verif/diag/assembly/arch/error/adv/n2_err_adv_niu_mix_rx_1.s

/*
* ========== Copyright Header Begin ==========================================
*
* OpenSPARC T2 Processor File: n2_err_adv_niu_mix_rx_1.s
* Copyright (C) 1995-2007 Sun Microsystems, Inc. All Rights Reserved
* 4150 Network Circle, Santa Clara, California 95054, U.S.A.
*
* DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
*
* For the avoidance of doubt, and except that if any non-GPL license
* choice is available it will apply instead, Sun elects to use only
* the General Public License version 2 (GPLv2) at this time for any
* software where a choice of GPL license versions is made
* available with the language indicating that GPLv2 or any later version
* may be used, or where a choice of which version of the GPL is applied is
* otherwise unspecified.
*
* Please contact Sun Microsystems, Inc., 4150 Network Circle, Santa Clara,
* CA 95054 USA or visit www.sun.com if you need additional information or
* have any questions.
*
*
* ========== Copyright Header End ============================================
*/
#define H_HT0_Hw_Corrected_Error_0x63 My_Corrected_ECC_error_trap
#define H_HT0_Sw_Recoverable_Error_0x40  My_Recoverable_Sw_error_trap


/* #define MAIN_PAGE_NUCLEUS_ALSO */ /* Access main in priviledge mode */
#define MAIN_PAGE_HV_ALSO

#include "hboot.s"
#include "niu_defines.h"

#define ERR_BITS        0x184800004

/************************************************************************
   Test case code start
 ************************************************************************/
.text
.global main
.global  My_Corrected_ECC_error_trap
.global  My_Recoverable_Sw_error_trap

main:
        ta T_CHANGE_HPRIV
        nop

!#include "niu_init.h"
!
! Thread 0 Start
!
!
!thread_0:
        nop


        /************************************
                RAS
        *************************************/
clear_esr_first:
        setx    SOC_ESR_REG, %l7, %i0
        stx     %g0, [%i0]


set_ejr_rdd:
        setx     ERR_BITS, %l7, %g5

        setx    SOC_EJR_REG, %l7, %i3
        stx     %g5, [%i3]
        membar  0x40


        /*************************************/


/************************************************************************
   First call the Vera, so that values are updated in Memory and
   then read those values from assembly and program the registers
 ************************************************************************/
P_NIU_RxInitDma:
        nop             !$EV trig_pc_d(1, @VA(.MAIN.P_NIU_RxInitDma)) -> NIU_InitRxDma(RXDMA_CHNL, RX_DESC_RING_LENGTH, RX_COMPL_RING_LEN, RBR_CONFIG_B_DATA, RX_INITIAL_KICK, NIU_Xlate_On)

        setx    0x5, %g1, %g4                   ! Delay for Vera to complete
delay_loop_Rx:
        ldxa    [%g2]ASI_PRIMARY_LITTLE, %g5
        nop
        nop
        nop
        nop
        dec     %g4
        brnz    %g4, delay_loop_Rx
        nop

        nop
        setx    RXDMA_CHNL, %g1, %o0
        setx    RX_DESC_RING_LENGTH, %g1, %o1
        setx    RX_COMPL_RING_LEN, %g1, %o2
        setx    RBR_CONFIG_B_DATA, %g1, %o3
        setx    RX_INITIAL_KICK, %g1, %o4
        call    NiuInitRxDma
        nop

P_NIU_RxPkt_Conf:
        nop             !$EV trig_pc_d(1, @VA(.MAIN.P_NIU_RxPkt_Conf)) -> NIU_RxPktConf(RXMAC_PKTCNT, MAC_ID)
        ldxa    [%g2]ASI_PRIMARY_LITTLE, %g5    ! Just for Delay
        nop


P_NIU_Rx_GenPkt:
        setx    RXMAC_PKTCNT, %g1, %g6          ! Packet count
        nop
Rx_pktcnt_loop:
        nop             !$EV trig_pc_d(1, @VA(.MAIN.Rx_pktcnt_loop)) -> NIU_RxGenPkt(MAC_ID, RXDMA_CHNL, 1, MAC_PKT_LEN, 0x0, RX_NIU_MULTI_DMA, 1)
        ldxa    [%g2]ASI_PRIMARY_LITTLE, %g5    ! just for delay
        nop
        dec     %g6
        brnz    %g6, Rx_pktcnt_loop
        nop

        setx    loop_count, %g1, %g4
delay_loop:
        ldxa    [%g2]ASI_PRIMARY_LITTLE, %g5
        nop
        nop
        nop
        nop
        dec     %g4
        brnz    %g4, delay_loop
        nop


test_passed:
        nop
        EXIT_GOOD

!.global test_failed
test_failed:
        EXIT_BAD


/************************************************************************
        RAS
        Trap Handlers
 ************************************************************************/
My_Recoverable_Sw_error_trap:
        ! Signal trap taken
        setx  EXECUTED, %l0, %o6
        ! save trap type value
        rdpr  %tt, %o7

        inc     %i7

check_desr_tt40:
        ldxa  [%g0]0x4c, %g2
        nop
        setx    0xb300000000000000, %l0, %g3
        subcc   %g2, %g3, %g4
        brnz    %g4, test_failed
        nop

check_per_tt40:
        setx    SOC_PER_REG, %l7, %i0
        ldx     [%i0], %i1
        setx    0x8000000000000000, %l7, %o3    !valid bit
        set     0x1, %i2
        sllx    %i2, ERR_FIELD, %i3
        or      %i3, %o3, %i4
        sub     %i1, %i4, %i5
        brnz    %i5, test_failed
        nop

clear_per_tt40:
        setx    SOC_PER_REG, %l7, %i0
        stx     %g0, [%i0]
        nop
        done
        nop


My_Corrected_ECC_error_trap:
        ! Signal trap taken
        setx  EXECUTED, %l0, %o6
        ! save trap type value
        rdpr  %tt, %o7

        inc     %i7

check_desr_tt63:
        ldxa  [%g0]0x4c, %g2
        nop
        setx    0x8b00000000000000, %l0, %g3
        subcc   %g2, %g3, %g4
        brnz    %g4, test_failed

check_per_tt63:
        setx    SOC_PER_REG, %l7, %i0
        ldx     [%i0], %i1
        setx    0x8000000000000000, %l7, %o3    !valid bit
        set     0x1, %i2
        sllx    %i2, ERR_FIELD, %i3
        or      %i3, %o3, %i4
        sub     %i1, %i4, %i5
        brnz    %i5, test_failed
        nop

clear_per_tt63:
        setx    SOC_PER_REG, %l7, %i0
        stx     %g0, [%i0]
        nop
        retry
        nop

/************************************************************************
   Test case data start
 ************************************************************************/
/* These initialization is temporary, as there looks some bug in mempli */
!
!SECTION       SetRngConfig_init data_va=0x100000000
!attr_data {
!       Name = SetRngConfig_init,
!       hypervisor,
!       compressimage
!       }
!.data
!SetRngConfig_init:
!        .xword 0x0060452301000484
/************************************************************************/

SECTION       SetRxLogMask1_init data_va=0x200000100
attr_data {
        Name = SetRxLogMask1_init,
        hypervisor,
        compressimage
        }
.data
SetRxLogMask1_init:
        .xword 0x0060452301000484
/************************************************************************/

SECTION       SetRxLogVal1_init data_va=0x200000200
attr_data {
        Name = SetRxLogVal1_init,
        hypervisor,
        compressimage
        }
.data
SetRxLogVal1_init:
        .xword 0x0060452301000484
/************************************************************************/

SECTION       SetRxLogRelo1_init data_va=0x200000300
attr_data {
        Name = SetRxLogRelo1_init,
        hypervisor,
        compressimage
        }
.data
SetRxLogRelo1_init:
        .xword 0x0060452301000484
/************************************************************************/

SECTION       SetRxLogPgVld_init data_va=0x200000400
attr_data {
        Name = SetRxLogPgVld_init,
        hypervisor,
        compressimage
        }
.data
SetRxLogPgVld_init:
        .xword 0x0060452301000484
/************************************************************************/
SECTION       SetRbrConfig_A_init data_va=0x200000500
attr_data {
        Name = SetRbrConfig_A_init,
        hypervisor,
        compressimage
        }
.data
SetRbrConfig_A_init:
        .xword 0x0060452301000484
/************************************************************************/
SECTION       SetRbrConfig_B_init data_va=0x200000600
attr_data {
        Name = SetRbrConfig_B_init,
        hypervisor,
        compressimage
        }
.data
SetRbrConfig_B_init:
        .xword 0x0060452301000484
/************************************************************************/
SECTION       SetRcrConfig_A_init data_va=0x200000700
attr_data {
        Name = SetRcrConfig_A_init,
        hypervisor,
        compressimage
        }
.data
SetRcrConfig_A_init:
        .xword 0x0060452301000484
/************************************************************************/
SECTION       SetRxDmaCfig_1_0_init data_va=0x200000800
attr_data {
        Name = SetRxDmaCfig_1_0_init,
        hypervisor,
        compressimage
        }
.data
SetRxDmaCfig_1_0_init:
        .xword 0x0060452301000484
/************************************************************************/
SECTION       SetRxdmaCfig2Start_init data_va=0x200000900
attr_data {
        Name = SetRxdmaCfig2Start_init,
        hypervisor,
        compressimage
        }
.data
SetRxdmaCfig2Start_init:
        .xword 0x0060452301000484
/************************************************************************/
SECTION       SetRxDmaCfig_1_1_init data_va=0x200000a00
attr_data {
        Name = SetRxDmaCfig_1_1_init,
        hypervisor,
        compressimage
        }
.data
SetRxDmaCfig_1_1_init:
        .xword 0x0060452301000484

/************************************************************************/

SECTION       SetRxRingKick_init data_va=0x200000b00
attr_data {
        Name = SetRxRingKick_init,
        hypervisor,
        compressimage
        }
.data
SetRxRingKick_init:
        .xword 0x0060452301000484
/************************************************************************/

SECTION       SetRxLogMask2_init data_va=0x200000c00
attr_data {
        Name = SetRxLogMask2_init,
        hypervisor,
        compressimage
        }
.data
SetRxLogMask2_init:
        .xword 0x0060452301000484
/************************************************************************/

SECTION       SetRxLogVal2_init data_va=0x200000d00
attr_data {
        Name = SetRxLogVal2_init,
        hypervisor,
        compressimage
        }
.data
SetRxLogVal2_init:
        .xword 0x0060452301000484
/************************************************************************/

SECTION       SetRxLogRelo2_init data_va=0x200000e00
attr_data {
        Name = SetRxLogRelo2_init,
        hypervisor,
        compressimage
        }
.data
SetRxLogRelo2_init:
        .xword 0x0060452301000484

/************************************************************************/