Initial commit of OpenSPARC T2 design and verification files.
[OpenSPARC-T2-DV] / verif / diag / assembly / niu / niu_tx_gen_boot.s
/*
* ========== Copyright Header Begin ==========================================
*
* OpenSPARC T2 Processor File: niu_tx_gen_boot.s
* Copyright (C) 1995-2007 Sun Microsystems, Inc. All Rights Reserved
* 4150 Network Circle, Santa Clara, California 95054, U.S.A.
*
* DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
* For the avoidance of doubt, and except that if any non-GPL license
* choice is available it will apply instead, Sun elects to use only
* the General Public License version 2 (GPLv2) at this time for any
* software where a choice of GPL license versions is made
* available with the language indicating that GPLv2 or any later version
* may be used, or where a choice of which version of the GPL is applied is
* otherwise unspecified.
*
* Please contact Sun Microsystems, Inc., 4150 Network Circle, Santa Clara,
* CA 95054 USA or visit www.sun.com if you need additional information or
* have any questions.
*
*
* ========== Copyright Header End ============================================
*/
#define MAIN_PAGE_NUCLEUS_ALSO
#define MAIN_PAGE_HV_ALSO
#include "boot.s"
#include "niu_defines.h"
/************************************************************************
Test case code start
************************************************************************/
.text
.global main
main:
#include "niu_init.h"
!
! Thread 0 Start
!
!
thread_0:
Init_flow:
nop ! $EV trig_pc_d(1, @VA(.MAIN.Init_flow)) -> pktGenConfig()
nop
Gen_Packet:
nop ! $EV trig_pc_d(1, @VA(.MAIN.Gen_Packet)) -> pktgen(0,8)
tx_begin:
setTxRingConfig:
setx TX_RNG_CFIG, %g1, %g2 ! $EV trig_pc_d(1, @VA(.MAIN.setTxRingConfig)) -> printf("Triggering setTxRingConfig",*,1)
setx TxRingConfig_data, %g1, %g3
stx %g3, [%g2]
nop
setTxRingKick:
setx TX_RING_KICK, %g1, %g2
setx Tx_Ring_Kick_data, %g1, %g3
stx %g3, [%g2]
nop
setTxCs:
setx TX_CS, %g1, %g2
setx SetTxCs_data, %g1, %g3
stx %g3, [%g2]
nop
nop
nop
stx %g0, [%g2] ! Unstall the dma Engine
nop
setx loop_count, %g1, %g4
delay_loop:
ldx [%g2], %g5
nop
nop
nop
nop
dec %g4
brnz %g4, delay_loop
nop
test_passed:
EXIT_GOOD
test_failed:
EXIT_BAD
/************************************************************************
Test case data start
************************************************************************/
SECTION descriptor data_va=0x100000000
attr_data {
Name = descriptor,
hypervisor,
compressimage
}
.data
.align 0x10000
descriptor:
.xword 0x0060452301000484
.xword 0x0064452301000484
.xword 0x0068452301000484
.xword 0x006c452301000484
.xword 0x0070452301000484
.xword 0x0074452301000484
.xword 0x0078452301000484
.xword 0x007c452301000484
/************************************************************************/
SECTION pkt0_data data_va=0x123456000
attr_data {
Name = pkt0_data,
hypervisor,
compressimage,
notsb
}
.data
pkt0_data:
/************************************************************************/
SECTION pkt1_data data_va=0x123456100
attr_data {
Name = pkt1_data,
hypervisor,
compressimage,
notsb
}
.data
pkt1_data:
/************************************************************************/
SECTION pkt2_data data_va=0x123456200
attr_data {
Name = pkt2_data,
hypervisor,
compressimage,
notsb
}
.data
pkt2_data:
/************************************************************************/
SECTION pkt3_data data_va=0x123456300
attr_data {
Name = pkt3_data,
hypervisor,
compressimage,
notsb
}
.data
pkt3_data:
/************************************************************************/
SECTION pkt4_data data_va=0x123456400
attr_data {
Name = pkt4_data,
hypervisor,
compressimage,
notsb
}
.data
pkt4_data:
/************************************************************************/
SECTION pkt5_data data_va=0x123456500
attr_data {
Name = pkt5_data,
hypervisor,
compressimage,
notsb
}
.data
pkt5_data:
/************************************************************************/
SECTION pkt6_data data_va=0x123456600
attr_data {
Name = pkt6_data,
hypervisor,
compressimage,
notsb
}
.data
pkt6_data:
/************************************************************************/
SECTION pkt7_data data_va=0x123456700
attr_data {
Name = pkt7_data,
hypervisor,
compressimage,
notsb
}
.data
pkt7_data: