* Copyright (c) 1988 Regents of the University of California.
* This code is derived from software contributed to Berkeley by
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by the University of
* California, Berkeley and its contributors.
* 4. Neither the name of the University nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* @(#)kdbreg.h 7.3 (Berkeley) 6/28/90
* The KDB50 registers are embedded inside the bi interface
* general-purpose registers.
short kdb_xxx
; /* first half of GPR 0 unused */
short kdb_ip
; /* initialisation and polling */
short kdb_sa
; /* status & address (r/o half) */
short kdb_sw
; /* status & address (w/o half) */
* Bits in KDB status register during initialisation
#define KDB_ERR 0x8000 /* error */
#define KDB_STEP4 0x4000 /* step 4 has started */
#define KDB_STEP3 0x2000 /* step 3 has started */
#define KDB_STEP2 0x1000 /* step 2 has started */
#define KDB_STEP1 0x0800 /* step 1 has started */
#define KDB_DI 0x0100 /* controller implements diagnostics */
#define KDB_IE 0x0080 /* interrupt enable */
#define KDB_NCNRMASK 0x003f /* in STEP1, bits 0-2=NCMDL2, 3-5=NRSPL2 */
#define KDB_IVECMASK 0x007f /* in STEP2, bits 0-6 are interruptvec / 4 */
/* after initialisation: */
#define KDB_GO 0x0001 /* run */
"\20\20ERR\17STEP4\16STEP3\15STEP2\14STEP1\13oldNV\12oldQB\11DI\10IE\1GO"
* KDB Communications Area. Note that this structure definition
* requires NRSP and NCMD to be defined already.
short ca_xxx1
; /* unused */
char ca_xxx2
; /* unused */
char ca_bdp
; /* BDP to purge XXX */
short ca_cmdint
; /* command ring transition flag */
short ca_rspint
; /* response ring transition flag */
long ca_rspdsc
[NRSP
];/* response descriptors */
long ca_cmddsc
[NCMD
];/* command descriptors */
* Simplified routines (crash dump) use one command and one response.
* Asserting KDB_MAP in values placed in mscp_seq.seq_buffer tells
* the KDB to use mscp_seq.seq_mapbase as a set of PTEs and seq_buffer
* as an offset value. Hence we need no mappings; the KDB50 reads
* the hardware page tables directly. (Without KDB_MAP, seq_bufer
* represents the physical memory address instead, and seq_mapbase is
#define KDB_MAP 0x80000000
#define KDB_PHYS 0 /* pseudo flag */
int ks_sys
; /* transfers done from Sysmap */
int ks_paget
; /* transfers done from Usrptmap */
int ks_contig
; /* transfers done from contiguous user map */
int ks_copies
; /* transfers done from pte copies */
int ks_mapwait
; /* number of out-of-map waits */
int ks_cmd
[KS_MAXC
];/* commands started at once */
int ks_inval
; /* copies due to !PG_V */