Add a forgotten close. Failure happens in the update case, if there

[unix-history] / KNOWNBUGS

diff --git a/KNOWNBUGS b/KNOWNBUGS
index fc196f0..59c46c9 100644 (file)
--- a/KNOWNBUGS
+++ b/KNOWNBUGS
@@ -1,24 +1,76 @@
 This file lists known problems with this release of FreeBSD
 
 This file lists known problems with this release of FreeBSD
 

+'hanging keyboard'
+------------------
+There are still problems with certain machines appearing to 'hang' on
+bootup even though a prompt is there.  The most common machines that
+exhibit these problems are Gateway 2000 machines with PHOENIX bios's but
+other machines with PHOENIX bios also exhibit this behavior.
+       The temporary solution until you can get the distribution
+installed on your hard-drive is to 'bounce' on a key like shift or
+num-lock (which works well since you can see when the keyboard comes
+back to life) until the boot sequence is finished.  The keyboard will
+work fine for installing FreeBSD onto the hard-drive.
+       Generally the problems go away at this point, but if it doesn't
+you should install a SYSCONS kernel which doesn't experience these
+keyboard problems.
+

 /usr/bin/gdb:
        The gdb in the release will not work on shared objects nor will it
        work with C++ executables.  Please use the gdb in the ports area for
 /usr/bin/gdb:
        The gdb in the release will not work on shared objects nor will it
        work with C++ executables.  Please use the gdb in the ports area for

-       debugging shared and/or C++ code.
+       debugging shared and/or C++ code.  This is just a work-around until
+       we can transition to the new version of gdb completely.  See below.
+
+/usr/gnu/bin/gdb:
+       This is the gdb from the ports area (if installed), also known as
+       gdb-4.11.  There is a problem using gdb-4.11 to debug a core-file
+       generated by a binary which uses shared libraries. The problem is
+       basically due to the fact that the shared libraries are mmap'ed at
+       addresses in the memory space of the binary which are not accessible
+       to gdb-4.11 at the time that it tries to examine the core-file. This
+       usually manifests itself in "Cannot access memory at address <foo>"
+       messages at startup and "#0  <bar> in end ()" when you try to do
+       a backtrace ("bt").
+
+       Workaround: start gdb-4.11 without reference to the core-file,
+       e.g. "gdb fubar". Set a breakpoint in main and run the inferior
+       so that gdb-4.11 can resolve references to the shared libraries.
+       After this, use the "core-file" command to force gdb-4.11 to
+       load the core-file, e.g. "core-file fubar.core". Since all
+       shared library references were previously resolved gdb-4.11 can
+       now access the shared libraries and things like "bt" now work.
+       You will also be able to reference items previously on the stack
+       (from the core file), but all globals will show up as zero'd.
+       All these problems may be avoided if you compile the application
+       with -static.

 
 /sys/i386/isa/if_ep.c
        The 3c509 driver will hang under heavy network loads and take your
 
 /sys/i386/isa/if_ep.c
        The 3c509 driver will hang under heavy network loads and take your

-       machine off network.  (Though the machine will continue to run with
+       machine off the network.  (Though the machine will continue to run with

        no network facilities)
 
        no network facilities)
 

-/sys/i386/isa/syscons.c
-       This file will not compile correctly with the compiler distributed
-       in FreeBSD before version 1.1.  To compile a FreeBSD 1.1 kernel 
-       with a compiler from before FreeBSD 1.1, you will need to add
-       the `-D__FreeBSD__' flag to your kernel compiles; e.g.,
-               make CC='cc -D__FreeBSD__'
-       in /sys/compile/SYSCONS (or substitute the name of your
-       configuration.  Once you upgrade your compilation tools this
-       will no longer be necessary.
-       
-
-$Id: KNOWNBUGS,v 1.2 1994/02/09 05:25:23 nate Exp $
+       Workaround: Try a "ifconfig ep0 down" and a "ifconfig ep0 up"
+       to get it running again.
+
+/sys/i386/isa/bt742a.c
+       The Bt445S and Bt747 controllers can cause problems when ISA DMA
+       is selected as an option.  With the EISA controller the remedy is
+       easy - simply turn it off using your EISA configuration utility.
+       With the Bt445S, which is a VLB card, you must switch the undocumented
+       "SW10" on "SB2" to the off position.  Also note that certain revisions
+       of the Buslogic board (Revision C or earlier, firmware revision <3.37)
+       will cause DATA CORRUPTION with systems containing more than 16MB of
+       memory.  If you find this to be the case, temporarily remove your
+       extra memory and contact Buslogic for an upgrade!
+
+/usr/bin/find
+       find doesn't work on CDROM's. You need to call find with the
+       "fstype isofs" argument to get it working. The bug seems to be 
+       in the "fts(3)" routines that find uses.
+
+/usr/bin/awk
+       awk dumps core for the following command line "awk '' blubber".
+       Problem is already known by the gawk maintainers and will be fixed
+       in the next release of gawk.
+
+$Id: KNOWNBUGS,v 1.12 1994/03/29 08:52:55 jkh Exp $