# from: @(#)gettytab 5.14 (Berkeley) 3/27/91
# Most of the table entries here are just copies of the old getty table,
# it is by no means certain, or even likely, that any of them are optimal
# for any purpose whatever. Nor is it likely that more than a couple are
# The default gettytab entry, used to set defaults for all other
# entries, and in cases where getty is called with no table name
# cb, ce and ck are desirable on most crt's. The non-crt entries need to
# be changed to turn them off (ce@:ce@:ck@:).
# Parity defaults to even. There ought to be more alternative entries with
# no parity. The Pc entry already has no parity.. The different parities
# (none): same as even except -inpck instead of inpck for login.
# ep: getty will use raw mode (cs8 -parenb) (unless rw is set) and
# fake parity. login will use even parity (cs7 parenb -parodd).
# op: same as ep except odd parity (cs7 parenb parodd) for login.
# ap: same as ep except -inpck instead of inpck for login.
# ap overrides op and ep.
# np: 1. don't fake parity in getty. The fake parity garbles
# characters on non-terminals (like pccons) that don't
# support parity. It would probably better for getty not to
# try to fake parity. It could just use cbreak mode so as
# as not to force cs8 and let the hardware handle the parity.
# login has to be rely on the hardware anyway.
# 2. set PASS8, giving cs8 -parenb -istrip -inpck.
# np:ep: same as np except inpck.
# np:op: same as np:ep except for parodd (but parodd is overridden).
# np:ap: same as np except istrip.
:cb:ce:ck:fd#1000:im=\r\n FreeBSD (%h) (%t)\r\n\r\n:sp#1200:
# The "std.NNN" names are known to the special case
# portselector code in getty, however they can
# be assigned to any table desired.
# The "NNN-baud" names are known to the special case
# autobaud code in getty, and likewise can
# be assigned to any table desired (hopefully the same speed).
:ep:nd#1:cd#2:ff#1:td#1:sp#134:ht:nl:
:ep:nd#1:cd#2:td#1:fd#1:sp#150:ht:nl:lm=\E\72\6\6\17login\72 :
# Dial in rotary tables, speed selection via 'break'
:nx=d110:lm@:tc=150-baud:
# Fast dialup terminals, 2400/1200/300 rotary (can start either way)
D2400|d2400|Fast-Dial-2400:\
# Odd special case terminals
-|tty33|asr33|Pity the poor user of this beast:\
4|Console|Console Decwriter II:\
e|Console-1200|Console Decwriter III:\
:fd@:nd@:cd@:rw:tc=1200-baud:
X|Xwindow|X window system:\
# Wierdo special case for fast crt's with hardcopy devices
8|T9600|CRT with hardcopy:\
9|T300|CRT with hardcopy (300):\
# Plugboard, and misc other terminals
plug-9600|Plugboard-9600:\
p|P9600|Plugboard-9600-rotary:\
:pf#1:nx=P300:tc=9600-baud:
:pf#1:nx=P1200:tc=300-baud:
:pf#1:nx=P9600:tc=1200-baud:
# Auto-baud speed detect entry for Micom 600.
# Special code in getty will switch this out
# to one of the NNN-baud entries.