add needed header files

[unix-history] / usr / src / sys / stand.att / saio.h

diff --git a/usr/src/sys/stand.att/saio.h b/usr/src/sys/stand.att/saio.h
index e0e7f87..c1843d9 100644 (file)
--- a/usr/src/sys/stand.att/saio.h
+++ b/usr/src/sys/stand.att/saio.h
@@ -1,11 +1,24 @@
 /*
 /*

- * Copyright (c) 1982, 1988 Regents of the University of California.
- * All rights reserved.  The Berkeley software License Agreement
- * specifies the terms and conditions for redistribution.
+ * Copyright (c) 1982, 1988 The Regents of the University of California.
+ * All rights reserved.

  *
  *

- *     @(#)saio.h      7.9 (Berkeley) %G%
+ * Redistribution and use in source and binary forms are permitted
+ * provided that the above copyright notice and this paragraph are
+ * duplicated in all such forms and that any documentation,
+ * advertising materials, and other materials related to such
+ * distribution and use acknowledge that the software was developed
+ * by the University of California, Berkeley.  The name of the
+ * University may not be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
+ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+ *
+ *     @(#)saio.h      7.14 (Berkeley) %G%

  */
 
  */
 

+#include "../ufs/fs.h"
+#include "../ufs/dinode.h"

 #include "saioctl.h"
 #include "saerrno.h"
 
 #include "saioctl.h"
 #include "saerrno.h"
 


@@ -13,7 +26,7 @@
 #define        NULL    0
 
 /*
 #define        NULL    0
 
 /*

- * Io block: includes an inode, cells for the use of seek, etc.,
+ * Io block: includes an dinode, cells for the use of seek, etc.,

  * and a buffer.
  */
 struct iob {
  * and a buffer.
  */
 struct iob {


@@ -23,9 +36,10 @@ struct iob {
        int     i_unit;         /* pseudo device unit */
        int     i_part;         /* disk partition */
        daddr_t i_boff;         /* block offset on device */
        int     i_unit;         /* pseudo device unit */
        int     i_part;         /* disk partition */
        daddr_t i_boff;         /* block offset on device */

-       struct  inode i_ino;    /* inode, if file */
+       struct  dinode i_ino;   /* dinode, if file */

        daddr_t i_cyloff;       /* cylinder offset on device */
        off_t   i_offset;       /* seek offset in file */
        daddr_t i_cyloff;       /* cylinder offset on device */
        off_t   i_offset;       /* seek offset in file */

+       dev_t   i_dev;          /* associated device */

        daddr_t i_bn;           /* 1st block # of next read */
        char    *i_ma;          /* memory address of i/o buffer */
        int     i_cc;           /* character count of transfer */
        daddr_t i_bn;           /* 1st block # of next read */
        char    *i_ma;          /* memory address of i/o buffer */
        int     i_cc;           /* character count of transfer */


@@ -38,6 +52,7 @@ struct iob {
                char dummy[SBSIZE];
        } i_un;
 };
                char dummy[SBSIZE];
        } i_un;
 };

+

 #define        i_fs    i_un.ui_fs
 #define        i_bus   i_adapt
 
 #define        i_fs    i_un.ui_fs
 #define        i_bus   i_adapt
 


@@ -46,14 +61,14 @@ struct iob {
 #define        HDR1_OKSCT      0xc000  /* sector ok */
 #define        HDR1_SSF        0x2000  /* skip sector flag */
 
 #define        HDR1_OKSCT      0xc000  /* sector ok */
 #define        HDR1_SSF        0x2000  /* skip sector flag */
 

-#define        F_READ          0x1     /* file opened for reading */
-#define        F_WRITE         0x2     /* file opened for writing */
-#define        F_ALLOC         0x4     /* buffer allocated */
-#define        F_FILE          0x8     /* file instead of device */
-#define        F_NBSF          0x10    /* no bad sector forwarding */
-#define        F_ECCLM         0x20    /* limit # of bits in ecc correction */
-#define        F_SSI           0x40    /* set skip sector inhibit */
-#define        F_SEVRE         0x80    /* Severe burnin (no retries, no ECC) */
+#define        F_READ          0x0001  /* file opened for reading */
+#define        F_WRITE         0x0002  /* file opened for writing */
+#define        F_ALLOC         0x0004  /* buffer allocated */
+#define        F_FILE          0x0008  /* file instead of device */
+#define        F_NBSF          0x0010  /* no bad sector forwarding */
+#define        F_ECCLM         0x0020  /* limit # of bits in ecc correction */
+#define        F_SSI           0x0040  /* set skip sector inhibit */
+#define        F_SEVRE         0x0080  /* Severe burnin (no retries, no ECC) */

 
 /* io types */
 #define        F_RDDATA        0x0100  /* read data */
 
 /* io types */
 #define        F_RDDATA        0x0100  /* read data */


@@ -64,9 +79,6 @@ struct iob {
 
 #define        F_TYPEMASK      0xff00
 
 
 #define        F_TYPEMASK      0xff00
 

-/*
- * Request codes. Must be the same as F_XXX above
- */

 #define        READ    F_READ
 #define        WRITE   F_WRITE
 
 #define        READ    F_READ
 #define        WRITE   F_WRITE