+# Copyright (C) 1989, 1992 Aladdin Enterprises. All rights reserved.
+# Distributed by Free Software Foundation, Inc.
+#
+# This file is part of Ghostscript.
+#
+# Ghostscript is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY. No author or distributor accepts responsibility
+# to anyone for the consequences of using it or for whether it serves any
+# particular purpose or works at all, unless he says so in writing. Refer
+# to the Ghostscript General Public License for full details.
+#
+# Everyone is granted permission to copy, modify and redistribute
+# Ghostscript, but only under the conditions described in the Ghostscript
+# General Public License. A copy of this license is supposed to have been
+# given to you along with Ghostscript so you can know your rights and
+# responsibilities. It should be in a file named COPYING. Among other
+# things, the copyright notice and this notice must be preserved on all
+# copies.
+
+# makefile for Ghostscript device drivers.
+
+# -------------------------------- Catalog ------------------------------- #
+
+# It is possible to build Ghostscript with an arbitrary collection of
+# device drivers, although some drivers are supported only on a subset
+# of the target platforms. The currently available drivers are:
+
+# Displays:
+# MS-DOS EGA and VGA:
+# ega EGA (640x350, 16-color)
+# vga VGA (640x480, 16-color)
+# MS-DOS SuperVGA:
+# + atiw ATI Wonder SuperVGA, 256-color modes
+# * mdb10 EIZO MDB-10 (1024 x 768)
+# tseng SuperVGA using Tseng Labs ET3000/4000 chips, 256-color modes
+# tseng16 Tseng Labs SuperVGA in 800x600, 16-color mode (256K memory)
+# + tvga16 Trident SuperVGA in 800x600, 16-color mode (256K memory)
+# ****** NOTE: the vesa device does not work with the Watcom (32-bit MS-DOS)
+# ****** compiler or executable.
+# vesa SuperVGA with VESA standard API driver
+# MS-DOS other:
+# bgi Borland Graphics Interface (CGA and Hercules)
+# * pe Private Eye
+# Unix and VMS:
+# * sonyfb Sony Microsystems monochrome display [Sony only]
+# * sunview SunView window system [SunOS only]
+# x11 X Windows version 11, release >=3 [Unix and VMS only]
+# Printers:
+# bj10e Canon BubbleJet BJ10e
+# * cdeskjet H-P DeskJet 500C
+# + deskjet H-P DeskJet and DeskJet Plus
+# * dfaxhigh DigiBoard, Inc.'s DigiFAX software format (high resolution)
+# * dfaxlow DigiFAX low (normal) resolution
+# djet500 H-P DeskJet 500
+# * djet500c H-P DeskJet 500C
+# epson Epson-compatible dot matrix printers (9- or 24-pin)
+# * epsonc Epson LQ-2550 and Fujitsu 3400/2400/1200 color printers
+# + laserjet H-P LaserJet
+# * lbp8 Canon LBP-8II laser printer
+# * ln03 DEC LN03 printer [Ultrix only?]
+# + ljet2p H-P LaserJet IId/IIp/III* with TIFF compression
+# + ljet3 H-P LaserJet III* with Delta Row compression
+# * ljetplus H-P LaserJet Plus
+# * nwp533 Sony Microsystems NWP533 laser printer [Sony only]
+# paintjet H-P PaintJet color printer
+# * r4081 Ricoh 4081 laser printer
+# * trufax TruFax facsimile driver [Unix only]
+# File formats and others:
+# bit A "bit bucket" device for time benchmarking
+# gifmono Monochrome GIF file format
+# gif8 8-bit color GIF file format
+# pcxmono Monochrome PCX file format
+# pcx16 Older color PCX file format (EGA/VGA, 16-color)
+# pcx256 Newer color PCX file format (256-color)
+# pbm Portable Bitmap (plain format)
+# pbmraw Portable Bitmap (raw format)
+# pgm Portable Graymap (plain format)
+# pgmraw Portable Graymap (raw format)
+# ppm Portable Pixmap (plain format)
+# ppmraw Portable Pixmap (raw format)
+
+# User-contributed drivers marked with * require hardware or software
+# that is not available to Aladdin Enterprises. Please contact the
+# original contributors, not Aladdin Enterprises, if you have questions.
+# Contact information appears in the driver entry below.
+#
+# Drivers marked with a + are maintained by Aladdin Enterprises with
+# the assistance of users, since Aladdin Enterprises doesn't have access to
+# the hardware for these either.
+
+# If you add drivers, it would be nice if you kept each list
+# in alphabetical order.
+
+# Each platform-specific makefile contains a line of the form
+# DEVICE_DEVS=<dev1>.dev ... <devn>.dev
+# where dev1 ... devn are the devices to be included in the build.
+# You may edit this line to select any desired set of devices.
+# dev1 will be used as the default device (unless overridden from
+# the command line with -sDEVICE=xxx, of course.) If you can't fit all the
+# devices on a single line, you may add lines defining
+# DEVICE_DEVS2=<dev21>.dev ... <dev2n>.dev
+# DEVICE_DEVS3=<dev31>.dev ... <dev3n>.dev
+# etc. up to DEVICE_DEVS5.
+# Don't use continuation lines, since this may break the MS-DOS command
+# processor.
+
+# ---------------------------- End of catalog ---------------------------- #
+
+# If you want to add a new device driver, the examples below should be
+# enough of a guide to the correct form for the makefile rules.
+
+# All device drivers depend on the following:
+GDEV=$(AK) $(gx_h) $(gxdevice_h)
+
+###### ------------------- MS-DOS display devices ------------------- ######
+
+# There are really only two drivers: an EGA/VGA driver (4 bit-planes,
+# plane-addressed) and a SuperVGA driver (8 bit-planes, byte addressed).
+
+### ----------------------- EGA and VGA displays ----------------------- ###
+
+gdevegaa.$(OBJ): gdevegaa.asm
+
+ETEST=ega.$(OBJ) $(ega_)
+ega.exe: $(ETEST) libc$(MM).tr
+ tlink /m /l $(LIBDIR)\c0$(MM) @ega.tr @libc$(MM).tr
+
+ega.$(OBJ): ega.c $(GDEV)
+
+# The shared MS-DOS makefile defines PCFBASM as either gdevegaa.$(OBJ)
+# or an empty string.
+
+EGAVGA=gdevpcfb.$(OBJ) $(PCFBASM)
+
+gdevpcfb.$(OBJ): gdevpcfb.c $(GDEV) $(MAKEFILE) $(dos__h)
+ $(CCC) -DUSE_ASM=0$(USE_ASM) gdevpcfb.c
+
+# The EGA/VGA family includes: EGA, VGA, MDB-10, and the
+# Tseng ET3000/4000 and Trident SuperVGA in 16-color mode.
+
+ega.dev: $(EGAVGA)
+ $(SHP)gssetdev ega $(EGAVGA)
+
+vga.dev: $(EGAVGA)
+ $(SHP)gssetdev vga $(EGAVGA)
+
+mdb10.dev: $(EGAVGA)
+ $(SHP)gssetdev mdb10 $(EGAVGA)
+
+tseng16.dev: $(EGAVGA)
+ $(SHP)gssetdev tseng16 $(EGAVGA)
+
+tvga16.dev: $(EGAVGA)
+ $(SHP)gssetdev tvga16 $(EGAVGA)
+
+### ------------------------- SuperVGA displays ------------------------ ###
+
+SVGA=gdevsvga.$(OBJ) $(PCFBASM)
+
+gdevsvga.$(OBJ): gdevsvga.c $(GDEV) $(MAKEFILE) $(dos__h)
+ $(CCC) -DUSE_ASM=0$(USE_ASM) gdevsvga.c
+
+# The SuperVGA family includes: ATI Wonder, Tseng ET3000/4000, and VESA.
+
+atiw.dev: $(SVGA)
+ $(SHP)gssetdev atiw $(SVGA)
+
+tseng.dev: $(SVGA)
+ $(SHP)gssetdev tseng $(SVGA)
+
+vesa.dev: $(SVGA)
+ $(SHP)gssetdev vesa $(SVGA)
+
+### ------------ The BGI (Borland Graphics Interface) device ----------- ###
+
+# We should use an implicit rule for running bgiobj,
+# but a bug in Borland's `make' utility makes this not work.
+
+cga.$(OBJ): $(BGIDIR)\cga.bgi
+ $(BGIDIR)\bgiobj $(BGIDIR)\$&
+
+egavga.$(OBJ): $(BGIDIR)\egavga.bgi
+ $(BGIDIR)\bgiobj $(BGIDIR)\$&
+
+herc.$(OBJ): $(BGIDIR)\herc.bgi
+ $(BGIDIR)\bgiobj $(BGIDIR)\$&
+
+# Include egavga.$(OBJ) for debugging only.
+bgi_=gdevbgi.$(OBJ) cga.$(OBJ) herc.$(OBJ)
+bgi.dev: $(bgi_)
+ $(SHP)gssetdev bgi $(bgi_)
+ $(SHP)gsaddmod bgi -lib $(LIBDIR)\graphics
+
+gdevbgi.$(OBJ): gdevbgi.c $(GDEV) $(MAKEFILE)
+ $(CCC) -DBGI_LIB=$(QQ)$(BGIDIR)$(QQ) gdevbgi.c
+
+###### ------------------- The Private Eye display ------------------- ######
+### Note: this driver was contributed by a user: ###
+### please contact narf@media-lab.media.mit.edu if you have questions. ###
+
+pe_=gdevpe.$(OBJ)
+pe.dev: $(pe_)
+ $(SHP)gssetdev pe $(pe_)
+
+gdevpe.$(OBJ): gdevpe.c $(GDEV)
+
+###### --------------- Memory-buffered printer devices --------------- ######
+
+PDEVH=$(GDEV) $(gxdevmem_h) $(gxclist_h) $(gdevprn_h)
+
+gdevprn.$(OBJ): gdevprn.c $(PDEVH) $(gp_h) $(gsprops_h)
+
+### ----------------- The Canon BubbleJet BJ10e device ----------------- ###
+
+bj10e_=gdevbj10.$(OBJ) gdevprn.$(OBJ)
+bj10e.dev: $(bj10e_)
+ $(SHP)gssetdev bj10e $(bj10e_)
+
+gdevbj10.$(OBJ): gdevbj10.c $(PDEVH)
+
+### -------------------------- The DigiFAX device ----------------------- ###
+### This driver outputs images in a format suitable for use with ###
+### DigiBoard, Inc.'s DigiFAX software. Use -sDEVICE=dfaxhigh for ###
+### high resolution output, -sDEVICE=dfaxlow for normal output. ###
+### Note: this driver was contributed by a user: please contact ###
+### Rick Richardson (rick@digibd.com) if you have questions. ###
+
+digifax_=gdevdfax.$(OBJ) gdevprn.$(OBJ)
+dfaxhigh.dev: $(digifax_)
+ $(SHP)gssetdev dfaxhigh $(digifax_)
+
+dfaxlow.dev: $(digifax_)
+ $(SHP)gssetdev dfaxlow $(digifax_)
+
+gdevdfax.$(OBJ): gdevdfax.c $(GDEV) $(gdevprn_h) gdevdfg3.h
+
+### ----------- The H-P DeskJet and LaserJet printer devices ----------- ###
+
+### These are essentially the same device.
+
+HPPCL=gdevprn.$(OBJ) gdevpcl.$(OBJ)
+HPMONO=gdevdjet.$(OBJ) $(HPPCL)
+
+gdevpcl.$(OBJ): gdevpcl.c $(PDEVH) $(gdevpcl_h)
+
+gdevdjet.$(OBJ): gdevdjet.c $(PDEVH) $(gdevpcl_h)
+
+deskjet.dev: $(HPMONO)
+ $(SHP)gssetdev deskjet $(HPMONO)
+
+djet500.dev: $(HPMONO)
+ $(SHP)gssetdev djet500 $(HPMONO)
+
+laserjet.dev: $(HPMONO)
+ $(SHP)gssetdev laserjet $(HPMONO)
+
+ljetplus.dev: $(HPMONO)
+ $(SHP)gssetdev ljetplus $(HPMONO)
+
+### Selecting ljet2p provides TIFF (mode 2) compression on LaserJet III,
+### IIIp, IIId, IIIsi, IId, and IIp.
+
+ljet2p.dev: $(HPMONO)
+ $(SHP)gssetdev ljet2p $(HPMONO)
+
+### Selecting ljet3 provides Delta Row (mode 3) compression on LaserJet III,
+### IIIp, IIId, IIIsi.
+
+ljet3.dev: $(HPMONO)
+ $(SHP)gssetdev ljet3 $(HPMONO)
+
+### ------------ The H-P DeskJet 500C color printer device -------------- ###
+### Note: there are two different 500C drivers, both contributed by users.###
+### If you have questions about the djet500c driver, ###
+### please contact AKayser@et.tudelft.nl. ###
+### If you have questions about the cdeskjet driver, ###
+### please contact g.cameron@aberdeen.ac.uk. ###
+
+cdeskjet_=gdevcdj.$(OBJ) $(HPPCL)
+cdeskjet.dev: $(cdeskjet_)
+ $(SHP)gssetdev cdeskjet $(cdeskjet_)
+
+gdevcdj.$(OBJ): gdevcdj.c $(PDEVH) $(gdevpcl_h)
+
+djet500c_=gdevdjtc.$(OBJ) $(HPPCL)
+djet500c.dev: $(djet500c_)
+ $(SHP)gssetdev djet500c $(djet500c_)
+
+gdevdjtc.$(OBJ): gdevdjtc.c $(PDEVH) $(gdevpcl_h)
+
+### ----------------- The generic Epson printer device ----------------- ###
+
+epson_=gdevepsn.$(OBJ) gdevprn.$(OBJ)
+epson.dev: $(epson_)
+ $(SHP)gssetdev epson $(epson_)
+
+gdevepsn.$(OBJ): gdevepsn.c $(PDEVH) devs.mak
+
+### -------------- The Epson LQ-2550 color printer device -------------- ###
+### Note: this driver was contributed by users: please contact ###
+### Dave St. Clair (dave@exlog.com) if you have questions. ###
+
+epsonc_=gdevepsc.$(OBJ) gdevprn.$(OBJ)
+epsonc.dev: $(epsonc_)
+ $(SHP)gssetdev epsonc $(epsonc_)
+
+gdevepsc.$(OBJ): gdevepsc.c $(PDEVH) devs.mak
+
+### ------------ The H-P PaintJet color printer device ----------------- ###
+
+paintjet_=gdevpjet.$(OBJ) $(HPPCL)
+paintjet.dev: $(paintjet_)
+ $(SHP)gssetdev paintjet $(paintjet_)
+
+gdevpjet.$(OBJ): gdevpjet.c $(PDEVH) $(gdevpcl_h)
+
+### ----------------- The Canon LBP-8II printer device ----------------- ###
+### Note: this driver was contributed by users: please contact ###
+### Tom Quinn (trq@prg.oxford.ac.uk) if you have questions. ###
+### Note that the standard paper size for this driver is the European ###
+### A4 size, not the American 8.5" x 11" size. ###
+
+lbp8_=gdevlbp8.$(OBJ) gdevprn.$(OBJ)
+lbp8.dev: $(lbp8_)
+ $(SHP)gssetdev lbp8 $(lbp8_)
+
+gdevlbp8.$(OBJ): gdevlbp8.c $(PDEVH)
+
+### ----------------- The DEC LN03 printer device ---------------------- ###
+### Note: this driver was contributed by users: please contact ###
+### Ulrich Mueller (ulm@vsnhd1.cern.ch) if you have questions. ###
+### A more general sixel driver is available from ###
+### Ian MacPhedran (macphed@dvinci.USask.CA). ###
+
+ln03_=gdevln03.$(OBJ) gdevprn.$(OBJ)
+ln03.dev: $(ln03_)
+ $(SHP)gssetdev ln03 $(ln03_)
+
+gdevln03.$(OBJ): gdevln03.c $(PDEVH)
+
+### ------------- The Ricoh 4081 laser printer device ------------------ ###
+### Note: this driver was contributed by users: ###
+### please contact kdw@oasis.icl.co.uk if you have questions. ###
+
+r4081_=gdev4081.$(OBJ) gdevprn.$(OBJ)
+r4081.dev: $(r4081_)
+ $(SHP)gssetdev r4081 $(r4081_)
+
+gdev4081.$(OBJ): gdev4081.c $(PDEVH)
+
+###### ------------------------ Sony devices ------------------------ ######
+### Note: these drivers were contributed by users: please contact ###
+### Mike Smolenski (mike@intertech.com) if you have questions. ###
+
+### ------------------- Sony NeWS frame buffer device ------------------ ###
+
+sonyfb_=gdevsnfb.$(OBJ) gdevprn.$(OBJ)
+sonyfb.dev: $(sonyfb_)
+ $(SHP)gssetdev sonyfb $(sonyfb_)
+
+gdevsnfb.$(OBJ): gdevsnfb.c $(PDEVH)
+
+### -------------------- Sony NWP533 printer device -------------------- ###
+
+nwp533_=gdevn533.$(OBJ) gdevprn.$(OBJ)
+nwp533.dev: $(nwp533_)
+ $(SHP)gssetdev nwp533 $(nwp533_)
+
+gdevn533.$(OBJ): gdevn533.c $(PDEVH)
+
+###### --------------------- The SunView device --------------------- ######
+### Note: this driver is maintained by a user: if you have questions, ###
+### please contact Andreas Stolcke (stolcke@icsi.berkeley.edu). ###
+
+sunview_=gdevsun.$(OBJ)
+sunview.dev: $(sunview_)
+ $(SHP)gssetdev sunview $(sunview_)
+ $(SHP)gsaddmod sunview -lib suntool sunwindow pixrect
+
+gdevsun.$(OBJ): gdevsun.c $(GDEV) $(arch_h)
+
+### ----------------- The TruFax facsimile device ---------------------- ###
+### Note: this driver was contributed by users: please contact ###
+### Neil Ostroff (nao@maestro.bellcore.com) if you have questions. ###
+### Note that the driver requires a file encode_l.o supplied by the ###
+### makers of the TruFax product. ###
+
+trufax_=gdevtrfx.$(OBJ) gdevprn.$(OBJ) encode_l.$(OBJ)
+trufax.dev: $(trufax_)
+ $(SHP)gssetdev trufax $(trufax_)
+
+gdevtrfx.$(OBJ): gdevtrfx.c $(GDEV)
+
+###### ----------------------- The X11 device ----------------------- ######
+
+# Aladdin Enterprises does not support Ghostview. For more information
+# about Ghostview, please contact Tim Theisen (ghostview@cs.wisc.edu).
+
+x11_=gdevx.$(OBJ) gdevxini.$(OBJ)
+x11.dev: $(x11_)
+ $(SHP)gssetdev x11 $(x11_)
+ $(SHP)gsaddmod x11 -lib X11
+
+# See the main makefile for the definition of XINCLUDE.
+GDEVX=$(GDEV) x_.h gdevx.h $(MAKEFILE)
+gdevx.$(OBJ): gdevx.c $(GDEVX)
+ $(CCC) $(XINCLUDE) gdevx.c
+
+gdevxini.$(OBJ): gdevxini.c $(GDEVX)
+ $(CCC) $(XINCLUDE) gdevxini.c
+
+### ---------------------- The bit bucket device ----------------------- ###
+
+bit_=gdevbit.$(OBJ) gdevprn.$(OBJ)
+bit.dev: $(bit_)
+ $(SHP)gssetdev bit $(bit_)
+
+gdevbit.$(OBJ): gdevbit.c $(PDEVH)
+
+###### ----------------------- PC file formats ---------------------- ######
+
+gdevpccm.$(OBJ): gdevpccm.c $(gs_h) $(gsmatrix_h) $(gxdevice_h) $(gdevpccm_h)
+
+### ------------------------- GIF file formats ------------------------- ###
+
+GIF=gdevgif.$(OBJ) gdevpccm.$(OBJ) gdevprn.$(OBJ)
+
+gdevgif.$(OBJ): gdevgif.c $(PDEVH) $(gdevpccm_h)
+
+gifmono.dev: $(GIF)
+ $(SHP)gssetdev gifmono $(GIF)
+
+gif8.dev: $(GIF)
+ $(SHP)gssetdev gif8 $(GIF)
+
+### ------------------------- PCX file formats ------------------------- ###
+
+PCX=gdevpcx.$(OBJ) gdevpccm.$(OBJ) gdevprn.$(OBJ)
+
+gdevpcx.$(OBJ): gdevpcx.c $(PDEVH) $(gdevpccm_h)
+
+pcxmono.dev: $(PCX)
+ $(SHP)gssetdev pcxmono $(PCX)
+
+pcx16.dev: $(PCX)
+ $(SHP)gssetdev pcx16 $(PCX)
+
+pcx256.dev: $(PCX)
+ $(SHP)gssetdev pcx256 $(PCX)
+
+###### ------------------- Portable Bitmap devices ------------------ ######
+### For more information, see the pbm(5), pgm(5), and ppm(5) man pages. ###
+
+PXM=gdevpbm.$(OBJ) gdevprn.$(OBJ)
+
+gdevpbm.$(OBJ): gdevpbm.c $(PDEVH) $(gxlum_h)
+
+### Portable Bitmap (PBM, plain or raw format, magic numbers "P1" or "P4")
+
+pbm.dev: $(PXM)
+ $(SHP)gssetdev pbm $(PXM)
+
+pbmraw.dev: $(PXM)
+ $(SHP)gssetdev pbmraw $(PXM)
+
+### Portable Graymap (PGM, plain or raw format, magic numbers "P2" or "P5")
+
+pgm.dev: $(PXM)
+ $(SHP)gssetdev pgm $(PXM)
+
+pgmraw.dev: $(PXM)
+ $(SHP)gssetdev pgmraw $(PXM)
+
+### Portable Pixmap (PPM, plain or raw format, magic numbers "P3" or "P6")
+
+ppm.dev: $(PXM)
+ $(SHP)gssetdev ppm $(PXM)
+
+ppmraw.dev: $(PXM)
+ $(SHP)gssetdev ppmraw $(PXM)
projects / unix-history / commitdiff