* ========== Copyright Header Begin ==========================================
* OpenSPARC T2 Processor File: n2_err_siu_rx.s
* Copyright (C) 1995-2007 Sun Microsystems, Inc. All Rights Reserved
* 4150 Network Circle, Santa Clara, California 95054, U.S.A.
* DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
* For the avoidance of doubt, and except that if any non-GPL license
* choice is available it will apply instead, Sun elects to use only
* the General Public License version 2 (GPLv2) at this time for any
* software where a choice of GPL license versions is made
* available with the language indicating that GPLv2 or any later version
* may be used, or where a choice of which version of the GPL is applied is
* Please contact Sun Microsystems, Inc., 4150 Network Circle, Santa Clara,
* CA 95054 USA or visit www.sun.com if you need additional information or
* ========== Copyright Header End ============================================
#define MAIN_PAGE_HV_ALSO
/************************************************************************
************************************************************************/
/******************************
******************************/
setx SOC_ESR_REG, %l7, %i0
setx SOC_EJR_REG, %l7, %i3
/********************************/
/************************************************************************
First call the Vera, so that values are updated in Memory and
then read those values from assembly and program the registers
************************************************************************/
nop !$EV trig_pc_d(1, @VA(.MAIN.P_NIU_RxInitDma)) -> NIU_InitRxDma(RXDMA_CHNL_UE, RX_DESC_RING_LENGTH_UE, RX_RING_START_ADDRESS_UE, RBR_CONFIG_B_DATA_UE, RX_INITIAL_KICK_UE)
setx 0x5, %g1, %g4 ! Delay for Vera to complete
ldxa [%g2]ASI_PRIMARY_LITTLE, %g5
setx RXDMA_CHNL, %g1, %o0
setx RX_DESC_RING_LENGTH, %g1, %o1
setx RX_RING_START_ADDRESS, %g1, %o2
setx RBR_CONFIG_B_DATA, %g1, %o3
setx RX_INITIAL_KICK, %g1, %o4
nop !$EV trig_pc_d(1, @VA(.MAIN.P_NIU_RxPkt_Conf)) -> NIU_RxPktConf(RXMAC_PKTCNT_UE)
ldxa [%g2]ASI_PRIMARY_LITTLE, %g5 ! Just for Delay
setx RXMAC_PKTCNT, %g1, %g6 ! Packet count
nop !$EV trig_pc_d(1, @VA(.MAIN.Rx_pktcnt_loop)) -> NIU_RxGenPkt(MAC_ID, RXDMA_CHNL_UE, 1, MAC_PKT_LEN_UE, 1)
ldxa [%g2]ASI_PRIMARY_LITTLE, %g5 ! just for delay
ldxa [%g2]ASI_PRIMARY_LITTLE, %g5
/******************************
******************************/
setx SOC_ESR_REG, %l7, %i0
setx 0x8000000000000000, %l7, %o3 !valid bit
/********************************/
/************************************************************************
************************************************************************/
/* These initialization is temporary, as there looks some bug in mempli */
SECTION SetRngConfig_init data_va=0x100000000
Name = SetRngConfig_init,
.xword 0x0060452301000484
/************************************************************************/
SECTION SetRxLogMask1_init data_va=0x200000100
Name = SetRxLogMask1_init,
.xword 0x0060452301000484
/************************************************************************/
SECTION SetRxLogVal1_init data_va=0x200000200
Name = SetRxLogVal1_init,
.xword 0x0060452301000484
/************************************************************************/
SECTION SetRxLogRelo1_init data_va=0x200000300
Name = SetRxLogRelo1_init,
.xword 0x0060452301000484
/************************************************************************/
SECTION SetRxLogPgVld_init data_va=0x200000400
Name = SetRxLogPgVld_init,
.xword 0x0060452301000484
/************************************************************************/
SECTION SetRbrConfig_A_init data_va=0x200000500
Name = SetRbrConfig_A_init,
.xword 0x0060452301000484
/************************************************************************/
SECTION SetRbrConfig_B_init data_va=0x200000600
Name = SetRbrConfig_B_init,
.xword 0x0060452301000484
/************************************************************************/
SECTION SetRcrConfig_A_init data_va=0x200000700
Name = SetRcrConfig_A_init,
.xword 0x0060452301000484
/************************************************************************/
SECTION SetRxDmaCfig_1_0_init data_va=0x200000800
Name = SetRxDmaCfig_1_0_init,
.xword 0x0060452301000484
/************************************************************************/
SECTION SetRxdmaCfig2Start_init data_va=0x200000900
Name = SetRxdmaCfig2Start_init,
.xword 0x0060452301000484
/************************************************************************/
SECTION SetRxDmaCfig_1_1_init data_va=0x200000a00
Name = SetRxDmaCfig_1_1_init,
.xword 0x0060452301000484
/************************************************************************/
SECTION SetRxRingKick_init data_va=0x200000b00
Name = SetRxRingKick_init,
.xword 0x0060452301000484
/************************************************************************/
SECTION SetRxLogMask2_init data_va=0x200000c00
Name = SetRxLogMask2_init,
.xword 0x0060452301000484
/************************************************************************/
SECTION SetRxLogVal2_init data_va=0x200000d00
Name = SetRxLogVal2_init,
.xword 0x0060452301000484
/************************************************************************/
SECTION SetRxLogRelo2_init data_va=0x200000e00
Name = SetRxLogRelo2_init,
.xword 0x0060452301000484
/************************************************************************/