delete unneeded include of dir.h
[unix-history] / usr / src / sys / kern / subr_prf.c
/*
* Copyright (c) 1982, 1986, 1988 Regents of the University of California.
* All rights reserved. The Berkeley software License Agreement
* specifies the terms and conditions for redistribution.
*
* @(#)subr_prf.c 7.14 (Berkeley) %G%
*/
#include "param.h"
#include "systm.h"
#include "seg.h"
#include "buf.h"
#include "conf.h"
#include "reboot.h"
#include "vm.h"
#include "msgbuf.h"
#include "user.h"
#include "proc.h"
#include "ioctl.h"
#include "tty.h"
#include "syslog.h"
#include "machine/mtpr.h"
#ifdef KADB
#include "machine/kdbparam.h"
#endif
#define TOCONS 0x1
#define TOTTY 0x2
#define TOLOG 0x4
/*
* In case console is off,
* panicstr contains argument to last
* call to panic.
*/
char *panicstr;
extern cnputc(); /* standard console putc */
extern struct tty cons; /* standard console tty */
struct tty *constty; /* pointer to console "window" tty */
int (*v_putc)() = cnputc; /* routine to putc on virtual console */
extern cnputc(); /* standard console putc */
extern struct tty cons; /* standard console tty */
struct tty *constty; /* pointer to console "window" tty */
int (*v_console)() = cnputc; /* routine to putc on virtual console */
/*
* Scaled down version of C Library printf.
* Used to print diagnostic information directly on console tty.
* Since it is not interrupt driven, all system activities are
* suspended. Printf should not be used for chit-chat.
*
* One additional format: %b is supported to decode error registers.
* Usage is:
* printf("reg=%b\n", regval, "<base><arg>*");
* Where <base> is the output base expressed as a control character,
* e.g. \10 gives octal; \20 gives hex. Each arg is a sequence of
* characters, the first of which gives the bit number to be inspected
* (origin 1), and the next characters (up to a control character, i.e.
* a character <= 32), give the name of the register. Thus
* printf("reg=%b\n", 3, "\10\2BITTWO\1BITONE\n");
* would produce output:
* reg=3<BITTWO,BITONE>
*
* Another additional format: %r is used to pass an additional format string
* and argument list recursively. Usage is typically:
*
* fn(otherstuff, fmt [, arg1, ... ] )
* char *fmt;
* u_int arg1, ...;
*
* printf("prefix: %r, other stuff\n", fmt, &arg1);
*/
#if defined(tahoe)
int consintr;
#endif
/*VARARGS1*/
printf(fmt, x1)
char *fmt;
unsigned x1;
{
#if defined(tahoe)
register int savintr;
savintr = consintr, consintr = 0; /* disable interrupts */
#endif
prf(fmt, &x1, TOCONS | TOLOG, (struct tty *)0);
logwakeup();
#if defined(tahoe)
consintr = savintr; /* reenable interrupts */
#endif
}
/*
* Uprintf prints to the current user's terminal.
* It may block if the tty queue is overfull.
* No message is printed if the queue does not clear
* in a reasonable time.
* Should determine whether current terminal user is related
* to this process.
*/
/*VARARGS1*/
uprintf(fmt, x1)
char *fmt;
unsigned x1;
{
#ifdef notdef
register struct proc *p;
#endif
register struct tty *tp;
if ((tp = u.u_ttyp) == NULL)
return;
#ifdef notdef
if (tp->t_pgrp && (p = pfind(tp->t_pgrp)))
if (p->p_uid != u.u_uid) /* doesn't account for setuid */
return;
#endif
if (ttycheckoutq(tp, 1))
prf(fmt, &x1, TOTTY, tp);
}
/*
* tprintf prints on the specified terminal (console if none)
* and logs the message. It is designed for error messages from
* single-open devices, and may be called from interrupt level
* (does not sleep).
*/
/*VARARGS2*/
tprintf(tp, fmt, x1)
register struct tty *tp;
char *fmt;
unsigned x1;
{
int flags = TOTTY | TOLOG;
logpri(LOG_INFO);
if (tp == (struct tty *)NULL) {
tp = constty;
if (tp == (struct tty *)NULL)
tp = &cons;
}
if (ttycheckoutq(tp, 0) == 0)
flags = TOLOG;
prf(fmt, &x1, flags, tp);
logwakeup();
}
/*
* Log writes to the log buffer,
* and guarantees not to sleep (so can be called by interrupt routines).
* If there is no process reading the log yet, it writes to the console also.
*/
/*VARARGS2*/
log(level, fmt, x1)
char *fmt;
unsigned x1;
{
register s = splhigh();
extern int log_open;
logpri(level);
prf(fmt, &x1, TOLOG, (struct tty *)0);
splx(s);
if (!log_open)
prf(fmt, &x1, TOCONS, (struct tty *)0);
logwakeup();
}
logpri(level)
int level;
{
putchar('<', TOLOG, (struct tty *)0);
printn((u_long)level, 10, TOLOG, (struct tty *)0);
putchar('>', TOLOG, (struct tty *)0);
}
/*VARARGS1*/
addlog(fmt, x1)
char *fmt;
unsigned x1;
{
register s = splhigh();
prf(fmt, &x1, TOLOG, (struct tty *)0);
splx(s);
if (!log_open)
prf(fmt, &x1, TOCONS, (struct tty *)0);
logwakeup();
}
prf(fmt, adx, flags, ttyp)
register char *fmt;
register u_int *adx;
struct tty *ttyp;
{
register int b, c, i;
char *s;
int any;
loop:
while ((c = *fmt++) != '%') {
if (c == '\0')
return;
putchar(c, flags, ttyp);
}
again:
c = *fmt++;
/* THIS CODE IS MACHINE DEPENDENT IN HANDLING %l? AND %c */
switch (c) {
case 'l':
goto again;
case 'x': case 'X':
b = 16;
goto number;
case 'd': case 'D':
b = -10;
goto number;
case 'u':
b = 10;
goto number;
case 'o': case 'O':
b = 8;
number:
printn((u_long)*adx, b, flags, ttyp);
break;
case 'c':
b = *adx;
#if BYTE_ORDER == LITTLE_ENDIAN
for (i = 24; i >= 0; i -= 8)
if (c = (b >> i) & 0x7f)
putchar(c, flags, ttyp);
#endif
#if BYTE_ORDER == BIG_ENDIAN
if (c = (b & 0x7f))
putchar(c, flags, ttyp);
#endif
break;
case 'b':
b = *adx++;
s = (char *)*adx;
printn((u_long)b, *s++, flags, ttyp);
any = 0;
if (b) {
while (i = *s++) {
if (b & (1 << (i-1))) {
putchar(any ? ',' : '<', flags, ttyp);
any = 1;
for (; (c = *s) > 32; s++)
putchar(c, flags, ttyp);
} else
for (; *s > 32; s++)
;
}
if (any)
putchar('>', flags, ttyp);
}
break;
case 's':
s = (char *)*adx;
while (c = *s++)
putchar(c, flags, ttyp);
break;
case 'r':
s = (char *)*adx++;
prf(s, (u_int *)*adx, flags, ttyp);
break;
case '%':
putchar('%', flags, ttyp);
break;
}
adx++;
goto loop;
}
/*
* Printn prints a number n in base b.
* We don't use recursion to avoid deep kernel stacks.
*/
printn(n, b, flags, ttyp)
u_long n;
struct tty *ttyp;
{
char prbuf[11];
register char *cp;
if (b == -10) {
if ((int)n < 0) {
putchar('-', flags, ttyp);
n = (unsigned)(-(int)n);
}
b = -b;
}
cp = prbuf;
do {
*cp++ = "0123456789abcdef"[n%b];
n /= b;
} while (n);
do
putchar(*--cp, flags, ttyp);
while (cp > prbuf);
}
/*
* Panic is called on unresolvable fatal errors.
* It prints "panic: mesg", and then reboots.
* If we are called twice, then we avoid trying to
* sync the disks as this often leads to recursive panics.
*/
panic(s)
char *s;
{
int bootopt = RB_AUTOBOOT | RB_DUMP;
if (panicstr)
bootopt |= RB_NOSYNC;
else {
panicstr = s;
}
printf("panic: %s\n", s);
#ifdef KADB
if (boothowto & RB_KDB) {
int x = splnet(); /* below kdb pri */
setsoftkdb();
splx(x);
}
#endif
boot(bootopt);
}
/*
* Warn that a system table is full.
*/
tablefull(tab)
char *tab;
{
log(LOG_ERR, "%s: table is full\n", tab);
}
/*
* Print a character on console or users terminal.
* If destination is console then the last MSGBUFS characters
* are saved in msgbuf for inspection later.
*/
/*ARGSUSED*/
putchar(c, flags, tp)
register int c;
struct tty *tp;
{
extern int msgbufmapped;
if (panicstr)
constty = 0;
if ((flags & TOCONS) && tp == 0 && constty) {
tp = constty;
flags |= TOTTY;
}
if ((flags & TOCONS) && panicstr == 0 && tp == 0 && constty) {
tp = constty;
flags |= TOTTY;
}
if (flags & TOTTY) {
register s = spltty();
if (tp && (tp->t_state & (TS_CARR_ON | TS_ISOPEN)) ==
(TS_CARR_ON | TS_ISOPEN)) {
if (c == '\n')
(void) ttyoutput('\r', tp);
(void) ttyoutput(c, tp);
ttstart(tp);
flags &= ~TOCONS;
} else if ((flags & TOCONS) && tp == constty)
constty = 0;
splx(s);
}
if ((flags & TOLOG) && c != '\0' && c != '\r' && c != 0177 &&
msgbufmapped) {
if (msgbuf.msg_magic != MSG_MAGIC) {
register int i;
msgbuf.msg_magic = MSG_MAGIC;
msgbuf.msg_bufx = msgbuf.msg_bufr = 0;
for (i=0; i < MSG_BSIZE; i++)
msgbuf.msg_bufc[i] = 0;
}
msgbuf.msg_bufc[msgbuf.msg_bufx++] = c;
if (msgbuf.msg_bufx < 0 || msgbuf.msg_bufx >= MSG_BSIZE)
msgbuf.msg_bufx = 0;
}
(*v_console)(c);
}