.\" Copyright (c) 1979 The Regents of the University of California.
.\" Redistribution and use in source and binary forms, with or without
.\" modification, are permitted provided that the following conditions
.\" 1. Redistributions of source code must retain the above copyright
.\" notice, this list of conditions and the following disclaimer.
.\" 2. Redistributions in binary form must reproduce the above copyright
.\" notice, this list of conditions and the following disclaimer in the
.\" documentation and/or other materials provided with the distribution.
.\" 3. All advertising materials mentioning features or use of this software
.\" must display the following acknowledgement:
.\" This product includes software developed by the University of
.\" California, Berkeley and its contributors.
.\" 4. Neither the name of the University nor the names of its contributors
.\" may be used to endorse or promote products derived from this software
.\" without specific prior written permission.
.\" THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
.\" ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
.\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
.\" @(#)pxin1.n 5.2 (Berkeley) 4/17/91
assembly language, using the
systems programming language C.
consists of a main procedure that reads in the interpreter code,
a main interpreter loop that transfers successively to various
code segments implementing the abstract machine operations,
built-in procedures and functions,
and several routines that support the implementation of the
Pascal input-output environment.
The interpreter runs at a fraction of the speed of equivalent
compiled C code, with this fraction varying from 1/5 to 1/15.
The interpreter occupies 18.5K bytes of instruction space, shared among
all processes executing Pascal, and has 4.6K bytes of data space (constants,
error messages, etc.) a copy of which is allocated to each executing process.
Format of the object file
normally interprets the code left in an object file by a run of the
The file where the translator puts the object originally, and the most
commonly interpreted file, is called
In order that all persons using
share a common text image, this executable file is
a small process that coordinates with the interpreter to start
The interpreter code is placed
at the end of a special ``header'' file and the size of the initialized
data area of this header file is expanded to include this code,
so that during execution it is located at an
easily determined address in its data space.
When executed, the object process creates a
creates another process by doing a
and arranges that the resulting parent process becomes an instance of
The child process then writes the interpreter code through
the pipe that it has to the
interpreter process parent.
When this process is complete, the child exits.
The real advantage of this approach is that it does not require modifications
to the shell, and that the resultant objects are ``true objects'' not
requiring special treatment.
A simpler mechanism would be to determine the name of the file that was
executed and pass this to the interpreter.
However it is not possible to determine this name
\*(dd\ For instance, if the
program is placed in the directory
the first argument to the program, nominally the programs name, is
While it would be possible to search in the standard place,
i.e. the current directory, and the system directories
for a corresponding object file,
this would be expensive and not guaranteed to succeed.
Several shells exist that allow other directories to be searched
for commands, and there is,
no way to determine what these directories are.
General features of object code
Pascal object code is relocatable as all addressing references for
control transfers within the code are relative.
The code consists of instructions interspersed with inline data.
All instructions have a length that is an even number of bytes.
No variables are kept in the object code area.
The first byte of a Pascal interpreter instruction contains an operation
This allows a total of 256 major operation codes, and 232 of these are
The second byte of each interpreter instruction is called the
It contains a small integer that may, for example, be used as a
block-structure level for the associated operation.
If the instruction can take a longword constant,
this constant is often packed into the sub-opcode
if it fits into 8 bits and is not zero.
A sub-opcode value of zero specifies that the constant would not
fit and therefore follows in the next word.
This is a space optimization, the value of zero for flagging
the longer case being convenient because it is easy to test.
Other instruction formats are used.
instructions take an offset in the following word,
operators that load constants onto the stack
take arbitrarily long inline constant values,
and many operations deal exclusively with data on the
interpreter stack, requiring no inline data.
Stack structure of the interpreter
The interpreter emulates a stack-structured Pascal machine.
The ``load'' instructions put values onto the stack, where all
arithmetic operations take place.
The ``store'' instructions take values off the stack
and place them in an address that is also contained on the stack.
The only way to move data or to compute in the machine is with the stack.
To make the interpreter operations more powerful
and to thereby increase the interpreter speed,
the arithmetic operations in the interpreter are ``typed''.
That is, length conversion of arithmetic values occurs when they are
This eliminates interpreter cycles for length conversion
and the associated overhead.
For example, when adding an integer that fits in one byte to one that
requires four bytes to store, no ``conversion'' operators are required.
The one byte integer is loaded onto the stack, followed by the four
byte integer, and then an adding operator is used that has, implicit
in its definition, the sizes of the arguments.
Data types in the interpreter
The interpreter deals with several different fundamental data types.
In the memory of the machine, 1, 2, and 4 byte integers are supported,
with only 2 and 4 byte integers being present on the stack.
The interpreter always converts to 4 byte integers when there is a possibility
of overflowing the shorter formats.
This corresponds to the Pascal language definition of overflow in
arithmetic operations that requires that the result be correct
if all partial values lie within the bounds of the base integer type:
Character constants are treated similarly to 1 byte integers for
most purposes, as are Boolean values.
All enumerated types are treated as integer values of
an appropriate length, usually 1 byte.
The interpreter also has real numbers, occupying 8 bytes of storage,
and sets and strings of varying length.
The appropriate operations are included for each data type, such as
set union and intersection and an operation to write a string.
data formats are supported by the interpreter.
The smallest unit of storage occupied by any variable is one byte.
thus degenerate to simple memory to memory transfers with
The interpreter runtime environment uses a stack data area and a heap
data area, that are kept at opposite ends of memory
and grow towards each other.
All global variables and variables local to procedures and functions
are kept in the stack area.
Dynamically allocated variables and buffers for input/output are
The addressing of block structured variables is done by using
that contains the address of its stack frame
for each statically active block.\*(Dg
\*(dg\ Here ``block'' is being used to mean any
This display is referenced by instructions that load and store
variables and maintained by the operations for
block entry and exit, and for non-local
Three ``global'' variables in the interpreter, in addition to the
is a pointer to the display entry for the current block;
is the abstract machine location counter;
is a register that holds the address of the main interpreter
loop so that returning to the loop to fetch the next instruction is
The stack frame structure
has a stack frame consisting of three parts:
a block mark, local variables, and temporary storage for partially
The stack in the interpreter grows from the high addresses in memory
so that those parts of the stack frame that are ``on the top''
of the stack have the most negative offsets from the display
The major parts of the stack frame are represented in Figure 1.1.
Note that the local variables of each block
have negative offsets from the corresponding display entry,
the ``first'' local variable having offset `\-2'.
The block mark contains the saved information necessary
to restore the environment when the current block exits.
It consists of two parts.
The first and top-most part is saved by the
instruction in the interpreter.
This information is not present for the main program
as it is never ``called''.
The second part of the block mark is created by the
begin block operator that also allocates and clears the
The format of these blocks is represented in Figure 1.2.
operator includes the line number
that is printed if the program execution ends abnormally;
giving the return address;
and the current display entry address
begin operator saves the previous display contents at the level
of this block, so that the display can be restored on block exit.
A pointer to the beginning line number and the
name of this block is also saved.
This information is stored in the interpreter object code in-line after the
It is used in printing a post-mortem backtrace.
The saved file name and buffer reference are necessary because of
the input/output structure
(this is discussed in detail in
The top of stack reference gives the value the stack pointer should
have when there are no expression temporaries on the stack.
It is used for a consistency check in the
line number operators in the interpreter, that occurs before
This helps to catch bugs in the interpreter, that often manifest
themselves by leaving the stack non-empty between statements.
Note that there is no explicit static link here.
Thus to set up the display correctly after a non-local
statement one must ``unwind''
through all the block marks on the stack to rebuild the display.
Arguments and return values
A function returns its value into a space reserved by the calling
are placed on top of this return area.
calls, arguments are placed at the end of the expression evaluation area
completes, expression evaluation can continue
after popping the arguments to the
exactly as if the function value had been ``loaded''.
are also popped off the stack by the caller
after its execution ends.
As a simple example consider the following stack structure
the calling sequence for this function would be:
to clear space for the return value,
on the stack with a ``right value'' operator,
and can then complete evaluation of the containing expression.
The operations used here will be explained in section 2.
10 \*bfunction\fR f(i: integer): real;
would have code sequence:
operator takes 9 bytes of inline data.
The first byte specifies the
length of the function name.
The second longword specifies the
amount of local variable storage, here none.
The succeeding two lines give the line number of the
and the name of the block
operator places a name pointer in the block mark.
first takes an address of the
using the address of operator
The next operation in the interpretation of this function is the loading
and the first variable in the local variable area.
completes by assigning the 4 byte integer on the stack to the 8 byte
return location, hence the
assignment operator, and then uses the
operator to exit the current block.
The main interpreter loop
The main interpreter loop is simply:
\fBcaseb\fR (lc)+,$0,$255
<table of opcode interpreter addresses>
The main opcode is extracted from the first byte of the instruction
and used to index into the table of opcode interpreter addresses.
Control is then transferred to the specified location.
The sub-opcode may be used to index the display,
or to specify one of several relational operators.
In the cases where a constant is needed, but it
is not small enough to fit in the byte sub-operator,
a zero is placed there and the constant follows in the next word.
Zero is easily tested for,
as the instruction that fetches the
sub-opcode sets the condition code flags.
is all that is needed to effect this packing of data.
This technique saves space in the Pascal
The address of the instruction at
is always contained in the register variable
Thus a return to the main interpreter is simply:
that is both quick and occupies little space.
Errors during interpretation fall into three classes:
1) Interpreter detected errors.
2) Hardware detected errors.
Interpreter detected errors include I/O errors and
built-in function errors.
These errors cause a subroutine call to an error routine
with a single parameter indicating the cause of the error.
Hardware errors such as range errors and overflows are
fielded by a special routine that determines the opcode
It then calls the error routine with an appropriate error
External events include interrupts and system limits such
They generate a call to the error routine with an
The error routine processes the error condition,
printing an appropriate error message and usually
a backtrace from the point of the error.