+/* Parameters for execution on a 68000 series machine.
+ Copyright 1986, 1987, 1989, 1990, 1992 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */
+
+/* Generic 68000 stuff, to be included by other tm-*.h files.
+ Define HAVE_68881 if that is the case. */
+
+#if defined (HAVE_68881)
+#define IEEE_FLOAT 1
+#endif
+
+/* Define the bit, byte, and word ordering of the machine. */
+#define TARGET_BYTE_ORDER BIG_ENDIAN
+
+/* Offset from address of function to start of its code.
+ Zero on most machines. */
+
+#define FUNCTION_START_OFFSET 0
+
+/* Advance PC across any function entry prologue instructions
+ to reach some "real" code. */
+
+#if !defined(SKIP_PROLOGUE)
+#define SKIP_PROLOGUE(ip) {(ip) = m68k_skip_prologue(ip);}
+extern CORE_ADDR m68k_skip_prologue PARAMS ((CORE_ADDR ip));
+#endif
+
+/* Immediately after a function call, return the saved pc.
+ Can't always go through the frames for this because on some machines
+ the new frame is not set up until the new function executes
+ some instructions. */
+
+#define SAVED_PC_AFTER_CALL(frame) \
+read_memory_integer (read_register (SP_REGNUM), 4)
+
+/* Stack grows downward. */
+
+#define INNER_THAN <
+
+/* Sequence of bytes for breakpoint instruction.
+ This is a TRAP instruction. The last 4 bits (0xf below) is the
+ vector. Systems which don't use 0xf should define BPT_VECTOR
+ themselves before including this file. */
+
+#if !defined (BPT_VECTOR)
+#define BPT_VECTOR 0xf
+#endif
+
+#if !defined (BREAKPOINT)
+#define BREAKPOINT {0x4e, (0x40 | BPT_VECTOR)}
+#endif
+
+/* If your kernel resets the pc after the trap happens you may need to
+ define this before including this file. */
+
+#if !defined (DECR_PC_AFTER_BREAK)
+#define DECR_PC_AFTER_BREAK 2
+#endif
+
+/* Nonzero if instruction at PC is a return instruction. */
+/* Allow any of the return instructions, including a trapv and a return
+ from interupt. */
+
+#define ABOUT_TO_RETURN(pc) ((read_memory_integer (pc, 2) & ~0x3) == 0x4e74)
+
+/* Return 1 if P points to an invalid floating point value. */
+
+#define INVALID_FLOAT(p, len) 0 /* Just a first guess; not checked */
+
+/* Say how long registers are. */
+
+#define REGISTER_TYPE long
+
+#if defined (HAVE_68881)
+# if defined (GDB_TARGET_IS_SUN3)
+ /* Sun3 status includes fpflags, which shows whether the FPU has been used
+ by the process, and whether the FPU was done with an instruction or
+ was interrupted in the middle of a long instruction. See
+ <machine/reg.h>. */
+ /* a&d, pc,sr, fp, fpstat, fpflags */
+# define NUM_REGS 31
+# define REGISTER_BYTES (16*4 + 8 + 8*12 + 3*4 + 4)
+# else /* Not sun3. */
+# define NUM_REGS 29
+# define REGISTER_BYTES (16*4 + 8 + 8*12 + 3*4)
+# endif /* Not sun3. */
+#else /* No 68881. */
+# define NUM_REGS 18
+# define REGISTER_BYTES (16*4 + 8)
+#endif /* No 68881. */
+
+/* Index within `registers' of the first byte of the space for
+ register N. */
+
+#if defined (HAVE_68881)
+#define REGISTER_BYTE(N) \
+ ((N) >= FPC_REGNUM ? (((N) - FPC_REGNUM) * 4) + 168 \
+ : (N) >= FP0_REGNUM ? (((N) - FP0_REGNUM) * 12) + 72 \
+ : (N) * 4)
+
+/* Number of bytes of storage in the actual machine representation
+ for register N. On the 68000, all regs are 4 bytes
+ except the floating point regs which are 12 bytes. */
+/* Note that the unsigned cast here forces the result of the
+ subtraction to very high positive values if N < FP0_REGNUM */
+
+#define REGISTER_RAW_SIZE(N) (((unsigned)(N) - FP0_REGNUM) < 8 ? 12 : 4)
+
+/* Number of bytes of storage in the program's representation
+ for register N. On the 68000, all regs are 4 bytes
+ except the floating point regs which are 8-byte doubles. */
+
+#define REGISTER_VIRTUAL_SIZE(N) (((unsigned)(N) - FP0_REGNUM) < 8 ? 8 : 4)
+
+/* Largest value REGISTER_RAW_SIZE can have. */
+
+#define MAX_REGISTER_RAW_SIZE 12
+
+/* Largest value REGISTER_VIRTUAL_SIZE can have. */
+
+#define MAX_REGISTER_VIRTUAL_SIZE 8
+
+/* Nonzero if register N requires conversion
+ from raw format to virtual format. */
+
+#define REGISTER_CONVERTIBLE(N) (((unsigned)(N) - FP0_REGNUM) < 8)
+
+/* Put the declaration out here because if it's in the macros, PCC
+ will complain. */
+extern const struct ext_format ext_format_68881;
+
+/* Convert data from raw format for register REGNUM
+ to virtual format for register REGNUM. */
+
+#define REGISTER_CONVERT_TO_VIRTUAL(REGNUM,FROM,TO) \
+{ \
+ if ((REGNUM) >= FP0_REGNUM && (REGNUM) < FPC_REGNUM) \
+ ieee_extended_to_double (&ext_format_68881, (FROM), (double *)(TO)); \
+ else \
+ memcpy ((TO), (FROM), 4); \
+}
+
+/* Convert data from virtual format for register REGNUM
+ to raw format for register REGNUM. */
+
+#define REGISTER_CONVERT_TO_RAW(REGNUM,FROM,TO) \
+{ \
+ if ((REGNUM) >= FP0_REGNUM && (REGNUM) < FPC_REGNUM) \
+ double_to_ieee_extended (&ext_format_68881, (double *)(FROM), (TO)); \
+ else \
+ memcpy ((TO), (FROM), 4); \
+}
+
+/* Return the GDB type object for the "standard" data type
+ of data in register N. */
+/* Note, for registers which contain addresses return
+ pointer to void, not pointer to char, because we don't
+ want to attempt to print the string after printing the address. */
+#define REGISTER_VIRTUAL_TYPE(N) \
+ (((unsigned)(N) - FP0_REGNUM) < 8 ? builtin_type_double : \
+ (N) == PC_REGNUM || (N) == FP_REGNUM || (N) == SP_REGNUM ? \
+ lookup_pointer_type (builtin_type_void) : builtin_type_int)
+
+#else /* no 68881. */
+/* Index within `registers' of the first byte of the space for
+ register N. */
+
+#define REGISTER_BYTE(N) ((N) * 4)
+
+/* Number of bytes of storage in the actual machine representation
+ for register N. On the 68000, all regs are 4 bytes. */
+
+#define REGISTER_RAW_SIZE(N) 4
+
+/* Number of bytes of storage in the program's representation
+ for register N. On the 68000, all regs are 4 bytes. */
+
+#define REGISTER_VIRTUAL_SIZE(N) 4
+
+/* Largest value REGISTER_RAW_SIZE can have. */
+
+#define MAX_REGISTER_RAW_SIZE 4
+
+/* Largest value REGISTER_VIRTUAL_SIZE can have. */
+
+#define MAX_REGISTER_VIRTUAL_SIZE 4
+
+/* Nonzero if register N requires conversion
+ from raw format to virtual format. */
+
+#define REGISTER_CONVERTIBLE(N) 0
+
+/* Convert data from raw format for register REGNUM
+ to virtual format for register REGNUM. */
+
+#define REGISTER_CONVERT_TO_VIRTUAL(REGNUM,FROM,TO) memcpy ((TO), (FROM), 4);
+
+/* Convert data from virtual format for register REGNUM
+ to raw format for register REGNUM. */
+
+#define REGISTER_CONVERT_TO_RAW(REGNUM,FROM,TO) memcpy ((TO), (FROM), 4);
+
+/* Return the GDB type object for the "standard" data type
+ of data in register N. */
+
+#define REGISTER_VIRTUAL_TYPE(N) builtin_type_int
+
+#endif /* No 68881. */
+
+/* Initializer for an array of names of registers.
+ Entries beyond the first NUM_REGS are ignored. */
+
+#define REGISTER_NAMES \
+ {"d0", "d1", "d2", "d3", "d4", "d5", "d6", "d7", \
+ "a0", "a1", "a2", "a3", "a4", "a5", "fp", "sp", \
+ "ps", "pc", \
+ "fp0", "fp1", "fp2", "fp3", "fp4", "fp5", "fp6", "fp7", \
+ "fpcontrol", "fpstatus", "fpiaddr", "fpcode", "fpflags" }
+
+/* Register numbers of various important registers.
+ Note that some of these values are "real" register numbers,
+ and correspond to the general registers of the machine,
+ and some are "phony" register numbers which are too large
+ to be actual register numbers as far as the user is concerned
+ but do serve to get the desired values when passed to read_register. */
+
+#define A1_REGNUM 9
+#define FP_REGNUM 14 /* Contains address of executing stack frame */
+#define SP_REGNUM 15 /* Contains address of top of stack */
+#define PS_REGNUM 16 /* Contains processor status */
+#define PC_REGNUM 17 /* Contains program counter */
+#if defined (HAVE_68881)
+#define FP0_REGNUM 18 /* Floating point register 0 */
+#define FPC_REGNUM 26 /* 68881 control register */
+#define FPS_REGNUM 27 /* 68881 status register */
+#define FPI_REGNUM 28 /* 68881 iaddr register */
+#endif /* 68881. */
+
+/* Store the address of the place in which to copy the structure the
+ subroutine will return. This is called from call_function. */
+
+#define STORE_STRUCT_RETURN(ADDR, SP) \
+ { write_register (A1_REGNUM, (ADDR)); }
+
+/* Extract from an array REGBUF containing the (raw) register state
+ a function return value of type TYPE, and copy that, in virtual format,
+ into VALBUF. This is assuming that floating point values are returned
+ as doubles in d0/d1. */
+
+#if !defined (EXTRACT_RETURN_VALUE)
+#define EXTRACT_RETURN_VALUE(TYPE,REGBUF,VALBUF) \
+ memcpy ((VALBUF), \
+ (char *)(REGBUF) + \
+ (TYPE_LENGTH(TYPE) >= 4 ? 0 : 4 - TYPE_LENGTH(TYPE)), \
+ TYPE_LENGTH(TYPE))
+#endif
+
+/* Write into appropriate registers a function return value
+ of type TYPE, given in virtual format. Assumes floats are passed
+ in d0/d1. */
+
+#if !defined (STORE_RETURN_VALUE)
+#define STORE_RETURN_VALUE(TYPE,VALBUF) \
+ write_register_bytes (0, VALBUF, TYPE_LENGTH (TYPE))
+#endif
+
+/* Extract from an array REGBUF containing the (raw) register state
+ the address in which a function should return its structure value,
+ as a CORE_ADDR (or an expression that can be used as one). */
+
+#define EXTRACT_STRUCT_VALUE_ADDRESS(REGBUF) (*(CORE_ADDR *)(REGBUF))
+\f
+/* Describe the pointer in each stack frame to the previous stack frame
+ (its caller). */
+
+/* FRAME_CHAIN takes a frame's nominal address and produces the frame's
+ chain-pointer.
+ In the case of the 68000, the frame's nominal address
+ is the address of a 4-byte word containing the calling frame's address. */
+
+#define FRAME_CHAIN(thisframe) (FRAME_ADDR)m68k_frame_chain(thisframe)
+
+/* Define other aspects of the stack frame. */
+
+/* A macro that tells us whether the function invocation represented
+ by FI does not have a frame on the stack associated with it. If it
+ does not, FRAMELESS is set to 1, else 0. */
+#define FRAMELESS_FUNCTION_INVOCATION(FI, FRAMELESS) \
+ (FRAMELESS) = frameless_look_for_prologue(FI)
+
+#define FRAME_SAVED_PC(FRAME) (read_memory_integer ((FRAME)->frame + 4, 4))
+
+#define FRAME_ARGS_ADDRESS(fi) ((fi)->frame)
+
+#define FRAME_LOCALS_ADDRESS(fi) ((fi)->frame)
+
+/* Set VAL to the number of args passed to frame described by FI.
+ Can set VAL to -1, meaning no way to tell. */
+
+/* We can't tell how many args there are
+ now that the C compiler delays popping them. */
+#if !defined (FRAME_NUM_ARGS)
+#define FRAME_NUM_ARGS(val,fi) (val = -1)
+#endif
+
+/* Return number of bytes at start of arglist that are not really args. */
+
+#define FRAME_ARGS_SKIP 8
+
+/* Put here the code to store, into a struct frame_saved_regs,
+ the addresses of the saved registers of frame described by FRAME_INFO.
+ This includes special registers such as pc and fp saved in special
+ ways in the stack frame. sp is even more special:
+ the address we return for it IS the sp for the next frame. */
+
+#if !defined (FRAME_FIND_SAVED_REGS)
+#if defined (HAVE_68881)
+#define FRAME_FIND_SAVED_REGS(frame_info, frame_saved_regs) \
+{ register int regnum; \
+ register int regmask; \
+ register CORE_ADDR next_addr; \
+ register CORE_ADDR pc; \
+ int nextinsn; \
+ bzero (&frame_saved_regs, sizeof frame_saved_regs); \
+ if ((frame_info)->pc >= (frame_info)->frame - CALL_DUMMY_LENGTH - FP_REGNUM*4 - 8*12 - 4 \
+ && (frame_info)->pc <= (frame_info)->frame) \
+ { next_addr = (frame_info)->frame; \
+ pc = (frame_info)->frame - CALL_DUMMY_LENGTH - FP_REGNUM * 4 - 8*12 - 4; }\
+ else \
+ { pc = get_pc_function_start ((frame_info)->pc); \
+ /* Verify we have a link a6 instruction next; \
+ if not we lose. If we win, find the address above the saved \
+ regs using the amount of storage from the link instruction. */\
+ if (044016 == read_memory_integer (pc, 2)) \
+ next_addr = (frame_info)->frame + read_memory_integer (pc += 2, 4), pc+=4; \
+ else if (047126 == read_memory_integer (pc, 2)) \
+ next_addr = (frame_info)->frame + read_memory_integer (pc += 2, 2), pc+=2; \
+ else goto lose; \
+ /* If have an addal #-n, sp next, adjust next_addr. */ \
+ if ((0177777 & read_memory_integer (pc, 2)) == 0157774) \
+ next_addr += read_memory_integer (pc += 2, 4), pc += 4; \
+ } \
+ /* next should be a moveml to (sp) or -(sp) or a movl r,-(sp) */ \
+ regmask = read_memory_integer (pc + 2, 2); \
+ /* But before that can come an fmovem. Check for it. */ \
+ nextinsn = 0xffff & read_memory_integer (pc, 2); \
+ if (0xf227 == nextinsn \
+ && (regmask & 0xff00) == 0xe000) \
+ { pc += 4; /* Regmask's low bit is for register fp7, the first pushed */ \
+ for (regnum = FP0_REGNUM + 7; regnum >= FP0_REGNUM; regnum--, regmask >>= 1) \
+ if (regmask & 1) \
+ (frame_saved_regs).regs[regnum] = (next_addr -= 12); \
+ regmask = read_memory_integer (pc + 2, 2); } \
+ if (0044327 == read_memory_integer (pc, 2)) \
+ { pc += 4; /* Regmask's low bit is for register 0, the first written */ \
+ for (regnum = 0; regnum < 16; regnum++, regmask >>= 1) \
+ if (regmask & 1) \
+ (frame_saved_regs).regs[regnum] = (next_addr += 4) - 4; } \
+ else if (0044347 == read_memory_integer (pc, 2)) \
+ { pc += 4; /* Regmask's low bit is for register 15, the first pushed */ \
+ for (regnum = 15; regnum >= 0; regnum--, regmask >>= 1) \
+ if (regmask & 1) \
+ (frame_saved_regs).regs[regnum] = (next_addr -= 4); } \
+ else if (0x2f00 == (0xfff0 & read_memory_integer (pc, 2))) \
+ { regnum = 0xf & read_memory_integer (pc, 2); pc += 2; \
+ (frame_saved_regs).regs[regnum] = (next_addr -= 4); } \
+ /* fmovemx to index of sp may follow. */ \
+ regmask = read_memory_integer (pc + 2, 2); \
+ nextinsn = 0xffff & read_memory_integer (pc, 2); \
+ if (0xf236 == nextinsn \
+ && (regmask & 0xff00) == 0xf000) \
+ { pc += 10; /* Regmask's low bit is for register fp0, the first written */ \
+ for (regnum = FP0_REGNUM + 7; regnum >= FP0_REGNUM; regnum--, regmask >>= 1) \
+ if (regmask & 1) \
+ (frame_saved_regs).regs[regnum] = (next_addr += 12) - 12; \
+ regmask = read_memory_integer (pc + 2, 2); } \
+ /* clrw -(sp); movw ccr,-(sp) may follow. */ \
+ if (0x426742e7 == read_memory_integer (pc, 4)) \
+ (frame_saved_regs).regs[PS_REGNUM] = (next_addr -= 4); \
+ lose: ; \
+ (frame_saved_regs).regs[SP_REGNUM] = (frame_info)->frame + 8; \
+ (frame_saved_regs).regs[FP_REGNUM] = (frame_info)->frame; \
+ (frame_saved_regs).regs[PC_REGNUM] = (frame_info)->frame + 4; \
+}
+#else /* no 68881. */
+#define FRAME_FIND_SAVED_REGS(frame_info, frame_saved_regs) \
+{ register int regnum; \
+ register int regmask; \
+ register CORE_ADDR next_addr; \
+ register CORE_ADDR pc; \
+ bzero (&frame_saved_regs, sizeof frame_saved_regs); \
+ if ((frame_info)->pc >= (frame_info)->frame - CALL_DUMMY_LENGTH - FP_REGNUM*4 - 4 \
+ && (frame_info)->pc <= (frame_info)->frame) \
+ { next_addr = (frame_info)->frame; \
+ pc = (frame_info)->frame - CALL_DUMMY_LENGTH - FP_REGNUM * 4 - 4; }\
+ else \
+ { pc = get_pc_function_start ((frame_info)->pc); \
+ /* Verify we have a link a6 instruction next; \
+ if not we lose. If we win, find the address above the saved \
+ regs using the amount of storage from the link instruction. */\
+ if (044016 == read_memory_integer (pc, 2)) \
+ next_addr = (frame_info)->frame + read_memory_integer (pc += 2, 4), pc+=4; \
+ else if (047126 == read_memory_integer (pc, 2)) \
+ next_addr = (frame_info)->frame + read_memory_integer (pc += 2, 2), pc+=2; \
+ else goto lose; \
+ /* If have an addal #-n, sp next, adjust next_addr. */ \
+ if ((0177777 & read_memory_integer (pc, 2)) == 0157774) \
+ next_addr += read_memory_integer (pc += 2, 4), pc += 4; \
+ } \
+ /* next should be a moveml to (sp) or -(sp) or a movl r,-(sp) */ \
+ regmask = read_memory_integer (pc + 2, 2); \
+ if (0044327 == read_memory_integer (pc, 2)) \
+ { pc += 4; /* Regmask's low bit is for register 0, the first written */ \
+ for (regnum = 0; regnum < 16; regnum++, regmask >>= 1) \
+ if (regmask & 1) \
+ (frame_saved_regs).regs[regnum] = (next_addr += 4) - 4; } \
+ else if (0044347 == read_memory_integer (pc, 2)) \
+ { pc += 4; /* Regmask's low bit is for register 15, the first pushed */ \
+ for (regnum = 15; regnum >= 0; regnum--, regmask >>= 1) \
+ if (regmask & 1) \
+ (frame_saved_regs).regs[regnum] = (next_addr -= 4); } \
+ else if (0x2f00 == (0xfff0 & read_memory_integer (pc, 2))) \
+ { regnum = 0xf & read_memory_integer (pc, 2); pc += 2; \
+ (frame_saved_regs).regs[regnum] = (next_addr -= 4); } \
+ /* clrw -(sp); movw ccr,-(sp) may follow. */ \
+ if (0x426742e7 == read_memory_integer (pc, 4)) \
+ (frame_saved_regs).regs[PS_REGNUM] = (next_addr -= 4); \
+ lose: ; \
+ (frame_saved_regs).regs[SP_REGNUM] = (frame_info)->frame + 8; \
+ (frame_saved_regs).regs[FP_REGNUM] = (frame_info)->frame; \
+ (frame_saved_regs).regs[PC_REGNUM] = (frame_info)->frame + 4; \
+}
+#endif /* no 68881. */
+#endif /* no FIND_FRAME_SAVED_REGS. */
+
+\f
+/* Things needed for making the inferior call functions.
+ It seems like every m68k based machine has almost identical definitions
+ in the individual machine's configuration files. Most other cpu types
+ (mips, i386, etc) have routines in their *-tdep.c files to handle this
+ for most configurations. The m68k family should be able to do this as
+ well. These macros can still be overridden when necessary. */
+
+/* The CALL_DUMMY macro is the sequence of instructions, as disassembled
+ by gdb itself:
+
+ fmovemx fp0-fp7,sp@- 0xf227 0xe0ff
+ moveml d0-a5,sp@- 0x48e7 0xfffc
+ clrw sp@- 0x4267
+ movew ccr,sp@- 0x42e7
+
+ /..* The arguments are pushed at this point by GDB;
+ no code is needed in the dummy for this.
+ The CALL_DUMMY_START_OFFSET gives the position of
+ the following jsr instruction. *../
+
+ jsr @#0x32323232 0x4eb9 0x3232 0x3232
+ addal #0x69696969,sp 0xdffc 0x6969 0x6969
+ trap #<your BPT_VECTOR number here> 0x4e4?
+ nop 0x4e71
+
+ Note this is CALL_DUMMY_LENGTH bytes (28 for the above example).
+ We actually start executing at the jsr, since the pushing of the
+ registers is done by PUSH_DUMMY_FRAME. If this were real code,
+ the arguments for the function called by the jsr would be pushed
+ between the moveml and the jsr, and we could allow it to execute through.
+ But the arguments have to be pushed by GDB after the PUSH_DUMMY_FRAME is
+ done, and we cannot allow the moveml to push the registers again lest
+ they be taken for the arguments. */
+
+#if defined (HAVE_68881)
+
+#define CALL_DUMMY {0xf227e0ff, 0x48e7fffc, 0x426742e7, 0x4eb93232, 0x3232dffc, 0x69696969, (0x4e404e71 | (BPT_VECTOR << 16))}
+#define CALL_DUMMY_LENGTH 28 /* Size of CALL_DUMMY */
+#define CALL_DUMMY_START_OFFSET 12 /* Offset to jsr instruction*/
+
+#else
+
+#define CALL_DUMMY {0x48e7fffc, 0x426742e7, 0x4eb93232, 0x3232dffc, 0x69696969, (0x4e404e71 | (BPT_VECTOR << 16))}
+#define CALL_DUMMY_LENGTH 24 /* Size of CALL_DUMMY */
+#define CALL_DUMMY_START_OFFSET 8 /* Offset to jsr instruction*/
+
+#endif /* HAVE_68881 */
+
+/* Insert the specified number of args and function address
+ into a call sequence of the above form stored at DUMMYNAME.
+ We use the BFD routines to store a big-endian value of known size. */
+
+#define FIX_CALL_DUMMY(dummyname, pc, fun, nargs, args, type, gcc_p) \
+{ _do_putb32 (fun, (char *) dummyname + CALL_DUMMY_START_OFFSET + 2); \
+ _do_putb32 (nargs*4, (char *) dummyname + CALL_DUMMY_START_OFFSET + 8); }
+
+/* Push an empty stack frame, to record the current PC, etc. */
+
+#define PUSH_DUMMY_FRAME { m68k_push_dummy_frame (); }
+
+extern void m68k_push_dummy_frame PARAMS ((void));
+
+extern void m68k_pop_frame PARAMS ((void));
+
+/* Discard from the stack the innermost frame, restoring all registers. */
+
+#define POP_FRAME { m68k_pop_frame (); }
+
+/* Offset from SP to first arg on stack at first instruction of a function */
+
+#define SP_ARG0 (1 * 4)
+
+#ifdef KERNELDEBUG
+extern int kernel_debugging;
+#undef FRAME_CHAIN_VALID
+#define FRAME_CHAIN_VALID(chain, thisframe) \
+ (chain != 0 && \
+ kernel_debugging ? inside_kernstack(chain) : \
+ (!inside_entry_file(FRAME_SAVED_PC(thisframe))))
+
+extern int Xkernel_xfer_memory();
+#define KERNEL_XFER_MEMORY Xkernel_xfer_memory
+#endif
projects / unix-history / commitdiff