+# Makefile for GAS.
+# Copyright (C) 1989, Free Software Foundation
+#
+# This file is part of GAS, the GNU Assembler.
+#
+# GAS is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 1, or (at your option)
+# any later version.
+#
+# GAS is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GAS; see the file COPYING. If not, write to
+# the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
+
+# This makefile may be used to make the VAX, 68020, 80386,
+# SPARC, ns32k, or i860 assembler(s).
+
+BINDIR = /usr/local/bin
+#CC=gcc
+
+# If you are on a BSD system, un-comment the next two lines, and comment out
+# the lines for SystemV and HPUX below
+G0 = -g -I. #-O -Wall
+LDFLAGS = $(CFLAGS)
+#
+# To compile gas on a System Five machine, comment out the two lines above
+# and un-comment out the next three lines
+# Comment out the -lPW on the LOADLIBES line if you are using GCC.
+# G0 = -g -I. -DUSG
+# LDFLAGS = $(CFLAGS)
+# LOADLIBES = -lmalloc -lPW
+#
+# To compile gas for HPUX, link m-hpux.h to m68k.h , and un-comment the
+# next two lines. (If you are using GCC, comment out the alloca.o part)
+# (Get alloca from the emacs distribution, or use GCC.)
+# HPUX 7.0 may have a bug in setvbuf. gas gives an error message like
+# 1:"Unknown operator" -- Statement 'NO_APP' ignored
+# if setvbuf is broken. Re-compile input-file.c (and only input-file.c
+# with -DVMS and the problem should go away.
+#
+# G0 = -g -I. -DUSG
+# LOADLIBES = alloca.o
+#
+# To compile gas for a Sequent Symmetry, comment out all the above lines,
+# and un-comment the next two lines.
+# G0 = -g -I. -DUSE_SYSTEM_HDR -DEXEC_VERSION=1
+# LOADLIBES = -lc /usr/att/lib/libc.a
+
+# If you just want to compile the vax assembler, type 'make avax'
+
+# If you just want to compile the i386 assembler, type 'make a386'
+
+# If you just want to compile the ns32k assembler, type 'make a32k'
+
+# If you just want to compile the sparc assembler, type 'make asparc'
+
+# If you just want to compile the mc68020 assembler, make sure m68k.h
+# is correctly set up, and type type 'make a68' (Except on HPUX machines,
+# where you will have to make the changes marked below before typing
+# 'make a68'
+# m68k.h should be a symbolic or hard-link to one of
+# m-sun3.h , m-hpux.h or m-generic.h
+# depending on which machine you want to compile the 68020 assembler for.
+#
+# If you want the 68k assembler to be completely compatable with the the
+# SUN one, un-comment the -DSUN_ASM_SYNTAX line below.
+#
+# If you machine does not have vfprintf, but does have _doprnt(),
+# remove the # from the -DNO_VARARGS line below.
+#
+# If the return-type of a signal-hander is void (instead of int),
+# remove the # from the -DSIGTY line below.
+#
+# To include the mc68851 mmu coprocessor instructions in the 68020 assembler,
+# remove the # from the -Dm68851 line below.
+#
+# If you want the 68020 assembler use a register prefix character, un-comment
+# the REGISTER_PREFIX line, and (maybe) change the '%' to the appropriate
+# character.
+#
+# If you want the assembler to treat .L* or ..* symbols as local, instead of
+# the usual L* symbols, un-comment the DOT_LABEL_PREFIX line.
+#
+# If you want the 80386 assembler to correctly handle fsub/fsubr and fdiv/fdivr
+# opcodes (unlike most 80386 assemblers), remove the # from
+# the -DNON_BROKEN_WORDS line below.
+#
+# To compile 80386 Gas for the Sequent Symmetry, un-comment the -DEXEC_VERSION
+# and the -DUSE_SYSTEM_HDR lines below.
+#
+# To compile gas for the HP 9000/300 un-comment the -DUSE_HP_HDR line below.
+#
+# For the ns32k, the options are 32532 or 32032 CPU and 32381 or 32081 FPU.
+# To select the NS32532, remove the # from the -DNS32532 line below.
+# To compile in tne NS32381 opcodes in addition to the NS32081 opcodes
+# (the 32381 is a superset of the 32081), remove the # from the -DNS32381
+# line below.
+#
+# For the ns32k on a Sequent, uncomment the SEQUENT_COMPATABILITY line below.
+#
+# If you want the .align N directive to align to the next N byte boundry,
+# instead of the next 1<<N boundry, un-comment the OTHER_ALIGN line below.
+# (This option is automatically enabled when building the sparc assembler.
+#
+
+O1 = -DNO_VARARGS
+O2 = # -DNON_BROKEN_WORDS
+O3 = # -Dm68851
+O4 = # -DEXEC_VERSION=1
+O5 = # -DSIGTY=void
+O6 = # -DNS32532
+O6 = # -DNS32381
+O7 = # -DDOT_LABEL_PREFIX
+O8 = # -DSEQUENT_COMPATABILITY
+O9 = # -DREGISTER_PREFIX=\'%\'
+O10= # -DOTHER_ALIGN
+
+G1 = # -DUSE_SYSTEM_HDR
+G2 = # -DUSE_HP_HDR
+G3 = # -DSUN_ASM_SYNTAX
+
+OPTIONS = $(O1) $(O2) $(O3) $(O4) $(O5) $(O6) $(O7) $(O8) $(O9) $(O10)
+
+CFLAGS = $(G0) $(G1) $(G2) $(G3) $(G4)
+
+#
+# To make the 68020 assembler compile as the default, un-comment the next
+# line, and comment out all the other lines that start with DEFAULT_GAS
+DEFAULT_GAS=a68
+#
+# To make the VAX assembler compile as the default, un-comment the next
+# line and commment out all the other lines that start with DEFAULT_GAS
+#DEFAULT_GAS=avax
+#
+# To make the 80386 assembler compile as the default, un-comment the next
+# line and commment out all the other lines that start with DEFAULT_GAS
+#DEFAULT_GAS=a386
+#
+# To make the ns32k assembler compile as the default, un-comment the next
+# line and commment out all the other lines that start with DEFAULT_GAS
+#DEFAULT_GAS=a32k
+#
+# To make the sparc assembler compile as the default, un-comment the next
+# line and commment out all the other lines that start with DEFAULT_GAS
+#DEFAULT_GAS=asparc
+#
+# To make the i860 assembler compile as the default, un-comment the next
+# line and comment out all the other lines that start with DEFAULT_GAS
+#DEFAULT_GAS=a860
+
+# Global Sources -------------------------------------------------------------
+
+a =\
+as.o xrealloc.o xmalloc.o hash.o hex-value.o \
+atof-generic.o append.o messages.o expr.o app.o \
+frags.o input-file.o input-scrub.o output-file.o \
+subsegs.o symbols.o version.o \
+flonum-const.o flonum-copy.o flonum-mult.o strstr.o bignum-copy.o \
+obstack.o
+#gdb.o gdb-file.o gdb-symbols.o gdb-blocks.o gdb-lines.o
+
+a: $(DEFAULT_GAS)
+ @rm -f a
+ @ln $(DEFAULT_GAS) a
+
+# I860 GAS ------------------------------------------------------------------
+u = i860.o atof-ieee.o write-i860.o read-i860.o
+
+U = i860.c i860.h i860-opcode.h
+
+i860.o: i860.c i860.h i860-opcode.h as.h frags.h struc-symbol.h
+i860.o: flonum.h expr.h hash.h md.h write.h read.h symbols.h
+ $(CC) -c $(CFLAGS) -DI860 i860.c
+
+atof-ieee.o: flonum.h
+
+write-i860.o: write.c i860.h
+ $(CC) -c -DI860 $(CFLAGS) write.c
+ mv write.o write-i860.o
+
+read-i860.o: read.c i860.h
+ $(CC) -c -DI860 $(CFLAGS) read.c
+ mv read.o read-i860.o
+
+a860: $a $u
+ $(CC) -o a860 $(LDFLAGS) $a $u $(LOADLIBES)
+
+# SPARC GAS ------------------------------------------------------------------
+v = sparc.o atof-ieee.o write-sparc.o read-sparc.o
+
+V = sparc.c sparc.h sparc-opcode.h
+
+atof-ieee.o: flonum.h
+sparc.o: sparc.c sparc.h sparc-opcode.h as.h frags.h struc-symbol.h
+sparc.o: flonum.h expr.h hash.h md.h write.h read.h symbols.h
+ $(CC) -c $(CFLAGS) -DSPARC sparc.c
+
+write-sparc.o: write.c
+ $(CC) -c -DSPARC $(CFLAGS) write.c
+ mv write.o write-sparc.o
+
+read-sparc.o: read.c
+ $(CC) -c -DSPARC $(CFLAGS) read.c
+ mv read.o read-sparc.o
+
+asparc: $a $v
+ $(CC) -o asparc $(LDFLAGS) $a $v $(LOADLIBES)
+
+# NS32K GAS ------------------------------------------------------------------
+w = ns32k.o atof-ieee.o write-ns32k.o read-ns32k.o
+
+W = ns32k.c ns32k-opcode.h
+
+atof-ieee.o: flonum.h
+ns32k.o: as.h frags.h struc-symbol.h flonum.h expr.h md.h hash.h
+ns32k.o: write.h symbols.h ns32k-opcode.h ns32k.c
+ $(CC) $(CFLAGS) $(OPTIONS) -c ns32k.c
+
+write-ns32k.o: write.c
+ $(CC) -c -DNS32K $(CFLAGS) write.c
+ mv write.o write-ns32k.o
+
+read-ns32k.o:
+ $(CC) -c -DNS32K $(CFLAGS) read.c
+ mv read.o read-ns32k.o
+
+a32k: $a $w
+ $(CC) -o a32k $(LDFLAGS) $a $w $(LOADLIBES)
+
+# 80386 GAS ------------------------------------------------------------------
+x = i386.o atof-ieee.o write.o read.o
+
+X = i386.c i386.h i386-opcode.h
+
+i386.o: i386.c as.h read.h flonum.h frags.h struc-symbol.h expr.h
+i386.o: symbols.h hash.h md.h i386.h i386-opcode.h
+ $(CC) $(CFLAGS) $(OPTIONS) -c i386.c
+
+atof-ieee.o: flonum.h
+
+a386: $a $x
+ $(CC) -o a386 $(LDFLAGS) $a $x $(LOADLIBES)
+
+# 68020 GAS ------------------------------------------------------------------
+y = m68k.o atof-ieee.o write.o read.o
+
+Y = m68k.c atof-ieee.c m68k-opcode.h m-hpux.h m-sun3.h m-generic.h
+
+atof-ieee.o: flonum.h
+
+m68k.o: m68k.c a.out.gnu.h as.h expr.h flonum.h frags.h hash.h
+m68k.o: m68k-opcode.h m68k.h md.h obstack.h struc-symbol.h
+ $(CC) $(CFLAGS) $(OPTIONS) -c m68k.c
+
+a68: $a $y
+ $(CC) -o a68 $(LDFLAGS) $a $y $(LOADLIBES)
+
+# VAX GAS --------------------------------------------------------------------
+z = vax.o atof-vax.o write.o read.o
+
+Z = vax.c atof-vax.c vax-opcode.h vax-inst.h \
+ make-gas.com objrecdef.h vms.c vms-dbg.c README-vms-dbg
+
+vax.o: vax.c a.out.gnu.h as.h expr.h flonum.h frags.h md.h obstack.h
+vax.o: read.h struc-symbol.h symbols.h vax-inst.h vax-opcode.h
+atof-vax.o: as.h flonum.h read.h
+
+avax: $a $z
+ $(CC) -o avax $(LDFLAGS) $a $z $(LOADLIBES)
+
+# global files ---------------------------------------------------------------
+
+as.o: as.c
+ $(CC) $(CFLAGS) $(OPTIONS) -c as.c
+
+messages.o: messages.c
+ $(CC) $(CFLAGS) $(OPTIONS) -c messages.c
+
+hash.o: hash.c
+ $(CC) $(CFLAGS) -Derror=as_fatal -c hash.c
+
+xmalloc.o: xmalloc.c
+ $(CC) $(CFLAGS) -Derror=as_fatal -c xmalloc.c
+
+xrealloc.o: xrealloc.c
+ $(CC) $(CFLAGS) -Derror=as_fatal -c xrealloc.c
+
+A =\
+as.c xrealloc.c xmalloc.c hash.c hex-value.c \
+atof-generic.c append.c messages.c expr.c bignum-copy.c \
+frags.c input-file.c input-scrub.c output-file.c read.c \
+subsegs.c symbols.c write.c strstr.c \
+flonum-const.c flonum-copy.c flonum-mult.c app.c version.c \
+obstack.c \
+#gdb.c gdb-file.c gdb-symbols.c gdb-blocks.c \
+#gdb-lines.c
+
+H = \
+a.out.gnu.h as.h bignum.h expr.h flonum.h \
+frags.h hash.h input-file.h md.h \
+obstack.h read.h struc-symbol.h subsegs.h \
+symbols.h write.h
+
+dist: COPYING README ChangeLog $A $H $Z $Y $X $W $V $U Makefile
+ echo gas-`sed -n -e '/ version /s/[^0-9.]*\([0-9.]*\).*/\1/p' < version.c` > .fname
+ mkdir `cat .fname`
+
+ ln COPYING README ChangeLog $A $H $Z $Y $X $W $V $U Makefile `cat .fname`
+ tar cvhZf `cat .fname`.tar.Z `cat .fname`
+ -rm -r `cat .fname`
+ -rm .fname
+
+clean:
+ rm -f a avax a68 a386 a32k asparc $a $v $w $x $y $z a core gmon.out bugs a.out
+
+install: a
+ cp a $(BINDIR)/gas
+
+
+# General .o-->.h dependencies
+
+app.o: as.h
+as.o: a.out.gnu.h as.h read.h struc-symbol.h write.h
+atof-generic.o: flonum.h
+bignum-copy.o: bignum.h
+expr.o: a.out.gnu.h as.h expr.h flonum.h obstack.h read.h struc-symbol.h
+expr.o: symbols.h
+flonum-const.o: flonum.h
+flonum-copy.o: flonum.h
+flonum-mult.o: flonum.h
+flonum-normal.o:flonum.h
+flonum-print.o: flonum.h
+frags.o: a.out.gnu.h as.h frags.h obstack.h struc-symbol.h subsegs.h
+#gdb.o: as.h
+#gdb-blocks.o: as.h
+#gdb-lines.o: as.h frags.h obstack.h
+#gdb-symbols.o: a.out.gnu.h as.h struc-symbol.h
+hash.o: hash.h
+input-file.o: input-file.h
+input-scrub.o: as.h input-file.h read.h
+messages.o: as.h
+obstack.o: obstack.h
+read.o: a.out.gnu.h as.h expr.h flonum.h frags.h hash.h md.h obstack.h
+read.o: read.h struc-symbol.h symbols.h
+subsegs.o: a.out.gnu.h as.h frags.h obstack.h struc-symbol.h subsegs.h write.h
+symbols.o: a.out.gnu.h as.h frags.h hash.h obstack.h struc-symbol.h symbols.h
+write.o: a.out.gnu.h as.h md.h obstack.h struc-symbol.h subsegs.h
+write.o: symbols.h write.h
+
+flonum.h: bignum.h
+
projects / unix-history / commitdiff