.\" Copyright (c) 1983, 1991 Regents of the University of California.
.\" %sccs.include.redist.man%
.\" @(#)pty.4 6.3 (Berkeley) %G%
.Nd pseudo terminal driver
driver provides support for a device-pair termed a
A pseudo terminal is a pair of character devices, a
device. The slave device provides processes
However, whereas all other devices which provide the
have a hardware device of some sort behind them, the slave
device has, instead, another process manipulating
it through the master half of the pseudo terminal.
That is, anything written on the master device is
given to the slave device as input and anything written
on the slave device is presented as input on the master
In configuring, if an optional
the specification, that number of pseudo terminal pairs are configured;
calls apply only to pseudo terminals:
.Bl -tag -width TIOCREMOTE
Stops output to a terminal (e.g. like typing
Restarts output (stopped by
mode. Packet mode is enabled by specifying (by reference)
a nonzero parameter and disabled by specifying (by reference)
a zero parameter. When applied to the master side of a pseudo
terminal, each subsequent
from the terminal will return data written on the slave part of
the pseudo terminal preceded by a zero byte (symbolically
or a single byte reflecting control
status information. In the latter case, the byte is an inclusive-or
of zero or more of the bits:
.Bl -tag -width TIOCPKT_FLUSHWRITE
whenever the read queue for the terminal is flushed.
.It Dv TIOCPKT_FLUSHWRITE
whenever the write queue for the terminal is flushed.
whenever output to the terminal is stopped a la
whenever output to the terminal is restarted.
whenever the start and stop characters are not
While this mode is in use, the presence of control status information
to be read from the master side may be detected by a
for exceptional conditions.
to implement a remote-echoed, locally
remote login with proper back-flushing of output; it can be
used by other similar programs.
Enable/disable a mode that allows a small number of simple user
commands to be passed through the pseudo-terminal,
using a protocol similar to that of
modes are mutually exclusive.
This mode is enabled from the master side of a pseudo terminal
by specifying (by reference)
a nonzero parameter and disabled by specifying (by reference)
from the master side will return data written on the slave part of
the pseudo terminal preceded by a zero byte,
or a single byte reflecting a user control operation on the slave side.
A user control command consists of a special
operation with no data; the command is given as
is a number in the range 1-255.
will be received as a single byte on the next
is a no-op that may be used to probe for
the existence of this facility.
mode, command operations may be detected with a
for exceptional conditions.
A mode for the master half of a pseudo terminal, independent
This mode causes input to the pseudo terminal
to be flow controlled and not input edited (regardless of the
terminal mode). Each write to the control terminal produces
a record boundary for the process reading the terminal. In
normal usage, a write of data is like the data typed as a line
on the terminal; a write of 0 bytes is like typing an end-of-file
can be used when doing remote line
editing in a window manager, or whenever flow controlled input
.Bl -tag -width /dev/tty[p-r][0-9a-f]x -compact
.It Pa /dev/pty[p-r][0-9a-f]
.It Pa /dev/tty[p-r][0-9a-f]