Initial commit of OpenSPARC T2 design and verification files.
[OpenSPARC-T2-DV] / verif / diag / assembly / isa3 / isa3_trap_0x3f.s
/*
* ========== Copyright Header Begin ==========================================
*
* OpenSPARC T2 Processor File: isa3_trap_0x3f.s
* Copyright (C) 1995-2007 Sun Microsystems, Inc. All Rights Reserved
* 4150 Network Circle, Santa Clara, California 95054, U.S.A.
*
* DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
* For the avoidance of doubt, and except that if any non-GPL license
* choice is available it will apply instead, Sun elects to use only
* the General Public License version 2 (GPLv2) at this time for any
* software where a choice of GPL license versions is made
* available with the language indicating that GPLv2 or any later version
* may be used, or where a choice of which version of the GPL is applied is
* otherwise unspecified.
*
* Please contact Sun Microsystems, Inc., 4150 Network Circle, Santa Clara,
* CA 95054 USA or visit www.sun.com if you need additional information or
* have any questions.
*
*
* ========== Copyright Header End ============================================
*/
#define MY_USER_TEXT_VA 0xa0000
#define MY_USER_TEXT_RA 0x00000000400a0000
#define MY_USER_TEXT_PA 0x00000010400a0000
#define MY_USER_DATA_VA 0xb0000
#define MY_USER_DATA_RA 0x00000000400b0000
#define MY_USER_DATA_PA 0x00000010400b0000
#define MY_PRIV_TEXT_VA 0xc0000
#define MY_PRIV_TEXT_RA 0x00000000400d0000
#define MY_PRIV_TEXT_PA 0x00000010400d0000
#define MY_PRIV_DATA_VA 0xe0000
#define MY_PRIV_DATA_RA 0x00000000400f0000
#define MY_PRIV_DATA_PA 0x00000010400f0000
#define MY_HP_TEXT_PA 0x0000001050000000
!!! Custom trap handler
#define H_HT0_Data_Real_Tran_Miss_0x3f
#define My_HT0_Data_Real_Tran_Miss_0x3f \
setx My_HP_Code_Begin, %l1, %l3 ; \
jmp %l3 ; \
nop ;
#define MAIN_PAGE_HV_ALSO
#define MAIN_PAGE_NUCLEUS_ALSO
#include "hboot.s"
/************************************************************************
Test case code start
************************************************************************/
.text
.global main
.global test_point
main: /* test begin */
!!! We are assuming DM bit is set at this point!
ta T_CHANGE_HPRIV
! Can't do the read and xor to flip the DM bit because of a bug in Simics
! Hard-code the value for lsu_ctl_reg with DM=0
!ldxa [%g0] ASI_LSU_CTL_REG, %l1
!xor %l1, 8, %l1 ! clearing DM bit
setx 0x017, %l1, %l2
stxa %l2, [%g0] ASI_LSU_CTL_REG
setx user_data_begin, %l1, %l2
ta T_CHANGE_NONHPRIV
ta T_CHANGE_NONPRIV
test_point:
ldx [%l2], %l1
EXIT_BAD
nop
/************************************************************************
Test case data start
************************************************************************/
.data
user_data_start:
.word 0xD6B3479D
.word 0xDB28926C
SECTION .My_HP_Section TEXT_VA=MY_HP_TEXT_PA
attr_text {
Name = .My_HP_Section,
hypervisor
}
.text
.global My_HP_Code_Begin
My_HP_Code_Begin:
setx test_point, %l1, %l3
rdpr %tpc, %l2
cmp %l2, %l3
bne test_failed
nop
EXIT_GOOD
test_failed:
EXIT_BAD
SECTION .My_User_Section TEXT_VA=MY_USER_TEXT_VA
attr_text {
Name = .My_User_Section,
VA = MY_USER_TEXT_VA,
RA = MY_USER_TEXT_RA,
PA = MY_USER_TEXT_PA,
part_0_ctx_nonzero_tsb_config_0,
TTE_G=1, TTE_Context=0x44, TTE_V=1, TTE_Size=0, TTE_NFO=0,
TTE_IE=0, TTE_Soft2=0, TTE_Diag=0, TTE_Soft=0,
TTE_L=0, TTE_CP=1, TTE_CV=0, TTE_E=0, TTE_P=0, TTE_W=1
}
.text
.global user_code_begin
user_code_begin:
nop
nop
EXIT_GOOD
SECTION .My_User_Data_Section DATA_VA=MY_USER_DATA_VA
attr_data {
Name = .My_User_Data_Section,
VA = MY_USER_DATA_VA,
RA = MY_USER_DATA_RA,
PA = MY_USER_DATA_PA,
part_0_ctx_nonzero_tsb_config_0,
TTE_G=1, TTE_Context=0x44, TTE_V=1, TTE_Size=0, TTE_NFO=0,
TTE_IE=0, TTE_Soft2=0, TTE_Diag=0, TTE_Soft=0,
TTE_L=0, TTE_CP=1, TTE_CV=0, TTE_E=0, TTE_P=0, TTE_W=1
}
.text
.global user_data_begin
user_data_begin:
.xword 0101010101010101
.xword 0202020202020202
.xword 0303030303030303
.xword 0404040404040404
SECTION .My_Priv_Section TEXT_VA=MY_PRIV_TEXT_VA
attr_text {
Name = .My_Priv_Section,
VA = MY_PRIV_TEXT_VA,
RA = MY_PRIV_TEXT_RA,
PA = MY_PRIV_TEXT_PA,
part_0_ctx_nonzero_tsb_config_0,
TTE_G=1, TTE_Context=0x44, TTE_V=1, TTE_Size=0, TTE_NFO=0,
TTE_IE=0, TTE_Soft2=0, TTE_Diag=0, TTE_Soft=0,
TTE_L=0, TTE_CP=1, TTE_CV=0, TTE_E=0, TTE_P=1, TTE_W=1
}
.text
.global supervisor_code_begin
supervisor_code_begin:
nop ! should take a trap here
nop
EXIT_BAD
SECTION .My_Priv_Data_Section DATA_VA=MY_PRIV_DATA_VA
attr_data {
Name = .My_Priv_Data_Section,
VA = MY_PRIV_DATA_VA,
RA = MY_PRIV_DATA_RA,
PA = MY_PRIV_DATA_PA,
part_0_ctx_nonzero_tsb_config_0,
TTE_G=1, TTE_Context=0x44, TTE_V=1, TTE_Size=0, TTE_NFO=0,
TTE_IE=0, TTE_Soft2=0, TTE_Diag=0, TTE_Soft=0,
TTE_L=0, TTE_CP=1, TTE_CV=0, TTE_E=0, TTE_P=1, TTE_W=1
}
.data
.global supervisor_data_begin
supervisor_data_begin:
.xword 1212121212121212
.xword 1313131313131313
.xword 1414141414141414
.xword 1515151515151515
.end