etc/etc.i386/MAKEDEV

#!/bin/sh -
#
# Copyright (c) 1990 The Regents of the University of California.
# All rights reserved.
#
# Written and contributed by W. Jolitz 12/90
#
# Redistribution and use in source and binary forms are permitted provided
# that: (1) source distributions retain this entire copyright notice and
# comment, and (2) distributions including binaries display the following
# acknowledgement:  ``This product includes software developed by the
# University of California, Berkeley and its contributors'' in the
# documentation or other materials provided with the distribution and in
# all advertising materials mentioning features or use of this software.
# Neither the name of the University nor the names of its contributors may
# be used to endorse or promote products derived from this software without
# specific prior written permission.
# THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED
# WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF
# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
#
#       @(#)MAKEDEV     5.2 (Berkeley) 6/22/90
#
# Device "make" file.  Valid arguments:
#       all     makes all known devices, standard number of units (or close)
#       std     standard devices
#       local   configuration specific devices
#
# Tapes:
#       wt*     QIC-interfaced (e.g. not SCSI) 3M cartridge tape
#       st*     "NEW type scsi tapes" (old driver uses the
#               block devices of the disks to get access)
#
# Disks:
#       wd*     "winchester" disk drives (ST506,IDE,ESDI,RLL,...)
#       fd*     "floppy" disk drives (3 1/2", 5 1/4")
#       sd*     "scsi disks"
#       cd*     "cdrom disks"
#
# Console ports:
#       pc*     devices for stock pccons
#       vty*    virtual console devices for syscons/pcvt/codrv
#
# Pointing devices:
#       mse*    Logitech and ATI Inport bus mouse
#       psm*    PS/2 mouse
#
# Terminal ports:
#       sio*    fast interrupt PC COM ports (really makes tty* entries for sio)
#       tty*    alias for sio ports, this is what the system really wants
#       com*    standard PC COM ports (really makes tty* entries for com)
#               Note that the `com' driver is not configured in the
#               supplied kernels and is usually not what you want.  In
#               a future release it may be completely desupported.  Fair
#               warning.
#
# Pseudo terminals:
#       pty*    set of 16 master and slave pseudo terminals
#       vty*    virtual terminals using syscons/pcvt/codrv console
#
# Printers:
#       lpt*    stock lp
#       lpa*    interruptless lp
#
# Call units:
#
# Special purpose devices:
#       bpf*    packet filter
#       dcf*    dcf clock
#       speaker pc speaker
#       tw*     xten power controller
#       snd*    various sound cards
#
#       $Id: MAKEDEV,v 1.23 1994/01/24 20:57:16 davidg Exp $
#

PATH=/sbin:/bin/:/usr/bin:/usr/sbin:
umask 77
for i
do
case $i in

all)
        sh MAKEDEV std                                          # standard
        sh MAKEDEV wd0 wd1 fd0 fd1 wt0 sd0 sd1 st0 cd0          # bdev
        sh MAKEDEV pty0 tty0 tty1 tty2 tty3 pc0 lpt0 lpt1 lpt2  # cdev
        sh MAKEDEV ch0 tw0 bpf0 dcf0 lpa0 lpa1 lpa2             # cdev
        sh MAKEDEV speaker mse0 sio0 sio1 sio2 sio3             # cdev
        # NOTE: co0 and vty04 are not done by a "sh MAKEDEV all"
        # these are for codrv and interfere with other devices! - rgrimes
        ;;
std)
        rm -f console drum mem kmem null zero io tty klog stdin stdout stderr
        mknod console   c 0 0;  chmod 600 console;      chown root.wheel console
        mknod drum      c 4 0;  chmod 640 drum;         chown root.kmem drum
        mknod kmem      c 2 1;  chmod 640 kmem;         chown root.kmem kmem
        mknod mem       c 2 0;  chmod 640 mem;          chown root.kmem mem
        mknod null      c 2 2;  chmod 666 null;         chown root.wheel null
        mknod zero      c 2 12; chmod 666 zero;         chown root.wheel zero
        mknod io        c 2 14; chmod 640 io;           chown root.kmem io
        mknod tty       c 1 0;  chmod 666 tty;          chown root.wheel tty
        mknod klog      c 7 0;  chmod 600 klog;         chown root.wheel klog
        mknod stdin     c 22 0; chmod 666 stdin;        chown root.wheel stdin
        mknod stdout    c 22 1; chmod 666 stdout;       chown root.wheel stdout
        mknod stderr    c 22 2; chmod 666 stderr;       chown root.wheel stderr
        rm -f fd/*
        mkdir fd > /dev/null 2>&1
        (cd fd && eval `echo "" | awk ' BEGIN { \
                for (i = 0; i < 64; i++) \
                        printf("mknod %d c 22 %d;", i, i)}'`)
        chown -R bin.bin fd
        chmod 555 fd
        chmod 666 fd/*
        ;;


# Create device files for new Archive/Wangtek QIC-02 tape driver (vak)
wt*)
        umask 2 ; u=`expr $i : '..\(.*\)'`
        if [ x$u = x ]; then u=0; fi
        rm -f r[Ww]t$u nr[Ww]t$u r[Ww]t$u[a-f] nr[Ww]t$u[a-f]
        mknod rwt${u}   c 10 `expr  0 + $u`     # default density, 512b blocks
        mknod nrwt${u}  c 10 `expr  4 + $u`
#       mknod rWt${u}   c 10 `expr 64 + $u`     # default density, 1024b blocks
#       mknod nrWt${u}  c 10 `expr 68 + $u`
        mknod rwt${u}b  c 10 `expr 16 + $u`     # 60 megabytes
        mknod nrwt${u}b c 10 `expr 20 + $u`
        mknod rwt${u}c  c 10 `expr 24 + $u`     # 120 megabytes
        mknod nrwt${u}c c 10 `expr 28 + $u`
        mknod rwt${u}d  c 10 `expr 32 + $u`     # 150 megabytes
        mknod nrwt${u}d c 10 `expr 36 + $u`
#       mknod rwt${u}e  c 10 `expr 40 + $u`     # 300 megabytes?
#       mknod nrwt${u}e c 10 `expr 44 + $u`
#       mknod rwt${u}f  c 10 `expr 48 + $u`     # 600 megabytes?
#       mknod nrwt${u}f c 10 `expr 52 + $u`
        chown root.operator r[Ww]t$u nr[Ww]t$u r[Ww]t$u[a-f] nr[Ww]t$u[a-f]
        umask 77
        ;;

fd*)
        umask 2 ; unit=`expr $i : '..\(.*\)'`
        name=fd; blk=2; chr=9;
        rm -f $name$unit* r$name$unit*
        case $unit in
        0|1|2|3)
                mknod ${name}${unit}   b $blk `expr $unit '*' 64`
                mknod r${name}${unit}  c $chr `expr $unit '*' 64`
                # Fake BSD partitions
                for i in a b c d e f g h
                do
                        ln ${name}${unit} ${name}${unit}$i
                        ln r${name}${unit} r${name}${unit}$i
                done
                # User-readable and programmer-readable name sets

                mknod ${name}${unit}.1720  b $blk `expr $unit '*' 64 + 1`
                mknod r${name}${unit}.1720 c $chr `expr $unit '*' 64 + 1`
                # ln ${name}${unit}.1720 ${name}${unit}135hs21
                # ln r${name}${unit}.1720 r${name}${unit}135hs21

                mknod ${name}${unit}.1480  b $blk `expr $unit '*' 64 + 2`
                mknod r${name}${unit}.1480 c $chr `expr $unit '*' 64 + 2`
                # ln ${name}${unit}.1480 ${name}${unit}135hs18
                # ln r${name}${unit}.1480 r${name}${unit}135hs18
                # ln ${name}${unit}.1480 ${name}${unit}96hs18
                # ln r${name}${unit}.1480 r${name}${unit}96hs18

                mknod ${name}${unit}.1440  b $blk `expr $unit '*' 64 + 3`
                mknod r${name}${unit}.1440 c $chr `expr $unit '*' 64 + 3`
                # ln ${name}${unit}.1440 ${name}${unit}135
                # ln r${name}${unit}.1440 r${name}${unit}135
                # ln ${name}${unit}.1440 ${name}${unit}135ds18
                # ln r${name}${unit}.1440 r${name}${unit}135ds18
                # ln ${name}${unit}.1440 ${name}${unit}96ds18
                # ln r${name}${unit}.1440 r${name}${unit}96ds18

                mknod ${name}${unit}.1200  b $blk `expr $unit '*' 64 + 4`
                mknod r${name}${unit}.1200 c $chr `expr $unit '*' 64 + 4`
                # ln ${name}${unit}.1200 ${name}${unit}96
                # ln r${name}${unit}.1200 r${name}${unit}96
                # ln ${name}${unit}.1200 ${name}${unit}96ds15
                # ln r${name}${unit}.1200 r${name}${unit}96ds15
                # ln ${name}${unit}.1200 ${name}${unit}135ds15
                # ln r${name}${unit}.1200 r${name}${unit}135ds15

                mknod ${name}${unit}.820  b $blk `expr $unit '*' 64 + 5`
                mknod r${name}${unit}.820 c $chr `expr $unit '*' 64 + 5`
                # ln ${name}${unit}.820 ${name}${unit}96hs10
                # ln r${name}${unit}.820 r${name}${unit}96hs10
                # ln ${name}${unit}.820 ${name}${unit}135hs10
                # ln r${name}${unit}.820 r${name}${unit}135hs10

                mknod ${name}${unit}.800  b $blk `expr $unit '*' 64 + 6`
                mknod r${name}${unit}.800 c $chr `expr $unit '*' 64 + 6`
                # ln ${name}${unit}.800 ${name}${unit}96ds10
                # ln r${name}${unit}.800 r${name}${unit}96ds10
                # ln ${name}${unit}.800 ${name}${unit}135ds10
                # ln r${name}${unit}.800 r${name}${unit}135ds10

                mknod ${name}${unit}.720  b $blk `expr $unit '*' 64 + 7`
                mknod r${name}${unit}.720 c $chr `expr $unit '*' 64 + 7`
                # ln ${name}${unit}.720 ${name}${unit}96ds9
                # ln r${name}${unit}.720 r${name}${unit}96ds9
                # ln ${name}${unit}.720 ${name}${unit}135ds9
                # ln r${name}${unit}.720 r${name}${unit}135ds9

                mknod ${name}${unit}.360  b $blk `expr $unit '*' 64 + 8`
                mknod r${name}${unit}.360 c $chr `expr $unit '*' 64 + 8`
                # ln ${name}${unit}.360 ${name}${unit}48
                # ln r${name}${unit}.360 r${name}${unit}48
                # ln ${name}${unit}.360 ${name}${unit}48ds9
                # ln r${name}${unit}.360 r${name}${unit}48ds9

                chgrp operator ${name}${unit}* r${name}${unit}*
                chmod 640 ${name}${unit}* r${name}${unit}*
                ;;
        *)
                echo bad unit for disk in: $i
                ;;
        esac
        umask 77
        ;;

sd*|wd*)
        umask 2 ; unit=`expr $i : '..\(.*\)'`
        case $i in
        sd*) name=sd; blk=4; chr=13;;
        wd*) name=wd; blk=0; chr=3;;
        esac
        rm -f $name$unit? r$name$unit?
        case $unit in
        0|1|2|3|4|5|6)
                mknod ${name}${unit}a   b $blk `expr $unit '*' 8 + 0`
                mknod ${name}${unit}b   b $blk `expr $unit '*' 8 + 1`
                mknod ${name}${unit}c   b $blk `expr $unit '*' 8 + 2`
                mknod ${name}${unit}d   b $blk `expr $unit '*' 8 + 3`
                mknod ${name}${unit}e   b $blk `expr $unit '*' 8 + 4`
                mknod ${name}${unit}f   b $blk `expr $unit '*' 8 + 5`
                mknod ${name}${unit}g   b $blk `expr $unit '*' 8 + 6`
                mknod ${name}${unit}h   b $blk `expr $unit '*' 8 + 7`
                mknod r${name}${unit}a  c $chr `expr $unit '*' 8 + 0`
                mknod r${name}${unit}b  c $chr `expr $unit '*' 8 + 1`
                mknod r${name}${unit}c  c $chr `expr $unit '*' 8 + 2`
                mknod r${name}${unit}d  c $chr `expr $unit '*' 8 + 3`
                mknod r${name}${unit}e  c $chr `expr $unit '*' 8 + 4`
                mknod r${name}${unit}f  c $chr `expr $unit '*' 8 + 5`
                mknod r${name}${unit}g  c $chr `expr $unit '*' 8 + 6`
                mknod r${name}${unit}h  c $chr `expr $unit '*' 8 + 7`
                chgrp operator ${name}${unit}[a-h] r${name}${unit}[a-h]
                chmod 640 ${name}${unit}[a-h] r${name}${unit}[a-h]
                ;;
        *)
                echo bad unit for disk in: $i
                ;;
        esac
        umask 77
        ;;

uk*)
        unit=`expr $i : 'uk\(.*\)'`
        rm -f uk$unit
        mknod uk$unit c 27 $unit
        ;;

com*)
        unit=`expr $i : '...\(.*\)'`
        rm -f tty0$unit
        mknod tty0$unit c 8 $unit
        chown uucp.wheel tty0$unit
        ;;

pty*)
        class=`expr $i : 'pty\(.*\)'`
        case $class in
        0) offset=0 name=p;;
        1) offset=16 name=q;;
        2) offset=32 name=r;;
        3) offset=48 name=s;;
# Note that telnetd, rlogind, and xterm (at least) only look at p-s.
        4) offset=64 name=t;;
        *) echo bad unit for pty in: $i;;
        esac
        case $class in
        0|1|2|3|4)
                umask 0
                eval `echo $offset $name | awk ' { b=$1; n=$2 } END {
                        for (i = 0; i < 16; i++)
                                printf("rm -f tty%s%x; mknod tty%s%x c 5 %d; \
                                        rm -f pty%s%x; mknod pty%s%x c 6 %d; ", \
                                        n, i, n, i, b+i, n, i, n, i, b+i); }'`
                umask 77
                ;;
        esac
        ;;

st*)
        umask 2 ; unit=`expr $i : '..\(.*\)'`
        chr=14;

        #remove old stype names
        rm -f [hml]rst[0123456] [hml][en]rst[0123456] [hml]enrst[0123456]
        #remove new style names
        rm -f rst${unit} [en]rst${unit} enrst${unit}
        rm -f rst${unit}.[0123] nrst${unit}.[0123]\
                 erst${unit}.[0123] st${unit}ctl.[0123]

        case $unit in
        0|1|2|3|4|5|6)
                for mode in 0 1 2 3
                do
                        mknod rst${unit}.${mode} c $chr `expr $unit '*' 16 + $mode '*' 4 + 0`
                        mknod nrst${unit}.${mode} c $chr `expr $unit '*' 16 + $mode '*' 4 + 1`
                        mknod erst${unit}.${mode} c $chr `expr $unit '*' 16 + $mode '*' 4 + 2`
                        mknod st${unit}ctl.${mode} c $chr `expr $unit '*' 16 + $mode '*' 4 + 3`
                        chgrp operator  rst${unit}.${mode}\
                                        nrst${unit}.${mode} \
                                        erst${unit}.${mode} \
                                        st${unit}ctl.${mode}
                        chmod 644       rst${unit}.${mode}\
                                        nrst${unit}.${mode} \
                                        erst${unit}.${mode}
                        chmod 660       st${unit}ctl.${mode}
                done
                ln rst${unit}.0 rst${unit}
                ln nrst${unit}.0 nrst${unit}
                ln erst${unit}.0 erst${unit}
                ;;
        *)
                echo bad unit for tape in: $i
                ;;
        esac
        umask 77
        ;;

ch*)
        umask 2 ; unit=`expr $i : '..\(.*\)'`
        case $i in
        ch*) name=ch;  chr=17;;
        esac
        rm -f $name$unit
        case $unit in
        0|1|2|3|4|5|6)
                mknod ${name}${unit}    c $chr `expr $unit '*' 16 + 0`
                chgrp operator ${name}${unit}
                chmod 640 ${name}${unit}
                ;;
        *)
                echo bad unit for media changer in: $i
                ;;
        esac
        umask 77
        ;;

cd*)
        umask 2 ; unit=`expr $i : '..\(.*\)'`
        case $i in
        cd*) name=cd; blk=6; chr=15;;
        esac
        rm -f $name$unit? r$name$unit?
        case $unit in
        0|1|2|3|4|5|6)
                mknod ${name}${unit}a   b $blk `expr $unit '*' 8 + 0`
                mknod ${name}${unit}d   b $blk `expr $unit '*' 8 + 3`
                mknod r${name}${unit}a  c $chr `expr $unit '*' 8 + 0`
                mknod r${name}${unit}d  c $chr `expr $unit '*' 8 + 3`
                chgrp operator ${name}${unit}[a-h] r${name}${unit}[a-h]
                chmod 640 ${name}${unit}[a-h] r${name}${unit}[a-h]
                ;;
        *)
                echo bad unit for disk in: $i
                ;;
        esac
        umask 77
        ;;

lpt*)
        unit=`expr $i : 'lpt\(.*\)'`
        rm -f lpt$unit
        mknod lpt$unit c 16 $unit
        chown root.wheel lpt$unit
        ;;

tw*)
        unit=`expr $i : 'tw\(.*\)'`
        rm -f tw$unit
        mknod tw$unit c 19 $unit
        chown root.wheel tw$unit
        ;;

# hv 22-apr-93 use this to create the necessary video device for
# pccons driver
pc*)
        chr=12
        minor=0
        name=ttyv0
        rm -f ${name} vga kbd kbdco vgaco ttyv[0-9][0-9]
        mknod ${name} c ${chr} ${minor}
        chown root.wheel $name
        ln -s ${name} vga
        ;;

# Use this to create virtual consoles for syscons, pcvt or codrv
# /dev/ttyv0-b
# use as MAKEDEV vtyNN to create NN entries
vty*)
        chr=12
        units=`expr $i : 'vty\(.*\)'`
        umask 0
        eval `echo ${chr} ${units} | awk ' { c=$1; n=$2 } END {
                for (i = 0; i < n; i++)
                        printf("rm -f ttyv%01x; mknod ttyv%01x c %d %d;", \
                                i, i, c, i); }'`
        umask 77
        ;;

bpf*)
        unit=`expr $i : 'bpf\(.*\)'`
        rm -f bpf$unit
        mknod bpf$unit c 23 $unit
        chown root.wheel bpf$unit
        ;;

dcf*)
        unit=`expr $i : 'dcf\(.*\)'`
        rm -f dcf$unit
        mknod dcf$unit c 24 $unit
        chown root.wheel dcf$unit
        ;;

lpa*)
        unit=`expr $i : 'lpa\(.*\)'`
        chr=25
        rm -f lpa$unit lpa${unit}p
        mknod lpa${unit}        c $chr `expr $unit + 0`
        mknod lpa${unit}p       c $chr `expr $unit + 32`
        chown root.wheel lpa${unit} lpa${unit}p
        ;;

speaker)
        rm -f speaker
        mknod speaker c 26 0
        chown root.wheel speaker
        ;;

sio*|tty*|cua*)
        unit=`expr $i : '...\(.*\)'`
        rm -f tty0$unit cua0$unit
        mknod tty0$unit c 28 $unit
        mknod cua0$unit c 28 `expr $unit + 128`
        chown uucp.wheel tty0$unit cua0$unit
        ;;

mse*)
        unit=`expr $i : 'mse\(.*\)'`
        chr=27
        rm -f mse$unit
        mknod mse$unit c $chr `expr $unit '*' 2 + 1`    # non-blocking for X11
        chown root.wheel mse$unit
        ;;

psm*)
        unit=`expr $i : 'psm\(.*\)'`
        chr=21
        rm -f psm$unit
        mknod psm$unit c $chr `expr $unit '*' 2 + 1`    # non-blocking for X11
        chown root.wheel psm$unit
        ;;

mouse*)
        name=`expr $i : 'mouse-\(.*\)'`
        if [ ! -c $name ]; then
                $0 $name                        # make the appropriate device
        fi
        rm -f mouse
        ln -s $name mouse
        ;;


snd*)
        chr=30
        rm -f /dev/mixer        # Mixer [ Control ]
        mknod /dev/mixer        c $chr 0
        chmod 666 /dev/mixer

        rm -f /dev/sequencer    # Sequencer [ FM Synth and MIDI output ]
        mknod /dev/sequencer    c $chr 1
        chmod 666 /dev/sequencer

        rm -f /dev/midi         # Midi input [ Not implemented ]
        mknod /dev/midi         c $chr 2

        rm -f /dev/dsp          # DSP [ Digitized voice ]
        mknod /dev/dsp          c $chr 3
        chmod 666 /dev/dsp

        rm -f /dev/audio        # SPARC audio [ Not fully implemented ]
        mknod /dev/audio        c $chr 4
        chmod 666 /dev/audio

        rm -f /dev/dsp16        # DSP16 [ Same as /dev/dsp, except 16 bits ]
        mknod /dev/dsp16        c $chr 5
        chmod 666 /dev/dsp16

        rm -f /dev/sndstat      # Status Device [ Debugging interface ]
        mknod /dev/sndstat      c $chr 6
        chmod 666 /dev/sndstat

        rm -f /dev/pro_midi     # PRO_MIDI [PAS midi input and output]
        mknod /dev/pro_midi     c $chr 15
        chmod 666 /dev/pro_midi

        rm -f /dev/dsp1         # DSP 1 [ SB emulation of PAS16 or 2nd audio ]
        mknod /dev/dsp1         c $chr 19
        chmod 666 /dev/dsp1

        rm -f /dev/audio1       # Sparc Audio 1 [ SB emulation of PAS16 or 2nd audio ]
        mknod /dev/audio1       c $chr 20
        chmod 666 /dev/audio1
        ;;

local)
        umask 0
        sh MAKEDEV.local
        ;;

esac
done