verif/diag/assembly/tsotool/prop/piu/fc4.prop

!-----------------------------------------------------------------------
! Run 32 threads on four cores with DMA on thread 5.
!-----------------------------------------------------------------------
TSOTOOL.PROCESSOR niagara2.rtl
TSOTOOL.MODE GEN
TSOTOOL.N_THREADS 32
TSOTOOL.TEST_NAME fc4_prop_diag
TSOTOOL.BATCH Y
!
!  It appears that DMA generating threads are about 18% efficient.
!  In other words, if all threads try to execute the same number
!  of 'instructions' the non-DMA threads will finish long before
!  the DMA threads. The sollowing weighting seems to work for an
!  FC1 model with one thread doing DMA.
!
!                     0  0    1    2    3    4    5    6    7  1   0    1    2    3    4    5    6    7 2   0    1    2    3    4    5    6    7  3   0    1    2    3    4    5    6    7
GEN.N_INSTR_PER_THREAD 100, 100, 100, 100, 100,  19, 100, 100,   100, 100, 100, 100, 100, 100, 100, 100,  100, 100, 100, 100, 100, 100, 100, 100,   100, 100, 100, 100, 100, 100, 100, 100
GEN.AVG_LOOP_SIZE 0
GEN.AVG_LOOP_ITER 0
! GEN.SEED 499406026
ADMAP.RTL.REGION_PA_SEPARATION 8M
ADMAP.N_REGIONS 4
ADMAP.REGION_SIZE 64K
ADMAP.REGION_OFFSETS 916-920-984-1012, 180-1416-2228-3228, 316-692-1268-1520-1560-2404, 2108-2132-2156-2304-2412-2544-2556
ADMAP.ATTRIBUTES CV=1110,CP=1110
ADMAP.NC_MEMMAP 0xc800002000:8G
ADMAP.N_ALIASES 0
ADMAP.ALIAS_FREQUENCY 64
ADMAP.ALIAS_OFFSET 8388608
RUN.SIMULATOR no_simulator_defined
WT.PCT_FP_INSTR 10
WT.PCT_LITTLE_ENDIAN 5
WT.PCT_LOADS_NF 0
WT.PCT_NFS_FAULT 0
WT.PCT_PREFETCH_FAULT 20
WT.PCT_PREFETCH_UNIMP 20
WT.PCT_CBRANCH 0
WT.PCT_SECONDARY_CTX 0
WT.PCT_NUCLEUS_CTX 0
WT.REPLACEMENT 5 0 cpu=5
WT.INTERRUPT 0
WT.LD 10 0 cpu=5
WT.BLD 0 5 cpu=0-4,6-31 region=0-2
WT.DWLD 0 1 cpu=0-4,6-31 region=0-2
WT.LDD 0
WT.QWLD 0
WT.AQLD 0 1 cpu=0-4,6-31 region=1
WT.ST 5 0 cpu=5
WT.BST 0 10 cpu=0-4,6-31 region=0-2
WT.BSTC 0
WT.ST_BINIT 0
WT.DWST_BINIT 0
WT.DWST 0 10 cpu=0-4,6-31 region=0-2
WT.QWST 0
WT.SWAP 0 5 cpu=0-4,6-31 region=0-2
WT.CAS 0 5 cpu=0-4,6-31 region=0-2
WT.CASX 0 5 cpu=0-4,6-31 region=0-2
WT.ASI_L2_FLUSH 0
WT.FLUSHI 0
WT.MEMBAR 0
WT.PREFETCH 10 0 cpu=5
WT.NOP 0
ADV.L2_WAYS 16
ADV.RESULTS_TO_MEM N
ADV.BST_MEMBARS Y
ADV.BLD_MEMBARS Y
ADV.FP_FLUSH_MEMBARS Y
ADV.CAS_IMPLICIT_MEMBARS Y
ADV.WARMUP_ITERATIONS 0
ADV.TEST_REPETITIONS 1

! PEP based DMA operation weights
! The weights here try to skew for mostly small
! and large DMAs, with the emphasis on large and
! skewed towards writes.

WT.MACRO.ALM_DMA0_RD 0 10 cpu=5 region=0-2
WT.MACRO.ALM_DMA1_RD 0 10 cpu=5 region=0-2
WT.MACRO.ALM_DMA2_RD 0 10 cpu=5 region=0-2
WT.MACRO.ALM_DMA3_RD 0 10 cpu=5 region=0-2
WT.MACRO.DMA0_RD_0x8 0 15 cpu=5 region=0-2
WT.MACRO.DMA0_RD_0xC 0 4 cpu=5 region=0-2
WT.MACRO.DMA0_RD_0x10 0 4 cpu=5 region=0-2
WT.MACRO.DMA0_RD_0x14 0 4 cpu=5 region=0-2
WT.MACRO.DMA0_RD_0x20 0 4 cpu=5 region=0-2
WT.MACRO.DMA0_RD_0x30 0 4 cpu=5 region=0-2
WT.MACRO.DMA0_RD_0x3C 0 30 cpu=5 region=0-2
WT.MACRO.DMA0_RD_0x40 0 10 cpu=5 region=0-2
WT.MACRO.DMA1_RD_0x40 0 10 cpu=5 region=0-2
WT.MACRO.DMA2_RD_0x40 0 10 cpu=5 region=0-2
WT.MACRO.DMA3_RD_0x40 0 10 cpu=5 region=0-2

WT.MACRO.ALM_DMA0_WR 0 10 cpu=5 region=0-2
WT.MACRO.ALM_DMA1_WR 0 10 cpu=5 region=0-2
WT.MACRO.ALM_DMA2_WR 0 10 cpu=5 region=0-2
WT.MACRO.ALM_DMA3_WR 0 10 cpu=5 region=0-2
WT.MACRO.DMA0_WR_0x8 0 30 cpu=5 region=0-2
WT.MACRO.DMA0_WR_0xC 0 10 cpu=5 region=0-2
WT.MACRO.DMA0_WR_0x10 0 10 cpu=5 region=0-2
WT.MACRO.DMA0_WR_0x14 0 10 cpu=5 region=0-2
WT.MACRO.DMA0_WR_0x20 0 10 cpu=5 region=0-2
WT.MACRO.DMA0_WR_0x30 0 10 cpu=5 region=0-2
WT.MACRO.DMA0_WR_0x3C 0 80 cpu=5 region=0-2
WT.MACRO.DMA0_WR_0x40 0  25 cpu=5 region=0-2
WT.MACRO.DMA1_WR_0x40 0  25 cpu=5 region=0-2
WT.MACRO.DMA2_WR_0x40 0  25 cpu=5 region=0-2
WT.MACRO.DMA3_WR_0x40 0  25 cpu=5 region=0-2

WT.MACRO.ALM_DMA0_INT 0 40 cpu=5 region=0-2