sccsids aren't executable kirk
[unix-history] / usr / src / sys / vax / mdec / upboot.c
CommitLineData
cb1c44c2
KM
1/*
2 * Copyright (c) 1980 Regents of the University of California.
3 * All rights reserved. The Berkeley software License Agreement
4 * specifies the terms and conditions for redistribution.
5 */
6
c7a945fd 7/* "@(#)upboot.c 6.3 (Berkeley) %G%" */
c8cf0b57
SL
8
9/*
10 * UP 1st level boot program: loads next 7.5Kbytes from
11 * boot sector of file system and sets it up to run.
12 * Always reads from drive 0.
13 */
14 .set BOOTSIZE,15 /* size of boot in sectors */
15 .set RELOC,0x50000
16 .set UPBPSECT,512 /* bytes per sector */
17 .set SID,62 /* system ID register */
18/* UBA registers */
19 .set UBA_CNFGR,0 /* UBA configuration register */
20 .set UBA_CR,4 /* UBA control register offset */
21 .set UBA_MAP,0x800 /* UBA offset to map reg's */
22 .set UBAinit,1 /* UBA init bit in UBA control reg */
23 .set pUBIC,16 /* Unibus init complete */
24/* UP registers and bits */
25 .set UP,0176700-0160000 /* address of UP controller */
26 .set UP_cs1,UP+0 /* control and status */
27 .set UP_wc,UP+2 /* word count */
28 .set UP_ba,UP+4 /* bus address */
29 .set UP_da,UP+6 /* disk address */
30 .set UP_cs2,UP+010 /* cs2 register */
31 .set UP_of,UP+032 /* offset register */
32 .set UP_dc,UP+034 /* desired cylinder */
33 .set UP_hr,UP+036 /* holding register */
34 .set UP_GO,1 /* go bit */
35 .set UP_PACK,022 /* pack acknowledge */
36 .set UP_DCLR,010 /* drive clear */
37 .set UP_PRESET,020 /* read-in-preset */
38 .set UP_RCOM,070 /* read command */
39 .set UPCS2_CLR,040
40 .set UP_pRDY,7 /* position of ready bit */
41 .set UP_pERR,15 /* position of error bit */
42 .set UP_FMT22,010000
43
44init:
45 .word 0 /* entry mask for dec monitor */
46 nop;nop;nop;nop;nop;nop;nop;nop /* some no-ops for 750 boot to skip */
47 nop;nop;
48/* get cpu type and find the first uba */
49 mfpr $SID,r0
50 extzv $24,$8,r0,r0 /* get cpu type */
51 ashl $2,r0,r1
52 movab physUBA,r2 /* get physUBA[cpu] */
53 addl2 r1,r2
54 movl (r2),r9
55 movab physUMEM,r2 /* get physUMEM[cpu] */
56 addl2 r1,r2
57 movl (r2),r10
58/* if 780, init uba */
59 cmpl r0,$1
60 bneq 2f
61 movl $UBAinit,UBA_CR(r9)
621:
63 bbc $pUBIC,UBA_CNFGR(r9),1b
642:
65 movl $5000000,r0
661:
67 sobgtr r0,1b
68/* init up, set vv in drive 0; if any errors, give up */
69 movw $UPCS2_CLR,UP_cs2(r10)
70 movw $UP_DCLR+UP_GO,UP_cs1(r10)
71 movw $UP_PRESET+UP_GO,UP_cs1(r10)
72 movw $UP_FMT22,UP_of(r10)
731:
74 movw UP_cs1(r10),r0
75 bbc $UP_pRDY,r0,1b
76/* relocate to high core */
77start:
78 movl r5,r11 /* boot flags */
79 movl $RELOC,sp
80 moval init,r6
81 movc3 $end,(r6),(sp)
82 jmp *$RELOC+start2
83/* now running relocated */
84 .set PROGSIZE,(BOOTSIZE*UPBPSECT)
85start2:
86 movw $0,UP_dc(r10)
87 movw $1,UP_da(r10)
88 movw $-PROGSIZE/2,UP_wc(r10)
89 clrl r0
901:
91 bisl3 $0x80000000,r0,UBA_MAP(r9)
92 addl2 $4,r9
93 aobleq $BOOTSIZE,r0,1b
94 clrw UP_ba(r10)
95 movw $UP_RCOM+UP_GO,UP_cs1(r10)
96uprdy:
97 movw UP_cs1(r10),r0
98 bbc $UP_pRDY,r0,uprdy
99clear:
100 movl $PROGSIZE,r3
101clrcor:
102 clrq (r3)
103 acbl $RELOC,$8,r3,clrcor
104/* run loaded program */
105 movl $2,r10 /* major("/dev/up0a") */
106 calls $0,*$0
107 brw start2
108physUBA:
109 .long 0
110 .long 0x20006000 /* 11/780 */
111 .long 0xf30000 /* 11/750 */
112 .long 0xf26000 /* 11/730 */
113physUMEM:
114 .long 0
115 .long 0x2013e000 /* 11/780 */
116 .long 0xffe000 /* 11/750 */
117 .long 0xffe000 /* 11/730 */
118end: