# Copyright (c) 1990 The Regents of the University of California.
# Written and contributed by W. Jolitz 12/90
# Redistribution and use in source and binary forms are permitted provided
# that: (1) source distributions retain this entire copyright notice and
# comment, and (2) distributions including binaries display the following
# acknowledgement: ``This product includes software developed by the
# University of California, Berkeley and its contributors'' in the
# documentation or other materials provided with the distribution and in
# all advertising materials mentioning features or use of this software.
# Neither the name of the University nor the names of its contributors may
# be used to endorse or promote products derived from this software without
# specific prior written permission.
# THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED
# WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF
# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
# @(#)MAKEDEV 5.2 (Berkeley) 6/22/90
# Device "make" file. Valid arguments:
# all makes all known devices, standard number of units (or close)
# local configuration specific devices
# wt* QIC-interfaced (e.g. not SCSI) 3M cartridge tape
# st* "NEW type scsi tapes" (old driver uses the
# block devices of the disks to get access)
# wd* "winchester" disk drives (ST506,IDE,ESDI,RLL,...)
# fd* "floppy" disk drives (3 1/2", 5 1/4")
# pc* devices for stock pccons
# vty* virtual console devices for syscons/pcvt/codrv
# mse* Logitech and ATI Inport bus mouse
# com* standard PC COM ports (really makes tty* entries for com)
# sio* fast interrupt PC COM ports (really makes tty* entries for sio)
# tty* alias for sio ports, this is what the system really wants
# pty* set of 16 master and slave pseudo terminals
# vty* virtual terminals using syscons/pcvt/codrv console
# Special purpose devices:
# tw* xten power controller
# snd* various sound cards
# $Id: MAKEDEV,v 1.13 1993/10/23 22:24:35 jkh Exp $
PATH
=/sbin
:/bin
/:/usr
/bin
:/usr
/sbin
:
sh MAKEDEV std
# standard
sh MAKEDEV wd0 wd1 fd0 fd1 wt0 sd0 sd1 st0 cd0
# bdev
sh MAKEDEV pty0 tty0 tty1 tty2 tty3 pc0 lpt0 lpt1 lpt2
# cdev
sh MAKEDEV ch0 tw0 bpf0 dcf0 lpa0 lpa1 lpa2
# cdev
sh MAKEDEV speaker mse0 sio0 sio1 sio2 sio3
# cdev
# NOTE: co0 and vty04 are not done by a "sh MAKEDEV all"
# these are for codrv and interfere with other devices! - rgrimes
rm -f console drum mem kmem null zero io tty klog stdin stdout stderr
mknod console c
0 0; chmod 600 console
; chown root.wheel console
mknod drum c
4 0; chmod 640 drum
; chown root.kmem drum
mknod kmem c
2 1; chmod 640 kmem
; chown root.kmem kmem
mknod mem c
2 0; chmod 640 mem
; chown root.kmem mem
mknod null c
2 2; chmod 666 null
; chown root.wheel null
mknod zero c
2 12; chmod 666 zero
; chown root.wheel zero
mknod io c
2 14; chmod 640 io
; chown root.kmem io
mknod tty c
1 0; chmod 666 tty
; chown root.wheel tty
mknod klog c
7 0; chmod 600 klog
; chown root.wheel klog
mknod stdin c
22 0; chmod 666 stdin
; chown root.wheel stdin
mknod stdout c
22 1; chmod 666 stdout
; chown root.wheel stdout
mknod stderr c
22 2; chmod 666 stderr
; chown root.wheel stderr
mkdir fd
> /dev
/null
2>&1
(cd fd
&& eval `echo "" | awk ' BEGIN { \
for (i = 0; i < 64; i++) \
printf("mknod %d c 22 %d;", i, i)}'`)
# Create device files for new Archive/Wangtek QIC-02 tape driver (vak)
umask 2 ; u
=`expr $i : '..\(.*\)'`
if [ x
$u = x
]; then u
=0; fi
rm -f rwt
$u nrwt
$u rwt
${u}a nrwt${u}a rwt${u}b nrwt${u}b
mknod rwt
${u} c
10 `expr 0 + $u` # 150 megabytes
mknod nrwt
${u} c
10 `expr 4 + $u`
mknod rwt
${u}a c
10 `expr 8 + $u` # 120 megabytes
mknod nrwt
${u}a c
10 `expr 12 + $u`
mknod rwt
${u}b c
10 `expr 16 + $u` # 60 megabytes
mknod nrwt
${u}b c
10 `expr 20 + $u`
chown root.operator rwt
$u nrwt
$u rwt
${u}a nrwt${u}a rwt${u}b nrwt${u}b
umask 2 ; unit
=`expr $i : '..\(.*\)'`
fd
*) name
=fd
; blk
=2; chr
=9;;
sd
*) name
=sd
; blk
=4; chr
=13;;
wd
*) name
=wd
; blk
=0; chr
=3;;
rm -f $name$unit? r
$name$unit?
mknod
${name}${unit}a b
$blk `expr $unit '*' 8 + 0`
mknod
${name}${unit}b b
$blk `expr $unit '*' 8 + 1`
mknod
${name}${unit}c b
$blk `expr $unit '*' 8 + 2`
mknod
${name}${unit}d b
$blk `expr $unit '*' 8 + 3`
mknod
${name}${unit}e b
$blk `expr $unit '*' 8 + 4`
mknod
${name}${unit}f b
$blk `expr $unit '*' 8 + 5`
mknod
${name}${unit}g b
$blk `expr $unit '*' 8 + 6`
mknod
${name}${unit}h b
$blk `expr $unit '*' 8 + 7`
mknod r
${name}${unit}a c
$chr `expr $unit '*' 8 + 0`
mknod r
${name}${unit}b c
$chr `expr $unit '*' 8 + 1`
mknod r
${name}${unit}c c
$chr `expr $unit '*' 8 + 2`
mknod r
${name}${unit}d c
$chr `expr $unit '*' 8 + 3`
mknod r
${name}${unit}e c
$chr `expr $unit '*' 8 + 4`
mknod r
${name}${unit}f c
$chr `expr $unit '*' 8 + 5`
mknod r
${name}${unit}g c
$chr `expr $unit '*' 8 + 6`
mknod r
${name}${unit}h c
$chr `expr $unit '*' 8 + 7`
chgrp operator
${name}${unit}[a-h] r${name}${unit}[a-h
]
chmod 640 ${name}${unit}[a-h] r${name}${unit}[a-h
]
echo bad unit
for disk
in: $i
unit
=`expr $i : '...\(.*\)'`
mknod tty0
$unit c
8 $unit
chown
uucp.wheel tty0
$unit
class
=`expr $i : 'pty\(.*\)'`
# Note that telnetd, rlogind, and xterm (at least) only look at p-s.
*) echo bad unit
for pty
in: $i;;
eval `echo $offset $name | awk ' { b=$1; n=$2 } END {
printf("rm -f tty%s%x; mknod tty%s%x c 5 %d; \
rm -f pty%s%x; mknod pty%s%x c 6 %d; ", \
n, i, n, i, b+i, n, i, n, i, b+i); }'`
mv ttyqf ttyv0
; mv ptyqf ptyv0
umask 2 ; unit
=`expr $i : '..\(.*\)'`
rm -f r
$name$unit nr
$name$unit er
$name$unit enr
$name$unit
rm -f hr
$name$unit hnr
$name$unit her
$name$unit henr
$name$unit
rm -f mr
$name$unit mnr
$name$unit mer
$name$unit menr
$name$unit
rm -f lr
$name$unit lnr
$name$unit ler
$name$unit lenr
$name$unit
mknod r
${name}${unit} c
$chr `expr $unit '*' 16 + 0`
mknod nr
${name}${unit} c
$chr `expr $unit '*' 16 + 1`
mknod er
${name}${unit} c
$chr `expr $unit '*' 16 + 2`
mknod hr
${name}${unit} c
$chr `expr $unit '*' 16 + 4`
mknod hnr
${name}${unit} c
$chr `expr $unit '*' 16 + 5`
mknod her
${name}${unit} c
$chr `expr $unit '*' 16 + 6`
mknod mr
${name}${unit} c
$chr `expr $unit '*' 16 + 8`
mknod mnr
${name}${unit} c
$chr `expr $unit '*' 16 + 9`
mknod mer
${name}${unit} c
$chr `expr $unit '*' 16 + 10`
mknod lr
${name}${unit} c
$chr `expr $unit '*' 16 + 12`
mknod lnr
${name}${unit} c
$chr `expr $unit '*' 16 + 13`
mknod ler
${name}${unit} c
$chr `expr $unit '*' 16 + 14`
chgrp operator r
${name}${unit} nr${name}${unit} \
chgrp operator hr
${name}${unit} hnr${name}${unit} \
chgrp operator mr
${name}${unit} mnr${name}${unit} \
chgrp operator lr
${name}${unit} lnr${name}${unit} \
chmod 640 r
${name}${unit} nr${name}${unit} \
chmod 640 hr
${name}${unit} hnr${name}${unit} \
chmod 640 mr
${name}${unit} mnr${name}${unit} \
chmod 640 lr
${name}${unit} lnr${name}${unit} \
echo bad unit
for tape
in: $i
umask 2 ; unit
=`expr $i : '..\(.*\)'`
mknod
${name}${unit} c
$chr `expr $unit '*' 16 + 0`
chgrp operator
${name}${unit}
echo bad unit
for media changer
in: $i
umask 2 ; unit
=`expr $i : '..\(.*\)'`
cd*) name
=cd; blk
=6; chr
=15;;
rm -f $name$unit? r
$name$unit?
mknod
${name}${unit}a b
$blk `expr $unit '*' 8 + 0`
mknod
${name}${unit}d b
$blk `expr $unit '*' 8 + 3`
mknod r
${name}${unit}a c
$chr `expr $unit '*' 8 + 0`
mknod r
${name}${unit}d c
$chr `expr $unit '*' 8 + 3`
chgrp operator
${name}${unit}[a-h] r${name}${unit}[a-h
]
chmod 640 ${name}${unit}[a-h] r${name}${unit}[a-h
]
echo bad unit
for disk
in: $i
unit
=`expr $i : 'lpt\(.*\)'`
mknod lpt
$unit c
16 $unit
chown root.wheel lpt
$unit
unit
=`expr $i : 'tw\(.*\)'`
# hv 22-apr-93 use this to create the necessary video device for
rm -f ${name} kbd kbdco vgaco ttyv
[0-9][0-9]
mknod
${name} c ${chr} ${minor}
# Use this to create virtual consoles for syscons, pcvt or codrv
# use as MAKEDEV vtyNN to create NN entries
units
=`expr $i : 'vty\(.*\)'`
eval `echo ${chr} ${units} | awk ' { c=$1; n=$2 } END {
printf("rm -f ttyv%01x; mknod ttyv%01x c %d %d;", \
unit
=`expr $i : 'bpf\(.*\)'`
mknod bpf
$unit c
23 $unit
chown root.wheel bpf
$unit
unit
=`expr $i : 'dcf\(.*\)'`
mknod dcf
$unit c
24 $unit
chown root.wheel dcf
$unit
unit
=`expr $i : 'lpa\(.*\)'`
rm -f lpa
$unit lpa
${unit}p
mknod lpa
${unit} c
$chr `expr $unit + 0`
mknod lpa
${unit}p c
$chr `expr $unit + 32`
chown root.wheel lpa
${unit} lpa
${unit}p
unit
=`expr $i : '...\(.*\)'`
mknod tty0
$unit c
28 $unit
chown
uucp.wheel tty0
$unit
unit
=`expr $i : 'mse\(.*\)'`
mknod mse
$unit c
$chr `expr $unit '*' 2 + 1` # non-blocking for X11
chown root.wheel mse
$unit
unit
=`expr $i : 'psm\(.*\)'`
mknod psm
$unit c
$chr `expr $unit '*' 2 + 1` # non-blocking for X11
chown root.wheel psm
$unit
name
=`expr $i : 'mouse-\(.*\)'`
$0 $name # make the appropriate device
rm -f /dev
/mixer
# Mixer [ Control ]
mknod
/dev
/mixer c
$chr 0
rm -f /dev
/sequencer
# Sequencer [ FM Synth and MIDI output ]
mknod
/dev
/sequencer c
$chr 1
rm -f /dev
/midi
# Midi input [ Not implemented ]
rm -f /dev
/dsp
# DSP [ Digitized voice ]
rm -f /dev
/audio
# SPARC audio [ Not fully implemented ]
mknod
/dev
/audio c
$chr 4
rm -f /dev
/dsp16
# DSP16 [ Same as /dev/dsp, except 16 bits ]
mknod
/dev
/dsp16 c
$chr 5
rm -f /dev
/sndstat
# Status Device [ Debugging interface ]
mknod
/dev
/sndstat c
$chr 6
rm -f /dev
/pro_midi
# PRO_MIDI [PAS midi input and output]
mknod
/dev
/pro_midi c
$chr 15
rm -f /dev
/dsp1
# DSP 1 [ SB emulation of PAS16 or 2nd audio ]
mknod
/dev
/dsp1 c
$chr 19
rm -f /dev
/audio1
# Sparc Audio 1 [ SB emulation of PAS16 or 2nd audio ]
mknod
/dev
/audio1 c
$chr 20