projects / unix-history / blob
? search:
summary | tags | clone url | shortlog | log | commit | commitdiff | tree
blame | history | raw | HEAD
This commit was generated by cvs2svn to track changes on a CVS vendor
[unix-history] / etc / etc.i386 / inst2.profile
stty status '^T'
trap : 2
trap : 3
HOME=/; export HOME
PATH=/sbin:/bin:/usr/sbin:/usr/bin:/usr/distbin; export PATH
if [ -e /fastboot ]
then
echo Fast boot ... skipping disk checks
else
echo Automatic reboot in progress...
fsck -p
case $? in
0)
;;
2)
exit 1
;;
4)
echo; echo README README README README README README README
echo
echo "NOTE: The above errors are expected if this is the"
echo "first time you have booted from the hard disk after"
echo "completing the floppy install"; echo
echo "Automatic file system check changed the root file system"
echo "The system must halt for these corrections to take effect"
echo
reboot
echo "reboot failed... help!"
exit 1
;;
8)
echo "Automatic file system check failed... help!"
exit 1
;;
12)
echo "Reboot interrupted"
exit 1
;;
130)
exit 1
;;
*)
echo "Unknown error in reboot"
exit 1
;;
esac
fi
trap 2
trap "echo 'Reboot interrupted'; exit 1" 3
umount -a >/dev/null 2>&1
mount -a -t nonfs
rm -f /fastboot
(cd /var/run && { rm -rf -- *; cp /dev/null utmp; chmod 644 utmp; })
TERM=pc3 # terminal emulator, for elvis
TERMCAP="\
pc3|ibmpc3:li#25:co#80:am:bs:bw:eo:cd=\E[J:ce=\E[K:cl=\Ec:cm=\E[%i%2;%2H:\
do=\E[B:ho=\E[;H:nd=\E[C:up=\E[A:so=\E[7m:se=\E[0m:us=\E[4m:ue=\E[0m:\
:ac=l\332q\304k\277x\263j\331m\300w\302u\264v\301t\303n\305:\
:kb=^h:kh=\E[Y:ku=\E[A:kd=\E[B:kl=\E[D:kr=\E[C:"
OPSYSTEM=FreeBSD
RELEASE="1.0"
export TERMCAP
export TERM
echo "${OPSYSTEM} Base System Release ${RELEASE}"
echo "\a"
echo "Congratulations, you've got ${OPSYSTEM} on the hard disk!"
echo
echo "Press the return key for more installation instructions"
read junkit
echo
echo "To finish installation:"
echo "Pick a temporary directory by running set_tmp_dir. Make sure it's"
echo "in a place with lots of space, probably under /usr."
echo "Then, load the remaining distribution files into that temporary"
echo "directory by issuing one of the following commands:"
echo
echo " load_fd load_qic_tape load_scsi_tape"
echo
echo "or by fetching the files with ftp (see the installation notes for"
echo "information on how to do that)."
echo
echo "Once this is complete, extract the distribution files by issuing the"
echo "command 'extract <distribution>' where <distribution> is the base name"
echo "of the distribution files, e.g. 'base10'."
echo
echo "Once all of the filesets you wish to install have been extracted,"
echo "enter the command 'configure' to finish setting up the system"
echo " "
echo "If you should wish to uninstall ${OPSYSTEM}, delete the partition by using the"
echo "DOS 5 FDISK program. If installed on the entire drive, use the FDISK/MBR"
echo "to remove the ${OPSYSTEM} bootstrap from the drive."
echo 'erase ^?, werase ^H, kill ^U, intr ^C'
stty newcrt werase \b intr \ 3 kill \15 erase \7f 9600
umask 0
set_tmp_dir()
{
def_tmp_dir=`pwd`
[ "$def_tmp_dir" = "/" ] && def_tmp_dir=/usr/distrib
echo -n "Copy files to which directory? [${def_tmp_dir}] "
read tmp_dir
[ ! "$tmp_dir" ] && tmp_dir=$def_tmp_dir
if [ ! -d "$tmp_dir" ]; then
/bin/rm -rf $tmp_dir
mkdir -p $tmp_dir
fi
echo
}
tmp_dir()
{
if [ "$tmp_dir" = "" ]; then
set_tmp_dir
fi
cd $tmp_dir
}
load_fd()
{
tmp_dir
drive=
altdrive=
subdir=
while [ -z "$drive" ]; do
echo -n "Read from which drive (or ? for help)? [c] "
read answer junk
case "${answer:-c}" in
a*b|A*B)
drive=A; altdrive=B
;;
b*a|B*A)
drive=B; altdrive=A
;;
a*|A*)
drive=A; altdrive=A
;;
b*|B*)
drive=B; altdrive=B
;;
c*|C*)
while read data; do
msdos_device=`expr X"$data" : 'X[ ]*\([^ ]*\)[^M]*pcfs'`
msdos_dir=`expr X"$data" : 'X[ ]*[^ ]*[ ]*\([^ ]*\)'`
[ "${msdos_device}" ] && break
done </etc/fstab
if [ ! "$msdos_device" ]; then
echo
echo "Cannot find MS-DOS in filesystem table"
continue
fi
drive=C; altdrive=C
while :; do
echo
echo -n "Read from which MS-DOS drive C: directory? [/] "
read resp junk
newdir=$(echo "${resp:-/}" | \
awk '{ sub(/^[Cc]*:*/, ""); gsub(/\\/, "/"); gsub(/^\/*/, ""); gsub(/\/*$/, ""); print $0 }')
if [ -d ${msdos_dir}/${newdir} ]; then
subdir=$newdir
break
else
echo "C:/${newdir}: No such directory"
fi
done
;;
q*|Q*)
drive=q
;;
\?*)
echo
echo "Enter: To:"
echo "------ ---"
echo " a Read from floppy drive A:"
echo " b Read from floppy drive B:"
echo " c Read from MS-DOS hard drive C:"
echo " ab Alternate between A: and B:, starting with A:"
echo " ba Alternate between A: and B:, starting with B:"
echo " q Quit"
echo
;;
esac
done
verbose=-v
interactive=-i
if [ "$drive" = "C" ]; then
dir=${msdos_dir}
elif [ "$drive" != "q" ]; then
dir=/tmp/floppy
[ -d $dir ] && umount $dir >/dev/null 2>&1
[ -f $dir ] && rm -f $dir
mkdir -p $dir
fi
while [ "$drive" != "q" ]
do
device=/dev/fd0a
[ "$drive" = "B" ] && device=/dev/fd1a
[ "$drive" = "C" ] && device=${msdos_device}
echo;
if [ "$drive" != "C" ]; then
echo "Insert floppy in drive $drive:, then press RETURN to copy files,"
echo -n "or enter option (? for help): "
else
echo -n "Press RETURN to copy files, or enter option (? for help): "
fi
read answer junk
case "${answer:-g}" in
c*|C*)
if [ "$drive" != "C" ]; then
echo "Cannot change directory: not reading from MS-DOS drive C:"
else
echo
echo -n "Read from which MS-DOS drive C: directory? [/${subdir}] "
read resp junk
[ ! "$resp" ] && resp="/$subdir"
absolute=`expr X"$resp" : 'X[Cc]*:*\([/\]\)'`
subsub=$(echo "${resp}" | \
awk '{ sub(/^[Cc]*:*/, ""); gsub(/\\/, "/"); gsub(/^\/*/, ""); gsub(/\/*$/, ""); print $0 }')
if [ "$absolute" -o ! "$subdir" ]; then
newsub=$subsub
else
newsub=$subdir/$subsub
fi
if [ -d ${dir}/${newsub} ]; then
subdir=$newsub
else
echo "C:/${newsub}: No such directory"
fi
fi
;;
g*|G*)
sync
if [ "$drive" = "C" ]; then
[ "$verbose" ] &&
{ echo; echo "Please wait. Copying files from MS-DOS C:/${subdir}"; }
cp ${msdos_dir}/${subdir}/* .
sync
elif mount -t pcfs $verbose $device $dir; then
[ "$verbose" ] &&
{ echo; echo "Please wait. Copying files to disk..."; }
cp $interactive $dir/* .
sync
umount $dir
tmp=$drive; drive=$altdrive; altdrive=$tmp
fi
;;
i*|I*)
tmp=$interactive; interactive=; [ -z "$tmp" ] && interactive=-i
tmp=on; [ -z "$interactive" ] && tmp=off
echo "interactive mode is $tmp"
;;
l*|L*)
sync
[ "$verbose" ] && echo "Directory of ${drive}:/${subdir}"
if [ "$drive" = "C" ]; then
ls -l $dir/${subdir}
else
umount $dir >/dev/null 2>&1
if mount -t pcfs $device $dir; then
ls -l $dir/${subdir}
umount $dir
fi
fi
;;
o*|O*)
tmp=$drive; drive=$altdrive; altdrive=$tmp
;;
q*|Q*)
drive=q
;;
s*|S*)
echo; echo -n "tmp_dir is set to $tmp_dir"
[ "$tmp_dir" != "`pwd`" ] && echo -n " (physically `pwd`)"
echo; echo "Free space in tmp_dir:"
df -k .
echo -n "Reading from drive $drive:"
[ "$drive" != "$altdrive" ] && echo -n " and drive $altdrive:"
echo
tmp=on; [ -z "$verbose" ] && tmp=off
echo "Verbose mode is $tmp"
tmp=on; [ -z "$interactive" ] && tmp=off
echo "Interactive mode is $tmp"
;;
v*|V*)
tmp=$verbose; verbose=; [ -z "$tmp" ] && verbose=-v
tmp=on; [ -z "$verbose" ] && tmp=off
echo "verbose mode is $tmp"
;;
\?)
echo
echo "Enter: To:"
echo "----- ---"
echo "(just RETURN) Copy files from ${drive}:/${subdir} to $tmp_dir"
echo " c Change directory of MS-DOS drive C:"
echo " i Toggle interactive mode (cp -i)"
echo " l List directory of current drive"
echo " o Read from alternate floppy drive"
echo " q Quit"
echo " s Show status"
echo " v Toggle verbose mode"
echo
;;
esac
done
echo "Working directory: `pwd`"
unset verbose answer drive altdrive device dir subdir tmp interactive
}
load_qic_tape()
{
tmp_dir
echo -n "Insert tape into QIC tape drive and hit return to continue: "
read foo
tar xvf /dev/rwt0
}
load_scsi_tape()
{
tmp_dir
echo -n "Insert tape into SCSI tape drive and hit return to continue: "
read foo
tar xvf /dev/nrst0
}
extract()
{
tmp_dir
echo -n "Would you like to be verbose about this? [n] "
read verbose
case $verbose in
y*|Y*)
tarverbose=--verbose
;;
*)
tarverbose=
;;
esac
#XXX ugly hack to eliminate busy files, copy them to /tmp and use them
#from there...
cp -p /bin/cat /usr/bin/gunzip /usr/bin/tar /tmp
for i in $*; do
/tmp/cat "$i"* |
/tmp/gunzip |
(cd / ; /tmp/tar --extract --file - --preserve-permissions ${tarverbose} )
done
rm -f /tmp/cat /tmp/gunzip /tmp/tar
sync
}
configure()
{
echo "You will now be prompted for information about this"
echo "machine. If you hit return, the default answer (in"
echo "brackets) will be used."
echo
echo -n "What is this machine's hostname? [unknown.host.domain] "
read hname
if [ "$hname" = "" ]; then
hname=unknown.host.domain
fi
echo $hname > /etc/myname
proto_domain=`echo $hname | sed -e 's/[^.]*\.//'`
echo
echo "What domain is this machine in (this is NOT its YP"
echo -n "domain name)? [$proto_domain] "
read dname
if [ "$dname" = "" ]; then
dname=$proto_domain
fi
echo
echo -n "Does this machine have an ethernet interface? [y] "
read resp
case "$resp" in
n*)
;;
*)
intf=
while [ "$intf" = "" ]; do
echo -n "What is the primary interface name (i.e. we0, etc.)? "
read intf
done
echo -n "What is the hostname for this interface? [$hname] "
read ifname
if [ "$ifname" = "" ]; then
ifname=$hname
fi
ifaddr=
while [ "$ifaddr" = "" ]; do
echo -n "What is the IP address associated with this interface? "
read ifaddr
done
echo "$ifaddr $ifname `echo $ifname | sed -e s/\.$dname//`" \
>> /etc/hosts
echo -n "Does this interface have a special netmask? [n] "
read resp
case "$resp" in
y*)
echo -n "What is the netmask? [0xffffff00] "
read ifnetmask
if [ "$ifnetmask" = "" ]; then
ifnetmask=0xffffff00
fi
;;
*)
ifnetmask=
;;
esac
echo -n "Does this interface need additional flags? [n] "
read resp
case "$resp" in
y*)
echo -n "What flags? [llc0] "
read ifflags
if [ "$ifflags" = "" ]; then
ifflags=llc0
fi
;;
*)
ifflags=
;;
esac
echo "inet $ifname $ifnetmask $ifflags" > /etc/hostname.$intf
echo "\a"
echo "WARNING: if you have any more ethernet interfaces, you"
echo "will have to configure them by hand. Read the comments"
echo "in /etc/netstart to learn how to do this"
;;
esac
sync
echo
echo "OK. You should be completely set up now."
echo "You should now reboot your machine by issuing the 'reboot' command"
echo "after removing anything that happens to be in your floppy drive."
}
Continuous source code history from original PDP-7 UNIX to FreeBSD 2, the first fully unencumbered FreeBSD release.