Add copyright
[unix-history] / usr / src / sys / vax / mdec / upboot.c
CommitLineData
cb1c44c2
KM
1/*
2 * Copyright (c) 1980 Regents of the University of California.
3 * All rights reserved. The Berkeley software License Agreement
4 * specifies the terms and conditions for redistribution.
5 */
6
7#ifndef lint
8_sccsid:.asciz "@(#)upboot.c 6.2 (Berkeley) %G%"
9#endif not lint
c8cf0b57
SL
10
11/*
12 * UP 1st level boot program: loads next 7.5Kbytes from
13 * boot sector of file system and sets it up to run.
14 * Always reads from drive 0.
15 */
16 .set BOOTSIZE,15 /* size of boot in sectors */
17 .set RELOC,0x50000
18 .set UPBPSECT,512 /* bytes per sector */
19 .set SID,62 /* system ID register */
20/* UBA registers */
21 .set UBA_CNFGR,0 /* UBA configuration register */
22 .set UBA_CR,4 /* UBA control register offset */
23 .set UBA_MAP,0x800 /* UBA offset to map reg's */
24 .set UBAinit,1 /* UBA init bit in UBA control reg */
25 .set pUBIC,16 /* Unibus init complete */
26/* UP registers and bits */
27 .set UP,0176700-0160000 /* address of UP controller */
28 .set UP_cs1,UP+0 /* control and status */
29 .set UP_wc,UP+2 /* word count */
30 .set UP_ba,UP+4 /* bus address */
31 .set UP_da,UP+6 /* disk address */
32 .set UP_cs2,UP+010 /* cs2 register */
33 .set UP_of,UP+032 /* offset register */
34 .set UP_dc,UP+034 /* desired cylinder */
35 .set UP_hr,UP+036 /* holding register */
36 .set UP_GO,1 /* go bit */
37 .set UP_PACK,022 /* pack acknowledge */
38 .set UP_DCLR,010 /* drive clear */
39 .set UP_PRESET,020 /* read-in-preset */
40 .set UP_RCOM,070 /* read command */
41 .set UPCS2_CLR,040
42 .set UP_pRDY,7 /* position of ready bit */
43 .set UP_pERR,15 /* position of error bit */
44 .set UP_FMT22,010000
45
46init:
47 .word 0 /* entry mask for dec monitor */
48 nop;nop;nop;nop;nop;nop;nop;nop /* some no-ops for 750 boot to skip */
49 nop;nop;
50/* get cpu type and find the first uba */
51 mfpr $SID,r0
52 extzv $24,$8,r0,r0 /* get cpu type */
53 ashl $2,r0,r1
54 movab physUBA,r2 /* get physUBA[cpu] */
55 addl2 r1,r2
56 movl (r2),r9
57 movab physUMEM,r2 /* get physUMEM[cpu] */
58 addl2 r1,r2
59 movl (r2),r10
60/* if 780, init uba */
61 cmpl r0,$1
62 bneq 2f
63 movl $UBAinit,UBA_CR(r9)
641:
65 bbc $pUBIC,UBA_CNFGR(r9),1b
662:
67 movl $5000000,r0
681:
69 sobgtr r0,1b
70/* init up, set vv in drive 0; if any errors, give up */
71 movw $UPCS2_CLR,UP_cs2(r10)
72 movw $UP_DCLR+UP_GO,UP_cs1(r10)
73 movw $UP_PRESET+UP_GO,UP_cs1(r10)
74 movw $UP_FMT22,UP_of(r10)
751:
76 movw UP_cs1(r10),r0
77 bbc $UP_pRDY,r0,1b
78/* relocate to high core */
79start:
80 movl r5,r11 /* boot flags */
81 movl $RELOC,sp
82 moval init,r6
83 movc3 $end,(r6),(sp)
84 jmp *$RELOC+start2
85/* now running relocated */
86 .set PROGSIZE,(BOOTSIZE*UPBPSECT)
87start2:
88 movw $0,UP_dc(r10)
89 movw $1,UP_da(r10)
90 movw $-PROGSIZE/2,UP_wc(r10)
91 clrl r0
921:
93 bisl3 $0x80000000,r0,UBA_MAP(r9)
94 addl2 $4,r9
95 aobleq $BOOTSIZE,r0,1b
96 clrw UP_ba(r10)
97 movw $UP_RCOM+UP_GO,UP_cs1(r10)
98uprdy:
99 movw UP_cs1(r10),r0
100 bbc $UP_pRDY,r0,uprdy
101clear:
102 movl $PROGSIZE,r3
103clrcor:
104 clrq (r3)
105 acbl $RELOC,$8,r3,clrcor
106/* run loaded program */
107 movl $2,r10 /* major("/dev/up0a") */
108 calls $0,*$0
109 brw start2
110physUBA:
111 .long 0
112 .long 0x20006000 /* 11/780 */
113 .long 0xf30000 /* 11/750 */
114 .long 0xf26000 /* 11/730 */
115physUMEM:
116 .long 0
117 .long 0x2013e000 /* 11/780 */
118 .long 0xffe000 /* 11/750 */
119 .long 0xffe000 /* 11/730 */
120end: