-- ds3.my - DS3-interface objects
-- $Header: /f/osi/snmp/RCS/ds3.my,v 7.1 91/02/22 09:43:07 mrose Interim $
-- Revision 7.1 91/02/22 09:43:07 mrose
-- Revision 7.0 91/01/11 13:06:32 mrose
-- *** empty log message ***
-- Revision 7.1 91/01/11 13:02:23 mrose
-- Revision 7.0 90/09/27 10:46:07 mrose
-- *** empty log message ***
-- Acquisition, use, and distribution of this module and related
-- materials are subject to the restrictions of a license agreement.
-- Consult the Preface in the User's Manual for the full terms of
RFCxxxx-MIB DEFINITIONS ::= BEGIN
-- This MIB module uses the extended OBJECT-TYPE macro as
-- this is the MIB module for the DS3 objects
ds3 OBJECT IDENTIFIER ::= { experimental 15 }
-- the DS3 Configuration group
-- Although the objects in this group are read-only, at the
-- agent's discretion they may be made read-write so that the
-- management station, when appropriately authorized, may
-- change the behavior of the CSU, e.g., to place the device
-- into a loopback state.
-- Implementation of this group is mandatory for all systems
-- that attach to a DS3 Interface.
ds3ConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF DS3ConfigEntry
"The DS3 Configuration table."
ds3ConfigEntry OBJECT-TYPE
"An entry in the DS3 Configuration table."
DisplayString (SIZE (0..255))
"The index value which uniquely identifies the
CSU to which this entry is applicable."
"An index value that uniquely identifies a DS3
Interface. The interface identified by a
particular value of this index is the same
interface as identified by the same value an
ifIndex object instance."
ds3TimeElapsed OBJECT-TYPE
"The number of seconds, including partial
seconds, that have elapsed since the beginning of
the current error-measurement period."
ds3ValidIntervals OBJECT-TYPE
"The number of previous intervals for which valid
data was collected. The value will be 96 unless
the CSU device was brought online within the last
24 hours, in which case the value will be the
number of complete 15 minute intervals the CSU has
"This variable indicates the variety of DS3 C-bit
application implementing this circuit. The type
of circuit affects the interpretation of the usage
and error statistics. The rate of all of them is
The values, in sequence, describe:
ds3M23 ANSI T1.107-1988 [10]
ds3SYNTRAN ANSI T1.107-1988 [10]
ds3C-bitParity ANSI T1.107a-1989 [10a]
ds3ClearChannel ANSI T1.102-1987 [9]
ds3ZeroCoding OBJECT-TYPE
"This variable describes the variety of Zero Code
Suppression used on the link, which in turn
affects a number of its characteristics.
ds3B3ZS refers to the use of specified patterns of
normal bits and bipolar violations which are used
to replace sequences of zero bits of a specified
ds3LocalLoopbackLocalSide(2),
ds3LocalLoopbackRemoteSide(3),
ds3RemoteLoopbackLocalSide(4),
ds3RemoteLoopbackRemoteSide(5)
"This variable represents the loopback state of
the CSU. Devices supporting read/write access
should return badValue in response to a requested
loopback state that the CSU does not support. The
Not in the loopback state. A device that is
not capable of performing a loopback on
either interface shall always return this as
ds3LocalLoopbackLocalSide
Signal received from the local side of the
device is looped back at the local connector
(eg, without involving the CSU).
ds3LocalLoopbackRemoteSide
Signal received from the local side of the
device is looped back at the remote connector
ds3RemoteLoopbackLocalSide
Signal received from the remote side of the
device is looped back at the local connector
ds3RemoteLoopbackRemoteSide
Signal received from the remote side of the
device is looped back at the remote connector
(eg, without involving the CSU).
Note that M23 and ClearChannel interfaces do not
support the Loopback managed object."
"This variable indicates what type of code is
being sent across the DS1 circuit by the CSU. The
sending looped or normal data
sending a loopback request
sending the code to choose a specific
sending a loopback termination request
sending a Test pattern as defined in
ds3YellowAlarm OBJECT-TYPE
"This variable indicates if a Yellow
"This variable indicates if a Red Alarm
::= { ds3ConfigEntry 10 }
ds3CircuitIdentifier OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
"This variable contains the transmission
vendor's circuit identifier, for the
purpose of facilitating troubleshooting."
::= { ds3ConfigEntry 11 }
-- the DS3 Interval group
-- Implementation of this group is mandatory for all systems
-- that attach to a DS3 interface.
-- The DS3 Interval Table contains various statistics
-- collected by each CSU over the previous 24 hours of
-- operation. The past 24 hours are broken into 96 completed
ds3IntervalTable OBJECT-TYPE
SYNTAX SEQUENCE OF DS3IntervalEntry
"The DS3 Interval table."
ds3IntervalEntry OBJECT-TYPE
"An entry in the DS3 Interval table."
INDEX { ds3IntervalIndex, ds3IntervalNumber }
::= { ds3IntervalTable 1 }
ds3IntervalIndex OBJECT-TYPE
"The index value which uniquely identifies the
CSU to which this entry is applicable. The
interface identified by a particular value of
this index is the same interface as identified
by the same value an DS3CSUIndex object
::= { ds3IntervalEntry 1 }
ds3IntervalNumber OBJECT-TYPE
"A number between 1 and 96, where 1 is the most
recently completed 15 minute interval and 96 is
the least recently completed 15 minutes
interval (assuming that all 96 intervals are
::= { ds3IntervalEntry 2 }
ds3IntervalESs OBJECT-TYPE
"The counter associated with the number of
Errored Seconds, as defined by [12], encountered
by a DS3 CSU in one of the previous 96,
individual 15 minute, intervals."
::= { ds3IntervalEntry 3 }
ds3IntervalSESs OBJECT-TYPE
"The counter associated with the number of
Severely Errored Seconds, as defined by [12],
encountered by a DS3 CSU in one of the previous
96, individual 15 minute, intervals."
::= { ds3IntervalEntry 4 }
ds3IntervalSEFSs OBJECT-TYPE
"The counter associated with the number of
Severely Errored Framing Seconds, as defined by
[12], encountered by a DS3 CSU in one of the
previous 96, individual 15 minute, intervals."
::= { ds3IntervalEntry 5 }
ds3IntervalUASs OBJECT-TYPE
"The counter associated with the number of
Unavailable Seconds, as defined by [12],
encountered by a DS3 CSU in one of the previous
96, individual 15 minute, intervals."
::= { ds3IntervalEntry 6 }
ds3IntervalCSSs OBJECT-TYPE
"The counter associated with the number of
Controlled Slip Seconds, as defined by [12],
encountered by a DS3 CSU in one of the previous
96, individual 15 minute, intervals.
Note that SYNTRAN interfaces are the only
interfaces that support the Controlled Slip
Seconds managed object. Accordingly, agents
configured with non-SYNTRAN interfaces may treat
this object as having an ACCESS clause value of
::= { ds3IntervalEntry 7}
ds3IntervalBPVs OBJECT-TYPE
"The counter associated with the number of Bipolar
Violations, as defined by [12], encountered by a
DS3 CSU in one of the previous 96, individual 15
::= { ds3IntervalEntry 8 }
ds3IntervalCVs OBJECT-TYPE
"The counter associated with the number of Coding
Violations, as defined by [12], encountered by a
DS3 CSU in one of the previous 96, individual 15
::= { ds3IntervalEntry 9 }
-- Implementation of this group is mandatory for all systems
-- that attach to a DS3 Interface.
-- The DS3 current table contains various statistics being
-- collected for the current 15 minute interval.
ds3CurrentTable OBJECT-TYPE
SYNTAX SEQUENCE OF DS3CurrentEntry
ds3CurrentEntry OBJECT-TYPE
"An entry in the DS3 Current table."
INDEX { ds3CurrentIndex }
::= { ds3CurrentTable 1 }
ds3CurrentIndex OBJECT-TYPE
"The index value which uniquely identifies the CSU
to which this entry is applicable. The interface
identified by a particular value of this index is
the same interface as identified by the same value
an DS3CSUIndex object instance."
::= { ds3CurrentEntry 1 }
ds3CurrentESs OBJECT-TYPE
"The counter associated with the number of Errored
Seconds, as defined by [12], encountered by a DS3
CSU in the current 15 minute interval."
::= { ds3CurrentEntry 2 }
ds3CurrentSESs OBJECT-TYPE
"The counter associated with the number of
Severely Errored Seconds, as defined by [12],
encountered by a DS3 CSU in the current 15 minute
::= { ds3CurrentEntry 3 }
ds3CurrentSEFSs OBJECT-TYPE
"The counter associated with the number of
Severely Errored Framing Seconds, as defined by
[12], encountered by a DS3 CSU in the current 15
::= { ds3CurrentEntry 4 }
ds3CurrentUASs OBJECT-TYPE
"The counter associated with the number of
Unavailable Seconds, as defined by [12],
encountered by a DS3 CSU in the current 15 minute
::= { ds3CurrentEntry 5 }
ds3CurrentCSSs OBJECT-TYPE
"The counter associated with the number of
Controlled Slip Seconds, as defined by [12],
encountered by a DS3 CSU in the current 15 minute
Note that SYNTRAN interfaces are the only
interfaces that support the Controlled Slip
Seconds managed object. Accordingly, agents
configured with non-SYNTRAN interfaces may treat
this object as having an ACCESS clause value of
::= { ds3CurrentEntry 6 }
ds3CurrentBPVs OBJECT-TYPE
"The counter associated with the number of Bipolar
Violations, as defined by [12], encountered by a
DS3 CSU in the current 15 minute interval."
ds3CurrentCVs OBJECT-TYPE
"The counter associated with the number of Coding
Violations, as defined by [12], encountered by a
DS3 CSU in the current 15 minute interval."
::= { ds3CurrentEntry 8 }
-- Implementation of this group is mandatory for all systems
-- The DS3 Total Table contains the cumulative sum of the
-- various statistics for the 24 hour interval preceding the
-- first valid interval in the DS3CurrentTable.
ds3TotalTable OBJECT-TYPE
SYNTAX SEQUENCE OF DS3TotalEntry
"The DS3 Total table. 24 hour interval."
ds3TotalEntry OBJECT-TYPE
"An entry in the DS3 Total table."
ds3TotalIndex OBJECT-TYPE
"The index value which uniquely identifies the CSU
to which this entry is applicable. The interface
identified by a particular value of this index is
the same interface as identified by the same value
an DS3CSUIndex object instance."
"The counter associated with the number of Errored
Seconds, as defined by [12], encountered by a DS3
CSU in the previous 24 hour interval."
"The counter associated with the number of
Severely Errored Seconds, as defined by [12],
encountered by a DS3 CSU in the previous 24 hour
ds3TotalSEFSs OBJECT-TYPE
"The counter associated with the number of
Severely Errored Framing Seconds, as defined by
[12], encountered by a DS3 CSU in the previous 24
"The counter associated with the number of
Unavailable Seconds, as defined by [12],
encountered by a DS3 CSU in the previous 24 hour
"The counter associated with the number of
Controlled Slip Seconds, as defined by [12],
encountered by a DS3 CSU in the previous 24 hour
Note that SYNTRAN interfaces are the only
interfaces that support the Controlled Slip
Seconds managed object. Accordingly, agents
configured with non-SYNTRAN interfaces may treat
this object as having an ACCESS clause value of
"The counter associated with the number of Bipolar
Violations, as defined by [12], encountered by a
DS3 CSU in the previous 24 hour interval."
"The counter associated with the number of Coding
Violations, as defined by [12], encountered by a
DS3 CSU in the previous 24 hour interval."