getting reassembly to work
[unix-history] / usr / src / sys / vax / if / if_acc.c
CommitLineData
a0b7c7fb 1/* if_acc.c 4.2 82/02/01 */
28081cf8
SL
2
3#include "acc.h"
4#ifdef NACC > 0
5
6/*
7 * ACC LH/DH ARPAnet IMP interface driver.
8 */
9
10#include "../h/param.h"
11#include "../h/systm.h"
12#include "../h/mbuf.h"
13#include "../h/pte.h"
14#include "../h/buf.h"
15#include "../h/protosw.h"
16#include "../h/socket.h"
17#include "../h/ubareg.h"
18#include "../h/ubavar.h"
19#include "../h/accreg.h"
20#include "../h/cpu.h"
21#include "../h/mtpr.h"
22#include "../h/vmmac.h"
23#include "../net/in.h"
24#include "../net/in_systm.h"
25#include "../net/if.h"
26#include "../net/if_imp.h"
27#include "../net/if_uba.h"
28
29int accprobe(), accattach(), accrint(), accxint();
30struct uba_device *accinfo[NACC];
31u_short accstd[] = { 0 };
32struct uba_driver accdriver =
33 { accprobe, 0, accattach, 0, accstd, "acc", accinfo };
34#define ACCUNIT(x) minor(x)
35
36int accinit(), accstart(), accreset();
37
38/*
39 * "Lower half" of IMP interface driver.
40 *
41 * Each IMP interface is handled by a common module which handles
42 * the IMP-host protocol and a hardware driver which manages the
43 * hardware specific details of talking with the IMP.
44 *
45 * The hardware portion of the IMP driver handles DMA and related
46 * management of UNIBUS resources. The IMP protocol module interprets
47 * contents of these messages and "controls" the actions of the
48 * hardware module during IMP resets, but not, for instance, during
49 * UNIBUS resets.
50 *
51 * The two modules are coupled at "attach time", and ever after,
52 * through the imp interface structure. Higher level protocols,
53 * e.g. IP, interact with the IMP driver, rather than the ACC.
54 */
55struct acc_softc {
56 struct ifnet *acc_if; /* pointer to IMP's ifnet struct */
57 struct impcb *acc_ic; /* data structure shared with IMP */
58 struct ifuba acc_ifuba; /* UNIBUS resources */
59 struct mbuf *acc_iq; /* input reassembly queue */
60 short acc_olen; /* size of last message sent */
61 char acc_flush; /* flush remainder of message */
28081cf8
SL
62} acc_softc[NACC];
63
64/*
65 * Reset the IMP and cause a transmitter interrupt by
66 * performing a null DMA.
67 */
68accprobe(reg)
69 caddr_t reg;
70{
71 register int br, cvec; /* r11, r10 value-result */
72 register struct accdevice *addr = (struct accdevice *)reg;
73
74COUNT(ACCPROBE);
75#ifdef lint
76 br = 0; cvec = br; br = cvec;
77 accrint(0); accxint(0);
78#endif
79 addr->acc_icsr = ACC_RESET;
80 DELAY(500000);
81 addr->acc_ocsr = ACC_RESET;
82 DELAY(500000);
83
84 addr->acc_ocsr = OUT_BBACK;
85 DELAY(500000);
86 addr->acc_owc = 0;
87 addr->acc_ocsr = ACC_IE | ACC_GO;
88 DELAY(500000);
89 addr->acc_ocsr = 0;
90 /* interrupt was for transmit, push back to receive vector */
91 if (cvec && cvec != 0x200)
92 cvec -= 4;
93 return (1);
94}
95
96/*
97 * Call the IMP module to allow it to set up its internal
98 * state, then tie the two modules together by setting up
99 * the back pointers to common data structures.
100 */
101accattach(ui)
102 struct uba_device *ui;
103{
104 register struct acc_softc *sc = &acc_softc[ui->ui_unit];
105 register struct impcb *ip;
106 struct ifimpcb {
107 struct ifnet ifimp_if;
108 struct impcb ifimp_impcb;
109 } *ifimp;
110
111COUNT(ACCATTACH);
112 if ((ifimp = (struct ifimpcb *)impattach(ui)) == 0)
113 panic("accattach"); /* XXX */
114 sc->acc_if = &ifimp->ifimp_if;
115 ip = &ifimp->ifimp_impcb;
116 sc->acc_ic = ip;
117 ip->ic_init = accinit;
118 ip->ic_start = accstart;
119}
120
121/*
122 * Reset interface after UNIBUS reset.
123 * If interface is on specified uba, reset its state.
124 */
125accreset(unit, uban)
126 int unit, uban;
127{
128 register struct uba_device *ui;
129 struct acc_softc *sc;
130
131COUNT(ACCRESET);
132 if (unit >= NACC || (ui = accinfo[unit]) == 0 || ui->ui_alive == 0 ||
133 ui->ui_ubanum != uban)
134 return;
135 printf(" acc%d", unit);
136 sc = &acc_softc[unit];
137 /* must go through IMP to allow it to set state */
138 (*sc->acc_if->if_init)(unit);
139}
140
141/*
142 * Initialize interface: clear recorded pending operations,
143 * and retrieve, and reinitialize UNIBUS resources.
144 */
145accinit(unit)
146 int unit;
147{
148 register struct acc_softc *sc = &acc_softc[unit];
149 register struct uba_device *ui = accinfo[unit];
150 register struct accdevice *addr;
151 int x, info;
152
153COUNT(ACCINIT);
154 if (if_ubainit(&sc->acc_ifuba, ui->ui_ubanum,
155 sizeof(struct imp_leader), (int)btop(IMP_MTU)) == 0) {
156 printf("acc%d: can't initialize\n", unit);
157 return;
158 }
159 addr = (struct accdevice *)ui->ui_addr;
160
a0b7c7fb
SL
161 /*
162 * Reset the imp interface.
163 * the delays are totally guesses
164 */
28081cf8
SL
165 x = spl5();
166 addr->acc_icsr = ACC_RESET;
a0b7c7fb 167 DELAY(100);
28081cf8 168 addr->acc_ocsr = ACC_RESET;
a0b7c7fb 169 DELAY(1000);
28081cf8 170 addr->acc_ocsr = OUT_BBACK; /* reset host master ready */
a0b7c7fb 171 DELAY(1000);
28081cf8
SL
172 addr->acc_ocsr = 0;
173 addr->acc_icsr = IN_MRDY; /* close the relay */
174 splx(x);
175
176 /* YECH!!! */
177 while ((addr->acc_icsr & IN_HRDY) == 0 ||
178 (addr->acc_icsr & (IN_RMR | IN_IMPBSY))) {
179 /* keep turning IN_RMR off */
180 addr->acc_icsr = IN_MRDY;
a0b7c7fb 181 sleep((caddr_t)&lbolt, PZERO); /* ??? */
28081cf8
SL
182 }
183
184 /*
185 * Put up a read. We can't restart any outstanding writes
186 * until we're back in synch with the IMP (i.e. we've flushed
187 * the NOOPs it throws at us).
188 */
189 x = spl5();
190 info = sc->acc_ifuba.ifu_r.ifrw_info;
191 addr->acc_iba = (u_short)info;
192 addr->acc_iwc = -(sizeof(struct imp_leader) + IMP_MTU) >> 1;
193 addr->acc_icsr =
194 IN_MRDY | ACC_IE | IN_WEN | ((info & 0x30000) >> 12) | ACC_GO;
195 splx(x);
196}
197
198/*
199 * Start output on an interface.
200 */
201accstart(dev)
202 dev_t dev;
203{
204 int unit = ACCUNIT(dev), info;
205 struct uba_device *ui = accinfo[unit];
206 register struct acc_softc *sc = &acc_softc[unit];
207 register struct accdevice *addr;
208 struct mbuf *m;
209 u_short cmd;
210
211COUNT(ACCSTART);
212 if (sc->acc_ic->ic_oactive)
213 goto restart;
214
215 /*
216 * Not already active, deqeue a request and
217 * map it onto the UNIBUS. If no more
218 * requeusts, just return.
219 */
220 IF_DEQUEUE(&sc->acc_if->if_snd, m);
221 if (m == 0) {
222 sc->acc_ic->ic_oactive = 0;
223 return;
224 }
225 sc->acc_olen = if_wubaput(&sc->acc_ifuba, m);
226
227restart:
228 /*
229 * Have request mapped to UNIBUS for transmission.
230 * Purge any stale data from the BDP, and start the output.
231 */
232 UBAPURGE(sc->acc_ifuba.ifu_uba, sc->acc_ifuba.ifu_w.ifrw_bdp);
233 addr = (struct accdevice *)ui->ui_addr;
234 info = sc->acc_ifuba.ifu_w.ifrw_info;
235 addr->acc_oba = (u_short)info;
236 addr->acc_owc = -((sc->acc_olen + 1) >> 1);
237 cmd = ACC_IE | OUT_ENLB | ((info & 0x30000) >> 12) | ACC_GO;
238 addr->acc_ocsr = cmd;
239 sc->acc_ic->ic_oactive = 1;
240}
241
242/*
243 * Output interrupt handler.
244 */
245accxint(unit)
246{
247 register struct uba_device *ui = accinfo[unit];
248 register struct acc_softc *sc = &acc_softc[unit];
249 register struct accdevice *addr;
250
251COUNT(ACCXINT);
252 if (sc->acc_ic->ic_oactive == 0) {
a0b7c7fb 253 printf("acc%d: stray send interrupt\n", unit);
28081cf8
SL
254 return;
255 }
256 addr = (struct accdevice *)ui->ui_addr;
257 sc->acc_if->if_opackets++;
258 sc->acc_ic->ic_oactive = 0;
a0b7c7fb
SL
259 if (addr->acc_ocsr & ACC_ERR) {
260 printf("acc%d: send error, csr=%b\n", unit,
28081cf8 261 addr->acc_ocsr, ACC_OUTBITS);
28081cf8 262 sc->acc_if->if_oerrors++;
a0b7c7fb
SL
263 }
264 if (sc->acc_if->if_snd.ifq_head == 0) {
28081cf8
SL
265 if (sc->acc_ifuba.ifu_xtofree) {
266 m_freem(sc->acc_ifuba.ifu_xtofree);
267 sc->acc_ifuba.ifu_xtofree = 0;
268 }
269 return;
270 }
271 accstart(unit);
272}
273
274/*
275 * Input interrupt handler
276 */
277accrint(unit)
278{
279 register struct acc_softc *sc = &acc_softc[unit];
280 register struct accdevice *addr;
281 register struct ifqueue *inq;
282 struct mbuf *m;
283 int len, info;
284
285COUNT(ACCRINT);
286 sc->acc_if->if_ipackets++;
287
288 /*
289 * Purge BDP; flush message if error indicated.
290 */
291 UBAPURGE(sc->acc_ifuba.ifu_uba, sc->acc_ifuba.ifu_r.ifrw_bdp);
292 addr = (struct accdevice *)accinfo[unit]->ui_addr;
293 if (addr->acc_icsr & ACC_ERR) {
294 printf("acc%d: recv error, csr=%b\n", unit,
295 addr->acc_icsr, ACC_INBITS);
296 sc->acc_if->if_ierrors++;
297 sc->acc_flush = 1;
298 }
299
300 if (sc->acc_flush) {
301 if (addr->acc_icsr & IN_EOM)
302 sc->acc_flush = 0;
303 goto setup;
304 }
305 len = sizeof(struct imp_leader) + (addr->acc_iwc << 1);
306
307 /*
308 * The last parameter is always 0 since using
309 * trailers on the ARPAnet is insane.
310 */
311 m = if_rubaget(&sc->acc_ifuba, len, 0);
312 if (m == 0)
313 goto setup;
314 if ((addr->acc_icsr & IN_EOM) == 0) {
a0b7c7fb 315 if (sc->acc_iq)
28081cf8 316 m_cat(sc->acc_iq, m);
a0b7c7fb 317 else
28081cf8 318 sc->acc_iq = m;
28081cf8
SL
319 goto setup;
320 }
321 /* adjust message length for padding. */
322 m->m_len -= 2;
a0b7c7fb 323 if (sc->acc_iq) {
28081cf8
SL
324 m_cat(sc->acc_iq, m);
325 m = sc->acc_iq;
326 sc->acc_iq = 0;
28081cf8
SL
327 }
328 impinput(unit, m);
329
330setup:
331 /*
332 * Setup for next message.
333 */
334 info = sc->acc_ifuba.ifu_r.ifrw_info;
335 addr->acc_iba = (u_short)info;
336 addr->acc_iwc = - (sizeof(struct imp_leader) + IMP_MTU) >> 1;
337 addr->acc_icsr =
338 IN_MRDY | ACC_IE | IN_WEN | ((info & 0x30000) >> 12) | ACC_GO;
339}
340#endif