verif/diag/diaglists/memop/memop.diaglist

// ========== Copyright Header Begin ==========================================
//
// OpenSPARC T2 Processor File: memop.diaglist
// Copyright (C) 1995-2007 Sun Microsystems, Inc. All Rights Reserved
// 4150 Network Circle, Santa Clara, California 95054, U.S.A.
//
// * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
//
// This program is free software; you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation; version 2 of the License.
//
// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
// GNU General Public License for more details.
//
// You should have received a copy of the GNU General Public License
// along with this program; if not, write to the Free Software
// Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
//
// For the avoidance of doubt, and except that if any non-GPL license
// choice is available it will apply instead, Sun elects to use only
// the General Public License version 2 (GPLv2) at this time for any
// software where a choice of GPL license versions is made
// available with the language indicating that GPLv2 or any later version
// may be used, or where a choice of which version of the GPL is applied is
// otherwise unspecified.
//
// Please contact Sun Microsystems, Inc., 4150 Network Circle, Santa Clara,
// CA 95054 USA or visit www.sun.com if you need additional information or
// have any questions.
//
// ========== Copyright Header End ============================================
<sys(memop_all) name=sys(memop_all)>
<sys(all)>
<sys(daily)>

////////////////////////
// Single thread diags
///////////////////////

<runargs -midas_args=-DCMP_THREAD_START=0x1 -finish_mask=1>
<runargs -sas>

memop_all_atomics       memop_all_atomics.s

memop_all_mcu           memop_all_mcu.s

memop_all_stores        memop_all_stores.s

memop_byte_mask         memop_byte_mask.s

memop_ccx_packets       memop_ccx_packets.s

memop_halfword_byte_mask        memop_halfword_byte_mask.s

memop_l2_disable        memop_l2_disable.s

memop_word_byte_mask    memop_word_byte_mask.s

memop_all_loads         memop_all_loads.s       -vcs_run_args=+l2warm=1

</runargs>

<runargs -nosas>

#ifndef CCM

// Must '-nosas' until Riesling support MCU CSR's

memop_mcu_regs_ro       memop_mcu_regs_ro.s

memop_mcu_regs_rw       memop_mcu_regs_rw.s

memop_mcu_regs_other    memop_mcu_regs_other.s -vcs_run_args=+mcu_errmon_disable

#endif

// Must use '-nosas' since follow me support is not there for SPU interrupts

// memop_all_packet     memop_all_packet.s -midas_args=-allow_tsb_conflicts

memop_all_l2_banks      memop_all_l2_banks.s

memop_all_mcu_banks     memop_all_mcu_banks.s

memop_l2_vuad_access    memop_l2_vuad_access.s

memop_walk_one_addr     memop_walk_one_addr.s

memop_l2_control_reg    memop_l2_control_reg.s

</runargs>

memop_mem_out_of_range  memop_mem_out_of_range.s -vcs_run_args=+l2esr_mon_off -vcs_run_args=+8_FBDIMMS

memop_l2_size           memop_l2_size.s -midas_args=-allow_tsb_conflicts

memop_all_byte_mask     memop_all_byte_mask.s

memop_l2_err_en_reg     memop_l2_err_en_reg.s

memop_l2_err_address_reg        memop_l2_err_address_reg.s

memop_l2_err_status_reg memop_l2_err_status_reg.s

memop_l2_err_inject_reg memop_l2_err_inject_reg.s

memop_l2_notdata_err_addr_reg   memop_l2_notdata_err_addr_reg.s

</runargs>

/////////////////////////
// Multiple thread diags
////////////////////////

<runargs -sas>

memop_mt_l2_dep_store   memop_mt_l2_dep_store.s -nosas -midas_args=-DCMP_THREAD_START=0xff -finish_mask=ff

memop_mt_l2_miss_buff   memop_mt_l2_miss_buff.s -midas_args=-DCMP_THREAD_START=0xff -finish_mask=ff

memop_random_noatomic_multithrd memop_random_noatomic_multithrd.s -vcs_run_args=+TB_RANDOM_XIR  -midas_args=-DPART_0_BASE=0x200000000 -midas_args=-DL2_REG_PROG -nofast_boot -vcs_run_args=+ios_0in_ras_chk_off

#if (! defined FC)

memop_mt_fpu_ld_st      memop_mt_fpu_ld_st.s -midas_args=-DCMP_THREAD_START=0x01010101010101 -nosas -finish_mask=01010101010101

#endif

#if (! defined CCM)

memop_mt2_invalidate_l1 memop_mt2_invalidate_l1.s -midas_args=-DCMP_THREAD_START=0x3 -nosas -midas_args=-allow_tsb_conflicts -finish_mask=3 -midas_args=-DSYNC_THREADS

#endif

</runargs>

////////////////////////

///////////////////////

<runargs -vcs_run_args=+0in_no_checksim_db -vcs_run_args=+0in_no_statistics >

n2_8tload_weight_486046  n2_8tload_weight_486046.s -nosas -midas_args=-DCMP_THREAD_START=0xff -midas_args=-allow_tsb_conflicts -max_cycle=+3000000 -drm_freeram=4000 -drm_freeswap=2000 -tg_seed=1600189735 -finish_mask=ff

</runargs>

</sys(daily)>
</sys(all)>


////////////////////////
//  Long (over 20 hrs) memop diags
////////////////////////

<runargs -sas -midas_args=-DCMP_THREAD_START=0x1 -finish_mask=1>

memop_l2_data_access    memop_l2_data_access.s -nosas

memop_l2_tag_access     memop_l2_tag_access.s -nosas

</runargs>

</sys(memop_all)>