* ========== Copyright Header Begin ==========================================
* OpenSPARC T2 Processor File: PCIeIORw_dtm.s
* Copyright (C) 1995-2007 Sun Microsystems, Inc. All Rights Reserved
* 4150 Network Circle, Santa Clara, California 95054, U.S.A.
* DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
* For the avoidance of doubt, and except that if any non-GPL license
* choice is available it will apply instead, Sun elects to use only
* the General Public License version 2 (GPLv2) at this time for any
* software where a choice of GPL license versions is made
* available with the language indicating that GPLv2 or any later version
* may be used, or where a choice of which version of the GPL is applied is
* Please contact Sun Microsystems, Inc., 4150 Network Circle, Santa Clara,
* CA 95054 USA or visit www.sun.com if you need additional information or
* ========== Copyright Header End ============================================
#define MAIN_PAGE_HV_ALSO
#define IO_RD_ADDR mpeval((N2_PCIE_BASE_ADDR + (IOCFG_OFFSET_BASE_REG_DATA & 0x7fffffffffffffff)) | IO_ACCESS_PA)
/************************************************************************
************************************************************************/
! select an IO address in PCI address range and transmit the command to NCU
setx IO_RD_ADDR, %g1, %g2
! store byte - all byte offsets within an octlet
! stb %o1, [%g2 + 2*8 + 1]
! stb %o2, [%g2 + 3*8 + 2]
! stb %o3, [%g2 + 4*8 + 3]
! stb %o4, [%g2 + 5*8 + 4]
! stb %o5, [%g2 + 6*8 + 5]
! stb %o6, [%g2 + 7*8 + 6]
! stb %o7, [%g2 + 8*8 + 7]
! store half-word - all half-word offsets within an octlet
! sth %o0, [%g2 + 8*9 + 0]
! sth %o1, [%g2 + 8*10 + 2]
! sth %o2, [%g2 + 8*11 + 4]
! sth %o3, [%g2 + 8*12 + 8]
! store word - all word offsets within an octlet
! stw %o4, [%g2 + 8*13 + 0]
! stw %o5, [%g2 + 8*14 + 4]
!!! use the loads to verify the stores
! load byte - all byte offsets within an octlet
ldub [%g2 + 13*8 + 0], %l0
! ldub [%g2 + 13*8 + 1], %l1
! ldub [%g2 + 13*8 + 2], %l2
! ldub [%g2 + 13*8 + 3], %l3
! ldub [%g2 + 14*8 + 4], %l4
! ldub [%g2 + 14*8 + 5], %l5
! ldub [%g2 + 14*8 + 6], %l6
! ldub [%g2 + 14*8 + 7], %l7
! load half-word - all half-word offsets within an octlet
lduh [%g2 + 1*8 + 0], %o0
! lduh [%g2 + 2*8 + 0], %o0
! lduh [%g2 + 3*8 + 2], %o1
! lduh [%g2 + 4*8 + 2], %o2
! lduh [%g2 + 5*8 + 4], %o3
! lduh [%g2 + 7*8 + 6], %o3
! Load word - all word offsets within an octlet
! lduw [%g2 + 13*8 + 0], %o4
! lduw [%g2 + 6*8 + 4], %o4
! lduw [%g2 + 8*8 + 4], %o5
/************************************************************************
************************************************************************/
SECTION .DATA DATA_VA=IO_RD_ADDR
.xword 0xdeadbeefdeadbeef
.xword 0x0101010101010101
.xword 0x0101010101010101
.xword 0x0101010101010101
.xword 0x0101010101010101
.xword 0x0202020202020202
.xword 0x0202020202020202
.xword 0x0202020202020202
.xword 0x0202020202020202
.xword 0x0303030303030303
.xword 0x0303030303030303
.xword 0x0303030303030303
.xword 0x0303030303030303
.xword 0x0404040404040404
.xword 0x0404040404040404
.xword 0x0404040404040404
.xword 0x0404040404040404
.xword 0xdeadbeefdeadbeef
/************************************************************************/