Initial commit of OpenSPARC T2 design and verification files.
[OpenSPARC-T2-DV] / verif / diag / assembly / arch / prm / tso / tso_directed / tso_n1_prod_cons1_pio.s
/*
* ========== Copyright Header Begin ==========================================
*
* OpenSPARC T2 Processor File: tso_n1_prod_cons1_pio.s
* Copyright (C) 1995-2007 Sun Microsystems, Inc. All Rights Reserved
* 4150 Network Circle, Santa Clara, California 95054, U.S.A.
*
* DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
* For the avoidance of doubt, and except that if any non-GPL license
* choice is available it will apply instead, Sun elects to use only
* the General Public License version 2 (GPLv2) at this time for any
* software where a choice of GPL license versions is made
* available with the language indicating that GPLv2 or any later version
* may be used, or where a choice of which version of the GPL is applied is
* otherwise unspecified.
*
* Please contact Sun Microsystems, Inc., 4150 Network Circle, Santa Clara,
* CA 95054 USA or visit www.sun.com if you need additional information or
* have any questions.
*
*
* ========== Copyright Header End ============================================
*/
#define JBI_CONFIG
#define MAIN_PAGE_HV_ALSO
#define spinlock_addr_reg %o0
#define data_base_reg %o1
#define my_id_reg %o3
#define test_reg %o4
#define global_cnt_reg %o5
#define tmp1 %l1
#define ITERATIONS 0x2
#include "hboot.s"
.global main
main:
ta T_CHANGE_HPRIV
nop
setx spinlock_address, %l0, spinlock_addr_reg ! spinlock address
set ITERATIONS, global_cnt_reg !
th_fork(th_main,%l0)
! Some of the threads are producers, some are consumers
! A pair of producer and consumer has the same ID.
!=====================================================
th_main_0:
add %g0, 0x8, my_id_reg ! this is my ID address
ba producer
nop
th_main_1:
add %g0, 0x8, my_id_reg
ba consumer
nop
th_main_2:
add %g0, 0x38, my_id_reg
ba producer
nop
!ba good_end
!nop
th_main_3:
add %g0, 0x3c, my_id_reg
ba consumer
nop
!ba good_end
!nop
th_main_4:
add %g0, 0x38, my_id_reg
ba consumer
nop
!ba good_end
!nop
th_main_5:
add %g0, 0x3c, my_id_reg
ba producer
nop
!ba good_end
!nop
th_main_6:
ba good_end
nop
th_main_7:
ba good_end
nop
!====================================================================================
producer:
ld [spinlock_addr_reg + my_id_reg], test_reg ! try to acquire lock
tst test_reg ! did we get it?
be producer_gotlock
nop
ba producer
nop
!====================================================================================
consumer:
ld [spinlock_addr_reg + my_id_reg], test_reg ! try to acquire lock
sub test_reg, 0x55, %i1 ! code to end the test
tst %i1
be good_end ! end the test
nop
sub test_reg, 0x1, %i1 ! code for available data
tst %i1
be consumer_gotlock
nop
ba consumer
nop
!====================================================================================
producer_gotlock:
set 0x60, %l0
setx protected_area, tmp1, data_base_reg
producer_loop0:
st %g0, [data_base_reg + my_id_reg] ! clean up
add data_base_reg, 0x40, data_base_reg ! increment the address
deccc %l0
bne producer_loop0 ! repeat
nop
set 0x60, %l0
setx protected_area, tmp1, data_base_reg
mov my_id_reg, %i1
producer_loop1:
st %i1, [data_base_reg + my_id_reg] ! store my ID in there
add data_base_reg, 0x40, data_base_reg ! increment the address
add %i1, 1, %i1
deccc %l0
bne producer_loop1 ! repeat
nop
deccc global_cnt_reg
be cleanup_and_finish
nop
add %g0, 1 , tmp1
st tmp1, [spinlock_addr_reg + my_id_reg] ! data ready
ba producer
nop
cleanup_and_finish:
add %g0, 0x55 , tmp1
st tmp1, [spinlock_addr_reg + my_id_reg] ! finish the test
ba good_end
nop
!====================================================================================
consumer_gotlock:
set 0x60, %l0
setx protected_area, tmp1, data_base_reg
mov my_id_reg, %i1
consumer_loop1:
ld [data_base_reg + my_id_reg], %i2 ! load my ID in there
subcc %i2, %i1, %i2
bne bad_end
nop
add data_base_reg, 0x40, data_base_reg ! increment the address
inc %i1
deccc %l0
bne consumer_loop1 ! repeat
nop
st %g0, [spinlock_addr_reg+ my_id_reg] ! consumer ready
ba consumer
nop
good_end:
ta T_GOOD_TRAP
bad_end:
ta T_BAD_TRAP
!==========================
SECTION .MY_DATA0 DATA_VA=0xd0100000
attr_data {
Name = .MY_DATA0,
VA= 0x0d0100000,
RA=0xc000000000,
PA=0xc000000000,
part_0_ctx_nonzero_tsb_config_0,
TTE_G=1, TTE_Context=0x44, TTE_V=1, TTE_Size=0, TTE_NFO=0,
TTE_IE=0, TTE_Soft2=0, TTE_Diag=0, TTE_Soft=0,
TTE_L=0, TTE_CP=0, TTE_CV=0, TTE_E=0, TTE_P=0, TTE_W=1
}
.data
.global spinlock_address
spinlock_address:
.skip 0x1000
SECTION .MY_DATA1 DATA_VA=0xd1110000
attr_data {
Name = .MY_DATA1,
VA= 0x0d1110000,
RA=0xc200bee000,
PA=0xc200bee000,
part_0_ctx_nonzero_tsb_config_1,
TTE_G=1, TTE_Context=0x44, TTE_V=1, TTE_Size=0, TTE_NFO=0,
TTE_IE=0, TTE_Soft2=0, TTE_Diag=0, TTE_Soft=0,
TTE_L=0, TTE_CP=0, TTE_CV=0, TTE_E=0, TTE_P=0, TTE_W=1
}
.data
.global protected_area
protected_area:
.word 0xbeef
.skip 0x1000
.word 0xbeef
.end