+
+#>y.#>fr /boot
+fsd(0,0)/etc
+
+Boot
+: dk(0,0)vdformat
+50176+14336+776780 start 0x1000
+VDFORMAT Version 3.0
+
+controller 0: smd
+controller 1: smd-e
+
+Type `Help' for help, `Start' to execute operations.
+
+vdformat> help
+ The following commands are available:
+ KILL - Abort all operations.
+ STATus - Display formatter state.
+ RESET - Reinitialize VDFORMAT, and start over.
+ EXIT - Terminate program.
+ List - List operations specified so far.
+ Delete - Delete specific operations.
+ Format - Format and verify disk surface.
+ Verify - Destructively verify disk surface.
+ Relocate - Add known flaws to bad sector map.
+ Correct - Correct erroneous relocations or drive ID.
+ Info - Display known disk information.
+ Profile - Display seek profile graph of disk.
+ Exercise - Perform seek exercises on disk.
+ STARt - Start operations.
+
+vdformat> format
+ Format on which controllers? 1
+ Drives on controller 1? 0
+ Number of patterns to use while verifying? 1
+ Drive type for controller 1, drive 0? egl
+ Module serial number for controller 1, drive 0? 1
+vdformat> list
+ The following operations will occur when Start is issued:
+ Format: Controller 1, drive 0, type EGL.
+vdformat> info
+ Info on which controllers? 0
+ Drives on controller 0? 0
+ Drive type for controller 0, drive 0? fsd
+vdformat> list
+ The following operations will occur when Start is issued:
+ Info: Controller 0, drive 0, type FSD.
+ Format: Controller 1, drive 0, type EGL.
+vdformat> help
+ The following commands are available:
+ KILL - Abort all operations.
+ STATus - Display formatter state.
+ RESET - Reinitialize VDFORMAT, and start over.
+ EXIT - Terminate program.
+ List - List operations specified so far.
+ Delete - Delete specific operations.
+ Format - Format and verify disk surface.
+ Verify - Destructively verify disk surface.
+ Relocate - Add known flaws to bad sector map.
+ Correct - Correct erroneous relocations or drive ID.
+ Info - Display known disk information.
+ Profile - Display seek profile graph of disk.
+ Exercise - Perform seek exercises on disk.
+ STARt - Start operations.
+
+vdformat> delete
+ 0) Info: Controller 0, drive 0, type FSD.
+ 1) Format: Controller 1, drive 0, type EGL.
+ Delete line? 0
+ Line 0 has been deleted.
+ Delete line?
+ Delete line?
+ Delete line?
+ Delete line? -1
+ Line 1 has been deleted.
+ Delete line? ?
+ The following commands are available:
+ STATus - Display formatter state.
+ QUIT - Terminate current operation.
+ Any line number between 0 and 1 may be entered.
+ Delete line? q
+ Delete line? quit
+ Confirm quit operations? [Yes/No] yes
+vdformat> format
+ Format on which controllers? 1
+ Drives on controller 1? 0
+ Number of patterns to use while verifying? 1
+ Drive type for controller 1, drive 0? (EGL)
+ Module serial number for controller 1, drive 0? (1)
+vdformat> list
+ The following operations will occur when Start is issued:
+ Format: Controller 1, drive 0, type EGL.
+vdformat> start
+stat Starting format on controller 1, drive 0, type EGL.
+us
+ Formatting on controller 1, drive 0.
+ Currently accessing cylinder 841, head 1.
+ Currently determining drive state.
+ Module serial numbers do not match!
+ Use `info' to find the real serial number.
+vdformat> info
+ Info on which controllers? 1
+ Drives on controller 1? 0
+ Drive type for controller 1, drive 0? (EGL)
+vdformat> list
+ The following operations will occur when Start is issued:
+ Info: Controller 1, drive 0, type EGL.
+vdformat> start
+ Gathering information for controller 1, drive 0.
+
+ Module serial number is 98765.
+ Drive type is EGL.
+ Drive contains a bad sector map.
+ The following sector is known to be bad:
+ cyl 840, head 9, pos 14550, len 1 (Sector #739619) -> Sector 736560.
+ Information display completed successfully.
+vdformat> format
+ Format on which controllers? 1
+ Drives on controller 1? 0
+ Number of patterns to use while verifying? 1
+ Drive type for controller 1, drive 0? (EGL)
+ Module serial number for controller 1, drive 0? (1) 98765
+vdformat> start
+ Starting format on controller 1, drive 0, type EGL.
+Starting format on system areas
+Starting format on data area
+Starting verify on system areas
+Starting verify on data area
+ Error at sector 651795 (cyl 740 trk 13 sect 23),
+ status=40d00000<CPDCRT,SFTERR,ANYERR,COMPLETE>, ecode=0x4d.
+ Sector will be relocated.
+vdformat> quit
+Confirm quit operations? [Yes/No] y
+vdformat> quit
+Confirm quit operations? [Yes/No] yes
+vdformat>