projects / unix-history / blob
? search:
summary | tags | clone url | shortlog | log | commit | commitdiff | tree
blame | history | raw | HEAD
shouldn't include ioctl.h here
[unix-history] / usr / src / sys / hp300 / dev / scsireg.h
/*
* Copyright (c) 1990 The Regents of the University of California.
* All rights reserved.
*
* This code is derived from software contributed to Berkeley by
* Van Jacobson of Lawrence Berkeley Laboratory.
*
* %sccs.include.redist.c%
*
* @(#)scsireg.h 7.5 (Berkeley) %G%
*/
/*
* HP 98265A SCSI Interface Hardware Description.
*/
struct scsidevice {
u_char p0, scsi_id;
#define ID_MASK 0x1f
#define SCSI_ID 0x07
#define ID_WORD_DMA 0x20
u_char p2, scsi_csr;
#define CSR_IE 0x80
#define CSR_IR 0x40
#define SCSI_IPL(csr) ((((csr)>>4)&3)+3)
#define CSR_DMA32 0x08
#define CSR_DMAIN 0x04
#define CSR_DE1 0x02
#define CSR_DE0 0x01
u_char p4, scsi_wrap;
#define WRAP_REQ 0x80
#define WRAP_ACK 0x40
#define WRAP_BSY 0x08
#define WRAP_MSG 0x04
#define WRAP_CD 0x02
#define WRAP_IO 0x01
u_char p6, scsi_hconf;
#define HCONF_TP 0x80
#define SCSI_SYNC_XFER(hconf) (((hconf)>>5)&3)
#define HCONF_SD 0x10
#define HCONF_PARITY 0x08
u_char p8[24];
u_char p32, scsi_bdid;
u_char p34, scsi_sctl;
#define SCTL_DISABLE 0x80
#define SCTL_CTRLRST 0x40
#define SCTL_DIAG 0x20
#define SCTL_ABRT_ENAB 0x10
#define SCTL_PARITY_ENAB 0x08
#define SCTL_SEL_ENAB 0x04
#define SCTL_RESEL_ENAB 0x02
#define SCTL_INTR_ENAB 0x01
u_char p36, scsi_scmd;
#define SCMD_RST 0x10
#define SCMD_ICPT_XFR 0x08
#define SCMD_PROG_XFR 0x04
#define SCMD_PAD 0x01 /* if initiator */
#define SCMD_PERR_STOP 0x01 /* if target */
/* command codes */
#define SCMD_BUS_REL 0x00
#define SCMD_SELECT 0x20
#define SCMD_RST_ATN 0x40
#define SCMD_SET_ATN 0x60
#define SCMD_XFR 0x80
#define SCMD_XFR_PAUSE 0xa0
#define SCMD_RST_ACK 0xc0
#define SCMD_SET_ACK 0xe0
u_char p38, scsi_tmod;
#define TMOD_SYNC 0x80
u_char p40, scsi_ints;
#define INTS_SEL 0x80
#define INTS_RESEL 0x40
#define INTS_DISCON 0x20
#define INTS_CMD_DONE 0x10
#define INTS_SRV_REQ 0x08
#define INTS_TIMEOUT 0x04
#define INTS_HARD_ERR 0x02
#define INTS_RST 0x01
u_char p42, scsi_psns;
#define PSNS_REQ 0x80
#define PSNS_ACK 0x40
#define PSNS_ATN 0x20
#define PSNS_SEL 0x10
#define PSNS_BSY 0x08
u_char p44, scsi_ssts;
#define SSTS_INITIATOR 0x80
#define SSTS_TARGET 0x40
#define SSTS_BUSY 0x20
#define SSTS_XFR 0x10
#define SSTS_ACTIVE (SSTS_INITIATOR|SSTS_XFR)
#define SSTS_RST 0x08
#define SSTS_TCZERO 0x04
#define SSTS_DREG_FULL 0x02
#define SSTS_DREG_EMPTY 0x01
u_char p46, scsi_serr;
#define SERR_SCSI_PAR 0x80
#define SERR_SPC_PAR 0x40
#define SERR_TC_PAR 0x08
#define SERR_PHASE_ERR 0x04
#define SERR_SHORT_XFR 0x02
#define SERR_OFFSET 0x01
u_char p48, scsi_pctl;
#define PCTL_BFINT_ENAB 0x80
u_char p50, scsi_mbc;
u_char p52, scsi_dreg;
u_char p54, scsi_temp;
u_char p56, scsi_tch;
u_char p58, scsi_tcm;
u_char p60, scsi_tcl;
u_char p62, scsi_exbf;
};
/* psns/pctl phase lines as bits */
#define PHASE_MSG 0x04
#define PHASE_CD 0x02 /* =1 if 'command' */
#define PHASE_IO 0x01 /* =1 if data inbound */
/* Phase lines as values */
#define PHASE 0x07 /* mask for psns/pctl phase */
#define DATA_OUT_PHASE 0x00
#define DATA_IN_PHASE 0x01
#define CMD_PHASE 0x02
#define STATUS_PHASE 0x03
#define BUS_FREE_PHASE 0x04
#define ARB_SEL_PHASE 0x05 /* Fuji chip combines arbitration with sel. */
#define MESG_OUT_PHASE 0x06
#define MESG_IN_PHASE 0x07
/* SCSI Messages */
#define MSG_CMD_COMPLETE 0x00
#define MSG_EXT_MESSAGE 0x01
#define MSG_SAVE_DATA_PTR 0x02
#define MSG_RESTORE_PTR 0x03
#define MSG_DISCONNECT 0x04
#define MSG_INIT_DETECT_ERROR 0x05
#define MSG_ABORT 0x06
#define MSG_REJECT 0x07
#define MSG_NOOP 0x08
#define MSG_PARITY_ERROR 0x09
#define MSG_BUS_DEVICE_RESET 0x0C
#define MSG_IDENTIFY 0x80
#define MSG_IDENTIFY_DR 0xc0 /* (disconnect/reconnect allowed) */
#define MSG_SYNC_REQ 0x01
/* SCSI Commands */
#define CMD_TEST_UNIT_READY 0x00
#define CMD_REQUEST_SENSE 0x03
#define CMD_INQUIRY 0x12
#define CMD_SEND_DIAGNOSTIC 0x1D
#define CMD_REWIND 0x01
#define CMD_REZERO 0x01
#define CMD_FORMAT_UNIT 0x04
#define CMD_READ_BLOCK_LIMITS 0x05
#define CMD_REASSIGN_BLOCKS 0x07
#define CMD_READ 0x08
#define CMD_WRITE 0x0A
#define CMD_WRITE_FILEMARK 0x10
#define CMD_SPACE 0x11
#define CMD_MODE_SELECT 0x15
#define CMD_RELEASE_UNIT 0x17
#define CMD_ERASE 0x19
#define CMD_MODE_SENSE 0x1A
#define CMD_LOADUNLOAD 0x1B
#define CMD_RECEIVE_DIAG 0x1C
#define CMD_SEND_DIAG 0x1D
#define CMD_P_A_MEDIA_REMOVAL 0x1E
#define CMD_READ_CAPACITY 0x25
#define CMD_READ_EXT 0x28
#define CMD_WRITE_EXT 0x2A
#define CMD_READ_DEFECT_DATA 0x37
#define SD_MANUFAC_DEFECTS 0x14000000
#define SD_GROWN_DEFECTS 0x0c000000
#define CMD_READ_BUFFER 0x3B
#define CMD_WRITE_BUFFER 0x3C
#define CMD_READ_FULL 0xF0
#define CMD_MEDIA_TEST 0xF1
#define CMD_ACCESS_LOG 0xF2
#define CMD_WRITE_FULL 0xFC
#define CMD_MANAGE_PRIMARY 0xFD
#define CMD_EXECUTE_DATA 0xFE
/* SCSI status bits */
#define STS_CHECKCOND 0x02 /* Check Condition (ie., read sense) */
#define STS_CONDMET 0x04 /* Condition Met (ie., search worked) */
#define STS_BUSY 0x08
#define STS_INTERMED 0x10 /* Intermediate status sent */
#define STS_EXT 0x80 /* Extended status valid */
/* command descriptor blocks */
struct scsi_cdb6 {
u_char cmd; /* command code */
u_char lun: 3, /* logical unit on ctlr */
lbah: 5; /* msb of read/write logical block addr */
u_char lbam; /* middle byte of l.b.a. */
u_char lbal; /* lsb of l.b.a. */
u_char len; /* transfer length */
u_char xtra;
};
struct scsi_cdb10 {
u_char cmd; /* command code */
u_char lun: 3, /* logical unit on ctlr */
: 4,
rel: 1; /* l.b.a. is relative addr if =1 */
u_char lbah; /* msb of read/write logical block addr */
u_char lbahm; /* high middle byte of l.b.a. */
u_char lbalm; /* low middle byte of l.b.a. */
u_char lbal; /* lsb of l.b.a. */
u_char reserved;
u_char lenh; /* msb transfer length */
u_char lenl; /* lsb transfer length */
u_char xtra;
};
/* basic sense data */
struct scsi_sense {
u_char valid: 1, /* l.b.a. is valid */
class: 3,
code: 4;
u_char vu: 4, /* vendor unique */
lbah: 4;
u_char lbam;
u_char lbal;
};
struct scsi_xsense {
u_char valid: 1, /* l.b.a. is valid */
class: 3,
code: 4;
u_char segment;
u_char filemark: 1,
eom: 1,
ili: 1, /* illegal length indicator */
rsvd: 1,
key: 4;
u_char info1;
u_char info2;
u_char info3;
u_char info4;
u_char len; /* additional sense length */
};
/* inquiry data */
struct scsi_inquiry {
u_char type;
u_char qual;
u_char version;
u_char rsvd;
u_char len;
char class[3];
char vendor_id[8];
char product_id[16];
char rev[4];
};
struct scsi_format_parms { /* physical BFI format */
u_short reserved;
u_short list_len;
struct defect {
unsigned cyl : 24;
unsigned head : 8;
long bytes_from_index;
} defect[127];
} format_parms;
struct scsi_reassign_parms {
u_short reserved;
u_short list_len; /* length in bytes of defects only */
struct new_defect {
unsigned lba; /* logical block address */
} new_defect[2];
} reassign_parms;
struct scsi_modesel_hdr {
u_char rsvd1;
u_char media_type;
u_char rsvd2;
u_char block_desc_len;
u_int density : 8;
u_int number_blocks :24;
u_int rsvd3 : 8;
u_int block_length :24;
};
struct scsi_modesense_hdr {
u_char len;
u_char media_type;
u_char wp : 1;
u_char rsvd1 : 7;
u_char block_desc_len;
u_int density : 8;
u_int number_blocks :24;
u_int rsvd2 : 8;
u_int block_length :24;
};
/*
* Mode Select / Mode sense "pages"
*/
/*
* Page One - Error Recovery Parameters
*/
struct scsi_err_recovery {
u_char page_savable : 1; /* save parameters */
u_char reserved : 1;
u_char page_code : 6; /* = 0x01 */
u_char page_length; /* = 6 */
u_char awre : 1; /* auto write realloc enabled */
u_char arre : 1; /* auto read realloc enabled */
u_char tb : 1; /* transfer block */
u_char rc : 1; /* read continuous */
u_char eec : 1; /* enable early correction */
u_char per : 1; /* post error */
u_char dte : 1; /* disable transfer on error */
u_char dcr : 1; /* disable correction */
u_char retry_count;
u_char correction_span;
u_char head_offset_count;
u_char strobe_offset_count;
u_char recovery_time_limit;
};
/*
* Page Two - Disconnect / Reconnect Control Parameters
*/
struct scsi_disco_reco {
u_char page_savable : 1; /* save parameters */
u_char rsvd : 1;
u_char page_code : 6; /* = 0x02 */
u_char page_length; /* = 10 */
u_char buffer_full_ratio; /* write, how full before reconnect? */
u_char buffer_empty_ratio; /* read, how full before reconnect? */
u_short bus_inactivity_limit; /* how much bus time for busy */
u_short disconnect_time_limit; /* min to remain disconnected */
u_short connect_time_limit; /* min to remain connected */
u_short reserved_1;
};
/*
* Page Three - Direct Access Device Format Parameters
*/
struct scsi_format {
u_char page_savable : 1; /* save parameters */
u_char rsvd : 1;
u_char page_code : 6; /* = 0x03 */
u_char page_length; /* = 22 */
u_short tracks_per_zone; /* Handling of Defects Fields */
u_short alt_sect_zone;
u_short alt_tracks_zone;
u_short alt_tracks_vol;
u_short sect_track; /* Track Format Field */
u_short data_sect; /* Sector Format Fields */
u_short interleave;
u_short track_skew_factor;
u_short cyl_skew_factor;
u_char ssec : 1; /* Drive Type Field */
u_char hsec : 1;
u_char rmb : 1;
u_char surf : 1;
u_char ins : 1;
u_char reserved_1 : 3;
u_char reserved_2;
u_char reserved_3;
u_char reserved_4;
};
/*
* Page Four - Rigid Disk Drive Geometry Parameters
*/
struct scsi_geometry {
u_char page_savable : 1; /* save parameters */
u_char rsvd : 1;
u_char page_code : 6; /* = 0x04 */
u_char page_length; /* = 18 */
u_char cyl_ub; /* number of cylinders */
u_char cyl_mb;
u_char cyl_lb;
u_char heads; /* number of heads */
u_char precomp_cyl_ub; /* cylinder to start precomp */
u_char precomp_cyl_mb;
u_char precomp_cyl_lb;
u_char current_cyl_ub; /* cyl to start reduced current */
u_char current_cyl_mb;
u_char current_cyl_lb;
u_short step_rate; /* drive step rate */
u_char landing_cyl_ub; /* landing zone cylinder */
u_char landing_cyl_mb;
u_char landing_cyl_lb;
u_char reserved_1;
u_char reserved_2;
u_char reserved_3;
};
/*
* Page 0x38 - Cache Control Parameters
*/
struct scsi_cache {
u_char page_savable : 1; /* save parameters */
u_char rsvd : 1;
u_char page_code : 6; /* = 0x38 */
u_char page_length; /* = 14 */
u_char rsvd_1 : 1;
u_char wie : 1; /* write index enable */
u_char rsvd_2 : 1;
u_char ce : 1; /* cache enable */
u_char table_size : 4;
u_char prefetch_threshold;
u_char maximum_threshold;
u_char maximumprefetch_multiplier;
u_char minimum_threshold;
u_char minimum_prefetch_multiplier;
u_char reserved[8];
};
/*
* Control for SCSI "format" mode.
*
* "Format" mode allows a privileged process to issue direct SCSI
* commands to a drive (it is intended primarily to allow on-line
* formatting). SDIOCSFORMAT with a non-zero arg will put the drive
* into format mode; a zero arg will take it out. When in format
* mode, only the process that issued the SDIOCFORMAT can read or
* write the drive.
*
* In format mode, process is expected to
* - do SDIOCSCSICOMMAND to supply cdb for next SCSI op
* - do read or write as appropriate for cdb
* - if i/o error, optionally do SDIOCSENSE to get completion
* status and sense data from last scsi operation.
*/
struct scsi_fmt_cdb {
int len; /* cdb length (in bytes) */
u_char cdb[28]; /* cdb to use on next read/write */
};
struct scsi_fmt_sense {
u_int status; /* completion status of last op */
u_char sense[28]; /* sense data (if any) from last op */
};
#define SDIOCSFORMAT _IOW('S', 0x1, int)
#define SDIOCGFORMAT _IOR('S', 0x2, int)
#define SDIOCSCSICOMMAND _IOW('S', 0x3, struct scsi_fmt_cdb)
#define SDIOCSENSE _IOR('S', 0x4, struct scsi_fmt_sense)
Continuous source code history from original PDP-7 UNIX to FreeBSD 2, the first fully unencumbered FreeBSD release.