `TOP.cpu.sii_l2t2_req[9] ^ `TOP.cpu.sii_l2t2_req[10] ^ `TOP.cpu.sii_l2t2_req[14] ^ `TOP.cpu.sii_l2t2_req[15] ^ `TOP.cpu.sii_l2t2_req[16] ^ `TOP.cpu.sii_l2t2_req[17] ^ `TOP.cpu.sii_l2t2_req[22] ^ `TOP.cpu.sii_l2t2_req[23] ^ `TOP.cpu.sii_l2t2_req[24] ^ `TOP.cpu.sii_l2t2_req[25] ^ `TOP.cpu.sii_l2t2_req[29] ^ `TOP.cpu.sii_l2t2_req[30] ^ `TOP.cpu.sii_l2t2_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t2_req_vld,9))) && ($0in_delay(sii_l2t2_req[24] == 0,9)) && ($0in_delay(sii_l2t2_req[25] == 0,9)) && ($0in_delay(sii_l2t2_req[26] == 1,9)) && ($0in_rising_edge($0in_delay(l2t2_sii_iq_dequeue,9))) && !(sii_wri_ecc2_l2_cycle8 == sii_l2b2_ecc[2]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc2_l2_wri_cycle8
*/

wire sii_wri_ecc3_l2_cycle8 =  (`TOP.cpu.sii_l2t2_req[4] ^ `TOP.cpu.sii_l2t2_req[5] ^ `TOP.cpu.sii_l2t2_req[6] ^ `TOP.cpu.sii_l2t2_req[7] ^ `TOP.cpu.sii_l2t2_req[8] ^ `TOP.cpu.sii_l2t2_req[9] ^ `TOP.cpu.sii_l2t2_req[10] ^ `TOP.cpu.sii_l2t2_req[18] ^ `TOP.cpu.sii_l2t2_req[19] ^ `TOP.cpu.sii_l2t2_req[20] ^ `TOP.cpu.sii_l2t2_req[21] ^ `TOP.cpu.sii_l2t2_req[22] ^ `TOP.cpu.sii_l2t2_req[23] ^ `TOP.cpu.sii_l2t2_req[24] ^ `TOP.cpu.sii_l2t2_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t2_req_vld,9))) && ($0in_delay(sii_l2t2_req[24] == 0,9)) && ($0in_delay(sii_l2t2_req[25] == 0,9)) && ($0in_delay(sii_l2t2_req[26] == 1,9)) && ($0in_rising_edge($0in_delay(l2t2_sii_iq_dequeue,9))) && !(sii_wri_ecc3_l2_cycle8 == sii_l2b2_ecc[3]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc3_l2_wri_cycle8
*/

wire sii_wri_ecc4_l2_cycle8 =  ( `TOP.cpu.sii_l2t2_req[11] ^ `TOP.cpu.sii_l2t2_req[12] ^ `TOP.cpu.sii_l2t2_req[13] ^ `TOP.cpu.sii_l2t2_req[14] ^ `TOP.cpu.sii_l2t2_req[15] ^ `TOP.cpu.sii_l2t2_req[16] ^ `TOP.cpu.sii_l2t2_req[17] ^ `TOP.cpu.sii_l2t2_req[18] ^ `TOP.cpu.sii_l2t2_req[19] ^ `TOP.cpu.sii_l2t2_req[20] ^ `TOP.cpu.sii_l2t2_req[21] ^ `TOP.cpu.sii_l2t2_req[22] ^ `TOP.cpu.sii_l2t2_req[23] ^ `TOP.cpu.sii_l2t2_req[24] ^ `TOP.cpu.sii_l2t2_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t2_req_vld,9))) && ($0in_delay(sii_l2t2_req[24] == 0,9)) && ($0in_delay(sii_l2t2_req[25] == 0,9)) && ($0in_delay(sii_l2t2_req[26] == 1,9)) && ($0in_rising_edge($0in_delay(l2t2_sii_iq_dequeue,9))) && !(sii_wri_ecc4_l2_cycle8 == sii_l2b2_ecc[4]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc4_l2_wri_cycle8
*/

wire sii_wri_ecc5_l2_cycle8 =  (`TOP.cpu.sii_l2t2_req[26] ^ `TOP.cpu.sii_l2t2_req[27] ^ `TOP.cpu.sii_l2t2_req[28] ^ `TOP.cpu.sii_l2t2_req[29] ^ `TOP.cpu.sii_l2t2_req[30] ^ `TOP.cpu.sii_l2t2_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t2_req_vld,9))) && ($0in_delay(sii_l2t2_req[24] == 0,9)) && ($0in_delay(sii_l2t2_req[25] == 0,9)) && ($0in_delay(sii_l2t2_req[26] == 1,9)) && ($0in_rising_edge($0in_delay(l2t2_sii_iq_dequeue,9))) && !(sii_wri_ecc5_l2_cycle8 == sii_l2b2_ecc[5]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc5_l2_wri_cycle8
*/

wire sii_wri_ecc6_l2_cycle8 =  (`TOP.cpu.sii_l2t2_req[0] ^ `TOP.cpu.sii_l2t2_req[1] ^ `TOP.cpu.sii_l2t2_req[2] ^ `TOP.cpu.sii_l2t2_req[4] ^ `TOP.cpu.sii_l2t2_req[5] ^ `TOP.cpu.sii_l2t2_req[7] ^ `TOP.cpu.sii_l2t2_req[10] ^ `TOP.cpu.sii_l2t2_req[11] ^ `TOP.cpu.sii_l2t2_req[12] ^ `TOP.cpu.sii_l2t2_req[14] ^ `TOP.cpu.sii_l2t2_req[17] ^ `TOP.cpu.sii_l2t2_req[18] ^ `TOP.cpu.sii_l2t2_req[21] ^ `TOP.cpu.sii_l2t2_req[23] ^ `TOP.cpu.sii_l2t2_req[24] ^ `TOP.cpu.sii_l2t2_req[26] ^ `TOP.cpu.sii_l2t2_req[27] ^ `TOP.cpu.sii_l2t2_req[29] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t2_req_vld,9))) && ($0in_delay(sii_l2t2_req[24] == 0,9)) && ($0in_delay(sii_l2t2_req[25] == 0,9)) && ($0in_delay(sii_l2t2_req[26] == 1,9)) && ($0in_rising_edge($0in_delay(l2t2_sii_iq_dequeue,9))) && !(sii_wri_ecc6_l2_cycle8 == sii_l2b2_ecc[6]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc6_l2_wri_cycle8
*/

wire sii_wri_ecc0_l2_cycle9 =  (`TOP.cpu.sii_l2t2_req[0] ^ `TOP.cpu.sii_l2t2_req[1] ^ `TOP.cpu.sii_l2t2_req[3] ^ `TOP.cpu.sii_l2t2_req[4] ^ `TOP.cpu.sii_l2t2_req[6] ^ `TOP.cpu.sii_l2t2_req[8] ^ `TOP.cpu.sii_l2t2_req[10] ^ `TOP.cpu.sii_l2t2_req[11] ^ `TOP.cpu.sii_l2t2_req[13] ^ `TOP.cpu.sii_l2t2_req[15] ^ `TOP.cpu.sii_l2t2_req[17] ^ `TOP.cpu.sii_l2t2_req[19] ^ `TOP.cpu.sii_l2t2_req[21] ^ `TOP.cpu.sii_l2t2_req[23] ^ `TOP.cpu.sii_l2t2_req[25] ^ `TOP.cpu.sii_l2t2_req[26] ^ `TOP.cpu.sii_l2t2_req[28] ^ `TOP.cpu.sii_l2t2_req[30] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t2_req_vld,10))) && ($0in_delay(sii_l2t2_req[24] == 0,10)) && ($0in_delay(sii_l2t2_req[25] == 0,10)) && ($0in_delay(sii_l2t2_req[26] == 1,10)) && ($0in_rising_edge($0in_delay(l2t2_sii_iq_dequeue,10))) && !(sii_wri_ecc0_l2_cycle9 == sii_l2b2_ecc[0]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc0_l2_wri_cycle9
*/

wire sii_wri_ecc1_l2_cycle9 =  (`TOP.cpu.sii_l2t2_req[0] ^ `TOP.cpu.sii_l2t2_req[2] ^ `TOP.cpu.sii_l2t2_req[3] ^ `TOP.cpu.sii_l2t2_req[5] ^ `TOP.cpu.sii_l2t2_req[6] ^ `TOP.cpu.sii_l2t2_req[9] ^ `TOP.cpu.sii_l2t2_req[10] ^ `TOP.cpu.sii_l2t2_req[12] ^ `TOP.cpu.sii_l2t2_req[13] ^ `TOP.cpu.sii_l2t2_req[16] ^ `TOP.cpu.sii_l2t2_req[17] ^ `TOP.cpu.sii_l2t2_req[20] ^ `TOP.cpu.sii_l2t2_req[21] ^ `TOP.cpu.sii_l2t2_req[24] ^ `TOP.cpu.sii_l2t2_req[25] ^ `TOP.cpu.sii_l2t2_req[27] ^ `TOP.cpu.sii_l2t2_req[28] ^ `TOP.cpu.sii_l2t2_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t2_req_vld,10))) && ($0in_delay(sii_l2t2_req[24] == 0,10)) && ($0in_delay(sii_l2t2_req[25] == 0,10)) && ($0in_delay(sii_l2t2_req[26] == 1,10)) && ($0in_rising_edge($0in_delay(l2t2_sii_iq_dequeue,10))) && !(sii_wri_ecc1_l2_cycle9 == sii_l2b2_ecc[1]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc1_l2_wri_cycle9
*/

wire sii_wri_ecc2_l2_cycle9 =  (`TOP.cpu.sii_l2t2_req[1] ^ `TOP.cpu.sii_l2t2_req[2] ^ `TOP.cpu.sii_l2t2_req[3] ^ `TOP.cpu.sii_l2t2_req[7] ^ `TOP.cpu.sii_l2t2_req[8] ^ `TOP.cpu.sii_l2t2_req[9] ^ `TOP.cpu.sii_l2t2_req[10] ^ `TOP.cpu.sii_l2t2_req[14] ^ `TOP.cpu.sii_l2t2_req[15] ^ `TOP.cpu.sii_l2t2_req[16] ^ `TOP.cpu.sii_l2t2_req[17] ^ `TOP.cpu.sii_l2t2_req[22] ^ `TOP.cpu.sii_l2t2_req[23] ^ `TOP.cpu.sii_l2t2_req[24] ^ `TOP.cpu.sii_l2t2_req[25] ^ `TOP.cpu.sii_l2t2_req[29] ^ `TOP.cpu.sii_l2t2_req[30] ^ `TOP.cpu.sii_l2t2_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t2_req_vld,10))) && ($0in_delay(sii_l2t2_req[24] == 0,10)) && ($0in_delay(sii_l2t2_req[25] == 0,10)) && ($0in_delay(sii_l2t2_req[26] == 1,10)) && ($0in_rising_edge($0in_delay(l2t2_sii_iq_dequeue,10))) && !(sii_wri_ecc2_l2_cycle9 == sii_l2b2_ecc[2]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc2_l2_wri_cycle9
*/

wire sii_wri_ecc3_l2_cycle9 =  (`TOP.cpu.sii_l2t2_req[4] ^ `TOP.cpu.sii_l2t2_req[5] ^ `TOP.cpu.sii_l2t2_req[6] ^ `TOP.cpu.sii_l2t2_req[7] ^ `TOP.cpu.sii_l2t2_req[8] ^ `TOP.cpu.sii_l2t2_req[9] ^ `TOP.cpu.sii_l2t2_req[10] ^ `TOP.cpu.sii_l2t2_req[18] ^ `TOP.cpu.sii_l2t2_req[19] ^ `TOP.cpu.sii_l2t2_req[20] ^ `TOP.cpu.sii_l2t2_req[21] ^ `TOP.cpu.sii_l2t2_req[22] ^ `TOP.cpu.sii_l2t2_req[23] ^ `TOP.cpu.sii_l2t2_req[24] ^ `TOP.cpu.sii_l2t2_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t2_req_vld,10))) && ($0in_delay(sii_l2t2_req[24] == 0,10)) && ($0in_delay(sii_l2t2_req[25] == 0,10)) && ($0in_delay(sii_l2t2_req[26] == 1,10)) && ($0in_rising_edge($0in_delay(l2t2_sii_iq_dequeue,10))) && !(sii_wri_ecc3_l2_cycle9 == sii_l2b2_ecc[3]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc3_l2_wri_cycle9
*/

wire sii_wri_ecc4_l2_cycle9 =  ( `TOP.cpu.sii_l2t2_req[11] ^ `TOP.cpu.sii_l2t2_req[12] ^ `TOP.cpu.sii_l2t2_req[13] ^ `TOP.cpu.sii_l2t2_req[14] ^ `TOP.cpu.sii_l2t2_req[15] ^ `TOP.cpu.sii_l2t2_req[16] ^ `TOP.cpu.sii_l2t2_req[17] ^ `TOP.cpu.sii_l2t2_req[18] ^ `TOP.cpu.sii_l2t2_req[19] ^ `TOP.cpu.sii_l2t2_req[20] ^ `TOP.cpu.sii_l2t2_req[21] ^ `TOP.cpu.sii_l2t2_req[22] ^ `TOP.cpu.sii_l2t2_req[23] ^ `TOP.cpu.sii_l2t2_req[24] ^ `TOP.cpu.sii_l2t2_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t2_req_vld,10))) && ($0in_delay(sii_l2t2_req[24] == 0,10)) && ($0in_delay(sii_l2t2_req[25] == 0,10)) && ($0in_delay(sii_l2t2_req[26] == 1,10)) && ($0in_rising_edge($0in_delay(l2t2_sii_iq_dequeue,10))) && !(sii_wri_ecc4_l2_cycle9 == sii_l2b2_ecc[4]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc4_l2_wri_cycle9
*/

wire sii_wri_ecc5_l2_cycle9 =  (`TOP.cpu.sii_l2t2_req[26] ^ `TOP.cpu.sii_l2t2_req[27] ^ `TOP.cpu.sii_l2t2_req[28] ^ `TOP.cpu.sii_l2t2_req[29] ^ `TOP.cpu.sii_l2t2_req[30] ^ `TOP.cpu.sii_l2t2_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t2_req_vld,10))) && ($0in_delay(sii_l2t2_req[24] == 0,10)) && ($0in_delay(sii_l2t2_req[25] == 0,10)) && ($0in_delay(sii_l2t2_req[26] == 1,10)) && ($0in_rising_edge($0in_delay(l2t2_sii_iq_dequeue,10))) && !(sii_wri_ecc5_l2_cycle9 == sii_l2b2_ecc[5]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc5_l2_wri_cycle9
*/

wire sii_wri_ecc6_l2_cycle9 =  (`TOP.cpu.sii_l2t2_req[0] ^ `TOP.cpu.sii_l2t2_req[1] ^ `TOP.cpu.sii_l2t2_req[2] ^ `TOP.cpu.sii_l2t2_req[4] ^ `TOP.cpu.sii_l2t2_req[5] ^ `TOP.cpu.sii_l2t2_req[7] ^ `TOP.cpu.sii_l2t2_req[10] ^ `TOP.cpu.sii_l2t2_req[11] ^ `TOP.cpu.sii_l2t2_req[12] ^ `TOP.cpu.sii_l2t2_req[14] ^ `TOP.cpu.sii_l2t2_req[17] ^ `TOP.cpu.sii_l2t2_req[18] ^ `TOP.cpu.sii_l2t2_req[21] ^ `TOP.cpu.sii_l2t2_req[23] ^ `TOP.cpu.sii_l2t2_req[24] ^ `TOP.cpu.sii_l2t2_req[26] ^ `TOP.cpu.sii_l2t2_req[27] ^ `TOP.cpu.sii_l2t2_req[29] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t2_req_vld,10))) && ($0in_delay(sii_l2t2_req[24] == 0,10)) && ($0in_delay(sii_l2t2_req[25] == 0,10)) && ($0in_delay(sii_l2t2_req[26] == 1,10)) && ($0in_rising_edge($0in_delay(l2t2_sii_iq_dequeue,10))) && !(sii_wri_ecc6_l2_cycle9 == sii_l2b2_ecc[6]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc6_l2_wri_cycle9
*/

wire sii_wri_ecc0_l2_cycle10 =  (`TOP.cpu.sii_l2t2_req[0] ^ `TOP.cpu.sii_l2t2_req[1] ^ `TOP.cpu.sii_l2t2_req[3] ^ `TOP.cpu.sii_l2t2_req[4] ^ `TOP.cpu.sii_l2t2_req[6] ^ `TOP.cpu.sii_l2t2_req[8] ^ `TOP.cpu.sii_l2t2_req[10] ^ `TOP.cpu.sii_l2t2_req[11] ^ `TOP.cpu.sii_l2t2_req[13] ^ `TOP.cpu.sii_l2t2_req[15] ^ `TOP.cpu.sii_l2t2_req[17] ^ `TOP.cpu.sii_l2t2_req[19] ^ `TOP.cpu.sii_l2t2_req[21] ^ `TOP.cpu.sii_l2t2_req[23] ^ `TOP.cpu.sii_l2t2_req[25] ^ `TOP.cpu.sii_l2t2_req[26] ^ `TOP.cpu.sii_l2t2_req[28] ^ `TOP.cpu.sii_l2t2_req[30] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t2_req_vld,11))) && ($0in_delay(sii_l2t2_req[24] == 0,11)) && ($0in_delay(sii_l2t2_req[25] == 0,11)) && ($0in_delay(sii_l2t2_req[26] == 1,11)) && ($0in_rising_edge($0in_delay(l2t2_sii_iq_dequeue,11))) && !(sii_wri_ecc0_l2_cycle10 == sii_l2b2_ecc[0]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc0_l2_wri_cycle10
*/

wire sii_wri_ecc1_l2_cycle10 =  (`TOP.cpu.sii_l2t2_req[0] ^ `TOP.cpu.sii_l2t2_req[2] ^ `TOP.cpu.sii_l2t2_req[3] ^ `TOP.cpu.sii_l2t2_req[5] ^ `TOP.cpu.sii_l2t2_req[6] ^ `TOP.cpu.sii_l2t2_req[9] ^ `TOP.cpu.sii_l2t2_req[10] ^ `TOP.cpu.sii_l2t2_req[12] ^ `TOP.cpu.sii_l2t2_req[13] ^ `TOP.cpu.sii_l2t2_req[16] ^ `TOP.cpu.sii_l2t2_req[17] ^ `TOP.cpu.sii_l2t2_req[20] ^ `TOP.cpu.sii_l2t2_req[21] ^ `TOP.cpu.sii_l2t2_req[24] ^ `TOP.cpu.sii_l2t2_req[25] ^ `TOP.cpu.sii_l2t2_req[27] ^ `TOP.cpu.sii_l2t2_req[28] ^ `TOP.cpu.sii_l2t2_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t2_req_vld,11))) && ($0in_delay(sii_l2t2_req[24] == 0,11)) && ($0in_delay(sii_l2t2_req[25] == 0,11)) && ($0in_delay(sii_l2t2_req[26] == 1,11)) && ($0in_rising_edge($0in_delay(l2t2_sii_iq_dequeue,11))) && !(sii_wri_ecc1_l2_cycle10 == sii_l2b2_ecc[1]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc1_l2_wri_cycle10
*/

wire sii_wri_ecc2_l2_cycle10 =  (`TOP.cpu.sii_l2t2_req[1] ^ `TOP.cpu.sii_l2t2_req[2] ^ `TOP.cpu.sii_l2t2_req[3] ^ `TOP.cpu.sii_l2t2_req[7] ^ `TOP.cpu.sii_l2t2_req[8] ^ `TOP.cpu.sii_l2t2_req[9] ^ `TOP.cpu.sii_l2t2_req[10] ^ `TOP.cpu.sii_l2t2_req[14] ^ `TOP.cpu.sii_l2t2_req[15] ^ `TOP.cpu.sii_l2t2_req[16] ^ `TOP.cpu.sii_l2t2_req[17] ^ `TOP.cpu.sii_l2t2_req[22] ^ `TOP.cpu.sii_l2t2_req[23] ^ `TOP.cpu.sii_l2t2_req[24] ^ `TOP.cpu.sii_l2t2_req[25] ^ `TOP.cpu.sii_l2t2_req[29] ^ `TOP.cpu.sii_l2t2_req[30] ^ `TOP.cpu.sii_l2t2_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t2_req_vld,11))) && ($0in_delay(sii_l2t2_req[24] == 0,11)) && ($0in_delay(sii_l2t2_req[25] == 0,11)) && ($0in_delay(sii_l2t2_req[26] == 1,11)) && ($0in_rising_edge($0in_delay(l2t2_sii_iq_dequeue,11))) && !(sii_wri_ecc2_l2_cycle10 == sii_l2b2_ecc[2]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc2_l2_wri_cycle10
*/

wire sii_wri_ecc3_l2_cycle10 =  (`TOP.cpu.sii_l2t2_req[4] ^ `TOP.cpu.sii_l2t2_req[5] ^ `TOP.cpu.sii_l2t2_req[6] ^ `TOP.cpu.sii_l2t2_req[7] ^ `TOP.cpu.sii_l2t2_req[8] ^ `TOP.cpu.sii_l2t2_req[9] ^ `TOP.cpu.sii_l2t2_req[10] ^ `TOP.cpu.sii_l2t2_req[18] ^ `TOP.cpu.sii_l2t2_req[19] ^ `TOP.cpu.sii_l2t2_req[20] ^ `TOP.cpu.sii_l2t2_req[21] ^ `TOP.cpu.sii_l2t2_req[22] ^ `TOP.cpu.sii_l2t2_req[23] ^ `TOP.cpu.sii_l2t2_req[24] ^ `TOP.cpu.sii_l2t2_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t2_req_vld,11))) && ($0in_delay(sii_l2t2_req[24] == 0,11)) && ($0in_delay(sii_l2t2_req[25] == 0,11)) && ($0in_delay(sii_l2t2_req[26] == 1,11)) && ($0in_rising_edge($0in_delay(l2t2_sii_iq_dequeue,11))) && !(sii_wri_ecc3_l2_cycle10 == sii_l2b2_ecc[3]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc3_l2_wri_cycle10
*/

wire sii_wri_ecc4_l2_cycle10 =  ( `TOP.cpu.sii_l2t2_req[11] ^ `TOP.cpu.sii_l2t2_req[12] ^ `TOP.cpu.sii_l2t2_req[13] ^ `TOP.cpu.sii_l2t2_req[14] ^ `TOP.cpu.sii_l2t2_req[15] ^ `TOP.cpu.sii_l2t2_req[16] ^ `TOP.cpu.sii_l2t2_req[17] ^ `TOP.cpu.sii_l2t2_req[18] ^ `TOP.cpu.sii_l2t2_req[19] ^ `TOP.cpu.sii_l2t2_req[20] ^ `TOP.cpu.sii_l2t2_req[21] ^ `TOP.cpu.sii_l2t2_req[22] ^ `TOP.cpu.sii_l2t2_req[23] ^ `TOP.cpu.sii_l2t2_req[24] ^ `TOP.cpu.sii_l2t2_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t2_req_vld,11))) && ($0in_delay(sii_l2t2_req[24] == 0,11)) && ($0in_delay(sii_l2t2_req[25] == 0,11)) && ($0in_delay(sii_l2t2_req[26] == 1,11)) && ($0in_rising_edge($0in_delay(l2t2_sii_iq_dequeue,11))) && !(sii_wri_ecc4_l2_cycle10 == sii_l2b2_ecc[4]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc4_l2_wri_cycle10
*/

wire sii_wri_ecc5_l2_cycle10 =  (`TOP.cpu.sii_l2t2_req[26] ^ `TOP.cpu.sii_l2t2_req[27] ^ `TOP.cpu.sii_l2t2_req[28] ^ `TOP.cpu.sii_l2t2_req[29] ^ `TOP.cpu.sii_l2t2_req[30] ^ `TOP.cpu.sii_l2t2_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t2_req_vld,11))) && ($0in_delay(sii_l2t2_req[24] == 0,11)) && ($0in_delay(sii_l2t2_req[25] == 0,11)) && ($0in_delay(sii_l2t2_req[26] == 1,11)) && ($0in_rising_edge($0in_delay(l2t2_sii_iq_dequeue,11))) && !(sii_wri_ecc5_l2_cycle10 == sii_l2b2_ecc[5]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc5_l2_wri_cycle10
*/

wire sii_wri_ecc6_l2_cycle10 =  (`TOP.cpu.sii_l2t2_req[0] ^ `TOP.cpu.sii_l2t2_req[1] ^ `TOP.cpu.sii_l2t2_req[2] ^ `TOP.cpu.sii_l2t2_req[4] ^ `TOP.cpu.sii_l2t2_req[5] ^ `TOP.cpu.sii_l2t2_req[7] ^ `TOP.cpu.sii_l2t2_req[10] ^ `TOP.cpu.sii_l2t2_req[11] ^ `TOP.cpu.sii_l2t2_req[12] ^ `TOP.cpu.sii_l2t2_req[14] ^ `TOP.cpu.sii_l2t2_req[17] ^ `TOP.cpu.sii_l2t2_req[18] ^ `TOP.cpu.sii_l2t2_req[21] ^ `TOP.cpu.sii_l2t2_req[23] ^ `TOP.cpu.sii_l2t2_req[24] ^ `TOP.cpu.sii_l2t2_req[26] ^ `TOP.cpu.sii_l2t2_req[27] ^ `TOP.cpu.sii_l2t2_req[29] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t2_req_vld,11))) && ($0in_delay(sii_l2t2_req[24] == 0,11)) && ($0in_delay(sii_l2t2_req[25] == 0,11)) && ($0in_delay(sii_l2t2_req[26] == 1,11)) && ($0in_rising_edge($0in_delay(l2t2_sii_iq_dequeue,11))) && !(sii_wri_ecc6_l2_cycle10 == sii_l2b2_ecc[6]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc6_l2_wri_cycle10
*/

wire sii_wri_ecc0_l2_cycle11 =  (`TOP.cpu.sii_l2t2_req[0] ^ `TOP.cpu.sii_l2t2_req[1] ^ `TOP.cpu.sii_l2t2_req[3] ^ `TOP.cpu.sii_l2t2_req[4] ^ `TOP.cpu.sii_l2t2_req[6] ^ `TOP.cpu.sii_l2t2_req[8] ^ `TOP.cpu.sii_l2t2_req[10] ^ `TOP.cpu.sii_l2t2_req[11] ^ `TOP.cpu.sii_l2t2_req[13] ^ `TOP.cpu.sii_l2t2_req[15] ^ `TOP.cpu.sii_l2t2_req[17] ^ `TOP.cpu.sii_l2t2_req[19] ^ `TOP.cpu.sii_l2t2_req[21] ^ `TOP.cpu.sii_l2t2_req[23] ^ `TOP.cpu.sii_l2t2_req[25] ^ `TOP.cpu.sii_l2t2_req[26] ^ `TOP.cpu.sii_l2t2_req[28] ^ `TOP.cpu.sii_l2t2_req[30] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t2_req_vld,12))) && ($0in_delay(sii_l2t2_req[24] == 0,12)) && ($0in_delay(sii_l2t2_req[25] == 0,12)) && ($0in_delay(sii_l2t2_req[26] == 1,12)) && ($0in_rising_edge($0in_delay(l2t2_sii_iq_dequeue,12))) && !(sii_wri_ecc0_l2_cycle11 == sii_l2b2_ecc[0]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc0_l2_wri_cycle11
*/

wire sii_wri_ecc1_l2_cycle11 =  (`TOP.cpu.sii_l2t2_req[0] ^ `TOP.cpu.sii_l2t2_req[2] ^ `TOP.cpu.sii_l2t2_req[3] ^ `TOP.cpu.sii_l2t2_req[5] ^ `TOP.cpu.sii_l2t2_req[6] ^ `TOP.cpu.sii_l2t2_req[9] ^ `TOP.cpu.sii_l2t2_req[10] ^ `TOP.cpu.sii_l2t2_req[12] ^ `TOP.cpu.sii_l2t2_req[13] ^ `TOP.cpu.sii_l2t2_req[16] ^ `TOP.cpu.sii_l2t2_req[17] ^ `TOP.cpu.sii_l2t2_req[20] ^ `TOP.cpu.sii_l2t2_req[21] ^ `TOP.cpu.sii_l2t2_req[24] ^ `TOP.cpu.sii_l2t2_req[25] ^ `TOP.cpu.sii_l2t2_req[27] ^ `TOP.cpu.sii_l2t2_req[28] ^ `TOP.cpu.sii_l2t2_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t2_req_vld,12))) && ($0in_delay(sii_l2t2_req[24] == 0,12)) && ($0in_delay(sii_l2t2_req[25] == 0,12)) && ($0in_delay(sii_l2t2_req[26] == 1,12)) && ($0in_rising_edge($0in_delay(l2t2_sii_iq_dequeue,12))) && !(sii_wri_ecc1_l2_cycle11 == sii_l2b2_ecc[1]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc1_l2_wri_cycle11
*/

wire sii_wri_ecc2_l2_cycle11 =  (`TOP.cpu.sii_l2t2_req[1] ^ `TOP.cpu.sii_l2t2_req[2] ^ `TOP.cpu.sii_l2t2_req[3] ^ `TOP.cpu.sii_l2t2_req[7] ^ `TOP.cpu.sii_l2t2_req[8] ^ `TOP.cpu.sii_l2t2_req[9] ^ `TOP.cpu.sii_l2t2_req[10] ^ `TOP.cpu.sii_l2t2_req[14] ^ `TOP.cpu.sii_l2t2_req[15] ^ `TOP.cpu.sii_l2t2_req[16] ^ `TOP.cpu.sii_l2t2_req[17] ^ `TOP.cpu.sii_l2t2_req[22] ^ `TOP.cpu.sii_l2t2_req[23] ^ `TOP.cpu.sii_l2t2_req[24] ^ `TOP.cpu.sii_l2t2_req[25] ^ `TOP.cpu.sii_l2t2_req[29] ^ `TOP.cpu.sii_l2t2_req[30] ^ `TOP.cpu.sii_l2t2_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t2_req_vld,12))) && ($0in_delay(sii_l2t2_req[24] == 0,12)) && ($0in_delay(sii_l2t2_req[25] == 0,12)) && ($0in_delay(sii_l2t2_req[26] == 1,12)) && ($0in_rising_edge($0in_delay(l2t2_sii_iq_dequeue,12))) && !(sii_wri_ecc2_l2_cycle11 == sii_l2b2_ecc[2]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc2_l2_wri_cycle11
*/

wire sii_wri_ecc3_l2_cycle11 =  (`TOP.cpu.sii_l2t2_req[4] ^ `TOP.cpu.sii_l2t2_req[5] ^ `TOP.cpu.sii_l2t2_req[6] ^ `TOP.cpu.sii_l2t2_req[7] ^ `TOP.cpu.sii_l2t2_req[8] ^ `TOP.cpu.sii_l2t2_req[9] ^ `TOP.cpu.sii_l2t2_req[10] ^ `TOP.cpu.sii_l2t2_req[18] ^ `TOP.cpu.sii_l2t2_req[19] ^ `TOP.cpu.sii_l2t2_req[20] ^ `TOP.cpu.sii_l2t2_req[21] ^ `TOP.cpu.sii_l2t2_req[22] ^ `TOP.cpu.sii_l2t2_req[23] ^ `TOP.cpu.sii_l2t2_req[24] ^ `TOP.cpu.sii_l2t2_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t2_req_vld,12))) && ($0in_delay(sii_l2t2_req[24] == 0,12)) && ($0in_delay(sii_l2t2_req[25] == 0,12)) && ($0in_delay(sii_l2t2_req[26] == 1,12)) && ($0in_rising_edge($0in_delay(l2t2_sii_iq_dequeue,12))) && !(sii_wri_ecc3_l2_cycle11 == sii_l2b2_ecc[3]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc3_l2_wri_cycle11
*/

wire sii_wri_ecc4_l2_cycle11 =  ( `TOP.cpu.sii_l2t2_req[11] ^ `TOP.cpu.sii_l2t2_req[12] ^ `TOP.cpu.sii_l2t2_req[13] ^ `TOP.cpu.sii_l2t2_req[14] ^ `TOP.cpu.sii_l2t2_req[15] ^ `TOP.cpu.sii_l2t2_req[16] ^ `TOP.cpu.sii_l2t2_req[17] ^ `TOP.cpu.sii_l2t2_req[18] ^ `TOP.cpu.sii_l2t2_req[19] ^ `TOP.cpu.sii_l2t2_req[20] ^ `TOP.cpu.sii_l2t2_req[21] ^ `TOP.cpu.sii_l2t2_req[22] ^ `TOP.cpu.sii_l2t2_req[23] ^ `TOP.cpu.sii_l2t2_req[24] ^ `TOP.cpu.sii_l2t2_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t2_req_vld,12))) && ($0in_delay(sii_l2t2_req[24] == 0,12)) && ($0in_delay(sii_l2t2_req[25] == 0,12)) && ($0in_delay(sii_l2t2_req[26] == 1,12)) && ($0in_rising_edge($0in_delay(l2t2_sii_iq_dequeue,12))) && !(sii_wri_ecc4_l2_cycle11 == sii_l2b2_ecc[4]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc4_l2_wri_cycle11
*/

wire sii_wri_ecc5_l2_cycle11 =  (`TOP.cpu.sii_l2t2_req[26] ^ `TOP.cpu.sii_l2t2_req[27] ^ `TOP.cpu.sii_l2t2_req[28] ^ `TOP.cpu.sii_l2t2_req[29] ^ `TOP.cpu.sii_l2t2_req[30] ^ `TOP.cpu.sii_l2t2_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t2_req_vld,12))) && ($0in_delay(sii_l2t2_req[24] == 0,12)) && ($0in_delay(sii_l2t2_req[25] == 0,12)) && ($0in_delay(sii_l2t2_req[26] == 1,12)) && ($0in_rising_edge($0in_delay(l2t2_sii_iq_dequeue,12))) && !(sii_wri_ecc5_l2_cycle11 == sii_l2b2_ecc[5]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc5_l2_wri_cycle11
*/

wire sii_wri_ecc6_l2_cycle11 =  (`TOP.cpu.sii_l2t2_req[0] ^ `TOP.cpu.sii_l2t2_req[1] ^ `TOP.cpu.sii_l2t2_req[2] ^ `TOP.cpu.sii_l2t2_req[4] ^ `TOP.cpu.sii_l2t2_req[5] ^ `TOP.cpu.sii_l2t2_req[7] ^ `TOP.cpu.sii_l2t2_req[10] ^ `TOP.cpu.sii_l2t2_req[11] ^ `TOP.cpu.sii_l2t2_req[12] ^ `TOP.cpu.sii_l2t2_req[14] ^ `TOP.cpu.sii_l2t2_req[17] ^ `TOP.cpu.sii_l2t2_req[18] ^ `TOP.cpu.sii_l2t2_req[21] ^ `TOP.cpu.sii_l2t2_req[23] ^ `TOP.cpu.sii_l2t2_req[24] ^ `TOP.cpu.sii_l2t2_req[26] ^ `TOP.cpu.sii_l2t2_req[27] ^ `TOP.cpu.sii_l2t2_req[29] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t2_req_vld,12))) && ($0in_delay(sii_l2t2_req[24] == 0,12)) && ($0in_delay(sii_l2t2_req[25] == 0,12)) && ($0in_delay(sii_l2t2_req[26] == 1,12)) && ($0in_rising_edge($0in_delay(l2t2_sii_iq_dequeue,12))) && !(sii_wri_ecc6_l2_cycle11 == sii_l2b2_ecc[6]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc6_l2_wri_cycle11
*/

wire sii_wri_ecc0_l2_cycle12 =  (`TOP.cpu.sii_l2t2_req[0] ^ `TOP.cpu.sii_l2t2_req[1] ^ `TOP.cpu.sii_l2t2_req[3] ^ `TOP.cpu.sii_l2t2_req[4] ^ `TOP.cpu.sii_l2t2_req[6] ^ `TOP.cpu.sii_l2t2_req[8] ^ `TOP.cpu.sii_l2t2_req[10] ^ `TOP.cpu.sii_l2t2_req[11] ^ `TOP.cpu.sii_l2t2_req[13] ^ `TOP.cpu.sii_l2t2_req[15] ^ `TOP.cpu.sii_l2t2_req[17] ^ `TOP.cpu.sii_l2t2_req[19] ^ `TOP.cpu.sii_l2t2_req[21] ^ `TOP.cpu.sii_l2t2_req[23] ^ `TOP.cpu.sii_l2t2_req[25] ^ `TOP.cpu.sii_l2t2_req[26] ^ `TOP.cpu.sii_l2t2_req[28] ^ `TOP.cpu.sii_l2t2_req[30] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t2_req_vld,13))) && ($0in_delay(sii_l2t2_req[24] == 0,13)) && ($0in_delay(sii_l2t2_req[25] == 0,13)) && ($0in_delay(sii_l2t2_req[26] == 1,13)) && ($0in_rising_edge($0in_delay(l2t2_sii_iq_dequeue,13))) && !(sii_wri_ecc0_l2_cycle12 == sii_l2b2_ecc[0]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc0_l2_wri_cycle12
*/

wire sii_wri_ecc1_l2_cycle12 =  (`TOP.cpu.sii_l2t2_req[0] ^ `TOP.cpu.sii_l2t2_req[2] ^ `TOP.cpu.sii_l2t2_req[3] ^ `TOP.cpu.sii_l2t2_req[5] ^ `TOP.cpu.sii_l2t2_req[6] ^ `TOP.cpu.sii_l2t2_req[9] ^ `TOP.cpu.sii_l2t2_req[10] ^ `TOP.cpu.sii_l2t2_req[12] ^ `TOP.cpu.sii_l2t2_req[13] ^ `TOP.cpu.sii_l2t2_req[16] ^ `TOP.cpu.sii_l2t2_req[17] ^ `TOP.cpu.sii_l2t2_req[20] ^ `TOP.cpu.sii_l2t2_req[21] ^ `TOP.cpu.sii_l2t2_req[24] ^ `TOP.cpu.sii_l2t2_req[25] ^ `TOP.cpu.sii_l2t2_req[27] ^ `TOP.cpu.sii_l2t2_req[28] ^ `TOP.cpu.sii_l2t2_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t2_req_vld,13))) && ($0in_delay(sii_l2t2_req[24] == 0,13)) && ($0in_delay(sii_l2t2_req[25] == 0,13)) && ($0in_delay(sii_l2t2_req[26] == 1,13)) && ($0in_rising_edge($0in_delay(l2t2_sii_iq_dequeue,13))) && !(sii_wri_ecc1_l2_cycle12 == sii_l2b2_ecc[1]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc1_l2_wri_cycle12
*/

wire sii_wri_ecc2_l2_cycle12 =  (`TOP.cpu.sii_l2t2_req[1] ^ `TOP.cpu.sii_l2t2_req[2] ^ `TOP.cpu.sii_l2t2_req[3] ^ `TOP.cpu.sii_l2t2_req[7] ^ `TOP.cpu.sii_l2t2_req[8] ^ `TOP.cpu.sii_l2t2_req[9] ^ `TOP.cpu.sii_l2t2_req[10] ^ `TOP.cpu.sii_l2t2_req[14] ^ `TOP.cpu.sii_l2t2_req[15] ^ `TOP.cpu.sii_l2t2_req[16] ^ `TOP.cpu.sii_l2t2_req[17] ^ `TOP.cpu.sii_l2t2_req[22] ^ `TOP.cpu.sii_l2t2_req[23] ^ `TOP.cpu.sii_l2t2_req[24] ^ `TOP.cpu.sii_l2t2_req[25] ^ `TOP.cpu.sii_l2t2_req[29] ^ `TOP.cpu.sii_l2t2_req[30] ^ `TOP.cpu.sii_l2t2_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t2_req_vld,13))) && ($0in_delay(sii_l2t2_req[24] == 0,13)) && ($0in_delay(sii_l2t2_req[25] == 0,13)) && ($0in_delay(sii_l2t2_req[26] == 1,13)) && ($0in_rising_edge($0in_delay(l2t2_sii_iq_dequeue,13))) && !(sii_wri_ecc2_l2_cycle12 == sii_l2b2_ecc[2]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc2_l2_wri_cycle12
*/

wire sii_wri_ecc3_l2_cycle12 =  (`TOP.cpu.sii_l2t2_req[4] ^ `TOP.cpu.sii_l2t2_req[5] ^ `TOP.cpu.sii_l2t2_req[6] ^ `TOP.cpu.sii_l2t2_req[7] ^ `TOP.cpu.sii_l2t2_req[8] ^ `TOP.cpu.sii_l2t2_req[9] ^ `TOP.cpu.sii_l2t2_req[10] ^ `TOP.cpu.sii_l2t2_req[18] ^ `TOP.cpu.sii_l2t2_req[19] ^ `TOP.cpu.sii_l2t2_req[20] ^ `TOP.cpu.sii_l2t2_req[21] ^ `TOP.cpu.sii_l2t2_req[22] ^ `TOP.cpu.sii_l2t2_req[23] ^ `TOP.cpu.sii_l2t2_req[24] ^ `TOP.cpu.sii_l2t2_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t2_req_vld,13))) && ($0in_delay(sii_l2t2_req[24] == 0,13)) && ($0in_delay(sii_l2t2_req[25] == 0,13)) && ($0in_delay(sii_l2t2_req[26] == 1,13)) && ($0in_rising_edge($0in_delay(l2t2_sii_iq_dequeue,13))) && !(sii_wri_ecc3_l2_cycle12 == sii_l2b2_ecc[3]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc3_l2_wri_cycle12
*/

wire sii_wri_ecc4_l2_cycle12 =  ( `TOP.cpu.sii_l2t2_req[11] ^ `TOP.cpu.sii_l2t2_req[12] ^ `TOP.cpu.sii_l2t2_req[13] ^ `TOP.cpu.sii_l2t2_req[14] ^ `TOP.cpu.sii_l2t2_req[15] ^ `TOP.cpu.sii_l2t2_req[16] ^ `TOP.cpu.sii_l2t2_req[17] ^ `TOP.cpu.sii_l2t2_req[18] ^ `TOP.cpu.sii_l2t2_req[19] ^ `TOP.cpu.sii_l2t2_req[20] ^ `TOP.cpu.sii_l2t2_req[21] ^ `TOP.cpu.sii_l2t2_req[22] ^ `TOP.cpu.sii_l2t2_req[23] ^ `TOP.cpu.sii_l2t2_req[24] ^ `TOP.cpu.sii_l2t2_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t2_req_vld,13))) && ($0in_delay(sii_l2t2_req[24] == 0,13)) && ($0in_delay(sii_l2t2_req[25] == 0,13)) && ($0in_delay(sii_l2t2_req[26] == 1,13)) && ($0in_rising_edge($0in_delay(l2t2_sii_iq_dequeue,13))) && !(sii_wri_ecc4_l2_cycle12 == sii_l2b2_ecc[4]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc4_l2_wri_cycle12
*/

wire sii_wri_ecc5_l2_cycle12 =  (`TOP.cpu.sii_l2t2_req[26] ^ `TOP.cpu.sii_l2t2_req[27] ^ `TOP.cpu.sii_l2t2_req[28] ^ `TOP.cpu.sii_l2t2_req[29] ^ `TOP.cpu.sii_l2t2_req[30] ^ `TOP.cpu.sii_l2t2_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t2_req_vld,13))) && ($0in_delay(sii_l2t2_req[24] == 0,13)) && ($0in_delay(sii_l2t2_req[25] == 0,13)) && ($0in_delay(sii_l2t2_req[26] == 1,13)) && ($0in_rising_edge($0in_delay(l2t2_sii_iq_dequeue,13))) && !(sii_wri_ecc5_l2_cycle12 == sii_l2b2_ecc[5]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc5_l2_wri_cycle12
*/

wire sii_wri_ecc6_l2_cycle12 =  (`TOP.cpu.sii_l2t2_req[0] ^ `TOP.cpu.sii_l2t2_req[1] ^ `TOP.cpu.sii_l2t2_req[2] ^ `TOP.cpu.sii_l2t2_req[4] ^ `TOP.cpu.sii_l2t2_req[5] ^ `TOP.cpu.sii_l2t2_req[7] ^ `TOP.cpu.sii_l2t2_req[10] ^ `TOP.cpu.sii_l2t2_req[11] ^ `TOP.cpu.sii_l2t2_req[12] ^ `TOP.cpu.sii_l2t2_req[14] ^ `TOP.cpu.sii_l2t2_req[17] ^ `TOP.cpu.sii_l2t2_req[18] ^ `TOP.cpu.sii_l2t2_req[21] ^ `TOP.cpu.sii_l2t2_req[23] ^ `TOP.cpu.sii_l2t2_req[24] ^ `TOP.cpu.sii_l2t2_req[26] ^ `TOP.cpu.sii_l2t2_req[27] ^ `TOP.cpu.sii_l2t2_req[29] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t2_req_vld,13))) && ($0in_delay(sii_l2t2_req[24] == 0,13)) && ($0in_delay(sii_l2t2_req[25] == 0,13)) && ($0in_delay(sii_l2t2_req[26] == 1,13)) && ($0in_rising_edge($0in_delay(l2t2_sii_iq_dequeue,13))) && !(sii_wri_ecc6_l2_cycle12 == sii_l2b2_ecc[6]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc6_l2_wri_cycle12
*/

wire sii_wri_ecc0_l2_cycle13 =  (`TOP.cpu.sii_l2t2_req[0] ^ `TOP.cpu.sii_l2t2_req[1] ^ `TOP.cpu.sii_l2t2_req[3] ^ `TOP.cpu.sii_l2t2_req[4] ^ `TOP.cpu.sii_l2t2_req[6] ^ `TOP.cpu.sii_l2t2_req[8] ^ `TOP.cpu.sii_l2t2_req[10] ^ `TOP.cpu.sii_l2t2_req[11] ^ `TOP.cpu.sii_l2t2_req[13] ^ `TOP.cpu.sii_l2t2_req[15] ^ `TOP.cpu.sii_l2t2_req[17] ^ `TOP.cpu.sii_l2t2_req[19] ^ `TOP.cpu.sii_l2t2_req[21] ^ `TOP.cpu.sii_l2t2_req[23] ^ `TOP.cpu.sii_l2t2_req[25] ^ `TOP.cpu.sii_l2t2_req[26] ^ `TOP.cpu.sii_l2t2_req[28] ^ `TOP.cpu.sii_l2t2_req[30] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t2_req_vld,14))) && ($0in_delay(sii_l2t2_req[24] == 0,14)) && ($0in_delay(sii_l2t2_req[25] == 0,14)) && ($0in_delay(sii_l2t2_req[26] == 1,14)) && ($0in_rising_edge($0in_delay(l2t2_sii_iq_dequeue,14))) && !(sii_wri_ecc0_l2_cycle13 == sii_l2b2_ecc[0]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc0_l2_wri_cycle13
*/

wire sii_wri_ecc1_l2_cycle13 =  (`TOP.cpu.sii_l2t2_req[0] ^ `TOP.cpu.sii_l2t2_req[2] ^ `TOP.cpu.sii_l2t2_req[3] ^ `TOP.cpu.sii_l2t2_req[5] ^ `TOP.cpu.sii_l2t2_req[6] ^ `TOP.cpu.sii_l2t2_req[9] ^ `TOP.cpu.sii_l2t2_req[10] ^ `TOP.cpu.sii_l2t2_req[12] ^ `TOP.cpu.sii_l2t2_req[13] ^ `TOP.cpu.sii_l2t2_req[16] ^ `TOP.cpu.sii_l2t2_req[17] ^ `TOP.cpu.sii_l2t2_req[20] ^ `TOP.cpu.sii_l2t2_req[21] ^ `TOP.cpu.sii_l2t2_req[24] ^ `TOP.cpu.sii_l2t2_req[25] ^ `TOP.cpu.sii_l2t2_req[27] ^ `TOP.cpu.sii_l2t2_req[28] ^ `TOP.cpu.sii_l2t2_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t2_req_vld,14))) && ($0in_delay(sii_l2t2_req[24] == 0,14)) && ($0in_delay(sii_l2t2_req[25] == 0,14)) && ($0in_delay(sii_l2t2_req[26] == 1,14)) && ($0in_rising_edge($0in_delay(l2t2_sii_iq_dequeue,14))) && !(sii_wri_ecc1_l2_cycle13 == sii_l2b2_ecc[1]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc1_l2_wri_cycle13
*/

wire sii_wri_ecc2_l2_cycle13 =  (`TOP.cpu.sii_l2t2_req[1] ^ `TOP.cpu.sii_l2t2_req[2] ^ `TOP.cpu.sii_l2t2_req[3] ^ `TOP.cpu.sii_l2t2_req[7] ^ `TOP.cpu.sii_l2t2_req[8] ^ `TOP.cpu.sii_l2t2_req[9] ^ `TOP.cpu.sii_l2t2_req[10] ^ `TOP.cpu.sii_l2t2_req[14] ^ `TOP.cpu.sii_l2t2_req[15] ^ `TOP.cpu.sii_l2t2_req[16] ^ `TOP.cpu.sii_l2t2_req[17] ^ `TOP.cpu.sii_l2t2_req[22] ^ `TOP.cpu.sii_l2t2_req[23] ^ `TOP.cpu.sii_l2t2_req[24] ^ `TOP.cpu.sii_l2t2_req[25] ^ `TOP.cpu.sii_l2t2_req[29] ^ `TOP.cpu.sii_l2t2_req[30] ^ `TOP.cpu.sii_l2t2_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t2_req_vld,14))) && ($0in_delay(sii_l2t2_req[24] == 0,14)) && ($0in_delay(sii_l2t2_req[25] == 0,14)) && ($0in_delay(sii_l2t2_req[26] == 1,14)) && ($0in_rising_edge($0in_delay(l2t2_sii_iq_dequeue,14))) && !(sii_wri_ecc2_l2_cycle13 == sii_l2b2_ecc[2]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc2_l2_wri_cycle13
*/

wire sii_wri_ecc3_l2_cycle13 =  (`TOP.cpu.sii_l2t2_req[4] ^ `TOP.cpu.sii_l2t2_req[5] ^ `TOP.cpu.sii_l2t2_req[6] ^ `TOP.cpu.sii_l2t2_req[7] ^ `TOP.cpu.sii_l2t2_req[8] ^ `TOP.cpu.sii_l2t2_req[9] ^ `TOP.cpu.sii_l2t2_req[10] ^ `TOP.cpu.sii_l2t2_req[18] ^ `TOP.cpu.sii_l2t2_req[19] ^ `TOP.cpu.sii_l2t2_req[20] ^ `TOP.cpu.sii_l2t2_req[21] ^ `TOP.cpu.sii_l2t2_req[22] ^ `TOP.cpu.sii_l2t2_req[23] ^ `TOP.cpu.sii_l2t2_req[24] ^ `TOP.cpu.sii_l2t2_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t2_req_vld,14))) && ($0in_delay(sii_l2t2_req[24] == 0,14)) && ($0in_delay(sii_l2t2_req[25] == 0,14)) && ($0in_delay(sii_l2t2_req[26] == 1,14)) && ($0in_rising_edge($0in_delay(l2t2_sii_iq_dequeue,14))) && !(sii_wri_ecc3_l2_cycle13 == sii_l2b2_ecc[3]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc3_l2_wri_cycle13
*/

wire sii_wri_ecc4_l2_cycle13 =  ( `TOP.cpu.sii_l2t2_req[11] ^ `TOP.cpu.sii_l2t2_req[12] ^ `TOP.cpu.sii_l2t2_req[13] ^ `TOP.cpu.sii_l2t2_req[14] ^ `TOP.cpu.sii_l2t2_req[15] ^ `TOP.cpu.sii_l2t2_req[16] ^ `TOP.cpu.sii_l2t2_req[17] ^ `TOP.cpu.sii_l2t2_req[18] ^ `TOP.cpu.sii_l2t2_req[19] ^ `TOP.cpu.sii_l2t2_req[20] ^ `TOP.cpu.sii_l2t2_req[21] ^ `TOP.cpu.sii_l2t2_req[22] ^ `TOP.cpu.sii_l2t2_req[23] ^ `TOP.cpu.sii_l2t2_req[24] ^ `TOP.cpu.sii_l2t2_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t2_req_vld,14))) && ($0in_delay(sii_l2t2_req[24] == 0,14)) && ($0in_delay(sii_l2t2_req[25] == 0,14)) && ($0in_delay(sii_l2t2_req[26] == 1,14)) && ($0in_rising_edge($0in_delay(l2t2_sii_iq_dequeue,14))) && !(sii_wri_ecc4_l2_cycle13 == sii_l2b2_ecc[4]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc4_l2_wri_cycle13
*/

wire sii_wri_ecc5_l2_cycle13 =  (`TOP.cpu.sii_l2t2_req[26] ^ `TOP.cpu.sii_l2t2_req[27] ^ `TOP.cpu.sii_l2t2_req[28] ^ `TOP.cpu.sii_l2t2_req[29] ^ `TOP.cpu.sii_l2t2_req[30] ^ `TOP.cpu.sii_l2t2_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t2_req_vld,14))) && ($0in_delay(sii_l2t2_req[24] == 0,14)) && ($0in_delay(sii_l2t2_req[25] == 0,14)) && ($0in_delay(sii_l2t2_req[26] == 1,14)) && ($0in_rising_edge($0in_delay(l2t2_sii_iq_dequeue,14))) && !(sii_wri_ecc5_l2_cycle13 == sii_l2b2_ecc[5]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc5_l2_wri_cycle13
*/

wire sii_wri_ecc6_l2_cycle13 =  (`TOP.cpu.sii_l2t2_req[0] ^ `TOP.cpu.sii_l2t2_req[1] ^ `TOP.cpu.sii_l2t2_req[2] ^ `TOP.cpu.sii_l2t2_req[4] ^ `TOP.cpu.sii_l2t2_req[5] ^ `TOP.cpu.sii_l2t2_req[7] ^ `TOP.cpu.sii_l2t2_req[10] ^ `TOP.cpu.sii_l2t2_req[11] ^ `TOP.cpu.sii_l2t2_req[12] ^ `TOP.cpu.sii_l2t2_req[14] ^ `TOP.cpu.sii_l2t2_req[17] ^ `TOP.cpu.sii_l2t2_req[18] ^ `TOP.cpu.sii_l2t2_req[21] ^ `TOP.cpu.sii_l2t2_req[23] ^ `TOP.cpu.sii_l2t2_req[24] ^ `TOP.cpu.sii_l2t2_req[26] ^ `TOP.cpu.sii_l2t2_req[27] ^ `TOP.cpu.sii_l2t2_req[29] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t2_req_vld,14))) && ($0in_delay(sii_l2t2_req[24] == 0,14)) && ($0in_delay(sii_l2t2_req[25] == 0,14)) && ($0in_delay(sii_l2t2_req[26] == 1,14)) && ($0in_rising_edge($0in_delay(l2t2_sii_iq_dequeue,14))) && !(sii_wri_ecc6_l2_cycle13 == sii_l2b2_ecc[6]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc6_l2_wri_cycle13
*/

wire sii_wri_ecc0_l2_cycle14 =  (`TOP.cpu.sii_l2t2_req[0] ^ `TOP.cpu.sii_l2t2_req[1] ^ `TOP.cpu.sii_l2t2_req[3] ^ `TOP.cpu.sii_l2t2_req[4] ^ `TOP.cpu.sii_l2t2_req[6] ^ `TOP.cpu.sii_l2t2_req[8] ^ `TOP.cpu.sii_l2t2_req[10] ^ `TOP.cpu.sii_l2t2_req[11] ^ `TOP.cpu.sii_l2t2_req[13] ^ `TOP.cpu.sii_l2t2_req[15] ^ `TOP.cpu.sii_l2t2_req[17] ^ `TOP.cpu.sii_l2t2_req[19] ^ `TOP.cpu.sii_l2t2_req[21] ^ `TOP.cpu.sii_l2t2_req[23] ^ `TOP.cpu.sii_l2t2_req[25] ^ `TOP.cpu.sii_l2t2_req[26] ^ `TOP.cpu.sii_l2t2_req[28] ^ `TOP.cpu.sii_l2t2_req[30] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t2_req_vld,15))) && ($0in_delay(sii_l2t2_req[24] == 0,15)) && ($0in_delay(sii_l2t2_req[25] == 0,15)) && ($0in_delay(sii_l2t2_req[26] == 1,15)) && ($0in_rising_edge($0in_delay(l2t2_sii_iq_dequeue,15))) && !(sii_wri_ecc0_l2_cycle14 == sii_l2b2_ecc[0]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc0_l2_wri_cycle14
*/

wire sii_wri_ecc1_l2_cycle14 =  (`TOP.cpu.sii_l2t2_req[0] ^ `TOP.cpu.sii_l2t2_req[2] ^ `TOP.cpu.sii_l2t2_req[3] ^ `TOP.cpu.sii_l2t2_req[5] ^ `TOP.cpu.sii_l2t2_req[6] ^ `TOP.cpu.sii_l2t2_req[9] ^ `TOP.cpu.sii_l2t2_req[10] ^ `TOP.cpu.sii_l2t2_req[12] ^ `TOP.cpu.sii_l2t2_req[13] ^ `TOP.cpu.sii_l2t2_req[16] ^ `TOP.cpu.sii_l2t2_req[17] ^ `TOP.cpu.sii_l2t2_req[20] ^ `TOP.cpu.sii_l2t2_req[21] ^ `TOP.cpu.sii_l2t2_req[24] ^ `TOP.cpu.sii_l2t2_req[25] ^ `TOP.cpu.sii_l2t2_req[27] ^ `TOP.cpu.sii_l2t2_req[28] ^ `TOP.cpu.sii_l2t2_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t2_req_vld,15))) && ($0in_delay(sii_l2t2_req[24] == 0,15)) && ($0in_delay(sii_l2t2_req[25] == 0,15)) && ($0in_delay(sii_l2t2_req[26] == 1,15)) && ($0in_rising_edge($0in_delay(l2t2_sii_iq_dequeue,15))) && !(sii_wri_ecc1_l2_cycle14 == sii_l2b2_ecc[1]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc1_l2_wri_cycle14
*/

wire sii_wri_ecc2_l2_cycle14 =  (`TOP.cpu.sii_l2t2_req[1] ^ `TOP.cpu.sii_l2t2_req[2] ^ `TOP.cpu.sii_l2t2_req[3] ^ `TOP.cpu.sii_l2t2_req[7] ^ `TOP.cpu.sii_l2t2_req[8] ^ `TOP.cpu.sii_l2t2_req[9] ^ `TOP.cpu.sii_l2t2_req[10] ^ `TOP.cpu.sii_l2t2_req[14] ^ `TOP.cpu.sii_l2t2_req[15] ^ `TOP.cpu.sii_l2t2_req[16] ^ `TOP.cpu.sii_l2t2_req[17] ^ `TOP.cpu.sii_l2t2_req[22] ^ `TOP.cpu.sii_l2t2_req[23] ^ `TOP.cpu.sii_l2t2_req[24] ^ `TOP.cpu.sii_l2t2_req[25] ^ `TOP.cpu.sii_l2t2_req[29] ^ `TOP.cpu.sii_l2t2_req[30] ^ `TOP.cpu.sii_l2t2_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t2_req_vld,15))) && ($0in_delay(sii_l2t2_req[24] == 0,15)) && ($0in_delay(sii_l2t2_req[25] == 0,15)) && ($0in_delay(sii_l2t2_req[26] == 1,15)) && ($0in_rising_edge($0in_delay(l2t2_sii_iq_dequeue,15))) && !(sii_wri_ecc2_l2_cycle14 == sii_l2b2_ecc[2]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc2_l2_wri_cycle14
*/

wire sii_wri_ecc3_l2_cycle14 =  (`TOP.cpu.sii_l2t2_req[4] ^ `TOP.cpu.sii_l2t2_req[5] ^ `TOP.cpu.sii_l2t2_req[6] ^ `TOP.cpu.sii_l2t2_req[7] ^ `TOP.cpu.sii_l2t2_req[8] ^ `TOP.cpu.sii_l2t2_req[9] ^ `TOP.cpu.sii_l2t2_req[10] ^ `TOP.cpu.sii_l2t2_req[18] ^ `TOP.cpu.sii_l2t2_req[19] ^ `TOP.cpu.sii_l2t2_req[20] ^ `TOP.cpu.sii_l2t2_req[21] ^ `TOP.cpu.sii_l2t2_req[22] ^ `TOP.cpu.sii_l2t2_req[23] ^ `TOP.cpu.sii_l2t2_req[24] ^ `TOP.cpu.sii_l2t2_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t2_req_vld,15))) && ($0in_delay(sii_l2t2_req[24] == 0,15)) && ($0in_delay(sii_l2t2_req[25] == 0,15)) && ($0in_delay(sii_l2t2_req[26] == 1,15)) && ($0in_rising_edge($0in_delay(l2t2_sii_iq_dequeue,15))) && !(sii_wri_ecc3_l2_cycle14 == sii_l2b2_ecc[3]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc3_l2_wri_cycle14
*/

wire sii_wri_ecc4_l2_cycle14 =  ( `TOP.cpu.sii_l2t2_req[11] ^ `TOP.cpu.sii_l2t2_req[12] ^ `TOP.cpu.sii_l2t2_req[13] ^ `TOP.cpu.sii_l2t2_req[14] ^ `TOP.cpu.sii_l2t2_req[15] ^ `TOP.cpu.sii_l2t2_req[16] ^ `TOP.cpu.sii_l2t2_req[17] ^ `TOP.cpu.sii_l2t2_req[18] ^ `TOP.cpu.sii_l2t2_req[19] ^ `TOP.cpu.sii_l2t2_req[20] ^ `TOP.cpu.sii_l2t2_req[21] ^ `TOP.cpu.sii_l2t2_req[22] ^ `TOP.cpu.sii_l2t2_req[23] ^ `TOP.cpu.sii_l2t2_req[24] ^ `TOP.cpu.sii_l2t2_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t2_req_vld,15))) && ($0in_delay(sii_l2t2_req[24] == 0,15)) && ($0in_delay(sii_l2t2_req[25] == 0,15)) && ($0in_delay(sii_l2t2_req[26] == 1,15)) && ($0in_rising_edge($0in_delay(l2t2_sii_iq_dequeue,15))) && !(sii_wri_ecc4_l2_cycle14 == sii_l2b2_ecc[4]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc4_l2_wri_cycle14
*/

wire sii_wri_ecc5_l2_cycle14 =  (`TOP.cpu.sii_l2t2_req[26] ^ `TOP.cpu.sii_l2t2_req[27] ^ `TOP.cpu.sii_l2t2_req[28] ^ `TOP.cpu.sii_l2t2_req[29] ^ `TOP.cpu.sii_l2t2_req[30] ^ `TOP.cpu.sii_l2t2_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t2_req_vld,15))) && ($0in_delay(sii_l2t2_req[24] == 0,15)) && ($0in_delay(sii_l2t2_req[25] == 0,15)) && ($0in_delay(sii_l2t2_req[26] == 1,15)) && ($0in_rising_edge($0in_delay(l2t2_sii_iq_dequeue,15))) && !(sii_wri_ecc5_l2_cycle14 == sii_l2b2_ecc[5]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc5_l2_wri_cycle14
*/

wire sii_wri_ecc6_l2_cycle14 =  (`TOP.cpu.sii_l2t2_req[0] ^ `TOP.cpu.sii_l2t2_req[1] ^ `TOP.cpu.sii_l2t2_req[2] ^ `TOP.cpu.sii_l2t2_req[4] ^ `TOP.cpu.sii_l2t2_req[5] ^ `TOP.cpu.sii_l2t2_req[7] ^ `TOP.cpu.sii_l2t2_req[10] ^ `TOP.cpu.sii_l2t2_req[11] ^ `TOP.cpu.sii_l2t2_req[12] ^ `TOP.cpu.sii_l2t2_req[14] ^ `TOP.cpu.sii_l2t2_req[17] ^ `TOP.cpu.sii_l2t2_req[18] ^ `TOP.cpu.sii_l2t2_req[21] ^ `TOP.cpu.sii_l2t2_req[23] ^ `TOP.cpu.sii_l2t2_req[24] ^ `TOP.cpu.sii_l2t2_req[26] ^ `TOP.cpu.sii_l2t2_req[27] ^ `TOP.cpu.sii_l2t2_req[29] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t2_req_vld,15))) && ($0in_delay(sii_l2t2_req[24] == 0,15)) && ($0in_delay(sii_l2t2_req[25] == 0,15)) && ($0in_delay(sii_l2t2_req[26] == 1,15)) && ($0in_rising_edge($0in_delay(l2t2_sii_iq_dequeue,15))) && !(sii_wri_ecc6_l2_cycle14 == sii_l2b2_ecc[6]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc6_l2_wri_cycle14
*/

wire sii_wri_ecc0_l2_cycle15 =  (`TOP.cpu.sii_l2t2_req[0] ^ `TOP.cpu.sii_l2t2_req[1] ^ `TOP.cpu.sii_l2t2_req[3] ^ `TOP.cpu.sii_l2t2_req[4] ^ `TOP.cpu.sii_l2t2_req[6] ^ `TOP.cpu.sii_l2t2_req[8] ^ `TOP.cpu.sii_l2t2_req[10] ^ `TOP.cpu.sii_l2t2_req[11] ^ `TOP.cpu.sii_l2t2_req[13] ^ `TOP.cpu.sii_l2t2_req[15] ^ `TOP.cpu.sii_l2t2_req[17] ^ `TOP.cpu.sii_l2t2_req[19] ^ `TOP.cpu.sii_l2t2_req[21] ^ `TOP.cpu.sii_l2t2_req[23] ^ `TOP.cpu.sii_l2t2_req[25] ^ `TOP.cpu.sii_l2t2_req[26] ^ `TOP.cpu.sii_l2t2_req[28] ^ `TOP.cpu.sii_l2t2_req[30] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t2_req_vld,16))) && ($0in_delay(sii_l2t2_req[24] == 0,16)) && ($0in_delay(sii_l2t2_req[25] == 0,16)) && ($0in_delay(sii_l2t2_req[26] == 1,16)) && ($0in_rising_edge($0in_delay(l2t2_sii_iq_dequeue,16))) && !(sii_wri_ecc0_l2_cycle15 == sii_l2b2_ecc[0]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc0_l2_wri_cycle15
*/

wire sii_wri_ecc1_l2_cycle15 =  (`TOP.cpu.sii_l2t2_req[0] ^ `TOP.cpu.sii_l2t2_req[2] ^ `TOP.cpu.sii_l2t2_req[3] ^ `TOP.cpu.sii_l2t2_req[5] ^ `TOP.cpu.sii_l2t2_req[6] ^ `TOP.cpu.sii_l2t2_req[9] ^ `TOP.cpu.sii_l2t2_req[10] ^ `TOP.cpu.sii_l2t2_req[12] ^ `TOP.cpu.sii_l2t2_req[13] ^ `TOP.cpu.sii_l2t2_req[16] ^ `TOP.cpu.sii_l2t2_req[17] ^ `TOP.cpu.sii_l2t2_req[20] ^ `TOP.cpu.sii_l2t2_req[21] ^ `TOP.cpu.sii_l2t2_req[24] ^ `TOP.cpu.sii_l2t2_req[25] ^ `TOP.cpu.sii_l2t2_req[27] ^ `TOP.cpu.sii_l2t2_req[28] ^ `TOP.cpu.sii_l2t2_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t2_req_vld,16))) && ($0in_delay(sii_l2t2_req[24] == 0,16)) && ($0in_delay(sii_l2t2_req[25] == 0,16)) && ($0in_delay(sii_l2t2_req[26] == 1,16)) && ($0in_rising_edge($0in_delay(l2t2_sii_iq_dequeue,16))) && !(sii_wri_ecc1_l2_cycle15 == sii_l2b2_ecc[1]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc1_l2_wri_cycle15
*/

wire sii_wri_ecc2_l2_cycle15 =  (`TOP.cpu.sii_l2t2_req[1] ^ `TOP.cpu.sii_l2t2_req[2] ^ `TOP.cpu.sii_l2t2_req[3] ^ `TOP.cpu.sii_l2t2_req[7] ^ `TOP.cpu.sii_l2t2_req[8] ^ `TOP.cpu.sii_l2t2_req[9] ^ `TOP.cpu.sii_l2t2_req[10] ^ `TOP.cpu.sii_l2t2_req[14] ^ `TOP.cpu.sii_l2t2_req[15] ^ `TOP.cpu.sii_l2t2_req[16] ^ `TOP.cpu.sii_l2t2_req[17] ^ `TOP.cpu.sii_l2t2_req[22] ^ `TOP.cpu.sii_l2t2_req[23] ^ `TOP.cpu.sii_l2t2_req[24] ^ `TOP.cpu.sii_l2t2_req[25] ^ `TOP.cpu.sii_l2t2_req[29] ^ `TOP.cpu.sii_l2t2_req[30] ^ `TOP.cpu.sii_l2t2_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t2_req_vld,16))) && ($0in_delay(sii_l2t2_req[24] == 0,16)) && ($0in_delay(sii_l2t2_req[25] == 0,16)) && ($0in_delay(sii_l2t2_req[26] == 1,16)) && ($0in_rising_edge($0in_delay(l2t2_sii_iq_dequeue,16))) && !(sii_wri_ecc2_l2_cycle15 == sii_l2b2_ecc[2]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc2_l2_wri_cycle15
*/

wire sii_wri_ecc3_l2_cycle15 =  (`TOP.cpu.sii_l2t2_req[4] ^ `TOP.cpu.sii_l2t2_req[5] ^ `TOP.cpu.sii_l2t2_req[6] ^ `TOP.cpu.sii_l2t2_req[7] ^ `TOP.cpu.sii_l2t2_req[8] ^ `TOP.cpu.sii_l2t2_req[9] ^ `TOP.cpu.sii_l2t2_req[10] ^ `TOP.cpu.sii_l2t2_req[18] ^ `TOP.cpu.sii_l2t2_req[19] ^ `TOP.cpu.sii_l2t2_req[20] ^ `TOP.cpu.sii_l2t2_req[21] ^ `TOP.cpu.sii_l2t2_req[22] ^ `TOP.cpu.sii_l2t2_req[23] ^ `TOP.cpu.sii_l2t2_req[24] ^ `TOP.cpu.sii_l2t2_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t2_req_vld,16))) && ($0in_delay(sii_l2t2_req[24] == 0,16)) && ($0in_delay(sii_l2t2_req[25] == 0,16)) && ($0in_delay(sii_l2t2_req[26] == 1,16)) && ($0in_rising_edge($0in_delay(l2t2_sii_iq_dequeue,16))) && !(sii_wri_ecc3_l2_cycle15 == sii_l2b2_ecc[3]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc3_l2_wri_cycle15
*/

wire sii_wri_ecc4_l2_cycle15 =  ( `TOP.cpu.sii_l2t2_req[11] ^ `TOP.cpu.sii_l2t2_req[12] ^ `TOP.cpu.sii_l2t2_req[13] ^ `TOP.cpu.sii_l2t2_req[14] ^ `TOP.cpu.sii_l2t2_req[15] ^ `TOP.cpu.sii_l2t2_req[16] ^ `TOP.cpu.sii_l2t2_req[17] ^ `TOP.cpu.sii_l2t2_req[18] ^ `TOP.cpu.sii_l2t2_req[19] ^ `TOP.cpu.sii_l2t2_req[20] ^ `TOP.cpu.sii_l2t2_req[21] ^ `TOP.cpu.sii_l2t2_req[22] ^ `TOP.cpu.sii_l2t2_req[23] ^ `TOP.cpu.sii_l2t2_req[24] ^ `TOP.cpu.sii_l2t2_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t2_req_vld,16))) && ($0in_delay(sii_l2t2_req[24] == 0,16)) && ($0in_delay(sii_l2t2_req[25] == 0,16)) && ($0in_delay(sii_l2t2_req[26] == 1,16)) && ($0in_rising_edge($0in_delay(l2t2_sii_iq_dequeue,16))) && !(sii_wri_ecc4_l2_cycle15 == sii_l2b2_ecc[4]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc4_l2_wri_cycle15
*/

wire sii_wri_ecc5_l2_cycle15 =  (`TOP.cpu.sii_l2t2_req[26] ^ `TOP.cpu.sii_l2t2_req[27] ^ `TOP.cpu.sii_l2t2_req[28] ^ `TOP.cpu.sii_l2t2_req[29] ^ `TOP.cpu.sii_l2t2_req[30] ^ `TOP.cpu.sii_l2t2_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t2_req_vld,16))) && ($0in_delay(sii_l2t2_req[24] == 0,16)) && ($0in_delay(sii_l2t2_req[25] == 0,16)) && ($0in_delay(sii_l2t2_req[26] == 1,16)) && ($0in_rising_edge($0in_delay(l2t2_sii_iq_dequeue,16))) && !(sii_wri_ecc5_l2_cycle15 == sii_l2b2_ecc[5]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc5_l2_wri_cycle15
*/

wire sii_wri_ecc6_l2_cycle15 =  (`TOP.cpu.sii_l2t2_req[0] ^ `TOP.cpu.sii_l2t2_req[1] ^ `TOP.cpu.sii_l2t2_req[2] ^ `TOP.cpu.sii_l2t2_req[4] ^ `TOP.cpu.sii_l2t2_req[5] ^ `TOP.cpu.sii_l2t2_req[7] ^ `TOP.cpu.sii_l2t2_req[10] ^ `TOP.cpu.sii_l2t2_req[11] ^ `TOP.cpu.sii_l2t2_req[12] ^ `TOP.cpu.sii_l2t2_req[14] ^ `TOP.cpu.sii_l2t2_req[17] ^ `TOP.cpu.sii_l2t2_req[18] ^ `TOP.cpu.sii_l2t2_req[21] ^ `TOP.cpu.sii_l2t2_req[23] ^ `TOP.cpu.sii_l2t2_req[24] ^ `TOP.cpu.sii_l2t2_req[26] ^ `TOP.cpu.sii_l2t2_req[27] ^ `TOP.cpu.sii_l2t2_req[29] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t2_req_vld,16))) && ($0in_delay(sii_l2t2_req[24] == 0,16)) && ($0in_delay(sii_l2t2_req[25] == 0,16)) && ($0in_delay(sii_l2t2_req[26] == 1,16)) && ($0in_rising_edge($0in_delay(l2t2_sii_iq_dequeue,16))) && !(sii_wri_ecc6_l2_cycle15 == sii_l2b2_ecc[6]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc6_l2_wri_cycle15
*/

wire sii_wri_ecc0_l2_cycle16 =  (`TOP.cpu.sii_l2t2_req[0] ^ `TOP.cpu.sii_l2t2_req[1] ^ `TOP.cpu.sii_l2t2_req[3] ^ `TOP.cpu.sii_l2t2_req[4] ^ `TOP.cpu.sii_l2t2_req[6] ^ `TOP.cpu.sii_l2t2_req[8] ^ `TOP.cpu.sii_l2t2_req[10] ^ `TOP.cpu.sii_l2t2_req[11] ^ `TOP.cpu.sii_l2t2_req[13] ^ `TOP.cpu.sii_l2t2_req[15] ^ `TOP.cpu.sii_l2t2_req[17] ^ `TOP.cpu.sii_l2t2_req[19] ^ `TOP.cpu.sii_l2t2_req[21] ^ `TOP.cpu.sii_l2t2_req[23] ^ `TOP.cpu.sii_l2t2_req[25] ^ `TOP.cpu.sii_l2t2_req[26] ^ `TOP.cpu.sii_l2t2_req[28] ^ `TOP.cpu.sii_l2t2_req[30] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t2_req_vld,17))) && ($0in_delay(sii_l2t2_req[24] == 0,17)) && ($0in_delay(sii_l2t2_req[25] == 0,17)) && ($0in_delay(sii_l2t2_req[26] == 1,17)) && ($0in_rising_edge($0in_delay(l2t2_sii_iq_dequeue,17))) && !(sii_wri_ecc0_l2_cycle16 == sii_l2b2_ecc[0]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc0_l2_wri_cycle16
*/

wire sii_wri_ecc1_l2_cycle16 =  (`TOP.cpu.sii_l2t2_req[0] ^ `TOP.cpu.sii_l2t2_req[2] ^ `TOP.cpu.sii_l2t2_req[3] ^ `TOP.cpu.sii_l2t2_req[5] ^ `TOP.cpu.sii_l2t2_req[6] ^ `TOP.cpu.sii_l2t2_req[9] ^ `TOP.cpu.sii_l2t2_req[10] ^ `TOP.cpu.sii_l2t2_req[12] ^ `TOP.cpu.sii_l2t2_req[13] ^ `TOP.cpu.sii_l2t2_req[16] ^ `TOP.cpu.sii_l2t2_req[17] ^ `TOP.cpu.sii_l2t2_req[20] ^ `TOP.cpu.sii_l2t2_req[21] ^ `TOP.cpu.sii_l2t2_req[24] ^ `TOP.cpu.sii_l2t2_req[25] ^ `TOP.cpu.sii_l2t2_req[27] ^ `TOP.cpu.sii_l2t2_req[28] ^ `TOP.cpu.sii_l2t2_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t2_req_vld,17))) && ($0in_delay(sii_l2t2_req[24] == 0,17)) && ($0in_delay(sii_l2t2_req[25] == 0,17)) && ($0in_delay(sii_l2t2_req[26] == 1,17)) && ($0in_rising_edge($0in_delay(l2t2_sii_iq_dequeue,17))) && !(sii_wri_ecc1_l2_cycle16 == sii_l2b2_ecc[1]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc1_l2_wri_cycle16
*/

wire sii_wri_ecc2_l2_cycle16 =  (`TOP.cpu.sii_l2t2_req[1] ^ `TOP.cpu.sii_l2t2_req[2] ^ `TOP.cpu.sii_l2t2_req[3] ^ `TOP.cpu.sii_l2t2_req[7] ^ `TOP.cpu.sii_l2t2_req[8] ^ `TOP.cpu.sii_l2t2_req[9] ^ `TOP.cpu.sii_l2t2_req[10] ^ `TOP.cpu.sii_l2t2_req[14] ^ `TOP.cpu.sii_l2t2_req[15] ^ `TOP.cpu.sii_l2t2_req[16] ^ `TOP.cpu.sii_l2t2_req[17] ^ `TOP.cpu.sii_l2t2_req[22] ^ `TOP.cpu.sii_l2t2_req[23] ^ `TOP.cpu.sii_l2t2_req[24] ^ `TOP.cpu.sii_l2t2_req[25] ^ `TOP.cpu.sii_l2t2_req[29] ^ `TOP.cpu.sii_l2t2_req[30] ^ `TOP.cpu.sii_l2t2_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t2_req_vld,17))) && ($0in_delay(sii_l2t2_req[24] == 0,17)) && ($0in_delay(sii_l2t2_req[25] == 0,17)) && ($0in_delay(sii_l2t2_req[26] == 1,17)) && ($0in_rising_edge($0in_delay(l2t2_sii_iq_dequeue,17))) && !(sii_wri_ecc2_l2_cycle16 == sii_l2b2_ecc[2]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc2_l2_wri_cycle16
*/

wire sii_wri_ecc3_l2_cycle16 =  (`TOP.cpu.sii_l2t2_req[4] ^ `TOP.cpu.sii_l2t2_req[5] ^ `TOP.cpu.sii_l2t2_req[6] ^ `TOP.cpu.sii_l2t2_req[7] ^ `TOP.cpu.sii_l2t2_req[8] ^ `TOP.cpu.sii_l2t2_req[9] ^ `TOP.cpu.sii_l2t2_req[10] ^ `TOP.cpu.sii_l2t2_req[18] ^ `TOP.cpu.sii_l2t2_req[19] ^ `TOP.cpu.sii_l2t2_req[20] ^ `TOP.cpu.sii_l2t2_req[21] ^ `TOP.cpu.sii_l2t2_req[22] ^ `TOP.cpu.sii_l2t2_req[23] ^ `TOP.cpu.sii_l2t2_req[24] ^ `TOP.cpu.sii_l2t2_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t2_req_vld,17))) && ($0in_delay(sii_l2t2_req[24] == 0,17)) && ($0in_delay(sii_l2t2_req[25] == 0,17)) && ($0in_delay(sii_l2t2_req[26] == 1,17)) && ($0in_rising_edge($0in_delay(l2t2_sii_iq_dequeue,17))) && !(sii_wri_ecc3_l2_cycle16 == sii_l2b2_ecc[3]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc3_l2_wri_cycle16
*/

wire sii_wri_ecc4_l2_cycle16 =  ( `TOP.cpu.sii_l2t2_req[11] ^ `TOP.cpu.sii_l2t2_req[12] ^ `TOP.cpu.sii_l2t2_req[13] ^ `TOP.cpu.sii_l2t2_req[14] ^ `TOP.cpu.sii_l2t2_req[15] ^ `TOP.cpu.sii_l2t2_req[16] ^ `TOP.cpu.sii_l2t2_req[17] ^ `TOP.cpu.sii_l2t2_req[18] ^ `TOP.cpu.sii_l2t2_req[19] ^ `TOP.cpu.sii_l2t2_req[20] ^ `TOP.cpu.sii_l2t2_req[21] ^ `TOP.cpu.sii_l2t2_req[22] ^ `TOP.cpu.sii_l2t2_req[23] ^ `TOP.cpu.sii_l2t2_req[24] ^ `TOP.cpu.sii_l2t2_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t2_req_vld,17))) && ($0in_delay(sii_l2t2_req[24] == 0,17)) && ($0in_delay(sii_l2t2_req[25] == 0,17)) && ($0in_delay(sii_l2t2_req[26] == 1,17)) && ($0in_rising_edge($0in_delay(l2t2_sii_iq_dequeue,17))) && !(sii_wri_ecc4_l2_cycle16 == sii_l2b2_ecc[4]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc4_l2_wri_cycle16
*/

wire sii_wri_ecc5_l2_cycle16 =  (`TOP.cpu.sii_l2t2_req[26] ^ `TOP.cpu.sii_l2t2_req[27] ^ `TOP.cpu.sii_l2t2_req[28] ^ `TOP.cpu.sii_l2t2_req[29] ^ `TOP.cpu.sii_l2t2_req[30] ^ `TOP.cpu.sii_l2t2_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t2_req_vld,17))) && ($0in_delay(sii_l2t2_req[24] == 0,17)) && ($0in_delay(sii_l2t2_req[25] == 0,17)) && ($0in_delay(sii_l2t2_req[26] == 1,17)) && ($0in_rising_edge($0in_delay(l2t2_sii_iq_dequeue,17))) && !(sii_wri_ecc5_l2_cycle16 == sii_l2b2_ecc[5]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc5_l2_wri_cycle16
*/

wire sii_wri_ecc6_l2_cycle16 =  (`TOP.cpu.sii_l2t2_req[0] ^ `TOP.cpu.sii_l2t2_req[1] ^ `TOP.cpu.sii_l2t2_req[2] ^ `TOP.cpu.sii_l2t2_req[4] ^ `TOP.cpu.sii_l2t2_req[5] ^ `TOP.cpu.sii_l2t2_req[7] ^ `TOP.cpu.sii_l2t2_req[10] ^ `TOP.cpu.sii_l2t2_req[11] ^ `TOP.cpu.sii_l2t2_req[12] ^ `TOP.cpu.sii_l2t2_req[14] ^ `TOP.cpu.sii_l2t2_req[17] ^ `TOP.cpu.sii_l2t2_req[18] ^ `TOP.cpu.sii_l2t2_req[21] ^ `TOP.cpu.sii_l2t2_req[23] ^ `TOP.cpu.sii_l2t2_req[24] ^ `TOP.cpu.sii_l2t2_req[26] ^ `TOP.cpu.sii_l2t2_req[27] ^ `TOP.cpu.sii_l2t2_req[29] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t2_req_vld,17))) && ($0in_delay(sii_l2t2_req[24] == 0,17)) && ($0in_delay(sii_l2t2_req[25] == 0,17)) && ($0in_delay(sii_l2t2_req[26] == 1,17)) && ($0in_rising_edge($0in_delay(l2t2_sii_iq_dequeue,17))) && !(sii_wri_ecc6_l2_cycle16 == sii_l2b2_ecc[6]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc6_l2_wri_cycle16
*/

wire sii_wri_ecc0_l3_cycle1 =  (`TOP.cpu.sii_l2t3_req[0] ^ `TOP.cpu.sii_l2t3_req[1] ^ `TOP.cpu.sii_l2t3_req[3] ^ `TOP.cpu.sii_l2t3_req[4] ^ `TOP.cpu.sii_l2t3_req[6] ^ `TOP.cpu.sii_l2t3_req[8] ^ `TOP.cpu.sii_l2t3_req[10] ^ `TOP.cpu.sii_l2t3_req[11] ^ `TOP.cpu.sii_l2t3_req[13] ^ `TOP.cpu.sii_l2t3_req[15] ^ `TOP.cpu.sii_l2t3_req[17] ^ `TOP.cpu.sii_l2t3_req[19] ^ `TOP.cpu.sii_l2t3_req[21] ^ `TOP.cpu.sii_l2t3_req[23] ^ `TOP.cpu.sii_l2t3_req[25] ^ `TOP.cpu.sii_l2t3_req[26] ^ `TOP.cpu.sii_l2t3_req[28] ^ `TOP.cpu.sii_l2t3_req[30] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t3_req_vld,2))) && ($0in_delay(sii_l2t3_req[24] == 0,2)) && ($0in_delay(sii_l2t3_req[25] == 0,2)) && ($0in_delay(sii_l2t3_req[26] == 1,2)) && ($0in_rising_edge($0in_delay(l2t3_sii_iq_dequeue,2))) && !(sii_wri_ecc0_l3_cycle1 == sii_l2b3_ecc[0]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc0_l3_wri_cycle1
*/

wire sii_wri_ecc1_l3_cycle1 =  (`TOP.cpu.sii_l2t3_req[0] ^ `TOP.cpu.sii_l2t3_req[2] ^ `TOP.cpu.sii_l2t3_req[3] ^ `TOP.cpu.sii_l2t3_req[5] ^ `TOP.cpu.sii_l2t3_req[6] ^ `TOP.cpu.sii_l2t3_req[9] ^ `TOP.cpu.sii_l2t3_req[10] ^ `TOP.cpu.sii_l2t3_req[12] ^ `TOP.cpu.sii_l2t3_req[13] ^ `TOP.cpu.sii_l2t3_req[16] ^ `TOP.cpu.sii_l2t3_req[17] ^ `TOP.cpu.sii_l2t3_req[20] ^ `TOP.cpu.sii_l2t3_req[21] ^ `TOP.cpu.sii_l2t3_req[24] ^ `TOP.cpu.sii_l2t3_req[25] ^ `TOP.cpu.sii_l2t3_req[27] ^ `TOP.cpu.sii_l2t3_req[28] ^ `TOP.cpu.sii_l2t3_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t3_req_vld,2))) && ($0in_delay(sii_l2t3_req[24] == 0,2)) && ($0in_delay(sii_l2t3_req[25] == 0,2)) && ($0in_delay(sii_l2t3_req[26] == 1,2)) && ($0in_rising_edge($0in_delay(l2t3_sii_iq_dequeue,2))) && !(sii_wri_ecc1_l3_cycle1 == sii_l2b3_ecc[1]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc1_l3_wri_cycle1
*/

wire sii_wri_ecc2_l3_cycle1 =  (`TOP.cpu.sii_l2t3_req[1] ^ `TOP.cpu.sii_l2t3_req[2] ^ `TOP.cpu.sii_l2t3_req[3] ^ `TOP.cpu.sii_l2t3_req[7] ^ `TOP.cpu.sii_l2t3_req[8] ^ `TOP.cpu.sii_l2t3_req[9] ^ `TOP.cpu.sii_l2t3_req[10] ^ `TOP.cpu.sii_l2t3_req[14] ^ `TOP.cpu.sii_l2t3_req[15] ^ `TOP.cpu.sii_l2t3_req[16] ^ `TOP.cpu.sii_l2t3_req[17] ^ `TOP.cpu.sii_l2t3_req[22] ^ `TOP.cpu.sii_l2t3_req[23] ^ `TOP.cpu.sii_l2t3_req[24] ^ `TOP.cpu.sii_l2t3_req[25] ^ `TOP.cpu.sii_l2t3_req[29] ^ `TOP.cpu.sii_l2t3_req[30] ^ `TOP.cpu.sii_l2t3_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t3_req_vld,2))) && ($0in_delay(sii_l2t3_req[24] == 0,2)) && ($0in_delay(sii_l2t3_req[25] == 0,2)) && ($0in_delay(sii_l2t3_req[26] == 1,2)) && ($0in_rising_edge($0in_delay(l2t3_sii_iq_dequeue,2))) && !(sii_wri_ecc2_l3_cycle1 == sii_l2b3_ecc[2]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc2_l3_wri_cycle1
*/

wire sii_wri_ecc3_l3_cycle1 =  (`TOP.cpu.sii_l2t3_req[4] ^ `TOP.cpu.sii_l2t3_req[5] ^ `TOP.cpu.sii_l2t3_req[6] ^ `TOP.cpu.sii_l2t3_req[7] ^ `TOP.cpu.sii_l2t3_req[8] ^ `TOP.cpu.sii_l2t3_req[9] ^ `TOP.cpu.sii_l2t3_req[10] ^ `TOP.cpu.sii_l2t3_req[18] ^ `TOP.cpu.sii_l2t3_req[19] ^ `TOP.cpu.sii_l2t3_req[20] ^ `TOP.cpu.sii_l2t3_req[21] ^ `TOP.cpu.sii_l2t3_req[22] ^ `TOP.cpu.sii_l2t3_req[23] ^ `TOP.cpu.sii_l2t3_req[24] ^ `TOP.cpu.sii_l2t3_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t3_req_vld,2))) && ($0in_delay(sii_l2t3_req[24] == 0,2)) && ($0in_delay(sii_l2t3_req[25] == 0,2)) && ($0in_delay(sii_l2t3_req[26] == 1,2)) && ($0in_rising_edge($0in_delay(l2t3_sii_iq_dequeue,2))) && !(sii_wri_ecc3_l3_cycle1 == sii_l2b3_ecc[3]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc3_l3_wri_cycle1
*/

wire sii_wri_ecc4_l3_cycle1 =  ( `TOP.cpu.sii_l2t3_req[11] ^ `TOP.cpu.sii_l2t3_req[12] ^ `TOP.cpu.sii_l2t3_req[13] ^ `TOP.cpu.sii_l2t3_req[14] ^ `TOP.cpu.sii_l2t3_req[15] ^ `TOP.cpu.sii_l2t3_req[16] ^ `TOP.cpu.sii_l2t3_req[17] ^ `TOP.cpu.sii_l2t3_req[18] ^ `TOP.cpu.sii_l2t3_req[19] ^ `TOP.cpu.sii_l2t3_req[20] ^ `TOP.cpu.sii_l2t3_req[21] ^ `TOP.cpu.sii_l2t3_req[22] ^ `TOP.cpu.sii_l2t3_req[23] ^ `TOP.cpu.sii_l2t3_req[24] ^ `TOP.cpu.sii_l2t3_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t3_req_vld,2))) && ($0in_delay(sii_l2t3_req[24] == 0,2)) && ($0in_delay(sii_l2t3_req[25] == 0,2)) && ($0in_delay(sii_l2t3_req[26] == 1,2)) && ($0in_rising_edge($0in_delay(l2t3_sii_iq_dequeue,2))) && !(sii_wri_ecc4_l3_cycle1 == sii_l2b3_ecc[4]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc4_l3_wri_cycle1
*/

wire sii_wri_ecc5_l3_cycle1 =  (`TOP.cpu.sii_l2t3_req[26] ^ `TOP.cpu.sii_l2t3_req[27] ^ `TOP.cpu.sii_l2t3_req[28] ^ `TOP.cpu.sii_l2t3_req[29] ^ `TOP.cpu.sii_l2t3_req[30] ^ `TOP.cpu.sii_l2t3_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t3_req_vld,2))) && ($0in_delay(sii_l2t3_req[24] == 0,2)) && ($0in_delay(sii_l2t3_req[25] == 0,2)) && ($0in_delay(sii_l2t3_req[26] == 1,2)) && ($0in_rising_edge($0in_delay(l2t3_sii_iq_dequeue,2))) && !(sii_wri_ecc5_l3_cycle1 == sii_l2b3_ecc[5]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc5_l3_wri_cycle1
*/

wire sii_wri_ecc6_l3_cycle1 =  (`TOP.cpu.sii_l2t3_req[0] ^ `TOP.cpu.sii_l2t3_req[1] ^ `TOP.cpu.sii_l2t3_req[2] ^ `TOP.cpu.sii_l2t3_req[4] ^ `TOP.cpu.sii_l2t3_req[5] ^ `TOP.cpu.sii_l2t3_req[7] ^ `TOP.cpu.sii_l2t3_req[10] ^ `TOP.cpu.sii_l2t3_req[11] ^ `TOP.cpu.sii_l2t3_req[12] ^ `TOP.cpu.sii_l2t3_req[14] ^ `TOP.cpu.sii_l2t3_req[17] ^ `TOP.cpu.sii_l2t3_req[18] ^ `TOP.cpu.sii_l2t3_req[21] ^ `TOP.cpu.sii_l2t3_req[23] ^ `TOP.cpu.sii_l2t3_req[24] ^ `TOP.cpu.sii_l2t3_req[26] ^ `TOP.cpu.sii_l2t3_req[27] ^ `TOP.cpu.sii_l2t3_req[29] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t3_req_vld,2))) && ($0in_delay(sii_l2t3_req[24] == 0,2)) && ($0in_delay(sii_l2t3_req[25] == 0,2)) && ($0in_delay(sii_l2t3_req[26] == 1,2)) && ($0in_rising_edge($0in_delay(l2t3_sii_iq_dequeue,2))) && !(sii_wri_ecc6_l3_cycle1 == sii_l2b3_ecc[6]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc6_l3_wri_cycle1
*/

wire sii_wri_ecc0_l3_cycle2 =  (`TOP.cpu.sii_l2t3_req[0] ^ `TOP.cpu.sii_l2t3_req[1] ^ `TOP.cpu.sii_l2t3_req[3] ^ `TOP.cpu.sii_l2t3_req[4] ^ `TOP.cpu.sii_l2t3_req[6] ^ `TOP.cpu.sii_l2t3_req[8] ^ `TOP.cpu.sii_l2t3_req[10] ^ `TOP.cpu.sii_l2t3_req[11] ^ `TOP.cpu.sii_l2t3_req[13] ^ `TOP.cpu.sii_l2t3_req[15] ^ `TOP.cpu.sii_l2t3_req[17] ^ `TOP.cpu.sii_l2t3_req[19] ^ `TOP.cpu.sii_l2t3_req[21] ^ `TOP.cpu.sii_l2t3_req[23] ^ `TOP.cpu.sii_l2t3_req[25] ^ `TOP.cpu.sii_l2t3_req[26] ^ `TOP.cpu.sii_l2t3_req[28] ^ `TOP.cpu.sii_l2t3_req[30] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t3_req_vld,3))) && ($0in_delay(sii_l2t3_req[24] == 0,3)) && ($0in_delay(sii_l2t3_req[25] == 0,3)) && ($0in_delay(sii_l2t3_req[26] == 1,3)) && ($0in_rising_edge($0in_delay(l2t3_sii_iq_dequeue,3))) && !(sii_wri_ecc0_l3_cycle2 == sii_l2b3_ecc[0]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc0_l3_wri_cycle2
*/

wire sii_wri_ecc1_l3_cycle2 =  (`TOP.cpu.sii_l2t3_req[0] ^ `TOP.cpu.sii_l2t3_req[2] ^ `TOP.cpu.sii_l2t3_req[3] ^ `TOP.cpu.sii_l2t3_req[5] ^ `TOP.cpu.sii_l2t3_req[6] ^ `TOP.cpu.sii_l2t3_req[9] ^ `TOP.cpu.sii_l2t3_req[10] ^ `TOP.cpu.sii_l2t3_req[12] ^ `TOP.cpu.sii_l2t3_req[13] ^ `TOP.cpu.sii_l2t3_req[16] ^ `TOP.cpu.sii_l2t3_req[17] ^ `TOP.cpu.sii_l2t3_req[20] ^ `TOP.cpu.sii_l2t3_req[21] ^ `TOP.cpu.sii_l2t3_req[24] ^ `TOP.cpu.sii_l2t3_req[25] ^ `TOP.cpu.sii_l2t3_req[27] ^ `TOP.cpu.sii_l2t3_req[28] ^ `TOP.cpu.sii_l2t3_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t3_req_vld,3))) && ($0in_delay(sii_l2t3_req[24] == 0,3)) && ($0in_delay(sii_l2t3_req[25] == 0,3)) && ($0in_delay(sii_l2t3_req[26] == 1,3)) && ($0in_rising_edge($0in_delay(l2t3_sii_iq_dequeue,3))) && !(sii_wri_ecc1_l3_cycle2 == sii_l2b3_ecc[1]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc1_l3_wri_cycle2
*/

wire sii_wri_ecc2_l3_cycle2 =  (`TOP.cpu.sii_l2t3_req[1] ^ `TOP.cpu.sii_l2t3_req[2] ^ `TOP.cpu.sii_l2t3_req[3] ^ `TOP.cpu.sii_l2t3_req[7] ^ `TOP.cpu.sii_l2t3_req[8] ^ `TOP.cpu.sii_l2t3_req[9] ^ `TOP.cpu.sii_l2t3_req[10] ^ `TOP.cpu.sii_l2t3_req[14] ^ `TOP.cpu.sii_l2t3_req[15] ^ `TOP.cpu.sii_l2t3_req[16] ^ `TOP.cpu.sii_l2t3_req[17] ^ `TOP.cpu.sii_l2t3_req[22] ^ `TOP.cpu.sii_l2t3_req[23] ^ `TOP.cpu.sii_l2t3_req[24] ^ `TOP.cpu.sii_l2t3_req[25] ^ `TOP.cpu.sii_l2t3_req[29] ^ `TOP.cpu.sii_l2t3_req[30] ^ `TOP.cpu.sii_l2t3_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t3_req_vld,3))) && ($0in_delay(sii_l2t3_req[24] == 0,3)) && ($0in_delay(sii_l2t3_req[25] == 0,3)) && ($0in_delay(sii_l2t3_req[26] == 1,3)) && ($0in_rising_edge($0in_delay(l2t3_sii_iq_dequeue,3))) && !(sii_wri_ecc2_l3_cycle2 == sii_l2b3_ecc[2]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc2_l3_wri_cycle2
*/

wire sii_wri_ecc3_l3_cycle2 =  (`TOP.cpu.sii_l2t3_req[4] ^ `TOP.cpu.sii_l2t3_req[5] ^ `TOP.cpu.sii_l2t3_req[6] ^ `TOP.cpu.sii_l2t3_req[7] ^ `TOP.cpu.sii_l2t3_req[8] ^ `TOP.cpu.sii_l2t3_req[9] ^ `TOP.cpu.sii_l2t3_req[10] ^ `TOP.cpu.sii_l2t3_req[18] ^ `TOP.cpu.sii_l2t3_req[19] ^ `TOP.cpu.sii_l2t3_req[20] ^ `TOP.cpu.sii_l2t3_req[21] ^ `TOP.cpu.sii_l2t3_req[22] ^ `TOP.cpu.sii_l2t3_req[23] ^ `TOP.cpu.sii_l2t3_req[24] ^ `TOP.cpu.sii_l2t3_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t3_req_vld,3))) && ($0in_delay(sii_l2t3_req[24] == 0,3)) && ($0in_delay(sii_l2t3_req[25] == 0,3)) && ($0in_delay(sii_l2t3_req[26] == 1,3)) && ($0in_rising_edge($0in_delay(l2t3_sii_iq_dequeue,3))) && !(sii_wri_ecc3_l3_cycle2 == sii_l2b3_ecc[3]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc3_l3_wri_cycle2
*/

wire sii_wri_ecc4_l3_cycle2 =  ( `TOP.cpu.sii_l2t3_req[11] ^ `TOP.cpu.sii_l2t3_req[12] ^ `TOP.cpu.sii_l2t3_req[13] ^ `TOP.cpu.sii_l2t3_req[14] ^ `TOP.cpu.sii_l2t3_req[15] ^ `TOP.cpu.sii_l2t3_req[16] ^ `TOP.cpu.sii_l2t3_req[17] ^ `TOP.cpu.sii_l2t3_req[18] ^ `TOP.cpu.sii_l2t3_req[19] ^ `TOP.cpu.sii_l2t3_req[20] ^ `TOP.cpu.sii_l2t3_req[21] ^ `TOP.cpu.sii_l2t3_req[22] ^ `TOP.cpu.sii_l2t3_req[23] ^ `TOP.cpu.sii_l2t3_req[24] ^ `TOP.cpu.sii_l2t3_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t3_req_vld,3))) && ($0in_delay(sii_l2t3_req[24] == 0,3)) && ($0in_delay(sii_l2t3_req[25] == 0,3)) && ($0in_delay(sii_l2t3_req[26] == 1,3)) && ($0in_rising_edge($0in_delay(l2t3_sii_iq_dequeue,3))) && !(sii_wri_ecc4_l3_cycle2 == sii_l2b3_ecc[4]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc4_l3_wri_cycle2
*/

wire sii_wri_ecc5_l3_cycle2 =  (`TOP.cpu.sii_l2t3_req[26] ^ `TOP.cpu.sii_l2t3_req[27] ^ `TOP.cpu.sii_l2t3_req[28] ^ `TOP.cpu.sii_l2t3_req[29] ^ `TOP.cpu.sii_l2t3_req[30] ^ `TOP.cpu.sii_l2t3_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t3_req_vld,3))) && ($0in_delay(sii_l2t3_req[24] == 0,3)) && ($0in_delay(sii_l2t3_req[25] == 0,3)) && ($0in_delay(sii_l2t3_req[26] == 1,3)) && ($0in_rising_edge($0in_delay(l2t3_sii_iq_dequeue,3))) && !(sii_wri_ecc5_l3_cycle2 == sii_l2b3_ecc[5]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc5_l3_wri_cycle2
*/

wire sii_wri_ecc6_l3_cycle2 =  (`TOP.cpu.sii_l2t3_req[0] ^ `TOP.cpu.sii_l2t3_req[1] ^ `TOP.cpu.sii_l2t3_req[2] ^ `TOP.cpu.sii_l2t3_req[4] ^ `TOP.cpu.sii_l2t3_req[5] ^ `TOP.cpu.sii_l2t3_req[7] ^ `TOP.cpu.sii_l2t3_req[10] ^ `TOP.cpu.sii_l2t3_req[11] ^ `TOP.cpu.sii_l2t3_req[12] ^ `TOP.cpu.sii_l2t3_req[14] ^ `TOP.cpu.sii_l2t3_req[17] ^ `TOP.cpu.sii_l2t3_req[18] ^ `TOP.cpu.sii_l2t3_req[21] ^ `TOP.cpu.sii_l2t3_req[23] ^ `TOP.cpu.sii_l2t3_req[24] ^ `TOP.cpu.sii_l2t3_req[26] ^ `TOP.cpu.sii_l2t3_req[27] ^ `TOP.cpu.sii_l2t3_req[29] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t3_req_vld,3))) && ($0in_delay(sii_l2t3_req[24] == 0,3)) && ($0in_delay(sii_l2t3_req[25] == 0,3)) && ($0in_delay(sii_l2t3_req[26] == 1,3)) && ($0in_rising_edge($0in_delay(l2t3_sii_iq_dequeue,3))) && !(sii_wri_ecc6_l3_cycle2 == sii_l2b3_ecc[6]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc6_l3_wri_cycle2
*/

wire sii_wri_ecc0_l3_cycle3 =  (`TOP.cpu.sii_l2t3_req[0] ^ `TOP.cpu.sii_l2t3_req[1] ^ `TOP.cpu.sii_l2t3_req[3] ^ `TOP.cpu.sii_l2t3_req[4] ^ `TOP.cpu.sii_l2t3_req[6] ^ `TOP.cpu.sii_l2t3_req[8] ^ `TOP.cpu.sii_l2t3_req[10] ^ `TOP.cpu.sii_l2t3_req[11] ^ `TOP.cpu.sii_l2t3_req[13] ^ `TOP.cpu.sii_l2t3_req[15] ^ `TOP.cpu.sii_l2t3_req[17] ^ `TOP.cpu.sii_l2t3_req[19] ^ `TOP.cpu.sii_l2t3_req[21] ^ `TOP.cpu.sii_l2t3_req[23] ^ `TOP.cpu.sii_l2t3_req[25] ^ `TOP.cpu.sii_l2t3_req[26] ^ `TOP.cpu.sii_l2t3_req[28] ^ `TOP.cpu.sii_l2t3_req[30] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t3_req_vld,4))) && ($0in_delay(sii_l2t3_req[24] == 0,4)) && ($0in_delay(sii_l2t3_req[25] == 0,4)) && ($0in_delay(sii_l2t3_req[26] == 1,4)) && ($0in_rising_edge($0in_delay(l2t3_sii_iq_dequeue,4))) && !(sii_wri_ecc0_l3_cycle3 == sii_l2b3_ecc[0]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc0_l3_wri_cycle3
*/

wire sii_wri_ecc1_l3_cycle3 =  (`TOP.cpu.sii_l2t3_req[0] ^ `TOP.cpu.sii_l2t3_req[2] ^ `TOP.cpu.sii_l2t3_req[3] ^ `TOP.cpu.sii_l2t3_req[5] ^ `TOP.cpu.sii_l2t3_req[6] ^ `TOP.cpu.sii_l2t3_req[9] ^ `TOP.cpu.sii_l2t3_req[10] ^ `TOP.cpu.sii_l2t3_req[12] ^ `TOP.cpu.sii_l2t3_req[13] ^ `TOP.cpu.sii_l2t3_req[16] ^ `TOP.cpu.sii_l2t3_req[17] ^ `TOP.cpu.sii_l2t3_req[20] ^ `TOP.cpu.sii_l2t3_req[21] ^ `TOP.cpu.sii_l2t3_req[24] ^ `TOP.cpu.sii_l2t3_req[25] ^ `TOP.cpu.sii_l2t3_req[27] ^ `TOP.cpu.sii_l2t3_req[28] ^ `TOP.cpu.sii_l2t3_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t3_req_vld,4))) && ($0in_delay(sii_l2t3_req[24] == 0,4)) && ($0in_delay(sii_l2t3_req[25] == 0,4)) && ($0in_delay(sii_l2t3_req[26] == 1,4)) && ($0in_rising_edge($0in_delay(l2t3_sii_iq_dequeue,4))) && !(sii_wri_ecc1_l3_cycle3 == sii_l2b3_ecc[1]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc1_l3_wri_cycle3
*/

wire sii_wri_ecc2_l3_cycle3 =  (`TOP.cpu.sii_l2t3_req[1] ^ `TOP.cpu.sii_l2t3_req[2] ^ `TOP.cpu.sii_l2t3_req[3] ^ `TOP.cpu.sii_l2t3_req[7] ^ `TOP.cpu.sii_l2t3_req[8] ^ `TOP.cpu.sii_l2t3_req[9] ^ `TOP.cpu.sii_l2t3_req[10] ^ `TOP.cpu.sii_l2t3_req[14] ^ `TOP.cpu.sii_l2t3_req[15] ^ `TOP.cpu.sii_l2t3_req[16] ^ `TOP.cpu.sii_l2t3_req[17] ^ `TOP.cpu.sii_l2t3_req[22] ^ `TOP.cpu.sii_l2t3_req[23] ^ `TOP.cpu.sii_l2t3_req[24] ^ `TOP.cpu.sii_l2t3_req[25] ^ `TOP.cpu.sii_l2t3_req[29] ^ `TOP.cpu.sii_l2t3_req[30] ^ `TOP.cpu.sii_l2t3_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t3_req_vld,4))) && ($0in_delay(sii_l2t3_req[24] == 0,4)) && ($0in_delay(sii_l2t3_req[25] == 0,4)) && ($0in_delay(sii_l2t3_req[26] == 1,4)) && ($0in_rising_edge($0in_delay(l2t3_sii_iq_dequeue,4))) && !(sii_wri_ecc2_l3_cycle3 == sii_l2b3_ecc[2]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc2_l3_wri_cycle3
*/

wire sii_wri_ecc3_l3_cycle3 =  (`TOP.cpu.sii_l2t3_req[4] ^ `TOP.cpu.sii_l2t3_req[5] ^ `TOP.cpu.sii_l2t3_req[6] ^ `TOP.cpu.sii_l2t3_req[7] ^ `TOP.cpu.sii_l2t3_req[8] ^ `TOP.cpu.sii_l2t3_req[9] ^ `TOP.cpu.sii_l2t3_req[10] ^ `TOP.cpu.sii_l2t3_req[18] ^ `TOP.cpu.sii_l2t3_req[19] ^ `TOP.cpu.sii_l2t3_req[20] ^ `TOP.cpu.sii_l2t3_req[21] ^ `TOP.cpu.sii_l2t3_req[22] ^ `TOP.cpu.sii_l2t3_req[23] ^ `TOP.cpu.sii_l2t3_req[24] ^ `TOP.cpu.sii_l2t3_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t3_req_vld,4))) && ($0in_delay(sii_l2t3_req[24] == 0,4)) && ($0in_delay(sii_l2t3_req[25] == 0,4)) && ($0in_delay(sii_l2t3_req[26] == 1,4)) && ($0in_rising_edge($0in_delay(l2t3_sii_iq_dequeue,4))) && !(sii_wri_ecc3_l3_cycle3 == sii_l2b3_ecc[3]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc3_l3_wri_cycle3
*/

wire sii_wri_ecc4_l3_cycle3 =  ( `TOP.cpu.sii_l2t3_req[11] ^ `TOP.cpu.sii_l2t3_req[12] ^ `TOP.cpu.sii_l2t3_req[13] ^ `TOP.cpu.sii_l2t3_req[14] ^ `TOP.cpu.sii_l2t3_req[15] ^ `TOP.cpu.sii_l2t3_req[16] ^ `TOP.cpu.sii_l2t3_req[17] ^ `TOP.cpu.sii_l2t3_req[18] ^ `TOP.cpu.sii_l2t3_req[19] ^ `TOP.cpu.sii_l2t3_req[20] ^ `TOP.cpu.sii_l2t3_req[21] ^ `TOP.cpu.sii_l2t3_req[22] ^ `TOP.cpu.sii_l2t3_req[23] ^ `TOP.cpu.sii_l2t3_req[24] ^ `TOP.cpu.sii_l2t3_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t3_req_vld,4))) && ($0in_delay(sii_l2t3_req[24] == 0,4)) && ($0in_delay(sii_l2t3_req[25] == 0,4)) && ($0in_delay(sii_l2t3_req[26] == 1,4)) && ($0in_rising_edge($0in_delay(l2t3_sii_iq_dequeue,4))) && !(sii_wri_ecc4_l3_cycle3 == sii_l2b3_ecc[4]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc4_l3_wri_cycle3
*/

wire sii_wri_ecc5_l3_cycle3 =  (`TOP.cpu.sii_l2t3_req[26] ^ `TOP.cpu.sii_l2t3_req[27] ^ `TOP.cpu.sii_l2t3_req[28] ^ `TOP.cpu.sii_l2t3_req[29] ^ `TOP.cpu.sii_l2t3_req[30] ^ `TOP.cpu.sii_l2t3_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t3_req_vld,4))) && ($0in_delay(sii_l2t3_req[24] == 0,4)) && ($0in_delay(sii_l2t3_req[25] == 0,4)) && ($0in_delay(sii_l2t3_req[26] == 1,4)) && ($0in_rising_edge($0in_delay(l2t3_sii_iq_dequeue,4))) && !(sii_wri_ecc5_l3_cycle3 == sii_l2b3_ecc[5]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc5_l3_wri_cycle3
*/

wire sii_wri_ecc6_l3_cycle3 =  (`TOP.cpu.sii_l2t3_req[0] ^ `TOP.cpu.sii_l2t3_req[1] ^ `TOP.cpu.sii_l2t3_req[2] ^ `TOP.cpu.sii_l2t3_req[4] ^ `TOP.cpu.sii_l2t3_req[5] ^ `TOP.cpu.sii_l2t3_req[7] ^ `TOP.cpu.sii_l2t3_req[10] ^ `TOP.cpu.sii_l2t3_req[11] ^ `TOP.cpu.sii_l2t3_req[12] ^ `TOP.cpu.sii_l2t3_req[14] ^ `TOP.cpu.sii_l2t3_req[17] ^ `TOP.cpu.sii_l2t3_req[18] ^ `TOP.cpu.sii_l2t3_req[21] ^ `TOP.cpu.sii_l2t3_req[23] ^ `TOP.cpu.sii_l2t3_req[24] ^ `TOP.cpu.sii_l2t3_req[26] ^ `TOP.cpu.sii_l2t3_req[27] ^ `TOP.cpu.sii_l2t3_req[29] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t3_req_vld,4))) && ($0in_delay(sii_l2t3_req[24] == 0,4)) && ($0in_delay(sii_l2t3_req[25] == 0,2)) && ($0in_delay(sii_l2t3_req[26] == 1,4)) && ($0in_rising_edge($0in_delay(l2t3_sii_iq_dequeue,4))) && !(sii_wri_ecc6_l3_cycle3 == sii_l2b3_ecc[6]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc6_l3_wri_cycle3
*/

wire sii_wri_ecc0_l3_cycle4 =  (`TOP.cpu.sii_l2t3_req[0] ^ `TOP.cpu.sii_l2t3_req[1] ^ `TOP.cpu.sii_l2t3_req[3] ^ `TOP.cpu.sii_l2t3_req[4] ^ `TOP.cpu.sii_l2t3_req[6] ^ `TOP.cpu.sii_l2t3_req[8] ^ `TOP.cpu.sii_l2t3_req[10] ^ `TOP.cpu.sii_l2t3_req[11] ^ `TOP.cpu.sii_l2t3_req[13] ^ `TOP.cpu.sii_l2t3_req[15] ^ `TOP.cpu.sii_l2t3_req[17] ^ `TOP.cpu.sii_l2t3_req[19] ^ `TOP.cpu.sii_l2t3_req[21] ^ `TOP.cpu.sii_l2t3_req[23] ^ `TOP.cpu.sii_l2t3_req[25] ^ `TOP.cpu.sii_l2t3_req[26] ^ `TOP.cpu.sii_l2t3_req[28] ^ `TOP.cpu.sii_l2t3_req[30] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t3_req_vld,5))) && ($0in_delay(sii_l2t3_req[24] == 0,5)) && ($0in_delay(sii_l2t3_req[25] == 0,5)) && ($0in_delay(sii_l2t3_req[26] == 1,5)) && ($0in_rising_edge($0in_delay(l2t3_sii_iq_dequeue,5))) && !(sii_wri_ecc0_l3_cycle4 == sii_l2b3_ecc[0]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc0_l3_wri_cycle4
*/

wire sii_wri_ecc1_l3_cycle4 =  (`TOP.cpu.sii_l2t3_req[0] ^ `TOP.cpu.sii_l2t3_req[2] ^ `TOP.cpu.sii_l2t3_req[3] ^ `TOP.cpu.sii_l2t3_req[5] ^ `TOP.cpu.sii_l2t3_req[6] ^ `TOP.cpu.sii_l2t3_req[9] ^ `TOP.cpu.sii_l2t3_req[10] ^ `TOP.cpu.sii_l2t3_req[12] ^ `TOP.cpu.sii_l2t3_req[13] ^ `TOP.cpu.sii_l2t3_req[16] ^ `TOP.cpu.sii_l2t3_req[17] ^ `TOP.cpu.sii_l2t3_req[20] ^ `TOP.cpu.sii_l2t3_req[21] ^ `TOP.cpu.sii_l2t3_req[24] ^ `TOP.cpu.sii_l2t3_req[25] ^ `TOP.cpu.sii_l2t3_req[27] ^ `TOP.cpu.sii_l2t3_req[28] ^ `TOP.cpu.sii_l2t3_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t3_req_vld,5))) && ($0in_delay(sii_l2t3_req[24] == 0,5)) && ($0in_delay(sii_l2t3_req[25] == 0,5)) && ($0in_delay(sii_l2t3_req[26] == 1,5)) && ($0in_rising_edge($0in_delay(l2t3_sii_iq_dequeue,5))) && !(sii_wri_ecc1_l3_cycle4 == sii_l2b3_ecc[1]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc1_l3_wri_cycle4
*/

wire sii_wri_ecc2_l3_cycle4 =  (`TOP.cpu.sii_l2t3_req[1] ^ `TOP.cpu.sii_l2t3_req[2] ^ `TOP.cpu.sii_l2t3_req[3] ^ `TOP.cpu.sii_l2t3_req[7] ^ `TOP.cpu.sii_l2t3_req[8] ^ `TOP.cpu.sii_l2t3_req[9] ^ `TOP.cpu.sii_l2t3_req[10] ^ `TOP.cpu.sii_l2t3_req[14] ^ `TOP.cpu.sii_l2t3_req[15] ^ `TOP.cpu.sii_l2t3_req[16] ^ `TOP.cpu.sii_l2t3_req[17] ^ `TOP.cpu.sii_l2t3_req[22] ^ `TOP.cpu.sii_l2t3_req[23] ^ `TOP.cpu.sii_l2t3_req[24] ^ `TOP.cpu.sii_l2t3_req[25] ^ `TOP.cpu.sii_l2t3_req[29] ^ `TOP.cpu.sii_l2t3_req[30] ^ `TOP.cpu.sii_l2t3_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t3_req_vld,5))) && ($0in_delay(sii_l2t3_req[24] == 0,5)) && ($0in_delay(sii_l2t3_req[25] == 0,5)) && ($0in_delay(sii_l2t3_req[26] == 1,5)) && ($0in_rising_edge($0in_delay(l2t3_sii_iq_dequeue,5))) && !(sii_wri_ecc2_l3_cycle4 == sii_l2b3_ecc[2]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc2_l3_wri_cycle4
*/

wire sii_wri_ecc3_l3_cycle4 =  (`TOP.cpu.sii_l2t3_req[4] ^ `TOP.cpu.sii_l2t3_req[5] ^ `TOP.cpu.sii_l2t3_req[6] ^ `TOP.cpu.sii_l2t3_req[7] ^ `TOP.cpu.sii_l2t3_req[8] ^ `TOP.cpu.sii_l2t3_req[9] ^ `TOP.cpu.sii_l2t3_req[10] ^ `TOP.cpu.sii_l2t3_req[18] ^ `TOP.cpu.sii_l2t3_req[19] ^ `TOP.cpu.sii_l2t3_req[20] ^ `TOP.cpu.sii_l2t3_req[21] ^ `TOP.cpu.sii_l2t3_req[22] ^ `TOP.cpu.sii_l2t3_req[23] ^ `TOP.cpu.sii_l2t3_req[24] ^ `TOP.cpu.sii_l2t3_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t3_req_vld,5))) && ($0in_delay(sii_l2t3_req[24] == 0,5)) && ($0in_delay(sii_l2t3_req[25] == 0,5)) && ($0in_delay(sii_l2t3_req[26] == 1,5)) && ($0in_rising_edge($0in_delay(l2t3_sii_iq_dequeue,5))) && !(sii_wri_ecc3_l3_cycle4 == sii_l2b3_ecc[3]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc3_l3_wri_cycle4
*/

wire sii_wri_ecc4_l3_cycle4 =  ( `TOP.cpu.sii_l2t3_req[11] ^ `TOP.cpu.sii_l2t3_req[12] ^ `TOP.cpu.sii_l2t3_req[13] ^ `TOP.cpu.sii_l2t3_req[14] ^ `TOP.cpu.sii_l2t3_req[15] ^ `TOP.cpu.sii_l2t3_req[16] ^ `TOP.cpu.sii_l2t3_req[17] ^ `TOP.cpu.sii_l2t3_req[18] ^ `TOP.cpu.sii_l2t3_req[19] ^ `TOP.cpu.sii_l2t3_req[20] ^ `TOP.cpu.sii_l2t3_req[21] ^ `TOP.cpu.sii_l2t3_req[22] ^ `TOP.cpu.sii_l2t3_req[23] ^ `TOP.cpu.sii_l2t3_req[24] ^ `TOP.cpu.sii_l2t3_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t3_req_vld,5))) && ($0in_delay(sii_l2t3_req[24] == 0,5)) && ($0in_delay(sii_l2t3_req[25] == 0,5)) && ($0in_delay(sii_l2t3_req[26] == 1,5)) && ($0in_rising_edge($0in_delay(l2t3_sii_iq_dequeue,5))) && !(sii_wri_ecc4_l3_cycle4 == sii_l2b3_ecc[4]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc4_l3_wri_cycle4
*/

wire sii_wri_ecc5_l3_cycle4 =  (`TOP.cpu.sii_l2t3_req[26] ^ `TOP.cpu.sii_l2t3_req[27] ^ `TOP.cpu.sii_l2t3_req[28] ^ `TOP.cpu.sii_l2t3_req[29] ^ `TOP.cpu.sii_l2t3_req[30] ^ `TOP.cpu.sii_l2t3_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t3_req_vld,5))) && ($0in_delay(sii_l2t3_req[24] == 0,5)) && ($0in_delay(sii_l2t3_req[25] == 0,5)) && ($0in_delay(sii_l2t3_req[26] == 1,5)) && ($0in_rising_edge($0in_delay(l2t3_sii_iq_dequeue,5))) && !(sii_wri_ecc5_l3_cycle4 == sii_l2b3_ecc[5]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc5_l3_wri_cycle4
*/

wire sii_wri_ecc6_l3_cycle4 =  (`TOP.cpu.sii_l2t3_req[0] ^ `TOP.cpu.sii_l2t3_req[1] ^ `TOP.cpu.sii_l2t3_req[2] ^ `TOP.cpu.sii_l2t3_req[4] ^ `TOP.cpu.sii_l2t3_req[5] ^ `TOP.cpu.sii_l2t3_req[7] ^ `TOP.cpu.sii_l2t3_req[10] ^ `TOP.cpu.sii_l2t3_req[11] ^ `TOP.cpu.sii_l2t3_req[12] ^ `TOP.cpu.sii_l2t3_req[14] ^ `TOP.cpu.sii_l2t3_req[17] ^ `TOP.cpu.sii_l2t3_req[18] ^ `TOP.cpu.sii_l2t3_req[21] ^ `TOP.cpu.sii_l2t3_req[23] ^ `TOP.cpu.sii_l2t3_req[24] ^ `TOP.cpu.sii_l2t3_req[26] ^ `TOP.cpu.sii_l2t3_req[27] ^ `TOP.cpu.sii_l2t3_req[29] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t3_req_vld,5))) && ($0in_delay(sii_l2t3_req[24] == 0,5)) && ($0in_delay(sii_l2t3_req[25] == 0,5)) && ($0in_delay(sii_l2t3_req[26] == 1,5)) && ($0in_rising_edge($0in_delay(l2t3_sii_iq_dequeue,5))) && !(sii_wri_ecc6_l3_cycle4 == sii_l2b3_ecc[6]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc6_l3_wri_cycle4
*/

wire sii_wri_ecc0_l3_cycle5 =  (`TOP.cpu.sii_l2t3_req[0] ^ `TOP.cpu.sii_l2t3_req[1] ^ `TOP.cpu.sii_l2t3_req[3] ^ `TOP.cpu.sii_l2t3_req[4] ^ `TOP.cpu.sii_l2t3_req[6] ^ `TOP.cpu.sii_l2t3_req[8] ^ `TOP.cpu.sii_l2t3_req[10] ^ `TOP.cpu.sii_l2t3_req[11] ^ `TOP.cpu.sii_l2t3_req[13] ^ `TOP.cpu.sii_l2t3_req[15] ^ `TOP.cpu.sii_l2t3_req[17] ^ `TOP.cpu.sii_l2t3_req[19] ^ `TOP.cpu.sii_l2t3_req[21] ^ `TOP.cpu.sii_l2t3_req[23] ^ `TOP.cpu.sii_l2t3_req[25] ^ `TOP.cpu.sii_l2t3_req[26] ^ `TOP.cpu.sii_l2t3_req[28] ^ `TOP.cpu.sii_l2t3_req[30] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t3_req_vld,6))) && ($0in_delay(sii_l2t3_req[24] == 0,6)) && ($0in_delay(sii_l2t3_req[25] == 0,6)) && ($0in_delay(sii_l2t3_req[26] == 1,6)) && ($0in_rising_edge($0in_delay(l2t3_sii_iq_dequeue,6))) && !(sii_wri_ecc0_l3_cycle5 == sii_l2b3_ecc[0]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc0_l3_wri_cycle5
*/

wire sii_wri_ecc1_l3_cycle5 =  (`TOP.cpu.sii_l2t3_req[0] ^ `TOP.cpu.sii_l2t3_req[2] ^ `TOP.cpu.sii_l2t3_req[3] ^ `TOP.cpu.sii_l2t3_req[5] ^ `TOP.cpu.sii_l2t3_req[6] ^ `TOP.cpu.sii_l2t3_req[9] ^ `TOP.cpu.sii_l2t3_req[10] ^ `TOP.cpu.sii_l2t3_req[12] ^ `TOP.cpu.sii_l2t3_req[13] ^ `TOP.cpu.sii_l2t3_req[16] ^ `TOP.cpu.sii_l2t3_req[17] ^ `TOP.cpu.sii_l2t3_req[20] ^ `TOP.cpu.sii_l2t3_req[21] ^ `TOP.cpu.sii_l2t3_req[24] ^ `TOP.cpu.sii_l2t3_req[25] ^ `TOP.cpu.sii_l2t3_req[27] ^ `TOP.cpu.sii_l2t3_req[28] ^ `TOP.cpu.sii_l2t3_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t3_req_vld,6))) && ($0in_delay(sii_l2t3_req[24] == 0,6)) && ($0in_delay(sii_l2t3_req[25] == 0,6)) && ($0in_delay(sii_l2t3_req[26] == 1,6)) && ($0in_rising_edge($0in_delay(l2t3_sii_iq_dequeue,6))) && !(sii_wri_ecc1_l3_cycle5 == sii_l2b3_ecc[1]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc1_l3_wri_cycle5
*/

wire sii_wri_ecc2_l3_cycle5 =  (`TOP.cpu.sii_l2t3_req[1] ^ `TOP.cpu.sii_l2t3_req[2] ^ `TOP.cpu.sii_l2t3_req[3] ^ `TOP.cpu.sii_l2t3_req[7] ^ `TOP.cpu.sii_l2t3_req[8] ^ `TOP.cpu.sii_l2t3_req[9] ^ `TOP.cpu.sii_l2t3_req[10] ^ `TOP.cpu.sii_l2t3_req[14] ^ `TOP.cpu.sii_l2t3_req[15] ^ `TOP.cpu.sii_l2t3_req[16] ^ `TOP.cpu.sii_l2t3_req[17] ^ `TOP.cpu.sii_l2t3_req[22] ^ `TOP.cpu.sii_l2t3_req[23] ^ `TOP.cpu.sii_l2t3_req[24] ^ `TOP.cpu.sii_l2t3_req[25] ^ `TOP.cpu.sii_l2t3_req[29] ^ `TOP.cpu.sii_l2t3_req[30] ^ `TOP.cpu.sii_l2t3_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t3_req_vld,6))) && ($0in_delay(sii_l2t3_req[24] == 0,6)) && ($0in_delay(sii_l2t3_req[25] == 0,6)) && ($0in_delay(sii_l2t3_req[26] == 1,6)) && ($0in_rising_edge($0in_delay(l2t3_sii_iq_dequeue,6))) && !(sii_wri_ecc2_l3_cycle5 == sii_l2b3_ecc[2]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc2_l3_wri_cycle5
*/

wire sii_wri_ecc3_l3_cycle5 =  (`TOP.cpu.sii_l2t3_req[4] ^ `TOP.cpu.sii_l2t3_req[5] ^ `TOP.cpu.sii_l2t3_req[6] ^ `TOP.cpu.sii_l2t3_req[7] ^ `TOP.cpu.sii_l2t3_req[8] ^ `TOP.cpu.sii_l2t3_req[9] ^ `TOP.cpu.sii_l2t3_req[10] ^ `TOP.cpu.sii_l2t3_req[18] ^ `TOP.cpu.sii_l2t3_req[19] ^ `TOP.cpu.sii_l2t3_req[20] ^ `TOP.cpu.sii_l2t3_req[21] ^ `TOP.cpu.sii_l2t3_req[22] ^ `TOP.cpu.sii_l2t3_req[23] ^ `TOP.cpu.sii_l2t3_req[24] ^ `TOP.cpu.sii_l2t3_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t3_req_vld,6))) && ($0in_delay(sii_l2t3_req[24] == 0,6)) && ($0in_delay(sii_l2t3_req[25] == 0,6)) && ($0in_delay(sii_l2t3_req[26] == 1,6)) && ($0in_rising_edge($0in_delay(l2t3_sii_iq_dequeue,6))) && !(sii_wri_ecc3_l3_cycle5 == sii_l2b3_ecc[3]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc3_l3_wri_cycle5
*/

wire sii_wri_ecc4_l3_cycle5 =  ( `TOP.cpu.sii_l2t3_req[11] ^ `TOP.cpu.sii_l2t3_req[12] ^ `TOP.cpu.sii_l2t3_req[13] ^ `TOP.cpu.sii_l2t3_req[14] ^ `TOP.cpu.sii_l2t3_req[15] ^ `TOP.cpu.sii_l2t3_req[16] ^ `TOP.cpu.sii_l2t3_req[17] ^ `TOP.cpu.sii_l2t3_req[18] ^ `TOP.cpu.sii_l2t3_req[19] ^ `TOP.cpu.sii_l2t3_req[20] ^ `TOP.cpu.sii_l2t3_req[21] ^ `TOP.cpu.sii_l2t3_req[22] ^ `TOP.cpu.sii_l2t3_req[23] ^ `TOP.cpu.sii_l2t3_req[24] ^ `TOP.cpu.sii_l2t3_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t3_req_vld,6))) && ($0in_delay(sii_l2t3_req[24] == 0,6)) && ($0in_delay(sii_l2t3_req[25] == 0,6)) && ($0in_delay(sii_l2t3_req[26] == 1,6)) && ($0in_rising_edge($0in_delay(l2t3_sii_iq_dequeue,6))) && !(sii_wri_ecc4_l3_cycle5 == sii_l2b3_ecc[4]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc4_l3_wri_cycle5
*/

wire sii_wri_ecc5_l3_cycle5 =  (`TOP.cpu.sii_l2t3_req[26] ^ `TOP.cpu.sii_l2t3_req[27] ^ `TOP.cpu.sii_l2t3_req[28] ^ `TOP.cpu.sii_l2t3_req[29] ^ `TOP.cpu.sii_l2t3_req[30] ^ `TOP.cpu.sii_l2t3_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t3_req_vld,6))) && ($0in_delay(sii_l2t3_req[24] == 0,6)) && ($0in_delay(sii_l2t3_req[25] == 0,2)) && ($0in_delay(sii_l2t3_req[26] == 1,6)) && ($0in_rising_edge($0in_delay(l2t3_sii_iq_dequeue,6))) && !(sii_wri_ecc5_l3_cycle5 == sii_l2b3_ecc[5]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc5_l3_wri_cycle5
*/

wire sii_wri_ecc6_l3_cycle5 =  (`TOP.cpu.sii_l2t3_req[0] ^ `TOP.cpu.sii_l2t3_req[1] ^ `TOP.cpu.sii_l2t3_req[2] ^ `TOP.cpu.sii_l2t3_req[4] ^ `TOP.cpu.sii_l2t3_req[5] ^ `TOP.cpu.sii_l2t3_req[7] ^ `TOP.cpu.sii_l2t3_req[10] ^ `TOP.cpu.sii_l2t3_req[11] ^ `TOP.cpu.sii_l2t3_req[12] ^ `TOP.cpu.sii_l2t3_req[14] ^ `TOP.cpu.sii_l2t3_req[17] ^ `TOP.cpu.sii_l2t3_req[18] ^ `TOP.cpu.sii_l2t3_req[21] ^ `TOP.cpu.sii_l2t3_req[23] ^ `TOP.cpu.sii_l2t3_req[24] ^ `TOP.cpu.sii_l2t3_req[26] ^ `TOP.cpu.sii_l2t3_req[27] ^ `TOP.cpu.sii_l2t3_req[29] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t3_req_vld,6))) && ($0in_delay(sii_l2t3_req[24] == 0,6)) && ($0in_delay(sii_l2t3_req[25] == 0,6)) && ($0in_delay(sii_l2t3_req[26] == 1,6)) && ($0in_rising_edge($0in_delay(l2t3_sii_iq_dequeue,6))) && !(sii_wri_ecc6_l3_cycle5 == sii_l2b3_ecc[6]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc6_l3_wri_cycle5
*/

wire sii_wri_ecc0_l3_cycle6 =  (`TOP.cpu.sii_l2t3_req[0] ^ `TOP.cpu.sii_l2t3_req[1] ^ `TOP.cpu.sii_l2t3_req[3] ^ `TOP.cpu.sii_l2t3_req[4] ^ `TOP.cpu.sii_l2t3_req[6] ^ `TOP.cpu.sii_l2t3_req[8] ^ `TOP.cpu.sii_l2t3_req[10] ^ `TOP.cpu.sii_l2t3_req[11] ^ `TOP.cpu.sii_l2t3_req[13] ^ `TOP.cpu.sii_l2t3_req[15] ^ `TOP.cpu.sii_l2t3_req[17] ^ `TOP.cpu.sii_l2t3_req[19] ^ `TOP.cpu.sii_l2t3_req[21] ^ `TOP.cpu.sii_l2t3_req[23] ^ `TOP.cpu.sii_l2t3_req[25] ^ `TOP.cpu.sii_l2t3_req[26] ^ `TOP.cpu.sii_l2t3_req[28] ^ `TOP.cpu.sii_l2t3_req[30] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t3_req_vld,7))) && ($0in_delay(sii_l2t3_req[24] == 0,7)) && ($0in_delay(sii_l2t3_req[25] == 0,7)) && ($0in_delay(sii_l2t3_req[26] == 1,7)) && ($0in_rising_edge($0in_delay(l2t3_sii_iq_dequeue,7))) && !(sii_wri_ecc0_l3_cycle6 == sii_l2b3_ecc[0]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc0_l3_wri_cycle6
*/

wire sii_wri_ecc1_l3_cycle6 =  (`TOP.cpu.sii_l2t3_req[0] ^ `TOP.cpu.sii_l2t3_req[2] ^ `TOP.cpu.sii_l2t3_req[3] ^ `TOP.cpu.sii_l2t3_req[5] ^ `TOP.cpu.sii_l2t3_req[6] ^ `TOP.cpu.sii_l2t3_req[9] ^ `TOP.cpu.sii_l2t3_req[10] ^ `TOP.cpu.sii_l2t3_req[12] ^ `TOP.cpu.sii_l2t3_req[13] ^ `TOP.cpu.sii_l2t3_req[16] ^ `TOP.cpu.sii_l2t3_req[17] ^ `TOP.cpu.sii_l2t3_req[20] ^ `TOP.cpu.sii_l2t3_req[21] ^ `TOP.cpu.sii_l2t3_req[24] ^ `TOP.cpu.sii_l2t3_req[25] ^ `TOP.cpu.sii_l2t3_req[27] ^ `TOP.cpu.sii_l2t3_req[28] ^ `TOP.cpu.sii_l2t3_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t3_req_vld,7))) && ($0in_delay(sii_l2t3_req[24] == 0,7)) && ($0in_delay(sii_l2t3_req[25] == 0,7)) && ($0in_delay(sii_l2t3_req[26] == 1,7)) && ($0in_rising_edge($0in_delay(l2t3_sii_iq_dequeue,7))) && !(sii_wri_ecc1_l3_cycle6 == sii_l2b3_ecc[1]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc1_l3_wri_cycle6
*/

wire sii_wri_ecc2_l3_cycle6 =  (`TOP.cpu.sii_l2t3_req[1] ^ `TOP.cpu.sii_l2t3_req[2] ^ `TOP.cpu.sii_l2t3_req[3] ^ `TOP.cpu.sii_l2t3_req[7] ^ `TOP.cpu.sii_l2t3_req[8] ^ `TOP.cpu.sii_l2t3_req[9] ^ `TOP.cpu.sii_l2t3_req[10] ^ `TOP.cpu.sii_l2t3_req[14] ^ `TOP.cpu.sii_l2t3_req[15] ^ `TOP.cpu.sii_l2t3_req[16] ^ `TOP.cpu.sii_l2t3_req[17] ^ `TOP.cpu.sii_l2t3_req[22] ^ `TOP.cpu.sii_l2t3_req[23] ^ `TOP.cpu.sii_l2t3_req[24] ^ `TOP.cpu.sii_l2t3_req[25] ^ `TOP.cpu.sii_l2t3_req[29] ^ `TOP.cpu.sii_l2t3_req[30] ^ `TOP.cpu.sii_l2t3_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t3_req_vld,7))) && ($0in_delay(sii_l2t3_req[24] == 0,7)) && ($0in_delay(sii_l2t3_req[25] == 0,7)) && ($0in_delay(sii_l2t3_req[26] == 1,7)) && ($0in_rising_edge($0in_delay(l2t3_sii_iq_dequeue,7))) && !(sii_wri_ecc2_l3_cycle6 == sii_l2b3_ecc[2]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc2_l3_wri_cycle6
*/

wire sii_wri_ecc3_l3_cycle6 =  (`TOP.cpu.sii_l2t3_req[4] ^ `TOP.cpu.sii_l2t3_req[5] ^ `TOP.cpu.sii_l2t3_req[6] ^ `TOP.cpu.sii_l2t3_req[7] ^ `TOP.cpu.sii_l2t3_req[8] ^ `TOP.cpu.sii_l2t3_req[9] ^ `TOP.cpu.sii_l2t3_req[10] ^ `TOP.cpu.sii_l2t3_req[18] ^ `TOP.cpu.sii_l2t3_req[19] ^ `TOP.cpu.sii_l2t3_req[20] ^ `TOP.cpu.sii_l2t3_req[21] ^ `TOP.cpu.sii_l2t3_req[22] ^ `TOP.cpu.sii_l2t3_req[23] ^ `TOP.cpu.sii_l2t3_req[24] ^ `TOP.cpu.sii_l2t3_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t3_req_vld,7))) && ($0in_delay(sii_l2t3_req[24] == 0,7)) && ($0in_delay(sii_l2t3_req[25] == 0,7)) && ($0in_delay(sii_l2t3_req[26] == 1,7)) && ($0in_rising_edge($0in_delay(l2t3_sii_iq_dequeue,7))) && !(sii_wri_ecc3_l3_cycle6 == sii_l2b3_ecc[3]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc3_l3_wri_cycle6
*/

wire sii_wri_ecc4_l3_cycle6 =  ( `TOP.cpu.sii_l2t3_req[11] ^ `TOP.cpu.sii_l2t3_req[12] ^ `TOP.cpu.sii_l2t3_req[13] ^ `TOP.cpu.sii_l2t3_req[14] ^ `TOP.cpu.sii_l2t3_req[15] ^ `TOP.cpu.sii_l2t3_req[16] ^ `TOP.cpu.sii_l2t3_req[17] ^ `TOP.cpu.sii_l2t3_req[18] ^ `TOP.cpu.sii_l2t3_req[19] ^ `TOP.cpu.sii_l2t3_req[20] ^ `TOP.cpu.sii_l2t3_req[21] ^ `TOP.cpu.sii_l2t3_req[22] ^ `TOP.cpu.sii_l2t3_req[23] ^ `TOP.cpu.sii_l2t3_req[24] ^ `TOP.cpu.sii_l2t3_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t3_req_vld,7))) && ($0in_delay(sii_l2t3_req[24] == 0,7)) && ($0in_delay(sii_l2t3_req[25] == 0,7)) && ($0in_delay(sii_l2t3_req[26] == 1,7)) && ($0in_rising_edge($0in_delay(l2t3_sii_iq_dequeue,7))) && !(sii_wri_ecc4_l3_cycle6 == sii_l2b3_ecc[4]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc4_l3_wri_cycle6
*/

wire sii_wri_ecc5_l3_cycle6 =  (`TOP.cpu.sii_l2t3_req[26] ^ `TOP.cpu.sii_l2t3_req[27] ^ `TOP.cpu.sii_l2t3_req[28] ^ `TOP.cpu.sii_l2t3_req[29] ^ `TOP.cpu.sii_l2t3_req[30] ^ `TOP.cpu.sii_l2t3_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t3_req_vld,7))) && ($0in_delay(sii_l2t3_req[24] == 0,7)) && ($0in_delay(sii_l2t3_req[25] == 0,7)) && ($0in_delay(sii_l2t3_req[26] == 1,7)) && ($0in_rising_edge($0in_delay(l2t3_sii_iq_dequeue,7))) && !(sii_wri_ecc5_l3_cycle6 == sii_l2b3_ecc[5]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc5_l3_wri_cycle6
*/

wire sii_wri_ecc6_l3_cycle6 =  (`TOP.cpu.sii_l2t3_req[0] ^ `TOP.cpu.sii_l2t3_req[1] ^ `TOP.cpu.sii_l2t3_req[2] ^ `TOP.cpu.sii_l2t3_req[4] ^ `TOP.cpu.sii_l2t3_req[5] ^ `TOP.cpu.sii_l2t3_req[7] ^ `TOP.cpu.sii_l2t3_req[10] ^ `TOP.cpu.sii_l2t3_req[11] ^ `TOP.cpu.sii_l2t3_req[12] ^ `TOP.cpu.sii_l2t3_req[14] ^ `TOP.cpu.sii_l2t3_req[17] ^ `TOP.cpu.sii_l2t3_req[18] ^ `TOP.cpu.sii_l2t3_req[21] ^ `TOP.cpu.sii_l2t3_req[23] ^ `TOP.cpu.sii_l2t3_req[24] ^ `TOP.cpu.sii_l2t3_req[26] ^ `TOP.cpu.sii_l2t3_req[27] ^ `TOP.cpu.sii_l2t3_req[29] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t3_req_vld,7))) && ($0in_delay(sii_l2t3_req[24] == 0,7)) && ($0in_delay(sii_l2t3_req[25] == 0,7)) && ($0in_delay(sii_l2t3_req[26] == 1,7)) && ($0in_rising_edge($0in_delay(l2t3_sii_iq_dequeue,7))) && !(sii_wri_ecc6_l3_cycle6 == sii_l2b3_ecc[6]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc6_l3_wri_cycle6
*/

wire sii_wri_ecc0_l3_cycle7 =  (`TOP.cpu.sii_l2t3_req[0] ^ `TOP.cpu.sii_l2t3_req[1] ^ `TOP.cpu.sii_l2t3_req[3] ^ `TOP.cpu.sii_l2t3_req[4] ^ `TOP.cpu.sii_l2t3_req[6] ^ `TOP.cpu.sii_l2t3_req[8] ^ `TOP.cpu.sii_l2t3_req[10] ^ `TOP.cpu.sii_l2t3_req[11] ^ `TOP.cpu.sii_l2t3_req[13] ^ `TOP.cpu.sii_l2t3_req[15] ^ `TOP.cpu.sii_l2t3_req[17] ^ `TOP.cpu.sii_l2t3_req[19] ^ `TOP.cpu.sii_l2t3_req[21] ^ `TOP.cpu.sii_l2t3_req[23] ^ `TOP.cpu.sii_l2t3_req[25] ^ `TOP.cpu.sii_l2t3_req[26] ^ `TOP.cpu.sii_l2t3_req[28] ^ `TOP.cpu.sii_l2t3_req[30] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t3_req_vld,8))) && ($0in_delay(sii_l2t3_req[24] == 0,8)) && ($0in_delay(sii_l2t3_req[25] == 0,8)) && ($0in_delay(sii_l2t3_req[26] == 1,8)) && ($0in_rising_edge($0in_delay(l2t3_sii_iq_dequeue,8))) && !(sii_wri_ecc0_l3_cycle7 == sii_l2b3_ecc[0]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc0_l3_wri_cycle7
*/

wire sii_wri_ecc1_l3_cycle7 =  (`TOP.cpu.sii_l2t3_req[0] ^ `TOP.cpu.sii_l2t3_req[2] ^ `TOP.cpu.sii_l2t3_req[3] ^ `TOP.cpu.sii_l2t3_req[5] ^ `TOP.cpu.sii_l2t3_req[6] ^ `TOP.cpu.sii_l2t3_req[9] ^ `TOP.cpu.sii_l2t3_req[10] ^ `TOP.cpu.sii_l2t3_req[12] ^ `TOP.cpu.sii_l2t3_req[13] ^ `TOP.cpu.sii_l2t3_req[16] ^ `TOP.cpu.sii_l2t3_req[17] ^ `TOP.cpu.sii_l2t3_req[20] ^ `TOP.cpu.sii_l2t3_req[21] ^ `TOP.cpu.sii_l2t3_req[24] ^ `TOP.cpu.sii_l2t3_req[25] ^ `TOP.cpu.sii_l2t3_req[27] ^ `TOP.cpu.sii_l2t3_req[28] ^ `TOP.cpu.sii_l2t3_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t3_req_vld,8))) && ($0in_delay(sii_l2t3_req[24] == 0,8)) && ($0in_delay(sii_l2t3_req[25] == 0,8)) && ($0in_delay(sii_l2t3_req[26] == 1,8)) && ($0in_rising_edge($0in_delay(l2t3_sii_iq_dequeue,8))) && !(sii_wri_ecc1_l3_cycle7 == sii_l2b3_ecc[1]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc1_l3_wri_cycle7
*/

wire sii_wri_ecc2_l3_cycle7 =  (`TOP.cpu.sii_l2t3_req[1] ^ `TOP.cpu.sii_l2t3_req[2] ^ `TOP.cpu.sii_l2t3_req[3] ^ `TOP.cpu.sii_l2t3_req[7] ^ `TOP.cpu.sii_l2t3_req[8] ^ `TOP.cpu.sii_l2t3_req[9] ^ `TOP.cpu.sii_l2t3_req[10] ^ `TOP.cpu.sii_l2t3_req[14] ^ `TOP.cpu.sii_l2t3_req[15] ^ `TOP.cpu.sii_l2t3_req[16] ^ `TOP.cpu.sii_l2t3_req[17] ^ `TOP.cpu.sii_l2t3_req[22] ^ `TOP.cpu.sii_l2t3_req[23] ^ `TOP.cpu.sii_l2t3_req[24] ^ `TOP.cpu.sii_l2t3_req[25] ^ `TOP.cpu.sii_l2t3_req[29] ^ `TOP.cpu.sii_l2t3_req[30] ^ `TOP.cpu.sii_l2t3_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t3_req_vld,8))) && ($0in_delay(sii_l2t3_req[24] == 0,8)) && ($0in_delay(sii_l2t3_req[25] == 0,8)) && ($0in_delay(sii_l2t3_req[26] == 1,8)) && ($0in_rising_edge($0in_delay(l2t3_sii_iq_dequeue,8))) && !(sii_wri_ecc2_l3_cycle7 == sii_l2b3_ecc[2]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc2_l3_wri_cycle7
*/

wire sii_wri_ecc3_l3_cycle7 =  (`TOP.cpu.sii_l2t3_req[4] ^ `TOP.cpu.sii_l2t3_req[5] ^ `TOP.cpu.sii_l2t3_req[6] ^ `TOP.cpu.sii_l2t3_req[7] ^ `TOP.cpu.sii_l2t3_req[8] ^ `TOP.cpu.sii_l2t3_req[9] ^ `TOP.cpu.sii_l2t3_req[10] ^ `TOP.cpu.sii_l2t3_req[18] ^ `TOP.cpu.sii_l2t3_req[19] ^ `TOP.cpu.sii_l2t3_req[20] ^ `TOP.cpu.sii_l2t3_req[21] ^ `TOP.cpu.sii_l2t3_req[22] ^ `TOP.cpu.sii_l2t3_req[23] ^ `TOP.cpu.sii_l2t3_req[24] ^ `TOP.cpu.sii_l2t3_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t3_req_vld,8))) && ($0in_delay(sii_l2t3_req[24] == 0,8)) && ($0in_delay(sii_l2t3_req[25] == 0,8)) && ($0in_delay(sii_l2t3_req[26] == 1,8)) && ($0in_rising_edge($0in_delay(l2t3_sii_iq_dequeue,8))) && !(sii_wri_ecc3_l3_cycle7 == sii_l2b3_ecc[3]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc3_l3_wri_cycle7
*/

wire sii_wri_ecc4_l3_cycle7 =  ( `TOP.cpu.sii_l2t3_req[11] ^ `TOP.cpu.sii_l2t3_req[12] ^ `TOP.cpu.sii_l2t3_req[13] ^ `TOP.cpu.sii_l2t3_req[14] ^ `TOP.cpu.sii_l2t3_req[15] ^ `TOP.cpu.sii_l2t3_req[16] ^ `TOP.cpu.sii_l2t3_req[17] ^ `TOP.cpu.sii_l2t3_req[18] ^ `TOP.cpu.sii_l2t3_req[19] ^ `TOP.cpu.sii_l2t3_req[20] ^ `TOP.cpu.sii_l2t3_req[21] ^ `TOP.cpu.sii_l2t3_req[22] ^ `TOP.cpu.sii_l2t3_req[23] ^ `TOP.cpu.sii_l2t3_req[24] ^ `TOP.cpu.sii_l2t3_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t3_req_vld,8))) && ($0in_delay(sii_l2t3_req[24] == 0,8)) && ($0in_delay(sii_l2t3_req[25] == 0,8)) && ($0in_delay(sii_l2t3_req[26] == 1,8)) && ($0in_rising_edge($0in_delay(l2t3_sii_iq_dequeue,8))) && !(sii_wri_ecc4_l3_cycle7 == sii_l2b3_ecc[4]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc4_l3_wri_cycle7
*/

wire sii_wri_ecc5_l3_cycle7 =  (`TOP.cpu.sii_l2t3_req[26] ^ `TOP.cpu.sii_l2t3_req[27] ^ `TOP.cpu.sii_l2t3_req[28] ^ `TOP.cpu.sii_l2t3_req[29] ^ `TOP.cpu.sii_l2t3_req[30] ^ `TOP.cpu.sii_l2t3_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t3_req_vld,8))) && ($0in_delay(sii_l2t3_req[24] == 0,8)) && ($0in_delay(sii_l2t3_req[25] == 0,8)) && ($0in_delay(sii_l2t3_req[26] == 1,8)) && ($0in_rising_edge($0in_delay(l2t3_sii_iq_dequeue,8))) && !(sii_wri_ecc5_l3_cycle7 == sii_l2b3_ecc[5]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc5_l3_wri_cycle7
*/

wire sii_wri_ecc6_l3_cycle7 =  (`TOP.cpu.sii_l2t3_req[0] ^ `TOP.cpu.sii_l2t3_req[1] ^ `TOP.cpu.sii_l2t3_req[2] ^ `TOP.cpu.sii_l2t3_req[4] ^ `TOP.cpu.sii_l2t3_req[5] ^ `TOP.cpu.sii_l2t3_req[7] ^ `TOP.cpu.sii_l2t3_req[10] ^ `TOP.cpu.sii_l2t3_req[11] ^ `TOP.cpu.sii_l2t3_req[12] ^ `TOP.cpu.sii_l2t3_req[14] ^ `TOP.cpu.sii_l2t3_req[17] ^ `TOP.cpu.sii_l2t3_req[18] ^ `TOP.cpu.sii_l2t3_req[21] ^ `TOP.cpu.sii_l2t3_req[23] ^ `TOP.cpu.sii_l2t3_req[24] ^ `TOP.cpu.sii_l2t3_req[26] ^ `TOP.cpu.sii_l2t3_req[27] ^ `TOP.cpu.sii_l2t3_req[29] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t3_req_vld,8))) && ($0in_delay(sii_l2t3_req[24] == 0,8)) && ($0in_delay(sii_l2t3_req[25] == 0,8)) && ($0in_delay(sii_l2t3_req[26] == 1,8)) && ($0in_rising_edge($0in_delay(l2t3_sii_iq_dequeue,8))) && !(sii_wri_ecc6_l3_cycle7 == sii_l2b3_ecc[6]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc6_l3_wri_cycle7
*/

wire sii_wri_ecc0_l3_cycle8 =  (`TOP.cpu.sii_l2t3_req[0] ^ `TOP.cpu.sii_l2t3_req[1] ^ `TOP.cpu.sii_l2t3_req[3] ^ `TOP.cpu.sii_l2t3_req[4] ^ `TOP.cpu.sii_l2t3_req[6] ^ `TOP.cpu.sii_l2t3_req[8] ^ `TOP.cpu.sii_l2t3_req[10] ^ `TOP.cpu.sii_l2t3_req[11] ^ `TOP.cpu.sii_l2t3_req[13] ^ `TOP.cpu.sii_l2t3_req[15] ^ `TOP.cpu.sii_l2t3_req[17] ^ `TOP.cpu.sii_l2t3_req[19] ^ `TOP.cpu.sii_l2t3_req[21] ^ `TOP.cpu.sii_l2t3_req[23] ^ `TOP.cpu.sii_l2t3_req[25] ^ `TOP.cpu.sii_l2t3_req[26] ^ `TOP.cpu.sii_l2t3_req[28] ^ `TOP.cpu.sii_l2t3_req[30] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t3_req_vld,9))) && ($0in_delay(sii_l2t3_req[24] == 0,9)) && ($0in_delay(sii_l2t3_req[25] == 0,9)) && ($0in_delay(sii_l2t3_req[26] == 1,9)) && ($0in_rising_edge($0in_delay(l2t3_sii_iq_dequeue,9))) && !(sii_wri_ecc0_l3_cycle8 == sii_l2b3_ecc[0]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc0_l3_wri_cycle8
*/

wire sii_wri_ecc1_l3_cycle8 =  (`TOP.cpu.sii_l2t3_req[0] ^ `TOP.cpu.sii_l2t3_req[2] ^ `TOP.cpu.sii_l2t3_req[3] ^ `TOP.cpu.sii_l2t3_req[5] ^ `TOP.cpu.sii_l2t3_req[6] ^ `TOP.cpu.sii_l2t3_req[9] ^ `TOP.cpu.sii_l2t3_req[10] ^ `TOP.cpu.sii_l2t3_req[12] ^ `TOP.cpu.sii_l2t3_req[13] ^ `TOP.cpu.sii_l2t3_req[16] ^ `TOP.cpu.sii_l2t3_req[17] ^ `TOP.cpu.sii_l2t3_req[20] ^ `TOP.cpu.sii_l2t3_req[21] ^ `TOP.cpu.sii_l2t3_req[24] ^ `TOP.cpu.sii_l2t3_req[25] ^ `TOP.cpu.sii_l2t3_req[27] ^ `TOP.cpu.sii_l2t3_req[28] ^ `TOP.cpu.sii_l2t3_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t3_req_vld,9))) && ($0in_delay(sii_l2t3_req[24] == 0,9)) && ($0in_delay(sii_l2t3_req[25] == 0,9)) && ($0in_delay(sii_l2t3_req[26] == 1,9)) && ($0in_rising_edge($0in_delay(l2t3_sii_iq_dequeue,9))) && !(sii_wri_ecc1_l3_cycle8 == sii_l2b3_ecc[1]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc1_l3_wri_cycle8
*/

wire sii_wri_ecc2_l3_cycle8 =  (`TOP.cpu.sii_l2t3_req[1] ^ `TOP.cpu.sii_l2t3_req[2] ^ `TOP.cpu.sii_l2t3_req[3] ^ `TOP.cpu.sii_l2t3_req[7] ^ `TOP.cpu.sii_l2t3_req[8] ^ `TOP.cpu.sii_l2t3_req[9] ^ `TOP.cpu.sii_l2t3_req[10] ^ `TOP.cpu.sii_l2t3_req[14] ^ `TOP.cpu.sii_l2t3_req[15] ^ `TOP.cpu.sii_l2t3_req[16] ^ `TOP.cpu.sii_l2t3_req[17] ^ `TOP.cpu.sii_l2t3_req[22] ^ `TOP.cpu.sii_l2t3_req[23] ^ `TOP.cpu.sii_l2t3_req[24] ^ `TOP.cpu.sii_l2t3_req[25] ^ `TOP.cpu.sii_l2t3_req[29] ^ `TOP.cpu.sii_l2t3_req[30] ^ `TOP.cpu.sii_l2t3_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t3_req_vld,9))) && ($0in_delay(sii_l2t3_req[24] == 0,9)) && ($0in_delay(sii_l2t3_req[25] == 0,9)) && ($0in_delay(sii_l2t3_req[26] == 1,9)) && ($0in_rising_edge($0in_delay(l2t3_sii_iq_dequeue,9))) && !(sii_wri_ecc2_l3_cycle8 == sii_l2b3_ecc[2]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc2_l3_wri_cycle8
*/

wire sii_wri_ecc3_l3_cycle8 =  (`TOP.cpu.sii_l2t3_req[4] ^ `TOP.cpu.sii_l2t3_req[5] ^ `TOP.cpu.sii_l2t3_req[6] ^ `TOP.cpu.sii_l2t3_req[7] ^ `TOP.cpu.sii_l2t3_req[8] ^ `TOP.cpu.sii_l2t3_req[9] ^ `TOP.cpu.sii_l2t3_req[10] ^ `TOP.cpu.sii_l2t3_req[18] ^ `TOP.cpu.sii_l2t3_req[19] ^ `TOP.cpu.sii_l2t3_req[20] ^ `TOP.cpu.sii_l2t3_req[21] ^ `TOP.cpu.sii_l2t3_req[22] ^ `TOP.cpu.sii_l2t3_req[23] ^ `TOP.cpu.sii_l2t3_req[24] ^ `TOP.cpu.sii_l2t3_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t3_req_vld,9))) && ($0in_delay(sii_l2t3_req[24] == 0,9)) && ($0in_delay(sii_l2t3_req[25] == 0,9)) && ($0in_delay(sii_l2t3_req[26] == 1,9)) && ($0in_rising_edge($0in_delay(l2t3_sii_iq_dequeue,9))) && !(sii_wri_ecc3_l3_cycle8 == sii_l2b3_ecc[3]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc3_l3_wri_cycle8
*/

wire sii_wri_ecc4_l3_cycle8 =  ( `TOP.cpu.sii_l2t3_req[11] ^ `TOP.cpu.sii_l2t3_req[12] ^ `TOP.cpu.sii_l2t3_req[13] ^ `TOP.cpu.sii_l2t3_req[14] ^ `TOP.cpu.sii_l2t3_req[15] ^ `TOP.cpu.sii_l2t3_req[16] ^ `TOP.cpu.sii_l2t3_req[17] ^ `TOP.cpu.sii_l2t3_req[18] ^ `TOP.cpu.sii_l2t3_req[19] ^ `TOP.cpu.sii_l2t3_req[20] ^ `TOP.cpu.sii_l2t3_req[21] ^ `TOP.cpu.sii_l2t3_req[22] ^ `TOP.cpu.sii_l2t3_req[23] ^ `TOP.cpu.sii_l2t3_req[24] ^ `TOP.cpu.sii_l2t3_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t3_req_vld,9))) && ($0in_delay(sii_l2t3_req[24] == 0,9)) && ($0in_delay(sii_l2t3_req[25] == 0,9)) && ($0in_delay(sii_l2t3_req[26] == 1,9)) && ($0in_rising_edge($0in_delay(l2t3_sii_iq_dequeue,9))) && !(sii_wri_ecc4_l3_cycle8 == sii_l2b3_ecc[4]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc4_l3_wri_cycle8
*/

wire sii_wri_ecc5_l3_cycle8 =  (`TOP.cpu.sii_l2t3_req[26] ^ `TOP.cpu.sii_l2t3_req[27] ^ `TOP.cpu.sii_l2t3_req[28] ^ `TOP.cpu.sii_l2t3_req[29] ^ `TOP.cpu.sii_l2t3_req[30] ^ `TOP.cpu.sii_l2t3_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t3_req_vld,9))) && ($0in_delay(sii_l2t3_req[24] == 0,9)) && ($0in_delay(sii_l2t3_req[25] == 0,9)) && ($0in_delay(sii_l2t3_req[26] == 1,9)) && ($0in_rising_edge($0in_delay(l2t3_sii_iq_dequeue,9))) && !(sii_wri_ecc5_l3_cycle8 == sii_l2b3_ecc[5]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc5_l3_wri_cycle8
*/

wire sii_wri_ecc6_l3_cycle8 =  (`TOP.cpu.sii_l2t3_req[0] ^ `TOP.cpu.sii_l2t3_req[1] ^ `TOP.cpu.sii_l2t3_req[2] ^ `TOP.cpu.sii_l2t3_req[4] ^ `TOP.cpu.sii_l2t3_req[5] ^ `TOP.cpu.sii_l2t3_req[7] ^ `TOP.cpu.sii_l2t3_req[10] ^ `TOP.cpu.sii_l2t3_req[11] ^ `TOP.cpu.sii_l2t3_req[12] ^ `TOP.cpu.sii_l2t3_req[14] ^ `TOP.cpu.sii_l2t3_req[17] ^ `TOP.cpu.sii_l2t3_req[18] ^ `TOP.cpu.sii_l2t3_req[21] ^ `TOP.cpu.sii_l2t3_req[23] ^ `TOP.cpu.sii_l2t3_req[24] ^ `TOP.cpu.sii_l2t3_req[26] ^ `TOP.cpu.sii_l2t3_req[27] ^ `TOP.cpu.sii_l2t3_req[29] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t3_req_vld,9))) && ($0in_delay(sii_l2t3_req[24] == 0,9)) && ($0in_delay(sii_l2t3_req[25] == 0,9)) && ($0in_delay(sii_l2t3_req[26] == 1,9)) && ($0in_rising_edge($0in_delay(l2t3_sii_iq_dequeue,9))) && !(sii_wri_ecc6_l3_cycle8 == sii_l2b3_ecc[6]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc6_l3_wri_cycle8
*/

wire sii_wri_ecc0_l3_cycle9 =  (`TOP.cpu.sii_l2t3_req[0] ^ `TOP.cpu.sii_l2t3_req[1] ^ `TOP.cpu.sii_l2t3_req[3] ^ `TOP.cpu.sii_l2t3_req[4] ^ `TOP.cpu.sii_l2t3_req[6] ^ `TOP.cpu.sii_l2t3_req[8] ^ `TOP.cpu.sii_l2t3_req[10] ^ `TOP.cpu.sii_l2t3_req[11] ^ `TOP.cpu.sii_l2t3_req[13] ^ `TOP.cpu.sii_l2t3_req[15] ^ `TOP.cpu.sii_l2t3_req[17] ^ `TOP.cpu.sii_l2t3_req[19] ^ `TOP.cpu.sii_l2t3_req[21] ^ `TOP.cpu.sii_l2t3_req[23] ^ `TOP.cpu.sii_l2t3_req[25] ^ `TOP.cpu.sii_l2t3_req[26] ^ `TOP.cpu.sii_l2t3_req[28] ^ `TOP.cpu.sii_l2t3_req[30] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t3_req_vld,10))) && ($0in_delay(sii_l2t3_req[24] == 0,10)) && ($0in_delay(sii_l2t3_req[25] == 0,10)) && ($0in_delay(sii_l2t3_req[26] == 1,10)) && ($0in_rising_edge($0in_delay(l2t3_sii_iq_dequeue,10))) && !(sii_wri_ecc0_l3_cycle9 == sii_l2b3_ecc[0]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc0_l3_wri_cycle9
*/

wire sii_wri_ecc1_l3_cycle9 =  (`TOP.cpu.sii_l2t3_req[0] ^ `TOP.cpu.sii_l2t3_req[2] ^ `TOP.cpu.sii_l2t3_req[3] ^ `TOP.cpu.sii_l2t3_req[5] ^ `TOP.cpu.sii_l2t3_req[6] ^ `TOP.cpu.sii_l2t3_req[9] ^ `TOP.cpu.sii_l2t3_req[10] ^ `TOP.cpu.sii_l2t3_req[12] ^ `TOP.cpu.sii_l2t3_req[13] ^ `TOP.cpu.sii_l2t3_req[16] ^ `TOP.cpu.sii_l2t3_req[17] ^ `TOP.cpu.sii_l2t3_req[20] ^ `TOP.cpu.sii_l2t3_req[21] ^ `TOP.cpu.sii_l2t3_req[24] ^ `TOP.cpu.sii_l2t3_req[25] ^ `TOP.cpu.sii_l2t3_req[27] ^ `TOP.cpu.sii_l2t3_req[28] ^ `TOP.cpu.sii_l2t3_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t3_req_vld,10))) && ($0in_delay(sii_l2t3_req[24] == 0,10)) && ($0in_delay(sii_l2t3_req[25] == 0,10)) && ($0in_delay(sii_l2t3_req[26] == 1,10)) && ($0in_rising_edge($0in_delay(l2t3_sii_iq_dequeue,10))) && !(sii_wri_ecc1_l3_cycle9 == sii_l2b3_ecc[1]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc1_l3_wri_cycle9
*/

wire sii_wri_ecc2_l3_cycle9 =  (`TOP.cpu.sii_l2t3_req[1] ^ `TOP.cpu.sii_l2t3_req[2] ^ `TOP.cpu.sii_l2t3_req[3] ^ `TOP.cpu.sii_l2t3_req[7] ^ `TOP.cpu.sii_l2t3_req[8] ^ `TOP.cpu.sii_l2t3_req[9] ^ `TOP.cpu.sii_l2t3_req[10] ^ `TOP.cpu.sii_l2t3_req[14] ^ `TOP.cpu.sii_l2t3_req[15] ^ `TOP.cpu.sii_l2t3_req[16] ^ `TOP.cpu.sii_l2t3_req[17] ^ `TOP.cpu.sii_l2t3_req[22] ^ `TOP.cpu.sii_l2t3_req[23] ^ `TOP.cpu.sii_l2t3_req[24] ^ `TOP.cpu.sii_l2t3_req[25] ^ `TOP.cpu.sii_l2t3_req[29] ^ `TOP.cpu.sii_l2t3_req[30] ^ `TOP.cpu.sii_l2t3_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t3_req_vld,10))) && ($0in_delay(sii_l2t3_req[24] == 0,10)) && ($0in_delay(sii_l2t3_req[25] == 0,10)) && ($0in_delay(sii_l2t3_req[26] == 1,10)) && ($0in_rising_edge($0in_delay(l2t3_sii_iq_dequeue,10))) && !(sii_wri_ecc2_l3_cycle9 == sii_l2b3_ecc[2]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc2_l3_wri_cycle9
*/

wire sii_wri_ecc3_l3_cycle9 =  (`TOP.cpu.sii_l2t3_req[4] ^ `TOP.cpu.sii_l2t3_req[5] ^ `TOP.cpu.sii_l2t3_req[6] ^ `TOP.cpu.sii_l2t3_req[7] ^ `TOP.cpu.sii_l2t3_req[8] ^ `TOP.cpu.sii_l2t3_req[9] ^ `TOP.cpu.sii_l2t3_req[10] ^ `TOP.cpu.sii_l2t3_req[18] ^ `TOP.cpu.sii_l2t3_req[19] ^ `TOP.cpu.sii_l2t3_req[20] ^ `TOP.cpu.sii_l2t3_req[21] ^ `TOP.cpu.sii_l2t3_req[22] ^ `TOP.cpu.sii_l2t3_req[23] ^ `TOP.cpu.sii_l2t3_req[24] ^ `TOP.cpu.sii_l2t3_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t3_req_vld,10))) && ($0in_delay(sii_l2t3_req[24] == 0,10)) && ($0in_delay(sii_l2t3_req[25] == 0,10)) && ($0in_delay(sii_l2t3_req[26] == 1,10)) && ($0in_rising_edge($0in_delay(l2t3_sii_iq_dequeue,10))) && !(sii_wri_ecc3_l3_cycle9 == sii_l2b3_ecc[3]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc3_l3_wri_cycle9
*/

wire sii_wri_ecc4_l3_cycle9 =  ( `TOP.cpu.sii_l2t3_req[11] ^ `TOP.cpu.sii_l2t3_req[12] ^ `TOP.cpu.sii_l2t3_req[13] ^ `TOP.cpu.sii_l2t3_req[14] ^ `TOP.cpu.sii_l2t3_req[15] ^ `TOP.cpu.sii_l2t3_req[16] ^ `TOP.cpu.sii_l2t3_req[17] ^ `TOP.cpu.sii_l2t3_req[18] ^ `TOP.cpu.sii_l2t3_req[19] ^ `TOP.cpu.sii_l2t3_req[20] ^ `TOP.cpu.sii_l2t3_req[21] ^ `TOP.cpu.sii_l2t3_req[22] ^ `TOP.cpu.sii_l2t3_req[23] ^ `TOP.cpu.sii_l2t3_req[24] ^ `TOP.cpu.sii_l2t3_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t3_req_vld,10))) && ($0in_delay(sii_l2t3_req[24] == 0,10)) && ($0in_delay(sii_l2t3_req[25] == 0,10)) && ($0in_delay(sii_l2t3_req[26] == 1,10)) && ($0in_rising_edge($0in_delay(l2t3_sii_iq_dequeue,10))) && !(sii_wri_ecc4_l3_cycle9 == sii_l2b3_ecc[4]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc4_l3_wri_cycle9
*/

wire sii_wri_ecc5_l3_cycle9 =  (`TOP.cpu.sii_l2t3_req[26] ^ `TOP.cpu.sii_l2t3_req[27] ^ `TOP.cpu.sii_l2t3_req[28] ^ `TOP.cpu.sii_l2t3_req[29] ^ `TOP.cpu.sii_l2t3_req[30] ^ `TOP.cpu.sii_l2t3_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t3_req_vld,10))) && ($0in_delay(sii_l2t3_req[24] == 0,10)) && ($0in_delay(sii_l2t3_req[25] == 0,10)) && ($0in_delay(sii_l2t3_req[26] == 1,10)) && ($0in_rising_edge($0in_delay(l2t3_sii_iq_dequeue,10))) && !(sii_wri_ecc5_l3_cycle9 == sii_l2b3_ecc[5]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc5_l3_wri_cycle9
*/

wire sii_wri_ecc6_l3_cycle9 =  (`TOP.cpu.sii_l2t3_req[0] ^ `TOP.cpu.sii_l2t3_req[1] ^ `TOP.cpu.sii_l2t3_req[2] ^ `TOP.cpu.sii_l2t3_req[4] ^ `TOP.cpu.sii_l2t3_req[5] ^ `TOP.cpu.sii_l2t3_req[7] ^ `TOP.cpu.sii_l2t3_req[10] ^ `TOP.cpu.sii_l2t3_req[11] ^ `TOP.cpu.sii_l2t3_req[12] ^ `TOP.cpu.sii_l2t3_req[14] ^ `TOP.cpu.sii_l2t3_req[17] ^ `TOP.cpu.sii_l2t3_req[18] ^ `TOP.cpu.sii_l2t3_req[21] ^ `TOP.cpu.sii_l2t3_req[23] ^ `TOP.cpu.sii_l2t3_req[24] ^ `TOP.cpu.sii_l2t3_req[26] ^ `TOP.cpu.sii_l2t3_req[27] ^ `TOP.cpu.sii_l2t3_req[29] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t3_req_vld,10))) && ($0in_delay(sii_l2t3_req[24] == 0,10)) && ($0in_delay(sii_l2t3_req[25] == 0,10)) && ($0in_delay(sii_l2t3_req[26] == 1,10)) && ($0in_rising_edge($0in_delay(l2t3_sii_iq_dequeue,10))) && !(sii_wri_ecc6_l3_cycle9 == sii_l2b3_ecc[6]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc6_l3_wri_cycle9
*/

wire sii_wri_ecc0_l3_cycle10 =  (`TOP.cpu.sii_l2t3_req[0] ^ `TOP.cpu.sii_l2t3_req[1] ^ `TOP.cpu.sii_l2t3_req[3] ^ `TOP.cpu.sii_l2t3_req[4] ^ `TOP.cpu.sii_l2t3_req[6] ^ `TOP.cpu.sii_l2t3_req[8] ^ `TOP.cpu.sii_l2t3_req[10] ^ `TOP.cpu.sii_l2t3_req[11] ^ `TOP.cpu.sii_l2t3_req[13] ^ `TOP.cpu.sii_l2t3_req[15] ^ `TOP.cpu.sii_l2t3_req[17] ^ `TOP.cpu.sii_l2t3_req[19] ^ `TOP.cpu.sii_l2t3_req[21] ^ `TOP.cpu.sii_l2t3_req[23] ^ `TOP.cpu.sii_l2t3_req[25] ^ `TOP.cpu.sii_l2t3_req[26] ^ `TOP.cpu.sii_l2t3_req[28] ^ `TOP.cpu.sii_l2t3_req[30] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t3_req_vld,11))) && ($0in_delay(sii_l2t3_req[24] == 0,11)) && ($0in_delay(sii_l2t3_req[25] == 0,11)) && ($0in_delay(sii_l2t3_req[26] == 1,11)) && ($0in_rising_edge($0in_delay(l2t3_sii_iq_dequeue,11))) && !(sii_wri_ecc0_l3_cycle10 == sii_l2b3_ecc[0]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc0_l3_wri_cycle10
*/

wire sii_wri_ecc1_l3_cycle10 =  (`TOP.cpu.sii_l2t3_req[0] ^ `TOP.cpu.sii_l2t3_req[2] ^ `TOP.cpu.sii_l2t3_req[3] ^ `TOP.cpu.sii_l2t3_req[5] ^ `TOP.cpu.sii_l2t3_req[6] ^ `TOP.cpu.sii_l2t3_req[9] ^ `TOP.cpu.sii_l2t3_req[10] ^ `TOP.cpu.sii_l2t3_req[12] ^ `TOP.cpu.sii_l2t3_req[13] ^ `TOP.cpu.sii_l2t3_req[16] ^ `TOP.cpu.sii_l2t3_req[17] ^ `TOP.cpu.sii_l2t3_req[20] ^ `TOP.cpu.sii_l2t3_req[21] ^ `TOP.cpu.sii_l2t3_req[24] ^ `TOP.cpu.sii_l2t3_req[25] ^ `TOP.cpu.sii_l2t3_req[27] ^ `TOP.cpu.sii_l2t3_req[28] ^ `TOP.cpu.sii_l2t3_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t3_req_vld,11))) && ($0in_delay(sii_l2t3_req[24] == 0,11)) && ($0in_delay(sii_l2t3_req[25] == 0,11)) && ($0in_delay(sii_l2t3_req[26] == 1,11)) && ($0in_rising_edge($0in_delay(l2t3_sii_iq_dequeue,11))) && !(sii_wri_ecc1_l3_cycle10 == sii_l2b3_ecc[1]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc1_l3_wri_cycle10
*/

wire sii_wri_ecc2_l3_cycle10 =  (`TOP.cpu.sii_l2t3_req[1] ^ `TOP.cpu.sii_l2t3_req[2] ^ `TOP.cpu.sii_l2t3_req[3] ^ `TOP.cpu.sii_l2t3_req[7] ^ `TOP.cpu.sii_l2t3_req[8] ^ `TOP.cpu.sii_l2t3_req[9] ^ `TOP.cpu.sii_l2t3_req[10] ^ `TOP.cpu.sii_l2t3_req[14] ^ `TOP.cpu.sii_l2t3_req[15] ^ `TOP.cpu.sii_l2t3_req[16] ^ `TOP.cpu.sii_l2t3_req[17] ^ `TOP.cpu.sii_l2t3_req[22] ^ `TOP.cpu.sii_l2t3_req[23] ^ `TOP.cpu.sii_l2t3_req[24] ^ `TOP.cpu.sii_l2t3_req[25] ^ `TOP.cpu.sii_l2t3_req[29] ^ `TOP.cpu.sii_l2t3_req[30] ^ `TOP.cpu.sii_l2t3_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t3_req_vld,11))) && ($0in_delay(sii_l2t3_req[24] == 0,11)) && ($0in_delay(sii_l2t3_req[25] == 0,11)) && ($0in_delay(sii_l2t3_req[26] == 1,11)) && ($0in_rising_edge($0in_delay(l2t3_sii_iq_dequeue,11))) && !(sii_wri_ecc2_l3_cycle10 == sii_l2b3_ecc[2]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc2_l3_wri_cycle10
*/

wire sii_wri_ecc3_l3_cycle10 =  (`TOP.cpu.sii_l2t3_req[4] ^ `TOP.cpu.sii_l2t3_req[5] ^ `TOP.cpu.sii_l2t3_req[6] ^ `TOP.cpu.sii_l2t3_req[7] ^ `TOP.cpu.sii_l2t3_req[8] ^ `TOP.cpu.sii_l2t3_req[9] ^ `TOP.cpu.sii_l2t3_req[10] ^ `TOP.cpu.sii_l2t3_req[18] ^ `TOP.cpu.sii_l2t3_req[19] ^ `TOP.cpu.sii_l2t3_req[20] ^ `TOP.cpu.sii_l2t3_req[21] ^ `TOP.cpu.sii_l2t3_req[22] ^ `TOP.cpu.sii_l2t3_req[23] ^ `TOP.cpu.sii_l2t3_req[24] ^ `TOP.cpu.sii_l2t3_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t3_req_vld,11))) && ($0in_delay(sii_l2t3_req[24] == 0,11)) && ($0in_delay(sii_l2t3_req[25] == 0,11)) && ($0in_delay(sii_l2t3_req[26] == 1,11)) && ($0in_rising_edge($0in_delay(l2t3_sii_iq_dequeue,11))) && !(sii_wri_ecc3_l3_cycle10 == sii_l2b3_ecc[3]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc3_l3_wri_cycle10
*/

wire sii_wri_ecc4_l3_cycle10 =  ( `TOP.cpu.sii_l2t3_req[11] ^ `TOP.cpu.sii_l2t3_req[12] ^ `TOP.cpu.sii_l2t3_req[13] ^ `TOP.cpu.sii_l2t3_req[14] ^ `TOP.cpu.sii_l2t3_req[15] ^ `TOP.cpu.sii_l2t3_req[16] ^ `TOP.cpu.sii_l2t3_req[17] ^ `TOP.cpu.sii_l2t3_req[18] ^ `TOP.cpu.sii_l2t3_req[19] ^ `TOP.cpu.sii_l2t3_req[20] ^ `TOP.cpu.sii_l2t3_req[21] ^ `TOP.cpu.sii_l2t3_req[22] ^ `TOP.cpu.sii_l2t3_req[23] ^ `TOP.cpu.sii_l2t3_req[24] ^ `TOP.cpu.sii_l2t3_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t3_req_vld,11))) && ($0in_delay(sii_l2t3_req[24] == 0,11)) && ($0in_delay(sii_l2t3_req[25] == 0,11)) && ($0in_delay(sii_l2t3_req[26] == 1,11)) && ($0in_rising_edge($0in_delay(l2t3_sii_iq_dequeue,11))) && !(sii_wri_ecc4_l3_cycle10 == sii_l2b3_ecc[4]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc4_l3_wri_cycle10
*/

wire sii_wri_ecc5_l3_cycle10 =  (`TOP.cpu.sii_l2t3_req[26] ^ `TOP.cpu.sii_l2t3_req[27] ^ `TOP.cpu.sii_l2t3_req[28] ^ `TOP.cpu.sii_l2t3_req[29] ^ `TOP.cpu.sii_l2t3_req[30] ^ `TOP.cpu.sii_l2t3_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t3_req_vld,11))) && ($0in_delay(sii_l2t3_req[24] == 0,11)) && ($0in_delay(sii_l2t3_req[25] == 0,11)) && ($0in_delay(sii_l2t3_req[26] == 1,11)) && ($0in_rising_edge($0in_delay(l2t3_sii_iq_dequeue,11))) && !(sii_wri_ecc5_l3_cycle10 == sii_l2b3_ecc[5]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc5_l3_wri_cycle10
*/

wire sii_wri_ecc6_l3_cycle10 =  (`TOP.cpu.sii_l2t3_req[0] ^ `TOP.cpu.sii_l2t3_req[1] ^ `TOP.cpu.sii_l2t3_req[2] ^ `TOP.cpu.sii_l2t3_req[4] ^ `TOP.cpu.sii_l2t3_req[5] ^ `TOP.cpu.sii_l2t3_req[7] ^ `TOP.cpu.sii_l2t3_req[10] ^ `TOP.cpu.sii_l2t3_req[11] ^ `TOP.cpu.sii_l2t3_req[12] ^ `TOP.cpu.sii_l2t3_req[14] ^ `TOP.cpu.sii_l2t3_req[17] ^ `TOP.cpu.sii_l2t3_req[18] ^ `TOP.cpu.sii_l2t3_req[21] ^ `TOP.cpu.sii_l2t3_req[23] ^ `TOP.cpu.sii_l2t3_req[24] ^ `TOP.cpu.sii_l2t3_req[26] ^ `TOP.cpu.sii_l2t3_req[27] ^ `TOP.cpu.sii_l2t3_req[29] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t3_req_vld,11))) && ($0in_delay(sii_l2t3_req[24] == 0,11)) && ($0in_delay(sii_l2t3_req[25] == 0,11)) && ($0in_delay(sii_l2t3_req[26] == 1,11)) && ($0in_rising_edge($0in_delay(l2t3_sii_iq_dequeue,11))) && !(sii_wri_ecc6_l3_cycle10 == sii_l2b3_ecc[6]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc6_l3_wri_cycle10
*/

wire sii_wri_ecc0_l3_cycle11 =  (`TOP.cpu.sii_l2t3_req[0] ^ `TOP.cpu.sii_l2t3_req[1] ^ `TOP.cpu.sii_l2t3_req[3] ^ `TOP.cpu.sii_l2t3_req[4] ^ `TOP.cpu.sii_l2t3_req[6] ^ `TOP.cpu.sii_l2t3_req[8] ^ `TOP.cpu.sii_l2t3_req[10] ^ `TOP.cpu.sii_l2t3_req[11] ^ `TOP.cpu.sii_l2t3_req[13] ^ `TOP.cpu.sii_l2t3_req[15] ^ `TOP.cpu.sii_l2t3_req[17] ^ `TOP.cpu.sii_l2t3_req[19] ^ `TOP.cpu.sii_l2t3_req[21] ^ `TOP.cpu.sii_l2t3_req[23] ^ `TOP.cpu.sii_l2t3_req[25] ^ `TOP.cpu.sii_l2t3_req[26] ^ `TOP.cpu.sii_l2t3_req[28] ^ `TOP.cpu.sii_l2t3_req[30] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t3_req_vld,12))) && ($0in_delay(sii_l2t3_req[24] == 0,12)) && ($0in_delay(sii_l2t3_req[25] == 0,12)) && ($0in_delay(sii_l2t3_req[26] == 1,12)) && ($0in_rising_edge($0in_delay(l2t3_sii_iq_dequeue,12))) && !(sii_wri_ecc0_l3_cycle11 == sii_l2b3_ecc[0]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc0_l3_wri_cycle11
*/

wire sii_wri_ecc1_l3_cycle11 =  (`TOP.cpu.sii_l2t3_req[0] ^ `TOP.cpu.sii_l2t3_req[2] ^ `TOP.cpu.sii_l2t3_req[3] ^ `TOP.cpu.sii_l2t3_req[5] ^ `TOP.cpu.sii_l2t3_req[6] ^ `TOP.cpu.sii_l2t3_req[9] ^ `TOP.cpu.sii_l2t3_req[10] ^ `TOP.cpu.sii_l2t3_req[12] ^ `TOP.cpu.sii_l2t3_req[13] ^ `TOP.cpu.sii_l2t3_req[16] ^ `TOP.cpu.sii_l2t3_req[17] ^ `TOP.cpu.sii_l2t3_req[20] ^ `TOP.cpu.sii_l2t3_req[21] ^ `TOP.cpu.sii_l2t3_req[24] ^ `TOP.cpu.sii_l2t3_req[25] ^ `TOP.cpu.sii_l2t3_req[27] ^ `TOP.cpu.sii_l2t3_req[28] ^ `TOP.cpu.sii_l2t3_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t3_req_vld,12))) && ($0in_delay(sii_l2t3_req[24] == 0,12)) && ($0in_delay(sii_l2t3_req[25] == 0,12)) && ($0in_delay(sii_l2t3_req[26] == 1,12)) && ($0in_rising_edge($0in_delay(l2t3_sii_iq_dequeue,12))) && !(sii_wri_ecc1_l3_cycle11 == sii_l2b3_ecc[1]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc1_l3_wri_cycle11
*/

wire sii_wri_ecc2_l3_cycle11 =  (`TOP.cpu.sii_l2t3_req[1] ^ `TOP.cpu.sii_l2t3_req[2] ^ `TOP.cpu.sii_l2t3_req[3] ^ `TOP.cpu.sii_l2t3_req[7] ^ `TOP.cpu.sii_l2t3_req[8] ^ `TOP.cpu.sii_l2t3_req[9] ^ `TOP.cpu.sii_l2t3_req[10] ^ `TOP.cpu.sii_l2t3_req[14] ^ `TOP.cpu.sii_l2t3_req[15] ^ `TOP.cpu.sii_l2t3_req[16] ^ `TOP.cpu.sii_l2t3_req[17] ^ `TOP.cpu.sii_l2t3_req[22] ^ `TOP.cpu.sii_l2t3_req[23] ^ `TOP.cpu.sii_l2t3_req[24] ^ `TOP.cpu.sii_l2t3_req[25] ^ `TOP.cpu.sii_l2t3_req[29] ^ `TOP.cpu.sii_l2t3_req[30] ^ `TOP.cpu.sii_l2t3_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t3_req_vld,12))) && ($0in_delay(sii_l2t3_req[24] == 0,12)) && ($0in_delay(sii_l2t3_req[25] == 0,12)) && ($0in_delay(sii_l2t3_req[26] == 1,12)) && ($0in_rising_edge($0in_delay(l2t3_sii_iq_dequeue,12))) && !(sii_wri_ecc2_l3_cycle11 == sii_l2b3_ecc[2]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc2_l3_wri_cycle11
*/

wire sii_wri_ecc3_l3_cycle11 =  (`TOP.cpu.sii_l2t3_req[4] ^ `TOP.cpu.sii_l2t3_req[5] ^ `TOP.cpu.sii_l2t3_req[6] ^ `TOP.cpu.sii_l2t3_req[7] ^ `TOP.cpu.sii_l2t3_req[8] ^ `TOP.cpu.sii_l2t3_req[9] ^ `TOP.cpu.sii_l2t3_req[10] ^ `TOP.cpu.sii_l2t3_req[18] ^ `TOP.cpu.sii_l2t3_req[19] ^ `TOP.cpu.sii_l2t3_req[20] ^ `TOP.cpu.sii_l2t3_req[21] ^ `TOP.cpu.sii_l2t3_req[22] ^ `TOP.cpu.sii_l2t3_req[23] ^ `TOP.cpu.sii_l2t3_req[24] ^ `TOP.cpu.sii_l2t3_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t3_req_vld,12))) && ($0in_delay(sii_l2t3_req[24] == 0,12)) && ($0in_delay(sii_l2t3_req[25] == 0,12)) && ($0in_delay(sii_l2t3_req[26] == 1,12)) && ($0in_rising_edge($0in_delay(l2t3_sii_iq_dequeue,12))) && !(sii_wri_ecc3_l3_cycle11 == sii_l2b3_ecc[3]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc3_l3_wri_cycle11
*/

wire sii_wri_ecc4_l3_cycle11 =  ( `TOP.cpu.sii_l2t3_req[11] ^ `TOP.cpu.sii_l2t3_req[12] ^ `TOP.cpu.sii_l2t3_req[13] ^ `TOP.cpu.sii_l2t3_req[14] ^ `TOP.cpu.sii_l2t3_req[15] ^ `TOP.cpu.sii_l2t3_req[16] ^ `TOP.cpu.sii_l2t3_req[17] ^ `TOP.cpu.sii_l2t3_req[18] ^ `TOP.cpu.sii_l2t3_req[19] ^ `TOP.cpu.sii_l2t3_req[20] ^ `TOP.cpu.sii_l2t3_req[21] ^ `TOP.cpu.sii_l2t3_req[22] ^ `TOP.cpu.sii_l2t3_req[23] ^ `TOP.cpu.sii_l2t3_req[24] ^ `TOP.cpu.sii_l2t3_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t3_req_vld,12))) && ($0in_delay(sii_l2t3_req[24] == 0,12)) && ($0in_delay(sii_l2t3_req[25] == 0,12)) && ($0in_delay(sii_l2t3_req[26] == 1,12)) && ($0in_rising_edge($0in_delay(l2t3_sii_iq_dequeue,12))) && !(sii_wri_ecc4_l3_cycle11 == sii_l2b3_ecc[4]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc4_l3_wri_cycle11
*/

wire sii_wri_ecc5_l3_cycle11 =  (`TOP.cpu.sii_l2t3_req[26] ^ `TOP.cpu.sii_l2t3_req[27] ^ `TOP.cpu.sii_l2t3_req[28] ^ `TOP.cpu.sii_l2t3_req[29] ^ `TOP.cpu.sii_l2t3_req[30] ^ `TOP.cpu.sii_l2t3_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t3_req_vld,12))) && ($0in_delay(sii_l2t3_req[24] == 0,12)) && ($0in_delay(sii_l2t3_req[25] == 0,12)) && ($0in_delay(sii_l2t3_req[26] == 1,12)) && ($0in_rising_edge($0in_delay(l2t3_sii_iq_dequeue,12))) && !(sii_wri_ecc5_l3_cycle11 == sii_l2b3_ecc[5]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc5_l3_wri_cycle11
*/

wire sii_wri_ecc6_l3_cycle11 =  (`TOP.cpu.sii_l2t3_req[0] ^ `TOP.cpu.sii_l2t3_req[1] ^ `TOP.cpu.sii_l2t3_req[2] ^ `TOP.cpu.sii_l2t3_req[4] ^ `TOP.cpu.sii_l2t3_req[5] ^ `TOP.cpu.sii_l2t3_req[7] ^ `TOP.cpu.sii_l2t3_req[10] ^ `TOP.cpu.sii_l2t3_req[11] ^ `TOP.cpu.sii_l2t3_req[12] ^ `TOP.cpu.sii_l2t3_req[14] ^ `TOP.cpu.sii_l2t3_req[17] ^ `TOP.cpu.sii_l2t3_req[18] ^ `TOP.cpu.sii_l2t3_req[21] ^ `TOP.cpu.sii_l2t3_req[23] ^ `TOP.cpu.sii_l2t3_req[24] ^ `TOP.cpu.sii_l2t3_req[26] ^ `TOP.cpu.sii_l2t3_req[27] ^ `TOP.cpu.sii_l2t3_req[29] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t3_req_vld,12))) && ($0in_delay(sii_l2t3_req[24] == 0,12)) && ($0in_delay(sii_l2t3_req[25] == 0,12)) && ($0in_delay(sii_l2t3_req[26] == 1,12)) && ($0in_rising_edge($0in_delay(l2t3_sii_iq_dequeue,12))) && !(sii_wri_ecc6_l3_cycle11 == sii_l2b3_ecc[6]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc6_l3_wri_cycle11
*/

wire sii_wri_ecc0_l3_cycle12 =  (`TOP.cpu.sii_l2t3_req[0] ^ `TOP.cpu.sii_l2t3_req[1] ^ `TOP.cpu.sii_l2t3_req[3] ^ `TOP.cpu.sii_l2t3_req[4] ^ `TOP.cpu.sii_l2t3_req[6] ^ `TOP.cpu.sii_l2t3_req[8] ^ `TOP.cpu.sii_l2t3_req[10] ^ `TOP.cpu.sii_l2t3_req[11] ^ `TOP.cpu.sii_l2t3_req[13] ^ `TOP.cpu.sii_l2t3_req[15] ^ `TOP.cpu.sii_l2t3_req[17] ^ `TOP.cpu.sii_l2t3_req[19] ^ `TOP.cpu.sii_l2t3_req[21] ^ `TOP.cpu.sii_l2t3_req[23] ^ `TOP.cpu.sii_l2t3_req[25] ^ `TOP.cpu.sii_l2t3_req[26] ^ `TOP.cpu.sii_l2t3_req[28] ^ `TOP.cpu.sii_l2t3_req[30] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t3_req_vld,13))) && ($0in_delay(sii_l2t3_req[24] == 0,13)) && ($0in_delay(sii_l2t3_req[25] == 0,13)) && ($0in_delay(sii_l2t3_req[26] == 1,13)) && ($0in_rising_edge($0in_delay(l2t3_sii_iq_dequeue,13))) && !(sii_wri_ecc0_l3_cycle12 == sii_l2b3_ecc[0]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc0_l3_wri_cycle12
*/

wire sii_wri_ecc1_l3_cycle12 =  (`TOP.cpu.sii_l2t3_req[0] ^ `TOP.cpu.sii_l2t3_req[2] ^ `TOP.cpu.sii_l2t3_req[3] ^ `TOP.cpu.sii_l2t3_req[5] ^ `TOP.cpu.sii_l2t3_req[6] ^ `TOP.cpu.sii_l2t3_req[9] ^ `TOP.cpu.sii_l2t3_req[10] ^ `TOP.cpu.sii_l2t3_req[12] ^ `TOP.cpu.sii_l2t3_req[13] ^ `TOP.cpu.sii_l2t3_req[16] ^ `TOP.cpu.sii_l2t3_req[17] ^ `TOP.cpu.sii_l2t3_req[20] ^ `TOP.cpu.sii_l2t3_req[21] ^ `TOP.cpu.sii_l2t3_req[24] ^ `TOP.cpu.sii_l2t3_req[25] ^ `TOP.cpu.sii_l2t3_req[27] ^ `TOP.cpu.sii_l2t3_req[28] ^ `TOP.cpu.sii_l2t3_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t3_req_vld,13))) && ($0in_delay(sii_l2t3_req[24] == 0,13)) && ($0in_delay(sii_l2t3_req[25] == 0,13)) && ($0in_delay(sii_l2t3_req[26] == 1,13)) && ($0in_rising_edge($0in_delay(l2t3_sii_iq_dequeue,13))) && !(sii_wri_ecc1_l3_cycle12 == sii_l2b3_ecc[1]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc1_l3_wri_cycle12
*/

wire sii_wri_ecc2_l3_cycle12 =  (`TOP.cpu.sii_l2t3_req[1] ^ `TOP.cpu.sii_l2t3_req[2] ^ `TOP.cpu.sii_l2t3_req[3] ^ `TOP.cpu.sii_l2t3_req[7] ^ `TOP.cpu.sii_l2t3_req[8] ^ `TOP.cpu.sii_l2t3_req[9] ^ `TOP.cpu.sii_l2t3_req[10] ^ `TOP.cpu.sii_l2t3_req[14] ^ `TOP.cpu.sii_l2t3_req[15] ^ `TOP.cpu.sii_l2t3_req[16] ^ `TOP.cpu.sii_l2t3_req[17] ^ `TOP.cpu.sii_l2t3_req[22] ^ `TOP.cpu.sii_l2t3_req[23] ^ `TOP.cpu.sii_l2t3_req[24] ^ `TOP.cpu.sii_l2t3_req[25] ^ `TOP.cpu.sii_l2t3_req[29] ^ `TOP.cpu.sii_l2t3_req[30] ^ `TOP.cpu.sii_l2t3_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t3_req_vld,13))) && ($0in_delay(sii_l2t3_req[24] == 0,13)) && ($0in_delay(sii_l2t3_req[25] == 0,13)) && ($0in_delay(sii_l2t3_req[26] == 1,13)) && ($0in_rising_edge($0in_delay(l2t3_sii_iq_dequeue,13))) && !(sii_wri_ecc2_l3_cycle12 == sii_l2b3_ecc[2]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc2_l3_wri_cycle12
*/

wire sii_wri_ecc3_l3_cycle12 =  (`TOP.cpu.sii_l2t3_req[4] ^ `TOP.cpu.sii_l2t3_req[5] ^ `TOP.cpu.sii_l2t3_req[6] ^ `TOP.cpu.sii_l2t3_req[7] ^ `TOP.cpu.sii_l2t3_req[8] ^ `TOP.cpu.sii_l2t3_req[9] ^ `TOP.cpu.sii_l2t3_req[10] ^ `TOP.cpu.sii_l2t3_req[18] ^ `TOP.cpu.sii_l2t3_req[19] ^ `TOP.cpu.sii_l2t3_req[20] ^ `TOP.cpu.sii_l2t3_req[21] ^ `TOP.cpu.sii_l2t3_req[22] ^ `TOP.cpu.sii_l2t3_req[23] ^ `TOP.cpu.sii_l2t3_req[24] ^ `TOP.cpu.sii_l2t3_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t3_req_vld,13))) && ($0in_delay(sii_l2t3_req[24] == 0,13)) && ($0in_delay(sii_l2t3_req[25] == 0,13)) && ($0in_delay(sii_l2t3_req[26] == 1,13)) && ($0in_rising_edge($0in_delay(l2t3_sii_iq_dequeue,13))) && !(sii_wri_ecc3_l3_cycle12 == sii_l2b3_ecc[3]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc3_l3_wri_cycle12
*/

wire sii_wri_ecc4_l3_cycle12 =  ( `TOP.cpu.sii_l2t3_req[11] ^ `TOP.cpu.sii_l2t3_req[12] ^ `TOP.cpu.sii_l2t3_req[13] ^ `TOP.cpu.sii_l2t3_req[14] ^ `TOP.cpu.sii_l2t3_req[15] ^ `TOP.cpu.sii_l2t3_req[16] ^ `TOP.cpu.sii_l2t3_req[17] ^ `TOP.cpu.sii_l2t3_req[18] ^ `TOP.cpu.sii_l2t3_req[19] ^ `TOP.cpu.sii_l2t3_req[20] ^ `TOP.cpu.sii_l2t3_req[21] ^ `TOP.cpu.sii_l2t3_req[22] ^ `TOP.cpu.sii_l2t3_req[23] ^ `TOP.cpu.sii_l2t3_req[24] ^ `TOP.cpu.sii_l2t3_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t3_req_vld,13))) && ($0in_delay(sii_l2t3_req[24] == 0,13)) && ($0in_delay(sii_l2t3_req[25] == 0,13)) && ($0in_delay(sii_l2t3_req[26] == 1,13)) && ($0in_rising_edge($0in_delay(l2t3_sii_iq_dequeue,13))) && !(sii_wri_ecc4_l3_cycle12 == sii_l2b3_ecc[4]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc4_l3_wri_cycle12
*/

wire sii_wri_ecc5_l3_cycle12 =  (`TOP.cpu.sii_l2t3_req[26] ^ `TOP.cpu.sii_l2t3_req[27] ^ `TOP.cpu.sii_l2t3_req[28] ^ `TOP.cpu.sii_l2t3_req[29] ^ `TOP.cpu.sii_l2t3_req[30] ^ `TOP.cpu.sii_l2t3_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t3_req_vld,13))) && ($0in_delay(sii_l2t3_req[24] == 0,13)) && ($0in_delay(sii_l2t3_req[25] == 0,13)) && ($0in_delay(sii_l2t3_req[26] == 1,13)) && ($0in_rising_edge($0in_delay(l2t3_sii_iq_dequeue,13))) && !(sii_wri_ecc5_l3_cycle12 == sii_l2b3_ecc[5]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc5_l3_wri_cycle12
*/

wire sii_wri_ecc6_l3_cycle12 =  (`TOP.cpu.sii_l2t3_req[0] ^ `TOP.cpu.sii_l2t3_req[1] ^ `TOP.cpu.sii_l2t3_req[2] ^ `TOP.cpu.sii_l2t3_req[4] ^ `TOP.cpu.sii_l2t3_req[5] ^ `TOP.cpu.sii_l2t3_req[7] ^ `TOP.cpu.sii_l2t3_req[10] ^ `TOP.cpu.sii_l2t3_req[11] ^ `TOP.cpu.sii_l2t3_req[12] ^ `TOP.cpu.sii_l2t3_req[14] ^ `TOP.cpu.sii_l2t3_req[17] ^ `TOP.cpu.sii_l2t3_req[18] ^ `TOP.cpu.sii_l2t3_req[21] ^ `TOP.cpu.sii_l2t3_req[23] ^ `TOP.cpu.sii_l2t3_req[24] ^ `TOP.cpu.sii_l2t3_req[26] ^ `TOP.cpu.sii_l2t3_req[27] ^ `TOP.cpu.sii_l2t3_req[29] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t3_req_vld,13))) && ($0in_delay(sii_l2t3_req[24] == 0,13)) && ($0in_delay(sii_l2t3_req[25] == 0,13)) && ($0in_delay(sii_l2t3_req[26] == 1,13)) && ($0in_rising_edge($0in_delay(l2t3_sii_iq_dequeue,13))) && !(sii_wri_ecc6_l3_cycle12 == sii_l2b3_ecc[6]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc6_l3_wri_cycle12
*/

wire sii_wri_ecc0_l3_cycle13 =  (`TOP.cpu.sii_l2t3_req[0] ^ `TOP.cpu.sii_l2t3_req[1] ^ `TOP.cpu.sii_l2t3_req[3] ^ `TOP.cpu.sii_l2t3_req[4] ^ `TOP.cpu.sii_l2t3_req[6] ^ `TOP.cpu.sii_l2t3_req[8] ^ `TOP.cpu.sii_l2t3_req[10] ^ `TOP.cpu.sii_l2t3_req[11] ^ `TOP.cpu.sii_l2t3_req[13] ^ `TOP.cpu.sii_l2t3_req[15] ^ `TOP.cpu.sii_l2t3_req[17] ^ `TOP.cpu.sii_l2t3_req[19] ^ `TOP.cpu.sii_l2t3_req[21] ^ `TOP.cpu.sii_l2t3_req[23] ^ `TOP.cpu.sii_l2t3_req[25] ^ `TOP.cpu.sii_l2t3_req[26] ^ `TOP.cpu.sii_l2t3_req[28] ^ `TOP.cpu.sii_l2t3_req[30] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t3_req_vld,14))) && ($0in_delay(sii_l2t3_req[24] == 0,14)) && ($0in_delay(sii_l2t3_req[25] == 0,14)) && ($0in_delay(sii_l2t3_req[26] == 1,14)) && ($0in_rising_edge($0in_delay(l2t3_sii_iq_dequeue,14))) && !(sii_wri_ecc0_l3_cycle13 == sii_l2b3_ecc[0]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc0_l3_wri_cycle13
*/

wire sii_wri_ecc1_l3_cycle13 =  (`TOP.cpu.sii_l2t3_req[0] ^ `TOP.cpu.sii_l2t3_req[2] ^ `TOP.cpu.sii_l2t3_req[3] ^ `TOP.cpu.sii_l2t3_req[5] ^ `TOP.cpu.sii_l2t3_req[6] ^ `TOP.cpu.sii_l2t3_req[9] ^ `TOP.cpu.sii_l2t3_req[10] ^ `TOP.cpu.sii_l2t3_req[12] ^ `TOP.cpu.sii_l2t3_req[13] ^ `TOP.cpu.sii_l2t3_req[16] ^ `TOP.cpu.sii_l2t3_req[17] ^ `TOP.cpu.sii_l2t3_req[20] ^ `TOP.cpu.sii_l2t3_req[21] ^ `TOP.cpu.sii_l2t3_req[24] ^ `TOP.cpu.sii_l2t3_req[25] ^ `TOP.cpu.sii_l2t3_req[27] ^ `TOP.cpu.sii_l2t3_req[28] ^ `TOP.cpu.sii_l2t3_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t3_req_vld,14))) && ($0in_delay(sii_l2t3_req[24] == 0,14)) && ($0in_delay(sii_l2t3_req[25] == 0,14)) && ($0in_delay(sii_l2t3_req[26] == 1,14)) && ($0in_rising_edge($0in_delay(l2t3_sii_iq_dequeue,14))) && !(sii_wri_ecc1_l3_cycle13 == sii_l2b3_ecc[1]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc1_l3_wri_cycle13
*/

wire sii_wri_ecc2_l3_cycle13 =  (`TOP.cpu.sii_l2t3_req[1] ^ `TOP.cpu.sii_l2t3_req[2] ^ `TOP.cpu.sii_l2t3_req[3] ^ `TOP.cpu.sii_l2t3_req[7] ^ `TOP.cpu.sii_l2t3_req[8] ^ `TOP.cpu.sii_l2t3_req[9] ^ `TOP.cpu.sii_l2t3_req[10] ^ `TOP.cpu.sii_l2t3_req[14] ^ `TOP.cpu.sii_l2t3_req[15] ^ `TOP.cpu.sii_l2t3_req[16] ^ `TOP.cpu.sii_l2t3_req[17] ^ `TOP.cpu.sii_l2t3_req[22] ^ `TOP.cpu.sii_l2t3_req[23] ^ `TOP.cpu.sii_l2t3_req[24] ^ `TOP.cpu.sii_l2t3_req[25] ^ `TOP.cpu.sii_l2t3_req[29] ^ `TOP.cpu.sii_l2t3_req[30] ^ `TOP.cpu.sii_l2t3_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t3_req_vld,14))) && ($0in_delay(sii_l2t3_req[24] == 0,14)) && ($0in_delay(sii_l2t3_req[25] == 0,14)) && ($0in_delay(sii_l2t3_req[26] == 1,14)) && ($0in_rising_edge($0in_delay(l2t3_sii_iq_dequeue,14))) && !(sii_wri_ecc2_l3_cycle13 == sii_l2b3_ecc[2]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc2_l3_wri_cycle13
*/

wire sii_wri_ecc3_l3_cycle13 =  (`TOP.cpu.sii_l2t3_req[4] ^ `TOP.cpu.sii_l2t3_req[5] ^ `TOP.cpu.sii_l2t3_req[6] ^ `TOP.cpu.sii_l2t3_req[7] ^ `TOP.cpu.sii_l2t3_req[8] ^ `TOP.cpu.sii_l2t3_req[9] ^ `TOP.cpu.sii_l2t3_req[10] ^ `TOP.cpu.sii_l2t3_req[18] ^ `TOP.cpu.sii_l2t3_req[19] ^ `TOP.cpu.sii_l2t3_req[20] ^ `TOP.cpu.sii_l2t3_req[21] ^ `TOP.cpu.sii_l2t3_req[22] ^ `TOP.cpu.sii_l2t3_req[23] ^ `TOP.cpu.sii_l2t3_req[24] ^ `TOP.cpu.sii_l2t3_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t3_req_vld,14))) && ($0in_delay(sii_l2t3_req[24] == 0,14)) && ($0in_delay(sii_l2t3_req[25] == 0,14)) && ($0in_delay(sii_l2t3_req[26] == 1,14)) && ($0in_rising_edge($0in_delay(l2t3_sii_iq_dequeue,14))) && !(sii_wri_ecc3_l3_cycle13 == sii_l2b3_ecc[3]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc3_l3_wri_cycle13
*/

wire sii_wri_ecc4_l3_cycle13 =  ( `TOP.cpu.sii_l2t3_req[11] ^ `TOP.cpu.sii_l2t3_req[12] ^ `TOP.cpu.sii_l2t3_req[13] ^ `TOP.cpu.sii_l2t3_req[14] ^ `TOP.cpu.sii_l2t3_req[15] ^ `TOP.cpu.sii_l2t3_req[16] ^ `TOP.cpu.sii_l2t3_req[17] ^ `TOP.cpu.sii_l2t3_req[18] ^ `TOP.cpu.sii_l2t3_req[19] ^ `TOP.cpu.sii_l2t3_req[20] ^ `TOP.cpu.sii_l2t3_req[21] ^ `TOP.cpu.sii_l2t3_req[22] ^ `TOP.cpu.sii_l2t3_req[23] ^ `TOP.cpu.sii_l2t3_req[24] ^ `TOP.cpu.sii_l2t3_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t3_req_vld,14))) && ($0in_delay(sii_l2t3_req[24] == 0,14)) && ($0in_delay(sii_l2t3_req[25] == 0,14)) && ($0in_delay(sii_l2t3_req[26] == 1,14)) && ($0in_rising_edge($0in_delay(l2t3_sii_iq_dequeue,14))) && !(sii_wri_ecc4_l3_cycle13 == sii_l2b3_ecc[4]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc4_l3_wri_cycle13
*/

wire sii_wri_ecc5_l3_cycle13 =  (`TOP.cpu.sii_l2t3_req[26] ^ `TOP.cpu.sii_l2t3_req[27] ^ `TOP.cpu.sii_l2t3_req[28] ^ `TOP.cpu.sii_l2t3_req[29] ^ `TOP.cpu.sii_l2t3_req[30] ^ `TOP.cpu.sii_l2t3_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t3_req_vld,14))) && ($0in_delay(sii_l2t3_req[24] == 0,14)) && ($0in_delay(sii_l2t3_req[25] == 0,14)) && ($0in_delay(sii_l2t3_req[26] == 1,14)) && ($0in_rising_edge($0in_delay(l2t3_sii_iq_dequeue,14))) && !(sii_wri_ecc5_l3_cycle13 == sii_l2b3_ecc[5]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc5_l3_wri_cycle13
*/

wire sii_wri_ecc6_l3_cycle13 =  (`TOP.cpu.sii_l2t3_req[0] ^ `TOP.cpu.sii_l2t3_req[1] ^ `TOP.cpu.sii_l2t3_req[2] ^ `TOP.cpu.sii_l2t3_req[4] ^ `TOP.cpu.sii_l2t3_req[5] ^ `TOP.cpu.sii_l2t3_req[7] ^ `TOP.cpu.sii_l2t3_req[10] ^ `TOP.cpu.sii_l2t3_req[11] ^ `TOP.cpu.sii_l2t3_req[12] ^ `TOP.cpu.sii_l2t3_req[14] ^ `TOP.cpu.sii_l2t3_req[17] ^ `TOP.cpu.sii_l2t3_req[18] ^ `TOP.cpu.sii_l2t3_req[21] ^ `TOP.cpu.sii_l2t3_req[23] ^ `TOP.cpu.sii_l2t3_req[24] ^ `TOP.cpu.sii_l2t3_req[26] ^ `TOP.cpu.sii_l2t3_req[27] ^ `TOP.cpu.sii_l2t3_req[29] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t3_req_vld,14))) && ($0in_delay(sii_l2t3_req[24] == 0,14)) && ($0in_delay(sii_l2t3_req[25] == 0,14)) && ($0in_delay(sii_l2t3_req[26] == 1,14)) && ($0in_rising_edge($0in_delay(l2t3_sii_iq_dequeue,14))) && !(sii_wri_ecc6_l3_cycle13 == sii_l2b3_ecc[6]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc6_l3_wri_cycle13
*/

wire sii_wri_ecc0_l3_cycle14 =  (`TOP.cpu.sii_l2t3_req[0] ^ `TOP.cpu.sii_l2t3_req[1] ^ `TOP.cpu.sii_l2t3_req[3] ^ `TOP.cpu.sii_l2t3_req[4] ^ `TOP.cpu.sii_l2t3_req[6] ^ `TOP.cpu.sii_l2t3_req[8] ^ `TOP.cpu.sii_l2t3_req[10] ^ `TOP.cpu.sii_l2t3_req[11] ^ `TOP.cpu.sii_l2t3_req[13] ^ `TOP.cpu.sii_l2t3_req[15] ^ `TOP.cpu.sii_l2t3_req[17] ^ `TOP.cpu.sii_l2t3_req[19] ^ `TOP.cpu.sii_l2t3_req[21] ^ `TOP.cpu.sii_l2t3_req[23] ^ `TOP.cpu.sii_l2t3_req[25] ^ `TOP.cpu.sii_l2t3_req[26] ^ `TOP.cpu.sii_l2t3_req[28] ^ `TOP.cpu.sii_l2t3_req[30] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t3_req_vld,15))) && ($0in_delay(sii_l2t3_req[24] == 0,15)) && ($0in_delay(sii_l2t3_req[25] == 0,15)) && ($0in_delay(sii_l2t3_req[26] == 1,15)) && ($0in_rising_edge($0in_delay(l2t3_sii_iq_dequeue,15))) && !(sii_wri_ecc0_l3_cycle14 == sii_l2b3_ecc[0]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc0_l3_wri_cycle14
*/

wire sii_wri_ecc1_l3_cycle14 =  (`TOP.cpu.sii_l2t3_req[0] ^ `TOP.cpu.sii_l2t3_req[2] ^ `TOP.cpu.sii_l2t3_req[3] ^ `TOP.cpu.sii_l2t3_req[5] ^ `TOP.cpu.sii_l2t3_req[6] ^ `TOP.cpu.sii_l2t3_req[9] ^ `TOP.cpu.sii_l2t3_req[10] ^ `TOP.cpu.sii_l2t3_req[12] ^ `TOP.cpu.sii_l2t3_req[13] ^ `TOP.cpu.sii_l2t3_req[16] ^ `TOP.cpu.sii_l2t3_req[17] ^ `TOP.cpu.sii_l2t3_req[20] ^ `TOP.cpu.sii_l2t3_req[21] ^ `TOP.cpu.sii_l2t3_req[24] ^ `TOP.cpu.sii_l2t3_req[25] ^ `TOP.cpu.sii_l2t3_req[27] ^ `TOP.cpu.sii_l2t3_req[28] ^ `TOP.cpu.sii_l2t3_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t3_req_vld,15))) && ($0in_delay(sii_l2t3_req[24] == 0,15)) && ($0in_delay(sii_l2t3_req[25] == 0,15)) && ($0in_delay(sii_l2t3_req[26] == 1,15)) && ($0in_rising_edge($0in_delay(l2t3_sii_iq_dequeue,15))) && !(sii_wri_ecc1_l3_cycle14 == sii_l2b3_ecc[1]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc1_l3_wri_cycle14
*/

wire sii_wri_ecc2_l3_cycle14 =  (`TOP.cpu.sii_l2t3_req[1] ^ `TOP.cpu.sii_l2t3_req[2] ^ `TOP.cpu.sii_l2t3_req[3] ^ `TOP.cpu.sii_l2t3_req[7] ^ `TOP.cpu.sii_l2t3_req[8] ^ `TOP.cpu.sii_l2t3_req[9] ^ `TOP.cpu.sii_l2t3_req[10] ^ `TOP.cpu.sii_l2t3_req[14] ^ `TOP.cpu.sii_l2t3_req[15] ^ `TOP.cpu.sii_l2t3_req[16] ^ `TOP.cpu.sii_l2t3_req[17] ^ `TOP.cpu.sii_l2t3_req[22] ^ `TOP.cpu.sii_l2t3_req[23] ^ `TOP.cpu.sii_l2t3_req[24] ^ `TOP.cpu.sii_l2t3_req[25] ^ `TOP.cpu.sii_l2t3_req[29] ^ `TOP.cpu.sii_l2t3_req[30] ^ `TOP.cpu.sii_l2t3_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t3_req_vld,15))) && ($0in_delay(sii_l2t3_req[24] == 0,15)) && ($0in_delay(sii_l2t3_req[25] == 0,15)) && ($0in_delay(sii_l2t3_req[26] == 1,15)) && ($0in_rising_edge($0in_delay(l2t3_sii_iq_dequeue,15))) && !(sii_wri_ecc2_l3_cycle14 == sii_l2b3_ecc[2]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc2_l3_wri_cycle14
*/

wire sii_wri_ecc3_l3_cycle14 =  (`TOP.cpu.sii_l2t3_req[4] ^ `TOP.cpu.sii_l2t3_req[5] ^ `TOP.cpu.sii_l2t3_req[6] ^ `TOP.cpu.sii_l2t3_req[7] ^ `TOP.cpu.sii_l2t3_req[8] ^ `TOP.cpu.sii_l2t3_req[9] ^ `TOP.cpu.sii_l2t3_req[10] ^ `TOP.cpu.sii_l2t3_req[18] ^ `TOP.cpu.sii_l2t3_req[19] ^ `TOP.cpu.sii_l2t3_req[20] ^ `TOP.cpu.sii_l2t3_req[21] ^ `TOP.cpu.sii_l2t3_req[22] ^ `TOP.cpu.sii_l2t3_req[23] ^ `TOP.cpu.sii_l2t3_req[24] ^ `TOP.cpu.sii_l2t3_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t3_req_vld,15))) && ($0in_delay(sii_l2t3_req[24] == 0,15)) && ($0in_delay(sii_l2t3_req[25] == 0,15)) && ($0in_delay(sii_l2t3_req[26] == 1,15)) && ($0in_rising_edge($0in_delay(l2t3_sii_iq_dequeue,15))) && !(sii_wri_ecc3_l3_cycle14 == sii_l2b3_ecc[3]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc3_l3_wri_cycle14
*/

wire sii_wri_ecc4_l3_cycle14 =  ( `TOP.cpu.sii_l2t3_req[11] ^ `TOP.cpu.sii_l2t3_req[12] ^ `TOP.cpu.sii_l2t3_req[13] ^ `TOP.cpu.sii_l2t3_req[14] ^ `TOP.cpu.sii_l2t3_req[15] ^ `TOP.cpu.sii_l2t3_req[16] ^ `TOP.cpu.sii_l2t3_req[17] ^ `TOP.cpu.sii_l2t3_req[18] ^ `TOP.cpu.sii_l2t3_req[19] ^ `TOP.cpu.sii_l2t3_req[20] ^ `TOP.cpu.sii_l2t3_req[21] ^ `TOP.cpu.sii_l2t3_req[22] ^ `TOP.cpu.sii_l2t3_req[23] ^ `TOP.cpu.sii_l2t3_req[24] ^ `TOP.cpu.sii_l2t3_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t3_req_vld,15))) && ($0in_delay(sii_l2t3_req[24] == 0,15)) && ($0in_delay(sii_l2t3_req[25] == 0,15)) && ($0in_delay(sii_l2t3_req[26] == 1,15)) && ($0in_rising_edge($0in_delay(l2t3_sii_iq_dequeue,15))) && !(sii_wri_ecc4_l3_cycle14 == sii_l2b3_ecc[4]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc4_l3_wri_cycle14
*/

wire sii_wri_ecc5_l3_cycle14 =  (`TOP.cpu.sii_l2t3_req[26] ^ `TOP.cpu.sii_l2t3_req[27] ^ `TOP.cpu.sii_l2t3_req[28] ^ `TOP.cpu.sii_l2t3_req[29] ^ `TOP.cpu.sii_l2t3_req[30] ^ `TOP.cpu.sii_l2t3_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t3_req_vld,15))) && ($0in_delay(sii_l2t3_req[24] == 0,15)) && ($0in_delay(sii_l2t3_req[25] == 0,15)) && ($0in_delay(sii_l2t3_req[26] == 1,15)) && ($0in_rising_edge($0in_delay(l2t3_sii_iq_dequeue,15))) && !(sii_wri_ecc5_l3_cycle14 == sii_l2b3_ecc[5]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc5_l3_wri_cycle14
*/

wire sii_wri_ecc6_l3_cycle14 =  (`TOP.cpu.sii_l2t3_req[0] ^ `TOP.cpu.sii_l2t3_req[1] ^ `TOP.cpu.sii_l2t3_req[2] ^ `TOP.cpu.sii_l2t3_req[4] ^ `TOP.cpu.sii_l2t3_req[5] ^ `TOP.cpu.sii_l2t3_req[7] ^ `TOP.cpu.sii_l2t3_req[10] ^ `TOP.cpu.sii_l2t3_req[11] ^ `TOP.cpu.sii_l2t3_req[12] ^ `TOP.cpu.sii_l2t3_req[14] ^ `TOP.cpu.sii_l2t3_req[17] ^ `TOP.cpu.sii_l2t3_req[18] ^ `TOP.cpu.sii_l2t3_req[21] ^ `TOP.cpu.sii_l2t3_req[23] ^ `TOP.cpu.sii_l2t3_req[24] ^ `TOP.cpu.sii_l2t3_req[26] ^ `TOP.cpu.sii_l2t3_req[27] ^ `TOP.cpu.sii_l2t3_req[29] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t3_req_vld,15))) && ($0in_delay(sii_l2t3_req[24] == 0,15)) && ($0in_delay(sii_l2t3_req[25] == 0,15)) && ($0in_delay(sii_l2t3_req[26] == 1,15)) && ($0in_rising_edge($0in_delay(l2t3_sii_iq_dequeue,15))) && !(sii_wri_ecc6_l3_cycle14 == sii_l2b3_ecc[6]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc6_l3_wri_cycle14
*/

wire sii_wri_ecc0_l3_cycle15 =  (`TOP.cpu.sii_l2t3_req[0] ^ `TOP.cpu.sii_l2t3_req[1] ^ `TOP.cpu.sii_l2t3_req[3] ^ `TOP.cpu.sii_l2t3_req[4] ^ `TOP.cpu.sii_l2t3_req[6] ^ `TOP.cpu.sii_l2t3_req[8] ^ `TOP.cpu.sii_l2t3_req[10] ^ `TOP.cpu.sii_l2t3_req[11] ^ `TOP.cpu.sii_l2t3_req[13] ^ `TOP.cpu.sii_l2t3_req[15] ^ `TOP.cpu.sii_l2t3_req[17] ^ `TOP.cpu.sii_l2t3_req[19] ^ `TOP.cpu.sii_l2t3_req[21] ^ `TOP.cpu.sii_l2t3_req[23] ^ `TOP.cpu.sii_l2t3_req[25] ^ `TOP.cpu.sii_l2t3_req[26] ^ `TOP.cpu.sii_l2t3_req[28] ^ `TOP.cpu.sii_l2t3_req[30] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t3_req_vld,16))) && ($0in_delay(sii_l2t3_req[24] == 0,16)) && ($0in_delay(sii_l2t3_req[25] == 0,16)) && ($0in_delay(sii_l2t3_req[26] == 1,16)) && ($0in_rising_edge($0in_delay(l2t3_sii_iq_dequeue,16))) && !(sii_wri_ecc0_l3_cycle15 == sii_l2b3_ecc[0]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc0_l3_wri_cycle15
*/

wire sii_wri_ecc1_l3_cycle15 =  (`TOP.cpu.sii_l2t3_req[0] ^ `TOP.cpu.sii_l2t3_req[2] ^ `TOP.cpu.sii_l2t3_req[3] ^ `TOP.cpu.sii_l2t3_req[5] ^ `TOP.cpu.sii_l2t3_req[6] ^ `TOP.cpu.sii_l2t3_req[9] ^ `TOP.cpu.sii_l2t3_req[10] ^ `TOP.cpu.sii_l2t3_req[12] ^ `TOP.cpu.sii_l2t3_req[13] ^ `TOP.cpu.sii_l2t3_req[16] ^ `TOP.cpu.sii_l2t3_req[17] ^ `TOP.cpu.sii_l2t3_req[20] ^ `TOP.cpu.sii_l2t3_req[21] ^ `TOP.cpu.sii_l2t3_req[24] ^ `TOP.cpu.sii_l2t3_req[25] ^ `TOP.cpu.sii_l2t3_req[27] ^ `TOP.cpu.sii_l2t3_req[28] ^ `TOP.cpu.sii_l2t3_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t3_req_vld,16))) && ($0in_delay(sii_l2t3_req[24] == 0,16)) && ($0in_delay(sii_l2t3_req[25] == 0,16)) && ($0in_delay(sii_l2t3_req[26] == 1,16)) && ($0in_rising_edge($0in_delay(l2t3_sii_iq_dequeue,16))) && !(sii_wri_ecc1_l3_cycle15 == sii_l2b3_ecc[1]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc1_l3_wri_cycle15
*/

wire sii_wri_ecc2_l3_cycle15 =  (`TOP.cpu.sii_l2t3_req[1] ^ `TOP.cpu.sii_l2t3_req[2] ^ `TOP.cpu.sii_l2t3_req[3] ^ `TOP.cpu.sii_l2t3_req[7] ^ `TOP.cpu.sii_l2t3_req[8] ^ `TOP.cpu.sii_l2t3_req[9] ^ `TOP.cpu.sii_l2t3_req[10] ^ `TOP.cpu.sii_l2t3_req[14] ^ `TOP.cpu.sii_l2t3_req[15] ^ `TOP.cpu.sii_l2t3_req[16] ^ `TOP.cpu.sii_l2t3_req[17] ^ `TOP.cpu.sii_l2t3_req[22] ^ `TOP.cpu.sii_l2t3_req[23] ^ `TOP.cpu.sii_l2t3_req[24] ^ `TOP.cpu.sii_l2t3_req[25] ^ `TOP.cpu.sii_l2t3_req[29] ^ `TOP.cpu.sii_l2t3_req[30] ^ `TOP.cpu.sii_l2t3_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t3_req_vld,16))) && ($0in_delay(sii_l2t3_req[24] == 0,16)) && ($0in_delay(sii_l2t3_req[25] == 0,16)) && ($0in_delay(sii_l2t3_req[26] == 1,16)) && ($0in_rising_edge($0in_delay(l2t3_sii_iq_dequeue,16))) && !(sii_wri_ecc2_l3_cycle15 == sii_l2b3_ecc[2]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc2_l3_wri_cycle15
*/

wire sii_wri_ecc3_l3_cycle15 =  (`TOP.cpu.sii_l2t3_req[4] ^ `TOP.cpu.sii_l2t3_req[5] ^ `TOP.cpu.sii_l2t3_req[6] ^ `TOP.cpu.sii_l2t3_req[7] ^ `TOP.cpu.sii_l2t3_req[8] ^ `TOP.cpu.sii_l2t3_req[9] ^ `TOP.cpu.sii_l2t3_req[10] ^ `TOP.cpu.sii_l2t3_req[18] ^ `TOP.cpu.sii_l2t3_req[19] ^ `TOP.cpu.sii_l2t3_req[20] ^ `TOP.cpu.sii_l2t3_req[21] ^ `TOP.cpu.sii_l2t3_req[22] ^ `TOP.cpu.sii_l2t3_req[23] ^ `TOP.cpu.sii_l2t3_req[24] ^ `TOP.cpu.sii_l2t3_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t3_req_vld,16))) && ($0in_delay(sii_l2t3_req[24] == 0,16)) && ($0in_delay(sii_l2t3_req[25] == 0,16)) && ($0in_delay(sii_l2t3_req[26] == 1,16)) && ($0in_rising_edge($0in_delay(l2t3_sii_iq_dequeue,16))) && !(sii_wri_ecc3_l3_cycle15 == sii_l2b3_ecc[3]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc3_l3_wri_cycle15
*/

wire sii_wri_ecc4_l3_cycle15 =  ( `TOP.cpu.sii_l2t3_req[11] ^ `TOP.cpu.sii_l2t3_req[12] ^ `TOP.cpu.sii_l2t3_req[13] ^ `TOP.cpu.sii_l2t3_req[14] ^ `TOP.cpu.sii_l2t3_req[15] ^ `TOP.cpu.sii_l2t3_req[16] ^ `TOP.cpu.sii_l2t3_req[17] ^ `TOP.cpu.sii_l2t3_req[18] ^ `TOP.cpu.sii_l2t3_req[19] ^ `TOP.cpu.sii_l2t3_req[20] ^ `TOP.cpu.sii_l2t3_req[21] ^ `TOP.cpu.sii_l2t3_req[22] ^ `TOP.cpu.sii_l2t3_req[23] ^ `TOP.cpu.sii_l2t3_req[24] ^ `TOP.cpu.sii_l2t3_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t3_req_vld,16))) && ($0in_delay(sii_l2t3_req[24] == 0,16)) && ($0in_delay(sii_l2t3_req[25] == 0,16)) && ($0in_delay(sii_l2t3_req[26] == 1,16)) && ($0in_rising_edge($0in_delay(l2t3_sii_iq_dequeue,16))) && !(sii_wri_ecc4_l3_cycle15 == sii_l2b3_ecc[4]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc4_l3_wri_cycle15
*/

wire sii_wri_ecc5_l3_cycle15 =  (`TOP.cpu.sii_l2t3_req[26] ^ `TOP.cpu.sii_l2t3_req[27] ^ `TOP.cpu.sii_l2t3_req[28] ^ `TOP.cpu.sii_l2t3_req[29] ^ `TOP.cpu.sii_l2t3_req[30] ^ `TOP.cpu.sii_l2t3_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t3_req_vld,16))) && ($0in_delay(sii_l2t3_req[24] == 0,16)) && ($0in_delay(sii_l2t3_req[25] == 0,16)) && ($0in_delay(sii_l2t3_req[26] == 1,16)) && ($0in_rising_edge($0in_delay(l2t3_sii_iq_dequeue,16))) && !(sii_wri_ecc5_l3_cycle15 == sii_l2b3_ecc[5]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc5_l3_wri_cycle15
*/

wire sii_wri_ecc6_l3_cycle15 =  (`TOP.cpu.sii_l2t3_req[0] ^ `TOP.cpu.sii_l2t3_req[1] ^ `TOP.cpu.sii_l2t3_req[2] ^ `TOP.cpu.sii_l2t3_req[4] ^ `TOP.cpu.sii_l2t3_req[5] ^ `TOP.cpu.sii_l2t3_req[7] ^ `TOP.cpu.sii_l2t3_req[10] ^ `TOP.cpu.sii_l2t3_req[11] ^ `TOP.cpu.sii_l2t3_req[12] ^ `TOP.cpu.sii_l2t3_req[14] ^ `TOP.cpu.sii_l2t3_req[17] ^ `TOP.cpu.sii_l2t3_req[18] ^ `TOP.cpu.sii_l2t3_req[21] ^ `TOP.cpu.sii_l2t3_req[23] ^ `TOP.cpu.sii_l2t3_req[24] ^ `TOP.cpu.sii_l2t3_req[26] ^ `TOP.cpu.sii_l2t3_req[27] ^ `TOP.cpu.sii_l2t3_req[29] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t3_req_vld,16))) && ($0in_delay(sii_l2t3_req[24] == 0,16)) && ($0in_delay(sii_l2t3_req[25] == 0,16)) && ($0in_delay(sii_l2t3_req[26] == 1,16)) && ($0in_rising_edge($0in_delay(l2t3_sii_iq_dequeue,16))) && !(sii_wri_ecc6_l3_cycle15 == sii_l2b3_ecc[6]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc6_l3_wri_cycle15
*/

wire sii_wri_ecc0_l3_cycle16 =  (`TOP.cpu.sii_l2t3_req[0] ^ `TOP.cpu.sii_l2t3_req[1] ^ `TOP.cpu.sii_l2t3_req[3] ^ `TOP.cpu.sii_l2t3_req[4] ^ `TOP.cpu.sii_l2t3_req[6] ^ `TOP.cpu.sii_l2t3_req[8] ^ `TOP.cpu.sii_l2t3_req[10] ^ `TOP.cpu.sii_l2t3_req[11] ^ `TOP.cpu.sii_l2t3_req[13] ^ `TOP.cpu.sii_l2t3_req[15] ^ `TOP.cpu.sii_l2t3_req[17] ^ `TOP.cpu.sii_l2t3_req[19] ^ `TOP.cpu.sii_l2t3_req[21] ^ `TOP.cpu.sii_l2t3_req[23] ^ `TOP.cpu.sii_l2t3_req[25] ^ `TOP.cpu.sii_l2t3_req[26] ^ `TOP.cpu.sii_l2t3_req[28] ^ `TOP.cpu.sii_l2t3_req[30] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t3_req_vld,17))) && ($0in_delay(sii_l2t3_req[24] == 0,17)) && ($0in_delay(sii_l2t3_req[25] == 0,17)) && ($0in_delay(sii_l2t3_req[26] == 1,17)) && ($0in_rising_edge($0in_delay(l2t3_sii_iq_dequeue,17))) && !(sii_wri_ecc0_l3_cycle16 == sii_l2b3_ecc[0]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc0_l3_wri_cycle16
*/

wire sii_wri_ecc1_l3_cycle16 =  (`TOP.cpu.sii_l2t3_req[0] ^ `TOP.cpu.sii_l2t3_req[2] ^ `TOP.cpu.sii_l2t3_req[3] ^ `TOP.cpu.sii_l2t3_req[5] ^ `TOP.cpu.sii_l2t3_req[6] ^ `TOP.cpu.sii_l2t3_req[9] ^ `TOP.cpu.sii_l2t3_req[10] ^ `TOP.cpu.sii_l2t3_req[12] ^ `TOP.cpu.sii_l2t3_req[13] ^ `TOP.cpu.sii_l2t3_req[16] ^ `TOP.cpu.sii_l2t3_req[17] ^ `TOP.cpu.sii_l2t3_req[20] ^ `TOP.cpu.sii_l2t3_req[21] ^ `TOP.cpu.sii_l2t3_req[24] ^ `TOP.cpu.sii_l2t3_req[25] ^ `TOP.cpu.sii_l2t3_req[27] ^ `TOP.cpu.sii_l2t3_req[28] ^ `TOP.cpu.sii_l2t3_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t3_req_vld,17))) && ($0in_delay(sii_l2t3_req[24] == 0,17)) && ($0in_delay(sii_l2t3_req[25] == 0,17)) && ($0in_delay(sii_l2t3_req[26] == 1,17)) && ($0in_rising_edge($0in_delay(l2t3_sii_iq_dequeue,17))) && !(sii_wri_ecc1_l3_cycle16 == sii_l2b3_ecc[1]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc1_l3_wri_cycle16
*/

wire sii_wri_ecc2_l3_cycle16 =  (`TOP.cpu.sii_l2t3_req[1] ^ `TOP.cpu.sii_l2t3_req[2] ^ `TOP.cpu.sii_l2t3_req[3] ^ `TOP.cpu.sii_l2t3_req[7] ^ `TOP.cpu.sii_l2t3_req[8] ^ `TOP.cpu.sii_l2t3_req[9] ^ `TOP.cpu.sii_l2t3_req[10] ^ `TOP.cpu.sii_l2t3_req[14] ^ `TOP.cpu.sii_l2t3_req[15] ^ `TOP.cpu.sii_l2t3_req[16] ^ `TOP.cpu.sii_l2t3_req[17] ^ `TOP.cpu.sii_l2t3_req[22] ^ `TOP.cpu.sii_l2t3_req[23] ^ `TOP.cpu.sii_l2t3_req[24] ^ `TOP.cpu.sii_l2t3_req[25] ^ `TOP.cpu.sii_l2t3_req[29] ^ `TOP.cpu.sii_l2t3_req[30] ^ `TOP.cpu.sii_l2t3_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t3_req_vld,17))) && ($0in_delay(sii_l2t3_req[24] == 0,17)) && ($0in_delay(sii_l2t3_req[25] == 0,17)) && ($0in_delay(sii_l2t3_req[26] == 1,17)) && ($0in_rising_edge($0in_delay(l2t3_sii_iq_dequeue,17))) && !(sii_wri_ecc2_l3_cycle16 == sii_l2b3_ecc[2]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc2_l3_wri_cycle16
*/

wire sii_wri_ecc3_l3_cycle16 =  (`TOP.cpu.sii_l2t3_req[4] ^ `TOP.cpu.sii_l2t3_req[5] ^ `TOP.cpu.sii_l2t3_req[6] ^ `TOP.cpu.sii_l2t3_req[7] ^ `TOP.cpu.sii_l2t3_req[8] ^ `TOP.cpu.sii_l2t3_req[9] ^ `TOP.cpu.sii_l2t3_req[10] ^ `TOP.cpu.sii_l2t3_req[18] ^ `TOP.cpu.sii_l2t3_req[19] ^ `TOP.cpu.sii_l2t3_req[20] ^ `TOP.cpu.sii_l2t3_req[21] ^ `TOP.cpu.sii_l2t3_req[22] ^ `TOP.cpu.sii_l2t3_req[23] ^ `TOP.cpu.sii_l2t3_req[24] ^ `TOP.cpu.sii_l2t3_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t3_req_vld,17))) && ($0in_delay(sii_l2t3_req[24] == 0,17)) && ($0in_delay(sii_l2t3_req[25] == 0,17)) && ($0in_delay(sii_l2t3_req[26] == 1,17)) && ($0in_rising_edge($0in_delay(l2t3_sii_iq_dequeue,17))) && !(sii_wri_ecc3_l3_cycle16 == sii_l2b3_ecc[3]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc3_l3_wri_cycle16
*/

wire sii_wri_ecc4_l3_cycle16 =  ( `TOP.cpu.sii_l2t3_req[11] ^ `TOP.cpu.sii_l2t3_req[12] ^ `TOP.cpu.sii_l2t3_req[13] ^ `TOP.cpu.sii_l2t3_req[14] ^ `TOP.cpu.sii_l2t3_req[15] ^ `TOP.cpu.sii_l2t3_req[16] ^ `TOP.cpu.sii_l2t3_req[17] ^ `TOP.cpu.sii_l2t3_req[18] ^ `TOP.cpu.sii_l2t3_req[19] ^ `TOP.cpu.sii_l2t3_req[20] ^ `TOP.cpu.sii_l2t3_req[21] ^ `TOP.cpu.sii_l2t3_req[22] ^ `TOP.cpu.sii_l2t3_req[23] ^ `TOP.cpu.sii_l2t3_req[24] ^ `TOP.cpu.sii_l2t3_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t3_req_vld,17))) && ($0in_delay(sii_l2t3_req[24] == 0,17)) && ($0in_delay(sii_l2t3_req[25] == 0,17)) && ($0in_delay(sii_l2t3_req[26] == 1,17)) && ($0in_rising_edge($0in_delay(l2t3_sii_iq_dequeue,17))) && !(sii_wri_ecc4_l3_cycle16 == sii_l2b3_ecc[4]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc4_l3_wri_cycle16
*/

wire sii_wri_ecc5_l3_cycle16 =  (`TOP.cpu.sii_l2t3_req[26] ^ `TOP.cpu.sii_l2t3_req[27] ^ `TOP.cpu.sii_l2t3_req[28] ^ `TOP.cpu.sii_l2t3_req[29] ^ `TOP.cpu.sii_l2t3_req[30] ^ `TOP.cpu.sii_l2t3_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t3_req_vld,17))) && ($0in_delay(sii_l2t3_req[24] == 0,17)) && ($0in_delay(sii_l2t3_req[25] == 0,17)) && ($0in_delay(sii_l2t3_req[26] == 1,17)) && ($0in_rising_edge($0in_delay(l2t3_sii_iq_dequeue,17))) && !(sii_wri_ecc5_l3_cycle16 == sii_l2b3_ecc[5]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc5_l3_wri_cycle16
*/

wire sii_wri_ecc6_l3_cycle16 =  (`TOP.cpu.sii_l2t3_req[0] ^ `TOP.cpu.sii_l2t3_req[1] ^ `TOP.cpu.sii_l2t3_req[2] ^ `TOP.cpu.sii_l2t3_req[4] ^ `TOP.cpu.sii_l2t3_req[5] ^ `TOP.cpu.sii_l2t3_req[7] ^ `TOP.cpu.sii_l2t3_req[10] ^ `TOP.cpu.sii_l2t3_req[11] ^ `TOP.cpu.sii_l2t3_req[12] ^ `TOP.cpu.sii_l2t3_req[14] ^ `TOP.cpu.sii_l2t3_req[17] ^ `TOP.cpu.sii_l2t3_req[18] ^ `TOP.cpu.sii_l2t3_req[21] ^ `TOP.cpu.sii_l2t3_req[23] ^ `TOP.cpu.sii_l2t3_req[24] ^ `TOP.cpu.sii_l2t3_req[26] ^ `TOP.cpu.sii_l2t3_req[27] ^ `TOP.cpu.sii_l2t3_req[29] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t3_req_vld,17))) && ($0in_delay(sii_l2t3_req[24] == 0,17)) && ($0in_delay(sii_l2t3_req[25] == 0,17)) && ($0in_delay(sii_l2t3_req[26] == 1,17)) && ($0in_rising_edge($0in_delay(l2t3_sii_iq_dequeue,17))) && !(sii_wri_ecc6_l3_cycle16 == sii_l2b3_ecc[6]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc6_l3_wri_cycle16
*/

wire sii_wri_ecc0_l4_cycle1 =  (`TOP.cpu.sii_l2t4_req[0] ^ `TOP.cpu.sii_l2t4_req[1] ^ `TOP.cpu.sii_l2t4_req[3] ^ `TOP.cpu.sii_l2t4_req[4] ^ `TOP.cpu.sii_l2t4_req[6] ^ `TOP.cpu.sii_l2t4_req[8] ^ `TOP.cpu.sii_l2t4_req[10] ^ `TOP.cpu.sii_l2t4_req[11] ^ `TOP.cpu.sii_l2t4_req[13] ^ `TOP.cpu.sii_l2t4_req[15] ^ `TOP.cpu.sii_l2t4_req[17] ^ `TOP.cpu.sii_l2t4_req[19] ^ `TOP.cpu.sii_l2t4_req[21] ^ `TOP.cpu.sii_l2t4_req[23] ^ `TOP.cpu.sii_l2t4_req[25] ^ `TOP.cpu.sii_l2t4_req[26] ^ `TOP.cpu.sii_l2t4_req[28] ^ `TOP.cpu.sii_l2t4_req[30] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t4_req_vld,2))) && ($0in_delay(sii_l2t4_req[24] == 0,2)) && ($0in_delay(sii_l2t4_req[25] == 0,2)) && ($0in_delay(sii_l2t4_req[26] == 1,2)) && ($0in_rising_edge($0in_delay(l2t4_sii_iq_dequeue,2))) && !(sii_wri_ecc0_l4_cycle1 == sii_l2b4_ecc[0]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc0_l4_wri_cycle1
*/

wire sii_wri_ecc1_l4_cycle1 =  (`TOP.cpu.sii_l2t4_req[0] ^ `TOP.cpu.sii_l2t4_req[2] ^ `TOP.cpu.sii_l2t4_req[3] ^ `TOP.cpu.sii_l2t4_req[5] ^ `TOP.cpu.sii_l2t4_req[6] ^ `TOP.cpu.sii_l2t4_req[9] ^ `TOP.cpu.sii_l2t4_req[10] ^ `TOP.cpu.sii_l2t4_req[12] ^ `TOP.cpu.sii_l2t4_req[13] ^ `TOP.cpu.sii_l2t4_req[16] ^ `TOP.cpu.sii_l2t4_req[17] ^ `TOP.cpu.sii_l2t4_req[20] ^ `TOP.cpu.sii_l2t4_req[21] ^ `TOP.cpu.sii_l2t4_req[24] ^ `TOP.cpu.sii_l2t4_req[25] ^ `TOP.cpu.sii_l2t4_req[27] ^ `TOP.cpu.sii_l2t4_req[28] ^ `TOP.cpu.sii_l2t4_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t4_req_vld,2))) && ($0in_delay(sii_l2t4_req[24] == 0,2)) && ($0in_delay(sii_l2t4_req[25] == 0,2)) && ($0in_delay(sii_l2t4_req[26] == 1,2)) && ($0in_rising_edge($0in_delay(l2t4_sii_iq_dequeue,2))) && !(sii_wri_ecc1_l4_cycle1 == sii_l2b4_ecc[1]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc1_l4_wri_cycle1
*/

wire sii_wri_ecc2_l4_cycle1 =  (`TOP.cpu.sii_l2t4_req[1] ^ `TOP.cpu.sii_l2t4_req[2] ^ `TOP.cpu.sii_l2t4_req[3] ^ `TOP.cpu.sii_l2t4_req[7] ^ `TOP.cpu.sii_l2t4_req[8] ^ `TOP.cpu.sii_l2t4_req[9] ^ `TOP.cpu.sii_l2t4_req[10] ^ `TOP.cpu.sii_l2t4_req[14] ^ `TOP.cpu.sii_l2t4_req[15] ^ `TOP.cpu.sii_l2t4_req[16] ^ `TOP.cpu.sii_l2t4_req[17] ^ `TOP.cpu.sii_l2t4_req[22] ^ `TOP.cpu.sii_l2t4_req[23] ^ `TOP.cpu.sii_l2t4_req[24] ^ `TOP.cpu.sii_l2t4_req[25] ^ `TOP.cpu.sii_l2t4_req[29] ^ `TOP.cpu.sii_l2t4_req[30] ^ `TOP.cpu.sii_l2t4_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t4_req_vld,2))) && ($0in_delay(sii_l2t4_req[24] == 0,2)) && ($0in_delay(sii_l2t4_req[25] == 0,2)) && ($0in_delay(sii_l2t4_req[26] == 1,2)) && ($0in_rising_edge($0in_delay(l2t4_sii_iq_dequeue,2))) && !(sii_wri_ecc2_l4_cycle1 == sii_l2b4_ecc[2]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc2_l4_wri_cycle1
*/

wire sii_wri_ecc3_l4_cycle1 =  (`TOP.cpu.sii_l2t4_req[4] ^ `TOP.cpu.sii_l2t4_req[5] ^ `TOP.cpu.sii_l2t4_req[6] ^ `TOP.cpu.sii_l2t4_req[7] ^ `TOP.cpu.sii_l2t4_req[8] ^ `TOP.cpu.sii_l2t4_req[9] ^ `TOP.cpu.sii_l2t4_req[10] ^ `TOP.cpu.sii_l2t4_req[18] ^ `TOP.cpu.sii_l2t4_req[19] ^ `TOP.cpu.sii_l2t4_req[20] ^ `TOP.cpu.sii_l2t4_req[21] ^ `TOP.cpu.sii_l2t4_req[22] ^ `TOP.cpu.sii_l2t4_req[23] ^ `TOP.cpu.sii_l2t4_req[24] ^ `TOP.cpu.sii_l2t4_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t4_req_vld,2))) && ($0in_delay(sii_l2t4_req[24] == 0,2)) && ($0in_delay(sii_l2t4_req[25] == 0,2)) && ($0in_delay(sii_l2t4_req[26] == 1,2)) && ($0in_rising_edge($0in_delay(l2t4_sii_iq_dequeue,2))) && !(sii_wri_ecc3_l4_cycle1 == sii_l2b4_ecc[3]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc3_l4_wri_cycle1
*/

wire sii_wri_ecc4_l4_cycle1 =  ( `TOP.cpu.sii_l2t4_req[11] ^ `TOP.cpu.sii_l2t4_req[12] ^ `TOP.cpu.sii_l2t4_req[13] ^ `TOP.cpu.sii_l2t4_req[14] ^ `TOP.cpu.sii_l2t4_req[15] ^ `TOP.cpu.sii_l2t4_req[16] ^ `TOP.cpu.sii_l2t4_req[17] ^ `TOP.cpu.sii_l2t4_req[18] ^ `TOP.cpu.sii_l2t4_req[19] ^ `TOP.cpu.sii_l2t4_req[20] ^ `TOP.cpu.sii_l2t4_req[21] ^ `TOP.cpu.sii_l2t4_req[22] ^ `TOP.cpu.sii_l2t4_req[23] ^ `TOP.cpu.sii_l2t4_req[24] ^ `TOP.cpu.sii_l2t4_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t4_req_vld,2))) && ($0in_delay(sii_l2t4_req[24] == 0,2)) && ($0in_delay(sii_l2t4_req[25] == 0,2)) && ($0in_delay(sii_l2t4_req[26] == 1,2)) && ($0in_rising_edge($0in_delay(l2t4_sii_iq_dequeue,2))) && !(sii_wri_ecc4_l4_cycle1 == sii_l2b4_ecc[4]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc4_l4_wri_cycle1
*/

wire sii_wri_ecc5_l4_cycle1 =  (`TOP.cpu.sii_l2t4_req[26] ^ `TOP.cpu.sii_l2t4_req[27] ^ `TOP.cpu.sii_l2t4_req[28] ^ `TOP.cpu.sii_l2t4_req[29] ^ `TOP.cpu.sii_l2t4_req[30] ^ `TOP.cpu.sii_l2t4_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t4_req_vld,2))) && ($0in_delay(sii_l2t4_req[24] == 0,2)) && ($0in_delay(sii_l2t4_req[25] == 0,2)) && ($0in_delay(sii_l2t4_req[26] == 1,2)) && ($0in_rising_edge($0in_delay(l2t4_sii_iq_dequeue,2))) && !(sii_wri_ecc5_l4_cycle1 == sii_l2b4_ecc[5]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc5_l4_wri_cycle1
*/

wire sii_wri_ecc6_l4_cycle1 =  (`TOP.cpu.sii_l2t4_req[0] ^ `TOP.cpu.sii_l2t4_req[1] ^ `TOP.cpu.sii_l2t4_req[2] ^ `TOP.cpu.sii_l2t4_req[4] ^ `TOP.cpu.sii_l2t4_req[5] ^ `TOP.cpu.sii_l2t4_req[7] ^ `TOP.cpu.sii_l2t4_req[10] ^ `TOP.cpu.sii_l2t4_req[11] ^ `TOP.cpu.sii_l2t4_req[12] ^ `TOP.cpu.sii_l2t4_req[14] ^ `TOP.cpu.sii_l2t4_req[17] ^ `TOP.cpu.sii_l2t4_req[18] ^ `TOP.cpu.sii_l2t4_req[21] ^ `TOP.cpu.sii_l2t4_req[23] ^ `TOP.cpu.sii_l2t4_req[24] ^ `TOP.cpu.sii_l2t4_req[26] ^ `TOP.cpu.sii_l2t4_req[27] ^ `TOP.cpu.sii_l2t4_req[29] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t4_req_vld,2))) && ($0in_delay(sii_l2t4_req[24] == 0,2)) && ($0in_delay(sii_l2t4_req[25] == 0,2)) && ($0in_delay(sii_l2t4_req[26] == 1,2)) && ($0in_rising_edge($0in_delay(l2t4_sii_iq_dequeue,2))) && !(sii_wri_ecc6_l4_cycle1 == sii_l2b4_ecc[6]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc6_l4_wri_cycle1
*/

wire sii_wri_ecc0_l4_cycle2 =  (`TOP.cpu.sii_l2t4_req[0] ^ `TOP.cpu.sii_l2t4_req[1] ^ `TOP.cpu.sii_l2t4_req[3] ^ `TOP.cpu.sii_l2t4_req[4] ^ `TOP.cpu.sii_l2t4_req[6] ^ `TOP.cpu.sii_l2t4_req[8] ^ `TOP.cpu.sii_l2t4_req[10] ^ `TOP.cpu.sii_l2t4_req[11] ^ `TOP.cpu.sii_l2t4_req[13] ^ `TOP.cpu.sii_l2t4_req[15] ^ `TOP.cpu.sii_l2t4_req[17] ^ `TOP.cpu.sii_l2t4_req[19] ^ `TOP.cpu.sii_l2t4_req[21] ^ `TOP.cpu.sii_l2t4_req[23] ^ `TOP.cpu.sii_l2t4_req[25] ^ `TOP.cpu.sii_l2t4_req[26] ^ `TOP.cpu.sii_l2t4_req[28] ^ `TOP.cpu.sii_l2t4_req[30] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t4_req_vld,3))) && ($0in_delay(sii_l2t4_req[24] == 0,3)) && ($0in_delay(sii_l2t4_req[25] == 0,3)) && ($0in_delay(sii_l2t4_req[26] == 1,3)) && ($0in_rising_edge($0in_delay(l2t4_sii_iq_dequeue,3))) && !(sii_wri_ecc0_l4_cycle2 == sii_l2b4_ecc[0]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc0_l4_wri_cycle2
*/

wire sii_wri_ecc1_l4_cycle2 =  (`TOP.cpu.sii_l2t4_req[0] ^ `TOP.cpu.sii_l2t4_req[2] ^ `TOP.cpu.sii_l2t4_req[3] ^ `TOP.cpu.sii_l2t4_req[5] ^ `TOP.cpu.sii_l2t4_req[6] ^ `TOP.cpu.sii_l2t4_req[9] ^ `TOP.cpu.sii_l2t4_req[10] ^ `TOP.cpu.sii_l2t4_req[12] ^ `TOP.cpu.sii_l2t4_req[13] ^ `TOP.cpu.sii_l2t4_req[16] ^ `TOP.cpu.sii_l2t4_req[17] ^ `TOP.cpu.sii_l2t4_req[20] ^ `TOP.cpu.sii_l2t4_req[21] ^ `TOP.cpu.sii_l2t4_req[24] ^ `TOP.cpu.sii_l2t4_req[25] ^ `TOP.cpu.sii_l2t4_req[27] ^ `TOP.cpu.sii_l2t4_req[28] ^ `TOP.cpu.sii_l2t4_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t4_req_vld,3))) && ($0in_delay(sii_l2t4_req[24] == 0,3)) && ($0in_delay(sii_l2t4_req[25] == 0,3)) && ($0in_delay(sii_l2t4_req[26] == 1,3)) && ($0in_rising_edge($0in_delay(l2t4_sii_iq_dequeue,3))) && !(sii_wri_ecc1_l4_cycle2 == sii_l2b4_ecc[1]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc1_l4_wri_cycle2
*/

wire sii_wri_ecc2_l4_cycle2 =  (`TOP.cpu.sii_l2t4_req[1] ^ `TOP.cpu.sii_l2t4_req[2] ^ `TOP.cpu.sii_l2t4_req[3] ^ `TOP.cpu.sii_l2t4_req[7] ^ `TOP.cpu.sii_l2t4_req[8] ^ `TOP.cpu.sii_l2t4_req[9] ^ `TOP.cpu.sii_l2t4_req[10] ^ `TOP.cpu.sii_l2t4_req[14] ^ `TOP.cpu.sii_l2t4_req[15] ^ `TOP.cpu.sii_l2t4_req[16] ^ `TOP.cpu.sii_l2t4_req[17] ^ `TOP.cpu.sii_l2t4_req[22] ^ `TOP.cpu.sii_l2t4_req[23] ^ `TOP.cpu.sii_l2t4_req[24] ^ `TOP.cpu.sii_l2t4_req[25] ^ `TOP.cpu.sii_l2t4_req[29] ^ `TOP.cpu.sii_l2t4_req[30] ^ `TOP.cpu.sii_l2t4_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t4_req_vld,3))) && ($0in_delay(sii_l2t4_req[24] == 0,3)) && ($0in_delay(sii_l2t4_req[25] == 0,3)) && ($0in_delay(sii_l2t4_req[26] == 1,3)) && ($0in_rising_edge($0in_delay(l2t4_sii_iq_dequeue,3))) && !(sii_wri_ecc2_l4_cycle2 == sii_l2b4_ecc[2]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc2_l4_wri_cycle2
*/

wire sii_wri_ecc3_l4_cycle2 =  (`TOP.cpu.sii_l2t4_req[4] ^ `TOP.cpu.sii_l2t4_req[5] ^ `TOP.cpu.sii_l2t4_req[6] ^ `TOP.cpu.sii_l2t4_req[7] ^ `TOP.cpu.sii_l2t4_req[8] ^ `TOP.cpu.sii_l2t4_req[9] ^ `TOP.cpu.sii_l2t4_req[10] ^ `TOP.cpu.sii_l2t4_req[18] ^ `TOP.cpu.sii_l2t4_req[19] ^ `TOP.cpu.sii_l2t4_req[20] ^ `TOP.cpu.sii_l2t4_req[21] ^ `TOP.cpu.sii_l2t4_req[22] ^ `TOP.cpu.sii_l2t4_req[23] ^ `TOP.cpu.sii_l2t4_req[24] ^ `TOP.cpu.sii_l2t4_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t4_req_vld,3))) && ($0in_delay(sii_l2t4_req[24] == 0,3)) && ($0in_delay(sii_l2t4_req[25] == 0,3)) && ($0in_delay(sii_l2t4_req[26] == 1,3)) && ($0in_rising_edge($0in_delay(l2t4_sii_iq_dequeue,3))) && !(sii_wri_ecc3_l4_cycle2 == sii_l2b4_ecc[3]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc3_l4_wri_cycle2
*/

wire sii_wri_ecc4_l4_cycle2 =  ( `TOP.cpu.sii_l2t4_req[11] ^ `TOP.cpu.sii_l2t4_req[12] ^ `TOP.cpu.sii_l2t4_req[13] ^ `TOP.cpu.sii_l2t4_req[14] ^ `TOP.cpu.sii_l2t4_req[15] ^ `TOP.cpu.sii_l2t4_req[16] ^ `TOP.cpu.sii_l2t4_req[17] ^ `TOP.cpu.sii_l2t4_req[18] ^ `TOP.cpu.sii_l2t4_req[19] ^ `TOP.cpu.sii_l2t4_req[20] ^ `TOP.cpu.sii_l2t4_req[21] ^ `TOP.cpu.sii_l2t4_req[22] ^ `TOP.cpu.sii_l2t4_req[23] ^ `TOP.cpu.sii_l2t4_req[24] ^ `TOP.cpu.sii_l2t4_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t4_req_vld,3))) && ($0in_delay(sii_l2t4_req[24] == 0,3)) && ($0in_delay(sii_l2t4_req[25] == 0,3)) && ($0in_delay(sii_l2t4_req[26] == 1,3)) && ($0in_rising_edge($0in_delay(l2t4_sii_iq_dequeue,3))) && !(sii_wri_ecc4_l4_cycle2 == sii_l2b4_ecc[4]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc4_l4_wri_cycle2
*/

wire sii_wri_ecc5_l4_cycle2 =  (`TOP.cpu.sii_l2t4_req[26] ^ `TOP.cpu.sii_l2t4_req[27] ^ `TOP.cpu.sii_l2t4_req[28] ^ `TOP.cpu.sii_l2t4_req[29] ^ `TOP.cpu.sii_l2t4_req[30] ^ `TOP.cpu.sii_l2t4_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t4_req_vld,3))) && ($0in_delay(sii_l2t4_req[24] == 0,3)) && ($0in_delay(sii_l2t4_req[25] == 0,3)) && ($0in_delay(sii_l2t4_req[26] == 1,3)) && ($0in_rising_edge($0in_delay(l2t4_sii_iq_dequeue,3))) && !(sii_wri_ecc5_l4_cycle2 == sii_l2b4_ecc[5]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc5_l4_wri_cycle2
*/

wire sii_wri_ecc6_l4_cycle2 =  (`TOP.cpu.sii_l2t4_req[0] ^ `TOP.cpu.sii_l2t4_req[1] ^ `TOP.cpu.sii_l2t4_req[2] ^ `TOP.cpu.sii_l2t4_req[4] ^ `TOP.cpu.sii_l2t4_req[5] ^ `TOP.cpu.sii_l2t4_req[7] ^ `TOP.cpu.sii_l2t4_req[10] ^ `TOP.cpu.sii_l2t4_req[11] ^ `TOP.cpu.sii_l2t4_req[12] ^ `TOP.cpu.sii_l2t4_req[14] ^ `TOP.cpu.sii_l2t4_req[17] ^ `TOP.cpu.sii_l2t4_req[18] ^ `TOP.cpu.sii_l2t4_req[21] ^ `TOP.cpu.sii_l2t4_req[23] ^ `TOP.cpu.sii_l2t4_req[24] ^ `TOP.cpu.sii_l2t4_req[26] ^ `TOP.cpu.sii_l2t4_req[27] ^ `TOP.cpu.sii_l2t4_req[29] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t4_req_vld,3))) && ($0in_delay(sii_l2t4_req[24] == 0,3)) && ($0in_delay(sii_l2t4_req[25] == 0,3)) && ($0in_delay(sii_l2t4_req[26] == 1,3)) && ($0in_rising_edge($0in_delay(l2t4_sii_iq_dequeue,3))) && !(sii_wri_ecc6_l4_cycle2 == sii_l2b4_ecc[6]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc6_l4_wri_cycle2
*/

wire sii_wri_ecc0_l4_cycle3 =  (`TOP.cpu.sii_l2t4_req[0] ^ `TOP.cpu.sii_l2t4_req[1] ^ `TOP.cpu.sii_l2t4_req[3] ^ `TOP.cpu.sii_l2t4_req[4] ^ `TOP.cpu.sii_l2t4_req[6] ^ `TOP.cpu.sii_l2t4_req[8] ^ `TOP.cpu.sii_l2t4_req[10] ^ `TOP.cpu.sii_l2t4_req[11] ^ `TOP.cpu.sii_l2t4_req[13] ^ `TOP.cpu.sii_l2t4_req[15] ^ `TOP.cpu.sii_l2t4_req[17] ^ `TOP.cpu.sii_l2t4_req[19] ^ `TOP.cpu.sii_l2t4_req[21] ^ `TOP.cpu.sii_l2t4_req[23] ^ `TOP.cpu.sii_l2t4_req[25] ^ `TOP.cpu.sii_l2t4_req[26] ^ `TOP.cpu.sii_l2t4_req[28] ^ `TOP.cpu.sii_l2t4_req[30] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t4_req_vld,4))) && ($0in_delay(sii_l2t4_req[24] == 0,4)) && ($0in_delay(sii_l2t4_req[25] == 0,4)) && ($0in_delay(sii_l2t4_req[26] == 1,4)) && ($0in_rising_edge($0in_delay(l2t4_sii_iq_dequeue,4))) && !(sii_wri_ecc0_l4_cycle3 == sii_l2b4_ecc[0]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc0_l4_wri_cycle3
*/

wire sii_wri_ecc1_l4_cycle3 =  (`TOP.cpu.sii_l2t4_req[0] ^ `TOP.cpu.sii_l2t4_req[2] ^ `TOP.cpu.sii_l2t4_req[3] ^ `TOP.cpu.sii_l2t4_req[5] ^ `TOP.cpu.sii_l2t4_req[6] ^ `TOP.cpu.sii_l2t4_req[9] ^ `TOP.cpu.sii_l2t4_req[10] ^ `TOP.cpu.sii_l2t4_req[12] ^ `TOP.cpu.sii_l2t4_req[13] ^ `TOP.cpu.sii_l2t4_req[16] ^ `TOP.cpu.sii_l2t4_req[17] ^ `TOP.cpu.sii_l2t4_req[20] ^ `TOP.cpu.sii_l2t4_req[21] ^ `TOP.cpu.sii_l2t4_req[24] ^ `TOP.cpu.sii_l2t4_req[25] ^ `TOP.cpu.sii_l2t4_req[27] ^ `TOP.cpu.sii_l2t4_req[28] ^ `TOP.cpu.sii_l2t4_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t4_req_vld,4))) && ($0in_delay(sii_l2t4_req[24] == 0,4)) && ($0in_delay(sii_l2t4_req[25] == 0,4)) && ($0in_delay(sii_l2t4_req[26] == 1,4)) && ($0in_rising_edge($0in_delay(l2t4_sii_iq_dequeue,4))) && !(sii_wri_ecc1_l4_cycle3 == sii_l2b4_ecc[1]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc1_l4_wri_cycle3
*/

wire sii_wri_ecc2_l4_cycle3 =  (`TOP.cpu.sii_l2t4_req[1] ^ `TOP.cpu.sii_l2t4_req[2] ^ `TOP.cpu.sii_l2t4_req[3] ^ `TOP.cpu.sii_l2t4_req[7] ^ `TOP.cpu.sii_l2t4_req[8] ^ `TOP.cpu.sii_l2t4_req[9] ^ `TOP.cpu.sii_l2t4_req[10] ^ `TOP.cpu.sii_l2t4_req[14] ^ `TOP.cpu.sii_l2t4_req[15] ^ `TOP.cpu.sii_l2t4_req[16] ^ `TOP.cpu.sii_l2t4_req[17] ^ `TOP.cpu.sii_l2t4_req[22] ^ `TOP.cpu.sii_l2t4_req[23] ^ `TOP.cpu.sii_l2t4_req[24] ^ `TOP.cpu.sii_l2t4_req[25] ^ `TOP.cpu.sii_l2t4_req[29] ^ `TOP.cpu.sii_l2t4_req[30] ^ `TOP.cpu.sii_l2t4_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t4_req_vld,4))) && ($0in_delay(sii_l2t4_req[24] == 0,4)) && ($0in_delay(sii_l2t4_req[25] == 0,4)) && ($0in_delay(sii_l2t4_req[26] == 1,4)) && ($0in_rising_edge($0in_delay(l2t4_sii_iq_dequeue,4))) && !(sii_wri_ecc2_l4_cycle3 == sii_l2b4_ecc[2]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc2_l4_wri_cycle3
*/

wire sii_wri_ecc3_l4_cycle3 =  (`TOP.cpu.sii_l2t4_req[4] ^ `TOP.cpu.sii_l2t4_req[5] ^ `TOP.cpu.sii_l2t4_req[6] ^ `TOP.cpu.sii_l2t4_req[7] ^ `TOP.cpu.sii_l2t4_req[8] ^ `TOP.cpu.sii_l2t4_req[9] ^ `TOP.cpu.sii_l2t4_req[10] ^ `TOP.cpu.sii_l2t4_req[18] ^ `TOP.cpu.sii_l2t4_req[19] ^ `TOP.cpu.sii_l2t4_req[20] ^ `TOP.cpu.sii_l2t4_req[21] ^ `TOP.cpu.sii_l2t4_req[22] ^ `TOP.cpu.sii_l2t4_req[23] ^ `TOP.cpu.sii_l2t4_req[24] ^ `TOP.cpu.sii_l2t4_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t4_req_vld,4))) && ($0in_delay(sii_l2t4_req[24] == 0,4)) && ($0in_delay(sii_l2t4_req[25] == 0,4)) && ($0in_delay(sii_l2t4_req[26] == 1,4)) && ($0in_rising_edge($0in_delay(l2t4_sii_iq_dequeue,4))) && !(sii_wri_ecc3_l4_cycle3 == sii_l2b4_ecc[3]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc3_l4_wri_cycle3
*/

wire sii_wri_ecc4_l4_cycle3 =  ( `TOP.cpu.sii_l2t4_req[11] ^ `TOP.cpu.sii_l2t4_req[12] ^ `TOP.cpu.sii_l2t4_req[13] ^ `TOP.cpu.sii_l2t4_req[14] ^ `TOP.cpu.sii_l2t4_req[15] ^ `TOP.cpu.sii_l2t4_req[16] ^ `TOP.cpu.sii_l2t4_req[17] ^ `TOP.cpu.sii_l2t4_req[18] ^ `TOP.cpu.sii_l2t4_req[19] ^ `TOP.cpu.sii_l2t4_req[20] ^ `TOP.cpu.sii_l2t4_req[21] ^ `TOP.cpu.sii_l2t4_req[22] ^ `TOP.cpu.sii_l2t4_req[23] ^ `TOP.cpu.sii_l2t4_req[24] ^ `TOP.cpu.sii_l2t4_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t4_req_vld,4))) && ($0in_delay(sii_l2t4_req[24] == 0,4)) && ($0in_delay(sii_l2t4_req[25] == 0,4)) && ($0in_delay(sii_l2t4_req[26] == 1,4)) && ($0in_rising_edge($0in_delay(l2t4_sii_iq_dequeue,4))) && !(sii_wri_ecc4_l4_cycle3 == sii_l2b4_ecc[4]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc4_l4_wri_cycle3
*/

wire sii_wri_ecc5_l4_cycle3 =  (`TOP.cpu.sii_l2t4_req[26] ^ `TOP.cpu.sii_l2t4_req[27] ^ `TOP.cpu.sii_l2t4_req[28] ^ `TOP.cpu.sii_l2t4_req[29] ^ `TOP.cpu.sii_l2t4_req[30] ^ `TOP.cpu.sii_l2t4_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t4_req_vld,4))) && ($0in_delay(sii_l2t4_req[24] == 0,4)) && ($0in_delay(sii_l2t4_req[25] == 0,4)) && ($0in_delay(sii_l2t4_req[26] == 1,4)) && ($0in_rising_edge($0in_delay(l2t4_sii_iq_dequeue,4))) && !(sii_wri_ecc5_l4_cycle3 == sii_l2b4_ecc[5]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc5_l4_wri_cycle3
*/

wire sii_wri_ecc6_l4_cycle3 =  (`TOP.cpu.sii_l2t4_req[0] ^ `TOP.cpu.sii_l2t4_req[1] ^ `TOP.cpu.sii_l2t4_req[2] ^ `TOP.cpu.sii_l2t4_req[4] ^ `TOP.cpu.sii_l2t4_req[5] ^ `TOP.cpu.sii_l2t4_req[7] ^ `TOP.cpu.sii_l2t4_req[10] ^ `TOP.cpu.sii_l2t4_req[11] ^ `TOP.cpu.sii_l2t4_req[12] ^ `TOP.cpu.sii_l2t4_req[14] ^ `TOP.cpu.sii_l2t4_req[17] ^ `TOP.cpu.sii_l2t4_req[18] ^ `TOP.cpu.sii_l2t4_req[21] ^ `TOP.cpu.sii_l2t4_req[23] ^ `TOP.cpu.sii_l2t4_req[24] ^ `TOP.cpu.sii_l2t4_req[26] ^ `TOP.cpu.sii_l2t4_req[27] ^ `TOP.cpu.sii_l2t4_req[29] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t4_req_vld,4))) && ($0in_delay(sii_l2t4_req[24] == 0,4)) && ($0in_delay(sii_l2t4_req[25] == 0,2)) && ($0in_delay(sii_l2t4_req[26] == 1,4)) && ($0in_rising_edge($0in_delay(l2t4_sii_iq_dequeue,4))) && !(sii_wri_ecc6_l4_cycle3 == sii_l2b4_ecc[6]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc6_l4_wri_cycle3
*/

wire sii_wri_ecc0_l4_cycle4 =  (`TOP.cpu.sii_l2t4_req[0] ^ `TOP.cpu.sii_l2t4_req[1] ^ `TOP.cpu.sii_l2t4_req[3] ^ `TOP.cpu.sii_l2t4_req[4] ^ `TOP.cpu.sii_l2t4_req[6] ^ `TOP.cpu.sii_l2t4_req[8] ^ `TOP.cpu.sii_l2t4_req[10] ^ `TOP.cpu.sii_l2t4_req[11] ^ `TOP.cpu.sii_l2t4_req[13] ^ `TOP.cpu.sii_l2t4_req[15] ^ `TOP.cpu.sii_l2t4_req[17] ^ `TOP.cpu.sii_l2t4_req[19] ^ `TOP.cpu.sii_l2t4_req[21] ^ `TOP.cpu.sii_l2t4_req[23] ^ `TOP.cpu.sii_l2t4_req[25] ^ `TOP.cpu.sii_l2t4_req[26] ^ `TOP.cpu.sii_l2t4_req[28] ^ `TOP.cpu.sii_l2t4_req[30] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t4_req_vld,5))) && ($0in_delay(sii_l2t4_req[24] == 0,5)) && ($0in_delay(sii_l2t4_req[25] == 0,5)) && ($0in_delay(sii_l2t4_req[26] == 1,5)) && ($0in_rising_edge($0in_delay(l2t4_sii_iq_dequeue,5))) && !(sii_wri_ecc0_l4_cycle4 == sii_l2b4_ecc[0]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc0_l4_wri_cycle4
*/

wire sii_wri_ecc1_l4_cycle4 =  (`TOP.cpu.sii_l2t4_req[0] ^ `TOP.cpu.sii_l2t4_req[2] ^ `TOP.cpu.sii_l2t4_req[3] ^ `TOP.cpu.sii_l2t4_req[5] ^ `TOP.cpu.sii_l2t4_req[6] ^ `TOP.cpu.sii_l2t4_req[9] ^ `TOP.cpu.sii_l2t4_req[10] ^ `TOP.cpu.sii_l2t4_req[12] ^ `TOP.cpu.sii_l2t4_req[13] ^ `TOP.cpu.sii_l2t4_req[16] ^ `TOP.cpu.sii_l2t4_req[17] ^ `TOP.cpu.sii_l2t4_req[20] ^ `TOP.cpu.sii_l2t4_req[21] ^ `TOP.cpu.sii_l2t4_req[24] ^ `TOP.cpu.sii_l2t4_req[25] ^ `TOP.cpu.sii_l2t4_req[27] ^ `TOP.cpu.sii_l2t4_req[28] ^ `TOP.cpu.sii_l2t4_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t4_req_vld,5))) && ($0in_delay(sii_l2t4_req[24] == 0,5)) && ($0in_delay(sii_l2t4_req[25] == 0,5)) && ($0in_delay(sii_l2t4_req[26] == 1,5)) && ($0in_rising_edge($0in_delay(l2t4_sii_iq_dequeue,5))) && !(sii_wri_ecc1_l4_cycle4 == sii_l2b4_ecc[1]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc1_l4_wri_cycle4
*/

wire sii_wri_ecc2_l4_cycle4 =  (`TOP.cpu.sii_l2t4_req[1] ^ `TOP.cpu.sii_l2t4_req[2] ^ `TOP.cpu.sii_l2t4_req[3] ^ `TOP.cpu.sii_l2t4_req[7] ^ `TOP.cpu.sii_l2t4_req[8] ^ `TOP.cpu.sii_l2t4_req[9] ^ `TOP.cpu.sii_l2t4_req[10] ^ `TOP.cpu.sii_l2t4_req[14] ^ `TOP.cpu.sii_l2t4_req[15] ^ `TOP.cpu.sii_l2t4_req[16] ^ `TOP.cpu.sii_l2t4_req[17] ^ `TOP.cpu.sii_l2t4_req[22] ^ `TOP.cpu.sii_l2t4_req[23] ^ `TOP.cpu.sii_l2t4_req[24] ^ `TOP.cpu.sii_l2t4_req[25] ^ `TOP.cpu.sii_l2t4_req[29] ^ `TOP.cpu.sii_l2t4_req[30] ^ `TOP.cpu.sii_l2t4_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t4_req_vld,5))) && ($0in_delay(sii_l2t4_req[24] == 0,5)) && ($0in_delay(sii_l2t4_req[25] == 0,5)) && ($0in_delay(sii_l2t4_req[26] == 1,5)) && ($0in_rising_edge($0in_delay(l2t4_sii_iq_dequeue,5))) && !(sii_wri_ecc2_l4_cycle4 == sii_l2b4_ecc[2]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc2_l4_wri_cycle4
*/

wire sii_wri_ecc3_l4_cycle4 =  (`TOP.cpu.sii_l2t4_req[4] ^ `TOP.cpu.sii_l2t4_req[5] ^ `TOP.cpu.sii_l2t4_req[6] ^ `TOP.cpu.sii_l2t4_req[7] ^ `TOP.cpu.sii_l2t4_req[8] ^ `TOP.cpu.sii_l2t4_req[9] ^ `TOP.cpu.sii_l2t4_req[10] ^ `TOP.cpu.sii_l2t4_req[18] ^ `TOP.cpu.sii_l2t4_req[19] ^ `TOP.cpu.sii_l2t4_req[20] ^ `TOP.cpu.sii_l2t4_req[21] ^ `TOP.cpu.sii_l2t4_req[22] ^ `TOP.cpu.sii_l2t4_req[23] ^ `TOP.cpu.sii_l2t4_req[24] ^ `TOP.cpu.sii_l2t4_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t4_req_vld,5))) && ($0in_delay(sii_l2t4_req[24] == 0,5)) && ($0in_delay(sii_l2t4_req[25] == 0,5)) && ($0in_delay(sii_l2t4_req[26] == 1,5)) && ($0in_rising_edge($0in_delay(l2t4_sii_iq_dequeue,5))) && !(sii_wri_ecc3_l4_cycle4 == sii_l2b4_ecc[3]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc3_l4_wri_cycle4
*/

wire sii_wri_ecc4_l4_cycle4 =  ( `TOP.cpu.sii_l2t4_req[11] ^ `TOP.cpu.sii_l2t4_req[12] ^ `TOP.cpu.sii_l2t4_req[13] ^ `TOP.cpu.sii_l2t4_req[14] ^ `TOP.cpu.sii_l2t4_req[15] ^ `TOP.cpu.sii_l2t4_req[16] ^ `TOP.cpu.sii_l2t4_req[17] ^ `TOP.cpu.sii_l2t4_req[18] ^ `TOP.cpu.sii_l2t4_req[19] ^ `TOP.cpu.sii_l2t4_req[20] ^ `TOP.cpu.sii_l2t4_req[21] ^ `TOP.cpu.sii_l2t4_req[22] ^ `TOP.cpu.sii_l2t4_req[23] ^ `TOP.cpu.sii_l2t4_req[24] ^ `TOP.cpu.sii_l2t4_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t4_req_vld,5))) && ($0in_delay(sii_l2t4_req[24] == 0,5)) && ($0in_delay(sii_l2t4_req[25] == 0,5)) && ($0in_delay(sii_l2t4_req[26] == 1,5)) && ($0in_rising_edge($0in_delay(l2t4_sii_iq_dequeue,5))) && !(sii_wri_ecc4_l4_cycle4 == sii_l2b4_ecc[4]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc4_l4_wri_cycle4
*/

wire sii_wri_ecc5_l4_cycle4 =  (`TOP.cpu.sii_l2t4_req[26] ^ `TOP.cpu.sii_l2t4_req[27] ^ `TOP.cpu.sii_l2t4_req[28] ^ `TOP.cpu.sii_l2t4_req[29] ^ `TOP.cpu.sii_l2t4_req[30] ^ `TOP.cpu.sii_l2t4_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t4_req_vld,5))) && ($0in_delay(sii_l2t4_req[24] == 0,5)) && ($0in_delay(sii_l2t4_req[25] == 0,5)) && ($0in_delay(sii_l2t4_req[26] == 1,5)) && ($0in_rising_edge($0in_delay(l2t4_sii_iq_dequeue,5))) && !(sii_wri_ecc5_l4_cycle4 == sii_l2b4_ecc[5]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc5_l4_wri_cycle4
*/

wire sii_wri_ecc6_l4_cycle4 =  (`TOP.cpu.sii_l2t4_req[0] ^ `TOP.cpu.sii_l2t4_req[1] ^ `TOP.cpu.sii_l2t4_req[2] ^ `TOP.cpu.sii_l2t4_req[4] ^ `TOP.cpu.sii_l2t4_req[5] ^ `TOP.cpu.sii_l2t4_req[7] ^ `TOP.cpu.sii_l2t4_req[10] ^ `TOP.cpu.sii_l2t4_req[11] ^ `TOP.cpu.sii_l2t4_req[12] ^ `TOP.cpu.sii_l2t4_req[14] ^ `TOP.cpu.sii_l2t4_req[17] ^ `TOP.cpu.sii_l2t4_req[18] ^ `TOP.cpu.sii_l2t4_req[21] ^ `TOP.cpu.sii_l2t4_req[23] ^ `TOP.cpu.sii_l2t4_req[24] ^ `TOP.cpu.sii_l2t4_req[26] ^ `TOP.cpu.sii_l2t4_req[27] ^ `TOP.cpu.sii_l2t4_req[29] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t4_req_vld,5))) && ($0in_delay(sii_l2t4_req[24] == 0,5)) && ($0in_delay(sii_l2t4_req[25] == 0,5)) && ($0in_delay(sii_l2t4_req[26] == 1,5)) && ($0in_rising_edge($0in_delay(l2t4_sii_iq_dequeue,5))) && !(sii_wri_ecc6_l4_cycle4 == sii_l2b4_ecc[6]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc6_l4_wri_cycle4
*/

wire sii_wri_ecc0_l4_cycle5 =  (`TOP.cpu.sii_l2t4_req[0] ^ `TOP.cpu.sii_l2t4_req[1] ^ `TOP.cpu.sii_l2t4_req[3] ^ `TOP.cpu.sii_l2t4_req[4] ^ `TOP.cpu.sii_l2t4_req[6] ^ `TOP.cpu.sii_l2t4_req[8] ^ `TOP.cpu.sii_l2t4_req[10] ^ `TOP.cpu.sii_l2t4_req[11] ^ `TOP.cpu.sii_l2t4_req[13] ^ `TOP.cpu.sii_l2t4_req[15] ^ `TOP.cpu.sii_l2t4_req[17] ^ `TOP.cpu.sii_l2t4_req[19] ^ `TOP.cpu.sii_l2t4_req[21] ^ `TOP.cpu.sii_l2t4_req[23] ^ `TOP.cpu.sii_l2t4_req[25] ^ `TOP.cpu.sii_l2t4_req[26] ^ `TOP.cpu.sii_l2t4_req[28] ^ `TOP.cpu.sii_l2t4_req[30] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t4_req_vld,6))) && ($0in_delay(sii_l2t4_req[24] == 0,6)) && ($0in_delay(sii_l2t4_req[25] == 0,6)) && ($0in_delay(sii_l2t4_req[26] == 1,6)) && ($0in_rising_edge($0in_delay(l2t4_sii_iq_dequeue,6))) && !(sii_wri_ecc0_l4_cycle5 == sii_l2b4_ecc[0]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc0_l4_wri_cycle5
*/

wire sii_wri_ecc1_l4_cycle5 =  (`TOP.cpu.sii_l2t4_req[0] ^ `TOP.cpu.sii_l2t4_req[2] ^ `TOP.cpu.sii_l2t4_req[3] ^ `TOP.cpu.sii_l2t4_req[5] ^ `TOP.cpu.sii_l2t4_req[6] ^ `TOP.cpu.sii_l2t4_req[9] ^ `TOP.cpu.sii_l2t4_req[10] ^ `TOP.cpu.sii_l2t4_req[12] ^ `TOP.cpu.sii_l2t4_req[13] ^ `TOP.cpu.sii_l2t4_req[16] ^ `TOP.cpu.sii_l2t4_req[17] ^ `TOP.cpu.sii_l2t4_req[20] ^ `TOP.cpu.sii_l2t4_req[21] ^ `TOP.cpu.sii_l2t4_req[24] ^ `TOP.cpu.sii_l2t4_req[25] ^ `TOP.cpu.sii_l2t4_req[27] ^ `TOP.cpu.sii_l2t4_req[28] ^ `TOP.cpu.sii_l2t4_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t4_req_vld,6))) && ($0in_delay(sii_l2t4_req[24] == 0,6)) && ($0in_delay(sii_l2t4_req[25] == 0,6)) && ($0in_delay(sii_l2t4_req[26] == 1,6)) && ($0in_rising_edge($0in_delay(l2t4_sii_iq_dequeue,6))) && !(sii_wri_ecc1_l4_cycle5 == sii_l2b4_ecc[1]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc1_l4_wri_cycle5
*/

wire sii_wri_ecc2_l4_cycle5 =  (`TOP.cpu.sii_l2t4_req[1] ^ `TOP.cpu.sii_l2t4_req[2] ^ `TOP.cpu.sii_l2t4_req[3] ^ `TOP.cpu.sii_l2t4_req[7] ^ `TOP.cpu.sii_l2t4_req[8] ^ `TOP.cpu.sii_l2t4_req[9] ^ `TOP.cpu.sii_l2t4_req[10] ^ `TOP.cpu.sii_l2t4_req[14] ^ `TOP.cpu.sii_l2t4_req[15] ^ `TOP.cpu.sii_l2t4_req[16] ^ `TOP.cpu.sii_l2t4_req[17] ^ `TOP.cpu.sii_l2t4_req[22] ^ `TOP.cpu.sii_l2t4_req[23] ^ `TOP.cpu.sii_l2t4_req[24] ^ `TOP.cpu.sii_l2t4_req[25] ^ `TOP.cpu.sii_l2t4_req[29] ^ `TOP.cpu.sii_l2t4_req[30] ^ `TOP.cpu.sii_l2t4_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t4_req_vld,6))) && ($0in_delay(sii_l2t4_req[24] == 0,6)) && ($0in_delay(sii_l2t4_req[25] == 0,6)) && ($0in_delay(sii_l2t4_req[26] == 1,6)) && ($0in_rising_edge($0in_delay(l2t4_sii_iq_dequeue,6))) && !(sii_wri_ecc2_l4_cycle5 == sii_l2b4_ecc[2]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc2_l4_wri_cycle5
*/

wire sii_wri_ecc3_l4_cycle5 =  (`TOP.cpu.sii_l2t4_req[4] ^ `TOP.cpu.sii_l2t4_req[5] ^ `TOP.cpu.sii_l2t4_req[6] ^ `TOP.cpu.sii_l2t4_req[7] ^ `TOP.cpu.sii_l2t4_req[8] ^ `TOP.cpu.sii_l2t4_req[9] ^ `TOP.cpu.sii_l2t4_req[10] ^ `TOP.cpu.sii_l2t4_req[18] ^ `TOP.cpu.sii_l2t4_req[19] ^ `TOP.cpu.sii_l2t4_req[20] ^ `TOP.cpu.sii_l2t4_req[21] ^ `TOP.cpu.sii_l2t4_req[22] ^ `TOP.cpu.sii_l2t4_req[23] ^ `TOP.cpu.sii_l2t4_req[24] ^ `TOP.cpu.sii_l2t4_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t4_req_vld,6))) && ($0in_delay(sii_l2t4_req[24] == 0,6)) && ($0in_delay(sii_l2t4_req[25] == 0,6)) && ($0in_delay(sii_l2t4_req[26] == 1,6)) && ($0in_rising_edge($0in_delay(l2t4_sii_iq_dequeue,6))) && !(sii_wri_ecc3_l4_cycle5 == sii_l2b4_ecc[3]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc3_l4_wri_cycle5
*/

wire sii_wri_ecc4_l4_cycle5 =  ( `TOP.cpu.sii_l2t4_req[11] ^ `TOP.cpu.sii_l2t4_req[12] ^ `TOP.cpu.sii_l2t4_req[13] ^ `TOP.cpu.sii_l2t4_req[14] ^ `TOP.cpu.sii_l2t4_req[15] ^ `TOP.cpu.sii_l2t4_req[16] ^ `TOP.cpu.sii_l2t4_req[17] ^ `TOP.cpu.sii_l2t4_req[18] ^ `TOP.cpu.sii_l2t4_req[19] ^ `TOP.cpu.sii_l2t4_req[20] ^ `TOP.cpu.sii_l2t4_req[21] ^ `TOP.cpu.sii_l2t4_req[22] ^ `TOP.cpu.sii_l2t4_req[23] ^ `TOP.cpu.sii_l2t4_req[24] ^ `TOP.cpu.sii_l2t4_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t4_req_vld,6))) && ($0in_delay(sii_l2t4_req[24] == 0,6)) && ($0in_delay(sii_l2t4_req[25] == 0,6)) && ($0in_delay(sii_l2t4_req[26] == 1,6)) && ($0in_rising_edge($0in_delay(l2t4_sii_iq_dequeue,6))) && !(sii_wri_ecc4_l4_cycle5 == sii_l2b4_ecc[4]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc4_l4_wri_cycle5
*/

wire sii_wri_ecc5_l4_cycle5 =  (`TOP.cpu.sii_l2t4_req[26] ^ `TOP.cpu.sii_l2t4_req[27] ^ `TOP.cpu.sii_l2t4_req[28] ^ `TOP.cpu.sii_l2t4_req[29] ^ `TOP.cpu.sii_l2t4_req[30] ^ `TOP.cpu.sii_l2t4_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t4_req_vld,6))) && ($0in_delay(sii_l2t4_req[24] == 0,6)) && ($0in_delay(sii_l2t4_req[25] == 0,2)) && ($0in_delay(sii_l2t4_req[26] == 1,6)) && ($0in_rising_edge($0in_delay(l2t4_sii_iq_dequeue,6))) && !(sii_wri_ecc5_l4_cycle5 == sii_l2b4_ecc[5]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc5_l4_wri_cycle5
*/

wire sii_wri_ecc6_l4_cycle5 =  (`TOP.cpu.sii_l2t4_req[0] ^ `TOP.cpu.sii_l2t4_req[1] ^ `TOP.cpu.sii_l2t4_req[2] ^ `TOP.cpu.sii_l2t4_req[4] ^ `TOP.cpu.sii_l2t4_req[5] ^ `TOP.cpu.sii_l2t4_req[7] ^ `TOP.cpu.sii_l2t4_req[10] ^ `TOP.cpu.sii_l2t4_req[11] ^ `TOP.cpu.sii_l2t4_req[12] ^ `TOP.cpu.sii_l2t4_req[14] ^ `TOP.cpu.sii_l2t4_req[17] ^ `TOP.cpu.sii_l2t4_req[18] ^ `TOP.cpu.sii_l2t4_req[21] ^ `TOP.cpu.sii_l2t4_req[23] ^ `TOP.cpu.sii_l2t4_req[24] ^ `TOP.cpu.sii_l2t4_req[26] ^ `TOP.cpu.sii_l2t4_req[27] ^ `TOP.cpu.sii_l2t4_req[29] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t4_req_vld,6))) && ($0in_delay(sii_l2t4_req[24] == 0,6)) && ($0in_delay(sii_l2t4_req[25] == 0,6)) && ($0in_delay(sii_l2t4_req[26] == 1,6)) && ($0in_rising_edge($0in_delay(l2t4_sii_iq_dequeue,6))) && !(sii_wri_ecc6_l4_cycle5 == sii_l2b4_ecc[6]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc6_l4_wri_cycle5
*/

wire sii_wri_ecc0_l4_cycle6 =  (`TOP.cpu.sii_l2t4_req[0] ^ `TOP.cpu.sii_l2t4_req[1] ^ `TOP.cpu.sii_l2t4_req[3] ^ `TOP.cpu.sii_l2t4_req[4] ^ `TOP.cpu.sii_l2t4_req[6] ^ `TOP.cpu.sii_l2t4_req[8] ^ `TOP.cpu.sii_l2t4_req[10] ^ `TOP.cpu.sii_l2t4_req[11] ^ `TOP.cpu.sii_l2t4_req[13] ^ `TOP.cpu.sii_l2t4_req[15] ^ `TOP.cpu.sii_l2t4_req[17] ^ `TOP.cpu.sii_l2t4_req[19] ^ `TOP.cpu.sii_l2t4_req[21] ^ `TOP.cpu.sii_l2t4_req[23] ^ `TOP.cpu.sii_l2t4_req[25] ^ `TOP.cpu.sii_l2t4_req[26] ^ `TOP.cpu.sii_l2t4_req[28] ^ `TOP.cpu.sii_l2t4_req[30] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t4_req_vld,7))) && ($0in_delay(sii_l2t4_req[24] == 0,7)) && ($0in_delay(sii_l2t4_req[25] == 0,7)) && ($0in_delay(sii_l2t4_req[26] == 1,7)) && ($0in_rising_edge($0in_delay(l2t4_sii_iq_dequeue,7))) && !(sii_wri_ecc0_l4_cycle6 == sii_l2b4_ecc[0]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc0_l4_wri_cycle6
*/

wire sii_wri_ecc1_l4_cycle6 =  (`TOP.cpu.sii_l2t4_req[0] ^ `TOP.cpu.sii_l2t4_req[2] ^ `TOP.cpu.sii_l2t4_req[3] ^ `TOP.cpu.sii_l2t4_req[5] ^ `TOP.cpu.sii_l2t4_req[6] ^ `TOP.cpu.sii_l2t4_req[9] ^ `TOP.cpu.sii_l2t4_req[10] ^ `TOP.cpu.sii_l2t4_req[12] ^ `TOP.cpu.sii_l2t4_req[13] ^ `TOP.cpu.sii_l2t4_req[16] ^ `TOP.cpu.sii_l2t4_req[17] ^ `TOP.cpu.sii_l2t4_req[20] ^ `TOP.cpu.sii_l2t4_req[21] ^ `TOP.cpu.sii_l2t4_req[24] ^ `TOP.cpu.sii_l2t4_req[25] ^ `TOP.cpu.sii_l2t4_req[27] ^ `TOP.cpu.sii_l2t4_req[28] ^ `TOP.cpu.sii_l2t4_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t4_req_vld,7))) && ($0in_delay(sii_l2t4_req[24] == 0,7)) && ($0in_delay(sii_l2t4_req[25] == 0,7)) && ($0in_delay(sii_l2t4_req[26] == 1,7)) && ($0in_rising_edge($0in_delay(l2t4_sii_iq_dequeue,7))) && !(sii_wri_ecc1_l4_cycle6 == sii_l2b4_ecc[1]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc1_l4_wri_cycle6
*/

wire sii_wri_ecc2_l4_cycle6 =  (`TOP.cpu.sii_l2t4_req[1] ^ `TOP.cpu.sii_l2t4_req[2] ^ `TOP.cpu.sii_l2t4_req[3] ^ `TOP.cpu.sii_l2t4_req[7] ^ `TOP.cpu.sii_l2t4_req[8] ^ `TOP.cpu.sii_l2t4_req[9] ^ `TOP.cpu.sii_l2t4_req[10] ^ `TOP.cpu.sii_l2t4_req[14] ^ `TOP.cpu.sii_l2t4_req[15] ^ `TOP.cpu.sii_l2t4_req[16] ^ `TOP.cpu.sii_l2t4_req[17] ^ `TOP.cpu.sii_l2t4_req[22] ^ `TOP.cpu.sii_l2t4_req[23] ^ `TOP.cpu.sii_l2t4_req[24] ^ `TOP.cpu.sii_l2t4_req[25] ^ `TOP.cpu.sii_l2t4_req[29] ^ `TOP.cpu.sii_l2t4_req[30] ^ `TOP.cpu.sii_l2t4_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t4_req_vld,7))) && ($0in_delay(sii_l2t4_req[24] == 0,7)) && ($0in_delay(sii_l2t4_req[25] == 0,7)) && ($0in_delay(sii_l2t4_req[26] == 1,7)) && ($0in_rising_edge($0in_delay(l2t4_sii_iq_dequeue,7))) && !(sii_wri_ecc2_l4_cycle6 == sii_l2b4_ecc[2]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc2_l4_wri_cycle6
*/

wire sii_wri_ecc3_l4_cycle6 =  (`TOP.cpu.sii_l2t4_req[4] ^ `TOP.cpu.sii_l2t4_req[5] ^ `TOP.cpu.sii_l2t4_req[6] ^ `TOP.cpu.sii_l2t4_req[7] ^ `TOP.cpu.sii_l2t4_req[8] ^ `TOP.cpu.sii_l2t4_req[9] ^ `TOP.cpu.sii_l2t4_req[10] ^ `TOP.cpu.sii_l2t4_req[18] ^ `TOP.cpu.sii_l2t4_req[19] ^ `TOP.cpu.sii_l2t4_req[20] ^ `TOP.cpu.sii_l2t4_req[21] ^ `TOP.cpu.sii_l2t4_req[22] ^ `TOP.cpu.sii_l2t4_req[23] ^ `TOP.cpu.sii_l2t4_req[24] ^ `TOP.cpu.sii_l2t4_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t4_req_vld,7))) && ($0in_delay(sii_l2t4_req[24] == 0,7)) && ($0in_delay(sii_l2t4_req[25] == 0,7)) && ($0in_delay(sii_l2t4_req[26] == 1,7)) && ($0in_rising_edge($0in_delay(l2t4_sii_iq_dequeue,7))) && !(sii_wri_ecc3_l4_cycle6 == sii_l2b4_ecc[3]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc3_l4_wri_cycle6
*/

wire sii_wri_ecc4_l4_cycle6 =  ( `TOP.cpu.sii_l2t4_req[11] ^ `TOP.cpu.sii_l2t4_req[12] ^ `TOP.cpu.sii_l2t4_req[13] ^ `TOP.cpu.sii_l2t4_req[14] ^ `TOP.cpu.sii_l2t4_req[15] ^ `TOP.cpu.sii_l2t4_req[16] ^ `TOP.cpu.sii_l2t4_req[17] ^ `TOP.cpu.sii_l2t4_req[18] ^ `TOP.cpu.sii_l2t4_req[19] ^ `TOP.cpu.sii_l2t4_req[20] ^ `TOP.cpu.sii_l2t4_req[21] ^ `TOP.cpu.sii_l2t4_req[22] ^ `TOP.cpu.sii_l2t4_req[23] ^ `TOP.cpu.sii_l2t4_req[24] ^ `TOP.cpu.sii_l2t4_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t4_req_vld,7))) && ($0in_delay(sii_l2t4_req[24] == 0,7)) && ($0in_delay(sii_l2t4_req[25] == 0,7)) && ($0in_delay(sii_l2t4_req[26] == 1,7)) && ($0in_rising_edge($0in_delay(l2t4_sii_iq_dequeue,7))) && !(sii_wri_ecc4_l4_cycle6 == sii_l2b4_ecc[4]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc4_l4_wri_cycle6
*/

wire sii_wri_ecc5_l4_cycle6 =  (`TOP.cpu.sii_l2t4_req[26] ^ `TOP.cpu.sii_l2t4_req[27] ^ `TOP.cpu.sii_l2t4_req[28] ^ `TOP.cpu.sii_l2t4_req[29] ^ `TOP.cpu.sii_l2t4_req[30] ^ `TOP.cpu.sii_l2t4_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t4_req_vld,7))) && ($0in_delay(sii_l2t4_req[24] == 0,7)) && ($0in_delay(sii_l2t4_req[25] == 0,7)) && ($0in_delay(sii_l2t4_req[26] == 1,7)) && ($0in_rising_edge($0in_delay(l2t4_sii_iq_dequeue,7))) && !(sii_wri_ecc5_l4_cycle6 == sii_l2b4_ecc[5]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc5_l4_wri_cycle6
*/

wire sii_wri_ecc6_l4_cycle6 =  (`TOP.cpu.sii_l2t4_req[0] ^ `TOP.cpu.sii_l2t4_req[1] ^ `TOP.cpu.sii_l2t4_req[2] ^ `TOP.cpu.sii_l2t4_req[4] ^ `TOP.cpu.sii_l2t4_req[5] ^ `TOP.cpu.sii_l2t4_req[7] ^ `TOP.cpu.sii_l2t4_req[10] ^ `TOP.cpu.sii_l2t4_req[11] ^ `TOP.cpu.sii_l2t4_req[12] ^ `TOP.cpu.sii_l2t4_req[14] ^ `TOP.cpu.sii_l2t4_req[17] ^ `TOP.cpu.sii_l2t4_req[18] ^ `TOP.cpu.sii_l2t4_req[21] ^ `TOP.cpu.sii_l2t4_req[23] ^ `TOP.cpu.sii_l2t4_req[24] ^ `TOP.cpu.sii_l2t4_req[26] ^ `TOP.cpu.sii_l2t4_req[27] ^ `TOP.cpu.sii_l2t4_req[29] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t4_req_vld,7))) && ($0in_delay(sii_l2t4_req[24] == 0,7)) && ($0in_delay(sii_l2t4_req[25] == 0,7)) && ($0in_delay(sii_l2t4_req[26] == 1,7)) && ($0in_rising_edge($0in_delay(l2t4_sii_iq_dequeue,7))) && !(sii_wri_ecc6_l4_cycle6 == sii_l2b4_ecc[6]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc6_l4_wri_cycle6
*/

wire sii_wri_ecc0_l4_cycle7 =  (`TOP.cpu.sii_l2t4_req[0] ^ `TOP.cpu.sii_l2t4_req[1] ^ `TOP.cpu.sii_l2t4_req[3] ^ `TOP.cpu.sii_l2t4_req[4] ^ `TOP.cpu.sii_l2t4_req[6] ^ `TOP.cpu.sii_l2t4_req[8] ^ `TOP.cpu.sii_l2t4_req[10] ^ `TOP.cpu.sii_l2t4_req[11] ^ `TOP.cpu.sii_l2t4_req[13] ^ `TOP.cpu.sii_l2t4_req[15] ^ `TOP.cpu.sii_l2t4_req[17] ^ `TOP.cpu.sii_l2t4_req[19] ^ `TOP.cpu.sii_l2t4_req[21] ^ `TOP.cpu.sii_l2t4_req[23] ^ `TOP.cpu.sii_l2t4_req[25] ^ `TOP.cpu.sii_l2t4_req[26] ^ `TOP.cpu.sii_l2t4_req[28] ^ `TOP.cpu.sii_l2t4_req[30] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t4_req_vld,8))) && ($0in_delay(sii_l2t4_req[24] == 0,8)) && ($0in_delay(sii_l2t4_req[25] == 0,8)) && ($0in_delay(sii_l2t4_req[26] == 1,8)) && ($0in_rising_edge($0in_delay(l2t4_sii_iq_dequeue,8))) && !(sii_wri_ecc0_l4_cycle7 == sii_l2b4_ecc[0]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc0_l4_wri_cycle7
*/

wire sii_wri_ecc1_l4_cycle7 =  (`TOP.cpu.sii_l2t4_req[0] ^ `TOP.cpu.sii_l2t4_req[2] ^ `TOP.cpu.sii_l2t4_req[3] ^ `TOP.cpu.sii_l2t4_req[5] ^ `TOP.cpu.sii_l2t4_req[6] ^ `TOP.cpu.sii_l2t4_req[9] ^ `TOP.cpu.sii_l2t4_req[10] ^ `TOP.cpu.sii_l2t4_req[12] ^ `TOP.cpu.sii_l2t4_req[13] ^ `TOP.cpu.sii_l2t4_req[16] ^ `TOP.cpu.sii_l2t4_req[17] ^ `TOP.cpu.sii_l2t4_req[20] ^ `TOP.cpu.sii_l2t4_req[21] ^ `TOP.cpu.sii_l2t4_req[24] ^ `TOP.cpu.sii_l2t4_req[25] ^ `TOP.cpu.sii_l2t4_req[27] ^ `TOP.cpu.sii_l2t4_req[28] ^ `TOP.cpu.sii_l2t4_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t4_req_vld,8))) && ($0in_delay(sii_l2t4_req[24] == 0,8)) && ($0in_delay(sii_l2t4_req[25] == 0,8)) && ($0in_delay(sii_l2t4_req[26] == 1,8)) && ($0in_rising_edge($0in_delay(l2t4_sii_iq_dequeue,8))) && !(sii_wri_ecc1_l4_cycle7 == sii_l2b4_ecc[1]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc1_l4_wri_cycle7
*/

wire sii_wri_ecc2_l4_cycle7 =  (`TOP.cpu.sii_l2t4_req[1] ^ `TOP.cpu.sii_l2t4_req[2] ^ `TOP.cpu.sii_l2t4_req[3] ^ `TOP.cpu.sii_l2t4_req[7] ^ `TOP.cpu.sii_l2t4_req[8] ^ `TOP.cpu.sii_l2t4_req[9] ^ `TOP.cpu.sii_l2t4_req[10] ^ `TOP.cpu.sii_l2t4_req[14] ^ `TOP.cpu.sii_l2t4_req[15] ^ `TOP.cpu.sii_l2t4_req[16] ^ `TOP.cpu.sii_l2t4_req[17] ^ `TOP.cpu.sii_l2t4_req[22] ^ `TOP.cpu.sii_l2t4_req[23] ^ `TOP.cpu.sii_l2t4_req[24] ^ `TOP.cpu.sii_l2t4_req[25] ^ `TOP.cpu.sii_l2t4_req[29] ^ `TOP.cpu.sii_l2t4_req[30] ^ `TOP.cpu.sii_l2t4_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t4_req_vld,8))) && ($0in_delay(sii_l2t4_req[24] == 0,8)) && ($0in_delay(sii_l2t4_req[25] == 0,8)) && ($0in_delay(sii_l2t4_req[26] == 1,8)) && ($0in_rising_edge($0in_delay(l2t4_sii_iq_dequeue,8))) && !(sii_wri_ecc2_l4_cycle7 == sii_l2b4_ecc[2]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc2_l4_wri_cycle7
*/

wire sii_wri_ecc3_l4_cycle7 =  (`TOP.cpu.sii_l2t4_req[4] ^ `TOP.cpu.sii_l2t4_req[5] ^ `TOP.cpu.sii_l2t4_req[6] ^ `TOP.cpu.sii_l2t4_req[7] ^ `TOP.cpu.sii_l2t4_req[8] ^ `TOP.cpu.sii_l2t4_req[9] ^ `TOP.cpu.sii_l2t4_req[10] ^ `TOP.cpu.sii_l2t4_req[18] ^ `TOP.cpu.sii_l2t4_req[19] ^ `TOP.cpu.sii_l2t4_req[20] ^ `TOP.cpu.sii_l2t4_req[21] ^ `TOP.cpu.sii_l2t4_req[22] ^ `TOP.cpu.sii_l2t4_req[23] ^ `TOP.cpu.sii_l2t4_req[24] ^ `TOP.cpu.sii_l2t4_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t4_req_vld,8))) && ($0in_delay(sii_l2t4_req[24] == 0,8)) && ($0in_delay(sii_l2t4_req[25] == 0,8)) && ($0in_delay(sii_l2t4_req[26] == 1,8)) && ($0in_rising_edge($0in_delay(l2t4_sii_iq_dequeue,8))) && !(sii_wri_ecc3_l4_cycle7 == sii_l2b4_ecc[3]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc3_l4_wri_cycle7
*/

wire sii_wri_ecc4_l4_cycle7 =  ( `TOP.cpu.sii_l2t4_req[11] ^ `TOP.cpu.sii_l2t4_req[12] ^ `TOP.cpu.sii_l2t4_req[13] ^ `TOP.cpu.sii_l2t4_req[14] ^ `TOP.cpu.sii_l2t4_req[15] ^ `TOP.cpu.sii_l2t4_req[16] ^ `TOP.cpu.sii_l2t4_req[17] ^ `TOP.cpu.sii_l2t4_req[18] ^ `TOP.cpu.sii_l2t4_req[19] ^ `TOP.cpu.sii_l2t4_req[20] ^ `TOP.cpu.sii_l2t4_req[21] ^ `TOP.cpu.sii_l2t4_req[22] ^ `TOP.cpu.sii_l2t4_req[23] ^ `TOP.cpu.sii_l2t4_req[24] ^ `TOP.cpu.sii_l2t4_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t4_req_vld,8))) && ($0in_delay(sii_l2t4_req[24] == 0,8)) && ($0in_delay(sii_l2t4_req[25] == 0,8)) && ($0in_delay(sii_l2t4_req[26] == 1,8)) && ($0in_rising_edge($0in_delay(l2t4_sii_iq_dequeue,8))) && !(sii_wri_ecc4_l4_cycle7 == sii_l2b4_ecc[4]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc4_l4_wri_cycle7
*/

wire sii_wri_ecc5_l4_cycle7 =  (`TOP.cpu.sii_l2t4_req[26] ^ `TOP.cpu.sii_l2t4_req[27] ^ `TOP.cpu.sii_l2t4_req[28] ^ `TOP.cpu.sii_l2t4_req[29] ^ `TOP.cpu.sii_l2t4_req[30] ^ `TOP.cpu.sii_l2t4_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t4_req_vld,8))) && ($0in_delay(sii_l2t4_req[24] == 0,8)) && ($0in_delay(sii_l2t4_req[25] == 0,8)) && ($0in_delay(sii_l2t4_req[26] == 1,8)) && ($0in_rising_edge($0in_delay(l2t4_sii_iq_dequeue,8))) && !(sii_wri_ecc5_l4_cycle7 == sii_l2b4_ecc[5]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc5_l4_wri_cycle7
*/

wire sii_wri_ecc6_l4_cycle7 =  (`TOP.cpu.sii_l2t4_req[0] ^ `TOP.cpu.sii_l2t4_req[1] ^ `TOP.cpu.sii_l2t4_req[2] ^ `TOP.cpu.sii_l2t4_req[4] ^ `TOP.cpu.sii_l2t4_req[5] ^ `TOP.cpu.sii_l2t4_req[7] ^ `TOP.cpu.sii_l2t4_req[10] ^ `TOP.cpu.sii_l2t4_req[11] ^ `TOP.cpu.sii_l2t4_req[12] ^ `TOP.cpu.sii_l2t4_req[14] ^ `TOP.cpu.sii_l2t4_req[17] ^ `TOP.cpu.sii_l2t4_req[18] ^ `TOP.cpu.sii_l2t4_req[21] ^ `TOP.cpu.sii_l2t4_req[23] ^ `TOP.cpu.sii_l2t4_req[24] ^ `TOP.cpu.sii_l2t4_req[26] ^ `TOP.cpu.sii_l2t4_req[27] ^ `TOP.cpu.sii_l2t4_req[29] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t4_req_vld,8))) && ($0in_delay(sii_l2t4_req[24] == 0,8)) && ($0in_delay(sii_l2t4_req[25] == 0,8)) && ($0in_delay(sii_l2t4_req[26] == 1,8)) && ($0in_rising_edge($0in_delay(l2t4_sii_iq_dequeue,8))) && !(sii_wri_ecc6_l4_cycle7 == sii_l2b4_ecc[6]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc6_l4_wri_cycle7
*/

wire sii_wri_ecc0_l4_cycle8 =  (`TOP.cpu.sii_l2t4_req[0] ^ `TOP.cpu.sii_l2t4_req[1] ^ `TOP.cpu.sii_l2t4_req[3] ^ `TOP.cpu.sii_l2t4_req[4] ^ `TOP.cpu.sii_l2t4_req[6] ^ `TOP.cpu.sii_l2t4_req[8] ^ `TOP.cpu.sii_l2t4_req[10] ^ `TOP.cpu.sii_l2t4_req[11] ^ `TOP.cpu.sii_l2t4_req[13] ^ `TOP.cpu.sii_l2t4_req[15] ^ `TOP.cpu.sii_l2t4_req[17] ^ `TOP.cpu.sii_l2t4_req[19] ^ `TOP.cpu.sii_l2t4_req[21] ^ `TOP.cpu.sii_l2t4_req[23] ^ `TOP.cpu.sii_l2t4_req[25] ^ `TOP.cpu.sii_l2t4_req[26] ^ `TOP.cpu.sii_l2t4_req[28] ^ `TOP.cpu.sii_l2t4_req[30] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t4_req_vld,9))) && ($0in_delay(sii_l2t4_req[24] == 0,9)) && ($0in_delay(sii_l2t4_req[25] == 0,9)) && ($0in_delay(sii_l2t4_req[26] == 1,9)) && ($0in_rising_edge($0in_delay(l2t4_sii_iq_dequeue,9))) && !(sii_wri_ecc0_l4_cycle8 == sii_l2b4_ecc[0]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc0_l4_wri_cycle8
*/

wire sii_wri_ecc1_l4_cycle8 =  (`TOP.cpu.sii_l2t4_req[0] ^ `TOP.cpu.sii_l2t4_req[2] ^ `TOP.cpu.sii_l2t4_req[3] ^ `TOP.cpu.sii_l2t4_req[5] ^ `TOP.cpu.sii_l2t4_req[6] ^ `TOP.cpu.sii_l2t4_req[9] ^ `TOP.cpu.sii_l2t4_req[10] ^ `TOP.cpu.sii_l2t4_req[12] ^ `TOP.cpu.sii_l2t4_req[13] ^ `TOP.cpu.sii_l2t4_req[16] ^ `TOP.cpu.sii_l2t4_req[17] ^ `TOP.cpu.sii_l2t4_req[20] ^ `TOP.cpu.sii_l2t4_req[21] ^ `TOP.cpu.sii_l2t4_req[24] ^ `TOP.cpu.sii_l2t4_req[25] ^ `TOP.cpu.sii_l2t4_req[27] ^ `TOP.cpu.sii_l2t4_req[28] ^ `TOP.cpu.sii_l2t4_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t4_req_vld,9))) && ($0in_delay(sii_l2t4_req[24] == 0,9)) && ($0in_delay(sii_l2t4_req[25] == 0,9)) && ($0in_delay(sii_l2t4_req[26] == 1,9)) && ($0in_rising_edge($0in_delay(l2t4_sii_iq_dequeue,9))) && !(sii_wri_ecc1_l4_cycle8 == sii_l2b4_ecc[1]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc1_l4_wri_cycle8
*/

wire sii_wri_ecc2_l4_cycle8 =  (`TOP.cpu.sii_l2t4_req[1] ^ `TOP.cpu.sii_l2t4_req[2] ^ `TOP.cpu.sii_l2t4_req[3] ^ `TOP.cpu.sii_l2t4_req[7] ^ `TOP.cpu.sii_l2t4_req[8] ^ `TOP.cpu.sii_l2t4_req[9] ^ `TOP.cpu.sii_l2t4_req[10] ^ `TOP.cpu.sii_l2t4_req[14] ^ `TOP.cpu.sii_l2t4_req[15] ^ `TOP.cpu.sii_l2t4_req[16] ^ `TOP.cpu.sii_l2t4_req[17] ^ `TOP.cpu.sii_l2t4_req[22] ^ `TOP.cpu.sii_l2t4_req[23] ^ `TOP.cpu.sii_l2t4_req[24] ^ `TOP.cpu.sii_l2t4_req[25] ^ `TOP.cpu.sii_l2t4_req[29] ^ `TOP.cpu.sii_l2t4_req[30] ^ `TOP.cpu.sii_l2t4_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t4_req_vld,9))) && ($0in_delay(sii_l2t4_req[24] == 0,9)) && ($0in_delay(sii_l2t4_req[25] == 0,9)) && ($0in_delay(sii_l2t4_req[26] == 1,9)) && ($0in_rising_edge($0in_delay(l2t4_sii_iq_dequeue,9))) && !(sii_wri_ecc2_l4_cycle8 == sii_l2b4_ecc[2]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc2_l4_wri_cycle8
*/

wire sii_wri_ecc3_l4_cycle8 =  (`TOP.cpu.sii_l2t4_req[4] ^ `TOP.cpu.sii_l2t4_req[5] ^ `TOP.cpu.sii_l2t4_req[6] ^ `TOP.cpu.sii_l2t4_req[7] ^ `TOP.cpu.sii_l2t4_req[8] ^ `TOP.cpu.sii_l2t4_req[9] ^ `TOP.cpu.sii_l2t4_req[10] ^ `TOP.cpu.sii_l2t4_req[18] ^ `TOP.cpu.sii_l2t4_req[19] ^ `TOP.cpu.sii_l2t4_req[20] ^ `TOP.cpu.sii_l2t4_req[21] ^ `TOP.cpu.sii_l2t4_req[22] ^ `TOP.cpu.sii_l2t4_req[23] ^ `TOP.cpu.sii_l2t4_req[24] ^ `TOP.cpu.sii_l2t4_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t4_req_vld,9))) && ($0in_delay(sii_l2t4_req[24] == 0,9)) && ($0in_delay(sii_l2t4_req[25] == 0,9)) && ($0in_delay(sii_l2t4_req[26] == 1,9)) && ($0in_rising_edge($0in_delay(l2t4_sii_iq_dequeue,9))) && !(sii_wri_ecc3_l4_cycle8 == sii_l2b4_ecc[3]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc3_l4_wri_cycle8
*/

wire sii_wri_ecc4_l4_cycle8 =  ( `TOP.cpu.sii_l2t4_req[11] ^ `TOP.cpu.sii_l2t4_req[12] ^ `TOP.cpu.sii_l2t4_req[13] ^ `TOP.cpu.sii_l2t4_req[14] ^ `TOP.cpu.sii_l2t4_req[15] ^ `TOP.cpu.sii_l2t4_req[16] ^ `TOP.cpu.sii_l2t4_req[17] ^ `TOP.cpu.sii_l2t4_req[18] ^ `TOP.cpu.sii_l2t4_req[19] ^ `TOP.cpu.sii_l2t4_req[20] ^ `TOP.cpu.sii_l2t4_req[21] ^ `TOP.cpu.sii_l2t4_req[22] ^ `TOP.cpu.sii_l2t4_req[23] ^ `TOP.cpu.sii_l2t4_req[24] ^ `TOP.cpu.sii_l2t4_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t4_req_vld,9))) && ($0in_delay(sii_l2t4_req[24] == 0,9)) && ($0in_delay(sii_l2t4_req[25] == 0,9)) && ($0in_delay(sii_l2t4_req[26] == 1,9)) && ($0in_rising_edge($0in_delay(l2t4_sii_iq_dequeue,9))) && !(sii_wri_ecc4_l4_cycle8 == sii_l2b4_ecc[4]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc4_l4_wri_cycle8
*/

wire sii_wri_ecc5_l4_cycle8 =  (`TOP.cpu.sii_l2t4_req[26] ^ `TOP.cpu.sii_l2t4_req[27] ^ `TOP.cpu.sii_l2t4_req[28] ^ `TOP.cpu.sii_l2t4_req[29] ^ `TOP.cpu.sii_l2t4_req[30] ^ `TOP.cpu.sii_l2t4_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t4_req_vld,9))) && ($0in_delay(sii_l2t4_req[24] == 0,9)) && ($0in_delay(sii_l2t4_req[25] == 0,9)) && ($0in_delay(sii_l2t4_req[26] == 1,9)) && ($0in_rising_edge($0in_delay(l2t4_sii_iq_dequeue,9))) && !(sii_wri_ecc5_l4_cycle8 == sii_l2b4_ecc[5]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc5_l4_wri_cycle8
*/

wire sii_wri_ecc6_l4_cycle8 =  (`TOP.cpu.sii_l2t4_req[0] ^ `TOP.cpu.sii_l2t4_req[1] ^ `TOP.cpu.sii_l2t4_req[2] ^ `TOP.cpu.sii_l2t4_req[4] ^ `TOP.cpu.sii_l2t4_req[5] ^ `TOP.cpu.sii_l2t4_req[7] ^ `TOP.cpu.sii_l2t4_req[10] ^ `TOP.cpu.sii_l2t4_req[11] ^ `TOP.cpu.sii_l2t4_req[12] ^ `TOP.cpu.sii_l2t4_req[14] ^ `TOP.cpu.sii_l2t4_req[17] ^ `TOP.cpu.sii_l2t4_req[18] ^ `TOP.cpu.sii_l2t4_req[21] ^ `TOP.cpu.sii_l2t4_req[23] ^ `TOP.cpu.sii_l2t4_req[24] ^ `TOP.cpu.sii_l2t4_req[26] ^ `TOP.cpu.sii_l2t4_req[27] ^ `TOP.cpu.sii_l2t4_req[29] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t4_req_vld,9))) && ($0in_delay(sii_l2t4_req[24] == 0,9)) && ($0in_delay(sii_l2t4_req[25] == 0,9)) && ($0in_delay(sii_l2t4_req[26] == 1,9)) && ($0in_rising_edge($0in_delay(l2t4_sii_iq_dequeue,9))) && !(sii_wri_ecc6_l4_cycle8 == sii_l2b4_ecc[6]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc6_l4_wri_cycle8
*/

wire sii_wri_ecc0_l4_cycle9 =  (`TOP.cpu.sii_l2t4_req[0] ^ `TOP.cpu.sii_l2t4_req[1] ^ `TOP.cpu.sii_l2t4_req[3] ^ `TOP.cpu.sii_l2t4_req[4] ^ `TOP.cpu.sii_l2t4_req[6] ^ `TOP.cpu.sii_l2t4_req[8] ^ `TOP.cpu.sii_l2t4_req[10] ^ `TOP.cpu.sii_l2t4_req[11] ^ `TOP.cpu.sii_l2t4_req[13] ^ `TOP.cpu.sii_l2t4_req[15] ^ `TOP.cpu.sii_l2t4_req[17] ^ `TOP.cpu.sii_l2t4_req[19] ^ `TOP.cpu.sii_l2t4_req[21] ^ `TOP.cpu.sii_l2t4_req[23] ^ `TOP.cpu.sii_l2t4_req[25] ^ `TOP.cpu.sii_l2t4_req[26] ^ `TOP.cpu.sii_l2t4_req[28] ^ `TOP.cpu.sii_l2t4_req[30] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t4_req_vld,10))) && ($0in_delay(sii_l2t4_req[24] == 0,10)) && ($0in_delay(sii_l2t4_req[25] == 0,10)) && ($0in_delay(sii_l2t4_req[26] == 1,10)) && ($0in_rising_edge($0in_delay(l2t4_sii_iq_dequeue,10))) && !(sii_wri_ecc0_l4_cycle9 == sii_l2b4_ecc[0]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc0_l4_wri_cycle9
*/

wire sii_wri_ecc1_l4_cycle9 =  (`TOP.cpu.sii_l2t4_req[0] ^ `TOP.cpu.sii_l2t4_req[2] ^ `TOP.cpu.sii_l2t4_req[3] ^ `TOP.cpu.sii_l2t4_req[5] ^ `TOP.cpu.sii_l2t4_req[6] ^ `TOP.cpu.sii_l2t4_req[9] ^ `TOP.cpu.sii_l2t4_req[10] ^ `TOP.cpu.sii_l2t4_req[12] ^ `TOP.cpu.sii_l2t4_req[13] ^ `TOP.cpu.sii_l2t4_req[16] ^ `TOP.cpu.sii_l2t4_req[17] ^ `TOP.cpu.sii_l2t4_req[20] ^ `TOP.cpu.sii_l2t4_req[21] ^ `TOP.cpu.sii_l2t4_req[24] ^ `TOP.cpu.sii_l2t4_req[25] ^ `TOP.cpu.sii_l2t4_req[27] ^ `TOP.cpu.sii_l2t4_req[28] ^ `TOP.cpu.sii_l2t4_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t4_req_vld,10))) && ($0in_delay(sii_l2t4_req[24] == 0,10)) && ($0in_delay(sii_l2t4_req[25] == 0,10)) && ($0in_delay(sii_l2t4_req[26] == 1,10)) && ($0in_rising_edge($0in_delay(l2t4_sii_iq_dequeue,10))) && !(sii_wri_ecc1_l4_cycle9 == sii_l2b4_ecc[1]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc1_l4_wri_cycle9
*/

wire sii_wri_ecc2_l4_cycle9 =  (`TOP.cpu.sii_l2t4_req[1] ^ `TOP.cpu.sii_l2t4_req[2] ^ `TOP.cpu.sii_l2t4_req[3] ^ `TOP.cpu.sii_l2t4_req[7] ^ `TOP.cpu.sii_l2t4_req[8] ^ `TOP.cpu.sii_l2t4_req[9] ^ `TOP.cpu.sii_l2t4_req[10] ^ `TOP.cpu.sii_l2t4_req[14] ^ `TOP.cpu.sii_l2t4_req[15] ^ `TOP.cpu.sii_l2t4_req[16] ^ `TOP.cpu.sii_l2t4_req[17] ^ `TOP.cpu.sii_l2t4_req[22] ^ `TOP.cpu.sii_l2t4_req[23] ^ `TOP.cpu.sii_l2t4_req[24] ^ `TOP.cpu.sii_l2t4_req[25] ^ `TOP.cpu.sii_l2t4_req[29] ^ `TOP.cpu.sii_l2t4_req[30] ^ `TOP.cpu.sii_l2t4_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t4_req_vld,10))) && ($0in_delay(sii_l2t4_req[24] == 0,10)) && ($0in_delay(sii_l2t4_req[25] == 0,10)) && ($0in_delay(sii_l2t4_req[26] == 1,10)) && ($0in_rising_edge($0in_delay(l2t4_sii_iq_dequeue,10))) && !(sii_wri_ecc2_l4_cycle9 == sii_l2b4_ecc[2]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc2_l4_wri_cycle9
*/

wire sii_wri_ecc3_l4_cycle9 =  (`TOP.cpu.sii_l2t4_req[4] ^ `TOP.cpu.sii_l2t4_req[5] ^ `TOP.cpu.sii_l2t4_req[6] ^ `TOP.cpu.sii_l2t4_req[7] ^ `TOP.cpu.sii_l2t4_req[8] ^ `TOP.cpu.sii_l2t4_req[9] ^ `TOP.cpu.sii_l2t4_req[10] ^ `TOP.cpu.sii_l2t4_req[18] ^ `TOP.cpu.sii_l2t4_req[19] ^ `TOP.cpu.sii_l2t4_req[20] ^ `TOP.cpu.sii_l2t4_req[21] ^ `TOP.cpu.sii_l2t4_req[22] ^ `TOP.cpu.sii_l2t4_req[23] ^ `TOP.cpu.sii_l2t4_req[24] ^ `TOP.cpu.sii_l2t4_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t4_req_vld,10))) && ($0in_delay(sii_l2t4_req[24] == 0,10)) && ($0in_delay(sii_l2t4_req[25] == 0,10)) && ($0in_delay(sii_l2t4_req[26] == 1,10)) && ($0in_rising_edge($0in_delay(l2t4_sii_iq_dequeue,10))) && !(sii_wri_ecc3_l4_cycle9 == sii_l2b4_ecc[3]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc3_l4_wri_cycle9
*/

wire sii_wri_ecc4_l4_cycle9 =  ( `TOP.cpu.sii_l2t4_req[11] ^ `TOP.cpu.sii_l2t4_req[12] ^ `TOP.cpu.sii_l2t4_req[13] ^ `TOP.cpu.sii_l2t4_req[14] ^ `TOP.cpu.sii_l2t4_req[15] ^ `TOP.cpu.sii_l2t4_req[16] ^ `TOP.cpu.sii_l2t4_req[17] ^ `TOP.cpu.sii_l2t4_req[18] ^ `TOP.cpu.sii_l2t4_req[19] ^ `TOP.cpu.sii_l2t4_req[20] ^ `TOP.cpu.sii_l2t4_req[21] ^ `TOP.cpu.sii_l2t4_req[22] ^ `TOP.cpu.sii_l2t4_req[23] ^ `TOP.cpu.sii_l2t4_req[24] ^ `TOP.cpu.sii_l2t4_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t4_req_vld,10))) && ($0in_delay(sii_l2t4_req[24] == 0,10)) && ($0in_delay(sii_l2t4_req[25] == 0,10)) && ($0in_delay(sii_l2t4_req[26] == 1,10)) && ($0in_rising_edge($0in_delay(l2t4_sii_iq_dequeue,10))) && !(sii_wri_ecc4_l4_cycle9 == sii_l2b4_ecc[4]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc4_l4_wri_cycle9
*/

wire sii_wri_ecc5_l4_cycle9 =  (`TOP.cpu.sii_l2t4_req[26] ^ `TOP.cpu.sii_l2t4_req[27] ^ `TOP.cpu.sii_l2t4_req[28] ^ `TOP.cpu.sii_l2t4_req[29] ^ `TOP.cpu.sii_l2t4_req[30] ^ `TOP.cpu.sii_l2t4_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t4_req_vld,10))) && ($0in_delay(sii_l2t4_req[24] == 0,10)) && ($0in_delay(sii_l2t4_req[25] == 0,10)) && ($0in_delay(sii_l2t4_req[26] == 1,10)) && ($0in_rising_edge($0in_delay(l2t4_sii_iq_dequeue,10))) && !(sii_wri_ecc5_l4_cycle9 == sii_l2b4_ecc[5]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc5_l4_wri_cycle9
*/

wire sii_wri_ecc6_l4_cycle9 =  (`TOP.cpu.sii_l2t4_req[0] ^ `TOP.cpu.sii_l2t4_req[1] ^ `TOP.cpu.sii_l2t4_req[2] ^ `TOP.cpu.sii_l2t4_req[4] ^ `TOP.cpu.sii_l2t4_req[5] ^ `TOP.cpu.sii_l2t4_req[7] ^ `TOP.cpu.sii_l2t4_req[10] ^ `TOP.cpu.sii_l2t4_req[11] ^ `TOP.cpu.sii_l2t4_req[12] ^ `TOP.cpu.sii_l2t4_req[14] ^ `TOP.cpu.sii_l2t4_req[17] ^ `TOP.cpu.sii_l2t4_req[18] ^ `TOP.cpu.sii_l2t4_req[21] ^ `TOP.cpu.sii_l2t4_req[23] ^ `TOP.cpu.sii_l2t4_req[24] ^ `TOP.cpu.sii_l2t4_req[26] ^ `TOP.cpu.sii_l2t4_req[27] ^ `TOP.cpu.sii_l2t4_req[29] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t4_req_vld,10))) && ($0in_delay(sii_l2t4_req[24] == 0,10)) && ($0in_delay(sii_l2t4_req[25] == 0,10)) && ($0in_delay(sii_l2t4_req[26] == 1,10)) && ($0in_rising_edge($0in_delay(l2t4_sii_iq_dequeue,10))) && !(sii_wri_ecc6_l4_cycle9 == sii_l2b4_ecc[6]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc6_l4_wri_cycle9
*/

wire sii_wri_ecc0_l4_cycle10 =  (`TOP.cpu.sii_l2t4_req[0] ^ `TOP.cpu.sii_l2t4_req[1] ^ `TOP.cpu.sii_l2t4_req[3] ^ `TOP.cpu.sii_l2t4_req[4] ^ `TOP.cpu.sii_l2t4_req[6] ^ `TOP.cpu.sii_l2t4_req[8] ^ `TOP.cpu.sii_l2t4_req[10] ^ `TOP.cpu.sii_l2t4_req[11] ^ `TOP.cpu.sii_l2t4_req[13] ^ `TOP.cpu.sii_l2t4_req[15] ^ `TOP.cpu.sii_l2t4_req[17] ^ `TOP.cpu.sii_l2t4_req[19] ^ `TOP.cpu.sii_l2t4_req[21] ^ `TOP.cpu.sii_l2t4_req[23] ^ `TOP.cpu.sii_l2t4_req[25] ^ `TOP.cpu.sii_l2t4_req[26] ^ `TOP.cpu.sii_l2t4_req[28] ^ `TOP.cpu.sii_l2t4_req[30] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t4_req_vld,11))) && ($0in_delay(sii_l2t4_req[24] == 0,11)) && ($0in_delay(sii_l2t4_req[25] == 0,11)) && ($0in_delay(sii_l2t4_req[26] == 1,11)) && ($0in_rising_edge($0in_delay(l2t4_sii_iq_dequeue,11))) && !(sii_wri_ecc0_l4_cycle10 == sii_l2b4_ecc[0]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc0_l4_wri_cycle10
*/

wire sii_wri_ecc1_l4_cycle10 =  (`TOP.cpu.sii_l2t4_req[0] ^ `TOP.cpu.sii_l2t4_req[2] ^ `TOP.cpu.sii_l2t4_req[3] ^ `TOP.cpu.sii_l2t4_req[5] ^ `TOP.cpu.sii_l2t4_req[6] ^ `TOP.cpu.sii_l2t4_req[9] ^ `TOP.cpu.sii_l2t4_req[10] ^ `TOP.cpu.sii_l2t4_req[12] ^ `TOP.cpu.sii_l2t4_req[13] ^ `TOP.cpu.sii_l2t4_req[16] ^ `TOP.cpu.sii_l2t4_req[17] ^ `TOP.cpu.sii_l2t4_req[20] ^ `TOP.cpu.sii_l2t4_req[21] ^ `TOP.cpu.sii_l2t4_req[24] ^ `TOP.cpu.sii_l2t4_req[25] ^ `TOP.cpu.sii_l2t4_req[27] ^ `TOP.cpu.sii_l2t4_req[28] ^ `TOP.cpu.sii_l2t4_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t4_req_vld,11))) && ($0in_delay(sii_l2t4_req[24] == 0,11)) && ($0in_delay(sii_l2t4_req[25] == 0,11)) && ($0in_delay(sii_l2t4_req[26] == 1,11)) && ($0in_rising_edge($0in_delay(l2t4_sii_iq_dequeue,11))) && !(sii_wri_ecc1_l4_cycle10 == sii_l2b4_ecc[1]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc1_l4_wri_cycle10
*/

wire sii_wri_ecc2_l4_cycle10 =  (`TOP.cpu.sii_l2t4_req[1] ^ `TOP.cpu.sii_l2t4_req[2] ^ `TOP.cpu.sii_l2t4_req[3] ^ `TOP.cpu.sii_l2t4_req[7] ^ `TOP.cpu.sii_l2t4_req[8] ^ `TOP.cpu.sii_l2t4_req[9] ^ `TOP.cpu.sii_l2t4_req[10] ^ `TOP.cpu.sii_l2t4_req[14] ^ `TOP.cpu.sii_l2t4_req[15] ^ `TOP.cpu.sii_l2t4_req[16] ^ `TOP.cpu.sii_l2t4_req[17] ^ `TOP.cpu.sii_l2t4_req[22] ^ `TOP.cpu.sii_l2t4_req[23] ^ `TOP.cpu.sii_l2t4_req[24] ^ `TOP.cpu.sii_l2t4_req[25] ^ `TOP.cpu.sii_l2t4_req[29] ^ `TOP.cpu.sii_l2t4_req[30] ^ `TOP.cpu.sii_l2t4_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t4_req_vld,11))) && ($0in_delay(sii_l2t4_req[24] == 0,11)) && ($0in_delay(sii_l2t4_req[25] == 0,11)) && ($0in_delay(sii_l2t4_req[26] == 1,11)) && ($0in_rising_edge($0in_delay(l2t4_sii_iq_dequeue,11))) && !(sii_wri_ecc2_l4_cycle10 == sii_l2b4_ecc[2]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc2_l4_wri_cycle10
*/

wire sii_wri_ecc3_l4_cycle10 =  (`TOP.cpu.sii_l2t4_req[4] ^ `TOP.cpu.sii_l2t4_req[5] ^ `TOP.cpu.sii_l2t4_req[6] ^ `TOP.cpu.sii_l2t4_req[7] ^ `TOP.cpu.sii_l2t4_req[8] ^ `TOP.cpu.sii_l2t4_req[9] ^ `TOP.cpu.sii_l2t4_req[10] ^ `TOP.cpu.sii_l2t4_req[18] ^ `TOP.cpu.sii_l2t4_req[19] ^ `TOP.cpu.sii_l2t4_req[20] ^ `TOP.cpu.sii_l2t4_req[21] ^ `TOP.cpu.sii_l2t4_req[22] ^ `TOP.cpu.sii_l2t4_req[23] ^ `TOP.cpu.sii_l2t4_req[24] ^ `TOP.cpu.sii_l2t4_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t4_req_vld,11))) && ($0in_delay(sii_l2t4_req[24] == 0,11)) && ($0in_delay(sii_l2t4_req[25] == 0,11)) && ($0in_delay(sii_l2t4_req[26] == 1,11)) && ($0in_rising_edge($0in_delay(l2t4_sii_iq_dequeue,11))) && !(sii_wri_ecc3_l4_cycle10 == sii_l2b4_ecc[3]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc3_l4_wri_cycle10
*/

wire sii_wri_ecc4_l4_cycle10 =  ( `TOP.cpu.sii_l2t4_req[11] ^ `TOP.cpu.sii_l2t4_req[12] ^ `TOP.cpu.sii_l2t4_req[13] ^ `TOP.cpu.sii_l2t4_req[14] ^ `TOP.cpu.sii_l2t4_req[15] ^ `TOP.cpu.sii_l2t4_req[16] ^ `TOP.cpu.sii_l2t4_req[17] ^ `TOP.cpu.sii_l2t4_req[18] ^ `TOP.cpu.sii_l2t4_req[19] ^ `TOP.cpu.sii_l2t4_req[20] ^ `TOP.cpu.sii_l2t4_req[21] ^ `TOP.cpu.sii_l2t4_req[22] ^ `TOP.cpu.sii_l2t4_req[23] ^ `TOP.cpu.sii_l2t4_req[24] ^ `TOP.cpu.sii_l2t4_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t4_req_vld,11))) && ($0in_delay(sii_l2t4_req[24] == 0,11)) && ($0in_delay(sii_l2t4_req[25] == 0,11)) && ($0in_delay(sii_l2t4_req[26] == 1,11)) && ($0in_rising_edge($0in_delay(l2t4_sii_iq_dequeue,11))) && !(sii_wri_ecc4_l4_cycle10 == sii_l2b4_ecc[4]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc4_l4_wri_cycle10
*/

wire sii_wri_ecc5_l4_cycle10 =  (`TOP.cpu.sii_l2t4_req[26] ^ `TOP.cpu.sii_l2t4_req[27] ^ `TOP.cpu.sii_l2t4_req[28] ^ `TOP.cpu.sii_l2t4_req[29] ^ `TOP.cpu.sii_l2t4_req[30] ^ `TOP.cpu.sii_l2t4_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t4_req_vld,11))) && ($0in_delay(sii_l2t4_req[24] == 0,11)) && ($0in_delay(sii_l2t4_req[25] == 0,11)) && ($0in_delay(sii_l2t4_req[26] == 1,11)) && ($0in_rising_edge($0in_delay(l2t4_sii_iq_dequeue,11))) && !(sii_wri_ecc5_l4_cycle10 == sii_l2b4_ecc[5]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc5_l4_wri_cycle10
*/

wire sii_wri_ecc6_l4_cycle10 =  (`TOP.cpu.sii_l2t4_req[0] ^ `TOP.cpu.sii_l2t4_req[1] ^ `TOP.cpu.sii_l2t4_req[2] ^ `TOP.cpu.sii_l2t4_req[4] ^ `TOP.cpu.sii_l2t4_req[5] ^ `TOP.cpu.sii_l2t4_req[7] ^ `TOP.cpu.sii_l2t4_req[10] ^ `TOP.cpu.sii_l2t4_req[11] ^ `TOP.cpu.sii_l2t4_req[12] ^ `TOP.cpu.sii_l2t4_req[14] ^ `TOP.cpu.sii_l2t4_req[17] ^ `TOP.cpu.sii_l2t4_req[18] ^ `TOP.cpu.sii_l2t4_req[21] ^ `TOP.cpu.sii_l2t4_req[23] ^ `TOP.cpu.sii_l2t4_req[24] ^ `TOP.cpu.sii_l2t4_req[26] ^ `TOP.cpu.sii_l2t4_req[27] ^ `TOP.cpu.sii_l2t4_req[29] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t4_req_vld,11))) && ($0in_delay(sii_l2t4_req[24] == 0,11)) && ($0in_delay(sii_l2t4_req[25] == 0,11)) && ($0in_delay(sii_l2t4_req[26] == 1,11)) && ($0in_rising_edge($0in_delay(l2t4_sii_iq_dequeue,11))) && !(sii_wri_ecc6_l4_cycle10 == sii_l2b4_ecc[6]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc6_l4_wri_cycle10
*/

wire sii_wri_ecc0_l4_cycle11 =  (`TOP.cpu.sii_l2t4_req[0] ^ `TOP.cpu.sii_l2t4_req[1] ^ `TOP.cpu.sii_l2t4_req[3] ^ `TOP.cpu.sii_l2t4_req[4] ^ `TOP.cpu.sii_l2t4_req[6] ^ `TOP.cpu.sii_l2t4_req[8] ^ `TOP.cpu.sii_l2t4_req[10] ^ `TOP.cpu.sii_l2t4_req[11] ^ `TOP.cpu.sii_l2t4_req[13] ^ `TOP.cpu.sii_l2t4_req[15] ^ `TOP.cpu.sii_l2t4_req[17] ^ `TOP.cpu.sii_l2t4_req[19] ^ `TOP.cpu.sii_l2t4_req[21] ^ `TOP.cpu.sii_l2t4_req[23] ^ `TOP.cpu.sii_l2t4_req[25] ^ `TOP.cpu.sii_l2t4_req[26] ^ `TOP.cpu.sii_l2t4_req[28] ^ `TOP.cpu.sii_l2t4_req[30] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t4_req_vld,12))) && ($0in_delay(sii_l2t4_req[24] == 0,12)) && ($0in_delay(sii_l2t4_req[25] == 0,12)) && ($0in_delay(sii_l2t4_req[26] == 1,12)) && ($0in_rising_edge($0in_delay(l2t4_sii_iq_dequeue,12))) && !(sii_wri_ecc0_l4_cycle11 == sii_l2b4_ecc[0]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc0_l4_wri_cycle11
*/

wire sii_wri_ecc1_l4_cycle11 =  (`TOP.cpu.sii_l2t4_req[0] ^ `TOP.cpu.sii_l2t4_req[2] ^ `TOP.cpu.sii_l2t4_req[3] ^ `TOP.cpu.sii_l2t4_req[5] ^ `TOP.cpu.sii_l2t4_req[6] ^ `TOP.cpu.sii_l2t4_req[9] ^ `TOP.cpu.sii_l2t4_req[10] ^ `TOP.cpu.sii_l2t4_req[12] ^ `TOP.cpu.sii_l2t4_req[13] ^ `TOP.cpu.sii_l2t4_req[16] ^ `TOP.cpu.sii_l2t4_req[17] ^ `TOP.cpu.sii_l2t4_req[20] ^ `TOP.cpu.sii_l2t4_req[21] ^ `TOP.cpu.sii_l2t4_req[24] ^ `TOP.cpu.sii_l2t4_req[25] ^ `TOP.cpu.sii_l2t4_req[27] ^ `TOP.cpu.sii_l2t4_req[28] ^ `TOP.cpu.sii_l2t4_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t4_req_vld,12))) && ($0in_delay(sii_l2t4_req[24] == 0,12)) && ($0in_delay(sii_l2t4_req[25] == 0,12)) && ($0in_delay(sii_l2t4_req[26] == 1,12)) && ($0in_rising_edge($0in_delay(l2t4_sii_iq_dequeue,12))) && !(sii_wri_ecc1_l4_cycle11 == sii_l2b4_ecc[1]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc1_l4_wri_cycle11
*/

wire sii_wri_ecc2_l4_cycle11 =  (`TOP.cpu.sii_l2t4_req[1] ^ `TOP.cpu.sii_l2t4_req[2] ^ `TOP.cpu.sii_l2t4_req[3] ^ `TOP.cpu.sii_l2t4_req[7] ^ `TOP.cpu.sii_l2t4_req[8] ^ `TOP.cpu.sii_l2t4_req[9] ^ `TOP.cpu.sii_l2t4_req[10] ^ `TOP.cpu.sii_l2t4_req[14] ^ `TOP.cpu.sii_l2t4_req[15] ^ `TOP.cpu.sii_l2t4_req[16] ^ `TOP.cpu.sii_l2t4_req[17] ^ `TOP.cpu.sii_l2t4_req[22] ^ `TOP.cpu.sii_l2t4_req[23] ^ `TOP.cpu.sii_l2t4_req[24] ^ `TOP.cpu.sii_l2t4_req[25] ^ `TOP.cpu.sii_l2t4_req[29] ^ `TOP.cpu.sii_l2t4_req[30] ^ `TOP.cpu.sii_l2t4_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t4_req_vld,12))) && ($0in_delay(sii_l2t4_req[24] == 0,12)) && ($0in_delay(sii_l2t4_req[25] == 0,12)) && ($0in_delay(sii_l2t4_req[26] == 1,12)) && ($0in_rising_edge($0in_delay(l2t4_sii_iq_dequeue,12))) && !(sii_wri_ecc2_l4_cycle11 == sii_l2b4_ecc[2]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc2_l4_wri_cycle11
*/

wire sii_wri_ecc3_l4_cycle11 =  (`TOP.cpu.sii_l2t4_req[4] ^ `TOP.cpu.sii_l2t4_req[5] ^ `TOP.cpu.sii_l2t4_req[6] ^ `TOP.cpu.sii_l2t4_req[7] ^ `TOP.cpu.sii_l2t4_req[8] ^ `TOP.cpu.sii_l2t4_req[9] ^ `TOP.cpu.sii_l2t4_req[10] ^ `TOP.cpu.sii_l2t4_req[18] ^ `TOP.cpu.sii_l2t4_req[19] ^ `TOP.cpu.sii_l2t4_req[20] ^ `TOP.cpu.sii_l2t4_req[21] ^ `TOP.cpu.sii_l2t4_req[22] ^ `TOP.cpu.sii_l2t4_req[23] ^ `TOP.cpu.sii_l2t4_req[24] ^ `TOP.cpu.sii_l2t4_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t4_req_vld,12))) && ($0in_delay(sii_l2t4_req[24] == 0,12)) && ($0in_delay(sii_l2t4_req[25] == 0,12)) && ($0in_delay(sii_l2t4_req[26] == 1,12)) && ($0in_rising_edge($0in_delay(l2t4_sii_iq_dequeue,12))) && !(sii_wri_ecc3_l4_cycle11 == sii_l2b4_ecc[3]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc3_l4_wri_cycle11
*/

wire sii_wri_ecc4_l4_cycle11 =  ( `TOP.cpu.sii_l2t4_req[11] ^ `TOP.cpu.sii_l2t4_req[12] ^ `TOP.cpu.sii_l2t4_req[13] ^ `TOP.cpu.sii_l2t4_req[14] ^ `TOP.cpu.sii_l2t4_req[15] ^ `TOP.cpu.sii_l2t4_req[16] ^ `TOP.cpu.sii_l2t4_req[17] ^ `TOP.cpu.sii_l2t4_req[18] ^ `TOP.cpu.sii_l2t4_req[19] ^ `TOP.cpu.sii_l2t4_req[20] ^ `TOP.cpu.sii_l2t4_req[21] ^ `TOP.cpu.sii_l2t4_req[22] ^ `TOP.cpu.sii_l2t4_req[23] ^ `TOP.cpu.sii_l2t4_req[24] ^ `TOP.cpu.sii_l2t4_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t4_req_vld,12))) && ($0in_delay(sii_l2t4_req[24] == 0,12)) && ($0in_delay(sii_l2t4_req[25] == 0,12)) && ($0in_delay(sii_l2t4_req[26] == 1,12)) && ($0in_rising_edge($0in_delay(l2t4_sii_iq_dequeue,12))) && !(sii_wri_ecc4_l4_cycle11 == sii_l2b4_ecc[4]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc4_l4_wri_cycle11
*/

wire sii_wri_ecc5_l4_cycle11 =  (`TOP.cpu.sii_l2t4_req[26] ^ `TOP.cpu.sii_l2t4_req[27] ^ `TOP.cpu.sii_l2t4_req[28] ^ `TOP.cpu.sii_l2t4_req[29] ^ `TOP.cpu.sii_l2t4_req[30] ^ `TOP.cpu.sii_l2t4_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t4_req_vld,12))) && ($0in_delay(sii_l2t4_req[24] == 0,12)) && ($0in_delay(sii_l2t4_req[25] == 0,12)) && ($0in_delay(sii_l2t4_req[26] == 1,12)) && ($0in_rising_edge($0in_delay(l2t4_sii_iq_dequeue,12))) && !(sii_wri_ecc5_l4_cycle11 == sii_l2b4_ecc[5]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc5_l4_wri_cycle11
*/

wire sii_wri_ecc6_l4_cycle11 =  (`TOP.cpu.sii_l2t4_req[0] ^ `TOP.cpu.sii_l2t4_req[1] ^ `TOP.cpu.sii_l2t4_req[2] ^ `TOP.cpu.sii_l2t4_req[4] ^ `TOP.cpu.sii_l2t4_req[5] ^ `TOP.cpu.sii_l2t4_req[7] ^ `TOP.cpu.sii_l2t4_req[10] ^ `TOP.cpu.sii_l2t4_req[11] ^ `TOP.cpu.sii_l2t4_req[12] ^ `TOP.cpu.sii_l2t4_req[14] ^ `TOP.cpu.sii_l2t4_req[17] ^ `TOP.cpu.sii_l2t4_req[18] ^ `TOP.cpu.sii_l2t4_req[21] ^ `TOP.cpu.sii_l2t4_req[23] ^ `TOP.cpu.sii_l2t4_req[24] ^ `TOP.cpu.sii_l2t4_req[26] ^ `TOP.cpu.sii_l2t4_req[27] ^ `TOP.cpu.sii_l2t4_req[29] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t4_req_vld,12))) && ($0in_delay(sii_l2t4_req[24] == 0,12)) && ($0in_delay(sii_l2t4_req[25] == 0,12)) && ($0in_delay(sii_l2t4_req[26] == 1,12)) && ($0in_rising_edge($0in_delay(l2t4_sii_iq_dequeue,12))) && !(sii_wri_ecc6_l4_cycle11 == sii_l2b4_ecc[6]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc6_l4_wri_cycle11
*/

wire sii_wri_ecc0_l4_cycle12 =  (`TOP.cpu.sii_l2t4_req[0] ^ `TOP.cpu.sii_l2t4_req[1] ^ `TOP.cpu.sii_l2t4_req[3] ^ `TOP.cpu.sii_l2t4_req[4] ^ `TOP.cpu.sii_l2t4_req[6] ^ `TOP.cpu.sii_l2t4_req[8] ^ `TOP.cpu.sii_l2t4_req[10] ^ `TOP.cpu.sii_l2t4_req[11] ^ `TOP.cpu.sii_l2t4_req[13] ^ `TOP.cpu.sii_l2t4_req[15] ^ `TOP.cpu.sii_l2t4_req[17] ^ `TOP.cpu.sii_l2t4_req[19] ^ `TOP.cpu.sii_l2t4_req[21] ^ `TOP.cpu.sii_l2t4_req[23] ^ `TOP.cpu.sii_l2t4_req[25] ^ `TOP.cpu.sii_l2t4_req[26] ^ `TOP.cpu.sii_l2t4_req[28] ^ `TOP.cpu.sii_l2t4_req[30] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t4_req_vld,13))) && ($0in_delay(sii_l2t4_req[24] == 0,13)) && ($0in_delay(sii_l2t4_req[25] == 0,13)) && ($0in_delay(sii_l2t4_req[26] == 1,13)) && ($0in_rising_edge($0in_delay(l2t4_sii_iq_dequeue,13))) && !(sii_wri_ecc0_l4_cycle12 == sii_l2b4_ecc[0]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc0_l4_wri_cycle12
*/

wire sii_wri_ecc1_l4_cycle12 =  (`TOP.cpu.sii_l2t4_req[0] ^ `TOP.cpu.sii_l2t4_req[2] ^ `TOP.cpu.sii_l2t4_req[3] ^ `TOP.cpu.sii_l2t4_req[5] ^ `TOP.cpu.sii_l2t4_req[6] ^ `TOP.cpu.sii_l2t4_req[9] ^ `TOP.cpu.sii_l2t4_req[10] ^ `TOP.cpu.sii_l2t4_req[12] ^ `TOP.cpu.sii_l2t4_req[13] ^ `TOP.cpu.sii_l2t4_req[16] ^ `TOP.cpu.sii_l2t4_req[17] ^ `TOP.cpu.sii_l2t4_req[20] ^ `TOP.cpu.sii_l2t4_req[21] ^ `TOP.cpu.sii_l2t4_req[24] ^ `TOP.cpu.sii_l2t4_req[25] ^ `TOP.cpu.sii_l2t4_req[27] ^ `TOP.cpu.sii_l2t4_req[28] ^ `TOP.cpu.sii_l2t4_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t4_req_vld,13))) && ($0in_delay(sii_l2t4_req[24] == 0,13)) && ($0in_delay(sii_l2t4_req[25] == 0,13)) && ($0in_delay(sii_l2t4_req[26] == 1,13)) && ($0in_rising_edge($0in_delay(l2t4_sii_iq_dequeue,13))) && !(sii_wri_ecc1_l4_cycle12 == sii_l2b4_ecc[1]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc1_l4_wri_cycle12
*/

wire sii_wri_ecc2_l4_cycle12 =  (`TOP.cpu.sii_l2t4_req[1] ^ `TOP.cpu.sii_l2t4_req[2] ^ `TOP.cpu.sii_l2t4_req[3] ^ `TOP.cpu.sii_l2t4_req[7] ^ `TOP.cpu.sii_l2t4_req[8] ^ `TOP.cpu.sii_l2t4_req[9] ^ `TOP.cpu.sii_l2t4_req[10] ^ `TOP.cpu.sii_l2t4_req[14] ^ `TOP.cpu.sii_l2t4_req[15] ^ `TOP.cpu.sii_l2t4_req[16] ^ `TOP.cpu.sii_l2t4_req[17] ^ `TOP.cpu.sii_l2t4_req[22] ^ `TOP.cpu.sii_l2t4_req[23] ^ `TOP.cpu.sii_l2t4_req[24] ^ `TOP.cpu.sii_l2t4_req[25] ^ `TOP.cpu.sii_l2t4_req[29] ^ `TOP.cpu.sii_l2t4_req[30] ^ `TOP.cpu.sii_l2t4_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t4_req_vld,13))) && ($0in_delay(sii_l2t4_req[24] == 0,13)) && ($0in_delay(sii_l2t4_req[25] == 0,13)) && ($0in_delay(sii_l2t4_req[26] == 1,13)) && ($0in_rising_edge($0in_delay(l2t4_sii_iq_dequeue,13))) && !(sii_wri_ecc2_l4_cycle12 == sii_l2b4_ecc[2]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc2_l4_wri_cycle12
*/

wire sii_wri_ecc3_l4_cycle12 =  (`TOP.cpu.sii_l2t4_req[4] ^ `TOP.cpu.sii_l2t4_req[5] ^ `TOP.cpu.sii_l2t4_req[6] ^ `TOP.cpu.sii_l2t4_req[7] ^ `TOP.cpu.sii_l2t4_req[8] ^ `TOP.cpu.sii_l2t4_req[9] ^ `TOP.cpu.sii_l2t4_req[10] ^ `TOP.cpu.sii_l2t4_req[18] ^ `TOP.cpu.sii_l2t4_req[19] ^ `TOP.cpu.sii_l2t4_req[20] ^ `TOP.cpu.sii_l2t4_req[21] ^ `TOP.cpu.sii_l2t4_req[22] ^ `TOP.cpu.sii_l2t4_req[23] ^ `TOP.cpu.sii_l2t4_req[24] ^ `TOP.cpu.sii_l2t4_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t4_req_vld,13))) && ($0in_delay(sii_l2t4_req[24] == 0,13)) && ($0in_delay(sii_l2t4_req[25] == 0,13)) && ($0in_delay(sii_l2t4_req[26] == 1,13)) && ($0in_rising_edge($0in_delay(l2t4_sii_iq_dequeue,13))) && !(sii_wri_ecc3_l4_cycle12 == sii_l2b4_ecc[3]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc3_l4_wri_cycle12
*/

wire sii_wri_ecc4_l4_cycle12 =  ( `TOP.cpu.sii_l2t4_req[11] ^ `TOP.cpu.sii_l2t4_req[12] ^ `TOP.cpu.sii_l2t4_req[13] ^ `TOP.cpu.sii_l2t4_req[14] ^ `TOP.cpu.sii_l2t4_req[15] ^ `TOP.cpu.sii_l2t4_req[16] ^ `TOP.cpu.sii_l2t4_req[17] ^ `TOP.cpu.sii_l2t4_req[18] ^ `TOP.cpu.sii_l2t4_req[19] ^ `TOP.cpu.sii_l2t4_req[20] ^ `TOP.cpu.sii_l2t4_req[21] ^ `TOP.cpu.sii_l2t4_req[22] ^ `TOP.cpu.sii_l2t4_req[23] ^ `TOP.cpu.sii_l2t4_req[24] ^ `TOP.cpu.sii_l2t4_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t4_req_vld,13))) && ($0in_delay(sii_l2t4_req[24] == 0,13)) && ($0in_delay(sii_l2t4_req[25] == 0,13)) && ($0in_delay(sii_l2t4_req[26] == 1,13)) && ($0in_rising_edge($0in_delay(l2t4_sii_iq_dequeue,13))) && !(sii_wri_ecc4_l4_cycle12 == sii_l2b4_ecc[4]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc4_l4_wri_cycle12
*/

wire sii_wri_ecc5_l4_cycle12 =  (`TOP.cpu.sii_l2t4_req[26] ^ `TOP.cpu.sii_l2t4_req[27] ^ `TOP.cpu.sii_l2t4_req[28] ^ `TOP.cpu.sii_l2t4_req[29] ^ `TOP.cpu.sii_l2t4_req[30] ^ `TOP.cpu.sii_l2t4_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t4_req_vld,13))) && ($0in_delay(sii_l2t4_req[24] == 0,13)) && ($0in_delay(sii_l2t4_req[25] == 0,13)) && ($0in_delay(sii_l2t4_req[26] == 1,13)) && ($0in_rising_edge($0in_delay(l2t4_sii_iq_dequeue,13))) && !(sii_wri_ecc5_l4_cycle12 == sii_l2b4_ecc[5]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc5_l4_wri_cycle12
*/

wire sii_wri_ecc6_l4_cycle12 =  (`TOP.cpu.sii_l2t4_req[0] ^ `TOP.cpu.sii_l2t4_req[1] ^ `TOP.cpu.sii_l2t4_req[2] ^ `TOP.cpu.sii_l2t4_req[4] ^ `TOP.cpu.sii_l2t4_req[5] ^ `TOP.cpu.sii_l2t4_req[7] ^ `TOP.cpu.sii_l2t4_req[10] ^ `TOP.cpu.sii_l2t4_req[11] ^ `TOP.cpu.sii_l2t4_req[12] ^ `TOP.cpu.sii_l2t4_req[14] ^ `TOP.cpu.sii_l2t4_req[17] ^ `TOP.cpu.sii_l2t4_req[18] ^ `TOP.cpu.sii_l2t4_req[21] ^ `TOP.cpu.sii_l2t4_req[23] ^ `TOP.cpu.sii_l2t4_req[24] ^ `TOP.cpu.sii_l2t4_req[26] ^ `TOP.cpu.sii_l2t4_req[27] ^ `TOP.cpu.sii_l2t4_req[29] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t4_req_vld,13))) && ($0in_delay(sii_l2t4_req[24] == 0,13)) && ($0in_delay(sii_l2t4_req[25] == 0,13)) && ($0in_delay(sii_l2t4_req[26] == 1,13)) && ($0in_rising_edge($0in_delay(l2t4_sii_iq_dequeue,13))) && !(sii_wri_ecc6_l4_cycle12 == sii_l2b4_ecc[6]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc6_l4_wri_cycle12
*/

wire sii_wri_ecc0_l4_cycle13 =  (`TOP.cpu.sii_l2t4_req[0] ^ `TOP.cpu.sii_l2t4_req[1] ^ `TOP.cpu.sii_l2t4_req[3] ^ `TOP.cpu.sii_l2t4_req[4] ^ `TOP.cpu.sii_l2t4_req[6] ^ `TOP.cpu.sii_l2t4_req[8] ^ `TOP.cpu.sii_l2t4_req[10] ^ `TOP.cpu.sii_l2t4_req[11] ^ `TOP.cpu.sii_l2t4_req[13] ^ `TOP.cpu.sii_l2t4_req[15] ^ `TOP.cpu.sii_l2t4_req[17] ^ `TOP.cpu.sii_l2t4_req[19] ^ `TOP.cpu.sii_l2t4_req[21] ^ `TOP.cpu.sii_l2t4_req[23] ^ `TOP.cpu.sii_l2t4_req[25] ^ `TOP.cpu.sii_l2t4_req[26] ^ `TOP.cpu.sii_l2t4_req[28] ^ `TOP.cpu.sii_l2t4_req[30] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t4_req_vld,14))) && ($0in_delay(sii_l2t4_req[24] == 0,14)) && ($0in_delay(sii_l2t4_req[25] == 0,14)) && ($0in_delay(sii_l2t4_req[26] == 1,14)) && ($0in_rising_edge($0in_delay(l2t4_sii_iq_dequeue,14))) && !(sii_wri_ecc0_l4_cycle13 == sii_l2b4_ecc[0]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc0_l4_wri_cycle13
*/

wire sii_wri_ecc1_l4_cycle13 =  (`TOP.cpu.sii_l2t4_req[0] ^ `TOP.cpu.sii_l2t4_req[2] ^ `TOP.cpu.sii_l2t4_req[3] ^ `TOP.cpu.sii_l2t4_req[5] ^ `TOP.cpu.sii_l2t4_req[6] ^ `TOP.cpu.sii_l2t4_req[9] ^ `TOP.cpu.sii_l2t4_req[10] ^ `TOP.cpu.sii_l2t4_req[12] ^ `TOP.cpu.sii_l2t4_req[13] ^ `TOP.cpu.sii_l2t4_req[16] ^ `TOP.cpu.sii_l2t4_req[17] ^ `TOP.cpu.sii_l2t4_req[20] ^ `TOP.cpu.sii_l2t4_req[21] ^ `TOP.cpu.sii_l2t4_req[24] ^ `TOP.cpu.sii_l2t4_req[25] ^ `TOP.cpu.sii_l2t4_req[27] ^ `TOP.cpu.sii_l2t4_req[28] ^ `TOP.cpu.sii_l2t4_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t4_req_vld,14))) && ($0in_delay(sii_l2t4_req[24] == 0,14)) && ($0in_delay(sii_l2t4_req[25] == 0,14)) && ($0in_delay(sii_l2t4_req[26] == 1,14)) && ($0in_rising_edge($0in_delay(l2t4_sii_iq_dequeue,14))) && !(sii_wri_ecc1_l4_cycle13 == sii_l2b4_ecc[1]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc1_l4_wri_cycle13
*/

wire sii_wri_ecc2_l4_cycle13 =  (`TOP.cpu.sii_l2t4_req[1] ^ `TOP.cpu.sii_l2t4_req[2] ^ `TOP.cpu.sii_l2t4_req[3] ^ `TOP.cpu.sii_l2t4_req[7] ^ `TOP.cpu.sii_l2t4_req[8] ^ `TOP.cpu.sii_l2t4_req[9] ^ `TOP.cpu.sii_l2t4_req[10] ^ `TOP.cpu.sii_l2t4_req[14] ^ `TOP.cpu.sii_l2t4_req[15] ^ `TOP.cpu.sii_l2t4_req[16] ^ `TOP.cpu.sii_l2t4_req[17] ^ `TOP.cpu.sii_l2t4_req[22] ^ `TOP.cpu.sii_l2t4_req[23] ^ `TOP.cpu.sii_l2t4_req[24] ^ `TOP.cpu.sii_l2t4_req[25] ^ `TOP.cpu.sii_l2t4_req[29] ^ `TOP.cpu.sii_l2t4_req[30] ^ `TOP.cpu.sii_l2t4_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t4_req_vld,14))) && ($0in_delay(sii_l2t4_req[24] == 0,14)) && ($0in_delay(sii_l2t4_req[25] == 0,14)) && ($0in_delay(sii_l2t4_req[26] == 1,14)) && ($0in_rising_edge($0in_delay(l2t4_sii_iq_dequeue,14))) && !(sii_wri_ecc2_l4_cycle13 == sii_l2b4_ecc[2]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc2_l4_wri_cycle13
*/

wire sii_wri_ecc3_l4_cycle13 =  (`TOP.cpu.sii_l2t4_req[4] ^ `TOP.cpu.sii_l2t4_req[5] ^ `TOP.cpu.sii_l2t4_req[6] ^ `TOP.cpu.sii_l2t4_req[7] ^ `TOP.cpu.sii_l2t4_req[8] ^ `TOP.cpu.sii_l2t4_req[9] ^ `TOP.cpu.sii_l2t4_req[10] ^ `TOP.cpu.sii_l2t4_req[18] ^ `TOP.cpu.sii_l2t4_req[19] ^ `TOP.cpu.sii_l2t4_req[20] ^ `TOP.cpu.sii_l2t4_req[21] ^ `TOP.cpu.sii_l2t4_req[22] ^ `TOP.cpu.sii_l2t4_req[23] ^ `TOP.cpu.sii_l2t4_req[24] ^ `TOP.cpu.sii_l2t4_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t4_req_vld,14))) && ($0in_delay(sii_l2t4_req[24] == 0,14)) && ($0in_delay(sii_l2t4_req[25] == 0,14)) && ($0in_delay(sii_l2t4_req[26] == 1,14)) && ($0in_rising_edge($0in_delay(l2t4_sii_iq_dequeue,14))) && !(sii_wri_ecc3_l4_cycle13 == sii_l2b4_ecc[3]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc3_l4_wri_cycle13
*/

wire sii_wri_ecc4_l4_cycle13 =  ( `TOP.cpu.sii_l2t4_req[11] ^ `TOP.cpu.sii_l2t4_req[12] ^ `TOP.cpu.sii_l2t4_req[13] ^ `TOP.cpu.sii_l2t4_req[14] ^ `TOP.cpu.sii_l2t4_req[15] ^ `TOP.cpu.sii_l2t4_req[16] ^ `TOP.cpu.sii_l2t4_req[17] ^ `TOP.cpu.sii_l2t4_req[18] ^ `TOP.cpu.sii_l2t4_req[19] ^ `TOP.cpu.sii_l2t4_req[20] ^ `TOP.cpu.sii_l2t4_req[21] ^ `TOP.cpu.sii_l2t4_req[22] ^ `TOP.cpu.sii_l2t4_req[23] ^ `TOP.cpu.sii_l2t4_req[24] ^ `TOP.cpu.sii_l2t4_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t4_req_vld,14))) && ($0in_delay(sii_l2t4_req[24] == 0,14)) && ($0in_delay(sii_l2t4_req[25] == 0,14)) && ($0in_delay(sii_l2t4_req[26] == 1,14)) && ($0in_rising_edge($0in_delay(l2t4_sii_iq_dequeue,14))) && !(sii_wri_ecc4_l4_cycle13 == sii_l2b4_ecc[4]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc4_l4_wri_cycle13
*/

wire sii_wri_ecc5_l4_cycle13 =  (`TOP.cpu.sii_l2t4_req[26] ^ `TOP.cpu.sii_l2t4_req[27] ^ `TOP.cpu.sii_l2t4_req[28] ^ `TOP.cpu.sii_l2t4_req[29] ^ `TOP.cpu.sii_l2t4_req[30] ^ `TOP.cpu.sii_l2t4_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t4_req_vld,14))) && ($0in_delay(sii_l2t4_req[24] == 0,14)) && ($0in_delay(sii_l2t4_req[25] == 0,14)) && ($0in_delay(sii_l2t4_req[26] == 1,14)) && ($0in_rising_edge($0in_delay(l2t4_sii_iq_dequeue,14))) && !(sii_wri_ecc5_l4_cycle13 == sii_l2b4_ecc[5]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc5_l4_wri_cycle13
*/

wire sii_wri_ecc6_l4_cycle13 =  (`TOP.cpu.sii_l2t4_req[0] ^ `TOP.cpu.sii_l2t4_req[1] ^ `TOP.cpu.sii_l2t4_req[2] ^ `TOP.cpu.sii_l2t4_req[4] ^ `TOP.cpu.sii_l2t4_req[5] ^ `TOP.cpu.sii_l2t4_req[7] ^ `TOP.cpu.sii_l2t4_req[10] ^ `TOP.cpu.sii_l2t4_req[11] ^ `TOP.cpu.sii_l2t4_req[12] ^ `TOP.cpu.sii_l2t4_req[14] ^ `TOP.cpu.sii_l2t4_req[17] ^ `TOP.cpu.sii_l2t4_req[18] ^ `TOP.cpu.sii_l2t4_req[21] ^ `TOP.cpu.sii_l2t4_req[23] ^ `TOP.cpu.sii_l2t4_req[24] ^ `TOP.cpu.sii_l2t4_req[26] ^ `TOP.cpu.sii_l2t4_req[27] ^ `TOP.cpu.sii_l2t4_req[29] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t4_req_vld,14))) && ($0in_delay(sii_l2t4_req[24] == 0,14)) && ($0in_delay(sii_l2t4_req[25] == 0,14)) && ($0in_delay(sii_l2t4_req[26] == 1,14)) && ($0in_rising_edge($0in_delay(l2t4_sii_iq_dequeue,14))) && !(sii_wri_ecc6_l4_cycle13 == sii_l2b4_ecc[6]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc6_l4_wri_cycle13
*/

wire sii_wri_ecc0_l4_cycle14 =  (`TOP.cpu.sii_l2t4_req[0] ^ `TOP.cpu.sii_l2t4_req[1] ^ `TOP.cpu.sii_l2t4_req[3] ^ `TOP.cpu.sii_l2t4_req[4] ^ `TOP.cpu.sii_l2t4_req[6] ^ `TOP.cpu.sii_l2t4_req[8] ^ `TOP.cpu.sii_l2t4_req[10] ^ `TOP.cpu.sii_l2t4_req[11] ^ `TOP.cpu.sii_l2t4_req[13] ^ `TOP.cpu.sii_l2t4_req[15] ^ `TOP.cpu.sii_l2t4_req[17] ^ `TOP.cpu.sii_l2t4_req[19] ^ `TOP.cpu.sii_l2t4_req[21] ^ `TOP.cpu.sii_l2t4_req[23] ^ `TOP.cpu.sii_l2t4_req[25] ^ `TOP.cpu.sii_l2t4_req[26] ^ `TOP.cpu.sii_l2t4_req[28] ^ `TOP.cpu.sii_l2t4_req[30] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t4_req_vld,15))) && ($0in_delay(sii_l2t4_req[24] == 0,15)) && ($0in_delay(sii_l2t4_req[25] == 0,15)) && ($0in_delay(sii_l2t4_req[26] == 1,15)) && ($0in_rising_edge($0in_delay(l2t4_sii_iq_dequeue,15))) && !(sii_wri_ecc0_l4_cycle14 == sii_l2b4_ecc[0]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc0_l4_wri_cycle14
*/

wire sii_wri_ecc1_l4_cycle14 =  (`TOP.cpu.sii_l2t4_req[0] ^ `TOP.cpu.sii_l2t4_req[2] ^ `TOP.cpu.sii_l2t4_req[3] ^ `TOP.cpu.sii_l2t4_req[5] ^ `TOP.cpu.sii_l2t4_req[6] ^ `TOP.cpu.sii_l2t4_req[9] ^ `TOP.cpu.sii_l2t4_req[10] ^ `TOP.cpu.sii_l2t4_req[12] ^ `TOP.cpu.sii_l2t4_req[13] ^ `TOP.cpu.sii_l2t4_req[16] ^ `TOP.cpu.sii_l2t4_req[17] ^ `TOP.cpu.sii_l2t4_req[20] ^ `TOP.cpu.sii_l2t4_req[21] ^ `TOP.cpu.sii_l2t4_req[24] ^ `TOP.cpu.sii_l2t4_req[25] ^ `TOP.cpu.sii_l2t4_req[27] ^ `TOP.cpu.sii_l2t4_req[28] ^ `TOP.cpu.sii_l2t4_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t4_req_vld,15))) && ($0in_delay(sii_l2t4_req[24] == 0,15)) && ($0in_delay(sii_l2t4_req[25] == 0,15)) && ($0in_delay(sii_l2t4_req[26] == 1,15)) && ($0in_rising_edge($0in_delay(l2t4_sii_iq_dequeue,15))) && !(sii_wri_ecc1_l4_cycle14 == sii_l2b4_ecc[1]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc1_l4_wri_cycle14
*/

wire sii_wri_ecc2_l4_cycle14 =  (`TOP.cpu.sii_l2t4_req[1] ^ `TOP.cpu.sii_l2t4_req[2] ^ `TOP.cpu.sii_l2t4_req[3] ^ `TOP.cpu.sii_l2t4_req[7] ^ `TOP.cpu.sii_l2t4_req[8] ^ `TOP.cpu.sii_l2t4_req[9] ^ `TOP.cpu.sii_l2t4_req[10] ^ `TOP.cpu.sii_l2t4_req[14] ^ `TOP.cpu.sii_l2t4_req[15] ^ `TOP.cpu.sii_l2t4_req[16] ^ `TOP.cpu.sii_l2t4_req[17] ^ `TOP.cpu.sii_l2t4_req[22] ^ `TOP.cpu.sii_l2t4_req[23] ^ `TOP.cpu.sii_l2t4_req[24] ^ `TOP.cpu.sii_l2t4_req[25] ^ `TOP.cpu.sii_l2t4_req[29] ^ `TOP.cpu.sii_l2t4_req[30] ^ `TOP.cpu.sii_l2t4_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t4_req_vld,15))) && ($0in_delay(sii_l2t4_req[24] == 0,15)) && ($0in_delay(sii_l2t4_req[25] == 0,15)) && ($0in_delay(sii_l2t4_req[26] == 1,15)) && ($0in_rising_edge($0in_delay(l2t4_sii_iq_dequeue,15))) && !(sii_wri_ecc2_l4_cycle14 == sii_l2b4_ecc[2]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc2_l4_wri_cycle14
*/

wire sii_wri_ecc3_l4_cycle14 =  (`TOP.cpu.sii_l2t4_req[4] ^ `TOP.cpu.sii_l2t4_req[5] ^ `TOP.cpu.sii_l2t4_req[6] ^ `TOP.cpu.sii_l2t4_req[7] ^ `TOP.cpu.sii_l2t4_req[8] ^ `TOP.cpu.sii_l2t4_req[9] ^ `TOP.cpu.sii_l2t4_req[10] ^ `TOP.cpu.sii_l2t4_req[18] ^ `TOP.cpu.sii_l2t4_req[19] ^ `TOP.cpu.sii_l2t4_req[20] ^ `TOP.cpu.sii_l2t4_req[21] ^ `TOP.cpu.sii_l2t4_req[22] ^ `TOP.cpu.sii_l2t4_req[23] ^ `TOP.cpu.sii_l2t4_req[24] ^ `TOP.cpu.sii_l2t4_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t4_req_vld,15))) && ($0in_delay(sii_l2t4_req[24] == 0,15)) && ($0in_delay(sii_l2t4_req[25] == 0,15)) && ($0in_delay(sii_l2t4_req[26] == 1,15)) && ($0in_rising_edge($0in_delay(l2t4_sii_iq_dequeue,15))) && !(sii_wri_ecc3_l4_cycle14 == sii_l2b4_ecc[3]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc3_l4_wri_cycle14
*/

wire sii_wri_ecc4_l4_cycle14 =  ( `TOP.cpu.sii_l2t4_req[11] ^ `TOP.cpu.sii_l2t4_req[12] ^ `TOP.cpu.sii_l2t4_req[13] ^ `TOP.cpu.sii_l2t4_req[14] ^ `TOP.cpu.sii_l2t4_req[15] ^ `TOP.cpu.sii_l2t4_req[16] ^ `TOP.cpu.sii_l2t4_req[17] ^ `TOP.cpu.sii_l2t4_req[18] ^ `TOP.cpu.sii_l2t4_req[19] ^ `TOP.cpu.sii_l2t4_req[20] ^ `TOP.cpu.sii_l2t4_req[21] ^ `TOP.cpu.sii_l2t4_req[22] ^ `TOP.cpu.sii_l2t4_req[23] ^ `TOP.cpu.sii_l2t4_req[24] ^ `TOP.cpu.sii_l2t4_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t4_req_vld,15))) && ($0in_delay(sii_l2t4_req[24] == 0,15)) && ($0in_delay(sii_l2t4_req[25] == 0,15)) && ($0in_delay(sii_l2t4_req[26] == 1,15)) && ($0in_rising_edge($0in_delay(l2t4_sii_iq_dequeue,15))) && !(sii_wri_ecc4_l4_cycle14 == sii_l2b4_ecc[4]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc4_l4_wri_cycle14
*/

wire sii_wri_ecc5_l4_cycle14 =  (`TOP.cpu.sii_l2t4_req[26] ^ `TOP.cpu.sii_l2t4_req[27] ^ `TOP.cpu.sii_l2t4_req[28] ^ `TOP.cpu.sii_l2t4_req[29] ^ `TOP.cpu.sii_l2t4_req[30] ^ `TOP.cpu.sii_l2t4_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t4_req_vld,15))) && ($0in_delay(sii_l2t4_req[24] == 0,15)) && ($0in_delay(sii_l2t4_req[25] == 0,15)) && ($0in_delay(sii_l2t4_req[26] == 1,15)) && ($0in_rising_edge($0in_delay(l2t4_sii_iq_dequeue,15))) && !(sii_wri_ecc5_l4_cycle14 == sii_l2b4_ecc[5]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc5_l4_wri_cycle14
*/

wire sii_wri_ecc6_l4_cycle14 =  (`TOP.cpu.sii_l2t4_req[0] ^ `TOP.cpu.sii_l2t4_req[1] ^ `TOP.cpu.sii_l2t4_req[2] ^ `TOP.cpu.sii_l2t4_req[4] ^ `TOP.cpu.sii_l2t4_req[5] ^ `TOP.cpu.sii_l2t4_req[7] ^ `TOP.cpu.sii_l2t4_req[10] ^ `TOP.cpu.sii_l2t4_req[11] ^ `TOP.cpu.sii_l2t4_req[12] ^ `TOP.cpu.sii_l2t4_req[14] ^ `TOP.cpu.sii_l2t4_req[17] ^ `TOP.cpu.sii_l2t4_req[18] ^ `TOP.cpu.sii_l2t4_req[21] ^ `TOP.cpu.sii_l2t4_req[23] ^ `TOP.cpu.sii_l2t4_req[24] ^ `TOP.cpu.sii_l2t4_req[26] ^ `TOP.cpu.sii_l2t4_req[27] ^ `TOP.cpu.sii_l2t4_req[29] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t4_req_vld,15))) && ($0in_delay(sii_l2t4_req[24] == 0,15)) && ($0in_delay(sii_l2t4_req[25] == 0,15)) && ($0in_delay(sii_l2t4_req[26] == 1,15)) && ($0in_rising_edge($0in_delay(l2t4_sii_iq_dequeue,15))) && !(sii_wri_ecc6_l4_cycle14 == sii_l2b4_ecc[6]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc6_l4_wri_cycle14
*/

wire sii_wri_ecc0_l4_cycle15 =  (`TOP.cpu.sii_l2t4_req[0] ^ `TOP.cpu.sii_l2t4_req[1] ^ `TOP.cpu.sii_l2t4_req[3] ^ `TOP.cpu.sii_l2t4_req[4] ^ `TOP.cpu.sii_l2t4_req[6] ^ `TOP.cpu.sii_l2t4_req[8] ^ `TOP.cpu.sii_l2t4_req[10] ^ `TOP.cpu.sii_l2t4_req[11] ^ `TOP.cpu.sii_l2t4_req[13] ^ `TOP.cpu.sii_l2t4_req[15] ^ `TOP.cpu.sii_l2t4_req[17] ^ `TOP.cpu.sii_l2t4_req[19] ^ `TOP.cpu.sii_l2t4_req[21] ^ `TOP.cpu.sii_l2t4_req[23] ^ `TOP.cpu.sii_l2t4_req[25] ^ `TOP.cpu.sii_l2t4_req[26] ^ `TOP.cpu.sii_l2t4_req[28] ^ `TOP.cpu.sii_l2t4_req[30] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t4_req_vld,16))) && ($0in_delay(sii_l2t4_req[24] == 0,16)) && ($0in_delay(sii_l2t4_req[25] == 0,16)) && ($0in_delay(sii_l2t4_req[26] == 1,16)) && ($0in_rising_edge($0in_delay(l2t4_sii_iq_dequeue,16))) && !(sii_wri_ecc0_l4_cycle15 == sii_l2b4_ecc[0]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc0_l4_wri_cycle15
*/

wire sii_wri_ecc1_l4_cycle15 =  (`TOP.cpu.sii_l2t4_req[0] ^ `TOP.cpu.sii_l2t4_req[2] ^ `TOP.cpu.sii_l2t4_req[3] ^ `TOP.cpu.sii_l2t4_req[5] ^ `TOP.cpu.sii_l2t4_req[6] ^ `TOP.cpu.sii_l2t4_req[9] ^ `TOP.cpu.sii_l2t4_req[10] ^ `TOP.cpu.sii_l2t4_req[12] ^ `TOP.cpu.sii_l2t4_req[13] ^ `TOP.cpu.sii_l2t4_req[16] ^ `TOP.cpu.sii_l2t4_req[17] ^ `TOP.cpu.sii_l2t4_req[20] ^ `TOP.cpu.sii_l2t4_req[21] ^ `TOP.cpu.sii_l2t4_req[24] ^ `TOP.cpu.sii_l2t4_req[25] ^ `TOP.cpu.sii_l2t4_req[27] ^ `TOP.cpu.sii_l2t4_req[28] ^ `TOP.cpu.sii_l2t4_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t4_req_vld,16))) && ($0in_delay(sii_l2t4_req[24] == 0,16)) && ($0in_delay(sii_l2t4_req[25] == 0,16)) && ($0in_delay(sii_l2t4_req[26] == 1,16)) && ($0in_rising_edge($0in_delay(l2t4_sii_iq_dequeue,16))) && !(sii_wri_ecc1_l4_cycle15 == sii_l2b4_ecc[1]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc1_l4_wri_cycle15
*/

wire sii_wri_ecc2_l4_cycle15 =  (`TOP.cpu.sii_l2t4_req[1] ^ `TOP.cpu.sii_l2t4_req[2] ^ `TOP.cpu.sii_l2t4_req[3] ^ `TOP.cpu.sii_l2t4_req[7] ^ `TOP.cpu.sii_l2t4_req[8] ^ `TOP.cpu.sii_l2t4_req[9] ^ `TOP.cpu.sii_l2t4_req[10] ^ `TOP.cpu.sii_l2t4_req[14] ^ `TOP.cpu.sii_l2t4_req[15] ^ `TOP.cpu.sii_l2t4_req[16] ^ `TOP.cpu.sii_l2t4_req[17] ^ `TOP.cpu.sii_l2t4_req[22] ^ `TOP.cpu.sii_l2t4_req[23] ^ `TOP.cpu.sii_l2t4_req[24] ^ `TOP.cpu.sii_l2t4_req[25] ^ `TOP.cpu.sii_l2t4_req[29] ^ `TOP.cpu.sii_l2t4_req[30] ^ `TOP.cpu.sii_l2t4_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t4_req_vld,16))) && ($0in_delay(sii_l2t4_req[24] == 0,16)) && ($0in_delay(sii_l2t4_req[25] == 0,16)) && ($0in_delay(sii_l2t4_req[26] == 1,16)) && ($0in_rising_edge($0in_delay(l2t4_sii_iq_dequeue,16))) && !(sii_wri_ecc2_l4_cycle15 == sii_l2b4_ecc[2]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc2_l4_wri_cycle15
*/

wire sii_wri_ecc3_l4_cycle15 =  (`TOP.cpu.sii_l2t4_req[4] ^ `TOP.cpu.sii_l2t4_req[5] ^ `TOP.cpu.sii_l2t4_req[6] ^ `TOP.cpu.sii_l2t4_req[7] ^ `TOP.cpu.sii_l2t4_req[8] ^ `TOP.cpu.sii_l2t4_req[9] ^ `TOP.cpu.sii_l2t4_req[10] ^ `TOP.cpu.sii_l2t4_req[18] ^ `TOP.cpu.sii_l2t4_req[19] ^ `TOP.cpu.sii_l2t4_req[20] ^ `TOP.cpu.sii_l2t4_req[21] ^ `TOP.cpu.sii_l2t4_req[22] ^ `TOP.cpu.sii_l2t4_req[23] ^ `TOP.cpu.sii_l2t4_req[24] ^ `TOP.cpu.sii_l2t4_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t4_req_vld,16))) && ($0in_delay(sii_l2t4_req[24] == 0,16)) && ($0in_delay(sii_l2t4_req[25] == 0,16)) && ($0in_delay(sii_l2t4_req[26] == 1,16)) && ($0in_rising_edge($0in_delay(l2t4_sii_iq_dequeue,16))) && !(sii_wri_ecc3_l4_cycle15 == sii_l2b4_ecc[3]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc3_l4_wri_cycle15
*/

wire sii_wri_ecc4_l4_cycle15 =  ( `TOP.cpu.sii_l2t4_req[11] ^ `TOP.cpu.sii_l2t4_req[12] ^ `TOP.cpu.sii_l2t4_req[13] ^ `TOP.cpu.sii_l2t4_req[14] ^ `TOP.cpu.sii_l2t4_req[15] ^ `TOP.cpu.sii_l2t4_req[16] ^ `TOP.cpu.sii_l2t4_req[17] ^ `TOP.cpu.sii_l2t4_req[18] ^ `TOP.cpu.sii_l2t4_req[19] ^ `TOP.cpu.sii_l2t4_req[20] ^ `TOP.cpu.sii_l2t4_req[21] ^ `TOP.cpu.sii_l2t4_req[22] ^ `TOP.cpu.sii_l2t4_req[23] ^ `TOP.cpu.sii_l2t4_req[24] ^ `TOP.cpu.sii_l2t4_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t4_req_vld,16))) && ($0in_delay(sii_l2t4_req[24] == 0,16)) && ($0in_delay(sii_l2t4_req[25] == 0,16)) && ($0in_delay(sii_l2t4_req[26] == 1,16)) && ($0in_rising_edge($0in_delay(l2t4_sii_iq_dequeue,16))) && !(sii_wri_ecc4_l4_cycle15 == sii_l2b4_ecc[4]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc4_l4_wri_cycle15
*/

wire sii_wri_ecc5_l4_cycle15 =  (`TOP.cpu.sii_l2t4_req[26] ^ `TOP.cpu.sii_l2t4_req[27] ^ `TOP.cpu.sii_l2t4_req[28] ^ `TOP.cpu.sii_l2t4_req[29] ^ `TOP.cpu.sii_l2t4_req[30] ^ `TOP.cpu.sii_l2t4_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t4_req_vld,16))) && ($0in_delay(sii_l2t4_req[24] == 0,16)) && ($0in_delay(sii_l2t4_req[25] == 0,16)) && ($0in_delay(sii_l2t4_req[26] == 1,16)) && ($0in_rising_edge($0in_delay(l2t4_sii_iq_dequeue,16))) && !(sii_wri_ecc5_l4_cycle15 == sii_l2b4_ecc[5]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc5_l4_wri_cycle15
*/

wire sii_wri_ecc6_l4_cycle15 =  (`TOP.cpu.sii_l2t4_req[0] ^ `TOP.cpu.sii_l2t4_req[1] ^ `TOP.cpu.sii_l2t4_req[2] ^ `TOP.cpu.sii_l2t4_req[4] ^ `TOP.cpu.sii_l2t4_req[5] ^ `TOP.cpu.sii_l2t4_req[7] ^ `TOP.cpu.sii_l2t4_req[10] ^ `TOP.cpu.sii_l2t4_req[11] ^ `TOP.cpu.sii_l2t4_req[12] ^ `TOP.cpu.sii_l2t4_req[14] ^ `TOP.cpu.sii_l2t4_req[17] ^ `TOP.cpu.sii_l2t4_req[18] ^ `TOP.cpu.sii_l2t4_req[21] ^ `TOP.cpu.sii_l2t4_req[23] ^ `TOP.cpu.sii_l2t4_req[24] ^ `TOP.cpu.sii_l2t4_req[26] ^ `TOP.cpu.sii_l2t4_req[27] ^ `TOP.cpu.sii_l2t4_req[29] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t4_req_vld,16))) && ($0in_delay(sii_l2t4_req[24] == 0,16)) && ($0in_delay(sii_l2t4_req[25] == 0,16)) && ($0in_delay(sii_l2t4_req[26] == 1,16)) && ($0in_rising_edge($0in_delay(l2t4_sii_iq_dequeue,16))) && !(sii_wri_ecc6_l4_cycle15 == sii_l2b4_ecc[6]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc6_l4_wri_cycle15
*/

wire sii_wri_ecc0_l4_cycle16 =  (`TOP.cpu.sii_l2t4_req[0] ^ `TOP.cpu.sii_l2t4_req[1] ^ `TOP.cpu.sii_l2t4_req[3] ^ `TOP.cpu.sii_l2t4_req[4] ^ `TOP.cpu.sii_l2t4_req[6] ^ `TOP.cpu.sii_l2t4_req[8] ^ `TOP.cpu.sii_l2t4_req[10] ^ `TOP.cpu.sii_l2t4_req[11] ^ `TOP.cpu.sii_l2t4_req[13] ^ `TOP.cpu.sii_l2t4_req[15] ^ `TOP.cpu.sii_l2t4_req[17] ^ `TOP.cpu.sii_l2t4_req[19] ^ `TOP.cpu.sii_l2t4_req[21] ^ `TOP.cpu.sii_l2t4_req[23] ^ `TOP.cpu.sii_l2t4_req[25] ^ `TOP.cpu.sii_l2t4_req[26] ^ `TOP.cpu.sii_l2t4_req[28] ^ `TOP.cpu.sii_l2t4_req[30] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t4_req_vld,17))) && ($0in_delay(sii_l2t4_req[24] == 0,17)) && ($0in_delay(sii_l2t4_req[25] == 0,17)) && ($0in_delay(sii_l2t4_req[26] == 1,17)) && ($0in_rising_edge($0in_delay(l2t4_sii_iq_dequeue,17))) && !(sii_wri_ecc0_l4_cycle16 == sii_l2b4_ecc[0]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc0_l4_wri_cycle16
*/

wire sii_wri_ecc1_l4_cycle16 =  (`TOP.cpu.sii_l2t4_req[0] ^ `TOP.cpu.sii_l2t4_req[2] ^ `TOP.cpu.sii_l2t4_req[3] ^ `TOP.cpu.sii_l2t4_req[5] ^ `TOP.cpu.sii_l2t4_req[6] ^ `TOP.cpu.sii_l2t4_req[9] ^ `TOP.cpu.sii_l2t4_req[10] ^ `TOP.cpu.sii_l2t4_req[12] ^ `TOP.cpu.sii_l2t4_req[13] ^ `TOP.cpu.sii_l2t4_req[16] ^ `TOP.cpu.sii_l2t4_req[17] ^ `TOP.cpu.sii_l2t4_req[20] ^ `TOP.cpu.sii_l2t4_req[21] ^ `TOP.cpu.sii_l2t4_req[24] ^ `TOP.cpu.sii_l2t4_req[25] ^ `TOP.cpu.sii_l2t4_req[27] ^ `TOP.cpu.sii_l2t4_req[28] ^ `TOP.cpu.sii_l2t4_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t4_req_vld,17))) && ($0in_delay(sii_l2t4_req[24] == 0,17)) && ($0in_delay(sii_l2t4_req[25] == 0,17)) && ($0in_delay(sii_l2t4_req[26] == 1,17)) && ($0in_rising_edge($0in_delay(l2t4_sii_iq_dequeue,17))) && !(sii_wri_ecc1_l4_cycle16 == sii_l2b4_ecc[1]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc1_l4_wri_cycle16
*/

wire sii_wri_ecc2_l4_cycle16 =  (`TOP.cpu.sii_l2t4_req[1] ^ `TOP.cpu.sii_l2t4_req[2] ^ `TOP.cpu.sii_l2t4_req[3] ^ `TOP.cpu.sii_l2t4_req[7] ^ `TOP.cpu.sii_l2t4_req[8] ^ `TOP.cpu.sii_l2t4_req[9] ^ `TOP.cpu.sii_l2t4_req[10] ^ `TOP.cpu.sii_l2t4_req[14] ^ `TOP.cpu.sii_l2t4_req[15] ^ `TOP.cpu.sii_l2t4_req[16] ^ `TOP.cpu.sii_l2t4_req[17] ^ `TOP.cpu.sii_l2t4_req[22] ^ `TOP.cpu.sii_l2t4_req[23] ^ `TOP.cpu.sii_l2t4_req[24] ^ `TOP.cpu.sii_l2t4_req[25] ^ `TOP.cpu.sii_l2t4_req[29] ^ `TOP.cpu.sii_l2t4_req[30] ^ `TOP.cpu.sii_l2t4_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t4_req_vld,17))) && ($0in_delay(sii_l2t4_req[24] == 0,17)) && ($0in_delay(sii_l2t4_req[25] == 0,17)) && ($0in_delay(sii_l2t4_req[26] == 1,17)) && ($0in_rising_edge($0in_delay(l2t4_sii_iq_dequeue,17))) && !(sii_wri_ecc2_l4_cycle16 == sii_l2b4_ecc[2]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc2_l4_wri_cycle16
*/

wire sii_wri_ecc3_l4_cycle16 =  (`TOP.cpu.sii_l2t4_req[4] ^ `TOP.cpu.sii_l2t4_req[5] ^ `TOP.cpu.sii_l2t4_req[6] ^ `TOP.cpu.sii_l2t4_req[7] ^ `TOP.cpu.sii_l2t4_req[8] ^ `TOP.cpu.sii_l2t4_req[9] ^ `TOP.cpu.sii_l2t4_req[10] ^ `TOP.cpu.sii_l2t4_req[18] ^ `TOP.cpu.sii_l2t4_req[19] ^ `TOP.cpu.sii_l2t4_req[20] ^ `TOP.cpu.sii_l2t4_req[21] ^ `TOP.cpu.sii_l2t4_req[22] ^ `TOP.cpu.sii_l2t4_req[23] ^ `TOP.cpu.sii_l2t4_req[24] ^ `TOP.cpu.sii_l2t4_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t4_req_vld,17))) && ($0in_delay(sii_l2t4_req[24] == 0,17)) && ($0in_delay(sii_l2t4_req[25] == 0,17)) && ($0in_delay(sii_l2t4_req[26] == 1,17)) && ($0in_rising_edge($0in_delay(l2t4_sii_iq_dequeue,17))) && !(sii_wri_ecc3_l4_cycle16 == sii_l2b4_ecc[3]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc3_l4_wri_cycle16
*/

wire sii_wri_ecc4_l4_cycle16 =  ( `TOP.cpu.sii_l2t4_req[11] ^ `TOP.cpu.sii_l2t4_req[12] ^ `TOP.cpu.sii_l2t4_req[13] ^ `TOP.cpu.sii_l2t4_req[14] ^ `TOP.cpu.sii_l2t4_req[15] ^ `TOP.cpu.sii_l2t4_req[16] ^ `TOP.cpu.sii_l2t4_req[17] ^ `TOP.cpu.sii_l2t4_req[18] ^ `TOP.cpu.sii_l2t4_req[19] ^ `TOP.cpu.sii_l2t4_req[20] ^ `TOP.cpu.sii_l2t4_req[21] ^ `TOP.cpu.sii_l2t4_req[22] ^ `TOP.cpu.sii_l2t4_req[23] ^ `TOP.cpu.sii_l2t4_req[24] ^ `TOP.cpu.sii_l2t4_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t4_req_vld,17))) && ($0in_delay(sii_l2t4_req[24] == 0,17)) && ($0in_delay(sii_l2t4_req[25] == 0,17)) && ($0in_delay(sii_l2t4_req[26] == 1,17)) && ($0in_rising_edge($0in_delay(l2t4_sii_iq_dequeue,17))) && !(sii_wri_ecc4_l4_cycle16 == sii_l2b4_ecc[4]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc4_l4_wri_cycle16
*/

wire sii_wri_ecc5_l4_cycle16 =  (`TOP.cpu.sii_l2t4_req[26] ^ `TOP.cpu.sii_l2t4_req[27] ^ `TOP.cpu.sii_l2t4_req[28] ^ `TOP.cpu.sii_l2t4_req[29] ^ `TOP.cpu.sii_l2t4_req[30] ^ `TOP.cpu.sii_l2t4_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t4_req_vld,17))) && ($0in_delay(sii_l2t4_req[24] == 0,17)) && ($0in_delay(sii_l2t4_req[25] == 0,17)) && ($0in_delay(sii_l2t4_req[26] == 1,17)) && ($0in_rising_edge($0in_delay(l2t4_sii_iq_dequeue,17))) && !(sii_wri_ecc5_l4_cycle16 == sii_l2b4_ecc[5]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc5_l4_wri_cycle16
*/

wire sii_wri_ecc6_l4_cycle16 =  (`TOP.cpu.sii_l2t4_req[0] ^ `TOP.cpu.sii_l2t4_req[1] ^ `TOP.cpu.sii_l2t4_req[2] ^ `TOP.cpu.sii_l2t4_req[4] ^ `TOP.cpu.sii_l2t4_req[5] ^ `TOP.cpu.sii_l2t4_req[7] ^ `TOP.cpu.sii_l2t4_req[10] ^ `TOP.cpu.sii_l2t4_req[11] ^ `TOP.cpu.sii_l2t4_req[12] ^ `TOP.cpu.sii_l2t4_req[14] ^ `TOP.cpu.sii_l2t4_req[17] ^ `TOP.cpu.sii_l2t4_req[18] ^ `TOP.cpu.sii_l2t4_req[21] ^ `TOP.cpu.sii_l2t4_req[23] ^ `TOP.cpu.sii_l2t4_req[24] ^ `TOP.cpu.sii_l2t4_req[26] ^ `TOP.cpu.sii_l2t4_req[27] ^ `TOP.cpu.sii_l2t4_req[29] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t4_req_vld,17))) && ($0in_delay(sii_l2t4_req[24] == 0,17)) && ($0in_delay(sii_l2t4_req[25] == 0,17)) && ($0in_delay(sii_l2t4_req[26] == 1,17)) && ($0in_rising_edge($0in_delay(l2t4_sii_iq_dequeue,17))) && !(sii_wri_ecc6_l4_cycle16 == sii_l2b4_ecc[6]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc6_l4_wri_cycle16
*/

wire sii_wri_ecc0_l5_cycle1 =  (`TOP.cpu.sii_l2t5_req[0] ^ `TOP.cpu.sii_l2t5_req[1] ^ `TOP.cpu.sii_l2t5_req[3] ^ `TOP.cpu.sii_l2t5_req[4] ^ `TOP.cpu.sii_l2t5_req[6] ^ `TOP.cpu.sii_l2t5_req[8] ^ `TOP.cpu.sii_l2t5_req[10] ^ `TOP.cpu.sii_l2t5_req[11] ^ `TOP.cpu.sii_l2t5_req[13] ^ `TOP.cpu.sii_l2t5_req[15] ^ `TOP.cpu.sii_l2t5_req[17] ^ `TOP.cpu.sii_l2t5_req[19] ^ `TOP.cpu.sii_l2t5_req[21] ^ `TOP.cpu.sii_l2t5_req[23] ^ `TOP.cpu.sii_l2t5_req[25] ^ `TOP.cpu.sii_l2t5_req[26] ^ `TOP.cpu.sii_l2t5_req[28] ^ `TOP.cpu.sii_l2t5_req[30] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t5_req_vld,2))) && ($0in_delay(sii_l2t5_req[24] == 0,2)) && ($0in_delay(sii_l2t5_req[25] == 0,2)) && ($0in_delay(sii_l2t5_req[26] == 1,2)) && ($0in_rising_edge($0in_delay(l2t5_sii_iq_dequeue,2))) && !(sii_wri_ecc0_l5_cycle1 == sii_l2b5_ecc[0]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc0_l5_wri_cycle1
*/

wire sii_wri_ecc1_l5_cycle1 =  (`TOP.cpu.sii_l2t5_req[0] ^ `TOP.cpu.sii_l2t5_req[2] ^ `TOP.cpu.sii_l2t5_req[3] ^ `TOP.cpu.sii_l2t5_req[5] ^ `TOP.cpu.sii_l2t5_req[6] ^ `TOP.cpu.sii_l2t5_req[9] ^ `TOP.cpu.sii_l2t5_req[10] ^ `TOP.cpu.sii_l2t5_req[12] ^ `TOP.cpu.sii_l2t5_req[13] ^ `TOP.cpu.sii_l2t5_req[16] ^ `TOP.cpu.sii_l2t5_req[17] ^ `TOP.cpu.sii_l2t5_req[20] ^ `TOP.cpu.sii_l2t5_req[21] ^ `TOP.cpu.sii_l2t5_req[24] ^ `TOP.cpu.sii_l2t5_req[25] ^ `TOP.cpu.sii_l2t5_req[27] ^ `TOP.cpu.sii_l2t5_req[28] ^ `TOP.cpu.sii_l2t5_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t5_req_vld,2))) && ($0in_delay(sii_l2t5_req[24] == 0,2)) && ($0in_delay(sii_l2t5_req[25] == 0,2)) && ($0in_delay(sii_l2t5_req[26] == 1,2)) && ($0in_rising_edge($0in_delay(l2t5_sii_iq_dequeue,2))) && !(sii_wri_ecc1_l5_cycle1 == sii_l2b5_ecc[1]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc1_l5_wri_cycle1
*/

wire sii_wri_ecc2_l5_cycle1 =  (`TOP.cpu.sii_l2t5_req[1] ^ `TOP.cpu.sii_l2t5_req[2] ^ `TOP.cpu.sii_l2t5_req[3] ^ `TOP.cpu.sii_l2t5_req[7] ^ `TOP.cpu.sii_l2t5_req[8] ^ `TOP.cpu.sii_l2t5_req[9] ^ `TOP.cpu.sii_l2t5_req[10] ^ `TOP.cpu.sii_l2t5_req[14] ^ `TOP.cpu.sii_l2t5_req[15] ^ `TOP.cpu.sii_l2t5_req[16] ^ `TOP.cpu.sii_l2t5_req[17] ^ `TOP.cpu.sii_l2t5_req[22] ^ `TOP.cpu.sii_l2t5_req[23] ^ `TOP.cpu.sii_l2t5_req[24] ^ `TOP.cpu.sii_l2t5_req[25] ^ `TOP.cpu.sii_l2t5_req[29] ^ `TOP.cpu.sii_l2t5_req[30] ^ `TOP.cpu.sii_l2t5_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t5_req_vld,2))) && ($0in_delay(sii_l2t5_req[24] == 0,2)) && ($0in_delay(sii_l2t5_req[25] == 0,2)) && ($0in_delay(sii_l2t5_req[26] == 1,2)) && ($0in_rising_edge($0in_delay(l2t5_sii_iq_dequeue,2))) && !(sii_wri_ecc2_l5_cycle1 == sii_l2b5_ecc[2]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc2_l5_wri_cycle1
*/

wire sii_wri_ecc3_l5_cycle1 =  (`TOP.cpu.sii_l2t5_req[4] ^ `TOP.cpu.sii_l2t5_req[5] ^ `TOP.cpu.sii_l2t5_req[6] ^ `TOP.cpu.sii_l2t5_req[7] ^ `TOP.cpu.sii_l2t5_req[8] ^ `TOP.cpu.sii_l2t5_req[9] ^ `TOP.cpu.sii_l2t5_req[10] ^ `TOP.cpu.sii_l2t5_req[18] ^ `TOP.cpu.sii_l2t5_req[19] ^ `TOP.cpu.sii_l2t5_req[20] ^ `TOP.cpu.sii_l2t5_req[21] ^ `TOP.cpu.sii_l2t5_req[22] ^ `TOP.cpu.sii_l2t5_req[23] ^ `TOP.cpu.sii_l2t5_req[24] ^ `TOP.cpu.sii_l2t5_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t5_req_vld,2))) && ($0in_delay(sii_l2t5_req[24] == 0,2)) && ($0in_delay(sii_l2t5_req[25] == 0,2)) && ($0in_delay(sii_l2t5_req[26] == 1,2)) && ($0in_rising_edge($0in_delay(l2t5_sii_iq_dequeue,2))) && !(sii_wri_ecc3_l5_cycle1 == sii_l2b5_ecc[3]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc3_l5_wri_cycle1
*/

wire sii_wri_ecc4_l5_cycle1 =  ( `TOP.cpu.sii_l2t5_req[11] ^ `TOP.cpu.sii_l2t5_req[12] ^ `TOP.cpu.sii_l2t5_req[13] ^ `TOP.cpu.sii_l2t5_req[14] ^ `TOP.cpu.sii_l2t5_req[15] ^ `TOP.cpu.sii_l2t5_req[16] ^ `TOP.cpu.sii_l2t5_req[17] ^ `TOP.cpu.sii_l2t5_req[18] ^ `TOP.cpu.sii_l2t5_req[19] ^ `TOP.cpu.sii_l2t5_req[20] ^ `TOP.cpu.sii_l2t5_req[21] ^ `TOP.cpu.sii_l2t5_req[22] ^ `TOP.cpu.sii_l2t5_req[23] ^ `TOP.cpu.sii_l2t5_req[24] ^ `TOP.cpu.sii_l2t5_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t5_req_vld,2))) && ($0in_delay(sii_l2t5_req[24] == 0,2)) && ($0in_delay(sii_l2t5_req[25] == 0,2)) && ($0in_delay(sii_l2t5_req[26] == 1,2)) && ($0in_rising_edge($0in_delay(l2t5_sii_iq_dequeue,2))) && !(sii_wri_ecc4_l5_cycle1 == sii_l2b5_ecc[4]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc4_l5_wri_cycle1
*/

wire sii_wri_ecc5_l5_cycle1 =  (`TOP.cpu.sii_l2t5_req[26] ^ `TOP.cpu.sii_l2t5_req[27] ^ `TOP.cpu.sii_l2t5_req[28] ^ `TOP.cpu.sii_l2t5_req[29] ^ `TOP.cpu.sii_l2t5_req[30] ^ `TOP.cpu.sii_l2t5_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t5_req_vld,2))) && ($0in_delay(sii_l2t5_req[24] == 0,2)) && ($0in_delay(sii_l2t5_req[25] == 0,2)) && ($0in_delay(sii_l2t5_req[26] == 1,2)) && ($0in_rising_edge($0in_delay(l2t5_sii_iq_dequeue,2))) && !(sii_wri_ecc5_l5_cycle1 == sii_l2b5_ecc[5]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc5_l5_wri_cycle1
*/

wire sii_wri_ecc6_l5_cycle1 =  (`TOP.cpu.sii_l2t5_req[0] ^ `TOP.cpu.sii_l2t5_req[1] ^ `TOP.cpu.sii_l2t5_req[2] ^ `TOP.cpu.sii_l2t5_req[4] ^ `TOP.cpu.sii_l2t5_req[5] ^ `TOP.cpu.sii_l2t5_req[7] ^ `TOP.cpu.sii_l2t5_req[10] ^ `TOP.cpu.sii_l2t5_req[11] ^ `TOP.cpu.sii_l2t5_req[12] ^ `TOP.cpu.sii_l2t5_req[14] ^ `TOP.cpu.sii_l2t5_req[17] ^ `TOP.cpu.sii_l2t5_req[18] ^ `TOP.cpu.sii_l2t5_req[21] ^ `TOP.cpu.sii_l2t5_req[23] ^ `TOP.cpu.sii_l2t5_req[24] ^ `TOP.cpu.sii_l2t5_req[26] ^ `TOP.cpu.sii_l2t5_req[27] ^ `TOP.cpu.sii_l2t5_req[29] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t5_req_vld,2))) && ($0in_delay(sii_l2t5_req[24] == 0,2)) && ($0in_delay(sii_l2t5_req[25] == 0,2)) && ($0in_delay(sii_l2t5_req[26] == 1,2)) && ($0in_rising_edge($0in_delay(l2t5_sii_iq_dequeue,2))) && !(sii_wri_ecc6_l5_cycle1 == sii_l2b5_ecc[6]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc6_l5_wri_cycle1
*/

wire sii_wri_ecc0_l5_cycle2 =  (`TOP.cpu.sii_l2t5_req[0] ^ `TOP.cpu.sii_l2t5_req[1] ^ `TOP.cpu.sii_l2t5_req[3] ^ `TOP.cpu.sii_l2t5_req[4] ^ `TOP.cpu.sii_l2t5_req[6] ^ `TOP.cpu.sii_l2t5_req[8] ^ `TOP.cpu.sii_l2t5_req[10] ^ `TOP.cpu.sii_l2t5_req[11] ^ `TOP.cpu.sii_l2t5_req[13] ^ `TOP.cpu.sii_l2t5_req[15] ^ `TOP.cpu.sii_l2t5_req[17] ^ `TOP.cpu.sii_l2t5_req[19] ^ `TOP.cpu.sii_l2t5_req[21] ^ `TOP.cpu.sii_l2t5_req[23] ^ `TOP.cpu.sii_l2t5_req[25] ^ `TOP.cpu.sii_l2t5_req[26] ^ `TOP.cpu.sii_l2t5_req[28] ^ `TOP.cpu.sii_l2t5_req[30] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t5_req_vld,3))) && ($0in_delay(sii_l2t5_req[24] == 0,3)) && ($0in_delay(sii_l2t5_req[25] == 0,3)) && ($0in_delay(sii_l2t5_req[26] == 1,3)) && ($0in_rising_edge($0in_delay(l2t5_sii_iq_dequeue,3))) && !(sii_wri_ecc0_l5_cycle2 == sii_l2b5_ecc[0]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc0_l5_wri_cycle2
*/

wire sii_wri_ecc1_l5_cycle2 =  (`TOP.cpu.sii_l2t5_req[0] ^ `TOP.cpu.sii_l2t5_req[2] ^ `TOP.cpu.sii_l2t5_req[3] ^ `TOP.cpu.sii_l2t5_req[5] ^ `TOP.cpu.sii_l2t5_req[6] ^ `TOP.cpu.sii_l2t5_req[9] ^ `TOP.cpu.sii_l2t5_req[10] ^ `TOP.cpu.sii_l2t5_req[12] ^ `TOP.cpu.sii_l2t5_req[13] ^ `TOP.cpu.sii_l2t5_req[16] ^ `TOP.cpu.sii_l2t5_req[17] ^ `TOP.cpu.sii_l2t5_req[20] ^ `TOP.cpu.sii_l2t5_req[21] ^ `TOP.cpu.sii_l2t5_req[24] ^ `TOP.cpu.sii_l2t5_req[25] ^ `TOP.cpu.sii_l2t5_req[27] ^ `TOP.cpu.sii_l2t5_req[28] ^ `TOP.cpu.sii_l2t5_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t5_req_vld,3))) && ($0in_delay(sii_l2t5_req[24] == 0,3)) && ($0in_delay(sii_l2t5_req[25] == 0,3)) && ($0in_delay(sii_l2t5_req[26] == 1,3)) && ($0in_rising_edge($0in_delay(l2t5_sii_iq_dequeue,3))) && !(sii_wri_ecc1_l5_cycle2 == sii_l2b5_ecc[1]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc1_l5_wri_cycle2
*/

wire sii_wri_ecc2_l5_cycle2 =  (`TOP.cpu.sii_l2t5_req[1] ^ `TOP.cpu.sii_l2t5_req[2] ^ `TOP.cpu.sii_l2t5_req[3] ^ `TOP.cpu.sii_l2t5_req[7] ^ `TOP.cpu.sii_l2t5_req[8] ^ `TOP.cpu.sii_l2t5_req[9] ^ `TOP.cpu.sii_l2t5_req[10] ^ `TOP.cpu.sii_l2t5_req[14] ^ `TOP.cpu.sii_l2t5_req[15] ^ `TOP.cpu.sii_l2t5_req[16] ^ `TOP.cpu.sii_l2t5_req[17] ^ `TOP.cpu.sii_l2t5_req[22] ^ `TOP.cpu.sii_l2t5_req[23] ^ `TOP.cpu.sii_l2t5_req[24] ^ `TOP.cpu.sii_l2t5_req[25] ^ `TOP.cpu.sii_l2t5_req[29] ^ `TOP.cpu.sii_l2t5_req[30] ^ `TOP.cpu.sii_l2t5_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t5_req_vld,3))) && ($0in_delay(sii_l2t5_req[24] == 0,3)) && ($0in_delay(sii_l2t5_req[25] == 0,3)) && ($0in_delay(sii_l2t5_req[26] == 1,3)) && ($0in_rising_edge($0in_delay(l2t5_sii_iq_dequeue,3))) && !(sii_wri_ecc2_l5_cycle2 == sii_l2b5_ecc[2]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc2_l5_wri_cycle2
*/

wire sii_wri_ecc3_l5_cycle2 =  (`TOP.cpu.sii_l2t5_req[4] ^ `TOP.cpu.sii_l2t5_req[5] ^ `TOP.cpu.sii_l2t5_req[6] ^ `TOP.cpu.sii_l2t5_req[7] ^ `TOP.cpu.sii_l2t5_req[8] ^ `TOP.cpu.sii_l2t5_req[9] ^ `TOP.cpu.sii_l2t5_req[10] ^ `TOP.cpu.sii_l2t5_req[18] ^ `TOP.cpu.sii_l2t5_req[19] ^ `TOP.cpu.sii_l2t5_req[20] ^ `TOP.cpu.sii_l2t5_req[21] ^ `TOP.cpu.sii_l2t5_req[22] ^ `TOP.cpu.sii_l2t5_req[23] ^ `TOP.cpu.sii_l2t5_req[24] ^ `TOP.cpu.sii_l2t5_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t5_req_vld,3))) && ($0in_delay(sii_l2t5_req[24] == 0,3)) && ($0in_delay(sii_l2t5_req[25] == 0,3)) && ($0in_delay(sii_l2t5_req[26] == 1,3)) && ($0in_rising_edge($0in_delay(l2t5_sii_iq_dequeue,3))) && !(sii_wri_ecc3_l5_cycle2 == sii_l2b5_ecc[3]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc3_l5_wri_cycle2
*/

wire sii_wri_ecc4_l5_cycle2 =  ( `TOP.cpu.sii_l2t5_req[11] ^ `TOP.cpu.sii_l2t5_req[12] ^ `TOP.cpu.sii_l2t5_req[13] ^ `TOP.cpu.sii_l2t5_req[14] ^ `TOP.cpu.sii_l2t5_req[15] ^ `TOP.cpu.sii_l2t5_req[16] ^ `TOP.cpu.sii_l2t5_req[17] ^ `TOP.cpu.sii_l2t5_req[18] ^ `TOP.cpu.sii_l2t5_req[19] ^ `TOP.cpu.sii_l2t5_req[20] ^ `TOP.cpu.sii_l2t5_req[21] ^ `TOP.cpu.sii_l2t5_req[22] ^ `TOP.cpu.sii_l2t5_req[23] ^ `TOP.cpu.sii_l2t5_req[24] ^ `TOP.cpu.sii_l2t5_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t5_req_vld,3))) && ($0in_delay(sii_l2t5_req[24] == 0,3)) && ($0in_delay(sii_l2t5_req[25] == 0,3)) && ($0in_delay(sii_l2t5_req[26] == 1,3)) && ($0in_rising_edge($0in_delay(l2t5_sii_iq_dequeue,3))) && !(sii_wri_ecc4_l5_cycle2 == sii_l2b5_ecc[4]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc4_l5_wri_cycle2
*/

wire sii_wri_ecc5_l5_cycle2 =  (`TOP.cpu.sii_l2t5_req[26] ^ `TOP.cpu.sii_l2t5_req[27] ^ `TOP.cpu.sii_l2t5_req[28] ^ `TOP.cpu.sii_l2t5_req[29] ^ `TOP.cpu.sii_l2t5_req[30] ^ `TOP.cpu.sii_l2t5_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t5_req_vld,3))) && ($0in_delay(sii_l2t5_req[24] == 0,3)) && ($0in_delay(sii_l2t5_req[25] == 0,3)) && ($0in_delay(sii_l2t5_req[26] == 1,3)) && ($0in_rising_edge($0in_delay(l2t5_sii_iq_dequeue,3))) && !(sii_wri_ecc5_l5_cycle2 == sii_l2b5_ecc[5]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc5_l5_wri_cycle2
*/

wire sii_wri_ecc6_l5_cycle2 =  (`TOP.cpu.sii_l2t5_req[0] ^ `TOP.cpu.sii_l2t5_req[1] ^ `TOP.cpu.sii_l2t5_req[2] ^ `TOP.cpu.sii_l2t5_req[4] ^ `TOP.cpu.sii_l2t5_req[5] ^ `TOP.cpu.sii_l2t5_req[7] ^ `TOP.cpu.sii_l2t5_req[10] ^ `TOP.cpu.sii_l2t5_req[11] ^ `TOP.cpu.sii_l2t5_req[12] ^ `TOP.cpu.sii_l2t5_req[14] ^ `TOP.cpu.sii_l2t5_req[17] ^ `TOP.cpu.sii_l2t5_req[18] ^ `TOP.cpu.sii_l2t5_req[21] ^ `TOP.cpu.sii_l2t5_req[23] ^ `TOP.cpu.sii_l2t5_req[24] ^ `TOP.cpu.sii_l2t5_req[26] ^ `TOP.cpu.sii_l2t5_req[27] ^ `TOP.cpu.sii_l2t5_req[29] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t5_req_vld,3))) && ($0in_delay(sii_l2t5_req[24] == 0,3)) && ($0in_delay(sii_l2t5_req[25] == 0,3)) && ($0in_delay(sii_l2t5_req[26] == 1,3)) && ($0in_rising_edge($0in_delay(l2t5_sii_iq_dequeue,3))) && !(sii_wri_ecc6_l5_cycle2 == sii_l2b5_ecc[6]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc6_l5_wri_cycle2
*/

wire sii_wri_ecc0_l5_cycle3 =  (`TOP.cpu.sii_l2t5_req[0] ^ `TOP.cpu.sii_l2t5_req[1] ^ `TOP.cpu.sii_l2t5_req[3] ^ `TOP.cpu.sii_l2t5_req[4] ^ `TOP.cpu.sii_l2t5_req[6] ^ `TOP.cpu.sii_l2t5_req[8] ^ `TOP.cpu.sii_l2t5_req[10] ^ `TOP.cpu.sii_l2t5_req[11] ^ `TOP.cpu.sii_l2t5_req[13] ^ `TOP.cpu.sii_l2t5_req[15] ^ `TOP.cpu.sii_l2t5_req[17] ^ `TOP.cpu.sii_l2t5_req[19] ^ `TOP.cpu.sii_l2t5_req[21] ^ `TOP.cpu.sii_l2t5_req[23] ^ `TOP.cpu.sii_l2t5_req[25] ^ `TOP.cpu.sii_l2t5_req[26] ^ `TOP.cpu.sii_l2t5_req[28] ^ `TOP.cpu.sii_l2t5_req[30] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t5_req_vld,4))) && ($0in_delay(sii_l2t5_req[24] == 0,4)) && ($0in_delay(sii_l2t5_req[25] == 0,4)) && ($0in_delay(sii_l2t5_req[26] == 1,4)) && ($0in_rising_edge($0in_delay(l2t5_sii_iq_dequeue,4))) && !(sii_wri_ecc0_l5_cycle3 == sii_l2b5_ecc[0]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc0_l5_wri_cycle3
*/

wire sii_wri_ecc1_l5_cycle3 =  (`TOP.cpu.sii_l2t5_req[0] ^ `TOP.cpu.sii_l2t5_req[2] ^ `TOP.cpu.sii_l2t5_req[3] ^ `TOP.cpu.sii_l2t5_req[5] ^ `TOP.cpu.sii_l2t5_req[6] ^ `TOP.cpu.sii_l2t5_req[9] ^ `TOP.cpu.sii_l2t5_req[10] ^ `TOP.cpu.sii_l2t5_req[12] ^ `TOP.cpu.sii_l2t5_req[13] ^ `TOP.cpu.sii_l2t5_req[16] ^ `TOP.cpu.sii_l2t5_req[17] ^ `TOP.cpu.sii_l2t5_req[20] ^ `TOP.cpu.sii_l2t5_req[21] ^ `TOP.cpu.sii_l2t5_req[24] ^ `TOP.cpu.sii_l2t5_req[25] ^ `TOP.cpu.sii_l2t5_req[27] ^ `TOP.cpu.sii_l2t5_req[28] ^ `TOP.cpu.sii_l2t5_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t5_req_vld,4))) && ($0in_delay(sii_l2t5_req[24] == 0,4)) && ($0in_delay(sii_l2t5_req[25] == 0,4)) && ($0in_delay(sii_l2t5_req[26] == 1,4)) && ($0in_rising_edge($0in_delay(l2t5_sii_iq_dequeue,4))) && !(sii_wri_ecc1_l5_cycle3 == sii_l2b5_ecc[1]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc1_l5_wri_cycle3
*/

wire sii_wri_ecc2_l5_cycle3 =  (`TOP.cpu.sii_l2t5_req[1] ^ `TOP.cpu.sii_l2t5_req[2] ^ `TOP.cpu.sii_l2t5_req[3] ^ `TOP.cpu.sii_l2t5_req[7] ^ `TOP.cpu.sii_l2t5_req[8] ^ `TOP.cpu.sii_l2t5_req[9] ^ `TOP.cpu.sii_l2t5_req[10] ^ `TOP.cpu.sii_l2t5_req[14] ^ `TOP.cpu.sii_l2t5_req[15] ^ `TOP.cpu.sii_l2t5_req[16] ^ `TOP.cpu.sii_l2t5_req[17] ^ `TOP.cpu.sii_l2t5_req[22] ^ `TOP.cpu.sii_l2t5_req[23] ^ `TOP.cpu.sii_l2t5_req[24] ^ `TOP.cpu.sii_l2t5_req[25] ^ `TOP.cpu.sii_l2t5_req[29] ^ `TOP.cpu.sii_l2t5_req[30] ^ `TOP.cpu.sii_l2t5_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t5_req_vld,4))) && ($0in_delay(sii_l2t5_req[24] == 0,4)) && ($0in_delay(sii_l2t5_req[25] == 0,4)) && ($0in_delay(sii_l2t5_req[26] == 1,4)) && ($0in_rising_edge($0in_delay(l2t5_sii_iq_dequeue,4))) && !(sii_wri_ecc2_l5_cycle3 == sii_l2b5_ecc[2]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc2_l5_wri_cycle3
*/

wire sii_wri_ecc3_l5_cycle3 =  (`TOP.cpu.sii_l2t5_req[4] ^ `TOP.cpu.sii_l2t5_req[5] ^ `TOP.cpu.sii_l2t5_req[6] ^ `TOP.cpu.sii_l2t5_req[7] ^ `TOP.cpu.sii_l2t5_req[8] ^ `TOP.cpu.sii_l2t5_req[9] ^ `TOP.cpu.sii_l2t5_req[10] ^ `TOP.cpu.sii_l2t5_req[18] ^ `TOP.cpu.sii_l2t5_req[19] ^ `TOP.cpu.sii_l2t5_req[20] ^ `TOP.cpu.sii_l2t5_req[21] ^ `TOP.cpu.sii_l2t5_req[22] ^ `TOP.cpu.sii_l2t5_req[23] ^ `TOP.cpu.sii_l2t5_req[24] ^ `TOP.cpu.sii_l2t5_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t5_req_vld,4))) && ($0in_delay(sii_l2t5_req[24] == 0,4)) && ($0in_delay(sii_l2t5_req[25] == 0,4)) && ($0in_delay(sii_l2t5_req[26] == 1,4)) && ($0in_rising_edge($0in_delay(l2t5_sii_iq_dequeue,4))) && !(sii_wri_ecc3_l5_cycle3 == sii_l2b5_ecc[3]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc3_l5_wri_cycle3
*/

wire sii_wri_ecc4_l5_cycle3 =  ( `TOP.cpu.sii_l2t5_req[11] ^ `TOP.cpu.sii_l2t5_req[12] ^ `TOP.cpu.sii_l2t5_req[13] ^ `TOP.cpu.sii_l2t5_req[14] ^ `TOP.cpu.sii_l2t5_req[15] ^ `TOP.cpu.sii_l2t5_req[16] ^ `TOP.cpu.sii_l2t5_req[17] ^ `TOP.cpu.sii_l2t5_req[18] ^ `TOP.cpu.sii_l2t5_req[19] ^ `TOP.cpu.sii_l2t5_req[20] ^ `TOP.cpu.sii_l2t5_req[21] ^ `TOP.cpu.sii_l2t5_req[22] ^ `TOP.cpu.sii_l2t5_req[23] ^ `TOP.cpu.sii_l2t5_req[24] ^ `TOP.cpu.sii_l2t5_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t5_req_vld,4))) && ($0in_delay(sii_l2t5_req[24] == 0,4)) && ($0in_delay(sii_l2t5_req[25] == 0,4)) && ($0in_delay(sii_l2t5_req[26] == 1,4)) && ($0in_rising_edge($0in_delay(l2t5_sii_iq_dequeue,4))) && !(sii_wri_ecc4_l5_cycle3 == sii_l2b5_ecc[4]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc4_l5_wri_cycle3
*/

wire sii_wri_ecc5_l5_cycle3 =  (`TOP.cpu.sii_l2t5_req[26] ^ `TOP.cpu.sii_l2t5_req[27] ^ `TOP.cpu.sii_l2t5_req[28] ^ `TOP.cpu.sii_l2t5_req[29] ^ `TOP.cpu.sii_l2t5_req[30] ^ `TOP.cpu.sii_l2t5_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t5_req_vld,4))) && ($0in_delay(sii_l2t5_req[24] == 0,4)) && ($0in_delay(sii_l2t5_req[25] == 0,4)) && ($0in_delay(sii_l2t5_req[26] == 1,4)) && ($0in_rising_edge($0in_delay(l2t5_sii_iq_dequeue,4))) && !(sii_wri_ecc5_l5_cycle3 == sii_l2b5_ecc[5]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc5_l5_wri_cycle3
*/

wire sii_wri_ecc6_l5_cycle3 =  (`TOP.cpu.sii_l2t5_req[0] ^ `TOP.cpu.sii_l2t5_req[1] ^ `TOP.cpu.sii_l2t5_req[2] ^ `TOP.cpu.sii_l2t5_req[4] ^ `TOP.cpu.sii_l2t5_req[5] ^ `TOP.cpu.sii_l2t5_req[7] ^ `TOP.cpu.sii_l2t5_req[10] ^ `TOP.cpu.sii_l2t5_req[11] ^ `TOP.cpu.sii_l2t5_req[12] ^ `TOP.cpu.sii_l2t5_req[14] ^ `TOP.cpu.sii_l2t5_req[17] ^ `TOP.cpu.sii_l2t5_req[18] ^ `TOP.cpu.sii_l2t5_req[21] ^ `TOP.cpu.sii_l2t5_req[23] ^ `TOP.cpu.sii_l2t5_req[24] ^ `TOP.cpu.sii_l2t5_req[26] ^ `TOP.cpu.sii_l2t5_req[27] ^ `TOP.cpu.sii_l2t5_req[29] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t5_req_vld,4))) && ($0in_delay(sii_l2t5_req[24] == 0,4)) && ($0in_delay(sii_l2t5_req[25] == 0,2)) && ($0in_delay(sii_l2t5_req[26] == 1,4)) && ($0in_rising_edge($0in_delay(l2t5_sii_iq_dequeue,4))) && !(sii_wri_ecc6_l5_cycle3 == sii_l2b5_ecc[6]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc6_l5_wri_cycle3
*/

wire sii_wri_ecc0_l5_cycle4 =  (`TOP.cpu.sii_l2t5_req[0] ^ `TOP.cpu.sii_l2t5_req[1] ^ `TOP.cpu.sii_l2t5_req[3] ^ `TOP.cpu.sii_l2t5_req[4] ^ `TOP.cpu.sii_l2t5_req[6] ^ `TOP.cpu.sii_l2t5_req[8] ^ `TOP.cpu.sii_l2t5_req[10] ^ `TOP.cpu.sii_l2t5_req[11] ^ `TOP.cpu.sii_l2t5_req[13] ^ `TOP.cpu.sii_l2t5_req[15] ^ `TOP.cpu.sii_l2t5_req[17] ^ `TOP.cpu.sii_l2t5_req[19] ^ `TOP.cpu.sii_l2t5_req[21] ^ `TOP.cpu.sii_l2t5_req[23] ^ `TOP.cpu.sii_l2t5_req[25] ^ `TOP.cpu.sii_l2t5_req[26] ^ `TOP.cpu.sii_l2t5_req[28] ^ `TOP.cpu.sii_l2t5_req[30] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t5_req_vld,5))) && ($0in_delay(sii_l2t5_req[24] == 0,5)) && ($0in_delay(sii_l2t5_req[25] == 0,5)) && ($0in_delay(sii_l2t5_req[26] == 1,5)) && ($0in_rising_edge($0in_delay(l2t5_sii_iq_dequeue,5))) && !(sii_wri_ecc0_l5_cycle4 == sii_l2b5_ecc[0]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc0_l5_wri_cycle4
*/

wire sii_wri_ecc1_l5_cycle4 =  (`TOP.cpu.sii_l2t5_req[0] ^ `TOP.cpu.sii_l2t5_req[2] ^ `TOP.cpu.sii_l2t5_req[3] ^ `TOP.cpu.sii_l2t5_req[5] ^ `TOP.cpu.sii_l2t5_req[6] ^ `TOP.cpu.sii_l2t5_req[9] ^ `TOP.cpu.sii_l2t5_req[10] ^ `TOP.cpu.sii_l2t5_req[12] ^ `TOP.cpu.sii_l2t5_req[13] ^ `TOP.cpu.sii_l2t5_req[16] ^ `TOP.cpu.sii_l2t5_req[17] ^ `TOP.cpu.sii_l2t5_req[20] ^ `TOP.cpu.sii_l2t5_req[21] ^ `TOP.cpu.sii_l2t5_req[24] ^ `TOP.cpu.sii_l2t5_req[25] ^ `TOP.cpu.sii_l2t5_req[27] ^ `TOP.cpu.sii_l2t5_req[28] ^ `TOP.cpu.sii_l2t5_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t5_req_vld,5))) && ($0in_delay(sii_l2t5_req[24] == 0,5)) && ($0in_delay(sii_l2t5_req[25] == 0,5)) && ($0in_delay(sii_l2t5_req[26] == 1,5)) && ($0in_rising_edge($0in_delay(l2t5_sii_iq_dequeue,5))) && !(sii_wri_ecc1_l5_cycle4 == sii_l2b5_ecc[1]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc1_l5_wri_cycle4
*/

wire sii_wri_ecc2_l5_cycle4 =  (`TOP.cpu.sii_l2t5_req[1] ^ `TOP.cpu.sii_l2t5_req[2] ^ `TOP.cpu.sii_l2t5_req[3] ^ `TOP.cpu.sii_l2t5_req[7] ^ `TOP.cpu.sii_l2t5_req[8] ^ `TOP.cpu.sii_l2t5_req[9] ^ `TOP.cpu.sii_l2t5_req[10] ^ `TOP.cpu.sii_l2t5_req[14] ^ `TOP.cpu.sii_l2t5_req[15] ^ `TOP.cpu.sii_l2t5_req[16] ^ `TOP.cpu.sii_l2t5_req[17] ^ `TOP.cpu.sii_l2t5_req[22] ^ `TOP.cpu.sii_l2t5_req[23] ^ `TOP.cpu.sii_l2t5_req[24] ^ `TOP.cpu.sii_l2t5_req[25] ^ `TOP.cpu.sii_l2t5_req[29] ^ `TOP.cpu.sii_l2t5_req[30] ^ `TOP.cpu.sii_l2t5_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t5_req_vld,5))) && ($0in_delay(sii_l2t5_req[24] == 0,5)) && ($0in_delay(sii_l2t5_req[25] == 0,5)) && ($0in_delay(sii_l2t5_req[26] == 1,5)) && ($0in_rising_edge($0in_delay(l2t5_sii_iq_dequeue,5))) && !(sii_wri_ecc2_l5_cycle4 == sii_l2b5_ecc[2]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc2_l5_wri_cycle4
*/

wire sii_wri_ecc3_l5_cycle4 =  (`TOP.cpu.sii_l2t5_req[4] ^ `TOP.cpu.sii_l2t5_req[5] ^ `TOP.cpu.sii_l2t5_req[6] ^ `TOP.cpu.sii_l2t5_req[7] ^ `TOP.cpu.sii_l2t5_req[8] ^ `TOP.cpu.sii_l2t5_req[9] ^ `TOP.cpu.sii_l2t5_req[10] ^ `TOP.cpu.sii_l2t5_req[18] ^ `TOP.cpu.sii_l2t5_req[19] ^ `TOP.cpu.sii_l2t5_req[20] ^ `TOP.cpu.sii_l2t5_req[21] ^ `TOP.cpu.sii_l2t5_req[22] ^ `TOP.cpu.sii_l2t5_req[23] ^ `TOP.cpu.sii_l2t5_req[24] ^ `TOP.cpu.sii_l2t5_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t5_req_vld,5))) && ($0in_delay(sii_l2t5_req[24] == 0,5)) && ($0in_delay(sii_l2t5_req[25] == 0,5)) && ($0in_delay(sii_l2t5_req[26] == 1,5)) && ($0in_rising_edge($0in_delay(l2t5_sii_iq_dequeue,5))) && !(sii_wri_ecc3_l5_cycle4 == sii_l2b5_ecc[3]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc3_l5_wri_cycle4
*/

wire sii_wri_ecc4_l5_cycle4 =  ( `TOP.cpu.sii_l2t5_req[11] ^ `TOP.cpu.sii_l2t5_req[12] ^ `TOP.cpu.sii_l2t5_req[13] ^ `TOP.cpu.sii_l2t5_req[14] ^ `TOP.cpu.sii_l2t5_req[15] ^ `TOP.cpu.sii_l2t5_req[16] ^ `TOP.cpu.sii_l2t5_req[17] ^ `TOP.cpu.sii_l2t5_req[18] ^ `TOP.cpu.sii_l2t5_req[19] ^ `TOP.cpu.sii_l2t5_req[20] ^ `TOP.cpu.sii_l2t5_req[21] ^ `TOP.cpu.sii_l2t5_req[22] ^ `TOP.cpu.sii_l2t5_req[23] ^ `TOP.cpu.sii_l2t5_req[24] ^ `TOP.cpu.sii_l2t5_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t5_req_vld,5))) && ($0in_delay(sii_l2t5_req[24] == 0,5)) && ($0in_delay(sii_l2t5_req[25] == 0,5)) && ($0in_delay(sii_l2t5_req[26] == 1,5)) && ($0in_rising_edge($0in_delay(l2t5_sii_iq_dequeue,5))) && !(sii_wri_ecc4_l5_cycle4 == sii_l2b5_ecc[4]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc4_l5_wri_cycle4
*/

wire sii_wri_ecc5_l5_cycle4 =  (`TOP.cpu.sii_l2t5_req[26] ^ `TOP.cpu.sii_l2t5_req[27] ^ `TOP.cpu.sii_l2t5_req[28] ^ `TOP.cpu.sii_l2t5_req[29] ^ `TOP.cpu.sii_l2t5_req[30] ^ `TOP.cpu.sii_l2t5_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t5_req_vld,5))) && ($0in_delay(sii_l2t5_req[24] == 0,5)) && ($0in_delay(sii_l2t5_req[25] == 0,5)) && ($0in_delay(sii_l2t5_req[26] == 1,5)) && ($0in_rising_edge($0in_delay(l2t5_sii_iq_dequeue,5))) && !(sii_wri_ecc5_l5_cycle4 == sii_l2b5_ecc[5]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc5_l5_wri_cycle4
*/

wire sii_wri_ecc6_l5_cycle4 =  (`TOP.cpu.sii_l2t5_req[0] ^ `TOP.cpu.sii_l2t5_req[1] ^ `TOP.cpu.sii_l2t5_req[2] ^ `TOP.cpu.sii_l2t5_req[4] ^ `TOP.cpu.sii_l2t5_req[5] ^ `TOP.cpu.sii_l2t5_req[7] ^ `TOP.cpu.sii_l2t5_req[10] ^ `TOP.cpu.sii_l2t5_req[11] ^ `TOP.cpu.sii_l2t5_req[12] ^ `TOP.cpu.sii_l2t5_req[14] ^ `TOP.cpu.sii_l2t5_req[17] ^ `TOP.cpu.sii_l2t5_req[18] ^ `TOP.cpu.sii_l2t5_req[21] ^ `TOP.cpu.sii_l2t5_req[23] ^ `TOP.cpu.sii_l2t5_req[24] ^ `TOP.cpu.sii_l2t5_req[26] ^ `TOP.cpu.sii_l2t5_req[27] ^ `TOP.cpu.sii_l2t5_req[29] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t5_req_vld,5))) && ($0in_delay(sii_l2t5_req[24] == 0,5)) && ($0in_delay(sii_l2t5_req[25] == 0,5)) && ($0in_delay(sii_l2t5_req[26] == 1,5)) && ($0in_rising_edge($0in_delay(l2t5_sii_iq_dequeue,5))) && !(sii_wri_ecc6_l5_cycle4 == sii_l2b5_ecc[6]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc6_l5_wri_cycle4
*/

wire sii_wri_ecc0_l5_cycle5 =  (`TOP.cpu.sii_l2t5_req[0] ^ `TOP.cpu.sii_l2t5_req[1] ^ `TOP.cpu.sii_l2t5_req[3] ^ `TOP.cpu.sii_l2t5_req[4] ^ `TOP.cpu.sii_l2t5_req[6] ^ `TOP.cpu.sii_l2t5_req[8] ^ `TOP.cpu.sii_l2t5_req[10] ^ `TOP.cpu.sii_l2t5_req[11] ^ `TOP.cpu.sii_l2t5_req[13] ^ `TOP.cpu.sii_l2t5_req[15] ^ `TOP.cpu.sii_l2t5_req[17] ^ `TOP.cpu.sii_l2t5_req[19] ^ `TOP.cpu.sii_l2t5_req[21] ^ `TOP.cpu.sii_l2t5_req[23] ^ `TOP.cpu.sii_l2t5_req[25] ^ `TOP.cpu.sii_l2t5_req[26] ^ `TOP.cpu.sii_l2t5_req[28] ^ `TOP.cpu.sii_l2t5_req[30] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t5_req_vld,6))) && ($0in_delay(sii_l2t5_req[24] == 0,6)) && ($0in_delay(sii_l2t5_req[25] == 0,6)) && ($0in_delay(sii_l2t5_req[26] == 1,6)) && ($0in_rising_edge($0in_delay(l2t5_sii_iq_dequeue,6))) && !(sii_wri_ecc0_l5_cycle5 == sii_l2b5_ecc[0]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc0_l5_wri_cycle5
*/

wire sii_wri_ecc1_l5_cycle5 =  (`TOP.cpu.sii_l2t5_req[0] ^ `TOP.cpu.sii_l2t5_req[2] ^ `TOP.cpu.sii_l2t5_req[3] ^ `TOP.cpu.sii_l2t5_req[5] ^ `TOP.cpu.sii_l2t5_req[6] ^ `TOP.cpu.sii_l2t5_req[9] ^ `TOP.cpu.sii_l2t5_req[10] ^ `TOP.cpu.sii_l2t5_req[12] ^ `TOP.cpu.sii_l2t5_req[13] ^ `TOP.cpu.sii_l2t5_req[16] ^ `TOP.cpu.sii_l2t5_req[17] ^ `TOP.cpu.sii_l2t5_req[20] ^ `TOP.cpu.sii_l2t5_req[21] ^ `TOP.cpu.sii_l2t5_req[24] ^ `TOP.cpu.sii_l2t5_req[25] ^ `TOP.cpu.sii_l2t5_req[27] ^ `TOP.cpu.sii_l2t5_req[28] ^ `TOP.cpu.sii_l2t5_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t5_req_vld,6))) && ($0in_delay(sii_l2t5_req[24] == 0,6)) && ($0in_delay(sii_l2t5_req[25] == 0,6)) && ($0in_delay(sii_l2t5_req[26] == 1,6)) && ($0in_rising_edge($0in_delay(l2t5_sii_iq_dequeue,6))) && !(sii_wri_ecc1_l5_cycle5 == sii_l2b5_ecc[1]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc1_l5_wri_cycle5
*/

wire sii_wri_ecc2_l5_cycle5 =  (`TOP.cpu.sii_l2t5_req[1] ^ `TOP.cpu.sii_l2t5_req[2] ^ `TOP.cpu.sii_l2t5_req[3] ^ `TOP.cpu.sii_l2t5_req[7] ^ `TOP.cpu.sii_l2t5_req[8] ^ `TOP.cpu.sii_l2t5_req[9] ^ `TOP.cpu.sii_l2t5_req[10] ^ `TOP.cpu.sii_l2t5_req[14] ^ `TOP.cpu.sii_l2t5_req[15] ^ `TOP.cpu.sii_l2t5_req[16] ^ `TOP.cpu.sii_l2t5_req[17] ^ `TOP.cpu.sii_l2t5_req[22] ^ `TOP.cpu.sii_l2t5_req[23] ^ `TOP.cpu.sii_l2t5_req[24] ^ `TOP.cpu.sii_l2t5_req[25] ^ `TOP.cpu.sii_l2t5_req[29] ^ `TOP.cpu.sii_l2t5_req[30] ^ `TOP.cpu.sii_l2t5_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t5_req_vld,6))) && ($0in_delay(sii_l2t5_req[24] == 0,6)) && ($0in_delay(sii_l2t5_req[25] == 0,6)) && ($0in_delay(sii_l2t5_req[26] == 1,6)) && ($0in_rising_edge($0in_delay(l2t5_sii_iq_dequeue,6))) && !(sii_wri_ecc2_l5_cycle5 == sii_l2b5_ecc[2]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc2_l5_wri_cycle5
*/

wire sii_wri_ecc3_l5_cycle5 =  (`TOP.cpu.sii_l2t5_req[4] ^ `TOP.cpu.sii_l2t5_req[5] ^ `TOP.cpu.sii_l2t5_req[6] ^ `TOP.cpu.sii_l2t5_req[7] ^ `TOP.cpu.sii_l2t5_req[8] ^ `TOP.cpu.sii_l2t5_req[9] ^ `TOP.cpu.sii_l2t5_req[10] ^ `TOP.cpu.sii_l2t5_req[18] ^ `TOP.cpu.sii_l2t5_req[19] ^ `TOP.cpu.sii_l2t5_req[20] ^ `TOP.cpu.sii_l2t5_req[21] ^ `TOP.cpu.sii_l2t5_req[22] ^ `TOP.cpu.sii_l2t5_req[23] ^ `TOP.cpu.sii_l2t5_req[24] ^ `TOP.cpu.sii_l2t5_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t5_req_vld,6))) && ($0in_delay(sii_l2t5_req[24] == 0,6)) && ($0in_delay(sii_l2t5_req[25] == 0,6)) && ($0in_delay(sii_l2t5_req[26] == 1,6)) && ($0in_rising_edge($0in_delay(l2t5_sii_iq_dequeue,6))) && !(sii_wri_ecc3_l5_cycle5 == sii_l2b5_ecc[3]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc3_l5_wri_cycle5
*/

wire sii_wri_ecc4_l5_cycle5 =  ( `TOP.cpu.sii_l2t5_req[11] ^ `TOP.cpu.sii_l2t5_req[12] ^ `TOP.cpu.sii_l2t5_req[13] ^ `TOP.cpu.sii_l2t5_req[14] ^ `TOP.cpu.sii_l2t5_req[15] ^ `TOP.cpu.sii_l2t5_req[16] ^ `TOP.cpu.sii_l2t5_req[17] ^ `TOP.cpu.sii_l2t5_req[18] ^ `TOP.cpu.sii_l2t5_req[19] ^ `TOP.cpu.sii_l2t5_req[20] ^ `TOP.cpu.sii_l2t5_req[21] ^ `TOP.cpu.sii_l2t5_req[22] ^ `TOP.cpu.sii_l2t5_req[23] ^ `TOP.cpu.sii_l2t5_req[24] ^ `TOP.cpu.sii_l2t5_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t5_req_vld,6))) && ($0in_delay(sii_l2t5_req[24] == 0,6)) && ($0in_delay(sii_l2t5_req[25] == 0,6)) && ($0in_delay(sii_l2t5_req[26] == 1,6)) && ($0in_rising_edge($0in_delay(l2t5_sii_iq_dequeue,6))) && !(sii_wri_ecc4_l5_cycle5 == sii_l2b5_ecc[4]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc4_l5_wri_cycle5
*/

wire sii_wri_ecc5_l5_cycle5 =  (`TOP.cpu.sii_l2t5_req[26] ^ `TOP.cpu.sii_l2t5_req[27] ^ `TOP.cpu.sii_l2t5_req[28] ^ `TOP.cpu.sii_l2t5_req[29] ^ `TOP.cpu.sii_l2t5_req[30] ^ `TOP.cpu.sii_l2t5_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t5_req_vld,6))) && ($0in_delay(sii_l2t5_req[24] == 0,6)) && ($0in_delay(sii_l2t5_req[25] == 0,2)) && ($0in_delay(sii_l2t5_req[26] == 1,6)) && ($0in_rising_edge($0in_delay(l2t5_sii_iq_dequeue,6))) && !(sii_wri_ecc5_l5_cycle5 == sii_l2b5_ecc[5]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc5_l5_wri_cycle5
*/

wire sii_wri_ecc6_l5_cycle5 =  (`TOP.cpu.sii_l2t5_req[0] ^ `TOP.cpu.sii_l2t5_req[1] ^ `TOP.cpu.sii_l2t5_req[2] ^ `TOP.cpu.sii_l2t5_req[4] ^ `TOP.cpu.sii_l2t5_req[5] ^ `TOP.cpu.sii_l2t5_req[7] ^ `TOP.cpu.sii_l2t5_req[10] ^ `TOP.cpu.sii_l2t5_req[11] ^ `TOP.cpu.sii_l2t5_req[12] ^ `TOP.cpu.sii_l2t5_req[14] ^ `TOP.cpu.sii_l2t5_req[17] ^ `TOP.cpu.sii_l2t5_req[18] ^ `TOP.cpu.sii_l2t5_req[21] ^ `TOP.cpu.sii_l2t5_req[23] ^ `TOP.cpu.sii_l2t5_req[24] ^ `TOP.cpu.sii_l2t5_req[26] ^ `TOP.cpu.sii_l2t5_req[27] ^ `TOP.cpu.sii_l2t5_req[29] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t5_req_vld,6))) && ($0in_delay(sii_l2t5_req[24] == 0,6)) && ($0in_delay(sii_l2t5_req[25] == 0,6)) && ($0in_delay(sii_l2t5_req[26] == 1,6)) && ($0in_rising_edge($0in_delay(l2t5_sii_iq_dequeue,6))) && !(sii_wri_ecc6_l5_cycle5 == sii_l2b5_ecc[6]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc6_l5_wri_cycle5
*/

wire sii_wri_ecc0_l5_cycle6 =  (`TOP.cpu.sii_l2t5_req[0] ^ `TOP.cpu.sii_l2t5_req[1] ^ `TOP.cpu.sii_l2t5_req[3] ^ `TOP.cpu.sii_l2t5_req[4] ^ `TOP.cpu.sii_l2t5_req[6] ^ `TOP.cpu.sii_l2t5_req[8] ^ `TOP.cpu.sii_l2t5_req[10] ^ `TOP.cpu.sii_l2t5_req[11] ^ `TOP.cpu.sii_l2t5_req[13] ^ `TOP.cpu.sii_l2t5_req[15] ^ `TOP.cpu.sii_l2t5_req[17] ^ `TOP.cpu.sii_l2t5_req[19] ^ `TOP.cpu.sii_l2t5_req[21] ^ `TOP.cpu.sii_l2t5_req[23] ^ `TOP.cpu.sii_l2t5_req[25] ^ `TOP.cpu.sii_l2t5_req[26] ^ `TOP.cpu.sii_l2t5_req[28] ^ `TOP.cpu.sii_l2t5_req[30] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t5_req_vld,7))) && ($0in_delay(sii_l2t5_req[24] == 0,7)) && ($0in_delay(sii_l2t5_req[25] == 0,7)) && ($0in_delay(sii_l2t5_req[26] == 1,7)) && ($0in_rising_edge($0in_delay(l2t5_sii_iq_dequeue,7))) && !(sii_wri_ecc0_l5_cycle6 == sii_l2b5_ecc[0]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc0_l5_wri_cycle6
*/

wire sii_wri_ecc1_l5_cycle6 =  (`TOP.cpu.sii_l2t5_req[0] ^ `TOP.cpu.sii_l2t5_req[2] ^ `TOP.cpu.sii_l2t5_req[3] ^ `TOP.cpu.sii_l2t5_req[5] ^ `TOP.cpu.sii_l2t5_req[6] ^ `TOP.cpu.sii_l2t5_req[9] ^ `TOP.cpu.sii_l2t5_req[10] ^ `TOP.cpu.sii_l2t5_req[12] ^ `TOP.cpu.sii_l2t5_req[13] ^ `TOP.cpu.sii_l2t5_req[16] ^ `TOP.cpu.sii_l2t5_req[17] ^ `TOP.cpu.sii_l2t5_req[20] ^ `TOP.cpu.sii_l2t5_req[21] ^ `TOP.cpu.sii_l2t5_req[24] ^ `TOP.cpu.sii_l2t5_req[25] ^ `TOP.cpu.sii_l2t5_req[27] ^ `TOP.cpu.sii_l2t5_req[28] ^ `TOP.cpu.sii_l2t5_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t5_req_vld,7))) && ($0in_delay(sii_l2t5_req[24] == 0,7)) && ($0in_delay(sii_l2t5_req[25] == 0,7)) && ($0in_delay(sii_l2t5_req[26] == 1,7)) && ($0in_rising_edge($0in_delay(l2t5_sii_iq_dequeue,7))) && !(sii_wri_ecc1_l5_cycle6 == sii_l2b5_ecc[1]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc1_l5_wri_cycle6
*/

wire sii_wri_ecc2_l5_cycle6 =  (`TOP.cpu.sii_l2t5_req[1] ^ `TOP.cpu.sii_l2t5_req[2] ^ `TOP.cpu.sii_l2t5_req[3] ^ `TOP.cpu.sii_l2t5_req[7] ^ `TOP.cpu.sii_l2t5_req[8] ^ `TOP.cpu.sii_l2t5_req[9] ^ `TOP.cpu.sii_l2t5_req[10] ^ `TOP.cpu.sii_l2t5_req[14] ^ `TOP.cpu.sii_l2t5_req[15] ^ `TOP.cpu.sii_l2t5_req[16] ^ `TOP.cpu.sii_l2t5_req[17] ^ `TOP.cpu.sii_l2t5_req[22] ^ `TOP.cpu.sii_l2t5_req[23] ^ `TOP.cpu.sii_l2t5_req[24] ^ `TOP.cpu.sii_l2t5_req[25] ^ `TOP.cpu.sii_l2t5_req[29] ^ `TOP.cpu.sii_l2t5_req[30] ^ `TOP.cpu.sii_l2t5_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t5_req_vld,7))) && ($0in_delay(sii_l2t5_req[24] == 0,7)) && ($0in_delay(sii_l2t5_req[25] == 0,7)) && ($0in_delay(sii_l2t5_req[26] == 1,7)) && ($0in_rising_edge($0in_delay(l2t5_sii_iq_dequeue,7))) && !(sii_wri_ecc2_l5_cycle6 == sii_l2b5_ecc[2]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc2_l5_wri_cycle6
*/

wire sii_wri_ecc3_l5_cycle6 =  (`TOP.cpu.sii_l2t5_req[4] ^ `TOP.cpu.sii_l2t5_req[5] ^ `TOP.cpu.sii_l2t5_req[6] ^ `TOP.cpu.sii_l2t5_req[7] ^ `TOP.cpu.sii_l2t5_req[8] ^ `TOP.cpu.sii_l2t5_req[9] ^ `TOP.cpu.sii_l2t5_req[10] ^ `TOP.cpu.sii_l2t5_req[18] ^ `TOP.cpu.sii_l2t5_req[19] ^ `TOP.cpu.sii_l2t5_req[20] ^ `TOP.cpu.sii_l2t5_req[21] ^ `TOP.cpu.sii_l2t5_req[22] ^ `TOP.cpu.sii_l2t5_req[23] ^ `TOP.cpu.sii_l2t5_req[24] ^ `TOP.cpu.sii_l2t5_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t5_req_vld,7))) && ($0in_delay(sii_l2t5_req[24] == 0,7)) && ($0in_delay(sii_l2t5_req[25] == 0,7)) && ($0in_delay(sii_l2t5_req[26] == 1,7)) && ($0in_rising_edge($0in_delay(l2t5_sii_iq_dequeue,7))) && !(sii_wri_ecc3_l5_cycle6 == sii_l2b5_ecc[3]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc3_l5_wri_cycle6
*/

wire sii_wri_ecc4_l5_cycle6 =  ( `TOP.cpu.sii_l2t5_req[11] ^ `TOP.cpu.sii_l2t5_req[12] ^ `TOP.cpu.sii_l2t5_req[13] ^ `TOP.cpu.sii_l2t5_req[14] ^ `TOP.cpu.sii_l2t5_req[15] ^ `TOP.cpu.sii_l2t5_req[16] ^ `TOP.cpu.sii_l2t5_req[17] ^ `TOP.cpu.sii_l2t5_req[18] ^ `TOP.cpu.sii_l2t5_req[19] ^ `TOP.cpu.sii_l2t5_req[20] ^ `TOP.cpu.sii_l2t5_req[21] ^ `TOP.cpu.sii_l2t5_req[22] ^ `TOP.cpu.sii_l2t5_req[23] ^ `TOP.cpu.sii_l2t5_req[24] ^ `TOP.cpu.sii_l2t5_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t5_req_vld,7))) && ($0in_delay(sii_l2t5_req[24] == 0,7)) && ($0in_delay(sii_l2t5_req[25] == 0,7)) && ($0in_delay(sii_l2t5_req[26] == 1,7)) && ($0in_rising_edge($0in_delay(l2t5_sii_iq_dequeue,7))) && !(sii_wri_ecc4_l5_cycle6 == sii_l2b5_ecc[4]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc4_l5_wri_cycle6
*/

wire sii_wri_ecc5_l5_cycle6 =  (`TOP.cpu.sii_l2t5_req[26] ^ `TOP.cpu.sii_l2t5_req[27] ^ `TOP.cpu.sii_l2t5_req[28] ^ `TOP.cpu.sii_l2t5_req[29] ^ `TOP.cpu.sii_l2t5_req[30] ^ `TOP.cpu.sii_l2t5_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t5_req_vld,7))) && ($0in_delay(sii_l2t5_req[24] == 0,7)) && ($0in_delay(sii_l2t5_req[25] == 0,7)) && ($0in_delay(sii_l2t5_req[26] == 1,7)) && ($0in_rising_edge($0in_delay(l2t5_sii_iq_dequeue,7))) && !(sii_wri_ecc5_l5_cycle6 == sii_l2b5_ecc[5]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc5_l5_wri_cycle6
*/

wire sii_wri_ecc6_l5_cycle6 =  (`TOP.cpu.sii_l2t5_req[0] ^ `TOP.cpu.sii_l2t5_req[1] ^ `TOP.cpu.sii_l2t5_req[2] ^ `TOP.cpu.sii_l2t5_req[4] ^ `TOP.cpu.sii_l2t5_req[5] ^ `TOP.cpu.sii_l2t5_req[7] ^ `TOP.cpu.sii_l2t5_req[10] ^ `TOP.cpu.sii_l2t5_req[11] ^ `TOP.cpu.sii_l2t5_req[12] ^ `TOP.cpu.sii_l2t5_req[14] ^ `TOP.cpu.sii_l2t5_req[17] ^ `TOP.cpu.sii_l2t5_req[18] ^ `TOP.cpu.sii_l2t5_req[21] ^ `TOP.cpu.sii_l2t5_req[23] ^ `TOP.cpu.sii_l2t5_req[24] ^ `TOP.cpu.sii_l2t5_req[26] ^ `TOP.cpu.sii_l2t5_req[27] ^ `TOP.cpu.sii_l2t5_req[29] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t5_req_vld,7))) && ($0in_delay(sii_l2t5_req[24] == 0,7)) && ($0in_delay(sii_l2t5_req[25] == 0,7)) && ($0in_delay(sii_l2t5_req[26] == 1,7)) && ($0in_rising_edge($0in_delay(l2t5_sii_iq_dequeue,7))) && !(sii_wri_ecc6_l5_cycle6 == sii_l2b5_ecc[6]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc6_l5_wri_cycle6
*/

wire sii_wri_ecc0_l5_cycle7 =  (`TOP.cpu.sii_l2t5_req[0] ^ `TOP.cpu.sii_l2t5_req[1] ^ `TOP.cpu.sii_l2t5_req[3] ^ `TOP.cpu.sii_l2t5_req[4] ^ `TOP.cpu.sii_l2t5_req[6] ^ `TOP.cpu.sii_l2t5_req[8] ^ `TOP.cpu.sii_l2t5_req[10] ^ `TOP.cpu.sii_l2t5_req[11] ^ `TOP.cpu.sii_l2t5_req[13] ^ `TOP.cpu.sii_l2t5_req[15] ^ `TOP.cpu.sii_l2t5_req[17] ^ `TOP.cpu.sii_l2t5_req[19] ^ `TOP.cpu.sii_l2t5_req[21] ^ `TOP.cpu.sii_l2t5_req[23] ^ `TOP.cpu.sii_l2t5_req[25] ^ `TOP.cpu.sii_l2t5_req[26] ^ `TOP.cpu.sii_l2t5_req[28] ^ `TOP.cpu.sii_l2t5_req[30] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t5_req_vld,8))) && ($0in_delay(sii_l2t5_req[24] == 0,8)) && ($0in_delay(sii_l2t5_req[25] == 0,8)) && ($0in_delay(sii_l2t5_req[26] == 1,8)) && ($0in_rising_edge($0in_delay(l2t5_sii_iq_dequeue,8))) && !(sii_wri_ecc0_l5_cycle7 == sii_l2b5_ecc[0]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc0_l5_wri_cycle7
*/

wire sii_wri_ecc1_l5_cycle7 =  (`TOP.cpu.sii_l2t5_req[0] ^ `TOP.cpu.sii_l2t5_req[2] ^ `TOP.cpu.sii_l2t5_req[3] ^ `TOP.cpu.sii_l2t5_req[5] ^ `TOP.cpu.sii_l2t5_req[6] ^ `TOP.cpu.sii_l2t5_req[9] ^ `TOP.cpu.sii_l2t5_req[10] ^ `TOP.cpu.sii_l2t5_req[12] ^ `TOP.cpu.sii_l2t5_req[13] ^ `TOP.cpu.sii_l2t5_req[16] ^ `TOP.cpu.sii_l2t5_req[17] ^ `TOP.cpu.sii_l2t5_req[20] ^ `TOP.cpu.sii_l2t5_req[21] ^ `TOP.cpu.sii_l2t5_req[24] ^ `TOP.cpu.sii_l2t5_req[25] ^ `TOP.cpu.sii_l2t5_req[27] ^ `TOP.cpu.sii_l2t5_req[28] ^ `TOP.cpu.sii_l2t5_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t5_req_vld,8))) && ($0in_delay(sii_l2t5_req[24] == 0,8)) && ($0in_delay(sii_l2t5_req[25] == 0,8)) && ($0in_delay(sii_l2t5_req[26] == 1,8)) && ($0in_rising_edge($0in_delay(l2t5_sii_iq_dequeue,8))) && !(sii_wri_ecc1_l5_cycle7 == sii_l2b5_ecc[1]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc1_l5_wri_cycle7
*/

wire sii_wri_ecc2_l5_cycle7 =  (`TOP.cpu.sii_l2t5_req[1] ^ `TOP.cpu.sii_l2t5_req[2] ^ `TOP.cpu.sii_l2t5_req[3] ^ `TOP.cpu.sii_l2t5_req[7] ^ `TOP.cpu.sii_l2t5_req[8] ^ `TOP.cpu.sii_l2t5_req[9] ^ `TOP.cpu.sii_l2t5_req[10] ^ `TOP.cpu.sii_l2t5_req[14] ^ `TOP.cpu.sii_l2t5_req[15] ^ `TOP.cpu.sii_l2t5_req[16] ^ `TOP.cpu.sii_l2t5_req[17] ^ `TOP.cpu.sii_l2t5_req[22] ^ `TOP.cpu.sii_l2t5_req[23] ^ `TOP.cpu.sii_l2t5_req[24] ^ `TOP.cpu.sii_l2t5_req[25] ^ `TOP.cpu.sii_l2t5_req[29] ^ `TOP.cpu.sii_l2t5_req[30] ^ `TOP.cpu.sii_l2t5_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t5_req_vld,8))) && ($0in_delay(sii_l2t5_req[24] == 0,8)) && ($0in_delay(sii_l2t5_req[25] == 0,8)) && ($0in_delay(sii_l2t5_req[26] == 1,8)) && ($0in_rising_edge($0in_delay(l2t5_sii_iq_dequeue,8))) && !(sii_wri_ecc2_l5_cycle7 == sii_l2b5_ecc[2]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc2_l5_wri_cycle7
*/

wire sii_wri_ecc3_l5_cycle7 =  (`TOP.cpu.sii_l2t5_req[4] ^ `TOP.cpu.sii_l2t5_req[5] ^ `TOP.cpu.sii_l2t5_req[6] ^ `TOP.cpu.sii_l2t5_req[7] ^ `TOP.cpu.sii_l2t5_req[8] ^ `TOP.cpu.sii_l2t5_req[9] ^ `TOP.cpu.sii_l2t5_req[10] ^ `TOP.cpu.sii_l2t5_req[18] ^ `TOP.cpu.sii_l2t5_req[19] ^ `TOP.cpu.sii_l2t5_req[20] ^ `TOP.cpu.sii_l2t5_req[21] ^ `TOP.cpu.sii_l2t5_req[22] ^ `TOP.cpu.sii_l2t5_req[23] ^ `TOP.cpu.sii_l2t5_req[24] ^ `TOP.cpu.sii_l2t5_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t5_req_vld,8))) && ($0in_delay(sii_l2t5_req[24] == 0,8)) && ($0in_delay(sii_l2t5_req[25] == 0,8)) && ($0in_delay(sii_l2t5_req[26] == 1,8)) && ($0in_rising_edge($0in_delay(l2t5_sii_iq_dequeue,8))) && !(sii_wri_ecc3_l5_cycle7 == sii_l2b5_ecc[3]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc3_l5_wri_cycle7
*/

wire sii_wri_ecc4_l5_cycle7 =  ( `TOP.cpu.sii_l2t5_req[11] ^ `TOP.cpu.sii_l2t5_req[12] ^ `TOP.cpu.sii_l2t5_req[13] ^ `TOP.cpu.sii_l2t5_req[14] ^ `TOP.cpu.sii_l2t5_req[15] ^ `TOP.cpu.sii_l2t5_req[16] ^ `TOP.cpu.sii_l2t5_req[17] ^ `TOP.cpu.sii_l2t5_req[18] ^ `TOP.cpu.sii_l2t5_req[19] ^ `TOP.cpu.sii_l2t5_req[20] ^ `TOP.cpu.sii_l2t5_req[21] ^ `TOP.cpu.sii_l2t5_req[22] ^ `TOP.cpu.sii_l2t5_req[23] ^ `TOP.cpu.sii_l2t5_req[24] ^ `TOP.cpu.sii_l2t5_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t5_req_vld,8))) && ($0in_delay(sii_l2t5_req[24] == 0,8)) && ($0in_delay(sii_l2t5_req[25] == 0,8)) && ($0in_delay(sii_l2t5_req[26] == 1,8)) && ($0in_rising_edge($0in_delay(l2t5_sii_iq_dequeue,8))) && !(sii_wri_ecc4_l5_cycle7 == sii_l2b5_ecc[4]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc4_l5_wri_cycle7
*/

wire sii_wri_ecc5_l5_cycle7 =  (`TOP.cpu.sii_l2t5_req[26] ^ `TOP.cpu.sii_l2t5_req[27] ^ `TOP.cpu.sii_l2t5_req[28] ^ `TOP.cpu.sii_l2t5_req[29] ^ `TOP.cpu.sii_l2t5_req[30] ^ `TOP.cpu.sii_l2t5_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t5_req_vld,8))) && ($0in_delay(sii_l2t5_req[24] == 0,8)) && ($0in_delay(sii_l2t5_req[25] == 0,8)) && ($0in_delay(sii_l2t5_req[26] == 1,8)) && ($0in_rising_edge($0in_delay(l2t5_sii_iq_dequeue,8))) && !(sii_wri_ecc5_l5_cycle7 == sii_l2b5_ecc[5]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc5_l5_wri_cycle7
*/

wire sii_wri_ecc6_l5_cycle7 =  (`TOP.cpu.sii_l2t5_req[0] ^ `TOP.cpu.sii_l2t5_req[1] ^ `TOP.cpu.sii_l2t5_req[2] ^ `TOP.cpu.sii_l2t5_req[4] ^ `TOP.cpu.sii_l2t5_req[5] ^ `TOP.cpu.sii_l2t5_req[7] ^ `TOP.cpu.sii_l2t5_req[10] ^ `TOP.cpu.sii_l2t5_req[11] ^ `TOP.cpu.sii_l2t5_req[12] ^ `TOP.cpu.sii_l2t5_req[14] ^ `TOP.cpu.sii_l2t5_req[17] ^ `TOP.cpu.sii_l2t5_req[18] ^ `TOP.cpu.sii_l2t5_req[21] ^ `TOP.cpu.sii_l2t5_req[23] ^ `TOP.cpu.sii_l2t5_req[24] ^ `TOP.cpu.sii_l2t5_req[26] ^ `TOP.cpu.sii_l2t5_req[27] ^ `TOP.cpu.sii_l2t5_req[29] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t5_req_vld,8))) && ($0in_delay(sii_l2t5_req[24] == 0,8)) && ($0in_delay(sii_l2t5_req[25] == 0,8)) && ($0in_delay(sii_l2t5_req[26] == 1,8)) && ($0in_rising_edge($0in_delay(l2t5_sii_iq_dequeue,8))) && !(sii_wri_ecc6_l5_cycle7 == sii_l2b5_ecc[6]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc6_l5_wri_cycle7
*/

wire sii_wri_ecc0_l5_cycle8 =  (`TOP.cpu.sii_l2t5_req[0] ^ `TOP.cpu.sii_l2t5_req[1] ^ `TOP.cpu.sii_l2t5_req[3] ^ `TOP.cpu.sii_l2t5_req[4] ^ `TOP.cpu.sii_l2t5_req[6] ^ `TOP.cpu.sii_l2t5_req[8] ^ `TOP.cpu.sii_l2t5_req[10] ^ `TOP.cpu.sii_l2t5_req[11] ^ `TOP.cpu.sii_l2t5_req[13] ^ `TOP.cpu.sii_l2t5_req[15] ^ `TOP.cpu.sii_l2t5_req[17] ^ `TOP.cpu.sii_l2t5_req[19] ^ `TOP.cpu.sii_l2t5_req[21] ^ `TOP.cpu.sii_l2t5_req[23] ^ `TOP.cpu.sii_l2t5_req[25] ^ `TOP.cpu.sii_l2t5_req[26] ^ `TOP.cpu.sii_l2t5_req[28] ^ `TOP.cpu.sii_l2t5_req[30] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t5_req_vld,9))) && ($0in_delay(sii_l2t5_req[24] == 0,9)) && ($0in_delay(sii_l2t5_req[25] == 0,9)) && ($0in_delay(sii_l2t5_req[26] == 1,9)) && ($0in_rising_edge($0in_delay(l2t5_sii_iq_dequeue,9))) && !(sii_wri_ecc0_l5_cycle8 == sii_l2b5_ecc[0]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc0_l5_wri_cycle8
*/

wire sii_wri_ecc1_l5_cycle8 =  (`TOP.cpu.sii_l2t5_req[0] ^ `TOP.cpu.sii_l2t5_req[2] ^ `TOP.cpu.sii_l2t5_req[3] ^ `TOP.cpu.sii_l2t5_req[5] ^ `TOP.cpu.sii_l2t5_req[6] ^ `TOP.cpu.sii_l2t5_req[9] ^ `TOP.cpu.sii_l2t5_req[10] ^ `TOP.cpu.sii_l2t5_req[12] ^ `TOP.cpu.sii_l2t5_req[13] ^ `TOP.cpu.sii_l2t5_req[16] ^ `TOP.cpu.sii_l2t5_req[17] ^ `TOP.cpu.sii_l2t5_req[20] ^ `TOP.cpu.sii_l2t5_req[21] ^ `TOP.cpu.sii_l2t5_req[24] ^ `TOP.cpu.sii_l2t5_req[25] ^ `TOP.cpu.sii_l2t5_req[27] ^ `TOP.cpu.sii_l2t5_req[28] ^ `TOP.cpu.sii_l2t5_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t5_req_vld,9))) && ($0in_delay(sii_l2t5_req[24] == 0,9)) && ($0in_delay(sii_l2t5_req[25] == 0,9)) && ($0in_delay(sii_l2t5_req[26] == 1,9)) && ($0in_rising_edge($0in_delay(l2t5_sii_iq_dequeue,9))) && !(sii_wri_ecc1_l5_cycle8 == sii_l2b5_ecc[1]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc1_l5_wri_cycle8
*/

wire sii_wri_ecc2_l5_cycle8 =  (`TOP.cpu.sii_l2t5_req[1] ^ `TOP.cpu.sii_l2t5_req[2] ^ `TOP.cpu.sii_l2t5_req[3] ^ `TOP.cpu.sii_l2t5_req[7] ^ `TOP.cpu.sii_l2t5_req[8] ^ `TOP.cpu.sii_l2t5_req[9] ^ `TOP.cpu.sii_l2t5_req[10] ^ `TOP.cpu.sii_l2t5_req[14] ^ `TOP.cpu.sii_l2t5_req[15] ^ `TOP.cpu.sii_l2t5_req[16] ^ `TOP.cpu.sii_l2t5_req[17] ^ `TOP.cpu.sii_l2t5_req[22] ^ `TOP.cpu.sii_l2t5_req[23] ^ `TOP.cpu.sii_l2t5_req[24] ^ `TOP.cpu.sii_l2t5_req[25] ^ `TOP.cpu.sii_l2t5_req[29] ^ `TOP.cpu.sii_l2t5_req[30] ^ `TOP.cpu.sii_l2t5_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t5_req_vld,9))) && ($0in_delay(sii_l2t5_req[24] == 0,9)) && ($0in_delay(sii_l2t5_req[25] == 0,9)) && ($0in_delay(sii_l2t5_req[26] == 1,9)) && ($0in_rising_edge($0in_delay(l2t5_sii_iq_dequeue,9))) && !(sii_wri_ecc2_l5_cycle8 == sii_l2b5_ecc[2]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc2_l5_wri_cycle8
*/

wire sii_wri_ecc3_l5_cycle8 =  (`TOP.cpu.sii_l2t5_req[4] ^ `TOP.cpu.sii_l2t5_req[5] ^ `TOP.cpu.sii_l2t5_req[6] ^ `TOP.cpu.sii_l2t5_req[7] ^ `TOP.cpu.sii_l2t5_req[8] ^ `TOP.cpu.sii_l2t5_req[9] ^ `TOP.cpu.sii_l2t5_req[10] ^ `TOP.cpu.sii_l2t5_req[18] ^ `TOP.cpu.sii_l2t5_req[19] ^ `TOP.cpu.sii_l2t5_req[20] ^ `TOP.cpu.sii_l2t5_req[21] ^ `TOP.cpu.sii_l2t5_req[22] ^ `TOP.cpu.sii_l2t5_req[23] ^ `TOP.cpu.sii_l2t5_req[24] ^ `TOP.cpu.sii_l2t5_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t5_req_vld,9))) && ($0in_delay(sii_l2t5_req[24] == 0,9)) && ($0in_delay(sii_l2t5_req[25] == 0,9)) && ($0in_delay(sii_l2t5_req[26] == 1,9)) && ($0in_rising_edge($0in_delay(l2t5_sii_iq_dequeue,9))) && !(sii_wri_ecc3_l5_cycle8 == sii_l2b5_ecc[3]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc3_l5_wri_cycle8
*/

wire sii_wri_ecc4_l5_cycle8 =  ( `TOP.cpu.sii_l2t5_req[11] ^ `TOP.cpu.sii_l2t5_req[12] ^ `TOP.cpu.sii_l2t5_req[13] ^ `TOP.cpu.sii_l2t5_req[14] ^ `TOP.cpu.sii_l2t5_req[15] ^ `TOP.cpu.sii_l2t5_req[16] ^ `TOP.cpu.sii_l2t5_req[17] ^ `TOP.cpu.sii_l2t5_req[18] ^ `TOP.cpu.sii_l2t5_req[19] ^ `TOP.cpu.sii_l2t5_req[20] ^ `TOP.cpu.sii_l2t5_req[21] ^ `TOP.cpu.sii_l2t5_req[22] ^ `TOP.cpu.sii_l2t5_req[23] ^ `TOP.cpu.sii_l2t5_req[24] ^ `TOP.cpu.sii_l2t5_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t5_req_vld,9))) && ($0in_delay(sii_l2t5_req[24] == 0,9)) && ($0in_delay(sii_l2t5_req[25] == 0,9)) && ($0in_delay(sii_l2t5_req[26] == 1,9)) && ($0in_rising_edge($0in_delay(l2t5_sii_iq_dequeue,9))) && !(sii_wri_ecc4_l5_cycle8 == sii_l2b5_ecc[4]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc4_l5_wri_cycle8
*/

wire sii_wri_ecc5_l5_cycle8 =  (`TOP.cpu.sii_l2t5_req[26] ^ `TOP.cpu.sii_l2t5_req[27] ^ `TOP.cpu.sii_l2t5_req[28] ^ `TOP.cpu.sii_l2t5_req[29] ^ `TOP.cpu.sii_l2t5_req[30] ^ `TOP.cpu.sii_l2t5_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t5_req_vld,9))) && ($0in_delay(sii_l2t5_req[24] == 0,9)) && ($0in_delay(sii_l2t5_req[25] == 0,9)) && ($0in_delay(sii_l2t5_req[26] == 1,9)) && ($0in_rising_edge($0in_delay(l2t5_sii_iq_dequeue,9))) && !(sii_wri_ecc5_l5_cycle8 == sii_l2b5_ecc[5]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc5_l5_wri_cycle8
*/

wire sii_wri_ecc6_l5_cycle8 =  (`TOP.cpu.sii_l2t5_req[0] ^ `TOP.cpu.sii_l2t5_req[1] ^ `TOP.cpu.sii_l2t5_req[2] ^ `TOP.cpu.sii_l2t5_req[4] ^ `TOP.cpu.sii_l2t5_req[5] ^ `TOP.cpu.sii_l2t5_req[7] ^ `TOP.cpu.sii_l2t5_req[10] ^ `TOP.cpu.sii_l2t5_req[11] ^ `TOP.cpu.sii_l2t5_req[12] ^ `TOP.cpu.sii_l2t5_req[14] ^ `TOP.cpu.sii_l2t5_req[17] ^ `TOP.cpu.sii_l2t5_req[18] ^ `TOP.cpu.sii_l2t5_req[21] ^ `TOP.cpu.sii_l2t5_req[23] ^ `TOP.cpu.sii_l2t5_req[24] ^ `TOP.cpu.sii_l2t5_req[26] ^ `TOP.cpu.sii_l2t5_req[27] ^ `TOP.cpu.sii_l2t5_req[29] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t5_req_vld,9))) && ($0in_delay(sii_l2t5_req[24] == 0,9)) && ($0in_delay(sii_l2t5_req[25] == 0,9)) && ($0in_delay(sii_l2t5_req[26] == 1,9)) && ($0in_rising_edge($0in_delay(l2t5_sii_iq_dequeue,9))) && !(sii_wri_ecc6_l5_cycle8 == sii_l2b5_ecc[6]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc6_l5_wri_cycle8
*/

wire sii_wri_ecc0_l5_cycle9 =  (`TOP.cpu.sii_l2t5_req[0] ^ `TOP.cpu.sii_l2t5_req[1] ^ `TOP.cpu.sii_l2t5_req[3] ^ `TOP.cpu.sii_l2t5_req[4] ^ `TOP.cpu.sii_l2t5_req[6] ^ `TOP.cpu.sii_l2t5_req[8] ^ `TOP.cpu.sii_l2t5_req[10] ^ `TOP.cpu.sii_l2t5_req[11] ^ `TOP.cpu.sii_l2t5_req[13] ^ `TOP.cpu.sii_l2t5_req[15] ^ `TOP.cpu.sii_l2t5_req[17] ^ `TOP.cpu.sii_l2t5_req[19] ^ `TOP.cpu.sii_l2t5_req[21] ^ `TOP.cpu.sii_l2t5_req[23] ^ `TOP.cpu.sii_l2t5_req[25] ^ `TOP.cpu.sii_l2t5_req[26] ^ `TOP.cpu.sii_l2t5_req[28] ^ `TOP.cpu.sii_l2t5_req[30] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t5_req_vld,10))) && ($0in_delay(sii_l2t5_req[24] == 0,10)) && ($0in_delay(sii_l2t5_req[25] == 0,10)) && ($0in_delay(sii_l2t5_req[26] == 1,10)) && ($0in_rising_edge($0in_delay(l2t5_sii_iq_dequeue,10))) && !(sii_wri_ecc0_l5_cycle9 == sii_l2b5_ecc[0]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc0_l5_wri_cycle9
*/

wire sii_wri_ecc1_l5_cycle9 =  (`TOP.cpu.sii_l2t5_req[0] ^ `TOP.cpu.sii_l2t5_req[2] ^ `TOP.cpu.sii_l2t5_req[3] ^ `TOP.cpu.sii_l2t5_req[5] ^ `TOP.cpu.sii_l2t5_req[6] ^ `TOP.cpu.sii_l2t5_req[9] ^ `TOP.cpu.sii_l2t5_req[10] ^ `TOP.cpu.sii_l2t5_req[12] ^ `TOP.cpu.sii_l2t5_req[13] ^ `TOP.cpu.sii_l2t5_req[16] ^ `TOP.cpu.sii_l2t5_req[17] ^ `TOP.cpu.sii_l2t5_req[20] ^ `TOP.cpu.sii_l2t5_req[21] ^ `TOP.cpu.sii_l2t5_req[24] ^ `TOP.cpu.sii_l2t5_req[25] ^ `TOP.cpu.sii_l2t5_req[27] ^ `TOP.cpu.sii_l2t5_req[28] ^ `TOP.cpu.sii_l2t5_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t5_req_vld,10))) && ($0in_delay(sii_l2t5_req[24] == 0,10)) && ($0in_delay(sii_l2t5_req[25] == 0,10)) && ($0in_delay(sii_l2t5_req[26] == 1,10)) && ($0in_rising_edge($0in_delay(l2t5_sii_iq_dequeue,10))) && !(sii_wri_ecc1_l5_cycle9 == sii_l2b5_ecc[1]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc1_l5_wri_cycle9
*/

wire sii_wri_ecc2_l5_cycle9 =  (`TOP.cpu.sii_l2t5_req[1] ^ `TOP.cpu.sii_l2t5_req[2] ^ `TOP.cpu.sii_l2t5_req[3] ^ `TOP.cpu.sii_l2t5_req[7] ^ `TOP.cpu.sii_l2t5_req[8] ^ `TOP.cpu.sii_l2t5_req[9] ^ `TOP.cpu.sii_l2t5_req[10] ^ `TOP.cpu.sii_l2t5_req[14] ^ `TOP.cpu.sii_l2t5_req[15] ^ `TOP.cpu.sii_l2t5_req[16] ^ `TOP.cpu.sii_l2t5_req[17] ^ `TOP.cpu.sii_l2t5_req[22] ^ `TOP.cpu.sii_l2t5_req[23] ^ `TOP.cpu.sii_l2t5_req[24] ^ `TOP.cpu.sii_l2t5_req[25] ^ `TOP.cpu.sii_l2t5_req[29] ^ `TOP.cpu.sii_l2t5_req[30] ^ `TOP.cpu.sii_l2t5_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t5_req_vld,10))) && ($0in_delay(sii_l2t5_req[24] == 0,10)) && ($0in_delay(sii_l2t5_req[25] == 0,10)) && ($0in_delay(sii_l2t5_req[26] == 1,10)) && ($0in_rising_edge($0in_delay(l2t5_sii_iq_dequeue,10))) && !(sii_wri_ecc2_l5_cycle9 == sii_l2b5_ecc[2]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc2_l5_wri_cycle9
*/

wire sii_wri_ecc3_l5_cycle9 =  (`TOP.cpu.sii_l2t5_req[4] ^ `TOP.cpu.sii_l2t5_req[5] ^ `TOP.cpu.sii_l2t5_req[6] ^ `TOP.cpu.sii_l2t5_req[7] ^ `TOP.cpu.sii_l2t5_req[8] ^ `TOP.cpu.sii_l2t5_req[9] ^ `TOP.cpu.sii_l2t5_req[10] ^ `TOP.cpu.sii_l2t5_req[18] ^ `TOP.cpu.sii_l2t5_req[19] ^ `TOP.cpu.sii_l2t5_req[20] ^ `TOP.cpu.sii_l2t5_req[21] ^ `TOP.cpu.sii_l2t5_req[22] ^ `TOP.cpu.sii_l2t5_req[23] ^ `TOP.cpu.sii_l2t5_req[24] ^ `TOP.cpu.sii_l2t5_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t5_req_vld,10))) && ($0in_delay(sii_l2t5_req[24] == 0,10)) && ($0in_delay(sii_l2t5_req[25] == 0,10)) && ($0in_delay(sii_l2t5_req[26] == 1,10)) && ($0in_rising_edge($0in_delay(l2t5_sii_iq_dequeue,10))) && !(sii_wri_ecc3_l5_cycle9 == sii_l2b5_ecc[3]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc3_l5_wri_cycle9
*/

wire sii_wri_ecc4_l5_cycle9 =  ( `TOP.cpu.sii_l2t5_req[11] ^ `TOP.cpu.sii_l2t5_req[12] ^ `TOP.cpu.sii_l2t5_req[13] ^ `TOP.cpu.sii_l2t5_req[14] ^ `TOP.cpu.sii_l2t5_req[15] ^ `TOP.cpu.sii_l2t5_req[16] ^ `TOP.cpu.sii_l2t5_req[17] ^ `TOP.cpu.sii_l2t5_req[18] ^ `TOP.cpu.sii_l2t5_req[19] ^ `TOP.cpu.sii_l2t5_req[20] ^ `TOP.cpu.sii_l2t5_req[21] ^ `TOP.cpu.sii_l2t5_req[22] ^ `TOP.cpu.sii_l2t5_req[23] ^ `TOP.cpu.sii_l2t5_req[24] ^ `TOP.cpu.sii_l2t5_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t5_req_vld,10))) && ($0in_delay(sii_l2t5_req[24] == 0,10)) && ($0in_delay(sii_l2t5_req[25] == 0,10)) && ($0in_delay(sii_l2t5_req[26] == 1,10)) && ($0in_rising_edge($0in_delay(l2t5_sii_iq_dequeue,10))) && !(sii_wri_ecc4_l5_cycle9 == sii_l2b5_ecc[4]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc4_l5_wri_cycle9
*/

wire sii_wri_ecc5_l5_cycle9 =  (`TOP.cpu.sii_l2t5_req[26] ^ `TOP.cpu.sii_l2t5_req[27] ^ `TOP.cpu.sii_l2t5_req[28] ^ `TOP.cpu.sii_l2t5_req[29] ^ `TOP.cpu.sii_l2t5_req[30] ^ `TOP.cpu.sii_l2t5_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t5_req_vld,10))) && ($0in_delay(sii_l2t5_req[24] == 0,10)) && ($0in_delay(sii_l2t5_req[25] == 0,10)) && ($0in_delay(sii_l2t5_req[26] == 1,10)) && ($0in_rising_edge($0in_delay(l2t5_sii_iq_dequeue,10))) && !(sii_wri_ecc5_l5_cycle9 == sii_l2b5_ecc[5]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc5_l5_wri_cycle9
*/

wire sii_wri_ecc6_l5_cycle9 =  (`TOP.cpu.sii_l2t5_req[0] ^ `TOP.cpu.sii_l2t5_req[1] ^ `TOP.cpu.sii_l2t5_req[2] ^ `TOP.cpu.sii_l2t5_req[4] ^ `TOP.cpu.sii_l2t5_req[5] ^ `TOP.cpu.sii_l2t5_req[7] ^ `TOP.cpu.sii_l2t5_req[10] ^ `TOP.cpu.sii_l2t5_req[11] ^ `TOP.cpu.sii_l2t5_req[12] ^ `TOP.cpu.sii_l2t5_req[14] ^ `TOP.cpu.sii_l2t5_req[17] ^ `TOP.cpu.sii_l2t5_req[18] ^ `TOP.cpu.sii_l2t5_req[21] ^ `TOP.cpu.sii_l2t5_req[23] ^ `TOP.cpu.sii_l2t5_req[24] ^ `TOP.cpu.sii_l2t5_req[26] ^ `TOP.cpu.sii_l2t5_req[27] ^ `TOP.cpu.sii_l2t5_req[29] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t5_req_vld,10))) && ($0in_delay(sii_l2t5_req[24] == 0,10)) && ($0in_delay(sii_l2t5_req[25] == 0,10)) && ($0in_delay(sii_l2t5_req[26] == 1,10)) && ($0in_rising_edge($0in_delay(l2t5_sii_iq_dequeue,10))) && !(sii_wri_ecc6_l5_cycle9 == sii_l2b5_ecc[6]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc6_l5_wri_cycle9
*/

wire sii_wri_ecc0_l5_cycle10 =  (`TOP.cpu.sii_l2t5_req[0] ^ `TOP.cpu.sii_l2t5_req[1] ^ `TOP.cpu.sii_l2t5_req[3] ^ `TOP.cpu.sii_l2t5_req[4] ^ `TOP.cpu.sii_l2t5_req[6] ^ `TOP.cpu.sii_l2t5_req[8] ^ `TOP.cpu.sii_l2t5_req[10] ^ `TOP.cpu.sii_l2t5_req[11] ^ `TOP.cpu.sii_l2t5_req[13] ^ `TOP.cpu.sii_l2t5_req[15] ^ `TOP.cpu.sii_l2t5_req[17] ^ `TOP.cpu.sii_l2t5_req[19] ^ `TOP.cpu.sii_l2t5_req[21] ^ `TOP.cpu.sii_l2t5_req[23] ^ `TOP.cpu.sii_l2t5_req[25] ^ `TOP.cpu.sii_l2t5_req[26] ^ `TOP.cpu.sii_l2t5_req[28] ^ `TOP.cpu.sii_l2t5_req[30] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t5_req_vld,11))) && ($0in_delay(sii_l2t5_req[24] == 0,11)) && ($0in_delay(sii_l2t5_req[25] == 0,11)) && ($0in_delay(sii_l2t5_req[26] == 1,11)) && ($0in_rising_edge($0in_delay(l2t5_sii_iq_dequeue,11))) && !(sii_wri_ecc0_l5_cycle10 == sii_l2b5_ecc[0]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc0_l5_wri_cycle10
*/

wire sii_wri_ecc1_l5_cycle10 =  (`TOP.cpu.sii_l2t5_req[0] ^ `TOP.cpu.sii_l2t5_req[2] ^ `TOP.cpu.sii_l2t5_req[3] ^ `TOP.cpu.sii_l2t5_req[5] ^ `TOP.cpu.sii_l2t5_req[6] ^ `TOP.cpu.sii_l2t5_req[9] ^ `TOP.cpu.sii_l2t5_req[10] ^ `TOP.cpu.sii_l2t5_req[12] ^ `TOP.cpu.sii_l2t5_req[13] ^ `TOP.cpu.sii_l2t5_req[16] ^ `TOP.cpu.sii_l2t5_req[17] ^ `TOP.cpu.sii_l2t5_req[20] ^ `TOP.cpu.sii_l2t5_req[21] ^ `TOP.cpu.sii_l2t5_req[24] ^ `TOP.cpu.sii_l2t5_req[25] ^ `TOP.cpu.sii_l2t5_req[27] ^ `TOP.cpu.sii_l2t5_req[28] ^ `TOP.cpu.sii_l2t5_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t5_req_vld,11))) && ($0in_delay(sii_l2t5_req[24] == 0,11)) && ($0in_delay(sii_l2t5_req[25] == 0,11)) && ($0in_delay(sii_l2t5_req[26] == 1,11)) && ($0in_rising_edge($0in_delay(l2t5_sii_iq_dequeue,11))) && !(sii_wri_ecc1_l5_cycle10 == sii_l2b5_ecc[1]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc1_l5_wri_cycle10
*/

wire sii_wri_ecc2_l5_cycle10 =  (`TOP.cpu.sii_l2t5_req[1] ^ `TOP.cpu.sii_l2t5_req[2] ^ `TOP.cpu.sii_l2t5_req[3] ^ `TOP.cpu.sii_l2t5_req[7] ^ `TOP.cpu.sii_l2t5_req[8] ^ `TOP.cpu.sii_l2t5_req[9] ^ `TOP.cpu.sii_l2t5_req[10] ^ `TOP.cpu.sii_l2t5_req[14] ^ `TOP.cpu.sii_l2t5_req[15] ^ `TOP.cpu.sii_l2t5_req[16] ^ `TOP.cpu.sii_l2t5_req[17] ^ `TOP.cpu.sii_l2t5_req[22] ^ `TOP.cpu.sii_l2t5_req[23] ^ `TOP.cpu.sii_l2t5_req[24] ^ `TOP.cpu.sii_l2t5_req[25] ^ `TOP.cpu.sii_l2t5_req[29] ^ `TOP.cpu.sii_l2t5_req[30] ^ `TOP.cpu.sii_l2t5_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t5_req_vld,11))) && ($0in_delay(sii_l2t5_req[24] == 0,11)) && ($0in_delay(sii_l2t5_req[25] == 0,11)) && ($0in_delay(sii_l2t5_req[26] == 1,11)) && ($0in_rising_edge($0in_delay(l2t5_sii_iq_dequeue,11))) && !(sii_wri_ecc2_l5_cycle10 == sii_l2b5_ecc[2]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc2_l5_wri_cycle10
*/

wire sii_wri_ecc3_l5_cycle10 =  (`TOP.cpu.sii_l2t5_req[4] ^ `TOP.cpu.sii_l2t5_req[5] ^ `TOP.cpu.sii_l2t5_req[6] ^ `TOP.cpu.sii_l2t5_req[7] ^ `TOP.cpu.sii_l2t5_req[8] ^ `TOP.cpu.sii_l2t5_req[9] ^ `TOP.cpu.sii_l2t5_req[10] ^ `TOP.cpu.sii_l2t5_req[18] ^ `TOP.cpu.sii_l2t5_req[19] ^ `TOP.cpu.sii_l2t5_req[20] ^ `TOP.cpu.sii_l2t5_req[21] ^ `TOP.cpu.sii_l2t5_req[22] ^ `TOP.cpu.sii_l2t5_req[23] ^ `TOP.cpu.sii_l2t5_req[24] ^ `TOP.cpu.sii_l2t5_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t5_req_vld,11))) && ($0in_delay(sii_l2t5_req[24] == 0,11)) && ($0in_delay(sii_l2t5_req[25] == 0,11)) && ($0in_delay(sii_l2t5_req[26] == 1,11)) && ($0in_rising_edge($0in_delay(l2t5_sii_iq_dequeue,11))) && !(sii_wri_ecc3_l5_cycle10 == sii_l2b5_ecc[3]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc3_l5_wri_cycle10
*/

wire sii_wri_ecc4_l5_cycle10 =  ( `TOP.cpu.sii_l2t5_req[11] ^ `TOP.cpu.sii_l2t5_req[12] ^ `TOP.cpu.sii_l2t5_req[13] ^ `TOP.cpu.sii_l2t5_req[14] ^ `TOP.cpu.sii_l2t5_req[15] ^ `TOP.cpu.sii_l2t5_req[16] ^ `TOP.cpu.sii_l2t5_req[17] ^ `TOP.cpu.sii_l2t5_req[18] ^ `TOP.cpu.sii_l2t5_req[19] ^ `TOP.cpu.sii_l2t5_req[20] ^ `TOP.cpu.sii_l2t5_req[21] ^ `TOP.cpu.sii_l2t5_req[22] ^ `TOP.cpu.sii_l2t5_req[23] ^ `TOP.cpu.sii_l2t5_req[24] ^ `TOP.cpu.sii_l2t5_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t5_req_vld,11))) && ($0in_delay(sii_l2t5_req[24] == 0,11)) && ($0in_delay(sii_l2t5_req[25] == 0,11)) && ($0in_delay(sii_l2t5_req[26] == 1,11)) && ($0in_rising_edge($0in_delay(l2t5_sii_iq_dequeue,11))) && !(sii_wri_ecc4_l5_cycle10 == sii_l2b5_ecc[4]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc4_l5_wri_cycle10
*/

wire sii_wri_ecc5_l5_cycle10 =  (`TOP.cpu.sii_l2t5_req[26] ^ `TOP.cpu.sii_l2t5_req[27] ^ `TOP.cpu.sii_l2t5_req[28] ^ `TOP.cpu.sii_l2t5_req[29] ^ `TOP.cpu.sii_l2t5_req[30] ^ `TOP.cpu.sii_l2t5_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t5_req_vld,11))) && ($0in_delay(sii_l2t5_req[24] == 0,11)) && ($0in_delay(sii_l2t5_req[25] == 0,11)) && ($0in_delay(sii_l2t5_req[26] == 1,11)) && ($0in_rising_edge($0in_delay(l2t5_sii_iq_dequeue,11))) && !(sii_wri_ecc5_l5_cycle10 == sii_l2b5_ecc[5]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc5_l5_wri_cycle10
*/

wire sii_wri_ecc6_l5_cycle10 =  (`TOP.cpu.sii_l2t5_req[0] ^ `TOP.cpu.sii_l2t5_req[1] ^ `TOP.cpu.sii_l2t5_req[2] ^ `TOP.cpu.sii_l2t5_req[4] ^ `TOP.cpu.sii_l2t5_req[5] ^ `TOP.cpu.sii_l2t5_req[7] ^ `TOP.cpu.sii_l2t5_req[10] ^ `TOP.cpu.sii_l2t5_req[11] ^ `TOP.cpu.sii_l2t5_req[12] ^ `TOP.cpu.sii_l2t5_req[14] ^ `TOP.cpu.sii_l2t5_req[17] ^ `TOP.cpu.sii_l2t5_req[18] ^ `TOP.cpu.sii_l2t5_req[21] ^ `TOP.cpu.sii_l2t5_req[23] ^ `TOP.cpu.sii_l2t5_req[24] ^ `TOP.cpu.sii_l2t5_req[26] ^ `TOP.cpu.sii_l2t5_req[27] ^ `TOP.cpu.sii_l2t5_req[29] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t5_req_vld,11))) && ($0in_delay(sii_l2t5_req[24] == 0,11)) && ($0in_delay(sii_l2t5_req[25] == 0,11)) && ($0in_delay(sii_l2t5_req[26] == 1,11)) && ($0in_rising_edge($0in_delay(l2t5_sii_iq_dequeue,11))) && !(sii_wri_ecc6_l5_cycle10 == sii_l2b5_ecc[6]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc6_l5_wri_cycle10
*/

wire sii_wri_ecc0_l5_cycle11 =  (`TOP.cpu.sii_l2t5_req[0] ^ `TOP.cpu.sii_l2t5_req[1] ^ `TOP.cpu.sii_l2t5_req[3] ^ `TOP.cpu.sii_l2t5_req[4] ^ `TOP.cpu.sii_l2t5_req[6] ^ `TOP.cpu.sii_l2t5_req[8] ^ `TOP.cpu.sii_l2t5_req[10] ^ `TOP.cpu.sii_l2t5_req[11] ^ `TOP.cpu.sii_l2t5_req[13] ^ `TOP.cpu.sii_l2t5_req[15] ^ `TOP.cpu.sii_l2t5_req[17] ^ `TOP.cpu.sii_l2t5_req[19] ^ `TOP.cpu.sii_l2t5_req[21] ^ `TOP.cpu.sii_l2t5_req[23] ^ `TOP.cpu.sii_l2t5_req[25] ^ `TOP.cpu.sii_l2t5_req[26] ^ `TOP.cpu.sii_l2t5_req[28] ^ `TOP.cpu.sii_l2t5_req[30] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t5_req_vld,12))) && ($0in_delay(sii_l2t5_req[24] == 0,12)) && ($0in_delay(sii_l2t5_req[25] == 0,12)) && ($0in_delay(sii_l2t5_req[26] == 1,12)) && ($0in_rising_edge($0in_delay(l2t5_sii_iq_dequeue,12))) && !(sii_wri_ecc0_l5_cycle11 == sii_l2b5_ecc[0]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc0_l5_wri_cycle11
*/

wire sii_wri_ecc1_l5_cycle11 =  (`TOP.cpu.sii_l2t5_req[0] ^ `TOP.cpu.sii_l2t5_req[2] ^ `TOP.cpu.sii_l2t5_req[3] ^ `TOP.cpu.sii_l2t5_req[5] ^ `TOP.cpu.sii_l2t5_req[6] ^ `TOP.cpu.sii_l2t5_req[9] ^ `TOP.cpu.sii_l2t5_req[10] ^ `TOP.cpu.sii_l2t5_req[12] ^ `TOP.cpu.sii_l2t5_req[13] ^ `TOP.cpu.sii_l2t5_req[16] ^ `TOP.cpu.sii_l2t5_req[17] ^ `TOP.cpu.sii_l2t5_req[20] ^ `TOP.cpu.sii_l2t5_req[21] ^ `TOP.cpu.sii_l2t5_req[24] ^ `TOP.cpu.sii_l2t5_req[25] ^ `TOP.cpu.sii_l2t5_req[27] ^ `TOP.cpu.sii_l2t5_req[28] ^ `TOP.cpu.sii_l2t5_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t5_req_vld,12))) && ($0in_delay(sii_l2t5_req[24] == 0,12)) && ($0in_delay(sii_l2t5_req[25] == 0,12)) && ($0in_delay(sii_l2t5_req[26] == 1,12)) && ($0in_rising_edge($0in_delay(l2t5_sii_iq_dequeue,12))) && !(sii_wri_ecc1_l5_cycle11 == sii_l2b5_ecc[1]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc1_l5_wri_cycle11
*/

wire sii_wri_ecc2_l5_cycle11 =  (`TOP.cpu.sii_l2t5_req[1] ^ `TOP.cpu.sii_l2t5_req[2] ^ `TOP.cpu.sii_l2t5_req[3] ^ `TOP.cpu.sii_l2t5_req[7] ^ `TOP.cpu.sii_l2t5_req[8] ^ `TOP.cpu.sii_l2t5_req[9] ^ `TOP.cpu.sii_l2t5_req[10] ^ `TOP.cpu.sii_l2t5_req[14] ^ `TOP.cpu.sii_l2t5_req[15] ^ `TOP.cpu.sii_l2t5_req[16] ^ `TOP.cpu.sii_l2t5_req[17] ^ `TOP.cpu.sii_l2t5_req[22] ^ `TOP.cpu.sii_l2t5_req[23] ^ `TOP.cpu.sii_l2t5_req[24] ^ `TOP.cpu.sii_l2t5_req[25] ^ `TOP.cpu.sii_l2t5_req[29] ^ `TOP.cpu.sii_l2t5_req[30] ^ `TOP.cpu.sii_l2t5_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t5_req_vld,12))) && ($0in_delay(sii_l2t5_req[24] == 0,12)) && ($0in_delay(sii_l2t5_req[25] == 0,12)) && ($0in_delay(sii_l2t5_req[26] == 1,12)) && ($0in_rising_edge($0in_delay(l2t5_sii_iq_dequeue,12))) && !(sii_wri_ecc2_l5_cycle11 == sii_l2b5_ecc[2]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc2_l5_wri_cycle11
*/

wire sii_wri_ecc3_l5_cycle11 =  (`TOP.cpu.sii_l2t5_req[4] ^ `TOP.cpu.sii_l2t5_req[5] ^ `TOP.cpu.sii_l2t5_req[6] ^ `TOP.cpu.sii_l2t5_req[7] ^ `TOP.cpu.sii_l2t5_req[8] ^ `TOP.cpu.sii_l2t5_req[9] ^ `TOP.cpu.sii_l2t5_req[10] ^ `TOP.cpu.sii_l2t5_req[18] ^ `TOP.cpu.sii_l2t5_req[19] ^ `TOP.cpu.sii_l2t5_req[20] ^ `TOP.cpu.sii_l2t5_req[21] ^ `TOP.cpu.sii_l2t5_req[22] ^ `TOP.cpu.sii_l2t5_req[23] ^ `TOP.cpu.sii_l2t5_req[24] ^ `TOP.cpu.sii_l2t5_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t5_req_vld,12))) && ($0in_delay(sii_l2t5_req[24] == 0,12)) && ($0in_delay(sii_l2t5_req[25] == 0,12)) && ($0in_delay(sii_l2t5_req[26] == 1,12)) && ($0in_rising_edge($0in_delay(l2t5_sii_iq_dequeue,12))) && !(sii_wri_ecc3_l5_cycle11 == sii_l2b5_ecc[3]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc3_l5_wri_cycle11
*/

wire sii_wri_ecc4_l5_cycle11 =  ( `TOP.cpu.sii_l2t5_req[11] ^ `TOP.cpu.sii_l2t5_req[12] ^ `TOP.cpu.sii_l2t5_req[13] ^ `TOP.cpu.sii_l2t5_req[14] ^ `TOP.cpu.sii_l2t5_req[15] ^ `TOP.cpu.sii_l2t5_req[16] ^ `TOP.cpu.sii_l2t5_req[17] ^ `TOP.cpu.sii_l2t5_req[18] ^ `TOP.cpu.sii_l2t5_req[19] ^ `TOP.cpu.sii_l2t5_req[20] ^ `TOP.cpu.sii_l2t5_req[21] ^ `TOP.cpu.sii_l2t5_req[22] ^ `TOP.cpu.sii_l2t5_req[23] ^ `TOP.cpu.sii_l2t5_req[24] ^ `TOP.cpu.sii_l2t5_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t5_req_vld,12))) && ($0in_delay(sii_l2t5_req[24] == 0,12)) && ($0in_delay(sii_l2t5_req[25] == 0,12)) && ($0in_delay(sii_l2t5_req[26] == 1,12)) && ($0in_rising_edge($0in_delay(l2t5_sii_iq_dequeue,12))) && !(sii_wri_ecc4_l5_cycle11 == sii_l2b5_ecc[4]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc4_l5_wri_cycle11
*/

wire sii_wri_ecc5_l5_cycle11 =  (`TOP.cpu.sii_l2t5_req[26] ^ `TOP.cpu.sii_l2t5_req[27] ^ `TOP.cpu.sii_l2t5_req[28] ^ `TOP.cpu.sii_l2t5_req[29] ^ `TOP.cpu.sii_l2t5_req[30] ^ `TOP.cpu.sii_l2t5_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t5_req_vld,12))) && ($0in_delay(sii_l2t5_req[24] == 0,12)) && ($0in_delay(sii_l2t5_req[25] == 0,12)) && ($0in_delay(sii_l2t5_req[26] == 1,12)) && ($0in_rising_edge($0in_delay(l2t5_sii_iq_dequeue,12))) && !(sii_wri_ecc5_l5_cycle11 == sii_l2b5_ecc[5]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc5_l5_wri_cycle11
*/

wire sii_wri_ecc6_l5_cycle11 =  (`TOP.cpu.sii_l2t5_req[0] ^ `TOP.cpu.sii_l2t5_req[1] ^ `TOP.cpu.sii_l2t5_req[2] ^ `TOP.cpu.sii_l2t5_req[4] ^ `TOP.cpu.sii_l2t5_req[5] ^ `TOP.cpu.sii_l2t5_req[7] ^ `TOP.cpu.sii_l2t5_req[10] ^ `TOP.cpu.sii_l2t5_req[11] ^ `TOP.cpu.sii_l2t5_req[12] ^ `TOP.cpu.sii_l2t5_req[14] ^ `TOP.cpu.sii_l2t5_req[17] ^ `TOP.cpu.sii_l2t5_req[18] ^ `TOP.cpu.sii_l2t5_req[21] ^ `TOP.cpu.sii_l2t5_req[23] ^ `TOP.cpu.sii_l2t5_req[24] ^ `TOP.cpu.sii_l2t5_req[26] ^ `TOP.cpu.sii_l2t5_req[27] ^ `TOP.cpu.sii_l2t5_req[29] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t5_req_vld,12))) && ($0in_delay(sii_l2t5_req[24] == 0,12)) && ($0in_delay(sii_l2t5_req[25] == 0,12)) && ($0in_delay(sii_l2t5_req[26] == 1,12)) && ($0in_rising_edge($0in_delay(l2t5_sii_iq_dequeue,12))) && !(sii_wri_ecc6_l5_cycle11 == sii_l2b5_ecc[6]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc6_l5_wri_cycle11
*/

wire sii_wri_ecc0_l5_cycle12 =  (`TOP.cpu.sii_l2t5_req[0] ^ `TOP.cpu.sii_l2t5_req[1] ^ `TOP.cpu.sii_l2t5_req[3] ^ `TOP.cpu.sii_l2t5_req[4] ^ `TOP.cpu.sii_l2t5_req[6] ^ `TOP.cpu.sii_l2t5_req[8] ^ `TOP.cpu.sii_l2t5_req[10] ^ `TOP.cpu.sii_l2t5_req[11] ^ `TOP.cpu.sii_l2t5_req[13] ^ `TOP.cpu.sii_l2t5_req[15] ^ `TOP.cpu.sii_l2t5_req[17] ^ `TOP.cpu.sii_l2t5_req[19] ^ `TOP.cpu.sii_l2t5_req[21] ^ `TOP.cpu.sii_l2t5_req[23] ^ `TOP.cpu.sii_l2t5_req[25] ^ `TOP.cpu.sii_l2t5_req[26] ^ `TOP.cpu.sii_l2t5_req[28] ^ `TOP.cpu.sii_l2t5_req[30] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t5_req_vld,13))) && ($0in_delay(sii_l2t5_req[24] == 0,13)) && ($0in_delay(sii_l2t5_req[25] == 0,13)) && ($0in_delay(sii_l2t5_req[26] == 1,13)) && ($0in_rising_edge($0in_delay(l2t5_sii_iq_dequeue,13))) && !(sii_wri_ecc0_l5_cycle12 == sii_l2b5_ecc[0]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc0_l5_wri_cycle12
*/

wire sii_wri_ecc1_l5_cycle12 =  (`TOP.cpu.sii_l2t5_req[0] ^ `TOP.cpu.sii_l2t5_req[2] ^ `TOP.cpu.sii_l2t5_req[3] ^ `TOP.cpu.sii_l2t5_req[5] ^ `TOP.cpu.sii_l2t5_req[6] ^ `TOP.cpu.sii_l2t5_req[9] ^ `TOP.cpu.sii_l2t5_req[10] ^ `TOP.cpu.sii_l2t5_req[12] ^ `TOP.cpu.sii_l2t5_req[13] ^ `TOP.cpu.sii_l2t5_req[16] ^ `TOP.cpu.sii_l2t5_req[17] ^ `TOP.cpu.sii_l2t5_req[20] ^ `TOP.cpu.sii_l2t5_req[21] ^ `TOP.cpu.sii_l2t5_req[24] ^ `TOP.cpu.sii_l2t5_req[25] ^ `TOP.cpu.sii_l2t5_req[27] ^ `TOP.cpu.sii_l2t5_req[28] ^ `TOP.cpu.sii_l2t5_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t5_req_vld,13))) && ($0in_delay(sii_l2t5_req[24] == 0,13)) && ($0in_delay(sii_l2t5_req[25] == 0,13)) && ($0in_delay(sii_l2t5_req[26] == 1,13)) && ($0in_rising_edge($0in_delay(l2t5_sii_iq_dequeue,13))) && !(sii_wri_ecc1_l5_cycle12 == sii_l2b5_ecc[1]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc1_l5_wri_cycle12
*/

wire sii_wri_ecc2_l5_cycle12 =  (`TOP.cpu.sii_l2t5_req[1] ^ `TOP.cpu.sii_l2t5_req[2] ^ `TOP.cpu.sii_l2t5_req[3] ^ `TOP.cpu.sii_l2t5_req[7] ^ `TOP.cpu.sii_l2t5_req[8] ^ `TOP.cpu.sii_l2t5_req[9] ^ `TOP.cpu.sii_l2t5_req[10] ^ `TOP.cpu.sii_l2t5_req[14] ^ `TOP.cpu.sii_l2t5_req[15] ^ `TOP.cpu.sii_l2t5_req[16] ^ `TOP.cpu.sii_l2t5_req[17] ^ `TOP.cpu.sii_l2t5_req[22] ^ `TOP.cpu.sii_l2t5_req[23] ^ `TOP.cpu.sii_l2t5_req[24] ^ `TOP.cpu.sii_l2t5_req[25] ^ `TOP.cpu.sii_l2t5_req[29] ^ `TOP.cpu.sii_l2t5_req[30] ^ `TOP.cpu.sii_l2t5_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t5_req_vld,13))) && ($0in_delay(sii_l2t5_req[24] == 0,13)) && ($0in_delay(sii_l2t5_req[25] == 0,13)) && ($0in_delay(sii_l2t5_req[26] == 1,13)) && ($0in_rising_edge($0in_delay(l2t5_sii_iq_dequeue,13))) && !(sii_wri_ecc2_l5_cycle12 == sii_l2b5_ecc[2]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc2_l5_wri_cycle12
*/

wire sii_wri_ecc3_l5_cycle12 =  (`TOP.cpu.sii_l2t5_req[4] ^ `TOP.cpu.sii_l2t5_req[5] ^ `TOP.cpu.sii_l2t5_req[6] ^ `TOP.cpu.sii_l2t5_req[7] ^ `TOP.cpu.sii_l2t5_req[8] ^ `TOP.cpu.sii_l2t5_req[9] ^ `TOP.cpu.sii_l2t5_req[10] ^ `TOP.cpu.sii_l2t5_req[18] ^ `TOP.cpu.sii_l2t5_req[19] ^ `TOP.cpu.sii_l2t5_req[20] ^ `TOP.cpu.sii_l2t5_req[21] ^ `TOP.cpu.sii_l2t5_req[22] ^ `TOP.cpu.sii_l2t5_req[23] ^ `TOP.cpu.sii_l2t5_req[24] ^ `TOP.cpu.sii_l2t5_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t5_req_vld,13))) && ($0in_delay(sii_l2t5_req[24] == 0,13)) && ($0in_delay(sii_l2t5_req[25] == 0,13)) && ($0in_delay(sii_l2t5_req[26] == 1,13)) && ($0in_rising_edge($0in_delay(l2t5_sii_iq_dequeue,13))) && !(sii_wri_ecc3_l5_cycle12 == sii_l2b5_ecc[3]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc3_l5_wri_cycle12
*/

wire sii_wri_ecc4_l5_cycle12 =  ( `TOP.cpu.sii_l2t5_req[11] ^ `TOP.cpu.sii_l2t5_req[12] ^ `TOP.cpu.sii_l2t5_req[13] ^ `TOP.cpu.sii_l2t5_req[14] ^ `TOP.cpu.sii_l2t5_req[15] ^ `TOP.cpu.sii_l2t5_req[16] ^ `TOP.cpu.sii_l2t5_req[17] ^ `TOP.cpu.sii_l2t5_req[18] ^ `TOP.cpu.sii_l2t5_req[19] ^ `TOP.cpu.sii_l2t5_req[20] ^ `TOP.cpu.sii_l2t5_req[21] ^ `TOP.cpu.sii_l2t5_req[22] ^ `TOP.cpu.sii_l2t5_req[23] ^ `TOP.cpu.sii_l2t5_req[24] ^ `TOP.cpu.sii_l2t5_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t5_req_vld,13))) && ($0in_delay(sii_l2t5_req[24] == 0,13)) && ($0in_delay(sii_l2t5_req[25] == 0,13)) && ($0in_delay(sii_l2t5_req[26] == 1,13)) && ($0in_rising_edge($0in_delay(l2t5_sii_iq_dequeue,13))) && !(sii_wri_ecc4_l5_cycle12 == sii_l2b5_ecc[4]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc4_l5_wri_cycle12
*/

wire sii_wri_ecc5_l5_cycle12 =  (`TOP.cpu.sii_l2t5_req[26] ^ `TOP.cpu.sii_l2t5_req[27] ^ `TOP.cpu.sii_l2t5_req[28] ^ `TOP.cpu.sii_l2t5_req[29] ^ `TOP.cpu.sii_l2t5_req[30] ^ `TOP.cpu.sii_l2t5_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t5_req_vld,13))) && ($0in_delay(sii_l2t5_req[24] == 0,13)) && ($0in_delay(sii_l2t5_req[25] == 0,13)) && ($0in_delay(sii_l2t5_req[26] == 1,13)) && ($0in_rising_edge($0in_delay(l2t5_sii_iq_dequeue,13))) && !(sii_wri_ecc5_l5_cycle12 == sii_l2b5_ecc[5]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc5_l5_wri_cycle12
*/

wire sii_wri_ecc6_l5_cycle12 =  (`TOP.cpu.sii_l2t5_req[0] ^ `TOP.cpu.sii_l2t5_req[1] ^ `TOP.cpu.sii_l2t5_req[2] ^ `TOP.cpu.sii_l2t5_req[4] ^ `TOP.cpu.sii_l2t5_req[5] ^ `TOP.cpu.sii_l2t5_req[7] ^ `TOP.cpu.sii_l2t5_req[10] ^ `TOP.cpu.sii_l2t5_req[11] ^ `TOP.cpu.sii_l2t5_req[12] ^ `TOP.cpu.sii_l2t5_req[14] ^ `TOP.cpu.sii_l2t5_req[17] ^ `TOP.cpu.sii_l2t5_req[18] ^ `TOP.cpu.sii_l2t5_req[21] ^ `TOP.cpu.sii_l2t5_req[23] ^ `TOP.cpu.sii_l2t5_req[24] ^ `TOP.cpu.sii_l2t5_req[26] ^ `TOP.cpu.sii_l2t5_req[27] ^ `TOP.cpu.sii_l2t5_req[29] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t5_req_vld,13))) && ($0in_delay(sii_l2t5_req[24] == 0,13)) && ($0in_delay(sii_l2t5_req[25] == 0,13)) && ($0in_delay(sii_l2t5_req[26] == 1,13)) && ($0in_rising_edge($0in_delay(l2t5_sii_iq_dequeue,13))) && !(sii_wri_ecc6_l5_cycle12 == sii_l2b5_ecc[6]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc6_l5_wri_cycle12
*/

wire sii_wri_ecc0_l5_cycle13 =  (`TOP.cpu.sii_l2t5_req[0] ^ `TOP.cpu.sii_l2t5_req[1] ^ `TOP.cpu.sii_l2t5_req[3] ^ `TOP.cpu.sii_l2t5_req[4] ^ `TOP.cpu.sii_l2t5_req[6] ^ `TOP.cpu.sii_l2t5_req[8] ^ `TOP.cpu.sii_l2t5_req[10] ^ `TOP.cpu.sii_l2t5_req[11] ^ `TOP.cpu.sii_l2t5_req[13] ^ `TOP.cpu.sii_l2t5_req[15] ^ `TOP.cpu.sii_l2t5_req[17] ^ `TOP.cpu.sii_l2t5_req[19] ^ `TOP.cpu.sii_l2t5_req[21] ^ `TOP.cpu.sii_l2t5_req[23] ^ `TOP.cpu.sii_l2t5_req[25] ^ `TOP.cpu.sii_l2t5_req[26] ^ `TOP.cpu.sii_l2t5_req[28] ^ `TOP.cpu.sii_l2t5_req[30] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t5_req_vld,14))) && ($0in_delay(sii_l2t5_req[24] == 0,14)) && ($0in_delay(sii_l2t5_req[25] == 0,14)) && ($0in_delay(sii_l2t5_req[26] == 1,14)) && ($0in_rising_edge($0in_delay(l2t5_sii_iq_dequeue,14))) && !(sii_wri_ecc0_l5_cycle13 == sii_l2b5_ecc[0]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc0_l5_wri_cycle13
*/

wire sii_wri_ecc1_l5_cycle13 =  (`TOP.cpu.sii_l2t5_req[0] ^ `TOP.cpu.sii_l2t5_req[2] ^ `TOP.cpu.sii_l2t5_req[3] ^ `TOP.cpu.sii_l2t5_req[5] ^ `TOP.cpu.sii_l2t5_req[6] ^ `TOP.cpu.sii_l2t5_req[9] ^ `TOP.cpu.sii_l2t5_req[10] ^ `TOP.cpu.sii_l2t5_req[12] ^ `TOP.cpu.sii_l2t5_req[13] ^ `TOP.cpu.sii_l2t5_req[16] ^ `TOP.cpu.sii_l2t5_req[17] ^ `TOP.cpu.sii_l2t5_req[20] ^ `TOP.cpu.sii_l2t5_req[21] ^ `TOP.cpu.sii_l2t5_req[24] ^ `TOP.cpu.sii_l2t5_req[25] ^ `TOP.cpu.sii_l2t5_req[27] ^ `TOP.cpu.sii_l2t5_req[28] ^ `TOP.cpu.sii_l2t5_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t5_req_vld,14))) && ($0in_delay(sii_l2t5_req[24] == 0,14)) && ($0in_delay(sii_l2t5_req[25] == 0,14)) && ($0in_delay(sii_l2t5_req[26] == 1,14)) && ($0in_rising_edge($0in_delay(l2t5_sii_iq_dequeue,14))) && !(sii_wri_ecc1_l5_cycle13 == sii_l2b5_ecc[1]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc1_l5_wri_cycle13
*/

wire sii_wri_ecc2_l5_cycle13 =  (`TOP.cpu.sii_l2t5_req[1] ^ `TOP.cpu.sii_l2t5_req[2] ^ `TOP.cpu.sii_l2t5_req[3] ^ `TOP.cpu.sii_l2t5_req[7] ^ `TOP.cpu.sii_l2t5_req[8] ^ `TOP.cpu.sii_l2t5_req[9] ^ `TOP.cpu.sii_l2t5_req[10] ^ `TOP.cpu.sii_l2t5_req[14] ^ `TOP.cpu.sii_l2t5_req[15] ^ `TOP.cpu.sii_l2t5_req[16] ^ `TOP.cpu.sii_l2t5_req[17] ^ `TOP.cpu.sii_l2t5_req[22] ^ `TOP.cpu.sii_l2t5_req[23] ^ `TOP.cpu.sii_l2t5_req[24] ^ `TOP.cpu.sii_l2t5_req[25] ^ `TOP.cpu.sii_l2t5_req[29] ^ `TOP.cpu.sii_l2t5_req[30] ^ `TOP.cpu.sii_l2t5_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t5_req_vld,14))) && ($0in_delay(sii_l2t5_req[24] == 0,14)) && ($0in_delay(sii_l2t5_req[25] == 0,14)) && ($0in_delay(sii_l2t5_req[26] == 1,14)) && ($0in_rising_edge($0in_delay(l2t5_sii_iq_dequeue,14))) && !(sii_wri_ecc2_l5_cycle13 == sii_l2b5_ecc[2]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc2_l5_wri_cycle13
*/

wire sii_wri_ecc3_l5_cycle13 =  (`TOP.cpu.sii_l2t5_req[4] ^ `TOP.cpu.sii_l2t5_req[5] ^ `TOP.cpu.sii_l2t5_req[6] ^ `TOP.cpu.sii_l2t5_req[7] ^ `TOP.cpu.sii_l2t5_req[8] ^ `TOP.cpu.sii_l2t5_req[9] ^ `TOP.cpu.sii_l2t5_req[10] ^ `TOP.cpu.sii_l2t5_req[18] ^ `TOP.cpu.sii_l2t5_req[19] ^ `TOP.cpu.sii_l2t5_req[20] ^ `TOP.cpu.sii_l2t5_req[21] ^ `TOP.cpu.sii_l2t5_req[22] ^ `TOP.cpu.sii_l2t5_req[23] ^ `TOP.cpu.sii_l2t5_req[24] ^ `TOP.cpu.sii_l2t5_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t5_req_vld,14))) && ($0in_delay(sii_l2t5_req[24] == 0,14)) && ($0in_delay(sii_l2t5_req[25] == 0,14)) && ($0in_delay(sii_l2t5_req[26] == 1,14)) && ($0in_rising_edge($0in_delay(l2t5_sii_iq_dequeue,14))) && !(sii_wri_ecc3_l5_cycle13 == sii_l2b5_ecc[3]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc3_l5_wri_cycle13
*/

wire sii_wri_ecc4_l5_cycle13 =  ( `TOP.cpu.sii_l2t5_req[11] ^ `TOP.cpu.sii_l2t5_req[12] ^ `TOP.cpu.sii_l2t5_req[13] ^ `TOP.cpu.sii_l2t5_req[14] ^ `TOP.cpu.sii_l2t5_req[15] ^ `TOP.cpu.sii_l2t5_req[16] ^ `TOP.cpu.sii_l2t5_req[17] ^ `TOP.cpu.sii_l2t5_req[18] ^ `TOP.cpu.sii_l2t5_req[19] ^ `TOP.cpu.sii_l2t5_req[20] ^ `TOP.cpu.sii_l2t5_req[21] ^ `TOP.cpu.sii_l2t5_req[22] ^ `TOP.cpu.sii_l2t5_req[23] ^ `TOP.cpu.sii_l2t5_req[24] ^ `TOP.cpu.sii_l2t5_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t5_req_vld,14))) && ($0in_delay(sii_l2t5_req[24] == 0,14)) && ($0in_delay(sii_l2t5_req[25] == 0,14)) && ($0in_delay(sii_l2t5_req[26] == 1,14)) && ($0in_rising_edge($0in_delay(l2t5_sii_iq_dequeue,14))) && !(sii_wri_ecc4_l5_cycle13 == sii_l2b5_ecc[4]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc4_l5_wri_cycle13
*/

wire sii_wri_ecc5_l5_cycle13 =  (`TOP.cpu.sii_l2t5_req[26] ^ `TOP.cpu.sii_l2t5_req[27] ^ `TOP.cpu.sii_l2t5_req[28] ^ `TOP.cpu.sii_l2t5_req[29] ^ `TOP.cpu.sii_l2t5_req[30] ^ `TOP.cpu.sii_l2t5_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t5_req_vld,14))) && ($0in_delay(sii_l2t5_req[24] == 0,14)) && ($0in_delay(sii_l2t5_req[25] == 0,14)) && ($0in_delay(sii_l2t5_req[26] == 1,14)) && ($0in_rising_edge($0in_delay(l2t5_sii_iq_dequeue,14))) && !(sii_wri_ecc5_l5_cycle13 == sii_l2b5_ecc[5]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc5_l5_wri_cycle13
*/

wire sii_wri_ecc6_l5_cycle13 =  (`TOP.cpu.sii_l2t5_req[0] ^ `TOP.cpu.sii_l2t5_req[1] ^ `TOP.cpu.sii_l2t5_req[2] ^ `TOP.cpu.sii_l2t5_req[4] ^ `TOP.cpu.sii_l2t5_req[5] ^ `TOP.cpu.sii_l2t5_req[7] ^ `TOP.cpu.sii_l2t5_req[10] ^ `TOP.cpu.sii_l2t5_req[11] ^ `TOP.cpu.sii_l2t5_req[12] ^ `TOP.cpu.sii_l2t5_req[14] ^ `TOP.cpu.sii_l2t5_req[17] ^ `TOP.cpu.sii_l2t5_req[18] ^ `TOP.cpu.sii_l2t5_req[21] ^ `TOP.cpu.sii_l2t5_req[23] ^ `TOP.cpu.sii_l2t5_req[24] ^ `TOP.cpu.sii_l2t5_req[26] ^ `TOP.cpu.sii_l2t5_req[27] ^ `TOP.cpu.sii_l2t5_req[29] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t5_req_vld,14))) && ($0in_delay(sii_l2t5_req[24] == 0,14)) && ($0in_delay(sii_l2t5_req[25] == 0,14)) && ($0in_delay(sii_l2t5_req[26] == 1,14)) && ($0in_rising_edge($0in_delay(l2t5_sii_iq_dequeue,14))) && !(sii_wri_ecc6_l5_cycle13 == sii_l2b5_ecc[6]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc6_l5_wri_cycle13
*/

wire sii_wri_ecc0_l5_cycle14 =  (`TOP.cpu.sii_l2t5_req[0] ^ `TOP.cpu.sii_l2t5_req[1] ^ `TOP.cpu.sii_l2t5_req[3] ^ `TOP.cpu.sii_l2t5_req[4] ^ `TOP.cpu.sii_l2t5_req[6] ^ `TOP.cpu.sii_l2t5_req[8] ^ `TOP.cpu.sii_l2t5_req[10] ^ `TOP.cpu.sii_l2t5_req[11] ^ `TOP.cpu.sii_l2t5_req[13] ^ `TOP.cpu.sii_l2t5_req[15] ^ `TOP.cpu.sii_l2t5_req[17] ^ `TOP.cpu.sii_l2t5_req[19] ^ `TOP.cpu.sii_l2t5_req[21] ^ `TOP.cpu.sii_l2t5_req[23] ^ `TOP.cpu.sii_l2t5_req[25] ^ `TOP.cpu.sii_l2t5_req[26] ^ `TOP.cpu.sii_l2t5_req[28] ^ `TOP.cpu.sii_l2t5_req[30] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t5_req_vld,15))) && ($0in_delay(sii_l2t5_req[24] == 0,15)) && ($0in_delay(sii_l2t5_req[25] == 0,15)) && ($0in_delay(sii_l2t5_req[26] == 1,15)) && ($0in_rising_edge($0in_delay(l2t5_sii_iq_dequeue,15))) && !(sii_wri_ecc0_l5_cycle14 == sii_l2b5_ecc[0]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc0_l5_wri_cycle14
*/

wire sii_wri_ecc1_l5_cycle14 =  (`TOP.cpu.sii_l2t5_req[0] ^ `TOP.cpu.sii_l2t5_req[2] ^ `TOP.cpu.sii_l2t5_req[3] ^ `TOP.cpu.sii_l2t5_req[5] ^ `TOP.cpu.sii_l2t5_req[6] ^ `TOP.cpu.sii_l2t5_req[9] ^ `TOP.cpu.sii_l2t5_req[10] ^ `TOP.cpu.sii_l2t5_req[12] ^ `TOP.cpu.sii_l2t5_req[13] ^ `TOP.cpu.sii_l2t5_req[16] ^ `TOP.cpu.sii_l2t5_req[17] ^ `TOP.cpu.sii_l2t5_req[20] ^ `TOP.cpu.sii_l2t5_req[21] ^ `TOP.cpu.sii_l2t5_req[24] ^ `TOP.cpu.sii_l2t5_req[25] ^ `TOP.cpu.sii_l2t5_req[27] ^ `TOP.cpu.sii_l2t5_req[28] ^ `TOP.cpu.sii_l2t5_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t5_req_vld,15))) && ($0in_delay(sii_l2t5_req[24] == 0,15)) && ($0in_delay(sii_l2t5_req[25] == 0,15)) && ($0in_delay(sii_l2t5_req[26] == 1,15)) && ($0in_rising_edge($0in_delay(l2t5_sii_iq_dequeue,15))) && !(sii_wri_ecc1_l5_cycle14 == sii_l2b5_ecc[1]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc1_l5_wri_cycle14
*/

wire sii_wri_ecc2_l5_cycle14 =  (`TOP.cpu.sii_l2t5_req[1] ^ `TOP.cpu.sii_l2t5_req[2] ^ `TOP.cpu.sii_l2t5_req[3] ^ `TOP.cpu.sii_l2t5_req[7] ^ `TOP.cpu.sii_l2t5_req[8] ^ `TOP.cpu.sii_l2t5_req[9] ^ `TOP.cpu.sii_l2t5_req[10] ^ `TOP.cpu.sii_l2t5_req[14] ^ `TOP.cpu.sii_l2t5_req[15] ^ `TOP.cpu.sii_l2t5_req[16] ^ `TOP.cpu.sii_l2t5_req[17] ^ `TOP.cpu.sii_l2t5_req[22] ^ `TOP.cpu.sii_l2t5_req[23] ^ `TOP.cpu.sii_l2t5_req[24] ^ `TOP.cpu.sii_l2t5_req[25] ^ `TOP.cpu.sii_l2t5_req[29] ^ `TOP.cpu.sii_l2t5_req[30] ^ `TOP.cpu.sii_l2t5_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t5_req_vld,15))) && ($0in_delay(sii_l2t5_req[24] == 0,15)) && ($0in_delay(sii_l2t5_req[25] == 0,15)) && ($0in_delay(sii_l2t5_req[26] == 1,15)) && ($0in_rising_edge($0in_delay(l2t5_sii_iq_dequeue,15))) && !(sii_wri_ecc2_l5_cycle14 == sii_l2b5_ecc[2]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc2_l5_wri_cycle14
*/

wire sii_wri_ecc3_l5_cycle14 =  (`TOP.cpu.sii_l2t5_req[4] ^ `TOP.cpu.sii_l2t5_req[5] ^ `TOP.cpu.sii_l2t5_req[6] ^ `TOP.cpu.sii_l2t5_req[7] ^ `TOP.cpu.sii_l2t5_req[8] ^ `TOP.cpu.sii_l2t5_req[9] ^ `TOP.cpu.sii_l2t5_req[10] ^ `TOP.cpu.sii_l2t5_req[18] ^ `TOP.cpu.sii_l2t5_req[19] ^ `TOP.cpu.sii_l2t5_req[20] ^ `TOP.cpu.sii_l2t5_req[21] ^ `TOP.cpu.sii_l2t5_req[22] ^ `TOP.cpu.sii_l2t5_req[23] ^ `TOP.cpu.sii_l2t5_req[24] ^ `TOP.cpu.sii_l2t5_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t5_req_vld,15))) && ($0in_delay(sii_l2t5_req[24] == 0,15)) && ($0in_delay(sii_l2t5_req[25] == 0,15)) && ($0in_delay(sii_l2t5_req[26] == 1,15)) && ($0in_rising_edge($0in_delay(l2t5_sii_iq_dequeue,15))) && !(sii_wri_ecc3_l5_cycle14 == sii_l2b5_ecc[3]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc3_l5_wri_cycle14
*/

wire sii_wri_ecc4_l5_cycle14 =  ( `TOP.cpu.sii_l2t5_req[11] ^ `TOP.cpu.sii_l2t5_req[12] ^ `TOP.cpu.sii_l2t5_req[13] ^ `TOP.cpu.sii_l2t5_req[14] ^ `TOP.cpu.sii_l2t5_req[15] ^ `TOP.cpu.sii_l2t5_req[16] ^ `TOP.cpu.sii_l2t5_req[17] ^ `TOP.cpu.sii_l2t5_req[18] ^ `TOP.cpu.sii_l2t5_req[19] ^ `TOP.cpu.sii_l2t5_req[20] ^ `TOP.cpu.sii_l2t5_req[21] ^ `TOP.cpu.sii_l2t5_req[22] ^ `TOP.cpu.sii_l2t5_req[23] ^ `TOP.cpu.sii_l2t5_req[24] ^ `TOP.cpu.sii_l2t5_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t5_req_vld,15))) && ($0in_delay(sii_l2t5_req[24] == 0,15)) && ($0in_delay(sii_l2t5_req[25] == 0,15)) && ($0in_delay(sii_l2t5_req[26] == 1,15)) && ($0in_rising_edge($0in_delay(l2t5_sii_iq_dequeue,15))) && !(sii_wri_ecc4_l5_cycle14 == sii_l2b5_ecc[4]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc4_l5_wri_cycle14
*/

wire sii_wri_ecc5_l5_cycle14 =  (`TOP.cpu.sii_l2t5_req[26] ^ `TOP.cpu.sii_l2t5_req[27] ^ `TOP.cpu.sii_l2t5_req[28] ^ `TOP.cpu.sii_l2t5_req[29] ^ `TOP.cpu.sii_l2t5_req[30] ^ `TOP.cpu.sii_l2t5_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t5_req_vld,15))) && ($0in_delay(sii_l2t5_req[24] == 0,15)) && ($0in_delay(sii_l2t5_req[25] == 0,15)) && ($0in_delay(sii_l2t5_req[26] == 1,15)) && ($0in_rising_edge($0in_delay(l2t5_sii_iq_dequeue,15))) && !(sii_wri_ecc5_l5_cycle14 == sii_l2b5_ecc[5]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc5_l5_wri_cycle14
*/

wire sii_wri_ecc6_l5_cycle14 =  (`TOP.cpu.sii_l2t5_req[0] ^ `TOP.cpu.sii_l2t5_req[1] ^ `TOP.cpu.sii_l2t5_req[2] ^ `TOP.cpu.sii_l2t5_req[4] ^ `TOP.cpu.sii_l2t5_req[5] ^ `TOP.cpu.sii_l2t5_req[7] ^ `TOP.cpu.sii_l2t5_req[10] ^ `TOP.cpu.sii_l2t5_req[11] ^ `TOP.cpu.sii_l2t5_req[12] ^ `TOP.cpu.sii_l2t5_req[14] ^ `TOP.cpu.sii_l2t5_req[17] ^ `TOP.cpu.sii_l2t5_req[18] ^ `TOP.cpu.sii_l2t5_req[21] ^ `TOP.cpu.sii_l2t5_req[23] ^ `TOP.cpu.sii_l2t5_req[24] ^ `TOP.cpu.sii_l2t5_req[26] ^ `TOP.cpu.sii_l2t5_req[27] ^ `TOP.cpu.sii_l2t5_req[29] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t5_req_vld,15))) && ($0in_delay(sii_l2t5_req[24] == 0,15)) && ($0in_delay(sii_l2t5_req[25] == 0,15)) && ($0in_delay(sii_l2t5_req[26] == 1,15)) && ($0in_rising_edge($0in_delay(l2t5_sii_iq_dequeue,15))) && !(sii_wri_ecc6_l5_cycle14 == sii_l2b5_ecc[6]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc6_l5_wri_cycle14
*/

wire sii_wri_ecc0_l5_cycle15 =  (`TOP.cpu.sii_l2t5_req[0] ^ `TOP.cpu.sii_l2t5_req[1] ^ `TOP.cpu.sii_l2t5_req[3] ^ `TOP.cpu.sii_l2t5_req[4] ^ `TOP.cpu.sii_l2t5_req[6] ^ `TOP.cpu.sii_l2t5_req[8] ^ `TOP.cpu.sii_l2t5_req[10] ^ `TOP.cpu.sii_l2t5_req[11] ^ `TOP.cpu.sii_l2t5_req[13] ^ `TOP.cpu.sii_l2t5_req[15] ^ `TOP.cpu.sii_l2t5_req[17] ^ `TOP.cpu.sii_l2t5_req[19] ^ `TOP.cpu.sii_l2t5_req[21] ^ `TOP.cpu.sii_l2t5_req[23] ^ `TOP.cpu.sii_l2t5_req[25] ^ `TOP.cpu.sii_l2t5_req[26] ^ `TOP.cpu.sii_l2t5_req[28] ^ `TOP.cpu.sii_l2t5_req[30] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t5_req_vld,16))) && ($0in_delay(sii_l2t5_req[24] == 0,16)) && ($0in_delay(sii_l2t5_req[25] == 0,16)) && ($0in_delay(sii_l2t5_req[26] == 1,16)) && ($0in_rising_edge($0in_delay(l2t5_sii_iq_dequeue,16))) && !(sii_wri_ecc0_l5_cycle15 == sii_l2b5_ecc[0]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc0_l5_wri_cycle15
*/

wire sii_wri_ecc1_l5_cycle15 =  (`TOP.cpu.sii_l2t5_req[0] ^ `TOP.cpu.sii_l2t5_req[2] ^ `TOP.cpu.sii_l2t5_req[3] ^ `TOP.cpu.sii_l2t5_req[5] ^ `TOP.cpu.sii_l2t5_req[6] ^ `TOP.cpu.sii_l2t5_req[9] ^ `TOP.cpu.sii_l2t5_req[10] ^ `TOP.cpu.sii_l2t5_req[12] ^ `TOP.cpu.sii_l2t5_req[13] ^ `TOP.cpu.sii_l2t5_req[16] ^ `TOP.cpu.sii_l2t5_req[17] ^ `TOP.cpu.sii_l2t5_req[20] ^ `TOP.cpu.sii_l2t5_req[21] ^ `TOP.cpu.sii_l2t5_req[24] ^ `TOP.cpu.sii_l2t5_req[25] ^ `TOP.cpu.sii_l2t5_req[27] ^ `TOP.cpu.sii_l2t5_req[28] ^ `TOP.cpu.sii_l2t5_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t5_req_vld,16))) && ($0in_delay(sii_l2t5_req[24] == 0,16)) && ($0in_delay(sii_l2t5_req[25] == 0,16)) && ($0in_delay(sii_l2t5_req[26] == 1,16)) && ($0in_rising_edge($0in_delay(l2t5_sii_iq_dequeue,16))) && !(sii_wri_ecc1_l5_cycle15 == sii_l2b5_ecc[1]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc1_l5_wri_cycle15
*/

wire sii_wri_ecc2_l5_cycle15 =  (`TOP.cpu.sii_l2t5_req[1] ^ `TOP.cpu.sii_l2t5_req[2] ^ `TOP.cpu.sii_l2t5_req[3] ^ `TOP.cpu.sii_l2t5_req[7] ^ `TOP.cpu.sii_l2t5_req[8] ^ `TOP.cpu.sii_l2t5_req[9] ^ `TOP.cpu.sii_l2t5_req[10] ^ `TOP.cpu.sii_l2t5_req[14] ^ `TOP.cpu.sii_l2t5_req[15] ^ `TOP.cpu.sii_l2t5_req[16] ^ `TOP.cpu.sii_l2t5_req[17] ^ `TOP.cpu.sii_l2t5_req[22] ^ `TOP.cpu.sii_l2t5_req[23] ^ `TOP.cpu.sii_l2t5_req[24] ^ `TOP.cpu.sii_l2t5_req[25] ^ `TOP.cpu.sii_l2t5_req[29] ^ `TOP.cpu.sii_l2t5_req[30] ^ `TOP.cpu.sii_l2t5_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t5_req_vld,16))) && ($0in_delay(sii_l2t5_req[24] == 0,16)) && ($0in_delay(sii_l2t5_req[25] == 0,16)) && ($0in_delay(sii_l2t5_req[26] == 1,16)) && ($0in_rising_edge($0in_delay(l2t5_sii_iq_dequeue,16))) && !(sii_wri_ecc2_l5_cycle15 == sii_l2b5_ecc[2]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc2_l5_wri_cycle15
*/

wire sii_wri_ecc3_l5_cycle15 =  (`TOP.cpu.sii_l2t5_req[4] ^ `TOP.cpu.sii_l2t5_req[5] ^ `TOP.cpu.sii_l2t5_req[6] ^ `TOP.cpu.sii_l2t5_req[7] ^ `TOP.cpu.sii_l2t5_req[8] ^ `TOP.cpu.sii_l2t5_req[9] ^ `TOP.cpu.sii_l2t5_req[10] ^ `TOP.cpu.sii_l2t5_req[18] ^ `TOP.cpu.sii_l2t5_req[19] ^ `TOP.cpu.sii_l2t5_req[20] ^ `TOP.cpu.sii_l2t5_req[21] ^ `TOP.cpu.sii_l2t5_req[22] ^ `TOP.cpu.sii_l2t5_req[23] ^ `TOP.cpu.sii_l2t5_req[24] ^ `TOP.cpu.sii_l2t5_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t5_req_vld,16))) && ($0in_delay(sii_l2t5_req[24] == 0,16)) && ($0in_delay(sii_l2t5_req[25] == 0,16)) && ($0in_delay(sii_l2t5_req[26] == 1,16)) && ($0in_rising_edge($0in_delay(l2t5_sii_iq_dequeue,16))) && !(sii_wri_ecc3_l5_cycle15 == sii_l2b5_ecc[3]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc3_l5_wri_cycle15
*/

wire sii_wri_ecc4_l5_cycle15 =  ( `TOP.cpu.sii_l2t5_req[11] ^ `TOP.cpu.sii_l2t5_req[12] ^ `TOP.cpu.sii_l2t5_req[13] ^ `TOP.cpu.sii_l2t5_req[14] ^ `TOP.cpu.sii_l2t5_req[15] ^ `TOP.cpu.sii_l2t5_req[16] ^ `TOP.cpu.sii_l2t5_req[17] ^ `TOP.cpu.sii_l2t5_req[18] ^ `TOP.cpu.sii_l2t5_req[19] ^ `TOP.cpu.sii_l2t5_req[20] ^ `TOP.cpu.sii_l2t5_req[21] ^ `TOP.cpu.sii_l2t5_req[22] ^ `TOP.cpu.sii_l2t5_req[23] ^ `TOP.cpu.sii_l2t5_req[24] ^ `TOP.cpu.sii_l2t5_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t5_req_vld,16))) && ($0in_delay(sii_l2t5_req[24] == 0,16)) && ($0in_delay(sii_l2t5_req[25] == 0,16)) && ($0in_delay(sii_l2t5_req[26] == 1,16)) && ($0in_rising_edge($0in_delay(l2t5_sii_iq_dequeue,16))) && !(sii_wri_ecc4_l5_cycle15 == sii_l2b5_ecc[4]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc4_l5_wri_cycle15
*/

wire sii_wri_ecc5_l5_cycle15 =  (`TOP.cpu.sii_l2t5_req[26] ^ `TOP.cpu.sii_l2t5_req[27] ^ `TOP.cpu.sii_l2t5_req[28] ^ `TOP.cpu.sii_l2t5_req[29] ^ `TOP.cpu.sii_l2t5_req[30] ^ `TOP.cpu.sii_l2t5_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t5_req_vld,16))) && ($0in_delay(sii_l2t5_req[24] == 0,16)) && ($0in_delay(sii_l2t5_req[25] == 0,16)) && ($0in_delay(sii_l2t5_req[26] == 1,16)) && ($0in_rising_edge($0in_delay(l2t5_sii_iq_dequeue,16))) && !(sii_wri_ecc5_l5_cycle15 == sii_l2b5_ecc[5]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc5_l5_wri_cycle15
*/

wire sii_wri_ecc6_l5_cycle15 =  (`TOP.cpu.sii_l2t5_req[0] ^ `TOP.cpu.sii_l2t5_req[1] ^ `TOP.cpu.sii_l2t5_req[2] ^ `TOP.cpu.sii_l2t5_req[4] ^ `TOP.cpu.sii_l2t5_req[5] ^ `TOP.cpu.sii_l2t5_req[7] ^ `TOP.cpu.sii_l2t5_req[10] ^ `TOP.cpu.sii_l2t5_req[11] ^ `TOP.cpu.sii_l2t5_req[12] ^ `TOP.cpu.sii_l2t5_req[14] ^ `TOP.cpu.sii_l2t5_req[17] ^ `TOP.cpu.sii_l2t5_req[18] ^ `TOP.cpu.sii_l2t5_req[21] ^ `TOP.cpu.sii_l2t5_req[23] ^ `TOP.cpu.sii_l2t5_req[24] ^ `TOP.cpu.sii_l2t5_req[26] ^ `TOP.cpu.sii_l2t5_req[27] ^ `TOP.cpu.sii_l2t5_req[29] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t5_req_vld,16))) && ($0in_delay(sii_l2t5_req[24] == 0,16)) && ($0in_delay(sii_l2t5_req[25] == 0,16)) && ($0in_delay(sii_l2t5_req[26] == 1,16)) && ($0in_rising_edge($0in_delay(l2t5_sii_iq_dequeue,16))) && !(sii_wri_ecc6_l5_cycle15 == sii_l2b5_ecc[6]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc6_l5_wri_cycle15
*/

wire sii_wri_ecc0_l5_cycle16 =  (`TOP.cpu.sii_l2t5_req[0] ^ `TOP.cpu.sii_l2t5_req[1] ^ `TOP.cpu.sii_l2t5_req[3] ^ `TOP.cpu.sii_l2t5_req[4] ^ `TOP.cpu.sii_l2t5_req[6] ^ `TOP.cpu.sii_l2t5_req[8] ^ `TOP.cpu.sii_l2t5_req[10] ^ `TOP.cpu.sii_l2t5_req[11] ^ `TOP.cpu.sii_l2t5_req[13] ^ `TOP.cpu.sii_l2t5_req[15] ^ `TOP.cpu.sii_l2t5_req[17] ^ `TOP.cpu.sii_l2t5_req[19] ^ `TOP.cpu.sii_l2t5_req[21] ^ `TOP.cpu.sii_l2t5_req[23] ^ `TOP.cpu.sii_l2t5_req[25] ^ `TOP.cpu.sii_l2t5_req[26] ^ `TOP.cpu.sii_l2t5_req[28] ^ `TOP.cpu.sii_l2t5_req[30] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t5_req_vld,17))) && ($0in_delay(sii_l2t5_req[24] == 0,17)) && ($0in_delay(sii_l2t5_req[25] == 0,17)) && ($0in_delay(sii_l2t5_req[26] == 1,17)) && ($0in_rising_edge($0in_delay(l2t5_sii_iq_dequeue,17))) && !(sii_wri_ecc0_l5_cycle16 == sii_l2b5_ecc[0]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc0_l5_wri_cycle16
*/

wire sii_wri_ecc1_l5_cycle16 =  (`TOP.cpu.sii_l2t5_req[0] ^ `TOP.cpu.sii_l2t5_req[2] ^ `TOP.cpu.sii_l2t5_req[3] ^ `TOP.cpu.sii_l2t5_req[5] ^ `TOP.cpu.sii_l2t5_req[6] ^ `TOP.cpu.sii_l2t5_req[9] ^ `TOP.cpu.sii_l2t5_req[10] ^ `TOP.cpu.sii_l2t5_req[12] ^ `TOP.cpu.sii_l2t5_req[13] ^ `TOP.cpu.sii_l2t5_req[16] ^ `TOP.cpu.sii_l2t5_req[17] ^ `TOP.cpu.sii_l2t5_req[20] ^ `TOP.cpu.sii_l2t5_req[21] ^ `TOP.cpu.sii_l2t5_req[24] ^ `TOP.cpu.sii_l2t5_req[25] ^ `TOP.cpu.sii_l2t5_req[27] ^ `TOP.cpu.sii_l2t5_req[28] ^ `TOP.cpu.sii_l2t5_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t5_req_vld,17))) && ($0in_delay(sii_l2t5_req[24] == 0,17)) && ($0in_delay(sii_l2t5_req[25] == 0,17)) && ($0in_delay(sii_l2t5_req[26] == 1,17)) && ($0in_rising_edge($0in_delay(l2t5_sii_iq_dequeue,17))) && !(sii_wri_ecc1_l5_cycle16 == sii_l2b5_ecc[1]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc1_l5_wri_cycle16
*/

wire sii_wri_ecc2_l5_cycle16 =  (`TOP.cpu.sii_l2t5_req[1] ^ `TOP.cpu.sii_l2t5_req[2] ^ `TOP.cpu.sii_l2t5_req[3] ^ `TOP.cpu.sii_l2t5_req[7] ^ `TOP.cpu.sii_l2t5_req[8] ^ `TOP.cpu.sii_l2t5_req[9] ^ `TOP.cpu.sii_l2t5_req[10] ^ `TOP.cpu.sii_l2t5_req[14] ^ `TOP.cpu.sii_l2t5_req[15] ^ `TOP.cpu.sii_l2t5_req[16] ^ `TOP.cpu.sii_l2t5_req[17] ^ `TOP.cpu.sii_l2t5_req[22] ^ `TOP.cpu.sii_l2t5_req[23] ^ `TOP.cpu.sii_l2t5_req[24] ^ `TOP.cpu.sii_l2t5_req[25] ^ `TOP.cpu.sii_l2t5_req[29] ^ `TOP.cpu.sii_l2t5_req[30] ^ `TOP.cpu.sii_l2t5_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t5_req_vld,17))) && ($0in_delay(sii_l2t5_req[24] == 0,17)) && ($0in_delay(sii_l2t5_req[25] == 0,17)) && ($0in_delay(sii_l2t5_req[26] == 1,17)) && ($0in_rising_edge($0in_delay(l2t5_sii_iq_dequeue,17))) && !(sii_wri_ecc2_l5_cycle16 == sii_l2b5_ecc[2]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc2_l5_wri_cycle16
*/

wire sii_wri_ecc3_l5_cycle16 =  (`TOP.cpu.sii_l2t5_req[4] ^ `TOP.cpu.sii_l2t5_req[5] ^ `TOP.cpu.sii_l2t5_req[6] ^ `TOP.cpu.sii_l2t5_req[7] ^ `TOP.cpu.sii_l2t5_req[8] ^ `TOP.cpu.sii_l2t5_req[9] ^ `TOP.cpu.sii_l2t5_req[10] ^ `TOP.cpu.sii_l2t5_req[18] ^ `TOP.cpu.sii_l2t5_req[19] ^ `TOP.cpu.sii_l2t5_req[20] ^ `TOP.cpu.sii_l2t5_req[21] ^ `TOP.cpu.sii_l2t5_req[22] ^ `TOP.cpu.sii_l2t5_req[23] ^ `TOP.cpu.sii_l2t5_req[24] ^ `TOP.cpu.sii_l2t5_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t5_req_vld,17))) && ($0in_delay(sii_l2t5_req[24] == 0,17)) && ($0in_delay(sii_l2t5_req[25] == 0,17)) && ($0in_delay(sii_l2t5_req[26] == 1,17)) && ($0in_rising_edge($0in_delay(l2t5_sii_iq_dequeue,17))) && !(sii_wri_ecc3_l5_cycle16 == sii_l2b5_ecc[3]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc3_l5_wri_cycle16
*/

wire sii_wri_ecc4_l5_cycle16 =  ( `TOP.cpu.sii_l2t5_req[11] ^ `TOP.cpu.sii_l2t5_req[12] ^ `TOP.cpu.sii_l2t5_req[13] ^ `TOP.cpu.sii_l2t5_req[14] ^ `TOP.cpu.sii_l2t5_req[15] ^ `TOP.cpu.sii_l2t5_req[16] ^ `TOP.cpu.sii_l2t5_req[17] ^ `TOP.cpu.sii_l2t5_req[18] ^ `TOP.cpu.sii_l2t5_req[19] ^ `TOP.cpu.sii_l2t5_req[20] ^ `TOP.cpu.sii_l2t5_req[21] ^ `TOP.cpu.sii_l2t5_req[22] ^ `TOP.cpu.sii_l2t5_req[23] ^ `TOP.cpu.sii_l2t5_req[24] ^ `TOP.cpu.sii_l2t5_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t5_req_vld,17))) && ($0in_delay(sii_l2t5_req[24] == 0,17)) && ($0in_delay(sii_l2t5_req[25] == 0,17)) && ($0in_delay(sii_l2t5_req[26] == 1,17)) && ($0in_rising_edge($0in_delay(l2t5_sii_iq_dequeue,17))) && !(sii_wri_ecc4_l5_cycle16 == sii_l2b5_ecc[4]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc4_l5_wri_cycle16
*/

wire sii_wri_ecc5_l5_cycle16 =  (`TOP.cpu.sii_l2t5_req[26] ^ `TOP.cpu.sii_l2t5_req[27] ^ `TOP.cpu.sii_l2t5_req[28] ^ `TOP.cpu.sii_l2t5_req[29] ^ `TOP.cpu.sii_l2t5_req[30] ^ `TOP.cpu.sii_l2t5_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t5_req_vld,17))) && ($0in_delay(sii_l2t5_req[24] == 0,17)) && ($0in_delay(sii_l2t5_req[25] == 0,17)) && ($0in_delay(sii_l2t5_req[26] == 1,17)) && ($0in_rising_edge($0in_delay(l2t5_sii_iq_dequeue,17))) && !(sii_wri_ecc5_l5_cycle16 == sii_l2b5_ecc[5]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc5_l5_wri_cycle16
*/

wire sii_wri_ecc6_l5_cycle16 =  (`TOP.cpu.sii_l2t5_req[0] ^ `TOP.cpu.sii_l2t5_req[1] ^ `TOP.cpu.sii_l2t5_req[2] ^ `TOP.cpu.sii_l2t5_req[4] ^ `TOP.cpu.sii_l2t5_req[5] ^ `TOP.cpu.sii_l2t5_req[7] ^ `TOP.cpu.sii_l2t5_req[10] ^ `TOP.cpu.sii_l2t5_req[11] ^ `TOP.cpu.sii_l2t5_req[12] ^ `TOP.cpu.sii_l2t5_req[14] ^ `TOP.cpu.sii_l2t5_req[17] ^ `TOP.cpu.sii_l2t5_req[18] ^ `TOP.cpu.sii_l2t5_req[21] ^ `TOP.cpu.sii_l2t5_req[23] ^ `TOP.cpu.sii_l2t5_req[24] ^ `TOP.cpu.sii_l2t5_req[26] ^ `TOP.cpu.sii_l2t5_req[27] ^ `TOP.cpu.sii_l2t5_req[29] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t5_req_vld,17))) && ($0in_delay(sii_l2t5_req[24] == 0,17)) && ($0in_delay(sii_l2t5_req[25] == 0,17)) && ($0in_delay(sii_l2t5_req[26] == 1,17)) && ($0in_rising_edge($0in_delay(l2t5_sii_iq_dequeue,17))) && !(sii_wri_ecc6_l5_cycle16 == sii_l2b5_ecc[6]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc6_l5_wri_cycle16
*/

wire sii_wri_ecc0_l6_cycle1 =  (`TOP.cpu.sii_l2t6_req[0] ^ `TOP.cpu.sii_l2t6_req[1] ^ `TOP.cpu.sii_l2t6_req[3] ^ `TOP.cpu.sii_l2t6_req[4] ^ `TOP.cpu.sii_l2t6_req[6] ^ `TOP.cpu.sii_l2t6_req[8] ^ `TOP.cpu.sii_l2t6_req[10] ^ `TOP.cpu.sii_l2t6_req[11] ^ `TOP.cpu.sii_l2t6_req[13] ^ `TOP.cpu.sii_l2t6_req[15] ^ `TOP.cpu.sii_l2t6_req[17] ^ `TOP.cpu.sii_l2t6_req[19] ^ `TOP.cpu.sii_l2t6_req[21] ^ `TOP.cpu.sii_l2t6_req[23] ^ `TOP.cpu.sii_l2t6_req[25] ^ `TOP.cpu.sii_l2t6_req[26] ^ `TOP.cpu.sii_l2t6_req[28] ^ `TOP.cpu.sii_l2t6_req[30] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t6_req_vld,2))) && ($0in_delay(sii_l2t6_req[24] == 0,2)) && ($0in_delay(sii_l2t6_req[25] == 0,2)) && ($0in_delay(sii_l2t6_req[26] == 1,2)) && ($0in_rising_edge($0in_delay(l2t6_sii_iq_dequeue,2))) && !(sii_wri_ecc0_l6_cycle1 == sii_l2b6_ecc[0]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc0_l6_wri_cycle1
*/

wire sii_wri_ecc1_l6_cycle1 =  (`TOP.cpu.sii_l2t6_req[0] ^ `TOP.cpu.sii_l2t6_req[2] ^ `TOP.cpu.sii_l2t6_req[3] ^ `TOP.cpu.sii_l2t6_req[5] ^ `TOP.cpu.sii_l2t6_req[6] ^ `TOP.cpu.sii_l2t6_req[9] ^ `TOP.cpu.sii_l2t6_req[10] ^ `TOP.cpu.sii_l2t6_req[12] ^ `TOP.cpu.sii_l2t6_req[13] ^ `TOP.cpu.sii_l2t6_req[16] ^ `TOP.cpu.sii_l2t6_req[17] ^ `TOP.cpu.sii_l2t6_req[20] ^ `TOP.cpu.sii_l2t6_req[21] ^ `TOP.cpu.sii_l2t6_req[24] ^ `TOP.cpu.sii_l2t6_req[25] ^ `TOP.cpu.sii_l2t6_req[27] ^ `TOP.cpu.sii_l2t6_req[28] ^ `TOP.cpu.sii_l2t6_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t6_req_vld,2))) && ($0in_delay(sii_l2t6_req[24] == 0,2)) && ($0in_delay(sii_l2t6_req[25] == 0,2)) && ($0in_delay(sii_l2t6_req[26] == 1,2)) && ($0in_rising_edge($0in_delay(l2t6_sii_iq_dequeue,2))) && !(sii_wri_ecc1_l6_cycle1 == sii_l2b6_ecc[1]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc1_l6_wri_cycle1
*/

wire sii_wri_ecc2_l6_cycle1 =  (`TOP.cpu.sii_l2t6_req[1] ^ `TOP.cpu.sii_l2t6_req[2] ^ `TOP.cpu.sii_l2t6_req[3] ^ `TOP.cpu.sii_l2t6_req[7] ^ `TOP.cpu.sii_l2t6_req[8] ^ `TOP.cpu.sii_l2t6_req[9] ^ `TOP.cpu.sii_l2t6_req[10] ^ `TOP.cpu.sii_l2t6_req[14] ^ `TOP.cpu.sii_l2t6_req[15] ^ `TOP.cpu.sii_l2t6_req[16] ^ `TOP.cpu.sii_l2t6_req[17] ^ `TOP.cpu.sii_l2t6_req[22] ^ `TOP.cpu.sii_l2t6_req[23] ^ `TOP.cpu.sii_l2t6_req[24] ^ `TOP.cpu.sii_l2t6_req[25] ^ `TOP.cpu.sii_l2t6_req[29] ^ `TOP.cpu.sii_l2t6_req[30] ^ `TOP.cpu.sii_l2t6_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t6_req_vld,2))) && ($0in_delay(sii_l2t6_req[24] == 0,2)) && ($0in_delay(sii_l2t6_req[25] == 0,2)) && ($0in_delay(sii_l2t6_req[26] == 1,2)) && ($0in_rising_edge($0in_delay(l2t6_sii_iq_dequeue,2))) && !(sii_wri_ecc2_l6_cycle1 == sii_l2b6_ecc[2]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc2_l6_wri_cycle1
*/

wire sii_wri_ecc3_l6_cycle1 =  (`TOP.cpu.sii_l2t6_req[4] ^ `TOP.cpu.sii_l2t6_req[5] ^ `TOP.cpu.sii_l2t6_req[6] ^ `TOP.cpu.sii_l2t6_req[7] ^ `TOP.cpu.sii_l2t6_req[8] ^ `TOP.cpu.sii_l2t6_req[9] ^ `TOP.cpu.sii_l2t6_req[10] ^ `TOP.cpu.sii_l2t6_req[18] ^ `TOP.cpu.sii_l2t6_req[19] ^ `TOP.cpu.sii_l2t6_req[20] ^ `TOP.cpu.sii_l2t6_req[21] ^ `TOP.cpu.sii_l2t6_req[22] ^ `TOP.cpu.sii_l2t6_req[23] ^ `TOP.cpu.sii_l2t6_req[24] ^ `TOP.cpu.sii_l2t6_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t6_req_vld,2))) && ($0in_delay(sii_l2t6_req[24] == 0,2)) && ($0in_delay(sii_l2t6_req[25] == 0,2)) && ($0in_delay(sii_l2t6_req[26] == 1,2)) && ($0in_rising_edge($0in_delay(l2t6_sii_iq_dequeue,2))) && !(sii_wri_ecc3_l6_cycle1 == sii_l2b6_ecc[3]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc3_l6_wri_cycle1
*/

wire sii_wri_ecc4_l6_cycle1 =  ( `TOP.cpu.sii_l2t6_req[11] ^ `TOP.cpu.sii_l2t6_req[12] ^ `TOP.cpu.sii_l2t6_req[13] ^ `TOP.cpu.sii_l2t6_req[14] ^ `TOP.cpu.sii_l2t6_req[15] ^ `TOP.cpu.sii_l2t6_req[16] ^ `TOP.cpu.sii_l2t6_req[17] ^ `TOP.cpu.sii_l2t6_req[18] ^ `TOP.cpu.sii_l2t6_req[19] ^ `TOP.cpu.sii_l2t6_req[20] ^ `TOP.cpu.sii_l2t6_req[21] ^ `TOP.cpu.sii_l2t6_req[22] ^ `TOP.cpu.sii_l2t6_req[23] ^ `TOP.cpu.sii_l2t6_req[24] ^ `TOP.cpu.sii_l2t6_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t6_req_vld,2))) && ($0in_delay(sii_l2t6_req[24] == 0,2)) && ($0in_delay(sii_l2t6_req[25] == 0,2)) && ($0in_delay(sii_l2t6_req[26] == 1,2)) && ($0in_rising_edge($0in_delay(l2t6_sii_iq_dequeue,2))) && !(sii_wri_ecc4_l6_cycle1 == sii_l2b6_ecc[4]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc4_l6_wri_cycle1
*/

wire sii_wri_ecc5_l6_cycle1 =  (`TOP.cpu.sii_l2t6_req[26] ^ `TOP.cpu.sii_l2t6_req[27] ^ `TOP.cpu.sii_l2t6_req[28] ^ `TOP.cpu.sii_l2t6_req[29] ^ `TOP.cpu.sii_l2t6_req[30] ^ `TOP.cpu.sii_l2t6_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t6_req_vld,2))) && ($0in_delay(sii_l2t6_req[24] == 0,2)) && ($0in_delay(sii_l2t6_req[25] == 0,2)) && ($0in_delay(sii_l2t6_req[26] == 1,2)) && ($0in_rising_edge($0in_delay(l2t6_sii_iq_dequeue,2))) && !(sii_wri_ecc5_l6_cycle1 == sii_l2b6_ecc[5]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc5_l6_wri_cycle1
*/

wire sii_wri_ecc6_l6_cycle1 =  (`TOP.cpu.sii_l2t6_req[0] ^ `TOP.cpu.sii_l2t6_req[1] ^ `TOP.cpu.sii_l2t6_req[2] ^ `TOP.cpu.sii_l2t6_req[4] ^ `TOP.cpu.sii_l2t6_req[5] ^ `TOP.cpu.sii_l2t6_req[7] ^ `TOP.cpu.sii_l2t6_req[10] ^ `TOP.cpu.sii_l2t6_req[11] ^ `TOP.cpu.sii_l2t6_req[12] ^ `TOP.cpu.sii_l2t6_req[14] ^ `TOP.cpu.sii_l2t6_req[17] ^ `TOP.cpu.sii_l2t6_req[18] ^ `TOP.cpu.sii_l2t6_req[21] ^ `TOP.cpu.sii_l2t6_req[23] ^ `TOP.cpu.sii_l2t6_req[24] ^ `TOP.cpu.sii_l2t6_req[26] ^ `TOP.cpu.sii_l2t6_req[27] ^ `TOP.cpu.sii_l2t6_req[29] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t6_req_vld,2))) && ($0in_delay(sii_l2t6_req[24] == 0,2)) && ($0in_delay(sii_l2t6_req[25] == 0,2)) && ($0in_delay(sii_l2t6_req[26] == 1,2)) && ($0in_rising_edge($0in_delay(l2t6_sii_iq_dequeue,2))) && !(sii_wri_ecc6_l6_cycle1 == sii_l2b6_ecc[6]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc6_l6_wri_cycle1
*/

wire sii_wri_ecc0_l6_cycle2 =  (`TOP.cpu.sii_l2t6_req[0] ^ `TOP.cpu.sii_l2t6_req[1] ^ `TOP.cpu.sii_l2t6_req[3] ^ `TOP.cpu.sii_l2t6_req[4] ^ `TOP.cpu.sii_l2t6_req[6] ^ `TOP.cpu.sii_l2t6_req[8] ^ `TOP.cpu.sii_l2t6_req[10] ^ `TOP.cpu.sii_l2t6_req[11] ^ `TOP.cpu.sii_l2t6_req[13] ^ `TOP.cpu.sii_l2t6_req[15] ^ `TOP.cpu.sii_l2t6_req[17] ^ `TOP.cpu.sii_l2t6_req[19] ^ `TOP.cpu.sii_l2t6_req[21] ^ `TOP.cpu.sii_l2t6_req[23] ^ `TOP.cpu.sii_l2t6_req[25] ^ `TOP.cpu.sii_l2t6_req[26] ^ `TOP.cpu.sii_l2t6_req[28] ^ `TOP.cpu.sii_l2t6_req[30] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t6_req_vld,3))) && ($0in_delay(sii_l2t6_req[24] == 0,3)) && ($0in_delay(sii_l2t6_req[25] == 0,3)) && ($0in_delay(sii_l2t6_req[26] == 1,3)) && ($0in_rising_edge($0in_delay(l2t6_sii_iq_dequeue,3))) && !(sii_wri_ecc0_l6_cycle2 == sii_l2b6_ecc[0]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc0_l6_wri_cycle2
*/

wire sii_wri_ecc1_l6_cycle2 =  (`TOP.cpu.sii_l2t6_req[0] ^ `TOP.cpu.sii_l2t6_req[2] ^ `TOP.cpu.sii_l2t6_req[3] ^ `TOP.cpu.sii_l2t6_req[5] ^ `TOP.cpu.sii_l2t6_req[6] ^ `TOP.cpu.sii_l2t6_req[9] ^ `TOP.cpu.sii_l2t6_req[10] ^ `TOP.cpu.sii_l2t6_req[12] ^ `TOP.cpu.sii_l2t6_req[13] ^ `TOP.cpu.sii_l2t6_req[16] ^ `TOP.cpu.sii_l2t6_req[17] ^ `TOP.cpu.sii_l2t6_req[20] ^ `TOP.cpu.sii_l2t6_req[21] ^ `TOP.cpu.sii_l2t6_req[24] ^ `TOP.cpu.sii_l2t6_req[25] ^ `TOP.cpu.sii_l2t6_req[27] ^ `TOP.cpu.sii_l2t6_req[28] ^ `TOP.cpu.sii_l2t6_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t6_req_vld,3))) && ($0in_delay(sii_l2t6_req[24] == 0,3)) && ($0in_delay(sii_l2t6_req[25] == 0,3)) && ($0in_delay(sii_l2t6_req[26] == 1,3)) && ($0in_rising_edge($0in_delay(l2t6_sii_iq_dequeue,3))) && !(sii_wri_ecc1_l6_cycle2 == sii_l2b6_ecc[1]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc1_l6_wri_cycle2
*/

wire sii_wri_ecc2_l6_cycle2 =  (`TOP.cpu.sii_l2t6_req[1] ^ `TOP.cpu.sii_l2t6_req[2] ^ `TOP.cpu.sii_l2t6_req[3] ^ `TOP.cpu.sii_l2t6_req[7] ^ `TOP.cpu.sii_l2t6_req[8] ^ `TOP.cpu.sii_l2t6_req[9] ^ `TOP.cpu.sii_l2t6_req[10] ^ `TOP.cpu.sii_l2t6_req[14] ^ `TOP.cpu.sii_l2t6_req[15] ^ `TOP.cpu.sii_l2t6_req[16] ^ `TOP.cpu.sii_l2t6_req[17] ^ `TOP.cpu.sii_l2t6_req[22] ^ `TOP.cpu.sii_l2t6_req[23] ^ `TOP.cpu.sii_l2t6_req[24] ^ `TOP.cpu.sii_l2t6_req[25] ^ `TOP.cpu.sii_l2t6_req[29] ^ `TOP.cpu.sii_l2t6_req[30] ^ `TOP.cpu.sii_l2t6_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t6_req_vld,3))) && ($0in_delay(sii_l2t6_req[24] == 0,3)) && ($0in_delay(sii_l2t6_req[25] == 0,3)) && ($0in_delay(sii_l2t6_req[26] == 1,3)) && ($0in_rising_edge($0in_delay(l2t6_sii_iq_dequeue,3))) && !(sii_wri_ecc2_l6_cycle2 == sii_l2b6_ecc[2]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc2_l6_wri_cycle2
*/

wire sii_wri_ecc3_l6_cycle2 =  (`TOP.cpu.sii_l2t6_req[4] ^ `TOP.cpu.sii_l2t6_req[5] ^ `TOP.cpu.sii_l2t6_req[6] ^ `TOP.cpu.sii_l2t6_req[7] ^ `TOP.cpu.sii_l2t6_req[8] ^ `TOP.cpu.sii_l2t6_req[9] ^ `TOP.cpu.sii_l2t6_req[10] ^ `TOP.cpu.sii_l2t6_req[18] ^ `TOP.cpu.sii_l2t6_req[19] ^ `TOP.cpu.sii_l2t6_req[20] ^ `TOP.cpu.sii_l2t6_req[21] ^ `TOP.cpu.sii_l2t6_req[22] ^ `TOP.cpu.sii_l2t6_req[23] ^ `TOP.cpu.sii_l2t6_req[24] ^ `TOP.cpu.sii_l2t6_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t6_req_vld,3))) && ($0in_delay(sii_l2t6_req[24] == 0,3)) && ($0in_delay(sii_l2t6_req[25] == 0,3)) && ($0in_delay(sii_l2t6_req[26] == 1,3)) && ($0in_rising_edge($0in_delay(l2t6_sii_iq_dequeue,3))) && !(sii_wri_ecc3_l6_cycle2 == sii_l2b6_ecc[3]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc3_l6_wri_cycle2
*/

wire sii_wri_ecc4_l6_cycle2 =  ( `TOP.cpu.sii_l2t6_req[11] ^ `TOP.cpu.sii_l2t6_req[12] ^ `TOP.cpu.sii_l2t6_req[13] ^ `TOP.cpu.sii_l2t6_req[14] ^ `TOP.cpu.sii_l2t6_req[15] ^ `TOP.cpu.sii_l2t6_req[16] ^ `TOP.cpu.sii_l2t6_req[17] ^ `TOP.cpu.sii_l2t6_req[18] ^ `TOP.cpu.sii_l2t6_req[19] ^ `TOP.cpu.sii_l2t6_req[20] ^ `TOP.cpu.sii_l2t6_req[21] ^ `TOP.cpu.sii_l2t6_req[22] ^ `TOP.cpu.sii_l2t6_req[23] ^ `TOP.cpu.sii_l2t6_req[24] ^ `TOP.cpu.sii_l2t6_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t6_req_vld,3))) && ($0in_delay(sii_l2t6_req[24] == 0,3)) && ($0in_delay(sii_l2t6_req[25] == 0,3)) && ($0in_delay(sii_l2t6_req[26] == 1,3)) && ($0in_rising_edge($0in_delay(l2t6_sii_iq_dequeue,3))) && !(sii_wri_ecc4_l6_cycle2 == sii_l2b6_ecc[4]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc4_l6_wri_cycle2
*/

wire sii_wri_ecc5_l6_cycle2 =  (`TOP.cpu.sii_l2t6_req[26] ^ `TOP.cpu.sii_l2t6_req[27] ^ `TOP.cpu.sii_l2t6_req[28] ^ `TOP.cpu.sii_l2t6_req[29] ^ `TOP.cpu.sii_l2t6_req[30] ^ `TOP.cpu.sii_l2t6_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t6_req_vld,3))) && ($0in_delay(sii_l2t6_req[24] == 0,3)) && ($0in_delay(sii_l2t6_req[25] == 0,3)) && ($0in_delay(sii_l2t6_req[26] == 1,3)) && ($0in_rising_edge($0in_delay(l2t6_sii_iq_dequeue,3))) && !(sii_wri_ecc5_l6_cycle2 == sii_l2b6_ecc[5]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc5_l6_wri_cycle2
*/

wire sii_wri_ecc6_l6_cycle2 =  (`TOP.cpu.sii_l2t6_req[0] ^ `TOP.cpu.sii_l2t6_req[1] ^ `TOP.cpu.sii_l2t6_req[2] ^ `TOP.cpu.sii_l2t6_req[4] ^ `TOP.cpu.sii_l2t6_req[5] ^ `TOP.cpu.sii_l2t6_req[7] ^ `TOP.cpu.sii_l2t6_req[10] ^ `TOP.cpu.sii_l2t6_req[11] ^ `TOP.cpu.sii_l2t6_req[12] ^ `TOP.cpu.sii_l2t6_req[14] ^ `TOP.cpu.sii_l2t6_req[17] ^ `TOP.cpu.sii_l2t6_req[18] ^ `TOP.cpu.sii_l2t6_req[21] ^ `TOP.cpu.sii_l2t6_req[23] ^ `TOP.cpu.sii_l2t6_req[24] ^ `TOP.cpu.sii_l2t6_req[26] ^ `TOP.cpu.sii_l2t6_req[27] ^ `TOP.cpu.sii_l2t6_req[29] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t6_req_vld,3))) && ($0in_delay(sii_l2t6_req[24] == 0,3)) && ($0in_delay(sii_l2t6_req[25] == 0,3)) && ($0in_delay(sii_l2t6_req[26] == 1,3)) && ($0in_rising_edge($0in_delay(l2t6_sii_iq_dequeue,3))) && !(sii_wri_ecc6_l6_cycle2 == sii_l2b6_ecc[6]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc6_l6_wri_cycle2
*/

wire sii_wri_ecc0_l6_cycle3 =  (`TOP.cpu.sii_l2t6_req[0] ^ `TOP.cpu.sii_l2t6_req[1] ^ `TOP.cpu.sii_l2t6_req[3] ^ `TOP.cpu.sii_l2t6_req[4] ^ `TOP.cpu.sii_l2t6_req[6] ^ `TOP.cpu.sii_l2t6_req[8] ^ `TOP.cpu.sii_l2t6_req[10] ^ `TOP.cpu.sii_l2t6_req[11] ^ `TOP.cpu.sii_l2t6_req[13] ^ `TOP.cpu.sii_l2t6_req[15] ^ `TOP.cpu.sii_l2t6_req[17] ^ `TOP.cpu.sii_l2t6_req[19] ^ `TOP.cpu.sii_l2t6_req[21] ^ `TOP.cpu.sii_l2t6_req[23] ^ `TOP.cpu.sii_l2t6_req[25] ^ `TOP.cpu.sii_l2t6_req[26] ^ `TOP.cpu.sii_l2t6_req[28] ^ `TOP.cpu.sii_l2t6_req[30] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t6_req_vld,4))) && ($0in_delay(sii_l2t6_req[24] == 0,4)) && ($0in_delay(sii_l2t6_req[25] == 0,4)) && ($0in_delay(sii_l2t6_req[26] == 1,4)) && ($0in_rising_edge($0in_delay(l2t6_sii_iq_dequeue,4))) && !(sii_wri_ecc0_l6_cycle3 == sii_l2b6_ecc[0]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc0_l6_wri_cycle3
*/

wire sii_wri_ecc1_l6_cycle3 =  (`TOP.cpu.sii_l2t6_req[0] ^ `TOP.cpu.sii_l2t6_req[2] ^ `TOP.cpu.sii_l2t6_req[3] ^ `TOP.cpu.sii_l2t6_req[5] ^ `TOP.cpu.sii_l2t6_req[6] ^ `TOP.cpu.sii_l2t6_req[9] ^ `TOP.cpu.sii_l2t6_req[10] ^ `TOP.cpu.sii_l2t6_req[12] ^ `TOP.cpu.sii_l2t6_req[13] ^ `TOP.cpu.sii_l2t6_req[16] ^ `TOP.cpu.sii_l2t6_req[17] ^ `TOP.cpu.sii_l2t6_req[20] ^ `TOP.cpu.sii_l2t6_req[21] ^ `TOP.cpu.sii_l2t6_req[24] ^ `TOP.cpu.sii_l2t6_req[25] ^ `TOP.cpu.sii_l2t6_req[27] ^ `TOP.cpu.sii_l2t6_req[28] ^ `TOP.cpu.sii_l2t6_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t6_req_vld,4))) && ($0in_delay(sii_l2t6_req[24] == 0,4)) && ($0in_delay(sii_l2t6_req[25] == 0,4)) && ($0in_delay(sii_l2t6_req[26] == 1,4)) && ($0in_rising_edge($0in_delay(l2t6_sii_iq_dequeue,4))) && !(sii_wri_ecc1_l6_cycle3 == sii_l2b6_ecc[1]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc1_l6_wri_cycle3
*/

wire sii_wri_ecc2_l6_cycle3 =  (`TOP.cpu.sii_l2t6_req[1] ^ `TOP.cpu.sii_l2t6_req[2] ^ `TOP.cpu.sii_l2t6_req[3] ^ `TOP.cpu.sii_l2t6_req[7] ^ `TOP.cpu.sii_l2t6_req[8] ^ `TOP.cpu.sii_l2t6_req[9] ^ `TOP.cpu.sii_l2t6_req[10] ^ `TOP.cpu.sii_l2t6_req[14] ^ `TOP.cpu.sii_l2t6_req[15] ^ `TOP.cpu.sii_l2t6_req[16] ^ `TOP.cpu.sii_l2t6_req[17] ^ `TOP.cpu.sii_l2t6_req[22] ^ `TOP.cpu.sii_l2t6_req[23] ^ `TOP.cpu.sii_l2t6_req[24] ^ `TOP.cpu.sii_l2t6_req[25] ^ `TOP.cpu.sii_l2t6_req[29] ^ `TOP.cpu.sii_l2t6_req[30] ^ `TOP.cpu.sii_l2t6_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t6_req_vld,4))) && ($0in_delay(sii_l2t6_req[24] == 0,4)) && ($0in_delay(sii_l2t6_req[25] == 0,4)) && ($0in_delay(sii_l2t6_req[26] == 1,4)) && ($0in_rising_edge($0in_delay(l2t6_sii_iq_dequeue,4))) && !(sii_wri_ecc2_l6_cycle3 == sii_l2b6_ecc[2]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc2_l6_wri_cycle3
*/

wire sii_wri_ecc3_l6_cycle3 =  (`TOP.cpu.sii_l2t6_req[4] ^ `TOP.cpu.sii_l2t6_req[5] ^ `TOP.cpu.sii_l2t6_req[6] ^ `TOP.cpu.sii_l2t6_req[7] ^ `TOP.cpu.sii_l2t6_req[8] ^ `TOP.cpu.sii_l2t6_req[9] ^ `TOP.cpu.sii_l2t6_req[10] ^ `TOP.cpu.sii_l2t6_req[18] ^ `TOP.cpu.sii_l2t6_req[19] ^ `TOP.cpu.sii_l2t6_req[20] ^ `TOP.cpu.sii_l2t6_req[21] ^ `TOP.cpu.sii_l2t6_req[22] ^ `TOP.cpu.sii_l2t6_req[23] ^ `TOP.cpu.sii_l2t6_req[24] ^ `TOP.cpu.sii_l2t6_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t6_req_vld,4))) && ($0in_delay(sii_l2t6_req[24] == 0,4)) && ($0in_delay(sii_l2t6_req[25] == 0,4)) && ($0in_delay(sii_l2t6_req[26] == 1,4)) && ($0in_rising_edge($0in_delay(l2t6_sii_iq_dequeue,4))) && !(sii_wri_ecc3_l6_cycle3 == sii_l2b6_ecc[3]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc3_l6_wri_cycle3
*/

wire sii_wri_ecc4_l6_cycle3 =  ( `TOP.cpu.sii_l2t6_req[11] ^ `TOP.cpu.sii_l2t6_req[12] ^ `TOP.cpu.sii_l2t6_req[13] ^ `TOP.cpu.sii_l2t6_req[14] ^ `TOP.cpu.sii_l2t6_req[15] ^ `TOP.cpu.sii_l2t6_req[16] ^ `TOP.cpu.sii_l2t6_req[17] ^ `TOP.cpu.sii_l2t6_req[18] ^ `TOP.cpu.sii_l2t6_req[19] ^ `TOP.cpu.sii_l2t6_req[20] ^ `TOP.cpu.sii_l2t6_req[21] ^ `TOP.cpu.sii_l2t6_req[22] ^ `TOP.cpu.sii_l2t6_req[23] ^ `TOP.cpu.sii_l2t6_req[24] ^ `TOP.cpu.sii_l2t6_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t6_req_vld,4))) && ($0in_delay(sii_l2t6_req[24] == 0,4)) && ($0in_delay(sii_l2t6_req[25] == 0,4)) && ($0in_delay(sii_l2t6_req[26] == 1,4)) && ($0in_rising_edge($0in_delay(l2t6_sii_iq_dequeue,4))) && !(sii_wri_ecc4_l6_cycle3 == sii_l2b6_ecc[4]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc4_l6_wri_cycle3
*/

wire sii_wri_ecc5_l6_cycle3 =  (`TOP.cpu.sii_l2t6_req[26] ^ `TOP.cpu.sii_l2t6_req[27] ^ `TOP.cpu.sii_l2t6_req[28] ^ `TOP.cpu.sii_l2t6_req[29] ^ `TOP.cpu.sii_l2t6_req[30] ^ `TOP.cpu.sii_l2t6_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t6_req_vld,4))) && ($0in_delay(sii_l2t6_req[24] == 0,4)) && ($0in_delay(sii_l2t6_req[25] == 0,4)) && ($0in_delay(sii_l2t6_req[26] == 1,4)) && ($0in_rising_edge($0in_delay(l2t6_sii_iq_dequeue,4))) && !(sii_wri_ecc5_l6_cycle3 == sii_l2b6_ecc[5]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc5_l6_wri_cycle3
*/

wire sii_wri_ecc6_l6_cycle3 =  (`TOP.cpu.sii_l2t6_req[0] ^ `TOP.cpu.sii_l2t6_req[1] ^ `TOP.cpu.sii_l2t6_req[2] ^ `TOP.cpu.sii_l2t6_req[4] ^ `TOP.cpu.sii_l2t6_req[5] ^ `TOP.cpu.sii_l2t6_req[7] ^ `TOP.cpu.sii_l2t6_req[10] ^ `TOP.cpu.sii_l2t6_req[11] ^ `TOP.cpu.sii_l2t6_req[12] ^ `TOP.cpu.sii_l2t6_req[14] ^ `TOP.cpu.sii_l2t6_req[17] ^ `TOP.cpu.sii_l2t6_req[18] ^ `TOP.cpu.sii_l2t6_req[21] ^ `TOP.cpu.sii_l2t6_req[23] ^ `TOP.cpu.sii_l2t6_req[24] ^ `TOP.cpu.sii_l2t6_req[26] ^ `TOP.cpu.sii_l2t6_req[27] ^ `TOP.cpu.sii_l2t6_req[29] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t6_req_vld,4))) && ($0in_delay(sii_l2t6_req[24] == 0,4)) && ($0in_delay(sii_l2t6_req[25] == 0,2)) && ($0in_delay(sii_l2t6_req[26] == 1,4)) && ($0in_rising_edge($0in_delay(l2t6_sii_iq_dequeue,4))) && !(sii_wri_ecc6_l6_cycle3 == sii_l2b6_ecc[6]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc6_l6_wri_cycle3
*/

wire sii_wri_ecc0_l6_cycle4 =  (`TOP.cpu.sii_l2t6_req[0] ^ `TOP.cpu.sii_l2t6_req[1] ^ `TOP.cpu.sii_l2t6_req[3] ^ `TOP.cpu.sii_l2t6_req[4] ^ `TOP.cpu.sii_l2t6_req[6] ^ `TOP.cpu.sii_l2t6_req[8] ^ `TOP.cpu.sii_l2t6_req[10] ^ `TOP.cpu.sii_l2t6_req[11] ^ `TOP.cpu.sii_l2t6_req[13] ^ `TOP.cpu.sii_l2t6_req[15] ^ `TOP.cpu.sii_l2t6_req[17] ^ `TOP.cpu.sii_l2t6_req[19] ^ `TOP.cpu.sii_l2t6_req[21] ^ `TOP.cpu.sii_l2t6_req[23] ^ `TOP.cpu.sii_l2t6_req[25] ^ `TOP.cpu.sii_l2t6_req[26] ^ `TOP.cpu.sii_l2t6_req[28] ^ `TOP.cpu.sii_l2t6_req[30] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t6_req_vld,5))) && ($0in_delay(sii_l2t6_req[24] == 0,5)) && ($0in_delay(sii_l2t6_req[25] == 0,5)) && ($0in_delay(sii_l2t6_req[26] == 1,5)) && ($0in_rising_edge($0in_delay(l2t6_sii_iq_dequeue,5))) && !(sii_wri_ecc0_l6_cycle4 == sii_l2b6_ecc[0]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc0_l6_wri_cycle4
*/

wire sii_wri_ecc1_l6_cycle4 =  (`TOP.cpu.sii_l2t6_req[0] ^ `TOP.cpu.sii_l2t6_req[2] ^ `TOP.cpu.sii_l2t6_req[3] ^ `TOP.cpu.sii_l2t6_req[5] ^ `TOP.cpu.sii_l2t6_req[6] ^ `TOP.cpu.sii_l2t6_req[9] ^ `TOP.cpu.sii_l2t6_req[10] ^ `TOP.cpu.sii_l2t6_req[12] ^ `TOP.cpu.sii_l2t6_req[13] ^ `TOP.cpu.sii_l2t6_req[16] ^ `TOP.cpu.sii_l2t6_req[17] ^ `TOP.cpu.sii_l2t6_req[20] ^ `TOP.cpu.sii_l2t6_req[21] ^ `TOP.cpu.sii_l2t6_req[24] ^ `TOP.cpu.sii_l2t6_req[25] ^ `TOP.cpu.sii_l2t6_req[27] ^ `TOP.cpu.sii_l2t6_req[28] ^ `TOP.cpu.sii_l2t6_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t6_req_vld,5))) && ($0in_delay(sii_l2t6_req[24] == 0,5)) && ($0in_delay(sii_l2t6_req[25] == 0,5)) && ($0in_delay(sii_l2t6_req[26] == 1,5)) && ($0in_rising_edge($0in_delay(l2t6_sii_iq_dequeue,5))) && !(sii_wri_ecc1_l6_cycle4 == sii_l2b6_ecc[1]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc1_l6_wri_cycle4
*/

wire sii_wri_ecc2_l6_cycle4 =  (`TOP.cpu.sii_l2t6_req[1] ^ `TOP.cpu.sii_l2t6_req[2] ^ `TOP.cpu.sii_l2t6_req[3] ^ `TOP.cpu.sii_l2t6_req[7] ^ `TOP.cpu.sii_l2t6_req[8] ^ `TOP.cpu.sii_l2t6_req[9] ^ `TOP.cpu.sii_l2t6_req[10] ^ `TOP.cpu.sii_l2t6_req[14] ^ `TOP.cpu.sii_l2t6_req[15] ^ `TOP.cpu.sii_l2t6_req[16] ^ `TOP.cpu.sii_l2t6_req[17] ^ `TOP.cpu.sii_l2t6_req[22] ^ `TOP.cpu.sii_l2t6_req[23] ^ `TOP.cpu.sii_l2t6_req[24] ^ `TOP.cpu.sii_l2t6_req[25] ^ `TOP.cpu.sii_l2t6_req[29] ^ `TOP.cpu.sii_l2t6_req[30] ^ `TOP.cpu.sii_l2t6_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t6_req_vld,5))) && ($0in_delay(sii_l2t6_req[24] == 0,5)) && ($0in_delay(sii_l2t6_req[25] == 0,5)) && ($0in_delay(sii_l2t6_req[26] == 1,5)) && ($0in_rising_edge($0in_delay(l2t6_sii_iq_dequeue,5))) && !(sii_wri_ecc2_l6_cycle4 == sii_l2b6_ecc[2]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc2_l6_wri_cycle4
*/

wire sii_wri_ecc3_l6_cycle4 =  (`TOP.cpu.sii_l2t6_req[4] ^ `TOP.cpu.sii_l2t6_req[5] ^ `TOP.cpu.sii_l2t6_req[6] ^ `TOP.cpu.sii_l2t6_req[7] ^ `TOP.cpu.sii_l2t6_req[8] ^ `TOP.cpu.sii_l2t6_req[9] ^ `TOP.cpu.sii_l2t6_req[10] ^ `TOP.cpu.sii_l2t6_req[18] ^ `TOP.cpu.sii_l2t6_req[19] ^ `TOP.cpu.sii_l2t6_req[20] ^ `TOP.cpu.sii_l2t6_req[21] ^ `TOP.cpu.sii_l2t6_req[22] ^ `TOP.cpu.sii_l2t6_req[23] ^ `TOP.cpu.sii_l2t6_req[24] ^ `TOP.cpu.sii_l2t6_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t6_req_vld,5))) && ($0in_delay(sii_l2t6_req[24] == 0,5)) && ($0in_delay(sii_l2t6_req[25] == 0,5)) && ($0in_delay(sii_l2t6_req[26] == 1,5)) && ($0in_rising_edge($0in_delay(l2t6_sii_iq_dequeue,5))) && !(sii_wri_ecc3_l6_cycle4 == sii_l2b6_ecc[3]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc3_l6_wri_cycle4
*/

wire sii_wri_ecc4_l6_cycle4 =  ( `TOP.cpu.sii_l2t6_req[11] ^ `TOP.cpu.sii_l2t6_req[12] ^ `TOP.cpu.sii_l2t6_req[13] ^ `TOP.cpu.sii_l2t6_req[14] ^ `TOP.cpu.sii_l2t6_req[15] ^ `TOP.cpu.sii_l2t6_req[16] ^ `TOP.cpu.sii_l2t6_req[17] ^ `TOP.cpu.sii_l2t6_req[18] ^ `TOP.cpu.sii_l2t6_req[19] ^ `TOP.cpu.sii_l2t6_req[20] ^ `TOP.cpu.sii_l2t6_req[21] ^ `TOP.cpu.sii_l2t6_req[22] ^ `TOP.cpu.sii_l2t6_req[23] ^ `TOP.cpu.sii_l2t6_req[24] ^ `TOP.cpu.sii_l2t6_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t6_req_vld,5))) && ($0in_delay(sii_l2t6_req[24] == 0,5)) && ($0in_delay(sii_l2t6_req[25] == 0,5)) && ($0in_delay(sii_l2t6_req[26] == 1,5)) && ($0in_rising_edge($0in_delay(l2t6_sii_iq_dequeue,5))) && !(sii_wri_ecc4_l6_cycle4 == sii_l2b6_ecc[4]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc4_l6_wri_cycle4
*/

wire sii_wri_ecc5_l6_cycle4 =  (`TOP.cpu.sii_l2t6_req[26] ^ `TOP.cpu.sii_l2t6_req[27] ^ `TOP.cpu.sii_l2t6_req[28] ^ `TOP.cpu.sii_l2t6_req[29] ^ `TOP.cpu.sii_l2t6_req[30] ^ `TOP.cpu.sii_l2t6_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t6_req_vld,5))) && ($0in_delay(sii_l2t6_req[24] == 0,5)) && ($0in_delay(sii_l2t6_req[25] == 0,5)) && ($0in_delay(sii_l2t6_req[26] == 1,5)) && ($0in_rising_edge($0in_delay(l2t6_sii_iq_dequeue,5))) && !(sii_wri_ecc5_l6_cycle4 == sii_l2b6_ecc[5]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc5_l6_wri_cycle4
*/

wire sii_wri_ecc6_l6_cycle4 =  (`TOP.cpu.sii_l2t6_req[0] ^ `TOP.cpu.sii_l2t6_req[1] ^ `TOP.cpu.sii_l2t6_req[2] ^ `TOP.cpu.sii_l2t6_req[4] ^ `TOP.cpu.sii_l2t6_req[5] ^ `TOP.cpu.sii_l2t6_req[7] ^ `TOP.cpu.sii_l2t6_req[10] ^ `TOP.cpu.sii_l2t6_req[11] ^ `TOP.cpu.sii_l2t6_req[12] ^ `TOP.cpu.sii_l2t6_req[14] ^ `TOP.cpu.sii_l2t6_req[17] ^ `TOP.cpu.sii_l2t6_req[18] ^ `TOP.cpu.sii_l2t6_req[21] ^ `TOP.cpu.sii_l2t6_req[23] ^ `TOP.cpu.sii_l2t6_req[24] ^ `TOP.cpu.sii_l2t6_req[26] ^ `TOP.cpu.sii_l2t6_req[27] ^ `TOP.cpu.sii_l2t6_req[29] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t6_req_vld,5))) && ($0in_delay(sii_l2t6_req[24] == 0,5)) && ($0in_delay(sii_l2t6_req[25] == 0,5)) && ($0in_delay(sii_l2t6_req[26] == 1,5)) && ($0in_rising_edge($0in_delay(l2t6_sii_iq_dequeue,5))) && !(sii_wri_ecc6_l6_cycle4 == sii_l2b6_ecc[6]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc6_l6_wri_cycle4
*/

wire sii_wri_ecc0_l6_cycle5 =  (`TOP.cpu.sii_l2t6_req[0] ^ `TOP.cpu.sii_l2t6_req[1] ^ `TOP.cpu.sii_l2t6_req[3] ^ `TOP.cpu.sii_l2t6_req[4] ^ `TOP.cpu.sii_l2t6_req[6] ^ `TOP.cpu.sii_l2t6_req[8] ^ `TOP.cpu.sii_l2t6_req[10] ^ `TOP.cpu.sii_l2t6_req[11] ^ `TOP.cpu.sii_l2t6_req[13] ^ `TOP.cpu.sii_l2t6_req[15] ^ `TOP.cpu.sii_l2t6_req[17] ^ `TOP.cpu.sii_l2t6_req[19] ^ `TOP.cpu.sii_l2t6_req[21] ^ `TOP.cpu.sii_l2t6_req[23] ^ `TOP.cpu.sii_l2t6_req[25] ^ `TOP.cpu.sii_l2t6_req[26] ^ `TOP.cpu.sii_l2t6_req[28] ^ `TOP.cpu.sii_l2t6_req[30] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t6_req_vld,6))) && ($0in_delay(sii_l2t6_req[24] == 0,6)) && ($0in_delay(sii_l2t6_req[25] == 0,6)) && ($0in_delay(sii_l2t6_req[26] == 1,6)) && ($0in_rising_edge($0in_delay(l2t6_sii_iq_dequeue,6))) && !(sii_wri_ecc0_l6_cycle5 == sii_l2b6_ecc[0]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc0_l6_wri_cycle5
*/

wire sii_wri_ecc1_l6_cycle5 =  (`TOP.cpu.sii_l2t6_req[0] ^ `TOP.cpu.sii_l2t6_req[2] ^ `TOP.cpu.sii_l2t6_req[3] ^ `TOP.cpu.sii_l2t6_req[5] ^ `TOP.cpu.sii_l2t6_req[6] ^ `TOP.cpu.sii_l2t6_req[9] ^ `TOP.cpu.sii_l2t6_req[10] ^ `TOP.cpu.sii_l2t6_req[12] ^ `TOP.cpu.sii_l2t6_req[13] ^ `TOP.cpu.sii_l2t6_req[16] ^ `TOP.cpu.sii_l2t6_req[17] ^ `TOP.cpu.sii_l2t6_req[20] ^ `TOP.cpu.sii_l2t6_req[21] ^ `TOP.cpu.sii_l2t6_req[24] ^ `TOP.cpu.sii_l2t6_req[25] ^ `TOP.cpu.sii_l2t6_req[27] ^ `TOP.cpu.sii_l2t6_req[28] ^ `TOP.cpu.sii_l2t6_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t6_req_vld,6))) && ($0in_delay(sii_l2t6_req[24] == 0,6)) && ($0in_delay(sii_l2t6_req[25] == 0,6)) && ($0in_delay(sii_l2t6_req[26] == 1,6)) && ($0in_rising_edge($0in_delay(l2t6_sii_iq_dequeue,6))) && !(sii_wri_ecc1_l6_cycle5 == sii_l2b6_ecc[1]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc1_l6_wri_cycle5
*/

wire sii_wri_ecc2_l6_cycle5 =  (`TOP.cpu.sii_l2t6_req[1] ^ `TOP.cpu.sii_l2t6_req[2] ^ `TOP.cpu.sii_l2t6_req[3] ^ `TOP.cpu.sii_l2t6_req[7] ^ `TOP.cpu.sii_l2t6_req[8] ^ `TOP.cpu.sii_l2t6_req[9] ^ `TOP.cpu.sii_l2t6_req[10] ^ `TOP.cpu.sii_l2t6_req[14] ^ `TOP.cpu.sii_l2t6_req[15] ^ `TOP.cpu.sii_l2t6_req[16] ^ `TOP.cpu.sii_l2t6_req[17] ^ `TOP.cpu.sii_l2t6_req[22] ^ `TOP.cpu.sii_l2t6_req[23] ^ `TOP.cpu.sii_l2t6_req[24] ^ `TOP.cpu.sii_l2t6_req[25] ^ `TOP.cpu.sii_l2t6_req[29] ^ `TOP.cpu.sii_l2t6_req[30] ^ `TOP.cpu.sii_l2t6_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t6_req_vld,6))) && ($0in_delay(sii_l2t6_req[24] == 0,6)) && ($0in_delay(sii_l2t6_req[25] == 0,6)) && ($0in_delay(sii_l2t6_req[26] == 1,6)) && ($0in_rising_edge($0in_delay(l2t6_sii_iq_dequeue,6))) && !(sii_wri_ecc2_l6_cycle5 == sii_l2b6_ecc[2]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc2_l6_wri_cycle5
*/

wire sii_wri_ecc3_l6_cycle5 =  (`TOP.cpu.sii_l2t6_req[4] ^ `TOP.cpu.sii_l2t6_req[5] ^ `TOP.cpu.sii_l2t6_req[6] ^ `TOP.cpu.sii_l2t6_req[7] ^ `TOP.cpu.sii_l2t6_req[8] ^ `TOP.cpu.sii_l2t6_req[9] ^ `TOP.cpu.sii_l2t6_req[10] ^ `TOP.cpu.sii_l2t6_req[18] ^ `TOP.cpu.sii_l2t6_req[19] ^ `TOP.cpu.sii_l2t6_req[20] ^ `TOP.cpu.sii_l2t6_req[21] ^ `TOP.cpu.sii_l2t6_req[22] ^ `TOP.cpu.sii_l2t6_req[23] ^ `TOP.cpu.sii_l2t6_req[24] ^ `TOP.cpu.sii_l2t6_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t6_req_vld,6))) && ($0in_delay(sii_l2t6_req[24] == 0,6)) && ($0in_delay(sii_l2t6_req[25] == 0,6)) && ($0in_delay(sii_l2t6_req[26] == 1,6)) && ($0in_rising_edge($0in_delay(l2t6_sii_iq_dequeue,6))) && !(sii_wri_ecc3_l6_cycle5 == sii_l2b6_ecc[3]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc3_l6_wri_cycle5
*/

wire sii_wri_ecc4_l6_cycle5 =  ( `TOP.cpu.sii_l2t6_req[11] ^ `TOP.cpu.sii_l2t6_req[12] ^ `TOP.cpu.sii_l2t6_req[13] ^ `TOP.cpu.sii_l2t6_req[14] ^ `TOP.cpu.sii_l2t6_req[15] ^ `TOP.cpu.sii_l2t6_req[16] ^ `TOP.cpu.sii_l2t6_req[17] ^ `TOP.cpu.sii_l2t6_req[18] ^ `TOP.cpu.sii_l2t6_req[19] ^ `TOP.cpu.sii_l2t6_req[20] ^ `TOP.cpu.sii_l2t6_req[21] ^ `TOP.cpu.sii_l2t6_req[22] ^ `TOP.cpu.sii_l2t6_req[23] ^ `TOP.cpu.sii_l2t6_req[24] ^ `TOP.cpu.sii_l2t6_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t6_req_vld,6))) && ($0in_delay(sii_l2t6_req[24] == 0,6)) && ($0in_delay(sii_l2t6_req[25] == 0,6)) && ($0in_delay(sii_l2t6_req[26] == 1,6)) && ($0in_rising_edge($0in_delay(l2t6_sii_iq_dequeue,6))) && !(sii_wri_ecc4_l6_cycle5 == sii_l2b6_ecc[4]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc4_l6_wri_cycle5
*/

wire sii_wri_ecc5_l6_cycle5 =  (`TOP.cpu.sii_l2t6_req[26] ^ `TOP.cpu.sii_l2t6_req[27] ^ `TOP.cpu.sii_l2t6_req[28] ^ `TOP.cpu.sii_l2t6_req[29] ^ `TOP.cpu.sii_l2t6_req[30] ^ `TOP.cpu.sii_l2t6_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t6_req_vld,6))) && ($0in_delay(sii_l2t6_req[24] == 0,6)) && ($0in_delay(sii_l2t6_req[25] == 0,2)) && ($0in_delay(sii_l2t6_req[26] == 1,6)) && ($0in_rising_edge($0in_delay(l2t6_sii_iq_dequeue,6))) && !(sii_wri_ecc5_l6_cycle5 == sii_l2b6_ecc[5]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc5_l6_wri_cycle5
*/

wire sii_wri_ecc6_l6_cycle5 =  (`TOP.cpu.sii_l2t6_req[0] ^ `TOP.cpu.sii_l2t6_req[1] ^ `TOP.cpu.sii_l2t6_req[2] ^ `TOP.cpu.sii_l2t6_req[4] ^ `TOP.cpu.sii_l2t6_req[5] ^ `TOP.cpu.sii_l2t6_req[7] ^ `TOP.cpu.sii_l2t6_req[10] ^ `TOP.cpu.sii_l2t6_req[11] ^ `TOP.cpu.sii_l2t6_req[12] ^ `TOP.cpu.sii_l2t6_req[14] ^ `TOP.cpu.sii_l2t6_req[17] ^ `TOP.cpu.sii_l2t6_req[18] ^ `TOP.cpu.sii_l2t6_req[21] ^ `TOP.cpu.sii_l2t6_req[23] ^ `TOP.cpu.sii_l2t6_req[24] ^ `TOP.cpu.sii_l2t6_req[26] ^ `TOP.cpu.sii_l2t6_req[27] ^ `TOP.cpu.sii_l2t6_req[29] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t6_req_vld,6))) && ($0in_delay(sii_l2t6_req[24] == 0,6)) && ($0in_delay(sii_l2t6_req[25] == 0,6)) && ($0in_delay(sii_l2t6_req[26] == 1,6)) && ($0in_rising_edge($0in_delay(l2t6_sii_iq_dequeue,6))) && !(sii_wri_ecc6_l6_cycle5 == sii_l2b6_ecc[6]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc6_l6_wri_cycle5
*/

wire sii_wri_ecc0_l6_cycle6 =  (`TOP.cpu.sii_l2t6_req[0] ^ `TOP.cpu.sii_l2t6_req[1] ^ `TOP.cpu.sii_l2t6_req[3] ^ `TOP.cpu.sii_l2t6_req[4] ^ `TOP.cpu.sii_l2t6_req[6] ^ `TOP.cpu.sii_l2t6_req[8] ^ `TOP.cpu.sii_l2t6_req[10] ^ `TOP.cpu.sii_l2t6_req[11] ^ `TOP.cpu.sii_l2t6_req[13] ^ `TOP.cpu.sii_l2t6_req[15] ^ `TOP.cpu.sii_l2t6_req[17] ^ `TOP.cpu.sii_l2t6_req[19] ^ `TOP.cpu.sii_l2t6_req[21] ^ `TOP.cpu.sii_l2t6_req[23] ^ `TOP.cpu.sii_l2t6_req[25] ^ `TOP.cpu.sii_l2t6_req[26] ^ `TOP.cpu.sii_l2t6_req[28] ^ `TOP.cpu.sii_l2t6_req[30] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t6_req_vld,7))) && ($0in_delay(sii_l2t6_req[24] == 0,7)) && ($0in_delay(sii_l2t6_req[25] == 0,7)) && ($0in_delay(sii_l2t6_req[26] == 1,7)) && ($0in_rising_edge($0in_delay(l2t6_sii_iq_dequeue,7))) && !(sii_wri_ecc0_l6_cycle6 == sii_l2b6_ecc[0]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc0_l6_wri_cycle6
*/

wire sii_wri_ecc1_l6_cycle6 =  (`TOP.cpu.sii_l2t6_req[0] ^ `TOP.cpu.sii_l2t6_req[2] ^ `TOP.cpu.sii_l2t6_req[3] ^ `TOP.cpu.sii_l2t6_req[5] ^ `TOP.cpu.sii_l2t6_req[6] ^ `TOP.cpu.sii_l2t6_req[9] ^ `TOP.cpu.sii_l2t6_req[10] ^ `TOP.cpu.sii_l2t6_req[12] ^ `TOP.cpu.sii_l2t6_req[13] ^ `TOP.cpu.sii_l2t6_req[16] ^ `TOP.cpu.sii_l2t6_req[17] ^ `TOP.cpu.sii_l2t6_req[20] ^ `TOP.cpu.sii_l2t6_req[21] ^ `TOP.cpu.sii_l2t6_req[24] ^ `TOP.cpu.sii_l2t6_req[25] ^ `TOP.cpu.sii_l2t6_req[27] ^ `TOP.cpu.sii_l2t6_req[28] ^ `TOP.cpu.sii_l2t6_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t6_req_vld,7))) && ($0in_delay(sii_l2t6_req[24] == 0,7)) && ($0in_delay(sii_l2t6_req[25] == 0,7)) && ($0in_delay(sii_l2t6_req[26] == 1,7)) && ($0in_rising_edge($0in_delay(l2t6_sii_iq_dequeue,7))) && !(sii_wri_ecc1_l6_cycle6 == sii_l2b6_ecc[1]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc1_l6_wri_cycle6
*/

wire sii_wri_ecc2_l6_cycle6 =  (`TOP.cpu.sii_l2t6_req[1] ^ `TOP.cpu.sii_l2t6_req[2] ^ `TOP.cpu.sii_l2t6_req[3] ^ `TOP.cpu.sii_l2t6_req[7] ^ `TOP.cpu.sii_l2t6_req[8] ^ `TOP.cpu.sii_l2t6_req[9] ^ `TOP.cpu.sii_l2t6_req[10] ^ `TOP.cpu.sii_l2t6_req[14] ^ `TOP.cpu.sii_l2t6_req[15] ^ `TOP.cpu.sii_l2t6_req[16] ^ `TOP.cpu.sii_l2t6_req[17] ^ `TOP.cpu.sii_l2t6_req[22] ^ `TOP.cpu.sii_l2t6_req[23] ^ `TOP.cpu.sii_l2t6_req[24] ^ `TOP.cpu.sii_l2t6_req[25] ^ `TOP.cpu.sii_l2t6_req[29] ^ `TOP.cpu.sii_l2t6_req[30] ^ `TOP.cpu.sii_l2t6_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t6_req_vld,7))) && ($0in_delay(sii_l2t6_req[24] == 0,7)) && ($0in_delay(sii_l2t6_req[25] == 0,7)) && ($0in_delay(sii_l2t6_req[26] == 1,7)) && ($0in_rising_edge($0in_delay(l2t6_sii_iq_dequeue,7))) && !(sii_wri_ecc2_l6_cycle6 == sii_l2b6_ecc[2]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc2_l6_wri_cycle6
*/

wire sii_wri_ecc3_l6_cycle6 =  (`TOP.cpu.sii_l2t6_req[4] ^ `TOP.cpu.sii_l2t6_req[5] ^ `TOP.cpu.sii_l2t6_req[6] ^ `TOP.cpu.sii_l2t6_req[7] ^ `TOP.cpu.sii_l2t6_req[8] ^ `TOP.cpu.sii_l2t6_req[9] ^ `TOP.cpu.sii_l2t6_req[10] ^ `TOP.cpu.sii_l2t6_req[18] ^ `TOP.cpu.sii_l2t6_req[19] ^ `TOP.cpu.sii_l2t6_req[20] ^ `TOP.cpu.sii_l2t6_req[21] ^ `TOP.cpu.sii_l2t6_req[22] ^ `TOP.cpu.sii_l2t6_req[23] ^ `TOP.cpu.sii_l2t6_req[24] ^ `TOP.cpu.sii_l2t6_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t6_req_vld,7))) && ($0in_delay(sii_l2t6_req[24] == 0,7)) && ($0in_delay(sii_l2t6_req[25] == 0,7)) && ($0in_delay(sii_l2t6_req[26] == 1,7)) && ($0in_rising_edge($0in_delay(l2t6_sii_iq_dequeue,7))) && !(sii_wri_ecc3_l6_cycle6 == sii_l2b6_ecc[3]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc3_l6_wri_cycle6
*/

wire sii_wri_ecc4_l6_cycle6 =  ( `TOP.cpu.sii_l2t6_req[11] ^ `TOP.cpu.sii_l2t6_req[12] ^ `TOP.cpu.sii_l2t6_req[13] ^ `TOP.cpu.sii_l2t6_req[14] ^ `TOP.cpu.sii_l2t6_req[15] ^ `TOP.cpu.sii_l2t6_req[16] ^ `TOP.cpu.sii_l2t6_req[17] ^ `TOP.cpu.sii_l2t6_req[18] ^ `TOP.cpu.sii_l2t6_req[19] ^ `TOP.cpu.sii_l2t6_req[20] ^ `TOP.cpu.sii_l2t6_req[21] ^ `TOP.cpu.sii_l2t6_req[22] ^ `TOP.cpu.sii_l2t6_req[23] ^ `TOP.cpu.sii_l2t6_req[24] ^ `TOP.cpu.sii_l2t6_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t6_req_vld,7))) && ($0in_delay(sii_l2t6_req[24] == 0,7)) && ($0in_delay(sii_l2t6_req[25] == 0,7)) && ($0in_delay(sii_l2t6_req[26] == 1,7)) && ($0in_rising_edge($0in_delay(l2t6_sii_iq_dequeue,7))) && !(sii_wri_ecc4_l6_cycle6 == sii_l2b6_ecc[4]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc4_l6_wri_cycle6
*/

wire sii_wri_ecc5_l6_cycle6 =  (`TOP.cpu.sii_l2t6_req[26] ^ `TOP.cpu.sii_l2t6_req[27] ^ `TOP.cpu.sii_l2t6_req[28] ^ `TOP.cpu.sii_l2t6_req[29] ^ `TOP.cpu.sii_l2t6_req[30] ^ `TOP.cpu.sii_l2t6_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t6_req_vld,7))) && ($0in_delay(sii_l2t6_req[24] == 0,7)) && ($0in_delay(sii_l2t6_req[25] == 0,7)) && ($0in_delay(sii_l2t6_req[26] == 1,7)) && ($0in_rising_edge($0in_delay(l2t6_sii_iq_dequeue,7))) && !(sii_wri_ecc5_l6_cycle6 == sii_l2b6_ecc[5]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc5_l6_wri_cycle6
*/

wire sii_wri_ecc6_l6_cycle6 =  (`TOP.cpu.sii_l2t6_req[0] ^ `TOP.cpu.sii_l2t6_req[1] ^ `TOP.cpu.sii_l2t6_req[2] ^ `TOP.cpu.sii_l2t6_req[4] ^ `TOP.cpu.sii_l2t6_req[5] ^ `TOP.cpu.sii_l2t6_req[7] ^ `TOP.cpu.sii_l2t6_req[10] ^ `TOP.cpu.sii_l2t6_req[11] ^ `TOP.cpu.sii_l2t6_req[12] ^ `TOP.cpu.sii_l2t6_req[14] ^ `TOP.cpu.sii_l2t6_req[17] ^ `TOP.cpu.sii_l2t6_req[18] ^ `TOP.cpu.sii_l2t6_req[21] ^ `TOP.cpu.sii_l2t6_req[23] ^ `TOP.cpu.sii_l2t6_req[24] ^ `TOP.cpu.sii_l2t6_req[26] ^ `TOP.cpu.sii_l2t6_req[27] ^ `TOP.cpu.sii_l2t6_req[29] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t6_req_vld,7))) && ($0in_delay(sii_l2t6_req[24] == 0,7)) && ($0in_delay(sii_l2t6_req[25] == 0,7)) && ($0in_delay(sii_l2t6_req[26] == 1,7)) && ($0in_rising_edge($0in_delay(l2t6_sii_iq_dequeue,7))) && !(sii_wri_ecc6_l6_cycle6 == sii_l2b6_ecc[6]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc6_l6_wri_cycle6
*/

wire sii_wri_ecc0_l6_cycle7 =  (`TOP.cpu.sii_l2t6_req[0] ^ `TOP.cpu.sii_l2t6_req[1] ^ `TOP.cpu.sii_l2t6_req[3] ^ `TOP.cpu.sii_l2t6_req[4] ^ `TOP.cpu.sii_l2t6_req[6] ^ `TOP.cpu.sii_l2t6_req[8] ^ `TOP.cpu.sii_l2t6_req[10] ^ `TOP.cpu.sii_l2t6_req[11] ^ `TOP.cpu.sii_l2t6_req[13] ^ `TOP.cpu.sii_l2t6_req[15] ^ `TOP.cpu.sii_l2t6_req[17] ^ `TOP.cpu.sii_l2t6_req[19] ^ `TOP.cpu.sii_l2t6_req[21] ^ `TOP.cpu.sii_l2t6_req[23] ^ `TOP.cpu.sii_l2t6_req[25] ^ `TOP.cpu.sii_l2t6_req[26] ^ `TOP.cpu.sii_l2t6_req[28] ^ `TOP.cpu.sii_l2t6_req[30] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t6_req_vld,8))) && ($0in_delay(sii_l2t6_req[24] == 0,8)) && ($0in_delay(sii_l2t6_req[25] == 0,8)) && ($0in_delay(sii_l2t6_req[26] == 1,8)) && ($0in_rising_edge($0in_delay(l2t6_sii_iq_dequeue,8))) && !(sii_wri_ecc0_l6_cycle7 == sii_l2b6_ecc[0]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc0_l6_wri_cycle7
*/

wire sii_wri_ecc1_l6_cycle7 =  (`TOP.cpu.sii_l2t6_req[0] ^ `TOP.cpu.sii_l2t6_req[2] ^ `TOP.cpu.sii_l2t6_req[3] ^ `TOP.cpu.sii_l2t6_req[5] ^ `TOP.cpu.sii_l2t6_req[6] ^ `TOP.cpu.sii_l2t6_req[9] ^ `TOP.cpu.sii_l2t6_req[10] ^ `TOP.cpu.sii_l2t6_req[12] ^ `TOP.cpu.sii_l2t6_req[13] ^ `TOP.cpu.sii_l2t6_req[16] ^ `TOP.cpu.sii_l2t6_req[17] ^ `TOP.cpu.sii_l2t6_req[20] ^ `TOP.cpu.sii_l2t6_req[21] ^ `TOP.cpu.sii_l2t6_req[24] ^ `TOP.cpu.sii_l2t6_req[25] ^ `TOP.cpu.sii_l2t6_req[27] ^ `TOP.cpu.sii_l2t6_req[28] ^ `TOP.cpu.sii_l2t6_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t6_req_vld,8))) && ($0in_delay(sii_l2t6_req[24] == 0,8)) && ($0in_delay(sii_l2t6_req[25] == 0,8)) && ($0in_delay(sii_l2t6_req[26] == 1,8)) && ($0in_rising_edge($0in_delay(l2t6_sii_iq_dequeue,8))) && !(sii_wri_ecc1_l6_cycle7 == sii_l2b6_ecc[1]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc1_l6_wri_cycle7
*/

wire sii_wri_ecc2_l6_cycle7 =  (`TOP.cpu.sii_l2t6_req[1] ^ `TOP.cpu.sii_l2t6_req[2] ^ `TOP.cpu.sii_l2t6_req[3] ^ `TOP.cpu.sii_l2t6_req[7] ^ `TOP.cpu.sii_l2t6_req[8] ^ `TOP.cpu.sii_l2t6_req[9] ^ `TOP.cpu.sii_l2t6_req[10] ^ `TOP.cpu.sii_l2t6_req[14] ^ `TOP.cpu.sii_l2t6_req[15] ^ `TOP.cpu.sii_l2t6_req[16] ^ `TOP.cpu.sii_l2t6_req[17] ^ `TOP.cpu.sii_l2t6_req[22] ^ `TOP.cpu.sii_l2t6_req[23] ^ `TOP.cpu.sii_l2t6_req[24] ^ `TOP.cpu.sii_l2t6_req[25] ^ `TOP.cpu.sii_l2t6_req[29] ^ `TOP.cpu.sii_l2t6_req[30] ^ `TOP.cpu.sii_l2t6_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t6_req_vld,8))) && ($0in_delay(sii_l2t6_req[24] == 0,8)) && ($0in_delay(sii_l2t6_req[25] == 0,8)) && ($0in_delay(sii_l2t6_req[26] == 1,8)) && ($0in_rising_edge($0in_delay(l2t6_sii_iq_dequeue,8))) && !(sii_wri_ecc2_l6_cycle7 == sii_l2b6_ecc[2]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc2_l6_wri_cycle7
*/

wire sii_wri_ecc3_l6_cycle7 =  (`TOP.cpu.sii_l2t6_req[4] ^ `TOP.cpu.sii_l2t6_req[5] ^ `TOP.cpu.sii_l2t6_req[6] ^ `TOP.cpu.sii_l2t6_req[7] ^ `TOP.cpu.sii_l2t6_req[8] ^ `TOP.cpu.sii_l2t6_req[9] ^ `TOP.cpu.sii_l2t6_req[10] ^ `TOP.cpu.sii_l2t6_req[18] ^ `TOP.cpu.sii_l2t6_req[19] ^ `TOP.cpu.sii_l2t6_req[20] ^ `TOP.cpu.sii_l2t6_req[21] ^ `TOP.cpu.sii_l2t6_req[22] ^ `TOP.cpu.sii_l2t6_req[23] ^ `TOP.cpu.sii_l2t6_req[24] ^ `TOP.cpu.sii_l2t6_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t6_req_vld,8))) && ($0in_delay(sii_l2t6_req[24] == 0,8)) && ($0in_delay(sii_l2t6_req[25] == 0,8)) && ($0in_delay(sii_l2t6_req[26] == 1,8)) && ($0in_rising_edge($0in_delay(l2t6_sii_iq_dequeue,8))) && !(sii_wri_ecc3_l6_cycle7 == sii_l2b6_ecc[3]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc3_l6_wri_cycle7
*/

wire sii_wri_ecc4_l6_cycle7 =  ( `TOP.cpu.sii_l2t6_req[11] ^ `TOP.cpu.sii_l2t6_req[12] ^ `TOP.cpu.sii_l2t6_req[13] ^ `TOP.cpu.sii_l2t6_req[14] ^ `TOP.cpu.sii_l2t6_req[15] ^ `TOP.cpu.sii_l2t6_req[16] ^ `TOP.cpu.sii_l2t6_req[17] ^ `TOP.cpu.sii_l2t6_req[18] ^ `TOP.cpu.sii_l2t6_req[19] ^ `TOP.cpu.sii_l2t6_req[20] ^ `TOP.cpu.sii_l2t6_req[21] ^ `TOP.cpu.sii_l2t6_req[22] ^ `TOP.cpu.sii_l2t6_req[23] ^ `TOP.cpu.sii_l2t6_req[24] ^ `TOP.cpu.sii_l2t6_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t6_req_vld,8))) && ($0in_delay(sii_l2t6_req[24] == 0,8)) && ($0in_delay(sii_l2t6_req[25] == 0,8)) && ($0in_delay(sii_l2t6_req[26] == 1,8)) && ($0in_rising_edge($0in_delay(l2t6_sii_iq_dequeue,8))) && !(sii_wri_ecc4_l6_cycle7 == sii_l2b6_ecc[4]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc4_l6_wri_cycle7
*/

wire sii_wri_ecc5_l6_cycle7 =  (`TOP.cpu.sii_l2t6_req[26] ^ `TOP.cpu.sii_l2t6_req[27] ^ `TOP.cpu.sii_l2t6_req[28] ^ `TOP.cpu.sii_l2t6_req[29] ^ `TOP.cpu.sii_l2t6_req[30] ^ `TOP.cpu.sii_l2t6_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t6_req_vld,8))) && ($0in_delay(sii_l2t6_req[24] == 0,8)) && ($0in_delay(sii_l2t6_req[25] == 0,8)) && ($0in_delay(sii_l2t6_req[26] == 1,8)) && ($0in_rising_edge($0in_delay(l2t6_sii_iq_dequeue,8))) && !(sii_wri_ecc5_l6_cycle7 == sii_l2b6_ecc[5]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc5_l6_wri_cycle7
*/

wire sii_wri_ecc6_l6_cycle7 =  (`TOP.cpu.sii_l2t6_req[0] ^ `TOP.cpu.sii_l2t6_req[1] ^ `TOP.cpu.sii_l2t6_req[2] ^ `TOP.cpu.sii_l2t6_req[4] ^ `TOP.cpu.sii_l2t6_req[5] ^ `TOP.cpu.sii_l2t6_req[7] ^ `TOP.cpu.sii_l2t6_req[10] ^ `TOP.cpu.sii_l2t6_req[11] ^ `TOP.cpu.sii_l2t6_req[12] ^ `TOP.cpu.sii_l2t6_req[14] ^ `TOP.cpu.sii_l2t6_req[17] ^ `TOP.cpu.sii_l2t6_req[18] ^ `TOP.cpu.sii_l2t6_req[21] ^ `TOP.cpu.sii_l2t6_req[23] ^ `TOP.cpu.sii_l2t6_req[24] ^ `TOP.cpu.sii_l2t6_req[26] ^ `TOP.cpu.sii_l2t6_req[27] ^ `TOP.cpu.sii_l2t6_req[29] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t6_req_vld,8))) && ($0in_delay(sii_l2t6_req[24] == 0,8)) && ($0in_delay(sii_l2t6_req[25] == 0,8)) && ($0in_delay(sii_l2t6_req[26] == 1,8)) && ($0in_rising_edge($0in_delay(l2t6_sii_iq_dequeue,8))) && !(sii_wri_ecc6_l6_cycle7 == sii_l2b6_ecc[6]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc6_l6_wri_cycle7
*/

wire sii_wri_ecc0_l6_cycle8 =  (`TOP.cpu.sii_l2t6_req[0] ^ `TOP.cpu.sii_l2t6_req[1] ^ `TOP.cpu.sii_l2t6_req[3] ^ `TOP.cpu.sii_l2t6_req[4] ^ `TOP.cpu.sii_l2t6_req[6] ^ `TOP.cpu.sii_l2t6_req[8] ^ `TOP.cpu.sii_l2t6_req[10] ^ `TOP.cpu.sii_l2t6_req[11] ^ `TOP.cpu.sii_l2t6_req[13] ^ `TOP.cpu.sii_l2t6_req[15] ^ `TOP.cpu.sii_l2t6_req[17] ^ `TOP.cpu.sii_l2t6_req[19] ^ `TOP.cpu.sii_l2t6_req[21] ^ `TOP.cpu.sii_l2t6_req[23] ^ `TOP.cpu.sii_l2t6_req[25] ^ `TOP.cpu.sii_l2t6_req[26] ^ `TOP.cpu.sii_l2t6_req[28] ^ `TOP.cpu.sii_l2t6_req[30] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t6_req_vld,9))) && ($0in_delay(sii_l2t6_req[24] == 0,9)) && ($0in_delay(sii_l2t6_req[25] == 0,9)) && ($0in_delay(sii_l2t6_req[26] == 1,9)) && ($0in_rising_edge($0in_delay(l2t6_sii_iq_dequeue,9))) && !(sii_wri_ecc0_l6_cycle8 == sii_l2b6_ecc[0]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc0_l6_wri_cycle8
*/

wire sii_wri_ecc1_l6_cycle8 =  (`TOP.cpu.sii_l2t6_req[0] ^ `TOP.cpu.sii_l2t6_req[2] ^ `TOP.cpu.sii_l2t6_req[3] ^ `TOP.cpu.sii_l2t6_req[5] ^ `TOP.cpu.sii_l2t6_req[6] ^ `TOP.cpu.sii_l2t6_req[9] ^ `TOP.cpu.sii_l2t6_req[10] ^ `TOP.cpu.sii_l2t6_req[12] ^ `TOP.cpu.sii_l2t6_req[13] ^ `TOP.cpu.sii_l2t6_req[16] ^ `TOP.cpu.sii_l2t6_req[17] ^ `TOP.cpu.sii_l2t6_req[20] ^ `TOP.cpu.sii_l2t6_req[21] ^ `TOP.cpu.sii_l2t6_req[24] ^ `TOP.cpu.sii_l2t6_req[25] ^ `TOP.cpu.sii_l2t6_req[27] ^ `TOP.cpu.sii_l2t6_req[28] ^ `TOP.cpu.sii_l2t6_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t6_req_vld,9))) && ($0in_delay(sii_l2t6_req[24] == 0,9)) && ($0in_delay(sii_l2t6_req[25] == 0,9)) && ($0in_delay(sii_l2t6_req[26] == 1,9)) && ($0in_rising_edge($0in_delay(l2t6_sii_iq_dequeue,9))) && !(sii_wri_ecc1_l6_cycle8 == sii_l2b6_ecc[1]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc1_l6_wri_cycle8
*/

wire sii_wri_ecc2_l6_cycle8 =  (`TOP.cpu.sii_l2t6_req[1] ^ `TOP.cpu.sii_l2t6_req[2] ^ `TOP.cpu.sii_l2t6_req[3] ^ `TOP.cpu.sii_l2t6_req[7] ^ `TOP.cpu.sii_l2t6_req[8] ^ `TOP.cpu.sii_l2t6_req[9] ^ `TOP.cpu.sii_l2t6_req[10] ^ `TOP.cpu.sii_l2t6_req[14] ^ `TOP.cpu.sii_l2t6_req[15] ^ `TOP.cpu.sii_l2t6_req[16] ^ `TOP.cpu.sii_l2t6_req[17] ^ `TOP.cpu.sii_l2t6_req[22] ^ `TOP.cpu.sii_l2t6_req[23] ^ `TOP.cpu.sii_l2t6_req[24] ^ `TOP.cpu.sii_l2t6_req[25] ^ `TOP.cpu.sii_l2t6_req[29] ^ `TOP.cpu.sii_l2t6_req[30] ^ `TOP.cpu.sii_l2t6_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t6_req_vld,9))) && ($0in_delay(sii_l2t6_req[24] == 0,9)) && ($0in_delay(sii_l2t6_req[25] == 0,9)) && ($0in_delay(sii_l2t6_req[26] == 1,9)) && ($0in_rising_edge($0in_delay(l2t6_sii_iq_dequeue,9))) && !(sii_wri_ecc2_l6_cycle8 == sii_l2b6_ecc[2]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc2_l6_wri_cycle8
*/

wire sii_wri_ecc3_l6_cycle8 =  (`TOP.cpu.sii_l2t6_req[4] ^ `TOP.cpu.sii_l2t6_req[5] ^ `TOP.cpu.sii_l2t6_req[6] ^ `TOP.cpu.sii_l2t6_req[7] ^ `TOP.cpu.sii_l2t6_req[8] ^ `TOP.cpu.sii_l2t6_req[9] ^ `TOP.cpu.sii_l2t6_req[10] ^ `TOP.cpu.sii_l2t6_req[18] ^ `TOP.cpu.sii_l2t6_req[19] ^ `TOP.cpu.sii_l2t6_req[20] ^ `TOP.cpu.sii_l2t6_req[21] ^ `TOP.cpu.sii_l2t6_req[22] ^ `TOP.cpu.sii_l2t6_req[23] ^ `TOP.cpu.sii_l2t6_req[24] ^ `TOP.cpu.sii_l2t6_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t6_req_vld,9))) && ($0in_delay(sii_l2t6_req[24] == 0,9)) && ($0in_delay(sii_l2t6_req[25] == 0,9)) && ($0in_delay(sii_l2t6_req[26] == 1,9)) && ($0in_rising_edge($0in_delay(l2t6_sii_iq_dequeue,9))) && !(sii_wri_ecc3_l6_cycle8 == sii_l2b6_ecc[3]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc3_l6_wri_cycle8
*/

wire sii_wri_ecc4_l6_cycle8 =  ( `TOP.cpu.sii_l2t6_req[11] ^ `TOP.cpu.sii_l2t6_req[12] ^ `TOP.cpu.sii_l2t6_req[13] ^ `TOP.cpu.sii_l2t6_req[14] ^ `TOP.cpu.sii_l2t6_req[15] ^ `TOP.cpu.sii_l2t6_req[16] ^ `TOP.cpu.sii_l2t6_req[17] ^ `TOP.cpu.sii_l2t6_req[18] ^ `TOP.cpu.sii_l2t6_req[19] ^ `TOP.cpu.sii_l2t6_req[20] ^ `TOP.cpu.sii_l2t6_req[21] ^ `TOP.cpu.sii_l2t6_req[22] ^ `TOP.cpu.sii_l2t6_req[23] ^ `TOP.cpu.sii_l2t6_req[24] ^ `TOP.cpu.sii_l2t6_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t6_req_vld,9))) && ($0in_delay(sii_l2t6_req[24] == 0,9)) && ($0in_delay(sii_l2t6_req[25] == 0,9)) && ($0in_delay(sii_l2t6_req[26] == 1,9)) && ($0in_rising_edge($0in_delay(l2t6_sii_iq_dequeue,9))) && !(sii_wri_ecc4_l6_cycle8 == sii_l2b6_ecc[4]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc4_l6_wri_cycle8
*/

wire sii_wri_ecc5_l6_cycle8 =  (`TOP.cpu.sii_l2t6_req[26] ^ `TOP.cpu.sii_l2t6_req[27] ^ `TOP.cpu.sii_l2t6_req[28] ^ `TOP.cpu.sii_l2t6_req[29] ^ `TOP.cpu.sii_l2t6_req[30] ^ `TOP.cpu.sii_l2t6_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t6_req_vld,9))) && ($0in_delay(sii_l2t6_req[24] == 0,9)) && ($0in_delay(sii_l2t6_req[25] == 0,9)) && ($0in_delay(sii_l2t6_req[26] == 1,9)) && ($0in_rising_edge($0in_delay(l2t6_sii_iq_dequeue,9))) && !(sii_wri_ecc5_l6_cycle8 == sii_l2b6_ecc[5]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc5_l6_wri_cycle8
*/

wire sii_wri_ecc6_l6_cycle8 =  (`TOP.cpu.sii_l2t6_req[0] ^ `TOP.cpu.sii_l2t6_req[1] ^ `TOP.cpu.sii_l2t6_req[2] ^ `TOP.cpu.sii_l2t6_req[4] ^ `TOP.cpu.sii_l2t6_req[5] ^ `TOP.cpu.sii_l2t6_req[7] ^ `TOP.cpu.sii_l2t6_req[10] ^ `TOP.cpu.sii_l2t6_req[11] ^ `TOP.cpu.sii_l2t6_req[12] ^ `TOP.cpu.sii_l2t6_req[14] ^ `TOP.cpu.sii_l2t6_req[17] ^ `TOP.cpu.sii_l2t6_req[18] ^ `TOP.cpu.sii_l2t6_req[21] ^ `TOP.cpu.sii_l2t6_req[23] ^ `TOP.cpu.sii_l2t6_req[24] ^ `TOP.cpu.sii_l2t6_req[26] ^ `TOP.cpu.sii_l2t6_req[27] ^ `TOP.cpu.sii_l2t6_req[29] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t6_req_vld,9))) && ($0in_delay(sii_l2t6_req[24] == 0,9)) && ($0in_delay(sii_l2t6_req[25] == 0,9)) && ($0in_delay(sii_l2t6_req[26] == 1,9)) && ($0in_rising_edge($0in_delay(l2t6_sii_iq_dequeue,9))) && !(sii_wri_ecc6_l6_cycle8 == sii_l2b6_ecc[6]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc6_l6_wri_cycle8
*/

wire sii_wri_ecc0_l6_cycle9 =  (`TOP.cpu.sii_l2t6_req[0] ^ `TOP.cpu.sii_l2t6_req[1] ^ `TOP.cpu.sii_l2t6_req[3] ^ `TOP.cpu.sii_l2t6_req[4] ^ `TOP.cpu.sii_l2t6_req[6] ^ `TOP.cpu.sii_l2t6_req[8] ^ `TOP.cpu.sii_l2t6_req[10] ^ `TOP.cpu.sii_l2t6_req[11] ^ `TOP.cpu.sii_l2t6_req[13] ^ `TOP.cpu.sii_l2t6_req[15] ^ `TOP.cpu.sii_l2t6_req[17] ^ `TOP.cpu.sii_l2t6_req[19] ^ `TOP.cpu.sii_l2t6_req[21] ^ `TOP.cpu.sii_l2t6_req[23] ^ `TOP.cpu.sii_l2t6_req[25] ^ `TOP.cpu.sii_l2t6_req[26] ^ `TOP.cpu.sii_l2t6_req[28] ^ `TOP.cpu.sii_l2t6_req[30] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t6_req_vld,10))) && ($0in_delay(sii_l2t6_req[24] == 0,10)) && ($0in_delay(sii_l2t6_req[25] == 0,10)) && ($0in_delay(sii_l2t6_req[26] == 1,10)) && ($0in_rising_edge($0in_delay(l2t6_sii_iq_dequeue,10))) && !(sii_wri_ecc0_l6_cycle9 == sii_l2b6_ecc[0]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc0_l6_wri_cycle9
*/

wire sii_wri_ecc1_l6_cycle9 =  (`TOP.cpu.sii_l2t6_req[0] ^ `TOP.cpu.sii_l2t6_req[2] ^ `TOP.cpu.sii_l2t6_req[3] ^ `TOP.cpu.sii_l2t6_req[5] ^ `TOP.cpu.sii_l2t6_req[6] ^ `TOP.cpu.sii_l2t6_req[9] ^ `TOP.cpu.sii_l2t6_req[10] ^ `TOP.cpu.sii_l2t6_req[12] ^ `TOP.cpu.sii_l2t6_req[13] ^ `TOP.cpu.sii_l2t6_req[16] ^ `TOP.cpu.sii_l2t6_req[17] ^ `TOP.cpu.sii_l2t6_req[20] ^ `TOP.cpu.sii_l2t6_req[21] ^ `TOP.cpu.sii_l2t6_req[24] ^ `TOP.cpu.sii_l2t6_req[25] ^ `TOP.cpu.sii_l2t6_req[27] ^ `TOP.cpu.sii_l2t6_req[28] ^ `TOP.cpu.sii_l2t6_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t6_req_vld,10))) && ($0in_delay(sii_l2t6_req[24] == 0,10)) && ($0in_delay(sii_l2t6_req[25] == 0,10)) && ($0in_delay(sii_l2t6_req[26] == 1,10)) && ($0in_rising_edge($0in_delay(l2t6_sii_iq_dequeue,10))) && !(sii_wri_ecc1_l6_cycle9 == sii_l2b6_ecc[1]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc1_l6_wri_cycle9
*/

wire sii_wri_ecc2_l6_cycle9 =  (`TOP.cpu.sii_l2t6_req[1] ^ `TOP.cpu.sii_l2t6_req[2] ^ `TOP.cpu.sii_l2t6_req[3] ^ `TOP.cpu.sii_l2t6_req[7] ^ `TOP.cpu.sii_l2t6_req[8] ^ `TOP.cpu.sii_l2t6_req[9] ^ `TOP.cpu.sii_l2t6_req[10] ^ `TOP.cpu.sii_l2t6_req[14] ^ `TOP.cpu.sii_l2t6_req[15] ^ `TOP.cpu.sii_l2t6_req[16] ^ `TOP.cpu.sii_l2t6_req[17] ^ `TOP.cpu.sii_l2t6_req[22] ^ `TOP.cpu.sii_l2t6_req[23] ^ `TOP.cpu.sii_l2t6_req[24] ^ `TOP.cpu.sii_l2t6_req[25] ^ `TOP.cpu.sii_l2t6_req[29] ^ `TOP.cpu.sii_l2t6_req[30] ^ `TOP.cpu.sii_l2t6_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t6_req_vld,10))) && ($0in_delay(sii_l2t6_req[24] == 0,10)) && ($0in_delay(sii_l2t6_req[25] == 0,10)) && ($0in_delay(sii_l2t6_req[26] == 1,10)) && ($0in_rising_edge($0in_delay(l2t6_sii_iq_dequeue,10))) && !(sii_wri_ecc2_l6_cycle9 == sii_l2b6_ecc[2]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc2_l6_wri_cycle9
*/

wire sii_wri_ecc3_l6_cycle9 =  (`TOP.cpu.sii_l2t6_req[4] ^ `TOP.cpu.sii_l2t6_req[5] ^ `TOP.cpu.sii_l2t6_req[6] ^ `TOP.cpu.sii_l2t6_req[7] ^ `TOP.cpu.sii_l2t6_req[8] ^ `TOP.cpu.sii_l2t6_req[9] ^ `TOP.cpu.sii_l2t6_req[10] ^ `TOP.cpu.sii_l2t6_req[18] ^ `TOP.cpu.sii_l2t6_req[19] ^ `TOP.cpu.sii_l2t6_req[20] ^ `TOP.cpu.sii_l2t6_req[21] ^ `TOP.cpu.sii_l2t6_req[22] ^ `TOP.cpu.sii_l2t6_req[23] ^ `TOP.cpu.sii_l2t6_req[24] ^ `TOP.cpu.sii_l2t6_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t6_req_vld,10))) && ($0in_delay(sii_l2t6_req[24] == 0,10)) && ($0in_delay(sii_l2t6_req[25] == 0,10)) && ($0in_delay(sii_l2t6_req[26] == 1,10)) && ($0in_rising_edge($0in_delay(l2t6_sii_iq_dequeue,10))) && !(sii_wri_ecc3_l6_cycle9 == sii_l2b6_ecc[3]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc3_l6_wri_cycle9
*/

wire sii_wri_ecc4_l6_cycle9 =  ( `TOP.cpu.sii_l2t6_req[11] ^ `TOP.cpu.sii_l2t6_req[12] ^ `TOP.cpu.sii_l2t6_req[13] ^ `TOP.cpu.sii_l2t6_req[14] ^ `TOP.cpu.sii_l2t6_req[15] ^ `TOP.cpu.sii_l2t6_req[16] ^ `TOP.cpu.sii_l2t6_req[17] ^ `TOP.cpu.sii_l2t6_req[18] ^ `TOP.cpu.sii_l2t6_req[19] ^ `TOP.cpu.sii_l2t6_req[20] ^ `TOP.cpu.sii_l2t6_req[21] ^ `TOP.cpu.sii_l2t6_req[22] ^ `TOP.cpu.sii_l2t6_req[23] ^ `TOP.cpu.sii_l2t6_req[24] ^ `TOP.cpu.sii_l2t6_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t6_req_vld,10))) && ($0in_delay(sii_l2t6_req[24] == 0,10)) && ($0in_delay(sii_l2t6_req[25] == 0,10)) && ($0in_delay(sii_l2t6_req[26] == 1,10)) && ($0in_rising_edge($0in_delay(l2t6_sii_iq_dequeue,10))) && !(sii_wri_ecc4_l6_cycle9 == sii_l2b6_ecc[4]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc4_l6_wri_cycle9
*/

wire sii_wri_ecc5_l6_cycle9 =  (`TOP.cpu.sii_l2t6_req[26] ^ `TOP.cpu.sii_l2t6_req[27] ^ `TOP.cpu.sii_l2t6_req[28] ^ `TOP.cpu.sii_l2t6_req[29] ^ `TOP.cpu.sii_l2t6_req[30] ^ `TOP.cpu.sii_l2t6_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t6_req_vld,10))) && ($0in_delay(sii_l2t6_req[24] == 0,10)) && ($0in_delay(sii_l2t6_req[25] == 0,10)) && ($0in_delay(sii_l2t6_req[26] == 1,10)) && ($0in_rising_edge($0in_delay(l2t6_sii_iq_dequeue,10))) && !(sii_wri_ecc5_l6_cycle9 == sii_l2b6_ecc[5]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc5_l6_wri_cycle9
*/

wire sii_wri_ecc6_l6_cycle9 =  (`TOP.cpu.sii_l2t6_req[0] ^ `TOP.cpu.sii_l2t6_req[1] ^ `TOP.cpu.sii_l2t6_req[2] ^ `TOP.cpu.sii_l2t6_req[4] ^ `TOP.cpu.sii_l2t6_req[5] ^ `TOP.cpu.sii_l2t6_req[7] ^ `TOP.cpu.sii_l2t6_req[10] ^ `TOP.cpu.sii_l2t6_req[11] ^ `TOP.cpu.sii_l2t6_req[12] ^ `TOP.cpu.sii_l2t6_req[14] ^ `TOP.cpu.sii_l2t6_req[17] ^ `TOP.cpu.sii_l2t6_req[18] ^ `TOP.cpu.sii_l2t6_req[21] ^ `TOP.cpu.sii_l2t6_req[23] ^ `TOP.cpu.sii_l2t6_req[24] ^ `TOP.cpu.sii_l2t6_req[26] ^ `TOP.cpu.sii_l2t6_req[27] ^ `TOP.cpu.sii_l2t6_req[29] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t6_req_vld,10))) && ($0in_delay(sii_l2t6_req[24] == 0,10)) && ($0in_delay(sii_l2t6_req[25] == 0,10)) && ($0in_delay(sii_l2t6_req[26] == 1,10)) && ($0in_rising_edge($0in_delay(l2t6_sii_iq_dequeue,10))) && !(sii_wri_ecc6_l6_cycle9 == sii_l2b6_ecc[6]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc6_l6_wri_cycle9
*/

wire sii_wri_ecc0_l6_cycle10 =  (`TOP.cpu.sii_l2t6_req[0] ^ `TOP.cpu.sii_l2t6_req[1] ^ `TOP.cpu.sii_l2t6_req[3] ^ `TOP.cpu.sii_l2t6_req[4] ^ `TOP.cpu.sii_l2t6_req[6] ^ `TOP.cpu.sii_l2t6_req[8] ^ `TOP.cpu.sii_l2t6_req[10] ^ `TOP.cpu.sii_l2t6_req[11] ^ `TOP.cpu.sii_l2t6_req[13] ^ `TOP.cpu.sii_l2t6_req[15] ^ `TOP.cpu.sii_l2t6_req[17] ^ `TOP.cpu.sii_l2t6_req[19] ^ `TOP.cpu.sii_l2t6_req[21] ^ `TOP.cpu.sii_l2t6_req[23] ^ `TOP.cpu.sii_l2t6_req[25] ^ `TOP.cpu.sii_l2t6_req[26] ^ `TOP.cpu.sii_l2t6_req[28] ^ `TOP.cpu.sii_l2t6_req[30] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t6_req_vld,11))) && ($0in_delay(sii_l2t6_req[24] == 0,11)) && ($0in_delay(sii_l2t6_req[25] == 0,11)) && ($0in_delay(sii_l2t6_req[26] == 1,11)) && ($0in_rising_edge($0in_delay(l2t6_sii_iq_dequeue,11))) && !(sii_wri_ecc0_l6_cycle10 == sii_l2b6_ecc[0]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc0_l6_wri_cycle10
*/

wire sii_wri_ecc1_l6_cycle10 =  (`TOP.cpu.sii_l2t6_req[0] ^ `TOP.cpu.sii_l2t6_req[2] ^ `TOP.cpu.sii_l2t6_req[3] ^ `TOP.cpu.sii_l2t6_req[5] ^ `TOP.cpu.sii_l2t6_req[6] ^ `TOP.cpu.sii_l2t6_req[9] ^ `TOP.cpu.sii_l2t6_req[10] ^ `TOP.cpu.sii_l2t6_req[12] ^ `TOP.cpu.sii_l2t6_req[13] ^ `TOP.cpu.sii_l2t6_req[16] ^ `TOP.cpu.sii_l2t6_req[17] ^ `TOP.cpu.sii_l2t6_req[20] ^ `TOP.cpu.sii_l2t6_req[21] ^ `TOP.cpu.sii_l2t6_req[24] ^ `TOP.cpu.sii_l2t6_req[25] ^ `TOP.cpu.sii_l2t6_req[27] ^ `TOP.cpu.sii_l2t6_req[28] ^ `TOP.cpu.sii_l2t6_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t6_req_vld,11))) && ($0in_delay(sii_l2t6_req[24] == 0,11)) && ($0in_delay(sii_l2t6_req[25] == 0,11)) && ($0in_delay(sii_l2t6_req[26] == 1,11)) && ($0in_rising_edge($0in_delay(l2t6_sii_iq_dequeue,11))) && !(sii_wri_ecc1_l6_cycle10 == sii_l2b6_ecc[1]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc1_l6_wri_cycle10
*/

wire sii_wri_ecc2_l6_cycle10 =  (`TOP.cpu.sii_l2t6_req[1] ^ `TOP.cpu.sii_l2t6_req[2] ^ `TOP.cpu.sii_l2t6_req[3] ^ `TOP.cpu.sii_l2t6_req[7] ^ `TOP.cpu.sii_l2t6_req[8] ^ `TOP.cpu.sii_l2t6_req[9] ^ `TOP.cpu.sii_l2t6_req[10] ^ `TOP.cpu.sii_l2t6_req[14] ^ `TOP.cpu.sii_l2t6_req[15] ^ `TOP.cpu.sii_l2t6_req[16] ^ `TOP.cpu.sii_l2t6_req[17] ^ `TOP.cpu.sii_l2t6_req[22] ^ `TOP.cpu.sii_l2t6_req[23] ^ `TOP.cpu.sii_l2t6_req[24] ^ `TOP.cpu.sii_l2t6_req[25] ^ `TOP.cpu.sii_l2t6_req[29] ^ `TOP.cpu.sii_l2t6_req[30] ^ `TOP.cpu.sii_l2t6_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t6_req_vld,11))) && ($0in_delay(sii_l2t6_req[24] == 0,11)) && ($0in_delay(sii_l2t6_req[25] == 0,11)) && ($0in_delay(sii_l2t6_req[26] == 1,11)) && ($0in_rising_edge($0in_delay(l2t6_sii_iq_dequeue,11))) && !(sii_wri_ecc2_l6_cycle10 == sii_l2b6_ecc[2]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc2_l6_wri_cycle10
*/

wire sii_wri_ecc3_l6_cycle10 =  (`TOP.cpu.sii_l2t6_req[4] ^ `TOP.cpu.sii_l2t6_req[5] ^ `TOP.cpu.sii_l2t6_req[6] ^ `TOP.cpu.sii_l2t6_req[7] ^ `TOP.cpu.sii_l2t6_req[8] ^ `TOP.cpu.sii_l2t6_req[9] ^ `TOP.cpu.sii_l2t6_req[10] ^ `TOP.cpu.sii_l2t6_req[18] ^ `TOP.cpu.sii_l2t6_req[19] ^ `TOP.cpu.sii_l2t6_req[20] ^ `TOP.cpu.sii_l2t6_req[21] ^ `TOP.cpu.sii_l2t6_req[22] ^ `TOP.cpu.sii_l2t6_req[23] ^ `TOP.cpu.sii_l2t6_req[24] ^ `TOP.cpu.sii_l2t6_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t6_req_vld,11))) && ($0in_delay(sii_l2t6_req[24] == 0,11)) && ($0in_delay(sii_l2t6_req[25] == 0,11)) && ($0in_delay(sii_l2t6_req[26] == 1,11)) && ($0in_rising_edge($0in_delay(l2t6_sii_iq_dequeue,11))) && !(sii_wri_ecc3_l6_cycle10 == sii_l2b6_ecc[3]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc3_l6_wri_cycle10
*/

wire sii_wri_ecc4_l6_cycle10 =  ( `TOP.cpu.sii_l2t6_req[11] ^ `TOP.cpu.sii_l2t6_req[12] ^ `TOP.cpu.sii_l2t6_req[13] ^ `TOP.cpu.sii_l2t6_req[14] ^ `TOP.cpu.sii_l2t6_req[15] ^ `TOP.cpu.sii_l2t6_req[16] ^ `TOP.cpu.sii_l2t6_req[17] ^ `TOP.cpu.sii_l2t6_req[18] ^ `TOP.cpu.sii_l2t6_req[19] ^ `TOP.cpu.sii_l2t6_req[20] ^ `TOP.cpu.sii_l2t6_req[21] ^ `TOP.cpu.sii_l2t6_req[22] ^ `TOP.cpu.sii_l2t6_req[23] ^ `TOP.cpu.sii_l2t6_req[24] ^ `TOP.cpu.sii_l2t6_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t6_req_vld,11))) && ($0in_delay(sii_l2t6_req[24] == 0,11)) && ($0in_delay(sii_l2t6_req[25] == 0,11)) && ($0in_delay(sii_l2t6_req[26] == 1,11)) && ($0in_rising_edge($0in_delay(l2t6_sii_iq_dequeue,11))) && !(sii_wri_ecc4_l6_cycle10 == sii_l2b6_ecc[4]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc4_l6_wri_cycle10
*/

wire sii_wri_ecc5_l6_cycle10 =  (`TOP.cpu.sii_l2t6_req[26] ^ `TOP.cpu.sii_l2t6_req[27] ^ `TOP.cpu.sii_l2t6_req[28] ^ `TOP.cpu.sii_l2t6_req[29] ^ `TOP.cpu.sii_l2t6_req[30] ^ `TOP.cpu.sii_l2t6_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t6_req_vld,11))) && ($0in_delay(sii_l2t6_req[24] == 0,11)) && ($0in_delay(sii_l2t6_req[25] == 0,11)) && ($0in_delay(sii_l2t6_req[26] == 1,11)) && ($0in_rising_edge($0in_delay(l2t6_sii_iq_dequeue,11))) && !(sii_wri_ecc5_l6_cycle10 == sii_l2b6_ecc[5]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc5_l6_wri_cycle10
*/

wire sii_wri_ecc6_l6_cycle10 =  (`TOP.cpu.sii_l2t6_req[0] ^ `TOP.cpu.sii_l2t6_req[1] ^ `TOP.cpu.sii_l2t6_req[2] ^ `TOP.cpu.sii_l2t6_req[4] ^ `TOP.cpu.sii_l2t6_req[5] ^ `TOP.cpu.sii_l2t6_req[7] ^ `TOP.cpu.sii_l2t6_req[10] ^ `TOP.cpu.sii_l2t6_req[11] ^ `TOP.cpu.sii_l2t6_req[12] ^ `TOP.cpu.sii_l2t6_req[14] ^ `TOP.cpu.sii_l2t6_req[17] ^ `TOP.cpu.sii_l2t6_req[18] ^ `TOP.cpu.sii_l2t6_req[21] ^ `TOP.cpu.sii_l2t6_req[23] ^ `TOP.cpu.sii_l2t6_req[24] ^ `TOP.cpu.sii_l2t6_req[26] ^ `TOP.cpu.sii_l2t6_req[27] ^ `TOP.cpu.sii_l2t6_req[29] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t6_req_vld,11))) && ($0in_delay(sii_l2t6_req[24] == 0,11)) && ($0in_delay(sii_l2t6_req[25] == 0,11)) && ($0in_delay(sii_l2t6_req[26] == 1,11)) && ($0in_rising_edge($0in_delay(l2t6_sii_iq_dequeue,11))) && !(sii_wri_ecc6_l6_cycle10 == sii_l2b6_ecc[6]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc6_l6_wri_cycle10
*/

wire sii_wri_ecc0_l6_cycle11 =  (`TOP.cpu.sii_l2t6_req[0] ^ `TOP.cpu.sii_l2t6_req[1] ^ `TOP.cpu.sii_l2t6_req[3] ^ `TOP.cpu.sii_l2t6_req[4] ^ `TOP.cpu.sii_l2t6_req[6] ^ `TOP.cpu.sii_l2t6_req[8] ^ `TOP.cpu.sii_l2t6_req[10] ^ `TOP.cpu.sii_l2t6_req[11] ^ `TOP.cpu.sii_l2t6_req[13] ^ `TOP.cpu.sii_l2t6_req[15] ^ `TOP.cpu.sii_l2t6_req[17] ^ `TOP.cpu.sii_l2t6_req[19] ^ `TOP.cpu.sii_l2t6_req[21] ^ `TOP.cpu.sii_l2t6_req[23] ^ `TOP.cpu.sii_l2t6_req[25] ^ `TOP.cpu.sii_l2t6_req[26] ^ `TOP.cpu.sii_l2t6_req[28] ^ `TOP.cpu.sii_l2t6_req[30] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t6_req_vld,12))) && ($0in_delay(sii_l2t6_req[24] == 0,12)) && ($0in_delay(sii_l2t6_req[25] == 0,12)) && ($0in_delay(sii_l2t6_req[26] == 1,12)) && ($0in_rising_edge($0in_delay(l2t6_sii_iq_dequeue,12))) && !(sii_wri_ecc0_l6_cycle11 == sii_l2b6_ecc[0]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc0_l6_wri_cycle11
*/

wire sii_wri_ecc1_l6_cycle11 =  (`TOP.cpu.sii_l2t6_req[0] ^ `TOP.cpu.sii_l2t6_req[2] ^ `TOP.cpu.sii_l2t6_req[3] ^ `TOP.cpu.sii_l2t6_req[5] ^ `TOP.cpu.sii_l2t6_req[6] ^ `TOP.cpu.sii_l2t6_req[9] ^ `TOP.cpu.sii_l2t6_req[10] ^ `TOP.cpu.sii_l2t6_req[12] ^ `TOP.cpu.sii_l2t6_req[13] ^ `TOP.cpu.sii_l2t6_req[16] ^ `TOP.cpu.sii_l2t6_req[17] ^ `TOP.cpu.sii_l2t6_req[20] ^ `TOP.cpu.sii_l2t6_req[21] ^ `TOP.cpu.sii_l2t6_req[24] ^ `TOP.cpu.sii_l2t6_req[25] ^ `TOP.cpu.sii_l2t6_req[27] ^ `TOP.cpu.sii_l2t6_req[28] ^ `TOP.cpu.sii_l2t6_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t6_req_vld,12))) && ($0in_delay(sii_l2t6_req[24] == 0,12)) && ($0in_delay(sii_l2t6_req[25] == 0,12)) && ($0in_delay(sii_l2t6_req[26] == 1,12)) && ($0in_rising_edge($0in_delay(l2t6_sii_iq_dequeue,12))) && !(sii_wri_ecc1_l6_cycle11 == sii_l2b6_ecc[1]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc1_l6_wri_cycle11
*/

wire sii_wri_ecc2_l6_cycle11 =  (`TOP.cpu.sii_l2t6_req[1] ^ `TOP.cpu.sii_l2t6_req[2] ^ `TOP.cpu.sii_l2t6_req[3] ^ `TOP.cpu.sii_l2t6_req[7] ^ `TOP.cpu.sii_l2t6_req[8] ^ `TOP.cpu.sii_l2t6_req[9] ^ `TOP.cpu.sii_l2t6_req[10] ^ `TOP.cpu.sii_l2t6_req[14] ^ `TOP.cpu.sii_l2t6_req[15] ^ `TOP.cpu.sii_l2t6_req[16] ^ `TOP.cpu.sii_l2t6_req[17] ^ `TOP.cpu.sii_l2t6_req[22] ^ `TOP.cpu.sii_l2t6_req[23] ^ `TOP.cpu.sii_l2t6_req[24] ^ `TOP.cpu.sii_l2t6_req[25] ^ `TOP.cpu.sii_l2t6_req[29] ^ `TOP.cpu.sii_l2t6_req[30] ^ `TOP.cpu.sii_l2t6_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t6_req_vld,12))) && ($0in_delay(sii_l2t6_req[24] == 0,12)) && ($0in_delay(sii_l2t6_req[25] == 0,12)) && ($0in_delay(sii_l2t6_req[26] == 1,12)) && ($0in_rising_edge($0in_delay(l2t6_sii_iq_dequeue,12))) && !(sii_wri_ecc2_l6_cycle11 == sii_l2b6_ecc[2]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc2_l6_wri_cycle11
*/

wire sii_wri_ecc3_l6_cycle11 =  (`TOP.cpu.sii_l2t6_req[4] ^ `TOP.cpu.sii_l2t6_req[5] ^ `TOP.cpu.sii_l2t6_req[6] ^ `TOP.cpu.sii_l2t6_req[7] ^ `TOP.cpu.sii_l2t6_req[8] ^ `TOP.cpu.sii_l2t6_req[9] ^ `TOP.cpu.sii_l2t6_req[10] ^ `TOP.cpu.sii_l2t6_req[18] ^ `TOP.cpu.sii_l2t6_req[19] ^ `TOP.cpu.sii_l2t6_req[20] ^ `TOP.cpu.sii_l2t6_req[21] ^ `TOP.cpu.sii_l2t6_req[22] ^ `TOP.cpu.sii_l2t6_req[23] ^ `TOP.cpu.sii_l2t6_req[24] ^ `TOP.cpu.sii_l2t6_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t6_req_vld,12))) && ($0in_delay(sii_l2t6_req[24] == 0,12)) && ($0in_delay(sii_l2t6_req[25] == 0,12)) && ($0in_delay(sii_l2t6_req[26] == 1,12)) && ($0in_rising_edge($0in_delay(l2t6_sii_iq_dequeue,12))) && !(sii_wri_ecc3_l6_cycle11 == sii_l2b6_ecc[3]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc3_l6_wri_cycle11
*/

wire sii_wri_ecc4_l6_cycle11 =  ( `TOP.cpu.sii_l2t6_req[11] ^ `TOP.cpu.sii_l2t6_req[12] ^ `TOP.cpu.sii_l2t6_req[13] ^ `TOP.cpu.sii_l2t6_req[14] ^ `TOP.cpu.sii_l2t6_req[15] ^ `TOP.cpu.sii_l2t6_req[16] ^ `TOP.cpu.sii_l2t6_req[17] ^ `TOP.cpu.sii_l2t6_req[18] ^ `TOP.cpu.sii_l2t6_req[19] ^ `TOP.cpu.sii_l2t6_req[20] ^ `TOP.cpu.sii_l2t6_req[21] ^ `TOP.cpu.sii_l2t6_req[22] ^ `TOP.cpu.sii_l2t6_req[23] ^ `TOP.cpu.sii_l2t6_req[24] ^ `TOP.cpu.sii_l2t6_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t6_req_vld,12))) && ($0in_delay(sii_l2t6_req[24] == 0,12)) && ($0in_delay(sii_l2t6_req[25] == 0,12)) && ($0in_delay(sii_l2t6_req[26] == 1,12)) && ($0in_rising_edge($0in_delay(l2t6_sii_iq_dequeue,12))) && !(sii_wri_ecc4_l6_cycle11 == sii_l2b6_ecc[4]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc4_l6_wri_cycle11
*/

wire sii_wri_ecc5_l6_cycle11 =  (`TOP.cpu.sii_l2t6_req[26] ^ `TOP.cpu.sii_l2t6_req[27] ^ `TOP.cpu.sii_l2t6_req[28] ^ `TOP.cpu.sii_l2t6_req[29] ^ `TOP.cpu.sii_l2t6_req[30] ^ `TOP.cpu.sii_l2t6_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t6_req_vld,12))) && ($0in_delay(sii_l2t6_req[24] == 0,12)) && ($0in_delay(sii_l2t6_req[25] == 0,12)) && ($0in_delay(sii_l2t6_req[26] == 1,12)) && ($0in_rising_edge($0in_delay(l2t6_sii_iq_dequeue,12))) && !(sii_wri_ecc5_l6_cycle11 == sii_l2b6_ecc[5]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc5_l6_wri_cycle11
*/

wire sii_wri_ecc6_l6_cycle11 =  (`TOP.cpu.sii_l2t6_req[0] ^ `TOP.cpu.sii_l2t6_req[1] ^ `TOP.cpu.sii_l2t6_req[2] ^ `TOP.cpu.sii_l2t6_req[4] ^ `TOP.cpu.sii_l2t6_req[5] ^ `TOP.cpu.sii_l2t6_req[7] ^ `TOP.cpu.sii_l2t6_req[10] ^ `TOP.cpu.sii_l2t6_req[11] ^ `TOP.cpu.sii_l2t6_req[12] ^ `TOP.cpu.sii_l2t6_req[14] ^ `TOP.cpu.sii_l2t6_req[17] ^ `TOP.cpu.sii_l2t6_req[18] ^ `TOP.cpu.sii_l2t6_req[21] ^ `TOP.cpu.sii_l2t6_req[23] ^ `TOP.cpu.sii_l2t6_req[24] ^ `TOP.cpu.sii_l2t6_req[26] ^ `TOP.cpu.sii_l2t6_req[27] ^ `TOP.cpu.sii_l2t6_req[29] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t6_req_vld,12))) && ($0in_delay(sii_l2t6_req[24] == 0,12)) && ($0in_delay(sii_l2t6_req[25] == 0,12)) && ($0in_delay(sii_l2t6_req[26] == 1,12)) && ($0in_rising_edge($0in_delay(l2t6_sii_iq_dequeue,12))) && !(sii_wri_ecc6_l6_cycle11 == sii_l2b6_ecc[6]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc6_l6_wri_cycle11
*/

wire sii_wri_ecc0_l6_cycle12 =  (`TOP.cpu.sii_l2t6_req[0] ^ `TOP.cpu.sii_l2t6_req[1] ^ `TOP.cpu.sii_l2t6_req[3] ^ `TOP.cpu.sii_l2t6_req[4] ^ `TOP.cpu.sii_l2t6_req[6] ^ `TOP.cpu.sii_l2t6_req[8] ^ `TOP.cpu.sii_l2t6_req[10] ^ `TOP.cpu.sii_l2t6_req[11] ^ `TOP.cpu.sii_l2t6_req[13] ^ `TOP.cpu.sii_l2t6_req[15] ^ `TOP.cpu.sii_l2t6_req[17] ^ `TOP.cpu.sii_l2t6_req[19] ^ `TOP.cpu.sii_l2t6_req[21] ^ `TOP.cpu.sii_l2t6_req[23] ^ `TOP.cpu.sii_l2t6_req[25] ^ `TOP.cpu.sii_l2t6_req[26] ^ `TOP.cpu.sii_l2t6_req[28] ^ `TOP.cpu.sii_l2t6_req[30] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t6_req_vld,13))) && ($0in_delay(sii_l2t6_req[24] == 0,13)) && ($0in_delay(sii_l2t6_req[25] == 0,13)) && ($0in_delay(sii_l2t6_req[26] == 1,13)) && ($0in_rising_edge($0in_delay(l2t6_sii_iq_dequeue,13))) && !(sii_wri_ecc0_l6_cycle12 == sii_l2b6_ecc[0]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc0_l6_wri_cycle12
*/

wire sii_wri_ecc1_l6_cycle12 =  (`TOP.cpu.sii_l2t6_req[0] ^ `TOP.cpu.sii_l2t6_req[2] ^ `TOP.cpu.sii_l2t6_req[3] ^ `TOP.cpu.sii_l2t6_req[5] ^ `TOP.cpu.sii_l2t6_req[6] ^ `TOP.cpu.sii_l2t6_req[9] ^ `TOP.cpu.sii_l2t6_req[10] ^ `TOP.cpu.sii_l2t6_req[12] ^ `TOP.cpu.sii_l2t6_req[13] ^ `TOP.cpu.sii_l2t6_req[16] ^ `TOP.cpu.sii_l2t6_req[17] ^ `TOP.cpu.sii_l2t6_req[20] ^ `TOP.cpu.sii_l2t6_req[21] ^ `TOP.cpu.sii_l2t6_req[24] ^ `TOP.cpu.sii_l2t6_req[25] ^ `TOP.cpu.sii_l2t6_req[27] ^ `TOP.cpu.sii_l2t6_req[28] ^ `TOP.cpu.sii_l2t6_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t6_req_vld,13))) && ($0in_delay(sii_l2t6_req[24] == 0,13)) && ($0in_delay(sii_l2t6_req[25] == 0,13)) && ($0in_delay(sii_l2t6_req[26] == 1,13)) && ($0in_rising_edge($0in_delay(l2t6_sii_iq_dequeue,13))) && !(sii_wri_ecc1_l6_cycle12 == sii_l2b6_ecc[1]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc1_l6_wri_cycle12
*/

wire sii_wri_ecc2_l6_cycle12 =  (`TOP.cpu.sii_l2t6_req[1] ^ `TOP.cpu.sii_l2t6_req[2] ^ `TOP.cpu.sii_l2t6_req[3] ^ `TOP.cpu.sii_l2t6_req[7] ^ `TOP.cpu.sii_l2t6_req[8] ^ `TOP.cpu.sii_l2t6_req[9] ^ `TOP.cpu.sii_l2t6_req[10] ^ `TOP.cpu.sii_l2t6_req[14] ^ `TOP.cpu.sii_l2t6_req[15] ^ `TOP.cpu.sii_l2t6_req[16] ^ `TOP.cpu.sii_l2t6_req[17] ^ `TOP.cpu.sii_l2t6_req[22] ^ `TOP.cpu.sii_l2t6_req[23] ^ `TOP.cpu.sii_l2t6_req[24] ^ `TOP.cpu.sii_l2t6_req[25] ^ `TOP.cpu.sii_l2t6_req[29] ^ `TOP.cpu.sii_l2t6_req[30] ^ `TOP.cpu.sii_l2t6_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t6_req_vld,13))) && ($0in_delay(sii_l2t6_req[24] == 0,13)) && ($0in_delay(sii_l2t6_req[25] == 0,13)) && ($0in_delay(sii_l2t6_req[26] == 1,13)) && ($0in_rising_edge($0in_delay(l2t6_sii_iq_dequeue,13))) && !(sii_wri_ecc2_l6_cycle12 == sii_l2b6_ecc[2]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc2_l6_wri_cycle12
*/

wire sii_wri_ecc3_l6_cycle12 =  (`TOP.cpu.sii_l2t6_req[4] ^ `TOP.cpu.sii_l2t6_req[5] ^ `TOP.cpu.sii_l2t6_req[6] ^ `TOP.cpu.sii_l2t6_req[7] ^ `TOP.cpu.sii_l2t6_req[8] ^ `TOP.cpu.sii_l2t6_req[9] ^ `TOP.cpu.sii_l2t6_req[10] ^ `TOP.cpu.sii_l2t6_req[18] ^ `TOP.cpu.sii_l2t6_req[19] ^ `TOP.cpu.sii_l2t6_req[20] ^ `TOP.cpu.sii_l2t6_req[21] ^ `TOP.cpu.sii_l2t6_req[22] ^ `TOP.cpu.sii_l2t6_req[23] ^ `TOP.cpu.sii_l2t6_req[24] ^ `TOP.cpu.sii_l2t6_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t6_req_vld,13))) && ($0in_delay(sii_l2t6_req[24] == 0,13)) && ($0in_delay(sii_l2t6_req[25] == 0,13)) && ($0in_delay(sii_l2t6_req[26] == 1,13)) && ($0in_rising_edge($0in_delay(l2t6_sii_iq_dequeue,13))) && !(sii_wri_ecc3_l6_cycle12 == sii_l2b6_ecc[3]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc3_l6_wri_cycle12
*/

wire sii_wri_ecc4_l6_cycle12 =  ( `TOP.cpu.sii_l2t6_req[11] ^ `TOP.cpu.sii_l2t6_req[12] ^ `TOP.cpu.sii_l2t6_req[13] ^ `TOP.cpu.sii_l2t6_req[14] ^ `TOP.cpu.sii_l2t6_req[15] ^ `TOP.cpu.sii_l2t6_req[16] ^ `TOP.cpu.sii_l2t6_req[17] ^ `TOP.cpu.sii_l2t6_req[18] ^ `TOP.cpu.sii_l2t6_req[19] ^ `TOP.cpu.sii_l2t6_req[20] ^ `TOP.cpu.sii_l2t6_req[21] ^ `TOP.cpu.sii_l2t6_req[22] ^ `TOP.cpu.sii_l2t6_req[23] ^ `TOP.cpu.sii_l2t6_req[24] ^ `TOP.cpu.sii_l2t6_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t6_req_vld,13))) && ($0in_delay(sii_l2t6_req[24] == 0,13)) && ($0in_delay(sii_l2t6_req[25] == 0,13)) && ($0in_delay(sii_l2t6_req[26] == 1,13)) && ($0in_rising_edge($0in_delay(l2t6_sii_iq_dequeue,13))) && !(sii_wri_ecc4_l6_cycle12 == sii_l2b6_ecc[4]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc4_l6_wri_cycle12
*/

wire sii_wri_ecc5_l6_cycle12 =  (`TOP.cpu.sii_l2t6_req[26] ^ `TOP.cpu.sii_l2t6_req[27] ^ `TOP.cpu.sii_l2t6_req[28] ^ `TOP.cpu.sii_l2t6_req[29] ^ `TOP.cpu.sii_l2t6_req[30] ^ `TOP.cpu.sii_l2t6_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t6_req_vld,13))) && ($0in_delay(sii_l2t6_req[24] == 0,13)) && ($0in_delay(sii_l2t6_req[25] == 0,13)) && ($0in_delay(sii_l2t6_req[26] == 1,13)) && ($0in_rising_edge($0in_delay(l2t6_sii_iq_dequeue,13))) && !(sii_wri_ecc5_l6_cycle12 == sii_l2b6_ecc[5]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc5_l6_wri_cycle12
*/

wire sii_wri_ecc6_l6_cycle12 =  (`TOP.cpu.sii_l2t6_req[0] ^ `TOP.cpu.sii_l2t6_req[1] ^ `TOP.cpu.sii_l2t6_req[2] ^ `TOP.cpu.sii_l2t6_req[4] ^ `TOP.cpu.sii_l2t6_req[5] ^ `TOP.cpu.sii_l2t6_req[7] ^ `TOP.cpu.sii_l2t6_req[10] ^ `TOP.cpu.sii_l2t6_req[11] ^ `TOP.cpu.sii_l2t6_req[12] ^ `TOP.cpu.sii_l2t6_req[14] ^ `TOP.cpu.sii_l2t6_req[17] ^ `TOP.cpu.sii_l2t6_req[18] ^ `TOP.cpu.sii_l2t6_req[21] ^ `TOP.cpu.sii_l2t6_req[23] ^ `TOP.cpu.sii_l2t6_req[24] ^ `TOP.cpu.sii_l2t6_req[26] ^ `TOP.cpu.sii_l2t6_req[27] ^ `TOP.cpu.sii_l2t6_req[29] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t6_req_vld,13))) && ($0in_delay(sii_l2t6_req[24] == 0,13)) && ($0in_delay(sii_l2t6_req[25] == 0,13)) && ($0in_delay(sii_l2t6_req[26] == 1,13)) && ($0in_rising_edge($0in_delay(l2t6_sii_iq_dequeue,13))) && !(sii_wri_ecc6_l6_cycle12 == sii_l2b6_ecc[6]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc6_l6_wri_cycle12
*/

wire sii_wri_ecc0_l6_cycle13 =  (`TOP.cpu.sii_l2t6_req[0] ^ `TOP.cpu.sii_l2t6_req[1] ^ `TOP.cpu.sii_l2t6_req[3] ^ `TOP.cpu.sii_l2t6_req[4] ^ `TOP.cpu.sii_l2t6_req[6] ^ `TOP.cpu.sii_l2t6_req[8] ^ `TOP.cpu.sii_l2t6_req[10] ^ `TOP.cpu.sii_l2t6_req[11] ^ `TOP.cpu.sii_l2t6_req[13] ^ `TOP.cpu.sii_l2t6_req[15] ^ `TOP.cpu.sii_l2t6_req[17] ^ `TOP.cpu.sii_l2t6_req[19] ^ `TOP.cpu.sii_l2t6_req[21] ^ `TOP.cpu.sii_l2t6_req[23] ^ `TOP.cpu.sii_l2t6_req[25] ^ `TOP.cpu.sii_l2t6_req[26] ^ `TOP.cpu.sii_l2t6_req[28] ^ `TOP.cpu.sii_l2t6_req[30] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t6_req_vld,14))) && ($0in_delay(sii_l2t6_req[24] == 0,14)) && ($0in_delay(sii_l2t6_req[25] == 0,14)) && ($0in_delay(sii_l2t6_req[26] == 1,14)) && ($0in_rising_edge($0in_delay(l2t6_sii_iq_dequeue,14))) && !(sii_wri_ecc0_l6_cycle13 == sii_l2b6_ecc[0]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc0_l6_wri_cycle13
*/

wire sii_wri_ecc1_l6_cycle13 =  (`TOP.cpu.sii_l2t6_req[0] ^ `TOP.cpu.sii_l2t6_req[2] ^ `TOP.cpu.sii_l2t6_req[3] ^ `TOP.cpu.sii_l2t6_req[5] ^ `TOP.cpu.sii_l2t6_req[6] ^ `TOP.cpu.sii_l2t6_req[9] ^ `TOP.cpu.sii_l2t6_req[10] ^ `TOP.cpu.sii_l2t6_req[12] ^ `TOP.cpu.sii_l2t6_req[13] ^ `TOP.cpu.sii_l2t6_req[16] ^ `TOP.cpu.sii_l2t6_req[17] ^ `TOP.cpu.sii_l2t6_req[20] ^ `TOP.cpu.sii_l2t6_req[21] ^ `TOP.cpu.sii_l2t6_req[24] ^ `TOP.cpu.sii_l2t6_req[25] ^ `TOP.cpu.sii_l2t6_req[27] ^ `TOP.cpu.sii_l2t6_req[28] ^ `TOP.cpu.sii_l2t6_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t6_req_vld,14))) && ($0in_delay(sii_l2t6_req[24] == 0,14)) && ($0in_delay(sii_l2t6_req[25] == 0,14)) && ($0in_delay(sii_l2t6_req[26] == 1,14)) && ($0in_rising_edge($0in_delay(l2t6_sii_iq_dequeue,14))) && !(sii_wri_ecc1_l6_cycle13 == sii_l2b6_ecc[1]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc1_l6_wri_cycle13
*/

wire sii_wri_ecc2_l6_cycle13 =  (`TOP.cpu.sii_l2t6_req[1] ^ `TOP.cpu.sii_l2t6_req[2] ^ `TOP.cpu.sii_l2t6_req[3] ^ `TOP.cpu.sii_l2t6_req[7] ^ `TOP.cpu.sii_l2t6_req[8] ^ `TOP.cpu.sii_l2t6_req[9] ^ `TOP.cpu.sii_l2t6_req[10] ^ `TOP.cpu.sii_l2t6_req[14] ^ `TOP.cpu.sii_l2t6_req[15] ^ `TOP.cpu.sii_l2t6_req[16] ^ `TOP.cpu.sii_l2t6_req[17] ^ `TOP.cpu.sii_l2t6_req[22] ^ `TOP.cpu.sii_l2t6_req[23] ^ `TOP.cpu.sii_l2t6_req[24] ^ `TOP.cpu.sii_l2t6_req[25] ^ `TOP.cpu.sii_l2t6_req[29] ^ `TOP.cpu.sii_l2t6_req[30] ^ `TOP.cpu.sii_l2t6_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t6_req_vld,14))) && ($0in_delay(sii_l2t6_req[24] == 0,14)) && ($0in_delay(sii_l2t6_req[25] == 0,14)) && ($0in_delay(sii_l2t6_req[26] == 1,14)) && ($0in_rising_edge($0in_delay(l2t6_sii_iq_dequeue,14))) && !(sii_wri_ecc2_l6_cycle13 == sii_l2b6_ecc[2]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc2_l6_wri_cycle13
*/

wire sii_wri_ecc3_l6_cycle13 =  (`TOP.cpu.sii_l2t6_req[4] ^ `TOP.cpu.sii_l2t6_req[5] ^ `TOP.cpu.sii_l2t6_req[6] ^ `TOP.cpu.sii_l2t6_req[7] ^ `TOP.cpu.sii_l2t6_req[8] ^ `TOP.cpu.sii_l2t6_req[9] ^ `TOP.cpu.sii_l2t6_req[10] ^ `TOP.cpu.sii_l2t6_req[18] ^ `TOP.cpu.sii_l2t6_req[19] ^ `TOP.cpu.sii_l2t6_req[20] ^ `TOP.cpu.sii_l2t6_req[21] ^ `TOP.cpu.sii_l2t6_req[22] ^ `TOP.cpu.sii_l2t6_req[23] ^ `TOP.cpu.sii_l2t6_req[24] ^ `TOP.cpu.sii_l2t6_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t6_req_vld,14))) && ($0in_delay(sii_l2t6_req[24] == 0,14)) && ($0in_delay(sii_l2t6_req[25] == 0,14)) && ($0in_delay(sii_l2t6_req[26] == 1,14)) && ($0in_rising_edge($0in_delay(l2t6_sii_iq_dequeue,14))) && !(sii_wri_ecc3_l6_cycle13 == sii_l2b6_ecc[3]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc3_l6_wri_cycle13
*/

wire sii_wri_ecc4_l6_cycle13 =  ( `TOP.cpu.sii_l2t6_req[11] ^ `TOP.cpu.sii_l2t6_req[12] ^ `TOP.cpu.sii_l2t6_req[13] ^ `TOP.cpu.sii_l2t6_req[14] ^ `TOP.cpu.sii_l2t6_req[15] ^ `TOP.cpu.sii_l2t6_req[16] ^ `TOP.cpu.sii_l2t6_req[17] ^ `TOP.cpu.sii_l2t6_req[18] ^ `TOP.cpu.sii_l2t6_req[19] ^ `TOP.cpu.sii_l2t6_req[20] ^ `TOP.cpu.sii_l2t6_req[21] ^ `TOP.cpu.sii_l2t6_req[22] ^ `TOP.cpu.sii_l2t6_req[23] ^ `TOP.cpu.sii_l2t6_req[24] ^ `TOP.cpu.sii_l2t6_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t6_req_vld,14))) && ($0in_delay(sii_l2t6_req[24] == 0,14)) && ($0in_delay(sii_l2t6_req[25] == 0,14)) && ($0in_delay(sii_l2t6_req[26] == 1,14)) && ($0in_rising_edge($0in_delay(l2t6_sii_iq_dequeue,14))) && !(sii_wri_ecc4_l6_cycle13 == sii_l2b6_ecc[4]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc4_l6_wri_cycle13
*/

wire sii_wri_ecc5_l6_cycle13 =  (`TOP.cpu.sii_l2t6_req[26] ^ `TOP.cpu.sii_l2t6_req[27] ^ `TOP.cpu.sii_l2t6_req[28] ^ `TOP.cpu.sii_l2t6_req[29] ^ `TOP.cpu.sii_l2t6_req[30] ^ `TOP.cpu.sii_l2t6_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t6_req_vld,14))) && ($0in_delay(sii_l2t6_req[24] == 0,14)) && ($0in_delay(sii_l2t6_req[25] == 0,14)) && ($0in_delay(sii_l2t6_req[26] == 1,14)) && ($0in_rising_edge($0in_delay(l2t6_sii_iq_dequeue,14))) && !(sii_wri_ecc5_l6_cycle13 == sii_l2b6_ecc[5]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc5_l6_wri_cycle13
*/

wire sii_wri_ecc6_l6_cycle13 =  (`TOP.cpu.sii_l2t6_req[0] ^ `TOP.cpu.sii_l2t6_req[1] ^ `TOP.cpu.sii_l2t6_req[2] ^ `TOP.cpu.sii_l2t6_req[4] ^ `TOP.cpu.sii_l2t6_req[5] ^ `TOP.cpu.sii_l2t6_req[7] ^ `TOP.cpu.sii_l2t6_req[10] ^ `TOP.cpu.sii_l2t6_req[11] ^ `TOP.cpu.sii_l2t6_req[12] ^ `TOP.cpu.sii_l2t6_req[14] ^ `TOP.cpu.sii_l2t6_req[17] ^ `TOP.cpu.sii_l2t6_req[18] ^ `TOP.cpu.sii_l2t6_req[21] ^ `TOP.cpu.sii_l2t6_req[23] ^ `TOP.cpu.sii_l2t6_req[24] ^ `TOP.cpu.sii_l2t6_req[26] ^ `TOP.cpu.sii_l2t6_req[27] ^ `TOP.cpu.sii_l2t6_req[29] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t6_req_vld,14))) && ($0in_delay(sii_l2t6_req[24] == 0,14)) && ($0in_delay(sii_l2t6_req[25] == 0,14)) && ($0in_delay(sii_l2t6_req[26] == 1,14)) && ($0in_rising_edge($0in_delay(l2t6_sii_iq_dequeue,14))) && !(sii_wri_ecc6_l6_cycle13 == sii_l2b6_ecc[6]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc6_l6_wri_cycle13
*/

wire sii_wri_ecc0_l6_cycle14 =  (`TOP.cpu.sii_l2t6_req[0] ^ `TOP.cpu.sii_l2t6_req[1] ^ `TOP.cpu.sii_l2t6_req[3] ^ `TOP.cpu.sii_l2t6_req[4] ^ `TOP.cpu.sii_l2t6_req[6] ^ `TOP.cpu.sii_l2t6_req[8] ^ `TOP.cpu.sii_l2t6_req[10] ^ `TOP.cpu.sii_l2t6_req[11] ^ `TOP.cpu.sii_l2t6_req[13] ^ `TOP.cpu.sii_l2t6_req[15] ^ `TOP.cpu.sii_l2t6_req[17] ^ `TOP.cpu.sii_l2t6_req[19] ^ `TOP.cpu.sii_l2t6_req[21] ^ `TOP.cpu.sii_l2t6_req[23] ^ `TOP.cpu.sii_l2t6_req[25] ^ `TOP.cpu.sii_l2t6_req[26] ^ `TOP.cpu.sii_l2t6_req[28] ^ `TOP.cpu.sii_l2t6_req[30] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t6_req_vld,15))) && ($0in_delay(sii_l2t6_req[24] == 0,15)) && ($0in_delay(sii_l2t6_req[25] == 0,15)) && ($0in_delay(sii_l2t6_req[26] == 1,15)) && ($0in_rising_edge($0in_delay(l2t6_sii_iq_dequeue,15))) && !(sii_wri_ecc0_l6_cycle14 == sii_l2b6_ecc[0]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc0_l6_wri_cycle14
*/

wire sii_wri_ecc1_l6_cycle14 =  (`TOP.cpu.sii_l2t6_req[0] ^ `TOP.cpu.sii_l2t6_req[2] ^ `TOP.cpu.sii_l2t6_req[3] ^ `TOP.cpu.sii_l2t6_req[5] ^ `TOP.cpu.sii_l2t6_req[6] ^ `TOP.cpu.sii_l2t6_req[9] ^ `TOP.cpu.sii_l2t6_req[10] ^ `TOP.cpu.sii_l2t6_req[12] ^ `TOP.cpu.sii_l2t6_req[13] ^ `TOP.cpu.sii_l2t6_req[16] ^ `TOP.cpu.sii_l2t6_req[17] ^ `TOP.cpu.sii_l2t6_req[20] ^ `TOP.cpu.sii_l2t6_req[21] ^ `TOP.cpu.sii_l2t6_req[24] ^ `TOP.cpu.sii_l2t6_req[25] ^ `TOP.cpu.sii_l2t6_req[27] ^ `TOP.cpu.sii_l2t6_req[28] ^ `TOP.cpu.sii_l2t6_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t6_req_vld,15))) && ($0in_delay(sii_l2t6_req[24] == 0,15)) && ($0in_delay(sii_l2t6_req[25] == 0,15)) && ($0in_delay(sii_l2t6_req[26] == 1,15)) && ($0in_rising_edge($0in_delay(l2t6_sii_iq_dequeue,15))) && !(sii_wri_ecc1_l6_cycle14 == sii_l2b6_ecc[1]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc1_l6_wri_cycle14
*/

wire sii_wri_ecc2_l6_cycle14 =  (`TOP.cpu.sii_l2t6_req[1] ^ `TOP.cpu.sii_l2t6_req[2] ^ `TOP.cpu.sii_l2t6_req[3] ^ `TOP.cpu.sii_l2t6_req[7] ^ `TOP.cpu.sii_l2t6_req[8] ^ `TOP.cpu.sii_l2t6_req[9] ^ `TOP.cpu.sii_l2t6_req[10] ^ `TOP.cpu.sii_l2t6_req[14] ^ `TOP.cpu.sii_l2t6_req[15] ^ `TOP.cpu.sii_l2t6_req[16] ^ `TOP.cpu.sii_l2t6_req[17] ^ `TOP.cpu.sii_l2t6_req[22] ^ `TOP.cpu.sii_l2t6_req[23] ^ `TOP.cpu.sii_l2t6_req[24] ^ `TOP.cpu.sii_l2t6_req[25] ^ `TOP.cpu.sii_l2t6_req[29] ^ `TOP.cpu.sii_l2t6_req[30] ^ `TOP.cpu.sii_l2t6_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t6_req_vld,15))) && ($0in_delay(sii_l2t6_req[24] == 0,15)) && ($0in_delay(sii_l2t6_req[25] == 0,15)) && ($0in_delay(sii_l2t6_req[26] == 1,15)) && ($0in_rising_edge($0in_delay(l2t6_sii_iq_dequeue,15))) && !(sii_wri_ecc2_l6_cycle14 == sii_l2b6_ecc[2]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc2_l6_wri_cycle14
*/

wire sii_wri_ecc3_l6_cycle14 =  (`TOP.cpu.sii_l2t6_req[4] ^ `TOP.cpu.sii_l2t6_req[5] ^ `TOP.cpu.sii_l2t6_req[6] ^ `TOP.cpu.sii_l2t6_req[7] ^ `TOP.cpu.sii_l2t6_req[8] ^ `TOP.cpu.sii_l2t6_req[9] ^ `TOP.cpu.sii_l2t6_req[10] ^ `TOP.cpu.sii_l2t6_req[18] ^ `TOP.cpu.sii_l2t6_req[19] ^ `TOP.cpu.sii_l2t6_req[20] ^ `TOP.cpu.sii_l2t6_req[21] ^ `TOP.cpu.sii_l2t6_req[22] ^ `TOP.cpu.sii_l2t6_req[23] ^ `TOP.cpu.sii_l2t6_req[24] ^ `TOP.cpu.sii_l2t6_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t6_req_vld,15))) && ($0in_delay(sii_l2t6_req[24] == 0,15)) && ($0in_delay(sii_l2t6_req[25] == 0,15)) && ($0in_delay(sii_l2t6_req[26] == 1,15)) && ($0in_rising_edge($0in_delay(l2t6_sii_iq_dequeue,15))) && !(sii_wri_ecc3_l6_cycle14 == sii_l2b6_ecc[3]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc3_l6_wri_cycle14
*/

wire sii_wri_ecc4_l6_cycle14 =  ( `TOP.cpu.sii_l2t6_req[11] ^ `TOP.cpu.sii_l2t6_req[12] ^ `TOP.cpu.sii_l2t6_req[13] ^ `TOP.cpu.sii_l2t6_req[14] ^ `TOP.cpu.sii_l2t6_req[15] ^ `TOP.cpu.sii_l2t6_req[16] ^ `TOP.cpu.sii_l2t6_req[17] ^ `TOP.cpu.sii_l2t6_req[18] ^ `TOP.cpu.sii_l2t6_req[19] ^ `TOP.cpu.sii_l2t6_req[20] ^ `TOP.cpu.sii_l2t6_req[21] ^ `TOP.cpu.sii_l2t6_req[22] ^ `TOP.cpu.sii_l2t6_req[23] ^ `TOP.cpu.sii_l2t6_req[24] ^ `TOP.cpu.sii_l2t6_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t6_req_vld,15))) && ($0in_delay(sii_l2t6_req[24] == 0,15)) && ($0in_delay(sii_l2t6_req[25] == 0,15)) && ($0in_delay(sii_l2t6_req[26] == 1,15)) && ($0in_rising_edge($0in_delay(l2t6_sii_iq_dequeue,15))) && !(sii_wri_ecc4_l6_cycle14 == sii_l2b6_ecc[4]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc4_l6_wri_cycle14
*/

wire sii_wri_ecc5_l6_cycle14 =  (`TOP.cpu.sii_l2t6_req[26] ^ `TOP.cpu.sii_l2t6_req[27] ^ `TOP.cpu.sii_l2t6_req[28] ^ `TOP.cpu.sii_l2t6_req[29] ^ `TOP.cpu.sii_l2t6_req[30] ^ `TOP.cpu.sii_l2t6_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t6_req_vld,15))) && ($0in_delay(sii_l2t6_req[24] == 0,15)) && ($0in_delay(sii_l2t6_req[25] == 0,15)) && ($0in_delay(sii_l2t6_req[26] == 1,15)) && ($0in_rising_edge($0in_delay(l2t6_sii_iq_dequeue,15))) && !(sii_wri_ecc5_l6_cycle14 == sii_l2b6_ecc[5]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc5_l6_wri_cycle14
*/

wire sii_wri_ecc6_l6_cycle14 =  (`TOP.cpu.sii_l2t6_req[0] ^ `TOP.cpu.sii_l2t6_req[1] ^ `TOP.cpu.sii_l2t6_req[2] ^ `TOP.cpu.sii_l2t6_req[4] ^ `TOP.cpu.sii_l2t6_req[5] ^ `TOP.cpu.sii_l2t6_req[7] ^ `TOP.cpu.sii_l2t6_req[10] ^ `TOP.cpu.sii_l2t6_req[11] ^ `TOP.cpu.sii_l2t6_req[12] ^ `TOP.cpu.sii_l2t6_req[14] ^ `TOP.cpu.sii_l2t6_req[17] ^ `TOP.cpu.sii_l2t6_req[18] ^ `TOP.cpu.sii_l2t6_req[21] ^ `TOP.cpu.sii_l2t6_req[23] ^ `TOP.cpu.sii_l2t6_req[24] ^ `TOP.cpu.sii_l2t6_req[26] ^ `TOP.cpu.sii_l2t6_req[27] ^ `TOP.cpu.sii_l2t6_req[29] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t6_req_vld,15))) && ($0in_delay(sii_l2t6_req[24] == 0,15)) && ($0in_delay(sii_l2t6_req[25] == 0,15)) && ($0in_delay(sii_l2t6_req[26] == 1,15)) && ($0in_rising_edge($0in_delay(l2t6_sii_iq_dequeue,15))) && !(sii_wri_ecc6_l6_cycle14 == sii_l2b6_ecc[6]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc6_l6_wri_cycle14
*/

wire sii_wri_ecc0_l6_cycle15 =  (`TOP.cpu.sii_l2t6_req[0] ^ `TOP.cpu.sii_l2t6_req[1] ^ `TOP.cpu.sii_l2t6_req[3] ^ `TOP.cpu.sii_l2t6_req[4] ^ `TOP.cpu.sii_l2t6_req[6] ^ `TOP.cpu.sii_l2t6_req[8] ^ `TOP.cpu.sii_l2t6_req[10] ^ `TOP.cpu.sii_l2t6_req[11] ^ `TOP.cpu.sii_l2t6_req[13] ^ `TOP.cpu.sii_l2t6_req[15] ^ `TOP.cpu.sii_l2t6_req[17] ^ `TOP.cpu.sii_l2t6_req[19] ^ `TOP.cpu.sii_l2t6_req[21] ^ `TOP.cpu.sii_l2t6_req[23] ^ `TOP.cpu.sii_l2t6_req[25] ^ `TOP.cpu.sii_l2t6_req[26] ^ `TOP.cpu.sii_l2t6_req[28] ^ `TOP.cpu.sii_l2t6_req[30] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t6_req_vld,16))) && ($0in_delay(sii_l2t6_req[24] == 0,16)) && ($0in_delay(sii_l2t6_req[25] == 0,16)) && ($0in_delay(sii_l2t6_req[26] == 1,16)) && ($0in_rising_edge($0in_delay(l2t6_sii_iq_dequeue,16))) && !(sii_wri_ecc0_l6_cycle15 == sii_l2b6_ecc[0]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc0_l6_wri_cycle15
*/

wire sii_wri_ecc1_l6_cycle15 =  (`TOP.cpu.sii_l2t6_req[0] ^ `TOP.cpu.sii_l2t6_req[2] ^ `TOP.cpu.sii_l2t6_req[3] ^ `TOP.cpu.sii_l2t6_req[5] ^ `TOP.cpu.sii_l2t6_req[6] ^ `TOP.cpu.sii_l2t6_req[9] ^ `TOP.cpu.sii_l2t6_req[10] ^ `TOP.cpu.sii_l2t6_req[12] ^ `TOP.cpu.sii_l2t6_req[13] ^ `TOP.cpu.sii_l2t6_req[16] ^ `TOP.cpu.sii_l2t6_req[17] ^ `TOP.cpu.sii_l2t6_req[20] ^ `TOP.cpu.sii_l2t6_req[21] ^ `TOP.cpu.sii_l2t6_req[24] ^ `TOP.cpu.sii_l2t6_req[25] ^ `TOP.cpu.sii_l2t6_req[27] ^ `TOP.cpu.sii_l2t6_req[28] ^ `TOP.cpu.sii_l2t6_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t6_req_vld,16))) && ($0in_delay(sii_l2t6_req[24] == 0,16)) && ($0in_delay(sii_l2t6_req[25] == 0,16)) && ($0in_delay(sii_l2t6_req[26] == 1,16)) && ($0in_rising_edge($0in_delay(l2t6_sii_iq_dequeue,16))) && !(sii_wri_ecc1_l6_cycle15 == sii_l2b6_ecc[1]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc1_l6_wri_cycle15
*/

wire sii_wri_ecc2_l6_cycle15 =  (`TOP.cpu.sii_l2t6_req[1] ^ `TOP.cpu.sii_l2t6_req[2] ^ `TOP.cpu.sii_l2t6_req[3] ^ `TOP.cpu.sii_l2t6_req[7] ^ `TOP.cpu.sii_l2t6_req[8] ^ `TOP.cpu.sii_l2t6_req[9] ^ `TOP.cpu.sii_l2t6_req[10] ^ `TOP.cpu.sii_l2t6_req[14] ^ `TOP.cpu.sii_l2t6_req[15] ^ `TOP.cpu.sii_l2t6_req[16] ^ `TOP.cpu.sii_l2t6_req[17] ^ `TOP.cpu.sii_l2t6_req[22] ^ `TOP.cpu.sii_l2t6_req[23] ^ `TOP.cpu.sii_l2t6_req[24] ^ `TOP.cpu.sii_l2t6_req[25] ^ `TOP.cpu.sii_l2t6_req[29] ^ `TOP.cpu.sii_l2t6_req[30] ^ `TOP.cpu.sii_l2t6_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t6_req_vld,16))) && ($0in_delay(sii_l2t6_req[24] == 0,16)) && ($0in_delay(sii_l2t6_req[25] == 0,16)) && ($0in_delay(sii_l2t6_req[26] == 1,16)) && ($0in_rising_edge($0in_delay(l2t6_sii_iq_dequeue,16))) && !(sii_wri_ecc2_l6_cycle15 == sii_l2b6_ecc[2]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc2_l6_wri_cycle15
*/

wire sii_wri_ecc3_l6_cycle15 =  (`TOP.cpu.sii_l2t6_req[4] ^ `TOP.cpu.sii_l2t6_req[5] ^ `TOP.cpu.sii_l2t6_req[6] ^ `TOP.cpu.sii_l2t6_req[7] ^ `TOP.cpu.sii_l2t6_req[8] ^ `TOP.cpu.sii_l2t6_req[9] ^ `TOP.cpu.sii_l2t6_req[10] ^ `TOP.cpu.sii_l2t6_req[18] ^ `TOP.cpu.sii_l2t6_req[19] ^ `TOP.cpu.sii_l2t6_req[20] ^ `TOP.cpu.sii_l2t6_req[21] ^ `TOP.cpu.sii_l2t6_req[22] ^ `TOP.cpu.sii_l2t6_req[23] ^ `TOP.cpu.sii_l2t6_req[24] ^ `TOP.cpu.sii_l2t6_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t6_req_vld,16))) && ($0in_delay(sii_l2t6_req[24] == 0,16)) && ($0in_delay(sii_l2t6_req[25] == 0,16)) && ($0in_delay(sii_l2t6_req[26] == 1,16)) && ($0in_rising_edge($0in_delay(l2t6_sii_iq_dequeue,16))) && !(sii_wri_ecc3_l6_cycle15 == sii_l2b6_ecc[3]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc3_l6_wri_cycle15
*/

wire sii_wri_ecc4_l6_cycle15 =  ( `TOP.cpu.sii_l2t6_req[11] ^ `TOP.cpu.sii_l2t6_req[12] ^ `TOP.cpu.sii_l2t6_req[13] ^ `TOP.cpu.sii_l2t6_req[14] ^ `TOP.cpu.sii_l2t6_req[15] ^ `TOP.cpu.sii_l2t6_req[16] ^ `TOP.cpu.sii_l2t6_req[17] ^ `TOP.cpu.sii_l2t6_req[18] ^ `TOP.cpu.sii_l2t6_req[19] ^ `TOP.cpu.sii_l2t6_req[20] ^ `TOP.cpu.sii_l2t6_req[21] ^ `TOP.cpu.sii_l2t6_req[22] ^ `TOP.cpu.sii_l2t6_req[23] ^ `TOP.cpu.sii_l2t6_req[24] ^ `TOP.cpu.sii_l2t6_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t6_req_vld,16))) && ($0in_delay(sii_l2t6_req[24] == 0,16)) && ($0in_delay(sii_l2t6_req[25] == 0,16)) && ($0in_delay(sii_l2t6_req[26] == 1,16)) && ($0in_rising_edge($0in_delay(l2t6_sii_iq_dequeue,16))) && !(sii_wri_ecc4_l6_cycle15 == sii_l2b6_ecc[4]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc4_l6_wri_cycle15
*/

wire sii_wri_ecc5_l6_cycle15 =  (`TOP.cpu.sii_l2t6_req[26] ^ `TOP.cpu.sii_l2t6_req[27] ^ `TOP.cpu.sii_l2t6_req[28] ^ `TOP.cpu.sii_l2t6_req[29] ^ `TOP.cpu.sii_l2t6_req[30] ^ `TOP.cpu.sii_l2t6_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t6_req_vld,16))) && ($0in_delay(sii_l2t6_req[24] == 0,16)) && ($0in_delay(sii_l2t6_req[25] == 0,16)) && ($0in_delay(sii_l2t6_req[26] == 1,16)) && ($0in_rising_edge($0in_delay(l2t6_sii_iq_dequeue,16))) && !(sii_wri_ecc5_l6_cycle15 == sii_l2b6_ecc[5]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc5_l6_wri_cycle15
*/

wire sii_wri_ecc6_l6_cycle15 =  (`TOP.cpu.sii_l2t6_req[0] ^ `TOP.cpu.sii_l2t6_req[1] ^ `TOP.cpu.sii_l2t6_req[2] ^ `TOP.cpu.sii_l2t6_req[4] ^ `TOP.cpu.sii_l2t6_req[5] ^ `TOP.cpu.sii_l2t6_req[7] ^ `TOP.cpu.sii_l2t6_req[10] ^ `TOP.cpu.sii_l2t6_req[11] ^ `TOP.cpu.sii_l2t6_req[12] ^ `TOP.cpu.sii_l2t6_req[14] ^ `TOP.cpu.sii_l2t6_req[17] ^ `TOP.cpu.sii_l2t6_req[18] ^ `TOP.cpu.sii_l2t6_req[21] ^ `TOP.cpu.sii_l2t6_req[23] ^ `TOP.cpu.sii_l2t6_req[24] ^ `TOP.cpu.sii_l2t6_req[26] ^ `TOP.cpu.sii_l2t6_req[27] ^ `TOP.cpu.sii_l2t6_req[29] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t6_req_vld,16))) && ($0in_delay(sii_l2t6_req[24] == 0,16)) && ($0in_delay(sii_l2t6_req[25] == 0,16)) && ($0in_delay(sii_l2t6_req[26] == 1,16)) && ($0in_rising_edge($0in_delay(l2t6_sii_iq_dequeue,16))) && !(sii_wri_ecc6_l6_cycle15 == sii_l2b6_ecc[6]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc6_l6_wri_cycle15
*/

wire sii_wri_ecc0_l6_cycle16 =  (`TOP.cpu.sii_l2t6_req[0] ^ `TOP.cpu.sii_l2t6_req[1] ^ `TOP.cpu.sii_l2t6_req[3] ^ `TOP.cpu.sii_l2t6_req[4] ^ `TOP.cpu.sii_l2t6_req[6] ^ `TOP.cpu.sii_l2t6_req[8] ^ `TOP.cpu.sii_l2t6_req[10] ^ `TOP.cpu.sii_l2t6_req[11] ^ `TOP.cpu.sii_l2t6_req[13] ^ `TOP.cpu.sii_l2t6_req[15] ^ `TOP.cpu.sii_l2t6_req[17] ^ `TOP.cpu.sii_l2t6_req[19] ^ `TOP.cpu.sii_l2t6_req[21] ^ `TOP.cpu.sii_l2t6_req[23] ^ `TOP.cpu.sii_l2t6_req[25] ^ `TOP.cpu.sii_l2t6_req[26] ^ `TOP.cpu.sii_l2t6_req[28] ^ `TOP.cpu.sii_l2t6_req[30] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t6_req_vld,17))) && ($0in_delay(sii_l2t6_req[24] == 0,17)) && ($0in_delay(sii_l2t6_req[25] == 0,17)) && ($0in_delay(sii_l2t6_req[26] == 1,17)) && ($0in_rising_edge($0in_delay(l2t6_sii_iq_dequeue,17))) && !(sii_wri_ecc0_l6_cycle16 == sii_l2b6_ecc[0]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc0_l6_wri_cycle16
*/

wire sii_wri_ecc1_l6_cycle16 =  (`TOP.cpu.sii_l2t6_req[0] ^ `TOP.cpu.sii_l2t6_req[2] ^ `TOP.cpu.sii_l2t6_req[3] ^ `TOP.cpu.sii_l2t6_req[5] ^ `TOP.cpu.sii_l2t6_req[6] ^ `TOP.cpu.sii_l2t6_req[9] ^ `TOP.cpu.sii_l2t6_req[10] ^ `TOP.cpu.sii_l2t6_req[12] ^ `TOP.cpu.sii_l2t6_req[13] ^ `TOP.cpu.sii_l2t6_req[16] ^ `TOP.cpu.sii_l2t6_req[17] ^ `TOP.cpu.sii_l2t6_req[20] ^ `TOP.cpu.sii_l2t6_req[21] ^ `TOP.cpu.sii_l2t6_req[24] ^ `TOP.cpu.sii_l2t6_req[25] ^ `TOP.cpu.sii_l2t6_req[27] ^ `TOP.cpu.sii_l2t6_req[28] ^ `TOP.cpu.sii_l2t6_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t6_req_vld,17))) && ($0in_delay(sii_l2t6_req[24] == 0,17)) && ($0in_delay(sii_l2t6_req[25] == 0,17)) && ($0in_delay(sii_l2t6_req[26] == 1,17)) && ($0in_rising_edge($0in_delay(l2t6_sii_iq_dequeue,17))) && !(sii_wri_ecc1_l6_cycle16 == sii_l2b6_ecc[1]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc1_l6_wri_cycle16
*/

wire sii_wri_ecc2_l6_cycle16 =  (`TOP.cpu.sii_l2t6_req[1] ^ `TOP.cpu.sii_l2t6_req[2] ^ `TOP.cpu.sii_l2t6_req[3] ^ `TOP.cpu.sii_l2t6_req[7] ^ `TOP.cpu.sii_l2t6_req[8] ^ `TOP.cpu.sii_l2t6_req[9] ^ `TOP.cpu.sii_l2t6_req[10] ^ `TOP.cpu.sii_l2t6_req[14] ^ `TOP.cpu.sii_l2t6_req[15] ^ `TOP.cpu.sii_l2t6_req[16] ^ `TOP.cpu.sii_l2t6_req[17] ^ `TOP.cpu.sii_l2t6_req[22] ^ `TOP.cpu.sii_l2t6_req[23] ^ `TOP.cpu.sii_l2t6_req[24] ^ `TOP.cpu.sii_l2t6_req[25] ^ `TOP.cpu.sii_l2t6_req[29] ^ `TOP.cpu.sii_l2t6_req[30] ^ `TOP.cpu.sii_l2t6_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t6_req_vld,17))) && ($0in_delay(sii_l2t6_req[24] == 0,17)) && ($0in_delay(sii_l2t6_req[25] == 0,17)) && ($0in_delay(sii_l2t6_req[26] == 1,17)) && ($0in_rising_edge($0in_delay(l2t6_sii_iq_dequeue,17))) && !(sii_wri_ecc2_l6_cycle16 == sii_l2b6_ecc[2]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc2_l6_wri_cycle16
*/

wire sii_wri_ecc3_l6_cycle16 =  (`TOP.cpu.sii_l2t6_req[4] ^ `TOP.cpu.sii_l2t6_req[5] ^ `TOP.cpu.sii_l2t6_req[6] ^ `TOP.cpu.sii_l2t6_req[7] ^ `TOP.cpu.sii_l2t6_req[8] ^ `TOP.cpu.sii_l2t6_req[9] ^ `TOP.cpu.sii_l2t6_req[10] ^ `TOP.cpu.sii_l2t6_req[18] ^ `TOP.cpu.sii_l2t6_req[19] ^ `TOP.cpu.sii_l2t6_req[20] ^ `TOP.cpu.sii_l2t6_req[21] ^ `TOP.cpu.sii_l2t6_req[22] ^ `TOP.cpu.sii_l2t6_req[23] ^ `TOP.cpu.sii_l2t6_req[24] ^ `TOP.cpu.sii_l2t6_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t6_req_vld,17))) && ($0in_delay(sii_l2t6_req[24] == 0,17)) && ($0in_delay(sii_l2t6_req[25] == 0,17)) && ($0in_delay(sii_l2t6_req[26] == 1,17)) && ($0in_rising_edge($0in_delay(l2t6_sii_iq_dequeue,17))) && !(sii_wri_ecc3_l6_cycle16 == sii_l2b6_ecc[3]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc3_l6_wri_cycle16
*/

wire sii_wri_ecc4_l6_cycle16 =  ( `TOP.cpu.sii_l2t6_req[11] ^ `TOP.cpu.sii_l2t6_req[12] ^ `TOP.cpu.sii_l2t6_req[13] ^ `TOP.cpu.sii_l2t6_req[14] ^ `TOP.cpu.sii_l2t6_req[15] ^ `TOP.cpu.sii_l2t6_req[16] ^ `TOP.cpu.sii_l2t6_req[17] ^ `TOP.cpu.sii_l2t6_req[18] ^ `TOP.cpu.sii_l2t6_req[19] ^ `TOP.cpu.sii_l2t6_req[20] ^ `TOP.cpu.sii_l2t6_req[21] ^ `TOP.cpu.sii_l2t6_req[22] ^ `TOP.cpu.sii_l2t6_req[23] ^ `TOP.cpu.sii_l2t6_req[24] ^ `TOP.cpu.sii_l2t6_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t6_req_vld,17))) && ($0in_delay(sii_l2t6_req[24] == 0,17)) && ($0in_delay(sii_l2t6_req[25] == 0,17)) && ($0in_delay(sii_l2t6_req[26] == 1,17)) && ($0in_rising_edge($0in_delay(l2t6_sii_iq_dequeue,17))) && !(sii_wri_ecc4_l6_cycle16 == sii_l2b6_ecc[4]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc4_l6_wri_cycle16
*/

wire sii_wri_ecc5_l6_cycle16 =  (`TOP.cpu.sii_l2t6_req[26] ^ `TOP.cpu.sii_l2t6_req[27] ^ `TOP.cpu.sii_l2t6_req[28] ^ `TOP.cpu.sii_l2t6_req[29] ^ `TOP.cpu.sii_l2t6_req[30] ^ `TOP.cpu.sii_l2t6_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t6_req_vld,17))) && ($0in_delay(sii_l2t6_req[24] == 0,17)) && ($0in_delay(sii_l2t6_req[25] == 0,17)) && ($0in_delay(sii_l2t6_req[26] == 1,17)) && ($0in_rising_edge($0in_delay(l2t6_sii_iq_dequeue,17))) && !(sii_wri_ecc5_l6_cycle16 == sii_l2b6_ecc[5]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc5_l6_wri_cycle16
*/

wire sii_wri_ecc6_l6_cycle16 =  (`TOP.cpu.sii_l2t6_req[0] ^ `TOP.cpu.sii_l2t6_req[1] ^ `TOP.cpu.sii_l2t6_req[2] ^ `TOP.cpu.sii_l2t6_req[4] ^ `TOP.cpu.sii_l2t6_req[5] ^ `TOP.cpu.sii_l2t6_req[7] ^ `TOP.cpu.sii_l2t6_req[10] ^ `TOP.cpu.sii_l2t6_req[11] ^ `TOP.cpu.sii_l2t6_req[12] ^ `TOP.cpu.sii_l2t6_req[14] ^ `TOP.cpu.sii_l2t6_req[17] ^ `TOP.cpu.sii_l2t6_req[18] ^ `TOP.cpu.sii_l2t6_req[21] ^ `TOP.cpu.sii_l2t6_req[23] ^ `TOP.cpu.sii_l2t6_req[24] ^ `TOP.cpu.sii_l2t6_req[26] ^ `TOP.cpu.sii_l2t6_req[27] ^ `TOP.cpu.sii_l2t6_req[29] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t6_req_vld,17))) && ($0in_delay(sii_l2t6_req[24] == 0,17)) && ($0in_delay(sii_l2t6_req[25] == 0,17)) && ($0in_delay(sii_l2t6_req[26] == 1,17)) && ($0in_rising_edge($0in_delay(l2t6_sii_iq_dequeue,17))) && !(sii_wri_ecc6_l6_cycle16 == sii_l2b6_ecc[6]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc6_l6_wri_cycle16
*/

wire sii_wri_ecc0_l7_cycle1 =  (`TOP.cpu.sii_l2t7_req[0] ^ `TOP.cpu.sii_l2t7_req[1] ^ `TOP.cpu.sii_l2t7_req[3] ^ `TOP.cpu.sii_l2t7_req[4] ^ `TOP.cpu.sii_l2t7_req[6] ^ `TOP.cpu.sii_l2t7_req[8] ^ `TOP.cpu.sii_l2t7_req[10] ^ `TOP.cpu.sii_l2t7_req[11] ^ `TOP.cpu.sii_l2t7_req[13] ^ `TOP.cpu.sii_l2t7_req[15] ^ `TOP.cpu.sii_l2t7_req[17] ^ `TOP.cpu.sii_l2t7_req[19] ^ `TOP.cpu.sii_l2t7_req[21] ^ `TOP.cpu.sii_l2t7_req[23] ^ `TOP.cpu.sii_l2t7_req[25] ^ `TOP.cpu.sii_l2t7_req[26] ^ `TOP.cpu.sii_l2t7_req[28] ^ `TOP.cpu.sii_l2t7_req[30] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t7_req_vld,2))) && ($0in_delay(sii_l2t7_req[24] == 0,2)) && ($0in_delay(sii_l2t7_req[25] == 0,2)) && ($0in_delay(sii_l2t7_req[26] == 1,2)) && ($0in_rising_edge($0in_delay(l2t7_sii_iq_dequeue,2))) && !(sii_wri_ecc0_l7_cycle1 == sii_l2b7_ecc[0]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc0_l7_wri_cycle1
*/

wire sii_wri_ecc1_l7_cycle1 =  (`TOP.cpu.sii_l2t7_req[0] ^ `TOP.cpu.sii_l2t7_req[2] ^ `TOP.cpu.sii_l2t7_req[3] ^ `TOP.cpu.sii_l2t7_req[5] ^ `TOP.cpu.sii_l2t7_req[6] ^ `TOP.cpu.sii_l2t7_req[9] ^ `TOP.cpu.sii_l2t7_req[10] ^ `TOP.cpu.sii_l2t7_req[12] ^ `TOP.cpu.sii_l2t7_req[13] ^ `TOP.cpu.sii_l2t7_req[16] ^ `TOP.cpu.sii_l2t7_req[17] ^ `TOP.cpu.sii_l2t7_req[20] ^ `TOP.cpu.sii_l2t7_req[21] ^ `TOP.cpu.sii_l2t7_req[24] ^ `TOP.cpu.sii_l2t7_req[25] ^ `TOP.cpu.sii_l2t7_req[27] ^ `TOP.cpu.sii_l2t7_req[28] ^ `TOP.cpu.sii_l2t7_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t7_req_vld,2))) && ($0in_delay(sii_l2t7_req[24] == 0,2)) && ($0in_delay(sii_l2t7_req[25] == 0,2)) && ($0in_delay(sii_l2t7_req[26] == 1,2)) && ($0in_rising_edge($0in_delay(l2t7_sii_iq_dequeue,2))) && !(sii_wri_ecc1_l7_cycle1 == sii_l2b7_ecc[1]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc1_l7_wri_cycle1
*/

wire sii_wri_ecc2_l7_cycle1 =  (`TOP.cpu.sii_l2t7_req[1] ^ `TOP.cpu.sii_l2t7_req[2] ^ `TOP.cpu.sii_l2t7_req[3] ^ `TOP.cpu.sii_l2t7_req[7] ^ `TOP.cpu.sii_l2t7_req[8] ^ `TOP.cpu.sii_l2t7_req[9] ^ `TOP.cpu.sii_l2t7_req[10] ^ `TOP.cpu.sii_l2t7_req[14] ^ `TOP.cpu.sii_l2t7_req[15] ^ `TOP.cpu.sii_l2t7_req[16] ^ `TOP.cpu.sii_l2t7_req[17] ^ `TOP.cpu.sii_l2t7_req[22] ^ `TOP.cpu.sii_l2t7_req[23] ^ `TOP.cpu.sii_l2t7_req[24] ^ `TOP.cpu.sii_l2t7_req[25] ^ `TOP.cpu.sii_l2t7_req[29] ^ `TOP.cpu.sii_l2t7_req[30] ^ `TOP.cpu.sii_l2t7_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t7_req_vld,2))) && ($0in_delay(sii_l2t7_req[24] == 0,2)) && ($0in_delay(sii_l2t7_req[25] == 0,2)) && ($0in_delay(sii_l2t7_req[26] == 1,2)) && ($0in_rising_edge($0in_delay(l2t7_sii_iq_dequeue,2))) && !(sii_wri_ecc2_l7_cycle1 == sii_l2b7_ecc[2]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc2_l7_wri_cycle1
*/

wire sii_wri_ecc3_l7_cycle1 =  (`TOP.cpu.sii_l2t7_req[4] ^ `TOP.cpu.sii_l2t7_req[5] ^ `TOP.cpu.sii_l2t7_req[6] ^ `TOP.cpu.sii_l2t7_req[7] ^ `TOP.cpu.sii_l2t7_req[8] ^ `TOP.cpu.sii_l2t7_req[9] ^ `TOP.cpu.sii_l2t7_req[10] ^ `TOP.cpu.sii_l2t7_req[18] ^ `TOP.cpu.sii_l2t7_req[19] ^ `TOP.cpu.sii_l2t7_req[20] ^ `TOP.cpu.sii_l2t7_req[21] ^ `TOP.cpu.sii_l2t7_req[22] ^ `TOP.cpu.sii_l2t7_req[23] ^ `TOP.cpu.sii_l2t7_req[24] ^ `TOP.cpu.sii_l2t7_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t7_req_vld,2))) && ($0in_delay(sii_l2t7_req[24] == 0,2)) && ($0in_delay(sii_l2t7_req[25] == 0,2)) && ($0in_delay(sii_l2t7_req[26] == 1,2)) && ($0in_rising_edge($0in_delay(l2t7_sii_iq_dequeue,2))) && !(sii_wri_ecc3_l7_cycle1 == sii_l2b7_ecc[3]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc3_l7_wri_cycle1
*/

wire sii_wri_ecc4_l7_cycle1 =  ( `TOP.cpu.sii_l2t7_req[11] ^ `TOP.cpu.sii_l2t7_req[12] ^ `TOP.cpu.sii_l2t7_req[13] ^ `TOP.cpu.sii_l2t7_req[14] ^ `TOP.cpu.sii_l2t7_req[15] ^ `TOP.cpu.sii_l2t7_req[16] ^ `TOP.cpu.sii_l2t7_req[17] ^ `TOP.cpu.sii_l2t7_req[18] ^ `TOP.cpu.sii_l2t7_req[19] ^ `TOP.cpu.sii_l2t7_req[20] ^ `TOP.cpu.sii_l2t7_req[21] ^ `TOP.cpu.sii_l2t7_req[22] ^ `TOP.cpu.sii_l2t7_req[23] ^ `TOP.cpu.sii_l2t7_req[24] ^ `TOP.cpu.sii_l2t7_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t7_req_vld,2))) && ($0in_delay(sii_l2t7_req[24] == 0,2)) && ($0in_delay(sii_l2t7_req[25] == 0,2)) && ($0in_delay(sii_l2t7_req[26] == 1,2)) && ($0in_rising_edge($0in_delay(l2t7_sii_iq_dequeue,2))) && !(sii_wri_ecc4_l7_cycle1 == sii_l2b7_ecc[4]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc4_l7_wri_cycle1
*/

wire sii_wri_ecc5_l7_cycle1 =  (`TOP.cpu.sii_l2t7_req[26] ^ `TOP.cpu.sii_l2t7_req[27] ^ `TOP.cpu.sii_l2t7_req[28] ^ `TOP.cpu.sii_l2t7_req[29] ^ `TOP.cpu.sii_l2t7_req[30] ^ `TOP.cpu.sii_l2t7_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t7_req_vld,2))) && ($0in_delay(sii_l2t7_req[24] == 0,2)) && ($0in_delay(sii_l2t7_req[25] == 0,2)) && ($0in_delay(sii_l2t7_req[26] == 1,2)) && ($0in_rising_edge($0in_delay(l2t7_sii_iq_dequeue,2))) && !(sii_wri_ecc5_l7_cycle1 == sii_l2b7_ecc[5]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc5_l7_wri_cycle1
*/

wire sii_wri_ecc6_l7_cycle1 =  (`TOP.cpu.sii_l2t7_req[0] ^ `TOP.cpu.sii_l2t7_req[1] ^ `TOP.cpu.sii_l2t7_req[2] ^ `TOP.cpu.sii_l2t7_req[4] ^ `TOP.cpu.sii_l2t7_req[5] ^ `TOP.cpu.sii_l2t7_req[7] ^ `TOP.cpu.sii_l2t7_req[10] ^ `TOP.cpu.sii_l2t7_req[11] ^ `TOP.cpu.sii_l2t7_req[12] ^ `TOP.cpu.sii_l2t7_req[14] ^ `TOP.cpu.sii_l2t7_req[17] ^ `TOP.cpu.sii_l2t7_req[18] ^ `TOP.cpu.sii_l2t7_req[21] ^ `TOP.cpu.sii_l2t7_req[23] ^ `TOP.cpu.sii_l2t7_req[24] ^ `TOP.cpu.sii_l2t7_req[26] ^ `TOP.cpu.sii_l2t7_req[27] ^ `TOP.cpu.sii_l2t7_req[29] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t7_req_vld,2))) && ($0in_delay(sii_l2t7_req[24] == 0,2)) && ($0in_delay(sii_l2t7_req[25] == 0,2)) && ($0in_delay(sii_l2t7_req[26] == 1,2)) && ($0in_rising_edge($0in_delay(l2t7_sii_iq_dequeue,2))) && !(sii_wri_ecc6_l7_cycle1 == sii_l2b7_ecc[6]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc6_l7_wri_cycle1
*/

wire sii_wri_ecc0_l7_cycle2 =  (`TOP.cpu.sii_l2t7_req[0] ^ `TOP.cpu.sii_l2t7_req[1] ^ `TOP.cpu.sii_l2t7_req[3] ^ `TOP.cpu.sii_l2t7_req[4] ^ `TOP.cpu.sii_l2t7_req[6] ^ `TOP.cpu.sii_l2t7_req[8] ^ `TOP.cpu.sii_l2t7_req[10] ^ `TOP.cpu.sii_l2t7_req[11] ^ `TOP.cpu.sii_l2t7_req[13] ^ `TOP.cpu.sii_l2t7_req[15] ^ `TOP.cpu.sii_l2t7_req[17] ^ `TOP.cpu.sii_l2t7_req[19] ^ `TOP.cpu.sii_l2t7_req[21] ^ `TOP.cpu.sii_l2t7_req[23] ^ `TOP.cpu.sii_l2t7_req[25] ^ `TOP.cpu.sii_l2t7_req[26] ^ `TOP.cpu.sii_l2t7_req[28] ^ `TOP.cpu.sii_l2t7_req[30] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t7_req_vld,3))) && ($0in_delay(sii_l2t7_req[24] == 0,3)) && ($0in_delay(sii_l2t7_req[25] == 0,3)) && ($0in_delay(sii_l2t7_req[26] == 1,3)) && ($0in_rising_edge($0in_delay(l2t7_sii_iq_dequeue,3))) && !(sii_wri_ecc0_l7_cycle2 == sii_l2b7_ecc[0]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc0_l7_wri_cycle2
*/

wire sii_wri_ecc1_l7_cycle2 =  (`TOP.cpu.sii_l2t7_req[0] ^ `TOP.cpu.sii_l2t7_req[2] ^ `TOP.cpu.sii_l2t7_req[3] ^ `TOP.cpu.sii_l2t7_req[5] ^ `TOP.cpu.sii_l2t7_req[6] ^ `TOP.cpu.sii_l2t7_req[9] ^ `TOP.cpu.sii_l2t7_req[10] ^ `TOP.cpu.sii_l2t7_req[12] ^ `TOP.cpu.sii_l2t7_req[13] ^ `TOP.cpu.sii_l2t7_req[16] ^ `TOP.cpu.sii_l2t7_req[17] ^ `TOP.cpu.sii_l2t7_req[20] ^ `TOP.cpu.sii_l2t7_req[21] ^ `TOP.cpu.sii_l2t7_req[24] ^ `TOP.cpu.sii_l2t7_req[25] ^ `TOP.cpu.sii_l2t7_req[27] ^ `TOP.cpu.sii_l2t7_req[28] ^ `TOP.cpu.sii_l2t7_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t7_req_vld,3))) && ($0in_delay(sii_l2t7_req[24] == 0,3)) && ($0in_delay(sii_l2t7_req[25] == 0,3)) && ($0in_delay(sii_l2t7_req[26] == 1,3)) && ($0in_rising_edge($0in_delay(l2t7_sii_iq_dequeue,3))) && !(sii_wri_ecc1_l7_cycle2 == sii_l2b7_ecc[1]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc1_l7_wri_cycle2
*/

wire sii_wri_ecc2_l7_cycle2 =  (`TOP.cpu.sii_l2t7_req[1] ^ `TOP.cpu.sii_l2t7_req[2] ^ `TOP.cpu.sii_l2t7_req[3] ^ `TOP.cpu.sii_l2t7_req[7] ^ `TOP.cpu.sii_l2t7_req[8] ^ `TOP.cpu.sii_l2t7_req[9] ^ `TOP.cpu.sii_l2t7_req[10] ^ `TOP.cpu.sii_l2t7_req[14] ^ `TOP.cpu.sii_l2t7_req[15] ^ `TOP.cpu.sii_l2t7_req[16] ^ `TOP.cpu.sii_l2t7_req[17] ^ `TOP.cpu.sii_l2t7_req[22] ^ `TOP.cpu.sii_l2t7_req[23] ^ `TOP.cpu.sii_l2t7_req[24] ^ `TOP.cpu.sii_l2t7_req[25] ^ `TOP.cpu.sii_l2t7_req[29] ^ `TOP.cpu.sii_l2t7_req[30] ^ `TOP.cpu.sii_l2t7_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t7_req_vld,3))) && ($0in_delay(sii_l2t7_req[24] == 0,3)) && ($0in_delay(sii_l2t7_req[25] == 0,3)) && ($0in_delay(sii_l2t7_req[26] == 1,3)) && ($0in_rising_edge($0in_delay(l2t7_sii_iq_dequeue,3))) && !(sii_wri_ecc2_l7_cycle2 == sii_l2b7_ecc[2]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc2_l7_wri_cycle2
*/

wire sii_wri_ecc3_l7_cycle2 =  (`TOP.cpu.sii_l2t7_req[4] ^ `TOP.cpu.sii_l2t7_req[5] ^ `TOP.cpu.sii_l2t7_req[6] ^ `TOP.cpu.sii_l2t7_req[7] ^ `TOP.cpu.sii_l2t7_req[8] ^ `TOP.cpu.sii_l2t7_req[9] ^ `TOP.cpu.sii_l2t7_req[10] ^ `TOP.cpu.sii_l2t7_req[18] ^ `TOP.cpu.sii_l2t7_req[19] ^ `TOP.cpu.sii_l2t7_req[20] ^ `TOP.cpu.sii_l2t7_req[21] ^ `TOP.cpu.sii_l2t7_req[22] ^ `TOP.cpu.sii_l2t7_req[23] ^ `TOP.cpu.sii_l2t7_req[24] ^ `TOP.cpu.sii_l2t7_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t7_req_vld,3))) && ($0in_delay(sii_l2t7_req[24] == 0,3)) && ($0in_delay(sii_l2t7_req[25] == 0,3)) && ($0in_delay(sii_l2t7_req[26] == 1,3)) && ($0in_rising_edge($0in_delay(l2t7_sii_iq_dequeue,3))) && !(sii_wri_ecc3_l7_cycle2 == sii_l2b7_ecc[3]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc3_l7_wri_cycle2
*/

wire sii_wri_ecc4_l7_cycle2 =  ( `TOP.cpu.sii_l2t7_req[11] ^ `TOP.cpu.sii_l2t7_req[12] ^ `TOP.cpu.sii_l2t7_req[13] ^ `TOP.cpu.sii_l2t7_req[14] ^ `TOP.cpu.sii_l2t7_req[15] ^ `TOP.cpu.sii_l2t7_req[16] ^ `TOP.cpu.sii_l2t7_req[17] ^ `TOP.cpu.sii_l2t7_req[18] ^ `TOP.cpu.sii_l2t7_req[19] ^ `TOP.cpu.sii_l2t7_req[20] ^ `TOP.cpu.sii_l2t7_req[21] ^ `TOP.cpu.sii_l2t7_req[22] ^ `TOP.cpu.sii_l2t7_req[23] ^ `TOP.cpu.sii_l2t7_req[24] ^ `TOP.cpu.sii_l2t7_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t7_req_vld,3))) && ($0in_delay(sii_l2t7_req[24] == 0,3)) && ($0in_delay(sii_l2t7_req[25] == 0,3)) && ($0in_delay(sii_l2t7_req[26] == 1,3)) && ($0in_rising_edge($0in_delay(l2t7_sii_iq_dequeue,3))) && !(sii_wri_ecc4_l7_cycle2 == sii_l2b7_ecc[4]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc4_l7_wri_cycle2
*/

wire sii_wri_ecc5_l7_cycle2 =  (`TOP.cpu.sii_l2t7_req[26] ^ `TOP.cpu.sii_l2t7_req[27] ^ `TOP.cpu.sii_l2t7_req[28] ^ `TOP.cpu.sii_l2t7_req[29] ^ `TOP.cpu.sii_l2t7_req[30] ^ `TOP.cpu.sii_l2t7_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t7_req_vld,3))) && ($0in_delay(sii_l2t7_req[24] == 0,3)) && ($0in_delay(sii_l2t7_req[25] == 0,3)) && ($0in_delay(sii_l2t7_req[26] == 1,3)) && ($0in_rising_edge($0in_delay(l2t7_sii_iq_dequeue,3))) && !(sii_wri_ecc5_l7_cycle2 == sii_l2b7_ecc[5]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc5_l7_wri_cycle2
*/

wire sii_wri_ecc6_l7_cycle2 =  (`TOP.cpu.sii_l2t7_req[0] ^ `TOP.cpu.sii_l2t7_req[1] ^ `TOP.cpu.sii_l2t7_req[2] ^ `TOP.cpu.sii_l2t7_req[4] ^ `TOP.cpu.sii_l2t7_req[5] ^ `TOP.cpu.sii_l2t7_req[7] ^ `TOP.cpu.sii_l2t7_req[10] ^ `TOP.cpu.sii_l2t7_req[11] ^ `TOP.cpu.sii_l2t7_req[12] ^ `TOP.cpu.sii_l2t7_req[14] ^ `TOP.cpu.sii_l2t7_req[17] ^ `TOP.cpu.sii_l2t7_req[18] ^ `TOP.cpu.sii_l2t7_req[21] ^ `TOP.cpu.sii_l2t7_req[23] ^ `TOP.cpu.sii_l2t7_req[24] ^ `TOP.cpu.sii_l2t7_req[26] ^ `TOP.cpu.sii_l2t7_req[27] ^ `TOP.cpu.sii_l2t7_req[29] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t7_req_vld,3))) && ($0in_delay(sii_l2t7_req[24] == 0,3)) && ($0in_delay(sii_l2t7_req[25] == 0,3)) && ($0in_delay(sii_l2t7_req[26] == 1,3)) && ($0in_rising_edge($0in_delay(l2t7_sii_iq_dequeue,3))) && !(sii_wri_ecc6_l7_cycle2 == sii_l2b7_ecc[6]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc6_l7_wri_cycle2
*/

wire sii_wri_ecc0_l7_cycle3 =  (`TOP.cpu.sii_l2t7_req[0] ^ `TOP.cpu.sii_l2t7_req[1] ^ `TOP.cpu.sii_l2t7_req[3] ^ `TOP.cpu.sii_l2t7_req[4] ^ `TOP.cpu.sii_l2t7_req[6] ^ `TOP.cpu.sii_l2t7_req[8] ^ `TOP.cpu.sii_l2t7_req[10] ^ `TOP.cpu.sii_l2t7_req[11] ^ `TOP.cpu.sii_l2t7_req[13] ^ `TOP.cpu.sii_l2t7_req[15] ^ `TOP.cpu.sii_l2t7_req[17] ^ `TOP.cpu.sii_l2t7_req[19] ^ `TOP.cpu.sii_l2t7_req[21] ^ `TOP.cpu.sii_l2t7_req[23] ^ `TOP.cpu.sii_l2t7_req[25] ^ `TOP.cpu.sii_l2t7_req[26] ^ `TOP.cpu.sii_l2t7_req[28] ^ `TOP.cpu.sii_l2t7_req[30] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t7_req_vld,4))) && ($0in_delay(sii_l2t7_req[24] == 0,4)) && ($0in_delay(sii_l2t7_req[25] == 0,4)) && ($0in_delay(sii_l2t7_req[26] == 1,4)) && ($0in_rising_edge($0in_delay(l2t7_sii_iq_dequeue,4))) && !(sii_wri_ecc0_l7_cycle3 == sii_l2b7_ecc[0]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc0_l7_wri_cycle3
*/

wire sii_wri_ecc1_l7_cycle3 =  (`TOP.cpu.sii_l2t7_req[0] ^ `TOP.cpu.sii_l2t7_req[2] ^ `TOP.cpu.sii_l2t7_req[3] ^ `TOP.cpu.sii_l2t7_req[5] ^ `TOP.cpu.sii_l2t7_req[6] ^ `TOP.cpu.sii_l2t7_req[9] ^ `TOP.cpu.sii_l2t7_req[10] ^ `TOP.cpu.sii_l2t7_req[12] ^ `TOP.cpu.sii_l2t7_req[13] ^ `TOP.cpu.sii_l2t7_req[16] ^ `TOP.cpu.sii_l2t7_req[17] ^ `TOP.cpu.sii_l2t7_req[20] ^ `TOP.cpu.sii_l2t7_req[21] ^ `TOP.cpu.sii_l2t7_req[24] ^ `TOP.cpu.sii_l2t7_req[25] ^ `TOP.cpu.sii_l2t7_req[27] ^ `TOP.cpu.sii_l2t7_req[28] ^ `TOP.cpu.sii_l2t7_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t7_req_vld,4))) && ($0in_delay(sii_l2t7_req[24] == 0,4)) && ($0in_delay(sii_l2t7_req[25] == 0,4)) && ($0in_delay(sii_l2t7_req[26] == 1,4)) && ($0in_rising_edge($0in_delay(l2t7_sii_iq_dequeue,4))) && !(sii_wri_ecc1_l7_cycle3 == sii_l2b7_ecc[1]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc1_l7_wri_cycle3
*/

wire sii_wri_ecc2_l7_cycle3 =  (`TOP.cpu.sii_l2t7_req[1] ^ `TOP.cpu.sii_l2t7_req[2] ^ `TOP.cpu.sii_l2t7_req[3] ^ `TOP.cpu.sii_l2t7_req[7] ^ `TOP.cpu.sii_l2t7_req[8] ^ `TOP.cpu.sii_l2t7_req[9] ^ `TOP.cpu.sii_l2t7_req[10] ^ `TOP.cpu.sii_l2t7_req[14] ^ `TOP.cpu.sii_l2t7_req[15] ^ `TOP.cpu.sii_l2t7_req[16] ^ `TOP.cpu.sii_l2t7_req[17] ^ `TOP.cpu.sii_l2t7_req[22] ^ `TOP.cpu.sii_l2t7_req[23] ^ `TOP.cpu.sii_l2t7_req[24] ^ `TOP.cpu.sii_l2t7_req[25] ^ `TOP.cpu.sii_l2t7_req[29] ^ `TOP.cpu.sii_l2t7_req[30] ^ `TOP.cpu.sii_l2t7_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t7_req_vld,4))) && ($0in_delay(sii_l2t7_req[24] == 0,4)) && ($0in_delay(sii_l2t7_req[25] == 0,4)) && ($0in_delay(sii_l2t7_req[26] == 1,4)) && ($0in_rising_edge($0in_delay(l2t7_sii_iq_dequeue,4))) && !(sii_wri_ecc2_l7_cycle3 == sii_l2b7_ecc[2]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc2_l7_wri_cycle3
*/

wire sii_wri_ecc3_l7_cycle3 =  (`TOP.cpu.sii_l2t7_req[4] ^ `TOP.cpu.sii_l2t7_req[5] ^ `TOP.cpu.sii_l2t7_req[6] ^ `TOP.cpu.sii_l2t7_req[7] ^ `TOP.cpu.sii_l2t7_req[8] ^ `TOP.cpu.sii_l2t7_req[9] ^ `TOP.cpu.sii_l2t7_req[10] ^ `TOP.cpu.sii_l2t7_req[18] ^ `TOP.cpu.sii_l2t7_req[19] ^ `TOP.cpu.sii_l2t7_req[20] ^ `TOP.cpu.sii_l2t7_req[21] ^ `TOP.cpu.sii_l2t7_req[22] ^ `TOP.cpu.sii_l2t7_req[23] ^ `TOP.cpu.sii_l2t7_req[24] ^ `TOP.cpu.sii_l2t7_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t7_req_vld,4))) && ($0in_delay(sii_l2t7_req[24] == 0,4)) && ($0in_delay(sii_l2t7_req[25] == 0,4)) && ($0in_delay(sii_l2t7_req[26] == 1,4)) && ($0in_rising_edge($0in_delay(l2t7_sii_iq_dequeue,4))) && !(sii_wri_ecc3_l7_cycle3 == sii_l2b7_ecc[3]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc3_l7_wri_cycle3
*/

wire sii_wri_ecc4_l7_cycle3 =  ( `TOP.cpu.sii_l2t7_req[11] ^ `TOP.cpu.sii_l2t7_req[12] ^ `TOP.cpu.sii_l2t7_req[13] ^ `TOP.cpu.sii_l2t7_req[14] ^ `TOP.cpu.sii_l2t7_req[15] ^ `TOP.cpu.sii_l2t7_req[16] ^ `TOP.cpu.sii_l2t7_req[17] ^ `TOP.cpu.sii_l2t7_req[18] ^ `TOP.cpu.sii_l2t7_req[19] ^ `TOP.cpu.sii_l2t7_req[20] ^ `TOP.cpu.sii_l2t7_req[21] ^ `TOP.cpu.sii_l2t7_req[22] ^ `TOP.cpu.sii_l2t7_req[23] ^ `TOP.cpu.sii_l2t7_req[24] ^ `TOP.cpu.sii_l2t7_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t7_req_vld,4))) && ($0in_delay(sii_l2t7_req[24] == 0,4)) && ($0in_delay(sii_l2t7_req[25] == 0,4)) && ($0in_delay(sii_l2t7_req[26] == 1,4)) && ($0in_rising_edge($0in_delay(l2t7_sii_iq_dequeue,4))) && !(sii_wri_ecc4_l7_cycle3 == sii_l2b7_ecc[4]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc4_l7_wri_cycle3
*/

wire sii_wri_ecc5_l7_cycle3 =  (`TOP.cpu.sii_l2t7_req[26] ^ `TOP.cpu.sii_l2t7_req[27] ^ `TOP.cpu.sii_l2t7_req[28] ^ `TOP.cpu.sii_l2t7_req[29] ^ `TOP.cpu.sii_l2t7_req[30] ^ `TOP.cpu.sii_l2t7_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t7_req_vld,4))) && ($0in_delay(sii_l2t7_req[24] == 0,4)) && ($0in_delay(sii_l2t7_req[25] == 0,4)) && ($0in_delay(sii_l2t7_req[26] == 1,4)) && ($0in_rising_edge($0in_delay(l2t7_sii_iq_dequeue,4))) && !(sii_wri_ecc5_l7_cycle3 == sii_l2b7_ecc[5]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc5_l7_wri_cycle3
*/

wire sii_wri_ecc6_l7_cycle3 =  (`TOP.cpu.sii_l2t7_req[0] ^ `TOP.cpu.sii_l2t7_req[1] ^ `TOP.cpu.sii_l2t7_req[2] ^ `TOP.cpu.sii_l2t7_req[4] ^ `TOP.cpu.sii_l2t7_req[5] ^ `TOP.cpu.sii_l2t7_req[7] ^ `TOP.cpu.sii_l2t7_req[10] ^ `TOP.cpu.sii_l2t7_req[11] ^ `TOP.cpu.sii_l2t7_req[12] ^ `TOP.cpu.sii_l2t7_req[14] ^ `TOP.cpu.sii_l2t7_req[17] ^ `TOP.cpu.sii_l2t7_req[18] ^ `TOP.cpu.sii_l2t7_req[21] ^ `TOP.cpu.sii_l2t7_req[23] ^ `TOP.cpu.sii_l2t7_req[24] ^ `TOP.cpu.sii_l2t7_req[26] ^ `TOP.cpu.sii_l2t7_req[27] ^ `TOP.cpu.sii_l2t7_req[29] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t7_req_vld,4))) && ($0in_delay(sii_l2t7_req[24] == 0,4)) && ($0in_delay(sii_l2t7_req[25] == 0,2)) && ($0in_delay(sii_l2t7_req[26] == 1,4)) && ($0in_rising_edge($0in_delay(l2t7_sii_iq_dequeue,4))) && !(sii_wri_ecc6_l7_cycle3 == sii_l2b7_ecc[6]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc6_l7_wri_cycle3
*/

wire sii_wri_ecc0_l7_cycle4 =  (`TOP.cpu.sii_l2t7_req[0] ^ `TOP.cpu.sii_l2t7_req[1] ^ `TOP.cpu.sii_l2t7_req[3] ^ `TOP.cpu.sii_l2t7_req[4] ^ `TOP.cpu.sii_l2t7_req[6] ^ `TOP.cpu.sii_l2t7_req[8] ^ `TOP.cpu.sii_l2t7_req[10] ^ `TOP.cpu.sii_l2t7_req[11] ^ `TOP.cpu.sii_l2t7_req[13] ^ `TOP.cpu.sii_l2t7_req[15] ^ `TOP.cpu.sii_l2t7_req[17] ^ `TOP.cpu.sii_l2t7_req[19] ^ `TOP.cpu.sii_l2t7_req[21] ^ `TOP.cpu.sii_l2t7_req[23] ^ `TOP.cpu.sii_l2t7_req[25] ^ `TOP.cpu.sii_l2t7_req[26] ^ `TOP.cpu.sii_l2t7_req[28] ^ `TOP.cpu.sii_l2t7_req[30] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t7_req_vld,5))) && ($0in_delay(sii_l2t7_req[24] == 0,5)) && ($0in_delay(sii_l2t7_req[25] == 0,5)) && ($0in_delay(sii_l2t7_req[26] == 1,5)) && ($0in_rising_edge($0in_delay(l2t7_sii_iq_dequeue,5))) && !(sii_wri_ecc0_l7_cycle4 == sii_l2b7_ecc[0]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc0_l7_wri_cycle4
*/

wire sii_wri_ecc1_l7_cycle4 =  (`TOP.cpu.sii_l2t7_req[0] ^ `TOP.cpu.sii_l2t7_req[2] ^ `TOP.cpu.sii_l2t7_req[3] ^ `TOP.cpu.sii_l2t7_req[5] ^ `TOP.cpu.sii_l2t7_req[6] ^ `TOP.cpu.sii_l2t7_req[9] ^ `TOP.cpu.sii_l2t7_req[10] ^ `TOP.cpu.sii_l2t7_req[12] ^ `TOP.cpu.sii_l2t7_req[13] ^ `TOP.cpu.sii_l2t7_req[16] ^ `TOP.cpu.sii_l2t7_req[17] ^ `TOP.cpu.sii_l2t7_req[20] ^ `TOP.cpu.sii_l2t7_req[21] ^ `TOP.cpu.sii_l2t7_req[24] ^ `TOP.cpu.sii_l2t7_req[25] ^ `TOP.cpu.sii_l2t7_req[27] ^ `TOP.cpu.sii_l2t7_req[28] ^ `TOP.cpu.sii_l2t7_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t7_req_vld,5))) && ($0in_delay(sii_l2t7_req[24] == 0,5)) && ($0in_delay(sii_l2t7_req[25] == 0,5)) && ($0in_delay(sii_l2t7_req[26] == 1,5)) && ($0in_rising_edge($0in_delay(l2t7_sii_iq_dequeue,5))) && !(sii_wri_ecc1_l7_cycle4 == sii_l2b7_ecc[1]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc1_l7_wri_cycle4
*/

wire sii_wri_ecc2_l7_cycle4 =  (`TOP.cpu.sii_l2t7_req[1] ^ `TOP.cpu.sii_l2t7_req[2] ^ `TOP.cpu.sii_l2t7_req[3] ^ `TOP.cpu.sii_l2t7_req[7] ^ `TOP.cpu.sii_l2t7_req[8] ^ `TOP.cpu.sii_l2t7_req[9] ^ `TOP.cpu.sii_l2t7_req[10] ^ `TOP.cpu.sii_l2t7_req[14] ^ `TOP.cpu.sii_l2t7_req[15] ^ `TOP.cpu.sii_l2t7_req[16] ^ `TOP.cpu.sii_l2t7_req[17] ^ `TOP.cpu.sii_l2t7_req[22] ^ `TOP.cpu.sii_l2t7_req[23] ^ `TOP.cpu.sii_l2t7_req[24] ^ `TOP.cpu.sii_l2t7_req[25] ^ `TOP.cpu.sii_l2t7_req[29] ^ `TOP.cpu.sii_l2t7_req[30] ^ `TOP.cpu.sii_l2t7_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t7_req_vld,5))) && ($0in_delay(sii_l2t7_req[24] == 0,5)) && ($0in_delay(sii_l2t7_req[25] == 0,5)) && ($0in_delay(sii_l2t7_req[26] == 1,5)) && ($0in_rising_edge($0in_delay(l2t7_sii_iq_dequeue,5))) && !(sii_wri_ecc2_l7_cycle4 == sii_l2b7_ecc[2]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc2_l7_wri_cycle4
*/

wire sii_wri_ecc3_l7_cycle4 =  (`TOP.cpu.sii_l2t7_req[4] ^ `TOP.cpu.sii_l2t7_req[5] ^ `TOP.cpu.sii_l2t7_req[6] ^ `TOP.cpu.sii_l2t7_req[7] ^ `TOP.cpu.sii_l2t7_req[8] ^ `TOP.cpu.sii_l2t7_req[9] ^ `TOP.cpu.sii_l2t7_req[10] ^ `TOP.cpu.sii_l2t7_req[18] ^ `TOP.cpu.sii_l2t7_req[19] ^ `TOP.cpu.sii_l2t7_req[20] ^ `TOP.cpu.sii_l2t7_req[21] ^ `TOP.cpu.sii_l2t7_req[22] ^ `TOP.cpu.sii_l2t7_req[23] ^ `TOP.cpu.sii_l2t7_req[24] ^ `TOP.cpu.sii_l2t7_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t7_req_vld,5))) && ($0in_delay(sii_l2t7_req[24] == 0,5)) && ($0in_delay(sii_l2t7_req[25] == 0,5)) && ($0in_delay(sii_l2t7_req[26] == 1,5)) && ($0in_rising_edge($0in_delay(l2t7_sii_iq_dequeue,5))) && !(sii_wri_ecc3_l7_cycle4 == sii_l2b7_ecc[3]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc3_l7_wri_cycle4
*/

wire sii_wri_ecc4_l7_cycle4 =  ( `TOP.cpu.sii_l2t7_req[11] ^ `TOP.cpu.sii_l2t7_req[12] ^ `TOP.cpu.sii_l2t7_req[13] ^ `TOP.cpu.sii_l2t7_req[14] ^ `TOP.cpu.sii_l2t7_req[15] ^ `TOP.cpu.sii_l2t7_req[16] ^ `TOP.cpu.sii_l2t7_req[17] ^ `TOP.cpu.sii_l2t7_req[18] ^ `TOP.cpu.sii_l2t7_req[19] ^ `TOP.cpu.sii_l2t7_req[20] ^ `TOP.cpu.sii_l2t7_req[21] ^ `TOP.cpu.sii_l2t7_req[22] ^ `TOP.cpu.sii_l2t7_req[23] ^ `TOP.cpu.sii_l2t7_req[24] ^ `TOP.cpu.sii_l2t7_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t7_req_vld,5))) && ($0in_delay(sii_l2t7_req[24] == 0,5)) && ($0in_delay(sii_l2t7_req[25] == 0,5)) && ($0in_delay(sii_l2t7_req[26] == 1,5)) && ($0in_rising_edge($0in_delay(l2t7_sii_iq_dequeue,5))) && !(sii_wri_ecc4_l7_cycle4 == sii_l2b7_ecc[4]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc4_l7_wri_cycle4
*/

wire sii_wri_ecc5_l7_cycle4 =  (`TOP.cpu.sii_l2t7_req[26] ^ `TOP.cpu.sii_l2t7_req[27] ^ `TOP.cpu.sii_l2t7_req[28] ^ `TOP.cpu.sii_l2t7_req[29] ^ `TOP.cpu.sii_l2t7_req[30] ^ `TOP.cpu.sii_l2t7_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t7_req_vld,5))) && ($0in_delay(sii_l2t7_req[24] == 0,5)) && ($0in_delay(sii_l2t7_req[25] == 0,5)) && ($0in_delay(sii_l2t7_req[26] == 1,5)) && ($0in_rising_edge($0in_delay(l2t7_sii_iq_dequeue,5))) && !(sii_wri_ecc5_l7_cycle4 == sii_l2b7_ecc[5]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc5_l7_wri_cycle4
*/

wire sii_wri_ecc6_l7_cycle4 =  (`TOP.cpu.sii_l2t7_req[0] ^ `TOP.cpu.sii_l2t7_req[1] ^ `TOP.cpu.sii_l2t7_req[2] ^ `TOP.cpu.sii_l2t7_req[4] ^ `TOP.cpu.sii_l2t7_req[5] ^ `TOP.cpu.sii_l2t7_req[7] ^ `TOP.cpu.sii_l2t7_req[10] ^ `TOP.cpu.sii_l2t7_req[11] ^ `TOP.cpu.sii_l2t7_req[12] ^ `TOP.cpu.sii_l2t7_req[14] ^ `TOP.cpu.sii_l2t7_req[17] ^ `TOP.cpu.sii_l2t7_req[18] ^ `TOP.cpu.sii_l2t7_req[21] ^ `TOP.cpu.sii_l2t7_req[23] ^ `TOP.cpu.sii_l2t7_req[24] ^ `TOP.cpu.sii_l2t7_req[26] ^ `TOP.cpu.sii_l2t7_req[27] ^ `TOP.cpu.sii_l2t7_req[29] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t7_req_vld,5))) && ($0in_delay(sii_l2t7_req[24] == 0,5)) && ($0in_delay(sii_l2t7_req[25] == 0,5)) && ($0in_delay(sii_l2t7_req[26] == 1,5)) && ($0in_rising_edge($0in_delay(l2t7_sii_iq_dequeue,5))) && !(sii_wri_ecc6_l7_cycle4 == sii_l2b7_ecc[6]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc6_l7_wri_cycle4
*/

wire sii_wri_ecc0_l7_cycle5 =  (`TOP.cpu.sii_l2t7_req[0] ^ `TOP.cpu.sii_l2t7_req[1] ^ `TOP.cpu.sii_l2t7_req[3] ^ `TOP.cpu.sii_l2t7_req[4] ^ `TOP.cpu.sii_l2t7_req[6] ^ `TOP.cpu.sii_l2t7_req[8] ^ `TOP.cpu.sii_l2t7_req[10] ^ `TOP.cpu.sii_l2t7_req[11] ^ `TOP.cpu.sii_l2t7_req[13] ^ `TOP.cpu.sii_l2t7_req[15] ^ `TOP.cpu.sii_l2t7_req[17] ^ `TOP.cpu.sii_l2t7_req[19] ^ `TOP.cpu.sii_l2t7_req[21] ^ `TOP.cpu.sii_l2t7_req[23] ^ `TOP.cpu.sii_l2t7_req[25] ^ `TOP.cpu.sii_l2t7_req[26] ^ `TOP.cpu.sii_l2t7_req[28] ^ `TOP.cpu.sii_l2t7_req[30] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t7_req_vld,6))) && ($0in_delay(sii_l2t7_req[24] == 0,6)) && ($0in_delay(sii_l2t7_req[25] == 0,6)) && ($0in_delay(sii_l2t7_req[26] == 1,6)) && ($0in_rising_edge($0in_delay(l2t7_sii_iq_dequeue,6))) && !(sii_wri_ecc0_l7_cycle5 == sii_l2b7_ecc[0]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc0_l7_wri_cycle5
*/

wire sii_wri_ecc1_l7_cycle5 =  (`TOP.cpu.sii_l2t7_req[0] ^ `TOP.cpu.sii_l2t7_req[2] ^ `TOP.cpu.sii_l2t7_req[3] ^ `TOP.cpu.sii_l2t7_req[5] ^ `TOP.cpu.sii_l2t7_req[6] ^ `TOP.cpu.sii_l2t7_req[9] ^ `TOP.cpu.sii_l2t7_req[10] ^ `TOP.cpu.sii_l2t7_req[12] ^ `TOP.cpu.sii_l2t7_req[13] ^ `TOP.cpu.sii_l2t7_req[16] ^ `TOP.cpu.sii_l2t7_req[17] ^ `TOP.cpu.sii_l2t7_req[20] ^ `TOP.cpu.sii_l2t7_req[21] ^ `TOP.cpu.sii_l2t7_req[24] ^ `TOP.cpu.sii_l2t7_req[25] ^ `TOP.cpu.sii_l2t7_req[27] ^ `TOP.cpu.sii_l2t7_req[28] ^ `TOP.cpu.sii_l2t7_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t7_req_vld,6))) && ($0in_delay(sii_l2t7_req[24] == 0,6)) && ($0in_delay(sii_l2t7_req[25] == 0,6)) && ($0in_delay(sii_l2t7_req[26] == 1,6)) && ($0in_rising_edge($0in_delay(l2t7_sii_iq_dequeue,6))) && !(sii_wri_ecc1_l7_cycle5 == sii_l2b7_ecc[1]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc1_l7_wri_cycle5
*/

wire sii_wri_ecc2_l7_cycle5 =  (`TOP.cpu.sii_l2t7_req[1] ^ `TOP.cpu.sii_l2t7_req[2] ^ `TOP.cpu.sii_l2t7_req[3] ^ `TOP.cpu.sii_l2t7_req[7] ^ `TOP.cpu.sii_l2t7_req[8] ^ `TOP.cpu.sii_l2t7_req[9] ^ `TOP.cpu.sii_l2t7_req[10] ^ `TOP.cpu.sii_l2t7_req[14] ^ `TOP.cpu.sii_l2t7_req[15] ^ `TOP.cpu.sii_l2t7_req[16] ^ `TOP.cpu.sii_l2t7_req[17] ^ `TOP.cpu.sii_l2t7_req[22] ^ `TOP.cpu.sii_l2t7_req[23] ^ `TOP.cpu.sii_l2t7_req[24] ^ `TOP.cpu.sii_l2t7_req[25] ^ `TOP.cpu.sii_l2t7_req[29] ^ `TOP.cpu.sii_l2t7_req[30] ^ `TOP.cpu.sii_l2t7_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t7_req_vld,6))) && ($0in_delay(sii_l2t7_req[24] == 0,6)) && ($0in_delay(sii_l2t7_req[25] == 0,6)) && ($0in_delay(sii_l2t7_req[26] == 1,6)) && ($0in_rising_edge($0in_delay(l2t7_sii_iq_dequeue,6))) && !(sii_wri_ecc2_l7_cycle5 == sii_l2b7_ecc[2]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc2_l7_wri_cycle5
*/

wire sii_wri_ecc3_l7_cycle5 =  (`TOP.cpu.sii_l2t7_req[4] ^ `TOP.cpu.sii_l2t7_req[5] ^ `TOP.cpu.sii_l2t7_req[6] ^ `TOP.cpu.sii_l2t7_req[7] ^ `TOP.cpu.sii_l2t7_req[8] ^ `TOP.cpu.sii_l2t7_req[9] ^ `TOP.cpu.sii_l2t7_req[10] ^ `TOP.cpu.sii_l2t7_req[18] ^ `TOP.cpu.sii_l2t7_req[19] ^ `TOP.cpu.sii_l2t7_req[20] ^ `TOP.cpu.sii_l2t7_req[21] ^ `TOP.cpu.sii_l2t7_req[22] ^ `TOP.cpu.sii_l2t7_req[23] ^ `TOP.cpu.sii_l2t7_req[24] ^ `TOP.cpu.sii_l2t7_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t7_req_vld,6))) && ($0in_delay(sii_l2t7_req[24] == 0,6)) && ($0in_delay(sii_l2t7_req[25] == 0,6)) && ($0in_delay(sii_l2t7_req[26] == 1,6)) && ($0in_rising_edge($0in_delay(l2t7_sii_iq_dequeue,6))) && !(sii_wri_ecc3_l7_cycle5 == sii_l2b7_ecc[3]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc3_l7_wri_cycle5
*/

wire sii_wri_ecc4_l7_cycle5 =  ( `TOP.cpu.sii_l2t7_req[11] ^ `TOP.cpu.sii_l2t7_req[12] ^ `TOP.cpu.sii_l2t7_req[13] ^ `TOP.cpu.sii_l2t7_req[14] ^ `TOP.cpu.sii_l2t7_req[15] ^ `TOP.cpu.sii_l2t7_req[16] ^ `TOP.cpu.sii_l2t7_req[17] ^ `TOP.cpu.sii_l2t7_req[18] ^ `TOP.cpu.sii_l2t7_req[19] ^ `TOP.cpu.sii_l2t7_req[20] ^ `TOP.cpu.sii_l2t7_req[21] ^ `TOP.cpu.sii_l2t7_req[22] ^ `TOP.cpu.sii_l2t7_req[23] ^ `TOP.cpu.sii_l2t7_req[24] ^ `TOP.cpu.sii_l2t7_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t7_req_vld,6))) && ($0in_delay(sii_l2t7_req[24] == 0,6)) && ($0in_delay(sii_l2t7_req[25] == 0,6)) && ($0in_delay(sii_l2t7_req[26] == 1,6)) && ($0in_rising_edge($0in_delay(l2t7_sii_iq_dequeue,6))) && !(sii_wri_ecc4_l7_cycle5 == sii_l2b7_ecc[4]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc4_l7_wri_cycle5
*/

wire sii_wri_ecc5_l7_cycle5 =  (`TOP.cpu.sii_l2t7_req[26] ^ `TOP.cpu.sii_l2t7_req[27] ^ `TOP.cpu.sii_l2t7_req[28] ^ `TOP.cpu.sii_l2t7_req[29] ^ `TOP.cpu.sii_l2t7_req[30] ^ `TOP.cpu.sii_l2t7_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t7_req_vld,6))) && ($0in_delay(sii_l2t7_req[24] == 0,6)) && ($0in_delay(sii_l2t7_req[25] == 0,2)) && ($0in_delay(sii_l2t7_req[26] == 1,6)) && ($0in_rising_edge($0in_delay(l2t7_sii_iq_dequeue,6))) && !(sii_wri_ecc5_l7_cycle5 == sii_l2b7_ecc[5]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc5_l7_wri_cycle5
*/

wire sii_wri_ecc6_l7_cycle5 =  (`TOP.cpu.sii_l2t7_req[0] ^ `TOP.cpu.sii_l2t7_req[1] ^ `TOP.cpu.sii_l2t7_req[2] ^ `TOP.cpu.sii_l2t7_req[4] ^ `TOP.cpu.sii_l2t7_req[5] ^ `TOP.cpu.sii_l2t7_req[7] ^ `TOP.cpu.sii_l2t7_req[10] ^ `TOP.cpu.sii_l2t7_req[11] ^ `TOP.cpu.sii_l2t7_req[12] ^ `TOP.cpu.sii_l2t7_req[14] ^ `TOP.cpu.sii_l2t7_req[17] ^ `TOP.cpu.sii_l2t7_req[18] ^ `TOP.cpu.sii_l2t7_req[21] ^ `TOP.cpu.sii_l2t7_req[23] ^ `TOP.cpu.sii_l2t7_req[24] ^ `TOP.cpu.sii_l2t7_req[26] ^ `TOP.cpu.sii_l2t7_req[27] ^ `TOP.cpu.sii_l2t7_req[29] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t7_req_vld,6))) && ($0in_delay(sii_l2t7_req[24] == 0,6)) && ($0in_delay(sii_l2t7_req[25] == 0,6)) && ($0in_delay(sii_l2t7_req[26] == 1,6)) && ($0in_rising_edge($0in_delay(l2t7_sii_iq_dequeue,6))) && !(sii_wri_ecc6_l7_cycle5 == sii_l2b7_ecc[6]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc6_l7_wri_cycle5
*/

wire sii_wri_ecc0_l7_cycle6 =  (`TOP.cpu.sii_l2t7_req[0] ^ `TOP.cpu.sii_l2t7_req[1] ^ `TOP.cpu.sii_l2t7_req[3] ^ `TOP.cpu.sii_l2t7_req[4] ^ `TOP.cpu.sii_l2t7_req[6] ^ `TOP.cpu.sii_l2t7_req[8] ^ `TOP.cpu.sii_l2t7_req[10] ^ `TOP.cpu.sii_l2t7_req[11] ^ `TOP.cpu.sii_l2t7_req[13] ^ `TOP.cpu.sii_l2t7_req[15] ^ `TOP.cpu.sii_l2t7_req[17] ^ `TOP.cpu.sii_l2t7_req[19] ^ `TOP.cpu.sii_l2t7_req[21] ^ `TOP.cpu.sii_l2t7_req[23] ^ `TOP.cpu.sii_l2t7_req[25] ^ `TOP.cpu.sii_l2t7_req[26] ^ `TOP.cpu.sii_l2t7_req[28] ^ `TOP.cpu.sii_l2t7_req[30] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t7_req_vld,7))) && ($0in_delay(sii_l2t7_req[24] == 0,7)) && ($0in_delay(sii_l2t7_req[25] == 0,7)) && ($0in_delay(sii_l2t7_req[26] == 1,7)) && ($0in_rising_edge($0in_delay(l2t7_sii_iq_dequeue,7))) && !(sii_wri_ecc0_l7_cycle6 == sii_l2b7_ecc[0]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc0_l7_wri_cycle6
*/

wire sii_wri_ecc1_l7_cycle6 =  (`TOP.cpu.sii_l2t7_req[0] ^ `TOP.cpu.sii_l2t7_req[2] ^ `TOP.cpu.sii_l2t7_req[3] ^ `TOP.cpu.sii_l2t7_req[5] ^ `TOP.cpu.sii_l2t7_req[6] ^ `TOP.cpu.sii_l2t7_req[9] ^ `TOP.cpu.sii_l2t7_req[10] ^ `TOP.cpu.sii_l2t7_req[12] ^ `TOP.cpu.sii_l2t7_req[13] ^ `TOP.cpu.sii_l2t7_req[16] ^ `TOP.cpu.sii_l2t7_req[17] ^ `TOP.cpu.sii_l2t7_req[20] ^ `TOP.cpu.sii_l2t7_req[21] ^ `TOP.cpu.sii_l2t7_req[24] ^ `TOP.cpu.sii_l2t7_req[25] ^ `TOP.cpu.sii_l2t7_req[27] ^ `TOP.cpu.sii_l2t7_req[28] ^ `TOP.cpu.sii_l2t7_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t7_req_vld,7))) && ($0in_delay(sii_l2t7_req[24] == 0,7)) && ($0in_delay(sii_l2t7_req[25] == 0,7)) && ($0in_delay(sii_l2t7_req[26] == 1,7)) && ($0in_rising_edge($0in_delay(l2t7_sii_iq_dequeue,7))) && !(sii_wri_ecc1_l7_cycle6 == sii_l2b7_ecc[1]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc1_l7_wri_cycle6
*/

wire sii_wri_ecc2_l7_cycle6 =  (`TOP.cpu.sii_l2t7_req[1] ^ `TOP.cpu.sii_l2t7_req[2] ^ `TOP.cpu.sii_l2t7_req[3] ^ `TOP.cpu.sii_l2t7_req[7] ^ `TOP.cpu.sii_l2t7_req[8] ^ `TOP.cpu.sii_l2t7_req[9] ^ `TOP.cpu.sii_l2t7_req[10] ^ `TOP.cpu.sii_l2t7_req[14] ^ `TOP.cpu.sii_l2t7_req[15] ^ `TOP.cpu.sii_l2t7_req[16] ^ `TOP.cpu.sii_l2t7_req[17] ^ `TOP.cpu.sii_l2t7_req[22] ^ `TOP.cpu.sii_l2t7_req[23] ^ `TOP.cpu.sii_l2t7_req[24] ^ `TOP.cpu.sii_l2t7_req[25] ^ `TOP.cpu.sii_l2t7_req[29] ^ `TOP.cpu.sii_l2t7_req[30] ^ `TOP.cpu.sii_l2t7_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t7_req_vld,7))) && ($0in_delay(sii_l2t7_req[24] == 0,7)) && ($0in_delay(sii_l2t7_req[25] == 0,7)) && ($0in_delay(sii_l2t7_req[26] == 1,7)) && ($0in_rising_edge($0in_delay(l2t7_sii_iq_dequeue,7))) && !(sii_wri_ecc2_l7_cycle6 == sii_l2b7_ecc[2]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc2_l7_wri_cycle6
*/

wire sii_wri_ecc3_l7_cycle6 =  (`TOP.cpu.sii_l2t7_req[4] ^ `TOP.cpu.sii_l2t7_req[5] ^ `TOP.cpu.sii_l2t7_req[6] ^ `TOP.cpu.sii_l2t7_req[7] ^ `TOP.cpu.sii_l2t7_req[8] ^ `TOP.cpu.sii_l2t7_req[9] ^ `TOP.cpu.sii_l2t7_req[10] ^ `TOP.cpu.sii_l2t7_req[18] ^ `TOP.cpu.sii_l2t7_req[19] ^ `TOP.cpu.sii_l2t7_req[20] ^ `TOP.cpu.sii_l2t7_req[21] ^ `TOP.cpu.sii_l2t7_req[22] ^ `TOP.cpu.sii_l2t7_req[23] ^ `TOP.cpu.sii_l2t7_req[24] ^ `TOP.cpu.sii_l2t7_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t7_req_vld,7))) && ($0in_delay(sii_l2t7_req[24] == 0,7)) && ($0in_delay(sii_l2t7_req[25] == 0,7)) && ($0in_delay(sii_l2t7_req[26] == 1,7)) && ($0in_rising_edge($0in_delay(l2t7_sii_iq_dequeue,7))) && !(sii_wri_ecc3_l7_cycle6 == sii_l2b7_ecc[3]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc3_l7_wri_cycle6
*/

wire sii_wri_ecc4_l7_cycle6 =  ( `TOP.cpu.sii_l2t7_req[11] ^ `TOP.cpu.sii_l2t7_req[12] ^ `TOP.cpu.sii_l2t7_req[13] ^ `TOP.cpu.sii_l2t7_req[14] ^ `TOP.cpu.sii_l2t7_req[15] ^ `TOP.cpu.sii_l2t7_req[16] ^ `TOP.cpu.sii_l2t7_req[17] ^ `TOP.cpu.sii_l2t7_req[18] ^ `TOP.cpu.sii_l2t7_req[19] ^ `TOP.cpu.sii_l2t7_req[20] ^ `TOP.cpu.sii_l2t7_req[21] ^ `TOP.cpu.sii_l2t7_req[22] ^ `TOP.cpu.sii_l2t7_req[23] ^ `TOP.cpu.sii_l2t7_req[24] ^ `TOP.cpu.sii_l2t7_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t7_req_vld,7))) && ($0in_delay(sii_l2t7_req[24] == 0,7)) && ($0in_delay(sii_l2t7_req[25] == 0,7)) && ($0in_delay(sii_l2t7_req[26] == 1,7)) && ($0in_rising_edge($0in_delay(l2t7_sii_iq_dequeue,7))) && !(sii_wri_ecc4_l7_cycle6 == sii_l2b7_ecc[4]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc4_l7_wri_cycle6
*/

wire sii_wri_ecc5_l7_cycle6 =  (`TOP.cpu.sii_l2t7_req[26] ^ `TOP.cpu.sii_l2t7_req[27] ^ `TOP.cpu.sii_l2t7_req[28] ^ `TOP.cpu.sii_l2t7_req[29] ^ `TOP.cpu.sii_l2t7_req[30] ^ `TOP.cpu.sii_l2t7_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t7_req_vld,7))) && ($0in_delay(sii_l2t7_req[24] == 0,7)) && ($0in_delay(sii_l2t7_req[25] == 0,7)) && ($0in_delay(sii_l2t7_req[26] == 1,7)) && ($0in_rising_edge($0in_delay(l2t7_sii_iq_dequeue,7))) && !(sii_wri_ecc5_l7_cycle6 == sii_l2b7_ecc[5]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc5_l7_wri_cycle6
*/

wire sii_wri_ecc6_l7_cycle6 =  (`TOP.cpu.sii_l2t7_req[0] ^ `TOP.cpu.sii_l2t7_req[1] ^ `TOP.cpu.sii_l2t7_req[2] ^ `TOP.cpu.sii_l2t7_req[4] ^ `TOP.cpu.sii_l2t7_req[5] ^ `TOP.cpu.sii_l2t7_req[7] ^ `TOP.cpu.sii_l2t7_req[10] ^ `TOP.cpu.sii_l2t7_req[11] ^ `TOP.cpu.sii_l2t7_req[12] ^ `TOP.cpu.sii_l2t7_req[14] ^ `TOP.cpu.sii_l2t7_req[17] ^ `TOP.cpu.sii_l2t7_req[18] ^ `TOP.cpu.sii_l2t7_req[21] ^ `TOP.cpu.sii_l2t7_req[23] ^ `TOP.cpu.sii_l2t7_req[24] ^ `TOP.cpu.sii_l2t7_req[26] ^ `TOP.cpu.sii_l2t7_req[27] ^ `TOP.cpu.sii_l2t7_req[29] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t7_req_vld,7))) && ($0in_delay(sii_l2t7_req[24] == 0,7)) && ($0in_delay(sii_l2t7_req[25] == 0,7)) && ($0in_delay(sii_l2t7_req[26] == 1,7)) && ($0in_rising_edge($0in_delay(l2t7_sii_iq_dequeue,7))) && !(sii_wri_ecc6_l7_cycle6 == sii_l2b7_ecc[6]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc6_l7_wri_cycle6
*/

wire sii_wri_ecc0_l7_cycle7 =  (`TOP.cpu.sii_l2t7_req[0] ^ `TOP.cpu.sii_l2t7_req[1] ^ `TOP.cpu.sii_l2t7_req[3] ^ `TOP.cpu.sii_l2t7_req[4] ^ `TOP.cpu.sii_l2t7_req[6] ^ `TOP.cpu.sii_l2t7_req[8] ^ `TOP.cpu.sii_l2t7_req[10] ^ `TOP.cpu.sii_l2t7_req[11] ^ `TOP.cpu.sii_l2t7_req[13] ^ `TOP.cpu.sii_l2t7_req[15] ^ `TOP.cpu.sii_l2t7_req[17] ^ `TOP.cpu.sii_l2t7_req[19] ^ `TOP.cpu.sii_l2t7_req[21] ^ `TOP.cpu.sii_l2t7_req[23] ^ `TOP.cpu.sii_l2t7_req[25] ^ `TOP.cpu.sii_l2t7_req[26] ^ `TOP.cpu.sii_l2t7_req[28] ^ `TOP.cpu.sii_l2t7_req[30] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t7_req_vld,8))) && ($0in_delay(sii_l2t7_req[24] == 0,8)) && ($0in_delay(sii_l2t7_req[25] == 0,8)) && ($0in_delay(sii_l2t7_req[26] == 1,8)) && ($0in_rising_edge($0in_delay(l2t7_sii_iq_dequeue,8))) && !(sii_wri_ecc0_l7_cycle7 == sii_l2b7_ecc[0]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc0_l7_wri_cycle7
*/

wire sii_wri_ecc1_l7_cycle7 =  (`TOP.cpu.sii_l2t7_req[0] ^ `TOP.cpu.sii_l2t7_req[2] ^ `TOP.cpu.sii_l2t7_req[3] ^ `TOP.cpu.sii_l2t7_req[5] ^ `TOP.cpu.sii_l2t7_req[6] ^ `TOP.cpu.sii_l2t7_req[9] ^ `TOP.cpu.sii_l2t7_req[10] ^ `TOP.cpu.sii_l2t7_req[12] ^ `TOP.cpu.sii_l2t7_req[13] ^ `TOP.cpu.sii_l2t7_req[16] ^ `TOP.cpu.sii_l2t7_req[17] ^ `TOP.cpu.sii_l2t7_req[20] ^ `TOP.cpu.sii_l2t7_req[21] ^ `TOP.cpu.sii_l2t7_req[24] ^ `TOP.cpu.sii_l2t7_req[25] ^ `TOP.cpu.sii_l2t7_req[27] ^ `TOP.cpu.sii_l2t7_req[28] ^ `TOP.cpu.sii_l2t7_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t7_req_vld,8))) && ($0in_delay(sii_l2t7_req[24] == 0,8)) && ($0in_delay(sii_l2t7_req[25] == 0,8)) && ($0in_delay(sii_l2t7_req[26] == 1,8)) && ($0in_rising_edge($0in_delay(l2t7_sii_iq_dequeue,8))) && !(sii_wri_ecc1_l7_cycle7 == sii_l2b7_ecc[1]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc1_l7_wri_cycle7
*/

wire sii_wri_ecc2_l7_cycle7 =  (`TOP.cpu.sii_l2t7_req[1] ^ `TOP.cpu.sii_l2t7_req[2] ^ `TOP.cpu.sii_l2t7_req[3] ^ `TOP.cpu.sii_l2t7_req[7] ^ `TOP.cpu.sii_l2t7_req[8] ^ `TOP.cpu.sii_l2t7_req[9] ^ `TOP.cpu.sii_l2t7_req[10] ^ `TOP.cpu.sii_l2t7_req[14] ^ `TOP.cpu.sii_l2t7_req[15] ^ `TOP.cpu.sii_l2t7_req[16] ^ `TOP.cpu.sii_l2t7_req[17] ^ `TOP.cpu.sii_l2t7_req[22] ^ `TOP.cpu.sii_l2t7_req[23] ^ `TOP.cpu.sii_l2t7_req[24] ^ `TOP.cpu.sii_l2t7_req[25] ^ `TOP.cpu.sii_l2t7_req[29] ^ `TOP.cpu.sii_l2t7_req[30] ^ `TOP.cpu.sii_l2t7_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t7_req_vld,8))) && ($0in_delay(sii_l2t7_req[24] == 0,8)) && ($0in_delay(sii_l2t7_req[25] == 0,8)) && ($0in_delay(sii_l2t7_req[26] == 1,8)) && ($0in_rising_edge($0in_delay(l2t7_sii_iq_dequeue,8))) && !(sii_wri_ecc2_l7_cycle7 == sii_l2b7_ecc[2]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc2_l7_wri_cycle7
*/

wire sii_wri_ecc3_l7_cycle7 =  (`TOP.cpu.sii_l2t7_req[4] ^ `TOP.cpu.sii_l2t7_req[5] ^ `TOP.cpu.sii_l2t7_req[6] ^ `TOP.cpu.sii_l2t7_req[7] ^ `TOP.cpu.sii_l2t7_req[8] ^ `TOP.cpu.sii_l2t7_req[9] ^ `TOP.cpu.sii_l2t7_req[10] ^ `TOP.cpu.sii_l2t7_req[18] ^ `TOP.cpu.sii_l2t7_req[19] ^ `TOP.cpu.sii_l2t7_req[20] ^ `TOP.cpu.sii_l2t7_req[21] ^ `TOP.cpu.sii_l2t7_req[22] ^ `TOP.cpu.sii_l2t7_req[23] ^ `TOP.cpu.sii_l2t7_req[24] ^ `TOP.cpu.sii_l2t7_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t7_req_vld,8))) && ($0in_delay(sii_l2t7_req[24] == 0,8)) && ($0in_delay(sii_l2t7_req[25] == 0,8)) && ($0in_delay(sii_l2t7_req[26] == 1,8)) && ($0in_rising_edge($0in_delay(l2t7_sii_iq_dequeue,8))) && !(sii_wri_ecc3_l7_cycle7 == sii_l2b7_ecc[3]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc3_l7_wri_cycle7
*/

wire sii_wri_ecc4_l7_cycle7 =  ( `TOP.cpu.sii_l2t7_req[11] ^ `TOP.cpu.sii_l2t7_req[12] ^ `TOP.cpu.sii_l2t7_req[13] ^ `TOP.cpu.sii_l2t7_req[14] ^ `TOP.cpu.sii_l2t7_req[15] ^ `TOP.cpu.sii_l2t7_req[16] ^ `TOP.cpu.sii_l2t7_req[17] ^ `TOP.cpu.sii_l2t7_req[18] ^ `TOP.cpu.sii_l2t7_req[19] ^ `TOP.cpu.sii_l2t7_req[20] ^ `TOP.cpu.sii_l2t7_req[21] ^ `TOP.cpu.sii_l2t7_req[22] ^ `TOP.cpu.sii_l2t7_req[23] ^ `TOP.cpu.sii_l2t7_req[24] ^ `TOP.cpu.sii_l2t7_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t7_req_vld,8))) && ($0in_delay(sii_l2t7_req[24] == 0,8)) && ($0in_delay(sii_l2t7_req[25] == 0,8)) && ($0in_delay(sii_l2t7_req[26] == 1,8)) && ($0in_rising_edge($0in_delay(l2t7_sii_iq_dequeue,8))) && !(sii_wri_ecc4_l7_cycle7 == sii_l2b7_ecc[4]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc4_l7_wri_cycle7
*/

wire sii_wri_ecc5_l7_cycle7 =  (`TOP.cpu.sii_l2t7_req[26] ^ `TOP.cpu.sii_l2t7_req[27] ^ `TOP.cpu.sii_l2t7_req[28] ^ `TOP.cpu.sii_l2t7_req[29] ^ `TOP.cpu.sii_l2t7_req[30] ^ `TOP.cpu.sii_l2t7_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t7_req_vld,8))) && ($0in_delay(sii_l2t7_req[24] == 0,8)) && ($0in_delay(sii_l2t7_req[25] == 0,8)) && ($0in_delay(sii_l2t7_req[26] == 1,8)) && ($0in_rising_edge($0in_delay(l2t7_sii_iq_dequeue,8))) && !(sii_wri_ecc5_l7_cycle7 == sii_l2b7_ecc[5]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc5_l7_wri_cycle7
*/

wire sii_wri_ecc6_l7_cycle7 =  (`TOP.cpu.sii_l2t7_req[0] ^ `TOP.cpu.sii_l2t7_req[1] ^ `TOP.cpu.sii_l2t7_req[2] ^ `TOP.cpu.sii_l2t7_req[4] ^ `TOP.cpu.sii_l2t7_req[5] ^ `TOP.cpu.sii_l2t7_req[7] ^ `TOP.cpu.sii_l2t7_req[10] ^ `TOP.cpu.sii_l2t7_req[11] ^ `TOP.cpu.sii_l2t7_req[12] ^ `TOP.cpu.sii_l2t7_req[14] ^ `TOP.cpu.sii_l2t7_req[17] ^ `TOP.cpu.sii_l2t7_req[18] ^ `TOP.cpu.sii_l2t7_req[21] ^ `TOP.cpu.sii_l2t7_req[23] ^ `TOP.cpu.sii_l2t7_req[24] ^ `TOP.cpu.sii_l2t7_req[26] ^ `TOP.cpu.sii_l2t7_req[27] ^ `TOP.cpu.sii_l2t7_req[29] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t7_req_vld,8))) && ($0in_delay(sii_l2t7_req[24] == 0,8)) && ($0in_delay(sii_l2t7_req[25] == 0,8)) && ($0in_delay(sii_l2t7_req[26] == 1,8)) && ($0in_rising_edge($0in_delay(l2t7_sii_iq_dequeue,8))) && !(sii_wri_ecc6_l7_cycle7 == sii_l2b7_ecc[6]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc6_l7_wri_cycle7
*/

wire sii_wri_ecc0_l7_cycle8 =  (`TOP.cpu.sii_l2t7_req[0] ^ `TOP.cpu.sii_l2t7_req[1] ^ `TOP.cpu.sii_l2t7_req[3] ^ `TOP.cpu.sii_l2t7_req[4] ^ `TOP.cpu.sii_l2t7_req[6] ^ `TOP.cpu.sii_l2t7_req[8] ^ `TOP.cpu.sii_l2t7_req[10] ^ `TOP.cpu.sii_l2t7_req[11] ^ `TOP.cpu.sii_l2t7_req[13] ^ `TOP.cpu.sii_l2t7_req[15] ^ `TOP.cpu.sii_l2t7_req[17] ^ `TOP.cpu.sii_l2t7_req[19] ^ `TOP.cpu.sii_l2t7_req[21] ^ `TOP.cpu.sii_l2t7_req[23] ^ `TOP.cpu.sii_l2t7_req[25] ^ `TOP.cpu.sii_l2t7_req[26] ^ `TOP.cpu.sii_l2t7_req[28] ^ `TOP.cpu.sii_l2t7_req[30] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t7_req_vld,9))) && ($0in_delay(sii_l2t7_req[24] == 0,9)) && ($0in_delay(sii_l2t7_req[25] == 0,9)) && ($0in_delay(sii_l2t7_req[26] == 1,9)) && ($0in_rising_edge($0in_delay(l2t7_sii_iq_dequeue,9))) && !(sii_wri_ecc0_l7_cycle8 == sii_l2b7_ecc[0]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc0_l7_wri_cycle8
*/

wire sii_wri_ecc1_l7_cycle8 =  (`TOP.cpu.sii_l2t7_req[0] ^ `TOP.cpu.sii_l2t7_req[2] ^ `TOP.cpu.sii_l2t7_req[3] ^ `TOP.cpu.sii_l2t7_req[5] ^ `TOP.cpu.sii_l2t7_req[6] ^ `TOP.cpu.sii_l2t7_req[9] ^ `TOP.cpu.sii_l2t7_req[10] ^ `TOP.cpu.sii_l2t7_req[12] ^ `TOP.cpu.sii_l2t7_req[13] ^ `TOP.cpu.sii_l2t7_req[16] ^ `TOP.cpu.sii_l2t7_req[17] ^ `TOP.cpu.sii_l2t7_req[20] ^ `TOP.cpu.sii_l2t7_req[21] ^ `TOP.cpu.sii_l2t7_req[24] ^ `TOP.cpu.sii_l2t7_req[25] ^ `TOP.cpu.sii_l2t7_req[27] ^ `TOP.cpu.sii_l2t7_req[28] ^ `TOP.cpu.sii_l2t7_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t7_req_vld,9))) && ($0in_delay(sii_l2t7_req[24] == 0,9)) && ($0in_delay(sii_l2t7_req[25] == 0,9)) && ($0in_delay(sii_l2t7_req[26] == 1,9)) && ($0in_rising_edge($0in_delay(l2t7_sii_iq_dequeue,9))) && !(sii_wri_ecc1_l7_cycle8 == sii_l2b7_ecc[1]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc1_l7_wri_cycle8
*/

wire sii_wri_ecc2_l7_cycle8 =  (`TOP.cpu.sii_l2t7_req[1] ^ `TOP.cpu.sii_l2t7_req[2] ^ `TOP.cpu.sii_l2t7_req[3] ^ `TOP.cpu.sii_l2t7_req[7] ^ `TOP.cpu.sii_l2t7_req[8] ^ `TOP.cpu.sii_l2t7_req[9] ^ `TOP.cpu.sii_l2t7_req[10] ^ `TOP.cpu.sii_l2t7_req[14] ^ `TOP.cpu.sii_l2t7_req[15] ^ `TOP.cpu.sii_l2t7_req[16] ^ `TOP.cpu.sii_l2t7_req[17] ^ `TOP.cpu.sii_l2t7_req[22] ^ `TOP.cpu.sii_l2t7_req[23] ^ `TOP.cpu.sii_l2t7_req[24] ^ `TOP.cpu.sii_l2t7_req[25] ^ `TOP.cpu.sii_l2t7_req[29] ^ `TOP.cpu.sii_l2t7_req[30] ^ `TOP.cpu.sii_l2t7_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t7_req_vld,9))) && ($0in_delay(sii_l2t7_req[24] == 0,9)) && ($0in_delay(sii_l2t7_req[25] == 0,9)) && ($0in_delay(sii_l2t7_req[26] == 1,9)) && ($0in_rising_edge($0in_delay(l2t7_sii_iq_dequeue,9))) && !(sii_wri_ecc2_l7_cycle8 == sii_l2b7_ecc[2]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc2_l7_wri_cycle8
*/

wire sii_wri_ecc3_l7_cycle8 =  (`TOP.cpu.sii_l2t7_req[4] ^ `TOP.cpu.sii_l2t7_req[5] ^ `TOP.cpu.sii_l2t7_req[6] ^ `TOP.cpu.sii_l2t7_req[7] ^ `TOP.cpu.sii_l2t7_req[8] ^ `TOP.cpu.sii_l2t7_req[9] ^ `TOP.cpu.sii_l2t7_req[10] ^ `TOP.cpu.sii_l2t7_req[18] ^ `TOP.cpu.sii_l2t7_req[19] ^ `TOP.cpu.sii_l2t7_req[20] ^ `TOP.cpu.sii_l2t7_req[21] ^ `TOP.cpu.sii_l2t7_req[22] ^ `TOP.cpu.sii_l2t7_req[23] ^ `TOP.cpu.sii_l2t7_req[24] ^ `TOP.cpu.sii_l2t7_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t7_req_vld,9))) && ($0in_delay(sii_l2t7_req[24] == 0,9)) && ($0in_delay(sii_l2t7_req[25] == 0,9)) && ($0in_delay(sii_l2t7_req[26] == 1,9)) && ($0in_rising_edge($0in_delay(l2t7_sii_iq_dequeue,9))) && !(sii_wri_ecc3_l7_cycle8 == sii_l2b7_ecc[3]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc3_l7_wri_cycle8
*/

wire sii_wri_ecc4_l7_cycle8 =  ( `TOP.cpu.sii_l2t7_req[11] ^ `TOP.cpu.sii_l2t7_req[12] ^ `TOP.cpu.sii_l2t7_req[13] ^ `TOP.cpu.sii_l2t7_req[14] ^ `TOP.cpu.sii_l2t7_req[15] ^ `TOP.cpu.sii_l2t7_req[16] ^ `TOP.cpu.sii_l2t7_req[17] ^ `TOP.cpu.sii_l2t7_req[18] ^ `TOP.cpu.sii_l2t7_req[19] ^ `TOP.cpu.sii_l2t7_req[20] ^ `TOP.cpu.sii_l2t7_req[21] ^ `TOP.cpu.sii_l2t7_req[22] ^ `TOP.cpu.sii_l2t7_req[23] ^ `TOP.cpu.sii_l2t7_req[24] ^ `TOP.cpu.sii_l2t7_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t7_req_vld,9))) && ($0in_delay(sii_l2t7_req[24] == 0,9)) && ($0in_delay(sii_l2t7_req[25] == 0,9)) && ($0in_delay(sii_l2t7_req[26] == 1,9)) && ($0in_rising_edge($0in_delay(l2t7_sii_iq_dequeue,9))) && !(sii_wri_ecc4_l7_cycle8 == sii_l2b7_ecc[4]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc4_l7_wri_cycle8
*/

wire sii_wri_ecc5_l7_cycle8 =  (`TOP.cpu.sii_l2t7_req[26] ^ `TOP.cpu.sii_l2t7_req[27] ^ `TOP.cpu.sii_l2t7_req[28] ^ `TOP.cpu.sii_l2t7_req[29] ^ `TOP.cpu.sii_l2t7_req[30] ^ `TOP.cpu.sii_l2t7_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t7_req_vld,9))) && ($0in_delay(sii_l2t7_req[24] == 0,9)) && ($0in_delay(sii_l2t7_req[25] == 0,9)) && ($0in_delay(sii_l2t7_req[26] == 1,9)) && ($0in_rising_edge($0in_delay(l2t7_sii_iq_dequeue,9))) && !(sii_wri_ecc5_l7_cycle8 == sii_l2b7_ecc[5]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc5_l7_wri_cycle8
*/

wire sii_wri_ecc6_l7_cycle8 =  (`TOP.cpu.sii_l2t7_req[0] ^ `TOP.cpu.sii_l2t7_req[1] ^ `TOP.cpu.sii_l2t7_req[2] ^ `TOP.cpu.sii_l2t7_req[4] ^ `TOP.cpu.sii_l2t7_req[5] ^ `TOP.cpu.sii_l2t7_req[7] ^ `TOP.cpu.sii_l2t7_req[10] ^ `TOP.cpu.sii_l2t7_req[11] ^ `TOP.cpu.sii_l2t7_req[12] ^ `TOP.cpu.sii_l2t7_req[14] ^ `TOP.cpu.sii_l2t7_req[17] ^ `TOP.cpu.sii_l2t7_req[18] ^ `TOP.cpu.sii_l2t7_req[21] ^ `TOP.cpu.sii_l2t7_req[23] ^ `TOP.cpu.sii_l2t7_req[24] ^ `TOP.cpu.sii_l2t7_req[26] ^ `TOP.cpu.sii_l2t7_req[27] ^ `TOP.cpu.sii_l2t7_req[29] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t7_req_vld,9))) && ($0in_delay(sii_l2t7_req[24] == 0,9)) && ($0in_delay(sii_l2t7_req[25] == 0,9)) && ($0in_delay(sii_l2t7_req[26] == 1,9)) && ($0in_rising_edge($0in_delay(l2t7_sii_iq_dequeue,9))) && !(sii_wri_ecc6_l7_cycle8 == sii_l2b7_ecc[6]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc6_l7_wri_cycle8
*/

wire sii_wri_ecc0_l7_cycle9 =  (`TOP.cpu.sii_l2t7_req[0] ^ `TOP.cpu.sii_l2t7_req[1] ^ `TOP.cpu.sii_l2t7_req[3] ^ `TOP.cpu.sii_l2t7_req[4] ^ `TOP.cpu.sii_l2t7_req[6] ^ `TOP.cpu.sii_l2t7_req[8] ^ `TOP.cpu.sii_l2t7_req[10] ^ `TOP.cpu.sii_l2t7_req[11] ^ `TOP.cpu.sii_l2t7_req[13] ^ `TOP.cpu.sii_l2t7_req[15] ^ `TOP.cpu.sii_l2t7_req[17] ^ `TOP.cpu.sii_l2t7_req[19] ^ `TOP.cpu.sii_l2t7_req[21] ^ `TOP.cpu.sii_l2t7_req[23] ^ `TOP.cpu.sii_l2t7_req[25] ^ `TOP.cpu.sii_l2t7_req[26] ^ `TOP.cpu.sii_l2t7_req[28] ^ `TOP.cpu.sii_l2t7_req[30] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t7_req_vld,10))) && ($0in_delay(sii_l2t7_req[24] == 0,10)) && ($0in_delay(sii_l2t7_req[25] == 0,10)) && ($0in_delay(sii_l2t7_req[26] == 1,10)) && ($0in_rising_edge($0in_delay(l2t7_sii_iq_dequeue,10))) && !(sii_wri_ecc0_l7_cycle9 == sii_l2b7_ecc[0]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc0_l7_wri_cycle9
*/

wire sii_wri_ecc1_l7_cycle9 =  (`TOP.cpu.sii_l2t7_req[0] ^ `TOP.cpu.sii_l2t7_req[2] ^ `TOP.cpu.sii_l2t7_req[3] ^ `TOP.cpu.sii_l2t7_req[5] ^ `TOP.cpu.sii_l2t7_req[6] ^ `TOP.cpu.sii_l2t7_req[9] ^ `TOP.cpu.sii_l2t7_req[10] ^ `TOP.cpu.sii_l2t7_req[12] ^ `TOP.cpu.sii_l2t7_req[13] ^ `TOP.cpu.sii_l2t7_req[16] ^ `TOP.cpu.sii_l2t7_req[17] ^ `TOP.cpu.sii_l2t7_req[20] ^ `TOP.cpu.sii_l2t7_req[21] ^ `TOP.cpu.sii_l2t7_req[24] ^ `TOP.cpu.sii_l2t7_req[25] ^ `TOP.cpu.sii_l2t7_req[27] ^ `TOP.cpu.sii_l2t7_req[28] ^ `TOP.cpu.sii_l2t7_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t7_req_vld,10))) && ($0in_delay(sii_l2t7_req[24] == 0,10)) && ($0in_delay(sii_l2t7_req[25] == 0,10)) && ($0in_delay(sii_l2t7_req[26] == 1,10)) && ($0in_rising_edge($0in_delay(l2t7_sii_iq_dequeue,10))) && !(sii_wri_ecc1_l7_cycle9 == sii_l2b7_ecc[1]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc1_l7_wri_cycle9
*/

wire sii_wri_ecc2_l7_cycle9 =  (`TOP.cpu.sii_l2t7_req[1] ^ `TOP.cpu.sii_l2t7_req[2] ^ `TOP.cpu.sii_l2t7_req[3] ^ `TOP.cpu.sii_l2t7_req[7] ^ `TOP.cpu.sii_l2t7_req[8] ^ `TOP.cpu.sii_l2t7_req[9] ^ `TOP.cpu.sii_l2t7_req[10] ^ `TOP.cpu.sii_l2t7_req[14] ^ `TOP.cpu.sii_l2t7_req[15] ^ `TOP.cpu.sii_l2t7_req[16] ^ `TOP.cpu.sii_l2t7_req[17] ^ `TOP.cpu.sii_l2t7_req[22] ^ `TOP.cpu.sii_l2t7_req[23] ^ `TOP.cpu.sii_l2t7_req[24] ^ `TOP.cpu.sii_l2t7_req[25] ^ `TOP.cpu.sii_l2t7_req[29] ^ `TOP.cpu.sii_l2t7_req[30] ^ `TOP.cpu.sii_l2t7_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t7_req_vld,10))) && ($0in_delay(sii_l2t7_req[24] == 0,10)) && ($0in_delay(sii_l2t7_req[25] == 0,10)) && ($0in_delay(sii_l2t7_req[26] == 1,10)) && ($0in_rising_edge($0in_delay(l2t7_sii_iq_dequeue,10))) && !(sii_wri_ecc2_l7_cycle9 == sii_l2b7_ecc[2]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc2_l7_wri_cycle9
*/

wire sii_wri_ecc3_l7_cycle9 =  (`TOP.cpu.sii_l2t7_req[4] ^ `TOP.cpu.sii_l2t7_req[5] ^ `TOP.cpu.sii_l2t7_req[6] ^ `TOP.cpu.sii_l2t7_req[7] ^ `TOP.cpu.sii_l2t7_req[8] ^ `TOP.cpu.sii_l2t7_req[9] ^ `TOP.cpu.sii_l2t7_req[10] ^ `TOP.cpu.sii_l2t7_req[18] ^ `TOP.cpu.sii_l2t7_req[19] ^ `TOP.cpu.sii_l2t7_req[20] ^ `TOP.cpu.sii_l2t7_req[21] ^ `TOP.cpu.sii_l2t7_req[22] ^ `TOP.cpu.sii_l2t7_req[23] ^ `TOP.cpu.sii_l2t7_req[24] ^ `TOP.cpu.sii_l2t7_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t7_req_vld,10))) && ($0in_delay(sii_l2t7_req[24] == 0,10)) && ($0in_delay(sii_l2t7_req[25] == 0,10)) && ($0in_delay(sii_l2t7_req[26] == 1,10)) && ($0in_rising_edge($0in_delay(l2t7_sii_iq_dequeue,10))) && !(sii_wri_ecc3_l7_cycle9 == sii_l2b7_ecc[3]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc3_l7_wri_cycle9
*/

wire sii_wri_ecc4_l7_cycle9 =  ( `TOP.cpu.sii_l2t7_req[11] ^ `TOP.cpu.sii_l2t7_req[12] ^ `TOP.cpu.sii_l2t7_req[13] ^ `TOP.cpu.sii_l2t7_req[14] ^ `TOP.cpu.sii_l2t7_req[15] ^ `TOP.cpu.sii_l2t7_req[16] ^ `TOP.cpu.sii_l2t7_req[17] ^ `TOP.cpu.sii_l2t7_req[18] ^ `TOP.cpu.sii_l2t7_req[19] ^ `TOP.cpu.sii_l2t7_req[20] ^ `TOP.cpu.sii_l2t7_req[21] ^ `TOP.cpu.sii_l2t7_req[22] ^ `TOP.cpu.sii_l2t7_req[23] ^ `TOP.cpu.sii_l2t7_req[24] ^ `TOP.cpu.sii_l2t7_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t7_req_vld,10))) && ($0in_delay(sii_l2t7_req[24] == 0,10)) && ($0in_delay(sii_l2t7_req[25] == 0,10)) && ($0in_delay(sii_l2t7_req[26] == 1,10)) && ($0in_rising_edge($0in_delay(l2t7_sii_iq_dequeue,10))) && !(sii_wri_ecc4_l7_cycle9 == sii_l2b7_ecc[4]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc4_l7_wri_cycle9
*/

wire sii_wri_ecc5_l7_cycle9 =  (`TOP.cpu.sii_l2t7_req[26] ^ `TOP.cpu.sii_l2t7_req[27] ^ `TOP.cpu.sii_l2t7_req[28] ^ `TOP.cpu.sii_l2t7_req[29] ^ `TOP.cpu.sii_l2t7_req[30] ^ `TOP.cpu.sii_l2t7_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t7_req_vld,10))) && ($0in_delay(sii_l2t7_req[24] == 0,10)) && ($0in_delay(sii_l2t7_req[25] == 0,10)) && ($0in_delay(sii_l2t7_req[26] == 1,10)) && ($0in_rising_edge($0in_delay(l2t7_sii_iq_dequeue,10))) && !(sii_wri_ecc5_l7_cycle9 == sii_l2b7_ecc[5]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc5_l7_wri_cycle9
*/

wire sii_wri_ecc6_l7_cycle9 =  (`TOP.cpu.sii_l2t7_req[0] ^ `TOP.cpu.sii_l2t7_req[1] ^ `TOP.cpu.sii_l2t7_req[2] ^ `TOP.cpu.sii_l2t7_req[4] ^ `TOP.cpu.sii_l2t7_req[5] ^ `TOP.cpu.sii_l2t7_req[7] ^ `TOP.cpu.sii_l2t7_req[10] ^ `TOP.cpu.sii_l2t7_req[11] ^ `TOP.cpu.sii_l2t7_req[12] ^ `TOP.cpu.sii_l2t7_req[14] ^ `TOP.cpu.sii_l2t7_req[17] ^ `TOP.cpu.sii_l2t7_req[18] ^ `TOP.cpu.sii_l2t7_req[21] ^ `TOP.cpu.sii_l2t7_req[23] ^ `TOP.cpu.sii_l2t7_req[24] ^ `TOP.cpu.sii_l2t7_req[26] ^ `TOP.cpu.sii_l2t7_req[27] ^ `TOP.cpu.sii_l2t7_req[29] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t7_req_vld,10))) && ($0in_delay(sii_l2t7_req[24] == 0,10)) && ($0in_delay(sii_l2t7_req[25] == 0,10)) && ($0in_delay(sii_l2t7_req[26] == 1,10)) && ($0in_rising_edge($0in_delay(l2t7_sii_iq_dequeue,10))) && !(sii_wri_ecc6_l7_cycle9 == sii_l2b7_ecc[6]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc6_l7_wri_cycle9
*/

wire sii_wri_ecc0_l7_cycle10 =  (`TOP.cpu.sii_l2t7_req[0] ^ `TOP.cpu.sii_l2t7_req[1] ^ `TOP.cpu.sii_l2t7_req[3] ^ `TOP.cpu.sii_l2t7_req[4] ^ `TOP.cpu.sii_l2t7_req[6] ^ `TOP.cpu.sii_l2t7_req[8] ^ `TOP.cpu.sii_l2t7_req[10] ^ `TOP.cpu.sii_l2t7_req[11] ^ `TOP.cpu.sii_l2t7_req[13] ^ `TOP.cpu.sii_l2t7_req[15] ^ `TOP.cpu.sii_l2t7_req[17] ^ `TOP.cpu.sii_l2t7_req[19] ^ `TOP.cpu.sii_l2t7_req[21] ^ `TOP.cpu.sii_l2t7_req[23] ^ `TOP.cpu.sii_l2t7_req[25] ^ `TOP.cpu.sii_l2t7_req[26] ^ `TOP.cpu.sii_l2t7_req[28] ^ `TOP.cpu.sii_l2t7_req[30] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t7_req_vld,11))) && ($0in_delay(sii_l2t7_req[24] == 0,11)) && ($0in_delay(sii_l2t7_req[25] == 0,11)) && ($0in_delay(sii_l2t7_req[26] == 1,11)) && ($0in_rising_edge($0in_delay(l2t7_sii_iq_dequeue,11))) && !(sii_wri_ecc0_l7_cycle10 == sii_l2b7_ecc[0]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc0_l7_wri_cycle10
*/

wire sii_wri_ecc1_l7_cycle10 =  (`TOP.cpu.sii_l2t7_req[0] ^ `TOP.cpu.sii_l2t7_req[2] ^ `TOP.cpu.sii_l2t7_req[3] ^ `TOP.cpu.sii_l2t7_req[5] ^ `TOP.cpu.sii_l2t7_req[6] ^ `TOP.cpu.sii_l2t7_req[9] ^ `TOP.cpu.sii_l2t7_req[10] ^ `TOP.cpu.sii_l2t7_req[12] ^ `TOP.cpu.sii_l2t7_req[13] ^ `TOP.cpu.sii_l2t7_req[16] ^ `TOP.cpu.sii_l2t7_req[17] ^ `TOP.cpu.sii_l2t7_req[20] ^ `TOP.cpu.sii_l2t7_req[21] ^ `TOP.cpu.sii_l2t7_req[24] ^ `TOP.cpu.sii_l2t7_req[25] ^ `TOP.cpu.sii_l2t7_req[27] ^ `TOP.cpu.sii_l2t7_req[28] ^ `TOP.cpu.sii_l2t7_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t7_req_vld,11))) && ($0in_delay(sii_l2t7_req[24] == 0,11)) && ($0in_delay(sii_l2t7_req[25] == 0,11)) && ($0in_delay(sii_l2t7_req[26] == 1,11)) && ($0in_rising_edge($0in_delay(l2t7_sii_iq_dequeue,11))) && !(sii_wri_ecc1_l7_cycle10 == sii_l2b7_ecc[1]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc1_l7_wri_cycle10
*/

wire sii_wri_ecc2_l7_cycle10 =  (`TOP.cpu.sii_l2t7_req[1] ^ `TOP.cpu.sii_l2t7_req[2] ^ `TOP.cpu.sii_l2t7_req[3] ^ `TOP.cpu.sii_l2t7_req[7] ^ `TOP.cpu.sii_l2t7_req[8] ^ `TOP.cpu.sii_l2t7_req[9] ^ `TOP.cpu.sii_l2t7_req[10] ^ `TOP.cpu.sii_l2t7_req[14] ^ `TOP.cpu.sii_l2t7_req[15] ^ `TOP.cpu.sii_l2t7_req[16] ^ `TOP.cpu.sii_l2t7_req[17] ^ `TOP.cpu.sii_l2t7_req[22] ^ `TOP.cpu.sii_l2t7_req[23] ^ `TOP.cpu.sii_l2t7_req[24] ^ `TOP.cpu.sii_l2t7_req[25] ^ `TOP.cpu.sii_l2t7_req[29] ^ `TOP.cpu.sii_l2t7_req[30] ^ `TOP.cpu.sii_l2t7_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t7_req_vld,11))) && ($0in_delay(sii_l2t7_req[24] == 0,11)) && ($0in_delay(sii_l2t7_req[25] == 0,11)) && ($0in_delay(sii_l2t7_req[26] == 1,11)) && ($0in_rising_edge($0in_delay(l2t7_sii_iq_dequeue,11))) && !(sii_wri_ecc2_l7_cycle10 == sii_l2b7_ecc[2]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc2_l7_wri_cycle10
*/

wire sii_wri_ecc3_l7_cycle10 =  (`TOP.cpu.sii_l2t7_req[4] ^ `TOP.cpu.sii_l2t7_req[5] ^ `TOP.cpu.sii_l2t7_req[6] ^ `TOP.cpu.sii_l2t7_req[7] ^ `TOP.cpu.sii_l2t7_req[8] ^ `TOP.cpu.sii_l2t7_req[9] ^ `TOP.cpu.sii_l2t7_req[10] ^ `TOP.cpu.sii_l2t7_req[18] ^ `TOP.cpu.sii_l2t7_req[19] ^ `TOP.cpu.sii_l2t7_req[20] ^ `TOP.cpu.sii_l2t7_req[21] ^ `TOP.cpu.sii_l2t7_req[22] ^ `TOP.cpu.sii_l2t7_req[23] ^ `TOP.cpu.sii_l2t7_req[24] ^ `TOP.cpu.sii_l2t7_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t7_req_vld,11))) && ($0in_delay(sii_l2t7_req[24] == 0,11)) && ($0in_delay(sii_l2t7_req[25] == 0,11)) && ($0in_delay(sii_l2t7_req[26] == 1,11)) && ($0in_rising_edge($0in_delay(l2t7_sii_iq_dequeue,11))) && !(sii_wri_ecc3_l7_cycle10 == sii_l2b7_ecc[3]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc3_l7_wri_cycle10
*/

wire sii_wri_ecc4_l7_cycle10 =  ( `TOP.cpu.sii_l2t7_req[11] ^ `TOP.cpu.sii_l2t7_req[12] ^ `TOP.cpu.sii_l2t7_req[13] ^ `TOP.cpu.sii_l2t7_req[14] ^ `TOP.cpu.sii_l2t7_req[15] ^ `TOP.cpu.sii_l2t7_req[16] ^ `TOP.cpu.sii_l2t7_req[17] ^ `TOP.cpu.sii_l2t7_req[18] ^ `TOP.cpu.sii_l2t7_req[19] ^ `TOP.cpu.sii_l2t7_req[20] ^ `TOP.cpu.sii_l2t7_req[21] ^ `TOP.cpu.sii_l2t7_req[22] ^ `TOP.cpu.sii_l2t7_req[23] ^ `TOP.cpu.sii_l2t7_req[24] ^ `TOP.cpu.sii_l2t7_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t7_req_vld,11))) && ($0in_delay(sii_l2t7_req[24] == 0,11)) && ($0in_delay(sii_l2t7_req[25] == 0,11)) && ($0in_delay(sii_l2t7_req[26] == 1,11)) && ($0in_rising_edge($0in_delay(l2t7_sii_iq_dequeue,11))) && !(sii_wri_ecc4_l7_cycle10 == sii_l2b7_ecc[4]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc4_l7_wri_cycle10
*/

wire sii_wri_ecc5_l7_cycle10 =  (`TOP.cpu.sii_l2t7_req[26] ^ `TOP.cpu.sii_l2t7_req[27] ^ `TOP.cpu.sii_l2t7_req[28] ^ `TOP.cpu.sii_l2t7_req[29] ^ `TOP.cpu.sii_l2t7_req[30] ^ `TOP.cpu.sii_l2t7_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t7_req_vld,11))) && ($0in_delay(sii_l2t7_req[24] == 0,11)) && ($0in_delay(sii_l2t7_req[25] == 0,11)) && ($0in_delay(sii_l2t7_req[26] == 1,11)) && ($0in_rising_edge($0in_delay(l2t7_sii_iq_dequeue,11))) && !(sii_wri_ecc5_l7_cycle10 == sii_l2b7_ecc[5]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc5_l7_wri_cycle10
*/

wire sii_wri_ecc6_l7_cycle10 =  (`TOP.cpu.sii_l2t7_req[0] ^ `TOP.cpu.sii_l2t7_req[1] ^ `TOP.cpu.sii_l2t7_req[2] ^ `TOP.cpu.sii_l2t7_req[4] ^ `TOP.cpu.sii_l2t7_req[5] ^ `TOP.cpu.sii_l2t7_req[7] ^ `TOP.cpu.sii_l2t7_req[10] ^ `TOP.cpu.sii_l2t7_req[11] ^ `TOP.cpu.sii_l2t7_req[12] ^ `TOP.cpu.sii_l2t7_req[14] ^ `TOP.cpu.sii_l2t7_req[17] ^ `TOP.cpu.sii_l2t7_req[18] ^ `TOP.cpu.sii_l2t7_req[21] ^ `TOP.cpu.sii_l2t7_req[23] ^ `TOP.cpu.sii_l2t7_req[24] ^ `TOP.cpu.sii_l2t7_req[26] ^ `TOP.cpu.sii_l2t7_req[27] ^ `TOP.cpu.sii_l2t7_req[29] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t7_req_vld,11))) && ($0in_delay(sii_l2t7_req[24] == 0,11)) && ($0in_delay(sii_l2t7_req[25] == 0,11)) && ($0in_delay(sii_l2t7_req[26] == 1,11)) && ($0in_rising_edge($0in_delay(l2t7_sii_iq_dequeue,11))) && !(sii_wri_ecc6_l7_cycle10 == sii_l2b7_ecc[6]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc6_l7_wri_cycle10
*/

wire sii_wri_ecc0_l7_cycle11 =  (`TOP.cpu.sii_l2t7_req[0] ^ `TOP.cpu.sii_l2t7_req[1] ^ `TOP.cpu.sii_l2t7_req[3] ^ `TOP.cpu.sii_l2t7_req[4] ^ `TOP.cpu.sii_l2t7_req[6] ^ `TOP.cpu.sii_l2t7_req[8] ^ `TOP.cpu.sii_l2t7_req[10] ^ `TOP.cpu.sii_l2t7_req[11] ^ `TOP.cpu.sii_l2t7_req[13] ^ `TOP.cpu.sii_l2t7_req[15] ^ `TOP.cpu.sii_l2t7_req[17] ^ `TOP.cpu.sii_l2t7_req[19] ^ `TOP.cpu.sii_l2t7_req[21] ^ `TOP.cpu.sii_l2t7_req[23] ^ `TOP.cpu.sii_l2t7_req[25] ^ `TOP.cpu.sii_l2t7_req[26] ^ `TOP.cpu.sii_l2t7_req[28] ^ `TOP.cpu.sii_l2t7_req[30] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t7_req_vld,12))) && ($0in_delay(sii_l2t7_req[24] == 0,12)) && ($0in_delay(sii_l2t7_req[25] == 0,12)) && ($0in_delay(sii_l2t7_req[26] == 1,12)) && ($0in_rising_edge($0in_delay(l2t7_sii_iq_dequeue,12))) && !(sii_wri_ecc0_l7_cycle11 == sii_l2b7_ecc[0]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc0_l7_wri_cycle11
*/

wire sii_wri_ecc1_l7_cycle11 =  (`TOP.cpu.sii_l2t7_req[0] ^ `TOP.cpu.sii_l2t7_req[2] ^ `TOP.cpu.sii_l2t7_req[3] ^ `TOP.cpu.sii_l2t7_req[5] ^ `TOP.cpu.sii_l2t7_req[6] ^ `TOP.cpu.sii_l2t7_req[9] ^ `TOP.cpu.sii_l2t7_req[10] ^ `TOP.cpu.sii_l2t7_req[12] ^ `TOP.cpu.sii_l2t7_req[13] ^ `TOP.cpu.sii_l2t7_req[16] ^ `TOP.cpu.sii_l2t7_req[17] ^ `TOP.cpu.sii_l2t7_req[20] ^ `TOP.cpu.sii_l2t7_req[21] ^ `TOP.cpu.sii_l2t7_req[24] ^ `TOP.cpu.sii_l2t7_req[25] ^ `TOP.cpu.sii_l2t7_req[27] ^ `TOP.cpu.sii_l2t7_req[28] ^ `TOP.cpu.sii_l2t7_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t7_req_vld,12))) && ($0in_delay(sii_l2t7_req[24] == 0,12)) && ($0in_delay(sii_l2t7_req[25] == 0,12)) && ($0in_delay(sii_l2t7_req[26] == 1,12)) && ($0in_rising_edge($0in_delay(l2t7_sii_iq_dequeue,12))) && !(sii_wri_ecc1_l7_cycle11 == sii_l2b7_ecc[1]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc1_l7_wri_cycle11
*/

wire sii_wri_ecc2_l7_cycle11 =  (`TOP.cpu.sii_l2t7_req[1] ^ `TOP.cpu.sii_l2t7_req[2] ^ `TOP.cpu.sii_l2t7_req[3] ^ `TOP.cpu.sii_l2t7_req[7] ^ `TOP.cpu.sii_l2t7_req[8] ^ `TOP.cpu.sii_l2t7_req[9] ^ `TOP.cpu.sii_l2t7_req[10] ^ `TOP.cpu.sii_l2t7_req[14] ^ `TOP.cpu.sii_l2t7_req[15] ^ `TOP.cpu.sii_l2t7_req[16] ^ `TOP.cpu.sii_l2t7_req[17] ^ `TOP.cpu.sii_l2t7_req[22] ^ `TOP.cpu.sii_l2t7_req[23] ^ `TOP.cpu.sii_l2t7_req[24] ^ `TOP.cpu.sii_l2t7_req[25] ^ `TOP.cpu.sii_l2t7_req[29] ^ `TOP.cpu.sii_l2t7_req[30] ^ `TOP.cpu.sii_l2t7_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t7_req_vld,12))) && ($0in_delay(sii_l2t7_req[24] == 0,12)) && ($0in_delay(sii_l2t7_req[25] == 0,12)) && ($0in_delay(sii_l2t7_req[26] == 1,12)) && ($0in_rising_edge($0in_delay(l2t7_sii_iq_dequeue,12))) && !(sii_wri_ecc2_l7_cycle11 == sii_l2b7_ecc[2]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc2_l7_wri_cycle11
*/

wire sii_wri_ecc3_l7_cycle11 =  (`TOP.cpu.sii_l2t7_req[4] ^ `TOP.cpu.sii_l2t7_req[5] ^ `TOP.cpu.sii_l2t7_req[6] ^ `TOP.cpu.sii_l2t7_req[7] ^ `TOP.cpu.sii_l2t7_req[8] ^ `TOP.cpu.sii_l2t7_req[9] ^ `TOP.cpu.sii_l2t7_req[10] ^ `TOP.cpu.sii_l2t7_req[18] ^ `TOP.cpu.sii_l2t7_req[19] ^ `TOP.cpu.sii_l2t7_req[20] ^ `TOP.cpu.sii_l2t7_req[21] ^ `TOP.cpu.sii_l2t7_req[22] ^ `TOP.cpu.sii_l2t7_req[23] ^ `TOP.cpu.sii_l2t7_req[24] ^ `TOP.cpu.sii_l2t7_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t7_req_vld,12))) && ($0in_delay(sii_l2t7_req[24] == 0,12)) && ($0in_delay(sii_l2t7_req[25] == 0,12)) && ($0in_delay(sii_l2t7_req[26] == 1,12)) && ($0in_rising_edge($0in_delay(l2t7_sii_iq_dequeue,12))) && !(sii_wri_ecc3_l7_cycle11 == sii_l2b7_ecc[3]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc3_l7_wri_cycle11
*/

wire sii_wri_ecc4_l7_cycle11 =  ( `TOP.cpu.sii_l2t7_req[11] ^ `TOP.cpu.sii_l2t7_req[12] ^ `TOP.cpu.sii_l2t7_req[13] ^ `TOP.cpu.sii_l2t7_req[14] ^ `TOP.cpu.sii_l2t7_req[15] ^ `TOP.cpu.sii_l2t7_req[16] ^ `TOP.cpu.sii_l2t7_req[17] ^ `TOP.cpu.sii_l2t7_req[18] ^ `TOP.cpu.sii_l2t7_req[19] ^ `TOP.cpu.sii_l2t7_req[20] ^ `TOP.cpu.sii_l2t7_req[21] ^ `TOP.cpu.sii_l2t7_req[22] ^ `TOP.cpu.sii_l2t7_req[23] ^ `TOP.cpu.sii_l2t7_req[24] ^ `TOP.cpu.sii_l2t7_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t7_req_vld,12))) && ($0in_delay(sii_l2t7_req[24] == 0,12)) && ($0in_delay(sii_l2t7_req[25] == 0,12)) && ($0in_delay(sii_l2t7_req[26] == 1,12)) && ($0in_rising_edge($0in_delay(l2t7_sii_iq_dequeue,12))) && !(sii_wri_ecc4_l7_cycle11 == sii_l2b7_ecc[4]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc4_l7_wri_cycle11
*/

wire sii_wri_ecc5_l7_cycle11 =  (`TOP.cpu.sii_l2t7_req[26] ^ `TOP.cpu.sii_l2t7_req[27] ^ `TOP.cpu.sii_l2t7_req[28] ^ `TOP.cpu.sii_l2t7_req[29] ^ `TOP.cpu.sii_l2t7_req[30] ^ `TOP.cpu.sii_l2t7_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t7_req_vld,12))) && ($0in_delay(sii_l2t7_req[24] == 0,12)) && ($0in_delay(sii_l2t7_req[25] == 0,12)) && ($0in_delay(sii_l2t7_req[26] == 1,12)) && ($0in_rising_edge($0in_delay(l2t7_sii_iq_dequeue,12))) && !(sii_wri_ecc5_l7_cycle11 == sii_l2b7_ecc[5]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc5_l7_wri_cycle11
*/

wire sii_wri_ecc6_l7_cycle11 =  (`TOP.cpu.sii_l2t7_req[0] ^ `TOP.cpu.sii_l2t7_req[1] ^ `TOP.cpu.sii_l2t7_req[2] ^ `TOP.cpu.sii_l2t7_req[4] ^ `TOP.cpu.sii_l2t7_req[5] ^ `TOP.cpu.sii_l2t7_req[7] ^ `TOP.cpu.sii_l2t7_req[10] ^ `TOP.cpu.sii_l2t7_req[11] ^ `TOP.cpu.sii_l2t7_req[12] ^ `TOP.cpu.sii_l2t7_req[14] ^ `TOP.cpu.sii_l2t7_req[17] ^ `TOP.cpu.sii_l2t7_req[18] ^ `TOP.cpu.sii_l2t7_req[21] ^ `TOP.cpu.sii_l2t7_req[23] ^ `TOP.cpu.sii_l2t7_req[24] ^ `TOP.cpu.sii_l2t7_req[26] ^ `TOP.cpu.sii_l2t7_req[27] ^ `TOP.cpu.sii_l2t7_req[29] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t7_req_vld,12))) && ($0in_delay(sii_l2t7_req[24] == 0,12)) && ($0in_delay(sii_l2t7_req[25] == 0,12)) && ($0in_delay(sii_l2t7_req[26] == 1,12)) && ($0in_rising_edge($0in_delay(l2t7_sii_iq_dequeue,12))) && !(sii_wri_ecc6_l7_cycle11 == sii_l2b7_ecc[6]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc6_l7_wri_cycle11
*/

wire sii_wri_ecc0_l7_cycle12 =  (`TOP.cpu.sii_l2t7_req[0] ^ `TOP.cpu.sii_l2t7_req[1] ^ `TOP.cpu.sii_l2t7_req[3] ^ `TOP.cpu.sii_l2t7_req[4] ^ `TOP.cpu.sii_l2t7_req[6] ^ `TOP.cpu.sii_l2t7_req[8] ^ `TOP.cpu.sii_l2t7_req[10] ^ `TOP.cpu.sii_l2t7_req[11] ^ `TOP.cpu.sii_l2t7_req[13] ^ `TOP.cpu.sii_l2t7_req[15] ^ `TOP.cpu.sii_l2t7_req[17] ^ `TOP.cpu.sii_l2t7_req[19] ^ `TOP.cpu.sii_l2t7_req[21] ^ `TOP.cpu.sii_l2t7_req[23] ^ `TOP.cpu.sii_l2t7_req[25] ^ `TOP.cpu.sii_l2t7_req[26] ^ `TOP.cpu.sii_l2t7_req[28] ^ `TOP.cpu.sii_l2t7_req[30] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t7_req_vld,13))) && ($0in_delay(sii_l2t7_req[24] == 0,13)) && ($0in_delay(sii_l2t7_req[25] == 0,13)) && ($0in_delay(sii_l2t7_req[26] == 1,13)) && ($0in_rising_edge($0in_delay(l2t7_sii_iq_dequeue,13))) && !(sii_wri_ecc0_l7_cycle12 == sii_l2b7_ecc[0]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc0_l7_wri_cycle12
*/

wire sii_wri_ecc1_l7_cycle12 =  (`TOP.cpu.sii_l2t7_req[0] ^ `TOP.cpu.sii_l2t7_req[2] ^ `TOP.cpu.sii_l2t7_req[3] ^ `TOP.cpu.sii_l2t7_req[5] ^ `TOP.cpu.sii_l2t7_req[6] ^ `TOP.cpu.sii_l2t7_req[9] ^ `TOP.cpu.sii_l2t7_req[10] ^ `TOP.cpu.sii_l2t7_req[12] ^ `TOP.cpu.sii_l2t7_req[13] ^ `TOP.cpu.sii_l2t7_req[16] ^ `TOP.cpu.sii_l2t7_req[17] ^ `TOP.cpu.sii_l2t7_req[20] ^ `TOP.cpu.sii_l2t7_req[21] ^ `TOP.cpu.sii_l2t7_req[24] ^ `TOP.cpu.sii_l2t7_req[25] ^ `TOP.cpu.sii_l2t7_req[27] ^ `TOP.cpu.sii_l2t7_req[28] ^ `TOP.cpu.sii_l2t7_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t7_req_vld,13))) && ($0in_delay(sii_l2t7_req[24] == 0,13)) && ($0in_delay(sii_l2t7_req[25] == 0,13)) && ($0in_delay(sii_l2t7_req[26] == 1,13)) && ($0in_rising_edge($0in_delay(l2t7_sii_iq_dequeue,13))) && !(sii_wri_ecc1_l7_cycle12 == sii_l2b7_ecc[1]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc1_l7_wri_cycle12
*/

wire sii_wri_ecc2_l7_cycle12 =  (`TOP.cpu.sii_l2t7_req[1] ^ `TOP.cpu.sii_l2t7_req[2] ^ `TOP.cpu.sii_l2t7_req[3] ^ `TOP.cpu.sii_l2t7_req[7] ^ `TOP.cpu.sii_l2t7_req[8] ^ `TOP.cpu.sii_l2t7_req[9] ^ `TOP.cpu.sii_l2t7_req[10] ^ `TOP.cpu.sii_l2t7_req[14] ^ `TOP.cpu.sii_l2t7_req[15] ^ `TOP.cpu.sii_l2t7_req[16] ^ `TOP.cpu.sii_l2t7_req[17] ^ `TOP.cpu.sii_l2t7_req[22] ^ `TOP.cpu.sii_l2t7_req[23] ^ `TOP.cpu.sii_l2t7_req[24] ^ `TOP.cpu.sii_l2t7_req[25] ^ `TOP.cpu.sii_l2t7_req[29] ^ `TOP.cpu.sii_l2t7_req[30] ^ `TOP.cpu.sii_l2t7_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t7_req_vld,13))) && ($0in_delay(sii_l2t7_req[24] == 0,13)) && ($0in_delay(sii_l2t7_req[25] == 0,13)) && ($0in_delay(sii_l2t7_req[26] == 1,13)) && ($0in_rising_edge($0in_delay(l2t7_sii_iq_dequeue,13))) && !(sii_wri_ecc2_l7_cycle12 == sii_l2b7_ecc[2]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc2_l7_wri_cycle12
*/

wire sii_wri_ecc3_l7_cycle12 =  (`TOP.cpu.sii_l2t7_req[4] ^ `TOP.cpu.sii_l2t7_req[5] ^ `TOP.cpu.sii_l2t7_req[6] ^ `TOP.cpu.sii_l2t7_req[7] ^ `TOP.cpu.sii_l2t7_req[8] ^ `TOP.cpu.sii_l2t7_req[9] ^ `TOP.cpu.sii_l2t7_req[10] ^ `TOP.cpu.sii_l2t7_req[18] ^ `TOP.cpu.sii_l2t7_req[19] ^ `TOP.cpu.sii_l2t7_req[20] ^ `TOP.cpu.sii_l2t7_req[21] ^ `TOP.cpu.sii_l2t7_req[22] ^ `TOP.cpu.sii_l2t7_req[23] ^ `TOP.cpu.sii_l2t7_req[24] ^ `TOP.cpu.sii_l2t7_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t7_req_vld,13))) && ($0in_delay(sii_l2t7_req[24] == 0,13)) && ($0in_delay(sii_l2t7_req[25] == 0,13)) && ($0in_delay(sii_l2t7_req[26] == 1,13)) && ($0in_rising_edge($0in_delay(l2t7_sii_iq_dequeue,13))) && !(sii_wri_ecc3_l7_cycle12 == sii_l2b7_ecc[3]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc3_l7_wri_cycle12
*/

wire sii_wri_ecc4_l7_cycle12 =  ( `TOP.cpu.sii_l2t7_req[11] ^ `TOP.cpu.sii_l2t7_req[12] ^ `TOP.cpu.sii_l2t7_req[13] ^ `TOP.cpu.sii_l2t7_req[14] ^ `TOP.cpu.sii_l2t7_req[15] ^ `TOP.cpu.sii_l2t7_req[16] ^ `TOP.cpu.sii_l2t7_req[17] ^ `TOP.cpu.sii_l2t7_req[18] ^ `TOP.cpu.sii_l2t7_req[19] ^ `TOP.cpu.sii_l2t7_req[20] ^ `TOP.cpu.sii_l2t7_req[21] ^ `TOP.cpu.sii_l2t7_req[22] ^ `TOP.cpu.sii_l2t7_req[23] ^ `TOP.cpu.sii_l2t7_req[24] ^ `TOP.cpu.sii_l2t7_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t7_req_vld,13))) && ($0in_delay(sii_l2t7_req[24] == 0,13)) && ($0in_delay(sii_l2t7_req[25] == 0,13)) && ($0in_delay(sii_l2t7_req[26] == 1,13)) && ($0in_rising_edge($0in_delay(l2t7_sii_iq_dequeue,13))) && !(sii_wri_ecc4_l7_cycle12 == sii_l2b7_ecc[4]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc4_l7_wri_cycle12
*/

wire sii_wri_ecc5_l7_cycle12 =  (`TOP.cpu.sii_l2t7_req[26] ^ `TOP.cpu.sii_l2t7_req[27] ^ `TOP.cpu.sii_l2t7_req[28] ^ `TOP.cpu.sii_l2t7_req[29] ^ `TOP.cpu.sii_l2t7_req[30] ^ `TOP.cpu.sii_l2t7_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t7_req_vld,13))) && ($0in_delay(sii_l2t7_req[24] == 0,13)) && ($0in_delay(sii_l2t7_req[25] == 0,13)) && ($0in_delay(sii_l2t7_req[26] == 1,13)) && ($0in_rising_edge($0in_delay(l2t7_sii_iq_dequeue,13))) && !(sii_wri_ecc5_l7_cycle12 == sii_l2b7_ecc[5]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc5_l7_wri_cycle12
*/

wire sii_wri_ecc6_l7_cycle12 =  (`TOP.cpu.sii_l2t7_req[0] ^ `TOP.cpu.sii_l2t7_req[1] ^ `TOP.cpu.sii_l2t7_req[2] ^ `TOP.cpu.sii_l2t7_req[4] ^ `TOP.cpu.sii_l2t7_req[5] ^ `TOP.cpu.sii_l2t7_req[7] ^ `TOP.cpu.sii_l2t7_req[10] ^ `TOP.cpu.sii_l2t7_req[11] ^ `TOP.cpu.sii_l2t7_req[12] ^ `TOP.cpu.sii_l2t7_req[14] ^ `TOP.cpu.sii_l2t7_req[17] ^ `TOP.cpu.sii_l2t7_req[18] ^ `TOP.cpu.sii_l2t7_req[21] ^ `TOP.cpu.sii_l2t7_req[23] ^ `TOP.cpu.sii_l2t7_req[24] ^ `TOP.cpu.sii_l2t7_req[26] ^ `TOP.cpu.sii_l2t7_req[27] ^ `TOP.cpu.sii_l2t7_req[29] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t7_req_vld,13))) && ($0in_delay(sii_l2t7_req[24] == 0,13)) && ($0in_delay(sii_l2t7_req[25] == 0,13)) && ($0in_delay(sii_l2t7_req[26] == 1,13)) && ($0in_rising_edge($0in_delay(l2t7_sii_iq_dequeue,13))) && !(sii_wri_ecc6_l7_cycle12 == sii_l2b7_ecc[6]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc6_l7_wri_cycle12
*/

wire sii_wri_ecc0_l7_cycle13 =  (`TOP.cpu.sii_l2t7_req[0] ^ `TOP.cpu.sii_l2t7_req[1] ^ `TOP.cpu.sii_l2t7_req[3] ^ `TOP.cpu.sii_l2t7_req[4] ^ `TOP.cpu.sii_l2t7_req[6] ^ `TOP.cpu.sii_l2t7_req[8] ^ `TOP.cpu.sii_l2t7_req[10] ^ `TOP.cpu.sii_l2t7_req[11] ^ `TOP.cpu.sii_l2t7_req[13] ^ `TOP.cpu.sii_l2t7_req[15] ^ `TOP.cpu.sii_l2t7_req[17] ^ `TOP.cpu.sii_l2t7_req[19] ^ `TOP.cpu.sii_l2t7_req[21] ^ `TOP.cpu.sii_l2t7_req[23] ^ `TOP.cpu.sii_l2t7_req[25] ^ `TOP.cpu.sii_l2t7_req[26] ^ `TOP.cpu.sii_l2t7_req[28] ^ `TOP.cpu.sii_l2t7_req[30] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t7_req_vld,14))) && ($0in_delay(sii_l2t7_req[24] == 0,14)) && ($0in_delay(sii_l2t7_req[25] == 0,14)) && ($0in_delay(sii_l2t7_req[26] == 1,14)) && ($0in_rising_edge($0in_delay(l2t7_sii_iq_dequeue,14))) && !(sii_wri_ecc0_l7_cycle13 == sii_l2b7_ecc[0]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc0_l7_wri_cycle13
*/

wire sii_wri_ecc1_l7_cycle13 =  (`TOP.cpu.sii_l2t7_req[0] ^ `TOP.cpu.sii_l2t7_req[2] ^ `TOP.cpu.sii_l2t7_req[3] ^ `TOP.cpu.sii_l2t7_req[5] ^ `TOP.cpu.sii_l2t7_req[6] ^ `TOP.cpu.sii_l2t7_req[9] ^ `TOP.cpu.sii_l2t7_req[10] ^ `TOP.cpu.sii_l2t7_req[12] ^ `TOP.cpu.sii_l2t7_req[13] ^ `TOP.cpu.sii_l2t7_req[16] ^ `TOP.cpu.sii_l2t7_req[17] ^ `TOP.cpu.sii_l2t7_req[20] ^ `TOP.cpu.sii_l2t7_req[21] ^ `TOP.cpu.sii_l2t7_req[24] ^ `TOP.cpu.sii_l2t7_req[25] ^ `TOP.cpu.sii_l2t7_req[27] ^ `TOP.cpu.sii_l2t7_req[28] ^ `TOP.cpu.sii_l2t7_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t7_req_vld,14))) && ($0in_delay(sii_l2t7_req[24] == 0,14)) && ($0in_delay(sii_l2t7_req[25] == 0,14)) && ($0in_delay(sii_l2t7_req[26] == 1,14)) && ($0in_rising_edge($0in_delay(l2t7_sii_iq_dequeue,14))) && !(sii_wri_ecc1_l7_cycle13 == sii_l2b7_ecc[1]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc1_l7_wri_cycle13
*/

wire sii_wri_ecc2_l7_cycle13 =  (`TOP.cpu.sii_l2t7_req[1] ^ `TOP.cpu.sii_l2t7_req[2] ^ `TOP.cpu.sii_l2t7_req[3] ^ `TOP.cpu.sii_l2t7_req[7] ^ `TOP.cpu.sii_l2t7_req[8] ^ `TOP.cpu.sii_l2t7_req[9] ^ `TOP.cpu.sii_l2t7_req[10] ^ `TOP.cpu.sii_l2t7_req[14] ^ `TOP.cpu.sii_l2t7_req[15] ^ `TOP.cpu.sii_l2t7_req[16] ^ `TOP.cpu.sii_l2t7_req[17] ^ `TOP.cpu.sii_l2t7_req[22] ^ `TOP.cpu.sii_l2t7_req[23] ^ `TOP.cpu.sii_l2t7_req[24] ^ `TOP.cpu.sii_l2t7_req[25] ^ `TOP.cpu.sii_l2t7_req[29] ^ `TOP.cpu.sii_l2t7_req[30] ^ `TOP.cpu.sii_l2t7_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t7_req_vld,14))) && ($0in_delay(sii_l2t7_req[24] == 0,14)) && ($0in_delay(sii_l2t7_req[25] == 0,14)) && ($0in_delay(sii_l2t7_req[26] == 1,14)) && ($0in_rising_edge($0in_delay(l2t7_sii_iq_dequeue,14))) && !(sii_wri_ecc2_l7_cycle13 == sii_l2b7_ecc[2]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc2_l7_wri_cycle13
*/

wire sii_wri_ecc3_l7_cycle13 =  (`TOP.cpu.sii_l2t7_req[4] ^ `TOP.cpu.sii_l2t7_req[5] ^ `TOP.cpu.sii_l2t7_req[6] ^ `TOP.cpu.sii_l2t7_req[7] ^ `TOP.cpu.sii_l2t7_req[8] ^ `TOP.cpu.sii_l2t7_req[9] ^ `TOP.cpu.sii_l2t7_req[10] ^ `TOP.cpu.sii_l2t7_req[18] ^ `TOP.cpu.sii_l2t7_req[19] ^ `TOP.cpu.sii_l2t7_req[20] ^ `TOP.cpu.sii_l2t7_req[21] ^ `TOP.cpu.sii_l2t7_req[22] ^ `TOP.cpu.sii_l2t7_req[23] ^ `TOP.cpu.sii_l2t7_req[24] ^ `TOP.cpu.sii_l2t7_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t7_req_vld,14))) && ($0in_delay(sii_l2t7_req[24] == 0,14)) && ($0in_delay(sii_l2t7_req[25] == 0,14)) && ($0in_delay(sii_l2t7_req[26] == 1,14)) && ($0in_rising_edge($0in_delay(l2t7_sii_iq_dequeue,14))) && !(sii_wri_ecc3_l7_cycle13 == sii_l2b7_ecc[3]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc3_l7_wri_cycle13
*/

wire sii_wri_ecc4_l7_cycle13 =  ( `TOP.cpu.sii_l2t7_req[11] ^ `TOP.cpu.sii_l2t7_req[12] ^ `TOP.cpu.sii_l2t7_req[13] ^ `TOP.cpu.sii_l2t7_req[14] ^ `TOP.cpu.sii_l2t7_req[15] ^ `TOP.cpu.sii_l2t7_req[16] ^ `TOP.cpu.sii_l2t7_req[17] ^ `TOP.cpu.sii_l2t7_req[18] ^ `TOP.cpu.sii_l2t7_req[19] ^ `TOP.cpu.sii_l2t7_req[20] ^ `TOP.cpu.sii_l2t7_req[21] ^ `TOP.cpu.sii_l2t7_req[22] ^ `TOP.cpu.sii_l2t7_req[23] ^ `TOP.cpu.sii_l2t7_req[24] ^ `TOP.cpu.sii_l2t7_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t7_req_vld,14))) && ($0in_delay(sii_l2t7_req[24] == 0,14)) && ($0in_delay(sii_l2t7_req[25] == 0,14)) && ($0in_delay(sii_l2t7_req[26] == 1,14)) && ($0in_rising_edge($0in_delay(l2t7_sii_iq_dequeue,14))) && !(sii_wri_ecc4_l7_cycle13 == sii_l2b7_ecc[4]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc4_l7_wri_cycle13
*/

wire sii_wri_ecc5_l7_cycle13 =  (`TOP.cpu.sii_l2t7_req[26] ^ `TOP.cpu.sii_l2t7_req[27] ^ `TOP.cpu.sii_l2t7_req[28] ^ `TOP.cpu.sii_l2t7_req[29] ^ `TOP.cpu.sii_l2t7_req[30] ^ `TOP.cpu.sii_l2t7_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t7_req_vld,14))) && ($0in_delay(sii_l2t7_req[24] == 0,14)) && ($0in_delay(sii_l2t7_req[25] == 0,14)) && ($0in_delay(sii_l2t7_req[26] == 1,14)) && ($0in_rising_edge($0in_delay(l2t7_sii_iq_dequeue,14))) && !(sii_wri_ecc5_l7_cycle13 == sii_l2b7_ecc[5]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc5_l7_wri_cycle13
*/

wire sii_wri_ecc6_l7_cycle13 =  (`TOP.cpu.sii_l2t7_req[0] ^ `TOP.cpu.sii_l2t7_req[1] ^ `TOP.cpu.sii_l2t7_req[2] ^ `TOP.cpu.sii_l2t7_req[4] ^ `TOP.cpu.sii_l2t7_req[5] ^ `TOP.cpu.sii_l2t7_req[7] ^ `TOP.cpu.sii_l2t7_req[10] ^ `TOP.cpu.sii_l2t7_req[11] ^ `TOP.cpu.sii_l2t7_req[12] ^ `TOP.cpu.sii_l2t7_req[14] ^ `TOP.cpu.sii_l2t7_req[17] ^ `TOP.cpu.sii_l2t7_req[18] ^ `TOP.cpu.sii_l2t7_req[21] ^ `TOP.cpu.sii_l2t7_req[23] ^ `TOP.cpu.sii_l2t7_req[24] ^ `TOP.cpu.sii_l2t7_req[26] ^ `TOP.cpu.sii_l2t7_req[27] ^ `TOP.cpu.sii_l2t7_req[29] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t7_req_vld,14))) && ($0in_delay(sii_l2t7_req[24] == 0,14)) && ($0in_delay(sii_l2t7_req[25] == 0,14)) && ($0in_delay(sii_l2t7_req[26] == 1,14)) && ($0in_rising_edge($0in_delay(l2t7_sii_iq_dequeue,14))) && !(sii_wri_ecc6_l7_cycle13 == sii_l2b7_ecc[6]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc6_l7_wri_cycle13
*/

wire sii_wri_ecc0_l7_cycle14 =  (`TOP.cpu.sii_l2t7_req[0] ^ `TOP.cpu.sii_l2t7_req[1] ^ `TOP.cpu.sii_l2t7_req[3] ^ `TOP.cpu.sii_l2t7_req[4] ^ `TOP.cpu.sii_l2t7_req[6] ^ `TOP.cpu.sii_l2t7_req[8] ^ `TOP.cpu.sii_l2t7_req[10] ^ `TOP.cpu.sii_l2t7_req[11] ^ `TOP.cpu.sii_l2t7_req[13] ^ `TOP.cpu.sii_l2t7_req[15] ^ `TOP.cpu.sii_l2t7_req[17] ^ `TOP.cpu.sii_l2t7_req[19] ^ `TOP.cpu.sii_l2t7_req[21] ^ `TOP.cpu.sii_l2t7_req[23] ^ `TOP.cpu.sii_l2t7_req[25] ^ `TOP.cpu.sii_l2t7_req[26] ^ `TOP.cpu.sii_l2t7_req[28] ^ `TOP.cpu.sii_l2t7_req[30] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t7_req_vld,15))) && ($0in_delay(sii_l2t7_req[24] == 0,15)) && ($0in_delay(sii_l2t7_req[25] == 0,15)) && ($0in_delay(sii_l2t7_req[26] == 1,15)) && ($0in_rising_edge($0in_delay(l2t7_sii_iq_dequeue,15))) && !(sii_wri_ecc0_l7_cycle14 == sii_l2b7_ecc[0]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc0_l7_wri_cycle14
*/

wire sii_wri_ecc1_l7_cycle14 =  (`TOP.cpu.sii_l2t7_req[0] ^ `TOP.cpu.sii_l2t7_req[2] ^ `TOP.cpu.sii_l2t7_req[3] ^ `TOP.cpu.sii_l2t7_req[5] ^ `TOP.cpu.sii_l2t7_req[6] ^ `TOP.cpu.sii_l2t7_req[9] ^ `TOP.cpu.sii_l2t7_req[10] ^ `TOP.cpu.sii_l2t7_req[12] ^ `TOP.cpu.sii_l2t7_req[13] ^ `TOP.cpu.sii_l2t7_req[16] ^ `TOP.cpu.sii_l2t7_req[17] ^ `TOP.cpu.sii_l2t7_req[20] ^ `TOP.cpu.sii_l2t7_req[21] ^ `TOP.cpu.sii_l2t7_req[24] ^ `TOP.cpu.sii_l2t7_req[25] ^ `TOP.cpu.sii_l2t7_req[27] ^ `TOP.cpu.sii_l2t7_req[28] ^ `TOP.cpu.sii_l2t7_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t7_req_vld,15))) && ($0in_delay(sii_l2t7_req[24] == 0,15)) && ($0in_delay(sii_l2t7_req[25] == 0,15)) && ($0in_delay(sii_l2t7_req[26] == 1,15)) && ($0in_rising_edge($0in_delay(l2t7_sii_iq_dequeue,15))) && !(sii_wri_ecc1_l7_cycle14 == sii_l2b7_ecc[1]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc1_l7_wri_cycle14
*/

wire sii_wri_ecc2_l7_cycle14 =  (`TOP.cpu.sii_l2t7_req[1] ^ `TOP.cpu.sii_l2t7_req[2] ^ `TOP.cpu.sii_l2t7_req[3] ^ `TOP.cpu.sii_l2t7_req[7] ^ `TOP.cpu.sii_l2t7_req[8] ^ `TOP.cpu.sii_l2t7_req[9] ^ `TOP.cpu.sii_l2t7_req[10] ^ `TOP.cpu.sii_l2t7_req[14] ^ `TOP.cpu.sii_l2t7_req[15] ^ `TOP.cpu.sii_l2t7_req[16] ^ `TOP.cpu.sii_l2t7_req[17] ^ `TOP.cpu.sii_l2t7_req[22] ^ `TOP.cpu.sii_l2t7_req[23] ^ `TOP.cpu.sii_l2t7_req[24] ^ `TOP.cpu.sii_l2t7_req[25] ^ `TOP.cpu.sii_l2t7_req[29] ^ `TOP.cpu.sii_l2t7_req[30] ^ `TOP.cpu.sii_l2t7_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t7_req_vld,15))) && ($0in_delay(sii_l2t7_req[24] == 0,15)) && ($0in_delay(sii_l2t7_req[25] == 0,15)) && ($0in_delay(sii_l2t7_req[26] == 1,15)) && ($0in_rising_edge($0in_delay(l2t7_sii_iq_dequeue,15))) && !(sii_wri_ecc2_l7_cycle14 == sii_l2b7_ecc[2]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc2_l7_wri_cycle14
*/

wire sii_wri_ecc3_l7_cycle14 =  (`TOP.cpu.sii_l2t7_req[4] ^ `TOP.cpu.sii_l2t7_req[5] ^ `TOP.cpu.sii_l2t7_req[6] ^ `TOP.cpu.sii_l2t7_req[7] ^ `TOP.cpu.sii_l2t7_req[8] ^ `TOP.cpu.sii_l2t7_req[9] ^ `TOP.cpu.sii_l2t7_req[10] ^ `TOP.cpu.sii_l2t7_req[18] ^ `TOP.cpu.sii_l2t7_req[19] ^ `TOP.cpu.sii_l2t7_req[20] ^ `TOP.cpu.sii_l2t7_req[21] ^ `TOP.cpu.sii_l2t7_req[22] ^ `TOP.cpu.sii_l2t7_req[23] ^ `TOP.cpu.sii_l2t7_req[24] ^ `TOP.cpu.sii_l2t7_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t7_req_vld,15))) && ($0in_delay(sii_l2t7_req[24] == 0,15)) && ($0in_delay(sii_l2t7_req[25] == 0,15)) && ($0in_delay(sii_l2t7_req[26] == 1,15)) && ($0in_rising_edge($0in_delay(l2t7_sii_iq_dequeue,15))) && !(sii_wri_ecc3_l7_cycle14 == sii_l2b7_ecc[3]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc3_l7_wri_cycle14
*/

wire sii_wri_ecc4_l7_cycle14 =  ( `TOP.cpu.sii_l2t7_req[11] ^ `TOP.cpu.sii_l2t7_req[12] ^ `TOP.cpu.sii_l2t7_req[13] ^ `TOP.cpu.sii_l2t7_req[14] ^ `TOP.cpu.sii_l2t7_req[15] ^ `TOP.cpu.sii_l2t7_req[16] ^ `TOP.cpu.sii_l2t7_req[17] ^ `TOP.cpu.sii_l2t7_req[18] ^ `TOP.cpu.sii_l2t7_req[19] ^ `TOP.cpu.sii_l2t7_req[20] ^ `TOP.cpu.sii_l2t7_req[21] ^ `TOP.cpu.sii_l2t7_req[22] ^ `TOP.cpu.sii_l2t7_req[23] ^ `TOP.cpu.sii_l2t7_req[24] ^ `TOP.cpu.sii_l2t7_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t7_req_vld,15))) && ($0in_delay(sii_l2t7_req[24] == 0,15)) && ($0in_delay(sii_l2t7_req[25] == 0,15)) && ($0in_delay(sii_l2t7_req[26] == 1,15)) && ($0in_rising_edge($0in_delay(l2t7_sii_iq_dequeue,15))) && !(sii_wri_ecc4_l7_cycle14 == sii_l2b7_ecc[4]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc4_l7_wri_cycle14
*/

wire sii_wri_ecc5_l7_cycle14 =  (`TOP.cpu.sii_l2t7_req[26] ^ `TOP.cpu.sii_l2t7_req[27] ^ `TOP.cpu.sii_l2t7_req[28] ^ `TOP.cpu.sii_l2t7_req[29] ^ `TOP.cpu.sii_l2t7_req[30] ^ `TOP.cpu.sii_l2t7_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t7_req_vld,15))) && ($0in_delay(sii_l2t7_req[24] == 0,15)) && ($0in_delay(sii_l2t7_req[25] == 0,15)) && ($0in_delay(sii_l2t7_req[26] == 1,15)) && ($0in_rising_edge($0in_delay(l2t7_sii_iq_dequeue,15))) && !(sii_wri_ecc5_l7_cycle14 == sii_l2b7_ecc[5]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc5_l7_wri_cycle14
*/

wire sii_wri_ecc6_l7_cycle14 =  (`TOP.cpu.sii_l2t7_req[0] ^ `TOP.cpu.sii_l2t7_req[1] ^ `TOP.cpu.sii_l2t7_req[2] ^ `TOP.cpu.sii_l2t7_req[4] ^ `TOP.cpu.sii_l2t7_req[5] ^ `TOP.cpu.sii_l2t7_req[7] ^ `TOP.cpu.sii_l2t7_req[10] ^ `TOP.cpu.sii_l2t7_req[11] ^ `TOP.cpu.sii_l2t7_req[12] ^ `TOP.cpu.sii_l2t7_req[14] ^ `TOP.cpu.sii_l2t7_req[17] ^ `TOP.cpu.sii_l2t7_req[18] ^ `TOP.cpu.sii_l2t7_req[21] ^ `TOP.cpu.sii_l2t7_req[23] ^ `TOP.cpu.sii_l2t7_req[24] ^ `TOP.cpu.sii_l2t7_req[26] ^ `TOP.cpu.sii_l2t7_req[27] ^ `TOP.cpu.sii_l2t7_req[29] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t7_req_vld,15))) && ($0in_delay(sii_l2t7_req[24] == 0,15)) && ($0in_delay(sii_l2t7_req[25] == 0,15)) && ($0in_delay(sii_l2t7_req[26] == 1,15)) && ($0in_rising_edge($0in_delay(l2t7_sii_iq_dequeue,15))) && !(sii_wri_ecc6_l7_cycle14 == sii_l2b7_ecc[6]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc6_l7_wri_cycle14
*/

wire sii_wri_ecc0_l7_cycle15 =  (`TOP.cpu.sii_l2t7_req[0] ^ `TOP.cpu.sii_l2t7_req[1] ^ `TOP.cpu.sii_l2t7_req[3] ^ `TOP.cpu.sii_l2t7_req[4] ^ `TOP.cpu.sii_l2t7_req[6] ^ `TOP.cpu.sii_l2t7_req[8] ^ `TOP.cpu.sii_l2t7_req[10] ^ `TOP.cpu.sii_l2t7_req[11] ^ `TOP.cpu.sii_l2t7_req[13] ^ `TOP.cpu.sii_l2t7_req[15] ^ `TOP.cpu.sii_l2t7_req[17] ^ `TOP.cpu.sii_l2t7_req[19] ^ `TOP.cpu.sii_l2t7_req[21] ^ `TOP.cpu.sii_l2t7_req[23] ^ `TOP.cpu.sii_l2t7_req[25] ^ `TOP.cpu.sii_l2t7_req[26] ^ `TOP.cpu.sii_l2t7_req[28] ^ `TOP.cpu.sii_l2t7_req[30] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t7_req_vld,16))) && ($0in_delay(sii_l2t7_req[24] == 0,16)) && ($0in_delay(sii_l2t7_req[25] == 0,16)) && ($0in_delay(sii_l2t7_req[26] == 1,16)) && ($0in_rising_edge($0in_delay(l2t7_sii_iq_dequeue,16))) && !(sii_wri_ecc0_l7_cycle15 == sii_l2b7_ecc[0]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc0_l7_wri_cycle15
*/

wire sii_wri_ecc1_l7_cycle15 =  (`TOP.cpu.sii_l2t7_req[0] ^ `TOP.cpu.sii_l2t7_req[2] ^ `TOP.cpu.sii_l2t7_req[3] ^ `TOP.cpu.sii_l2t7_req[5] ^ `TOP.cpu.sii_l2t7_req[6] ^ `TOP.cpu.sii_l2t7_req[9] ^ `TOP.cpu.sii_l2t7_req[10] ^ `TOP.cpu.sii_l2t7_req[12] ^ `TOP.cpu.sii_l2t7_req[13] ^ `TOP.cpu.sii_l2t7_req[16] ^ `TOP.cpu.sii_l2t7_req[17] ^ `TOP.cpu.sii_l2t7_req[20] ^ `TOP.cpu.sii_l2t7_req[21] ^ `TOP.cpu.sii_l2t7_req[24] ^ `TOP.cpu.sii_l2t7_req[25] ^ `TOP.cpu.sii_l2t7_req[27] ^ `TOP.cpu.sii_l2t7_req[28] ^ `TOP.cpu.sii_l2t7_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t7_req_vld,16))) && ($0in_delay(sii_l2t7_req[24] == 0,16)) && ($0in_delay(sii_l2t7_req[25] == 0,16)) && ($0in_delay(sii_l2t7_req[26] == 1,16)) && ($0in_rising_edge($0in_delay(l2t7_sii_iq_dequeue,16))) && !(sii_wri_ecc1_l7_cycle15 == sii_l2b7_ecc[1]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc1_l7_wri_cycle15
*/

wire sii_wri_ecc2_l7_cycle15 =  (`TOP.cpu.sii_l2t7_req[1] ^ `TOP.cpu.sii_l2t7_req[2] ^ `TOP.cpu.sii_l2t7_req[3] ^ `TOP.cpu.sii_l2t7_req[7] ^ `TOP.cpu.sii_l2t7_req[8] ^ `TOP.cpu.sii_l2t7_req[9] ^ `TOP.cpu.sii_l2t7_req[10] ^ `TOP.cpu.sii_l2t7_req[14] ^ `TOP.cpu.sii_l2t7_req[15] ^ `TOP.cpu.sii_l2t7_req[16] ^ `TOP.cpu.sii_l2t7_req[17] ^ `TOP.cpu.sii_l2t7_req[22] ^ `TOP.cpu.sii_l2t7_req[23] ^ `TOP.cpu.sii_l2t7_req[24] ^ `TOP.cpu.sii_l2t7_req[25] ^ `TOP.cpu.sii_l2t7_req[29] ^ `TOP.cpu.sii_l2t7_req[30] ^ `TOP.cpu.sii_l2t7_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t7_req_vld,16))) && ($0in_delay(sii_l2t7_req[24] == 0,16)) && ($0in_delay(sii_l2t7_req[25] == 0,16)) && ($0in_delay(sii_l2t7_req[26] == 1,16)) && ($0in_rising_edge($0in_delay(l2t7_sii_iq_dequeue,16))) && !(sii_wri_ecc2_l7_cycle15 == sii_l2b7_ecc[2]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc2_l7_wri_cycle15
*/

wire sii_wri_ecc3_l7_cycle15 =  (`TOP.cpu.sii_l2t7_req[4] ^ `TOP.cpu.sii_l2t7_req[5] ^ `TOP.cpu.sii_l2t7_req[6] ^ `TOP.cpu.sii_l2t7_req[7] ^ `TOP.cpu.sii_l2t7_req[8] ^ `TOP.cpu.sii_l2t7_req[9] ^ `TOP.cpu.sii_l2t7_req[10] ^ `TOP.cpu.sii_l2t7_req[18] ^ `TOP.cpu.sii_l2t7_req[19] ^ `TOP.cpu.sii_l2t7_req[20] ^ `TOP.cpu.sii_l2t7_req[21] ^ `TOP.cpu.sii_l2t7_req[22] ^ `TOP.cpu.sii_l2t7_req[23] ^ `TOP.cpu.sii_l2t7_req[24] ^ `TOP.cpu.sii_l2t7_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t7_req_vld,16))) && ($0in_delay(sii_l2t7_req[24] == 0,16)) && ($0in_delay(sii_l2t7_req[25] == 0,16)) && ($0in_delay(sii_l2t7_req[26] == 1,16)) && ($0in_rising_edge($0in_delay(l2t7_sii_iq_dequeue,16))) && !(sii_wri_ecc3_l7_cycle15 == sii_l2b7_ecc[3]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc3_l7_wri_cycle15
*/

wire sii_wri_ecc4_l7_cycle15 =  ( `TOP.cpu.sii_l2t7_req[11] ^ `TOP.cpu.sii_l2t7_req[12] ^ `TOP.cpu.sii_l2t7_req[13] ^ `TOP.cpu.sii_l2t7_req[14] ^ `TOP.cpu.sii_l2t7_req[15] ^ `TOP.cpu.sii_l2t7_req[16] ^ `TOP.cpu.sii_l2t7_req[17] ^ `TOP.cpu.sii_l2t7_req[18] ^ `TOP.cpu.sii_l2t7_req[19] ^ `TOP.cpu.sii_l2t7_req[20] ^ `TOP.cpu.sii_l2t7_req[21] ^ `TOP.cpu.sii_l2t7_req[22] ^ `TOP.cpu.sii_l2t7_req[23] ^ `TOP.cpu.sii_l2t7_req[24] ^ `TOP.cpu.sii_l2t7_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t7_req_vld,16))) && ($0in_delay(sii_l2t7_req[24] == 0,16)) && ($0in_delay(sii_l2t7_req[25] == 0,16)) && ($0in_delay(sii_l2t7_req[26] == 1,16)) && ($0in_rising_edge($0in_delay(l2t7_sii_iq_dequeue,16))) && !(sii_wri_ecc4_l7_cycle15 == sii_l2b7_ecc[4]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc4_l7_wri_cycle15
*/

wire sii_wri_ecc5_l7_cycle15 =  (`TOP.cpu.sii_l2t7_req[26] ^ `TOP.cpu.sii_l2t7_req[27] ^ `TOP.cpu.sii_l2t7_req[28] ^ `TOP.cpu.sii_l2t7_req[29] ^ `TOP.cpu.sii_l2t7_req[30] ^ `TOP.cpu.sii_l2t7_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t7_req_vld,16))) && ($0in_delay(sii_l2t7_req[24] == 0,16)) && ($0in_delay(sii_l2t7_req[25] == 0,16)) && ($0in_delay(sii_l2t7_req[26] == 1,16)) && ($0in_rising_edge($0in_delay(l2t7_sii_iq_dequeue,16))) && !(sii_wri_ecc5_l7_cycle15 == sii_l2b7_ecc[5]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc5_l7_wri_cycle15
*/

wire sii_wri_ecc6_l7_cycle15 =  (`TOP.cpu.sii_l2t7_req[0] ^ `TOP.cpu.sii_l2t7_req[1] ^ `TOP.cpu.sii_l2t7_req[2] ^ `TOP.cpu.sii_l2t7_req[4] ^ `TOP.cpu.sii_l2t7_req[5] ^ `TOP.cpu.sii_l2t7_req[7] ^ `TOP.cpu.sii_l2t7_req[10] ^ `TOP.cpu.sii_l2t7_req[11] ^ `TOP.cpu.sii_l2t7_req[12] ^ `TOP.cpu.sii_l2t7_req[14] ^ `TOP.cpu.sii_l2t7_req[17] ^ `TOP.cpu.sii_l2t7_req[18] ^ `TOP.cpu.sii_l2t7_req[21] ^ `TOP.cpu.sii_l2t7_req[23] ^ `TOP.cpu.sii_l2t7_req[24] ^ `TOP.cpu.sii_l2t7_req[26] ^ `TOP.cpu.sii_l2t7_req[27] ^ `TOP.cpu.sii_l2t7_req[29] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t7_req_vld,16))) && ($0in_delay(sii_l2t7_req[24] == 0,16)) && ($0in_delay(sii_l2t7_req[25] == 0,16)) && ($0in_delay(sii_l2t7_req[26] == 1,16)) && ($0in_rising_edge($0in_delay(l2t7_sii_iq_dequeue,16))) && !(sii_wri_ecc6_l7_cycle15 == sii_l2b7_ecc[6]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc6_l7_wri_cycle15
*/

wire sii_wri_ecc0_l7_cycle16 =  (`TOP.cpu.sii_l2t7_req[0] ^ `TOP.cpu.sii_l2t7_req[1] ^ `TOP.cpu.sii_l2t7_req[3] ^ `TOP.cpu.sii_l2t7_req[4] ^ `TOP.cpu.sii_l2t7_req[6] ^ `TOP.cpu.sii_l2t7_req[8] ^ `TOP.cpu.sii_l2t7_req[10] ^ `TOP.cpu.sii_l2t7_req[11] ^ `TOP.cpu.sii_l2t7_req[13] ^ `TOP.cpu.sii_l2t7_req[15] ^ `TOP.cpu.sii_l2t7_req[17] ^ `TOP.cpu.sii_l2t7_req[19] ^ `TOP.cpu.sii_l2t7_req[21] ^ `TOP.cpu.sii_l2t7_req[23] ^ `TOP.cpu.sii_l2t7_req[25] ^ `TOP.cpu.sii_l2t7_req[26] ^ `TOP.cpu.sii_l2t7_req[28] ^ `TOP.cpu.sii_l2t7_req[30] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t7_req_vld,17))) && ($0in_delay(sii_l2t7_req[24] == 0,17)) && ($0in_delay(sii_l2t7_req[25] == 0,17)) && ($0in_delay(sii_l2t7_req[26] == 1,17)) && ($0in_rising_edge($0in_delay(l2t7_sii_iq_dequeue,17))) && !(sii_wri_ecc0_l7_cycle16 == sii_l2b7_ecc[0]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc0_l7_wri_cycle16
*/

wire sii_wri_ecc1_l7_cycle16 =  (`TOP.cpu.sii_l2t7_req[0] ^ `TOP.cpu.sii_l2t7_req[2] ^ `TOP.cpu.sii_l2t7_req[3] ^ `TOP.cpu.sii_l2t7_req[5] ^ `TOP.cpu.sii_l2t7_req[6] ^ `TOP.cpu.sii_l2t7_req[9] ^ `TOP.cpu.sii_l2t7_req[10] ^ `TOP.cpu.sii_l2t7_req[12] ^ `TOP.cpu.sii_l2t7_req[13] ^ `TOP.cpu.sii_l2t7_req[16] ^ `TOP.cpu.sii_l2t7_req[17] ^ `TOP.cpu.sii_l2t7_req[20] ^ `TOP.cpu.sii_l2t7_req[21] ^ `TOP.cpu.sii_l2t7_req[24] ^ `TOP.cpu.sii_l2t7_req[25] ^ `TOP.cpu.sii_l2t7_req[27] ^ `TOP.cpu.sii_l2t7_req[28] ^ `TOP.cpu.sii_l2t7_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t7_req_vld,17))) && ($0in_delay(sii_l2t7_req[24] == 0,17)) && ($0in_delay(sii_l2t7_req[25] == 0,17)) && ($0in_delay(sii_l2t7_req[26] == 1,17)) && ($0in_rising_edge($0in_delay(l2t7_sii_iq_dequeue,17))) && !(sii_wri_ecc1_l7_cycle16 == sii_l2b7_ecc[1]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc1_l7_wri_cycle16
*/

wire sii_wri_ecc2_l7_cycle16 =  (`TOP.cpu.sii_l2t7_req[1] ^ `TOP.cpu.sii_l2t7_req[2] ^ `TOP.cpu.sii_l2t7_req[3] ^ `TOP.cpu.sii_l2t7_req[7] ^ `TOP.cpu.sii_l2t7_req[8] ^ `TOP.cpu.sii_l2t7_req[9] ^ `TOP.cpu.sii_l2t7_req[10] ^ `TOP.cpu.sii_l2t7_req[14] ^ `TOP.cpu.sii_l2t7_req[15] ^ `TOP.cpu.sii_l2t7_req[16] ^ `TOP.cpu.sii_l2t7_req[17] ^ `TOP.cpu.sii_l2t7_req[22] ^ `TOP.cpu.sii_l2t7_req[23] ^ `TOP.cpu.sii_l2t7_req[24] ^ `TOP.cpu.sii_l2t7_req[25] ^ `TOP.cpu.sii_l2t7_req[29] ^ `TOP.cpu.sii_l2t7_req[30] ^ `TOP.cpu.sii_l2t7_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t7_req_vld,17))) && ($0in_delay(sii_l2t7_req[24] == 0,17)) && ($0in_delay(sii_l2t7_req[25] == 0,17)) && ($0in_delay(sii_l2t7_req[26] == 1,17)) && ($0in_rising_edge($0in_delay(l2t7_sii_iq_dequeue,17))) && !(sii_wri_ecc2_l7_cycle16 == sii_l2b7_ecc[2]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc2_l7_wri_cycle16
*/

wire sii_wri_ecc3_l7_cycle16 =  (`TOP.cpu.sii_l2t7_req[4] ^ `TOP.cpu.sii_l2t7_req[5] ^ `TOP.cpu.sii_l2t7_req[6] ^ `TOP.cpu.sii_l2t7_req[7] ^ `TOP.cpu.sii_l2t7_req[8] ^ `TOP.cpu.sii_l2t7_req[9] ^ `TOP.cpu.sii_l2t7_req[10] ^ `TOP.cpu.sii_l2t7_req[18] ^ `TOP.cpu.sii_l2t7_req[19] ^ `TOP.cpu.sii_l2t7_req[20] ^ `TOP.cpu.sii_l2t7_req[21] ^ `TOP.cpu.sii_l2t7_req[22] ^ `TOP.cpu.sii_l2t7_req[23] ^ `TOP.cpu.sii_l2t7_req[24] ^ `TOP.cpu.sii_l2t7_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t7_req_vld,17))) && ($0in_delay(sii_l2t7_req[24] == 0,17)) && ($0in_delay(sii_l2t7_req[25] == 0,17)) && ($0in_delay(sii_l2t7_req[26] == 1,17)) && ($0in_rising_edge($0in_delay(l2t7_sii_iq_dequeue,17))) && !(sii_wri_ecc3_l7_cycle16 == sii_l2b7_ecc[3]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc3_l7_wri_cycle16
*/

wire sii_wri_ecc4_l7_cycle16 =  ( `TOP.cpu.sii_l2t7_req[11] ^ `TOP.cpu.sii_l2t7_req[12] ^ `TOP.cpu.sii_l2t7_req[13] ^ `TOP.cpu.sii_l2t7_req[14] ^ `TOP.cpu.sii_l2t7_req[15] ^ `TOP.cpu.sii_l2t7_req[16] ^ `TOP.cpu.sii_l2t7_req[17] ^ `TOP.cpu.sii_l2t7_req[18] ^ `TOP.cpu.sii_l2t7_req[19] ^ `TOP.cpu.sii_l2t7_req[20] ^ `TOP.cpu.sii_l2t7_req[21] ^ `TOP.cpu.sii_l2t7_req[22] ^ `TOP.cpu.sii_l2t7_req[23] ^ `TOP.cpu.sii_l2t7_req[24] ^ `TOP.cpu.sii_l2t7_req[25] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t7_req_vld,17))) && ($0in_delay(sii_l2t7_req[24] == 0,17)) && ($0in_delay(sii_l2t7_req[25] == 0,17)) && ($0in_delay(sii_l2t7_req[26] == 1,17)) && ($0in_rising_edge($0in_delay(l2t7_sii_iq_dequeue,17))) && !(sii_wri_ecc4_l7_cycle16 == sii_l2b7_ecc[4]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc4_l7_wri_cycle16
*/

wire sii_wri_ecc5_l7_cycle16 =  (`TOP.cpu.sii_l2t7_req[26] ^ `TOP.cpu.sii_l2t7_req[27] ^ `TOP.cpu.sii_l2t7_req[28] ^ `TOP.cpu.sii_l2t7_req[29] ^ `TOP.cpu.sii_l2t7_req[30] ^ `TOP.cpu.sii_l2t7_req[31] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t7_req_vld,17))) && ($0in_delay(sii_l2t7_req[24] == 0,17)) && ($0in_delay(sii_l2t7_req[25] == 0,17)) && ($0in_delay(sii_l2t7_req[26] == 1,17)) && ($0in_rising_edge($0in_delay(l2t7_sii_iq_dequeue,17))) && !(sii_wri_ecc5_l7_cycle16 == sii_l2b7_ecc[5]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc5_l7_wri_cycle16
*/

wire sii_wri_ecc6_l7_cycle16 =  (`TOP.cpu.sii_l2t7_req[0] ^ `TOP.cpu.sii_l2t7_req[1] ^ `TOP.cpu.sii_l2t7_req[2] ^ `TOP.cpu.sii_l2t7_req[4] ^ `TOP.cpu.sii_l2t7_req[5] ^ `TOP.cpu.sii_l2t7_req[7] ^ `TOP.cpu.sii_l2t7_req[10] ^ `TOP.cpu.sii_l2t7_req[11] ^ `TOP.cpu.sii_l2t7_req[12] ^ `TOP.cpu.sii_l2t7_req[14] ^ `TOP.cpu.sii_l2t7_req[17] ^ `TOP.cpu.sii_l2t7_req[18] ^ `TOP.cpu.sii_l2t7_req[21] ^ `TOP.cpu.sii_l2t7_req[23] ^ `TOP.cpu.sii_l2t7_req[24] ^ `TOP.cpu.sii_l2t7_req[26] ^ `TOP.cpu.sii_l2t7_req[27] ^ `TOP.cpu.sii_l2t7_req[29] );

/*   0in custom
      -fire (($0in_rising_edge($0in_delay(sii_l2t7_req_vld,17))) && ($0in_delay(sii_l2t7_req[24] == 0,17)) && ($0in_delay(sii_l2t7_req[25] == 0,17)) && ($0in_delay(sii_l2t7_req[26] == 1,17)) && ($0in_rising_edge($0in_delay(l2t7_sii_iq_dequeue,17))) && !(sii_wri_ecc6_l7_cycle16 == sii_l2b7_ecc[6]))
      -clock l2clk
      -message "data ecc error for wri in sii_l2:  data_ecc does not equal ecc"
      -module cpu  -reset `TB_RST
      -name sii_l2_data_ecc6_l7_wri_cycle16
*/


/*************************************************************************
*
*  Check for ctag ecc   L2 -> SIO
*  For RDD, WRI/WR8
*
**************************************************************************/

wire rdd_l0_p0 =  (`TOP.cpu.l2b0_sio_data[0] ^ `TOP.cpu.l2b0_sio_data[1] ^ `TOP.cpu.l2b0_sio_data[3] ^ `TOP.cpu.l2b0_sio_data[4] ^ `TOP.cpu.l2b0_sio_data[6] ^ `TOP.cpu.l2b0_sio_data[8] ^ `TOP.cpu.l2b0_sio_data[10] ^ `TOP.cpu.l2b0_sio_data[11] ^ `TOP.cpu.l2b0_sio_data[13] ^ `TOP.cpu.l2b0_sio_data[15] );

/*   0in custom
      -fire (($0in_rising_edge(l2b0_sio_ctag_vld)) && (l2b0_sio_data[16] == 1) && !(rdd_l0_p0 == l2b0_sio_data[25]))
      -clock l2clk
      -message "ctag error for rdd in l2_sio:  p0 does not equal c0"
      -module cpu  -reset `TB_RST
      -name l2_sio_l0_ctag_ecc_rdd_p0
*/

wire rdd_l0_p1 =  (`TOP.cpu.l2b0_sio_data[0] ^ `TOP.cpu.l2b0_sio_data[2] ^ `TOP.cpu.l2b0_sio_data[3] ^ `TOP.cpu.l2b0_sio_data[5] ^ `TOP.cpu.l2b0_sio_data[6] ^ `TOP.cpu.l2b0_sio_data[9] ^ `TOP.cpu.l2b0_sio_data[10] ^ `TOP.cpu.l2b0_sio_data[12] ^ `TOP.cpu.l2b0_sio_data[13] );

/*   0in custom
      -fire (($0in_rising_edge(l2b0_sio_ctag_vld)) && (l2b0_sio_data[16] == 1) && !(rdd_l0_p1 == l2b0_sio_data[26]))
      -clock l2clk
      -message "ctag error for rdd in l2_sio:  p1 does not equal c1"
      -module cpu  -reset `TB_RST
      -name l2_sio_l0_ctag_ecc_rdd_p1
*/

wire rdd_l0_p2 =  (`TOP.cpu.l2b0_sio_data[1] ^ `TOP.cpu.l2b0_sio_data[2] ^ `TOP.cpu.l2b0_sio_data[3] ^ `TOP.cpu.l2b0_sio_data[7] ^ `TOP.cpu.l2b0_sio_data[8] ^ `TOP.cpu.l2b0_sio_data[9] ^ `TOP.cpu.l2b0_sio_data[10] ^ `TOP.cpu.l2b0_sio_data[14] ^ `TOP.cpu.l2b0_sio_data[15] );

/*   0in custom
      -fire (($0in_rising_edge(l2b0_sio_ctag_vld)) && (l2b0_sio_data[16] == 1) && !(rdd_l0_p2 == l2b0_sio_data[27]))
      -clock l2clk
      -message "ctag error for rdd in l2_sio:  p2 does not equal c2"
      -module cpu  -reset `TB_RST
      -name l2_sio_l0_ctag_ecc_rdd_p2
*/

wire rdd_l0_p3 =  (`TOP.cpu.l2b0_sio_data[4] ^ `TOP.cpu.l2b0_sio_data[5] ^ `TOP.cpu.l2b0_sio_data[6] ^ `TOP.cpu.l2b0_sio_data[7] ^ `TOP.cpu.l2b0_sio_data[8] ^ `TOP.cpu.l2b0_sio_data[9] ^ `TOP.cpu.l2b0_sio_data[10] );

/*   0in custom
      -fire (($0in_rising_edge(l2b0_sio_ctag_vld)) && (l2b0_sio_data[16] == 1) && !(rdd_l0_p3 == l2b0_sio_data[28]))
      -clock l2clk
      -message "ctag error for rdd in l2_sio:  p3 does not equal c3"
      -module cpu  -reset `TB_RST
      -name l2_sio_l0_ctag_ecc_rdd_p3
*/

wire rdd_l0_p4 =  (`TOP.cpu.l2b0_sio_data[11] ^ `TOP.cpu.l2b0_sio_data[12] ^ `TOP.cpu.l2b0_sio_data[13] ^ `TOP.cpu.l2b0_sio_data[14] ^ `TOP.cpu.l2b0_sio_data[15] );

/*   0in custom
      -fire (($0in_rising_edge(l2b0_sio_ctag_vld)) && (l2b0_sio_data[16] == 1) && !(rdd_l0_p4 == l2b0_sio_data[29]))
      -clock l2clk
      -message "ctag error for rdd in l2_sio:  p4 does not equal c4"
      -module cpu  -reset `TB_RST
      -name l2_sio_l0_ctag_ecc_rdd_p4
*/

wire rdd_l0_p5 =  (`TOP.cpu.l2b0_sio_data[0] ^ `TOP.cpu.l2b0_sio_data[1] ^ `TOP.cpu.l2b0_sio_data[2] ^ `TOP.cpu.l2b0_sio_data[4] ^ `TOP.cpu.l2b0_sio_data[5] ^ `TOP.cpu.l2b0_sio_data[7] ^ `TOP.cpu.l2b0_sio_data[10] ^ `TOP.cpu.l2b0_sio_data[11] ^ `TOP.cpu.l2b0_sio_data[12] ^ `TOP.cpu.l2b0_sio_data[14] );

/*   0in custom
      -fire (($0in_rising_edge(l2b0_sio_ctag_vld)) && (l2b0_sio_data[16] == 1) && !(rdd_l0_p5 == l2b0_sio_data[30]))
      -clock l2clk
      -message "ctag error for rdd in l2_sio:  p5 does not equal c5"
      -module cpu  -reset `TB_RST
      -name l2_sio_l0_ctag_ecc_rdd_p5
*/

wire rdd_l1_p0 =  (`TOP.cpu.l2b1_sio_data[0] ^ `TOP.cpu.l2b1_sio_data[1] ^ `TOP.cpu.l2b1_sio_data[3] ^ `TOP.cpu.l2b1_sio_data[4] ^ `TOP.cpu.l2b1_sio_data[6] ^ `TOP.cpu.l2b1_sio_data[8] ^ `TOP.cpu.l2b1_sio_data[10] ^ `TOP.cpu.l2b1_sio_data[11] ^ `TOP.cpu.l2b1_sio_data[13] ^ `TOP.cpu.l2b1_sio_data[15] );

/*   0in custom
      -fire (($0in_rising_edge(l2b1_sio_ctag_vld)) && (l2b1_sio_data[16] == 1) && !(rdd_l1_p0 == l2b1_sio_data[25]))
      -clock l2clk
      -message "ctag error for rdd in l2_sio:  p0 does not equal c0"
      -module cpu  -reset `TB_RST
      -name l2_sio_l1_ctag_ecc_rdd_p0
*/

wire rdd_l1_p1 =  (`TOP.cpu.l2b1_sio_data[0] ^ `TOP.cpu.l2b1_sio_data[2] ^ `TOP.cpu.l2b1_sio_data[3] ^ `TOP.cpu.l2b1_sio_data[5] ^ `TOP.cpu.l2b1_sio_data[6] ^ `TOP.cpu.l2b1_sio_data[9] ^ `TOP.cpu.l2b1_sio_data[10] ^ `TOP.cpu.l2b1_sio_data[12] ^ `TOP.cpu.l2b1_sio_data[13] );

/*   0in custom
      -fire (($0in_rising_edge(l2b1_sio_ctag_vld)) && (l2b1_sio_data[16] == 1) && !(rdd_l1_p1 == l2b1_sio_data[26]))
      -clock l2clk
      -message "ctag error for rdd in l2_sio:  p1 does not equal c1"
      -module cpu  -reset `TB_RST
      -name l2_sio_l1_ctag_ecc_rdd_p1
*/

wire rdd_l1_p2 =  (`TOP.cpu.l2b1_sio_data[1] ^ `TOP.cpu.l2b1_sio_data[2] ^ `TOP.cpu.l2b1_sio_data[3] ^ `TOP.cpu.l2b1_sio_data[7] ^ `TOP.cpu.l2b1_sio_data[8] ^ `TOP.cpu.l2b1_sio_data[9] ^ `TOP.cpu.l2b1_sio_data[10] ^ `TOP.cpu.l2b1_sio_data[14] ^ `TOP.cpu.l2b1_sio_data[15] );

/*   0in custom
      -fire (($0in_rising_edge(l2b1_sio_ctag_vld)) && (l2b1_sio_data[16] == 1) && !(rdd_l1_p2 == l2b1_sio_data[27]))
      -clock l2clk
      -message "ctag error for rdd in l2_sio:  p2 does not equal c2"
      -module cpu  -reset `TB_RST
      -name l2_sio_l1_ctag_ecc_rdd_p2
*/

wire rdd_l1_p3 =  (`TOP.cpu.l2b1_sio_data[4] ^ `TOP.cpu.l2b1_sio_data[5] ^ `TOP.cpu.l2b1_sio_data[6] ^ `TOP.cpu.l2b1_sio_data[7] ^ `TOP.cpu.l2b1_sio_data[8] ^ `TOP.cpu.l2b1_sio_data[9] ^ `TOP.cpu.l2b1_sio_data[10] );

/*   0in custom
      -fire (($0in_rising_edge(l2b1_sio_ctag_vld)) && (l2b1_sio_data[16] == 1) && !(rdd_l1_p3 == l2b1_sio_data[28]))
      -clock l2clk
      -message "ctag error for rdd in l2_sio:  p3 does not equal c3"
      -module cpu  -reset `TB_RST
      -name l2_sio_l1_ctag_ecc_rdd_p3
*/

wire rdd_l1_p4 =  (`TOP.cpu.l2b1_sio_data[11] ^ `TOP.cpu.l2b1_sio_data[12] ^ `TOP.cpu.l2b1_sio_data[13] ^ `TOP.cpu.l2b1_sio_data[14] ^ `TOP.cpu.l2b1_sio_data[15] );

/*   0in custom
      -fire (($0in_rising_edge(l2b1_sio_ctag_vld)) && (l2b1_sio_data[16] == 1) && !(rdd_l1_p4 == l2b1_sio_data[29]))
      -clock l2clk
      -message "ctag error for rdd in l2_sio:  p4 does not equal c4"
      -module cpu  -reset `TB_RST
      -name l2_sio_l1_ctag_ecc_rdd_p4
*/

wire rdd_l1_p5 =  (`TOP.cpu.l2b1_sio_data[0] ^ `TOP.cpu.l2b1_sio_data[1] ^ `TOP.cpu.l2b1_sio_data[2] ^ `TOP.cpu.l2b1_sio_data[4] ^ `TOP.cpu.l2b1_sio_data[5] ^ `TOP.cpu.l2b1_sio_data[7] ^ `TOP.cpu.l2b1_sio_data[10] ^ `TOP.cpu.l2b1_sio_data[11] ^ `TOP.cpu.l2b1_sio_data[12] ^ `TOP.cpu.l2b1_sio_data[14] );

/*   0in custom
      -fire (($0in_rising_edge(l2b1_sio_ctag_vld)) && (l2b1_sio_data[16] == 1) && !(rdd_l1_p5 == l2b1_sio_data[30]))
      -clock l2clk
      -message "ctag error for rdd in l2_sio:  p5 does not equal c5"
      -module cpu  -reset `TB_RST
      -name l2_sio_l1_ctag_ecc_rdd_p5
*/

wire rdd_l2_p0 =  (`TOP.cpu.l2b2_sio_data[0] ^ `TOP.cpu.l2b2_sio_data[1] ^ `TOP.cpu.l2b2_sio_data[3] ^ `TOP.cpu.l2b2_sio_data[4] ^ `TOP.cpu.l2b2_sio_data[6] ^ `TOP.cpu.l2b2_sio_data[8] ^ `TOP.cpu.l2b2_sio_data[10] ^ `TOP.cpu.l2b2_sio_data[11] ^ `TOP.cpu.l2b2_sio_data[13] ^ `TOP.cpu.l2b2_sio_data[15] );

/*   0in custom
      -fire (($0in_rising_edge(l2b2_sio_ctag_vld)) && (l2b2_sio_data[16] == 1) && !(rdd_l2_p0 == l2b2_sio_data[25]))
      -clock l2clk
      -message "ctag error for rdd in l2_sio:  p0 does not equal c0"
      -module cpu  -reset `TB_RST
      -name l2_sio_l2_ctag_ecc_rdd_p0
*/

wire rdd_l2_p1 =  (`TOP.cpu.l2b2_sio_data[0] ^ `TOP.cpu.l2b2_sio_data[2] ^ `TOP.cpu.l2b2_sio_data[3] ^ `TOP.cpu.l2b2_sio_data[5] ^ `TOP.cpu.l2b2_sio_data[6] ^ `TOP.cpu.l2b2_sio_data[9] ^ `TOP.cpu.l2b2_sio_data[10] ^ `TOP.cpu.l2b2_sio_data[12] ^ `TOP.cpu.l2b2_sio_data[13] );

/*   0in custom
      -fire (($0in_rising_edge(l2b2_sio_ctag_vld)) && (l2b2_sio_data[16] == 1) && !(rdd_l2_p1 == l2b2_sio_data[26]))
      -clock l2clk
      -message "ctag error for rdd in l2_sio:  p1 does not equal c1"
      -module cpu  -reset `TB_RST
      -name l2_sio_l2_ctag_ecc_rdd_p1
*/

wire rdd_l2_p2 =  (`TOP.cpu.l2b2_sio_data[1] ^ `TOP.cpu.l2b2_sio_data[2] ^ `TOP.cpu.l2b2_sio_data[3] ^ `TOP.cpu.l2b2_sio_data[7] ^ `TOP.cpu.l2b2_sio_data[8] ^ `TOP.cpu.l2b2_sio_data[9] ^ `TOP.cpu.l2b2_sio_data[10] ^ `TOP.cpu.l2b2_sio_data[14] ^ `TOP.cpu.l2b2_sio_data[15] );

/*   0in custom
      -fire (($0in_rising_edge(l2b2_sio_ctag_vld)) && (l2b2_sio_data[16] == 1) && !(rdd_l2_p2 == l2b2_sio_data[27]))
      -clock l2clk
      -message "ctag error for rdd in l2_sio:  p2 does not equal c2"
      -module cpu  -reset `TB_RST
      -name l2_sio_l2_ctag_ecc_rdd_p2
*/

wire rdd_l2_p3 =  (`TOP.cpu.l2b2_sio_data[4] ^ `TOP.cpu.l2b2_sio_data[5] ^ `TOP.cpu.l2b2_sio_data[6] ^ `TOP.cpu.l2b2_sio_data[7] ^ `TOP.cpu.l2b2_sio_data[8] ^ `TOP.cpu.l2b2_sio_data[9] ^ `TOP.cpu.l2b2_sio_data[10] );

/*   0in custom
      -fire (($0in_rising_edge(l2b2_sio_ctag_vld)) && (l2b2_sio_data[16] == 1) && !(rdd_l2_p3 == l2b2_sio_data[28]))
      -clock l2clk
      -message "ctag error for rdd in l2_sio:  p3 does not equal c3"
      -module cpu  -reset `TB_RST
      -name l2_sio_l2_ctag_ecc_rdd_p3
*/

wire rdd_l2_p4 =  (`TOP.cpu.l2b2_sio_data[11] ^ `TOP.cpu.l2b2_sio_data[12] ^ `TOP.cpu.l2b2_sio_data[13] ^ `TOP.cpu.l2b2_sio_data[14] ^ `TOP.cpu.l2b2_sio_data[15] );

/*   0in custom
      -fire (($0in_rising_edge(l2b2_sio_ctag_vld)) && (l2b2_sio_data[16] == 1) && !(rdd_l2_p4 == l2b2_sio_data[29]))
      -clock l2clk
      -message "ctag error for rdd in l2_sio:  p4 does not equal c4"
      -module cpu  -reset `TB_RST
      -name l2_sio_l2_ctag_ecc_rdd_p4
*/

wire rdd_l2_p5 =  (`TOP.cpu.l2b2_sio_data[0] ^ `TOP.cpu.l2b2_sio_data[1] ^ `TOP.cpu.l2b2_sio_data[2] ^ `TOP.cpu.l2b2_sio_data[4] ^ `TOP.cpu.l2b2_sio_data[5] ^ `TOP.cpu.l2b2_sio_data[7] ^ `TOP.cpu.l2b2_sio_data[10] ^ `TOP.cpu.l2b2_sio_data[11] ^ `TOP.cpu.l2b2_sio_data[12] ^ `TOP.cpu.l2b2_sio_data[14] );

/*   0in custom
      -fire (($0in_rising_edge(l2b2_sio_ctag_vld)) && (l2b2_sio_data[16] == 1) && !(rdd_l2_p5 == l2b2_sio_data[30]))
      -clock l2clk
      -message "ctag error for rdd in l2_sio:  p5 does not equal c5"
      -module cpu  -reset `TB_RST
      -name l2_sio_l2_ctag_ecc_rdd_p5
*/

wire rdd_l3_p0 =  (`TOP.cpu.l2b3_sio_data[0] ^ `TOP.cpu.l2b3_sio_data[1] ^ `TOP.cpu.l2b3_sio_data[3] ^ `TOP.cpu.l2b3_sio_data[4] ^ `TOP.cpu.l2b3_sio_data[6] ^ `TOP.cpu.l2b3_sio_data[8] ^ `TOP.cpu.l2b3_sio_data[10] ^ `TOP.cpu.l2b3_sio_data[11] ^ `TOP.cpu.l2b3_sio_data[13] ^ `TOP.cpu.l2b3_sio_data[15] );

/*   0in custom
      -fire (($0in_rising_edge(l2b3_sio_ctag_vld)) && (l2b3_sio_data[16] == 1) && !(rdd_l3_p0 == l2b3_sio_data[25]))
      -clock l2clk
      -message "ctag error for rdd in l2_sio:  p0 does not equal c0"
      -module cpu  -reset `TB_RST
      -name l2_sio_l3_ctag_ecc_rdd_p0
*/

wire rdd_l3_p1 =  (`TOP.cpu.l2b3_sio_data[0] ^ `TOP.cpu.l2b3_sio_data[2] ^ `TOP.cpu.l2b3_sio_data[3] ^ `TOP.cpu.l2b3_sio_data[5] ^ `TOP.cpu.l2b3_sio_data[6] ^ `TOP.cpu.l2b3_sio_data[9] ^ `TOP.cpu.l2b3_sio_data[10] ^ `TOP.cpu.l2b3_sio_data[12] ^ `TOP.cpu.l2b3_sio_data[13] );

/*   0in custom
      -fire (($0in_rising_edge(l2b3_sio_ctag_vld)) && (l2b3_sio_data[16] == 1) && !(rdd_l3_p1 == l2b3_sio_data[26]))
      -clock l2clk
      -message "ctag error for rdd in l2_sio:  p1 does not equal c1"
      -module cpu  -reset `TB_RST
      -name l2_sio_l3_ctag_ecc_rdd_p1
*/

wire rdd_l3_p2 =  (`TOP.cpu.l2b3_sio_data[1] ^ `TOP.cpu.l2b3_sio_data[2] ^ `TOP.cpu.l2b3_sio_data[3] ^ `TOP.cpu.l2b3_sio_data[7] ^ `TOP.cpu.l2b3_sio_data[8] ^ `TOP.cpu.l2b3_sio_data[9] ^ `TOP.cpu.l2b3_sio_data[10] ^ `TOP.cpu.l2b3_sio_data[14] ^ `TOP.cpu.l2b3_sio_data[15] );

/*   0in custom
      -fire (($0in_rising_edge(l2b3_sio_ctag_vld)) && (l2b3_sio_data[16] == 1) && !(rdd_l3_p2 == l2b3_sio_data[27]))
      -clock l2clk
      -message "ctag error for rdd in l2_sio:  p2 does not equal c2"
      -module cpu  -reset `TB_RST
      -name l2_sio_l3_ctag_ecc_rdd_p2
*/

wire rdd_l3_p3 =  (`TOP.cpu.l2b3_sio_data[4] ^ `TOP.cpu.l2b3_sio_data[5] ^ `TOP.cpu.l2b3_sio_data[6] ^ `TOP.cpu.l2b3_sio_data[7] ^ `TOP.cpu.l2b3_sio_data[8] ^ `TOP.cpu.l2b3_sio_data[9] ^ `TOP.cpu.l2b3_sio_data[10] );

/*   0in custom
      -fire (($0in_rising_edge(l2b3_sio_ctag_vld)) && (l2b3_sio_data[16] == 1) && !(rdd_l3_p3 == l2b3_sio_data[28]))
      -clock l2clk
      -message "ctag error for rdd in l2_sio:  p3 does not equal c3"
      -module cpu  -reset `TB_RST
      -name l2_sio_l3_ctag_ecc_rdd_p3
*/

wire rdd_l3_p4 =  (`TOP.cpu.l2b3_sio_data[11] ^ `TOP.cpu.l2b3_sio_data[12] ^ `TOP.cpu.l2b3_sio_data[13] ^ `TOP.cpu.l2b3_sio_data[14] ^ `TOP.cpu.l2b3_sio_data[15] );

/*   0in custom
      -fire (($0in_rising_edge(l2b3_sio_ctag_vld)) && (l2b3_sio_data[16] == 1) && !(rdd_l3_p4 == l2b3_sio_data[29]))
      -clock l2clk
      -message "ctag error for rdd in l2_sio:  p4 does not equal c4"
      -module cpu  -reset `TB_RST
      -name l2_sio_l3_ctag_ecc_rdd_p4
*/

wire rdd_l3_p5 =  (`TOP.cpu.l2b3_sio_data[0] ^ `TOP.cpu.l2b3_sio_data[1] ^ `TOP.cpu.l2b3_sio_data[2] ^ `TOP.cpu.l2b3_sio_data[4] ^ `TOP.cpu.l2b3_sio_data[5] ^ `TOP.cpu.l2b3_sio_data[7] ^ `TOP.cpu.l2b3_sio_data[10] ^ `TOP.cpu.l2b3_sio_data[11] ^ `TOP.cpu.l2b3_sio_data[12] ^ `TOP.cpu.l2b3_sio_data[14] );

/*   0in custom
      -fire (($0in_rising_edge(l2b3_sio_ctag_vld)) && (l2b3_sio_data[16] == 1) && !(rdd_l3_p5 == l2b3_sio_data[30]))
      -clock l2clk
      -message "ctag error for rdd in l2_sio:  p5 does not equal c5"
      -module cpu  -reset `TB_RST
      -name l2_sio_l3_ctag_ecc_rdd_p5
*/

wire rdd_l4_p0 =  (`TOP.cpu.l2b4_sio_data[0] ^ `TOP.cpu.l2b4_sio_data[1] ^ `TOP.cpu.l2b4_sio_data[3] ^ `TOP.cpu.l2b4_sio_data[4] ^ `TOP.cpu.l2b4_sio_data[6] ^ `TOP.cpu.l2b4_sio_data[8] ^ `TOP.cpu.l2b4_sio_data[10] ^ `TOP.cpu.l2b4_sio_data[11] ^ `TOP.cpu.l2b4_sio_data[13] ^ `TOP.cpu.l2b4_sio_data[15] );

/*   0in custom
      -fire (($0in_rising_edge(l2b4_sio_ctag_vld)) && (l2b4_sio_data[16] == 1) && !(rdd_l4_p0 == l2b4_sio_data[25]))
      -clock l2clk
      -message "ctag error for rdd in l2_sio:  p0 does not equal c0"
      -module cpu  -reset `TB_RST
      -name l2_sio_l4_ctag_ecc_rdd_p0
*/

wire rdd_l4_p1 =  (`TOP.cpu.l2b4_sio_data[0] ^ `TOP.cpu.l2b4_sio_data[2] ^ `TOP.cpu.l2b4_sio_data[3] ^ `TOP.cpu.l2b4_sio_data[5] ^ `TOP.cpu.l2b4_sio_data[6] ^ `TOP.cpu.l2b4_sio_data[9] ^ `TOP.cpu.l2b4_sio_data[10] ^ `TOP.cpu.l2b4_sio_data[12] ^ `TOP.cpu.l2b4_sio_data[13] );

/*   0in custom
      -fire (($0in_rising_edge(l2b4_sio_ctag_vld)) && (l2b4_sio_data[16] == 1) && !(rdd_l4_p1 == l2b4_sio_data[26]))
      -clock l2clk
      -message "ctag error for rdd in l2_sio:  p1 does not equal c1"
      -module cpu  -reset `TB_RST
      -name l2_sio_l4_ctag_ecc_rdd_p1
*/

wire rdd_l4_p2 =  (`TOP.cpu.l2b4_sio_data[1] ^ `TOP.cpu.l2b4_sio_data[2] ^ `TOP.cpu.l2b4_sio_data[3] ^ `TOP.cpu.l2b4_sio_data[7] ^ `TOP.cpu.l2b4_sio_data[8] ^ `TOP.cpu.l2b4_sio_data[9] ^ `TOP.cpu.l2b4_sio_data[10] ^ `TOP.cpu.l2b4_sio_data[14] ^ `TOP.cpu.l2b4_sio_data[15] );

/*   0in custom
      -fire (($0in_rising_edge(l2b4_sio_ctag_vld)) && (l2b4_sio_data[16] == 1) && !(rdd_l4_p2 == l2b4_sio_data[27]))
      -clock l2clk
      -message "ctag error for rdd in l2_sio:  p2 does not equal c2"
      -module cpu  -reset `TB_RST
      -name l2_sio_l4_ctag_ecc_rdd_p2
*/

wire rdd_l4_p3 =  (`TOP.cpu.l2b4_sio_data[4] ^ `TOP.cpu.l2b4_sio_data[5] ^ `TOP.cpu.l2b4_sio_data[6] ^ `TOP.cpu.l2b4_sio_data[7] ^ `TOP.cpu.l2b4_sio_data[8] ^ `TOP.cpu.l2b4_sio_data[9] ^ `TOP.cpu.l2b4_sio_data[10] );

/*   0in custom
      -fire (($0in_rising_edge(l2b4_sio_ctag_vld)) && (l2b4_sio_data[16] == 1) && !(rdd_l4_p3 == l2b4_sio_data[28]))
      -clock l2clk
      -message "ctag error for rdd in l2_sio:  p3 does not equal c3"
      -module cpu  -reset `TB_RST
      -name l2_sio_l4_ctag_ecc_rdd_p3
*/

wire rdd_l4_p4 =  (`TOP.cpu.l2b4_sio_data[11] ^ `TOP.cpu.l2b4_sio_data[12] ^ `TOP.cpu.l2b4_sio_data[13] ^ `TOP.cpu.l2b4_sio_data[14] ^ `TOP.cpu.l2b4_sio_data[15] );

/*   0in custom
      -fire (($0in_rising_edge(l2b4_sio_ctag_vld)) && (l2b4_sio_data[16] == 1) && !(rdd_l4_p4 == l2b4_sio_data[29]))
      -clock l2clk
      -message "ctag error for rdd in l2_sio:  p4 does not equal c4"
      -module cpu  -reset `TB_RST
      -name l2_sio_l4_ctag_ecc_rdd_p4
*/

wire rdd_l4_p5 =  (`TOP.cpu.l2b4_sio_data[0] ^ `TOP.cpu.l2b4_sio_data[1] ^ `TOP.cpu.l2b4_sio_data[2] ^ `TOP.cpu.l2b4_sio_data[4] ^ `TOP.cpu.l2b4_sio_data[5] ^ `TOP.cpu.l2b4_sio_data[7] ^ `TOP.cpu.l2b4_sio_data[10] ^ `TOP.cpu.l2b4_sio_data[11] ^ `TOP.cpu.l2b4_sio_data[12] ^ `TOP.cpu.l2b4_sio_data[14] );

/*   0in custom
      -fire (($0in_rising_edge(l2b4_sio_ctag_vld)) && (l2b4_sio_data[16] == 1) && !(rdd_l4_p5 == l2b4_sio_data[30]))
      -clock l2clk
      -message "ctag error for rdd in l2_sio:  p5 does not equal c5"
      -module cpu  -reset `TB_RST
      -name l2_sio_l4_ctag_ecc_rdd_p5
*/

wire rdd_l5_p0 =  (`TOP.cpu.l2b5_sio_data[0] ^ `TOP.cpu.l2b5_sio_data[1] ^ `TOP.cpu.l2b5_sio_data[3] ^ `TOP.cpu.l2b5_sio_data[4] ^ `TOP.cpu.l2b5_sio_data[6] ^ `TOP.cpu.l2b5_sio_data[8] ^ `TOP.cpu.l2b5_sio_data[10] ^ `TOP.cpu.l2b5_sio_data[11] ^ `TOP.cpu.l2b5_sio_data[13] ^ `TOP.cpu.l2b5_sio_data[15] );

/*   0in custom
      -fire (($0in_rising_edge(l2b5_sio_ctag_vld)) && (l2b5_sio_data[16] == 1) && !(rdd_l5_p0 == l2b5_sio_data[25]))
      -clock l2clk
      -message "ctag error for rdd in l2_sio:  p0 does not equal c0"
      -module cpu  -reset `TB_RST
      -name l2_sio_l5_ctag_ecc_rdd_p0
*/

wire rdd_l5_p1 =  (`TOP.cpu.l2b5_sio_data[0] ^ `TOP.cpu.l2b5_sio_data[2] ^ `TOP.cpu.l2b5_sio_data[3] ^ `TOP.cpu.l2b5_sio_data[5] ^ `TOP.cpu.l2b5_sio_data[6] ^ `TOP.cpu.l2b5_sio_data[9] ^ `TOP.cpu.l2b5_sio_data[10] ^ `TOP.cpu.l2b5_sio_data[12] ^ `TOP.cpu.l2b5_sio_data[13] );

/*   0in custom
      -fire (($0in_rising_edge(l2b5_sio_ctag_vld)) && (l2b5_sio_data[16] == 1) && !(rdd_l5_p1 == l2b5_sio_data[26]))
      -clock l2clk
      -message "ctag error for rdd in l2_sio:  p1 does not equal c1"
      -module cpu  -reset `TB_RST
      -name l2_sio_l5_ctag_ecc_rdd_p1
*/

wire rdd_l5_p2 =  (`TOP.cpu.l2b5_sio_data[1] ^ `TOP.cpu.l2b5_sio_data[2] ^ `TOP.cpu.l2b5_sio_data[3] ^ `TOP.cpu.l2b5_sio_data[7] ^ `TOP.cpu.l2b5_sio_data[8] ^ `TOP.cpu.l2b5_sio_data[9] ^ `TOP.cpu.l2b5_sio_data[10] ^ `TOP.cpu.l2b5_sio_data[14] ^ `TOP.cpu.l2b5_sio_data[15] );

/*   0in custom
      -fire (($0in_rising_edge(l2b5_sio_ctag_vld)) && (l2b5_sio_data[16] == 1) && !(rdd_l5_p2 == l2b5_sio_data[27]))
      -clock l2clk
      -message "ctag error for rdd in l2_sio:  p2 does not equal c2"
      -module cpu  -reset `TB_RST
      -name l2_sio_l5_ctag_ecc_rdd_p2
*/

wire rdd_l5_p3 =  (`TOP.cpu.l2b5_sio_data[4] ^ `TOP.cpu.l2b5_sio_data[5] ^ `TOP.cpu.l2b5_sio_data[6] ^ `TOP.cpu.l2b5_sio_data[7] ^ `TOP.cpu.l2b5_sio_data[8] ^ `TOP.cpu.l2b5_sio_data[9] ^ `TOP.cpu.l2b5_sio_data[10] );

/*   0in custom
      -fire (($0in_rising_edge(l2b5_sio_ctag_vld)) && (l2b5_sio_data[16] == 1) && !(rdd_l5_p3 == l2b5_sio_data[28]))
      -clock l2clk
      -message "ctag error for rdd in l2_sio:  p3 does not equal c3"
      -module cpu  -reset `TB_RST
      -name l2_sio_l5_ctag_ecc_rdd_p3
*/

wire rdd_l5_p4 =  (`TOP.cpu.l2b5_sio_data[11] ^ `TOP.cpu.l2b5_sio_data[12] ^ `TOP.cpu.l2b5_sio_data[13] ^ `TOP.cpu.l2b5_sio_data[14] ^ `TOP.cpu.l2b5_sio_data[15] );

/*   0in custom
      -fire (($0in_rising_edge(l2b5_sio_ctag_vld)) && (l2b5_sio_data[16] == 1) && !(rdd_l5_p4 == l2b5_sio_data[29]))
      -clock l2clk
      -message "ctag error for rdd in l2_sio:  p4 does not equal c4"
      -module cpu  -reset `TB_RST
      -name l2_sio_l5_ctag_ecc_rdd_p4
*/

wire rdd_l5_p5 =  (`TOP.cpu.l2b5_sio_data[0] ^ `TOP.cpu.l2b5_sio_data[1] ^ `TOP.cpu.l2b5_sio_data[2] ^ `TOP.cpu.l2b5_sio_data[4] ^ `TOP.cpu.l2b5_sio_data[5] ^ `TOP.cpu.l2b5_sio_data[7] ^ `TOP.cpu.l2b5_sio_data[10] ^ `TOP.cpu.l2b5_sio_data[11] ^ `TOP.cpu.l2b5_sio_data[12] ^ `TOP.cpu.l2b5_sio_data[14] );

/*   0in custom
      -fire (($0in_rising_edge(l2b5_sio_ctag_vld)) && (l2b5_sio_data[16] == 1) && !(rdd_l5_p5 == l2b5_sio_data[30]))
      -clock l2clk
      -message "ctag error for rdd in l2_sio:  p5 does not equal c5"
      -module cpu  -reset `TB_RST
      -name l2_sio_l5_ctag_ecc_rdd_p5
*/

wire rdd_l6_p0 =  (`TOP.cpu.l2b6_sio_data[0] ^ `TOP.cpu.l2b6_sio_data[1] ^ `TOP.cpu.l2b6_sio_data[3] ^ `TOP.cpu.l2b6_sio_data[4] ^ `TOP.cpu.l2b6_sio_data[6] ^ `TOP.cpu.l2b6_sio_data[8] ^ `TOP.cpu.l2b6_sio_data[10] ^ `TOP.cpu.l2b6_sio_data[11] ^ `TOP.cpu.l2b6_sio_data[13] ^ `TOP.cpu.l2b6_sio_data[15] );

/*   0in custom
      -fire (($0in_rising_edge(l2b6_sio_ctag_vld)) && (l2b6_sio_data[16] == 1) && !(rdd_l6_p0 == l2b6_sio_data[25]))
      -clock l2clk
      -message "ctag error for rdd in l2_sio:  p0 does not equal c0"
      -module cpu  -reset `TB_RST
      -name l2_sio_l6_ctag_ecc_rdd_p0
*/

wire rdd_l6_p1 =  (`TOP.cpu.l2b6_sio_data[0] ^ `TOP.cpu.l2b6_sio_data[2] ^ `TOP.cpu.l2b6_sio_data[3] ^ `TOP.cpu.l2b6_sio_data[5] ^ `TOP.cpu.l2b6_sio_data[6] ^ `TOP.cpu.l2b6_sio_data[9] ^ `TOP.cpu.l2b6_sio_data[10] ^ `TOP.cpu.l2b6_sio_data[12] ^ `TOP.cpu.l2b6_sio_data[13] );

/*   0in custom
      -fire (($0in_rising_edge(l2b6_sio_ctag_vld)) && (l2b6_sio_data[16] == 1) && !(rdd_l6_p1 == l2b6_sio_data[26]))
      -clock l2clk
      -message "ctag error for rdd in l2_sio:  p1 does not equal c1"
      -module cpu  -reset `TB_RST
      -name l2_sio_l6_ctag_ecc_rdd_p1
*/

wire rdd_l6_p2 =  (`TOP.cpu.l2b6_sio_data[1] ^ `TOP.cpu.l2b6_sio_data[2] ^ `TOP.cpu.l2b6_sio_data[3] ^ `TOP.cpu.l2b6_sio_data[7] ^ `TOP.cpu.l2b6_sio_data[8] ^ `TOP.cpu.l2b6_sio_data[9] ^ `TOP.cpu.l2b6_sio_data[10] ^ `TOP.cpu.l2b6_sio_data[14] ^ `TOP.cpu.l2b6_sio_data[15] );

/*   0in custom
      -fire (($0in_rising_edge(l2b6_sio_ctag_vld)) && (l2b6_sio_data[16] == 1) && !(rdd_l6_p2 == l2b6_sio_data[27]))
      -clock l2clk
      -message "ctag error for rdd in l2_sio:  p2 does not equal c2"
      -module cpu  -reset `TB_RST
      -name l2_sio_l6_ctag_ecc_rdd_p2
*/

wire rdd_l6_p3 =  (`TOP.cpu.l2b6_sio_data[4] ^ `TOP.cpu.l2b6_sio_data[5] ^ `TOP.cpu.l2b6_sio_data[6] ^ `TOP.cpu.l2b6_sio_data[7] ^ `TOP.cpu.l2b6_sio_data[8] ^ `TOP.cpu.l2b6_sio_data[9] ^ `TOP.cpu.l2b6_sio_data[10] );

/*   0in custom
      -fire (($0in_rising_edge(l2b6_sio_ctag_vld)) && (l2b6_sio_data[16] == 1) && !(rdd_l6_p3 == l2b6_sio_data[28]))
      -clock l2clk
      -message "ctag error for rdd in l2_sio:  p3 does not equal c3"
      -module cpu  -reset `TB_RST
      -name l2_sio_l6_ctag_ecc_rdd_p3
*/

wire rdd_l6_p4 =  (`TOP.cpu.l2b6_sio_data[11] ^ `TOP.cpu.l2b6_sio_data[12] ^ `TOP.cpu.l2b6_sio_data[13] ^ `TOP.cpu.l2b6_sio_data[14] ^ `TOP.cpu.l2b6_sio_data[15] );

/*   0in custom
      -fire (($0in_rising_edge(l2b6_sio_ctag_vld)) && (l2b6_sio_data[16] == 1) && !(rdd_l6_p4 == l2b6_sio_data[29]))
      -clock l2clk
      -message "ctag error for rdd in l2_sio:  p4 does not equal c4"
      -module cpu  -reset `TB_RST
      -name l2_sio_l6_ctag_ecc_rdd_p4
*/

wire rdd_l6_p5 =  (`TOP.cpu.l2b6_sio_data[0] ^ `TOP.cpu.l2b6_sio_data[1] ^ `TOP.cpu.l2b6_sio_data[2] ^ `TOP.cpu.l2b6_sio_data[4] ^ `TOP.cpu.l2b6_sio_data[5] ^ `TOP.cpu.l2b6_sio_data[7] ^ `TOP.cpu.l2b6_sio_data[10] ^ `TOP.cpu.l2b6_sio_data[11] ^ `TOP.cpu.l2b6_sio_data[12] ^ `TOP.cpu.l2b6_sio_data[14] );

/*   0in custom
      -fire (($0in_rising_edge(l2b6_sio_ctag_vld)) && (l2b6_sio_data[16] == 1) && !(rdd_l6_p5 == l2b6_sio_data[30]))
      -clock l2clk
      -message "ctag error for rdd in l2_sio:  p5 does not equal c5"
      -module cpu  -reset `TB_RST
      -name l2_sio_l6_ctag_ecc_rdd_p5
*/

wire rdd_l7_p0 =  (`TOP.cpu.l2b7_sio_data[0] ^ `TOP.cpu.l2b7_sio_data[1] ^ `TOP.cpu.l2b7_sio_data[3] ^ `TOP.cpu.l2b7_sio_data[4] ^ `TOP.cpu.l2b7_sio_data[6] ^ `TOP.cpu.l2b7_sio_data[8] ^ `TOP.cpu.l2b7_sio_data[10] ^ `TOP.cpu.l2b7_sio_data[11] ^ `TOP.cpu.l2b7_sio_data[13] ^ `TOP.cpu.l2b7_sio_data[15] );

/*   0in custom
      -fire (($0in_rising_edge(l2b7_sio_ctag_vld)) && (l2b7_sio_data[16] == 1) && !(rdd_l7_p0 == l2b7_sio_data[25]))
      -clock l2clk
      -message "ctag error for rdd in l2_sio:  p0 does not equal c0"
      -module cpu  -reset `TB_RST
      -name l2_sio_l7_ctag_ecc_rdd_p0
*/

wire rdd_l7_p1 =  (`TOP.cpu.l2b7_sio_data[0] ^ `TOP.cpu.l2b7_sio_data[2] ^ `TOP.cpu.l2b7_sio_data[3] ^ `TOP.cpu.l2b7_sio_data[5] ^ `TOP.cpu.l2b7_sio_data[6] ^ `TOP.cpu.l2b7_sio_data[9] ^ `TOP.cpu.l2b7_sio_data[10] ^ `TOP.cpu.l2b7_sio_data[12] ^ `TOP.cpu.l2b7_sio_data[13] );

/*   0in custom
      -fire (($0in_rising_edge(l2b7_sio_ctag_vld)) && (l2b7_sio_data[16] == 1) && !(rdd_l7_p1 == l2b7_sio_data[26]))
      -clock l2clk
      -message "ctag error for rdd in l2_sio:  p1 does not equal c1"
      -module cpu  -reset `TB_RST
      -name l2_sio_l7_ctag_ecc_rdd_p1
*/

wire rdd_l7_p2 =  (`TOP.cpu.l2b7_sio_data[1] ^ `TOP.cpu.l2b7_sio_data[2] ^ `TOP.cpu.l2b7_sio_data[3] ^ `TOP.cpu.l2b7_sio_data[7] ^ `TOP.cpu.l2b7_sio_data[8] ^ `TOP.cpu.l2b7_sio_data[9] ^ `TOP.cpu.l2b7_sio_data[10] ^ `TOP.cpu.l2b7_sio_data[14] ^ `TOP.cpu.l2b7_sio_data[15] );

/*   0in custom
      -fire (($0in_rising_edge(l2b7_sio_ctag_vld)) && (l2b7_sio_data[16] == 1) && !(rdd_l7_p2 == l2b7_sio_data[27]))
      -clock l2clk
      -message "ctag error for rdd in l2_sio:  p2 does not equal c2"
      -module cpu  -reset `TB_RST
      -name l2_sio_l7_ctag_ecc_rdd_p2
*/

wire rdd_l7_p3 =  (`TOP.cpu.l2b7_sio_data[4] ^ `TOP.cpu.l2b7_sio_data[5] ^ `TOP.cpu.l2b7_sio_data[6] ^ `TOP.cpu.l2b7_sio_data[7] ^ `TOP.cpu.l2b7_sio_data[8] ^ `TOP.cpu.l2b7_sio_data[9] ^ `TOP.cpu.l2b7_sio_data[10] );

/*   0in custom
      -fire (($0in_rising_edge(l2b7_sio_ctag_vld)) && (l2b7_sio_data[16] == 1) && !(rdd_l7_p3 == l2b7_sio_data[28]))
      -clock l2clk
      -message "ctag error for rdd in l2_sio:  p3 does not equal c3"
      -module cpu  -reset `TB_RST
      -name l2_sio_l7_ctag_ecc_rdd_p3
*/

wire rdd_l7_p4 =  (`TOP.cpu.l2b7_sio_data[11] ^ `TOP.cpu.l2b7_sio_data[12] ^ `TOP.cpu.l2b7_sio_data[13] ^ `TOP.cpu.l2b7_sio_data[14] ^ `TOP.cpu.l2b7_sio_data[15] );

/*   0in custom
      -fire (($0in_rising_edge(l2b7_sio_ctag_vld)) && (l2b7_sio_data[16] == 1) && !(rdd_l7_p4 == l2b7_sio_data[29]))
      -clock l2clk
      -message "ctag error for rdd in l2_sio:  p4 does not equal c4"
      -module cpu  -reset `TB_RST
      -name l2_sio_l7_ctag_ecc_rdd_p4
*/

wire rdd_l7_p5 =  (`TOP.cpu.l2b7_sio_data[0] ^ `TOP.cpu.l2b7_sio_data[1] ^ `TOP.cpu.l2b7_sio_data[2] ^ `TOP.cpu.l2b7_sio_data[4] ^ `TOP.cpu.l2b7_sio_data[5] ^ `TOP.cpu.l2b7_sio_data[7] ^ `TOP.cpu.l2b7_sio_data[10] ^ `TOP.cpu.l2b7_sio_data[11] ^ `TOP.cpu.l2b7_sio_data[12] ^ `TOP.cpu.l2b7_sio_data[14] );

/*   0in custom
      -fire (($0in_rising_edge(l2b7_sio_ctag_vld)) && (l2b7_sio_data[16] == 1) && !(rdd_l7_p5 == l2b7_sio_data[30]))
      -clock l2clk
      -message "ctag error for rdd in l2_sio:  p5 does not equal c5"
      -module cpu  -reset `TB_RST
      -name l2_sio_l7_ctag_ecc_rdd_p5
*/

wire wr_l0_p0 =  (`TOP.cpu.l2b0_sio_data[0] ^ `TOP.cpu.l2b0_sio_data[1] ^ `TOP.cpu.l2b0_sio_data[3] ^ `TOP.cpu.l2b0_sio_data[4] ^ `TOP.cpu.l2b0_sio_data[6] ^ `TOP.cpu.l2b0_sio_data[8] ^ `TOP.cpu.l2b0_sio_data[10] ^ `TOP.cpu.l2b0_sio_data[11] ^ `TOP.cpu.l2b0_sio_data[13] ^ `TOP.cpu.l2b0_sio_data[15] );

/*   0in custom
      -fire (($0in_rising_edge(l2b0_sio_ctag_vld)) && (l2b0_sio_data[16] == 0) && !(wr_l0_p0 == l2b0_sio_data[25]))
      -clock l2clk
      -message "ctag error for write in l2_sio:  p0 does not equal c0"
      -module cpu  -reset `TB_RST
      -name l2_sio_l0_ctag_ecc_wr_p0
*/

wire wr_l0_p1 =  (`TOP.cpu.l2b0_sio_data[0] ^ `TOP.cpu.l2b0_sio_data[2] ^ `TOP.cpu.l2b0_sio_data[3] ^ `TOP.cpu.l2b0_sio_data[5] ^ `TOP.cpu.l2b0_sio_data[6] ^ `TOP.cpu.l2b0_sio_data[9] ^ `TOP.cpu.l2b0_sio_data[10] ^ `TOP.cpu.l2b0_sio_data[12] ^ `TOP.cpu.l2b0_sio_data[13] );

/*   0in custom
      -fire (($0in_rising_edge(l2b0_sio_ctag_vld)) && (l2b0_sio_data[16] == 0) && !(wr_l0_p1 == l2b0_sio_data[26]))
      -clock l2clk
      -message "ctag error for write in l2_sio:  p1 does not equal c1"
      -module cpu  -reset `TB_RST
      -name l2_sio_l0_ctag_ecc_wr_p1
*/

wire wr_l0_p2 =  (`TOP.cpu.l2b0_sio_data[1] ^ `TOP.cpu.l2b0_sio_data[2] ^ `TOP.cpu.l2b0_sio_data[3] ^ `TOP.cpu.l2b0_sio_data[7] ^ `TOP.cpu.l2b0_sio_data[8] ^ `TOP.cpu.l2b0_sio_data[9] ^ `TOP.cpu.l2b0_sio_data[10] ^ `TOP.cpu.l2b0_sio_data[14] ^ `TOP.cpu.l2b0_sio_data[15] );

/*   0in custom
      -fire (($0in_rising_edge(l2b0_sio_ctag_vld)) && (l2b0_sio_data[16] == 0) && !(wr_l0_p2 == l2b0_sio_data[27]))
      -clock l2clk
      -message "ctag error for write in l2_sio:  p2 does not equal c2"
      -module cpu  -reset `TB_RST
      -name l2_sio_l0_ctag_ecc_wr_p2
*/

wire wr_l0_p3 =  (`TOP.cpu.l2b0_sio_data[4] ^ `TOP.cpu.l2b0_sio_data[5] ^ `TOP.cpu.l2b0_sio_data[6] ^ `TOP.cpu.l2b0_sio_data[7] ^ `TOP.cpu.l2b0_sio_data[8] ^ `TOP.cpu.l2b0_sio_data[9] ^ `TOP.cpu.l2b0_sio_data[10] );

/*   0in custom
      -fire (($0in_rising_edge(l2b0_sio_ctag_vld)) && (l2b0_sio_data[16] == 0) && !(wr_l0_p3 == l2b0_sio_data[28]))
      -clock l2clk
      -message "ctag error for write in l2_sio:  p3 does not equal c3"
      -module cpu  -reset `TB_RST
      -name l2_sio_l0_ctag_ecc_wr_p3
*/

wire wr_l0_p4 =  (`TOP.cpu.l2b0_sio_data[11] ^ `TOP.cpu.l2b0_sio_data[12] ^ `TOP.cpu.l2b0_sio_data[13] ^ `TOP.cpu.l2b0_sio_data[14] ^ `TOP.cpu.l2b0_sio_data[15] );

/*   0in custom
      -fire (($0in_rising_edge(l2b0_sio_ctag_vld)) && (l2b0_sio_data[16] == 0) && !(wr_l0_p4 == l2b0_sio_data[29]))
      -clock l2clk
      -message "ctag error for write in l2_sio:  p4 does not equal c4"
      -module cpu  -reset `TB_RST
      -name l2_sio_l0_ctag_ecc_wr_p4
*/

wire wr_l0_p5 =  (`TOP.cpu.l2b0_sio_data[0] ^ `TOP.cpu.l2b0_sio_data[1] ^ `TOP.cpu.l2b0_sio_data[2] ^ `TOP.cpu.l2b0_sio_data[4] ^ `TOP.cpu.l2b0_sio_data[5] ^ `TOP.cpu.l2b0_sio_data[7] ^ `TOP.cpu.l2b0_sio_data[10] ^ `TOP.cpu.l2b0_sio_data[11] ^ `TOP.cpu.l2b0_sio_data[12] ^ `TOP.cpu.l2b0_sio_data[14] );

/*   0in custom
      -fire (($0in_rising_edge(l2b0_sio_ctag_vld)) && (l2b0_sio_data[16] == 0) && !(wr_l0_p5 == l2b0_sio_data[30]))
      -clock l2clk
      -message "ctag error for write in l2_sio:  p5 does not equal c5"
      -module cpu  -reset `TB_RST
      -name l2_sio_l0_ctag_ecc_wr_p5
*/

wire wr_l1_p0 =  (`TOP.cpu.l2b1_sio_data[0] ^ `TOP.cpu.l2b1_sio_data[1] ^ `TOP.cpu.l2b1_sio_data[3] ^ `TOP.cpu.l2b1_sio_data[4] ^ `TOP.cpu.l2b1_sio_data[6] ^ `TOP.cpu.l2b1_sio_data[8] ^ `TOP.cpu.l2b1_sio_data[10] ^ `TOP.cpu.l2b1_sio_data[11] ^ `TOP.cpu.l2b1_sio_data[13] ^ `TOP.cpu.l2b1_sio_data[15] );

/*   0in custom
      -fire (($0in_rising_edge(l2b1_sio_ctag_vld)) && (l2b1_sio_data[16] == 0) && !(wr_l1_p0 == l2b1_sio_data[25]))
      -clock l2clk
      -message "ctag error for write in l2_sio:  p0 does not equal c0"
      -module cpu  -reset `TB_RST
      -name l2_sio_l1_ctag_ecc_wr_p0
*/

wire wr_l1_p1 =  (`TOP.cpu.l2b1_sio_data[0] ^ `TOP.cpu.l2b1_sio_data[2] ^ `TOP.cpu.l2b1_sio_data[3] ^ `TOP.cpu.l2b1_sio_data[5] ^ `TOP.cpu.l2b1_sio_data[6] ^ `TOP.cpu.l2b1_sio_data[9] ^ `TOP.cpu.l2b1_sio_data[10] ^ `TOP.cpu.l2b1_sio_data[12] ^ `TOP.cpu.l2b1_sio_data[13] );

/*   0in custom
      -fire (($0in_rising_edge(l2b1_sio_ctag_vld)) && (l2b1_sio_data[16] == 0) && !(wr_l1_p1 == l2b1_sio_data[26]))
      -clock l2clk
      -message "ctag error for write in l2_sio:  p1 does not equal c1"
      -module cpu  -reset `TB_RST
      -name l2_sio_l1_ctag_ecc_wr_p1
*/

wire wr_l1_p2 =  (`TOP.cpu.l2b1_sio_data[1] ^ `TOP.cpu.l2b1_sio_data[2] ^ `TOP.cpu.l2b1_sio_data[3] ^ `TOP.cpu.l2b1_sio_data[7] ^ `TOP.cpu.l2b1_sio_data[8] ^ `TOP.cpu.l2b1_sio_data[9] ^ `TOP.cpu.l2b1_sio_data[10] ^ `TOP.cpu.l2b1_sio_data[14] ^ `TOP.cpu.l2b1_sio_data[15] );

/*   0in custom
      -fire (($0in_rising_edge(l2b1_sio_ctag_vld)) && (l2b1_sio_data[16] == 0) && !(wr_l1_p2 == l2b1_sio_data[27]))
      -clock l2clk
      -message "ctag error for write in l2_sio:  p2 does not equal c2"
      -module cpu  -reset `TB_RST
      -name l2_sio_l1_ctag_ecc_wr_p2
*/

wire wr_l1_p3 =  (`TOP.cpu.l2b1_sio_data[4] ^ `TOP.cpu.l2b1_sio_data[5] ^ `TOP.cpu.l2b1_sio_data[6] ^ `TOP.cpu.l2b1_sio_data[7] ^ `TOP.cpu.l2b1_sio_data[8] ^ `TOP.cpu.l2b1_sio_data[9] ^ `TOP.cpu.l2b1_sio_data[10] );

/*   0in custom
      -fire (($0in_rising_edge(l2b1_sio_ctag_vld)) && (l2b1_sio_data[16] == 0) && !(wr_l1_p3 == l2b1_sio_data[28]))
      -clock l2clk
      -message "ctag error for write in l2_sio:  p3 does not equal c3"
      -module cpu  -reset `TB_RST
      -name l2_sio_l1_ctag_ecc_wr_p3
*/

wire wr_l1_p4 =  (`TOP.cpu.l2b1_sio_data[11] ^ `TOP.cpu.l2b1_sio_data[12] ^ `TOP.cpu.l2b1_sio_data[13] ^ `TOP.cpu.l2b1_sio_data[14] ^ `TOP.cpu.l2b1_sio_data[15] );

/*   0in custom
      -fire (($0in_rising_edge(l2b1_sio_ctag_vld)) && (l2b1_sio_data[16] == 0) && !(wr_l1_p4 == l2b1_sio_data[29]))
      -clock l2clk
      -message "ctag error for write in l2_sio:  p4 does not equal c4"
      -module cpu  -reset `TB_RST
      -name l2_sio_l1_ctag_ecc_wr_p4
*/

wire wr_l1_p5 =  (`TOP.cpu.l2b1_sio_data[0] ^ `TOP.cpu.l2b1_sio_data[1] ^ `TOP.cpu.l2b1_sio_data[2] ^ `TOP.cpu.l2b1_sio_data[4] ^ `TOP.cpu.l2b1_sio_data[5] ^ `TOP.cpu.l2b1_sio_data[7] ^ `TOP.cpu.l2b1_sio_data[10] ^ `TOP.cpu.l2b1_sio_data[11] ^ `TOP.cpu.l2b1_sio_data[12] ^ `TOP.cpu.l2b1_sio_data[14] );

/*   0in custom
      -fire (($0in_rising_edge(l2b1_sio_ctag_vld)) && (l2b1_sio_data[16] == 0) && !(wr_l1_p5 == l2b1_sio_data[30]))
      -clock l2clk
      -message "ctag error for write in l2_sio:  p5 does not equal c5"
      -module cpu  -reset `TB_RST
      -name l2_sio_l1_ctag_ecc_wr_p5
*/

wire wr_l2_p0 =  (`TOP.cpu.l2b2_sio_data[0] ^ `TOP.cpu.l2b2_sio_data[1] ^ `TOP.cpu.l2b2_sio_data[3] ^ `TOP.cpu.l2b2_sio_data[4] ^ `TOP.cpu.l2b2_sio_data[6] ^ `TOP.cpu.l2b2_sio_data[8] ^ `TOP.cpu.l2b2_sio_data[10] ^ `TOP.cpu.l2b2_sio_data[11] ^ `TOP.cpu.l2b2_sio_data[13] ^ `TOP.cpu.l2b2_sio_data[15] );

/*   0in custom
      -fire (($0in_rising_edge(l2b2_sio_ctag_vld)) && (l2b2_sio_data[16] == 0) && !(wr_l2_p0 == l2b2_sio_data[25]))
      -clock l2clk
      -message "ctag error for write in l2_sio:  p0 does not equal c0"
      -module cpu  -reset `TB_RST
      -name l2_sio_l2_ctag_ecc_wr_p0
*/

wire wr_l2_p1 =  (`TOP.cpu.l2b2_sio_data[0] ^ `TOP.cpu.l2b2_sio_data[2] ^ `TOP.cpu.l2b2_sio_data[3] ^ `TOP.cpu.l2b2_sio_data[5] ^ `TOP.cpu.l2b2_sio_data[6] ^ `TOP.cpu.l2b2_sio_data[9] ^ `TOP.cpu.l2b2_sio_data[10] ^ `TOP.cpu.l2b2_sio_data[12] ^ `TOP.cpu.l2b2_sio_data[13] );

/*   0in custom
      -fire (($0in_rising_edge(l2b2_sio_ctag_vld)) && (l2b2_sio_data[16] == 0) && !(wr_l2_p1 == l2b2_sio_data[26]))
      -clock l2clk
      -message "ctag error for write in l2_sio:  p1 does not equal c1"
      -module cpu  -reset `TB_RST
      -name l2_sio_l2_ctag_ecc_wr_p1
*/

wire wr_l2_p2 =  (`TOP.cpu.l2b2_sio_data[1] ^ `TOP.cpu.l2b2_sio_data[2] ^ `TOP.cpu.l2b2_sio_data[3] ^ `TOP.cpu.l2b2_sio_data[7] ^ `TOP.cpu.l2b2_sio_data[8] ^ `TOP.cpu.l2b2_sio_data[9] ^ `TOP.cpu.l2b2_sio_data[10] ^ `TOP.cpu.l2b2_sio_data[14] ^ `TOP.cpu.l2b2_sio_data[15] );

/*   0in custom
      -fire (($0in_rising_edge(l2b2_sio_ctag_vld)) && (l2b2_sio_data[16] == 0) && !(wr_l2_p2 == l2b2_sio_data[27]))
      -clock l2clk
      -message "ctag error for write in l2_sio:  p2 does not equal c2"
      -module cpu  -reset `TB_RST
      -name l2_sio_l2_ctag_ecc_wr_p2
*/

wire wr_l2_p3 =  (`TOP.cpu.l2b2_sio_data[4] ^ `TOP.cpu.l2b2_sio_data[5] ^ `TOP.cpu.l2b2_sio_data[6] ^ `TOP.cpu.l2b2_sio_data[7] ^ `TOP.cpu.l2b2_sio_data[8] ^ `TOP.cpu.l2b2_sio_data[9] ^ `TOP.cpu.l2b2_sio_data[10] );

/*   0in custom
      -fire (($0in_rising_edge(l2b2_sio_ctag_vld)) && (l2b2_sio_data[16] == 0) && !(wr_l2_p3 == l2b2_sio_data[28]))
      -clock l2clk
      -message "ctag error for write in l2_sio:  p3 does not equal c3"
      -module cpu  -reset `TB_RST
      -name l2_sio_l2_ctag_ecc_wr_p3
*/

wire wr_l2_p4 =  (`TOP.cpu.l2b2_sio_data[11] ^ `TOP.cpu.l2b2_sio_data[12] ^ `TOP.cpu.l2b2_sio_data[13] ^ `TOP.cpu.l2b2_sio_data[14] ^ `TOP.cpu.l2b2_sio_data[15] );

/*   0in custom
      -fire (($0in_rising_edge(l2b2_sio_ctag_vld)) && (l2b2_sio_data[16] == 0) && !(wr_l2_p4 == l2b2_sio_data[29]))
      -clock l2clk
      -message "ctag error for write in l2_sio:  p4 does not equal c4"
      -module cpu  -reset `TB_RST
      -name l2_sio_l2_ctag_ecc_wr_p4
*/

wire wr_l2_p5 =  (`TOP.cpu.l2b2_sio_data[0] ^ `TOP.cpu.l2b2_sio_data[1] ^ `TOP.cpu.l2b2_sio_data[2] ^ `TOP.cpu.l2b2_sio_data[4] ^ `TOP.cpu.l2b2_sio_data[5] ^ `TOP.cpu.l2b2_sio_data[7] ^ `TOP.cpu.l2b2_sio_data[10] ^ `TOP.cpu.l2b2_sio_data[11] ^ `TOP.cpu.l2b2_sio_data[12] ^ `TOP.cpu.l2b2_sio_data[14] );

/*   0in custom
      -fire (($0in_rising_edge(l2b2_sio_ctag_vld)) && (l2b2_sio_data[16] == 0) && !(wr_l2_p5 == l2b2_sio_data[30]))
      -clock l2clk
      -message "ctag error for write in l2_sio:  p5 does not equal c5"
      -module cpu  -reset `TB_RST
      -name l2_sio_l2_ctag_ecc_wr_p5
*/

wire wr_l3_p0 =  (`TOP.cpu.l2b3_sio_data[0] ^ `TOP.cpu.l2b3_sio_data[1] ^ `TOP.cpu.l2b3_sio_data[3] ^ `TOP.cpu.l2b3_sio_data[4] ^ `TOP.cpu.l2b3_sio_data[6] ^ `TOP.cpu.l2b3_sio_data[8] ^ `TOP.cpu.l2b3_sio_data[10] ^ `TOP.cpu.l2b3_sio_data[11] ^ `TOP.cpu.l2b3_sio_data[13] ^ `TOP.cpu.l2b3_sio_data[15] );

/*   0in custom
      -fire (($0in_rising_edge(l2b3_sio_ctag_vld)) && (l2b3_sio_data[16] == 0) && !(wr_l3_p0 == l2b3_sio_data[25]))
      -clock l2clk
      -message "ctag error for write in l2_sio:  p0 does not equal c0"
      -module cpu  -reset `TB_RST
      -name l2_sio_l3_ctag_ecc_wr_p0
*/

wire wr_l3_p1 =  (`TOP.cpu.l2b3_sio_data[0] ^ `TOP.cpu.l2b3_sio_data[2] ^ `TOP.cpu.l2b3_sio_data[3] ^ `TOP.cpu.l2b3_sio_data[5] ^ `TOP.cpu.l2b3_sio_data[6] ^ `TOP.cpu.l2b3_sio_data[9] ^ `TOP.cpu.l2b3_sio_data[10] ^ `TOP.cpu.l2b3_sio_data[12] ^ `TOP.cpu.l2b3_sio_data[13] );

/*   0in custom
      -fire (($0in_rising_edge(l2b3_sio_ctag_vld)) && (l2b3_sio_data[16] == 0) && !(wr_l3_p1 == l2b3_sio_data[26]))
      -clock l2clk
      -message "ctag error for write in l2_sio:  p1 does not equal c1"
      -module cpu  -reset `TB_RST
      -name l2_sio_l3_ctag_ecc_wr_p1
*/

wire wr_l3_p2 =  (`TOP.cpu.l2b3_sio_data[1] ^ `TOP.cpu.l2b3_sio_data[2] ^ `TOP.cpu.l2b3_sio_data[3] ^ `TOP.cpu.l2b3_sio_data[7] ^ `TOP.cpu.l2b3_sio_data[8] ^ `TOP.cpu.l2b3_sio_data[9] ^ `TOP.cpu.l2b3_sio_data[10] ^ `TOP.cpu.l2b3_sio_data[14] ^ `TOP.cpu.l2b3_sio_data[15] );

/*   0in custom
      -fire (($0in_rising_edge(l2b3_sio_ctag_vld)) && (l2b3_sio_data[16] == 0) && !(wr_l3_p2 == l2b3_sio_data[27]))
      -clock l2clk
      -message "ctag error for write in l2_sio:  p2 does not equal c2"
      -module cpu  -reset `TB_RST
      -name l2_sio_l3_ctag_ecc_wr_p2
*/

wire wr_l3_p3 =  (`TOP.cpu.l2b3_sio_data[4] ^ `TOP.cpu.l2b3_sio_data[5] ^ `TOP.cpu.l2b3_sio_data[6] ^ `TOP.cpu.l2b3_sio_data[7] ^ `TOP.cpu.l2b3_sio_data[8] ^ `TOP.cpu.l2b3_sio_data[9] ^ `TOP.cpu.l2b3_sio_data[10] );

/*   0in custom
      -fire (($0in_rising_edge(l2b3_sio_ctag_vld)) && (l2b3_sio_data[16] == 0) && !(wr_l3_p3 == l2b3_sio_data[28]))
      -clock l2clk
      -message "ctag error for write in l2_sio:  p3 does not equal c3"
      -module cpu  -reset `TB_RST
      -name l2_sio_l3_ctag_ecc_wr_p3
*/

wire wr_l3_p4 =  (`TOP.cpu.l2b3_sio_data[11] ^ `TOP.cpu.l2b3_sio_data[12] ^ `TOP.cpu.l2b3_sio_data[13] ^ `TOP.cpu.l2b3_sio_data[14] ^ `TOP.cpu.l2b3_sio_data[15] );

/*   0in custom
      -fire (($0in_rising_edge(l2b3_sio_ctag_vld)) && (l2b3_sio_data[16] == 0) && !(wr_l3_p4 == l2b3_sio_data[29]))
      -clock l2clk
      -message "ctag error for write in l2_sio:  p4 does not equal c4"
      -module cpu  -reset `TB_RST
      -name l2_sio_l3_ctag_ecc_wr_p4
*/

wire wr_l3_p5 =  (`TOP.cpu.l2b3_sio_data[0] ^ `TOP.cpu.l2b3_sio_data[1] ^ `TOP.cpu.l2b3_sio_data[2] ^ `TOP.cpu.l2b3_sio_data[4] ^ `TOP.cpu.l2b3_sio_data[5] ^ `TOP.cpu.l2b3_sio_data[7] ^ `TOP.cpu.l2b3_sio_data[10] ^ `TOP.cpu.l2b3_sio_data[11] ^ `TOP.cpu.l2b3_sio_data[12] ^ `TOP.cpu.l2b3_sio_data[14] );

/*   0in custom
      -fire (($0in_rising_edge(l2b3_sio_ctag_vld)) && (l2b3_sio_data[16] == 0) && !(wr_l3_p5 == l2b3_sio_data[30]))
      -clock l2clk
      -message "ctag error for write in l2_sio:  p5 does not equal c5"
      -module cpu  -reset `TB_RST
      -name l2_sio_l3_ctag_ecc_wr_p5
*/

wire wr_l4_p0 =  (`TOP.cpu.l2b4_sio_data[0] ^ `TOP.cpu.l2b4_sio_data[1] ^ `TOP.cpu.l2b4_sio_data[3] ^ `TOP.cpu.l2b4_sio_data[4] ^ `TOP.cpu.l2b4_sio_data[6] ^ `TOP.cpu.l2b4_sio_data[8] ^ `TOP.cpu.l2b4_sio_data[10] ^ `TOP.cpu.l2b4_sio_data[11] ^ `TOP.cpu.l2b4_sio_data[13] ^ `TOP.cpu.l2b4_sio_data[15] );

/*   0in custom
      -fire (($0in_rising_edge(l2b4_sio_ctag_vld)) && (l2b4_sio_data[16] == 0) && !(wr_l4_p0 == l2b4_sio_data[25]))
      -clock l2clk
      -message "ctag error for write in l2_sio:  p0 does not equal c0"
      -module cpu  -reset `TB_RST
      -name l2_sio_l4_ctag_ecc_wr_p0
*/

wire wr_l4_p1 =  (`TOP.cpu.l2b4_sio_data[0] ^ `TOP.cpu.l2b4_sio_data[2] ^ `TOP.cpu.l2b4_sio_data[3] ^ `TOP.cpu.l2b4_sio_data[5] ^ `TOP.cpu.l2b4_sio_data[6] ^ `TOP.cpu.l2b4_sio_data[9] ^ `TOP.cpu.l2b4_sio_data[10] ^ `TOP.cpu.l2b4_sio_data[12] ^ `TOP.cpu.l2b4_sio_data[13] );

/*   0in custom
      -fire (($0in_rising_edge(l2b4_sio_ctag_vld)) && (l2b4_sio_data[16] == 0) && !(wr_l4_p1 == l2b4_sio_data[26]))
      -clock l2clk
      -message "ctag error for write in l2_sio:  p1 does not equal c1"
      -module cpu  -reset `TB_RST
      -name l2_sio_l4_ctag_ecc_wr_p1
*/

wire wr_l4_p2 =  (`TOP.cpu.l2b4_sio_data[1] ^ `TOP.cpu.l2b4_sio_data[2] ^ `TOP.cpu.l2b4_sio_data[3] ^ `TOP.cpu.l2b4_sio_data[7] ^ `TOP.cpu.l2b4_sio_data[8] ^ `TOP.cpu.l2b4_sio_data[9] ^ `TOP.cpu.l2b4_sio_data[10] ^ `TOP.cpu.l2b4_sio_data[14] ^ `TOP.cpu.l2b4_sio_data[15] );

/*   0in custom
      -fire (($0in_rising_edge(l2b4_sio_ctag_vld)) && (l2b4_sio_data[16] == 0) && !(wr_l4_p2 == l2b4_sio_data[27]))
      -clock l2clk
      -message "ctag error for write in l2_sio:  p2 does not equal c2"
      -module cpu  -reset `TB_RST
      -name l2_sio_l4_ctag_ecc_wr_p2
*/

wire wr_l4_p3 =  (`TOP.cpu.l2b4_sio_data[4] ^ `TOP.cpu.l2b4_sio_data[5] ^ `TOP.cpu.l2b4_sio_data[6] ^ `TOP.cpu.l2b4_sio_data[7] ^ `TOP.cpu.l2b4_sio_data[8] ^ `TOP.cpu.l2b4_sio_data[9] ^ `TOP.cpu.l2b4_sio_data[10] );

/*   0in custom
      -fire (($0in_rising_edge(l2b4_sio_ctag_vld)) && (l2b4_sio_data[16] == 0) && !(wr_l4_p3 == l2b4_sio_data[28]))
      -clock l2clk
      -message "ctag error for write in l2_sio:  p3 does not equal c3"
      -module cpu  -reset `TB_RST
      -name l2_sio_l4_ctag_ecc_wr_p3
*/

wire wr_l4_p4 =  (`TOP.cpu.l2b4_sio_data[11] ^ `TOP.cpu.l2b4_sio_data[12] ^ `TOP.cpu.l2b4_sio_data[13] ^ `TOP.cpu.l2b4_sio_data[14] ^ `TOP.cpu.l2b4_sio_data[15] );

/*   0in custom
      -fire (($0in_rising_edge(l2b4_sio_ctag_vld)) && (l2b4_sio_data[16] == 0) && !(wr_l4_p4 == l2b4_sio_data[29]))
      -clock l2clk
      -message "ctag error for write in l2_sio:  p4 does not equal c4"
      -module cpu  -reset `TB_RST
      -name l2_sio_l4_ctag_ecc_wr_p4
*/

wire wr_l4_p5 =  (`TOP.cpu.l2b4_sio_data[0] ^ `TOP.cpu.l2b4_sio_data[1] ^ `TOP.cpu.l2b4_sio_data[2] ^ `TOP.cpu.l2b4_sio_data[4] ^ `TOP.cpu.l2b4_sio_data[5] ^ `TOP.cpu.l2b4_sio_data[7] ^ `TOP.cpu.l2b4_sio_data[10] ^ `TOP.cpu.l2b4_sio_data[11] ^ `TOP.cpu.l2b4_sio_data[12] ^ `TOP.cpu.l2b4_sio_data[14] );

/*   0in custom
      -fire (($0in_rising_edge(l2b4_sio_ctag_vld)) && (l2b4_sio_data[16] == 0) && !(wr_l4_p5 == l2b4_sio_data[30]))
      -clock l2clk
      -message "ctag error for write in l2_sio:  p5 does not equal c5"
      -module cpu  -reset `TB_RST
      -name l2_sio_l4_ctag_ecc_wr_p5
*/

wire wr_l5_p0 =  (`TOP.cpu.l2b5_sio_data[0] ^ `TOP.cpu.l2b5_sio_data[1] ^ `TOP.cpu.l2b5_sio_data[3] ^ `TOP.cpu.l2b5_sio_data[4] ^ `TOP.cpu.l2b5_sio_data[6] ^ `TOP.cpu.l2b5_sio_data[8] ^ `TOP.cpu.l2b5_sio_data[10] ^ `TOP.cpu.l2b5_sio_data[11] ^ `TOP.cpu.l2b5_sio_data[13] ^ `TOP.cpu.l2b5_sio_data[15] );

/*   0in custom
      -fire (($0in_rising_edge(l2b5_sio_ctag_vld)) && (l2b5_sio_data[16] == 0) && !(wr_l5_p0 == l2b5_sio_data[25]))
      -clock l2clk
      -message "ctag error for write in l2_sio:  p0 does not equal c0"
      -module cpu  -reset `TB_RST
      -name l2_sio_l5_ctag_ecc_wr_p0
*/

wire wr_l5_p1 =  (`TOP.cpu.l2b5_sio_data[0] ^ `TOP.cpu.l2b5_sio_data[2] ^ `TOP.cpu.l2b5_sio_data[3] ^ `TOP.cpu.l2b5_sio_data[5] ^ `TOP.cpu.l2b5_sio_data[6] ^ `TOP.cpu.l2b5_sio_data[9] ^ `TOP.cpu.l2b5_sio_data[10] ^ `TOP.cpu.l2b5_sio_data[12] ^ `TOP.cpu.l2b5_sio_data[13] );

/*   0in custom
      -fire (($0in_rising_edge(l2b5_sio_ctag_vld)) && (l2b5_sio_data[16] == 0) && !(wr_l5_p1 == l2b5_sio_data[26]))
      -clock l2clk
      -message "ctag error for write in l2_sio:  p1 does not equal c1"
      -module cpu  -reset `TB_RST
      -name l2_sio_l5_ctag_ecc_wr_p1
*/

wire wr_l5_p2 =  (`TOP.cpu.l2b5_sio_data[1] ^ `TOP.cpu.l2b5_sio_data[2] ^ `TOP.cpu.l2b5_sio_data[3] ^ `TOP.cpu.l2b5_sio_data[7] ^ `TOP.cpu.l2b5_sio_data[8] ^ `TOP.cpu.l2b5_sio_data[9] ^ `TOP.cpu.l2b5_sio_data[10] ^ `TOP.cpu.l2b5_sio_data[14] ^ `TOP.cpu.l2b5_sio_data[15] );

/*   0in custom
      -fire (($0in_rising_edge(l2b5_sio_ctag_vld)) && (l2b5_sio_data[16] == 0) && !(wr_l5_p2 == l2b5_sio_data[27]))
      -clock l2clk
      -message "ctag error for write in l2_sio:  p2 does not equal c2"
      -module cpu  -reset `TB_RST
      -name l2_sio_l5_ctag_ecc_wr_p2
*/

wire wr_l5_p3 =  (`TOP.cpu.l2b5_sio_data[4] ^ `TOP.cpu.l2b5_sio_data[5] ^ `TOP.cpu.l2b5_sio_data[6] ^ `TOP.cpu.l2b5_sio_data[7] ^ `TOP.cpu.l2b5_sio_data[8] ^ `TOP.cpu.l2b5_sio_data[9] ^ `TOP.cpu.l2b5_sio_data[10] );

/*   0in custom
      -fire (($0in_rising_edge(l2b5_sio_ctag_vld)) && (l2b5_sio_data[16] == 0) && !(wr_l5_p3 == l2b5_sio_data[28]))
      -clock l2clk
      -message "ctag error for write in l2_sio:  p3 does not equal c3"
      -module cpu  -reset `TB_RST
      -name l2_sio_l5_ctag_ecc_wr_p3
*/

wire wr_l5_p4 =  (`TOP.cpu.l2b5_sio_data[11] ^ `TOP.cpu.l2b5_sio_data[12] ^ `TOP.cpu.l2b5_sio_data[13] ^ `TOP.cpu.l2b5_sio_data[14] ^ `TOP.cpu.l2b5_sio_data[15] );

/*   0in custom
      -fire (($0in_rising_edge(l2b5_sio_ctag_vld)) && (l2b5_sio_data[16] == 0) && !(wr_l5_p4 == l2b5_sio_data[29]))
      -clock l2clk
      -message "ctag error for write in l2_sio:  p4 does not equal c4"
      -module cpu  -reset `TB_RST
      -name l2_sio_l5_ctag_ecc_wr_p4
*/

wire wr_l5_p5 =  (`TOP.cpu.l2b5_sio_data[0] ^ `TOP.cpu.l2b5_sio_data[1] ^ `TOP.cpu.l2b5_sio_data[2] ^ `TOP.cpu.l2b5_sio_data[4] ^ `TOP.cpu.l2b5_sio_data[5] ^ `TOP.cpu.l2b5_sio_data[7] ^ `TOP.cpu.l2b5_sio_data[10] ^ `TOP.cpu.l2b5_sio_data[11] ^ `TOP.cpu.l2b5_sio_data[12] ^ `TOP.cpu.l2b5_sio_data[14] );

/*   0in custom
      -fire (($0in_rising_edge(l2b5_sio_ctag_vld)) && (l2b5_sio_data[16] == 0) && !(wr_l5_p5 == l2b5_sio_data[30]))
      -clock l2clk
      -message "ctag error for write in l2_sio:  p5 does not equal c5"
      -module cpu  -reset `TB_RST
      -name l2_sio_l5_ctag_ecc_wr_p5
*/

wire wr_l6_p0 =  (`TOP.cpu.l2b6_sio_data[0] ^ `TOP.cpu.l2b6_sio_data[1] ^ `TOP.cpu.l2b6_sio_data[3] ^ `TOP.cpu.l2b6_sio_data[4] ^ `TOP.cpu.l2b6_sio_data[6] ^ `TOP.cpu.l2b6_sio_data[8] ^ `TOP.cpu.l2b6_sio_data[10] ^ `TOP.cpu.l2b6_sio_data[11] ^ `TOP.cpu.l2b6_sio_data[13] ^ `TOP.cpu.l2b6_sio_data[15] );

/*   0in custom
      -fire (($0in_rising_edge(l2b6_sio_ctag_vld)) && (l2b6_sio_data[16] == 0) && !(wr_l6_p0 == l2b6_sio_data[25]))
      -clock l2clk
      -message "ctag error for write in l2_sio:  p0 does not equal c0"
      -module cpu  -reset `TB_RST
      -name l2_sio_l6_ctag_ecc_wr_p0
*/

wire wr_l6_p1 =  (`TOP.cpu.l2b6_sio_data[0] ^ `TOP.cpu.l2b6_sio_data[2] ^ `TOP.cpu.l2b6_sio_data[3] ^ `TOP.cpu.l2b6_sio_data[5] ^ `TOP.cpu.l2b6_sio_data[6] ^ `TOP.cpu.l2b6_sio_data[9] ^ `TOP.cpu.l2b6_sio_data[10] ^ `TOP.cpu.l2b6_sio_data[12] ^ `TOP.cpu.l2b6_sio_data[13] );

/*   0in custom
      -fire (($0in_rising_edge(l2b6_sio_ctag_vld)) && (l2b6_sio_data[16] == 0) && !(wr_l6_p1 == l2b6_sio_data[26]))
      -clock l2clk
      -message "ctag error for write in l2_sio:  p1 does not equal c1"
      -module cpu  -reset `TB_RST
      -name l2_sio_l6_ctag_ecc_wr_p1
*/

wire wr_l6_p2 =  (`TOP.cpu.l2b6_sio_data[1] ^ `TOP.cpu.l2b6_sio_data[2] ^ `TOP.cpu.l2b6_sio_data[3] ^ `TOP.cpu.l2b6_sio_data[7] ^ `TOP.cpu.l2b6_sio_data[8] ^ `TOP.cpu.l2b6_sio_data[9] ^ `TOP.cpu.l2b6_sio_data[10] ^ `TOP.cpu.l2b6_sio_data[14] ^ `TOP.cpu.l2b6_sio_data[15] );

/*   0in custom
      -fire (($0in_rising_edge(l2b6_sio_ctag_vld)) && (l2b6_sio_data[16] == 0) && !(wr_l6_p2 == l2b6_sio_data[27]))
      -clock l2clk
      -message "ctag error for write in l2_sio:  p2 does not equal c2"
      -module cpu  -reset `TB_RST
      -name l2_sio_l6_ctag_ecc_wr_p2
*/

wire wr_l6_p3 =  (`TOP.cpu.l2b6_sio_data[4] ^ `TOP.cpu.l2b6_sio_data[5] ^ `TOP.cpu.l2b6_sio_data[6] ^ `TOP.cpu.l2b6_sio_data[7] ^ `TOP.cpu.l2b6_sio_data[8] ^ `TOP.cpu.l2b6_sio_data[9] ^ `TOP.cpu.l2b6_sio_data[10] );

/*   0in custom
      -fire (($0in_rising_edge(l2b6_sio_ctag_vld)) && (l2b6_sio_data[16] == 0) && !(wr_l6_p3 == l2b6_sio_data[28]))
      -clock l2clk
      -message "ctag error for write in l2_sio:  p3 does not equal c3"
      -module cpu  -reset `TB_RST
      -name l2_sio_l6_ctag_ecc_wr_p3
*/

wire wr_l6_p4 =  (`TOP.cpu.l2b6_sio_data[11] ^ `TOP.cpu.l2b6_sio_data[12] ^ `TOP.cpu.l2b6_sio_data[13] ^ `TOP.cpu.l2b6_sio_data[14] ^ `TOP.cpu.l2b6_sio_data[15] );

/*   0in custom
      -fire (($0in_rising_edge(l2b6_sio_ctag_vld)) && (l2b6_sio_data[16] == 0) && !(wr_l6_p4 == l2b6_sio_data[29]))
      -clock l2clk
      -message "ctag error for write in l2_sio:  p4 does not equal c4"
      -module cpu  -reset `TB_RST
      -name l2_sio_l6_ctag_ecc_wr_p4
*/

wire wr_l6_p5 =  (`TOP.cpu.l2b6_sio_data[0] ^ `TOP.cpu.l2b6_sio_data[1] ^ `TOP.cpu.l2b6_sio_data[2] ^ `TOP.cpu.l2b6_sio_data[4] ^ `TOP.cpu.l2b6_sio_data[5] ^ `TOP.cpu.l2b6_sio_data[7] ^ `TOP.cpu.l2b6_sio_data[10] ^ `TOP.cpu.l2b6_sio_data[11] ^ `TOP.cpu.l2b6_sio_data[12] ^ `TOP.cpu.l2b6_sio_data[14] );

/*   0in custom
      -fire (($0in_rising_edge(l2b6_sio_ctag_vld)) && (l2b6_sio_data[16] == 0) && !(wr_l6_p5 == l2b6_sio_data[30]))
      -clock l2clk
      -message "ctag error for write in l2_sio:  p5 does not equal c5"
      -module cpu  -reset `TB_RST
      -name l2_sio_l6_ctag_ecc_wr_p5
*/

wire wr_l7_p0 =  (`TOP.cpu.l2b7_sio_data[0] ^ `TOP.cpu.l2b7_sio_data[1] ^ `TOP.cpu.l2b7_sio_data[3] ^ `TOP.cpu.l2b7_sio_data[4] ^ `TOP.cpu.l2b7_sio_data[6] ^ `TOP.cpu.l2b7_sio_data[8] ^ `TOP.cpu.l2b7_sio_data[10] ^ `TOP.cpu.l2b7_sio_data[11] ^ `TOP.cpu.l2b7_sio_data[13] ^ `TOP.cpu.l2b7_sio_data[15] );

/*   0in custom
      -fire (($0in_rising_edge(l2b7_sio_ctag_vld)) && (l2b7_sio_data[16] == 0) && !(wr_l7_p0 == l2b7_sio_data[25]))
      -clock l2clk
      -message "ctag error for write in l2_sio:  p0 does not equal c0"
      -module cpu  -reset `TB_RST
      -name l2_sio_l7_ctag_ecc_wr_p0
*/

wire wr_l7_p1 =  (`TOP.cpu.l2b7_sio_data[0] ^ `TOP.cpu.l2b7_sio_data[2] ^ `TOP.cpu.l2b7_sio_data[3] ^ `TOP.cpu.l2b7_sio_data[5] ^ `TOP.cpu.l2b7_sio_data[6] ^ `TOP.cpu.l2b7_sio_data[9] ^ `TOP.cpu.l2b7_sio_data[10] ^ `TOP.cpu.l2b7_sio_data[12] ^ `TOP.cpu.l2b7_sio_data[13] );

/*   0in custom
      -fire (($0in_rising_edge(l2b7_sio_ctag_vld)) && (l2b7_sio_data[16] == 0) && !(wr_l7_p1 == l2b7_sio_data[26]))
      -clock l2clk
      -message "ctag error for write in l2_sio:  p1 does not equal c1"
      -module cpu  -reset `TB_RST
      -name l2_sio_l7_ctag_ecc_wr_p1
*/

wire wr_l7_p2 =  (`TOP.cpu.l2b7_sio_data[1] ^ `TOP.cpu.l2b7_sio_data[2] ^ `TOP.cpu.l2b7_sio_data[3] ^ `TOP.cpu.l2b7_sio_data[7] ^ `TOP.cpu.l2b7_sio_data[8] ^ `TOP.cpu.l2b7_sio_data[9] ^ `TOP.cpu.l2b7_sio_data[10] ^ `TOP.cpu.l2b7_sio_data[14] ^ `TOP.cpu.l2b7_sio_data[15] );

/*   0in custom
      -fire (($0in_rising_edge(l2b7_sio_ctag_vld)) && (l2b7_sio_data[16] == 0) && !(wr_l7_p2 == l2b7_sio_data[27]))
      -clock l2clk
      -message "ctag error for write in l2_sio:  p2 does not equal c2"
      -module cpu  -reset `TB_RST
      -name l2_sio_l7_ctag_ecc_wr_p2
*/

wire wr_l7_p3 =  (`TOP.cpu.l2b7_sio_data[4] ^ `TOP.cpu.l2b7_sio_data[5] ^ `TOP.cpu.l2b7_sio_data[6] ^ `TOP.cpu.l2b7_sio_data[7] ^ `TOP.cpu.l2b7_sio_data[8] ^ `TOP.cpu.l2b7_sio_data[9] ^ `TOP.cpu.l2b7_sio_data[10] );

/*   0in custom
      -fire (($0in_rising_edge(l2b7_sio_ctag_vld)) && (l2b7_sio_data[16] == 0) && !(wr_l7_p3 == l2b7_sio_data[28]))
      -clock l2clk
      -message "ctag error for write in l2_sio:  p3 does not equal c3"
      -module cpu  -reset `TB_RST
      -name l2_sio_l7_ctag_ecc_wr_p3
*/

wire wr_l7_p4 =  (`TOP.cpu.l2b7_sio_data[11] ^ `TOP.cpu.l2b7_sio_data[12] ^ `TOP.cpu.l2b7_sio_data[13] ^ `TOP.cpu.l2b7_sio_data[14] ^ `TOP.cpu.l2b7_sio_data[15] );

/*   0in custom
      -fire (($0in_rising_edge(l2b7_sio_ctag_vld)) && (l2b7_sio_data[16] == 0) && !(wr_l7_p4 == l2b7_sio_data[29]))
      -clock l2clk
      -message "ctag error for write in l2_sio:  p4 does not equal c4"
      -module cpu  -reset `TB_RST
      -name l2_sio_l7_ctag_ecc_wr_p4
*/

wire wr_l7_p5 =  (`TOP.cpu.l2b7_sio_data[0] ^ `TOP.cpu.l2b7_sio_data[1] ^ `TOP.cpu.l2b7_sio_data[2] ^ `TOP.cpu.l2b7_sio_data[4] ^ `TOP.cpu.l2b7_sio_data[5] ^ `TOP.cpu.l2b7_sio_data[7] ^ `TOP.cpu.l2b7_sio_data[10] ^ `TOP.cpu.l2b7_sio_data[11] ^ `TOP.cpu.l2b7_sio_data[12] ^ `TOP.cpu.l2b7_sio_data[14] );

/*   0in custom
      -fire (($0in_rising_edge(l2b7_sio_ctag_vld)) && (l2b7_sio_data[16] == 0) && !(wr_l7_p5 == l2b7_sio_data[30]))
      -clock l2clk
      -message "ctag error for write in l2_sio:  p5 does not equal c5"
      -module cpu  -reset `TB_RST
      -name l2_sio_l7_ctag_ecc_wr_p5
*/

/*************************************************************************
*
*  Check for data parity  L2 -> SIO
*  For RDD
*
**************************************************************************/


/*   0in odd_parity
      -var {l2b0_sio_data[0],l2b0_sio_data[2],l2b0_sio_data[4],l2b0_sio_data[6],l2b0_sio_data[8],l2b0_sio_data[10],l2b0_sio_data[12],l2b0_sio_data[14],l2b0_sio_data[16],l2b0_sio_data[18],l2b0_sio_data[20],l2b0_sio_data[22],l2b0_sio_data[24],l2b0_sio_data[26],l2b0_sio_data[28],l2b0_sio_data[30] ^ l2b0_sio_parity[0]}
      -active (($0in_rising_edge($0in_delay(l2b0_sio_ctag_vld,1))) && ($0in_delay(l2b0_sio_data[16] == 1,1)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l0_parity_even_cycle1
*/

/*   0in odd_parity
      -var {l2b0_sio_data[0],l2b0_sio_data[2],l2b0_sio_data[4],l2b0_sio_data[6],l2b0_sio_data[8],l2b0_sio_data[10],l2b0_sio_data[12],l2b0_sio_data[14],l2b0_sio_data[16],l2b0_sio_data[18],l2b0_sio_data[20],l2b0_sio_data[22],l2b0_sio_data[24],l2b0_sio_data[26],l2b0_sio_data[28],l2b0_sio_data[30] ^ l2b0_sio_parity[0]}
      -active (($0in_rising_edge($0in_delay(l2b0_sio_ctag_vld,2))) && ($0in_delay(l2b0_sio_data[16] == 1,2)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l0_parity_even_cycle2
*/

/*   0in odd_parity
      -var {l2b0_sio_data[0],l2b0_sio_data[2],l2b0_sio_data[4],l2b0_sio_data[6],l2b0_sio_data[8],l2b0_sio_data[10],l2b0_sio_data[12],l2b0_sio_data[14],l2b0_sio_data[16],l2b0_sio_data[18],l2b0_sio_data[20],l2b0_sio_data[22],l2b0_sio_data[24],l2b0_sio_data[26],l2b0_sio_data[28],l2b0_sio_data[30] ^ l2b0_sio_parity[0]}
      -active (($0in_rising_edge($0in_delay(l2b0_sio_ctag_vld,3))) && ($0in_delay(l2b0_sio_data[16] == 1,3)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l0_parity_even_cycle3
*/

/*   0in odd_parity
      -var {l2b0_sio_data[0],l2b0_sio_data[2],l2b0_sio_data[4],l2b0_sio_data[6],l2b0_sio_data[8],l2b0_sio_data[10],l2b0_sio_data[12],l2b0_sio_data[14],l2b0_sio_data[16],l2b0_sio_data[18],l2b0_sio_data[20],l2b0_sio_data[22],l2b0_sio_data[24],l2b0_sio_data[26],l2b0_sio_data[28],l2b0_sio_data[30] ^ l2b0_sio_parity[0]}
      -active (($0in_rising_edge($0in_delay(l2b0_sio_ctag_vld,4))) && ($0in_delay(l2b0_sio_data[16] == 1,4)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l0_parity_even_cycle4
*/

/*   0in odd_parity
      -var {l2b0_sio_data[0],l2b0_sio_data[2],l2b0_sio_data[4],l2b0_sio_data[6],l2b0_sio_data[8],l2b0_sio_data[10],l2b0_sio_data[12],l2b0_sio_data[14],l2b0_sio_data[16],l2b0_sio_data[18],l2b0_sio_data[20],l2b0_sio_data[22],l2b0_sio_data[24],l2b0_sio_data[26],l2b0_sio_data[28],l2b0_sio_data[30] ^ l2b0_sio_parity[0]}
      -active (($0in_rising_edge($0in_delay(l2b0_sio_ctag_vld,5))) && ($0in_delay(l2b0_sio_data[16] == 1,5)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l0_parity_even_cycle5
*/

/*   0in odd_parity
      -var {l2b0_sio_data[0],l2b0_sio_data[2],l2b0_sio_data[4],l2b0_sio_data[6],l2b0_sio_data[8],l2b0_sio_data[10],l2b0_sio_data[12],l2b0_sio_data[14],l2b0_sio_data[16],l2b0_sio_data[18],l2b0_sio_data[20],l2b0_sio_data[22],l2b0_sio_data[24],l2b0_sio_data[26],l2b0_sio_data[28],l2b0_sio_data[30] ^ l2b0_sio_parity[0]}
      -active (($0in_rising_edge($0in_delay(l2b0_sio_ctag_vld,6))) && ($0in_delay(l2b0_sio_data[16] == 1,6)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l0_parity_even_cycle6
*/

/*   0in odd_parity
      -var {l2b0_sio_data[0],l2b0_sio_data[2],l2b0_sio_data[4],l2b0_sio_data[6],l2b0_sio_data[8],l2b0_sio_data[10],l2b0_sio_data[12],l2b0_sio_data[14],l2b0_sio_data[16],l2b0_sio_data[18],l2b0_sio_data[20],l2b0_sio_data[22],l2b0_sio_data[24],l2b0_sio_data[26],l2b0_sio_data[28],l2b0_sio_data[30] ^ l2b0_sio_parity[0]}
      -active (($0in_rising_edge($0in_delay(l2b0_sio_ctag_vld,7))) && ($0in_delay(l2b0_sio_data[16] == 1,7)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l0_parity_even_cycle7
*/

/*   0in odd_parity
      -var {l2b0_sio_data[0],l2b0_sio_data[2],l2b0_sio_data[4],l2b0_sio_data[6],l2b0_sio_data[8],l2b0_sio_data[10],l2b0_sio_data[12],l2b0_sio_data[14],l2b0_sio_data[16],l2b0_sio_data[18],l2b0_sio_data[20],l2b0_sio_data[22],l2b0_sio_data[24],l2b0_sio_data[26],l2b0_sio_data[28],l2b0_sio_data[30] ^ l2b0_sio_parity[0]}
      -active (($0in_rising_edge($0in_delay(l2b0_sio_ctag_vld,8))) && ($0in_delay(l2b0_sio_data[16] == 1,8)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l0_parity_even_cycle8
*/

/*   0in odd_parity
      -var {l2b0_sio_data[0],l2b0_sio_data[2],l2b0_sio_data[4],l2b0_sio_data[6],l2b0_sio_data[8],l2b0_sio_data[10],l2b0_sio_data[12],l2b0_sio_data[14],l2b0_sio_data[16],l2b0_sio_data[18],l2b0_sio_data[20],l2b0_sio_data[22],l2b0_sio_data[24],l2b0_sio_data[26],l2b0_sio_data[28],l2b0_sio_data[30] ^ l2b0_sio_parity[0]}
      -active (($0in_rising_edge($0in_delay(l2b0_sio_ctag_vld,9))) && ($0in_delay(l2b0_sio_data[16] == 1,9)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l0_parity_even_cycle9
*/

/*   0in odd_parity
      -var {l2b0_sio_data[0],l2b0_sio_data[2],l2b0_sio_data[4],l2b0_sio_data[6],l2b0_sio_data[8],l2b0_sio_data[10],l2b0_sio_data[12],l2b0_sio_data[14],l2b0_sio_data[16],l2b0_sio_data[18],l2b0_sio_data[20],l2b0_sio_data[22],l2b0_sio_data[24],l2b0_sio_data[26],l2b0_sio_data[28],l2b0_sio_data[30] ^ l2b0_sio_parity[0]}
      -active (($0in_rising_edge($0in_delay(l2b0_sio_ctag_vld,10))) && ($0in_delay(l2b0_sio_data[16] == 1,10)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l0_parity_even_cycle10
*/

/*   0in odd_parity
      -var {l2b0_sio_data[0],l2b0_sio_data[2],l2b0_sio_data[4],l2b0_sio_data[6],l2b0_sio_data[8],l2b0_sio_data[10],l2b0_sio_data[12],l2b0_sio_data[14],l2b0_sio_data[16],l2b0_sio_data[18],l2b0_sio_data[20],l2b0_sio_data[22],l2b0_sio_data[24],l2b0_sio_data[26],l2b0_sio_data[28],l2b0_sio_data[30] ^ l2b0_sio_parity[0]}
      -active (($0in_rising_edge($0in_delay(l2b0_sio_ctag_vld,11))) && ($0in_delay(l2b0_sio_data[16] == 1,11)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l0_parity_even_cycle11
*/

/*   0in odd_parity
      -var {l2b0_sio_data[0],l2b0_sio_data[2],l2b0_sio_data[4],l2b0_sio_data[6],l2b0_sio_data[8],l2b0_sio_data[10],l2b0_sio_data[12],l2b0_sio_data[14],l2b0_sio_data[16],l2b0_sio_data[18],l2b0_sio_data[20],l2b0_sio_data[22],l2b0_sio_data[24],l2b0_sio_data[26],l2b0_sio_data[28],l2b0_sio_data[30] ^ l2b0_sio_parity[0]}
      -active (($0in_rising_edge($0in_delay(l2b0_sio_ctag_vld,12))) && ($0in_delay(l2b0_sio_data[16] == 1,12)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l0_parity_even_cycle12
*/

/*   0in odd_parity
      -var {l2b0_sio_data[0],l2b0_sio_data[2],l2b0_sio_data[4],l2b0_sio_data[6],l2b0_sio_data[8],l2b0_sio_data[10],l2b0_sio_data[12],l2b0_sio_data[14],l2b0_sio_data[16],l2b0_sio_data[18],l2b0_sio_data[20],l2b0_sio_data[22],l2b0_sio_data[24],l2b0_sio_data[26],l2b0_sio_data[28],l2b0_sio_data[30] ^ l2b0_sio_parity[0]}
      -active (($0in_rising_edge($0in_delay(l2b0_sio_ctag_vld,13))) && ($0in_delay(l2b0_sio_data[16] == 1,13)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l0_parity_even_cycle13
*/

/*   0in odd_parity
      -var {l2b0_sio_data[0],l2b0_sio_data[2],l2b0_sio_data[4],l2b0_sio_data[6],l2b0_sio_data[8],l2b0_sio_data[10],l2b0_sio_data[12],l2b0_sio_data[14],l2b0_sio_data[16],l2b0_sio_data[18],l2b0_sio_data[20],l2b0_sio_data[22],l2b0_sio_data[24],l2b0_sio_data[26],l2b0_sio_data[28],l2b0_sio_data[30] ^ l2b0_sio_parity[0]}
      -active (($0in_rising_edge($0in_delay(l2b0_sio_ctag_vld,14))) && ($0in_delay(l2b0_sio_data[16] == 1,14)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l0_parity_even_cycle14
*/

/*   0in odd_parity
      -var {l2b0_sio_data[0],l2b0_sio_data[2],l2b0_sio_data[4],l2b0_sio_data[6],l2b0_sio_data[8],l2b0_sio_data[10],l2b0_sio_data[12],l2b0_sio_data[14],l2b0_sio_data[16],l2b0_sio_data[18],l2b0_sio_data[20],l2b0_sio_data[22],l2b0_sio_data[24],l2b0_sio_data[26],l2b0_sio_data[28],l2b0_sio_data[30] ^ l2b0_sio_parity[0]}
      -active (($0in_rising_edge($0in_delay(l2b0_sio_ctag_vld,15))) && ($0in_delay(l2b0_sio_data[16] == 1,15)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l0_parity_even_cycle15
*/

/*   0in odd_parity
      -var {l2b0_sio_data[0],l2b0_sio_data[2],l2b0_sio_data[4],l2b0_sio_data[6],l2b0_sio_data[8],l2b0_sio_data[10],l2b0_sio_data[12],l2b0_sio_data[14],l2b0_sio_data[16],l2b0_sio_data[18],l2b0_sio_data[20],l2b0_sio_data[22],l2b0_sio_data[24],l2b0_sio_data[26],l2b0_sio_data[28],l2b0_sio_data[30] ^ l2b0_sio_parity[0]}
      -active (($0in_rising_edge($0in_delay(l2b0_sio_ctag_vld,16))) && ($0in_delay(l2b0_sio_data[16] == 1,16)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l0_parity_even_cycle16
*/

/*   0in odd_parity
      -var {l2b0_sio_data[1],l2b0_sio_data[3],l2b0_sio_data[5],l2b0_sio_data[7],l2b0_sio_data[9],l2b0_sio_data[11],l2b0_sio_data[13],l2b0_sio_data[15],l2b0_sio_data[17],l2b0_sio_data[19],l2b0_sio_data[21],l2b0_sio_data[23],l2b0_sio_data[25],l2b0_sio_data[27],l2b0_sio_data[29],l2b0_sio_data[31] ^ l2b0_sio_parity[1]}
      -active (($0in_rising_edge($0in_delay(l2b0_sio_ctag_vld,1))) && ($0in_delay(l2b0_sio_data[16] == 1,1)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l0_parity_odd_cycle1
*/

/*   0in odd_parity
      -var {l2b0_sio_data[1],l2b0_sio_data[3],l2b0_sio_data[5],l2b0_sio_data[7],l2b0_sio_data[9],l2b0_sio_data[11],l2b0_sio_data[13],l2b0_sio_data[15],l2b0_sio_data[17],l2b0_sio_data[19],l2b0_sio_data[21],l2b0_sio_data[23],l2b0_sio_data[25],l2b0_sio_data[27],l2b0_sio_data[29],l2b0_sio_data[31] ^ l2b0_sio_parity[1]}
      -active (($0in_rising_edge($0in_delay(l2b0_sio_ctag_vld,2))) && ($0in_delay(l2b0_sio_data[16] == 1,2)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l0_parity_odd_cycle2
*/

/*   0in odd_parity
      -var {l2b0_sio_data[1],l2b0_sio_data[3],l2b0_sio_data[5],l2b0_sio_data[7],l2b0_sio_data[9],l2b0_sio_data[11],l2b0_sio_data[13],l2b0_sio_data[15],l2b0_sio_data[17],l2b0_sio_data[19],l2b0_sio_data[21],l2b0_sio_data[23],l2b0_sio_data[25],l2b0_sio_data[27],l2b0_sio_data[29],l2b0_sio_data[31] ^ l2b0_sio_parity[1]}
      -active (($0in_rising_edge($0in_delay(l2b0_sio_ctag_vld,3))) && ($0in_delay(l2b0_sio_data[16] == 1,3)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l0_parity_odd_cycle3
*/

/*   0in odd_parity
      -var {l2b0_sio_data[1],l2b0_sio_data[3],l2b0_sio_data[5],l2b0_sio_data[7],l2b0_sio_data[9],l2b0_sio_data[11],l2b0_sio_data[13],l2b0_sio_data[15],l2b0_sio_data[17],l2b0_sio_data[19],l2b0_sio_data[21],l2b0_sio_data[23],l2b0_sio_data[25],l2b0_sio_data[27],l2b0_sio_data[29],l2b0_sio_data[31] ^ l2b0_sio_parity[1]}
      -active (($0in_rising_edge($0in_delay(l2b0_sio_ctag_vld,4))) && ($0in_delay(l2b0_sio_data[16] == 1,4)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l0_parity_odd_cycle4
*/

/*   0in odd_parity
      -var {l2b0_sio_data[1],l2b0_sio_data[3],l2b0_sio_data[5],l2b0_sio_data[7],l2b0_sio_data[9],l2b0_sio_data[11],l2b0_sio_data[13],l2b0_sio_data[15],l2b0_sio_data[17],l2b0_sio_data[19],l2b0_sio_data[21],l2b0_sio_data[23],l2b0_sio_data[25],l2b0_sio_data[27],l2b0_sio_data[29],l2b0_sio_data[31] ^ l2b0_sio_parity[1]}
      -active (($0in_rising_edge($0in_delay(l2b0_sio_ctag_vld,5))) && ($0in_delay(l2b0_sio_data[16] == 1,5)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l0_parity_odd_cycle5
*/

/*   0in odd_parity
      -var {l2b0_sio_data[1],l2b0_sio_data[3],l2b0_sio_data[5],l2b0_sio_data[7],l2b0_sio_data[9],l2b0_sio_data[11],l2b0_sio_data[13],l2b0_sio_data[15],l2b0_sio_data[17],l2b0_sio_data[19],l2b0_sio_data[21],l2b0_sio_data[23],l2b0_sio_data[25],l2b0_sio_data[27],l2b0_sio_data[29],l2b0_sio_data[31] ^ l2b0_sio_parity[1]}
      -active (($0in_rising_edge($0in_delay(l2b0_sio_ctag_vld,6))) && ($0in_delay(l2b0_sio_data[16] == 1,6)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l0_parity_odd_cycle6
*/

/*   0in odd_parity
      -var {l2b0_sio_data[1],l2b0_sio_data[3],l2b0_sio_data[5],l2b0_sio_data[7],l2b0_sio_data[9],l2b0_sio_data[11],l2b0_sio_data[13],l2b0_sio_data[15],l2b0_sio_data[17],l2b0_sio_data[19],l2b0_sio_data[21],l2b0_sio_data[23],l2b0_sio_data[25],l2b0_sio_data[27],l2b0_sio_data[29],l2b0_sio_data[31] ^ l2b0_sio_parity[1]}
      -active (($0in_rising_edge($0in_delay(l2b0_sio_ctag_vld,7))) && ($0in_delay(l2b0_sio_data[16] == 1,7)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l0_parity_odd_cycle7
*/

/*   0in odd_parity
      -var {l2b0_sio_data[1],l2b0_sio_data[3],l2b0_sio_data[5],l2b0_sio_data[7],l2b0_sio_data[9],l2b0_sio_data[11],l2b0_sio_data[13],l2b0_sio_data[15],l2b0_sio_data[17],l2b0_sio_data[19],l2b0_sio_data[21],l2b0_sio_data[23],l2b0_sio_data[25],l2b0_sio_data[27],l2b0_sio_data[29],l2b0_sio_data[31] ^ l2b0_sio_parity[1]}
      -active (($0in_rising_edge($0in_delay(l2b0_sio_ctag_vld,8))) && ($0in_delay(l2b0_sio_data[16] == 1,8)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l0_parity_odd_cycle8
*/

/*   0in odd_parity
      -var {l2b0_sio_data[1],l2b0_sio_data[3],l2b0_sio_data[5],l2b0_sio_data[7],l2b0_sio_data[9],l2b0_sio_data[11],l2b0_sio_data[13],l2b0_sio_data[15],l2b0_sio_data[17],l2b0_sio_data[19],l2b0_sio_data[21],l2b0_sio_data[23],l2b0_sio_data[25],l2b0_sio_data[27],l2b0_sio_data[29],l2b0_sio_data[31] ^ l2b0_sio_parity[1]}
      -active (($0in_rising_edge($0in_delay(l2b0_sio_ctag_vld,9))) && ($0in_delay(l2b0_sio_data[16] == 1,9)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l0_parity_odd_cycle9
*/

/*   0in odd_parity
      -var {l2b0_sio_data[1],l2b0_sio_data[3],l2b0_sio_data[5],l2b0_sio_data[7],l2b0_sio_data[9],l2b0_sio_data[11],l2b0_sio_data[13],l2b0_sio_data[15],l2b0_sio_data[17],l2b0_sio_data[19],l2b0_sio_data[21],l2b0_sio_data[23],l2b0_sio_data[25],l2b0_sio_data[27],l2b0_sio_data[29],l2b0_sio_data[31] ^ l2b0_sio_parity[1]}
      -active (($0in_rising_edge($0in_delay(l2b0_sio_ctag_vld,10))) && ($0in_delay(l2b0_sio_data[16] == 1,10)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l0_parity_odd_cycle10
*/

/*   0in odd_parity
      -var {l2b0_sio_data[1],l2b0_sio_data[3],l2b0_sio_data[5],l2b0_sio_data[7],l2b0_sio_data[9],l2b0_sio_data[11],l2b0_sio_data[13],l2b0_sio_data[15],l2b0_sio_data[17],l2b0_sio_data[19],l2b0_sio_data[21],l2b0_sio_data[23],l2b0_sio_data[25],l2b0_sio_data[27],l2b0_sio_data[29],l2b0_sio_data[31] ^ l2b0_sio_parity[1]}
      -active (($0in_rising_edge($0in_delay(l2b0_sio_ctag_vld,11))) && ($0in_delay(l2b0_sio_data[16] == 1,11)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l0_parity_odd_cycle11
*/

/*   0in odd_parity
      -var {l2b0_sio_data[1],l2b0_sio_data[3],l2b0_sio_data[5],l2b0_sio_data[7],l2b0_sio_data[9],l2b0_sio_data[11],l2b0_sio_data[13],l2b0_sio_data[15],l2b0_sio_data[17],l2b0_sio_data[19],l2b0_sio_data[21],l2b0_sio_data[23],l2b0_sio_data[25],l2b0_sio_data[27],l2b0_sio_data[29],l2b0_sio_data[31] ^ l2b0_sio_parity[1]}
      -active (($0in_rising_edge($0in_delay(l2b0_sio_ctag_vld,12))) && ($0in_delay(l2b0_sio_data[16] == 1,12)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l0_parity_odd_cycle12
*/

/*   0in odd_parity
      -var {l2b0_sio_data[1],l2b0_sio_data[3],l2b0_sio_data[5],l2b0_sio_data[7],l2b0_sio_data[9],l2b0_sio_data[11],l2b0_sio_data[13],l2b0_sio_data[15],l2b0_sio_data[17],l2b0_sio_data[19],l2b0_sio_data[21],l2b0_sio_data[23],l2b0_sio_data[25],l2b0_sio_data[27],l2b0_sio_data[29],l2b0_sio_data[31] ^ l2b0_sio_parity[1]}
      -active (($0in_rising_edge($0in_delay(l2b0_sio_ctag_vld,13))) && ($0in_delay(l2b0_sio_data[16] == 1,13)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l0_parity_odd_cycle13
*/

/*   0in odd_parity
      -var {l2b0_sio_data[1],l2b0_sio_data[3],l2b0_sio_data[5],l2b0_sio_data[7],l2b0_sio_data[9],l2b0_sio_data[11],l2b0_sio_data[13],l2b0_sio_data[15],l2b0_sio_data[17],l2b0_sio_data[19],l2b0_sio_data[21],l2b0_sio_data[23],l2b0_sio_data[25],l2b0_sio_data[27],l2b0_sio_data[29],l2b0_sio_data[31] ^ l2b0_sio_parity[1]}
      -active (($0in_rising_edge($0in_delay(l2b0_sio_ctag_vld,14))) && ($0in_delay(l2b0_sio_data[16] == 1,14)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l0_parity_odd_cycle14
*/

/*   0in odd_parity
      -var {l2b0_sio_data[1],l2b0_sio_data[3],l2b0_sio_data[5],l2b0_sio_data[7],l2b0_sio_data[9],l2b0_sio_data[11],l2b0_sio_data[13],l2b0_sio_data[15],l2b0_sio_data[17],l2b0_sio_data[19],l2b0_sio_data[21],l2b0_sio_data[23],l2b0_sio_data[25],l2b0_sio_data[27],l2b0_sio_data[29],l2b0_sio_data[31] ^ l2b0_sio_parity[1]}
      -active (($0in_rising_edge($0in_delay(l2b0_sio_ctag_vld,15))) && ($0in_delay(l2b0_sio_data[16] == 1,15)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l0_parity_odd_cycle15
*/

/*   0in odd_parity
      -var {l2b0_sio_data[1],l2b0_sio_data[3],l2b0_sio_data[5],l2b0_sio_data[7],l2b0_sio_data[9],l2b0_sio_data[11],l2b0_sio_data[13],l2b0_sio_data[15],l2b0_sio_data[17],l2b0_sio_data[19],l2b0_sio_data[21],l2b0_sio_data[23],l2b0_sio_data[25],l2b0_sio_data[27],l2b0_sio_data[29],l2b0_sio_data[31] ^ l2b0_sio_parity[1]}
      -active (($0in_rising_edge($0in_delay(l2b0_sio_ctag_vld,16))) && ($0in_delay(l2b0_sio_data[16] == 1,16)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l0_parity_odd_cycle16
*/

/*   0in odd_parity
      -var {l2b1_sio_data[0],l2b1_sio_data[2],l2b1_sio_data[4],l2b1_sio_data[6],l2b1_sio_data[8],l2b1_sio_data[10],l2b1_sio_data[12],l2b1_sio_data[14],l2b1_sio_data[16],l2b1_sio_data[18],l2b1_sio_data[20],l2b1_sio_data[22],l2b1_sio_data[24],l2b1_sio_data[26],l2b1_sio_data[28],l2b1_sio_data[30] ^ l2b1_sio_parity[0]}
      -active (($0in_rising_edge($0in_delay(l2b1_sio_ctag_vld,1))) && ($0in_delay(l2b1_sio_data[16] == 1,1)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l1_parity_even_cycle1
*/

/*   0in odd_parity
      -var {l2b1_sio_data[0],l2b1_sio_data[2],l2b1_sio_data[4],l2b1_sio_data[6],l2b1_sio_data[8],l2b1_sio_data[10],l2b1_sio_data[12],l2b1_sio_data[14],l2b1_sio_data[16],l2b1_sio_data[18],l2b1_sio_data[20],l2b1_sio_data[22],l2b1_sio_data[24],l2b1_sio_data[26],l2b1_sio_data[28],l2b1_sio_data[30] ^ l2b1_sio_parity[0]}
      -active (($0in_rising_edge($0in_delay(l2b1_sio_ctag_vld,2))) && ($0in_delay(l2b1_sio_data[16] == 1,2)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l1_parity_even_cycle2
*/

/*   0in odd_parity
      -var {l2b1_sio_data[0],l2b1_sio_data[2],l2b1_sio_data[4],l2b1_sio_data[6],l2b1_sio_data[8],l2b1_sio_data[10],l2b1_sio_data[12],l2b1_sio_data[14],l2b1_sio_data[16],l2b1_sio_data[18],l2b1_sio_data[20],l2b1_sio_data[22],l2b1_sio_data[24],l2b1_sio_data[26],l2b1_sio_data[28],l2b1_sio_data[30] ^ l2b1_sio_parity[0]}
      -active (($0in_rising_edge($0in_delay(l2b1_sio_ctag_vld,3))) && ($0in_delay(l2b1_sio_data[16] == 1,3)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l1_parity_even_cycle3
*/

/*   0in odd_parity
      -var {l2b1_sio_data[0],l2b1_sio_data[2],l2b1_sio_data[4],l2b1_sio_data[6],l2b1_sio_data[8],l2b1_sio_data[10],l2b1_sio_data[12],l2b1_sio_data[14],l2b1_sio_data[16],l2b1_sio_data[18],l2b1_sio_data[20],l2b1_sio_data[22],l2b1_sio_data[24],l2b1_sio_data[26],l2b1_sio_data[28],l2b1_sio_data[30] ^ l2b1_sio_parity[0]}
      -active (($0in_rising_edge($0in_delay(l2b1_sio_ctag_vld,4))) && ($0in_delay(l2b1_sio_data[16] == 1,4)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l1_parity_even_cycle4
*/

/*   0in odd_parity
      -var {l2b1_sio_data[0],l2b1_sio_data[2],l2b1_sio_data[4],l2b1_sio_data[6],l2b1_sio_data[8],l2b1_sio_data[10],l2b1_sio_data[12],l2b1_sio_data[14],l2b1_sio_data[16],l2b1_sio_data[18],l2b1_sio_data[20],l2b1_sio_data[22],l2b1_sio_data[24],l2b1_sio_data[26],l2b1_sio_data[28],l2b1_sio_data[30] ^ l2b1_sio_parity[0]}
      -active (($0in_rising_edge($0in_delay(l2b1_sio_ctag_vld,5))) && ($0in_delay(l2b1_sio_data[16] == 1,5)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l1_parity_even_cycle5
*/

/*   0in odd_parity
      -var {l2b1_sio_data[0],l2b1_sio_data[2],l2b1_sio_data[4],l2b1_sio_data[6],l2b1_sio_data[8],l2b1_sio_data[10],l2b1_sio_data[12],l2b1_sio_data[14],l2b1_sio_data[16],l2b1_sio_data[18],l2b1_sio_data[20],l2b1_sio_data[22],l2b1_sio_data[24],l2b1_sio_data[26],l2b1_sio_data[28],l2b1_sio_data[30] ^ l2b1_sio_parity[0]}
      -active (($0in_rising_edge($0in_delay(l2b1_sio_ctag_vld,6))) && ($0in_delay(l2b1_sio_data[16] == 1,6)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l1_parity_even_cycle6
*/

/*   0in odd_parity
      -var {l2b1_sio_data[0],l2b1_sio_data[2],l2b1_sio_data[4],l2b1_sio_data[6],l2b1_sio_data[8],l2b1_sio_data[10],l2b1_sio_data[12],l2b1_sio_data[14],l2b1_sio_data[16],l2b1_sio_data[18],l2b1_sio_data[20],l2b1_sio_data[22],l2b1_sio_data[24],l2b1_sio_data[26],l2b1_sio_data[28],l2b1_sio_data[30] ^ l2b1_sio_parity[0]}
      -active (($0in_rising_edge($0in_delay(l2b1_sio_ctag_vld,7))) && ($0in_delay(l2b1_sio_data[16] == 1,7)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l1_parity_even_cycle7
*/

/*   0in odd_parity
      -var {l2b1_sio_data[0],l2b1_sio_data[2],l2b1_sio_data[4],l2b1_sio_data[6],l2b1_sio_data[8],l2b1_sio_data[10],l2b1_sio_data[12],l2b1_sio_data[14],l2b1_sio_data[16],l2b1_sio_data[18],l2b1_sio_data[20],l2b1_sio_data[22],l2b1_sio_data[24],l2b1_sio_data[26],l2b1_sio_data[28],l2b1_sio_data[30] ^ l2b1_sio_parity[0]}
      -active (($0in_rising_edge($0in_delay(l2b1_sio_ctag_vld,8))) && ($0in_delay(l2b1_sio_data[16] == 1,8)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l1_parity_even_cycle8
*/

/*   0in odd_parity
      -var {l2b1_sio_data[0],l2b1_sio_data[2],l2b1_sio_data[4],l2b1_sio_data[6],l2b1_sio_data[8],l2b1_sio_data[10],l2b1_sio_data[12],l2b1_sio_data[14],l2b1_sio_data[16],l2b1_sio_data[18],l2b1_sio_data[20],l2b1_sio_data[22],l2b1_sio_data[24],l2b1_sio_data[26],l2b1_sio_data[28],l2b1_sio_data[30] ^ l2b1_sio_parity[0]}
      -active (($0in_rising_edge($0in_delay(l2b1_sio_ctag_vld,9))) && ($0in_delay(l2b1_sio_data[16] == 1,9)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l1_parity_even_cycle9
*/

/*   0in odd_parity
      -var {l2b1_sio_data[0],l2b1_sio_data[2],l2b1_sio_data[4],l2b1_sio_data[6],l2b1_sio_data[8],l2b1_sio_data[10],l2b1_sio_data[12],l2b1_sio_data[14],l2b1_sio_data[16],l2b1_sio_data[18],l2b1_sio_data[20],l2b1_sio_data[22],l2b1_sio_data[24],l2b1_sio_data[26],l2b1_sio_data[28],l2b1_sio_data[30] ^ l2b1_sio_parity[0]}
      -active (($0in_rising_edge($0in_delay(l2b1_sio_ctag_vld,10))) && ($0in_delay(l2b1_sio_data[16] == 1,10)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l1_parity_even_cycle10
*/

/*   0in odd_parity
      -var {l2b1_sio_data[0],l2b1_sio_data[2],l2b1_sio_data[4],l2b1_sio_data[6],l2b1_sio_data[8],l2b1_sio_data[10],l2b1_sio_data[12],l2b1_sio_data[14],l2b1_sio_data[16],l2b1_sio_data[18],l2b1_sio_data[20],l2b1_sio_data[22],l2b1_sio_data[24],l2b1_sio_data[26],l2b1_sio_data[28],l2b1_sio_data[30] ^ l2b1_sio_parity[0]}
      -active (($0in_rising_edge($0in_delay(l2b1_sio_ctag_vld,11))) && ($0in_delay(l2b1_sio_data[16] == 1,11)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l1_parity_even_cycle11
*/

/*   0in odd_parity
      -var {l2b1_sio_data[0],l2b1_sio_data[2],l2b1_sio_data[4],l2b1_sio_data[6],l2b1_sio_data[8],l2b1_sio_data[10],l2b1_sio_data[12],l2b1_sio_data[14],l2b1_sio_data[16],l2b1_sio_data[18],l2b1_sio_data[20],l2b1_sio_data[22],l2b1_sio_data[24],l2b1_sio_data[26],l2b1_sio_data[28],l2b1_sio_data[30] ^ l2b1_sio_parity[0]}
      -active (($0in_rising_edge($0in_delay(l2b1_sio_ctag_vld,12))) && ($0in_delay(l2b1_sio_data[16] == 1,12)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l1_parity_even_cycle12
*/

/*   0in odd_parity
      -var {l2b1_sio_data[0],l2b1_sio_data[2],l2b1_sio_data[4],l2b1_sio_data[6],l2b1_sio_data[8],l2b1_sio_data[10],l2b1_sio_data[12],l2b1_sio_data[14],l2b1_sio_data[16],l2b1_sio_data[18],l2b1_sio_data[20],l2b1_sio_data[22],l2b1_sio_data[24],l2b1_sio_data[26],l2b1_sio_data[28],l2b1_sio_data[30] ^ l2b1_sio_parity[0]}
      -active (($0in_rising_edge($0in_delay(l2b1_sio_ctag_vld,13))) && ($0in_delay(l2b1_sio_data[16] == 1,13)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l1_parity_even_cycle13
*/

/*   0in odd_parity
      -var {l2b1_sio_data[0],l2b1_sio_data[2],l2b1_sio_data[4],l2b1_sio_data[6],l2b1_sio_data[8],l2b1_sio_data[10],l2b1_sio_data[12],l2b1_sio_data[14],l2b1_sio_data[16],l2b1_sio_data[18],l2b1_sio_data[20],l2b1_sio_data[22],l2b1_sio_data[24],l2b1_sio_data[26],l2b1_sio_data[28],l2b1_sio_data[30] ^ l2b1_sio_parity[0]}
      -active (($0in_rising_edge($0in_delay(l2b1_sio_ctag_vld,14))) && ($0in_delay(l2b1_sio_data[16] == 1,14)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l1_parity_even_cycle14
*/

/*   0in odd_parity
      -var {l2b1_sio_data[0],l2b1_sio_data[2],l2b1_sio_data[4],l2b1_sio_data[6],l2b1_sio_data[8],l2b1_sio_data[10],l2b1_sio_data[12],l2b1_sio_data[14],l2b1_sio_data[16],l2b1_sio_data[18],l2b1_sio_data[20],l2b1_sio_data[22],l2b1_sio_data[24],l2b1_sio_data[26],l2b1_sio_data[28],l2b1_sio_data[30] ^ l2b1_sio_parity[0]}
      -active (($0in_rising_edge($0in_delay(l2b1_sio_ctag_vld,15))) && ($0in_delay(l2b1_sio_data[16] == 1,15)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l1_parity_even_cycle15
*/

/*   0in odd_parity
      -var {l2b1_sio_data[0],l2b1_sio_data[2],l2b1_sio_data[4],l2b1_sio_data[6],l2b1_sio_data[8],l2b1_sio_data[10],l2b1_sio_data[12],l2b1_sio_data[14],l2b1_sio_data[16],l2b1_sio_data[18],l2b1_sio_data[20],l2b1_sio_data[22],l2b1_sio_data[24],l2b1_sio_data[26],l2b1_sio_data[28],l2b1_sio_data[30] ^ l2b1_sio_parity[0]}
      -active (($0in_rising_edge($0in_delay(l2b1_sio_ctag_vld,16))) && ($0in_delay(l2b1_sio_data[16] == 1,16)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l1_parity_even_cycle16
*/

/*   0in odd_parity
      -var {l2b1_sio_data[1],l2b1_sio_data[3],l2b1_sio_data[5],l2b1_sio_data[7],l2b1_sio_data[9],l2b1_sio_data[11],l2b1_sio_data[13],l2b1_sio_data[15],l2b1_sio_data[17],l2b1_sio_data[19],l2b1_sio_data[21],l2b1_sio_data[23],l2b1_sio_data[25],l2b1_sio_data[27],l2b1_sio_data[29],l2b1_sio_data[31] ^ l2b1_sio_parity[1]}
      -active (($0in_rising_edge($0in_delay(l2b1_sio_ctag_vld,1))) && ($0in_delay(l2b1_sio_data[16] == 1,1)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l1_parity_odd_cycle1
*/

/*   0in odd_parity
      -var {l2b1_sio_data[1],l2b1_sio_data[3],l2b1_sio_data[5],l2b1_sio_data[7],l2b1_sio_data[9],l2b1_sio_data[11],l2b1_sio_data[13],l2b1_sio_data[15],l2b1_sio_data[17],l2b1_sio_data[19],l2b1_sio_data[21],l2b1_sio_data[23],l2b1_sio_data[25],l2b1_sio_data[27],l2b1_sio_data[29],l2b1_sio_data[31] ^ l2b1_sio_parity[1]}
      -active (($0in_rising_edge($0in_delay(l2b1_sio_ctag_vld,2))) && ($0in_delay(l2b1_sio_data[16] == 1,2)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l1_parity_odd_cycle2
*/

/*   0in odd_parity
      -var {l2b1_sio_data[1],l2b1_sio_data[3],l2b1_sio_data[5],l2b1_sio_data[7],l2b1_sio_data[9],l2b1_sio_data[11],l2b1_sio_data[13],l2b1_sio_data[15],l2b1_sio_data[17],l2b1_sio_data[19],l2b1_sio_data[21],l2b1_sio_data[23],l2b1_sio_data[25],l2b1_sio_data[27],l2b1_sio_data[29],l2b1_sio_data[31] ^ l2b1_sio_parity[1]}
      -active (($0in_rising_edge($0in_delay(l2b1_sio_ctag_vld,3))) && ($0in_delay(l2b1_sio_data[16] == 1,3)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l1_parity_odd_cycle3
*/

/*   0in odd_parity
      -var {l2b1_sio_data[1],l2b1_sio_data[3],l2b1_sio_data[5],l2b1_sio_data[7],l2b1_sio_data[9],l2b1_sio_data[11],l2b1_sio_data[13],l2b1_sio_data[15],l2b1_sio_data[17],l2b1_sio_data[19],l2b1_sio_data[21],l2b1_sio_data[23],l2b1_sio_data[25],l2b1_sio_data[27],l2b1_sio_data[29],l2b1_sio_data[31] ^ l2b1_sio_parity[1]}
      -active (($0in_rising_edge($0in_delay(l2b1_sio_ctag_vld,4))) && ($0in_delay(l2b1_sio_data[16] == 1,4)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l1_parity_odd_cycle4
*/

/*   0in odd_parity
      -var {l2b1_sio_data[1],l2b1_sio_data[3],l2b1_sio_data[5],l2b1_sio_data[7],l2b1_sio_data[9],l2b1_sio_data[11],l2b1_sio_data[13],l2b1_sio_data[15],l2b1_sio_data[17],l2b1_sio_data[19],l2b1_sio_data[21],l2b1_sio_data[23],l2b1_sio_data[25],l2b1_sio_data[27],l2b1_sio_data[29],l2b1_sio_data[31] ^ l2b1_sio_parity[1]}
      -active (($0in_rising_edge($0in_delay(l2b1_sio_ctag_vld,5))) && ($0in_delay(l2b1_sio_data[16] == 1,5)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l1_parity_odd_cycle5
*/

/*   0in odd_parity
      -var {l2b1_sio_data[1],l2b1_sio_data[3],l2b1_sio_data[5],l2b1_sio_data[7],l2b1_sio_data[9],l2b1_sio_data[11],l2b1_sio_data[13],l2b1_sio_data[15],l2b1_sio_data[17],l2b1_sio_data[19],l2b1_sio_data[21],l2b1_sio_data[23],l2b1_sio_data[25],l2b1_sio_data[27],l2b1_sio_data[29],l2b1_sio_data[31] ^ l2b1_sio_parity[1]}
      -active (($0in_rising_edge($0in_delay(l2b1_sio_ctag_vld,6))) && ($0in_delay(l2b1_sio_data[16] == 1,6)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l1_parity_odd_cycle6
*/

/*   0in odd_parity
      -var {l2b1_sio_data[1],l2b1_sio_data[3],l2b1_sio_data[5],l2b1_sio_data[7],l2b1_sio_data[9],l2b1_sio_data[11],l2b1_sio_data[13],l2b1_sio_data[15],l2b1_sio_data[17],l2b1_sio_data[19],l2b1_sio_data[21],l2b1_sio_data[23],l2b1_sio_data[25],l2b1_sio_data[27],l2b1_sio_data[29],l2b1_sio_data[31] ^ l2b1_sio_parity[1]}
      -active (($0in_rising_edge($0in_delay(l2b1_sio_ctag_vld,7))) && ($0in_delay(l2b1_sio_data[16] == 1,7)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l1_parity_odd_cycle7
*/

/*   0in odd_parity
      -var {l2b1_sio_data[1],l2b1_sio_data[3],l2b1_sio_data[5],l2b1_sio_data[7],l2b1_sio_data[9],l2b1_sio_data[11],l2b1_sio_data[13],l2b1_sio_data[15],l2b1_sio_data[17],l2b1_sio_data[19],l2b1_sio_data[21],l2b1_sio_data[23],l2b1_sio_data[25],l2b1_sio_data[27],l2b1_sio_data[29],l2b1_sio_data[31] ^ l2b1_sio_parity[1]}
      -active (($0in_rising_edge($0in_delay(l2b1_sio_ctag_vld,8))) && ($0in_delay(l2b1_sio_data[16] == 1,8)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l1_parity_odd_cycle8
*/

/*   0in odd_parity
      -var {l2b1_sio_data[1],l2b1_sio_data[3],l2b1_sio_data[5],l2b1_sio_data[7],l2b1_sio_data[9],l2b1_sio_data[11],l2b1_sio_data[13],l2b1_sio_data[15],l2b1_sio_data[17],l2b1_sio_data[19],l2b1_sio_data[21],l2b1_sio_data[23],l2b1_sio_data[25],l2b1_sio_data[27],l2b1_sio_data[29],l2b1_sio_data[31] ^ l2b1_sio_parity[1]}
      -active (($0in_rising_edge($0in_delay(l2b1_sio_ctag_vld,9))) && ($0in_delay(l2b1_sio_data[16] == 1,9)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l1_parity_odd_cycle9
*/

/*   0in odd_parity
      -var {l2b1_sio_data[1],l2b1_sio_data[3],l2b1_sio_data[5],l2b1_sio_data[7],l2b1_sio_data[9],l2b1_sio_data[11],l2b1_sio_data[13],l2b1_sio_data[15],l2b1_sio_data[17],l2b1_sio_data[19],l2b1_sio_data[21],l2b1_sio_data[23],l2b1_sio_data[25],l2b1_sio_data[27],l2b1_sio_data[29],l2b1_sio_data[31] ^ l2b1_sio_parity[1]}
      -active (($0in_rising_edge($0in_delay(l2b1_sio_ctag_vld,10))) && ($0in_delay(l2b1_sio_data[16] == 1,10)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l1_parity_odd_cycle10
*/

/*   0in odd_parity
      -var {l2b1_sio_data[1],l2b1_sio_data[3],l2b1_sio_data[5],l2b1_sio_data[7],l2b1_sio_data[9],l2b1_sio_data[11],l2b1_sio_data[13],l2b1_sio_data[15],l2b1_sio_data[17],l2b1_sio_data[19],l2b1_sio_data[21],l2b1_sio_data[23],l2b1_sio_data[25],l2b1_sio_data[27],l2b1_sio_data[29],l2b1_sio_data[31] ^ l2b1_sio_parity[1]}
      -active (($0in_rising_edge($0in_delay(l2b1_sio_ctag_vld,11))) && ($0in_delay(l2b1_sio_data[16] == 1,11)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l1_parity_odd_cycle11
*/

/*   0in odd_parity
      -var {l2b1_sio_data[1],l2b1_sio_data[3],l2b1_sio_data[5],l2b1_sio_data[7],l2b1_sio_data[9],l2b1_sio_data[11],l2b1_sio_data[13],l2b1_sio_data[15],l2b1_sio_data[17],l2b1_sio_data[19],l2b1_sio_data[21],l2b1_sio_data[23],l2b1_sio_data[25],l2b1_sio_data[27],l2b1_sio_data[29],l2b1_sio_data[31] ^ l2b1_sio_parity[1]}
      -active (($0in_rising_edge($0in_delay(l2b1_sio_ctag_vld,12))) && ($0in_delay(l2b1_sio_data[16] == 1,12)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l1_parity_odd_cycle12
*/

/*   0in odd_parity
      -var {l2b1_sio_data[1],l2b1_sio_data[3],l2b1_sio_data[5],l2b1_sio_data[7],l2b1_sio_data[9],l2b1_sio_data[11],l2b1_sio_data[13],l2b1_sio_data[15],l2b1_sio_data[17],l2b1_sio_data[19],l2b1_sio_data[21],l2b1_sio_data[23],l2b1_sio_data[25],l2b1_sio_data[27],l2b1_sio_data[29],l2b1_sio_data[31] ^ l2b1_sio_parity[1]}
      -active (($0in_rising_edge($0in_delay(l2b1_sio_ctag_vld,13))) && ($0in_delay(l2b1_sio_data[16] == 1,13)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l1_parity_odd_cycle13
*/

/*   0in odd_parity
      -var {l2b1_sio_data[1],l2b1_sio_data[3],l2b1_sio_data[5],l2b1_sio_data[7],l2b1_sio_data[9],l2b1_sio_data[11],l2b1_sio_data[13],l2b1_sio_data[15],l2b1_sio_data[17],l2b1_sio_data[19],l2b1_sio_data[21],l2b1_sio_data[23],l2b1_sio_data[25],l2b1_sio_data[27],l2b1_sio_data[29],l2b1_sio_data[31] ^ l2b1_sio_parity[1]}
      -active (($0in_rising_edge($0in_delay(l2b1_sio_ctag_vld,14))) && ($0in_delay(l2b1_sio_data[16] == 1,14)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l1_parity_odd_cycle14
*/

/*   0in odd_parity
      -var {l2b1_sio_data[1],l2b1_sio_data[3],l2b1_sio_data[5],l2b1_sio_data[7],l2b1_sio_data[9],l2b1_sio_data[11],l2b1_sio_data[13],l2b1_sio_data[15],l2b1_sio_data[17],l2b1_sio_data[19],l2b1_sio_data[21],l2b1_sio_data[23],l2b1_sio_data[25],l2b1_sio_data[27],l2b1_sio_data[29],l2b1_sio_data[31] ^ l2b1_sio_parity[1]}
      -active (($0in_rising_edge($0in_delay(l2b1_sio_ctag_vld,15))) && ($0in_delay(l2b1_sio_data[16] == 1,15)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l1_parity_odd_cycle15
*/

/*   0in odd_parity
      -var {l2b1_sio_data[1],l2b1_sio_data[3],l2b1_sio_data[5],l2b1_sio_data[7],l2b1_sio_data[9],l2b1_sio_data[11],l2b1_sio_data[13],l2b1_sio_data[15],l2b1_sio_data[17],l2b1_sio_data[19],l2b1_sio_data[21],l2b1_sio_data[23],l2b1_sio_data[25],l2b1_sio_data[27],l2b1_sio_data[29],l2b1_sio_data[31] ^ l2b1_sio_parity[1]}
      -active (($0in_rising_edge($0in_delay(l2b1_sio_ctag_vld,16))) && ($0in_delay(l2b1_sio_data[16] == 1,16)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l1_parity_odd_cycle16
*/

/*   0in odd_parity
      -var {l2b2_sio_data[0],l2b2_sio_data[2],l2b2_sio_data[4],l2b2_sio_data[6],l2b2_sio_data[8],l2b2_sio_data[10],l2b2_sio_data[12],l2b2_sio_data[14],l2b2_sio_data[16],l2b2_sio_data[18],l2b2_sio_data[20],l2b2_sio_data[22],l2b2_sio_data[24],l2b2_sio_data[26],l2b2_sio_data[28],l2b2_sio_data[30] ^ l2b2_sio_parity[0]}
      -active (($0in_rising_edge($0in_delay(l2b2_sio_ctag_vld,1))) && ($0in_delay(l2b2_sio_data[16] == 1,1)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l2_parity_even_cycle1
*/

/*   0in odd_parity
      -var {l2b2_sio_data[0],l2b2_sio_data[2],l2b2_sio_data[4],l2b2_sio_data[6],l2b2_sio_data[8],l2b2_sio_data[10],l2b2_sio_data[12],l2b2_sio_data[14],l2b2_sio_data[16],l2b2_sio_data[18],l2b2_sio_data[20],l2b2_sio_data[22],l2b2_sio_data[24],l2b2_sio_data[26],l2b2_sio_data[28],l2b2_sio_data[30] ^ l2b2_sio_parity[0]}
      -active (($0in_rising_edge($0in_delay(l2b2_sio_ctag_vld,2))) && ($0in_delay(l2b2_sio_data[16] == 1,2)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l2_parity_even_cycle2
*/

/*   0in odd_parity
      -var {l2b2_sio_data[0],l2b2_sio_data[2],l2b2_sio_data[4],l2b2_sio_data[6],l2b2_sio_data[8],l2b2_sio_data[10],l2b2_sio_data[12],l2b2_sio_data[14],l2b2_sio_data[16],l2b2_sio_data[18],l2b2_sio_data[20],l2b2_sio_data[22],l2b2_sio_data[24],l2b2_sio_data[26],l2b2_sio_data[28],l2b2_sio_data[30] ^ l2b2_sio_parity[0]}
      -active (($0in_rising_edge($0in_delay(l2b2_sio_ctag_vld,3))) && ($0in_delay(l2b2_sio_data[16] == 1,3)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l2_parity_even_cycle3
*/

/*   0in odd_parity
      -var {l2b2_sio_data[0],l2b2_sio_data[2],l2b2_sio_data[4],l2b2_sio_data[6],l2b2_sio_data[8],l2b2_sio_data[10],l2b2_sio_data[12],l2b2_sio_data[14],l2b2_sio_data[16],l2b2_sio_data[18],l2b2_sio_data[20],l2b2_sio_data[22],l2b2_sio_data[24],l2b2_sio_data[26],l2b2_sio_data[28],l2b2_sio_data[30] ^ l2b2_sio_parity[0]}
      -active (($0in_rising_edge($0in_delay(l2b2_sio_ctag_vld,4))) && ($0in_delay(l2b2_sio_data[16] == 1,4)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l2_parity_even_cycle4
*/

/*   0in odd_parity
      -var {l2b2_sio_data[0],l2b2_sio_data[2],l2b2_sio_data[4],l2b2_sio_data[6],l2b2_sio_data[8],l2b2_sio_data[10],l2b2_sio_data[12],l2b2_sio_data[14],l2b2_sio_data[16],l2b2_sio_data[18],l2b2_sio_data[20],l2b2_sio_data[22],l2b2_sio_data[24],l2b2_sio_data[26],l2b2_sio_data[28],l2b2_sio_data[30] ^ l2b2_sio_parity[0]}
      -active (($0in_rising_edge($0in_delay(l2b2_sio_ctag_vld,5))) && ($0in_delay(l2b2_sio_data[16] == 1,5)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l2_parity_even_cycle5
*/

/*   0in odd_parity
      -var {l2b2_sio_data[0],l2b2_sio_data[2],l2b2_sio_data[4],l2b2_sio_data[6],l2b2_sio_data[8],l2b2_sio_data[10],l2b2_sio_data[12],l2b2_sio_data[14],l2b2_sio_data[16],l2b2_sio_data[18],l2b2_sio_data[20],l2b2_sio_data[22],l2b2_sio_data[24],l2b2_sio_data[26],l2b2_sio_data[28],l2b2_sio_data[30] ^ l2b2_sio_parity[0]}
      -active (($0in_rising_edge($0in_delay(l2b2_sio_ctag_vld,6))) && ($0in_delay(l2b2_sio_data[16] == 1,6)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l2_parity_even_cycle6
*/

/*   0in odd_parity
      -var {l2b2_sio_data[0],l2b2_sio_data[2],l2b2_sio_data[4],l2b2_sio_data[6],l2b2_sio_data[8],l2b2_sio_data[10],l2b2_sio_data[12],l2b2_sio_data[14],l2b2_sio_data[16],l2b2_sio_data[18],l2b2_sio_data[20],l2b2_sio_data[22],l2b2_sio_data[24],l2b2_sio_data[26],l2b2_sio_data[28],l2b2_sio_data[30] ^ l2b2_sio_parity[0]}
      -active (($0in_rising_edge($0in_delay(l2b2_sio_ctag_vld,7))) && ($0in_delay(l2b2_sio_data[16] == 1,7)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l2_parity_even_cycle7
*/

/*   0in odd_parity
      -var {l2b2_sio_data[0],l2b2_sio_data[2],l2b2_sio_data[4],l2b2_sio_data[6],l2b2_sio_data[8],l2b2_sio_data[10],l2b2_sio_data[12],l2b2_sio_data[14],l2b2_sio_data[16],l2b2_sio_data[18],l2b2_sio_data[20],l2b2_sio_data[22],l2b2_sio_data[24],l2b2_sio_data[26],l2b2_sio_data[28],l2b2_sio_data[30] ^ l2b2_sio_parity[0]}
      -active (($0in_rising_edge($0in_delay(l2b2_sio_ctag_vld,8))) && ($0in_delay(l2b2_sio_data[16] == 1,8)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l2_parity_even_cycle8
*/

/*   0in odd_parity
      -var {l2b2_sio_data[0],l2b2_sio_data[2],l2b2_sio_data[4],l2b2_sio_data[6],l2b2_sio_data[8],l2b2_sio_data[10],l2b2_sio_data[12],l2b2_sio_data[14],l2b2_sio_data[16],l2b2_sio_data[18],l2b2_sio_data[20],l2b2_sio_data[22],l2b2_sio_data[24],l2b2_sio_data[26],l2b2_sio_data[28],l2b2_sio_data[30] ^ l2b2_sio_parity[0]}
      -active (($0in_rising_edge($0in_delay(l2b2_sio_ctag_vld,9))) && ($0in_delay(l2b2_sio_data[16] == 1,9)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l2_parity_even_cycle9
*/

/*   0in odd_parity
      -var {l2b2_sio_data[0],l2b2_sio_data[2],l2b2_sio_data[4],l2b2_sio_data[6],l2b2_sio_data[8],l2b2_sio_data[10],l2b2_sio_data[12],l2b2_sio_data[14],l2b2_sio_data[16],l2b2_sio_data[18],l2b2_sio_data[20],l2b2_sio_data[22],l2b2_sio_data[24],l2b2_sio_data[26],l2b2_sio_data[28],l2b2_sio_data[30] ^ l2b2_sio_parity[0]}
      -active (($0in_rising_edge($0in_delay(l2b2_sio_ctag_vld,10))) && ($0in_delay(l2b2_sio_data[16] == 1,10)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l2_parity_even_cycle10
*/

/*   0in odd_parity
      -var {l2b2_sio_data[0],l2b2_sio_data[2],l2b2_sio_data[4],l2b2_sio_data[6],l2b2_sio_data[8],l2b2_sio_data[10],l2b2_sio_data[12],l2b2_sio_data[14],l2b2_sio_data[16],l2b2_sio_data[18],l2b2_sio_data[20],l2b2_sio_data[22],l2b2_sio_data[24],l2b2_sio_data[26],l2b2_sio_data[28],l2b2_sio_data[30] ^ l2b2_sio_parity[0]}
      -active (($0in_rising_edge($0in_delay(l2b2_sio_ctag_vld,11))) && ($0in_delay(l2b2_sio_data[16] == 1,11)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l2_parity_even_cycle11
*/

/*   0in odd_parity
      -var {l2b2_sio_data[0],l2b2_sio_data[2],l2b2_sio_data[4],l2b2_sio_data[6],l2b2_sio_data[8],l2b2_sio_data[10],l2b2_sio_data[12],l2b2_sio_data[14],l2b2_sio_data[16],l2b2_sio_data[18],l2b2_sio_data[20],l2b2_sio_data[22],l2b2_sio_data[24],l2b2_sio_data[26],l2b2_sio_data[28],l2b2_sio_data[30] ^ l2b2_sio_parity[0]}
      -active (($0in_rising_edge($0in_delay(l2b2_sio_ctag_vld,12))) && ($0in_delay(l2b2_sio_data[16] == 1,12)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l2_parity_even_cycle12
*/

/*   0in odd_parity
      -var {l2b2_sio_data[0],l2b2_sio_data[2],l2b2_sio_data[4],l2b2_sio_data[6],l2b2_sio_data[8],l2b2_sio_data[10],l2b2_sio_data[12],l2b2_sio_data[14],l2b2_sio_data[16],l2b2_sio_data[18],l2b2_sio_data[20],l2b2_sio_data[22],l2b2_sio_data[24],l2b2_sio_data[26],l2b2_sio_data[28],l2b2_sio_data[30] ^ l2b2_sio_parity[0]}
      -active (($0in_rising_edge($0in_delay(l2b2_sio_ctag_vld,13))) && ($0in_delay(l2b2_sio_data[16] == 1,13)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l2_parity_even_cycle13
*/

/*   0in odd_parity
      -var {l2b2_sio_data[0],l2b2_sio_data[2],l2b2_sio_data[4],l2b2_sio_data[6],l2b2_sio_data[8],l2b2_sio_data[10],l2b2_sio_data[12],l2b2_sio_data[14],l2b2_sio_data[16],l2b2_sio_data[18],l2b2_sio_data[20],l2b2_sio_data[22],l2b2_sio_data[24],l2b2_sio_data[26],l2b2_sio_data[28],l2b2_sio_data[30] ^ l2b2_sio_parity[0]}
      -active (($0in_rising_edge($0in_delay(l2b2_sio_ctag_vld,14))) && ($0in_delay(l2b2_sio_data[16] == 1,14)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l2_parity_even_cycle14
*/

/*   0in odd_parity
      -var {l2b2_sio_data[0],l2b2_sio_data[2],l2b2_sio_data[4],l2b2_sio_data[6],l2b2_sio_data[8],l2b2_sio_data[10],l2b2_sio_data[12],l2b2_sio_data[14],l2b2_sio_data[16],l2b2_sio_data[18],l2b2_sio_data[20],l2b2_sio_data[22],l2b2_sio_data[24],l2b2_sio_data[26],l2b2_sio_data[28],l2b2_sio_data[30] ^ l2b2_sio_parity[0]}
      -active (($0in_rising_edge($0in_delay(l2b2_sio_ctag_vld,15))) && ($0in_delay(l2b2_sio_data[16] == 1,15)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l2_parity_even_cycle15
*/

/*   0in odd_parity
      -var {l2b2_sio_data[0],l2b2_sio_data[2],l2b2_sio_data[4],l2b2_sio_data[6],l2b2_sio_data[8],l2b2_sio_data[10],l2b2_sio_data[12],l2b2_sio_data[14],l2b2_sio_data[16],l2b2_sio_data[18],l2b2_sio_data[20],l2b2_sio_data[22],l2b2_sio_data[24],l2b2_sio_data[26],l2b2_sio_data[28],l2b2_sio_data[30] ^ l2b2_sio_parity[0]}
      -active (($0in_rising_edge($0in_delay(l2b2_sio_ctag_vld,16))) && ($0in_delay(l2b2_sio_data[16] == 1,16)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l2_parity_even_cycle16
*/

/*   0in odd_parity
      -var {l2b2_sio_data[1],l2b2_sio_data[3],l2b2_sio_data[5],l2b2_sio_data[7],l2b2_sio_data[9],l2b2_sio_data[11],l2b2_sio_data[13],l2b2_sio_data[15],l2b2_sio_data[17],l2b2_sio_data[19],l2b2_sio_data[21],l2b2_sio_data[23],l2b2_sio_data[25],l2b2_sio_data[27],l2b2_sio_data[29],l2b2_sio_data[31] ^ l2b2_sio_parity[1]}
      -active (($0in_rising_edge($0in_delay(l2b2_sio_ctag_vld,1))) && ($0in_delay(l2b2_sio_data[16] == 1,1)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l2_parity_odd_cycle1
*/

/*   0in odd_parity
      -var {l2b2_sio_data[1],l2b2_sio_data[3],l2b2_sio_data[5],l2b2_sio_data[7],l2b2_sio_data[9],l2b2_sio_data[11],l2b2_sio_data[13],l2b2_sio_data[15],l2b2_sio_data[17],l2b2_sio_data[19],l2b2_sio_data[21],l2b2_sio_data[23],l2b2_sio_data[25],l2b2_sio_data[27],l2b2_sio_data[29],l2b2_sio_data[31] ^ l2b2_sio_parity[1]}
      -active (($0in_rising_edge($0in_delay(l2b2_sio_ctag_vld,2))) && ($0in_delay(l2b2_sio_data[16] == 1,2)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l2_parity_odd_cycle2
*/

/*   0in odd_parity
      -var {l2b2_sio_data[1],l2b2_sio_data[3],l2b2_sio_data[5],l2b2_sio_data[7],l2b2_sio_data[9],l2b2_sio_data[11],l2b2_sio_data[13],l2b2_sio_data[15],l2b2_sio_data[17],l2b2_sio_data[19],l2b2_sio_data[21],l2b2_sio_data[23],l2b2_sio_data[25],l2b2_sio_data[27],l2b2_sio_data[29],l2b2_sio_data[31] ^ l2b2_sio_parity[1]}
      -active (($0in_rising_edge($0in_delay(l2b2_sio_ctag_vld,3))) && ($0in_delay(l2b2_sio_data[16] == 1,3)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l2_parity_odd_cycle3
*/

/*   0in odd_parity
      -var {l2b2_sio_data[1],l2b2_sio_data[3],l2b2_sio_data[5],l2b2_sio_data[7],l2b2_sio_data[9],l2b2_sio_data[11],l2b2_sio_data[13],l2b2_sio_data[15],l2b2_sio_data[17],l2b2_sio_data[19],l2b2_sio_data[21],l2b2_sio_data[23],l2b2_sio_data[25],l2b2_sio_data[27],l2b2_sio_data[29],l2b2_sio_data[31] ^ l2b2_sio_parity[1]}
      -active (($0in_rising_edge($0in_delay(l2b2_sio_ctag_vld,4))) && ($0in_delay(l2b2_sio_data[16] == 1,4)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l2_parity_odd_cycle4
*/

/*   0in odd_parity
      -var {l2b2_sio_data[1],l2b2_sio_data[3],l2b2_sio_data[5],l2b2_sio_data[7],l2b2_sio_data[9],l2b2_sio_data[11],l2b2_sio_data[13],l2b2_sio_data[15],l2b2_sio_data[17],l2b2_sio_data[19],l2b2_sio_data[21],l2b2_sio_data[23],l2b2_sio_data[25],l2b2_sio_data[27],l2b2_sio_data[29],l2b2_sio_data[31] ^ l2b2_sio_parity[1]}
      -active (($0in_rising_edge($0in_delay(l2b2_sio_ctag_vld,5))) && ($0in_delay(l2b2_sio_data[16] == 1,5)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l2_parity_odd_cycle5
*/

/*   0in odd_parity
      -var {l2b2_sio_data[1],l2b2_sio_data[3],l2b2_sio_data[5],l2b2_sio_data[7],l2b2_sio_data[9],l2b2_sio_data[11],l2b2_sio_data[13],l2b2_sio_data[15],l2b2_sio_data[17],l2b2_sio_data[19],l2b2_sio_data[21],l2b2_sio_data[23],l2b2_sio_data[25],l2b2_sio_data[27],l2b2_sio_data[29],l2b2_sio_data[31] ^ l2b2_sio_parity[1]}
      -active (($0in_rising_edge($0in_delay(l2b2_sio_ctag_vld,6))) && ($0in_delay(l2b2_sio_data[16] == 1,6)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l2_parity_odd_cycle6
*/

/*   0in odd_parity
      -var {l2b2_sio_data[1],l2b2_sio_data[3],l2b2_sio_data[5],l2b2_sio_data[7],l2b2_sio_data[9],l2b2_sio_data[11],l2b2_sio_data[13],l2b2_sio_data[15],l2b2_sio_data[17],l2b2_sio_data[19],l2b2_sio_data[21],l2b2_sio_data[23],l2b2_sio_data[25],l2b2_sio_data[27],l2b2_sio_data[29],l2b2_sio_data[31] ^ l2b2_sio_parity[1]}
      -active (($0in_rising_edge($0in_delay(l2b2_sio_ctag_vld,7))) && ($0in_delay(l2b2_sio_data[16] == 1,7)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l2_parity_odd_cycle7
*/

/*   0in odd_parity
      -var {l2b2_sio_data[1],l2b2_sio_data[3],l2b2_sio_data[5],l2b2_sio_data[7],l2b2_sio_data[9],l2b2_sio_data[11],l2b2_sio_data[13],l2b2_sio_data[15],l2b2_sio_data[17],l2b2_sio_data[19],l2b2_sio_data[21],l2b2_sio_data[23],l2b2_sio_data[25],l2b2_sio_data[27],l2b2_sio_data[29],l2b2_sio_data[31] ^ l2b2_sio_parity[1]}
      -active (($0in_rising_edge($0in_delay(l2b2_sio_ctag_vld,8))) && ($0in_delay(l2b2_sio_data[16] == 1,8)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l2_parity_odd_cycle8
*/

/*   0in odd_parity
      -var {l2b2_sio_data[1],l2b2_sio_data[3],l2b2_sio_data[5],l2b2_sio_data[7],l2b2_sio_data[9],l2b2_sio_data[11],l2b2_sio_data[13],l2b2_sio_data[15],l2b2_sio_data[17],l2b2_sio_data[19],l2b2_sio_data[21],l2b2_sio_data[23],l2b2_sio_data[25],l2b2_sio_data[27],l2b2_sio_data[29],l2b2_sio_data[31] ^ l2b2_sio_parity[1]}
      -active (($0in_rising_edge($0in_delay(l2b2_sio_ctag_vld,9))) && ($0in_delay(l2b2_sio_data[16] == 1,9)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l2_parity_odd_cycle9
*/

/*   0in odd_parity
      -var {l2b2_sio_data[1],l2b2_sio_data[3],l2b2_sio_data[5],l2b2_sio_data[7],l2b2_sio_data[9],l2b2_sio_data[11],l2b2_sio_data[13],l2b2_sio_data[15],l2b2_sio_data[17],l2b2_sio_data[19],l2b2_sio_data[21],l2b2_sio_data[23],l2b2_sio_data[25],l2b2_sio_data[27],l2b2_sio_data[29],l2b2_sio_data[31] ^ l2b2_sio_parity[1]}
      -active (($0in_rising_edge($0in_delay(l2b2_sio_ctag_vld,10))) && ($0in_delay(l2b2_sio_data[16] == 1,10)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l2_parity_odd_cycle10
*/

/*   0in odd_parity
      -var {l2b2_sio_data[1],l2b2_sio_data[3],l2b2_sio_data[5],l2b2_sio_data[7],l2b2_sio_data[9],l2b2_sio_data[11],l2b2_sio_data[13],l2b2_sio_data[15],l2b2_sio_data[17],l2b2_sio_data[19],l2b2_sio_data[21],l2b2_sio_data[23],l2b2_sio_data[25],l2b2_sio_data[27],l2b2_sio_data[29],l2b2_sio_data[31] ^ l2b2_sio_parity[1]}
      -active (($0in_rising_edge($0in_delay(l2b2_sio_ctag_vld,11))) && ($0in_delay(l2b2_sio_data[16] == 1,11)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l2_parity_odd_cycle11
*/

/*   0in odd_parity
      -var {l2b2_sio_data[1],l2b2_sio_data[3],l2b2_sio_data[5],l2b2_sio_data[7],l2b2_sio_data[9],l2b2_sio_data[11],l2b2_sio_data[13],l2b2_sio_data[15],l2b2_sio_data[17],l2b2_sio_data[19],l2b2_sio_data[21],l2b2_sio_data[23],l2b2_sio_data[25],l2b2_sio_data[27],l2b2_sio_data[29],l2b2_sio_data[31] ^ l2b2_sio_parity[1]}
      -active (($0in_rising_edge($0in_delay(l2b2_sio_ctag_vld,12))) && ($0in_delay(l2b2_sio_data[16] == 1,12)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l2_parity_odd_cycle12
*/

/*   0in odd_parity
      -var {l2b2_sio_data[1],l2b2_sio_data[3],l2b2_sio_data[5],l2b2_sio_data[7],l2b2_sio_data[9],l2b2_sio_data[11],l2b2_sio_data[13],l2b2_sio_data[15],l2b2_sio_data[17],l2b2_sio_data[19],l2b2_sio_data[21],l2b2_sio_data[23],l2b2_sio_data[25],l2b2_sio_data[27],l2b2_sio_data[29],l2b2_sio_data[31] ^ l2b2_sio_parity[1]}
      -active (($0in_rising_edge($0in_delay(l2b2_sio_ctag_vld,13))) && ($0in_delay(l2b2_sio_data[16] == 1,13)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l2_parity_odd_cycle13
*/

/*   0in odd_parity
      -var {l2b2_sio_data[1],l2b2_sio_data[3],l2b2_sio_data[5],l2b2_sio_data[7],l2b2_sio_data[9],l2b2_sio_data[11],l2b2_sio_data[13],l2b2_sio_data[15],l2b2_sio_data[17],l2b2_sio_data[19],l2b2_sio_data[21],l2b2_sio_data[23],l2b2_sio_data[25],l2b2_sio_data[27],l2b2_sio_data[29],l2b2_sio_data[31] ^ l2b2_sio_parity[1]}
      -active (($0in_rising_edge($0in_delay(l2b2_sio_ctag_vld,14))) && ($0in_delay(l2b2_sio_data[16] == 1,14)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l2_parity_odd_cycle14
*/

/*   0in odd_parity
      -var {l2b2_sio_data[1],l2b2_sio_data[3],l2b2_sio_data[5],l2b2_sio_data[7],l2b2_sio_data[9],l2b2_sio_data[11],l2b2_sio_data[13],l2b2_sio_data[15],l2b2_sio_data[17],l2b2_sio_data[19],l2b2_sio_data[21],l2b2_sio_data[23],l2b2_sio_data[25],l2b2_sio_data[27],l2b2_sio_data[29],l2b2_sio_data[31] ^ l2b2_sio_parity[1]}
      -active (($0in_rising_edge($0in_delay(l2b2_sio_ctag_vld,15))) && ($0in_delay(l2b2_sio_data[16] == 1,15)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l2_parity_odd_cycle15
*/

/*   0in odd_parity
      -var {l2b2_sio_data[1],l2b2_sio_data[3],l2b2_sio_data[5],l2b2_sio_data[7],l2b2_sio_data[9],l2b2_sio_data[11],l2b2_sio_data[13],l2b2_sio_data[15],l2b2_sio_data[17],l2b2_sio_data[19],l2b2_sio_data[21],l2b2_sio_data[23],l2b2_sio_data[25],l2b2_sio_data[27],l2b2_sio_data[29],l2b2_sio_data[31] ^ l2b2_sio_parity[1]}
      -active (($0in_rising_edge($0in_delay(l2b2_sio_ctag_vld,16))) && ($0in_delay(l2b2_sio_data[16] == 1,16)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l2_parity_odd_cycle16
*/

/*   0in odd_parity
      -var {l2b3_sio_data[0],l2b3_sio_data[2],l2b3_sio_data[4],l2b3_sio_data[6],l2b3_sio_data[8],l2b3_sio_data[10],l2b3_sio_data[12],l2b3_sio_data[14],l2b3_sio_data[16],l2b3_sio_data[18],l2b3_sio_data[20],l2b3_sio_data[22],l2b3_sio_data[24],l2b3_sio_data[26],l2b3_sio_data[28],l2b3_sio_data[30] ^ l2b3_sio_parity[0]}
      -active (($0in_rising_edge($0in_delay(l2b3_sio_ctag_vld,1))) && ($0in_delay(l2b3_sio_data[16] == 1,1)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l3_parity_even_cycle1
*/

/*   0in odd_parity
      -var {l2b3_sio_data[0],l2b3_sio_data[2],l2b3_sio_data[4],l2b3_sio_data[6],l2b3_sio_data[8],l2b3_sio_data[10],l2b3_sio_data[12],l2b3_sio_data[14],l2b3_sio_data[16],l2b3_sio_data[18],l2b3_sio_data[20],l2b3_sio_data[22],l2b3_sio_data[24],l2b3_sio_data[26],l2b3_sio_data[28],l2b3_sio_data[30] ^ l2b3_sio_parity[0]}
      -active (($0in_rising_edge($0in_delay(l2b3_sio_ctag_vld,2))) && ($0in_delay(l2b3_sio_data[16] == 1,2)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l3_parity_even_cycle2
*/

/*   0in odd_parity
      -var {l2b3_sio_data[0],l2b3_sio_data[2],l2b3_sio_data[4],l2b3_sio_data[6],l2b3_sio_data[8],l2b3_sio_data[10],l2b3_sio_data[12],l2b3_sio_data[14],l2b3_sio_data[16],l2b3_sio_data[18],l2b3_sio_data[20],l2b3_sio_data[22],l2b3_sio_data[24],l2b3_sio_data[26],l2b3_sio_data[28],l2b3_sio_data[30] ^ l2b3_sio_parity[0]}
      -active (($0in_rising_edge($0in_delay(l2b3_sio_ctag_vld,3))) && ($0in_delay(l2b3_sio_data[16] == 1,3)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l3_parity_even_cycle3
*/

/*   0in odd_parity
      -var {l2b3_sio_data[0],l2b3_sio_data[2],l2b3_sio_data[4],l2b3_sio_data[6],l2b3_sio_data[8],l2b3_sio_data[10],l2b3_sio_data[12],l2b3_sio_data[14],l2b3_sio_data[16],l2b3_sio_data[18],l2b3_sio_data[20],l2b3_sio_data[22],l2b3_sio_data[24],l2b3_sio_data[26],l2b3_sio_data[28],l2b3_sio_data[30] ^ l2b3_sio_parity[0]}
      -active (($0in_rising_edge($0in_delay(l2b3_sio_ctag_vld,4))) && ($0in_delay(l2b3_sio_data[16] == 1,4)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l3_parity_even_cycle4
*/

/*   0in odd_parity
      -var {l2b3_sio_data[0],l2b3_sio_data[2],l2b3_sio_data[4],l2b3_sio_data[6],l2b3_sio_data[8],l2b3_sio_data[10],l2b3_sio_data[12],l2b3_sio_data[14],l2b3_sio_data[16],l2b3_sio_data[18],l2b3_sio_data[20],l2b3_sio_data[22],l2b3_sio_data[24],l2b3_sio_data[26],l2b3_sio_data[28],l2b3_sio_data[30] ^ l2b3_sio_parity[0]}
      -active (($0in_rising_edge($0in_delay(l2b3_sio_ctag_vld,5))) && ($0in_delay(l2b3_sio_data[16] == 1,5)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l3_parity_even_cycle5
*/

/*   0in odd_parity
      -var {l2b3_sio_data[0],l2b3_sio_data[2],l2b3_sio_data[4],l2b3_sio_data[6],l2b3_sio_data[8],l2b3_sio_data[10],l2b3_sio_data[12],l2b3_sio_data[14],l2b3_sio_data[16],l2b3_sio_data[18],l2b3_sio_data[20],l2b3_sio_data[22],l2b3_sio_data[24],l2b3_sio_data[26],l2b3_sio_data[28],l2b3_sio_data[30] ^ l2b3_sio_parity[0]}
      -active (($0in_rising_edge($0in_delay(l2b3_sio_ctag_vld,6))) && ($0in_delay(l2b3_sio_data[16] == 1,6)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l3_parity_even_cycle6
*/

/*   0in odd_parity
      -var {l2b3_sio_data[0],l2b3_sio_data[2],l2b3_sio_data[4],l2b3_sio_data[6],l2b3_sio_data[8],l2b3_sio_data[10],l2b3_sio_data[12],l2b3_sio_data[14],l2b3_sio_data[16],l2b3_sio_data[18],l2b3_sio_data[20],l2b3_sio_data[22],l2b3_sio_data[24],l2b3_sio_data[26],l2b3_sio_data[28],l2b3_sio_data[30] ^ l2b3_sio_parity[0]}
      -active (($0in_rising_edge($0in_delay(l2b3_sio_ctag_vld,7))) && ($0in_delay(l2b3_sio_data[16] == 1,7)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l3_parity_even_cycle7
*/

/*   0in odd_parity
      -var {l2b3_sio_data[0],l2b3_sio_data[2],l2b3_sio_data[4],l2b3_sio_data[6],l2b3_sio_data[8],l2b3_sio_data[10],l2b3_sio_data[12],l2b3_sio_data[14],l2b3_sio_data[16],l2b3_sio_data[18],l2b3_sio_data[20],l2b3_sio_data[22],l2b3_sio_data[24],l2b3_sio_data[26],l2b3_sio_data[28],l2b3_sio_data[30] ^ l2b3_sio_parity[0]}
      -active (($0in_rising_edge($0in_delay(l2b3_sio_ctag_vld,8))) && ($0in_delay(l2b3_sio_data[16] == 1,8)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l3_parity_even_cycle8
*/

/*   0in odd_parity
      -var {l2b3_sio_data[0],l2b3_sio_data[2],l2b3_sio_data[4],l2b3_sio_data[6],l2b3_sio_data[8],l2b3_sio_data[10],l2b3_sio_data[12],l2b3_sio_data[14],l2b3_sio_data[16],l2b3_sio_data[18],l2b3_sio_data[20],l2b3_sio_data[22],l2b3_sio_data[24],l2b3_sio_data[26],l2b3_sio_data[28],l2b3_sio_data[30] ^ l2b3_sio_parity[0]}
      -active (($0in_rising_edge($0in_delay(l2b3_sio_ctag_vld,9))) && ($0in_delay(l2b3_sio_data[16] == 1,9)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l3_parity_even_cycle9
*/

/*   0in odd_parity
      -var {l2b3_sio_data[0],l2b3_sio_data[2],l2b3_sio_data[4],l2b3_sio_data[6],l2b3_sio_data[8],l2b3_sio_data[10],l2b3_sio_data[12],l2b3_sio_data[14],l2b3_sio_data[16],l2b3_sio_data[18],l2b3_sio_data[20],l2b3_sio_data[22],l2b3_sio_data[24],l2b3_sio_data[26],l2b3_sio_data[28],l2b3_sio_data[30] ^ l2b3_sio_parity[0]}
      -active (($0in_rising_edge($0in_delay(l2b3_sio_ctag_vld,10))) && ($0in_delay(l2b3_sio_data[16] == 1,10)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l3_parity_even_cycle10
*/

/*   0in odd_parity
      -var {l2b3_sio_data[0],l2b3_sio_data[2],l2b3_sio_data[4],l2b3_sio_data[6],l2b3_sio_data[8],l2b3_sio_data[10],l2b3_sio_data[12],l2b3_sio_data[14],l2b3_sio_data[16],l2b3_sio_data[18],l2b3_sio_data[20],l2b3_sio_data[22],l2b3_sio_data[24],l2b3_sio_data[26],l2b3_sio_data[28],l2b3_sio_data[30] ^ l2b3_sio_parity[0]}
      -active (($0in_rising_edge($0in_delay(l2b3_sio_ctag_vld,11))) && ($0in_delay(l2b3_sio_data[16] == 1,11)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l3_parity_even_cycle11
*/

/*   0in odd_parity
      -var {l2b3_sio_data[0],l2b3_sio_data[2],l2b3_sio_data[4],l2b3_sio_data[6],l2b3_sio_data[8],l2b3_sio_data[10],l2b3_sio_data[12],l2b3_sio_data[14],l2b3_sio_data[16],l2b3_sio_data[18],l2b3_sio_data[20],l2b3_sio_data[22],l2b3_sio_data[24],l2b3_sio_data[26],l2b3_sio_data[28],l2b3_sio_data[30] ^ l2b3_sio_parity[0]}
      -active (($0in_rising_edge($0in_delay(l2b3_sio_ctag_vld,12))) && ($0in_delay(l2b3_sio_data[16] == 1,12)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l3_parity_even_cycle12
*/

/*   0in odd_parity
      -var {l2b3_sio_data[0],l2b3_sio_data[2],l2b3_sio_data[4],l2b3_sio_data[6],l2b3_sio_data[8],l2b3_sio_data[10],l2b3_sio_data[12],l2b3_sio_data[14],l2b3_sio_data[16],l2b3_sio_data[18],l2b3_sio_data[20],l2b3_sio_data[22],l2b3_sio_data[24],l2b3_sio_data[26],l2b3_sio_data[28],l2b3_sio_data[30] ^ l2b3_sio_parity[0]}
      -active (($0in_rising_edge($0in_delay(l2b3_sio_ctag_vld,13))) && ($0in_delay(l2b3_sio_data[16] == 1,13)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l3_parity_even_cycle13
*/

/*   0in odd_parity
      -var {l2b3_sio_data[0],l2b3_sio_data[2],l2b3_sio_data[4],l2b3_sio_data[6],l2b3_sio_data[8],l2b3_sio_data[10],l2b3_sio_data[12],l2b3_sio_data[14],l2b3_sio_data[16],l2b3_sio_data[18],l2b3_sio_data[20],l2b3_sio_data[22],l2b3_sio_data[24],l2b3_sio_data[26],l2b3_sio_data[28],l2b3_sio_data[30] ^ l2b3_sio_parity[0]}
      -active (($0in_rising_edge($0in_delay(l2b3_sio_ctag_vld,14))) && ($0in_delay(l2b3_sio_data[16] == 1,14)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l3_parity_even_cycle14
*/

/*   0in odd_parity
      -var {l2b3_sio_data[0],l2b3_sio_data[2],l2b3_sio_data[4],l2b3_sio_data[6],l2b3_sio_data[8],l2b3_sio_data[10],l2b3_sio_data[12],l2b3_sio_data[14],l2b3_sio_data[16],l2b3_sio_data[18],l2b3_sio_data[20],l2b3_sio_data[22],l2b3_sio_data[24],l2b3_sio_data[26],l2b3_sio_data[28],l2b3_sio_data[30] ^ l2b3_sio_parity[0]}
      -active (($0in_rising_edge($0in_delay(l2b3_sio_ctag_vld,15))) && ($0in_delay(l2b3_sio_data[16] == 1,15)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l3_parity_even_cycle15
*/

/*   0in odd_parity
      -var {l2b3_sio_data[0],l2b3_sio_data[2],l2b3_sio_data[4],l2b3_sio_data[6],l2b3_sio_data[8],l2b3_sio_data[10],l2b3_sio_data[12],l2b3_sio_data[14],l2b3_sio_data[16],l2b3_sio_data[18],l2b3_sio_data[20],l2b3_sio_data[22],l2b3_sio_data[24],l2b3_sio_data[26],l2b3_sio_data[28],l2b3_sio_data[30] ^ l2b3_sio_parity[0]}
      -active (($0in_rising_edge($0in_delay(l2b3_sio_ctag_vld,16))) && ($0in_delay(l2b3_sio_data[16] == 1,16)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l3_parity_even_cycle16
*/

/*   0in odd_parity
      -var {l2b3_sio_data[1],l2b3_sio_data[3],l2b3_sio_data[5],l2b3_sio_data[7],l2b3_sio_data[9],l2b3_sio_data[11],l2b3_sio_data[13],l2b3_sio_data[15],l2b3_sio_data[17],l2b3_sio_data[19],l2b3_sio_data[21],l2b3_sio_data[23],l2b3_sio_data[25],l2b3_sio_data[27],l2b3_sio_data[29],l2b3_sio_data[31] ^ l2b3_sio_parity[1]}
      -active (($0in_rising_edge($0in_delay(l2b3_sio_ctag_vld,1))) && ($0in_delay(l2b3_sio_data[16] == 1,1)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l3_parity_odd_cycle1
*/

/*   0in odd_parity
      -var {l2b3_sio_data[1],l2b3_sio_data[3],l2b3_sio_data[5],l2b3_sio_data[7],l2b3_sio_data[9],l2b3_sio_data[11],l2b3_sio_data[13],l2b3_sio_data[15],l2b3_sio_data[17],l2b3_sio_data[19],l2b3_sio_data[21],l2b3_sio_data[23],l2b3_sio_data[25],l2b3_sio_data[27],l2b3_sio_data[29],l2b3_sio_data[31] ^ l2b3_sio_parity[1]}
      -active (($0in_rising_edge($0in_delay(l2b3_sio_ctag_vld,2))) && ($0in_delay(l2b3_sio_data[16] == 1,2)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l3_parity_odd_cycle2
*/

/*   0in odd_parity
      -var {l2b3_sio_data[1],l2b3_sio_data[3],l2b3_sio_data[5],l2b3_sio_data[7],l2b3_sio_data[9],l2b3_sio_data[11],l2b3_sio_data[13],l2b3_sio_data[15],l2b3_sio_data[17],l2b3_sio_data[19],l2b3_sio_data[21],l2b3_sio_data[23],l2b3_sio_data[25],l2b3_sio_data[27],l2b3_sio_data[29],l2b3_sio_data[31] ^ l2b3_sio_parity[1]}
      -active (($0in_rising_edge($0in_delay(l2b3_sio_ctag_vld,3))) && ($0in_delay(l2b3_sio_data[16] == 1,3)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l3_parity_odd_cycle3
*/

/*   0in odd_parity
      -var {l2b3_sio_data[1],l2b3_sio_data[3],l2b3_sio_data[5],l2b3_sio_data[7],l2b3_sio_data[9],l2b3_sio_data[11],l2b3_sio_data[13],l2b3_sio_data[15],l2b3_sio_data[17],l2b3_sio_data[19],l2b3_sio_data[21],l2b3_sio_data[23],l2b3_sio_data[25],l2b3_sio_data[27],l2b3_sio_data[29],l2b3_sio_data[31] ^ l2b3_sio_parity[1]}
      -active (($0in_rising_edge($0in_delay(l2b3_sio_ctag_vld,4))) && ($0in_delay(l2b3_sio_data[16] == 1,4)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l3_parity_odd_cycle4
*/

/*   0in odd_parity
      -var {l2b3_sio_data[1],l2b3_sio_data[3],l2b3_sio_data[5],l2b3_sio_data[7],l2b3_sio_data[9],l2b3_sio_data[11],l2b3_sio_data[13],l2b3_sio_data[15],l2b3_sio_data[17],l2b3_sio_data[19],l2b3_sio_data[21],l2b3_sio_data[23],l2b3_sio_data[25],l2b3_sio_data[27],l2b3_sio_data[29],l2b3_sio_data[31] ^ l2b3_sio_parity[1]}
      -active (($0in_rising_edge($0in_delay(l2b3_sio_ctag_vld,5))) && ($0in_delay(l2b3_sio_data[16] == 1,5)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l3_parity_odd_cycle5
*/

/*   0in odd_parity
      -var {l2b3_sio_data[1],l2b3_sio_data[3],l2b3_sio_data[5],l2b3_sio_data[7],l2b3_sio_data[9],l2b3_sio_data[11],l2b3_sio_data[13],l2b3_sio_data[15],l2b3_sio_data[17],l2b3_sio_data[19],l2b3_sio_data[21],l2b3_sio_data[23],l2b3_sio_data[25],l2b3_sio_data[27],l2b3_sio_data[29],l2b3_sio_data[31] ^ l2b3_sio_parity[1]}
      -active (($0in_rising_edge($0in_delay(l2b3_sio_ctag_vld,6))) && ($0in_delay(l2b3_sio_data[16] == 1,6)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l3_parity_odd_cycle6
*/

/*   0in odd_parity
      -var {l2b3_sio_data[1],l2b3_sio_data[3],l2b3_sio_data[5],l2b3_sio_data[7],l2b3_sio_data[9],l2b3_sio_data[11],l2b3_sio_data[13],l2b3_sio_data[15],l2b3_sio_data[17],l2b3_sio_data[19],l2b3_sio_data[21],l2b3_sio_data[23],l2b3_sio_data[25],l2b3_sio_data[27],l2b3_sio_data[29],l2b3_sio_data[31] ^ l2b3_sio_parity[1]}
      -active (($0in_rising_edge($0in_delay(l2b3_sio_ctag_vld,7))) && ($0in_delay(l2b3_sio_data[16] == 1,7)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l3_parity_odd_cycle7
*/

/*   0in odd_parity
      -var {l2b3_sio_data[1],l2b3_sio_data[3],l2b3_sio_data[5],l2b3_sio_data[7],l2b3_sio_data[9],l2b3_sio_data[11],l2b3_sio_data[13],l2b3_sio_data[15],l2b3_sio_data[17],l2b3_sio_data[19],l2b3_sio_data[21],l2b3_sio_data[23],l2b3_sio_data[25],l2b3_sio_data[27],l2b3_sio_data[29],l2b3_sio_data[31] ^ l2b3_sio_parity[1]}
      -active (($0in_rising_edge($0in_delay(l2b3_sio_ctag_vld,8))) && ($0in_delay(l2b3_sio_data[16] == 1,8)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l3_parity_odd_cycle8
*/

/*   0in odd_parity
      -var {l2b3_sio_data[1],l2b3_sio_data[3],l2b3_sio_data[5],l2b3_sio_data[7],l2b3_sio_data[9],l2b3_sio_data[11],l2b3_sio_data[13],l2b3_sio_data[15],l2b3_sio_data[17],l2b3_sio_data[19],l2b3_sio_data[21],l2b3_sio_data[23],l2b3_sio_data[25],l2b3_sio_data[27],l2b3_sio_data[29],l2b3_sio_data[31] ^ l2b3_sio_parity[1]}
      -active (($0in_rising_edge($0in_delay(l2b3_sio_ctag_vld,9))) && ($0in_delay(l2b3_sio_data[16] == 1,9)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l3_parity_odd_cycle9
*/

/*   0in odd_parity
      -var {l2b3_sio_data[1],l2b3_sio_data[3],l2b3_sio_data[5],l2b3_sio_data[7],l2b3_sio_data[9],l2b3_sio_data[11],l2b3_sio_data[13],l2b3_sio_data[15],l2b3_sio_data[17],l2b3_sio_data[19],l2b3_sio_data[21],l2b3_sio_data[23],l2b3_sio_data[25],l2b3_sio_data[27],l2b3_sio_data[29],l2b3_sio_data[31] ^ l2b3_sio_parity[1]}
      -active (($0in_rising_edge($0in_delay(l2b3_sio_ctag_vld,10))) && ($0in_delay(l2b3_sio_data[16] == 1,10)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l3_parity_odd_cycle10
*/

/*   0in odd_parity
      -var {l2b3_sio_data[1],l2b3_sio_data[3],l2b3_sio_data[5],l2b3_sio_data[7],l2b3_sio_data[9],l2b3_sio_data[11],l2b3_sio_data[13],l2b3_sio_data[15],l2b3_sio_data[17],l2b3_sio_data[19],l2b3_sio_data[21],l2b3_sio_data[23],l2b3_sio_data[25],l2b3_sio_data[27],l2b3_sio_data[29],l2b3_sio_data[31] ^ l2b3_sio_parity[1]}
      -active (($0in_rising_edge($0in_delay(l2b3_sio_ctag_vld,11))) && ($0in_delay(l2b3_sio_data[16] == 1,11)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l3_parity_odd_cycle11
*/

/*   0in odd_parity
      -var {l2b3_sio_data[1],l2b3_sio_data[3],l2b3_sio_data[5],l2b3_sio_data[7],l2b3_sio_data[9],l2b3_sio_data[11],l2b3_sio_data[13],l2b3_sio_data[15],l2b3_sio_data[17],l2b3_sio_data[19],l2b3_sio_data[21],l2b3_sio_data[23],l2b3_sio_data[25],l2b3_sio_data[27],l2b3_sio_data[29],l2b3_sio_data[31] ^ l2b3_sio_parity[1]}
      -active (($0in_rising_edge($0in_delay(l2b3_sio_ctag_vld,12))) && ($0in_delay(l2b3_sio_data[16] == 1,12)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l3_parity_odd_cycle12
*/

/*   0in odd_parity
      -var {l2b3_sio_data[1],l2b3_sio_data[3],l2b3_sio_data[5],l2b3_sio_data[7],l2b3_sio_data[9],l2b3_sio_data[11],l2b3_sio_data[13],l2b3_sio_data[15],l2b3_sio_data[17],l2b3_sio_data[19],l2b3_sio_data[21],l2b3_sio_data[23],l2b3_sio_data[25],l2b3_sio_data[27],l2b3_sio_data[29],l2b3_sio_data[31] ^ l2b3_sio_parity[1]}
      -active (($0in_rising_edge($0in_delay(l2b3_sio_ctag_vld,13))) && ($0in_delay(l2b3_sio_data[16] == 1,13)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l3_parity_odd_cycle13
*/

/*   0in odd_parity
      -var {l2b3_sio_data[1],l2b3_sio_data[3],l2b3_sio_data[5],l2b3_sio_data[7],l2b3_sio_data[9],l2b3_sio_data[11],l2b3_sio_data[13],l2b3_sio_data[15],l2b3_sio_data[17],l2b3_sio_data[19],l2b3_sio_data[21],l2b3_sio_data[23],l2b3_sio_data[25],l2b3_sio_data[27],l2b3_sio_data[29],l2b3_sio_data[31] ^ l2b3_sio_parity[1]}
      -active (($0in_rising_edge($0in_delay(l2b3_sio_ctag_vld,14))) && ($0in_delay(l2b3_sio_data[16] == 1,14)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l3_parity_odd_cycle14
*/

/*   0in odd_parity
      -var {l2b3_sio_data[1],l2b3_sio_data[3],l2b3_sio_data[5],l2b3_sio_data[7],l2b3_sio_data[9],l2b3_sio_data[11],l2b3_sio_data[13],l2b3_sio_data[15],l2b3_sio_data[17],l2b3_sio_data[19],l2b3_sio_data[21],l2b3_sio_data[23],l2b3_sio_data[25],l2b3_sio_data[27],l2b3_sio_data[29],l2b3_sio_data[31] ^ l2b3_sio_parity[1]}
      -active (($0in_rising_edge($0in_delay(l2b3_sio_ctag_vld,15))) && ($0in_delay(l2b3_sio_data[16] == 1,15)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l3_parity_odd_cycle15
*/

/*   0in odd_parity
      -var {l2b3_sio_data[1],l2b3_sio_data[3],l2b3_sio_data[5],l2b3_sio_data[7],l2b3_sio_data[9],l2b3_sio_data[11],l2b3_sio_data[13],l2b3_sio_data[15],l2b3_sio_data[17],l2b3_sio_data[19],l2b3_sio_data[21],l2b3_sio_data[23],l2b3_sio_data[25],l2b3_sio_data[27],l2b3_sio_data[29],l2b3_sio_data[31] ^ l2b3_sio_parity[1]}
      -active (($0in_rising_edge($0in_delay(l2b3_sio_ctag_vld,16))) && ($0in_delay(l2b3_sio_data[16] == 1,16)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l3_parity_odd_cycle16

*/

/*   0in odd_parity
      -var {l2b4_sio_data[0],l2b4_sio_data[2],l2b4_sio_data[4],l2b4_sio_data[6],l2b4_sio_data[8],l2b4_sio_data[10],l2b4_sio_data[12],l2b4_sio_data[14],l2b4_sio_data[16],l2b4_sio_data[18],l2b4_sio_data[20],l2b4_sio_data[22],l2b4_sio_data[24],l2b4_sio_data[26],l2b4_sio_data[28],l2b4_sio_data[30] ^ l2b4_sio_parity[0]}
      -active (($0in_rising_edge($0in_delay(l2b4_sio_ctag_vld,1))) && ($0in_delay(l2b4_sio_data[16] == 1,1)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l4_parity_even_cycle1
*/

/*   0in odd_parity
      -var {l2b4_sio_data[0],l2b4_sio_data[2],l2b4_sio_data[4],l2b4_sio_data[6],l2b4_sio_data[8],l2b4_sio_data[10],l2b4_sio_data[12],l2b4_sio_data[14],l2b4_sio_data[16],l2b4_sio_data[18],l2b4_sio_data[20],l2b4_sio_data[22],l2b4_sio_data[24],l2b4_sio_data[26],l2b4_sio_data[28],l2b4_sio_data[30] ^ l2b4_sio_parity[0]}
      -active (($0in_rising_edge($0in_delay(l2b4_sio_ctag_vld,2))) && ($0in_delay(l2b4_sio_data[16] == 1,2)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l4_parity_even_cycle2
*/

/*   0in odd_parity
      -var {l2b4_sio_data[0],l2b4_sio_data[2],l2b4_sio_data[4],l2b4_sio_data[6],l2b4_sio_data[8],l2b4_sio_data[10],l2b4_sio_data[12],l2b4_sio_data[14],l2b4_sio_data[16],l2b4_sio_data[18],l2b4_sio_data[20],l2b4_sio_data[22],l2b4_sio_data[24],l2b4_sio_data[26],l2b4_sio_data[28],l2b4_sio_data[30] ^ l2b4_sio_parity[0]}
      -active (($0in_rising_edge($0in_delay(l2b4_sio_ctag_vld,3))) && ($0in_delay(l2b4_sio_data[16] == 1,3)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l4_parity_even_cycle3
*/

/*   0in odd_parity
      -var {l2b4_sio_data[0],l2b4_sio_data[2],l2b4_sio_data[4],l2b4_sio_data[6],l2b4_sio_data[8],l2b4_sio_data[10],l2b4_sio_data[12],l2b4_sio_data[14],l2b4_sio_data[16],l2b4_sio_data[18],l2b4_sio_data[20],l2b4_sio_data[22],l2b4_sio_data[24],l2b4_sio_data[26],l2b4_sio_data[28],l2b4_sio_data[30] ^ l2b4_sio_parity[0]}
      -active (($0in_rising_edge($0in_delay(l2b4_sio_ctag_vld,4))) && ($0in_delay(l2b4_sio_data[16] == 1,4)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l4_parity_even_cycle4
*/

/*   0in odd_parity
      -var {l2b4_sio_data[0],l2b4_sio_data[2],l2b4_sio_data[4],l2b4_sio_data[6],l2b4_sio_data[8],l2b4_sio_data[10],l2b4_sio_data[12],l2b4_sio_data[14],l2b4_sio_data[16],l2b4_sio_data[18],l2b4_sio_data[20],l2b4_sio_data[22],l2b4_sio_data[24],l2b4_sio_data[26],l2b4_sio_data[28],l2b4_sio_data[30] ^ l2b4_sio_parity[0]}
      -active (($0in_rising_edge($0in_delay(l2b4_sio_ctag_vld,5))) && ($0in_delay(l2b4_sio_data[16] == 1,5)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l4_parity_even_cycle5
*/

/*   0in odd_parity
      -var {l2b4_sio_data[0],l2b4_sio_data[2],l2b4_sio_data[4],l2b4_sio_data[6],l2b4_sio_data[8],l2b4_sio_data[10],l2b4_sio_data[12],l2b4_sio_data[14],l2b4_sio_data[16],l2b4_sio_data[18],l2b4_sio_data[20],l2b4_sio_data[22],l2b4_sio_data[24],l2b4_sio_data[26],l2b4_sio_data[28],l2b4_sio_data[30] ^ l2b4_sio_parity[0]}
      -active (($0in_rising_edge($0in_delay(l2b4_sio_ctag_vld,6))) && ($0in_delay(l2b4_sio_data[16] == 1,6)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l4_parity_even_cycle6
*/

/*   0in odd_parity
      -var {l2b4_sio_data[0],l2b4_sio_data[2],l2b4_sio_data[4],l2b4_sio_data[6],l2b4_sio_data[8],l2b4_sio_data[10],l2b4_sio_data[12],l2b4_sio_data[14],l2b4_sio_data[16],l2b4_sio_data[18],l2b4_sio_data[20],l2b4_sio_data[22],l2b4_sio_data[24],l2b4_sio_data[26],l2b4_sio_data[28],l2b4_sio_data[30] ^ l2b4_sio_parity[0]}
      -active (($0in_rising_edge($0in_delay(l2b4_sio_ctag_vld,7))) && ($0in_delay(l2b4_sio_data[16] == 1,7)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l4_parity_even_cycle7
*/

/*   0in odd_parity
      -var {l2b4_sio_data[0],l2b4_sio_data[2],l2b4_sio_data[4],l2b4_sio_data[6],l2b4_sio_data[8],l2b4_sio_data[10],l2b4_sio_data[12],l2b4_sio_data[14],l2b4_sio_data[16],l2b4_sio_data[18],l2b4_sio_data[20],l2b4_sio_data[22],l2b4_sio_data[24],l2b4_sio_data[26],l2b4_sio_data[28],l2b4_sio_data[30] ^ l2b4_sio_parity[0]}
      -active (($0in_rising_edge($0in_delay(l2b4_sio_ctag_vld,8))) && ($0in_delay(l2b4_sio_data[16] == 1,8)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l4_parity_even_cycle8
*/

/*   0in odd_parity
      -var {l2b4_sio_data[0],l2b4_sio_data[2],l2b4_sio_data[4],l2b4_sio_data[6],l2b4_sio_data[8],l2b4_sio_data[10],l2b4_sio_data[12],l2b4_sio_data[14],l2b4_sio_data[16],l2b4_sio_data[18],l2b4_sio_data[20],l2b4_sio_data[22],l2b4_sio_data[24],l2b4_sio_data[26],l2b4_sio_data[28],l2b4_sio_data[30] ^ l2b4_sio_parity[0]}
      -active (($0in_rising_edge($0in_delay(l2b4_sio_ctag_vld,9))) && ($0in_delay(l2b4_sio_data[16] == 1,9)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l4_parity_even_cycle9
*/

/*   0in odd_parity
      -var {l2b4_sio_data[0],l2b4_sio_data[2],l2b4_sio_data[4],l2b4_sio_data[6],l2b4_sio_data[8],l2b4_sio_data[10],l2b4_sio_data[12],l2b4_sio_data[14],l2b4_sio_data[16],l2b4_sio_data[18],l2b4_sio_data[20],l2b4_sio_data[22],l2b4_sio_data[24],l2b4_sio_data[26],l2b4_sio_data[28],l2b4_sio_data[30] ^ l2b4_sio_parity[0]}
      -active (($0in_rising_edge($0in_delay(l2b4_sio_ctag_vld,10))) && ($0in_delay(l2b4_sio_data[16] == 1,10)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l4_parity_even_cycle10
*/

/*   0in odd_parity
      -var {l2b4_sio_data[0],l2b4_sio_data[2],l2b4_sio_data[4],l2b4_sio_data[6],l2b4_sio_data[8],l2b4_sio_data[10],l2b4_sio_data[12],l2b4_sio_data[14],l2b4_sio_data[16],l2b4_sio_data[18],l2b4_sio_data[20],l2b4_sio_data[22],l2b4_sio_data[24],l2b4_sio_data[26],l2b4_sio_data[28],l2b4_sio_data[30] ^ l2b4_sio_parity[0]}
      -active (($0in_rising_edge($0in_delay(l2b4_sio_ctag_vld,11))) && ($0in_delay(l2b4_sio_data[16] == 1,11)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l4_parity_even_cycle11
*/

/*   0in odd_parity
      -var {l2b4_sio_data[0],l2b4_sio_data[2],l2b4_sio_data[4],l2b4_sio_data[6],l2b4_sio_data[8],l2b4_sio_data[10],l2b4_sio_data[12],l2b4_sio_data[14],l2b4_sio_data[16],l2b4_sio_data[18],l2b4_sio_data[20],l2b4_sio_data[22],l2b4_sio_data[24],l2b4_sio_data[26],l2b4_sio_data[28],l2b4_sio_data[30] ^ l2b4_sio_parity[0]}
      -active (($0in_rising_edge($0in_delay(l2b4_sio_ctag_vld,12))) && ($0in_delay(l2b4_sio_data[16] == 1,12)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l4_parity_even_cycle12
*/

/*   0in odd_parity
      -var {l2b4_sio_data[0],l2b4_sio_data[2],l2b4_sio_data[4],l2b4_sio_data[6],l2b4_sio_data[8],l2b4_sio_data[10],l2b4_sio_data[12],l2b4_sio_data[14],l2b4_sio_data[16],l2b4_sio_data[18],l2b4_sio_data[20],l2b4_sio_data[22],l2b4_sio_data[24],l2b4_sio_data[26],l2b4_sio_data[28],l2b4_sio_data[30] ^ l2b4_sio_parity[0]}
      -active (($0in_rising_edge($0in_delay(l2b4_sio_ctag_vld,13))) && ($0in_delay(l2b4_sio_data[16] == 1,13)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l4_parity_even_cycle13
*/

/*   0in odd_parity
      -var {l2b4_sio_data[0],l2b4_sio_data[2],l2b4_sio_data[4],l2b4_sio_data[6],l2b4_sio_data[8],l2b4_sio_data[10],l2b4_sio_data[12],l2b4_sio_data[14],l2b4_sio_data[16],l2b4_sio_data[18],l2b4_sio_data[20],l2b4_sio_data[22],l2b4_sio_data[24],l2b4_sio_data[26],l2b4_sio_data[28],l2b4_sio_data[30] ^ l2b4_sio_parity[0]}
      -active (($0in_rising_edge($0in_delay(l2b4_sio_ctag_vld,14))) && ($0in_delay(l2b4_sio_data[16] == 1,14)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l4_parity_even_cycle14
*/

/*   0in odd_parity
      -var {l2b4_sio_data[0],l2b4_sio_data[2],l2b4_sio_data[4],l2b4_sio_data[6],l2b4_sio_data[8],l2b4_sio_data[10],l2b4_sio_data[12],l2b4_sio_data[14],l2b4_sio_data[16],l2b4_sio_data[18],l2b4_sio_data[20],l2b4_sio_data[22],l2b4_sio_data[24],l2b4_sio_data[26],l2b4_sio_data[28],l2b4_sio_data[30] ^ l2b4_sio_parity[0]}
      -active (($0in_rising_edge($0in_delay(l2b4_sio_ctag_vld,15))) && ($0in_delay(l2b4_sio_data[16] == 1,15)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l4_parity_even_cycle15
*/

/*   0in odd_parity
      -var {l2b4_sio_data[0],l2b4_sio_data[2],l2b4_sio_data[4],l2b4_sio_data[6],l2b4_sio_data[8],l2b4_sio_data[10],l2b4_sio_data[12],l2b4_sio_data[14],l2b4_sio_data[16],l2b4_sio_data[18],l2b4_sio_data[20],l2b4_sio_data[22],l2b4_sio_data[24],l2b4_sio_data[26],l2b4_sio_data[28],l2b4_sio_data[30] ^ l2b4_sio_parity[0]}
      -active (($0in_rising_edge($0in_delay(l2b4_sio_ctag_vld,16))) && ($0in_delay(l2b4_sio_data[16] == 1,16)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l4_parity_even_cycle16
*/

/*   0in odd_parity
      -var {l2b4_sio_data[1],l2b4_sio_data[3],l2b4_sio_data[5],l2b4_sio_data[7],l2b4_sio_data[9],l2b4_sio_data[11],l2b4_sio_data[13],l2b4_sio_data[15],l2b4_sio_data[17],l2b4_sio_data[19],l2b4_sio_data[21],l2b4_sio_data[23],l2b4_sio_data[25],l2b4_sio_data[27],l2b4_sio_data[29],l2b4_sio_data[31] ^ l2b4_sio_parity[1]}
      -active (($0in_rising_edge($0in_delay(l2b4_sio_ctag_vld,1))) && ($0in_delay(l2b4_sio_data[16] == 1,1)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l4_parity_odd_cycle1
*/

/*   0in odd_parity
      -var {l2b4_sio_data[1],l2b4_sio_data[3],l2b4_sio_data[5],l2b4_sio_data[7],l2b4_sio_data[9],l2b4_sio_data[11],l2b4_sio_data[13],l2b4_sio_data[15],l2b4_sio_data[17],l2b4_sio_data[19],l2b4_sio_data[21],l2b4_sio_data[23],l2b4_sio_data[25],l2b4_sio_data[27],l2b4_sio_data[29],l2b4_sio_data[31] ^ l2b4_sio_parity[1]}
      -active (($0in_rising_edge($0in_delay(l2b4_sio_ctag_vld,2))) && ($0in_delay(l2b4_sio_data[16] == 1,2)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l4_parity_odd_cycle2
*/

/*   0in odd_parity
      -var {l2b4_sio_data[1],l2b4_sio_data[3],l2b4_sio_data[5],l2b4_sio_data[7],l2b4_sio_data[9],l2b4_sio_data[11],l2b4_sio_data[13],l2b4_sio_data[15],l2b4_sio_data[17],l2b4_sio_data[19],l2b4_sio_data[21],l2b4_sio_data[23],l2b4_sio_data[25],l2b4_sio_data[27],l2b4_sio_data[29],l2b4_sio_data[31] ^ l2b4_sio_parity[1]}
      -active (($0in_rising_edge($0in_delay(l2b4_sio_ctag_vld,3))) && ($0in_delay(l2b4_sio_data[16] == 1,3)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l4_parity_odd_cycle3
*/

/*   0in odd_parity
      -var {l2b4_sio_data[1],l2b4_sio_data[3],l2b4_sio_data[5],l2b4_sio_data[7],l2b4_sio_data[9],l2b4_sio_data[11],l2b4_sio_data[13],l2b4_sio_data[15],l2b4_sio_data[17],l2b4_sio_data[19],l2b4_sio_data[21],l2b4_sio_data[23],l2b4_sio_data[25],l2b4_sio_data[27],l2b4_sio_data[29],l2b4_sio_data[31] ^ l2b4_sio_parity[1]}
      -active (($0in_rising_edge($0in_delay(l2b4_sio_ctag_vld,4))) && ($0in_delay(l2b4_sio_data[16] == 1,4)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l4_parity_odd_cycle4
*/

/*   0in odd_parity
      -var {l2b4_sio_data[1],l2b4_sio_data[3],l2b4_sio_data[5],l2b4_sio_data[7],l2b4_sio_data[9],l2b4_sio_data[11],l2b4_sio_data[13],l2b4_sio_data[15],l2b4_sio_data[17],l2b4_sio_data[19],l2b4_sio_data[21],l2b4_sio_data[23],l2b4_sio_data[25],l2b4_sio_data[27],l2b4_sio_data[29],l2b4_sio_data[31] ^ l2b4_sio_parity[1]}
      -active (($0in_rising_edge($0in_delay(l2b4_sio_ctag_vld,5))) && ($0in_delay(l2b4_sio_data[16] == 1,5)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l4_parity_odd_cycle5
*/

/*   0in odd_parity
      -var {l2b4_sio_data[1],l2b4_sio_data[3],l2b4_sio_data[5],l2b4_sio_data[7],l2b4_sio_data[9],l2b4_sio_data[11],l2b4_sio_data[13],l2b4_sio_data[15],l2b4_sio_data[17],l2b4_sio_data[19],l2b4_sio_data[21],l2b4_sio_data[23],l2b4_sio_data[25],l2b4_sio_data[27],l2b4_sio_data[29],l2b4_sio_data[31] ^ l2b4_sio_parity[1]}
      -active (($0in_rising_edge($0in_delay(l2b4_sio_ctag_vld,6))) && ($0in_delay(l2b4_sio_data[16] == 1,6)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l4_parity_odd_cycle6
*/

/*   0in odd_parity
      -var {l2b4_sio_data[1],l2b4_sio_data[3],l2b4_sio_data[5],l2b4_sio_data[7],l2b4_sio_data[9],l2b4_sio_data[11],l2b4_sio_data[13],l2b4_sio_data[15],l2b4_sio_data[17],l2b4_sio_data[19],l2b4_sio_data[21],l2b4_sio_data[23],l2b4_sio_data[25],l2b4_sio_data[27],l2b4_sio_data[29],l2b4_sio_data[31] ^ l2b4_sio_parity[1]}
      -active (($0in_rising_edge($0in_delay(l2b4_sio_ctag_vld,7))) && ($0in_delay(l2b4_sio_data[16] == 1,7)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l4_parity_odd_cycle7
*/

/*   0in odd_parity
      -var {l2b4_sio_data[1],l2b4_sio_data[3],l2b4_sio_data[5],l2b4_sio_data[7],l2b4_sio_data[9],l2b4_sio_data[11],l2b4_sio_data[13],l2b4_sio_data[15],l2b4_sio_data[17],l2b4_sio_data[19],l2b4_sio_data[21],l2b4_sio_data[23],l2b4_sio_data[25],l2b4_sio_data[27],l2b4_sio_data[29],l2b4_sio_data[31] ^ l2b4_sio_parity[1]}
      -active (($0in_rising_edge($0in_delay(l2b4_sio_ctag_vld,8))) && ($0in_delay(l2b4_sio_data[16] == 1,8)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l4_parity_odd_cycle8
*/

/*   0in odd_parity
      -var {l2b4_sio_data[1],l2b4_sio_data[3],l2b4_sio_data[5],l2b4_sio_data[7],l2b4_sio_data[9],l2b4_sio_data[11],l2b4_sio_data[13],l2b4_sio_data[15],l2b4_sio_data[17],l2b4_sio_data[19],l2b4_sio_data[21],l2b4_sio_data[23],l2b4_sio_data[25],l2b4_sio_data[27],l2b4_sio_data[29],l2b4_sio_data[31] ^ l2b4_sio_parity[1]}
      -active (($0in_rising_edge($0in_delay(l2b4_sio_ctag_vld,9))) && ($0in_delay(l2b4_sio_data[16] == 1,9)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l4_parity_odd_cycle9
*/

/*   0in odd_parity
      -var {l2b4_sio_data[1],l2b4_sio_data[3],l2b4_sio_data[5],l2b4_sio_data[7],l2b4_sio_data[9],l2b4_sio_data[11],l2b4_sio_data[13],l2b4_sio_data[15],l2b4_sio_data[17],l2b4_sio_data[19],l2b4_sio_data[21],l2b4_sio_data[23],l2b4_sio_data[25],l2b4_sio_data[27],l2b4_sio_data[29],l2b4_sio_data[31] ^ l2b4_sio_parity[1]}
      -active (($0in_rising_edge($0in_delay(l2b4_sio_ctag_vld,10))) && ($0in_delay(l2b4_sio_data[16] == 1,10)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l4_parity_odd_cycle10
*/

/*   0in odd_parity
      -var {l2b4_sio_data[1],l2b4_sio_data[3],l2b4_sio_data[5],l2b4_sio_data[7],l2b4_sio_data[9],l2b4_sio_data[11],l2b4_sio_data[13],l2b4_sio_data[15],l2b4_sio_data[17],l2b4_sio_data[19],l2b4_sio_data[21],l2b4_sio_data[23],l2b4_sio_data[25],l2b4_sio_data[27],l2b4_sio_data[29],l2b4_sio_data[31] ^ l2b4_sio_parity[1]}
      -active (($0in_rising_edge($0in_delay(l2b4_sio_ctag_vld,11))) && ($0in_delay(l2b4_sio_data[16] == 1,11)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l4_parity_odd_cycle11
*/

/*   0in odd_parity
      -var {l2b4_sio_data[1],l2b4_sio_data[3],l2b4_sio_data[5],l2b4_sio_data[7],l2b4_sio_data[9],l2b4_sio_data[11],l2b4_sio_data[13],l2b4_sio_data[15],l2b4_sio_data[17],l2b4_sio_data[19],l2b4_sio_data[21],l2b4_sio_data[23],l2b4_sio_data[25],l2b4_sio_data[27],l2b4_sio_data[29],l2b4_sio_data[31] ^ l2b4_sio_parity[1]}
      -active (($0in_rising_edge($0in_delay(l2b4_sio_ctag_vld,12))) && ($0in_delay(l2b4_sio_data[16] == 1,12)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l4_parity_odd_cycle12
*/

/*   0in odd_parity
      -var {l2b4_sio_data[1],l2b4_sio_data[3],l2b4_sio_data[5],l2b4_sio_data[7],l2b4_sio_data[9],l2b4_sio_data[11],l2b4_sio_data[13],l2b4_sio_data[15],l2b4_sio_data[17],l2b4_sio_data[19],l2b4_sio_data[21],l2b4_sio_data[23],l2b4_sio_data[25],l2b4_sio_data[27],l2b4_sio_data[29],l2b4_sio_data[31] ^ l2b4_sio_parity[1]}
      -active (($0in_rising_edge($0in_delay(l2b4_sio_ctag_vld,13))) && ($0in_delay(l2b4_sio_data[16] == 1,13)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l4_parity_odd_cycle13
*/

/*   0in odd_parity
      -var {l2b4_sio_data[1],l2b4_sio_data[3],l2b4_sio_data[5],l2b4_sio_data[7],l2b4_sio_data[9],l2b4_sio_data[11],l2b4_sio_data[13],l2b4_sio_data[15],l2b4_sio_data[17],l2b4_sio_data[19],l2b4_sio_data[21],l2b4_sio_data[23],l2b4_sio_data[25],l2b4_sio_data[27],l2b4_sio_data[29],l2b4_sio_data[31] ^ l2b4_sio_parity[1]}
      -active (($0in_rising_edge($0in_delay(l2b4_sio_ctag_vld,14))) && ($0in_delay(l2b4_sio_data[16] == 1,14)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l4_parity_odd_cycle14
*/

/*   0in odd_parity
      -var {l2b4_sio_data[1],l2b4_sio_data[3],l2b4_sio_data[5],l2b4_sio_data[7],l2b4_sio_data[9],l2b4_sio_data[11],l2b4_sio_data[13],l2b4_sio_data[15],l2b4_sio_data[17],l2b4_sio_data[19],l2b4_sio_data[21],l2b4_sio_data[23],l2b4_sio_data[25],l2b4_sio_data[27],l2b4_sio_data[29],l2b4_sio_data[31] ^ l2b4_sio_parity[1]}
      -active (($0in_rising_edge($0in_delay(l2b4_sio_ctag_vld,15))) && ($0in_delay(l2b4_sio_data[16] == 1,15)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l4_parity_odd_cycle15
*/

/*   0in odd_parity
      -var {l2b4_sio_data[1],l2b4_sio_data[3],l2b4_sio_data[5],l2b4_sio_data[7],l2b4_sio_data[9],l2b4_sio_data[11],l2b4_sio_data[13],l2b4_sio_data[15],l2b4_sio_data[17],l2b4_sio_data[19],l2b4_sio_data[21],l2b4_sio_data[23],l2b4_sio_data[25],l2b4_sio_data[27],l2b4_sio_data[29],l2b4_sio_data[31] ^ l2b4_sio_parity[1]}
      -active (($0in_rising_edge($0in_delay(l2b4_sio_ctag_vld,16))) && ($0in_delay(l2b4_sio_data[16] == 1,16)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l4_parity_odd_cycle16
*/

/*   0in odd_parity
      -var {l2b5_sio_data[0],l2b5_sio_data[2],l2b5_sio_data[4],l2b5_sio_data[6],l2b5_sio_data[8],l2b5_sio_data[10],l2b5_sio_data[12],l2b5_sio_data[14],l2b5_sio_data[16],l2b5_sio_data[18],l2b5_sio_data[20],l2b5_sio_data[22],l2b5_sio_data[24],l2b5_sio_data[26],l2b5_sio_data[28],l2b5_sio_data[30] ^ l2b5_sio_parity[0]}
      -active (($0in_rising_edge($0in_delay(l2b5_sio_ctag_vld,1))) && ($0in_delay(l2b5_sio_data[16] == 1,1)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l5_parity_even_cycle1
*/

/*   0in odd_parity
      -var {l2b5_sio_data[0],l2b5_sio_data[2],l2b5_sio_data[4],l2b5_sio_data[6],l2b5_sio_data[8],l2b5_sio_data[10],l2b5_sio_data[12],l2b5_sio_data[14],l2b5_sio_data[16],l2b5_sio_data[18],l2b5_sio_data[20],l2b5_sio_data[22],l2b5_sio_data[24],l2b5_sio_data[26],l2b5_sio_data[28],l2b5_sio_data[30] ^ l2b5_sio_parity[0]}
      -active (($0in_rising_edge($0in_delay(l2b5_sio_ctag_vld,2))) && ($0in_delay(l2b5_sio_data[16] == 1,2)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l5_parity_even_cycle2
*/

/*   0in odd_parity
      -var {l2b5_sio_data[0],l2b5_sio_data[2],l2b5_sio_data[4],l2b5_sio_data[6],l2b5_sio_data[8],l2b5_sio_data[10],l2b5_sio_data[12],l2b5_sio_data[14],l2b5_sio_data[16],l2b5_sio_data[18],l2b5_sio_data[20],l2b5_sio_data[22],l2b5_sio_data[24],l2b5_sio_data[26],l2b5_sio_data[28],l2b5_sio_data[30] ^ l2b5_sio_parity[0]}
      -active (($0in_rising_edge($0in_delay(l2b5_sio_ctag_vld,3))) && ($0in_delay(l2b5_sio_data[16] == 1,3)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l5_parity_even_cycle3
*/

/*   0in odd_parity
      -var {l2b5_sio_data[0],l2b5_sio_data[2],l2b5_sio_data[4],l2b5_sio_data[6],l2b5_sio_data[8],l2b5_sio_data[10],l2b5_sio_data[12],l2b5_sio_data[14],l2b5_sio_data[16],l2b5_sio_data[18],l2b5_sio_data[20],l2b5_sio_data[22],l2b5_sio_data[24],l2b5_sio_data[26],l2b5_sio_data[28],l2b5_sio_data[30] ^ l2b5_sio_parity[0]}
      -active (($0in_rising_edge($0in_delay(l2b5_sio_ctag_vld,4))) && ($0in_delay(l2b5_sio_data[16] == 1,4)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l5_parity_even_cycle4
*/

/*   0in odd_parity
      -var {l2b5_sio_data[0],l2b5_sio_data[2],l2b5_sio_data[4],l2b5_sio_data[6],l2b5_sio_data[8],l2b5_sio_data[10],l2b5_sio_data[12],l2b5_sio_data[14],l2b5_sio_data[16],l2b5_sio_data[18],l2b5_sio_data[20],l2b5_sio_data[22],l2b5_sio_data[24],l2b5_sio_data[26],l2b5_sio_data[28],l2b5_sio_data[30] ^ l2b5_sio_parity[0]}
      -active (($0in_rising_edge($0in_delay(l2b5_sio_ctag_vld,5))) && ($0in_delay(l2b5_sio_data[16] == 1,5)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l5_parity_even_cycle5
*/

/*   0in odd_parity
      -var {l2b5_sio_data[0],l2b5_sio_data[2],l2b5_sio_data[4],l2b5_sio_data[6],l2b5_sio_data[8],l2b5_sio_data[10],l2b5_sio_data[12],l2b5_sio_data[14],l2b5_sio_data[16],l2b5_sio_data[18],l2b5_sio_data[20],l2b5_sio_data[22],l2b5_sio_data[24],l2b5_sio_data[26],l2b5_sio_data[28],l2b5_sio_data[30] ^ l2b5_sio_parity[0]}
      -active (($0in_rising_edge($0in_delay(l2b5_sio_ctag_vld,6))) && ($0in_delay(l2b5_sio_data[16] == 1,6)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l5_parity_even_cycle6
*/

/*   0in odd_parity
      -var {l2b5_sio_data[0],l2b5_sio_data[2],l2b5_sio_data[4],l2b5_sio_data[6],l2b5_sio_data[8],l2b5_sio_data[10],l2b5_sio_data[12],l2b5_sio_data[14],l2b5_sio_data[16],l2b5_sio_data[18],l2b5_sio_data[20],l2b5_sio_data[22],l2b5_sio_data[24],l2b5_sio_data[26],l2b5_sio_data[28],l2b5_sio_data[30] ^ l2b5_sio_parity[0]}
      -active (($0in_rising_edge($0in_delay(l2b5_sio_ctag_vld,7))) && ($0in_delay(l2b5_sio_data[16] == 1,7)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l5_parity_even_cycle7
*/

/*   0in odd_parity
      -var {l2b5_sio_data[0],l2b5_sio_data[2],l2b5_sio_data[4],l2b5_sio_data[6],l2b5_sio_data[8],l2b5_sio_data[10],l2b5_sio_data[12],l2b5_sio_data[14],l2b5_sio_data[16],l2b5_sio_data[18],l2b5_sio_data[20],l2b5_sio_data[22],l2b5_sio_data[24],l2b5_sio_data[26],l2b5_sio_data[28],l2b5_sio_data[30] ^ l2b5_sio_parity[0]}
      -active (($0in_rising_edge($0in_delay(l2b5_sio_ctag_vld,8))) && ($0in_delay(l2b5_sio_data[16] == 1,8)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l5_parity_even_cycle8
*/

/*   0in odd_parity
      -var {l2b5_sio_data[0],l2b5_sio_data[2],l2b5_sio_data[4],l2b5_sio_data[6],l2b5_sio_data[8],l2b5_sio_data[10],l2b5_sio_data[12],l2b5_sio_data[14],l2b5_sio_data[16],l2b5_sio_data[18],l2b5_sio_data[20],l2b5_sio_data[22],l2b5_sio_data[24],l2b5_sio_data[26],l2b5_sio_data[28],l2b5_sio_data[30] ^ l2b5_sio_parity[0]}
      -active (($0in_rising_edge($0in_delay(l2b5_sio_ctag_vld,9))) && ($0in_delay(l2b5_sio_data[16] == 1,9)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l5_parity_even_cycle9
*/

/*   0in odd_parity
      -var {l2b5_sio_data[0],l2b5_sio_data[2],l2b5_sio_data[4],l2b5_sio_data[6],l2b5_sio_data[8],l2b5_sio_data[10],l2b5_sio_data[12],l2b5_sio_data[14],l2b5_sio_data[16],l2b5_sio_data[18],l2b5_sio_data[20],l2b5_sio_data[22],l2b5_sio_data[24],l2b5_sio_data[26],l2b5_sio_data[28],l2b5_sio_data[30] ^ l2b5_sio_parity[0]}
      -active (($0in_rising_edge($0in_delay(l2b5_sio_ctag_vld,10))) && ($0in_delay(l2b5_sio_data[16] == 1,10)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l5_parity_even_cycle10
*/

/*   0in odd_parity
      -var {l2b5_sio_data[0],l2b5_sio_data[2],l2b5_sio_data[4],l2b5_sio_data[6],l2b5_sio_data[8],l2b5_sio_data[10],l2b5_sio_data[12],l2b5_sio_data[14],l2b5_sio_data[16],l2b5_sio_data[18],l2b5_sio_data[20],l2b5_sio_data[22],l2b5_sio_data[24],l2b5_sio_data[26],l2b5_sio_data[28],l2b5_sio_data[30] ^ l2b5_sio_parity[0]}
      -active (($0in_rising_edge($0in_delay(l2b5_sio_ctag_vld,11))) && ($0in_delay(l2b5_sio_data[16] == 1,11)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l5_parity_even_cycle11
*/

/*   0in odd_parity
      -var {l2b5_sio_data[0],l2b5_sio_data[2],l2b5_sio_data[4],l2b5_sio_data[6],l2b5_sio_data[8],l2b5_sio_data[10],l2b5_sio_data[12],l2b5_sio_data[14],l2b5_sio_data[16],l2b5_sio_data[18],l2b5_sio_data[20],l2b5_sio_data[22],l2b5_sio_data[24],l2b5_sio_data[26],l2b5_sio_data[28],l2b5_sio_data[30] ^ l2b5_sio_parity[0]}
      -active (($0in_rising_edge($0in_delay(l2b5_sio_ctag_vld,12))) && ($0in_delay(l2b5_sio_data[16] == 1,12)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l5_parity_even_cycle12
*/

/*   0in odd_parity
      -var {l2b5_sio_data[0],l2b5_sio_data[2],l2b5_sio_data[4],l2b5_sio_data[6],l2b5_sio_data[8],l2b5_sio_data[10],l2b5_sio_data[12],l2b5_sio_data[14],l2b5_sio_data[16],l2b5_sio_data[18],l2b5_sio_data[20],l2b5_sio_data[22],l2b5_sio_data[24],l2b5_sio_data[26],l2b5_sio_data[28],l2b5_sio_data[30] ^ l2b5_sio_parity[0]}
      -active (($0in_rising_edge($0in_delay(l2b5_sio_ctag_vld,13))) && ($0in_delay(l2b5_sio_data[16] == 1,13)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l5_parity_even_cycle13
*/

/*   0in odd_parity
      -var {l2b5_sio_data[0],l2b5_sio_data[2],l2b5_sio_data[4],l2b5_sio_data[6],l2b5_sio_data[8],l2b5_sio_data[10],l2b5_sio_data[12],l2b5_sio_data[14],l2b5_sio_data[16],l2b5_sio_data[18],l2b5_sio_data[20],l2b5_sio_data[22],l2b5_sio_data[24],l2b5_sio_data[26],l2b5_sio_data[28],l2b5_sio_data[30] ^ l2b5_sio_parity[0]}
      -active (($0in_rising_edge($0in_delay(l2b5_sio_ctag_vld,14))) && ($0in_delay(l2b5_sio_data[16] == 1,14)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l5_parity_even_cycle14
*/

/*   0in odd_parity
      -var {l2b5_sio_data[0],l2b5_sio_data[2],l2b5_sio_data[4],l2b5_sio_data[6],l2b5_sio_data[8],l2b5_sio_data[10],l2b5_sio_data[12],l2b5_sio_data[14],l2b5_sio_data[16],l2b5_sio_data[18],l2b5_sio_data[20],l2b5_sio_data[22],l2b5_sio_data[24],l2b5_sio_data[26],l2b5_sio_data[28],l2b5_sio_data[30] ^ l2b5_sio_parity[0]}
      -active (($0in_rising_edge($0in_delay(l2b5_sio_ctag_vld,15))) && ($0in_delay(l2b5_sio_data[16] == 1,15)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l5_parity_even_cycle15
*/

/*   0in odd_parity
      -var {l2b5_sio_data[0],l2b5_sio_data[2],l2b5_sio_data[4],l2b5_sio_data[6],l2b5_sio_data[8],l2b5_sio_data[10],l2b5_sio_data[12],l2b5_sio_data[14],l2b5_sio_data[16],l2b5_sio_data[18],l2b5_sio_data[20],l2b5_sio_data[22],l2b5_sio_data[24],l2b5_sio_data[26],l2b5_sio_data[28],l2b5_sio_data[30] ^ l2b5_sio_parity[0]}
      -active (($0in_rising_edge($0in_delay(l2b5_sio_ctag_vld,16))) && ($0in_delay(l2b5_sio_data[16] == 1,16)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l5_parity_even_cycle16
*/

/*   0in odd_parity
      -var {l2b5_sio_data[1],l2b5_sio_data[3],l2b5_sio_data[5],l2b5_sio_data[7],l2b5_sio_data[9],l2b5_sio_data[11],l2b5_sio_data[13],l2b5_sio_data[15],l2b5_sio_data[17],l2b5_sio_data[19],l2b5_sio_data[21],l2b5_sio_data[23],l2b5_sio_data[25],l2b5_sio_data[27],l2b5_sio_data[29],l2b5_sio_data[31] ^ l2b5_sio_parity[1]}
      -active (($0in_rising_edge($0in_delay(l2b5_sio_ctag_vld,1))) && ($0in_delay(l2b5_sio_data[16] == 1,1)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l5_parity_odd_cycle1
*/

/*   0in odd_parity
      -var {l2b5_sio_data[1],l2b5_sio_data[3],l2b5_sio_data[5],l2b5_sio_data[7],l2b5_sio_data[9],l2b5_sio_data[11],l2b5_sio_data[13],l2b5_sio_data[15],l2b5_sio_data[17],l2b5_sio_data[19],l2b5_sio_data[21],l2b5_sio_data[23],l2b5_sio_data[25],l2b5_sio_data[27],l2b5_sio_data[29],l2b5_sio_data[31] ^ l2b5_sio_parity[1]}
      -active (($0in_rising_edge($0in_delay(l2b5_sio_ctag_vld,2))) && ($0in_delay(l2b5_sio_data[16] == 1,2)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l5_parity_odd_cycle2
*/

/*   0in odd_parity
      -var {l2b5_sio_data[1],l2b5_sio_data[3],l2b5_sio_data[5],l2b5_sio_data[7],l2b5_sio_data[9],l2b5_sio_data[11],l2b5_sio_data[13],l2b5_sio_data[15],l2b5_sio_data[17],l2b5_sio_data[19],l2b5_sio_data[21],l2b5_sio_data[23],l2b5_sio_data[25],l2b5_sio_data[27],l2b5_sio_data[29],l2b5_sio_data[31] ^ l2b5_sio_parity[1]}
      -active (($0in_rising_edge($0in_delay(l2b5_sio_ctag_vld,3))) && ($0in_delay(l2b5_sio_data[16] == 1,3)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l5_parity_odd_cycle3
*/

/*   0in odd_parity
      -var {l2b5_sio_data[1],l2b5_sio_data[3],l2b5_sio_data[5],l2b5_sio_data[7],l2b5_sio_data[9],l2b5_sio_data[11],l2b5_sio_data[13],l2b5_sio_data[15],l2b5_sio_data[17],l2b5_sio_data[19],l2b5_sio_data[21],l2b5_sio_data[23],l2b5_sio_data[25],l2b5_sio_data[27],l2b5_sio_data[29],l2b5_sio_data[31] ^ l2b5_sio_parity[1]}
      -active (($0in_rising_edge($0in_delay(l2b5_sio_ctag_vld,4))) && ($0in_delay(l2b5_sio_data[16] == 1,4)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l5_parity_odd_cycle4
*/

/*   0in odd_parity
      -var {l2b5_sio_data[1],l2b5_sio_data[3],l2b5_sio_data[5],l2b5_sio_data[7],l2b5_sio_data[9],l2b5_sio_data[11],l2b5_sio_data[13],l2b5_sio_data[15],l2b5_sio_data[17],l2b5_sio_data[19],l2b5_sio_data[21],l2b5_sio_data[23],l2b5_sio_data[25],l2b5_sio_data[27],l2b5_sio_data[29],l2b5_sio_data[31] ^ l2b5_sio_parity[1]}
      -active (($0in_rising_edge($0in_delay(l2b5_sio_ctag_vld,5))) && ($0in_delay(l2b5_sio_data[16] == 1,5)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l5_parity_odd_cycle5
*/

/*   0in odd_parity
      -var {l2b5_sio_data[1],l2b5_sio_data[3],l2b5_sio_data[5],l2b5_sio_data[7],l2b5_sio_data[9],l2b5_sio_data[11],l2b5_sio_data[13],l2b5_sio_data[15],l2b5_sio_data[17],l2b5_sio_data[19],l2b5_sio_data[21],l2b5_sio_data[23],l2b5_sio_data[25],l2b5_sio_data[27],l2b5_sio_data[29],l2b5_sio_data[31] ^ l2b5_sio_parity[1]}
      -active (($0in_rising_edge($0in_delay(l2b5_sio_ctag_vld,6))) && ($0in_delay(l2b5_sio_data[16] == 1,6)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l5_parity_odd_cycle6
*/

/*   0in odd_parity
      -var {l2b5_sio_data[1],l2b5_sio_data[3],l2b5_sio_data[5],l2b5_sio_data[7],l2b5_sio_data[9],l2b5_sio_data[11],l2b5_sio_data[13],l2b5_sio_data[15],l2b5_sio_data[17],l2b5_sio_data[19],l2b5_sio_data[21],l2b5_sio_data[23],l2b5_sio_data[25],l2b5_sio_data[27],l2b5_sio_data[29],l2b5_sio_data[31] ^ l2b5_sio_parity[1]}
      -active (($0in_rising_edge($0in_delay(l2b5_sio_ctag_vld,7))) && ($0in_delay(l2b5_sio_data[16] == 1,7)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l5_parity_odd_cycle7
*/

/*   0in odd_parity
      -var {l2b5_sio_data[1],l2b5_sio_data[3],l2b5_sio_data[5],l2b5_sio_data[7],l2b5_sio_data[9],l2b5_sio_data[11],l2b5_sio_data[13],l2b5_sio_data[15],l2b5_sio_data[17],l2b5_sio_data[19],l2b5_sio_data[21],l2b5_sio_data[23],l2b5_sio_data[25],l2b5_sio_data[27],l2b5_sio_data[29],l2b5_sio_data[31] ^ l2b5_sio_parity[1]}
      -active (($0in_rising_edge($0in_delay(l2b5_sio_ctag_vld,8))) && ($0in_delay(l2b5_sio_data[16] == 1,8)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l5_parity_odd_cycle8
*/

/*   0in odd_parity
      -var {l2b5_sio_data[1],l2b5_sio_data[3],l2b5_sio_data[5],l2b5_sio_data[7],l2b5_sio_data[9],l2b5_sio_data[11],l2b5_sio_data[13],l2b5_sio_data[15],l2b5_sio_data[17],l2b5_sio_data[19],l2b5_sio_data[21],l2b5_sio_data[23],l2b5_sio_data[25],l2b5_sio_data[27],l2b5_sio_data[29],l2b5_sio_data[31] ^ l2b5_sio_parity[1]}
      -active (($0in_rising_edge($0in_delay(l2b5_sio_ctag_vld,9))) && ($0in_delay(l2b5_sio_data[16] == 1,9)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l5_parity_odd_cycle9
*/

/*   0in odd_parity
      -var {l2b5_sio_data[1],l2b5_sio_data[3],l2b5_sio_data[5],l2b5_sio_data[7],l2b5_sio_data[9],l2b5_sio_data[11],l2b5_sio_data[13],l2b5_sio_data[15],l2b5_sio_data[17],l2b5_sio_data[19],l2b5_sio_data[21],l2b5_sio_data[23],l2b5_sio_data[25],l2b5_sio_data[27],l2b5_sio_data[29],l2b5_sio_data[31] ^ l2b5_sio_parity[1]}
      -active (($0in_rising_edge($0in_delay(l2b5_sio_ctag_vld,10))) && ($0in_delay(l2b5_sio_data[16] == 1,10)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l5_parity_odd_cycle10
*/

/*   0in odd_parity
      -var {l2b5_sio_data[1],l2b5_sio_data[3],l2b5_sio_data[5],l2b5_sio_data[7],l2b5_sio_data[9],l2b5_sio_data[11],l2b5_sio_data[13],l2b5_sio_data[15],l2b5_sio_data[17],l2b5_sio_data[19],l2b5_sio_data[21],l2b5_sio_data[23],l2b5_sio_data[25],l2b5_sio_data[27],l2b5_sio_data[29],l2b5_sio_data[31] ^ l2b5_sio_parity[1]}
      -active (($0in_rising_edge($0in_delay(l2b5_sio_ctag_vld,11))) && ($0in_delay(l2b5_sio_data[16] == 1,11)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l5_parity_odd_cycle11
*/

/*   0in odd_parity
      -var {l2b5_sio_data[1],l2b5_sio_data[3],l2b5_sio_data[5],l2b5_sio_data[7],l2b5_sio_data[9],l2b5_sio_data[11],l2b5_sio_data[13],l2b5_sio_data[15],l2b5_sio_data[17],l2b5_sio_data[19],l2b5_sio_data[21],l2b5_sio_data[23],l2b5_sio_data[25],l2b5_sio_data[27],l2b5_sio_data[29],l2b5_sio_data[31] ^ l2b5_sio_parity[1]}
      -active (($0in_rising_edge($0in_delay(l2b5_sio_ctag_vld,12))) && ($0in_delay(l2b5_sio_data[16] == 1,12)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l5_parity_odd_cycle12
*/

/*   0in odd_parity
      -var {l2b5_sio_data[1],l2b5_sio_data[3],l2b5_sio_data[5],l2b5_sio_data[7],l2b5_sio_data[9],l2b5_sio_data[11],l2b5_sio_data[13],l2b5_sio_data[15],l2b5_sio_data[17],l2b5_sio_data[19],l2b5_sio_data[21],l2b5_sio_data[23],l2b5_sio_data[25],l2b5_sio_data[27],l2b5_sio_data[29],l2b5_sio_data[31] ^ l2b5_sio_parity[1]}
      -active (($0in_rising_edge($0in_delay(l2b5_sio_ctag_vld,13))) && ($0in_delay(l2b5_sio_data[16] == 1,13)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l5_parity_odd_cycle13
*/

/*   0in odd_parity
      -var {l2b5_sio_data[1],l2b5_sio_data[3],l2b5_sio_data[5],l2b5_sio_data[7],l2b5_sio_data[9],l2b5_sio_data[11],l2b5_sio_data[13],l2b5_sio_data[15],l2b5_sio_data[17],l2b5_sio_data[19],l2b5_sio_data[21],l2b5_sio_data[23],l2b5_sio_data[25],l2b5_sio_data[27],l2b5_sio_data[29],l2b5_sio_data[31] ^ l2b5_sio_parity[1]}
      -active (($0in_rising_edge($0in_delay(l2b5_sio_ctag_vld,14))) && ($0in_delay(l2b5_sio_data[16] == 1,14)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l5_parity_odd_cycle14
*/

/*   0in odd_parity
      -var {l2b5_sio_data[1],l2b5_sio_data[3],l2b5_sio_data[5],l2b5_sio_data[7],l2b5_sio_data[9],l2b5_sio_data[11],l2b5_sio_data[13],l2b5_sio_data[15],l2b5_sio_data[17],l2b5_sio_data[19],l2b5_sio_data[21],l2b5_sio_data[23],l2b5_sio_data[25],l2b5_sio_data[27],l2b5_sio_data[29],l2b5_sio_data[31] ^ l2b5_sio_parity[1]}
      -active (($0in_rising_edge($0in_delay(l2b5_sio_ctag_vld,15))) && ($0in_delay(l2b5_sio_data[16] == 1,15)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l5_parity_odd_cycle15
*/

/*   0in odd_parity
      -var {l2b5_sio_data[1],l2b5_sio_data[3],l2b5_sio_data[5],l2b5_sio_data[7],l2b5_sio_data[9],l2b5_sio_data[11],l2b5_sio_data[13],l2b5_sio_data[15],l2b5_sio_data[17],l2b5_sio_data[19],l2b5_sio_data[21],l2b5_sio_data[23],l2b5_sio_data[25],l2b5_sio_data[27],l2b5_sio_data[29],l2b5_sio_data[31] ^ l2b5_sio_parity[1]}
      -active (($0in_rising_edge($0in_delay(l2b5_sio_ctag_vld,16))) && ($0in_delay(l2b5_sio_data[16] == 1,16)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l5_parity_odd_cycle16
*/

/*   0in odd_parity
      -var {l2b6_sio_data[0],l2b6_sio_data[2],l2b6_sio_data[4],l2b6_sio_data[6],l2b6_sio_data[8],l2b6_sio_data[10],l2b6_sio_data[12],l2b6_sio_data[14],l2b6_sio_data[16],l2b6_sio_data[18],l2b6_sio_data[20],l2b6_sio_data[22],l2b6_sio_data[24],l2b6_sio_data[26],l2b6_sio_data[28],l2b6_sio_data[30] ^ l2b6_sio_parity[0]}
      -active (($0in_rising_edge($0in_delay(l2b6_sio_ctag_vld,1))) && ($0in_delay(l2b6_sio_data[16] == 1,1)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l6_parity_even_cycle1
*/

/*   0in odd_parity
      -var {l2b6_sio_data[0],l2b6_sio_data[2],l2b6_sio_data[4],l2b6_sio_data[6],l2b6_sio_data[8],l2b6_sio_data[10],l2b6_sio_data[12],l2b6_sio_data[14],l2b6_sio_data[16],l2b6_sio_data[18],l2b6_sio_data[20],l2b6_sio_data[22],l2b6_sio_data[24],l2b6_sio_data[26],l2b6_sio_data[28],l2b6_sio_data[30] ^ l2b6_sio_parity[0]}
      -active (($0in_rising_edge($0in_delay(l2b6_sio_ctag_vld,2))) && ($0in_delay(l2b6_sio_data[16] == 1,2)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l6_parity_even_cycle2
*/

/*   0in odd_parity
      -var {l2b6_sio_data[0],l2b6_sio_data[2],l2b6_sio_data[4],l2b6_sio_data[6],l2b6_sio_data[8],l2b6_sio_data[10],l2b6_sio_data[12],l2b6_sio_data[14],l2b6_sio_data[16],l2b6_sio_data[18],l2b6_sio_data[20],l2b6_sio_data[22],l2b6_sio_data[24],l2b6_sio_data[26],l2b6_sio_data[28],l2b6_sio_data[30] ^ l2b6_sio_parity[0]}
      -active (($0in_rising_edge($0in_delay(l2b6_sio_ctag_vld,3))) && ($0in_delay(l2b6_sio_data[16] == 1,3)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l6_parity_even_cycle3
*/

/*   0in odd_parity
      -var {l2b6_sio_data[0],l2b6_sio_data[2],l2b6_sio_data[4],l2b6_sio_data[6],l2b6_sio_data[8],l2b6_sio_data[10],l2b6_sio_data[12],l2b6_sio_data[14],l2b6_sio_data[16],l2b6_sio_data[18],l2b6_sio_data[20],l2b6_sio_data[22],l2b6_sio_data[24],l2b6_sio_data[26],l2b6_sio_data[28],l2b6_sio_data[30] ^ l2b6_sio_parity[0]}
      -active (($0in_rising_edge($0in_delay(l2b6_sio_ctag_vld,4))) && ($0in_delay(l2b6_sio_data[16] == 1,4)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l6_parity_even_cycle4
*/

/*   0in odd_parity
      -var {l2b6_sio_data[0],l2b6_sio_data[2],l2b6_sio_data[4],l2b6_sio_data[6],l2b6_sio_data[8],l2b6_sio_data[10],l2b6_sio_data[12],l2b6_sio_data[14],l2b6_sio_data[16],l2b6_sio_data[18],l2b6_sio_data[20],l2b6_sio_data[22],l2b6_sio_data[24],l2b6_sio_data[26],l2b6_sio_data[28],l2b6_sio_data[30] ^ l2b6_sio_parity[0]}
      -active (($0in_rising_edge($0in_delay(l2b6_sio_ctag_vld,5))) && ($0in_delay(l2b6_sio_data[16] == 1,5)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l6_parity_even_cycle5
*/

/*   0in odd_parity
      -var {l2b6_sio_data[0],l2b6_sio_data[2],l2b6_sio_data[4],l2b6_sio_data[6],l2b6_sio_data[8],l2b6_sio_data[10],l2b6_sio_data[12],l2b6_sio_data[14],l2b6_sio_data[16],l2b6_sio_data[18],l2b6_sio_data[20],l2b6_sio_data[22],l2b6_sio_data[24],l2b6_sio_data[26],l2b6_sio_data[28],l2b6_sio_data[30] ^ l2b6_sio_parity[0]}
      -active (($0in_rising_edge($0in_delay(l2b6_sio_ctag_vld,6))) && ($0in_delay(l2b6_sio_data[16] == 1,6)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l6_parity_even_cycle6
*/

/*   0in odd_parity
      -var {l2b6_sio_data[0],l2b6_sio_data[2],l2b6_sio_data[4],l2b6_sio_data[6],l2b6_sio_data[8],l2b6_sio_data[10],l2b6_sio_data[12],l2b6_sio_data[14],l2b6_sio_data[16],l2b6_sio_data[18],l2b6_sio_data[20],l2b6_sio_data[22],l2b6_sio_data[24],l2b6_sio_data[26],l2b6_sio_data[28],l2b6_sio_data[30] ^ l2b6_sio_parity[0]}
      -active (($0in_rising_edge($0in_delay(l2b6_sio_ctag_vld,7))) && ($0in_delay(l2b6_sio_data[16] == 1,7)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l6_parity_even_cycle7
*/

/*   0in odd_parity
      -var {l2b6_sio_data[0],l2b6_sio_data[2],l2b6_sio_data[4],l2b6_sio_data[6],l2b6_sio_data[8],l2b6_sio_data[10],l2b6_sio_data[12],l2b6_sio_data[14],l2b6_sio_data[16],l2b6_sio_data[18],l2b6_sio_data[20],l2b6_sio_data[22],l2b6_sio_data[24],l2b6_sio_data[26],l2b6_sio_data[28],l2b6_sio_data[30] ^ l2b6_sio_parity[0]}
      -active (($0in_rising_edge($0in_delay(l2b6_sio_ctag_vld,8))) && ($0in_delay(l2b6_sio_data[16] == 1,8)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l6_parity_even_cycle8
*/

/*   0in odd_parity
      -var {l2b6_sio_data[0],l2b6_sio_data[2],l2b6_sio_data[4],l2b6_sio_data[6],l2b6_sio_data[8],l2b6_sio_data[10],l2b6_sio_data[12],l2b6_sio_data[14],l2b6_sio_data[16],l2b6_sio_data[18],l2b6_sio_data[20],l2b6_sio_data[22],l2b6_sio_data[24],l2b6_sio_data[26],l2b6_sio_data[28],l2b6_sio_data[30] ^ l2b6_sio_parity[0]}
      -active (($0in_rising_edge($0in_delay(l2b6_sio_ctag_vld,9))) && ($0in_delay(l2b6_sio_data[16] == 1,9)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l6_parity_even_cycle9
*/

/*   0in odd_parity
      -var {l2b6_sio_data[0],l2b6_sio_data[2],l2b6_sio_data[4],l2b6_sio_data[6],l2b6_sio_data[8],l2b6_sio_data[10],l2b6_sio_data[12],l2b6_sio_data[14],l2b6_sio_data[16],l2b6_sio_data[18],l2b6_sio_data[20],l2b6_sio_data[22],l2b6_sio_data[24],l2b6_sio_data[26],l2b6_sio_data[28],l2b6_sio_data[30] ^ l2b6_sio_parity[0]}
      -active (($0in_rising_edge($0in_delay(l2b6_sio_ctag_vld,10))) && ($0in_delay(l2b6_sio_data[16] == 1,10)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l6_parity_even_cycle10
*/

/*   0in odd_parity
      -var {l2b6_sio_data[0],l2b6_sio_data[2],l2b6_sio_data[4],l2b6_sio_data[6],l2b6_sio_data[8],l2b6_sio_data[10],l2b6_sio_data[12],l2b6_sio_data[14],l2b6_sio_data[16],l2b6_sio_data[18],l2b6_sio_data[20],l2b6_sio_data[22],l2b6_sio_data[24],l2b6_sio_data[26],l2b6_sio_data[28],l2b6_sio_data[30] ^ l2b6_sio_parity[0]}
      -active (($0in_rising_edge($0in_delay(l2b6_sio_ctag_vld,11))) && ($0in_delay(l2b6_sio_data[16] == 1,11)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l6_parity_even_cycle11
*/

/*   0in odd_parity
      -var {l2b6_sio_data[0],l2b6_sio_data[2],l2b6_sio_data[4],l2b6_sio_data[6],l2b6_sio_data[8],l2b6_sio_data[10],l2b6_sio_data[12],l2b6_sio_data[14],l2b6_sio_data[16],l2b6_sio_data[18],l2b6_sio_data[20],l2b6_sio_data[22],l2b6_sio_data[24],l2b6_sio_data[26],l2b6_sio_data[28],l2b6_sio_data[30] ^ l2b6_sio_parity[0]}
      -active (($0in_rising_edge($0in_delay(l2b6_sio_ctag_vld,12))) && ($0in_delay(l2b6_sio_data[16] == 1,12)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l6_parity_even_cycle12
*/

/*   0in odd_parity
      -var {l2b6_sio_data[0],l2b6_sio_data[2],l2b6_sio_data[4],l2b6_sio_data[6],l2b6_sio_data[8],l2b6_sio_data[10],l2b6_sio_data[12],l2b6_sio_data[14],l2b6_sio_data[16],l2b6_sio_data[18],l2b6_sio_data[20],l2b6_sio_data[22],l2b6_sio_data[24],l2b6_sio_data[26],l2b6_sio_data[28],l2b6_sio_data[30] ^ l2b6_sio_parity[0]}
      -active (($0in_rising_edge($0in_delay(l2b6_sio_ctag_vld,13))) && ($0in_delay(l2b6_sio_data[16] == 1,13)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l6_parity_even_cycle13
*/

/*   0in odd_parity
      -var {l2b6_sio_data[0],l2b6_sio_data[2],l2b6_sio_data[4],l2b6_sio_data[6],l2b6_sio_data[8],l2b6_sio_data[10],l2b6_sio_data[12],l2b6_sio_data[14],l2b6_sio_data[16],l2b6_sio_data[18],l2b6_sio_data[20],l2b6_sio_data[22],l2b6_sio_data[24],l2b6_sio_data[26],l2b6_sio_data[28],l2b6_sio_data[30] ^ l2b6_sio_parity[0]}
      -active (($0in_rising_edge($0in_delay(l2b6_sio_ctag_vld,14))) && ($0in_delay(l2b6_sio_data[16] == 1,14)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l6_parity_even_cycle14
*/

/*   0in odd_parity
      -var {l2b6_sio_data[0],l2b6_sio_data[2],l2b6_sio_data[4],l2b6_sio_data[6],l2b6_sio_data[8],l2b6_sio_data[10],l2b6_sio_data[12],l2b6_sio_data[14],l2b6_sio_data[16],l2b6_sio_data[18],l2b6_sio_data[20],l2b6_sio_data[22],l2b6_sio_data[24],l2b6_sio_data[26],l2b6_sio_data[28],l2b6_sio_data[30] ^ l2b6_sio_parity[0]}
      -active (($0in_rising_edge($0in_delay(l2b6_sio_ctag_vld,15))) && ($0in_delay(l2b6_sio_data[16] == 1,15)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l6_parity_even_cycle15
*/

/*   0in odd_parity
      -var {l2b6_sio_data[0],l2b6_sio_data[2],l2b6_sio_data[4],l2b6_sio_data[6],l2b6_sio_data[8],l2b6_sio_data[10],l2b6_sio_data[12],l2b6_sio_data[14],l2b6_sio_data[16],l2b6_sio_data[18],l2b6_sio_data[20],l2b6_sio_data[22],l2b6_sio_data[24],l2b6_sio_data[26],l2b6_sio_data[28],l2b6_sio_data[30] ^ l2b6_sio_parity[0]}
      -active (($0in_rising_edge($0in_delay(l2b6_sio_ctag_vld,16))) && ($0in_delay(l2b6_sio_data[16] == 1,16)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l6_parity_even_cycle16
*/

/*   0in odd_parity
      -var {l2b6_sio_data[1],l2b6_sio_data[3],l2b6_sio_data[5],l2b6_sio_data[7],l2b6_sio_data[9],l2b6_sio_data[11],l2b6_sio_data[13],l2b6_sio_data[15],l2b6_sio_data[17],l2b6_sio_data[19],l2b6_sio_data[21],l2b6_sio_data[23],l2b6_sio_data[25],l2b6_sio_data[27],l2b6_sio_data[29],l2b6_sio_data[31] ^ l2b6_sio_parity[1]}
      -active (($0in_rising_edge($0in_delay(l2b6_sio_ctag_vld,1))) && ($0in_delay(l2b6_sio_data[16] == 1,1)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l6_parity_odd_cycle1
*/

/*   0in odd_parity
      -var {l2b6_sio_data[1],l2b6_sio_data[3],l2b6_sio_data[5],l2b6_sio_data[7],l2b6_sio_data[9],l2b6_sio_data[11],l2b6_sio_data[13],l2b6_sio_data[15],l2b6_sio_data[17],l2b6_sio_data[19],l2b6_sio_data[21],l2b6_sio_data[23],l2b6_sio_data[25],l2b6_sio_data[27],l2b6_sio_data[29],l2b6_sio_data[31] ^ l2b6_sio_parity[1]}
      -active (($0in_rising_edge($0in_delay(l2b6_sio_ctag_vld,2))) && ($0in_delay(l2b6_sio_data[16] == 1,2)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l6_parity_odd_cycle2
*/

/*   0in odd_parity
      -var {l2b6_sio_data[1],l2b6_sio_data[3],l2b6_sio_data[5],l2b6_sio_data[7],l2b6_sio_data[9],l2b6_sio_data[11],l2b6_sio_data[13],l2b6_sio_data[15],l2b6_sio_data[17],l2b6_sio_data[19],l2b6_sio_data[21],l2b6_sio_data[23],l2b6_sio_data[25],l2b6_sio_data[27],l2b6_sio_data[29],l2b6_sio_data[31] ^ l2b6_sio_parity[1]}
      -active (($0in_rising_edge($0in_delay(l2b6_sio_ctag_vld,3))) && ($0in_delay(l2b6_sio_data[16] == 1,3)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l6_parity_odd_cycle3
*/

/*   0in odd_parity
      -var {l2b6_sio_data[1],l2b6_sio_data[3],l2b6_sio_data[5],l2b6_sio_data[7],l2b6_sio_data[9],l2b6_sio_data[11],l2b6_sio_data[13],l2b6_sio_data[15],l2b6_sio_data[17],l2b6_sio_data[19],l2b6_sio_data[21],l2b6_sio_data[23],l2b6_sio_data[25],l2b6_sio_data[27],l2b6_sio_data[29],l2b6_sio_data[31] ^ l2b6_sio_parity[1]}
      -active (($0in_rising_edge($0in_delay(l2b6_sio_ctag_vld,4))) && ($0in_delay(l2b6_sio_data[16] == 1,4)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l6_parity_odd_cycle4
*/

/*   0in odd_parity
      -var {l2b6_sio_data[1],l2b6_sio_data[3],l2b6_sio_data[5],l2b6_sio_data[7],l2b6_sio_data[9],l2b6_sio_data[11],l2b6_sio_data[13],l2b6_sio_data[15],l2b6_sio_data[17],l2b6_sio_data[19],l2b6_sio_data[21],l2b6_sio_data[23],l2b6_sio_data[25],l2b6_sio_data[27],l2b6_sio_data[29],l2b6_sio_data[31] ^ l2b6_sio_parity[1]}
      -active (($0in_rising_edge($0in_delay(l2b6_sio_ctag_vld,5))) && ($0in_delay(l2b6_sio_data[16] == 1,5)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l6_parity_odd_cycle5
*/

/*   0in odd_parity
      -var {l2b6_sio_data[1],l2b6_sio_data[3],l2b6_sio_data[5],l2b6_sio_data[7],l2b6_sio_data[9],l2b6_sio_data[11],l2b6_sio_data[13],l2b6_sio_data[15],l2b6_sio_data[17],l2b6_sio_data[19],l2b6_sio_data[21],l2b6_sio_data[23],l2b6_sio_data[25],l2b6_sio_data[27],l2b6_sio_data[29],l2b6_sio_data[31] ^ l2b6_sio_parity[1]}
      -active (($0in_rising_edge($0in_delay(l2b6_sio_ctag_vld,6))) && ($0in_delay(l2b6_sio_data[16] == 1,6)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l6_parity_odd_cycle6
*/

/*   0in odd_parity
      -var {l2b6_sio_data[1],l2b6_sio_data[3],l2b6_sio_data[5],l2b6_sio_data[7],l2b6_sio_data[9],l2b6_sio_data[11],l2b6_sio_data[13],l2b6_sio_data[15],l2b6_sio_data[17],l2b6_sio_data[19],l2b6_sio_data[21],l2b6_sio_data[23],l2b6_sio_data[25],l2b6_sio_data[27],l2b6_sio_data[29],l2b6_sio_data[31] ^ l2b6_sio_parity[1]}
      -active (($0in_rising_edge($0in_delay(l2b6_sio_ctag_vld,7))) && ($0in_delay(l2b6_sio_data[16] == 1,7)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l6_parity_odd_cycle7
*/

/*   0in odd_parity
      -var {l2b6_sio_data[1],l2b6_sio_data[3],l2b6_sio_data[5],l2b6_sio_data[7],l2b6_sio_data[9],l2b6_sio_data[11],l2b6_sio_data[13],l2b6_sio_data[15],l2b6_sio_data[17],l2b6_sio_data[19],l2b6_sio_data[21],l2b6_sio_data[23],l2b6_sio_data[25],l2b6_sio_data[27],l2b6_sio_data[29],l2b6_sio_data[31] ^ l2b6_sio_parity[1]}
      -active (($0in_rising_edge($0in_delay(l2b6_sio_ctag_vld,8))) && ($0in_delay(l2b6_sio_data[16] == 1,8)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l6_parity_odd_cycle8
*/

/*   0in odd_parity
      -var {l2b6_sio_data[1],l2b6_sio_data[3],l2b6_sio_data[5],l2b6_sio_data[7],l2b6_sio_data[9],l2b6_sio_data[11],l2b6_sio_data[13],l2b6_sio_data[15],l2b6_sio_data[17],l2b6_sio_data[19],l2b6_sio_data[21],l2b6_sio_data[23],l2b6_sio_data[25],l2b6_sio_data[27],l2b6_sio_data[29],l2b6_sio_data[31] ^ l2b6_sio_parity[1]}
      -active (($0in_rising_edge($0in_delay(l2b6_sio_ctag_vld,9))) && ($0in_delay(l2b6_sio_data[16] == 1,9)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l6_parity_odd_cycle9
*/

/*   0in odd_parity
      -var {l2b6_sio_data[1],l2b6_sio_data[3],l2b6_sio_data[5],l2b6_sio_data[7],l2b6_sio_data[9],l2b6_sio_data[11],l2b6_sio_data[13],l2b6_sio_data[15],l2b6_sio_data[17],l2b6_sio_data[19],l2b6_sio_data[21],l2b6_sio_data[23],l2b6_sio_data[25],l2b6_sio_data[27],l2b6_sio_data[29],l2b6_sio_data[31] ^ l2b6_sio_parity[1]}
      -active (($0in_rising_edge($0in_delay(l2b6_sio_ctag_vld,10))) && ($0in_delay(l2b6_sio_data[16] == 1,10)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l6_parity_odd_cycle10
*/

/*   0in odd_parity
      -var {l2b6_sio_data[1],l2b6_sio_data[3],l2b6_sio_data[5],l2b6_sio_data[7],l2b6_sio_data[9],l2b6_sio_data[11],l2b6_sio_data[13],l2b6_sio_data[15],l2b6_sio_data[17],l2b6_sio_data[19],l2b6_sio_data[21],l2b6_sio_data[23],l2b6_sio_data[25],l2b6_sio_data[27],l2b6_sio_data[29],l2b6_sio_data[31] ^ l2b6_sio_parity[1]}
      -active (($0in_rising_edge($0in_delay(l2b6_sio_ctag_vld,11))) && ($0in_delay(l2b6_sio_data[16] == 1,11)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l6_parity_odd_cycle11
*/

/*   0in odd_parity
      -var {l2b6_sio_data[1],l2b6_sio_data[3],l2b6_sio_data[5],l2b6_sio_data[7],l2b6_sio_data[9],l2b6_sio_data[11],l2b6_sio_data[13],l2b6_sio_data[15],l2b6_sio_data[17],l2b6_sio_data[19],l2b6_sio_data[21],l2b6_sio_data[23],l2b6_sio_data[25],l2b6_sio_data[27],l2b6_sio_data[29],l2b6_sio_data[31] ^ l2b6_sio_parity[1]}
      -active (($0in_rising_edge($0in_delay(l2b6_sio_ctag_vld,12))) && ($0in_delay(l2b6_sio_data[16] == 1,12)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l6_parity_odd_cycle12
*/

/*   0in odd_parity
      -var {l2b6_sio_data[1],l2b6_sio_data[3],l2b6_sio_data[5],l2b6_sio_data[7],l2b6_sio_data[9],l2b6_sio_data[11],l2b6_sio_data[13],l2b6_sio_data[15],l2b6_sio_data[17],l2b6_sio_data[19],l2b6_sio_data[21],l2b6_sio_data[23],l2b6_sio_data[25],l2b6_sio_data[27],l2b6_sio_data[29],l2b6_sio_data[31] ^ l2b6_sio_parity[1]}
      -active (($0in_rising_edge($0in_delay(l2b6_sio_ctag_vld,13))) && ($0in_delay(l2b6_sio_data[16] == 1,13)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l6_parity_odd_cycle13
*/

/*   0in odd_parity
      -var {l2b6_sio_data[1],l2b6_sio_data[3],l2b6_sio_data[5],l2b6_sio_data[7],l2b6_sio_data[9],l2b6_sio_data[11],l2b6_sio_data[13],l2b6_sio_data[15],l2b6_sio_data[17],l2b6_sio_data[19],l2b6_sio_data[21],l2b6_sio_data[23],l2b6_sio_data[25],l2b6_sio_data[27],l2b6_sio_data[29],l2b6_sio_data[31] ^ l2b6_sio_parity[1]}
      -active (($0in_rising_edge($0in_delay(l2b6_sio_ctag_vld,14))) && ($0in_delay(l2b6_sio_data[16] == 1,14)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l6_parity_odd_cycle14
*/

/*   0in odd_parity
      -var {l2b6_sio_data[1],l2b6_sio_data[3],l2b6_sio_data[5],l2b6_sio_data[7],l2b6_sio_data[9],l2b6_sio_data[11],l2b6_sio_data[13],l2b6_sio_data[15],l2b6_sio_data[17],l2b6_sio_data[19],l2b6_sio_data[21],l2b6_sio_data[23],l2b6_sio_data[25],l2b6_sio_data[27],l2b6_sio_data[29],l2b6_sio_data[31] ^ l2b6_sio_parity[1]}
      -active (($0in_rising_edge($0in_delay(l2b6_sio_ctag_vld,15))) && ($0in_delay(l2b6_sio_data[16] == 1,15)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l6_parity_odd_cycle15
*/

/*   0in odd_parity
      -var {l2b6_sio_data[1],l2b6_sio_data[3],l2b6_sio_data[5],l2b6_sio_data[7],l2b6_sio_data[9],l2b6_sio_data[11],l2b6_sio_data[13],l2b6_sio_data[15],l2b6_sio_data[17],l2b6_sio_data[19],l2b6_sio_data[21],l2b6_sio_data[23],l2b6_sio_data[25],l2b6_sio_data[27],l2b6_sio_data[29],l2b6_sio_data[31] ^ l2b6_sio_parity[1]}
      -active (($0in_rising_edge($0in_delay(l2b6_sio_ctag_vld,16))) && ($0in_delay(l2b6_sio_data[16] == 1,16)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l6_parity_odd_cycle16
*/

/*   0in odd_parity
      -var {l2b7_sio_data[0],l2b7_sio_data[2],l2b7_sio_data[4],l2b7_sio_data[6],l2b7_sio_data[8],l2b7_sio_data[10],l2b7_sio_data[12],l2b7_sio_data[14],l2b7_sio_data[16],l2b7_sio_data[18],l2b7_sio_data[20],l2b7_sio_data[22],l2b7_sio_data[24],l2b7_sio_data[26],l2b7_sio_data[28],l2b7_sio_data[30] ^ l2b7_sio_parity[0]}
      -active (($0in_rising_edge($0in_delay(l2b7_sio_ctag_vld,1))) && ($0in_delay(l2b7_sio_data[16] == 1,1)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l7_parity_even_cycle1
*/

/*   0in odd_parity
      -var {l2b7_sio_data[0],l2b7_sio_data[2],l2b7_sio_data[4],l2b7_sio_data[6],l2b7_sio_data[8],l2b7_sio_data[10],l2b7_sio_data[12],l2b7_sio_data[14],l2b7_sio_data[16],l2b7_sio_data[18],l2b7_sio_data[20],l2b7_sio_data[22],l2b7_sio_data[24],l2b7_sio_data[26],l2b7_sio_data[28],l2b7_sio_data[30] ^ l2b7_sio_parity[0]}
      -active (($0in_rising_edge($0in_delay(l2b7_sio_ctag_vld,2))) && ($0in_delay(l2b7_sio_data[16] == 1,2)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l7_parity_even_cycle2
*/

/*   0in odd_parity
      -var {l2b7_sio_data[0],l2b7_sio_data[2],l2b7_sio_data[4],l2b7_sio_data[6],l2b7_sio_data[8],l2b7_sio_data[10],l2b7_sio_data[12],l2b7_sio_data[14],l2b7_sio_data[16],l2b7_sio_data[18],l2b7_sio_data[20],l2b7_sio_data[22],l2b7_sio_data[24],l2b7_sio_data[26],l2b7_sio_data[28],l2b7_sio_data[30] ^ l2b7_sio_parity[0]}
      -active (($0in_rising_edge($0in_delay(l2b7_sio_ctag_vld,3))) && ($0in_delay(l2b7_sio_data[16] == 1,3)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l7_parity_even_cycle3
*/

/*   0in odd_parity
      -var {l2b7_sio_data[0],l2b7_sio_data[2],l2b7_sio_data[4],l2b7_sio_data[6],l2b7_sio_data[8],l2b7_sio_data[10],l2b7_sio_data[12],l2b7_sio_data[14],l2b7_sio_data[16],l2b7_sio_data[18],l2b7_sio_data[20],l2b7_sio_data[22],l2b7_sio_data[24],l2b7_sio_data[26],l2b7_sio_data[28],l2b7_sio_data[30] ^ l2b7_sio_parity[0]}
      -active (($0in_rising_edge($0in_delay(l2b7_sio_ctag_vld,4))) && ($0in_delay(l2b7_sio_data[16] == 1,4)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l7_parity_even_cycle4
*/

/*   0in odd_parity
      -var {l2b7_sio_data[0],l2b7_sio_data[2],l2b7_sio_data[4],l2b7_sio_data[6],l2b7_sio_data[8],l2b7_sio_data[10],l2b7_sio_data[12],l2b7_sio_data[14],l2b7_sio_data[16],l2b7_sio_data[18],l2b7_sio_data[20],l2b7_sio_data[22],l2b7_sio_data[24],l2b7_sio_data[26],l2b7_sio_data[28],l2b7_sio_data[30] ^ l2b7_sio_parity[0]}
      -active (($0in_rising_edge($0in_delay(l2b7_sio_ctag_vld,5))) && ($0in_delay(l2b7_sio_data[16] == 1,5)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l7_parity_even_cycle5
*/

/*   0in odd_parity
      -var {l2b7_sio_data[0],l2b7_sio_data[2],l2b7_sio_data[4],l2b7_sio_data[6],l2b7_sio_data[8],l2b7_sio_data[10],l2b7_sio_data[12],l2b7_sio_data[14],l2b7_sio_data[16],l2b7_sio_data[18],l2b7_sio_data[20],l2b7_sio_data[22],l2b7_sio_data[24],l2b7_sio_data[26],l2b7_sio_data[28],l2b7_sio_data[30] ^ l2b7_sio_parity[0]}
      -active (($0in_rising_edge($0in_delay(l2b7_sio_ctag_vld,6))) && ($0in_delay(l2b7_sio_data[16] == 1,6)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l7_parity_even_cycle6
*/

/*   0in odd_parity
      -var {l2b7_sio_data[0],l2b7_sio_data[2],l2b7_sio_data[4],l2b7_sio_data[6],l2b7_sio_data[8],l2b7_sio_data[10],l2b7_sio_data[12],l2b7_sio_data[14],l2b7_sio_data[16],l2b7_sio_data[18],l2b7_sio_data[20],l2b7_sio_data[22],l2b7_sio_data[24],l2b7_sio_data[26],l2b7_sio_data[28],l2b7_sio_data[30] ^ l2b7_sio_parity[0]}
      -active (($0in_rising_edge($0in_delay(l2b7_sio_ctag_vld,7))) && ($0in_delay(l2b7_sio_data[16] == 1,7)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l7_parity_even_cycle7
*/

/*   0in odd_parity
      -var {l2b7_sio_data[0],l2b7_sio_data[2],l2b7_sio_data[4],l2b7_sio_data[6],l2b7_sio_data[8],l2b7_sio_data[10],l2b7_sio_data[12],l2b7_sio_data[14],l2b7_sio_data[16],l2b7_sio_data[18],l2b7_sio_data[20],l2b7_sio_data[22],l2b7_sio_data[24],l2b7_sio_data[26],l2b7_sio_data[28],l2b7_sio_data[30] ^ l2b7_sio_parity[0]}
      -active (($0in_rising_edge($0in_delay(l2b7_sio_ctag_vld,8))) && ($0in_delay(l2b7_sio_data[16] == 1,8)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l7_parity_even_cycle8
*/

/*   0in odd_parity
      -var {l2b7_sio_data[0],l2b7_sio_data[2],l2b7_sio_data[4],l2b7_sio_data[6],l2b7_sio_data[8],l2b7_sio_data[10],l2b7_sio_data[12],l2b7_sio_data[14],l2b7_sio_data[16],l2b7_sio_data[18],l2b7_sio_data[20],l2b7_sio_data[22],l2b7_sio_data[24],l2b7_sio_data[26],l2b7_sio_data[28],l2b7_sio_data[30] ^ l2b7_sio_parity[0]}
      -active (($0in_rising_edge($0in_delay(l2b7_sio_ctag_vld,9))) && ($0in_delay(l2b7_sio_data[16] == 1,9)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l7_parity_even_cycle9
*/

/*   0in odd_parity
      -var {l2b7_sio_data[0],l2b7_sio_data[2],l2b7_sio_data[4],l2b7_sio_data[6],l2b7_sio_data[8],l2b7_sio_data[10],l2b7_sio_data[12],l2b7_sio_data[14],l2b7_sio_data[16],l2b7_sio_data[18],l2b7_sio_data[20],l2b7_sio_data[22],l2b7_sio_data[24],l2b7_sio_data[26],l2b7_sio_data[28],l2b7_sio_data[30] ^ l2b7_sio_parity[0]}
      -active (($0in_rising_edge($0in_delay(l2b7_sio_ctag_vld,10))) && ($0in_delay(l2b7_sio_data[16] == 1,10)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l7_parity_even_cycle10
*/

/*   0in odd_parity
      -var {l2b7_sio_data[0],l2b7_sio_data[2],l2b7_sio_data[4],l2b7_sio_data[6],l2b7_sio_data[8],l2b7_sio_data[10],l2b7_sio_data[12],l2b7_sio_data[14],l2b7_sio_data[16],l2b7_sio_data[18],l2b7_sio_data[20],l2b7_sio_data[22],l2b7_sio_data[24],l2b7_sio_data[26],l2b7_sio_data[28],l2b7_sio_data[30] ^ l2b7_sio_parity[0]}
      -active (($0in_rising_edge($0in_delay(l2b7_sio_ctag_vld,11))) && ($0in_delay(l2b7_sio_data[16] == 1,11)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l7_parity_even_cycle11
*/

/*   0in odd_parity
      -var {l2b7_sio_data[0],l2b7_sio_data[2],l2b7_sio_data[4],l2b7_sio_data[6],l2b7_sio_data[8],l2b7_sio_data[10],l2b7_sio_data[12],l2b7_sio_data[14],l2b7_sio_data[16],l2b7_sio_data[18],l2b7_sio_data[20],l2b7_sio_data[22],l2b7_sio_data[24],l2b7_sio_data[26],l2b7_sio_data[28],l2b7_sio_data[30] ^ l2b7_sio_parity[0]}
      -active (($0in_rising_edge($0in_delay(l2b7_sio_ctag_vld,12))) && ($0in_delay(l2b7_sio_data[16] == 1,12)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l7_parity_even_cycle12
*/

/*   0in odd_parity
      -var {l2b7_sio_data[0],l2b7_sio_data[2],l2b7_sio_data[4],l2b7_sio_data[6],l2b7_sio_data[8],l2b7_sio_data[10],l2b7_sio_data[12],l2b7_sio_data[14],l2b7_sio_data[16],l2b7_sio_data[18],l2b7_sio_data[20],l2b7_sio_data[22],l2b7_sio_data[24],l2b7_sio_data[26],l2b7_sio_data[28],l2b7_sio_data[30] ^ l2b7_sio_parity[0]}
      -active (($0in_rising_edge($0in_delay(l2b7_sio_ctag_vld,13))) && ($0in_delay(l2b7_sio_data[16] == 1,13)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l7_parity_even_cycle13
*/

/*   0in odd_parity
      -var {l2b7_sio_data[0],l2b7_sio_data[2],l2b7_sio_data[4],l2b7_sio_data[6],l2b7_sio_data[8],l2b7_sio_data[10],l2b7_sio_data[12],l2b7_sio_data[14],l2b7_sio_data[16],l2b7_sio_data[18],l2b7_sio_data[20],l2b7_sio_data[22],l2b7_sio_data[24],l2b7_sio_data[26],l2b7_sio_data[28],l2b7_sio_data[30] ^ l2b7_sio_parity[0]}
      -active (($0in_rising_edge($0in_delay(l2b7_sio_ctag_vld,14))) && ($0in_delay(l2b7_sio_data[16] == 1,14)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l7_parity_even_cycle14
*/

/*   0in odd_parity
      -var {l2b7_sio_data[0],l2b7_sio_data[2],l2b7_sio_data[4],l2b7_sio_data[6],l2b7_sio_data[8],l2b7_sio_data[10],l2b7_sio_data[12],l2b7_sio_data[14],l2b7_sio_data[16],l2b7_sio_data[18],l2b7_sio_data[20],l2b7_sio_data[22],l2b7_sio_data[24],l2b7_sio_data[26],l2b7_sio_data[28],l2b7_sio_data[30] ^ l2b7_sio_parity[0]}
      -active (($0in_rising_edge($0in_delay(l2b7_sio_ctag_vld,15))) && ($0in_delay(l2b7_sio_data[16] == 1,15)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l7_parity_even_cycle15
*/

/*   0in odd_parity
      -var {l2b7_sio_data[0],l2b7_sio_data[2],l2b7_sio_data[4],l2b7_sio_data[6],l2b7_sio_data[8],l2b7_sio_data[10],l2b7_sio_data[12],l2b7_sio_data[14],l2b7_sio_data[16],l2b7_sio_data[18],l2b7_sio_data[20],l2b7_sio_data[22],l2b7_sio_data[24],l2b7_sio_data[26],l2b7_sio_data[28],l2b7_sio_data[30] ^ l2b7_sio_parity[0]}
      -active (($0in_rising_edge($0in_delay(l2b7_sio_ctag_vld,16))) && ($0in_delay(l2b7_sio_data[16] == 1,16)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l7_parity_even_cycle16
*/

/*   0in odd_parity
      -var {l2b7_sio_data[1],l2b7_sio_data[3],l2b7_sio_data[5],l2b7_sio_data[7],l2b7_sio_data[9],l2b7_sio_data[11],l2b7_sio_data[13],l2b7_sio_data[15],l2b7_sio_data[17],l2b7_sio_data[19],l2b7_sio_data[21],l2b7_sio_data[23],l2b7_sio_data[25],l2b7_sio_data[27],l2b7_sio_data[29],l2b7_sio_data[31] ^ l2b7_sio_parity[1]}
      -active (($0in_rising_edge($0in_delay(l2b7_sio_ctag_vld,1))) && ($0in_delay(l2b7_sio_data[16] == 1,1)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l7_parity_odd_cycle1
*/

/*   0in odd_parity
      -var {l2b7_sio_data[1],l2b7_sio_data[3],l2b7_sio_data[5],l2b7_sio_data[7],l2b7_sio_data[9],l2b7_sio_data[11],l2b7_sio_data[13],l2b7_sio_data[15],l2b7_sio_data[17],l2b7_sio_data[19],l2b7_sio_data[21],l2b7_sio_data[23],l2b7_sio_data[25],l2b7_sio_data[27],l2b7_sio_data[29],l2b7_sio_data[31] ^ l2b7_sio_parity[1]}
      -active (($0in_rising_edge($0in_delay(l2b7_sio_ctag_vld,2))) && ($0in_delay(l2b7_sio_data[16] == 1,2)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l7_parity_odd_cycle2
*/

/*   0in odd_parity
      -var {l2b7_sio_data[1],l2b7_sio_data[3],l2b7_sio_data[5],l2b7_sio_data[7],l2b7_sio_data[9],l2b7_sio_data[11],l2b7_sio_data[13],l2b7_sio_data[15],l2b7_sio_data[17],l2b7_sio_data[19],l2b7_sio_data[21],l2b7_sio_data[23],l2b7_sio_data[25],l2b7_sio_data[27],l2b7_sio_data[29],l2b7_sio_data[31] ^ l2b7_sio_parity[1]}
      -active (($0in_rising_edge($0in_delay(l2b7_sio_ctag_vld,3))) && ($0in_delay(l2b7_sio_data[16] == 1,3)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l7_parity_odd_cycle3
*/

/*   0in odd_parity
      -var {l2b7_sio_data[1],l2b7_sio_data[3],l2b7_sio_data[5],l2b7_sio_data[7],l2b7_sio_data[9],l2b7_sio_data[11],l2b7_sio_data[13],l2b7_sio_data[15],l2b7_sio_data[17],l2b7_sio_data[19],l2b7_sio_data[21],l2b7_sio_data[23],l2b7_sio_data[25],l2b7_sio_data[27],l2b7_sio_data[29],l2b7_sio_data[31] ^ l2b7_sio_parity[1]}
      -active (($0in_rising_edge($0in_delay(l2b7_sio_ctag_vld,4))) && ($0in_delay(l2b7_sio_data[16] == 1,4)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l7_parity_odd_cycle4
*/

/*   0in odd_parity
      -var {l2b7_sio_data[1],l2b7_sio_data[3],l2b7_sio_data[5],l2b7_sio_data[7],l2b7_sio_data[9],l2b7_sio_data[11],l2b7_sio_data[13],l2b7_sio_data[15],l2b7_sio_data[17],l2b7_sio_data[19],l2b7_sio_data[21],l2b7_sio_data[23],l2b7_sio_data[25],l2b7_sio_data[27],l2b7_sio_data[29],l2b7_sio_data[31] ^ l2b7_sio_parity[1]}
      -active (($0in_rising_edge($0in_delay(l2b7_sio_ctag_vld,5))) && ($0in_delay(l2b7_sio_data[16] == 1,5)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l7_parity_odd_cycle5
*/

/*   0in odd_parity
      -var {l2b7_sio_data[1],l2b7_sio_data[3],l2b7_sio_data[5],l2b7_sio_data[7],l2b7_sio_data[9],l2b7_sio_data[11],l2b7_sio_data[13],l2b7_sio_data[15],l2b7_sio_data[17],l2b7_sio_data[19],l2b7_sio_data[21],l2b7_sio_data[23],l2b7_sio_data[25],l2b7_sio_data[27],l2b7_sio_data[29],l2b7_sio_data[31] ^ l2b7_sio_parity[1]}
      -active (($0in_rising_edge($0in_delay(l2b7_sio_ctag_vld,6))) && ($0in_delay(l2b7_sio_data[16] == 1,6)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l7_parity_odd_cycle6
*/

/*   0in odd_parity
      -var {l2b7_sio_data[1],l2b7_sio_data[3],l2b7_sio_data[5],l2b7_sio_data[7],l2b7_sio_data[9],l2b7_sio_data[11],l2b7_sio_data[13],l2b7_sio_data[15],l2b7_sio_data[17],l2b7_sio_data[19],l2b7_sio_data[21],l2b7_sio_data[23],l2b7_sio_data[25],l2b7_sio_data[27],l2b7_sio_data[29],l2b7_sio_data[31] ^ l2b7_sio_parity[1]}
      -active (($0in_rising_edge($0in_delay(l2b7_sio_ctag_vld,7))) && ($0in_delay(l2b7_sio_data[16] == 1,7)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l7_parity_odd_cycle7
*/

/*   0in odd_parity
      -var {l2b7_sio_data[1],l2b7_sio_data[3],l2b7_sio_data[5],l2b7_sio_data[7],l2b7_sio_data[9],l2b7_sio_data[11],l2b7_sio_data[13],l2b7_sio_data[15],l2b7_sio_data[17],l2b7_sio_data[19],l2b7_sio_data[21],l2b7_sio_data[23],l2b7_sio_data[25],l2b7_sio_data[27],l2b7_sio_data[29],l2b7_sio_data[31] ^ l2b7_sio_parity[1]}
      -active (($0in_rising_edge($0in_delay(l2b7_sio_ctag_vld,8))) && ($0in_delay(l2b7_sio_data[16] == 1,8)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l7_parity_odd_cycle8
*/

/*   0in odd_parity
      -var {l2b7_sio_data[1],l2b7_sio_data[3],l2b7_sio_data[5],l2b7_sio_data[7],l2b7_sio_data[9],l2b7_sio_data[11],l2b7_sio_data[13],l2b7_sio_data[15],l2b7_sio_data[17],l2b7_sio_data[19],l2b7_sio_data[21],l2b7_sio_data[23],l2b7_sio_data[25],l2b7_sio_data[27],l2b7_sio_data[29],l2b7_sio_data[31] ^ l2b7_sio_parity[1]}
      -active (($0in_rising_edge($0in_delay(l2b7_sio_ctag_vld,9))) && ($0in_delay(l2b7_sio_data[16] == 1,9)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l7_parity_odd_cycle9
*/

/*   0in odd_parity
      -var {l2b7_sio_data[1],l2b7_sio_data[3],l2b7_sio_data[5],l2b7_sio_data[7],l2b7_sio_data[9],l2b7_sio_data[11],l2b7_sio_data[13],l2b7_sio_data[15],l2b7_sio_data[17],l2b7_sio_data[19],l2b7_sio_data[21],l2b7_sio_data[23],l2b7_sio_data[25],l2b7_sio_data[27],l2b7_sio_data[29],l2b7_sio_data[31] ^ l2b7_sio_parity[1]}
      -active (($0in_rising_edge($0in_delay(l2b7_sio_ctag_vld,10))) && ($0in_delay(l2b7_sio_data[16] == 1,10)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l7_parity_odd_cycle10
*/

/*   0in odd_parity
      -var {l2b7_sio_data[1],l2b7_sio_data[3],l2b7_sio_data[5],l2b7_sio_data[7],l2b7_sio_data[9],l2b7_sio_data[11],l2b7_sio_data[13],l2b7_sio_data[15],l2b7_sio_data[17],l2b7_sio_data[19],l2b7_sio_data[21],l2b7_sio_data[23],l2b7_sio_data[25],l2b7_sio_data[27],l2b7_sio_data[29],l2b7_sio_data[31] ^ l2b7_sio_parity[1]}
      -active (($0in_rising_edge($0in_delay(l2b7_sio_ctag_vld,11))) && ($0in_delay(l2b7_sio_data[16] == 1,11)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l7_parity_odd_cycle11
*/

/*   0in odd_parity
      -var {l2b7_sio_data[1],l2b7_sio_data[3],l2b7_sio_data[5],l2b7_sio_data[7],l2b7_sio_data[9],l2b7_sio_data[11],l2b7_sio_data[13],l2b7_sio_data[15],l2b7_sio_data[17],l2b7_sio_data[19],l2b7_sio_data[21],l2b7_sio_data[23],l2b7_sio_data[25],l2b7_sio_data[27],l2b7_sio_data[29],l2b7_sio_data[31] ^ l2b7_sio_parity[1]}
      -active (($0in_rising_edge($0in_delay(l2b7_sio_ctag_vld,12))) && ($0in_delay(l2b7_sio_data[16] == 1,12)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l7_parity_odd_cycle12
*/

/*   0in odd_parity
      -var {l2b7_sio_data[1],l2b7_sio_data[3],l2b7_sio_data[5],l2b7_sio_data[7],l2b7_sio_data[9],l2b7_sio_data[11],l2b7_sio_data[13],l2b7_sio_data[15],l2b7_sio_data[17],l2b7_sio_data[19],l2b7_sio_data[21],l2b7_sio_data[23],l2b7_sio_data[25],l2b7_sio_data[27],l2b7_sio_data[29],l2b7_sio_data[31] ^ l2b7_sio_parity[1]}
      -active (($0in_rising_edge($0in_delay(l2b7_sio_ctag_vld,13))) && ($0in_delay(l2b7_sio_data[16] == 1,13)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l7_parity_odd_cycle13
*/

/*   0in odd_parity
      -var {l2b7_sio_data[1],l2b7_sio_data[3],l2b7_sio_data[5],l2b7_sio_data[7],l2b7_sio_data[9],l2b7_sio_data[11],l2b7_sio_data[13],l2b7_sio_data[15],l2b7_sio_data[17],l2b7_sio_data[19],l2b7_sio_data[21],l2b7_sio_data[23],l2b7_sio_data[25],l2b7_sio_data[27],l2b7_sio_data[29],l2b7_sio_data[31] ^ l2b7_sio_parity[1]}
      -active (($0in_rising_edge($0in_delay(l2b7_sio_ctag_vld,14))) && ($0in_delay(l2b7_sio_data[16] == 1,14)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l7_parity_odd_cycle14
*/

/*   0in odd_parity
      -var {l2b7_sio_data[1],l2b7_sio_data[3],l2b7_sio_data[5],l2b7_sio_data[7],l2b7_sio_data[9],l2b7_sio_data[11],l2b7_sio_data[13],l2b7_sio_data[15],l2b7_sio_data[17],l2b7_sio_data[19],l2b7_sio_data[21],l2b7_sio_data[23],l2b7_sio_data[25],l2b7_sio_data[27],l2b7_sio_data[29],l2b7_sio_data[31] ^ l2b7_sio_parity[1]}
      -active (($0in_rising_edge($0in_delay(l2b7_sio_ctag_vld,15))) && ($0in_delay(l2b7_sio_data[16] == 1,15)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l7_parity_odd_cycle15
*/

/*   0in odd_parity
      -var {l2b7_sio_data[1],l2b7_sio_data[3],l2b7_sio_data[5],l2b7_sio_data[7],l2b7_sio_data[9],l2b7_sio_data[11],l2b7_sio_data[13],l2b7_sio_data[15],l2b7_sio_data[17],l2b7_sio_data[19],l2b7_sio_data[21],l2b7_sio_data[23],l2b7_sio_data[25],l2b7_sio_data[27],l2b7_sio_data[29],l2b7_sio_data[31] ^ l2b7_sio_parity[1]}
      -active (($0in_rising_edge($0in_delay(l2b7_sio_ctag_vld,16))) && ($0in_delay(l2b7_sio_data[16] == 1,16)))
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_data_l7_parity_odd_cycle16
*/


/*************************************************************************
*
*  L2   -> DMU/NIU
*  Check error bit through interface
*
**************************************************************************/

/* 0in assert_follower
      -leader (($0in_rising_edge(l2b0_sio_ctag_vld)) && (l2b0_sio_data[21] == 1))
      -follower ((sio_dmu_data[80] == 1) | (sio_dmu_data[81] == 1) | (sio_dmu_data[82] == 1))
      -min 1
      -max 200
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_l0_dmu_error
*/

/* 0in assert_follower
      -leader (($0in_rising_edge(l2b1_sio_ctag_vld)) && (l2b1_sio_data[21] == 1))
      -follower ((sio_dmu_data[80] == 1) | (sio_dmu_data[81] == 1) | (sio_dmu_data[82] == 1))
      -min 1
      -max 200
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_l1_dmu_error
*/

/* 0in assert_follower
      -leader (($0in_rising_edge(l2b2_sio_ctag_vld)) && (l2b2_sio_data[21] == 1))
      -follower ((sio_dmu_data[80] == 1) | (sio_dmu_data[81] == 1) | (sio_dmu_data[82] == 1))
      -min 1
      -max 200
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_l2_dmu_error
*/

/* 0in assert_follower
      -leader (($0in_rising_edge(l2b3_sio_ctag_vld)) && (l2b3_sio_data[21] == 1))
      -follower ((sio_dmu_data[80] == 1) | (sio_dmu_data[81] == 1) | (sio_dmu_data[82] == 1))
      -min 1
      -max 200
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_l3_dmu_error
*/

/* 0in assert_follower
      -leader (($0in_rising_edge(l2b4_sio_ctag_vld)) && (l2b4_sio_data[21] == 1))
      -follower ((sio_dmu_data[80] == 1) | (sio_dmu_data[81] == 1) | (sio_dmu_data[82] == 1))
      -min 1
      -max 200
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_l4_dmu_error
*/

/* 0in assert_follower
      -leader (($0in_rising_edge(l2b5_sio_ctag_vld)) && (l2b5_sio_data[21] == 1))
      -follower ((sio_dmu_data[80] == 1) | (sio_dmu_data[81] == 1) | (sio_dmu_data[82] == 1))
      -min 1
      -max 200
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_l5_dmu_error
*/

/* 0in assert_follower
      -leader (($0in_rising_edge(l2b6_sio_ctag_vld)) && (l2b6_sio_data[21] == 1))
      -follower ((sio_dmu_data[80] == 1) | (sio_dmu_data[81] == 1) | (sio_dmu_data[82] == 1))
      -min 1
      -max 200
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_l6_dmu_error
*/

/* 0in assert_follower
      -leader (($0in_rising_edge(l2b7_sio_ctag_vld)) && (l2b7_sio_data[21] == 1))
      -follower ((sio_dmu_data[80] == 1) | (sio_dmu_data[81] == 1) | (sio_dmu_data[82] == 1))
      -min 1
      -max 200
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_l7_dmu_error
*/


/* 0in assert_follower
      -leader (($0in_rising_edge(l2b0_sio_ctag_vld)) && (l2b0_sio_data[21] == 1))
      -follower ((sio_niu_data[80] == 1) | (sio_niu_data[81] == 1))
      -min 1
      -max 200
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_l0_niu_error
*/

/* 0in assert_follower
      -leader (($0in_rising_edge(l2b1_sio_ctag_vld)) && (l2b1_sio_data[21] == 1))
      -follower ((sio_niu_data[80] == 1) | (sio_niu_data[81] == 1))
      -min 1
      -max 200
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_l1_niu_error
*/

/* 0in assert_follower
      -leader (($0in_rising_edge(l2b2_sio_ctag_vld)) && (l2b2_sio_data[21] == 1))
      -follower ((sio_niu_data[80] == 1) | (sio_niu_data[81] == 1))
      -min 1
      -max 200
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_l2_niu_error
*/

/* 0in assert_follower
      -leader (($0in_rising_edge(l2b3_sio_ctag_vld)) && (l2b3_sio_data[21] == 1))
      -follower ((sio_niu_data[80] == 1) | (sio_niu_data[81] == 1))
      -min 1
      -max 200
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_l3_niu_error
*/

/* 0in assert_follower
      -leader (($0in_rising_edge(l2b4_sio_ctag_vld)) && (l2b4_sio_data[21] == 1))
      -follower ((sio_niu_data[80] == 1) | (sio_niu_data[81] == 1))
      -min 1
      -max 200
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_l4_niu_error
*/

/* 0in assert_follower
      -leader (($0in_rising_edge(l2b5_sio_ctag_vld)) && (l2b5_sio_data[21] == 1))
      -follower ((sio_niu_data[80] == 1) | (sio_niu_data[81] == 1))
      -min 1
      -max 200
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_l5_niu_error
*/

/* 0in assert_follower
      -leader (($0in_rising_edge(l2b6_sio_ctag_vld)) && (l2b6_sio_data[21] == 1))
      -follower ((sio_niu_data[80] == 1) | (sio_niu_data[81] == 1))
      -min 1
      -max 200
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_l6_niu_error
*/

/* 0in assert_follower
      -leader (($0in_rising_edge(l2b7_sio_ctag_vld)) && (l2b7_sio_data[21] == 1))
      -follower ((sio_niu_data[80] == 1) | (sio_niu_data[81] == 1))
      -min 1
      -max 200
      -clock l2clk
      -module cpu  -reset `TB_RST
      -name l2_sio_l7_niu_error
*/


endmodule // sii_l2_ras_chkr