diagnostics - Perl compiler pragma to force verbose warning diagnostics
splain - standalone program to do the same thing
use diagnostics -verbose;
splain [-v] [-p] diag.out
=head2 The C<diagnostics> Pragma
This module extends the terse diagnostics normally emitted by both the
perl compiler and the perl interpreter, augmenting them with the more
explicative and endearing descriptions found in L<perldiag>. Like the
other pragmata, it affects the compilation phase of your program rather
than merely the execution phase.
To use in your program as a pragma, merely invoke
at the start (or near the start) of your program. (Note
that this I<does> enable perl's B<-w> flag.) Your whole
compilation will then be subject(ed :-) to the enhanced diagnostics.
These still go out B<STDERR>.
Due to the interaction between runtime and compiletime issues,
and because it's probably not a very good idea anyway,
you may not use C<no diagnostics> to turn them off at compiletime.
However, you may control their behaviour at runtime using the
disable() and enable() methods to turn them off and on respectively.
The B<-verbose> flag first prints out the L<perldiag> introduction before
any other diagnostics. The $diagnostics::PRETTY variable can generate nicer
escape sequences for pagers.
Warnings dispatched from perl itself (or more accurately, those that match
descriptions found in L<perldiag>) are only displayed once (no duplicate
descriptions). User code generated warnings ala warn() are unaffected,
allowing duplicate user messages to be displayed.
=head2 The I<splain> Program
While apparently a whole nuther program, I<splain> is actually nothing
more than a link to the (executable) F<diagnostics.pm> module, as well as
a link to the F<diagnostics.pod> documentation. The B<-v> flag is like
the C<use diagnostics -verbose> directive.
The B<-p> flag is like the
$diagnostics::PRETTY variable. Since you're post-processing with
I<splain>, there's no sense in being able to enable() or disable() processing.
Output from I<splain> is directed to B<STDOUT>, unlike the pragma.
The following file is certain to trigger a few errors at both
print NOWHERE "nothing\n";
print STDERR "\n\tThis message should be unadorned.\n";
warn "\tThis is a user warning";
print "\nDIAGNOSTIC TESTER: Please enter a <CR> here: ";
my $a, $b = scalar <STDIN>;
If you prefer to run your program first and look at its problem
perl -w test.pl 2>test.out
Note that this is not in general possible in shells of more dubious heritage,
(perl -w test.pl >/dev/tty) >& test.out
Because you just moved the existing B<stdout> to somewhere else.
If you don't want to modify your source code, but still have on-the-fly
exec 3>&1; perl -w test.pl 2>&1 1>&3 3>&- | splain 1>&2 3>&-
If you want to control warnings on the fly, do something like this.
Make sure you do the C<use> first, or you won't be able to get
at the enable() or disable() methods.
use diagnostics; # checks entire compilation phase
print "\ntime for 1st bogus diags: SQUAWKINGS\n";
print "done with 1st bogus\n";
disable diagnostics; # only turns off runtime warnings
print "\ntime for 2nd bogus: (squelched)\n";
print "done with 2nd bogus\n";
enable diagnostics; # turns back on runtime warnings
print "\ntime for 3rd bogus: SQUAWKINGS\n";
print "done with 3rd bogus\n";
print "\ntime for 4th bogus: (squelched)\n";
print "done with 4th bogus\n";
Diagnostic messages derive from the F<perldiag.pod> file when available at
runtime. Otherwise, they may be embedded in the file itself when the
splain package is built. See the F<Makefile> for details.
If an extant $SIG{__WARN__} handler is discovered, it will continue
to be honored, but only after the diagnostics::splainthis() function
(the module's $SIG{__WARN__} interceptor) has had its way with your
There is a $diagnostics::DEBUG variable you may set if you're desperately
curious what sorts of things are being intercepted.
BEGIN { $diagnostics::DEBUG = 1 }
Not being able to say "no diagnostics" is annoying, but may not be
The C<-pretty> directive is called too late to affect matters.
You have to do this instead, and I<before> you load the module.
BEGIN { $diagnostics::PRETTY = 1 }
I could start up faster by delaying compilation until it should be
needed, but this gets a "panic: top_level" when using the pragma form
While it's true that this documentation is somewhat subserious, if you use
a program named I<splain>, you should expect a bit of whimsy.
Tom Christiansen <F<tchrist@mox.perl.com>>, 25 June 1995.
my($privlib, $archlib) = @Config{qw(privlibexp archlibexp)};
$privlib = VMS
::Filespec
::unixify
($privlib);
$archlib = VMS
::Filespec
::unixify
($archlib);
"$archlib/pod/perldiag.pod",
"$privlib/pod/perldiag-$Config{version}.pod",
"$privlib/pod/perldiag.pod",
"$archlib/pods/perldiag.pod",
"$privlib/pods/perldiag-$Config{version}.pod",
"$privlib/pods/perldiag.pod",
# handy for development testing of new warnings etc
unshift @trypod, "./pod/perldiag.pod" if -e
"pod/perldiag.pod";
(my $PODFILE) = ((grep { -e
} @trypod), $trypod[$#trypod])[0];
# just updir one from each lib dir, we'll find it ...
($PODFILE) = grep { -e
} map { "$_:pod:perldiag.pod" } @INC;
my $WHOAMI = ref bless []; # nobody's business, prolly not even mine
my(%HTML_2_Troff, %HTML_2_Latin_1, %HTML_2_ASCII_7);
our $opt_p = our $opt_d = our $opt_v = our $opt_f = '';
Getopt
::Std
::getopts
('pdvf:')
or die "Usage: $0 [-v] [-p] [-f splainpod]";
$PODFILE = $opt_f if $opt_f;
if (open(POD_DIAG
, $PODFILE)) {
warn "Happy happy podfile from real $PODFILE\n" if $DEBUG;
for my $file ( (map { "$_/$WHOAMI.pm" } @INC), $0) {
warn "Checking $file\n" if $DEBUG;
if (open(POD_DIAG
, $file)) {
/^__END__\s*# wish diag dbase were more accessible/;
print STDERR
"podfile is $file\n" if $DEBUG;
print STDERR
"podfile is <DATA>\n" if $DEBUG;
die "couldn't find diagnostic data in $PODFILE @INC $0";
'amp' => '&', # ampersand
'lt' => '<', # left chevron, less-than
'gt' => '>', # right chevron, greater-than
'quot' => '"', # double quote
"Aacute" => "A\\*'", # capital A, acute accent
'amp' => '&', # ampersand
'lt' => '<', # left chevron, less-than
'gt' => '>', # right chevron, greater-than
'quot' => '"', # double quote
"Aacute" => "\xC1" # capital A, acute accent
'amp' => '&', # ampersand
'lt' => '<', # left chevron, less-than
'gt' => '>', # right chevron, greater-than
'quot' => '"', # double quote
"Aacute" => "A" # capital A, acute accent
$PRETTY ? \
%HTML_2_Latin_1 : \
%HTML_2_ASCII_7;
*THITHER
= $standalone ?
*STDOUT
: *STDERR
;
#local \$^W = 0; # recursive warnings we do NOT need!
print STDERR
"FINISHING COMPILATION for $_\n" if $DEBUG;
sub noop
{ return $_[0] } # spensive for a noop
sub bold
{ my $str =$_[0]; $str =~ s/(.)/$1\b$1/g; return $str; }
sub italic
{ my $str = $_[0]; $str =~ s/(.)/_\b$1/g; return $str; }
s/[BC]<(.*?)>/bold($1)/ges;
s/[LIF]<(.*?)>/italic($1)/ges;
if ( $header eq 'DESCRIPTION' &&
( /Optional warnings are enabled/
|| /Some of these messages are generic./
unless ( s/=item (.*?)\s*\z//) {
if ( s/=head1\sDESCRIPTION//) {
$msg{$header = 'DESCRIPTION'} = '';
elsif( s/^=for\s+diagnostics\s*\n(.*?)\s*\z// ) {
if( $for_item ) { $header = $for_item; undef $for_item }
while( $header =~ /[;,]\z/ ) {
<POD_DIAG
> =~ /^\s*(.*?)\s*\z/;
# strip formatting directives in =item line
$header =~ s/[A-Z]<(.*?)>/$1/g;
if ($header =~ /%[csd]/) {
my $rhs = my $lhs = $header;
if ($lhs =~ s/(.*?)%d(?!%d)(.*)/\Q$1\E-?\\d+\Q$2\E/g) {
# if i had lookbehind negations,
# i wouldn't have to do this \377 noise
$lhs =~ s/(.*?)%s/\Q$1\E.*?\377/g;
$lhs =~ s/\377([^\377]*)$/\Q$1\E/;
$lhs =~ s/\.\*\?$/.*/; # Allow %s at the end to eat it all
$transmo .= " s{^$lhs}\n {\Q$rhs\E}s\n\t&& return 1;\n";
$transmo .= " m{^\Q$header\E} && return 1;\n";
print STDERR
"$WHOAMI: Duplicate entry: \"$header\"\n"
close POD_DIAG
unless *main
::DATA
eq *POD_DIAG
;
die "No diagnostics?" unless %msg;
$transmo .= " return 0;\n}\n";
print STDERR
$transmo if $DEBUG;
if (!@ARGV and -t STDIN
) { print STDERR
"$0: Reading from STDIN\n" }
while (defined (my $error = <>)) {
splainthis
($error) || print THITHER
$error;
$^W
= 1; # yup, clobbered the global variable;
# tough, if you want diags, you want diags.
return if defined $SIG{__WARN__
} && ($SIG{__WARN__
} eq \
&warn_trap
);
print STDERR
"$0: I'm afraid it's too late for prettiness.\n";
$oldwarn = $SIG{__WARN__
};
$SIG{__WARN__
} = \
&warn_trap
;
$SIG{__DIE__
} = \
&death_trap
;
return unless $SIG{__WARN__
} eq \
&warn_trap
;
$SIG{__WARN__
} = $oldwarn || '';
$SIG{__DIE__
} = $olddie || '';
if (caller eq $WHOAMI or !splainthis
($warning)) {
&$oldwarn if defined $oldwarn and $oldwarn and $oldwarn ne \
&warn_trap
;
# See if we are coming from anywhere within an eval. If so we don't
# want to explain the exception because it's going to get caught.
my $caller = (caller($i++))[3] or last;
if ($caller eq '(eval)') {
splainthis
($exception) unless $in_eval;
if (caller eq $WHOAMI) { print STDERR
"INTERNAL EXCEPTION: $exception"; }
&$olddie if defined $olddie and $olddie and $olddie ne \
&death_trap
;
# We don't want to unset these if we're coming from an eval because
# then we've turned off diagnostics.
# Switch off our die/warn handlers so we don't wind up in our own
$SIG{__DIE__
} = $SIG{__WARN__
} = '';
# Have carp skip over death_trap() when showing the stack trace.
local($Carp::CarpLevel
) = 1;
confess
"Uncaught exception from user code:\n\t$exception";
# up we go; where we stop, nobody knows, but i think we die now
# but i'm deeply afraid of the &$olddie guy reraising and us getting
# into an indirect recursion loop
### &finish_compilation unless %msg;
s/, <.*?> (?:line|chunk).*$//;
my $real = s/(.*?) at .*? (?:line|chunk) \d+.*/$1/;
if ($exact_duplicate{$orig}++) {
return 0 unless &transmo
;
print THITHER
"$orig (#$old_diag{$_})\n";
$old_diag{$_} = ++$count;
print THITHER
"\n" if $wantspace;
print THITHER
"$orig (#$old_diag{$_})\n";
print THITHER
" **** Error #$old_diag{$_} ",
($real ?
"is" : "appears to be"),
" an unknown diagnostic message.\n\n";
if ($VERBOSE and not $count) {
print THITHER
&{$PRETTY ? \
&bold
: \
&noop
}("DESCRIPTION OF DIAGNOSTICS"),
?
do { $HTML_Escapes{$1} }
warn "Unknown escape: E<$1> in $_";
if (length($line) > 79 and index($line, "\n") == -1) {
my $space_place = rindex($line, ' ', 79);
if ($space_place != -1) {
substr($line, $space_place, 1) = "\n\t";
1 unless $standalone; # or it'll complain about itself
__END__
# wish diag dbase were more accessible