* ========== Copyright Header Begin ==========================================
* OpenSPARC T2 Processor File: isa3_pmu_e2_t1.s
* Copyright (C) 1995-2007 Sun Microsystems, Inc. All Rights Reserved
* 4150 Network Circle, Santa Clara, California 95054, U.S.A.
* DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
* For the avoidance of doubt, and except that if any non-GPL license
* choice is available it will apply instead, Sun elects to use only
* the General Public License version 2 (GPLv2) at this time for any
* software where a choice of GPL license versions is made
* available with the language indicating that GPLv2 or any later version
* may be used, or where a choice of which version of the GPL is applied is
* Please contact Sun Microsystems, Inc., 4150 Network Circle, Santa Clara,
* CA 95054 USA or visit www.sun.com if you need additional information or
* ========== Copyright Header End ============================================
#define MAIN_PAGE_NUCLEUS_ALSO
/************************************************************************
************************************************************************/
!# Initialize registers ..
set 0x10088042, %l0 ! count completed branches
set 0x10108082, %l1 ! count taken branches (mispredicted)
set 0x10208102, %l2 ! count floats
set 0x10408202, %l3 ! count loads
set 0x10808402, %l4 ! count stores
set 0x11008802, %l5 ! count sethi (software count instr)
set 0x12009002, %l6 ! count other instructions
ta T_CHANGE_PRIV ! Should cause Watchdog_reset trap
rd %pic, %g2 ! load the current pic value into %g2
wr %g0, %g0, %pic ! zero out the counter
! before sending branches, update the PCR to be in UT.?
rd %pcr, %g3 ! load the current pcr value into %g3
wr %l0, %g0, %pcr ! count branches
bne,pn %icc, fail ! no branching
brz %l0, fail ! no branching
rd %pic, %g2 ! load the current pic value into %g2
addcc %g0, 0x0002, %g5! keep track of counts
wr %l1, %g0, %pcr ! count taken branches
brz %g0, cnt_float ! branching
inc %g5 ! this does not get executed
wr %l2, %g0, %pcr ! count floats
rd %pic, %g2 ! load the current pic value into %g2
rd %pic, %g2 ! load the current pic value into %g2
rd %pic, %g2 ! load the current pic value into %g2
!testing... inserting other instructions
setx 0xDEADBEEF11111111, %g2, %g4
wr %l3, %g0, %pcr !count loads
wr %l4, %g0, %pcr !count stores
rd %pic, %g2 ! load the current pic value into %g2
rd %pic, %g2 ! load the current pic value into %g2
!ldd [%l7 + 0x28], %g6 !this fails the test in boot.s mode... ??? debug soon.
inc %g5 ! this one to take the wrasr into account... need to revisit
wr %l5, %g0, %pcr !count sethi
rd %pic, %g2 ! load the current pic value into %g2
! this sethi is not counted... not recognized by DEC
sethi %hi(0x0fc000), %g0 !software count inst
rd %pic, %g2 ! load the current pic value into %g2
wr %l6, %g0, %pcr !count other inst
wr %g0, %g0, %pcr !stop counting
rd %pic, %g2 !check pic value
EXIT_GOOD /* test finish */
/************************************************************************
************************************************************************/