projects / OpenSPARC-T2-DV / blob
? search:
summary | tags | clone url | shortlog | log | commit | commitdiff | tree
blame | history | raw | HEAD
Initial commit of OpenSPARC T2 design and verification files.
[OpenSPARC-T2-DV] / verif / diag / assembly / peu / PCIeFireDeadlockScn2.s
/*
* ========== Copyright Header Begin ==========================================
*
* OpenSPARC T2 Processor File: PCIeFireDeadlockScn2.s
* Copyright (C) 1995-2007 Sun Microsystems, Inc. All Rights Reserved
* 4150 Network Circle, Santa Clara, California 95054, U.S.A.
*
* DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
* For the avoidance of doubt, and except that if any non-GPL license
* choice is available it will apply instead, Sun elects to use only
* the General Public License version 2 (GPLv2) at this time for any
* software where a choice of GPL license versions is made
* available with the language indicating that GPLv2 or any later version
* may be used, or where a choice of which version of the GPL is applied is
* otherwise unspecified.
*
* Please contact Sun Microsystems, Inc., 4150 Network Circle, Santa Clara,
* CA 95054 USA or visit www.sun.com if you need additional information or
* have any questions.
*
*
* ========== Copyright Header End ============================================
*/
#define ENABLE_PCIE_LINK_TRAINING
#define ENABLE_PCIE_MPS_256
#define MAIN_PAGE_HV_ALSO
! this will make the boot code load a new NPH credit value before link training
#define PEU_NPH_CREDIT 0x4
#define H_HT0_Interrupt_0x60
#define My_HT0_Interrupt_0x60 \
call my_trap_code; \
nop; \
retry; \
nop;
#include "hboot.s"
#include "peu_defines.h"
#include "ncu_defines.h"
#include "cmp_macros.h"
#define MEM32_RD_ADDR mpeval(N2_PCIE_BASE_ADDR + MEM32_OFFSET_BASE_REG_DATA)
#define MEM32_WR_ADDR mpeval(N2_PCIE_BASE_ADDR + MEM32_OFFSET_BASE_REG_DATA)
#define CFG1_WR_ADDR mpeval((N2_PCIE_BASE_ADDR + IOCFG_OFFSET_BASE_REG_DATA) | CFG1_ACCESS_PA)
#define DMA_DATA_ADDR 0x00800000
#define IOMMU_TTE_ADDR 0x40000000
! Bit 8 = Page Size: 0=8KB, 1=64KB; Bits 3:0 = TSB Table size: 6=64k entries
#define MMU_TSB_CNTRL_REG_DATA mpeval(IOMMU_TTE_ADDR | 0x100 | 6)
#define NCU_IOMMU_INVALIDATE_REG_ADDR 0x8000002030
/************************************************************************
Test case code start
************************************************************************/
SECTION .MAIN
.text
.global main
main:
ta T_CHANGE_HPRIV
nop
th_fork(th_main, %l0)
/*************************************************************************
Thread 0 will
*************************************************************************/
th_main_0:
! enable interrupts & provide basic handler
#include "piu_rupt_enable.s"
! enable SUN4U translation in the IOMMU
setx FIRE_DLC_MMU_CSR_A_CTL_ADDR, %g1, %g2
setx 0x00301, %g1, %g3 ! 9:8 11 = Cache enabled, 0: 1 = translation enabled
stx %g3, [%g2]
ldx [%g2], %g3
! load address of the TSB table, and the page size (64KB)
setx FIRE_DLC_MMU_CSR_A_TSB_ADDR, %g1, %g2
setx MMU_TSB_CNTRL_REG_DATA, %g1, %g3
stx %g3, [%g2]
ldx [%g2], %g3
StallCpl: nop
! $EV trig_pc_d(1,@VA(.MAIN.StallCpl)) -> EnablePCIeIgCmd("STALL_CPL", 0, 0, "64'h40",1)
! set the Traffic Class for all the DMA R&W TLPs to 3, so denali doesn't
! send them out of order
settc: nop ! $EV trig_pc_d(1, @VA(.MAIN.settc)) -> EnablePCIeIgCmd ("SET_TC", 3, 0, 0, 1 )
SYNC_THREAD_MAIN( test_failed, %g1, %g2, %g3 )
!!! wait for threads 6 & 7 to issue enough PIO WRITES
setx FIRE_PLC_TLU_CTB_TLR_CSR_A_TLU_ECC_ADDR, %g1, %g7
mov 100, %g2
delay_loop1:
ldx [%g7], %l7 ! get Egress Credits Consumed
ldx [%g7+0x20], %o7 ! get Ingress Credits Received
dec %g2
cmp %g2, 0
bne delay_loop1
nop
nop
nop
!!! 4. DMA Memory Read Requests E (4k byte total)
#define DMARD_ADDR_1 mpeval(0x00800000,16,16)
DMARD1: nop; nop;nop; nop;nop; nop;
! $EV trig_pc_d(1,@VA(.MAIN.DMARD1)) -> EnablePCIeIgCmd("DMARD", DMARD_ADDR_1, DMARD_ADDR_1, "64'h1000",1)
!!! 5. DMA Memory Read Request F (any size)
#define DMARD_ADDR_2 mpeval(0x00801000,16,16)
DMARD2: nop; nop;nop; nop;nop; nop;
! $EV trig_pc_d(1,@VA(.MAIN.DMARD2)) -> EnablePCIeIgCmd("DMARD", DMARD_ADDR_2, DMARD_ADDR_2, "64'h1000",1)
mov 50, %g2
delay_loop2:
ldx [%g7], %l7 ! get Egress Credits Consumed
ldx [%g7+0x20], %o7 ! get Ingress Credits Received
dec %g2
cmp %g2, 0
bne delay_loop2
nop
nop
nop
!!! 6. 61 DMA Memory Write Requests G (each 64 bytes)
!!! 7. DMA Memory Write Request H (any size)
#define DMA_ADDR_1 mpeval(0x00800000,16,16)
#define DMA_ADDR_2 mpeval(0x00900000,16,16)
dmawr: nop
! $EV trig_pc_d(1,@VA(.MAIN.dmawr)) -> EnablePCIeIgCmd("DMAWR", DMA_ADDR_1, DMA_ADDR_2, "64'h40", 3e, *, * )
mov 10, %g2
dmawr_loop:
ldx [%g7], %l7 ! get Egress Credits Consumed
ldx [%g7+0x20], %o7 ! get Ingress Credits Received
dec %g2
cmp %g2, 0
bne dmawr_loop
nop
nop
nop
!!! 8. CplD for Memory Read A/B/C/D/E
UnstallCpl: nop
! $EV trig_pc_d(1,@VA(.MAIN.UnstallCpl)) -> EnablePCIeIgCmd("UNSTALL_CPL", 0, 0, "64'h40",1)
!!! wait for the completions
mov 100, %g2
delay_loop3:
ldx [%g7], %l7 ! get Egress Credits Consumed
ldx [%g7+0x20], %o7 ! get Ingress Credits Received
dec %g2
cmp %g2, 0
bne delay_loop3
nop
nop
nop
!!! Wait for the INTA following a 0 length DMA Read to make sure all is okay
INTA:
! $EV trig_pc_d(1,@VA(.MAIN.INTA)) -> EnablePCIeIgCmd("DMARD_INTA", DMA_ADDR_2, DMA_ADDR_2, "64'h0",1)
setx FIRE_DLC_IMU_RDS_INTX_CSR_A_INTX_STATUS_REG_ADDR, %g1, %g2
mov 100, %g3 ! loop count
mov 8, %g4 ! INTA asserted bit
inta_wait:
ldx [%g2], %g5
cmp %g4,%g5
be got_inta
dec %g3
cmp %g3, 0
bne inta_wait
nop
test_failed0:
! $EV trig_pc_d(1, @VA(.MAIN.test_failed0)) -> printf("\n ERROR: timeout while waiting for INTA\n")
EXIT_BAD
nop
got_inta:
!!! write to "thread done" location
setx thread_done, %g1, %g2
mov 0xff, %g3
stb %g3, [%g2 + %o1]
!!! check that all threads wrote to "thread done" location
setx 0xffffffffffffffff, %g1, %g3
ldx [%g2], %g4
cmp %g3, %g4
be test_passed0
nop
test_failed1:
! $EV trig_pc_d(1, @VA(.MAIN.test_failed1)) -> printf("\n ERROR: not all threads are complete\n")
EXIT_BAD
nop
test_passed0:
EXIT_GOOD
nop
/*************************************************************************
Threads 1 - 5 will issue th 5 PIO Memory Read requests, that will stall
*************************************************************************/
th_main_1:
th_main_2:
th_main_3:
th_main_4:
th_main_5:
SYNC_THREAD_OTHER( %o1,%g1,%g2 )
!!! 1. Do five Memory Read requests A
setx MEM32_RD_ADDR, %g1, %g2
sllx %o1, 4, %l1
or %l1, %g2, %g2
ldx [%g2], %g3 ! this PIO read will stall the
! thread until the read returns
!!! write to "thread done" location
setx thread_done, %g1, %g2
mov 0xff, %g3
stb %g3, [%g2 + %o1]
ba test_passed
nop
/*************************************************************************
Threads 6 - 7 will issue the 35 PIO Memory Write requests. These might
stall if one of the pio modes (fixes) is enabled.
*************************************************************************/
th_main_6:
th_main_7:
SYNC_THREAD_OTHER( %o1,%g1,%g2 )
!!! 2. the 35 Memory write requests C0-C34
setx MEM32_WR_ADDR, %g1, %g2
sllx %o1, 16, %l1
or %l1, %g2, %g2
setx 0x2121212121212121, %g1, %g3
stx %g3, [%g2]
setx 0x2222222222222222, %g1, %g3
stx %g3, [%g2+8]
setx 0x2323232323232323, %g1, %g3
stx %g3, [%g2+16]
setx 0x2424242424242424, %g1, %g3
stx %g3, [%g2+24]
setx 0x2525252525252525, %g1, %g3
stx %g3, [%g2+32]
setx 0x2626262626262626, %g1, %g3
stx %g3, [%g2+40]
setx 0x2727272727272727, %g1, %g3
stx %g3, [%g2+48]
setx 0x2828282828282828, %g1, %g3
stx %g3, [%g2+56]
setx 0x2929292929292929, %g1, %g3
stx %g3, [%g2+64]
setx 0x2a2a2a2a2a2a2a2a, %g1, %g3
stx %g3, [%g2+72]
setx 0x2b2b2b2b2b2b2b2b, %g1, %g3
stx %g3, [%g2+40]
setx 0x2c2c2c2c2c2c2c2c, %g1, %g3
stx %g3, [%g2+48]
setx 0x2d2d2d2d2d2d2d2d, %g1, %g3
stx %g3, [%g2+56]
setx 0x2e2e2e2e2e2e2e2e, %g1, %g3
stx %g3, [%g2+64]
setx 0x2f2f2f2f2f2f2f2f, %g1, %g3
stx %g3, [%g2+72]
setx 0x3131313131313131, %g1, %g3
stx %g3, [%g2+80]
setx 0x3232323232323232, %g1, %g3
stx %g3, [%g2+88]
setx 0x3333333333333333, %g1, %g3
stx %g3, [%g2+96]
setx 0x3434343434343434, %g1, %g3
stx %g3, [%g2+104]
!!! write to "thread done" location
setx thread_done, %g1, %g2
mov 0xff, %g3
stb %g3, [%g2 + %o1]
test_passed:
EXIT_GOOD
test_failed:
EXIT_BAD
/************************************************************************
Test case data start
***********************************************************************/
.align 64
thread_done:
.byte 0x0 ! done thread 0
.byte 0x0 ! done thread 1
.byte 0x0 ! done thread 2
.byte 0x0 ! done thread 3
.byte 0x0 ! done thread 4
.byte 0x0 ! done thread 5
.byte 0x0 ! done thread 6
.byte 0x0 ! done thread 7
SECTION .DATA DATA_VA=MEM32_RD_ADDR
attr_data {
Name = .DATA,
hypervisor,
compressimage
}
.data
data0: .xword 0x1011121314151617
.xword 0x18191a1b1c1d1e1f
data1: .xword 0x2021222324252627
.xword 0x28292a2b2c2d2e2f
data2: .xword 0x3031323334353637
.xword 0x38393a3b3c3d3e3f
data3: .xword 0x4041424344454647
.xword 0x48494a4b4c4d4e4f
data4: .xword 0x5051525354555657
.xword 0x58595a5b5c5d5e5f
/************************************************************************
Test case DMA data start.
************************************************************************/
SECTION .DMADATA DATA_VA=DMA_DATA_ADDR
attr_data {
Name = .DMADATA,
hypervisor,
compressimage
}
.data
init_mem(0x0101010201030104, 1024, 8, +, 0, +, 0x0004000400040004)
/************************************************************************
IOMMU TTE start
TTE Format:
63: 48 DEV KEY - set to 0
47: 39 reserved - set to 0
38: 13 DATA PA - set to VA for VA=RA
12: 7 DATA_SOFT - set to 0
6: 5 reserved - set to 0
5: 3 FNM MASK - set to 0
2: 2 KEY VALID - set to 0
1: 1 DATA_W - set to 1
0: 0 DATA_V - set to 1
************************************************************************/
SECTION .DATA2 DATA_VA=IOMMU_TTE_ADDR
attr_data {
Name = .DATA2,
hypervisor,
compressimage
}
.data
.skip 8*0x80
iommu_tte_addr:
init_mem(0x0000000000800003, 32, 8, +, 0, +, 0x0000000000010000)
/************************************************************************/
Full OpenSPARC design & verification tarball including full HDL.