BSD 4_4_Lite2 release

[unix-history] / usr / src / share / doc / smm / 01.setup / 2.t

diff --git a/usr/src/share/doc/smm/01.setup/2.t b/usr/src/share/doc/smm/01.setup/2.t
index ddc4f7e..4979286 100644 (file)
--- a/usr/src/share/doc/smm/01.setup/2.t
+++ b/usr/src/share/doc/smm/01.setup/2.t
@@ -29,7 +29,7 @@
 .\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 .\" SUCH DAMAGE.
 .\"
 .\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 .\" SUCH DAMAGE.
 .\"

-.\"    @(#)2.t 8.1 (Berkeley) 7/27/93
+.\"    @(#)2.t 8.3 (Berkeley) 6/13/94

 .\"
 .ds lq ``
 .ds rq ''
 .\"
 .ds lq ``
 .ds rq ''


@@ -601,6 +601,7 @@ Also, if you are loading on a single disk with the default disklabel,
 should be restored to the ``f'' partition and
 .Pn /usr
 to the ``e'' partition.
 should be restored to the ``f'' partition and
 .Pn /usr
 to the ``e'' partition.

+.ne 1i

 .Sh 2 "Booting the SPARC"
 .Sh 3 "Supported hardware"
 .LP
 .Sh 2 "Booting the SPARC"
 .Sh 3 "Supported hardware"
 .LP


@@ -626,7 +627,7 @@ SPARCstation Lance (le).
 T}
 _
 GRAPHICS       T{
 T}
 _
 GRAPHICS       T{

-bwtwo and cgthree.
+bwtwo, cgthree, and the GX (cgsix).

 T}
 _
 INPUT  T{
 T}
 _
 INPUT  T{


@@ -643,7 +644,6 @@ T}
 .LP
 Major items that are not supported include
 anything VME-based,
 .LP
 Major items that are not supported include
 anything VME-based,

-the GX (cgsix) display,

 the floppy disk, and SCSI tapes.
 .Sh 3 "Limitations"
 .LP
 the floppy disk, and SCSI tapes.
 .Sh 3 "Limitations"
 .LP


@@ -662,7 +662,7 @@ The \*(4B SPARC kernel does not remap SCSI IDs.  A SCSI disk at
 target 0 will become ``sd0'', where in SunOS the same disk will
 normally be called ``sd3''.  If your existing SunOS system is
 diskful, it will be least painful to have SunOS running on the disk
 target 0 will become ``sd0'', where in SunOS the same disk will
 normally be called ``sd3''.  If your existing SunOS system is
 diskful, it will be least painful to have SunOS running on the disk

-on target 0 lun 0 and put \*(4B on the disk on target 3 lun 0.  Both
+on target 3 lun 0 and put \*(4B on the disk on target 0 lun 0.  Both

 systems will then think they are running on ``sd0'', and you can
 boot either system as needed simply by changing the EEPROM's boot
 device.
 systems will then think they are running on ``sd0'', and you can
 boot either system as needed simply by changing the EEPROM's boot
 device.


@@ -794,6 +794,7 @@ SunOS system:
 The SunOS compiler and linker should be able to produce SunOS binaries
 under \*(4B, but this has not been tested.  If you plan to try it you
 will need the appropriate .sa files as well.
 The SunOS compiler and linker should be able to produce SunOS binaries
 under \*(4B, but this has not been tested.  If you plan to try it you
 will need the appropriate .sa files as well.

+.ne 1i

 .Sh 2 "Booting the DECstation"
 .Sh 3 "Supported hardware"
 .LP
 .Sh 2 "Booting the DECstation"
 .Sh 3 "Supported hardware"
 .LP


@@ -967,6 +968,7 @@ Label the disk.
 .DE
 Supported disk types are listed in
 .Pn /etc/disktab .
 .DE
 Supported disk types are listed in
 .Pn /etc/disktab .

+.ne 1i

 .IP 2)
 Restore the root filesystem.
 .DS
 .IP 2)
 Restore the root filesystem.
 .DS