etc/etc.i386/inst2.profile

HOME=/
PATH=:/bin:/sbin:/usr/bin:/usr/sbin:/usr/local/bin:
TERM=pc3        # terminal emulator, for elvis
TERMCAP="\
pc3|ibmpc3:li#25:co#80:am:bs:bw:eo:cd=\E[J:ce=\E[K:cl=\Ec:cm=\E[%i%2;%2H:\
do=\E[B:ho=\E[;H:nd=\E[C:up=\E[A:so=\E[7m:se=\E[0m:us=\E[4m:ue=\E[0m:\
:ac=l\332q\304k\277x\263j\331m\300w\302u\264v\301t\303n\305:\
:kb=^h:kh=\E[Y:ku=\E[A:kd=\E[B:kl=\E[D:kr=\E[C:"
export TERMCAP
export PATH
export TERM
export HOME
echo "NetBSD Base System Release 0.8"
echo "\a"
echo "Congratulations, you've got NetBSD on the hard disk!"
echo ""
echo "To finish installation:"
echo "Pick a temporary directory by running set_tmp_dir.  make sure it's"
echo "in a place with lots of space, probably under /usr."
echo "Then, load the remaining distribution files into that temporary"
echo "directory by issuing one of the following commands:"
echo "       load_fd"
echo "       load_qic_tape"
echo "       load_scsi_tape"
echo "or by fetching the files with ftp (see the installation notes for"
echo "information on how to do that)."
echo ""
echo "Once this is complete, extract the distribution files by issuing the"
echo "command 'extract <distribution>'  where <distribution> is the base name"
echo "of the distribution files, e.g. 'nbase08'."
echo ""
echo "Once all of the filesets you wish to install have been extracted,"
echo "enter the command 'configure' to finish setting up the system"
echo " "
echo "If you should wish to uninstall NetBSD, delete the partition by using the "
echo " DOS 5 FDISK program. If installed on the entire drive, use the FDISK/MBR"
echo " to remove the NetBSD bootstrap from the drive."
echo 'erase ^?, werase ^H, kill ^U, intr ^C'
stty newcrt werase \b intr \ 3 kill \15 erase \7f 9600
mount -at ufs
update
umask 0
set_tmp_dir()
{
        def_tmp_dir=`pwd`
        if [ "$def_tmp_dir" = "/" ]; then
                def_tmp_dir=/usr/distrib
        fi
        echo -n "what dir should be used for temporary files? [$def_tmp_dir] "
        read tmp_dir
        if [ "$tmp_dir" = "" ]; then
                tmp_dir=$def_tmp_dir
        fi
        if [ ! -d "$tmp_dir" ]; then
                /bin/rm -rf $tmp_dir
                mkdir -p $tmp_dir
        fi
}
tmp_dir()
{
        if [ "$tmp_dir" = "" ]; then
                set_tmp_dir
        fi
        cd $tmp_dir
}
load_fd()
{
        tmp_dir
        which=
        while [ "$which" != "a" -a "$which" != "b" ]; do
                echo -n "read from which floppy drive?  [a or b] "
                read which
        done
        while echo -n "Insert floppy (hit ^C to terminate, enter to load): "
        do
                read foo
                mread "$which:*.*" .
        done
}
load_qic_tape()
{
        tmp_dir
        echo -n "Insert tape into QIC tape drive and hit return to continue: "
        read foo
        tar xvf /dev/rwt0
}
load_scsi_tape()
{
        tmp_dir
        echo -n "Insert tape into SCSI tape drive and hit return to continue: "
        read foo
        tar xvf /dev/nrst0
}
extract()
{
        tmp_dir
        echo -n "Would you like to be verbose about this? [n] "
        read verbose
        case $verbose in
                y*|Y*)
                        tarverbose=--verbose
                        ;;
                *)
                        tarverbose=
                        ;;
        esac
        cat "$@"* | gunzip | (cd / ; tar --extract --file - --unlink --preserve-permissions ${tarverbose} )

        sync
}
configure()
{
        echo    "You will now be prompted for information about this"
        echo    "machine.  If you hit return, the default answer (in"
        echo    "brackets) will be used."

        echo    ""
        echo -n "What is this machine's hostname? [unknown.host.domain] "
        read hname

        if [ "$hname" = "" ]; then
                hname=unknown.host.domain
        fi
        echo $hname > /etc/myname
        proto_domain=`echo $hname | sed -e 's/[^.]*\.//'`

        echo    ""
        echo    "What domain is this machine in (this is NOT its YP"
        echo -n "domain name)? [$proto_domain] "
        read dname

        if [ "$dname" = "" ]; then
                dname=$proto_domain
        fi

#       echo -n "Setting up domain name in sendmail.cf..."
#       sed -e "s/YOUR_DOMAIN_GOES_HERE/$dname/" \
#               < /etc/sendmail.cf_proto > /etc/sendmail.cf
#       echo    " done."
#
#       echo -n "Freezing sendmail.cf..."
#       /usr/sbin/sendmail -bz
#       echo    " done."
#
#       echo    "\a"
#       echo    "WARNING: you should look over the /etc/sendmail.cf file,"
#       echo    "make sure things are set up properly, then re-freeze"
#       echo    "it with the command '/usr/sbin/sendmail -bz'."
#
#       echo    ""
#       echo    "Building aliases database..."
#       newaliases
#       echo    "\a"
#       echo    "WARNING: you should look over the /etc/aliases file,"
#       echo    "make sure things are set up properly, then re-build"
#       echo    "it with the command 'newaliases'."

        cp /etc/sendmail.cf_proto /etc/sendmail.cf

        echo    "\a"
        echo    "WARNING: sendmail will puke on your carpet when the machine"
        echo    "starts up.  If you don't want it to keep doing this, either"
        echo    "turn it off in /etc/rc, or give it a reasonable"
        echo    "/etc/sendmail.cf file."

        echo    "127.0.0.1     localhost" > /etc/hosts

        echo    ""
        echo -n "Does this machine have an ethernet interface? [y] "
        read resp
        case "$resp" in
                n*)
                ;;
        *)
                intf=
                while [ "$intf" = "" ]; do
                        echo -n "What is the primary interface name (i.e. we0, etc.)? "
                        read intf
                done
                echo -n "What is the hostname for this interface? [$hname] "
                read ifname
                if [ "$ifname" = "" ]; then
                        ifname=$hname
                fi
                ifaddr=
                while [ "$ifaddr" = "" ]; do
                        echo -n "What is the IP address associated with this interface? "
                        read ifaddr
                done
                echo "$ifaddr    $ifname `echo $ifname | sed -e s/\.$dname//`" \
                        >> /etc/hosts

                echo -n "Does this interface have a special netmask? [n] "
                read resp
                case "$resp" in
                        y*)
                                echo -n "What is the netmask? [0xffffff00] "
                                read ifnetmask
                                if [ "$ifnetmask" = "" ]; then
                                        ifnetmask=0xffffff00
                                fi
                                ;;
                        *)
                                ifnetmask=
                                ;;
                esac

                echo -n "Does this interface need additional flags? [n] "
                read resp
                case "$resp" in
                        y*)
                                echo -n "What flags? [llc0] "
                                read ifflags
                                if [ "$ifflags" = "" ]; then
                                        ifflags=llc0
                                fi
                                ;;
                        *)
                                ifflags=
                                ;;
                esac

                echo "inet $ifname $ifnetmask $ifflags" > /etc/hostname.$intf

                echo    "\a"
                echo    "WARNING: if you have any more ethernet interfaces, you"
                echo    "will have to configure them by hand.  Read the comments"
                echo    "in /etc/netstart to learn how to do this"
                ;;
        esac

        sync

        echo    ""
        echo    "OK.  You should be completely set up now."
        echo    "You should now reboot your machine by issuing the 'reboot' command"
        echo    "after removing anything that happens to be in your floppy drive."
}