Initial commit of OpenSPARC T2 architecture model.
[OpenSPARC-T2-SAM] / obp / tools / promif / sun4u / prom_mem.c
/*
* ========== Copyright Header Begin ==========================================
*
* Hypervisor Software File: prom_mem.c
*
* Copyright (c) 2006 Sun Microsystems, Inc. All Rights Reserved.
*
* - Do no alter or remove copyright notices
*
* - Redistribution and use of this software in source and binary forms, with
* or without modification, are permitted provided that the following
* conditions are met:
*
* - Redistribution of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
*
* - Redistribution in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* Neither the name of Sun Microsystems, Inc. or the names of contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* This software is provided "AS IS," without a warranty of any kind.
* ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND WARRANTIES,
* INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A
* PARTICULAR PURPOSE OR NON-INFRINGEMENT, ARE HEREBY EXCLUDED. SUN
* MICROSYSTEMS, INC. ("SUN") AND ITS LICENSORS SHALL NOT BE LIABLE FOR
* ANY DAMAGES SUFFERED BY LICENSEE AS A RESULT OF USING, MODIFYING OR
* DISTRIBUTING THIS SOFTWARE OR ITS DERIVATIVES. IN NO EVENT WILL SUN
* OR ITS LICENSORS BE LIABLE FOR ANY LOST REVENUE, PROFIT OR DATA, OR
* FOR DIRECT, INDIRECT, SPECIAL, CONSEQUENTIAL, INCIDENTAL OR PUNITIVE
* DAMAGES, HOWEVER CAUSED AND REGARDLESS OF THE THEORY OF LIABILITY,
* ARISING OUT OF THE USE OF OR INABILITY TO USE THIS SOFTWARE, EVEN IF
* SUN HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
*
* You acknowledge that this software is not designed, licensed or
* intended for use in the design, construction, operation or maintenance of
* any nuclear facility.
*
* ========== Copyright Header End ============================================
*/
/*
* Copyright (c) 2000-2003 Sun Microsystems, Inc.
* All rights reserved.
* Use is subject to license terms.
*/
#pragma ident "@(#)prom_mem.c 1.1 00/08/07 SMI"
/*
* This file contains platform-dependent memory support routines,
* suitable for memory methods with 2-cell physical addresses.
* Use of these routines makes the caller platform-dependent,
* since the caller assumes knowledge of the physical layout of
* the machines address space. Generic programs should use the
* standard client interface memory allocators.
*/
#include <sys/promif.h>
#include <sys/promimpl.h>
ihandle_t
prom_memory_ihandle(void)
{
static ihandle_t imemory;
if (imemory != (ihandle_t)0)
return (imemory);
if (prom_getproplen(prom_chosennode(), "memory") != sizeof (ihandle_t))
return (imemory = (ihandle_t)-1);
(void) prom_getprop(prom_chosennode(), "memory", (caddr_t)(&imemory));
imemory = (ihandle_t)prom_decode_int(imemory);
return (imemory);
}
/*
* Allocate physical memory, unmapped and possibly aligned.
* Returns 0: Success; Non-zero: failure.
* Returns *physaddr only if successful.
*
* This routine is suitable for platforms with 2-cell physical addresses
* and a single size cell in the "memory" node.
*/
int
prom_allocate_phys(size_t size, uint32_t align, u_longlong_t *physaddr)
{
cell_t ci[10];
int32_t rv;
ihandle_t imemory = prom_memory_ihandle();
if ((imemory == (ihandle_t)-1))
return (-1);
if (align == 0)
align = (uint32_t)1;
ci[0] = p1275_ptr2cell("call-method"); /* Service name */
ci[1] = (cell_t)4; /* #argument cells */
ci[2] = (cell_t)3; /* #result cells */
ci[3] = p1275_ptr2cell("claim"); /* Arg1: Method name */
ci[4] = p1275_ihandle2cell(imemory); /* Arg2: memory ihandle */
ci[5] = p1275_uint2cell(align); /* Arg3: SA1: align */
ci[6] = p1275_size2cell(size); /* Arg4: SA2: size */
rv = p1275_cif_handler(&ci);
if (rv != 0)
return (rv);
if (p1275_cell2int(ci[7]) != 0) /* Res1: Catch result */
return (-1);
*physaddr = p1275_cells2ull(ci[8], ci[9]);
/* Res2: SR1: phys.hi ... Res3: SR2: phys.lo */
return (0);
}
/*
* Claim a region of physical memory, unmapped.
* Returns 0: Success; Non-zero: failure.
*
* This routine is suitable for platforms with 2-cell physical addresses
* and a single size cell in the "memory" node.
*/
int
prom_claim_phys(size_t size, u_longlong_t physaddr)
{
cell_t ci[10];
int32_t rv;
ihandle_t imemory = prom_memory_ihandle();
if ((imemory == (ihandle_t)-1))
return (-1);
ci[0] = p1275_ptr2cell("call-method"); /* Service name */
ci[1] = (cell_t)6; /* #argument cells */
ci[2] = (cell_t)1; /* #result cells */
ci[3] = p1275_ptr2cell("claim"); /* Arg1: Method name */
ci[4] = p1275_ihandle2cell(imemory); /* Arg2: mmu ihandle */
ci[5] = 0; /* Arg3: SA1: align */
ci[6] = p1275_size2cell(size); /* Arg4: SA2: len */
ci[7] = p1275_ull2cell_high(physaddr); /* Arg5: SA3: phys.hi */
ci[8] = p1275_ull2cell_low(physaddr); /* Arg6: SA4: phys.lo */
rv = p1275_cif_handler(&ci);
if (rv != 0)
return (rv);
if (p1275_cell2int(ci[9]) != 0) /* Res1: Catch result */
return (-1);
return (0);
}
/*
* Free physical memory (no unmapping is done).
* This routine is suitable for platforms with 2-cell physical addresses
* with a single size cell.
*/
void
prom_free_phys(size_t size, u_longlong_t physaddr)
{
cell_t ci[8];
ihandle_t imemory = prom_memory_ihandle();
if ((imemory == (ihandle_t)-1))
return;
ci[0] = p1275_ptr2cell("call-method"); /* Service name */
ci[1] = (cell_t)5; /* #argument cells */
ci[2] = (cell_t)0; /* #return cells */
ci[3] = p1275_ptr2cell("release"); /* Arg1: Method name */
ci[4] = p1275_ihandle2cell(imemory); /* Arg2: memory ihandle */
ci[5] = p1275_size2cell(size); /* Arg3: SA1: size */
ci[6] = p1275_ull2cell_high(physaddr); /* Arg4: SA2: phys.hi */
ci[7] = p1275_ull2cell_low(physaddr); /* Arg5: SA3: phys.lo */
(void) p1275_cif_handler(&ci);
}