1. Remove a rather strangely gratuitous bit of profanity
[unix-history] / KNOWNBUGS
index 77c1954..f38df55 100644 (file)
--- a/KNOWNBUGS
+++ b/KNOWNBUGS
@@ -11,9 +11,6 @@ installed on your hard-drive is to 'bounce' on a key like shift or
 num-lock (which works well since you can see when the keyboard comes
 back to life) until the boot sequence is finished.  The keyboard will
 work fine for installing FreeBSD onto the hard-drive.
 num-lock (which works well since you can see when the keyboard comes
 back to life) until the boot sequence is finished.  The keyboard will
 work fine for installing FreeBSD onto the hard-drive.
-       Generally the problems go away at this point, but if it doesn't
-you should install a SYSCONS kernel which doesn't experience these
-keyboard problems.
 
 /usr/bin/gdb:
        The gdb in the release will not work on shared objects nor will it
 
 /usr/bin/gdb:
        The gdb in the release will not work on shared objects nor will it
@@ -52,18 +49,6 @@ keyboard problems.
        Workaround: Try a "ifconfig ep0 down" and a "ifconfig ep0 up"
        to get it running again.
 
        Workaround: Try a "ifconfig ep0 down" and a "ifconfig ep0 up"
        to get it running again.
 
-
-/sys/i386/boot
-       DO NOT ATTEMPT TO REBUILD THE BOOT BLOCKS.  There is currently
-       a problem in that the boot block code has grown and if you build
-       it with the new version of as and install them you will NOT BE
-       ABLE TO BOOT YOUR SYSTEM.  This problem will be fixed before
-       the 1.1 release is ship, and should only exist with the 1.1 BETA
-       release.
-
-       The boot block binaries shipped with the 1.1 BETA release were
-       built using an older version of as and can be installed safely.
-
 /sys/i386/isa/bt742a.c
        The Bt445S and Bt747 controllers can cause problems when ISA DMA
        is selected as an option.  With the EISA controller the remedy is
 /sys/i386/isa/bt742a.c
        The Bt445S and Bt747 controllers can cause problems when ISA DMA
        is selected as an option.  With the EISA controller the remedy is
@@ -75,14 +60,14 @@ keyboard problems.
        memory.  If you find this to be the case, temporarily remove your
        extra memory and contact Buslogic for an upgrade!
 
        memory.  If you find this to be the case, temporarily remove your
        extra memory and contact Buslogic for an upgrade!
 
-/usr/bin/find
-       find doesn't work on CDROM's. You need to call find with the
-       "fstype isofs" argument to get it working. The bug seems to be 
-       in the "fts(3)" routines that find uses.
-
-/usr/bin/awk
-       awk dumps core for the following command line "awk '' blubber".
-       Problem is already known by the gawk maintainers and will be fixed
-       in the next release of gawk.
+fsck:
+       fsck can go into an endless loop in the repair/fsck cycle on
+       a corrupted filesystem. The message "VALUES IN SUPER BLOCK
+       DISAGREE WITH THOSE IN FIRST ALTERNATE" is very misleading.
+       fsck compares the superblock with the alternate in the last
+       cylinder group? So if this block is corrupt, you have no chance
+       to get the filesystem repaired. You can answer on the question
+       "UPDATE STANDARD SUPERBLOCK" with yes and get always the same
+       error message on the next fsck.
 
 
-$Id: KNOWNBUGS,v 1.11 1994/03/22 16:43:58 jkh Exp $
+$Id: KNOWNBUGS,v 1.15 1994/06/03 22:22:41 ats Exp $