-/*
- * Modification history
- *
- * Revision 2.14 1993/11/22 10:55:30 davidg
- * change all splnet's to splimp's
- *
- * Revision 2.13 1993/11/22 10:53:52 davidg
- * patch to add support for SMC8216 (Elite-Ultra) boards
- * from Glen H. Lowe
- *
- * Revision 2.12 1993/11/07 18:04:13 davidg
- * fix from Garrett Wollman:
- * add a return(0) at the end of ed_probe so that if the various device
- * specific probes fail that we just don't fall of the end of the function.
- *
- * Revision 2.11 1993/10/23 04:21:03 davidg
- * Novell probe changed to be invasive because of too many complaints
- * about some clone boards not being reset properly and thus not
- * found on a warmboot. Yuck.
- *
- * Revision 2.10 1993/10/23 04:07:12 davidg
- * increment output errors if the device times out (done via watchdog)
- *
- * Revision 2.9 1993/10/23 04:01:45 davidg
- * increment input error counter if a packet with a bad length is
- * detected.
- *
- * Revision 2.8 1993/10/15 10:59:56 davidg
- * increase maximum time to wait for transmit DMA to complete to 120us.
- * call ed_reset() if the time limit is reached instead of trying
- * to abort the remote DMA.
- *
- * Revision 2.7 1993/10/15 10:49:10 davidg
- * minor change to way the mbuf pointer temp variable is assigned in
- * ed_start (slightly improves code readability)
- *
- * Revision 2.6 93/10/02 01:12:20 davidg
- * use ETHER_ADDR_LEN in NE probe rather than '6'.
- *
- * Revision 2.5 93/09/30 17:44:14 davidg
- * patch from vak@zebub.msk.su (Serge V.Vakulenko) to work around
- * a hardware bug in cheap WD clone boards where the PROM checksum
- * byte is always zero
- *
- * Revision 2.4 93/09/29 21:24:30 davidg
- * Added software NIC reset in NE probe to work around a problem
- * with some NE boards where the 8390 doesn't reset properly on
- * power-up. Remove initialization of IMR/ISR in the NE probe
- * because this is inherent in the reset.
- *
- * Revision 2.3 93/09/29 15:10:16 davidg
- * credit Charles Hannum
- *
- * Revision 2.2 93/09/29 13:23:25 davidg
- * added no multi-buffer override for 3c503
- *
- * Revision 2.1 93/09/29 12:32:12 davidg
- * changed multi-buffer count for 16bit 3c503's from 5 to 2 after
- * noticing that the transmitter becomes idle because of so many
- * packets to load.
- *
- * Revision 2.0 93/09/29 00:00:19 davidg
- * many changes, rewrites, additions, etc. Now supports the
- * NE1000, NE2000, WD8003, WD8013, 3C503, 16bit 3C503, and
- * a variety of similar clones. 16bit 3c503 now does multi
- * transmit buffers. Nearly every part of the driver has
- * changed in some way since rev 1.30.
- *
- * Revision 1.1 93/06/14 22:21:24 davidg
- * Beta release of device driver for SMC/WD80x3 and 3C503 ethernet boards.
- *
- */
-