* Copyright (c) 1980 Regents of the University of California.
* All rights reserved. The Berkeley software License Agreement
* specifies the terms and conditions for redistribution.
* @(#)ex_vis.h 7.5 (Berkeley) %G%
* Open and visual mode definitions.
* There are actually 4 major states in open/visual modes. These
* are visual, crt open (where the cursor can move about the screen and
* the screen can scroll and be erased), one line open (on dumb glass-crt's
* like the adm3), and hardcopy open (for everything else).
* The basic state is given by bastate, and the current state by state,
* since we can be in pseudo-hardcopy mode if we are on an adm3 and the
* line is longer than 80.
* The screen in visual and crtopen is of varying size; the basic
* window has top basWTOP and basWLINES lines are thereby implied.
* The current window (which may have grown from the basic size)
* has top WTOP and WLINES lines. The top line of the window is WTOP,
* and the bottom line WBOT. The line WECHO is used for messages,
* search strings and the like. If WBOT==WECHO then we are in ONEOPEN
* or HARDOPEN and there is no way back to the line we were on if we
* go to WECHO (i.e. we will have to scroll before we go there, and
* we can't get back). There are WCOLS columns per line.
* If WBOT!=WECHO then WECHO will be the last line on the screen
* and WBOT is the line before it.
* When we are dealing with the echo area we consider the window
* to be "split" and set the variable splitw. Otherwise, moving
* off the bottom of the screen into WECHO causes a screen rollup.
* Information about each line currently on the screen includes
* the y coordinate associated with the line, the printing depth
* of the line (0 indicates unknown), and a mask which indicates
* whether the line is "unclean", i.e. whether we should check
* to make sure the line is displayed correctly at the next
short vliny
; /* Y coordinate */ /* mjm: was char */
short vdepth
; /* Depth of displayed line */ /*mjm: was char */
short vflags
; /* Is line potentially dirty ? */
var
struct vlinfo vlinfo
[TUBELINES
+ 2];
#define DEPTH(c) (vlinfo[c].vdepth)
#define LINE(c) (vlinfo[c].vliny)
#define FLAGS(c) (vlinfo[c].vflags)
* Hacks to copy vlinfo structures around
/* Kludge to make up for no structure assignment */
# define vlcopy(i, j) i.longi = j.longi
# define vlcopy(i, j) i = j;
* The current line on the screen is represented by vcline.
* There are vcnt lines on the screen, the last being "vcnt - 1".
* Vcline is intimately tied to the current value of dot,
* and when command mode is used as a subroutine fancy footwork occurs.
* To allow many optimizations on output, an exact image of the terminal
* screen is maintained in the space addressed by vtube0. The vtube
* array indexes this space as lines, and is shuffled on scrolls, insert+delete
* lines and the like rather than (more expensively) shuffling the screen
* data itself. It is also rearranged during insert mode across line
* boundaries to make incore work easier.
var
char *vtube
[TUBELINES
];
* The current cursor position within the current line is kept in
* cursor. The current line is kept in linebuf. During insertions
* we use the auxiliary array genbuf as scratch area.
* The cursor wcursor and wdot are used in operations within/spanning
* lines to mark the other end of the affected area, or the target
* Undo information is saved in a LBSIZE buffer at "vutmp" for changes
* within the current line, or as for command mode for multi-line changes
* or changes on lines no longer the current line.
* The change kind "VCAPU" is used immediately after a U undo to prevent
* two successive U undo's from destroying the previous state.
var
short vundkind
; /* Which kind of undo - from above */
var
char *vutmp
; /* Prev line image when "VCHNG" */
* State information for undoing of macros. The basic idea is that
* if the macro does only 1 change or even none, we don't treat it
* specially. If it does 2 or more changes we want to be able to
* undo it as a unit. We remember how many changes have been made
* within the current macro. (Remember macros can be nested.)
#define VC_NOTINMAC 0 /* Not in a macro */
#define VC_NOCHANGE 1 /* In a macro, no changes so far */
#define VC_ONECHANGE 2 /* In a macro, one change so far */
#define VC_MANYCHANGE 3 /* In a macro, at least 2 changes so far */
var
short vch_mac
; /* Change state - one of the above */
* For U undo's the line is grabbed by "vmove" after it first appears
* on that line. The "vUNDdot" which specifies which line has been
* saved is selectively cleared when changes involving other lines
* are made, i.e. after a 'J' join. This is because a 'JU' would
* lose completely the text of the line just joined on.
var
char *vUNDcurs
; /* Cursor just before 'U' */
var line
*vUNDdot
; /* The line address of line saved in vUNDsav */
var line vUNDsav
; /* Grabbed initial "*dot" */
#define killU() vUNDdot = NOLINE
* There are a number of cases where special behaviour is needed
* from deeply nested routines. This is accomplished by setting
* the bits of hold, which acts to change the state of the general
* visual editing behaviour in specific ways.
* HOLDAT prevents the clreol (clear to end of line) routines from
* putting out @'s or ~'s on empty lines.
* HOLDDOL prevents the reopen routine from putting a '$' at the
* end of a reopened line in list mode (for hardcopy mode, e.g.).
* HOLDROL prevents spurious blank lines when scrolling in hardcopy
* HOLDQIK prevents the fake insert mode during repeated commands.
* HOLDPUPD prevents updating of the physical screen image when
* mucking around while in insert mode.
* HOLDECH prevents clearing of the echo area while rolling the screen
* backwards (e.g.) in deference to the clearing of the area at the
* end of the scroll (1 time instead of n times). The fact that this
* is actually needed is recorded in heldech, which says that a clear
* of the echo area was actually held off.
var
short holdupd
; /* Hold off update when echo line is too long */
* Miscellaneous variables
var
short CDCNT
; /* Count of ^D's in insert on this line */
var
char DEL
[VBSIZE
]; /* Last deleted text */
var
bool HADUP
; /* This insert line started with ^ then ^D */
var
bool HADZERO
; /* This insert line started with 0 then ^D */
var
char INS
[VBSIZE
]; /* Last inserted text */
var
int Vlines
; /* Number of file lines "before" vi command */
var
int Xcnt
; /* External variable holding last cmd's count */
var
bool Xhadcnt
; /* Last command had explicit count? */
var
short dir
; /* Direction for search (+1 or -1) */
var
short doomed
; /* Disply chars right of cursor to be killed */
var
bool gobblebl
; /* Wrapmargin space generated nl, eat a space */
var
bool hadcnt
; /* (Almost) internal to vmain() */
var
bool heldech
; /* We owe a clear of echo area */
var
bool insmode
; /* Are in character insert mode */
var
char lastcmd
[5]; /* Chars in last command */
var
int lastcnt
; /* Count for last command */
var
char *lastcp
; /* Save current command here to repeat */
var
bool lasthad
; /* Last command had a count? */
var
short lastvgk
; /* Previous input key, if not from keyboard */
var
short lastreg
; /* Register with last command */
var
char *ncols
['z'-'a'+2]; /* Cursor positions of marks */
var
char *notenam
; /* Name to be noted with change count */
var
char *notesgn
; /* Change count from last command */
var
char op
; /* Operation of current command */
var
short Peek_key
; /* Peek ahead key */
var
bool rubble
; /* Line is filthy (in hardcopy open), redraw! */
var
int ex_vSCROLL
; /* Number lines to scroll on ^D/^U */
var
char *vglobp
; /* Untyped input (e.g. repeat insert text) */
var
char vmacbuf
[VBSIZE
]; /* Text of visual macro, hence nonnestable */
var
char *vmacp
; /* Like vglobp but for visual macros */
var
char *vmcurs
; /* Cursor for restore after undo d), e.g. */
var
short vmovcol
; /* Column to try to keep on arrow keys */
var
bool vmoving
; /* Are trying to keep vmovcol */
var
short vreg
; /* Reg for this command */ /* mjm: was char */
var
short wdkind
; /* Liberal/conservative words? */
var
char workcmd
[5]; /* Temporary for lastcmd */
#define LASTLINE LINE(vcnt)
#define cindent() ((outline - vlinfo[vcline].vliny) * WCOLS + outcol)
#define vputp(cp, cnt) tputs(cp, cnt, vputch)
#define vputc(c) putch(c)