design/sys/iop/dmu/rtl/dmu_cru_csr.v

// ========== Copyright Header Begin ==========================================
//
// OpenSPARC T2 Processor File: dmu_cru_csr.v
// Copyright (C) 1995-2007 Sun Microsystems, Inc. All Rights Reserved
// 4150 Network Circle, Santa Clara, California 95054, U.S.A.
//
// * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
//
// This program is free software; you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation; version 2 of the License.
//
// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
// GNU General Public License for more details.
//
// You should have received a copy of the GNU General Public License
// along with this program; if not, write to the Free Software
// Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
//
// For the avoidance of doubt, and except that if any non-GPL license
// choice is available it will apply instead, Sun elects to use only
// the General Public License version 2 (GPLv2) at this time for any
// software where a choice of GPL license versions is made
// available with the language indicating that GPLv2 or any later version
// may be used, or where a choice of which version of the GPL is applied is
// otherwise unspecified.
//
// Please contact Sun Microsystems, Inc., 4150 Network Circle, Santa Clara,
// CA 95054 USA or visit www.sun.com if you need additional information or
// have any questions.
//
// ========== Copyright Header End ============================================
module dmu_cru_csr
        (
        clk,
        csrbus_addr,
        csrbus_wr_data,
        csrbus_wr,
        csrbus_valid,
        csrbus_mapped,
        csrbus_done,
        csrbus_read_data,
        rst_l,
        csrbus_src_bus,
        csrbus_acc_vio,
        instance_id,
        dmc_dbg_sel_a_reg_block_sel_hw_read,
        dmc_dbg_sel_a_reg_sub_sel_hw_read,
        dmc_dbg_sel_a_reg_signal_sel_hw_read,
        dmc_dbg_sel_b_reg_block_sel_hw_read,
        dmc_dbg_sel_b_reg_sub_sel_hw_read,
        dmc_dbg_sel_b_reg_signal_sel_hw_read,
        dmc_pcie_cfg_bus_num_hw_read,
        dmc_pcie_cfg_req_id_hw_read
        );

//====================================================
//     Polarity declarations
//====================================================
input  clk;  // Clock signal
input  [`FIRE_CSRBUS_ADDR_WIDTH-1:0] csrbus_addr;  // Address bus
input  [`FIRE_CSRBUS_DATA_WIDTH-1:0] csrbus_wr_data;  // SW write data
input  csrbus_wr;  // Read/Write signal
input  csrbus_valid;  // Valid address
output csrbus_mapped;  // Address is mapped
output csrbus_done;  // Operation is done
output [`FIRE_CSRBUS_DATA_WIDTH-1:0] csrbus_read_data;  // SW read data bus
input  rst_l;  // Reset signal
input  [1:0] csrbus_src_bus;  // Source bus
output csrbus_acc_vio;  // Violation signal
input  instance_id;  // Instance ID
output [`FIRE_DLC_CRU_CSR_DMC_DBG_SEL_A_REG_BLOCK_SEL_INT_SLC] dmc_dbg_sel_a_reg_block_sel_hw_read;
    // This signal provides the current value of dmc_dbg_sel_a_reg_block_sel.
output [`FIRE_DLC_CRU_CSR_DMC_DBG_SEL_A_REG_SUB_SEL_INT_SLC] dmc_dbg_sel_a_reg_sub_sel_hw_read;
    // This signal provides the current value of dmc_dbg_sel_a_reg_sub_sel.
output [`FIRE_DLC_CRU_CSR_DMC_DBG_SEL_A_REG_SIGNAL_SEL_INT_SLC] dmc_dbg_sel_a_reg_signal_sel_hw_read;
    // This signal provides the current value of dmc_dbg_sel_a_reg_signal_sel.
output [`FIRE_DLC_CRU_CSR_DMC_DBG_SEL_B_REG_BLOCK_SEL_INT_SLC] dmc_dbg_sel_b_reg_block_sel_hw_read;
    // This signal provides the current value of dmc_dbg_sel_b_reg_block_sel.
output [`FIRE_DLC_CRU_CSR_DMC_DBG_SEL_B_REG_SUB_SEL_INT_SLC] dmc_dbg_sel_b_reg_sub_sel_hw_read;
    // This signal provides the current value of dmc_dbg_sel_b_reg_sub_sel.
output [`FIRE_DLC_CRU_CSR_DMC_DBG_SEL_B_REG_SIGNAL_SEL_INT_SLC] dmc_dbg_sel_b_reg_signal_sel_hw_read;
    // This signal provides the current value of dmc_dbg_sel_b_reg_signal_sel.
output [`FIRE_DLC_CRU_CSR_DMC_PCIE_CFG_BUS_NUM_INT_SLC] dmc_pcie_cfg_bus_num_hw_read;
    // This signal provides the current value of dmc_pcie_cfg_bus_num.
output [`FIRE_DLC_CRU_CSR_DMC_PCIE_CFG_REQ_ID_INT_SLC] dmc_pcie_cfg_req_id_hw_read;
    // This signal provides the current value of dmc_pcie_cfg_req_id.

//====================================================
//     Type declarations
//====================================================
wire clk;  // Clock signal
wire [`FIRE_CSRBUS_ADDR_WIDTH-1:0] csrbus_addr;  // Address bus
wire [`FIRE_CSRBUS_DATA_WIDTH-1:0] csrbus_wr_data;  // SW write data
wire csrbus_wr;  // Read/Write signal
wire csrbus_valid;  // Valid address
wire csrbus_mapped;  // Address is mapped
wire csrbus_done;  // Operation is done
wire [`FIRE_CSRBUS_DATA_WIDTH-1:0] csrbus_read_data;  // SW read data bus
wire rst_l;  // Reset signal
wire [1:0] csrbus_src_bus;  // Source bus
wire csrbus_acc_vio;  // Violation signal
wire instance_id;  // Instance ID
wire [`FIRE_DLC_CRU_CSR_DMC_DBG_SEL_A_REG_BLOCK_SEL_INT_SLC] dmc_dbg_sel_a_reg_block_sel_hw_read;
    // This signal provides the current value of dmc_dbg_sel_a_reg_block_sel.
wire [`FIRE_DLC_CRU_CSR_DMC_DBG_SEL_A_REG_SUB_SEL_INT_SLC] dmc_dbg_sel_a_reg_sub_sel_hw_read;
    // This signal provides the current value of dmc_dbg_sel_a_reg_sub_sel.
wire [`FIRE_DLC_CRU_CSR_DMC_DBG_SEL_A_REG_SIGNAL_SEL_INT_SLC] dmc_dbg_sel_a_reg_signal_sel_hw_read;
    // This signal provides the current value of dmc_dbg_sel_a_reg_signal_sel.
wire [`FIRE_DLC_CRU_CSR_DMC_DBG_SEL_B_REG_BLOCK_SEL_INT_SLC] dmc_dbg_sel_b_reg_block_sel_hw_read;
    // This signal provides the current value of dmc_dbg_sel_b_reg_block_sel.
wire [`FIRE_DLC_CRU_CSR_DMC_DBG_SEL_B_REG_SUB_SEL_INT_SLC] dmc_dbg_sel_b_reg_sub_sel_hw_read;
    // This signal provides the current value of dmc_dbg_sel_b_reg_sub_sel.
wire [`FIRE_DLC_CRU_CSR_DMC_DBG_SEL_B_REG_SIGNAL_SEL_INT_SLC] dmc_dbg_sel_b_reg_signal_sel_hw_read;
    // This signal provides the current value of dmc_dbg_sel_b_reg_signal_sel.
wire [`FIRE_DLC_CRU_CSR_DMC_PCIE_CFG_BUS_NUM_INT_SLC] dmc_pcie_cfg_bus_num_hw_read;
    // This signal provides the current value of dmc_pcie_cfg_bus_num.
wire [`FIRE_DLC_CRU_CSR_DMC_PCIE_CFG_REQ_ID_INT_SLC] dmc_pcie_cfg_req_id_hw_read;
    // This signal provides the current value of dmc_pcie_cfg_req_id.

//====================================================
//     Logic
//====================================================
wire daemon_transaction_in_progress;
wire daemon_csrbus_mapped;
wire daemon_csrbus_valid;
// vlint flag_dangling_net_within_module off
// vlint flag_net_has_no_load off
wire [`FIRE_CSRBUS_DATA_WIDTH-1:0] daemon_csrbus_wr_data_tmp;
wire [`FIRE_CSRBUS_DATA_WIDTH-1:0] daemon_csrbus_wr_data;
// vlint flag_dangling_net_within_module on
// vlint flag_net_has_no_load on
wire daemon_csrbus_done;
wire [`FIRE_CSRBUS_ADDR_WIDTH-1:0] daemon_csrbus_addr;
wire daemon_csrbus_wr_tmp;
wire daemon_csrbus_wr;

//summit modcovoff -bepgnv
pcie_dcm_daemon #(`FIRE_CSRBUS_ADDR_WIDTH,`FIRE_CSRBUS_DATA_WIDTH) pcie_dcm_daemon (
    .daemon_csrbus_valid (daemon_csrbus_valid),
    .daemon_csrbus_mapped (daemon_csrbus_mapped),
    .daemon_csrbus_wr_data (daemon_csrbus_wr_data_tmp),
    .daemon_csrbus_done (daemon_csrbus_done),
    .daemon_csrbus_addr (daemon_csrbus_addr),
    .daemon_csrbus_wr (daemon_csrbus_wr_tmp),
    .daemon_transaction_in_progress (daemon_transaction_in_progress),
// synopsys translate_off
      .clk(clk),
      .csrbus_read_data (csrbus_read_data),
      .rst_l (rst_l),
// synopsys translate_on
    .csrbus_valid (csrbus_valid),
    .csrbus_mapped (csrbus_mapped),
    .csrbus_wr_data (csrbus_wr_data),
    .csrbus_done (csrbus_done),
    .csrbus_addr (csrbus_addr),
    .csrbus_wr (csrbus_wr)
  );
//summit modcovon -bepgnv

//====================================================================
//   Address decode
//====================================================================
wire dmc_dbg_sel_a_reg_select_pulse;
wire dmc_dbg_sel_b_reg_select_pulse;
wire dmc_pcie_cfg_select_pulse;

dmu_cru_addr_decode dmu_cru_addr_decode
        (
        .clk    (clk),
        .rst_l  (rst_l),
        .daemon_csrbus_valid    (daemon_csrbus_valid),
        .daemon_csrbus_addr     (daemon_csrbus_addr),
        .csrbus_src_bus (csrbus_src_bus),
        .daemon_csrbus_wr       (daemon_csrbus_wr_tmp),
        .daemon_csrbus_wr_out   (daemon_csrbus_wr),
        .daemon_csrbus_wr_data  (daemon_csrbus_wr_data_tmp),
        .daemon_csrbus_wr_data_out      (daemon_csrbus_wr_data),
        .daemon_csrbus_mapped   (daemon_csrbus_mapped),
        .csrbus_acc_vio (csrbus_acc_vio),
        .daemon_transaction_in_progress (daemon_transaction_in_progress),
        .instance_id    (instance_id),
        .daemon_csrbus_done     (daemon_csrbus_done),
        .dmc_dbg_sel_a_reg_select_pulse (dmc_dbg_sel_a_reg_select_pulse),
        .dmc_dbg_sel_b_reg_select_pulse (dmc_dbg_sel_b_reg_select_pulse),
        .dmc_pcie_cfg_select_pulse      (dmc_pcie_cfg_select_pulse)
        );

//====================================================================
//    OUTPUT: csrbus_read_data (pipelining)
//====================================================================
//----- connecting wires
wire stage_mux_only_rst_l;
wire stage_mux_only_daemon_csrbus_wr;
wire [`FIRE_CSRBUS_DATA_WIDTH-1:0] stage_mux_only_daemon_csrbus_wr_data;

//----- Stage: 1 / Grp: default_grp (3 inputs / 1 outputs)
wire [`FIRE_CSRBUS_DATA_WIDTH-1:0] default_grp_read_data_0_out;
wire default_grp_dmc_dbg_sel_a_reg_select_pulse;
wire default_grp_dmc_dbg_sel_b_reg_select_pulse;
wire default_grp_dmc_pcie_cfg_select_pulse;

dmu_cru_default_grp dmu_cru_default_grp
        (
        .clk    (clk),
        .dmc_dbg_sel_a_reg_block_sel_hw_read    (dmc_dbg_sel_a_reg_block_sel_hw_read),
        .dmc_dbg_sel_a_reg_sub_sel_hw_read      (dmc_dbg_sel_a_reg_sub_sel_hw_read),
        .dmc_dbg_sel_a_reg_signal_sel_hw_read   (dmc_dbg_sel_a_reg_signal_sel_hw_read),
        .dmc_dbg_sel_a_reg_select_pulse (default_grp_dmc_dbg_sel_a_reg_select_pulse),
        .dmc_dbg_sel_b_reg_block_sel_hw_read    (dmc_dbg_sel_b_reg_block_sel_hw_read),
        .dmc_dbg_sel_b_reg_sub_sel_hw_read      (dmc_dbg_sel_b_reg_sub_sel_hw_read),
        .dmc_dbg_sel_b_reg_signal_sel_hw_read   (dmc_dbg_sel_b_reg_signal_sel_hw_read),
        .dmc_dbg_sel_b_reg_select_pulse (default_grp_dmc_dbg_sel_b_reg_select_pulse),
        .dmc_pcie_cfg_bus_num_hw_read   (dmc_pcie_cfg_bus_num_hw_read),
        .dmc_pcie_cfg_req_id_hw_read    (dmc_pcie_cfg_req_id_hw_read),
        .dmc_pcie_cfg_select_pulse      (default_grp_dmc_pcie_cfg_select_pulse),
        .rst_l  (stage_mux_only_rst_l),
        .daemon_csrbus_wr_in    (stage_mux_only_daemon_csrbus_wr),
        .daemon_csrbus_wr_data_in       (stage_mux_only_daemon_csrbus_wr_data),
        .read_data_0_out        (default_grp_read_data_0_out)
        );

//----- Stage: 2 / Grp: stage_mux_only (1 inputs / 1 outputs) (Mux only)
wire [`FIRE_CSRBUS_DATA_WIDTH-1:0] stage_mux_only_read_data_0_out;

dmu_cru_stage_mux_only dmu_cru_stage_mux_only
        (
        .clk    (clk),
        .read_data_0    (default_grp_read_data_0_out),
        .dmc_dbg_sel_a_reg_select_pulse (dmc_dbg_sel_a_reg_select_pulse),
        .dmc_dbg_sel_a_reg_select_pulse_out     (default_grp_dmc_dbg_sel_a_reg_select_pulse),
        .dmc_dbg_sel_b_reg_select_pulse (dmc_dbg_sel_b_reg_select_pulse),
        .dmc_dbg_sel_b_reg_select_pulse_out     (default_grp_dmc_dbg_sel_b_reg_select_pulse),
        .dmc_pcie_cfg_select_pulse      (dmc_pcie_cfg_select_pulse),
        .dmc_pcie_cfg_select_pulse_out  (default_grp_dmc_pcie_cfg_select_pulse),
        .daemon_csrbus_wr_in    (daemon_csrbus_wr),
        .daemon_csrbus_wr_out   (stage_mux_only_daemon_csrbus_wr),
        .daemon_csrbus_wr_data_in       (daemon_csrbus_wr_data),
        .daemon_csrbus_wr_data_out      (stage_mux_only_daemon_csrbus_wr_data),
        .read_data_0_out        (stage_mux_only_read_data_0_out),
        .rst_l  (rst_l),
        .rst_l_out      (stage_mux_only_rst_l)
        );

//----- OUTPUT: csrbus_read_data
assign csrbus_read_data = stage_mux_only_read_data_0_out;

endmodule // dmu_cru_csr