Initial commit of OpenSPARC T2 design and verification files.
[OpenSPARC-T2-DV] / verif / diag / assembly / arch / error / l2 / n2_err_l2_Stuck0.s
/*
* ========== Copyright Header Begin ==========================================
*
* OpenSPARC T2 Processor File: n2_err_l2_Stuck0.s
* Copyright (C) 1995-2007 Sun Microsystems, Inc. All Rights Reserved
* 4150 Network Circle, Santa Clara, California 95054, U.S.A.
*
* DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
* For the avoidance of doubt, and except that if any non-GPL license
* choice is available it will apply instead, Sun elects to use only
* the General Public License version 2 (GPLv2) at this time for any
* software where a choice of GPL license versions is made
* available with the language indicating that GPLv2 or any later version
* may be used, or where a choice of which version of the GPL is applied is
* otherwise unspecified.
*
* Please contact Sun Microsystems, Inc., 4150 Network Circle, Santa Clara,
* CA 95054 USA or visit www.sun.com if you need additional information or
* have any questions.
*
*
* ========== Copyright Header End ============================================
*/
#define MAIN_PAGE_HV_ALSO
#define L2_ENTRY_PA 0x517590000
#define TEST_DATA 0x555555555555555
#define L2_ES_W1C_VALUE 0xc03ffff800000000
#define MCUES_PA0 0x8400000280
#include "hboot.s"
#include "asi_s.h"
#include "err_defines.h"
.text
.global main
main:
! Boot code does not provide TLB translation for IO address space
ta T_CHANGE_HPRIV
setx L2_ES_W1C_VALUE, %l0, %g4
! Now access L2 control and status registers
disable_l1:
ldxa [%g0] ASI_LSU_CONTROL, %l0
! Remove the lower 2 bits (I-Cache and D-Cache enables)
andn %l0, 0x3, %l0
stxa %l0, [%g0] ASI_LSU_CONTROL
! Write 1 to clear L2 Error status registers
clear_MCU_ESR:
! setx MCUES_PA0, %l3, %l4
setx L2ES_PA0,%l3, %l4
stx %g4, [%l4]
nop
set_L2_Directly_Mapped_Mode:
setx L2CS_PA0, %l6, %g1
mov 0x2, %l0
stx %l0, [%g1]
store_l2_way:
setx TEST_DATA, %l0, %g5
setx 0x2020000000, %l0, %g1
stx %g5, [%g1]
stx %g5, [%g1+8]
membar #Sync
first_load:
ldx [%g1], %l1
membar #Sync
second_load:
setx 0x2021000000, %l0, %g2
ldx [%g2], %i4
membar #Sync
load_to_mem:
ldx [%g1], %l1
membar #Sync
another_first_load:
setx 0x2020000100, %l0, %g1
stx %g5, [%g1]
stx %g5, [%g1+8]
membar #Sync
ldx [%g1], %l1
membar #Sync
another_second_load:
setx 0x2021000100, %l0, %g2
ldx [%g2], %i4
membar #Sync
another_load_to_mem:
ldx [%g1], %l1
membar #Sync
ESR:
setx L2ES_PA0,%l3, %l4
ldx [%l4], %l5
setx 0x2020000020, %l0, %g3
setx 0x2020000030, %l0, %g4
! setx 0x2020000000, %l0, %g5
stx %g5, [%g2]
membar #Sync
stx %g5, [%g3]
membar #Sync
stx %g5, [%g4]
membar #Sync
! stx %g5, [%g5]
ldsw:
membar #Sync
ldx [%g1], %i2
membar #Sync
ldx [%g2], %i4
membar #Sync
ldx [%g3], %i5
membar #Sync
ldx [%g4], %i6
membar #Sync
ldx [%g1], %l1
membar #Sync
ldx [%g1], %i2
membar #Sync
ldx [%g2], %i4
membar #Sync
ldx [%g3], %i5
membar #Sync
ldx [%g4], %i6
membar #Sync
ldx [%g1], %l1
membar #Sync
ldx [%g1], %i2
membar #Sync
ldx [%g2], %i4
membar #Sync
ldx [%g3], %i5
membar #Sync
ldx [%g4], %i6
membar #Sync
another_ESR:
setx L2ES_PA0,%l3, %l4
ldx [%l4], %l5
ba test_pass
/*******************************************************
* Exit code
*******************************************************/
test_pass:
ta T_GOOD_TRAP
test_fail:
ta T_BAD_TRAP