386BSD 0.1 development

[unix-history] / usr / src / usr.bin / tip / Makefile

diff --git a/usr/src/usr.bin/tip/Makefile b/usr/src/usr.bin/tip/Makefile
index ccab9ae..e68e838 100644 (file)
--- a/usr/src/usr.bin/tip/Makefile
+++ b/usr/src/usr.bin/tip/Makefile
@@ -1,29 +1,11 @@
-#
-# Copyright (c) 1988 The Regents of the University of California.
-# All rights reserved.
-#
-# Redistribution and use in source and binary forms are permitted
-# provided that the above copyright notice and this paragraph are
-# duplicated in all such forms and that any documentation,
-# advertising materials, and other materials related to such
-# distribution and use acknowledge that the software was developed
-# by the University of California, Berkeley.  The name of the
-# University may not be used to endorse or promote products derived
-# from this software without specific prior written permission.
-# THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
-# IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
-# WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
-#
-#      @(#)Makefile    5.8 (Berkeley) %G%
-#
-# make file for intermachine communications package
+#      @(#)Makefile    5.9 (Berkeley) 5/11/90

 #
 # Files are:
 #      /etc/remote             remote host description file
 #      /etc/phones             phone number file, owned by ${OWNER} and
 #
 # Files are:
 #      /etc/remote             remote host description file
 #      /etc/phones             phone number file, owned by ${OWNER} and

-#                                mode 6??
-#      ${ADM}/aculog           ACU accounting file, owned by ${OWNER} and
-#                                mode 6?? {if ACULOG defined}
+#                              mode 6??
+#      /var/log/aculog         ACU accounting file, owned by ${OWNER} and
+#                              mode 6?? {if ACULOG defined}

 # Presently supports:
 #      BIZCOMP
 #      DEC DF02-AC, DF03-AC
 # Presently supports:
 #      BIZCOMP
 #      DEC DF02-AC, DF03-AC


@@ -33,7 +15,6 @@
 #      VENTEL 212+
 #      VADIC 831 RS232 adaptor
 #      VADIC 3451
 #      VENTEL 212+
 #      VADIC 831 RS232 adaptor
 #      VADIC 3451

-# (drivers are located in aculib.a)

 #
 # Configuration defines:
 #      DF02, DF03, DN11        ACU's supported
 #
 # Configuration defines:
 #      DF02, DF03, DN11        ACU's supported


@@ -46,59 +27,23 @@
 #                              writes on local side
 #      BUFSIZ                  buffer sizing from stdio, must be fed
 #                              explicitly to remcap.c if not 1024
 #                              writes on local side
 #      BUFSIZ                  buffer sizing from stdio, must be fed
 #                              explicitly to remcap.c if not 1024

-ADM=   usr/adm
-CONFIG=        -DV831 -DVENTEL -DHAYES -DCOURIER
-CFLAGS=        -O -DDEFBR=1200 -DDEFFS=BUFSIZ -DACULOG -DPRISTINE
-LIBC=  /lib/libc.a
-SRCS=  acu.c acutab.c cmds.c cmdtab.c cu.c hunt.c log.c partab.c remcap.c \
-       remote.c tip.c tipout.c uucplock.c value.c vars.c
-OBJS=  acu.o acutab.o cmds.o cmdtab.o cu.o hunt.o log.o partab.o remcap.o \
-       remote.o tip.o tipout.o uucplock.o value.o vars.o
-MAN=   tip.0
-
-all: aculib/aculib.a tip
-
-tip: ${OBJS} ${LIBC}
-       ${CC} -o $@ ${OBJS} aculib/aculib.a
-
-# acutab is configuration dependent, and so depends on the makefile
-acutab.o: Makefile
-acutab.o: acutab.c
-       ${CC} -c ${CFLAGS} ${CONFIG} acutab.c

 
 

-# remote.o depends on the makefile because of DEFBR and DEFFS
-# log.o depends on the makefile because of ACULOG
-log.o remote.o: Makefile
-
-aculib/aculib.a: FRC
-       cd aculib; make ${MFLAGS}
-
-clean:
-       rm -f ${OBJS} core tip
-       cd aculib; make ${MFLAGS} clean
-
-cleandir: clean
-       rm -f ${MAN} tags .depend
-       cd aculib; make ${MFLAGS} cleandir
-
-depend:
-       mkdep ${CFLAGS} ${SRCS}
-       cd aculib; make ${MFLAGS} depend
-
-install: ${MAN}
-       cd aculib; make ${MFLAGS} install
-       install -s -o uucp -g dialer -m 4710 tip ${DESTDIR}/usr/bin
-       rm -f ${DESTDIR}/usr/bin/cu
-       ln ${DESTDIR}/usr/bin/tip ${DESTDIR}/usr/bin/cu
-       install -c -o bin -g bin -m 444 tip.0 ${DESTDIR}/usr/man/cat1
-       rm -f ${DESTDIR}/usr/man/cat1/cu.0
-       ln ${DESTDIR}/usr/man/cat1/tip.0 ${DESTDIR}/usr/man/cat1/cu.0
-
-lint: ${SRCS}
-       lint ${CFLAGS} ${SRCS}
+PROG=  tip
+CFLAGS+=-I${.CURDIR} -DV831 -DVENTEL -DHAYES -DCOURIER -DDEFBR=2400 \
+       -DDEFFS=BUFSIZ -DACULOG -DPRISTINE -DCONNECT
+.PATH: ${.CURDIR}/aculib
+BINOWN=        uucp
+BINGRP=        dialer
+BINMODE=4510
+LINKS= ${BINDIR}/tip ${BINDIR}/cu
+MLINKS=        tip.1 cu.1
+SRCS=  acu.c acutab.c cmds.c cmdtab.c cu.c hunt.c log.c partab.c remcap.c \
+       remote.c tip.c tipout.c uucplock.c value.c vars.c biz22.c courier.c \
+       df.c dn11.c hayes.c v3451.c v831.c ventel.c

 
 

-tags: ${SRCS}
-       ctags ${SRCS}
-       cd aculib; make ${MFLAGS} tags
+# -- acutab is configuration dependent, and so depends on the Makefile
+# -- remote.o depends on the Makefile because of DEFBR and DEFFS
+# -- log.o depends on the Makefile because of ACULOG
+acutab.o log.o remote.o: Makefile

 
 

-FRC:
+.include <bsd.prog.mk>