386BSD 0.1 development

Work on file usr/othersrc/public/ghostscript-2.4.1/vms-cc.mak
Work on file usr/othersrc/public/ghostscript-2.4.1/vms-gcc.mak

Co-Authored-By: Lynne Greer Jolitz <ljolitz@cardio.ucsf.edu>
Synthesized-from: 386BSD-0.1

diff --git a/usr/othersrc/public/ghostscript-2.4.1/vms-cc.mak b/usr/othersrc/public/ghostscript-2.4.1/vms-cc.mak
new file mode 100644 (file)
index 0000000..14a1f46
--- /dev/null
+++ b/usr/othersrc/public/ghostscript-2.4.1/vms-cc.mak
@@ -0,0 +1,269 @@
+$ !    Copyright (C) 1989, 1992 Aladdin Enterprises.  All rights reserved.
+$ !    Distributed by Free Software Foundation, Inc.
+$ !
+$ ! This file is part of Ghostscript.
+$ !
+$ ! Ghostscript is distributed in the hope that it will be useful, but
+$ ! WITHOUT ANY WARRANTY.  No author or distributor accepts responsibility
+$ ! to anyone for the consequences of using it or for whether it serves any
+$ ! particular purpose or works at all, unless he says so in writing.  Refer
+$ ! to the Ghostscript General Public License for full details.
+$ !
+$ ! Everyone is granted permission to copy, modify and redistribute
+$ ! Ghostscript, but only under the conditions described in the Ghostscript
+$ ! General Public License.  A copy of this license is supposed to have been
+$ ! given to you along with Ghostscript so you can know your rights and
+$ ! responsibilities.  It should be in a file named COPYING.  Among other
+$ ! things, the copyright notice and this notice must be preserved on all
+$ ! copies.
+$ !
+$ !
+$ ! "makefile" for Ghostscript, VMS / VMS C / DECwindows (X11) configuration.
+$ !
+$ !
+$ ! Execute this command file while in the GhostScript directory!
+$ !
+$ !
+$ ! To build a debugging configuration, issue the command:
+$ !
+$ !          $ @VMS-CC.MAK DEBUG
+$ !
+$ ! Do not  abbreviate "DEBUG".  To specify an alternate directory for
+$ ! GS_LIB_DEFAULT, issue the command:
+$ !
+$ !          $ @VMS-CC.MAK directory
+$ !
+$ ! with "directory" a fully qualified directory name.  "directory" cannot
+$ ! be DEBUG (otherwise it will be confused with the DEBUG switch).  Both
+$ ! the DEBUG switch and a directory name may be specified on the same
+$ ! command line and in either order.
+$ !
+$ CDEF = ""
+$ LDEF = ""
+$ !
+$ GS_INIT = "GS_INIT.PS"
+$ GS_LIB_DEFAULT = F$ENVIRONMENT("DEFAULT")
+$ IF P1 .NES. "" .AND. P1 .NES. "DEBUG" THEN GS_LIB_DEFAULT = P1
+$ IF P2 .NES. "" .AND. P2 .NES. "DEBUG" THEN GS_LIB_DEFAULT = P2
+$ !
+$ IF P1 .NES. "DEBUG" .AND. P2 .NES. "DEBUG" THEN GOTO NODEBUG
+$ CDEF = "/DEFINE=(""DEBUG"")/NOOPTIMIZE/DEBUG"
+$ LDEF = "/DEBUG"
+$ !
+$ NODEBUG:
+$ !
+$ ! Give ourself a healthy search list for C include files
+$ !
+$ DEFINE C$INCLUDE 'F$ENVIRONMENT("DEFAULT"),DECW$INCLUDE,SYS$LIBRARY
+$ DEFINE VAXC$INCLUDE C$INCLUDE
+$ DEFINE SYS SYS$LIBRARY
+$ !
+$ !
+$ ! Build the ANSI C to Kernighan & Ritchie filter
+$ !
+$ CC/NOLIST/OBJECT=ANSI2KNR.OBJ ANSI2KNR.C
+$ LINK/NOMAP/EXE=ANSI2KNR.EXE ANSI2KNR,SYS$INPUT/OPT
+SYS$SHARE:DECW$XLIBSHR/SHARE
+$ DELETE ANSI2KNR.OBJ.*
+$ !
+$ ! Now define an ansi2knr symbol
+$ !
+$ ANSI2KNR = "$" + F$ENVIRONMENT("DEFAULT") + "ANSI2KNR.EXE"
+$ !
+$ !
+$ ! Compile genarch.c and then run it to create the arch.h header file
+$ !
+$ CC/NOLIST/OBJECT=GENARCH.OBJ GENARCH.C
+$ LINK/NOMAP/EXE=GENARCH.EXE GENARCH,SYS$INPUT/OPT
+SYS$SHARE:VAXCRTL/SHARE
+$ GENARCH = "$" + F$ENVIRONMENT("DEFAULT") + "GENARCH.EXE"
+$ GENARCH ARCH.H
+$ DELETE GENARCH.EXE.*,GENARCH.OBJ.*
+$ PURGE ARCH.H
+$ !
+$ !
+$ ! Create a minimal gconfig.h
+$ !
+$ CREATE GCONFIG.H
+device_(gs_x11_device)
+$ !
+$ ! Create an empty object library
+$ !
+$ LIBRARY/CREATE GS.OLB
+$ !
+$ !
+$ ! Create a list of modules to compile and store in the object library
+$ !
+$ CREATE MODULES.LIS
+GDEVMEM1
+GDEVMEM2
+GDEVMEM3
+GP_VMS
+GSCHAR
+GSCHAR0
+GSCOLOR
+GSCOORD
+GSDEVICE
+GSDPS1
+GSFILE
+GSFONT
+GSIM2OUT
+GSIMAGE
+GSLINE
+GSMATRIX
+GSMISC
+GSPAINT
+GSPATH
+GSPATH2
+GSSTATE
+GSTDEV
+GSTYPE1
+GSUTIL
+GXCACHE
+GXCLIST
+GXCOLOR
+GXCPATH
+GXDITHER
+GXDRAW
+GXFILL
+GXHT
+GXPATH
+GXPATH2
+GXSTROKE
+IALLOC
+IBNUM
+IBSCAN
+ICCFONT
+IDEBUG
+IDICT
+IINIT
+INAME
+INTERP
+ISAVE
+ISCAN
+IUTIL
+SFILTER
+SFILTER2
+STREAM
+ZARITH
+ZARRAY
+ZBSEQ
+ZCHAR
+ZCOLOR
+ZCONTROL
+ZDEVICE
+ZDICT
+ZDPS1
+ZFILE
+ZFILEIO
+ZFILTER
+ZFILTER2
+ZFONT
+ZFONT0
+ZFONT1
+ZFONT2
+ZGENERIC
+ZGSTATE
+ZHT
+ZMATH
+ZMATRIX
+ZMISC
+ZPACKED
+ZPAINT
+ZPATH
+ZPATH2
+ZPROPS
+ZRELBIT
+ZSTACK
+ZSTRING
+ZTYPE
+ZUPATH
+ZVMEM
+$ !
+$ !
+$ ! NOW COMPILE AWAY!
+$ !
+$ OPEN/READ MODULE_LIST MODULES.LIS
+$ !
+$ COMPILE_LOOP:
+$ READ/END=END_COMPILE MODULE_LIST MODULE
+$ ANSI2KNR 'MODULE'.C 'MODULE'.CC
+$ CC'CDEF/NOLIST/OBJECT='MODULE'.OBJ 'MODULE'.CC
+$ LIBRARY/INSERT GS.OLB 'MODULE'.OBJ
+$ DELETE 'MODULE'.OBJ.*
+$ IF CDEF .EQS. "" THEN DELETE 'MODULE'.CC.*
+$ GOTO COMPILE_LOOP
+$ !
+$ END_COMPILE:
+$ CLOSE MODULE_LIST
+$ DELETE MODULES.LIS.*
+$ !
+$ !
+$ ! Is the DECwindows environment about?  Must be installed in order to
+$ ! build the executable programs gs.exe, gt.exe, and xlib.exe.
+$ !
+$ IF F$SEARCH("SYS$SHARE:DECW$XLIBSHR.EXE") .NES. "" THEN GOTO CHECK2
+$ WRITE SYS$OUTPUT "DECwindows user environment not installed;"
+$ WRITE SYS$OUTPUT "unable to build executable programs."
+$ GOTO DONE
+$ !
+$ CHECK2:
+$ IF F$TRNLNM("DECW$INCLUDE") .NES. "" THEN GOTO BUILD_EXES
+$ WRITE SYS$OUTPUT "You must invoke @DECW$STARTUP before using this"
+$ WRITE SYS$OUTPUT "command procedure to build the executable programs."
+$ GOTO DONE
+$ !
+$ ! Build the executables
+$ !
+$ BUILD_EXES:
+$ !
+$ DEFINE X11 DECW$INCLUDE
+$ !
+$ ANSI2KNR GCONFIG.C GCONFIG.CC
+$ LIBDEF = """GS_LIB_DEFAULT=""""" + ''GS_LIB_DEFAULT' + """"""""
+$ INIDEF = """GS_INIT=""""" + ''GS_INIT' + """"""""
+$ CC'CDEF/NOLIST/DEFINE=('LIBDEF','INIDEF')/OBJECT=GCONFIG.OBJ GCONFIG.CC
+$ !
+$ ANSI2KNR GDEVXINI.C GDEVXINI.CC
+$ CC'CDEF/NOLIST/OBJECT=GDEVXINI.OBJ GDEVXINI.CC
+$ !
+$ ANSI2KNR GDEVX.C GDEVX.CC
+$ CC'CDEF/NOLIST/OBJECT=GDEVX.OBJ GDEVX.CC
+$ !
+$ ANSI2KNR GSMAIN.C GSMAIN.CC
+$ CC'CDEF/NOLIST/OBJECT=GSMAIN.OBJ GSMAIN.CC
+$ !
+$ ANSI2KNR UTRACE.C UTRACE.CC
+$ CC'CDEF/NOLIST/OBJECT=UTRACE.OBJ UTRACE.CC
+$ !
+$ ! 
+$ ! GSMAIN and UTRACE are tossed into the GT link so that when a
+$ ! debugging configuration is built, the gs_log_error and gs_exit
+$ ! routines will be defined.
+$ !
+$ ANSI2KNR GS.C GS.CC
+$ CC'CDEF/NOLIST/OBJECT=GS.OBJ GS.CC
+$ LINK'LDEF/NOMAP/EXE=GS.EXE GS,GSMAIN,UTRACE,GDEVX,GDEVXINI,GCONFIG,-
+  GS/LIB/INCLUDE=(GDEVMEM1,GDEVMEM2,GDEVMEM3,GXCLIST,-
+  ZARITH,ZARRAY,ZBSEQ,ZCHAR,ZCOLOR,ZCONTROL,ZDEVICE,ZDPS1,-
+  ZDICT,ZFILE,ZFILEIO,ZFILTER,ZFILTER2,ZFONT,ZFONT0,ZFONT1,ZFONT2,-
+  ZGENERIC,ZGSTATE,ZHT,ZMATH,ZMATRIX,ZMISC,ZPACKED,ZPAINT,ZPATH,ZPATH2,-
+  ZPROPS,ZRELBIT,ZSTACK,ZSTRING,ZTYPE,ZUPATH,ZVMEM),SYS$INPUT/OPT
+SYS$SHARE:DECW$DWTLIBSHR/SHARE
+$ !
+$ DELETE GDEVX.OBJ.*,GDEVXINI.OBJ.*,GSMAIN.OBJ.*,UTRACE.OBJ.*,GS.OBJ.*,-
+         GCONFIG.OBJ.*
+$ IF CDEF .EQS. "" THEN -
+  DELETE GDEVX.CC.*,GDEVXINI.CC.*,GSMAIN.CC.*,UTRACE.CC.*,GS.CC.*,GCONFIG.CC.*
+$ !
+$ DELETE ANSI2KNR.EXE.*
+$ !
+$ DEASSIGN X11
+$ !
+$ DONE:
+$ !
+$ DEASSIGN C$INCLUDE
+$ DEASSIGN VAXC$INCLUDE
+$ DEASSIGN SYS
+$ !
+$ ! ALL DONE

diff --git a/usr/othersrc/public/ghostscript-2.4.1/vms-gcc.mak b/usr/othersrc/public/ghostscript-2.4.1/vms-gcc.mak
new file mode 100644 (file)
index 0000000..45fff6f
--- /dev/null
+++ b/usr/othersrc/public/ghostscript-2.4.1/vms-gcc.mak
@@ -0,0 +1,236 @@
+$ !    Copyright (C) 1989, 1992 Aladdin Enterprises.  All rights reserved.
+$ !    Distributed by Free Software Foundation, Inc.
+$ !
+$ ! This file is part of Ghostscript.
+$ !
+$ ! Ghostscript is distributed in the hope that it will be useful, but
+$ ! WITHOUT ANY WARRANTY.  No author or distributor accepts responsibility
+$ ! to anyone for the consequences of using it or for whether it serves any
+$ ! particular purpose or works at all, unless he says so in writing.  Refer
+$ ! to the Ghostscript General Public License for full details.
+$ !
+$ ! Everyone is granted permission to copy, modify and redistribute
+$ ! Ghostscript, but only under the conditions described in the Ghostscript
+$ ! General Public License.  A copy of this license is supposed to have been
+$ ! given to you along with Ghostscript so you can know your rights and
+$ ! responsibilities.  It should be in a file named COPYING.  Among other
+$ ! things, the copyright notice and this notice must be preserved on all
+$ ! copies.
+$ !
+$ !
+$ ! "makefile" for Ghostscript, VMS / GNU C / DECwindows (X11) configuration.
+$ !
+$ !
+$ ! Execute this command file while in the GhostScript directory!
+$ !
+$ !
+$ ! To build a debugging configuration, issue the command:
+$ !
+$ !          $ @VMS-CC.MAK DEBUG
+$ !
+$ ! Do not  abbreviate "DEBUG".  To specify an alternate directory for
+$ ! GS_LIB_DEFAULT, issue the command:
+$ !
+$ !          $ @VMS-CC.MAK directory
+$ !
+$ ! with "directory" a fully qualified directory name.  "directory" cannot
+$ ! be DEBUG (otherwise it will be confused with the DEBUG switch).  Both
+$ ! the DEBUG switch and a directory name may be specified on the same
+$ ! command line and in either order.
+$ !
+$ !
+$ CDEF = ""
+$ LDEF = ""
+$ !
+$ GS_INIT = "GS_INIT.PS"
+$ GS_LIB_DEFAULT = F$ENVIRONMENT("DEFAULT")
+$ IF P1 .NES. "" .AND. P1 .NES. "DEBUG" THEN GS_LIB_DEFAULT = P1
+$ IF P2 .NES. "" .AND. P2 .NES. "DEBUG" THEN GS_LIB_DEFAULT = P2
+$ !
+$ IF P1 .NES. "DEBUG" .AND. P2 .NES. "DEBUG" THEN GOTO NODEBUG
+$ CDEF = "/DEFINE=(""DEBUG"")/NOOPTIMIZE/DEBUG"
+$ LDEF = "/DEBUG"
+$ !
+$ NODEBUG:
+$ !
+$ ! Is GNU C about and defined?
+$ !
+$ IF F$TRNLNM("GNU_CC") .NES. "" THEN GOTO GNU_CC_OKAY
+$ WRITE SYS$OUTPUT "GNU_CC logical is undefined.  You must execute the command"
+$ WRITE SYS$OUTPUT "file GCC_INSTALL.COM in the GNU CC directory before using"
+$ WRITE SYS$OUTPUT "this command file."
+$ EXIT
+$ !
+$ !
+$ GNU_CC_OKAY:
+$ SET COMMAND GNU_CC:[000000]GCC.CLD
+$ !
+$ !
+$ ! Compile genarch.c and then run it to create the arch.h header file
+$ !
+$ GCC/NOLIST/OBJECT=GENARCH.OBJ GENARCH.C
+$ LINK/NOMAP/EXE=GENARCH.EXE GENARCH,GNU_CC:[000000]GCCLIB/LIB,SYS$INPUT/OPT
+SYS$SHARE:VAXCRTL/SHARE
+$ GENARCH = "$" + F$ENVIRONMENT("DEFAULT") + "GENARCH.EXE"
+$ GENARCH ARCH.H
+$ DELETE GENARCH.EXE.*,GENARCH.OBJ.*
+$ PURGE ARCH.H
+$ !
+$ !
+$ ! Create a minimal gconfig.h
+$ !
+$ CREATE GCONFIG.H
+device_(gs_x11_device)
+$ !
+$ !
+$ ! Create an empty object library
+$ !
+$ LIBRARY/CREATE GS.OLB
+$ !
+$ !
+$ ! Create a list of modules to compile and store in the object library
+$ !
+$ CREATE MODULES.LIS
+GDEVMEM1
+GDEVMEM2
+GDEVMEM3
+GP_VMS
+GSCHAR
+GSCHAR0
+GSCOLOR
+GSCOORD
+GSDEVICE
+GSDPS1
+GSFILE
+GSFONT
+GSIM2OUT
+GSIMAGE
+GSLINE
+GSMATRIX
+GSMISC
+GSPAINT
+GSPATH
+GSPATH2
+GSSTATE
+GSTDEV
+GSTYPE1
+GSUTIL
+GXCACHE
+GXCLIST
+GXCOLOR
+GXCPATH
+GXDITHER
+GXDRAW
+GXFILL
+GXHT
+GXPATH
+GXPATH2
+GXSTROKE
+IALLOC
+IBNUM
+IBSCAN
+ICCFONT
+IDEBUG
+IDICT
+IINIT
+INAME
+INTERP
+ISAVE
+ISCAN
+IUTIL
+SFILTER
+SFILTER2
+STREAM
+ZARITH
+ZARRAY
+ZBSEQ
+ZCHAR
+ZCOLOR
+ZCONTROL
+ZDEVICE
+ZDICT
+ZDPS1
+ZFILE
+ZFILEIO
+ZFILTER
+ZFILTER2
+ZFONT
+ZFONT0
+ZFONT1
+ZFONT2
+ZGENERIC
+ZGSTATE
+ZHT
+ZMATH
+ZMATRIX
+ZMISC
+ZPACKED
+ZPAINT
+ZPATH
+ZPATH2
+ZPROPS
+ZRELBIT
+ZSTACK
+ZSTRING
+ZTYPE
+ZUPATH
+ZVMEM
+$ !
+$ !
+$ ! NOW COMPILE AWAY!
+$ !
+$ OPEN/READ MODULE_LIST MODULES.LIS
+$ !
+$ COMPILE_LOOP:
+$ READ/END=END_COMPILE MODULE_LIST MODULE
+$ GCC'CDEF/NOLIST/OBJECT='MODULE'.OBJ 'MODULE'.C
+$ LIBRARY/INSERT GS.OLB 'MODULE'.OBJ
+$ DELETE 'MODULE'.OBJ.*
+$ GOTO COMPILE_LOOP
+$ !
+$ END_COMPILE:
+$ CLOSE MODULE_LIST
+$ DELETE MODULES.LIS.*
+$ !
+$ !
+$ ! Is the DECwindows environment about?  Must be installed in order to
+$ ! build the executable programs gs.exe, gt.exe, and xlib.exe.
+$ !
+$ IF F$SEARCH("SYS$SHARE:DECW$XLIBSHR.EXE") .NES. "" THEN GOTO CHECK2
+$ WRITE SYS$OUTPUT "DECwindows user environment not installed;"
+$ WRITE SYS$OUTPUT "unable to build executable programs."
+$ GOTO DONE
+$ !
+$ CHECK2:
+$ IF F$TRNLNM("DECW$INCLUDE") .NES. "" THEN GOTO BUILD_EXES
+$ WRITE SYS$OUTPUT "You must invoke @DECW$STARTUP before using this"
+$ WRITE SYS$OUTPUT "command procedure to build the executable programs."
+$ GOTO DONE
+$ !
+$ !
+$ BUILD_EXES:
+$ !
+$ LIBDEF = """GS_LIB_DEFAULT=""""" + ''GS_LIB_DEFAULT' + """"""""
+$ INIDEF = """GS_INIT=""""" + ''GS_INIT' + """"""""
+$ GCC'CDEF/NOLIST/DEFINE=('LIBDEF','INIDEF')/OBJECT=GCONFIG.OBJ GCONFIG.C
+$ GCC'CDEF/NOLIST/INCLUDE_DIRECTORY='F$TRNLNM("SYS$COMMON") -
+    /OBJECT=GDEVXINI.OBJ GDEVXINI.C
+$ GCC'CDEF/NOLIST/INCLUDE_DIRECTORY='F$TRNLNM("SYS$COMMON")/OBJECT=GDEVX.OBJ -
+    GDEVX.C
+$ GCC'CDEF/NOLIST/OBJECT=GSMAIN.OBJ GSMAIN.C
+$ GCC'CDEF/NOLIST/OBJECT=UTRACE.OBJ UTRACE.C
+$ !
+$ GCC'CDEF/NOLIST/OBJECT=GS.OBJ GS.C
+$ LINK'LDEF/NOMAP/EXE=GS.EXE GS,GSMAIN,UTRACE,GDEVX,GCONFIG,-
+  GS/LIB/INCLUDE=(GDEVMEM1,GDEVMEM2,GDEVMEM3,GXCLIST,-
+  ZARITH,ZARRAY,ZBSEQ,ZCHAR,ZCOLOR,ZCONTROL,ZDEVICE,ZDPS1,-
+  ZDICT,ZFILE,ZFILEIO,ZFILTER,ZFILTER2,ZFONT,ZFONT0,ZFONT1,ZFONT2,-
+  ZGENERIC,ZGSTATE,ZHT,ZMATH,ZMATRIX,ZMISC,ZPACKED,ZPAINT,ZPATH,ZPATH2,-
+  ZPROPS,ZRELBIT,ZSTACK,ZSTRING,ZTYPE,ZUPATH,ZVMEM),SYS$INPUT/OPT
+SYS$SHARE:DECW$DWTLIBSHR/SHARE
+$ !
+$ DELETE GDEVX.OBJ.*,GDEVXINI.OBJ.*,GSMAIN.OBJ.*,UTRACE.OBJ.*,GS.OBJ.*,-
+         GCONFIG.OBJ.*
+$ !
+$ DONE:
+$ ! ALL DONE