Commit | Line | Data |
---|---|---|
920dae64 AT |
1 | <!-- interpreter=xml2reg args='-t' --> |
2 | <register_list> | |
3 | <register name="L2_DIAG_DATA_ADDRESSING_FIELDS (L2_DIAG_DATA_ADDRESSING_FIELDS)"> | |
4 | <class_name>N2_L2DiagDataAddressingFields</class_name> | |
5 | <submodule>N2</submodule> | |
6 | <comment> | |
7 | This class is based on N2 PRM 1.1 Table 28-43 and splits a virtual | |
8 | address into the bit fields needed to access the L2 diagnostic data | |
9 | address space. | |
10 | </comment> | |
11 | <priv>yes</priv> | |
12 | <field name="RSVD2"> | |
13 | <start_offset>0</start_offset> | |
14 | <end_offset>2</end_offset> | |
15 | <initial_value>0</initial_value> | |
16 | <protection>RO</protection> | |
17 | <field_type>ZERO</field_type> | |
18 | <comment> | |
19 | All zero for 64-bit access. | |
20 | </comment> | |
21 | <format type="hex"/> | |
22 | </field> | |
23 | <field name="WORD"> | |
24 | <start_offset>3</start_offset> | |
25 | <end_offset>5</end_offset> | |
26 | <initial_value>0</initial_value> | |
27 | <protection>RW</protection> | |
28 | <field_type>NORMAL</field_type> | |
29 | <comment> | |
30 | Selects 64-bit word in 64-byte cache line. | |
31 | </comment> | |
32 | <format type="hex"/> | |
33 | </field> | |
34 | <field name="BANK"> | |
35 | <start_offset>6</start_offset> | |
36 | <end_offset>8</end_offset> | |
37 | <initial_value>0</initial_value> | |
38 | <protection>RW</protection> | |
39 | <field_type>NORMAL</field_type> | |
40 | <comment> | |
41 | Selects bank containing the cache line. | |
42 | </comment> | |
43 | <format type="hex"/> | |
44 | </field> | |
45 | <field name="SET"> | |
46 | <start_offset>9</start_offset> | |
47 | <end_offset>17</end_offset> | |
48 | <initial_value>0</initial_value> | |
49 | <protection>RW</protection> | |
50 | <field_type>NORMAL</field_type> | |
51 | <comment> | |
52 | Selects cache set containing the cache line. Assumes L2 cache | |
53 | hashing is disabled. | |
54 | </comment> | |
55 | </field> | |
56 | <field name="WAY"> | |
57 | <start_offset>18</start_offset> | |
58 | <end_offset>21</end_offset> | |
59 | <initial_value>0</initial_value> | |
60 | <protection>RW</protection> | |
61 | <field_type>NORMAL</field_type> | |
62 | <comment> | |
63 | Selects way in cache set. | |
64 | </comment> | |
65 | </field> | |
66 | <field name="ODDEVEN"> | |
67 | <start_offset>22</start_offset> | |
68 | <end_offset>22</end_offset> | |
69 | <initial_value>0</initial_value> | |
70 | <protection>RW</protection> | |
71 | <field_type>NORMAL</field_type> | |
72 | <comment> | |
73 | Selects 32-bit word for 64-bit word selected by WORD field. | |
74 | </comment> | |
75 | </field> | |
76 | <field name="RSVD1"> | |
77 | <start_offset>23</start_offset> | |
78 | <end_offset>31</end_offset> | |
79 | <initial_value>0</initial_value> | |
80 | <protection>RO</protection> | |
81 | <field_type>ZERO</field_type> | |
82 | <comment> | |
83 | Reserved, can be any value in PRM. In Riesling, we limit to 0. | |
84 | </comment> | |
85 | </field> | |
86 | <field name="SELECT"> | |
87 | <start_offset>32</start_offset> | |
88 | <end_offset>39</end_offset> | |
89 | <initial_value>0xA0</initial_value> | |
90 | <protection>RO</protection> | |
91 | <field_type>NORMAL</field_type> | |
92 | <comment> | |
93 | Must be 0xA0, 0xA1, 0xB0, or 0xB1 to select L2 diagnostic data access. | |
94 | </comment> | |
95 | </field> | |
96 | <field name="RSVD0"> | |
97 | <start_offset>40</start_offset> | |
98 | <end_offset>63</end_offset> | |
99 | <initial_value>0</initial_value> | |
100 | <protection>RO</protection> | |
101 | <field_type>ZERO</field_type> | |
102 | <comment> | |
103 | Reserved in PRM. In Riesling, we limit to 0. | |
104 | </comment> | |
105 | </field> | |
106 | </register> | |
107 | </register_list> |