verif/diag/diaglists/cov/FcNiuPIO_1C_8T.s

/*
* ========== Copyright Header Begin ==========================================
*
* OpenSPARC T2 Processor File: FcNiuPIO_1C_8T.s
* Copyright (C) 1995-2007 Sun Microsystems, Inc. All Rights Reserved
* 4150 Network Circle, Santa Clara, California 95054, U.S.A.
*
* DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
*
* For the avoidance of doubt, and except that if any non-GPL license
* choice is available it will apply instead, Sun elects to use only
* the General Public License version 2 (GPLv2) at this time for any
* software where a choice of GPL license versions is made
* available with the language indicating that GPLv2 or any later version
* may be used, or where a choice of which version of the GPL is applied is
* otherwise unspecified.
*
* Please contact Sun Microsystems, Inc., 4150 Network Circle, Santa Clara,
* CA 95054 USA or visit www.sun.com if you need additional information or
* have any questions.
*
*
* ========== Copyright Header End ============================================
*/
#define MAIN_PAGE_HV_ALSO
#define RCRSTAT_A_Addr              mpeval(DMC_ADDRESS_RANGE+0x00050)
#define H_HT0_Data_access_error_0x32
#define SUN_H_HT0_Data_access_error_0x32 \
        inc     %l4; \
        done;
# 20 "diag.j.pp"
#include "hboot.s"
#include "niu_defines.h"
.text
.global main
main:
        ta T_CHANGE_HPRIV
        nop
! branch to main by comparing thread id.

        ta      T_RD_THID

        mov     0x1, %g2
        cmp     %g2, %o1
        be      THREAD_01
        nop

        mov     0x2, %g2
        cmp     %g2, %o1
        be      THREAD_02
        nop

        mov     0x3, %g2
        cmp     %g2, %o1
        be      THREAD_03
        nop

        mov     0x4, %g2
        cmp     %g2, %o1
        be      THREAD_04
        nop

        mov     0x5, %g2
        cmp     %g2, %o1
        be      THREAD_05
        nop

        mov     0x6, %g2
        cmp     %g2, %o1
        be      THREAD_06
        nop

        mov     0x7, %g2
        cmp     %g2, %o1
        be      THREAD_07
        nop

        brz     %o1, THREAD_00
        and     %o1, %g3, %g1
        nop

!
! Thread 0 Start
!
!
THREAD_00:

        setx    fflp_config_addr, %g1, %g2
        setx    ipp_config0_addr, %g1, %g3
        add     %g3, 0x160, %g5
        setx    0xaa, %g1, %o3
        ldxa    [%g2]ASI_PRIMARY_LITTLE, %o2
        stxa    %o3, [%g3]ASI_PRIMARY_LITTLE
        nop
        setx    loop_count, %g1, %g4
delay_loop_0:
        ldxa     [%g2]ASI_PRIMARY_LITTLE, %g1
        ldxa     [%g5]ASI_PRIMARY_LITTLE, %g6
        ldxa     [%g3]ASI_PRIMARY_LITTLE, %g1
        dec     %g4
        brnz    %g4, delay_loop_0
        nop

test_passed_00:
        nop
        EXIT_GOOD


THREAD_01:

        nop

        setx    fflp_config_addr, %g1, %g2
        setx    ipp_config0_addr, %g1, %g3
        add     %g3, 0x160, %g5
        setx    0x55, %g1, %o2
        ldxa    [%g3]ASI_PRIMARY_LITTLE, %o3

        stxa    %o2, [%g2]ASI_PRIMARY_LITTLE
        setx    loop_count, %g1, %g4
delay_loop_1:
        ldxa     [%g2]ASI_PRIMARY_LITTLE, %g1
        ldxa     [%g5]ASI_PRIMARY_LITTLE, %g6
        ldxa     [%g3]ASI_PRIMARY_LITTLE, %g1
        nop
        nop
        dec     %g4
        brnz    %g4, delay_loop_1
        nop

test_passed_01:
        nop
        EXIT_GOOD
# 163 "diag.j.pp"

THREAD_02:

        nop

        setx    fflp_config_addr, %g1, %g2
        setx    ipp_config0_addr, %g1, %g3
        add     %g3, 0x160, %g5
        setx    0x55, %g1, %o2
        ldxa    [%g3]ASI_PRIMARY_LITTLE, %o3

        stxa    %o2, [%g2]ASI_PRIMARY_LITTLE
        setx    loop_count, %g1, %g4
delay_loop_2:
        ldxa     [%g2]ASI_PRIMARY_LITTLE, %g1
        ldxa     [%g5]ASI_PRIMARY_LITTLE, %g6
        ldxa     [%g3]ASI_PRIMARY_LITTLE, %g1
        dec     %g4
        brnz    %g4, delay_loop_2
        nop

test_passed_02:
        nop
        EXIT_GOOD
# 198 "diag.j.pp"

THREAD_03:

        nop

        setx    fflp_config_addr, %g1, %g2
        setx    ipp_config0_addr, %g1, %g3
        add     %g3, 0x160, %g5
        setx    0x55, %g1, %o2
        ldxa    [%g3]ASI_PRIMARY_LITTLE, %o3

        stxa    %o2, [%g2]ASI_PRIMARY_LITTLE
        setx    loop_count, %g1, %g4
delay_loop_3:
        ldxa     [%g2]ASI_PRIMARY_LITTLE, %g1
        ldxa     [%g5]ASI_PRIMARY_LITTLE, %g6
        ldxa     [%g3]ASI_PRIMARY_LITTLE, %g1
        dec     %g4
        brnz    %g4, delay_loop_3
        nop

test_passed_03:
        nop
        EXIT_GOOD
# 233 "diag.j.pp"

THREAD_04:

        nop

        setx    fflp_config_addr, %g1, %g2
        setx    ipp_config0_addr, %g1, %g3
        add     %g3, 0x160, %g5
        setx    0x55, %g1, %o2
        ldxa    [%g3]ASI_PRIMARY_LITTLE, %o3

        stxa    %o2, [%g2]ASI_PRIMARY_LITTLE
        setx    loop_count, %g1, %g4
delay_loop_4:
        ldxa     [%g2]ASI_PRIMARY_LITTLE, %g1
        ldxa     [%g5]ASI_PRIMARY_LITTLE, %g6
        ldxa     [%g3]ASI_PRIMARY_LITTLE, %g1
        dec     %g4
        brnz    %g4, delay_loop_4
        nop

test_passed_04:
        nop
        EXIT_GOOD
# 268 "diag.j.pp"

THREAD_05:

        nop

        setx    fflp_config_addr, %g1, %g2
        setx    ipp_config0_addr, %g1, %g3
        add     %g3, 0x160, %g5
        setx    0x55, %g1, %o2
        ldxa    [%g3]ASI_PRIMARY_LITTLE, %o3

        stxa    %o2, [%g2]ASI_PRIMARY_LITTLE
        setx    loop_count, %g1, %g4
delay_loop_5:
        ldxa     [%g2]ASI_PRIMARY_LITTLE, %g1
        ldxa     [%g5]ASI_PRIMARY_LITTLE, %g6
        ldxa     [%g3]ASI_PRIMARY_LITTLE, %g1
        dec     %g4
        brnz    %g4, delay_loop_5
        nop

test_passed_05:
        nop
        EXIT_GOOD
# 302 "diag.j.pp"

THREAD_06:

        nop

        setx    fflp_config_addr, %g1, %g2
        setx    ipp_config0_addr, %g1, %g3
        add     %g3, 0x160, %g5
        setx    0x55, %g1, %o2
        ldxa    [%g3]ASI_PRIMARY_LITTLE, %o3

        stxa    %o2, [%g2]ASI_PRIMARY_LITTLE
        setx    loop_count, %g1, %g4
delay_loop_6:
        ldxa     [%g2]ASI_PRIMARY_LITTLE, %g1
        ldxa     [%g5]ASI_PRIMARY_LITTLE, %g6
        ldxa     [%g3]ASI_PRIMARY_LITTLE, %g1
        dec     %g4
        brnz    %g4, delay_loop_6
        nop

test_passed_06:
        nop
        EXIT_GOOD
# 336 "diag.j.pp"

THREAD_07:

        nop

        setx    fflp_config_addr, %g1, %g2
        setx    ipp_config0_addr, %g1, %g3
        add     %g3, 0x160, %g5
        setx    0x55, %g1, %o2
        ldxa    [%g3]ASI_PRIMARY_LITTLE, %o3

        stxa    %o2, [%g2]ASI_PRIMARY_LITTLE
        setx    loop_count, %g1, %g4
delay_loop_7:
        ldxa     [%g2]ASI_PRIMARY_LITTLE, %g1
        ldxa     [%g5]ASI_PRIMARY_LITTLE, %g6
        ldxa     [%g3]ASI_PRIMARY_LITTLE, %g1
        dec     %g4
        brnz    %g4, delay_loop_7
        nop

test_passed_07:
        nop
        EXIT_GOOD
# 373 "diag.j.pp"

#if 0
#endif