Commit | Line | Data |
---|---|---|
ff5df15a C |
1 | |
2 | ||
3 | ||
4 | L-DEVICES(5) UNIX Programmer's Manual L-DEVICES(5) | |
5 | ||
6 | ||
7 | ||
8 | N\bNA\bAM\bME\bE | |
9 | L-devices - UUCP device description file | |
10 | ||
11 | D\bDE\bES\bSC\bCR\bRI\bIP\bPT\bTI\bIO\bON\bN | |
12 | The L-devices file is consulted by the UUCP daemon | |
13 | _\bu_\bu_\bc_\bi_\bc_\bo(8C) under the direction of _\bL._\bs_\by_\bs(5) for information | |
14 | on the devices that it may use. Each line describes exactly | |
15 | one device. | |
16 | ||
17 | A line in _\bL-_\bd_\be_\bv_\bi_\bc_\be_\bs has the form: | |
18 | ||
19 | Caller Device Call_Unit Class Dialer [Expect Send].... | |
20 | ||
21 | Each item can be separated by any number of blanks or tabs. | |
22 | Lines beginning with a `#' character are comments; long | |
23 | lines can be continued by appending a `\' character to the | |
24 | end of the line. | |
25 | ||
26 | _\bC_\ba_\bl_\bl_\be_\br denotes the type of connection, and must be one of | |
27 | the following: | |
28 | ||
29 | A\bAC\bCU\bU Automatic call unit, e.g., autodialing modems such | |
30 | as the Hayes Smartmodem 1200 or Novation ``Smart | |
31 | Cat''. | |
32 | ||
33 | D\bDI\bIR\bR Direct connect; hardwired line (usually RS-232) to a | |
34 | remote system. | |
35 | ||
36 | D\bDK\bK AT&T Datakit. | |
37 | ||
38 | M\bMI\bIC\bCO\bOM\bM Micom Terminal switch. | |
39 | ||
40 | P\bPA\bAD\bD X.25 PAD connection. | |
41 | ||
42 | P\bPC\bCP\bP GTE Telenet PC Pursuit. | |
43 | ||
44 | S\bSY\bYT\bTE\bEK\bK Sytek high-speed dedicated modem port connection. | |
45 | ||
46 | T\bTC\bCP\bP Berkeley TCP/IP or 3Com UNET connection. These are | |
47 | mutually exclusive. Note that listing TCP connec- | |
48 | tions in _\bL-_\bd_\be_\bv_\bi_\bc_\be_\bs is superfluous; _\bu_\bu_\bc_\bi_\bc_\bo does not | |
49 | even bother to look here since it has all the infor- | |
50 | mation it needs in _\bL._\bs_\by_\bs(5). | |
51 | ||
52 | _\bD_\be_\bv_\bi_\bc_\be is a device file in /dev/ that is opened to use the | |
53 | device. The device file must be owned by UUCP, with access | |
54 | modes of 0600 or better. (See _\bc_\bh_\bm_\bo_\bd(2)). | |
55 | ||
56 | _\bC_\ba_\bl_\bl__\bU_\bn_\bi_\bt is an optional second device file name. True | |
57 | automatic call units use a separate device file for data and | |
58 | for dialing; the _\bD_\be_\bv_\bi_\bc_\be field specifies the data port, while | |
59 | the _\bC_\ba_\bl_\bl__\bu_\bn_\bi_\bt field specifies the dialing port. If the | |
60 | ||
61 | ||
62 | ||
63 | Printed 7/9/88 April 24, 1986 1 | |
64 | ||
65 | ||
66 | ||
67 | ||
68 | ||
69 | ||
70 | L-DEVICES(5) UNIX Programmer's Manual L-DEVICES(5) | |
71 | ||
72 | ||
73 | ||
74 | _\bC_\ba_\bl_\bl__\bu_\bn_\bi_\bt field is unused, it must not be left empty. | |
75 | Insert a dummy entry as a placeholder, such as ``0'' or | |
76 | ``unused.'' | |
77 | ||
78 | _\bC_\bl_\ba_\bs_\bs is an integer number that specifies the line baud (for | |
79 | dialers and direct lines) or the port number (for network | |
80 | connections). | |
81 | ||
82 | The _\bC_\bl_\ba_\bs_\bs may be preceded by a non-numeric prefix. This is | |
83 | to differentiate among devices that have identical _\bC_\ba_\bl_\bl_\be_\br | |
84 | and baud, but are distinctly different. For example, | |
85 | ``1200'' could refer to all Bell 212-compatible modems, | |
86 | ``V1200'' to Racal-Vadic modems, and ``C1200'' to CCITT | |
87 | modems, all at 1200 baud. Similarly, ``W1200'' could denote | |
88 | long distance lines, while ``L1200'' could refer to local | |
89 | phone lines. | |
90 | ||
91 | _\bD_\bi_\ba_\bl_\be_\br applies only to ACU devices. This is the "brand" or | |
92 | type of the ACU or modem. | |
93 | ||
94 | D\bDF\bF0\b02\b2 DEC DF02 or DF03 modems. | |
95 | ||
96 | D\bDF\bF1\b11\b12\b2 Dec DF112 modems. Use a _\bD_\bi_\ba_\bl_\be_\br field of D\bDF\bF1\b11\b12\b2T\bT to | |
97 | use tone dialing, or D\bDF\bF1\b11\b12\b2P\bP for pulse dialing. | |
98 | ||
99 | a\bat\btt\bt AT&T 2224 2400 baud modem. | |
100 | ||
101 | c\bcd\bds\bs2\b22\b24\b4 Concord Data Systems 224 2400 baud modem. | |
102 | ||
103 | d\bdn\bn1\b11\b1 DEC DN11 Unibus dialer. | |
104 | ||
105 | h\bha\bay\bye\bes\bs Hayes Smartmodem 1200 and compatible autodialing | |
106 | modems. Use a _\bD_\bi_\ba_\bl_\be_\br field of h\bha\bay\bye\bes\bst\bto\bon\bne\be to use tone | |
107 | dialing, or h\bha\bay\bye\bes\bsp\bpu\bul\bls\bse\be for pulse dialing. It is | |
108 | also permissible to include the letters `T' and `P' | |
109 | in the phone number (in _\bL._\bs_\by_\bs) to change to tone or | |
110 | pulse midway through dialing. (Note that a leading | |
111 | `T' or `P' will be interpreted as a dialcode!) | |
112 | ||
113 | h\bha\bay\bye\bes\bs2\b24\b40\b00\b0 | |
114 | Hayes Smartmodem 2400 and compatible modems. Use a | |
115 | _\bD_\bi_\ba_\bl_\be_\br field of h\bha\bay\bye\bes\bs2\b24\b40\b00\b0t\bto\bon\bne\be to use tone dialing, | |
116 | or h\bha\bay\bye\bes\bs2\b24\b40\b00\b0p\bpu\bul\bls\bse\be for pulse dialing. | |
117 | ||
118 | n\bno\bov\bva\bat\bti\bio\bon\bn | |
119 | Novation ``Smart Cat'' autodialing modem. | |
120 | ||
121 | p\bpe\ben\bnr\bri\bil\bl Penril Corp ``Hayes compatible'' modems (they really | |
122 | aren't or they would use the h\bha\bay\bye\bes\bs entry.) | |
123 | ||
124 | r\brv\bvm\bma\bac\bcs\bs Racal-Vadic 820 dialer with 831 adapter in a MACS | |
125 | configuration. | |
126 | ||
127 | ||
128 | ||
129 | Printed 7/9/88 April 24, 1986 2 | |
130 | ||
131 | ||
132 | ||
133 | ||
134 | ||
135 | ||
136 | L-DEVICES(5) UNIX Programmer's Manual L-DEVICES(5) | |
137 | ||
138 | ||
139 | ||
140 | v\bva\ba2\b21\b12\b2 Racal-Vadic 212 autodialing modem. | |
141 | ||
142 | v\bva\ba8\b81\b11\b1s\bs Racal-Vadic 811s dialer with 831 adapter. | |
143 | ||
144 | v\bva\ba8\b82\b20\b0 Racal-Vadic 820 dialer with 831 adapter. | |
145 | ||
146 | v\bva\bad\bdi\bic\bc Racal-Vadic 3450 and 3451 series autodialing modems. | |
147 | ||
148 | v\bve\ben\bnt\bte\bel\bl Ventel 212+ autodialing modem. | |
149 | ||
150 | v\bvm\bma\bac\bcs\bs Racal-Vadic 811 dialer with 831 adapter in a MACS | |
151 | configuration. | |
152 | ||
153 | _\bE_\bx_\bp_\be_\bc_\bt/_\bS_\be_\bn_\bd is an optional _\bE_\bx_\bp_\be_\bc_\bt/_\bS_\be_\bn_\bd script for getting | |
154 | through a smart port selector, or for issuing special com- | |
155 | mands to the modem. The syntax is identical to that of the | |
156 | Expect/Send script of _\bL._\bs_\by_\bs. The difference is that the _\bL- | |
157 | _\bd_\be_\bv_\bi_\bc_\be_\bs script is used _\bb_\be_\bf_\bo_\br_\be the connection is made, while | |
158 | the _\bL._\bs_\by_\bs script is used _\ba_\bf_\bt_\be_\br. | |
159 | ||
160 | F\bFI\bIL\bLE\bES\bS | |
161 | /usr/lib/uucp/L-devices | |
162 | /usr/lib/uucp/UUAIDS/L-devices L-devices example | |
163 | ||
164 | S\bSE\bEE\bE A\bAL\bLS\bSO\bO | |
165 | uucp(1C), uux(1C), L.sys(5), uucico(8C) | |
166 | ||
167 | ||
168 | ||
169 | ||
170 | ||
171 | ||
172 | ||
173 | ||
174 | ||
175 | ||
176 | ||
177 | ||
178 | ||
179 | ||
180 | ||
181 | ||
182 | ||
183 | ||
184 | ||
185 | ||
186 | ||
187 | ||
188 | ||
189 | ||
190 | ||
191 | ||
192 | ||
193 | ||
194 | ||
195 | Printed 7/9/88 April 24, 1986 3 | |
196 | ||
197 | ||
198 |