projects / unix-history / blame
| Commit | Line | Data |
|---|---|---|
| 430f81c3 | 1 | /* |
| ca67e7b4 | 2 | * @(#)psproto.h 7.1 (Berkeley) 5/21/88 |
| 430f81c3 | 3 | */ |
| a994cc4f SL |
4 | |
| 5 | /* | |
| 6 | * PS300-Host Handshake Protocol Definitions. | |
| 7 | */ | |
| 8 | ||
| 9 | /* | |
| 10 | * Commands sent from host->PS300. | |
| 11 | * | |
| 12 | * In the initial handshake carried out when requesting | |
| 13 | * one of these commands be performed, the PS300 always | |
| 14 | * returns the identical code to indicate success. | |
| 15 | */ | |
| 16 | #define PS_ABORT 0x1000 /* abort current command */ | |
| 17 | #define PS_RESET 0x3000 /* reset device */ | |
| 18 | #define PS_RDNET 0x5000 /* logical read */ | |
| 19 | #define PS_LOOKUP 0x8000 /* name lookup */ | |
| 20 | #define PS_RDPHY 0x9000 /* physical read */ | |
| 21 | #define PS_WRPHY_SYNC 0xa000 /* physical write w/ sync */ | |
| 22 | #define PS_WRPHY 0xb000 /* physical write */ | |
| 23 | #define PS_WRNET 0xc000 /* logical write */ | |
| 24 | #define PS_DETACH 0xd000 /* normal/diagnostic detach */ | |
| 25 | #define PS_ATTACH 0xe000 /* normal attach */ | |
| 26 | #define PS_DATTACH 0xf000 /* diagnostic attach */ | |
| 27 | ||
| 28 | #define PS_DIOREAD 0x4000 /* internal, wait for dioread attention */ | |
| 29 | ||
| 30 | /* | |
| 31 | * Command responses from PS300->host. | |
| 32 | */ | |
| 33 | #define PS_DMAOK(code) ((code)|0x0a00) /* successful dma transfer */ | |
| 34 | #define PS_ADROK(code) ((code)|0x0100) /* successful address tranfer */ | |
| 35 | ||
| 36 | #define PS_CODE(v) ((v)&0xf000) /* extract code from PS300 msg */ | |
| 37 | #define PS_LUNIT(v) ((v)&0x000f) /* extract PS300 unit from msg */ | |
| 38 | ||
| 39 | /* | |
| 40 | * Single unit PS300 address list. | |
| 41 | */ | |
| 42 | struct psalist { | |
| 43 | u_short nblocks; /* # of i/o vectors (we always use 1) */ | |
| 44 | u_short addr[2]; /* PS300 address */ | |
| 45 | u_short wc; /* transfer size */ | |
| 46 | }; | |
| 47 | ||
| 48 | /* | |
| 49 | * The max dma size is actually 64KB, but | |
| 50 | * we limit it to be just large enough for | |
| 51 | * the maximum vector list as this is sufficient | |
| 52 | * for our needs and we must allocate real | |
| 53 | * memory to the intermediate buffer. | |
| 54 | */ | |
| 55 | #define PS_MAXDMA (1024+2048*12) | |
| 56 | ||
| 57 | /* | |
| 58 | * Pseudo commands used internally by the driver. | |
| 59 | */ | |
| 60 | #define PS_DMAOUT 0x0100 /* dma buffer host->PS300 */ | |
| 61 | #define PS_DMAIN 0x0200 /* dma buffer PS300->host */ | |
| 62 | ||
| 63 | /* | |
| 64 | * Default timeouts. | |
| 65 | */ | |
| 66 | #define PS_TIMEOUT 30 /* dma/attention timeout (in hz) */ | |
| 67 | #define PS_DIOTIMO 1000 /* dio polling timeout */ |