Initial commit of OpenSPARC T2 design and verification files.
[OpenSPARC-T2-DV] / verif / diag / assembly / arch / error / siu / n2_err_siu_trap.s
/*
* ========== Copyright Header Begin ==========================================
*
* OpenSPARC T2 Processor File: n2_err_siu_trap.s
* Copyright (C) 1995-2007 Sun Microsystems, Inc. All Rights Reserved
* 4150 Network Circle, Santa Clara, California 95054, U.S.A.
*
* DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
* For the avoidance of doubt, and except that if any non-GPL license
* choice is available it will apply instead, Sun elects to use only
* the General Public License version 2 (GPLv2) at this time for any
* software where a choice of GPL license versions is made
* available with the language indicating that GPLv2 or any later version
* may be used, or where a choice of which version of the GPL is applied is
* otherwise unspecified.
*
* Please contact Sun Microsystems, Inc., 4150 Network Circle, Santa Clara,
* CA 95054 USA or visit www.sun.com if you need additional information or
* have any questions.
*
*
* ========== Copyright Header End ============================================
*/
#define H_HT0_Hw_Corrected_Error_0x63 My_Corrected_ECC_error_trap
#define H_HT0_Sw_Recoverable_Error_0x40 My_Recoverable_Sw_error_trap
/* #define MAIN_PAGE_NUCLEUS_ALSO */ /* Access main in priviledge mode */
#define MAIN_PAGE_HV_ALSO
#include "err_defines.h"
#include "hboot.s"
#include "niu_defines.h"
/************************************************************************
Test case code start
************************************************************************/
.text
.global main
.global My_Corrected_ECC_error_trap
.global My_Recoverable_Sw_error_trap
main:
ta T_CHANGE_HPRIV
nop
#include "niu_init.h"
clr %i6
clr %i7
!
! Thread 0 Start
!
!
thread_0:
Init_flow:
nop ! $EV trig_pc_d(1, @VA(.MAIN.Init_flow)) -> pktGenConfig(MAC_ID)
P_TxDMAActivate:
setx MAC_ID, %g1, %o0 ! 1st Parameter
setx SetTxDMAActive_list, %g1, %o1 ! 2st parameter
call SetTxDMAActive
nop ! $EV trig_pc_d(1, @VA(.MAIN.P_TxDMAActivate)) -> NIU_TxDMAActivate (MAC_ID, TxDmaActive_list)
P_AddTxChannels :
nop ! $EV trig_pc_d(1, @VA(.MAIN.P_AddTxChannels)) -> NIU_AddTxChannels(MAC_ID, NIU_TxDmaNoUE)
ldxa [%g2]ASI_PRIMARY_LITTLE, %g5 ! Just for delay
nop
P_SetTxMaxBurst :
setx NIU_TxDmaNo, %g1, %o0 ! 1st parameter :
setx SetTxMaxBurst_Data, %g1, %o1 ! 2nd parameter
call SetTxMaxBurst
nop ! $EV trig_pc_d(1, @VA(.MAIN.P_SetTxMaxBurst)) -> NIU_SetTxMaxBurst (MAC_ID, NIU_TxDmaNoUE, TxMaxBurst_Data)
ldxa [%g2]ASI_PRIMARY_LITTLE, %g5 ! Just for delay
nop
P_InitTxDma:
setx NIU_TxDmaNo, %g1, %o0 ! 1st parameter :
nop ! $EV trig_pc_d(1, @VA(.MAIN.P_InitTxDma)) -> NIU_InitTxDma (MAC_ID, NIU_TxDmaNoUE)
call InitTxDma
nop
ldxa [%g2]ASI_PRIMARY_LITTLE, %g5 ! Just for delay
nop
clear_esr_first:
setx SOC_ESR_REG, %l7, %i0
stx %g0, [%i0]
set_ejr:
set 0x1, %i1
sllx %i1, ERR_FIELD, %i2
setx SOC_EJR_REG, %l7, %i3
stx %i2, [%i3]
membar 0x40
eie_reg_ones:
setx SOC_EIE_REG, %l7, %g5
stx %i2, [%g5]
membar 0x40
Gen_Packet:
nop ! $EV trig_pc_d(1, @VA(.MAIN.Gen_Packet)) -> TxPktGen(MAC_ID, NIU_TxDmaNoUE,NiuTxPktCountUE)
nop
setx 0x5, %g1, %g4
delay_loop_tmp:
ldxa [%g2]ASI_PRIMARY_LITTLE, %g5
nop
nop
nop
nop
dec %g4
brnz %g4, delay_loop_tmp
nop
SetTxRingKick:
setx 0x100000100, %g1, %g2 ! $EV trig_pc_d(1, @VA(.MAIN.SetTxRingKick)) -> NIU_SetTxRingKick(MAC_ID, NIU_TxDmaNoUE)
setx NIU_TxDmaNo, %g1, %o0
ldxa [%g2]ASI_PRIMARY_LITTLE, %g3
nop
mulx %o0, 0x200, %g5
setx TX_RING_KICK_Addr, %g1, %g2
add %g2, %g5, %g2
stxa %g3, [%g2]ASI_PRIMARY_LITTLE
nop
SetTxCs :
setx NIU_TxDmaNo, %g1, %o0
setx TX_CS_Data, %g1, %g3
mulx %o0, 0x200, %g5
setx TX_CS_Addr, %g1, %g2
add %g2, %g5, %g2
stxa %g3, [%g2]ASI_PRIMARY_LITTLE
nop
setx loop_count, %g1, %g4
delay_loop:
ldxa [%g2]ASI_PRIMARY_LITTLE, %g5
nop
nop
nop
nop
dec %g4
brnz %g4, delay_loop
nop
! ESR is cleared in INT
!but dont expect it to be zero; as a follow up
! transaction can again set it
read_esr:
setx SOC_ESR_REG, %l7, %i0
ldx [%i0], %i1
! sub %i1, %g0, %i5
! brnz %i5, test_failed
setx 0x8000000000000000, %l7, %o3 !valid bit
set 0x1, %i2
sllx %i2, ERR_FIELD, %i3
or %i3, %o3, %i4
#ifdef CE
read_esr_nonzero:
sub %i1, %i4, %i5
brnz %i5, test_failed
nop
#endif
#ifdef UE
read_esr_zero:
sub %i1, %g0, %i5
brnz %i5, test_failed
nop
#endif
check_per:
set 0x1, %i2
sllx %i2, ERR_FIELD, %i3
or %i3, %o3, %i4
setx SOC_PER_REG, %l7, %i0
ldx [%i0], %i1
sub %i1, %i4, %i5
brnz %i5, test_failed
nop
! Check if a Corrected ECC Trap happened
check_error_trap:
setx EXECUTED, %l1, %l0
cmp %o6, %l0
bne test_failed
nop
mov TT, %l0
cmp %o7, %l0
bne test_failed
nop
test_passed:
nop
EXIT_GOOD
test_failed:
EXIT_BAD
/************************************************************************
Trap Handlers
************************************************************************/
My_Recoverable_Sw_error_trap:
! Signal trap taken
setx EXECUTED, %l0, %o6
! save trap type value
rdpr %tt, %o7
retry
nop
My_Corrected_ECC_error_trap:
! Signal trap taken
setx EXECUTED, %l0, %o6
! save trap type value
rdpr %tt, %o7
retry
nop
/************************************************************************
Test case data start
************************************************************************/
/* These initialization is temporary, as there looks some bug in mempli */
SECTION SetRngConfig_init data_va=0x100000000
attr_data {
Name = SetRngConfig_init,
hypervisor,
compressimage
}
.data
SetRngConfig_init:
.xword 0x0060452301000484
/************************************************************************/
SECTION SetTxRingKick_init data_va=0x100000100
attr_data {
Name = SetTxRingKick_init,
hypervisor,
compressimage
}
.data
SetTxRingKick_init:
.xword 0x0060452301000484
/************************************************************************/
SECTION SetTxLPMask1_init data_va=0x100000200
attr_data {
Name = SetTxLPMask1_init,
hypervisor,
compressimage
}
.data
SetTxLPMask1_init:
.xword 0x0060452301000484
/************************************************************************/
SECTION SetTxLPValue1_init data_va=0x100000300
attr_data {
Name = SetTxLPValue1_init,
hypervisor,
compressimage
}
.data
SetTxLPValue1_init:
.xword 0x0060452301000484
/************************************************************************/
SECTION SetTxLPRELOC1_init data_va=0x100000400
attr_data {
Name = SetTxLPRELOC1_init,
hypervisor,
compressimage
}
.data
SetTxLPRELOC1_init:
.xword 0x0060452301000484
/************************************************************************/
SECTION SetTxLPMask2_init data_va=0x100000500
attr_data {
Name = SetTxLPMask2_init,
hypervisor,
compressimage
}
.data
SetTxLPMask2_init:
.xword 0x0060452301000484
/************************************************************************/
SECTION SetTxLPValue2_init data_va=0x100000600
attr_data {
Name = SetTxLPValue2_init,
hypervisor,
compressimage
}
.data
SetTxLPValue2_init:
.xword 0x0060452301000484
/************************************************************************/
SECTION SetTxLPRELOC2_init data_va=0x100000700
attr_data {
Name = SetTxLPRELOC2_init,
hypervisor,
compressimage
}
.data
SetTxLPRELOC2_init:
.xword 0x0060452301000484
/************************************************************************/
SECTION SetTxLPValid_init data_va=0x100000800
attr_data {
Name = SetTxLPValid_init,
hypervisor,
compressimage
}
.data
SetTxLPValid_init:
.xword 0x0060452301000484
/************************************************************************/