--- /dev/null
+# Overview #
+
+This is the most recent and complete copy of the Field Guide that I could find
+as of 2018. I don't think there is an official maintainer of the list anymore
+since all the links are dead and no one responds from any of the listed email
+addresses.
+
+If you find any errors or omissions in the list, or discover a more recent
+copy, please [contact me](/contact) and I will update this copy.
+
+# Field Guide #
+
+ -*-Text-*-
+
+ F I E L D G U I D E
+
+ to
+
+ Qbus and Unibus Modules
+ Revised May 13 2009
+ Revised: July 27, 2002
+
+ ---------------------------------------------------------------------
+ Maintained by Megan Gentry
+ <mbg@world.std.com> <gentry@zk3.dec.com>
+
+ with recent comments/corrections from:
+ Chris Doran <chrisj.doran@physics.org>
+ and
+ Tim Shoppa <shoppa@trailing-edge.com>
+ and
+ Stephane Tsacas <stephane.tsacas+pdp11@gmail.com>
+
+ Originally Compiled and Maintained by Ronald Copley
+ <rcopley@huntingt.gannett.com>
+ ---------------------------------------------------------------------
+
+ Introduction
+
+ This list is an attempt to coalesce all net knowledge on PDP-11
+ UNIBUS and Qbus modules. It is designed to supercede all the
+ various homespun lists floating around -- giving one solid source
+ of information.
+
+ An expansion is in progress. In addition to PDP-11 UNIBUS and
+ Qbus, the list will now cover other forms of the PDP-11 such as
+ the Professional Series (CTI-Bus). Further, it will cover not
+ only PDP-11s, but VAXen and MIPS systems as well (VAXen being
+ available in both UNIBUS and Qbus forms, and MIPS machines in
+ Qbus). The list will also begin to include chassis, mounting
+ boxes, power supplies and backplanes.
+
+ For some non-Digital (third-party) disk and tape controllers, a
+ list of reputedly compatible drives may be shown. This list is
+ not exhaustive, and other similar disk and tape interfaces may
+ also work.
+
+ This list may be found on the following sites:
+
+ 1) http://world.std.com/~mbg/pdp11-field-guide.txt
+
+ As of 02-Feb-2000, when I accepted the offer from the former
+ maintainer to take over the file, this copy has become the
+ official, most up-to-date copy. One thing people may note is
+ that I have renamed it. This is because there is a similar
+ file in the works elsewhere to cover pdp8 modules and options.
+
+ Comments and suggestions about the format and content of the
+ file will be welcome at all times.
+
+ Please note that it may take some time for the *new* official
+ file to make it to the mirrors mentioned below.
+
+ 2) On metalab.unc.edu, in the following location:
+ /pub/academic/computer-science/history/pdp-11/hardware/field-guide.txt
+
+ Tim maintains quite a large archive of other information, it
+ is most definitely worth checking out -- Thanks, Tim!
+
+ 3) On ftp.village.org, in /pub/pdp-11/field-guide.txt
+
+ Dworkin keeps a compressed version here, too.
+
+ 4) On ftp.update.uu.se in /pub/pdp11/doc/field-guide.txt
+
+ Johnny's site has quite a plethora of PDP-11 stuff, along with
+ files/software pertaining to Pros and DECmates.
+
+
+ This file will be posted on an irregular basis to the PDP-11 related
+ newsgroups (vmsnet.pdp-11, alt.sys.pdp11).
+
+ In order to ensure that this file is as comprehensive and accurate
+ as possible, please don't hesitate to:
+
+ 1) Send any additions or corrections you may have to the
+ file maintainer (currently mbg@world.std.com).
+
+ 2) Feel free to edit a private copy of the file to include
+ your additions or corrections and send it (or a differences
+ file) to the file maintainer.
+
+ Please be prepared to cite the source of any such information. This
+ is to ensure that the file contains only validated information.
+
+ Just make sure you send anything you have to me. If you have
+ relevant hardcopy and you don't feel like typing it in, get in
+ contact with me and we'll work something out.
+
+ - - - - -
+
+ We owe a great amount of thanks to Tim Shoppa, Johnny Billquist,
+ Dworkin Muller and all others who maintain PDP-11 ftp sites. Also,
+ a great deal of respect is to be accorded to *anyone* attempting to
+ hook a PDP-11 to the net, or running one currently connected, for
+ that matter. The same for anyone, anywhere who *doesn't* put a
+ PDP-11 into the dumpster. Or the smelter. Etc. If you don't know
+ what to do with it, please contact me via email and we'll get the
+ information out to people who would be interested in saving it.
+
+ We owe final credit and gratitude to Ronald Copley, who developed
+ and maintained this list for numerous years. Thanks *alot*!
+
+
+ Credits List (alphabetical order):
+
+ Joe Allen (author of the amazing JOE!)
+ Randy Betke (Qbus clarifications)
+ Johnny Billquist (11/70 goodies, maintains ftp.update.uu.se ftp site)
+ Ronald Copley (Originally compiled and maintained this document)
+ Eric Dittman (Emulex modules, uVAXen modules)
+ Chris Doran (Corrections, additions)
+ Tony Duell (corrections)
+ Jonathan Elson (Dilog modules list)
+ Megan Gentry (New information, new format, new maintainer)
+ Henk Gooijen (additions)
+ Tom Guptill (maintains lenin.cc.rochester.edu "orphan" computer site)
+ Hans Hamakers (corrections, additions)
+ Lee Havemann (thanks, Lee!!)
+ Bob Hoffman (cleared up Dilog issue)
+ Doug Jones (help in general)
+ Ken Kirkby (video modules, staggering amount of other info)
+ Brian Knittel (additions)
+ Nick Laflamme (loaned a couple of DEC catalogues)
+ Dworkin Muller (maintains ftp.village.org ftp site)
+ Garry Page (LPS11 modules, others)
+ Tim Shoppa (general help, maintains sunsite.unc.edu ftp site)
+ Eric Smith (additions)
+ Alan Sieving (big list, advice, et alia)
+ Emanual Stiebler (corrections, additions)
+ Karl Sipfle (corrections)
+ Pete Turnbull (Qbus modules, mucho PDP wisdom)
+ Mike Umbricht (11/44 goodies, additions)
+ Ken Wellsch (11/20 specifications)
+ Dave Woodman (additions)
+ Mike Yankus (11/84 additions & more)
+ Rudy Zijlstra (UNIBUS module clarifications/additions)
+
+
+ Notes:
+
+ o 'Refs:' indicates documention in which information for the
+ option may be found.
+
+ o In the BUS column, Q is Qbus, U is UNIBUS, CTI is CTI bus
+ (Professional 300 series). With Vax and MIPS boards being
+ added, there may be some new bus designations such as BI
+ and XMI added here.
+
+ o EK-xxxxx-yy numbers are documents, with yy = UG for
+ user guide, TM for technical manual, IN for installation
+ manual, RC for reference card, OP for operator's manual,
+ PS for pocket service guide, CG for configuration Guide.
+ (These are only a few examples, not a definitive list).
+ The 'xxxxx' is often, but not always, the option name.
+
+ o MP-xxxxx numbers are maintenance printsets
+
+ o ZFxxx-RZ and ZJxxx-RZ numbers are Diagnostic Documentation
+ Kits.
+
+ o The Micronotes (uNotes) are single-topic articles, written
+ by various people within Digital to clarify information for
+ other Digital employees. There are two sets of them, with
+ similar numbers. If a uNOTE is cited here, it should be
+ listed as either uNOTE O# to signify the original set of
+ 115, or uNOTE N# to signify the newer set of 44. Some of
+ the older uNotes were recycled and given new numbers. Check
+ out metalab.unc.edu for copies of the new Micronotes, which
+ can be found under:
+
+ /pub/academic/computer-science/history/pdp-11/hardware/micronotes
+
+ o For Qbus boards, unless specified as having an S-Box handle
+ or being a MINC module or for a BA200 series enclosure, boards
+ should be able to be used in any Qbus backplane. (In fact,
+ most boards without S-Box handles should still be usable in
+ a BA200 series enclosure)
+
+ o Please note that some Qbus modules may only be inserted into
+ Q/Q backplanes, some may only be inserted into Q/CD backplanes,
+ and some are jumper selectable for Q/Q or Q/CD. Also, some
+ modules support 16-bit only, some support 18-bit and some
+ support full 22-bit.
+
+ o The latest version of the file has been modified such that
+ for a given module, all lines containing text pertaining
+ to that module have the module number at the beginning of
+ the line. This is to make it easy to grep (UNIX) for a
+ module number and have all information returned instead
+ of just the first line.
+
+
+
+ M O D U L E L I S T
+
+ ------------------------------------------------------------------------------
+ MODULE OPTION BUS DESCRIPTION
+ ------ -------- --- --------------------------------------------------
+ 000034 MCS11-CK CTI Bus option RAM (256Kbytes)
+ 000034 PN: 50-15487
+ 000034 Refs: EK-PC100-V1
+
+ 000041 DTC11-A CTI Telephone Management System (TMS)
+ 000041 Refs: EK-PC100-V2, MP-01654, Intel (8031, 8051, 8251A)
+ 000041 Refs: Intel (8255A)
+
+ 000042 DECNA CTI Ethernet Controller
+ 000042 PN: 50-15986 (50-15987 for DECNA-K, per O/M list)
+ 000042 Refs: EK-PC100-V2, MP-01895, Intel (82586)
+
+ 000043 PC3XS-AA CTI Z80/CPM option
+ 000043 PN: 50-15640
+ 000043 Refs: EK-PC100-V2
+
+ 000046 PC3XX-AA CTI Realtime Interface
+ 000046 PN: 50-15538
+ 000046 Refs: EB-25824-18
+
+ 000051 DRC11-AA CTI Parallel Interface
+
+ 000052 DLC11-AA CTI Serial Interface
+
+ 000053 ARC11-AA CTI Analogue Interface
+
+ 000064 -------- CTI Quad serial line option
+
+ 000401 -------- CTI 5.25" Winchester disk controller
+ 000401 PN: 54-15134
+ 000401 Refs: EK-PC100-V2
+
+ 001002 -------- CTI Professional 350 Bus video bit map controller
+ 001002 PN: 50-15137
+ 001002 Refs: EK-PC100-V1
+
+ 001403 VC241-A CTI Professional 350 extended bitmap (color option)
+ 001403 PN: 50-15145
+ 001403 Refs: EK-PC100-V1
+
+ 002004 -------- CTI RX50 5.25" floppy diskette controller
+ 002004 PN: 50-15057
+ 002004 Refs: EK-PC100-V2
+
+ 54-11086 -------- - Power regulator. +15V @ 4A, used in BA11-K
+
+ A009 AD11-K U Analogue-to-Digital Converter for 11/34
+
+ A012 ADV11-A Q 16-channel, 12-bit Analogue-to-Digital Converter
+ A012 Caution: uses BC1 for purposes other than BDAL18
+ A012 Refs: EK-ADV11-OP, MP-00193, EB-20174-20, uNOTE O#108
+
+ A013 MNCAD ? LSI11 BUS IN MINC, 16 Ch 12-bit A/D, QUINT
+
+ A017 NCV11-A Q Dual 4-input MUX, S&H, 8 bit A/D, Quad
+
+ A020 -------- Q A/D, 16-Channel, Relay-switched
+
+ A026 AXV11-C Q 16-channel, 12-bit Analogue-to-Digital plus
+ A026 2-channel, 12-bit Digital-to-Analogue Converter
+ A026 (Also AXV11-D)
+ A026 Refs: EK-AXV11-UG, MP-01291, EK-AXVAB-UG, EK-UDIPD-RC
+ A026 Refs: uNOTE N#044
+
+ A026-PA AXV11-S Q 16-channel, 12-bit Analogue-to-Digital plus
+ A026-PA 2-channel, 12-bit Digital-to-Analogue Converter
+ A026-PA Refs: EK-AXV11-UG, MP-01291, EK-AXVAB-UG, EK-UDIPD-RC
+
+ A029 IAV11-C ? 16 Channel flying cap. ex MUX add-on
+ A029 for IAV11-A
+
+ A030 ADQ32-A Q 200Khz 32 Channel Analogue-to-Digital
+ A030 Converter with DMA
+ A030 Refs: EK-153AA-UG, EK-UDIPA-RC
+
+ A030-PA ADQ32-S Q 200Khz 32 Channel Analogue-to-Digital
+ A030-PA Converter with DMA
+ A030-PA (for BA200 series)
+ A030-PA Refs: EK-153AA-UG, EK-UDIPA-RC
+
+ A1007 AMF01-A Q 48 Channel Addon for ADF01-B (A814-YA)
+
+ A1008 ADV11-D Q Analogue-to-Digital Converter, with DMA
+ A1008 Refs: EK-AV11D-UG, EK-UDIPD-RC
+
+ A1008-PA ADV11-S Q Analogue-to-Digital Converter, with DMA
+ A1008-PA Refs: EK-AV11D-UG, EK-UDIPD-RC
+
+ A1009 AAV11-D Q Digital-to-Analogue Converter, with DMA
+ A1009 Refs: EK-AV11D-UG, EK-UDIPD-RC
+
+ A1009-SA AAV11-S Q Digital-to-Analogue Converter, with DMA
+ A1009-SA (for BA200 series)
+ A1009-SA Refs: EK-AV11D-UG, EK-UDIPD-RC
+
+ A154 MNCAM ? 8 Differential or 16 Single Ended Channel
+ A154 MUX, Quint
+
+ A241 LPSAG-VG U LPS11 4-channel variable gain preamplifier
+
+ A242 LPSAG U LPS11 4-channel fixed gain preamplifier
+
+ A246 MNCAG ? 4 Channel Switched Gain Differential Input
+ A246 Preamp, Quint
+
+ A320E VT40 U VT40 Display generator
+
+ A406 LPSSH U LPS11 Analogue sample-and-hold option
+
+ A406 LPSAD-12 U LPS11 Analogue sample-and-hold (3 of 4)
+
+ A407 LPSAD-12 U LPS11 8-channel A/D multiplexor (4 of 4)
+
+ A410 IAV11-A Q 4/12 Channel Analogue-to-Digital Converter
+
+ A410-PA IAV1S-AA Q 16 Channel Analogue-to-Digital Converter
+ A410-PA S-Box handle
+
+ A410-PO IAV1S-A Q 4/12 Channel Analogue-to-Digital Converter
+ A410-PO S-Box handle
+
+ A410-YA IAV11-AA Q 16 Channel Analogue-to-Digital Converter
+
+ A411 ASM01-A Q 16 Channel Sample and Hold.
+
+ A4002 KWV11-C Q Programmable real-time clock
+ A4002 Refs: uNOTE O#108
+
+ A6001 AAV11-A Q 4-channel, 12-bit Digital-to-Analogue Converter
+ A6001 Caution: uses BC1 for purposes other than BDAL18
+ A6001 Refs: EK-ADV11-OP, MP-00186, EB-20175-20, uNOTE O#108
+
+ A6002 MNCAA ? MINC LSI-11 Bus, 4 Channel, 12-Bit
+ A6002 Digital-to-Analogue Converter, Quint
+
+ A6006 AAV11-C Q 4-channel, 12-bit Digital-to-Analogue Converter
+ A6006 Refs: EK-AXV11-UG, MP-01294, ZJ248-RZ, uNOTE O#108
+
+ A6007 IAV11-B Q 4 Channel Isolated 20ma Analogue output
+
+ A6007-PO IAV1S-B Q 4 Channel Isolated Digital-to-Analogue Converter
+ A6007-PO S-Box handle
+
+ A6009 AAF01-A ? Highspeed Analogue-to-Digital Converter.
+
+ A625 LPSVC U LPS11 Two 12-bit DACs (2 of 2)
+
+ A8000 ADV11-C Q 16-channel 12-bit Analogue-to-Digital Converter
+ A8000 with software-controllable gain
+ A8000 Refs: EK-AXV11-UG, MP-01292, ZJ250-RZ, uNOTE O#108
+
+ A804 LPSAD-12 U LPS11 12-bit A/D Converter (2 of 4)
+
+ A814-YA ADF01-B ? Highspeed Analogue-to-Digital Converter.
+
+ G066 - TU16 9 Channel read amp
+
+ G102 -------- U Sense inhibit card for 11/15
+
+ G109C ???????? ? ?????
+
+ G110 M11 ? U 16 bit 11/05, 11/25, 11/45 Control & Data Loops
+
+ G114 MF11-LP U Sense inhibit (with G235 and H217C, part of memory option)
+
+ G116 MJ11? U SENSE/INHIBIT MODULE part of MJ-11 memory for 11/60/70 (see G236)
+
+ G231 ???????? ? 16K XY Selection, Current source, Address
+ G231 Latch, 8K Decode.
+
+ G235 MF11-LP U 16K XY Drive, Current source, Decode
+ G235 (with G114 and H217C, part of memory option)
+
+ G236 MJ11? U XY DRIVER 32Kw part of MJ-11 memory for 11/60/70 (see G116 H224)
+
+ G651 ???????? U 4-8K 16-18 bit mother board, mates with
+ G651 H221 (with H221-A, part of memory option)
+
+ G401 MS11-BR U 4-Kword 16-bit MOS RAM (11/45)
+
+ G401-YA MS11-BR U 4-Kword 18-bit MOS RAM (11/45)
+
+ G5108 U Writeable programmable logic array tester for F11
+ G5108 chipset
+
+ G5115 U H777-TA power supply tester
+
+ G5148 TU58-AA/BA Q Interface to parallel TU58
+
+ G5152 KXT11-A Q Test module, 4-Kbyte RAM, 24-Kbyte PROM, CSR
+
+ G5167 Q PULSAR (LSI-11 multiprocessor board)
+
+ G5168 Q PULSAR event transmitter
+
+ G5169 Q PULSAR event receiver
+
+ G5173 U 11/60 2355 control
+
+ G5174 U 11/60 2355 4-line tester
+
+ G5215 KDF11-TC Q LSI CPU bus isolator extender
+
+ G5216 Q PULSAR performance monitor
+
+ G5281 Q 11/23 bus exercisor
+
+ G5337 Q 11/03 multi LSI option tester
+
+ G5353 U 11/24 quick verify station controller
+
+ G5616 Q Qbus extender card
+
+ G645 U 8-Kword 19-bit stack board (11/05, 11/25, 11/45,
+ G645 PDP-10)
+
+ G647 U 16-Kword 20-bit stack board (PDP11, PDP10)
+
+ G651 U 4 to 8-Kword 16 to 18-bit mother board
+ G651 (Mates with H221)
+
+ G652 U 16-Kword 16 to 18-bit mother board with logic
+ G652 (Mates with H222-A)
+
+ G652-YA U G652 that mates with H222-YA
+
+ G653 MMV11-A Q 4-Kword 16-bit mother board with logic
+ G653 (mates with H223). Q16/CD-only option.
+ G653 Refs: EB-18451-20, MP-00094
+
+ G657 U 32-Kword SPC core memory electronics with no
+ G657 parity (18-bit)
+
+ G727 U Grant continuity card with DMA link (NPR),
+ G727 single
+
+ G727-A U Grant continuity card
+
+ G7270 U Longer form of G727
+
+ G7271 U Short double-jumper card (MF11-L)
+
+ G7272 Q Grant continuity card
+
+ G7273 U Bus Grant & Non-processor grant
+
+ G736 U jumper module
+
+ G7360 U priority selector, G736 with two sockets
+
+ H114 U (with G114 and G235, part of memory option)
+
+ H207 U 4096x16 core stack for 11/15 (on G616 & G617)
+
+ H211 MM8-EH U 4-Kword 12-bit stack on G648 (for 11/20)
+
+ H213 U 4-Kword 16-bit stack on G645
+
+ H214 U 8-Kword 16-bit H213 (used in MM11-L)
+ H214 (replaced by H215)
+
+ H214-YA U 8-Kword 16-bit H213 (used in MM11-L)
+ H214-YA (replaced by H215) (same as H214, but 850NS)
+
+ H215 U 8-Kword 18-bit (parity) H213 (used in MM11-LP, ME15)
+
+ H216 ? 8K x 19 bit H213, used in MF10
+
+ H217 MF11-LP U 16-Kword 16-bit memory stack (with G114 and G235)
+ H217 (replaced by MA20-M)
+
+ H221-A U 8-Kword 18-bit stack (plugs into G651)
+
+ H221-B U 8-Kword 16-bit stack (plugs into G651)
+
+ H222 MM11-DP U 16-Kword 18-bit stack
+
+ H223 MMV11-A Q 4-Kword 16-bit stack & drive assembly
+ H223 (plugs into G653)
+ H223 Refs: EB-18451-20, MP-00094
+
+ H224 U 32-Kword 18-bit core stack
+
+ H228-B MM11-YP U 32-Kword 18-bit 14-mil core stack
+ H228-B (plugs into G657)
+
+ H3006 8-Line RS232 Distribution panel
+
+ H3020 DMF32 Multi-function distribution
+
+ H315 Test Connector
+ H315 (DH11, DL11E, DL11W, DLV11, DQ11, DU11, DUV11)
+
+ H317-B Distribution Panel (DH11)
+
+ H317-E Distribution Panel, EIA (DZ11)
+
+ H317-F Distribution Panel, 20mA (DZ11)
+
+ H3173-A Distribution Panel
+
+ H3190 DZ11 Test connector
+
+ H325 Line loopback test connector
+ H325 (DMV11, DMP11, DMR11, DPV11,
+ H325 DUP11, DV11, DZ11, DZV11)
+
+ H3250 Test Connector (DMC11, DMP11, DMR11, DMV11)
+
+ H3251 Test Connector (DMP11, DMR11, DMV11)
+
+ H3254 Test Connector (DMP11, DMR11, DMV11)
+
+ H3255 Test Connector (DMP11, DMR11, DMV11)
+
+ H3257 Terminator Test Connector (DMP11, DMR11, DMV11)
+
+ H3258 Terminator Test Connector (DMP11, DMR11, DMV11)
+
+ H3259 Cable Turnaround test connector (DPV11, DZ32)
+
+ H3260 Cable Turnaround test connector (DPV11)
+
+ H327 DZ11 Turnaround connector
+
+ H3271 Staggered Turnaround Test Connector (DZ11[-x])
+
+ H3272 Test Connector (DZ32)
+
+ H3273 Test Connector (DZ11-X)
+
+ H3274 Test Connector (DZ11)
+
+ H3277 Staggered loopback test connector
+
+ H329 DZV11 Comm Loopback test connector
+
+ H349 Distribution panel
+
+ H7004-B 20mA Static Filter
+
+ H7004-C EIA Static Filter
+
+ H7104-C Power regulator, +2.5V 85A, used in VAX-11/750
+ H7104-C Refs: MP-01020
+
+ H7104-D Power regulator, +5V 120A, used in VAX-11/750
+ H7104-D Refs: MP-01021
+
+ H7105 Power regulator, +15V, used in VAX-11/750
+
+ H744 Power regulator. +5V @ 25A, used in BA11-K
+
+ H745 Power regulator. -15V @ 10A, used in BA11-K
+
+ H754 Power regulator. +20V @ 8A, and -5V @ 1.1A,
+ H754 used in BA11-K.
+
+ H780 Power supply (used in BA11-M)
+ H780 (120vac: -A, -C, -E, -H, -K, -M, -P,
+ H780 240vac: -B, -D, -F, -J, -L, -N, -R)
+ H780 Refs: EK-H780C-OP, EB-07948-53, MP-H780
+
+ H781 Power supply (used in BA11-M)
+
+ H7835 Power supply (used in VT103 terminal)
+
+ H786 Power supply (used in BA11-N)
+
+ H7861 Power supply (used in BA11-N)
+
+ H7862 Power supply (used in Professional 300 series)
+ H7862 Refs: EK-PC100-V1
+
+ H7864 Power supply (used in BA23)
+
+ H7868-A Power supply 120Vac (used in BA213 VAX cabinet)
+
+ H8611 Test Connector (DH11)
+
+ H8612 Test Connector (DV11)
+
+ H861C Test Connector (DH11, DV11)
+
+ H9270 DDV11-A Q 4 x 4 Qbus backplane, Q18 (used in BA11-M)
+
+ H9270-Q Q 4 x 4 Qbus Backplane, Q22 (used in BA11-M)
+
+ H9273-A Q 4 x 9 Qbus backplane, Q18/CD
+
+ H9275(-A) Q 4 x 9 Qbus backplane, Q22 (used in BA11-N)
+ H9275(-A) Refs: EK-H927A-CG, uNOTE N#035
+
+ H9276(-A) Q 4 x 9 Qbus backplane, Q22/CD (used in BA11-N)
+
+ H9278(-A) Q 4 x 8 Qbus backplane (used in BA23)
+ H9278(-A) 3 slots (1-3) Q22/CD, 5 slots (4-8) Q22
+
+ H9281-BA Q 2 x 4 Qbus backplane, Q18 (used in BA11-VA)
+
+ H9281-BB Q 2 x 8 Qbus backplane
+
+ H9281-C Q 2 x 12 Qbus Backplane
+
+ H9281-QA Q 2 x 4 Qbus backplane, Q22, dual height
+
+ H9281-QB Q 2 x 8 Qbus backplane, Q22, dual height
+
+ H9281-QC Q 2 x 12 Qbus backplane, Q22, dual height
+
+ KC341 U Microprocessors Series (MPS) Monitor/Control Panel
+
+ L2001 KA60 M 80NS CMOS SMP Dual CPU w/64kb snoopy cache
+
+ L2002 VS600 M M-Bus to Q-Bus adapter module
+
+ L2003 VS600 M I/O Controller module for DSSI/SCSI, Ethernet,
+ L2003 printer, modem, keyboard, mouse/tablet
+
+ L2004 VS600 M LEGSS Graphics Base module w/accelerator
+
+ L2005-AA VS600 M LEGSS 8-plane output module
+
+ L2006-AA VS600 M LEGSS 16-plane memory upgrade
+
+ L2007-A MS60 M 8Mb memory array with 1Mb chips
+
+ L2007-B MS60 M 16Mb memory array with 1Mb chips
+
+ L2007-C MS60 M 32Mb memory array with 1Mb chips
+
+ L2008 VS600 M TQK70 Tape adapter module
+
+ L2010-AA KA60 M 60NS CMOS SMP Dual CPU w/64kb snoopy cache,
+ L2010-AA 1Mbit video ram, FBIC interface chip to M-Bus,
+ L2010-AA VDAC CLR Graphics chip
+
+ L4002-AA KA675 - vax 4000/600 CPU card
+
+ L4002-BA KA675 - vax 4000/500 CPU card
+
+ L4002-CA KA675 - vax 4000/400 CPU card
+
+ L4004-BA MS690-BA - 32 MByte DRAM for VAX 4000 /400 /500 /600
+
+ L4004-CA MS690-CA - 64 MByte DRAM for VAX 4000 /400 /500 /600
+
+ L4004-DA MS690-DA - 128 MByte DRAM for VAX 4000 /400 /500 /600
+
+ M105 U Device selector for PDP-11
+ M105 (Also called Address selector module)
+
+ M109 U PDP-11 device selector with jumpers, bits 13-17
+
+ M1091 U Memory device selector, with jumpers, bits 11-17
+
+ M1500 U Bidirectional bus interfacing gates [pdp8/pdp11]
+
+ M1501 U Bus input interface (16 drivers)
+
+ M1502 U 16-bit bus output interface
+
+ M1621 U Digital voltmeter data input interface for
+ M1621 Fluke 8200A/8400A, H-P 3450A/3480A, Data
+ M1621 Precision 2000, Systron-Donner 7110, Dana 4800
+ M1621 M105 or eqvt is required. May use M7820
+
+ M1623 U Instrument remote control interface.
+ M1623 Supports DVMs as M1621 + programmable PSUs:
+ M1623 Fluke 4210A/4216A/4250A/4265A,
+ M1623 H-P 6129B/6130B/6131B
+ M1623 M105 or eqvt is required. May use M7820
+
+ M167 U Compares two 8-bit words ( <, =, > )
+
+ M1801 U 16-bit reed relay output interface
+
+ M2009 CE11 U Set point register
+
+ M2010 CE11 U 2 Channel impulse counter
+
+ M224 KA11 U 11/20 8-bits with data paths module, 2 latches,
+ M224 adder.
+
+ M225 KA11 U 11/20 registers module (processor memory)
+ M225 16 bits x 16 bits
+
+ M234 KE11-A U 3 8-bit registers, adder & L/R shift
+
+ M239 U 3 4-bit counters (8291s) or 74197, parallel load
+
+ M244 U 6 Ckts, Each 3 input Mux with latch, non-inverting
+
+ M2500 U 2 64-word 4-bit MOS FIFO memories (needs -12V)
+
+ M2500-YA U M2500 with filter cap on line U1
+
+ M2501 DMA01-A U Dual 8*4 bit RAM (4 74170's)
+
+ M2501-YA U M2501 with 1.2K resistive pullups on RAM outputs
+
+ M2503 ADC01 U Dual 256 bit Schottky RAM (3106's)
+
+ M2504 U Dual 256*4 RAM, common address, separate data I/O
+
+ M259 KT11 U Associative memory, 2x8, shift register
+ M259 capability
+
+ M3100 DECSA U EIA sync line unit for DECSA
+
+ M3101 DECSA U V.35 sync line unit for DECSA
+
+ M3102 DECSA U 2-line async line unit for DECSA
+ M3102 (DEC/DLC/DRCSA)
+
+ M3103 DECSA U LP line unit for DECSA
+
+ M3104 DHV11-A Q 8-line Asynchronous Multiplexor, with DMA
+ M3104 Refs: EK-DHV11-TM, EK-DHV11-MC, MP-01783, ZJ362-RZ
+ M3104 Refs: uNOTE N#041
+
+ M3105 DHU11-A U 16-line async DMA MUX
+ M3105 Refs: EK-DHU11-UG
+
+ M3106 DZQ11-M Q 4-line double-buffered async MUX, EIA 50-10KB,
+ M3106 with modem control; replaces M7957 (dual height)
+ M3106 Refs: EK-DZQ11-UG, EK-DZQ11-MC, EK-DZQ11-TM, MP-01795
+ M3106 Refs: ZJ251-RZ
+
+ M3106-PA DZQ11-SA Q 4-line double-buffered async MUX with S-box handle
+ M3106-PA Refs: EK-DZQ11-UG, EK-DZQ11-MC, EK-DZQ11-TM, MP-01795
+ M3106-PA Refs: ZJ251-RZ
+
+ M3107 DHQ11-M Q 8-line async MUX module, DMA, Q22
+ M3107 Refs: EK-DHQ11-TM, EK-DHQ11-UG
+
+ M3108 DSV11-A Q 2-line sync SLU for BA23/123 (-AA is first unit,
+ M3108 -AB is second add-on unit).
+ M3108 Refs: EK-DSV11-TD, EK-DSV1M-IN, EK-DSV1M-UG, EK-DSV11-IN
+ M3108 Refs: EK-DSV11-UG
+
+ M3108-PA DSV11-S Q 2-line sync SLU for BA223 (-SF is first unit,
+ M3108-PA -SG is second add-on unit).
+ M3108-PA Refs: EK-DSV11-TD, EK-DSV1M-IN, EK-DSV1M-UG, EK-DSV11-IN
+ M3108-PA Refs: EK-DSV11-UG
+
+ M3110 DRCSA U Protocol assist #1 w/special character check
+ M3110 and CRC (DEC/DLC/DRCSA)
+
+ M3111 DRCSA U Protocol assist #2 w/special character check
+ M3111 and CRC (DEC/DLC/DRCSA)
+
+ M3112 DRCSA U Console boot terminator (DEC/DLC/DRCSA)
+
+ M3117 DHZ11 Q 16-line Asynchronous Multiplexor
+
+ M3118-YA CXA16-A Q 16-line Asynchronous Multiplexor w/DEC423 output
+ M3118-YA (for BA200 series only)
+ M3118-YA Refs: EK-CAB16-TM, EK-CAB16-UG
+
+ M3118-YB CXB16-A Q 16-line Asynchronous Multiplexor w/DEC423 output
+ M3118-YB (for BA200 series only)
+ M3118-YB Refs: EK-CAB16-TM, EK-CAB16-UG
+
+ M3119-YA CXY08-A Q 8-Line Asynchronous Multiplexor w/DEC423 output
+ M3119-YA (for BA200 series only)
+ M3119-YA Refs: EK-CXY08-TM
+
+ M3121-PA DFA01-AA Q Dual integral modem with S-box handle,
+ M3121-PA DF224 compatible, US/CAN
+ M3121-PA Refs: EK-CAB16-TM, EK-DFA01-IN
+
+ M3123 DHF11 Q 32-line Async MUX, Fiber optic I/O for BA223
+
+ M3123-YA DHF11 Q 32-line Async MUX, Fiber optic I/O
+
+ M3124 CXA08-M Q 8 line async MUX w/nmc, ITEG handle,
+ M3124 w/DEC423 Out
+
+ M3125 Q BITBUS to Qbus interface
+
+ M3125-PA Q Qbus interface to Intel BITBUS, Q22, RS485,
+ M3125-PA with S-box handle
+
+ M3125-YA Q Qbus interface to Intel BITBUS, Q22, no handle
+
+ M3126 DFA01-BA Q Dual integral modem with S-box handle, UK version
+
+ M3127-PA DESQA-SA/SF Q Ethernet/thinwire adapter (DELQA+DESTA)
+ M3127-PA with S-box handle
+
+ M3127-PB DESQA-SA/SF Q M3127-PA with handle access thinwire pushbutton
+ M3127-PB switch.
+
+ M3128 QBIC Q Qbus interface to VMI CCIC
+
+ M3129 KMV11 Q NRZI/RS422 data Converter for KMV11
+ M3129 (renamed KMV1A)
+
+ M3130-GA IGQ11 Q 2 Port GE-Genius bus to Q-bus for GE-FANUC
+
+ M3130-GB IGQ11 Q 1 Port GE-Genius bus to Q-bus for GE-FANUC
+
+ M3130-PA IGQ11 Q Q22-bus interface to GE-Genius bus
+ M3130-PA with S-box handle
+
+ M3130-SA IGQ11 Q 2-Port GE-Genius bus to Q-bus
+
+ M3130-SB IGQ11 Q 1-Port GE-Genius bus to Q-bus
+
+ M3130-YA IGQ11 Q GE-Genius bus to Q-bus interface, standard handle
+
+ M3133 DRQ3B Q RS-422 Signal conditioning module for DRQ3B
+
+ M3134-PA DS500 Q IBM Terminal server, 4 port (DECServer 500)
+
+ M3135-01 Q Multi-line DECVoice, Q-bus for multiple channels,
+ M3135-01 50 MHz clock
+
+ M3135-02 Q Multi-line DECVoice, Q-bus for multiple channels,
+ M3135-02 60 MHz clock
+
+ M3136 Q Q-bus module connects M3135 to T1 telephone service
+
+ M3137-AA DEVIS Q +12V power module for DEVIS (VAXCAMERA)
+
+ M3138-AA KRQ01-AA Q Data cipher module for Qbus
+
+ M4000 CE11, CEV11 ? 16-bit programmable clock
+
+ M4001 DMS11-F ? Clock
+
+ M4002 KWV11-C Q Programmable Real-Time Clock
+ M4002 Refs: EK-AXV11-UG, MP-01293, EK-AXVAB-UG, EK-UDIPD-RC
+ M4002 Refs: EK-KWV1C-CG, ZJ247-RZ, uNOTE N#044
+
+ M4002-PA KWV11-S Q Programmable Real-Time Clock
+ M4002-PA Refs: EK-AXV11-UG, MP-01293, EK-AXVAB-UG, EK-UDIPD-RC
+ M4002-PA Refs: ZJ247-RZ, uNOTE N#044
+
+ M4003-AA Q Realtime clock for Qbus 32-bit counter, 10MHz
+
+ M4003-PA Q Realtime clock for Qbus 32-bit counter, 10MHz
+ M4003-PA with S-box handle
+
+ M454 DC11-A U Crystal clock with simultaneous outputs of 28.8,
+ M454 19.2, 9.6, 4.8, 2.4, 1.760 KHz
+ M454 (for DC11-A, DP11-A)
+
+ M4540 DC11, DH11 U M454 with more frequencies available
+
+ M5001 CIS11-B ? 8 channel optically isolated inputs
+
+ M5001-YA ? M5001 with 24V voltage sense inputs
+
+ M5001-YB ? M5001 with 24V contact sense inputs
+
+ M5001-YC ? M5001 with customized inputs
+
+ M5010 D 32-bit non-isolated dc input module (IP11)
+ M5010 I/O Daisy chain bus, 32-bit 55V (6V threshold)
+ M5010 Non-isolated DC sense
+
+ M5011 D 16-bit non-isolated dc input module (IP11)
+ M5011 I/O Daisy chain bus, 16-bit, 55V (6V threshold)
+ M5011 Non-isolated change of state interrupt
+
+ M5012 D 16-bit isolated dc input module (IP11)
+ M5012 I/O daisy chain bus, 16-bit, 55V (6V threshold)
+ M5012 Isolated DC sense
+
+ M5012-YA D M5012 with TTL compatible inputs (IP11)
+
+ M5013 D 8-bit isolated ac input module (IP11)
+ M5013 I/O daisy chain bus, 8-bit, 120VAC
+ M5013 (46-75V threshold) isolated AC sense, one
+ M5013 bit interrupts
+
+ M5014 D Dual input counter, 16-bit (IP11)
+ M5014 I/O daisy chain bus, dual 16-bit input counter
+
+ M5015-YM CSC11 D M5015-YF with flags inhibited
+
+ M5016 D Quad input counter/prescalar, 8-bit (IP11)
+ M5016 I/O daisy chain bus, quad 8-bit counter/prescaler
+
+ M5017 CE11,CEV11 ? Signal receiver (5V contact sense)
+
+ M5017-YC CE11,CEV11 ? Signal receiver (12V opto input)
+
+ M5019 CE11,CEV11 ? Input function module (SSMU)
+
+ M5020-YA CSC11 ? 32 bit OCI with 600V isolation and filter
+ M5020-YA 3ms, 5V input
+
+ M5020-YB CSC11 ? 32 bit OCI with 600V isolation and filter
+ M5020-YB 3ms, 12V input
+
+ M5020-YC CSC11 ? 32 bit OCI with 600V isolation and filter
+ M5020-YC 3ms, 48V input
+
+ M5020-YD CSC11 ? 32 bit OCI with 600V isolation and filter
+ M5020-YD 3ms, 129V input
+
+ M5020-YF CSC11 ? 36 bit OCI with 600V isolation and filter
+ M5020-YF 3ms, 5V input
+
+ M5020-YG CSC11 ? 36 bit OCI with 600V isolation and filter
+ M5020-YG 3ms, 12V input
+
+ M5020-YH CSC11 ? 36 bit OCI with 600V isolation and filter
+ M5020-YH 3ms, 48V input
+
+ M5020-YJ CSC11 ? 36 bit OCI with 600V isolation and filter
+ M5020-YJ 3ms, 129V input
+
+ M5020-YN CSC11 ? 32 bit OCI input 15VDC, 2ms delay, common V
+
+ M5020-YP CSR11 ? 32 bit OCI input, 5VDC, 4.5ms delay
+
+ M5020-YR CSC11 ? M5020-YE with slow flag response
+
+ M5026 IDV1S-A Q 16-bit opto-isolated input module
+
+ M5026-PO IDV1S-A Q 16-bit opto-isolated input module
+ M5026-PO with S-box handle
+
+ M5027 KMS11 ? 8 channel RS232 to RS422 converter
+
+ M5028 DRU11-C U Optocoupler conditioning module for DRU11-C
+
+ M5031 D 16-channel isolated dc interrupt module, 16-bit
+ M5031 (IP11)
+
+ M586 DF11-BA U Integral modem, 103 standard
+
+ M587 DF11-BB U Async internal modem, answer-only, Bell CBS or CDT
+
+ M5900 DJ11 U 16-channel TTL receiver
+
+ M5901 DJ11 U 16-channel EIA transmitter
+
+ M5902 DJ11 U 16-channel full duplex TTY transceiver
+
+ M5903 RH11 U MASSBUS terminal transceiver
+
+ M5904 RH11 U MASSBUS control transceiver
+
+ M5906 DJ11-AD/AE U 16-channel EIA-TTL, TTL-EIA, priority sockets,
+ M5906 DH11-AD/AE 2 H854.
+
+ M5906-YA DJ11-AD/AE U M5906 modified to accept X1 baud clock rate
+
+ M591 U 5 Channel EIA to DEC, 4 Channel DEC to EIA
+
+ M5912-YA DFS11-MA U Private wire integral modem, 1 Megabaud, DF11 pins
+
+ M5912-YB DFS11-MB U 500 Kbaud M5912-YA
+
+ M5912-YC DFS11-MC U 240 Kbaud M5912-YA
+
+ M5912-YD DFS11-MD U 56 Kbaud M5912-YA
+
+ M5912-YE DFS11-ME U 100 Kbaud M5912-YA
+
+ M5915 MNCDI U Digital input to MINC, 16 lines, Quint height
+
+ M5916 U 24 Differential transmitters and 24 Differential
+ M5916 Receivers, Quad
+
+ M5916-YA DR11-L,-M U Differential adapter
+
+ M5916-YB DMA01-A U Differential adapter
+
+ M5917 CRS11-LL U Differential drive for card readers, 17 in, 1 out
+
+ M5922 U RM03 transceiver port A
+
+ M5923 U RM03 transceiver port B
+
+ M5924 DF11-L U Fiber optic link
+
+ M5925 LPC01-V U 6 differential receivers, 10 differential drivers
+
+ M5926 DSZ11-B U Add-on for TTL 20mA loop conversion
+
+ M5927 DAV11 U TTL to differential transceiver (Like
+ M5927 M7230 except all signals from 3 H854)
+
+ M5927-YA DR11-C U DR11-C Compatible Differential line driver
+
+ M5928 DMS11-F U DMS11-F, Modem level Converter, TTL/RS423
+
+ M5929 MTS02-BD U Multidrop interface
+
+ M5931 DM11-XM U EIA to/from MIL188C/100/114
+
+ M5932 DM11-XF U EIA to/from fiber optic cable
+
+ M5935 DF11-WA U 10 5V 70mA outputs, 2 inputs
+
+ M594 DF11-A U 8 channel EIA-CCITT to DEC, 7 DEC to EIA-CCITT
+ M594 3V hysteresis
+
+ M594-YB DF11-A U M594 with 3V hysteresis
+
+ M5941 DFS11-H U 8 channel MIL188C to DEC interface for DFS11-H
+
+ M5941-YA DFS11-HA U 8 channel MIL188C to DEC Interface for
+ M5941-YA data lines only
+
+ M5941-YB DFS11-HB U 75 Baud 8 Ch MIL188C to DEC Interface
+
+ M5941-YC DFS11-HC U 110 Baud 8 Ch MIL188C to DEC Interface
+
+ M5941-YD DFS11-HD U 150 Baud 8 Ch MIL188C to DEC Interface
+
+ M5941-YE DFS11-HE U 300 Baud 8 Ch MIL188C to DEC Interface
+
+ M5941-YF DFS11-HF U 600 Baud 8 Ch MIL188C to DEC Interface
+
+ M5941-YH DFS11-HH U 1200 Baud 8 Ch MIL188C to DEC Interface
+
+ M5941-YJ DFS11-HJ U 2400 Baud 8 Ch MIL188C to DEC Interface
+
+ M5941-YK DFS11-HK U 3600 Baud 8 Ch MIL188C to DEC Interface
+
+ M5941-YL DFS11-HL U 4800 Baud 8 Ch MIL188C to DEC Interface
+
+ M5941-YM DFS11-HM U 9600 Baud 8 Ch MIL188C to DEC Interface
+
+ M5941-YN DFS11-HN U 50K Baud 8 Ch MIL188C to DEC Interface
+
+ M5942 DF11-L U 8 channel EIA-CCITT to DEC, 7 DEC to EIA-CCITT,
+ M5942 300,600,1200,1800 baud crystal clock
+
+ M5943 DM11-DR U 5 channel EIA-CCITT to TTL
+ M5943 4 channel TTL to Tri-state
+
+ M5943-YA DM11-DS U M5943 modified to permit other drivers and
+ M5943-YA receivers on same lines
+
+ M5946 DFS11-A U 8 channel differential drive and receiver,
+ M5946 40mA, 0 to +5V, receiver +15 to -15V.
+
+ M5947 DR11-BD U M919 with differential drive and receive
+ M5947 with 3 H855
+
+ M5948 CSC11 U Interface and serial Y-bus connector
+
+ M5949 DMC11-DA U EIA to MIL188-114 Converter
+ M5949 7 receivers, 4 drivers
+
+ M595 DF11 U Current mode Converter for 301 and 303 modem
+
+ M5951 Q 100 Mbit transceiver, single line, used in Hydra
+
+ M5952 DFS11-BA U 5 channel TTL to RS422, 8 channel RS422 to TTL
+
+ M5952-YA DFS11-BB U 5 channel TTL to MIL 188-114,
+ M5952-YA 8 channel MIL 188-144 to TTL
+
+ M5952-YB DFS11-?? U 5 channel EIA RS232C to RS422,
+ M5952-YB 8 channel RS422 to RS232C
+
+ M5952-YC DFS11-?? U 5 channel EIA RS232C to MIL 188-114,
+ M5952-YC 8 channel MIL188-114 to RS232C
+
+ M5953 DV11/DZ11 U 16 EIA to TTL, 24 TTL to EIA, conn for DV11, DZ11
+
+ M596 DF11 U 20mA to DEC, DEC to 20mA, 4 channel each,
+ M596 replaced by M5960
+
+ M5960 DF11 U Replaces M596
+
+ M597 DX11 U 6 channel IBM receiver + bus
+
+ M5970 PC500 U PC500 TCY Control Module
+
+ M5971 DZQ11/DHQ11 Q 4 channel EIA to 20mA Converter
+
+ M5973 LLD11 U TTL to differential transceiver
+
+ M5974 LN01K-AA U TTL to differential transceiver
+ M5974 (9 transmit, 2 receive)
+
+ M5975 Q DECServer 500 support for IBM3270 class terminals
+
+ M5976-AA KZQSA Q Qbus to SCSI adapter
+
+ M5976-SA KZQSA-SA Q Qbus to SCSI adapter (for BA200/400 enclosures)
+ M5976-SA with S-box handle
+
+ M5977-AA RQZX1 Q Qbus to SCSI disk (MSCP) and tape (TMSCP) adapter
+
+ M598 DF11-K U 1 Channel optical coupled 20ma to DEC send/recv
+
+ M5980 U 10-channel TTL differential transeiver
+
+ M5982 DWQVA Q 2 channel fiber optic interface (IFQ), Qbus to
+ M5982 Stealth bus
+
+ M599 U 4 channel Xmit and Rec Western Union High Level
+ M599 (+/- 6V 10mA) Telex
+
+ M6003 MNCDO Q 16 Channel Digital output, MINC, Quint
+
+ M6010 D 32-bit non-isolated dc output module (IP11)
+
+ M6010-YA D 32-bit non-isolated dc output module (TTL, IP11)
+
+ M6011 D Non-isolated dc one-shot output module (IP11)
+
+ M6012 D 8-bit optical isolated dc output module (IP11)
+
+ M6013 D 8-bit isolated ac output module (IP11)
+
+ M6014 D Dual 16-bit output Converter (IP11)
+
+ M6015 D 16-bit retentive dc output module (IP11)
+
+ M6029 IDV11-B ? 16-bit Opto Isol. outputs
+
+ M688 U UNIBUS power fail driver module
+
+ M7013 ???????? ? Vector Generator and Character Generator
+ M7013 Control, VT40
+
+ M7014 ???????? U Unibus Controller and Bootstrap for VT40
+
+ M7014-YA ???????? U M7014 w/No Bus Terminators
+
+ M7015 LPS11-S U LPS11 UNIBUS control
+
+ M7016 LPSKW U LPS11 Programmable realtime clock & 2 Schmitt
+ M7016 triggers.
+
+ M7017 LPSDR U LPS11 16-bit buffered digital I/O
+
+ M7018 LPSAD-12 U LPS11 A/D control (1 of 4)
+
+ M7019 LPSVC U LPS11 Scope control (1 of 2)
+
+ M7020 LPS11-NP U LPS11 DMA option
+
+ M7025 KW11-K U Dual programmable clock
+
+ M7028 DMS11-F U DMS11-F, KMC11-A Line Unit Interface
+
+ M7028-YA DMS11-F U DMS11-F, KMC11-A Line Unit Interface + Terminator
+
+ M7029 DMS11-F U Line unit interface W HDLC protocol
+
+ M7030 CTS11-J U Control for CTS11-J
+
+ M7031 CTS11-J U Drivers, receivers, code Converter for CTS11-JA
+
+ M7032 CTS11-J U Drivers, receivers, code Converter for CTS11-JB
+
+ M7033 U Scanner module for use with Hickok card equipment
+
+ M7034 U 80 Column driver for use with Hickok card equipment
+
+ M7035 U 22 Column driver for use with Hickok card equipment
+
+ M7036 U Diode Module assembly for use with Hickok card
+ M7036 equipment
+
+ M7037 U Reader-Control module for true data card/bade reader
+
+ M7039-BC MS220-A Q KN220 64 MB mem, Fujitsu DRAMS
+
+ M7039-CC MS220-A Q KN220 128 MB mem, Fujitsu DRAMs
+
+ M7051 U VT48 data registers & multiplexors
+
+ M7052 U VT48 dual 12x12 multiplier with successive
+ M7052 approximation.
+
+ M7053 U VT48 scissoring & tangent control
+
+ M7054 U VT48 stack & silo control
+
+ M7055 U VT48 display status MUX
+
+ M7056 U VT48 stack & silo
+
+ M7057 U VT48 display status register
+
+ M7058 U VT48 display control
+
+ M7059 U VT48 bus control
+
+ M7060 U VT48 push button control (SPC)
+
+ M7061 VSV11-F Q Raster graphics sync generator & cursor control
+ M7061 (also VSV11-H, -J, -K)
+ M7061 Refs: EK-VSVFQ-UG, MP-01012, EK-VT101-TM, YM-C193C-00
+
+ M7062 VSV11-MA Q Raster graphics image memory
+ M7062 Refs: EK-VSVFQ-UG, MP-01012, EK-VT101-TM, YM-C193C-00
+
+ M7064 VSV11 Q Raster graphics image processor
+ M7064 (18-bit DMA only)
+ M7064 Refs: EK-VSVFQ-UG, MP-01012, EK-VT101-TM, YM-C193C-00
+
+ M7065 U Synch line receiver, 6, 7 or 8 bits
+
+ M7066 VTV01 U Video Display Sys: UNIBUS to Qbus Converter
+
+ M7067 VMV21 U Video Display Sys: sync generator & character
+ M7067 generator (64-char, 25 lines).
+
+ M7068 VMV31 U Video Display Sys: bit map, 128 x 128 x 4
+
+ M7069 VMV22 U Video Display Sys: microprocessor & memory
+
+ M7070 VMV22 U Video Display Sys: character & sync generator
+
+ M7071 U Video Display Sys: image memory, RAMs & buffer
+ M7071 logic.
+
+ M7075 U Sync line transmitter; 6-, 7- or 8-bits
+
+ M7078 U 4 pulse synchronizers (74120)
+
+ M7079 U 16 Channel badge reader
+
+ M7081 LA120 - LA120 control, hex with no fingers, 7-wire
+ M7081 printhead version
+
+ M7081-YB LAS12 - M7081 with ROMs for LAS12, LA124
+
+ M7081-YD LA120-RB - M7081 with increased head drive current for thick
+ M7081-YD forms
+
+ M7082 DMA01 U Single DMA Mux channel
+
+ M7083 DMA01 U 8-level priority arbiter
+
+ M7084 DB11-H U DB11-H Control
+
+ M7086 PTV11-E Controller for FACIT 4070
+
+ M7088 CE11 U CE11, CEV11 interrupt register
+
+ M7089 U Quad transceiver
+
+ M7090 KD11-Z U 11/44 console interface module
+ M7090 Refs: EK-KD11Z-TM
+
+ M7091 KE44-A U 11/44 CIS control store module
+ M7091 Refs: EK-KE44A-YM
+
+ M7092 KE44-A U 11/44 CIS data path/logic module
+
+ M7093 FP11-F U 11/44 floating point module
+
+ M7094 KD11-Z U 11/44 data path module
+
+ M7095 KD11-Z U 11/44 control module
+
+ M7096 KD11-Z U 11/44 multifunction module
+
+ M7097 KK11-B U 11/44 4-Kword cache module
+
+ M7098 KD11-Z U 11/44 UNIBUS interface
+
+ M7114 VT30-H U RBG graphics UNIBUS interface board
+ M7114 (TV sync generator, memory, control & output)
+
+ M7130 DTQNA Q Token-bus (IEEE 802.4) to Qbus Network Adapter
+ M7130 Controller module
+
+ M7131 DTQNA Q Token-bus to Qbus Network Adapter
+ Modem module, used with M7130
+
+ M7132 DTC04 Q DECVoice main processor board (dual height)
+
+ M7133 KDF11-UA U 11/24 CPU board, line clock & 2 SLUs
+ M7133 (Revision D or earlier)
+
+ M7133-YA KDF11-UA U 11/24 CPU board, line clock & 2 SLUs
+ M7133-YA (Revision E or later)
+
+ M7134 KT-24 U 11/24 UNIBUS map (extended address to 22 bits)
+
+ M7135 KD32-AA Q MicroVAX I datapath with G floating point
+ M7135 Refs: EK-KD32-OM, EK-KD32A-OM-CN1, uNOTE N#021
+
+ M7135-YA KD32-AB Q MicroVAX I datapath with D floating point
+ M7135-YA Refs: EK-KD32-OM, EK-KD32A-OM-CN1, uNOTE N#021
+
+ M7136 KD32-AA/AB Q MicroVAX I memory control
+ M7136 Refs: EK-KD32-OM, EK-KD32A-OM-CN1, uNOTE N#021
+
+ M7138 LNV21 Q Q-bus to laser printer DMA interface module
+
+ M7139-AA VS200 Q Microvax II CPU, Q-bus interface, console,
+ M7139-AA Network controller, 2MB memory, option connector,
+ M7139-AA private memory bus controller
+
+ M7139-AC VS200 Q M7139 with Fuji 256K parts
+
+ M7139-AF VS200 Q M7139 with Hitachi 256K parts
+
+ M7139-AH VS200 Q M7139 with NEC 256K parts
+
+ M7142 VK170-CA Q Serial video module, CRT control logic,
+ M7142 ASCII in/video out
+ M7142 Refs: EK-M7142-UG, MP-00775
+
+ M7145 R80 - R80 servo control and position detector, hex board
+
+ M7147 DV11 U M7808 (M7247+M7246) with synchronized scanner
+
+ M7148 CE11-D U CE11-D Unibus interface
+
+ M7149 CE11-D U CE11-D Port control
+
+ M7150 CE11-D U MIOS Bus usage arbitration
+
+ M7151 CE11-D U MIOS bus monitor
+
+ M7152 CE11-D U Maintenance and processor fail alarm
+
+ M7153 CE11-D U Mulitplexed input function module
+
+ M7154 CE11-D U Multiplexed input channel selector
+
+ M7157 DRJ11-A U Line interface, EIA receiver, sync logic, buffer
+ M7157 logic
+
+ M7158 DRJ11-A U Unibus interface, NPR, bus MUX and transceiver
+
+ M7160 HSC50 U HSC50 SERDES emulator
+
+ M7161 UDA50 U UNIBUS SDI disk adapter PR board, no ROMs (1 of 2)
+ M7161 Refs: EK-UDA50-UG
+
+ M7161-YA UDA50 U M7161 with blasted ROMs
+ M7161-YA Refs: EK-UDA50-UG
+
+ M7162 UDA50 U UNIBUS SDI disk adapter SI board (2 of 2)
+ M7162 Refs: EK-UDA50-UG
+
+ M7164 KDA50-Q Q Qbus SDI disk adapter, Q22 (1 of 2) (QDA SDI)
+ M7164 Refs: EK-KDA5Q-UG, uNOTE N#041
+
+ M7165 KDA50-Q Q Qbus SDI disk adapter, Q22 (2 of 2) (QDA SDI)
+ M7165 Refs: EK-KDA5Q-UG, uNOTE N#041
+
+ M7166 ? Expands BI bus to UNIBUS (KA820)
+
+ M7168 VCB02, QDSS Q 4-plane colour bitmap module
+
+ M7169 VCB02, QDSS Q 4-plane video controller module
+
+ M7177 DN01-AA Q Aut call unit, cable sockets to DLV11, phone line
+
+ M7179 MPM11 U Mem port control for MPM11
+
+ M718 U Bus interface for PDP-11
+
+ M7181 CMV11-AA Q CMR Host controller for Qbus to Qbus interface
+
+ M7182 CMV11-AA Q CMR Host controller for Q-bus micro control and
+ M7182 4 serial ports
+
+ M7183 CMR01-AA U Micro control for expanded CMR01-AA
+
+ M7184 CMR01-AA U R-bus control for expanded CMR01-AA
+
+ M7185 CMR01-AA U 24kbyte EPROM for expanded CMR01-AA
+
+ M7186 CMR01-AA U 8Kbyte static RAM for expanded CMR01-AA
+
+ M7190 DZS11-EA U 8-line statistical comm mux
+
+ M7193 DRQ11-CA Q DMA interface, 16-bit
+
+ M7194 DR11 U Differential signal conditioning module
+
+ M7195-FA MXV11-BF Q 128-Kbyte RAM, 2 async EIA SLU, I/O, clock,
+ M7195-FA 2 28-pin ROM sockets
+ M7195-FA Refs: EK-MXV1B-UG, EK-MXVB2-UG, uNOTEs N#003, N#015
+ M7195-FA Refs: N#019 (O#106), N#020, N#033
+
+ M7196 TSV05 Q TSV05 controller for Q/Q22 bus
+ M7196 Refs: EK-TSV05-TM, MP-01167, EB-18451-20, EB-17723-20
+ M7196 Refs: uNOTE N#041
+
+ M7197 IDV11-D Q 5-channel 16-bit counter module
+
+ M7198 IDV11-D Q 5 channel counter module with S-box handle
+
+ M7206 TSV05 Q TSV05 Q-bus controller
+
+ M7206-PA TSV05 Q TSV05 Q-bus controller, for BA2xx boxes
+
+ M7207 Q Co-processor for image compression & expansion
+ M7207 implemented by using CCITT standard T.3, T.4
+
+ M7208 CMCTS Q CMCTS (Cluster memory controller, SDI controller)
+
+ M7209 CMCTL Q CMCTL (For S-box) Cluster memory controller, SDI
+ M7209 controller)
+
+ M721 KA11 U Bus interface 1, 8-bits gated in and out
+
+ M7210 KE11-A U Data control
+
+ M7212 DB11 U Address line bus repeater control for DB11
+
+ M7213 DB11 U Bus repeater control, for DB11
+
+ M7213-YA DB11 U M7213 with special modifications, 2 jumpers, 2 cuts
+
+ M7216-YA KH11-A U M7216 for KH11-A
+
+ M7217 KP11-A U Power fail and restart
+
+ M7218 KP11-A U Bus requests
+
+ M7219 RC11 U Bus interface
+
+ M7220 RC11 U Clock control
+
+ M7221 RC11 U Disk interface
+
+ M7222 RC11 U Status control
+
+ M7224 RC11 U Unit and track selector
+
+ M7225 RC11 U Status control extender
+
+ M7226 DN11 U DN11 Control
+
+ M7227-YA XY11-A U XY11-A plotter control, 300-400 steps/sec
+
+ M7227-YB XY11-B U XY11-B plotter control, 500-600 steps/sec
+
+ M7227-YC XY11-C,E U XY11-C,E plotter control, 800-1300 steps/sec
+
+ M7227-YD XY11-D U XY11-D plotter control, 1600-1800 steps/sec
+
+ M7228 KW11-P U Real time programmable clock
+
+ M7229 DA11-B U DR11-B interface for DA11-B
+
+ M7230 DA11-BJ U Differential cable driver and receiver
+
+ M7231 KD11-A U 11/40 data paths module
+
+ M7232 KD11-A U 11/40 micro word module
+
+ M7233 KD11-A U 11/40 IR decode module
+
+ M7234 KD11-A U 11/40 timing module
+
+ M7235 KD11-A U 11/40 processor status module
+
+ M7236 KT11-D U 11/40 memory management module
+
+ M7237 U 11/40 stack limit register
+
+ M7238 KE11-E U 11/40 EIS board
+
+ M7239 KE11-F U 11/40 FIS control
+
+ M724 KA11 U 11/20 bus and console control module
+
+ M7240 DM11 U DM11-A control
+
+ M7241 DM11 U DM11-B control, quad
+
+ M7242 DM11 U DM11-C control
+
+ M7243 DM11 U DM11 transmitter D
+
+ M7244 DM11 U DM11 transmitter E
+
+ M7245 DM11 U DM11 receiver, quad
+
+ M7246 DM11-BB U Modem control scan, 16 lines, DM11-BB
+
+ M7247 DM11-BB U 8 Line Mux with modem control
+
+ M7248 U Unibus repeater BBSY
+
+ M7249 CD11 U Hollerith Check (Multiple ones error detector)
+
+ M725 KA11 U 11/20 bus interface and IR module
+
+ M7251 KG11-A U Network interface XOR and CRC block check option
+
+ M7253 U 11 to Lear Siegler 7700 terminal
+
+ M7254 RK11-D U RK05 status control module
+
+ M7255 RK11-D U RK05 disk control module
+
+ M7255-YA U Modified M7255 for Diablo series 30 disk drives
+
+ M7256 RK11-D U RK05 registers module (data path)
+
+ M7257 RK11-D U RK05 bus control module
+
+ M7258 LP11 U Printer controller (Dataproducts interface)
+
+ M7259 MF11-LP U Parity for MF11-LP
+
+ M726 KA11 U 11/20 IR decode module
+
+ M726-YA KH11-A U M726 for KH11-A
+
+ M7260 KD11-B U 11/05 data paths module
+
+
+ M7261 KD11-B U 11/05 control logic module
+
+ M7263 KD11-D U 11/04 processor module
+
+ M7264 KD11-F Q 11/03 processor with 4-Kword MOS RAM
+ M7264 Caution: uses DC1, DB1, DE1, DF1 for purposes
+ M7264 other than BDAL18-21
+ M7264 Refs: EB-18451-20, MP-00049, MP-00050, MP-00264, MP-00357
+ M7264 Refs: MP-00589, EK-LSI11-MC
+
+ M7264-AA KD11-F Q 11/03 processor with 4-Kword MOS RAM
+ M7264-AA Refs: EB-18451-20, MP-00049, MP-00050, MP-00264, MP-00357
+ M7264-AA Refs: MP-00589, EK-LSI11-MC
+
+ M7264-AB KD11-F Q 11/03 processor with 4-Kword MOS RAM
+ M7264-AB Refs: EB-18451-20, MP-00049, MP-00050, MP-00264, MP-00357
+ M7264-AB Refs: MP-00589, EK-LSI11-MC
+
+ M7264-BB KD11-F Q 11/03 processor with 4-Kword MOS RAM
+ M7264-BB with DIBOL microm
+ M7264-BB Refs: EB-18451-20, MP-00049, MP-00050, MP-00264, MP-00357
+ M7264-BB Refs: MP-00589, EK-LSI11-MC
+
+ M7264-CB KD11-F Q 11/03 processor with 4-Kword MOS RAM
+ M7264-CB Refs: EB-18451-20, MP-00049, MP-00050, MP-00264, MP-00357
+ M7264-CB Refs: MP-00589, EK-LSI11-MC
+
+ M7264-DB KD11-F Q 11/03 processor with 4-Kword MOS RAM
+ M7264-DB Refs: EB-18451-20, MP-00049, MP-00050, MP-00264, MP-00357
+ M7264-DB Refs: MP-00589, EK-LSI11-MC
+
+ M7264-EB KD11-F Q 11/03 processor with 4-Kword MOS RAM
+ M7264-EB Refs: EB-18451-20, MP-00049, MP-00050, MP-00264, MP-00357
+ M7264-EB Refs: MP-00589, EK-LSI11-MC
+
+ M7264-FB KD11-F Q 11/03 processor with 4-Kword MOS RAM
+ M7264-FB Refs: EB-18451-20, MP-00049, MP-00050, MP-00264, MP-00357
+ M7264-FB Refs: MP-00589, EK-LSI11-MC
+
+ M7264-HB KD11-F Q 11/03 processor with 4-Kword MOS RAM
+ M7264-HB Refs: EB-18451-20, MP-00049, MP-00050, MP-00264, MP-00357
+ M7264-HB Refs: MP-00589, EK-LSI11-MC
+
+ M7264-JB KD11-F Q 11/03 processor with 4-Kword MOS RAM
+ M7264-JB Refs: EB-18451-20, MP-00049, MP-00050, MP-00264, MP-00357
+ M7264-JB Refs: MP-00589, EK-LSI11-MC
+
+ M7264-YA KD11-H Q 11/03 processor with 0-Kword RAM
+ M7264-YA (To be replaced by M7264-YC)
+ M7264-YA Caution: uses DC1, DB1, DE1, DF1 for purposes
+ M7264-YA other than BDAL18-21
+ M7264-YA Refs: EB-18451-20, MP-00049, MP-00050, MP-00264, MP-00357
+ M7264-YA Refs: MP-00589, EK-LSI11-MC
+
+ M7264-YB KD11-Q Q 11/03 processor with 0-Kword RAM & DIBOL microm
+ M7264-YB Refs: EB-18451-20, MP-00049, MP-00050, MP-00264, MP-00357
+ M7264-YB Refs: MP-00589, EK-LSI11-MC
+
+ M7264-YC KD11-H Q 11/03 processor with 0-Kword RAM
+ M7264-YC (Revision F or later)
+ M7264-YC Refs: EB-18451-20, MP-00049, MP-00050, MP-00264, MP-00357
+ M7264-YC Refs: MP-00589, EK-LSI11-MC
+
+ M7265 KD11-E U 11/34 data paths module (replaced by M8265)
+
+ M7266 KD11-E U 11/34 control module (replaced by M8266)
+
+ M7268 RKV11 Q RK11-D to Qbus adapter
+ M7268 Refs: EK-RKV11-OP, EK-RKV11-TM, MP-00223, EB-20175-20
+
+ M7269 RKV11-D Q RK05 controller (16-bit DMA only)
+ M7269 Refs: EK-RKV11-OP, EK-RKV11-TM, MP-00223, EB-20175-20
+
+ M727 KA11 U 11/20 State control module
+
+ M727-YA KH11-A U M727 for KH11-A
+
+ M7270 KD11-HA Q LSI-11/2 CPU, 16-bit
+ M7270 Caution: uses BC1, BD1, BE1, BF1 for purposes
+ M7270 other than BDAL18-21
+ M7270 Refs: MP-00563
+
+ M7275 U BRPE 11 punch interface
+
+ M7276 U Trend reader interface
+
+ M7277 DH11 U DH11 Transmit scanner and NPR
+
+ M7278 DH11 U DH11 Registers and byte count
+
+ M7279 DH11 U DH11 FIFO buffer
+
+ M728 KA11 U 11/20 Timing and states module
+
+ M728-YA KH11-A U M728 for KH11-A
+
+ M7280 U 8 UARTS on quad-height board
+
+ M7281 CB11-DA U Unibus to 32 point relay distributor module
+
+ M7282 CB11-SB U Unibus to 64 point input scan
+
+ M7283 DA11-F U Window data path board
+
+ M7284 DA11-F U Window control
+
+ M7285 DJ11 U MUX control board
+
+ M7285-YA DJ11 U M7285 W baud rate of 50
+
+ M7285-YB DJ11 U M7285 W baud rate of 100
+
+ M7286 FK11 U FK11 Interface, VT20
+
+ M7288 DH11 U Line parameters control
+
+ M7289 DH11 U Receiver scanner
+
+ M7291 CB11-HA U 16 point input interrupt
+
+ M7292 U TU60 interface
+
+ M7293 MM11-U/UP U Timing and control
+
+ M7294 RH11 U MASSBUS data buffer and control
+
+ M7294-YA RH11-C U Modified M7294 for RH11-C
+
+ M7295 RH11-A U MASSBUS bus control
+
+ M7295-YA RH11-B U Modified M7295 with independent NED timeout for
+ M7295-YA RH11-B
+
+ M7296 RH11 U MASSBUS control and status registers
+
+ M7297 RH11 U MASSBUS parity control
+
+ M7298 U 11/40 watchdog timer with restart and crystal clock
+
+ M7341 U Microprocessor Series (MPS) Processor Module
+
+ M7344-YA U Microprocessors Series (MPS) 1K Read/Write Memory Module
+
+ M7344-YB U Microprocessors Series (MPS) 2K Read/Write Memory Module
+
+ M7344-YC U Microprocessors Series (MPS) 4K Read/Write Memory Module
+
+ M7345 U Microprocessors Series (MPS)Programmable Read-Only Memory Module
+
+ M7346 U Microprocessors Series (MPS)External Event Detection Module
+
+ M7349 ML11 U ML11 indicator board, status LEDs + on/off switch
+
+ M7350 RT02 - RT02-C, -D, -E badge reader
+
+ M7351 TM04-AA U Massbus control
+
+ M7352 TM04-AA U Tape control for STC 1935 formatter and 1921 drive
+
+ M7355 U 4 Megabit bubble array, Intel 7110
+
+ M7357-AB ML11-A U 256 Kb array, mostly good Mostek 16K chips
+
+ M7357-AC ML11-A U 256 Kb array, mostly good National 16K chips
+
+ M7357-AE ML11-A U 256 Kb array, mostly good TI 16K chips
+
+ M7358-AE ML11-B U 1 Mb array, mostly good TI 64K chips
+
+ M7358-AF ML11-B U 1 Mb array, mostly good Hitachi 64K chips
+
+ M7358-AH ML11-B U 1 Mb array, mostly good NEC 64K chips
+
+ M7359 DRV11-S Q EIA/RS408 8 bit parallel I/O interface
+
+ M7360 ADC11,ADA11 U Controller, hex, two slots thick
+
+ M7361 ML11 U Asynchronous control
+
+ M7362 ML11 U Synchronous control
+
+ M7363 ML11 U ML11 array data
+
+ M7386 VTV30-K Q VT30 Interface (Character serial input/output)
+
+ M7452 U UNIBUS to Fiber Optic C
+
+ M7454 TU80K-CP U TU80 interface (Dilog/Digital)
+
+ M7455 TSU05 U TSU05 controller
+
+ M7458-AA MSV11-RA Q 1-Mbyte PMI/Q22 parity memory with CSR
+ M7458-AA (Also M7458-AC, -AH, -AJ)
+
+ M7460 KA785 SBL, LOW BITS INTER.
+
+ M7461 KA785 SBH, HIGH BITS INTER.
+
+ M7462 KA785 CAM, CACHE ADD MATRIX
+
+ M7463 KA785 CDM, CACHE DATA MATRIX
+
+ M7464 KA785 TBM, CPU TRANSLATION BUF
+
+ M7465 KA785 IDP, CPU INSTR DATA PATH
+
+ M7466 KA785 IRC, CPU INSTRUCT DECODE
+
+ M7467 KA785 DBP, CPU DATA PATH "B"
+
+ M7468 KA785 DEP, CPU DATA PATH "E"
+
+ M7468-YA KA785 DEP, DATAPATH MODULE,16-31 BIT
+
+ M7469 KA785 DDP, CPU DATA PATH "D"
+
+ M7469-YA KA785 DDP, DATAPATH MODULE,08-15 BIT
+
+ M7470 KA785 DCP, CPU DATA PATH
+
+ M7470-YA KA785 DCP, DATAPATH MODULE,00-07 BIT
+
+ M7471 KA785 DAP, CPU DATA PATH "A"
+
+ M7471-YA KA785 DAP, DATAPATH CONTROL MODULE
+
+ M7472 KA785 CEH, COND CODES HIGH BIT
+
+ M7473 KA785 ICL, INTR.CONT.LOW BITS
+
+ M7474 KA785 CLK, CPU CLOCK
+
+ M7475 KA785 JCS, JOINT CONT.STORE
+
+ M7476 KA785 USC, MICRO SEQUENCER
+
+ M7477 KA785 CIB CPU CONSOLE INTR
+
+ M7478 KA620 Q RTVAX, 1 Mbyte, FP, TPU clock, boot/diag ROM
+
+ M7478-AA KA785 Q 32 BIT SBC W/1MB, FLT. POINT
+
+ M7484 U FEPCM Unibus bridge module
+
+
+ M7485 UDA50-A U UNIBUS to radial disk interface PR board
+ M7485 with no ROMs (SDI disk controller)
+
+ M7485-YA UDA50-A U UNIBUS to radial disk interface PR board
+ M7485-YA with blasted ROMs
+
+ M7486 UDA52 U Controller for SDI disk drives (UDA SI)
+
+ M7488 U UNIBUS graphics workstation
+ M7488 (Graphics display processor)
+
+ M7490 RRD50 U UNIBUS control for RRD50
+
+ M7490-YA RRD50 U UNIBUS control for RRD50 with encryption support
+
+ M7493-PA R440F Q R449F (S-box) to SCSI Converter
+
+ M7500 KMV1A-M Q Programmable Communications Controller
+ M7500 Refs: EK-KMV1A-TM, EK-KMV1A-UG, MP-01173, AA-HN43B-TN
+ M7500 Refs: ZJ360-PY
+
+ M7500-Px KMV1A-Sx Q Programmable Communications Controller
+ M7500-Px (for BA200 series enclosures)
+ M7500-Px -PA, -SF RS232
+ M7500-Px -PB, -SG RS422
+ M7500-Px -PC, -SH RS423
+ M7500-Px Refs: EK-KMV1A-TM, EK-KMV1A-UG, MP-01173, AA-HN43B-TN
+ M7500-Px Refs: ZJ360-PY
+
+ M7501 KMV2A-S Q Programmable comms controller, dual line.
+
+ M7502 Q Single-line high speed intelligent communication
+ M7502 interface
+
+ M7504 DEQNA-M Q Qbus to ethernet adapter, Q22, obsolete
+ M7504 for VMS 5.x and above (use DELQA).
+ M7504 Refs: MP-01369, EK-H4000-TM, AA-K759A-TK, EK-DEQNA-UG
+ M7504 Refs: EB-22714-18
+
+ M7504-PA DEQNA-S Q Qbus to ethernet adapter, Q22, obsolete
+ M7504-PA for VMS 5.x and above (use DELQA).
+ M7504-PA (for BA200 series)
+ M7504-PA Refs: MP-01369, EK-H4000-TM, AA-K759A-TK, EK-DEQNA-UG
+ M7504-PA Refs: EB-22714-18
+
+ M7505 BTR01 Q Conditioning module for BTR interface
+
+ M7506-AA MSV11-MA Q 512-Kbyte 18-bit RAM
+ M7506-AA (Also M7506-AC, -AE, -AF, -AH, -AP)
+ M7506-AA Refs: EK-MSV1M-UG, MP-02053, uNOTE N#028
+
+ M7506-AT MSV11-MA Q 512-kbyte 22-bit parity/CSR MOS RAM
+ M7506-AT (Also M7506-AU, -AV)
+ M7506-AT Refs: EK-MSV1M-UG, MP-02053, uNOTE N#028
+
+ M7506-BA MSV11-MB Q 1-Mbyte RAM
+ M7506-BA Refs: EK-MSV1M-UG, MP-02053, uNOTE N#028
+
+ M7506-BC MSV11-MB Q 1-Mbyte RAM
+ M7506-BC Refs: EK-MSV1M-UG, MP-02053, uNOTE N#028
+
+ M7506-BE MSV11-MB Q 1-Mbyte 22-bit parity/CSR MOS RAM
+ M7506-BE Refs: EK-MSV1M-UG, MP-02053, uNOTE N#028
+
+ M7506-BF MSV11-MB Q 1-Mbyte RAM
+ M7506-BF Refs: EK-MSV1M-UG, MP-02053, uNOTE N#028
+
+ M7506-BH MSV11-MB Q 1-Mbyte RAM
+ M7506-BH Refs: EK-MSV1M-UG, MP-02053, uNOTE N#028
+
+ M7506-BP MSV11-MB Q 1-Mbyte RAM
+ M7506-BP Refs: EK-MSV1M-UG, MP-02053, uNOTE N#028
+
+ M7506-BT MSV11-MB Q 1-Mbyte 22-bit parity/CSR MOS RAM
+ M7506-BT Refs: EK-MSV1M-UG, MP-02053, uNOTE N#028
+
+ M7506-BU MSV11-MB Q 1-Mbyte 22-bit parity/CSR MOS RAM
+ M7506-BU Refs: EK-MSV1M-UG, MP-02053, uNOTE N#028
+
+ M7506-BV MSV11-MB Q 1-Mbyte 22-bit parity/CSR MOS RAM
+ M7506-BV Refs: EK-MSV1M-UG, MP-02053, uNOTE N#028
+
+ M7507 LNV11 Q Simplex 2.5MB full page bitmap memory
+
+ M7507-YA LNV11 Q Duplex 2.5MB full page bitmap memory
+
+ M7508 LNV11-A Q 29116 image generator processor (IGP)
+
+ M7509 LNV11-A Q Q-bus/print engine interface (QPIO)
+
+ M7510 LNV11-A Q Horiz line proc, 256kB font RAM (HLP)
+
+ M7511 LNV11-A Q Horiz line proc, 512kB font RAM (HLP)
+
+ M7512 RQDX1E Q RQDX extender for RQDX1; must be the last item in
+ M7512 the backplane, below the RQDX1.
+
+ M7513 RQDXE Q RQDX extender for RQDX2/3
+ M7513 (-AA for BA23, -FA for BA123).
+ M7513 Refs: EK-RQDXE-UG
+
+ M7514 BTRXX-A Q DC/DC Converter module
+
+ M7515 Q 3-plane bitmap video generator for Q-bus
+
+ M7516 DELQA-M Q Ethernet interface (replaces DEQNA)
+ M7516 Refs: EK-DELQA-UG, EK-DELQA-IN
+
+ M7516-PA DELQA-S Q Qbus high-performance ethernet adapter, Q22
+ M7516-PA (for BA200 series) (DEQTA)
+ M7516-PA Refs: EK-DELQA-UG, EK-DELQA-IN
+
+ M7516-YM DELQA-M Q Qbus to Ethernet Turbo Module, Q22
+ M7516-YM Refs: EK-DELQA-UG, EK-DELQA-IN
+
+ M7517 VSV90 Q VSV90 Q-bus graphics module
+
+ M7518 KEQDI-SA Q S-box control for internal RD's, 1 external RX
+
+ M7519-AA LNV11 Q Horiz line proc, 1 MB font RAN
+
+ M7521-AA DELUA-AA U UNIBUS to ethernet adapter
+ M7521-AA (Also M7521-AJ, -AP)
+
+ M7522 RUX50 U MSCP controller for RX50
+
+ M7523 LNV11 Q Duplex (QPIO) module
+
+ M7524 CMR53 Q Q-bus digital input, 32 points
+
+ M7525 CMR53 Q Q-bus digital output, 32 points
+
+ M7526 SS-LX56A-FA Q Digital/video controller
+
+ M7527 VSV22 Q Q-bus 1024*864 graphics control module
+
+ M7528 CMR53 Q High speed communications controller
+
+ M7529 CMR53 Q Medium speed communications controller to DRV11
+
+ M7531 DIV32-SA,F Q Q-bus ISDN BRA module for BA23/BA123
+
+ M7531-KK DIV32-SA,F Q Q-bus ISDN BRA module for BA200 series, Australia
+
+ M7531-PA DIV32-SA,F Q Q-bus ISDN BRA module for BA200 series
+
+ M7545 U Intelligent I/O controller
+
+ M7534 DEFQA Q QBus to FDDI Interface
+
+ M7540 FP785 FLOAT PT FRACT NORMALIZ
+
+ M7541 FP785 FMH, FLOAT PT FRACT MULT
+
+ M7542 FP785 FML, FLOAT PT FRACT MULT
+
+ M7543 FP785 FAD, FLOAT PT FRAC ADDER
+
+ M7544 FP785 FCT, FLOAT PT ACC CONTRL
+
+ M7546 TQK50-AA Q TMSCP controller for TK50 tape unit
+ M7546 Refs: uNOTE N#041
+
+ M7547 TUK50-AA U TMSCP controller for TK50 tape unit
+
+ M7549 Q Alternate buffer DMA interface for Q22 bus
+
+ M7551-AA MSV11-QA Q 1-Mbyte 22-bit parity/CSR MOS RAM
+ M7551-AA (Also M7551-AC, -AE, -AF, -AH, -AJ, -AP)
+ M7551-AA Refs: EK-MSV1Q-UG, MP-01931, ZJ246-RZ, uNOTE N#031
+
+ M7551-BA MSV11-QB Q 2-Mbyte 22-bit parity/CSR MOS RAM
+ M7551-BA (Also M7551-BC, -BE, -BF, -BH, -BJ, -BP, -BT, -BV)
+ M7551-BA Refs: EK-MSV1Q-UG, MP-01931, ZJ246-RZ, uNOTE N#031
+
+ M7551-CA MSV11-QC Q 4-Mbyte 22-bit parity/CSR MOS RAM
+ M7551-CA (Also M7551-CC, -CE, -CF, -CH, -CP, -CT, -CV)
+ M7551-CA Refs: EK-MSV1Q-UG, MP-01931, ZJ246-RZ, uNOTE N#031
+
+ M7552 KRP50 Q RRD40-HB/-HD/RRD50 Optical Disk Controller Module
+ M7552 (also KRQ50-AA, KRQ50-SA, KRQ50-SF)
+ M7552 Refs: EK-RRD50-UG, EK-RRD50-PS
+
+ M7553 Q QBus Console Module (link to mainframe VAX)
+
+ M7554 KDJ11-DA Q J11 CPU 15MHz, 512-Kbyte RAM, 2 SLUs, LTC
+ M7554 Refs: EK-KDJ1D-UG
+
+ M7554-01 KDJ11-DA Q J11 CPU 15MHz, 512-Kbyte RAM, 2 SLUs, LTC (VE)
+ M7554-01 Refs: EK-KDJ1D-UG
+
+ M7554-02 KDJ11-DB Q 11/53-PLUS CPU
+ M7554-02 (J11 15MHz, 1.5-Mbyte RAM, 2 SLU, LTC)
+ M7554-02 Refs: EK-KDJ1D-UG
+
+ M7554-04 KDJ11-DD Q J11 CPU 18MHz, 1.5-Mbyte RAM, 2 SLUs (CSS)
+ M7554-04 Refs: EK-KDJ1D-UG
+
+ M7554-PA KDJ11-SA Q J11 CPU 15MHz, 512-Kbyte RAM, 2 SLUs
+ M7554-PA with S-box handle
+ M7554-PA Refs: EK-KDJ1D-UG
+
+ M7554-PB KDJ11-SB Q J11 CPU 18MHz, 512-Kbyte RAM, 2 SLUs, LAT PROM,
+ M7554-PB with S-box handle
+ M7554-PB Refs: EK-KDJ1D-UG
+
+ M7554-PC CMR53-AA Q J11 CPU 18MHz, 512-Kbyte RAM, 2 SLUs
+ M7554-PC with S-box handle, CMR53 boot PROM
+ M7554-PC Refs: EK-KDJ1D-UG
+
+ M7554-SA KDJ11-SA Q J11 CPU 15MHz, 512-Kbyte RAM, 2 SLUs
+ M7554-SA with S-box handle (VE)
+ M7554-SA Refs: EK-KDJ1D-UG
+
+ M7554-SC KDJ11-SC Q J11 CPU 15MHz, 512-Kbyte RAM, 2 SLUs
+ M7554-SC with S-box handle (VE)
+ M7554-SC Refs: EK-KDJ1D-UG
+
+ M7554-SD KDJ11-SD Q J11 CPU 18MHz, 1.5-Mbyte RAM, LAT ROM
+ M7554-SD with S-box handle
+ M7554-SD Refs: EK-KDJ1D-UG
+
+ M7554-SE KDJ11-SE Q J11 CPU 18MHz, 1.5-Mbyte RAM, 2 SLUs, LTC,
+ M7554-SE with S-box handle
+ M7554-SE Refs: EK-KDJ1D-UG
+
+ M7554-YA KDJ11-SA Q J11 CPU 15MHz, 512-Kbyte RAM, 2 SLUs, LTC,
+ M7554-YA no handle
+ M7554-YA Refs: EK-KDJ1D-UG
+
+ M7554-YB KDJ11-SB Q J11 CPU 15MHz, 512-Kbyte RAM, 2 SLUs, LAT PROMs,
+ M7554-YB no handle
+ M7554-YB Refs: EK-KDJ1D-UG
+
+ M7555 RQDX3 Q MFM Winchester and floppy disk controller
+ M7555 (RX50/RX33/RD50-54/RD31/RD32/RD33)
+ M7555 Refs: EK-RQDX3-UG, uNOTEs N#041, N#043
+
+ M7555-YA RQDX3-SD Q Controller for RX33D 48TPI floppy disk drive
+
+ M7556 U Mininum load module +5V 1A -15V 375mA, 11/84
+
+ M7558 MSV11 Q 2-Mbyte 22-bit MOS memory
+
+ M7558-AA MSV11-SA Q 2-Mbyte 22-bit parity/CSR MOS RAM
+ M7558-AA (Also M7558-AC, -AE, -AF, -AL, -AP, -AR, -AU, -AV)
+
+ M7559 TQK70 Q TMSCP controller for TK70
+
+ M7573 RQDX4 Q Controller for RX35, RD50/1/2/3/4
+
+ M7602 VCB01, QVSS Q Qbus Video Sub System module for Q22 systems
+ M7602 (uVAX I, II)
+
+ M7602-YA VCB01, QVSS Q Qbus Video Sub System module, bitmap graphics
+ M7602-YA option. (uVAX I, II)
+
+ M7605 TQK25 Q 0.25" streaming tape drive controller (TK25)
+ M7605 Refs: uNOTE N#041
+
+ M7606-AA KA630-AA Q MicroVAX II CPU w/1-Mbyte, floating point, time of
+ M7606-AA year clock, boot/diagnostic ROM, Q22
+ M7606-AA (Also M7606-AC, -AF, -AH, -AL, -AP, -AS
+ M7606-AA Also M7606-EC, -EE, -EF, -EP, -ES, -ET, -EU, -EV
+ M7606-AA Also M7606-ZC, -ZF, -ZP, -ZS)
+ M7606-AA Refs: EK-KA630-UG, EK-KD32-OM, EK-KD32A-OM
+ M7606-AA Refs: uNOTEs N#022, N#024, N#026
+
+ M7606-AB KA630-AB Q MicroVAX II CPU, floating point.
+
+ M7607-AA MS630-AA Q 1-Mbyte RAM for MicroVAX II
+ M7607-AA (Also M7607-AC, -AE, -AH, -AL, -AP, -AR, -AS, -AT,
+ M7607-AA -AU, -AV, -ZC, -ZF, -ZS)
+
+ M7608-AA MS630-BA Q 2-Mbyte RAM for KA630 (MicroVAX II)
+ M7608-AA (Also M7608-AC, -AE, -AH, -AL, -AP, -AR, -AS, -AT,
+ M7608-AA -AU, -AV)
+
+ M7608-BA MS630-BB Q 4-Mbyte RAM for KA630 (MicroVAX II)
+ M7608-BA (Also M7608-BC, -BE, -BH, -BL, -BP, -BR, -BS, -BT,
+ M7608-BA -BU, -BV, -YC, -YF, -YS, -ZC, -ZF, -ZS)
+
+ M7609-AA MS630-CA Q 8-Mbyte parity 36-bit RAM for KA630 (MicroVAX II)
+ M7609-AA (Also M7609-AC, -AF, -AH, -AP, -AV) (Q22 via CD)
+
+ M7616 KXJ11-CA Q J11 CPU, 512-Kbyte RAM, 64-Kbyte PROM
+ M7616 (Q22 peripheral processor)
+
+ M7620 KA650-AA/BA Q MicroVAX III CPU (-AA full license, -BA
+ M7620 workstation license), 90nS.
+ M7620 Refs: EK-KA650-UG
+
+ M7621 MS650-AA Q 8-Mbyte RAM for KA650 (MicroVAX III)
+
+ M7622 MS650-BA Q 16-Mbyte RAM for KA650 (MicroVAX III)
+
+ M7624 KA640-AA Q MicroVAX 3300/3400 CPU: CVAX chip, Ethernet,
+ M7624 DSSI, 4 Mbyte memory (640QR)
+ *** 640QR
+
+ M7625 KA655-BA Q MicroVAX III CPU (workstation license), 60nS
+
+ M7626 KA660 Q VAX 4000 CPU, 57MHz, Q22, DSSI, ethernet
+
+ M7634-PA IEQ11 Q IEEE interface
+
+ M7635-AA KN210 Q DS5400, RISC 3000 CPU, Qbus interface
+
+ M7635-AB KN210 Q M7635-AA with LSI R3000, R3020 chips
+
+ M7635-AC KN210 Q M7635-AA with PERF R3000, R3020 chips
+
+ M7636 Q I/O Module, DSSI Interface, Ethernet
+
+ M7637 KN220 Q DS5500 CPU Module, Memory Control, 64Kb
+ M7637 I&D Caches
+
+ M7638 Q DS5500 I/O MOD @25MHZ W/QBUS,DSSI,SC
+
+ M7639 MS220 Q DS 5500 64MB ECC MEM ARRAY
+
+ M7651 DRV11-WA Q 18/22-bit DMA general purpose parallel interface
+ M7651 Refs: EK-DRVWA-UG, MP-01582, ZJ244-RZ, uNOTE N#041
+
+ M7651-PA DRV1W-S Q General-Purpose DMA Interface
+ M7651-PA (for BA200 series)
+ M7651-PA Refs: EK-DRVWA-UG, MP-01582, ZJ244-RZ, uNOTE N#041
+
+ M7651-YB DRV11-WA Q M7651, revision C circuit
+ M7651-YB Refs: EK-DRVWA-UG, MP-01582, ZJ244-RZ, uNOTE N#041
+
+ M7656 VSV21-AA Q Colour graphics module: M68K processor, HD63486
+ M7656 video processor (512x512 or 512x256 resolution),
+ M7656 Serial ports for mouse, trackball, console and
+ M7656 LK201.
+
+ M7658 DRQ3B-A Q 2 x 16 bit, High-Speed, bidirectional Parallel
+ M7658 interface w/DMA and Block Mode
+ M7658 Refs: EK-O47AA-UG
+
+ M7658-PA DRQ3B-S Q High-Speed, Parallel Interface
+ M7658-PA (for BA200 series)
+ M7658-PA Refs: EK-O47AA-UG
+
+ M7676 KXT11-AB Q Single-board 16-bit CPU (dual height).
+ M7676 16-Kbytes of static RAM
+ M7676 64-Kbytes of direct addressing capability
+ M7676 PDP-11 base level instruction set
+ M7676 50, 60 or 800Hz realtime clock
+ M7676 24-line parallel I/O
+ M7676 Two async serial I/O ports
+ M7676 Four 28-pin memory sockets for up to 16-Kbytes of
+ M7676 additional RAM and 16-Kbytes of ROM, or an extra
+ M7676 32-Kbytes of RAM or 32-Kbytes of ROM.
+ M7676 (T11 processor) (FALCON-PLUS) (SBC-11/21-PLUS)
+ M7676 Refs: EK-SBC02-CG, EK-SBC02-UG, EK-SBCOP-IN, uNOTE N#015
+
+ M7677 MDM U 11/84 monitor and distribution monitor
+
+ M7677-YA MDM(?) U 11/84-A monitor (fan, blower, I/O distribution)
+
+ M7679 ISDN Q ISDN basic rate access Qbus board
+
+ M7680 RK05 RK05
+
+ M7681 RK05 CYLINDER ADDRESS + TRACK DIFF
+
+ M7684 RK05 CONTROL SEQUENCER
+
+ M7685 ???????? ? Data Sequencer for RM02/03, can be replaced
+ M7685 by M8685
+
+ M7686 ???????? ? RM02/03 Control Interface
+
+ M7687 ???????? ? ???
+
+ M7690 VTV31-KA Q? RGB Bitmap 348Hx256V 50Hz
+
+ M7691 VTV31-KB Q? RGB Bitmap 348Hx240V 60Hz
+
+ M7693 VTV31-KD Q? RGB Bitmap 512Hx240V 60Hz
+
+ M7700 RK05 RK05 unit-sel/photoamp/sector-counter
+ M7700 (Replaced by M7680)
+
+ M7701 DEC PAK CONTROL & INTERLOCK
+
+ M7705 RK06 RK06 MODULE
+
+ M7706 RK06 RK06 MODULE
+
+ M7707 RK06 RK06 SERVO CONTROL,QUAD
+
+ M7708 RK06 RK06 TRACK POSITION DETECTOR
+
+ M7726 RX01 - 8" floppy disk controller (internal board)
+
+ M7727 RX01 - 8" floppy disk read/write (internal board)
+
+ M7728-YC - M7728 ETCH REV L AND LATER
+
+ M7729 RK06 - RK06,SERVO ANALOG,(REPLACES M
+
+ M7730 RK06 - RK06 DUCIL PORT LOGIC BOARD
+
+ M7736 LA36 - LA36 HT VT TOF OPTION,DOUBLE
+
+ M7740 RQC25 Q Qbus to LESI bus adapter used on disks with
+ M7740 MSCP. RC25 controller. Replaces M8654. Q22.
+ M7740 (Also M7740-01, -PA) (Also called KLESI-QA and
+ M7740 used as the controller for a TU81-Plus)
+ M7740 Refs: EK-ORC25-PS, EK-ORC25-UG, MP-01612, ZJ350-RZ
+ M7740 Refs: uNOTE N#041
+
+ M7744 RX02 - 8" floppy disk controller (internal board)
+ M7744 Refs: MP-00629
+
+ M7745 RX02 - 8" floppy disk read/write (internal board)
+ M7745 Refs: MP-00629
+
+ M7760 TU60 - Cassette logic (internal board)
+
+ M7761 TU60 - Cassette servo and read (internal board)
+
+ M7762 RL11 U RL01/02 disk controller
+ M7762 Refs: MP-00153
+
+ M7769 KFQSA-A Q Storage Adapter (DSSI Disk Interface), BA23
+ M7769 Refs: EK-KFQSA-IN
+
+ M7769 KFQSA-B Q Storage Adapter (DSSI Disk Interface), BA123
+ M7769 Refs: EK-KFQSA-IN
+
+ M7769 KFQSA-S Q Storage Adapter (DSSI Disk Interface), BA200 series
+ M7769 Refs: EK-KFQSA-IN
+
+ M7773 RP04 ASYNCHRONOUS LOGIC
+
+ M7774 RP04 REGISTER LOGIC
+
+ M7776 RP04 ERROR CORRECTION LOGIC, 4
+
+ M7786 RP05/06 SEEK SEARCH CONT
+
+ M7787 RP05/06 INTERFACE CONTROL
+
+ M7788 RP05/06 MINIMUM DEVICE LEVEL I
+
+ M7789 RP05/06 INTERFACE RECEIVER
+
+ M7792 DEUNA U DEUNA port module, UNIBUS to ethernet
+ M7792 microprocessor. (1 of 2)
+
+ M7793 DEUNA U DEUNA link module, M7792 to ethernet bus
+ M7793 line unit. (2 of 2)
+
+ M780 KL11 U Teletype transmitter & receiver for KL11, 110 baud
+
+ M780-YB KL11 U 150 baud M780
+
+ M780-YC KL11 U 300 baud M780
+
+ M780-YD KL11 U 600 baud M780
+
+ M780-YE KL11 U 1200 baud send, 110 baud receive M780
+
+ M780-YF KL11 U 2400 baud M780
+
+ M780-YH KL11 U Used in PMK02-C option
+
+ M780-YS KL11 U 307-Kbaud M780 for KL11-S Tektronix 4010 series
+ M780-YS terminals.
+
+ M7800 DL11 U Async transmitter & receiver, 110-2400 baud,
+ M7800 no clock (Replaces KL11, which consisted of M780,
+ M7800 M105, M782)
+ M7800 Refs: uNOTE N#033
+
+ M7800-YA DL11 U M7800 without EIA chips, current loop only
+ M7800-YA Refs: uNOTE N#033
+
+ M7800-YB DL11 U M7800 with 24.6-Kbaud
+ M7800-YB Refs: uNOTE N#033
+
+ M7800-YC DL11 U M7800 with filter on ring circuit for use with
+ M7800-YC EMI filter cable
+ M7800-YC Refs: uNOTE N#033
+
+ M7801 MC11 U Data word control for MC11 (-YA is for MC11-B)
+
+ M7802 MC11 U Address control for MC11 (-YA is for MC11-B)
+
+ M7803 MC11 U Arbitration control for MC11
+
+ M7803-YA MC11 U Arbitration control with parity for MC11
+
+ M7803-YB MC11 U High speed M7803-YA, will be replaced by M7869
+
+ M7807 DV11 U Bus control and MUX for DV11
+ M7807 (fits in DV11 backplane)
+
+ M7808 DV11 U Modem control scan and MUX for DV11
+ M7808 (fits in DV11 backplane)
+
+ M7809 AR11 U 16 Channel 10 bit A/D, 1 ch D/A
+
+ M781 PC11 U PC11 control board for KA11
+ M781 (Requires M105 and M782 or M7820 or M7821)
+
+ M7810 PC11 U Paper tape reader/punch controller
+
+ M7812 DQ11-AA U Bus selectors, CSRs, shift registers
+
+ M7813 DQ11-AA U Character count, bus address, shift control
+
+ M7814 DZ11-C U 8-line 20mA data MUX, 50 to 100-Kbaud
+ M7814 (also DZ11-D, DZ11-F)
+ M7814 Refs: EK-DZ110-OP, MP-00253
+
+ M7815 DQ11-AA U Modem control (DQ11-BA)
+
+ M7816 DQ11-AB U Bus selectors and block check
+
+ M7817 DQ11-AB U Character detection and sequence control(DQ11-BB)
+
+ M7818 DQ11-AA U Hardwired char detection and NPR control
+
+
+ M7819 DZ11-A U 8-line double-buffered async EIA
+ M7819 with modem control (50 to 96-Kbaud, 64-byte silo)
+ M7819 (also DZ11-B, DZ11-E)
+ M7819 Refs: EK-DZ110-OP, MP-00132
+
+ M782 KL11 U Interrupt control, 6-bits, 1 per PDP11 peripheral
+
+ M7820 KW11 U Interrupt control, 7-bits, 1 per PDP11 peripheral
+ M7820 (Replaced by M7821)
+
+ M7821 KW11 U Fast M7820
+
+ M7822 DU11 U Synchronous serial line interface. Max 9600
+ M7822 baud. Bell 200 series modems. Optional
+ M7822 DCF11-A clock available.
+
+ M7823 KW11-W U Watchdog timer module
+
+ M7824 CP11-UP U Punch interface, CP11-UP
+
+ M7826 DVS11 U Serial line xmit/receiver, sync, async, isosync
+
+ M7828 DT03 U Remote DT03 bus switch control
+
+ M783 U Bus transmitters 12 drivers, mixed logic
+
+ M7833 DV11 U Line card, 4 async lines for DV11
+ M7833 (fits in DV11 backplane)
+
+ M7835 DD11 U Tone alert used in DD11
+
+ M7836 DV11 U ALU and transfer bus for DV11
+ M7836 (fits in DV11 backplane)
+
+ M7837 DV11 U UNIBUS data and NPR control for DV11
+ M7837 (fits in DV11 backplane)
+
+ M7838 DV11 U ROM, RAM and branch for DV11
+ M7838 (fits in DV11 backplane)
+
+ M7839 DV11 U Line card, 4 async lines for DV11
+ M7839 (fits in DV11 backplane)
+
+ M784 U Bus receiver (16 receivers), single in/single out
+
+ M784-YA U M784, non-inverting
+
+ M7840 KE11-B U Extended Arithmetic Element, KE11-A Compatible
+
+ M7843 DR11-K U Digital I/O
+
+ M7843-YA DR11-K U M7843 with fusible resistor replaced by diode
+
+ M7845 U Time out for boeing interface
+
+ M7846 RX11 U RX01 floppy disk controller
+
+ M7847-AA MS11-E U Either M7847-BA, -CA, -DA or -EA
+
+ M7847-AB MS11-EP U Either M7847-BB, -CB, -DB or -EB
+
+ M7847-AD MS11-FP U Either M7847-BD, -CD, -DD or -ED
+
+ M7847-AJ MS11-JP U Either M7847-BJ, -CJ, -DJ or -EJ
+
+ M7847-BB MS11-EP U 4-Kword 18-bit RAM
+
+ M7847-BD MS11-FP U 8-Kword 18-bit RAM
+
+ M7847-BF MS11-HP U 12-Kword 18-bit RAM
+
+ M7847-BJ MS11-JP U 16-Kword 18-bit RAM
+
+ M7847-CB MS11-EP U 4-Kword 18-bit RAM
+
+ M7847-CD MS11-FP U 8-Kword 18-bit RAM
+
+ M7847-CJ MS11-JP U 16-Kword 18-bit RAM
+
+ M7847-DB MS11-EP U 4-Kword 18-bit RAM
+
+ M7847-DD MS11-FP U 8-Kword 18-bit RAM
+
+ M7847-DJ MS11-JP U 16-Kword 18-bit RAM
+
+ M7847-EB MS11-EP U 4-Kword 18-bit RAM
+
+ M7847-ED MS11-FP U 8-Kword 18-bit RAM
+
+ M7847-EE MS11-H U 12-Kword 16-bit RAM
+
+ M7847-EJ MS11-JP U 16-Kword 18-bit RAM
+
+ M7847-YA MS11-E U 4-Kword 16-bit RAM
+
+ M7847-YB MS11-EP U 4-Kword 18-bit RAM
+
+ M7847-YC MS11-F U 8-Kword 16-bit RAM
+
+ M7847-YD MS11-FP U 8-Kword 18-bit RAM
+
+ M7847-YE MS11-H U 12-Kword 16-bit RAM
+
+ M7847-YF MS11-HP U 12-Kword 18-bit RAM
+
+ M7847-YJ MS11-JP U 16-Kword 18-bit RAM
+
+ M785 U Bus transceiver, 8 drivers/8 receivers (8-bit)
+
+ M7850 MM11-BP/CP U Parity board for G651, MS11-EP/FP/HP/JP
+
+ M7855 U UNIBUS exercisor and tester
+
+ M7856 DL11-W U RS-232 SLU & realtime clock option
+ M7856 Refs: uNOTE N#033
+
+ M7856-YA DL11-W U M7856 with 110 to 19.2-Kbaud option
+ M7856-YA Refs: uNOTE N#033
+
+ M7857 DL11-L U SLU & realtime clock, option, with RS449 capability
+
+ M7859 KY11-LB U Console interface; programmer's console (11/34a)
+
+ M786 U Device Register Interface
+
+ M7860 DR11-C U M786+M105+M7821; general device interface to PDP11
+
+ M7864 DR11-L U DR11-L, 2 word unibus input interface
+
+ M7864-YA U M7864 modified for chrono-log clock interface
+
+ M7864-YB U M7864 modified for use with M5864 optical I/O
+ Converter
+
+ M7865 DR11-M U Two word unibus output interface
+
+ M7867 DUP11-DA U SDLC or DDCMP sync interface
+ M7867 Refs: EK-DUP11-MM, EP-DUP11-MM
+
+ M7869 MC11-B U Arbitration control (replaces M7803-YB)
+
+ M787 KW11-L U Line frequency clock
+
+ M7870 KU116 U 11/60 writable control store module
+
+ M7871 KD11-K U 11/60 diagnostic control store module
+
+ M7871-YA KD11-K U 11/60 extended control store module
+
+ M7872 KD11-K U 11/60 micro word module
+
+ M7873 KD11-K U 11/60 decode module
+
+ M7874 KD11-K U 11/60 data paths module
+
+ M7875 KD11-K U 11/60 cache kit (memory & MMU)
+
+ M7876 KD11-K U 11/60 timing module
+
+ M7877 KD11-K U 11/60 status module
+
+ M7878 FP11-E U 11/60 FNUA (Floating point Next micro Address)
+
+ M7879 FP11-E U 11/60 exponent module
+
+ M788 MR11-A U Control logic module
+
+ M7880 FP11-E U 11/60 FFP MULNET module
+
+ M7881 FP11-E U 11/60 FALU module (Floating point Arithmetic
+ M7881 Logic Unit)
+
+ M7883 CPI32 U 24 channel data mux, async
+
+ M7883-YA CPI32 U M7883 with async and sync
+
+ M7884 CPI32 U Unibus interface card, async
+
+ M7884-YA CPI32 U Unibus interface card, async and sync
+
+ M7890 DT03 U DT03 power sequence control
+
+ M7891-AH MS11-LA U 32-Kword 18-bit parity RAM (Also M7891-AL)
+
+ M7891-BA MS11-LB U 64-Kword 18-bit parity MOS memory
+ M7891-BA (Also M7891-BB, -BC, -BD, -BE, -BF, -BH, -BL)
+
+ M7891-CH MS11-LC U 96-Kword 18-bit parity RAM (Also M7891-CL)
+
+ M7891-DA MS11-LD U 128-Kword 18-bit parity MOS memory
+ M7891-DA (Also M7891-DB, -DC, -DD, -DE, -DF, -DH, -DL)
+
+ M7892 U M7292 with 8881 & 380 (TU60 interface)
+
+ M7893-YA DRS11 U 48 TTL outputs
+
+ M7893-YB DRS11 U 48 open collector outputs
+
+ M7893-YC DRS11 U M7893-YA with data strobe
+
+ M7894 DRS11 U 48 optical isolated outputs
+
+ M7895-YA DSS11 U 48 5V optical isolated inputs
+
+ M7895-YB DSS11 U 48 24V optical isolated inputs
+
+ M7895-YE DSS11 U DSS11-AB, 48 5V optical isolated inputs, fast
+
+ M7896-YA DSS11 U 48 24V contact sense inputs
+
+ M7897 PMK05 U Indicator board
+
+ M7899 DZ32 U DZ32 80line async mux modem control
+
+ M7900 RK611 U RK06/07 Unibus interface, hex
+
+ M7901 RK611 U RK06/07 register module, hex
+
+ M7902 RK611 U RK06/07 control module, hex
+
+ M7903 RK611 U RK06/07 data module, hex
+
+ M7904 RK611 U RK06/07 drive interface module, hex
+
+ M7906 RK07 U RK07 servo control
+
+ M7907 RK07 U RK07 servo analogue board
+
+ M7908 RK07 U RK07 track position detector/PLO
+
+ M7909 DZ32 U DZ32 attenuated loop back input tester
+
+ M791 U LA30 interface for PDP-11
+
+ M7910 U M791+M105+M7821, parallel interface between PDP-11
+ M7910 and LA30P.
+
+ M7911 TMB11 U TMB11 tape control 1
+
+ M7912 TMB11 U TMB11 tape control 2
+
+ M7914 DPQ11-A Q Synchronious line interface
+
+ M7915 IEC11-B U IEC11-B (IEEE interface) control
+
+ M7917 PTV11-PA PT02 Papertape reader interface
+
+ M792 U 32-word, 16-bit ROM diode matrix, all diodes in
+ M792 (used in DD11)
+
+ M792-YA U Papertape bootstrap loader for Teletype or
+ M792-YA high-speed papertape reader (PC11)
+
+ M792-YB U Disk/DECtape bootstrap loader
+
+ M792-YC U Card Reader bootstrap loader (CR11)
+
+ M792-YD MR11-DB U Bootstrap loader (11/45) (1 of 2)
+
+ M792-YE MR11-DB U Bootstrap loader (11/45) (2 of 2)
+
+ M792-YF U DS500 loader ROM
+
+ M792-YH U TA11 bootstrap loader
+
+ M792-YJ TM11 U Bell special TM11 loader
+
+ M792-YK U VT20 bootstrap
+
+ M792-YL U RX11 floppy loader
+
+ M7920 PC11-F U SPC controller for facit reader/punch
+
+ M7921 MA11-F U MA11-F data multiplexer
+
+ M7922 MA11-F U MA11-F address multiplexer
+
+ M7923 MA11-F U MA11-F multiplexer control
+
+ M7924 MA11-F U MA11-F unibus interface
+
+ M7928 DZV11 Q Sync serial line, with auto re-sync
+
+ M7929 U Milliken high speed data mirroring
+
+ M7930 LP11 U M793+M105+M7821, interface to Data Products line
+ M7930 printers
+
+ M7932 DRS11 U 48 channel output
+
+ M7933 DRS11-X U 48 channel output with output conditioning
+
+ M7934 DSS11 U 48 channel input
+
+ M7935 DSS11-X U 48 channel input with input conditioning
+
+ M7936 DV11 U Ors 2 DV11 on a TTL level and drives EIA or MIL188
+
+ M7937 MA11-KA U Programmable port control for MA11-F, MA11-H
+
+ M7939 DZS11-C U 8-line async mux, EIA I/O
+
+ M794 DC11-D U Modem interface & control card
+
+ M7940 DLV11 Q Serial Line Unit (SLU, Async)
+ M7940 Refs: MP-00055, EB-20175-20, uNOTE N#033
+
+ M7940-YA DLV11 Q M7940 with extra wires to bring out clock &
+ M7940-YA 110/300 speed change
+ M7940-YA Refs: MP-00055, EB-20175-20, uNOTE N#033
+
+ M7940-YC DLV11 Q Modified M7940 for use in a tester, TTL in/out
+ M7940-YC Refs: MP-00055, EB-20175-20, uNOTE N#033
+
+ M7940-YD DLV11 Q Modified M7940 for use in a tester, switchable
+ M7940-YD baud rate
+ M7940-YD Refs: MP-00055, EB-20175-20, uNOTE N#033
+
+ M7940-YE DLV11 Q Modified M7940 for use in a tester, XON/XOFF
+ M7940-YE Refs: MP-00055, EB-20175-20, uNOTE N#033
+
+ M7941 DRV11 Q 16-bit parallel line unit
+ M7941 Refs: EK-ADV11-OP, MP-00054, EB-20175-20, ZJ244-RZ
+ M7941 Refs: MP-00866 (unconfirmed)
+
+ M7942 MRV11-AA Q Space for 4K 16-bit PROM
+ M7942 Refs: MP-00066
+
+ M7942-YA MRV11-VA Q VT71T bootstrap
+
+ M7942-YB MRV11-AA Q M7942 with VT52 emulator, VT71 bootstrap
+
+ M7942-YC MRV11-VC Q VT72 bootstrap/diagnostic module
+
+ M7942-YD MRV11-AA Q M7942 with CSR11 bootstrap
+
+ M7944 MSV11-B Q 4-Kword 16-bit MOS RAM (external refresh)
+
+ M7946 RXV11 Q RX01 8" floppy disk controller
+ M7946 Refs: EK-RXV11-OP, MP-00024, EB-20175-20, ZF220-RZ
+
+ M7948 DRV11-P Q LSI-11 bus foundation module. Basic Qbus
+ M7948 interface board with space for wire-wrapping.
+ M7948 Refs: EK-DR11-OP, MP-00119, EB-20175-20
+
+ M7949 LAV11 Q LA180 line printer control module
+ M7949 Refs: EK-LAV11-OP, MP-00306
+
+ M795 U Word count and bus address module
+
+ M7950 DRV11-B Q 16-bit parallel general purpose interface
+ M7950 w/18bit DMA (quad)
+ M7950 Refs: EK-DRV1B-OP, MP-00160, EB-20175-20, ZJ244-RZ
+
+ M7951 DUV11-DA Q Sync interface, character protocol
+ M7951 DU11-DA compatible
+ M7951 Refs: EK-DUV11-OP, EK-DUV11-TM, MP-00297, EB-20175-20
+ M7951 Refs: ZJ237-RZ
+
+ M7952 KWV11-A Q Programmable realtime clock
+ M7952 Caution: uses BC1 for purposes other than BDAL18
+ M7952 Refs: EK-ADV11-OP, MP-00200, EB-20175-20, uNOTE O#108
+
+ M7953 MNCKW ? MINC programmable real time clock
+
+ M7954 IBV11 Q IEC general purpose interface (IEEE 488/GPIB)
+ M7954 Refs: EK-IBV11-TM, IEEE Std. 488-1975, MP-00274, EB-20175-20
+
+ M7955-AD MSV11-CD Q 16-Kword 16-bit MOS RAM with on-board refresh,
+ M7955-AD 18-bit addressing only.
+ M7955-AD (Also M7955-YD, -YJ, -BD, -BJ, -CD, -CJ, -DD)
+
+ M7955-YA MSV11-CA Q 4-Kword 16-bit MOS RAM with refresh
+
+ M7955-YB MSV11-CB Q 8-Kword 16-bit MOS RAM with refresh
+
+ M7955-YC MSV11-CC Q 12-Kword 16-bit MOS RAM with refresh
+
+ M7955-YD MSV11-DC Q 16-Kword 16-bit MOS RAM with refresh
+
+ M7957 DZV11-M Q 4-line double-buffered async EIA MUX
+ M7957 (With modem control, 50 to 10-Kbaud) (quad)
+ M7957 Refs: EK-DZV11-TM, MP-00462, EB-20175-20, EK-DZV11-UG
+ M7957 Refs: ZJ251-RZ
+
+ M7958 IP11 Q Q-bus to I/O daisy chain bus control and interface
+
+ M7959 IP11 Q Q-bus to D-bus cable (-PA for S-box, -YA for no
+ M7959 handle)
+
+ M796 U Unibus master control, used with M782
+
+ M7966 DZS11-A U 8-line async MUX, diff balanced long line I/O
+ M7966 (To be replaced by M8715)
+
+ M7967 DZS11-B U 8-line async MUX, TTL I/O
+ M7967 used with M5926 for 20mA loop.
+
+ M7968 VW01-G U Writing tablet control
+
+ M7969 KW11-A U Watchdog timer
+
+ M797 U Register select module, used with M105
+
+ M7970 TMS11-W U Command and status register
+
+ M7971 TMS11-W U Data control and CRCC logic
+
+ M7972 TMS11-W U Tape motion control
+
+ M7973 VT30-C, -D U VT30 timing and CSR
+
+ M7974 VT30-C U VT30-C picture store
+
+ M7975 VT30-D U VT30-D picture store
+
+ M7976 VT30-C U VT30-C scratch pad and character store
+
+ M7977 VT30-D U VT30-D scratch pad and character store
+
+ M7978 VT30-C, -D U VT30-C, -D color control
+
+ M7979 VT30-C, -D U VT30-C, -D unibus decode
+
+ M798 U 16 non-inverting UNIBUS drivers
+
+ M7980 DD11 U AC/DC lo monitor, 8-pin mate-n-lock output
+
+ M7982 TS11 U Serial tape control module
+
+ M7983 MF11 U MF11-S through MF11-K control module
+
+ M7984-EA MS11-KE * Either M7984-EB, -EC or -ED
+
+ M7984-EB MS11-KE * 16-Kword 39-bit MOS RAM array
+
+ M7984-EC MS11-KE * 16-Kword 39-bit MOS RAM array
+
+ M7984-ED MS11-KE * 16-Kword 39-bit MOS RAM array
+ M7984-ED (*Note: M7984-xx fit into the 11/70's MK11
+ M7984-ED memory box. MS11-KD is 32-Kword and MS11-KC
+ M7984-ED is 128-Kword.)
+
+ M7985 IEC11-A U IEC bus interface
+
+ M799 AA11 U Display control for AA11
+
+ M7990 LAB11 U LAB11 color control
+
+ M7991 PCL11-B U PCL11-B transmitter interface
+
+ M7992 PCL11-B U PCL11-B transmitter unibus control
+
+ M7993 PCL11-B U PCL11-B transmitter registers
+
+ M7994 PCL11-B U PCL11-B transmitter bus logic and drivers
+
+ M7995 PCL11-B U PCL11-B receiver registers
+
+ M7996 PCL11-B U PCL11-B receiver unibus control
+
+ M7997 PCL11-B U PCL11-B receiver interface
+
+ M7998 PCL11-A U differential transceiver (replaced by M8003)
+
+ M8003 PCL11-B U PCL11-B TDM differential bus transceiver
+
+ M8005 IDV11 Q 16-bit relay output (-PO for S-box handles)
+
+ M8006-PA Q 72-bit opto-isolated output module
+
+ M8007-PA Q 72-bit opto-isolated input module
+
+ M8010 PCV11 Papertape reader-punch
+
+ M8012 BDV11 Q Bus terminator, bootstrap and diagnostic ROMs
+ M8012 (CS revision E or earlier, 18 bits only)
+ M8012 (CS Rev. E or later, ECO M8012-ML005 installed)
+ M8012 Refs: EK-BDV11-TM, MP-00489, EB-20175-20, uNOTEs N#003
+ M8012 Refs: N#015, N#035
+
+ M8012-YA BDV11 Q Bus terminator (120 ohm), bootstrap and
+ M8012-YA diagnostic ROMs, 18-bit only
+ M8012-YA Refs: EK-BDV11-TM, MP-00489, EB-20175-20, uNOTEs N#003
+ M8012-YA Refs: N#015, N#035
+
+ M8013 RLV11 Q RL01 disk controller, 1 of 2
+ M8013 18-bit DMA only
+ M8013 Caution: uses BC1 and BD1 for purposes other
+ M8013 than BDAL18 and BDAL19
+ M8013 Refs: EK-RLV11-TD, MP-00635, EB-20175-20
+
+ M8014 RLV11 Q RL01 bus controller, 2 of 2
+ M8014 18-bit DMA only
+ M8014 Caution: uses BC1 and BD1 for purposes other
+ M8014 than BDAL18 and BDAL19
+ M8014 Refs: EK-RLV11-TD, MP-00635, EB-20175-20
+
+ M8015 CSC11 Q Q-bus CSC11-RA interface
+
+ M8016 KPV11-A Q Power fail, realtime clock, no termination
+ M8016 Refs: MP-00356, EB-20175-20
+
+ M8016-YB KPV11-B Q M8016 with 120-ohm termination (18-bit only)
+ M8016-YB Refs: MP-00356, EB-20175-20
+
+ M8016-YC KPV11-C Q M8016 with 250-ohm termination (18-bit only)
+ M8016-YC Refs: MP-00356, EB-20175-20
+
+ M8017-AA DLV11-E/EC Q Single-line async control module
+ M8017-AA (Replaces M8017, M8017-YB)
+ M8017-AA Renamed DLVE1
+ M8017-AA Refs: EK-DLV11-OP, MP-00460, EB-20175-20, ZJ243-RZ
+ M8017-AA Refs: uNOTE N#033
+
+ M8017-PA DLV11-E/EC Q Single-line async control module with S-box handle
+ M8017-PA Refs: EK-DLV11-OP, MP-00460, EB-20175-20
+
+ M8018 KUV11-AA Q Writable control store module, for use with
+ M8018 KD11-F (LSI-11/03) only.
+ M8018 Refs: EK-KUV11-TM, MP-00571
+
+ M8020 DPV11-M Q Single-line serial EIA sync interface
+ M8020 Refs: EK-DPV11-UG, MP-00919, EK-DPV11-CG, EK-DPV11-TM
+ M8020 Refs: EP-DPV11-TM, ZJ314-RZ
+
+ M8020-PA DPV11-S Q Single-line serial sync interface
+ M8020-PA (for BA200 series enclosures)
+ M8020-PA Refs: EK-DPV11-UG, MP-00919, EK-DPV11-CG, EK-DPV11-TM
+ M8020-PA Refs: EP-DPV11-TM, ZJ314-RZ
+
+ M8021 MRV11-BA Q 256-word RAM, space for 4-Kword UV PROM
+ M8021 16-bit addressing only
+ M8021 Refs: EK-MRV11-YM, MP-00354
+
+ M8022 DRQ11-B Q DRQ11-A + Alt. buffering
+
+ M8024 CEV11-A Q CEV11-A Q-bus interface
+
+ M8025 CE11, CEV11 Q CE11, CEV11-A control
+
+ M8026 NCV11-A Q DMA controller
+
+ M8027 LPV11 Q Printer Interface Module (centronics)
+ M8027 Refs: EK-OLP11-TM, EK-LPV11-OP, MP-00467
+
+ M8027-P LPV11-S Q Printer Interface Module (centronics)
+ M8027-P (for BA200 series enclosures)
+ M8027-P Refs: EK-OLP11-TM, EK-LPV11-OP, MP-00467
+
+ M8028 DLV11-F Q Async interface EIA/20mA, error flags, break bit
+ M8028 Refs: EK-DLV11-OP, MP-00461, EB-20175-20, uNOTE N#033
+
+ M8029 RXV21 Q RX02 floppy disk controller, 18-bit DMA only.
+ M8029 Refs: MP-00628, EB-20175-20
+
+ M8034-YC DRL11-A U 48 channel output module, TTL output
+
+ M8034-YD DRL11-B U 48 channel open collector TTL output
+
+ M8035-YC DSL11-A U 48 channel optocoupled input, TTL in
+
+ M8035-YD DSL11-B U 48 channel optocoupled input, 24VDC in
+
+ M8036 NCV11-A Q Q-bus control for NCV11-A
+
+ M8040 DRV11-C Q 16-bit parallel line unit
+
+ M8041 VT30-H Q Q-bus control for VT30-H
+
+ M8043 DLVJ1-M Q 4-Line Asynchronous Interface (formerly DLV11-J)
+ M8043 (CS Rev. E or earlier incompatible with KDF11-A
+ M8043 and KDF11-B)
+ M8043 (CS Rev. E or later, ECO M8043-MR002 installed)
+ M8043 Refs: EK-DLV1J-UG, MP-00586, EB-20175-20, ZJ269-RZ
+ M8043 Refs: uNOTE N#033
+
+ M8044-AA MSV11-DA Q 4-Kword 16-bit MOS RAM
+ M8044-AA (Also M8044-AB, -AC, -AD)
+ M8044-AA Refs: EK-MSVI1-OP, MP-00566
+
+ M8044-BA MSV11-DB Q 8-Kword 16-bit MOS RAM
+ M8044-BA (Also M8044-BB, -BC, -BD)
+ M8044-BA Refs: EK-MSVI1-OP, MP-00566
+
+ M8044-CA MSV11-DC Q 16-Kword 16-bit MOS RAM
+ M8044-CA (Also M8044-CB, -CC, -CD, -CE, -CF, -CH, -CL, -CM)
+ M8044-CA Refs: EK-MSVI1-OP, MP-00566
+
+ M8044-DA MSV11-DD Q 32-Kword 16-bit MOS RAM
+ M8044-DA (Also M8044-DB, -DC, -DD, -DE, -DF, -DH, -DL, -DM)
+ M8044-DA Refs: EK-MSVI1-OP, MP-00566
+
+ M8045-AB MSV11-EA Q 4-Kword 18-bit MOS RAM
+ M8045-AB Refs: EK-MSVI1-OP, MP-00567
+
+ M8045-BA MSV11-EB Q 8-Kword 18-bit MOS RAM
+
+ M8045-CH MSV11-EC Q 16-Kword 18-bit MOS RAM
+ M8045-CH (Also M8045-CJ, -CK, -CL)
+ M8045-CH Refs: EK-MSVI1-OP, MP-00567
+
+ M8045-DA MSV11-ED Q 32-Kword 18-bit MOS RAM
+ M8045-DA (Also M8045-DB, -DC, -DD, -DH, -DJ, -DK, -DL)
+ M8045-DA Refs: EK-MSVI1-OP, MP-00567
+
+ M8046 DLV11-L Q DLV11 with differential drive like M5946
+
+ M8047-AA MXV11-AA Q 4-Kword RAM, 2 async EIA SLU, sockets for 2
+ M8047-AA 24-pin 5V ROMs (Also M8047-AB, -AC, -AD, -AE)
+ M8047-AA (18-bit addressing only on memory)
+ M8047-AA Refs: MP-00730, uNOTEs N#003, N#004, N#015, N#020, N#033
+ M8047-AA Refs: uNOTE O#106
+
+ M8047-CA MXV11-AC Q 16-Kword RAM, 2 async EIA SLU, sockets for 2
+ M8047-CA 24-pin 5V ROMs
+ M8047-CA (Also M8047-CB, -CC, -CD, -CE, -CF, -CH, -CM)
+ M8047-CA Refs: MP-00730, uNOTEs N#003, N#015, N#020, N#033
+ M8047-CA Refs: uNOTE O#106
+
+ M8047-HA MXV11-HA Q 16-Kword RAM, 2 async EIA SLU (8 bits + parity),
+ M8047-HA sockets for 2 24-pin 5V ROMs, 1-K I/O address,
+ M8047-HA jumper to 2-K (Also M8047-HB, -HC, -HD, -HE, -HF)
+
+ M8048 MRV11-C Q Universal PROM/ROM module with sockets for 16
+ M8048 24-pin ROMs, up to 32-Kword (18-bit addressing
+ M8048 only)
+ M8048 Refs: MP-00871
+
+ M8049 DRV11-J Q Hi-density parallel line unit (4 lines x 16 bits)
+ M8049 Refs: EK-DRV1J-UG, MP-00866, EB-20175-20, ZJ244-RZ
+
+ M8049-AA DRV1J-SA/SF Q Modification of DRV11-J to DRV1J-SA/-SF
+ M8049-AA Refs: EK-DRV1J-UG, MP-00866, EB-20175-20, ZJ244-RZ
+
+ M8049-PA DRV1J-S Q M8049 for BA200 series
+ M8049-PA Refs: EK-DRV1J-UG, MP-00866, EB-20175-20, ZJ244-RZ
+
+ M8053 DMV11 Q Microprogrammed controller V.35, RS232/423, with
+ M8053 space for ROM
+ M8053 Refs: EK-DMV11-UG, EK-DMVQM-TM, MP-00942, ZJ328-RZ
+ M8053 Refs: uNOTE N#041
+
+ M8053-AA DMV11 Q Microprogrammed controller (needs one of M5930-
+ M8053-AA M5931) (Also M8053-AB, -AC, -ETC)
+ M8053-AA Refs: EK-DMV11-UG, EK-DMVQM-TM, MP-00942, ZJ328-RZ
+ M8053-AA Refs: uNOTE N#041
+
+ M8053-MA DMV11-A Q M8053 with DDCMP control ROM (point-to-point or
+ M8053-MA multidrop)
+ M8053-MA Refs: EK-DMV11-UG, EK-DMVQM-TM, MP-00942, ZJ328-RZ
+ M8053-MA Refs: uNOTE N#041
+
+ M8053-PA DMV11 Q M8053 with S-box handle
+ M8053-PA Refs: EK-DMV11-UG, EK-DMVQM-TM, MP-00942, ZJ328-RZ
+ M8053-PA Refs: uNOTE N#041
+
+ M8059-FA MSV11-LF Q 64-Kword MOS RAM, single voltage
+ M8059-FA (Also M8059-FC, -FF, -FH, -FJ, -FP, -FV)
+ M8059-FA Refs: EK-MSV0L-UG, EK-MSV1L-CG, MP-01238, ZJ246-RZ
+
+ M8059-KA MSV11-LK Q 128-Kword MOS RAM, single voltage
+ M8059-KA (Also M8059-KC, -KF, -KH, -KJ, -KP, -KV)
+ M8059-KA Refs: EK-MSV0L-UG, EK-MSV1L-CG, MP-01238, ZJ246-RZ
+
+ M8061 RLV12 Q RL01/RL02 disk control
+ M8061 Refs: EK-RLV12-UG, EK-RLV12-TD, MP-01282, ZJ285-RZ
+ M8061 Refs: uNOTE N#041
+
+ M8063-AA KXT11-AA Q FALCON (SBC-11/21) single-board CPU with 2 SLU,
+ M8063-AA 1 parallel line unit, line frequency clock,
+ M8063-AA 16-Kbyte RAM (T11 processor)
+ M8063-AA Refs: EK-KXT11-UG, EK-SBC11-UG, uNOTEs N#007, N#015
+
+ M8063-BA KXT11-BA Q FALCON (SBC-11/21) single-board CPU with 2 SLU,
+ M8063-BA 1 parallel line unit, line frequency clock,
+ M8063-BA 16-Kbyte RAM (T11 processor)
+ M8063-BA Refs: EK-KXT11-UG, EK-SBC11-UG, uNOTEs N#007, N#015
+
+ M8064 DMV11 Q Microprogrammed controller, integral modem, space
+ M8064 for ROM (single-line sync)
+ M8064 Refs: EK-DMV11-UG, EK-DMVQM-TM, MP-00942, ZJ328-RZ
+ M8064 Refs: uNOTE N#041
+
+ M8064-MA DMV11 Q M8064 with DDCMP point-to-point or multidrop,
+ M8064-MA integral modem interface
+ M8064-MA Refs: EK-DMV11-UG, EK-DMVQM-TM, MP-00942, ZJ328-RZ
+ M8064-MA Refs: uNOTE N#041
+
+ M8067-FA MSV11-PF Q 128-Kbyte MOS memory with parity CSR
+ M8067-FA (Also M8067-FB, -FC)
+ M8067-FA Refs: EK-MSV0P-UG, MP-01239, ZJ246-RZ
+
+ M8067-KA MSV11-PK Q 256-kbyte MOS memory with parity CSR
+ M8067-KA (Also M8067-KC, -KE, -KF, -KH, -KJ, -KP, -KV)
+ M8067-KA Refs: EK-MSV0P-UG, MP-01239, ZJ246-RZ
+
+ M8067-LA MSV11-PL Q 512-Kbyte MOS memory with parity CSR
+ M8067-LA (Also M8067-LC, -LF, -LH, -LJ, -LP, -LV)
+ M8067-LA Refs: EK-MSV0P-UG, MP-01239, ZJ246-RZ
+
+ M8080 ISV11-B Q DECdataway QBus Interface
+
+ M8081 Q Image processing frame buffer prototype
+
+ M8084 ISV11-B Q DECdataway Line Interface (Modem)
+
+ M8085 ISV11-B Q DECDataway serial line interface
+
+ M8086-YA LPV11 Q 2-channel LPV11 printer control for S-box
+
+ M8087-PA Q Scanner/printer to Q-bus DMA interface
+
+ M8088-AA ND50 Q ND50 memory controller for demand printing solution
+
+ M8089-AA Q ND50 adapter ADLC to Q-bus data translation
+
+ M8090 ICS11 U ICS11 master control
+
+ M8094 ICR11 U ICR11 remote master control
+
+ M8096 ICR11 U ICR11 remote slave control
+
+ M8098 ICR11 U ICR11 remote modem control, 1 Megabaud
+
+ M8100 U 11/45 data path module
+
+ M8101 U 11/45 general register address module
+
+ M8102 U 11/45 instruction register control module
+
+ M8103 U 11/45 ROM address control module
+
+ M8104 U 11/45 processor data and UNIBUS registers module
+
+ M8105 U 11/45 timing and miscellaneous control module
+
+ M8106 U 11/45 UNIBUS control module (Replaced by M8119)
+
+ M8107 U 11/45 segmentation address paths module
+
+ M8108 KT11-C U 11/45 segmentation status register module
+
+ M8108-YA KT11-CD U 11/45 segmentation status register module
+
+ M8109 U 11/45 timing generator module
+
+ M8110 U 11/45 memory control for MOS memory
+
+ M8111 U 11/45 1-Kword 16-bit bipolar memory
+
+ M8111-YA U 11/45 1-Kword 18-bit bipolar memory
+
+ M8112 U 11/45 floating point ROM control module
+
+ M8113 U 11/45 floating point exponent data paths module
+
+ M8114 U 11/45 fraction high order data path module
+
+ M8115 U 11/45 fraction low order data path module
+
+ M8116 U 11/45 segmentation jumper board
+
+ M8119 U 11/45 UNIBUS control for FP11-C compatibility
+ M8119 (Replaces M8106)
+
+ M8120 U 11/45 memory control for bipolar memory
+
+ M8121-YA MS11-AP U 4-Kword 18-bit bipolar memory
+
+ M8123 KB11-C U 11/70 ROM & address control, FP11-C compatible
+
+ M8124 RH70-C U 11/74 M8150 with expanded silo
+
+ M8125 RH70-C U 11/74 M8153-YA new layout
+
+ M8126 FP11-C U 11/70 fraction processor, high order
+
+ M8127 FP11-C U 11/70 fraction processor, low order
+
+ M8128 FP11-C U 11/70 floating point ROM control
+
+ M8129 FP11-C U 11/70 fraction processor, exponent path
+
+ M8130 KB11-C U 11/70 data paths module
+
+ M8131 KB11-C U 11/70 general registers and ALU control
+
+ M8132 KB11-C U 11/70 instruction register decode & condition
+ M8132 codes
+
+ M8132-YA KB11-C U 11/74 instruction register decode & condition
+ M8132-YA codes modified to indicate full decode of ASRB
+
+ M8133 KB11-C U 11/70 ROM & ROM control module
+
+ M8134 KB11-C U 11/70 processor data & UNIBUS registers module
+
+ M8135 KB11-C U 11/70 trap and miscellaneous control module
+
+ M8136 KB11-C U 11/70 UNIBUS and console control module
+
+ M8137 KB11-C U 11/70 system address path module
+
+ M8138 KB11-C U 11/70 segmentation status register
+ M8138 used with FP11-B
+
+ M8138-YA KB11-C U 11/70 segmentation status register,
+ M8138-YA used with FP11-C.
+
+ M8139 KB11-C U 11/70 timing generator module
+
+ M8140 KB11-C U 11/70 segmentation and console control module
+
+ M8141 KB11-C U 11/70 mapping box
+
+ M8142 KB11-C U 11/70 cache control board
+
+ M8143 KB11-C U 11/70 cache address memory board
+
+ M8144 KB11-C U 11/70 cache data memory
+
+ M8145 KB11-C U 11/70 cache data path
+
+ M8147 MJ11-A/B U 11/70 memory control and timing module
+ M8147 (Replaces M8148)
+
+ M8148 MJ11-A U 11/70 memory control and timing module
+ M8148 (Replaced by M8147)
+
+ M8149 MJ11 U 11/70 memory transceiver card
+
+ M8150 RH70 U 11/70 MASSBUS data path module
+
+ M8151 RH70 U 11/70 MASSBUS control and status module
+
+ M8152 RH70 U 11/70 MASSBUS address and word count registers
+
+ M8153 RH70 U 11/70 MASSBUS UNIBUS control
+ M8153 (M8150-M8153 is option RH55 in an 11/55)
+
+ M8153-YA RH70 U 11/70 M8153 with independent NED timeout for
+ M8153-YA RH70-B (see M8125)
+
+ M8154 RH70 U 11/70 MES, massbus controller
+
+ M8156 RHS70-A U Data path module
+
+ M8157 RHS70-A U DMA control module
+
+ M8158 MK11 U Address buffer module
+
+ M8159 MK11 U Data buffer module
+
+ M8160 MK11 U Control A module
+
+ M8161 MK11 U Control B module
+
+ M8162 MK11 U Port MUX A module
+
+ M8163 MK11 U Port MUX B module
+
+ M8164 MK11/MKA11 U Data buffer module (Replaces M8159)
+
+ M8165-YA KE74-A U 11/74 CCR, CISP control ROM logic card #1
+
+ M8165-YB KE74-A U 11/74 CCR, CISP control ROM logic card #2
+
+ M8166 KE74-A U 11/74 CCS, CISP control store
+
+ M8167 KE74-A U 11/74 CDI, CISP decimal integral
+
+ M8168 KE74-A U 11/74 DSC, CISP descriptor unit
+
+ M8169 U 11/74 maintenance display and control
+
+ M8177 KB11-CM U 11/74 system address path
+
+ M8181 KB11-EM U 11/74 mapping box
+
+ M8182 KB11-CM U 11/74 cache control board
+
+ M8183 KB11-CM U 11/74 cache address memory board
+
+ M8184 KB11-EM U 11/74 cache data memory
+
+ M8185 KB11-EM U 11/74 cache data path
+
+ M8185-YC KDF11-AC Q 11/23 CPU without options
+ M8185-YC Refs: EK-KDF11-UG
+
+ M8186 KDF11-A Q 11/23 CPU (Prior to etch rev. C, 18-bit
+ M8186 addressing only. Caution, uses BC1, BD1,
+ M8186 BE1, BF1 for purposes other than BDAL18-21)
+ M8186 Refs: EB-18451-20, MP00734, EH-17898-20, EK-KDF11-UG
+ M8186 Refs: EK-KDFAA-CG, ED-2136-20, ED-18325-53, uNOTEs N#006
+ M8186 Refs: N#017
+
+ M8186-YA KDF11-AA Q 11/23 CPU with KTF11-AA (MMU) and sockets for
+ M8186-YA KEF11-AA (FP11)
+ M8186-YA Refs: EB-18451-20, MP00734, EH-17898-20, EK-KDF11-UG
+ M8186-YA Refs: EK-KDFAA-CG, ED-2136-20, ED-18325-53, uNOTEs N#006
+ M8186-YA Refs: N#017
+
+ M8186-YB KDF11-AB Q 11/23 CPU with KTF11-AA (MMU) and KEF11-AA (FP11)
+ M8186-YB Refs: EB-18451-20, MP00734, EH-17898-20, EK-KDF11-UG
+ M8186-YB Refs: EK-KDFAA-CG, ED-2136-20, ED-18325-53, uNOTEs N#006
+ M8186-YB Refs: N#017
+
+ M8186-YC KDF11-AC Q 11/23 CPU without options
+ M8186-YC Refs: EB-18451-20, MP00734, EH-17898-20, EK-KDF11-UG
+ M8186-YC Refs: EK-KDFAA-CG, ED-2136-20, ED-18325-53, uNOTEs N#006
+ M8186-YC Refs: N#017
+
+ M8188 FPF11 Q Floating point processor for PDP-11/23[+], (11/24?)
+ M8188 Refs: EK-FPF11-TM, MP-01285
+
+ M8189 KDF11-BA Q 11/23-PLUS single-board CPU
+ M8189 Refs: EK-KDFEB-UG, MP-01236, uNOTE N#015
+
+ M8190 KDJ11-B U 11/84 CPU: J11 CPU 15MHz with unusable socket for
+ M8190 FPJ11 and 2 SLUs, boot & diagnostic ROMs, 3 ROM
+ M8190 sockets, 8-Kbyte cache.
+ M8190 Refs: EK-KDJ1B-UG, uNOTE N#039
+
+ M8190-AB KDJ11-BB Q J11 CPU 15MHz with 2 boot & diagnostic ROMs
+ M8190-AB FPJ11 compatibility (warm floating point, but
+ M8190-AB will accept FPA)
+ M8190-AB Refs: EK-KDJ1B-UG, uNOTE N#039
+
+ M8190-AC KDJ11-BD Q J11 CPU 15MHz with 2 boot & diagnostic ROMs,
+ M8190-AC FPJ11-AA
+ M8190-AC Refs: EK-KDJ1B-UG, uNOTE N#039
+
+ M8190-AD KDJ11-BA Q J11 CPU 18MHz with 2 boot & diagnostic ROMs
+ M8190-AD FPJ11 compatibility (warm floating point, but
+ M8190-AD will accept FPA)
+ M8190-AD Refs: EK-KDJ1B-UG, uNOTE N#039
+
+ M8190-AE KDJ11-BF Q/U 11/83-84 CPU J11 CPU 18MHz with 2 boot &
+ M8190-AE diagnostic ROMs, FPJ11-AA.
+ M8190-AE Refs: EK-KDJ1B-UG, uNOTE N#025, N#030, N#035, N#039
+
+ M8191 KTJ11-B U 11/84 UNIBUS PMI controller (contains 4 optional
+ M8191 boot ROM sockets (M9312 compatible)).
+
+ M8192 KDJ11-AA Q LSI-11/73 CPU, 8-Kbyte cache, not FPJ11-AA
+ M8192 compatibile (but can be upgraded)
+ M8192 Refs: EK-KDJ1A-UG, uNOTEs N#006, N#008, N#009, N#011
+ M8192 Refs: N#025, N#039
+
+ M8192-YB KDJ11-AB Q LSI-11/73 CPU, 8-Kbyte cache, FPJ11-AA compatible.
+ M8192-YB Refs: EK-KDJ1A-UG, uNOTEs N#006, N#008, N#009, N#011, N#040
+
+ M8192-YC KDJ11-AC Q LSI-11/73 CPU, 8-Kbyte cache, FPJ11-AA installed.
+ M8192-YC Refs: EK-KDJ1A-UG, uNOTEs N#006, N#008, N#009, N#011, N#040
+
+ M8194 KDF11 Q Data memory module
+
+ M8195 KDF11 Q Cache data path module
+
+ M820 KA11 U 11/20 data path control module
+
+ M8200 DMC11 U 1-line sync DDCMP DMA, microprocessor board
+ M8200 (Space for 1K ROM)
+ M8200 Refs: EK-DMCMP-TM, EP-DMCMP-TM, MP-00076, EK-DMCLU-MM
+
+ M8200-YA DMC11-R U 1-line sync DDCMP microprocessor with 1K control
+ M8200-YA ROM (point-to-point, used with M8201).
+ M8200-YA Refs: EK-DMCMP-TM, EP-DMCMP-TM, MP-00076, EK-DMCLU-MM
+
+ M8200-YB DMC11-AL U 1-line sync DDCMP microprocessor with 1K control
+ M8200-YB ROM (point-to-point slave, used with M8202).
+ M8200-YB Refs: EK-DMCMP-TM, EP-DMCMP-TM, MP-00076, EK-DMCLU-MM
+
+ M8200-YC DMC11 U 1-line sync DDCMP microprocessor with 1K control
+ M8200-YC ROM for LPA11.
+ M8200-YC Refs: EK-DMCMP-TM, EP-DMCMP-TM, MP-00076, EK-DMCLU-MM
+
+ M8201 DMC11 U 1-line sync DDCMP DMA, EIA & V35 line board
+ M8201 Refs: EK-DMCMP-TM, EP-DMCMP-TM, MP-00076, EK-DMCLU-MM
+
+ M8202 DMC11 U 1-line sync DDCMP DMA, coax line board
+ M8202 Refs: EK-DMCMP-TM, EP-DMCMP-TM, MP-00076, EK-DMCLU-MM
+
+ M8202-YA DMC11-MA U 1Mbps integral modem line unit
+ M8202-YA Refs: EK-DMCMP-TM, EP-DMCMP-TM, MP-00076, EK-DMCLU-MM
+
+ M8202-YB DMC11 U 500-Kbaud integral modem line unit
+ M8202-YB Refs: EK-DMCMP-TM, EP-DMCMP-TM, MP-00076, EK-DMCLU-MM
+
+ M8202-YC DMC11 U 250-Kbaud integral modem line unit
+ M8202-YC Refs: EK-DMCMP-TM, EP-DMCMP-TM, MP-00076, EK-DMCLU-MM
+
+ M8202-YD DMC11-MD U 56Kps integral modem line unit
+ M8202-YD Refs: EK-DMCMP-TM, EP-DMCMP-TM, MP-00076, EK-DMCLU-MM
+
+ M8202-YE ISB11-A U Multi-drop 56-Kbaud integral modem line unit
+
+ M8203 DMP11 U Line unit, RS-449, integral modem
+
+ M8204 KMC11-A U Microprocessor, DMC11 code, 1K RAM programme space
+
+ M8206 DMC11 U Microprocessor, DMC11 code, 4K RAM programme space
+ M8206 Refs: EK-DMCMP-TM, EP-DMCMP-TM, MP-00076, EK-DMCLU-MM
+
+ M8207 DMC11 U Microcontroller with space for ROM
+ M8207 Refs: EK-DMCMP-TM, EP-DMCMP-TM, MP-00076, EK-DMCLU-MM
+
+ M8207-RA DMR11 U Microprocessor based sync communication
+ M8207-RA controller, implements DDCMP protocol.
+ M8207-RA Refs: EK-DMR11-TM, EP-DMR11-TM, MP-00911, EK-M8207-TM
+ M8207-RA Refs: EK-M8203-TM
+
+ M8207-YA DMP11 U Microprocessor with DDCMP control ROM
+ M8207-YA (point-to-point or multidrop, used with M8203)
+ M8207-YA Refs: EK-DMR11-TM, EP-DMR11-TM, MP-00911, EK-M8207-TM
+ M8207-YA Refs: EK-M8203-TM
+
+ M8208 VT1X3-MM Q Maintenance Module for 11MDS system (VT103)
+ M8208 (to be installed in specially-wired slot)
+
+ M821 KA11 U 11/20 register control module
+
+ M8217 DW11-A U UNIBUS to Qbus interface module
+
+ M822 KA11 U 11/20 flag control module
+
+ M823 KA11 U 11/20 codes data module
+
+ M8238 KU780-A 2K WCS
+
+ M824 KA11 U 11/20 priority module
+
+ M825 KA11 U 11/20 power failure and control module
+
+ M8254 DA11-KA U Interprocessor buffer
+
+ M8255 KY11-R,RC U Unibus serial console micro control
+
+ M8255-01 KY11-RE U Unibus serial european console micro control
+
+ M8256 RX211 U RX02 floppy disk controller
+
+ M826 U 75 to 250-ns clock with SR (8-phase clock)
+
+ M8264 KD11-D/E U 11/34 No sack time-out (needed for KD11-D, KD11-E)
+
+ M8265 KD11-EA U 11/34A data paths module (Replaces M7265)
+
+ M8266 KD11-EA U 11/34A control module (Replaces M7266)
+
+ M8267 FP11-A U 11/34A floating point processor
+
+ M8267-TA FP11-A U Test module for M8267
+
+ M8268 KK11-A U 11/34 cache module
+
+ M827 KE11-A U Clock and states
+
+ M829 CR-11 U CR-11/CM-11 card reader controller
+ M829 (Requires M105 and M782 or M7820 or M7821)
+
+ M8290 CR-11 U CR-11/CM-11 card reader controller
+
+ M8290-YA CR-11 U CR-11/CM-11 card reader controller w/filter
+ M8290-YA on input strobe for use w/EMI cable
+
+ M8291 CR-11 U CR-11/CM-11 card reader controller
+
+ M8293 MF11-LP U 16 K UNIBUS timing
+
+ M8294 MM11-W/-WP U 32K timing and UNIBUS interface
+
+ M8295 VT30-H U RGB graphics memory board
+
+ M8377 KXT11-CA Q T11 16-bit single-board computer.
+ M8377 32-Kbytes of static RAM, two 28-pin
+ M8377 sockets for up to 32-Kbytes of user ROM
+ M8377 or static RAM. 20 lines of parallel I/O,
+ M8377 three programmable SLUs - one async console line,
+ M8377 and two sync/async (one with modem control)
+ M8377 with rates up to 76.8-Kbaud.
+ M8377 Two channels of DMA, three programmable
+ M8377 interval timers. System line time clock and
+ M8377 Onboard diagnostic with LED indicators.
+ M8377 Can operate as either a single-line board
+ M8377 computer, or as a peripheral processor.
+ M8377 (As a peripheral processor, up to 14
+ M8377 KXT11-CAs may be configured on a single
+ M8377 Qbus with a host processor such as the
+ M8377 KDJ11 or KDF11. This product is fully
+ M8377 supported by MicroPower/Pascal and
+ M8377 associated tool kits.)
+ M8377 Refs: EK-KXTCA-UG, EK-KXTCA-HR, AA-Y615A-TK, AA-AU63A-TC
+ M8377 Refs: AA-AU64A-TC, uNOTEs N#016, N#018, N#032, N#034
+
+ M8392-AA Q 68020, 1-Mbyte, 2 x 8-channel UARTs
+
+ M8392-BA Q 68020, 1-Mbyte, 2 x 8-channel UARTs
+ M8392-BA with S-box handle
+
+ M8396 DMF32 U 8 async lines, only lines 0 and 1 have
+ M8396 split speed capability and full modem
+ M8396 control. DMA or silo mode. 50 to 19.2K. 1
+ M8396 sync line up to 19.2K, 1 line printer
+ M8396 interface or 1 parallel interface.
+
+ M8398 DMZ32 U 24-line async interface, up to 19.2K.
+ M8398 Optional remote communication panel. DMA mode.
+
+ M8578 MRV11-D Q PROM/ROM module with 16 sockets; 24/28-pin devices
+ M8578 including 8K by 8 static RAMs, and 32K by 8 chips
+ M8578 for a maximum of 512K-bytes of 22-bit addressing.
+ M8578 Requires MXV11-B2 bootstrap ROM for bootstrapping
+ M8578 capability. Q22.
+ M8578 Refs: EK-MRV1D-UG, MP-01602, uNOTE N#003
+
+ M8586 U LP20 control
+
+ M8587 U LP20 data path
+
+ M8631-AA MCV11-DA Q 4-Kword 16-bit 2K x 8 static CMOS RAM with 96-hour
+ M8631-AA battery backup (Also M8631-AF, -AL). Q22.
+ M8631-AA Refs: EK-MCV1D-UG, EK-MCV1D-RC, MP-01309
+
+ M8631-CA MCV11-DC Q 16-Kword 16-bit 2k x 8 static CMOS RAM with 96-hour
+ M8631-CA battery backup (Also M8631-CF, -CL). Q22.
+ M8631-CA Refs: EK-MCV1D-UG, EK-MCV1D-RC, MP-01309
+
+ M8634 IEQ11-A Q DMA version of IEEE(GPIB) interface
+ M8634 Refs: EK-IEUQ1-UG, MP-01180, ZJ361-RZ, EY-1064E-PO
+
+ M8634-PA IEQ11-S Q Communications Controller (IEC/IEEE)
+ M8634-PA (for BA200 series)
+ M8634-PA Refs: EK-IEUQ1-UG
+
+ M8636 KWV11-W Q Watchdog Timer, 5 in, 2 out, optical isolation
+
+ M8637-BA MSV11-JB Q 1-Mbyte ECC PMI RAM with CSR. Q22.
+ M8637-BA (Also M8637-BC, -BF, -BH, -BL, -BP)
+ M8637-BA Refs: EK-MSV1J-UG, MP-02056, uNOTEs N#028, N#030
+
+ M8637-CA MSV11-JC Q 2-Mbyte ECC PMI RAM with CSR, Q22.
+ M8637-CA (Also M8637-CC, -CF, -CH, -CL, -CP)
+ M8637-CA Refs: EK-MSV1J-UG, MP-02056, uNOTEs N#028, N#030
+
+ M8637-DA MSV11-JD Q 1-Mbyte ECC RAM.
+ M8637-DA (Also M8637-DC, -DE, -DF, -DH, -DL, -DP, -DT, -DV)
+ M8637-DA Refs: EK-MSV1J-UG, MP-02056, uNOTEs N#028, N#030
+
+ M8637-EA MSV11-JE Q 2-Mbyte ECC RAM.
+ M8637-EA (Also M8637-EC, -EE, -EF, -EH, -EL, -EP, -ET, -EV)
+ M8637-EA Refs: EK-MSV1J-UG, MP-02056, uNOTEs N#028, N#030
+
+ M8638 Q HDLC DMA single channel sync MUX controller
+
+ M8639 RQDX1 Q RD51/52 & RX50 MFM Disk control module
+ M8639 (Needs microcode rev 9.0 code ROMs for RD52)
+ M8639 (Must be final device in bus)
+ M8639 Refs: EK-RQDX1-UG, MP-01731, uNOTE N#043
+
+ M8639-YA RQDX1 Q RD51/52 & RX50 MFM Disk control module
+ M8639-YA (Must be final device in bus)
+ M8639-YA Refs: EK-RQDX1-UG, MP-01731, uNOTE N#043
+
+ M8639-YB RQDX2 Q RD51/52 & RX50 MFM Disk control module, can
+ M8639-YB be expanded (must be final DMA device in bus)
+ M8639-YB Refs: EK-RQDX2-UG, MP-01731, uNOTE N#043
+
+ M8659 Q LSI-11 Bus Grant card (VT71 Grant Card)
+
+ M8687 U RM05 Drive interface
+
+ M8716 DR11-W U General purpose DMA parallel interface
+ M8716 (DR11-B hex)
+
+ M8717 U Interprocessor interrupt and sanity timer
+
+ M8718 U Modem control, 16-lines (CTS & RTS)
+
+ M8719 IP112 D UNIBUS to D-BUS cable (I/O daisy chain bus)
+ M8719 control and interface
+
+ M8720-YA MSS11-KA U 4-Kword 18-bit MOS RAM
+
+ M8720-YB MSS11-KB U 8-Kword 18-bit MOS RAM
+
+ M8720-YC MSS11-KC U 12-Kword 18-bit MOS RAM
+
+ M8720-YD MSS11-KD U 16-Kword 18-bit MOS RAM
+
+ M8720-YE MSS11-KE U 4-Kword 18-bit static MOS RAM
+
+ M8720-YF MSS11-KF U 8-Kword 18-bit static MOS RAM
+
+ M8720-YH MSS11-KH U 12-Kword 18-bit static MOS RAM
+
+ M8720-YJ MSS11-KJ U 16-Kword 18-bit static MOS RAM
+
+ M8721-YA U UNIBUS repeater
+
+ M8721-YB DT07 U Isolated loopversion DT07 port module
+
+ M8721-YC DT07 U DT07 switched UNIBUS repeater
+
+ M8721-YD DT07 U Port terminated DT07 port module
+
+ M8722-AH MS11-MA U 128-Kbyte MOS ECC memory (11/44, 11/24)
+ M8722-AH (Also M8722-AN)
+
+ M8722-BA MS11-MB U 256-Kbyte MOS ECC memory (11/44, 11/24)
+ M8722-BA (Also M8722-BB, -BC, -BD, -BF, -BH, -BJ, -BK, -BL,
+ M8722-BA -BM, -BN)
+
+ M8728-AA MK11 U 64-Kword 39-bit MOS memory array (11/70, 11/750)
+ M8728-AA (Also M8728-AB, -AC, -AD, -AE, -AF, -AH, -AK, -AM,
+ M8728-AA -AN)
+
+ M8728-CM MK11 U 16-Kword 39-bit MOS memory array (11/70)
+ M8728-CM (Also M8728-CN)
+
+ M873 U UNIBUS restart with space for 4 ROMs (256 x 4)
+
+ M8730 KW11-C U Calendar and clock module
+
+ M8730-YA KW11-C U Calendar and clock module with more features
+
+ M8739 KLESI-UA U LESI-to-UNIBUS interface for RC25, TU81
+
+ M8743-AA MDECS-AA U 512-Kbyte ECC RAM
+ M8743-AA (Also M8743-AB, -AC, -AD, -AE, -AF, -AH, -AJ, -AK,
+ M8743-AA -AL, -AM, -AN, -AP, -AV)
+
+ M8743-BA MS11-PB U 1-Mbyte ECC RAM
+ M8743-BA (Also M8743-BB, -BC, -BD, -BE, -BF, -BH, -BJ, -BK,
+ M8743-BA -BL, -BM, -BN, -BP, -BV)
+
+ M8750 - VAX-11/750 1Mbyte MOS memory assembly
+ M8750 Refs: MP-01398
+
+ M8901 - TU16 data synchronizer, replaced by M8901-YB
+
+ M8901-YA - TM02-FE data synchronizer for 75 IPS drive,
+ M8901-YA replaced by M8901-YC
+
+ M8901-YB - TU16 data synchronizer, replaces M8901
+
+ M8901-YC TM02-FE U Data synchronizer for 75 IPS drive
+ M8901-YC (Replaces M8901-YA, -YC)
+
+ M8901-YD TM03-AB U Data synchronizer for 125 IPS drive
+
+ M8902 TM02-FA U TM02 tape control, PE (also TM02-FB, -FC, -FD)
+
+ M8902-YA TM02-FE U M8902 for 75 IPS drive (also TM02-FF, -FH, -FJ)
+
+ M8903 TM02-FA U TM02 tape control, common mode
+ M8903 (also TM02-FB, -FC, -FD)
+
+ M8903-YA TM02-FE U M8903 for 75 IPS drive (also TM02-FF, -FH, -FJ)
+
+ M8904 TM02-FA U TM02 tape control, NRZI (also TM02-FB, -FC, -FD)
+
+ M8904-YA TM02-FE U TU45 M8904 (also TM02-FF, -FH, -FJ)
+
+ M8905 TM02-FA U TM02 maintenance register (also TM02-FB, -FC, -FD)
+
+ M8905-YA TM02-FE U TM02-FE M8905 for 75 IPS drive
+
+ M8905-YB TM03 U TM03 M8905
+
+ M8906 TM02 U TM02 16-bit fiddler
+
+ M8908-YA TM03 U TM03 MASSBUS interface (replaces M8908)
+
+ M8909 TM02 U TM02 MASSBUS interface (replaced by M8909-YA)
+
+ M8909-YA TM02/03 U TM02/03 MASSBUS interface (replaces M8909)
+
+ M8911 - TU16 (TM02) slave clock, motion delay, replaced
+ M8911 by M8931 on TE16
+
+ M8912 - TE16 slave test function generator
+
+ M8913 TM03 U Data driver
+ M8913 2 H854, 10 lines driven from board, 20 lines
+ M8913 brought out, TU16 (from O/M list)
+
+ M8913-YA TM03 U Data driver
+ M8913-YA M8913 with terminator resistors, TU16
+ M8913-YA (from O/M list)
+
+ M8916 TU16-W - logic and write board
+
+ M8928 TM03 U TU45 magtape adapter for Pertec 9000
+ M8928 (replaces M8921, M8928)
+
+ M8931 - TU16 (TM02 & TM03) slave clock, motion delay
+ M8931 replaces 8911
+
+ M8932 TM03 - tape control
+
+ M8933 TM03 U tape control common mode
+
+ M8934 TM03 U tape control NRZI
+
+ M8937 TM03 - TM03, control and write drivers
+
+ M8981-AA KDJ11-EA Q/U 11/93-94 CPU 18MHz, DCJ11, FPJ11, 2-Mbyte parity
+ M8981-AA RAM, 8 async SLUs, boot/diagnostic ROM
+ M8981-AA Refs: EK-26921-00 (DCJ11), uNOTE N#040
+
+ M8981-BA KDJ11-EB Q/U 11/93-94 CPU 18MHz, DCJ11, FPJ11, 4-Mbyte parity
+ M8981-BA RAM, 8 async SLUs, boot/diagnostic ROM
+ M8981-BA Refs: EK-26921-00 (DCJ11), uNOTE N#040
+
+ M9001 - Bus connector
+
+ M9001-YA TE16 - M9001 with 8 lines grounded
+
+ M9001-YB TE16 - M9001 terminated
+
+ M9001-YC TE16 - M9001-YA terminated
+
+ M9014 U UNIBUS to 3 H854s
+
+ M9015 U 3 H854s to UNIBUS
+
+ M9031 U UNIBUS to 3 3M cables for 11/74
+
+ M9037 Q Grant continuity
+
+ M9039 U TE16 terminator
+ M9039 (will replace M9001 series & M8913)
+
+ M9047 Q Grant continuity (also M9047-SA, -SF)
+
+ M9058 Q Distribution/adapter/buffer board for RQDX1/2/3
+ M9058 to four drives and switch panels, fits BA23/124.
+
+ M9061-AA U 11/84 AC/DC reboot sequencer
+
+ M920 U UNIBUS connector
+
+ M9202 U UNIBUS connector, inverted (M9192+M9292 assembled
+ M9202 1" apart with 2' cable)
+
+ M930 U Terminator for PDP11 bus, 120-ohm to +3V, 1000pf
+ M930 on BF1 & BF2
+
+ M9300 U UNIBUS B terminator (M930 with NPR logic)
+
+ M9301 U UNIBUS terminator with space for 512-word ROM
+ M9301 bootstrap (slots A & B in hex SPC; addresses:
+ M9301 765000, 773000)
+ M9301 Refs: EK-M9301-TM
+
+ M9301-SA U M9301 with Western Electric bootstrap
+ M9301-SA Refs: EK-M9301-TM
+
+ M9301-SB U M9301 with Chase bootstrap (M9301-YA + 2nd RP04)
+ M9301-SB Refs: EK-M9301-TM
+
+ M9301-SC U M9301 with Chase bootstrap (M9301-YC + 2nd RK11)
+ M9301-SC Refs: EK-M9301-TM
+
+ M9301-SD U M9301 with SEDM bootstrap for WECO
+ M9301-SD Refs: EK-M9301-TM
+
+ M9301-SE U M9301 with Canada Post Office bootstrap
+ M9301-SE Refs: EK-M9301-TM
+
+ M9301-SF U M9301 with DA11 bootstrap
+ M9301-SF Refs: EK-M9301-TM
+
+ M9301-SH U M9301-YC modified for RX11
+ M9301-SH Refs: EK-M9301-TM
+
+ M9301-SJ U M9301-YA + RF11 boot (WECO)
+ M9301-SJ Refs: EK-M9301-TM
+
+ M9301-SK U Boot for DMC11, RX01, TU10, DL11, PTR, ASCII,
+ M9301-SK diagnostics
+ M9301-SK Refs: EK-M9301-TM
+
+ M9301-SL U M9301-SE with no remote switch panel
+ M9301-SL Refs: EK-M9301-TM
+
+ M9301-SV U M9301 with DQ11-DA DECnet loader, RK, RX, TMA11
+ M9301-SV boots
+ M9301-SV Refs: EK-M9301-TM
+
+ M9301-SW U M9301-SF updated with DA11 DECnet 2 bootstrap
+ M9301-SW Refs: EK-M9301-TM
+
+ M9301-SX U M9301 with DA11 DECnet 2 loader
+ M9301-SX Refs: EK-M9301-TM
+
+ M9301-SY U M9301 with DMC11 DECnet & TJE16 loader
+ M9301-SY Refs: EK-M9301-TM
+
+ M9301-WA U M9301 with 765000 & 766000 addresses, DN87S SMP
+ M9301-WA boot (TOPS-10)
+ M9301-WA Refs: EK-M9301-TM
+
+ M9301-WB U M9301-WA except DN20-CC, -CD SMP boot (TOPS-10)
+ M9301-WB Refs: EK-M9301-TM
+
+ M9301-YC U M9301 with 11/70 bootstrap
+ M9301-YC Refs: EK-M9301-TM
+
+ M9301-YD U M9301 with DDCMP bootstrap
+ M9301-YD Refs: EK-M9301-TM
+
+ M9301-YE U M9301 with bootstrap for DECnet, DL11-E, DU11,
+ M9301-YE DUP11, low speed PTR, ASCII console
+ M9301-YE Refs: EK-M9301-TM
+
+ M9301-YF U M9301 with boot for PC11, RP02-6, RS03-4, RK05-6,
+ M9301-YF RX01, TU10, TU16, TU56, TS03, TTY, ASCII console,
+ M9301-YF diagnostics
+ M9301-YF Refs: EK-M9301-TM
+
+ M9301-YH U M9301 with 11/60 bootstrap (works with 11/70)
+ M9301-YH Refs: EK-M9301-TM
+
+ M9301-YJ U M9301 with bootstrap for DECnet DMC11, RX01, TU10,
+ M9301-YJ ASCII console
+ M9301-YJ Refs: EK-M9301-TM
+
+ M9301-YL U M9301 with Olivetti bootstrap
+ M9301-YL Refs: EK-M9301-TM
+
+ M9302 U 11/04 UNIBUS terminator, far end
+ M9302 (Fits in any Standard UNIBUS slot, terminating all
+ M9302 newer UNIBUS machines.)
+
+ M9302-YA U M9302 with different resistors for minimum UNIBUS
+ M9302-YA levels
+
+ M9302-YB U M9302 card used to mount an overtemperature relay
+
+ M9303 U M930 with individual +5V for each terminator (used
+ M9303 with 2347 UNIBUS tester)
+
+ M9303-YA U M9303 + M9307 wired together with 1" spacers.
+ M9303-YA (used with 2347 UNIBUS tester)
+
+ M9304 U Long M930 for low margin testing
+
+ M9304-YA U Long M930 for high margin testing
+
+ M9305 U M981 for low margin testing
+
+ M9305 U M981 for high margin testing
+
+ M9306 U 11/04 near end UNIBUS terminator, no boot
+
+ M9306-YB U M9306 with different resistors to give a minimum
+ M9306-YB UNIBUS level when put in parallel with another
+ M9306-YB terminator.
+
+ M9307 U M919 for 2 40-conductor 3M cable
+
+ M9308 U Single-ended margin head (UNIBUS terminator with
+ M9308 sack turn-around logic)
+
+ M9309 U Long M930
+
+ M9311 U M9301 with 766000 and 763000 addresses and GT62
+ M9311 comm boot loader.
+
+ M9312 U Bootstrap terminator with 5 empty ROM sockets; one
+ M9312 for CPU diagnostics, 4 for peripheral boots
+ M9312 Refs: EK-M9312-TM
+
+ M9312-YA U M9312 revision C or later for 11/74
+ M9312-YA Refs: EK-M9312-TM
+
+ M9313 U UNIBUS exercisor + terminator (UET)
+
+ M9400 REV11 Q Terminator, DMA refresh, bootstrap (bootstrap for
+ M9400 use with KD11-F and KD11-HA processors only.
+ M9400 Termination for 18-bits only.
+ M9400 DMA refresh may be used in any system.)
+
+ M9400-YA REV11-A Q 120-ohm terminators with refresh & floppy boot
+ M9400-YA Refs: MP-00073, EB-20175-20, uNOTE N#035
+
+ M9400-YB TEV11 Q 120-ohm terminators
+ M9400-YB Refs: MP-00073, EB-20175-20, uNOTE N#035
+
+ M9400-YC REV11-C Q Refresh and boot alone
+ M9400-YC Refs: MP-00073, EB-20175-20, uNOTE N#035
+
+ M9400-YD REV11-D Q Headers alone, no terminators, Cable
+ M9400-YD connector (18-bit bus only).
+ M9400-YD BCV1A-XX = M9400-YD + M9401 + 2 x BC05L-XX cable
+
+ M9400-YE REV11-E Q Headers and 240-ohm terminators (18-bit bus only)
+ M9400-YE (can be used with M9401 as a Qbus extender)
+ M9400-YE BCV1B-XX = M9400-YE + M9401 + 2 x BC05L-XX cable
+ M9400-YE Refs: uNOTE N#035
+
+ M9400-YF REV11-F Q M9400-YA with boot sockets with no ROMs
+ M9400-YF Refs: uNOTE N#035
+
+ M9400-YH REV11-H Q LDP/COMM boot & floppy boot with terminators
+ M9400-YH Refs: MP-00331, (MP-00074 ?), EB-20175-20, uNOTE N#035
+
+ M9400-YJ REV11-J Q DMA refresh bootstrap, cable connector, 250-ohm
+ M9400-YJ terminator
+ M9400-YJ Refs: uNOTE N#035
+
+ M9400-YK REV11-K Q M9400-YH with no terminators
+
+ M9400-YL REV11-L Q M9400-YH with cable connectors
+ M9400-YL Refs: uNOTE N#035
+
+ M9400-YM REV11-M Q Refresh with DECnet bootstrap
+
+ M9400-YN REV11-N Q RX02 boot and refresh
+
+ M9401 Q Mirror-image connector used at other end of cable
+ M9401 to M9400 to join 2 backplanes. 18-bit bus only,
+ M9401 No terminators.
+ M9401 BCV1A-XX = M9400-YD + M9401 + 2 x BC05L-XX cable
+ M9401 BCV1B-XX = M9400-YE + M9401 + 2 x BC05L-XX cable
+
+ M9404[-00] Q 1st Q22 bus cable connector, no terminators
+ M9404[-00] Used at end of cable nearest cpu.
+ M9404[-00] Refs: uNOTE N#035
+
+
+ M9404-YA Q Cable connector for expansion box, with 240-Ohm
+ M9404-YA terminators. Used at end of cable nearest to CPU.
+ M9404-YA BCV2C-XX = M9404-YA + M9405 + 2 x BC02D-XX cable
+ M9404-YA Refs: uNOTE N#035
+
+ M9405 Q 2nd Q22 bus cable connector, no terminators,
+ M9405 mirror image. Used at end of cable furthest from
+ M9405 CPU.
+ M9405 BCV2B-XX = M9404-00 + M9405-00 + 2 x BC02D-XX cable
+ M9405 Refs: uNOTE N#035
+
+ M9405-YA Q M9405 with 120-Ohm terminators. Used at end of
+ M9405-YA cable furthest from CPU.
+ M9405-YA BCV2A-XX = M9404-00 + M9405-YA + 2 x BC02D-XX cable
+ M9405-YA Refs: uNOTE N#035
+
+ M9405-YD Q M9405 with no terminators. Used at end of cable
+ M9405-YD furthest from cpu
+ M9405-YD Refs: uNOTE N#035
+
+ M9405-YE Q M9405 with 240-Ohm terminators. Used at end of
+ M9405-YE cable furthest from cpu
+ M9405-YE Refs: uNOTE N#035
+
+ M971 - H854 mounted on single card, accepts BC08R
+
+ M974 - Test Connector (DH11)
+
+ M9713-AA U 11/94 +5V and -15V minimum load module for KDJ11-E
+
+ M9715 ? 'paddle' board, connects to KA660
+
+ M992-YB U Bootstrap diode matrix
+
+ M9970 U M997, H854 Facing Edge (11/05)
+
+ W9301 U Quad-height hi-density wire wrappable module
+ W9301 Used for customer-designed and built boards.
+
+ W9302 U Hex-height hi-density wire wrappable module
+
+ W940 U Quad-height wire wrappable module,
+ W940 space for 50 14/16-pin ICs
+
+ W941 U Dual-height wire wrappable module,
+ W941 space for 25 14/16-pin ICs
+
+ W942 U W940 with IC sockets
+
+ W943 U W941 with IC sockets
+
+ W950 U Quad-height wire wrappable module,
+ W950 space for 30 14/16-pin and 8 24-pin ICs
+
+ W951 U Dual-height wire wrappable module,
+ W951 space for 15 14/16-pin and 4 24-pin ICs
+
+ W9511 Q Quad-height wire wrap module, no sockets
+
+ W9512 Q Dual-height wire wrap module, no sockets
+
+ W9513 Q W9511 with 58 pre-mounted DIP sockets
+
+ W9514 Q W9511 with 58 pre-mounted DIP sockets
+
+ W9515 Q W9512 with 25 pre-mounted DIP sockets
+
+ W952 U W950 with IC sockets
+
+ W953 U W951 with IC sockets
+
+ W960 U Single-height blank module with space for
+ W960 2 14/16-pin ICs or 1 24-pin IC
+
+ W964 U Blank terminator board
+
+ W968 U Quad-height blank module with space for
+ W968 72 14/16-pin ICs
+
+ W969 U Dual-height blank module with space for 36
+ W969 14/16-pin ICs
+
+ W970 U Single-height blank module
+
+ W971 U Dual-height blank module
+
+ W972 U Single-height blank module, copper clad
+
+ W9720 U Single-height blank module, copper clad
+
+ W9721 U Dual-height blank module, copper clad
+
+ W9722 U Quad-height blank module, copper clad
+
+ W973 U Dual-height blank module, copper clad
+
+ W974 U Single-height blank module, perforated
+
+ W975 U Dual-height blank module, perforated
+
+ W979 U Dual-height blank module with space for
+ W979 18 14/16-pin ICs
+
+ W982 U Single-height module extender
+
+ W984 U Dual-height module extender
+
+ W987 U Quad-height module extender
+
+ W990 U Single-height bare board, split lug terminals
+
+ W991 U Dual-height bare board, split lug terminals
+
+ W992 U Single-height blank module, copper clad
+
+ W993 U Dual-height blank module, copper clad
+
+ W998 U Single-height blank module, perforated
+
+ W999 U Dual-height blank module, perforated
+
+ BB11 BB11 U 4-slot blank mounting panel (backplane with UNIBUS
+ BB11 and power lines only)
+
+ DD11-A DD11-A U UNIBUS Backplane with 4 SPC slots
+
+ DD11-B DD11-B U UNIBUS Backplane with 4 SPC and 2 DF11 slots
+
+ DD11-C DD11-C U UNIBUS Backplane with 4 SPC slots
+
+ DD11-D DD11-D U UNIBUS Backplane with 9 SPC slots
+
+ DD11-PK DD11-PK U 9-Slot backplane for 11/04,34,34a
+
+ DDV11-B DDV11-B Q 6 x 9 Qbus backplane, Q18
+
+ DLV11-K DLV11-K - EIA to 20mA controller
+ DLV11-K (-KA, -KB)
+ DLV11-K Refs: EK-DLVKA-IN, MP-00694, EB-20175-20, uNOTE N#033
+
+ KXT11-LP KXT11-LP - Active Loopback connector (for use with KXT11-A)
+
+ RLV11 RLV11 Q RL01/02 disk controller option, consists of
+ RLV11 modules M8013 and M8014. Q/CD-only option.
+ RLV11 18-bit DMA only. Caution: uses BC1 and BD1
+ RLV11 for purposes other than BDAL18 and BDAL19
+ RLV11 Refs: EK-RLV11-TD, MP-00635, EB-20175-20
+
+ VSV11 VSV11 Q Raster Graphics option, consists of modules
+ VSV11 M7061, M7062 and M7064. Q/CD-only option.
+ VSV11 Refs: EK-VSVFQ-UG, MP-01012, EK-VT101-TM
+
+ #####
+
+
+ T H I R D P A R T Y O P T I O N L I S T
+
+ ------------------------------------------------------------------------------
+ MODULE OPTION BUS DESCRIPTION
+ ------ -------- --- --------------------------------------------------
+ 306A Q Grant Technology clock/calendar
+
+ 307 Q Grant Technology clock/calendar
+
+ 440 Q Data Systems Design (DSD) disk controller.
+ Emulates RXV21.
+
+ 880 Q Data Systems Design (DSD) disk controller.
+ Emulates Digital RLV12 and RXV21. Has on-board
+ boot code.
+
+ ACT DH/DM U Able Comput Technology 16 async communication line
+ controller with modem control. All standard DH11
+ baud rates, plus 19.2-Kbaud. Emulates DEC
+ DH11+DM11.
+
+ ADC-01 U Ampex controller for up to two SMD disks. Limited
+ to drives with low data rates and requires a
+ custom driver.
+
+ B01076 Q Baydel multi-function board
+
+ B01079-4 Q Baydel cartridge tage controller
+
+ BRX-50 Q Baydel 5.25" floppy disk controller
+
+ Buslink/Uni U Able Computer interprocessor communications
+ board, emulates DA11
+
+ Buslink/Q Q Able Computer interprocessor communications
+ board, emulates DA11
+
+ CQ1610 Q Dilog 16-line RS-232 communications controller.
+ Emulates DH11
+
+ CQ1620 Q Dilog 8-line RS-232 communications controller.
+ Emulates DHV11
+
+ CQ1622 Q Dilog 8-line RS-422 communications controller
+
+ CQ1640 Q Dilog 16-line RS-232 communications controller
+
+ CS01/H Q Emulex 16-64 line RS-422 communications controller.
+ Emulates 2-8 DHV11
+
+ CS02/H Q Emulex 16-line RS-422 communications controller.
+ Emulates 1 DH11 or 2 DHV11
+
+ CS04 Q Emulex 16-64-line RS-232/422 communications
+ controller. Emulates 2-8 DHV11s
+
+ CS08 Q Emulex 8-line RS-232 communications controller.
+ Emulates DHV11.
+
+ CS09 Q Emulex 16-line RS-232 communications controller.
+ Emulates 2 DH11
+
+ CS11 U Emulex 16-64 line RS-422 communications controller.
+ Emulates DH11, DMF32 or DV11
+
+ CS11/F U Emulex communications controller, 8-line RS-422
+ + 1 synch + 1 parallel. Emulates DMF32
+
+ CS11/H U Emulex 16-64 line RS-232 communications
+ controller. Emulates DH11?
+
+ CS11/U U Emulex 32-line synchronous/asynchronous
+ communications controller. Emulates DU11?
+
+ CS11/V U Emulex 32-line synchronous/asynchronous
+ communications controller. Emulates DV11
+
+ CS21/H U Emulex 16-line RS-232 communications controller.
+ Emulates DH11
+
+ CS21/U U Emulex 16-line RS-232 communications controller
+ Emulates DU11?
+
+ CS21/Z U Emulex 16-line RS-232 communications controller.
+ Emulates DZ11-E
+
+ CS23 U Emulex 12-32-line RS-232 communications controller.
+ Emulates DHU11
+
+ CS32/F U Emulex 16-128-line RS-232 communications controller.
+ Emulates DMF32
+
+ CTS11 Q Baydel QIC 2 .25" DC600A/DC300XL tape cartridge
+ drive controller. Registers are similar, but
+ not identical, to TSV05
+
+ CU1710 U Dilog asynchronous communications controller.
+ 16 Channels with modem control, emulates DHU11
+
+ DC7711 Q Fisher-Rosemount Provox process control system
+ Highway II interface (DHI)
+
+ 706131 DCV51 - Plessey disk controller for 1-4 MFM drives.
+ 706131 Supports ST251.
+
+ DH6215-DH1 Q Fisher-Rosemount Provox process control system
+ Data Highway interface
+
+ DHU/HS U Able Computer 16-port async RS-232 communications
+ board. Emulates DHU-11
+
+ Dual I/O U Able Computer general purpose parallel interface
+ Emulates 2 x DR11-C
+
+ DV/16 U Able Computer 16-port sync/async DMA communications
+ multiplexor with support for ADCCP, Bisync, DDCMP.
+ Emulates DV11
+
+ DZ/16 U Able Computer 16-port async multiplexor.
+ Emulates 2 x DZ11
+
+ DM01 Q Emulex ST506/ST412 disk controller. Emulates
+ RQDXn, SA540 5.25" floppy disk interface
+ emulates RX50. 22-bit bus.
+
+ DM02 Q Emulex ESDI disk controller. Emulates RQDXn,
+ SA540 5.25" floppy disk interface emulates RX50.
+ 22-bit bus.
+
+ DQ100 Q Dilog disk controller emulating Digital RK05
+ (supports Diablo 31)
+
+ DQ120 Q Dilog DU120 tape controller
+
+ DQ130 Q Dilog DU120 tape controller. Emulates TM11.
+ 4 Drives. Pertec I/O
+
+ DQ132 Q TS-11 emulation for Pertec formatted tape, up to
+ 4 drives. Q22. Dilog. Replaced by DQ142.
+
+ DQ142 Q Dilog .5" reel-to-reel tape drive controller for
+ TU80 and CDC 92185. Emulates TS11. Replaced
+ (with restrictions) by DQ152
+
+ DQ152 Q Dilog .5" reel-to-reel tape drive controller
+ Pertec I/O
+
+ DQ153 Q TMSCP emulation for Pertec formatted tape, up to
+ 4 drives, LSI-11 boot, LSI-11 & VAX config
+ programme & diagnostics in ROM, NVRAM config
+ settings. Q22. Dilog.
+
+ DQ200 Q Dilog disk controller. Emulates extended
+ RK11/RK05 (supports CDC 9448-96)
+
+ DQ202A Q Dilog disk controller. Emulates RP11/RP02/03
+ (Supports CDC 9715-160 and Fujitsu 2284)
+
+ DQ215 Q Dilog disk controller. Emulates RK711/RK07
+ (Supports CDC 9715-160)
+
+ DQ235 Q Dilog disk controller. Emulates RK611/RK06
+ (supports SSM 096)
+
+ DQ236 Q Dilog 4 x SMD 20Mhz disk controller.
+ Replaced by DQ256.
+
+ DQ246 Q Dilog 4 x SMD/ESMD disk controller. Emulates
+ MSCP. (Supports Fujitsu 2333). Replaced by
+ DQ256.
+
+ DQ256 Q Dilog 24 Mhz SMD disk controller, Emulates MSCP,
+ 4 drives. Replaces DQ246
+
+ DQ302 Q Dilog QIC-02 .25" cartridge tape drive interface
+ Emulates TM11.
+
+ DQ322 Q Dilog QIC-02 .25" cartridge tape controller,
+ Emulates TM11
+
+ DQ3256 Q Dilog 24 MHz SMD disk controller. Emulates MSCP.
+ BA4000
+
+ DQ330 Q Dilog Kennedy 6450 cartridge tape controller
+
+ DQ3686 Q Dilog 20 MHz ESDI & SA450 disk controller.
+ Emulates MSCP. BA4000. Replaced by MQ3686
+
+ DQ409 Q Dilog 8" DSDD floppy disk controller
+
+ DQ419 Q Dilog floppy disk controller, SA850,
+ Emulates RX01/RX02
+
+ DQ606 Q Dilog floppy disk controller, SA450,
+ Emulates RX33/50
+
+ DQ614 Q Dilog ST-506/412 emulation of four RL01/02
+
+ DQ616 Q Dilog 4 x ST506/ST412 (MFM) disk controller for uVAX
+ Emulates MSCP. Replaced by MQ606.
+
+ DQ619 Q Dilog floppy disk drive controller. Emulates
+ RXV21/RX02. Shugart SA450 compatible, DSD or
+ Dilog media compatible, supports two drives.
+ 22-bit addresssing capability
+
+ DQ686 Q Dilog 4 x ESDI disk controller. Emulates
+ MSCP. Replaced (with restrictions) by DQ696.
+
+ DQ696 Q Dilog 2 x ESDI disk controller. Emulates MSCP.
+ (supports Fujitsu 2333)
+
+ DR-216 Q Dataram 256kb/512kb/1Mb/2Mb memory
+
+ DR-224 Q Dataram 8Mb memory for uVAX
+
+ DR-244 Q Dataram 1Mb memory for uVAX
+
+ DR-275 ? Dataram 1Mb memory for VAX 11/750
+
+ DR-278 ? Dataram 1-4Mb memory for VAX 11/780
+
+ DR-283 Q Dataram 1/2/4Mb memory for uPDP-11
+
+ DR-286 ? Dataram 4-16Mb memory for VX8600/8650
+
+ DSC-RQD11-SCH Q Sigma disk controller (supports CDC XMD850)
+
+ DSC-RQD11A/C Q Sigma MFM disk controller. Emulates RQDX2
+ (supports Seagate 251-4)
+
+ DT2752 ? Data Translation A/D board. Newer version of DT2782
+ with burst/increment mode problems fixed
+
+ DT2762 ? Data Translation A/D board
+
+ DT2764 ? Data Translation A/D board
+
+ DT2782 ? Data Translation A/D board
+
+ DT2784 ? Data Translation A/D board
+
+ DU132 U Dilog .5" magtape interface. Emulates TM11.
+ 4 drives. Pertec formatted I/O. Replaced
+ by DU142.
+
+ DU142 U Dilog .5" magtape interface. Emulates TM11.
+ 4 drives. Pertec formatted I/O
+
+ DU236 U Dilog SMD disk controller. Emulates MSCP.
+ Replaced by DU256.
+
+ DU256 U Dilog 24 Mhz SMD disk controller, Emulates MSCP,
+ 4 drives.
+
+ DU312 U Dilog .5" magtape interface
+
+ DU686 U Dilog 4 x ESDI disk controller. Emulates MSCP.
+
+ ESDC Q Andromeda ESDI disk controller. Emulates MSCP.
+ (Supports CDC 94196-766, Fujitsu M2263E,
+ Hitachi DK515-78, and Seagate 442)
+
+ FP105 Q Able Computer 128-port async RS-232 communications
+ board. Emulates 16 x DHV11 or 16 x CXY08
+
+ FP106 Q Able Computer 128-port async RS-232 communications
+ board. Emulates 8 x CXA16
+
+ Interlink/Uni U Able Computer general purpose DMA interface
+ Replaces DR11-B
+
+ Interlink/Q Q Able Computer general purpose DMA interface
+ Replaces DR11-B
+
+ MLSI-TM11 Q MDB 800/1600 BPI Pertec unformatted magtape
+ (3-cable) formatter/controller. Emulates TM11
+
+ MLV11 Q General Robotics multifunction module,
+ 128k RAM + 2 serial RS232 I/O
+
+ MQ100 Q Dilog multifunction board
+
+ MQ3686 Q Dilog 20 Mhz ESDI & SA450 disk controller,
+ Emulates MSCP, BA4000, Replaces DQ3686
+
+ MQ686 Q Dilog disk controller. Emulates MSCP & RX33/50.
+ 4 x ESDI drives + 2 x floppy drives
+
+ MQ696 Q Dilog disk controller. Emulates MSCP & RX33/50.
+ 2 x ESDI drives + 2 x SA450 floppy drives
+
+ MQ759 Q Dilog disk/tape adapter. Emulates MSCP & TMSCP.
+ SA450 port, RX33/50 compatible, 7 x SCSI devices
+ + 2 SA450 floppy drives
+
+ MSV11-Q Q General Robotics 1Mb 22-bit memory for uPDP-11
+
+ MSV11-R Q General Robotics 4Mb 22-bit memory, MSV11-P
+ compatible
+
+ MWV11-A Q Baydel ST506/MFM disk controller.
+ Caution: backplane must not use BC1-BE1 for
+ purposes other than BDAL18-21
+
+ NS23S Q National Semiconductor 4k or 4Mb x 18-bit memory
+
+ PM-CCV11A Q Plessey .25" tape cartridge (CDV11A) interface
+
+ PM-DCV11A Q Plessey disk controller emulating Digital RK05
+ (supports Diablo 30)
+
+ PM-DRV11 Q Plessey parallel interface
+
+ PM-FCV21B Q Plessey SASI interface, controlling MFM disk(s)
+ emulates 4 x RL02 via a formatter
+
+ PM-MFV11A Q Plessey multifunction module: 1 RS-232 (console)
+ port, front panel control, bootstrap ROMs,
+ programmable line time clock, Qbus terminator
+
+ PM-SV128A Q Plessey 128k memory for uPDP-11
+
+ PM-WSV31 Q Plessey 8" DSDD floppy disk controller, RX02 compat.
+
+ Q984 Q AEG (Modicon) Modbus Plus programmable controller
+
+ QD01/D Q Emulex ST506 disk controller. Emulates KDA50.
+ 22-bit bus.
+
+ QD21 Q Emulex ESDI disk controller. Emulates MSCP.
+ Has LSI-11 boot, LSI-11 & VAX config and
+ diagnostic programmes in ROM, NVRAM config
+ settings. Q22.
+
+ QD24 Q Emulex ESDI disk controller. Emulates MSCP.
+ For VAX 3500/3600.
+
+ QD25 Q Emulex ESDI disk controller. Emulates MSCP.
+ (Supports CDC 766)
+
+ QD32 Q Emulex SMD-E disk controller. Emulates MSCP.
+ Diagnostic and setup programmes in ROM. NVRAM
+ config settings. Q22.
+
+ QD33 Q Emulex SMD controller for up to two SMD disks.
+ Supports SMD-0 and SMD-E, with data rates up to
+ 24MHz for SMD-E. MSCP emulation. DMA (uses
+ adaptive techniques and block mode, supports
+ scatter-write and gather-read on the uVAX-I).
+
+ QD34 Q Emulex SMD-E disk controller. Emulates MSCP.
+ For VAX 3500/3600.
+
+ QD35 Q Emulex disk controller. Emulates MSCP
+ (Supports Fujitsi M2333)
+
+ Q/DHU Q Able Computer 8/16-port async RS-232 communications
+ board. Emulates DH11 and DM11, speeds to 38.4kb
+
+ QHV Q Able Computer 8-port async RS-232 communications
+ board. Emulates DHV11
+
+ QHV+ Q Able Computer 16-port async RS-232 communications
+ board. Emulates DHV11, data only
+
+ QS09 Q Emulex 16-line RS-232 communications controller
+ for VAX 3500/3600. Emulates 2 x CXY08.
+
+ QT13 Q Emulex tape controller. Emulates TSV05 or TMSCP.
+ 0.5" tape at 800, 1600, 3200, or 6250bpi.
+
+ QT14 Q Emulex tape controller. Emulates TSV05 or TMSCP.
+ 0.5" tape at 800, 1600, 3200, or 6250bpi.
+ For VAX 3500/3600.
+
+ QuadrAsync/B U Able Computer async RS-232 communications board
+ Emulates 4 x DL11-B
+
+ QuadrAsync/C U Able Computer async 20mA communications board
+ Emulates 4 x DL11-C
+
+ QuadrAsync/E U Able Computer async RS-232 communications board
+ with modem control. Emulates 4 x DL11-E
+
+ RDC-16 Q See First Technology, MSCP Ram Disk, 16MB
+
+ RDE-32 Q See First Technology, 32MB extender for RDC-16
+
+ RQD11 Q Sigma disk controller (Supports Fujitsu 2246E)
+ -DESDI
+
+ RQD11-ECP Q Sigma ESDI disk controller
+ (Supports CDC 94196-766 and Hitachi DK515-78)
+
+ RQD11/EC Q Sigma ESDI disk controller (= Webster WQESD/4)
+ (Supports 760Mb Maxtor XT8760E)
+
+ RQD11/SCH Q Sigma disk controller (Supports CDC XMD850)
+
+ Rebus U Able Computer Unibus repeater, replaces DB11-A/H
+
+ SBCM70 Q LSI-11 with 4 RS-232 lines, DLV11-J compatible,
+ and 512kb-2Mb memory
+
+ SBCM71 Q LSI-11 with 4 RS-232 lines, DLV11-J compatible,
+ and 256kb-2Mb memory
+
+ SC01 Q Emulex disk controller
+
+ SC02/A Q Emulex SMD disk controller. Emulates Digital
+ RP11/RP02/RP03. Includes BDV11-compatible
+ line-time clock.
+
+ SC02/B Q Emulex SMD disk controller. Emulates Digital
+ RH11/RM02/RM03.
+
+ SC02/C Q Emulex SMD disk controller. Emulates Digital
+ RK611/RK06/RK07. 22-bit. Supports Fujitsu 2322.
+ Includes BDV11-compatible line-time clock.
+
+ SC02/L Q Emulex SMD disk controller. Emulates Digital
+ RLV11/RL01/RL02. 22-bit. Includes BDV11-compatible
+ line-time clock.
+
+ SC02/M Q Emulex SMD disk controller. Emulates ???
+ Includes BDV11-compatible line-time clock.
+
+ SC03 Q Emulex SMD disk controller. Emulates RM11/RM03
+ Includes BDV11-compatible line-time clock.
+
+ SC03/BX Q Emulex SMD disk controller. Emulates
+ RH11/RH70/RM02/RM05/RM80/RP06
+ Includes BDV11-compatible line-time clock.
+
+ SC11 U Emulex disk controller
+
+ SC12/A U Emulex SMD disk controller. Emulates
+ RP11E/RP02/RP03
+
+ SC12/C U Emulex SMD disk controller. Emulates RK611/RK06.
+ Supports CDC 9730-80 & 9448-96, and Priam 3350.
+
+ SC12/L U Emulex SMD disk controller. Emulates ????
+
+ SC12/M U Emulex SMD disk controller. Emulates MSCP
+
+ SC12/V U Emulex SMD disk controller for VAX. Emulates
+ RK711/RK07. Supports CDC 9730-80 & 9448-96,
+ and Priam 3350.
+
+ SC21/B U Emulex SMD disk controller. Emulates RH11/RM02
+
+ SC21/BM U Emulex SMD disk controller. Emulates RJM02/RJM05
+
+ SC21/B2 U Emulex SMD disk controller. Emulates RJP06
+
+ SC21/BE U Emulex SMD disk controller. Emulates RJM02/RJM05
+
+ SC21/BX U Emulex disk controller
+
+ SC21/C U Emulex SMD disk controller. Emulates RK611/RK06
+
+ SC21/V U Emulex SMD disk controller for vax. Emulates
+ RM03/RM05. Needs Emulex VAX/UM software.
+
+ SC31/BX U Emulex SMD disk controller. Emulates
+ RH11/RM02/RM03/RM05/RP06. Needs Emulex VAX/UM
+ software to use on VAX. Supports Fujitsu Eagle.
+
+ SC72/BX U Emulex SMD/MMD disk controller for PDP-11/70 only.
+ Emulates RH70/RM02/RM03/RM05/RP06/RM80.
+
+ SC750/B1 S Emulex 1-4 SMD disk controller for VAX-11/750 only.
+ Emulates RH750/RP06.
+
+ SC750/B2 S Emulex 1-4 SMD disk controller for VAX-11/750 only.
+ Emulates RH750/RP06. Supports Fujitsu Eagle, and
+ Memorex 677.
+
+ SC750/B3 S Emulex 1-4 SMD disk controller for VAX-11/750 only.
+ Emulates RM03. Supports CDC 9762, 9730-80, DM 980,
+ (730-160, and Fujitsu 2248
+
+ SC758/B1 C Emulex 1-8 SMD disk controller for VAX-11/750 only.
+ Emulating RM03 and RM05.
+
+ SC7000/B1 C Emulex 1-4 SMD disk controller for VAX-11/750 and
+ 11/780 (requires V-MASTER). Emulates
+ RM03/RM05/RM80. Supports CDC (762, (710,
+ 9715-160, 9766, 9715-340, 9715-500, 9771, 9775,
+ & 9730-160, CDS T302RM, DF 9330, and Fujitsu 2284,
+ 2294, 2312, 2351A.
+
+ SC7003 C Emulex 1-4 SMD/SMD-E disk controller for VAX-11/750
+ and 11/780 (requires V-MASTER).
+ Emulates RM02/RM03/RM05/RM80.
+
+ SC780 S Emulex disk controller for VAX-11/780.
+ Emulates RM03/RM05/RM80/RP06
+
+ SC788/B1 S Emulex SMD disk controller for VAX-11/780.
+ Emulates RM03/RM05/RM80/RP06
+
+ SCAT/45 U Able Computer 256k static MOS memory
+ Replaces MS11-A/-B/-C
+
+ SCDC-11 Q Andromeda SCSI controller. Emulates MSCP.
+
+ SDC-DLV11J Q Sigma clone of DLV11-J. 4-line SLU.
+
+ SDC-RLV12 Q Sigma Disk controller. Emulates RLV12/RL02
+ (Supports Rodime R204)
+
+ SDC-RQD11 Q Sigma MSCP/ESDI Winchester disk controller
+ -EC
+
+ SDC-RXV31 Q Sigma floppy disk controller. Emulates RXV21/RX02.
+ (Supports Mitsubishi M2696-63)
+
+ SDC-DLV11J Q Sigma clone of DLV11-J. 4-line SLU.
+
+ SM696 Q Dilog disk/tape controller. Emulates MSCP &
+ RX33/50 + 2 x ESDI drives + 2 x SA450 drives
+
+ SMDC Q Andromeda disk controller. Emulates MSCP.
+ (Includes Fujitsu 2312 and CDC Elite & Sabre)
+
+ SPE44 - Emulex port expander. Interfaces multiple VAXes
+ to a single bank of SMD-compatible drives.
+
+ SQ3153 Q Dilog tape coupler 1/2" Pertec formatted I/O.
+ Emulates TMSCP, 4 drives, BA4000
+
+ SQ3703A Q Dilog SCSI tape adapter. Emulates TMSCP. BA4000.
+ Replaced by SQ3709
+
+ SQ3706A Q Dilog SCSI disk adapter. Emulates MSCP. BA4000.
+ Replaced by SQ3709
+
+ SQ3709 Q Dilog SCSI disk/tape adapter. Emulates MSCP
+ and TMSCP. 7 x SCSI devices, BA4000. Replaces
+ SQ3703A & SQ3706A
+
+ SQ3723A Q Dilog SCSI differential tape adapter. BA4000.
+ Emulates TMSCP. BA4000
+
+ SQ3726A Q Dilog SCSI differential disk adapter.
+ Emulates MSCP.
+
+ SQ703A Q Dilog SCSI tape adapter. Emulates TMSCP
+ Replaced by SQ739
+
+ SQ706A Q Dilog SCSI disk adapter. Emulates MSCP.
+ Replaced by SQ739
+
+ SQ713A Q Dilog SCSI differential tape adapter.
+ Emulates TMSCP
+
+ SQ706 Q Dilog SCSI disk controller for Ramstor 5150
+
+ SQ739 Q Dilog disk/tape adapter. Emulates MSCP & TMSCP.
+ 7 x SCSI devices. Replaces SQ703A and SQ706A
+
+ SQ85 Q AEG (Modicon) Modbus Plus communications card
+
+ STBC Q Baydel multi-function module. 22-bit
+ terminator/bootstrap/line clock/powerfail/control
+ panel.
+
+ SU723A U Dilog SCSI tape adapter. Emulates TMSCP. 7 drives
+
+ SU726A U Dilog SCSI disk adapter. Emulates MSCP. 7 drives
+
+ TC-130 U Western Peripherals tape controller and formatter.
+ 4 UNIBUS modules in a system unit. Interfaces with
+ industry standard non-formatted drives and
+ emulates a TU10.
+
+ TC01 Q Emulex .5" reel-to-reel tape controller.
+ Emulates TU10
+
+ TC01/N Q Emulex .5" reel-to-reel tape controller,
+
+ TC01/P Q Emulex .5" reel-to-reel tape controller,
+
+ TC02 Q Emulex Pertec-interface tape drive controller.
+ Emulates TS11. Early revisions incompatible
+ with VMS.
+
+ TC02 Q Emulex Pertec-interface tape drive controller.
+ Emulates TS11. Early revisions incompatible
+ with VMS. Supports 1-4 Cipher F880, CDC 92181,
+ Kennedy 6809, and Pertec F1000.
+
+ TC02/FS Q Emulex .5" reel-to-reel tape controller,
+
+ TC05 Q Emulex CDC Sentinel .25" cartridge tape controller.
+ Emulates TS11. Supports CDC 92192 Sentinel.
+
+ TC05/SX Q Emulex .5" reel-to-reel tape controller.
+
+ TC11/N U Emulex .5" reel-to-reel tape controller.
+ Emulating TM11/TU10.
+
+ TC11/P U Emulex .5" reel-to-reel tape controller.
+ Emulating TM11/TU10.
+
+ TC11/V U Emulex .5" reel-to-reel tape controller.
+ Emulates MT11/TU10. Needs Emulex VAX/UT software.
+
+ TC12 U Emulex .5" reel-to-reel tape controller.
+ Emulates TS11. 22-bit. Supports 1-4 Cipher F880,
+ CDC 92181, Kennedy 6809, and Pertec F1000.
+
+ TC12/FS U Emulex .5" reel-to-reel tape controller,
+
+ TC13 Q Emulex Pertec-interface tape drive controller.
+ Switchable TU81 TMSCP or TS11 emulation.
+
+ TC13 U Emulex Pertec-interface tape drive controller.
+ Switchable TU81 TMSCP or TS11 emulation. Supports
+ 1-4 Cipher F880, CDC 92181, Kennedy 6809, and
+ Pertec F1000.
+
+ TC15 U Emulex CDC Sentinel .25" cartridge tape controller.
+ Emulating Digital TS11. Supports CDC 92192 Sentinel.
+
+ TC15/SX U Emulex CDC Sentinel .25" cartridge tape controller,
+
+ TC-130 U Western Peripherals tape controller and formatter.
+ 4 UNIBUS modules in a system unit. Interfaces with
+ industry standard non-formatted drives and emulates
+ a TU10.
+
+ TC7000 C Emulex .5" reel-to-reel tape controller for
+ VAX-11/750 & 11/780 (with V-MASTER).
+ Emulates TGU77/TEU77. 1-8 Pertec interface drives
+ or 1-4 STC interface drives.
+
+ TS0100 Q PICO-bus interface for Kennedy 6455 .25"
+ tape cartridge (DC300/DC600)
+
+ UC01/LX Q Emulex SCSI bus adaptor. Emulates 1-4 RL01/RL02.
+ 22-bit. Includes BDV11-compatible line-time clock
+ and sockets for bootstrap ROMs and bus terminators.
+
+ UC02 Q Emulex SCSI bus (ANSI X3T9.2) adaptor.
+ Emulates MSCP controller for 1-4 disks. 22-bit.
+
+ UC03 Q Emulex SCSI bus adaptor. Emulates MSCP controller
+
+ UC04 Q Emulex SCSI bus adaptor. Emulates MSCP controller
+
+ UC06D Q Emulex SCSI bus adaptor.
+
+ UC07D Q Emulex single SCSI bus adaptor.
+
+ UC08-2 Q Emulex dual SCSI bus adaptor.
+
+ UC12 U Emulex SCSI bus adaptor. Emulates MSCP controller
+
+ UC13 U Emulex SCSI bus adaptor. Emulates MSCP controller
+
+ UC14 U Emulex SCSI bus adaptor. Emulates MSCP controller
+
+ UD23 U Emulex ESDI disk controller. Emulates UDA50.
+
+ UD33 U Emulex SMD-E disk controller. Emulating UDA50.
+
+ V-MASTER S Emulex interface enabling use of SC7000/B1,
+ SC7003, and TC7000 on VAX-11/780.
+
+ VMZ/32 U Able Computer 16-port async RS-232 communications
+ board. Emulates async ports (only) of DMF32
+
+ WDC-11 Q Andromeda controller for Seagate ST251-1
+ (emulates 2 x RL02)
+
+ WQESD/4 Q Webster ESDI disk controller (= Sigma RQD11/EC)
+ (Supports 760Mb Maxtor XT8760E)
+
+
+ XCV21/31 Q Plessey QumeTrak 8" floppy disk controller
+
+ QTO Q TD Systems SCSI TMSCP tape controller, LSI-11 &
+ VAX config and diagnostic programmes in ROM,
+ NVRAM config settings. Q22.
+
+ -*-EndText-*-
--- /dev/null
+#(kHz) (UNIXtime) (dBm)
+Freq Time Amplitude
+# Starting Repetition: 1
+9250 1349682519 -095.996
+9251 1349682527 -093.898
+9252 1349682535 -094.003
+9253 1349682543 -094.281
+9254 1349682551 -099.302
+9255 1349682559 -099.425
+9256 1349682567 -098.730
+9257 1349682575 -098.699
+9258 1349682583 -098.892
+9259 1349682591 -099.237
+9260 1349682599 -099.086
+9261 1349682607 -098.097
+9262 1349682615 -097.048
+9263 1349682623 -096.383
+9264 1349682631 -097.065
+9265 1349682639 -097.597
+9266 1349682647 -096.454
+9267 1349682655 -096.896
+9268 1349682663 -097.239
+9269 1349682671 -098.596
+9270 1349682679 -098.245
+9271 1349682687 -098.354
+9272 1349682695 -098.420
+9273 1349682703
+9274 1349682711 -098.641
+9275 1349682719 -098.806
+9276 1349682727 -098.194
+9277 1349682735 -098.777
+9278 1349682743 -098.702
+9279 1349682751 -098.857
+9280 1349682759 -098.597
+9281 1349682767 -094.970
+9282 1349682775 -094.825
+9283 1349682783 -094.515
+9284 1349682791 -098.169
+9285 1349682799 -098.493
+9286 1349682807 -099.092
+9287 1349682815 -098.957
+9288 1349682823 -099.182
+9289 1349682831 -098.744
+9290 1349682839 -098.474
+9291 1349682847 -098.461
+9292 1349682855 -098.827
+9293 1349682863 -098.352
+9294 1349682871 -098.789
+9295 1349682879 -098.521
+9296 1349682887 -098.331
+9297 1349682895 -098.124
+9298 1349682903 -098.167
+9299 1349682911 -097.867
+9300 1349682919 -097.961
+9301 1349682927 -097.667
+9302 1349682935 -097.571
+9303 1349682943 -097.973
+9304 1349682951 -096.585
+9305 1349682959 -095.979
+9306 1349682967 -095.067
+9307 1349682975 -094.579
+9308 1349682983 -095.339
+9309 1349682991 -096.182
+9310 1349682999 -095.969
+9311 1349683007 -096.454
+9312 1349683015 -096.296
+9313 1349683023 -092.513
+9314 1349683031 -092.473
+9315 1349683039 -092.566
+9316 1349683047 -095.555
+9317 1349683055 -095.261
+9318 1349683063 -095.045
+9319 1349683071 -094.332
+9320 1349683079 -094.154
+9321 1349683087 -094.144
+9322 1349683095 -095.215
+9323 1349683103 -096.051
+9324 1349683111 -096.125
+9325 1349683119 -096.339
+9326 1349683127 -096.671
+9327 1349683135 -096.595
+9328 1349683143 -084.334
+9329 1349683151 -084.769
+9330 1349683159 -084.899
+9331 1349683167 -096.307
+9332 1349683175 -096.439
+9333 1349683183 -096.827
+9334 1349683191 -096.778
+9335 1349683199 -097.088
+9336 1349683207 -097.146
+9337 1349683215 -097.006
+9338 1349683223 -097.133
+9339 1349683231 -097.187
+9340 1349683239 -097.661
+9341 1349683247 -097.680
+9342 1349683255 -098.030
+9343 1349683263 -097.879
+9344 1349683271 -097.646
+9345 1349683279 -097.357
+9346 1349683287 -097.205
+9347 1349683295 -097.121
+9348 1349683303 -097.089
+9349 1349683311 -096.327
+9350 1349683319 -096.355
+9351 1349683327 -096.178
+9352 1349683335 -096.511
+9353 1349683343 -097.124
+9354 1349683351 -097.278
+9355 1349683359 -097.593
+9356 1349683367 -097.867
+9357 1349683375 -098.040
+9358 1349683383 -094.085
+9359 1349683391 -091.154
+9360 1349683399 -091.091
+9361 1349683407 -093.191
+9362 1349683415 -098.415
+9363 1349683423 -098.198
+9364 1349683431 -098.464
+9365 1349683439 -098.429
+9366 1349683447 -098.619
+9367 1349683455 -099.239
+9368 1349683463 -099.519
+9369 1349683471 -099.312
+9370 1349683479 -099.236
+9371 1349683487 -099.354
+9372 1349683495 -099.182
+9373 1349683503 -099.144
+9374 1349683511 -093.150
+9375 1349683519 -092.115
+9376 1349683527 -092.231
+9377 1349683535 -096.074
+9378 1349683543 -098.600
+9379 1349683551 -098.992
+9380 1349683559 -099.159
+9381 1349683567 -099.800
+9382 1349683575 -099.303
+9383 1349683583 -099.481
+9384 1349683591 -099.213
+9385 1349683599 -098.860
+9386 1349683607 -098.951
+9387 1349683615 -098.775
+9388 1349683623 -096.925
+9389 1349683631 -081.655
+9390 1349683639 -080.925
+9391 1349683647 -082.773
+9392 1349683655 -097.352
+9393 1349683663 -096.284
+9394 1349683671 -096.553
+9395 1349683679 -097.836
+9396 1349683687 -100.274
+9397 1349683695 -098.244
+9398 1349683703 -098.232
+9399 1349683711 -098.799
+9400 1349683719 -100.713
+9401 1349683727 -100.883
+9402 1349683735 -100.571
+9403 1349683743 -100.217
+9404 1349683751 -100.826
+9405 1349683759 -101.236
+9406 1349683767 -099.648
+9407 1349683775 -099.782
+9408 1349683783 -100.752
+9409 1349683791 -101.479
+9410 1349683799 -101.554
+9411 1349683807 -101.533
+9412 1349683815 -101.595
+9413 1349683823 -101.803
+9414 1349683831 -101.579
+9415 1349683839 -101.277
+9416 1349683847 -099.495
+9417 1349683855 -098.009
+9418 1349683863 -098.881
+9419 1349683871 -096.391
+9420 1349683879 -091.410
+9421 1349683887 -092.032
+9422 1349683895 -093.649
+9423 1349683903 -100.361
+9424 1349683911 -100.092
+9425 1349683919 -099.700
+9426 1349683927 -099.333
+9427 1349683935 -099.377
+9428 1349683943 -099.087
+9429 1349683951 -099.214
+9430 1349683959 -098.811
+9431 1349683967 -097.974
+9432 1349683975 -097.982
+9433 1349683983 -097.932
+9434 1349683991 -098.110
+9435 1349683999 -093.041
+9436 1349684007 -093.121
+9437 1349684015 -092.891
+9438 1349684023 -097.547
+9439 1349684031 -097.433
+9440 1349684039 -097.288
+9441 1349684047 -097.184
+9442 1349684055 -096.924
+9443 1349684063 -097.321
+9444 1349684071 -097.125
+9445 1349684079 -097.928
+9446 1349684087 -097.960
+9447 1349684095 -098.038
+9448 1349684103 -097.689
+9449 1349684111 -097.543
+9450 1349684119 -085.668
+9451 1349684127 -085.355
+9452 1349684135 -085.609
+9453 1349684143 -096.791
+9454 1349684151 -096.714
+9455 1349684159 -096.749
+9456 1349684167 -097.640
+9457 1349684175 -097.914
+9458 1349684183 -097.986
+9459 1349684191 -097.766
+9460 1349684199 -097.571
+9461 1349684207 -097.611
+9462 1349684215 -097.374
+9463 1349684223 -097.307
+9464 1349684231 -097.750
+9465 1349684239 -097.517
+9466 1349684247 -097.659
+9467 1349684255 -097.756
+9468 1349684263 -097.019
+9469 1349684271 -095.269
+9470 1349684279 -095.318
+9471 1349684287 -095.351
+9472 1349684295 -096.834
+9473 1349684303 -096.748
+9474 1349684311 -096.272
+9475 1349684319 -086.846
+9476 1349684327 -087.789
+9477 1349684335 -087.195
+9478 1349684343 -097.269
+9479 1349684351 -097.254
+9480 1349684359 -097.399
+9481 1349684367 -096.943
+9482 1349684375 -097.031
+9483 1349684383 -096.973
+9484 1349684391 -098.193
+9485 1349684399 -098.402
+9486 1349684407 -098.130
+9487 1349684415 -097.394
+9488 1349684423 -097.804
+9489 1349684431 -097.483
+9490 1349684439 -097.590
+9491 1349684447 -097.713
+9492 1349684455 -097.900
+9493 1349684463 -097.601
+9494 1349684471 -097.836
+9495 1349684479 -097.786
+9496 1349684487 -093.225
+9497 1349684495 -093.346
+9498 1349684503 -093.551
+9499 1349684511 -097.785
+9500 1349684519 -097.643
+9501 1349684527 -097.831
+9502 1349684535 -097.863
+9503 1349684543 -098.055
+9504 1349684551 -097.865
+9505 1349684559 -098.199
+9506 1349684567 -098.317
+9507 1349684575 -098.065
+9508 1349684583 -098.284
+9509 1349684591 -098.267
+9510 1349684599 -098.137
+9511 1349684607 -086.241
+9512 1349684615 -085.068
+9513 1349684623 -085.351
+9514 1349684631 -097.303
+9515 1349684639 -097.516
+9516 1349684647 -097.325
+9517 1349684655 -097.845
+9518 1349684663 -097.932
+9519 1349684671 -097.851
+9520 1349684679 -097.729
+9521 1349684687 -097.856
+9522 1349684695 -097.581
+9523 1349684703 -097.967
+9524 1349684711 -097.832
+9525 1349684719 -097.847
+9526 1349684727 -097.927
+9527 1349684735 -098.023
+9528 1349684743 -098.047
+9529 1349684751 -098.453
+9530 1349684759 -098.367
+9531 1349684767 -098.407
+9532 1349684775 -098.270
+9533 1349684783 -098.445
+9534 1349684791 -098.362
+9535 1349684799 -098.308
+9536 1349684807 -098.147
+9537 1349684815 -098.424
+9538 1349684823 -099.155
+9539 1349684831 -099.388
+9540 1349684839 -098.997
+9541 1349684847 -098.980
+9542 1349684855 -098.400
+9543 1349684863 -098.677
+9544 1349684871 -098.531
+9545 1349684879 -099.004
+9546 1349684887 -099.353
+9547 1349684895 -098.937
+9548 1349684903 -098.933
+9549 1349684911 -098.837
+9550 1349684919 -099.153
+9551 1349684927 -099.151
+9552 1349684935 -099.143
+9553 1349684943 -099.386
+9554 1349684951 -099.507
+9555 1349684959 -099.259
+9556 1349684967 -099.243
+9557 1349684975 -094.092
+9558 1349684983 -094.202
+9559 1349684991 -094.105
+9560 1349684999 -098.540
+9561 1349685007 -098.664
+9562 1349685015 -096.328
+9563 1349685023 -095.278
+9564 1349685031 -095.611
+9565 1349685039 -096.661
+9566 1349685047 -098.533
+9567 1349685055 -098.788
+9568 1349685063 -098.895
+9569 1349685071 -098.961
+9570 1349685079 -098.410
+9571 1349685087 -096.337
+9572 1349685095 -089.647
+9573 1349685103 -088.623
+9574 1349685111 -088.777
+9575 1349685119 -098.367
+9576 1349685127 -097.834
+9577 1349685135 -096.297
+9578 1349685143 -094.989
+9579 1349685151
+9580 1349685159
+9581 1349685167 -076.690
+9582 1349685175
+9583 1349685183 -097.498
+9584 1349685191 -097.390
+9585 1349685199 -095.324
+9586 1349685207 -097.687
+9587 1349685215 -097.662
+9588 1349685223 -097.824
+9589 1349685231 -097.912
+9590 1349685239 -097.929
+9591 1349685247 -098.219
+9592 1349685255 -097.807
+9593 1349685263 -097.404
+9594 1349685271 -097.052
+9595 1349685279 -087.675
+9596 1349685287 -091.955
+9597 1349685295 -088.256
+9598 1349685303 -098.072
+9599 1349685311 -097.837
+9600 1349685319 -097.429
+9601 1349685327 -097.192
+9602 1349685335 -097.689
+9603 1349685343 -097.795
+9604 1349685351 -097.988
+9605 1349685359 -098.018
+9606 1349685367 -098.285
+9607 1349685375 -098.076
+9608 1349685383 -098.095
+9609 1349685391 -098.156
+9610 1349685399 -098.473
+9611 1349685407 -098.281
+9612 1349685415 -098.204
+9613 1349685423 -098.286
+9614 1349685431 -098.202
+9615 1349685439 -098.139
+9616 1349685447 -098.189
+9617 1349685455 -098.405
+9618 1349685463 -094.752
+9619 1349685471 -094.729
+9620 1349685479 -094.894
+9621 1349685487 -098.633
+9622 1349685495 -098.681
+9623 1349685503 -099.010
+9624 1349685511 -099.035
+9625 1349685519 -098.852
+9626 1349685527 -099.047
+9627 1349685535 -098.830
+9628 1349685543 -099.241
+9629 1349685551 -099.278
+9630 1349685559 -100.118
+9631 1349685567 -099.981
+9632 1349685575 -100.069
+9633 1349685583 -094.860
+9634 1349685591 -093.737
+9635 1349685599 -093.958
+9636 1349685607 -097.807
+9637 1349685615 -100.065
+9638 1349685623 -100.265
+9639 1349685631 -099.960
+9640 1349685639 -099.481
+9641 1349685647 -099.154
+9642 1349685655 -099.297
+9643 1349685663 -099.754
+9644 1349685671 -099.823
+9645 1349685679 -099.605
+9646 1349685687 -099.654
+9647 1349685695 -098.971
+9648 1349685703 -099.869
+9649 1349685711 -099.812
+9650 1349685719 -096.463
+9651 1349685727 -096.391
+9652 1349685735 -096.418
+9653 1349685743 -100.303
+9654 1349685751 -100.510
+9655 1349685759 -099.455
+9656 1349685767 -096.541
+9657 1349685775 -096.270
+9658 1349685783 -096.851
+9659 1349685791 -100.014
+9660 1349685799 -100.426
+9661 1349685807 -100.344
+9662 1349685815 -100.330
+9663 1349685823 -100.419
+9664 1349685831 -099.442
+9665 1349685839 -096.740
+9666 1349685847 -098.797
+9667 1349685855 -098.946
+9668 1349685863 -100.371
+9669 1349685871 -100.342
+9670 1349685879 -100.384
+9671 1349685887 -100.651
+9672 1349685895 -100.731
+9673 1349685903 -101.302
+9674 1349685911 -101.227
+9675 1349685919 -099.904
+9676 1349685927 -100.615
+9677 1349685935 -100.553
+9678 1349685943 -101.647
+9679 1349685951 -096.294
+9680 1349685959 -096.423
+9681 1349685967 -096.495
+9682 1349685975 -100.163
+9683 1349685983 -100.081
+9684 1349685991 -100.103
+9685 1349685999 -100.086
+9686 1349686007 -100.728
+9687 1349686015 -100.279
+9688 1349686023 -101.122
+9689 1349686031 -101.489
+9690 1349686039 -101.349
+9691 1349686047 -101.229
+9692 1349686055 -101.325
+9693 1349686063 -101.379
+9694 1349686071 -089.607
+9695 1349686079 -088.393
+9696 1349686087 -088.379
+9697 1349686095 -091.257
+9698 1349686103 -101.599
+9699 1349686111 -101.855
+9700 1349686119 -101.531
+9701 1349686127 -102.192
+9702 1349686135 -101.969
+9703 1349686143 -101.752
+9704 1349686151 -101.747
+9705 1349686159 -101.671
+9706 1349686167 -101.161
+9707 1349686175 -101.489
+9708 1349686183 -101.312
+9709 1349686191 -100.945
+9710 1349686199 -097.126
+9711 1349686207 -096.705
+9712 1349686215 -096.287
+9713 1349686223 -101.157
+9714 1349686231 -101.612
+9715 1349686239 -101.646
+9716 1349686247 -101.710
+9717 1349686255 -101.595
+9718 1349686263 -101.554
+9719 1349686271 -101.439
+9720 1349686279 -101.055
+9721 1349686287 -100.680
+9722 1349686295 -101.113
+9723 1349686303 -100.185
+9724 1349686311 -100.348
+9725 1349686319 -098.298
+9726 1349686327 -098.182
+9727 1349686335 -098.566
+9728 1349686343 -101.139
+9729 1349686351 -101.551
+9730 1349686359 -101.614
+9731 1349686367 -101.181
+9732 1349686375 -101.049
+9733 1349686383 -101.197
+9734 1349686391 -102.664
+9735 1349686399 -103.359
+9736 1349686407 -103.343
+9737 1349686415 -103.113
+9738 1349686423 -103.331
+9739 1349686431 -103.397
+9740 1349686439 -097.609
+9741 1349686447 -097.910
+9742 1349686455 -097.986
+9743 1349686463 -103.558
+9744 1349686471 -103.296
+9745 1349686479 -100.633
+9746 1349686487 -099.571
+9747 1349686495 -099.841
+9748 1349686503 -102.915
+9749 1349686511 -102.424
+9750 1349686519 -095.583
+9751 1349686527 -096.088
+9752 1349686535 -102.312
+9753 1349686543 -103.343
+9754 1349686551 -104.123
+9755 1349686559 -102.977
+9756 1349686567 -101.820
+9757 1349686575 -101.675
+9758 1349686583 -102.821
+9759 1349686591 -104.066
+9760 1349686599 -104.383
+9761 1349686607 -104.517
+9762 1349686615 -104.151
+9763 1349686623 -104.403
+9764 1349686631 -103.611
+9765 1349686639 -102.620
+9766 1349686647 -102.337
+9767 1349686655 -103.469
+9768 1349686663 -102.829
+9769 1349686671 -103.117
+9770 1349686679 -103.208
+9771 1349686687 -103.459
+9772 1349686695 -103.590
+9773 1349686703 -104.019
+9774 1349686711 -103.033
+9775 1349686719 -104.333
+9776 1349686727 -104.432
+9777 1349686735 -104.424
+9778 1349686743 -104.293
+9779 1349686751 -104.256
+9780 1349686759 -104.498
+9781 1349686767 -104.893
+9782 1349686775 -104.881
+9783 1349686783 -104.565
+9784 1349686791 -104.285
+9785 1349686799 -104.142
+9786 1349686807 -102.195
+9787 1349686815 -102.484
+9788 1349686823 -102.149
+9789 1349686831 -104.126
+9790 1349686839 -103.929
+9791 1349686847 -104.046
+9792 1349686855 -104.526
+9793 1349686863 -104.221
+9794 1349686871 -102.626
+9795 1349686879 -100.198
+9796 1349686887 -100.822
+9797 1349686895 -101.632
+9798 1349686903 -101.999
+9799 1349686911 -102.208
+9800 1349686919 -101.964
+9801 1349686927 -097.829
+9802 1349686935 -097.891
+9803 1349686943 -098.054
+9804 1349686951 -102.209
+9805 1349686959 -094.544
+9806 1349686967 -095.297
+9807 1349686975 -102.341
+9808 1349686983 -101.207
+9809 1349686991 -101.161
+9810 1349686999 -100.855
+9811 1349687007 -101.562
+9812 1349687015 -101.375
+9813 1349687023 -102.362
+9814 1349687031 -102.588
+9815 1349687039 -102.005
+9816 1349687047 -095.192
+9817 1349687055 -090.914
+9818 1349687063 -090.689
+9819 1349687071 -092.603
+9820 1349687079 -102.501
+9821 1349687087 -102.761
+9822 1349687095 -102.594
+9823 1349687103 -102.303
+9824 1349687111 -102.107
+9825 1349687119 -102.305
+9826 1349687127 -102.479
+9827 1349687135 -102.547
+9828 1349687143 -102.043
+9829 1349687151 -102.271
+9830 1349687159 -101.766
+9831 1349687167 -102.101
+9832 1349687175 -102.171
+9833 1349687183 -102.608
+9834 1349687191 -102.650
+9835 1349687199 -102.311
+9836 1349687207 -102.283
+9837 1349687215 -101.913
+9838 1349687223 -101.785
+9839 1349687231 -101.322
+9840 1349687239 -101.819
+9841 1349687247 -101.881
+9842 1349687255 -102.299
+9843 1349687263 -102.069
+9844 1349687271 -100.709
+9845 1349687279 -100.829
+9846 1349687287 -100.893
+9847 1349687295 -094.158
+9848 1349687303 -093.905
+9849 1349687311 -094.295
+9850 1349687319 -102.437
+9851 1349687327 -102.481
+9852 1349687335 -102.900
+9853 1349687343 -103.260
+9854 1349687351 -103.288
+9855 1349687359 -103.395
+9856 1349687367 -103.202
+9857 1349687375 -103.449
+9858 1349687383 -103.540
+9859 1349687391 -104.135
+9860 1349687399 -104.434
+9861 1349687407 -103.598
+9862 1349687415 -098.282
+9863 1349687423 -098.079
+9864 1349687431 -098.253
+9865 1349687439 -104.555
+9866 1349687447 -104.364
+9867 1349687455 -104.380
+9868 1349687463 -104.236
+9869 1349687471 -103.651
+9870 1349687479 -103.872
+9871 1349687487 -104.004
+9872 1349687495 -104.398
+9873 1349687503 -104.852
+9874 1349687511 -104.651
+9875 1349687519 -104.359
+9876 1349687527 -104.059
+9877 1349687535 -098.902
+9878 1349687543 -094.411
+9879 1349687551 -094.923
+9880 1349687559 -095.051
+9881 1349687567 -099.138
+9882 1349687575 -097.426
+9883 1349687583 -103.781
+9884 1349687591 -103.780
+9885 1349687599 -103.930
+9886 1349687607 -104.384
+9887 1349687615 -104.200
+9888 1349687623 -104.227
+9889 1349687631 -104.036
+9890 1349687639 -103.366
+9891 1349687647 -103.497
+9892 1349687655 -103.315
+9893 1349687663 -103.826
+9894 1349687671 -103.993
+9895 1349687679 -103.735
+9896 1349687687 -104.008
+9897 1349687695 -104.321
+9898 1349687703 -104.492
+9899 1349687711 -104.661
+9900 1349687719 -104.473
+9901 1349687727 -104.264
+9902 1349687735 -104.062
+9903 1349687743 -104.119
+9904 1349687751 -104.541
+9905 1349687759 -104.882
+9906 1349687767 -104.725
+9907 1349687775 -099.722
+9908 1349687783 -097.177
+9909 1349687791 -097.276
+9910 1349687799 -097.291
+9911 1349687807 -101.857
+9912 1349687815 -101.841
+9913 1349687823 -101.821
+9914 1349687831 -102.235
+9915 1349687839 -101.911
+9916 1349687847 -102.196
+9917 1349687855 -102.378
+9918 1349687863 -102.704
+9919 1349687871 -102.812
+9920 1349687879 -102.928
+9921 1349687887 -102.709
+9922 1349687895 -102.515
+9923 1349687903 -098.507
+9924 1349687911 -098.089
+9925 1349687919 -098.106
+9926 1349687927 -102.965
+9927 1349687935 -102.276
+9928 1349687943 -102.344
+9929 1349687951 -102.318
+9930 1349687959 -100.647
+9931 1349687967 -102.330
+9932 1349687975 -101.862
+9933 1349687983 -102.035
+9934 1349687991 -101.430
+9935 1349687999 -101.393
+9936 1349688007 -101.659
+9937 1349688015 -101.653
+9938 1349688023 -092.426
+9939 1349688031 -085.558
+9940 1349688039 -085.689
+9941 1349688047 -086.971
+9942 1349688055 -101.435
+9943 1349688063 -101.904
+9944 1349688071 -102.434
+9945 1349688079 -102.299
+9946 1349688087 -102.278
+9947 1349688095 -102.079
+9948 1349688103 -102.055
+9949 1349688111 -102.168
+9950 1349688119 -101.890
+9951 1349688127 -102.563
+9952 1349688135 -102.482
+9953 1349688143 -102.401
+9954 1349688151 -102.299
+9955 1349688159 -102.354
+9956 1349688167 -102.487
+9957 1349688175 -102.579
+9958 1349688183 -102.796
+9959 1349688191 -102.650
+9960 1349688199 -102.235
+9961 1349688207 -102.079
+9962 1349688215 -101.883
+9963 1349688223 -103.045
+9964 1349688231 -100.251
+9965 1349688239 -101.502
+9966 1349688247 -101.006
+9967 1349688255 -100.995
+9968 1349688263 -100.789
+9969 1349688271 -098.207
+9970 1349688279 -098.286
+9971 1349688287 -098.068
+9972 1349688295 -101.566
+9973 1349688303 -101.169
+9974 1349688311 -101.239
+9975 1349688319 -100.372
+9976 1349688327 -100.193
+9977 1349688335 -100.257
+9978 1349688343 -101.419
+9979 1349688351 -101.234
+9980 1349688359 -100.951
+9981 1349688367 -101.106
+9982 1349688375 -100.967
+9983 1349688383 -100.671
+9984 1349688391 -098.083
+9985 1349688399 -097.360
+9986 1349688407 -097.346
+9987 1349688415 -100.710
+9988 1349688423 -100.639
+9989 1349688431 -100.861
+9990 1349688439 -100.623
+9991 1349688447 -100.557
+9992 1349688455 -100.671
+9993 1349688463 -100.697
+9994 1349688471 -100.607
+9995 1349688479 -100.705
+9996 1349688487 -100.571
+9997 1349688495 -100.645
+9998 1349688503 -100.651
+9999 1349688511 -098.849
+10000 1349688519 -092.363
+10001 1349688527 -092.122
+10002 1349688535 -093.629
+10003 1349688543 -100.353
+10004 1349688551 -100.151
+10005 1349688559 -100.388
+10006 1349688567 -100.102
+10007 1349688575 -100.317
+10008 1349688583 -100.302
+10009 1349688591 -101.236
+10010 1349688599 -101.036
+10011 1349688607 -101.208
+10012 1349688615 -101.022
+10013 1349688623 -100.307
+10014 1349688631 -100.451
+10015 1349688639 -100.576
+10016 1349688647 -100.691
+10017 1349688655 -101.473
+10018 1349688663 -101.086
+10019 1349688671 -100.559
+10020 1349688679 -101.115
+10021 1349688687 -100.533
+10022 1349688695 -100.492
+10023 1349688703 -100.667
+10024 1349688711 -100.927
+10025 1349688719 -101.299
+10026 1349688727 -100.780
+10027 1349688735 -100.841
+10028 1349688743 -100.787
+10029 1349688751 -101.089
+10030 1349688759 -099.013
+10031 1349688767 -098.250
+10032 1349688775 -098.291
+10033 1349688783 -100.564
+10034 1349688791 -101.022
+10035 1349688799 -101.033
+10036 1349688807 -101.304
+10037 1349688815 -101.432
+10038 1349688823 -101.353
+10039 1349688831 -101.045
+10040 1349688839 -101.243
+10041 1349688847 -101.155
+10042 1349688855 -101.277
+10043 1349688863 -101.291
+10044 1349688871 -101.545
+10045 1349688879 -097.999
+10046 1349688887 -096.639
+10047 1349688895 -096.939
+10048 1349688903 -100.684
+10049 1349688911 -101.544
+10050 1349688919 -101.671
+10051 1349688927 -101.439
+10052 1349688935 -101.387
+10053 1349688943 -101.330
+10054 1349688951 -101.239
+10055 1349688959 -101.058
+10056 1349688967 -101.401
+10057 1349688975 -101.387
+10058 1349688983 -101.146
+10059 1349688991 -100.577
+10060 1349688999 -092.206
+10061 1349689007 -083.476
+10062 1349689015 -083.888
+10063 1349689023 -084.510
+10064 1349689031 -100.848
+10065 1349689039 -100.647
+10066 1349689047 -100.632
+10067 1349689055 -100.794
+10068 1349689063 -101.214
+10069 1349689071 -101.099
+10070 1349689079 -101.479
+10071 1349689087 -101.335
+10072 1349689095 -101.083
+10073 1349689103 -101.123
+10074 1349689111 -101.102
+10075 1349689119 -101.245
+10076 1349689127 -101.325
+10077 1349689135 -101.434
+10078 1349689143 -100.858
+10079 1349689151 -100.517
+10080 1349689159 -101.157
+10081 1349689167 -101.234
+10082 1349689175 -101.611
+10083 1349689183 -101.702
+10084 1349689191 -101.577
+10085 1349689199 -101.426
+10086 1349689207 -101.516
+10087 1349689215 -101.734
+10088 1349689223 -101.422
+10089 1349689231 -101.723
+10090 1349689239 -101.719
+10091 1349689247 -101.793
+10092 1349689255 -101.464
+10093 1349689263 -101.577
+10094 1349689271 -102.034
+10095 1349689279 -101.921
+10096 1349689287 -101.891
+10097 1349689295 -101.587
+10098 1349689303 -100.886
+10099 1349689311 -100.791
+10100 1349689319 -100.824
+10101 1349689327 -101.335
+10102 1349689335 -101.175
+10103 1349689343 -100.951
+10104 1349689351 -100.959
+10105 1349689359 -101.140
+10106 1349689367 -097.944
+10107 1349689375 -096.318
+10108 1349689383 -096.542
+10109 1349689391 -097.548
+10110 1349689399 -101.458
+10111 1349689407 -101.212
+10112 1349689415 -100.901
+10113 1349689423 -100.824
+10114 1349689431 -101.087
+10115 1349689439 -101.088
+10116 1349689447 -101.016
+10117 1349689455 -100.882
+10118 1349689463 -100.649
+10119 1349689471 -100.626
+10120 1349689479 -100.042
+10121 1349689487 -095.315
+10122 1349689495 -088.073
+10123 1349689503 -088.165
+10124 1349689511 -088.217
+10125 1349689519 -099.804
+10126 1349689527 -100.306
+10127 1349689535 -100.533
+10128 1349689543 -100.882
+10129 1349689551 -101.207
+10130 1349689559 -101.551
+10131 1349689567 -101.160
+10132 1349689575 -101.214
+10133 1349689583 -101.271
+10134 1349689591 -101.037
+10135 1349689599 -101.524
+10136 1349689607 -101.532
+10137 1349689615 -101.453
+10138 1349689623 -101.457
+10139 1349689631 -101.273
+10140 1349689639 -101.439
+10141 1349689647 -101.493
+10142 1349689655 -101.635
+10143 1349689663 -101.221
+10144 1349689671 -101.164
+10145 1349689679 -100.927
+10146 1349689687 -101.037
+10147 1349689695 -101.256
+10148 1349689703 -101.618
+10149 1349689711 -101.389
+10150 1349689719 -101.479
+10151 1349689727 -100.692
+10152 1349689735 -094.829
+10153 1349689743 -093.375
+10154 1349689751 -093.652
+10155 1349689759 -096.272
+10156 1349689767 -101.739
+10157 1349689775 -101.489
+10158 1349689783 -101.475
+10159 1349689791 -101.383
+10160 1349689799 -101.572
+10161 1349689807 -101.983
+10162 1349689816 -102.082
+10163 1349689824 -101.845
+10164 1349689832 -101.599
+10165 1349689840 -101.360
+10166 1349689848 -102.147
+10167 1349689856 -098.787
+10168 1349689864 -096.457
+10169 1349689872 -096.584
+10170 1349689880 -096.984
+10171 1349689888 -101.881
+10172 1349689896 -101.997
+10173 1349689904 -101.906
+10174 1349689912 -102.041
+10175 1349689920 -101.492
+10176 1349689928 -101.682
+10177 1349689936 -101.384
+10178 1349689944 -101.658
+10179 1349689952 -101.635
+10180 1349689960 -101.369
+10181 1349689968 -101.180
+10182 1349689976 -101.973
+10183 1349689984 -099.684
+10184 1349689992 -099.475
+10185 1349690000 -099.486
+10186 1349690008 -101.904
+10187 1349690016 -102.039
+10188 1349690024 -102.431
+10189 1349690032 -102.893
+10190 1349690040 -102.496
+10191 1349690048 -102.399
+10192 1349690056 -102.474
+10193 1349690064 -102.669
+10194 1349690072 -102.610
+10195 1349690080 -102.311
+10196 1349690088 -102.431
+10197 1349690096 -102.398
+10198 1349690104 -102.585
+10199 1349690112 -101.968
+10200 1349690120 -101.911
+10201 1349690128 -101.933
+10202 1349690136 -102.877
+10203 1349690144 -102.582
+10204 1349690152 -102.288
+10205 1349690160 -102.588
+10206 1349690168 -102.541
+10207 1349690176 -102.614
+10208 1349690184 -102.849
+10209 1349690192 -102.383
+10210 1349690200 -102.379
+10211 1349690208 -102.241
+10212 1349690216 -102.023
+10213 1349690224 -102.489
+10214 1349690232 -102.749
+10215 1349690240 -102.493
+10216 1349690248 -102.293
+10217 1349690256 -102.252
+10218 1349690264 -101.652
+10219 1349690272 -101.240
+10220 1349690280 -101.374
+10221 1349690288 -102.006
+10222 1349690296 -102.673
+10223 1349690304 -102.084
+10224 1349690312 -101.249
+10225 1349690320 -101.238
+10226 1349690328 -101.701
+10227 1349690336 -102.842
+10228 1349690344 -102.545
+10229 1349690352 -096.537
+10230 1349690360 -096.384
+10231 1349690368 -096.586
+10232 1349690376 -102.381
+10233 1349690384 -102.579
+10234 1349690392 -102.490
+10235 1349690400 -102.630
+10236 1349690408 -102.036
+10237 1349690416 -101.928
+10238 1349690424 -101.863
+10239 1349690432 -101.870
+10240 1349690440 -102.180
+10241 1349690448 -102.510
+10242 1349690456 -102.061
+10243 1349690464 -084.749
+10244 1349690472 -084.575
+10245 1349690480 -083.618
+10246 1349690488 -084.178
+10247 1349690496 -099.843
+10248 1349690504 -099.712
+10249 1349690512 -099.745
+10250 1349690520 -099.854
+9250 1350098952 -101.759
+9251 1350098960 -095.481
+9252 1350098968 -093.293
+9253 1350098976 -093.603
+9254 1350098984 -093.888
+9255 1350098992 -098.651
+9256 1350099000 -098.558
+9257 1350099008 -098.555
+9258 1350099016 -098.679
+9259 1350099024 -099.094
+9260 1350099032 -097.279
+9261 1350099040 -098.318
+9262 1350099048 -098.263
+9263 1350099056 -098.335
+9264 1350099064 -098.273
+9265 1350099072 -098.328
+9266 1350099080 -098.160
+9267 1350099088 -096.200
+9268 1350099096 -096.197
+9269 1350099104 -096.069
+9270 1350099112 -098.819
+9271 1350099120 -098.340
+9272 1350099128 -098.064
+9273 1350099136 -095.877
+9274 1350099144 -094.778
+9275 1350099152 -094.945
+9276 1350099160 -095.775
+9277 1350099168 -095.952
+9278 1350099176 -096.009
+9279 1350099184 -096.499
+9280 1350099192 -096.597
+9281 1350099200 -094.596
+9282 1350099208 -094.543
+9283 1350099216 -094.731
+9284 1350099224 -096.847
+9285 1350099232 -096.831
+9286 1350099240 -096.674
+9287 1350099248 -097.257
+9288 1350099256 -097.362
+9289 1350099264 -097.349
+9290 1350099272 -097.257
+9291 1350099280 -097.370
+9292 1350099288 -097.275
+9293 1350099296 -097.343
+9294 1350099304 -097.568
+9295 1350099312 -097.571
+9296 1350099320 -097.379
+9297 1350099328 -097.460
+9298 1350099336 -097.469
+9299 1350099344 -097.031
+9300 1350099352 -096.697
+9301 1350099360 -096.835
+9302 1350099368 -096.534
+9303 1350099376 -096.372
+9304 1350099384 -096.306
+9305 1350099392 -095.249
+9306 1350099400 -094.345
+9307 1350099408 -094.820
+9308 1350099416 -093.919
+9309 1350099424 -095.072
+9310 1350099432 -095.101
+9311 1350099440 -095.655
+9312 1350099448 -095.581
+9313 1350099456 -092.102
+9314 1350099464 -091.896
+9315 1350099472 -091.450
+9316 1350099480 -093.458
+9317 1350099488 -093.267
+9318 1350099496 -093.135
+9319 1350099504 -092.521
+9320 1350099512 -092.287
+9321 1350099520 -093.185
+9322 1350099528 -093.835
+9323 1350099536 -094.661
+9324 1350099544 -095.381
+9325 1350099552 -095.392
+9326 1350099560 -095.707
+9327 1350099568 -095.629
+9328 1350099576 -081.033
+9329 1350099584 -082.267
+9330 1350099592 -082.475
+9331 1350099600 -095.368
+9332 1350099608 -095.224
+9333 1350099616 -095.609
+9334 1350099624 -096.410
+9335 1350099632 -096.577
+9336 1350099640 -096.653
+9337 1350099648 -096.209
+9338 1350099656 -096.973
+9339 1350099664 -097.439
+9340 1350099672 -097.725
+9341 1350099680 -098.256
+9342 1350099688 -097.995
+9343 1350099696 -097.675
+9344 1350099704 -097.629
+9345 1350099712 -097.802
+9346 1350099720 -097.582
+9347 1350099728 -097.267
+9348 1350099736 -097.327
+9349 1350099744 -097.300
+9350 1350099752 -097.466
+9351 1350099760 -097.240
+9352 1350099768 -098.029
+9353 1350099776 -098.635
+9354 1350099784 -098.937
+9355 1350099792 -099.054
+9356 1350099800 -097.408
+9357 1350099808 -096.893
+9358 1350099816 -092.731
+9359 1350099824 -087.983
+9360 1350099832 -088.366
+9361 1350099840 -089.921
+9362 1350099848 -097.957
+9363 1350099856 -098.067
+9364 1350099864 -098.402
+9365 1350099872 -098.467
+9366 1350099880 -098.718
+9367 1350099888 -099.117
+9368 1350099896 -099.339
+9369 1350099904 -099.369
+9370 1350099912 -099.725
+9371 1350099920 -099.743
+9372 1350099928 -100.053
+9373 1350099936 -099.689
+9374 1350099944 -093.893
+9375 1350099952 -092.882
+9376 1350099960 -093.045
+9377 1350099968 -097.039
+9378 1350099976 -099.794
+9379 1350099984 -098.366
+9380 1350099992 -098.328
+9381 1350100000 -098.917
+9382 1350100008 -098.955
+9383 1350100016 -098.470
+9384 1350100024 -098.780
+9385 1350100032 -098.779
+9386 1350100040 -099.015
+9387 1350100048 -099.132
+9388 1350100056 -098.875
+9389 1350100064 -079.531
+9390 1350100072 -079.428
+9391 1350100080 -080.187
+9392 1350100088 -090.051
+9393 1350100096 -099.576
+9394 1350100104 -099.494
+9395 1350100112 -099.293
+9396 1350100120 -099.233
+9397 1350100128 -099.467
+9398 1350100136 -098.893
+9399 1350100144 -097.928
+9400 1350100152 -097.911
+9401 1350100160 -098.340
+9402 1350100168 -098.437
+9403 1350100176 -098.708
+9404 1350100184 -098.883
+9405 1350100192 -098.930
+9406 1350100200 -098.886
+9407 1350100208 -099.258
+9408 1350100216 -098.838
+9409 1350100224 -099.271
+9410 1350100232 -099.092
+9411 1350100240 -099.491
+9412 1350100248 -099.657
+9413 1350100256 -099.633
+9414 1350100264 -099.441
+9415 1350100272 -099.432
+9416 1350100280 -099.243
+9417 1350100288 -098.352
+9418 1350100296 -098.490
+9419 1350100304 -094.698
+9420 1350100312 -090.641
+9421 1350100320 -090.737
+9422 1350100328 -091.487
+9423 1350100336 -099.772
+9424 1350100344 -099.618
+9425 1350100352 -100.091
+9426 1350100360 -099.191
+9427 1350100368 -098.738
+9428 1350100376 -095.245
+9429 1350100384 -097.981
+9430 1350100392 -099.610
+9431 1350100400 -099.864
+9432 1350100408 -099.752
+9433 1350100416 -100.971
+9434 1350100424 -100.554
+9435 1350100432 -094.399
+9436 1350100440 -094.328
+9437 1350100448 -094.388
+9438 1350100456 -100.076
+9439 1350100464 -099.471
+9440 1350100472 -097.722
+9441 1350100480 -096.927
+9442 1350100488 -097.057
+9443 1350100496 -097.692
+9444 1350100504 -097.805
+9445 1350100512 -098.472
+9446 1350100520 -098.560
+9447 1350100528 -098.380
+9448 1350100536 -098.699
+9449 1350100544 -098.790
+9450 1350100552 -084.630
+9451 1350100560 -084.509
+9452 1350100568 -084.867
+9453 1350100576 -097.737
+9454 1350100584 -097.677
+9455 1350100592 -097.648
+9456 1350100600 -098.565
+9457 1350100608 -099.488
+9458 1350100616 -099.663
+9459 1350100624 -099.989
+9460 1350100632 -099.908
+9461 1350100640 -100.245
+9462 1350100648 -100.125
+9463 1350100656 -099.907
+9464 1350100664 -099.911
+9465 1350100672 -100.023
+9466 1350100680 -100.029
+9467 1350100688 -099.574
+9468 1350100696 -096.995
+9469 1350100704 -097.620
+9470 1350100712 -097.668
+9471 1350100720 -095.847
+9472 1350100728 -101.257
+9473 1350100736 -101.596
+9474 1350100744 -101.419
+9475 1350100752 -101.411
+9476 1350100760 -101.445
+9477 1350100768 -101.399
+9478 1350100776 -101.463
+9479 1350100784 -100.343
+9480 1350100792 -100.298
+9481 1350100800 -098.909
+9482 1350100808 -099.238
+9483 1350100816 -094.477
+9484 1350100824 -094.888
+9485 1350100832 -095.277
+9486 1350100840 -095.236
+9487 1350100848 -095.362
+9488 1350100856 -095.388
+9489 1350100864 -095.214
+9490 1350100872 -095.672
+9491 1350100880 -096.067
+9492 1350100888 -094.334
+9493 1350100896 -095.360
+9494 1350100904 -094.715
+9495 1350100912 -094.223
+9496 1350100920 -092.578
+9497 1350100928 -092.713
+9498 1350100936 -092.697
+9499 1350100944 -094.731
+9500 1350100952 -094.671
+9501 1350100960 -094.848
+9502 1350100968 -094.813
+9503 1350100976 -094.947
+9504 1350100984 -095.085
+9505 1350100992 -094.958
+9506 1350101000 -094.982
+9507 1350101008 -094.954
+9508 1350101016 -095.466
+9509 1350101024 -095.516
+9510 1350101032 -095.482
+9511 1350101040 -086.373
+9512 1350101048 -085.099
+9513 1350101056 -085.646
+9514 1350101064 -095.594
+9515 1350101072 -095.908
+9516 1350101080 -096.275
+9517 1350101088 -096.297
+9518 1350101096 -096.512
+9519 1350101104 -096.844
+9520 1350101112 -096.299
+9521 1350101120 -096.477
+9522 1350101128 -096.044
+9523 1350101136 -096.505
+9524 1350101144 -093.473
+9525 1350101152 -092.214
+9526 1350101160 -091.348
+9527 1350101168 -091.778
+9528 1350101176 -091.640
+9529 1350101184 -091.571
+9530 1350101192 -092.535
+9531 1350101200 -096.337
+9532 1350101208 -096.765
+9533 1350101216 -097.168
+9534 1350101224 -097.128
+9535 1350101232 -095.825
+9536 1350101240 -092.682
+9537 1350101248 -092.837
+9538 1350101256 -094.463
+9539 1350101264 -094.832
+9540 1350101272 -095.047
+9541 1350101280 -094.796
+9542 1350101288 -094.687
+9543 1350101296 -094.887
+9544 1350101304 -094.957
+9545 1350101312 -095.244
+9546 1350101320 -094.791
+9547 1350101328 -094.938
+9548 1350101336 -095.160
+9549 1350101344 -095.434
+9550 1350101352 -095.426
+9551 1350101360 -095.671
+9552 1350101368 -095.473
+9553 1350101376 -095.645
+9554 1350101384 -095.711
+9555 1350101392 -095.822
+9556 1350101400 -096.002
+9557 1350101408 -093.553
+9558 1350101416 -093.567
+9559 1350101424 -093.639
+9560 1350101432 -095.137
+9561 1350101440 -094.840
+9562 1350101448 -094.407
+9563 1350101456 -094.139
+9564 1350101464 -094.183
+9565 1350101472 -094.877
+9566 1350101480 -095.275
+9567 1350101488 -095.806
+9568 1350101496 -096.022
+9569 1350101504 -096.077
+9570 1350101512 -096.200
+9571 1350101520 -096.356
+9572 1350101528 -089.268
+9573 1350101536 -087.963
+9574 1350101544 -087.603
+9575 1350101552 -096.254
+9576 1350101560 -096.625
+9577 1350101568 -096.480
+9578 1350101576 -096.689
+9579 1350101584 -096.257
+9580 1350101592 -096.305
+9581 1350101600 -096.278
+9582 1350101608 -097.065
+9583 1350101616 -096.945
+9584 1350101624 -096.754
+9585 1350101632 -096.401
+9586 1350101640 -096.035
+9587 1350101648 -095.905
+9588 1350101656 -095.967
+9589 1350101664 -096.375
+9590 1350101672 -096.917
+9591 1350101680 -096.987
+9592 1350101688 -097.058
+9593 1350101696 -097.055
+9594 1350101704 -097.246
+9595 1350101712 -091.600
+9596 1350101720 -094.101
+9597 1350101728 -096.768
+9598 1350101736 -096.915
+9599 1350101744 -097.039
+9600 1350101752 -097.232
+9601 1350101760 -095.505
+9602 1350101768 -095.360
+9603 1350101776 -095.047
+9604 1350101784 -095.050
+9605 1350101792 -095.377
+9606 1350101800 -095.171
+9607 1350101808 -094.887
+9608 1350101816 -094.535
+9609 1350101824 -094.976
+9610 1350101832 -095.068
+9611 1350101840 -095.098
+9612 1350101848 -095.095
+9613 1350101856 -095.349
+9614 1350101864 -095.542
+9615 1350101872 -095.502
+9616 1350101880 -095.901
+9617 1350101888 -096.095
+9618 1350101896 -094.171
+9619 1350101904 -094.493
+9620 1350101912 -094.034
+9621 1350101920 -096.546
+9622 1350101928 -096.641
+9623 1350101936 -097.382
+9624 1350101944 -097.336
+9625 1350101952 -097.101
+9626 1350101960 -097.179
+9627 1350101968 -097.325
+9628 1350101976 -097.969
+9629 1350101984 -096.500
+9630 1350101992 -080.491
+9631 1350102000 -079.181
+9632 1350102008 -077.263
+9633 1350102016 -092.224
+9634 1350102024 -091.981
+9635 1350102032 -092.463
+9636 1350102040 -095.121
+9637 1350102048 -098.903
+9638 1350102056 -099.283
+9639 1350102064 -099.193
+9640 1350102072 -098.321
+9641 1350102080 -099.069
+9642 1350102088 -098.841
+9643 1350102096 -099.256
+9644 1350102104 -099.241
+9645 1350102112 -099.333
+9646 1350102120 -099.091
+9647 1350102128 -098.983
+9648 1350102136 -099.375
+9649 1350102144 -099.201
+9650 1350102152 -099.455
+9651 1350102160 -099.301
+9652 1350102168 -098.845
+9653 1350102176 -098.012
+9654 1350102184 -098.188
+9655 1350102192 -098.736
+9656 1350102200 -097.757
+9657 1350102208 -096.935
+9658 1350102216 -097.791
+9659 1350102224 -099.809
+9660 1350102232 -099.955
+9661 1350102240 -100.114
+9662 1350102248 -100.254
+9663 1350102256 -100.411
+9664 1350102264 -099.049
+9665 1350102272 -099.067
+9666 1350102280 -099.273
+9667 1350102288 -100.181
+9668 1350102296 -100.603
+9669 1350102304 -100.818
+9670 1350102312 -100.761
+9671 1350102320 -100.871
+9672 1350102328 -100.911
+9673 1350102336 -101.127
+9674 1350102344 -101.362
+9675 1350102352 -101.035
+9676 1350102360 -100.711
+9677 1350102368 -100.682
+9678 1350102376 -100.872
+9679 1350102384 -096.915
+9680 1350102392 -097.064
+9681 1350102400 -097.252
+9682 1350102408 -101.699
+9683 1350102416 -101.416
+9684 1350102424 -100.537
+9685 1350102432 -099.915
+9686 1350102440 -099.694
+9687 1350102448 -100.418
+9688 1350102456 -100.263
+9689 1350102464 -100.384
+9690 1350102472 -100.370
+9691 1350102480 -098.191
+9692 1350102488 -097.805
+9693 1350102496 -097.754
+9694 1350102504 -088.299
+9695 1350102512 -086.759
+9696 1350102520 -086.755
+9697 1350102528 -088.923
+9698 1350102536 -098.579
+9699 1350102544 -099.081
+9700 1350102552 -099.361
+9701 1350102560 -099.813
+9702 1350102568 -099.785
+9703 1350102576 -099.987
+9704 1350102584 -100.035
+9705 1350102592 -100.023
+9706 1350102600 -100.033
+9707 1350102608 -100.047
+9708 1350102616 -099.917
+9709 1350102624 -098.898
+9710 1350102632 -097.658
+9711 1350102640 -097.995
+9712 1350102648 -097.554
+9713 1350102656 -098.028
+9714 1350102664 -098.434
+9715 1350102672 -098.744
+9716 1350102680 -098.891
+9717 1350102688 -098.663
+9718 1350102696 -098.423
+9719 1350102704 -098.024
+9720 1350102712 -098.112
+9721 1350102720 -097.392
+9722 1350102728 -097.371
+9723 1350102736 -097.763
+9724 1350102744 -097.725
+9725 1350102752 -096.088
+9726 1350102760 -096.229
+9727 1350102768 -096.260
+9728 1350102776 -098.518
+9729 1350102784 -098.278
+9730 1350102792 -098.136
+9731 1350102800 -097.621
+9732 1350102808 -097.551
+9733 1350102816 -098.270
+9734 1350102824 -097.601
+9735 1350102832 -097.834
+9736 1350102840 -097.983
+9737 1350102848 -098.194
+9738 1350102856 -098.338
+9739 1350102864 -098.805
+9740 1350102872 -096.251
+9741 1350102880 -096.449
+9742 1350102888 -096.324
+9743 1350102896 -099.140
+9744 1350102904 -099.159
+9745 1350102912 -098.911
+9746 1350102920 -098.850
+9747 1350102928 -099.027
+9748 1350102936 -098.791
+9749 1350102944 -098.959
+9750 1350102952 -098.598
+9751 1350102960 -098.948
+9752 1350102968 -099.122
+9753 1350102976 -100.107
+9754 1350102984 -100.176
+9755 1350102992 -099.387
+9756 1350103000 -098.588
+9757 1350103008 -098.546
+9758 1350103016 -099.046
+9759 1350103024 -100.306
+9760 1350103032 -099.953
+9761 1350103040 -099.486
+9762 1350103048 -098.875
+9763 1350103056 -100.471
+9764 1350103064 -100.623
+9765 1350103072 -100.978
+9766 1350103080 -101.013
+9767 1350103088 -101.012
+9768 1350103096 -101.485
+9769 1350103104 -100.477
+9770 1350103112 -099.579
+9771 1350103120 -099.427
+9772 1350103128 -099.504
+9773 1350103136 -100.528
+9774 1350103144 -099.447
+9775 1350103152 -098.367
+9776 1350103160 -098.052
+9777 1350103168 -098.490
+9778 1350103176 -098.733
+9779 1350103184 -099.492
+9780 1350103192 -096.557
+9781 1350103200 -099.975
+9782 1350103208 -099.294
+9783 1350103216 -100.042
+9784 1350103224 -100.294
+9785 1350103232 -100.399
+9786 1350103240 -099.303
+9787 1350103248 -099.290
+9788 1350103256 -099.508
+9789 1350103264 -070.735
+9790 1350103272 -075.352
+9791 1350103280 -073.187
+9792 1350103288 -071.943
+9793 1350103296 -099.662
+9794 1350103304 -100.631
+9795 1350103312 -100.701
+9796 1350103320 -101.559
+9797 1350103328 -101.678
+9798 1350103336 -101.920
+9799 1350103344 -102.226
+9800 1350103352 -099.735
+9801 1350103360 -097.880
+9802 1350103368 -096.104
+9803 1350103376 -097.962
+9804 1350103384 -101.584